diff options
Diffstat (limited to 'arch/arm/mach-ux500/include/mach/hardware.h')
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/hardware.h | 197 |
1 files changed, 97 insertions, 100 deletions
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 04ea836969b..8656379a830 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -23,109 +23,106 @@ /* typesafe io address */ #define __io_address(n) __io(IO_ADDRESS(n)) +/* used by some plat-nomadik code */ +#define io_p2v(n) __io_address(n) -/* - * Base address definitions for U8500 Onchip IPs. All the - * peripherals are contained in a single 1 Mbyte region, with - * AHB peripherals at the bottom and APB peripherals at the - * top of the region. PER stands for PERIPHERAL region which - * itself divided into sub regions. - */ -#define U8500_PER3_BASE 0x80000000 -#define U8500_PER2_BASE 0x80110000 -#define U8500_PER1_BASE 0x80120000 -#define U8500_PER4_BASE 0x80150000 - -#define U8500_PER6_BASE 0xa03c0000 -#define U8500_PER5_BASE 0xa03e0000 -#define U8500_PER7_BASE 0xa03d0000 - -#define U8500_SVA_BASE 0xa0100000 -#define U8500_SIA_BASE 0xa0200000 - -#define U8500_SGA_BASE 0xa0300000 -#define U8500_MCDE_BASE 0xa0350000 -#define U8500_DMA_BASE 0xa0362000 - -#define U8500_SCU_BASE 0xa0410000 -#define U8500_GIC_CPU_BASE 0xa0410100 -#define U8500_TWD_BASE 0xa0410600 -#define U8500_GIC_DIST_BASE 0xa0411000 -#define U8500_L2CC_BASE 0xa0412000 - -#define U8500_TWD_SIZE 0x100 - -/* per7 base addressess */ -#define U8500_CR_BASE (U8500_PER7_BASE + 0x8000) -#define U8500_MTU0_BASE (U8500_PER7_BASE + 0xa000) -#define U8500_MTU1_BASE (U8500_PER7_BASE + 0xb000) -#define U8500_TZPC0_BASE (U8500_PER7_BASE + 0xc000) -#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000) - -/* per6 base addressess */ -#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) -#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) -#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) -#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) -#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) -#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) - -/* per5 base addressess */ -#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) -#define U8500_GPIO5_BASE (U8500_PER5_BASE + 0x1e000) -#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) - -/* per4 base addressess */ -#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x0000) -#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x1000) -#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x2000) -#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x3000) -#define U8500_RTC_BASE (U8500_PER4_BASE + 0x4000) -#define U8500_SCR_BASE (U8500_PER4_BASE + 0x5000) -#define U8500_DMC_BASE (U8500_PER4_BASE + 0x6000) -#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x7000) - -/* per3 base addressess */ -#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) -#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) -#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000) -#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000) -#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000) -#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000) -#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) -#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) -#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xe000) -#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) - -/* per2 base addressess */ -#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) -#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) -#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) -#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000) -#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000) -#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000) -#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000) -#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000) -#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000) -#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000) -#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000) -#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xe000) -#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) - -/* per1 base addresses */ -#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) -#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) -#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) -#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) -#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) -#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) -#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) -#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) -#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xa000) -#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000) -#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) +#include <mach/db8500-regs.h> +#include <mach/db5500-regs.h> + +#ifdef CONFIG_UX500_SOC_DB8500 +#define UX500(periph) U8500_##periph##_BASE +#elif defined(CONFIG_UX500_SOC_DB5500) +#define UX500(periph) U5500_##periph##_BASE +#endif + +#define UX500_BACKUPRAM0_BASE UX500(BACKUPRAM0) +#define UX500_BACKUPRAM1_BASE UX500(BACKUPRAM1) +#define UX500_B2R2_BASE UX500(B2R2) + +#define UX500_CLKRST1_BASE UX500(CLKRST1) +#define UX500_CLKRST2_BASE UX500(CLKRST2) +#define UX500_CLKRST3_BASE UX500(CLKRST3) +#define UX500_CLKRST5_BASE UX500(CLKRST5) +#define UX500_CLKRST6_BASE UX500(CLKRST6) + +#define UX500_DMA_BASE UX500(DMA) +#define UX500_FSMC_BASE UX500(FSMC) + +#define UX500_GIC_CPU_BASE UX500(GIC_CPU) +#define UX500_GIC_DIST_BASE UX500(GIC_DIST) + +#define UX500_I2C1_BASE UX500(I2C1) +#define UX500_I2C2_BASE UX500(I2C2) +#define UX500_I2C3_BASE UX500(I2C3) + +#define UX500_L2CC_BASE UX500(L2CC) +#define UX500_MCDE_BASE UX500(MCDE) +#define UX500_MTU0_BASE UX500(MTU0) +#define UX500_MTU1_BASE UX500(MTU1) +#define UX500_PRCMU_BASE UX500(PRCMU) + +#define UX500_RNG_BASE UX500(RNG) +#define UX500_RTC_BASE UX500(RTC) + +#define UX500_SCU_BASE UX500(SCU) + +#define UX500_SDI0_BASE UX500(SDI0) +#define UX500_SDI1_BASE UX500(SDI1) +#define UX500_SDI2_BASE UX500(SDI2) +#define UX500_SDI3_BASE UX500(SDI3) +#define UX500_SDI4_BASE UX500(SDI4) + +#define UX500_SPI0_BASE UX500(SPI0) +#define UX500_SPI1_BASE UX500(SPI1) +#define UX500_SPI2_BASE UX500(SPI2) +#define UX500_SPI3_BASE UX500(SPI3) + +#define UX500_SIA_BASE UX500(SIA) +#define UX500_SVA_BASE UX500(SVA) + +#define UX500_TWD_BASE UX500(TWD) + +#define UX500_UART0_BASE UX500(UART0) +#define UX500_UART1_BASE UX500(UART1) +#define UX500_UART2_BASE UX500(UART2) + +#define UX500_USBOTG_BASE UX500(USBOTG) /* ST-Ericsson modified pl022 id */ #define SSP_PER_ID 0x01080022 +#ifndef __ASSEMBLY__ + +#include <asm/cputype.h> + +static inline bool cpu_is_u8500(void) +{ +#ifdef CONFIG_UX500_SOC_DB8500 + return 1; +#else + return 0; +#endif +} + +static inline bool cpu_is_u8500ed(void) +{ + return cpu_is_u8500() && (read_cpuid_id() & 15) == 0; +} + +static inline bool cpu_is_u8500v1(void) +{ + return cpu_is_u8500() && (read_cpuid_id() & 15) == 1; +} + +static inline bool cpu_is_u5500(void) +{ +#ifdef CONFIG_UX500_SOC_DB5500 + return 1; +#else + return 0; +#endif +} + +#endif + #endif /* __MACH_HARDWARE_H */ |