diff options
Diffstat (limited to 'arch/arm/mach-ux500/devices-db8500.c')
| -rw-r--r-- | arch/arm/mach-ux500/devices-db8500.c | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c new file mode 100644 index 00000000000..82290342194 --- /dev/null +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -0,0 +1,216 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/amba/bus.h> + +#include <plat/ste_dma40.h> + +#include <mach/hardware.h> +#include <mach/setup.h> + +#include "ste-dma40-db8500.h" + +static struct nmk_gpio_platform_data u8500_gpio_data[] = { + GPIO_DATA("GPIO-0-31", 0), + GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */ + GPIO_DATA("GPIO-64-95", 64), + GPIO_DATA("GPIO-96-127", 96), /* 98..127 not routed to pin */ + GPIO_DATA("GPIO-128-159", 128), + GPIO_DATA("GPIO-160-191", 160), /* 172..191 not routed to pin */ + GPIO_DATA("GPIO-192-223", 192), + GPIO_DATA("GPIO-224-255", 224), /* 231..255 not routed to pin */ + GPIO_DATA("GPIO-256-288", 256), /* 268..288 not routed to pin */ +}; + +static struct resource u8500_gpio_resources[] = { + GPIO_RESOURCE(0), + GPIO_RESOURCE(1), + GPIO_RESOURCE(2), + GPIO_RESOURCE(3), + GPIO_RESOURCE(4), + GPIO_RESOURCE(5), + GPIO_RESOURCE(6), + GPIO_RESOURCE(7), + GPIO_RESOURCE(8), +}; + +struct platform_device u8500_gpio_devs[] = { + GPIO_DEVICE(0), + GPIO_DEVICE(1), + GPIO_DEVICE(2), + GPIO_DEVICE(3), + GPIO_DEVICE(4), + GPIO_DEVICE(5), + GPIO_DEVICE(6), + GPIO_DEVICE(7), + GPIO_DEVICE(8), +}; + +struct amba_device u8500_ssp0_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "ssp0", + }, + .res = { + .start = U8500_SSP0_BASE, + .end = U8500_SSP0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_SSP0, NO_IRQ }, + /* ST-Ericsson modified id */ + .periphid = SSP_PER_ID, +}; + +static struct resource u8500_i2c0_resources[] = { + [0] = { + .start = U8500_I2C0_BASE, + .end = U8500_I2C0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_I2C0, + .end = IRQ_I2C0, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device u8500_i2c0_device = { + .name = "nmk-i2c", + .id = 0, + .resource = u8500_i2c0_resources, + .num_resources = ARRAY_SIZE(u8500_i2c0_resources), +}; + +static struct resource u8500_i2c4_resources[] = { + [0] = { + .start = U8500_I2C4_BASE, + .end = U8500_I2C4_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_I2C4, + .end = IRQ_I2C4, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device u8500_i2c4_device = { + .name = "nmk-i2c", + .id = 4, + .resource = u8500_i2c4_resources, + .num_resources = ARRAY_SIZE(u8500_i2c4_resources), +}; + +static struct resource dma40_resources[] = { + [0] = { + .start = U8500_DMA_BASE, + .end = U8500_DMA_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "base", + }, + [1] = { + .start = U8500_DMA_LCPA_BASE, + .end = U8500_DMA_LCPA_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "lcpa", + }, + [2] = { + .start = U8500_DMA_LCLA_BASE, + .end = U8500_DMA_LCLA_BASE + 16 * 1024 - 1, + .flags = IORESOURCE_MEM, + .name = "lcla", + }, + [3] = { + .start = IRQ_DMA, + .end = IRQ_DMA, + .flags = IORESOURCE_IRQ} +}; + +/* Default configuration for physcial memcpy */ +struct stedma40_chan_cfg dma40_memcpy_conf_phy = { + .channel_type = (STEDMA40_CHANNEL_IN_PHY_MODE | + STEDMA40_LOW_PRIORITY_CHANNEL | + STEDMA40_PCHAN_BASIC_MODE), + .dir = STEDMA40_MEM_TO_MEM, + + .src_info.endianess = STEDMA40_LITTLE_ENDIAN, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .src_info.psize = STEDMA40_PSIZE_PHY_1, + + .dst_info.endianess = STEDMA40_LITTLE_ENDIAN, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.psize = STEDMA40_PSIZE_PHY_1, + +}; +/* Default configuration for logical memcpy */ +struct stedma40_chan_cfg dma40_memcpy_conf_log = { + .channel_type = (STEDMA40_CHANNEL_IN_LOG_MODE | + STEDMA40_LOW_PRIORITY_CHANNEL | + STEDMA40_LCHAN_SRC_LOG_DST_LOG | + STEDMA40_NO_TIM_FOR_LINK), + .dir = STEDMA40_MEM_TO_MEM, + + .src_info.endianess = STEDMA40_LITTLE_ENDIAN, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .src_info.psize = STEDMA40_PSIZE_LOG_1, + + .dst_info.endianess = STEDMA40_LITTLE_ENDIAN, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.psize = STEDMA40_PSIZE_LOG_1, + +}; + +/* + * Mapping between destination event lines and physical device address. + * The event line is tied to a device and therefor the address is constant. + */ +static const dma_addr_t dma40_tx_map[STEDMA40_NR_DEV]; + +/* Mapping between source event lines and physical device address */ +static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV]; + +/* Reserved event lines for memcpy only */ +static int dma40_memcpy_event[] = { + STEDMA40_MEMCPY_TX_1, + STEDMA40_MEMCPY_TX_2, + STEDMA40_MEMCPY_TX_3, + STEDMA40_MEMCPY_TX_4, +}; + +static struct stedma40_platform_data dma40_plat_data = { + .dev_len = STEDMA40_NR_DEV, + .dev_rx = dma40_rx_map, + .dev_tx = dma40_tx_map, + .memcpy = dma40_memcpy_event, + .memcpy_len = ARRAY_SIZE(dma40_memcpy_event), + .memcpy_conf_phy = &dma40_memcpy_conf_phy, + .memcpy_conf_log = &dma40_memcpy_conf_log, + .llis_per_log = 8, +}; + +struct platform_device u8500_dma40_device = { + .dev = { + .platform_data = &dma40_plat_data, + }, + .name = "dma40", + .id = 0, + .num_resources = ARRAY_SIZE(dma40_resources), + .resource = dma40_resources +}; + +void dma40_u8500ed_fixup(void) +{ + dma40_plat_data.memcpy = NULL; + dma40_plat_data.memcpy_len = 0; + dma40_resources[0].start = U8500_DMA_BASE_ED; + dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1; +} |