diff options
Diffstat (limited to 'arch/arm/mach-ux500')
22 files changed, 1575 insertions, 292 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 03625d74485..6625e5bbf4d 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -1,15 +1,42 @@ -menu "ST-Ericsson platform type" - depends on ARCH_U8500 +if ARCH_U8500 -comment "ST-Ericsson Multicore Mobile Platforms" - -config MACH_U8500_MOP - bool "U8500 Early Development platform" +config UX500_SOC_COMMON + bool default y select ARM_GIC select HAS_MTU + select NOMADIK_GPIO + +config UX500_SOC_DB8500 + bool + +config UX500_SOC_DB5500 + bool + +choice + prompt "Ux500 target platform" + default MACH_U8500_MOP + +config MACH_U8500_MOP + bool "U8500 Development platform" + select UX500_SOC_DB8500 help Include support for mop500 development platform based on U8500 architecture. The platform is based on early drop silicon version of 8500. -endmenu + +config MACH_U5500 + bool "U5500 Development platform" + select UX500_SOC_DB5500 + help + Include support for the U5500 development platform. +endchoice + +config UX500_DEBUG_UART + int "Ux500 UART to use for low-level debug" + default 2 + help + Choose the UART on which kernel low-level debug messages should be + output. + +endif diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 95e6e24c004..c7bc4199e3a 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,7 +2,9 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := clock.o -obj-$(CONFIG_ARCH_U8500) += cpu-u8500.o +obj-y := clock.o cpu.o devices.o +obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o devices-db5500.o +obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o +obj-$(CONFIG_MACH_U5500) += board-u5500.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 803aec1d672..072196c5726 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -17,37 +17,14 @@ #include <linux/amba/pl022.h> #include <linux/spi/spi.h> -#include <asm/localtimer.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <plat/mtu.h> #include <plat/i2c.h> #include <mach/hardware.h> #include <mach/setup.h> - -#define __MEM_4K_RESOURCE(x) \ - .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} - -/* These are active devices on this board */ -static struct amba_device uart0_device = { - .dev = { .init_name = "uart0" }, - __MEM_4K_RESOURCE(U8500_UART0_BASE), - .irq = {IRQ_UART0, NO_IRQ}, -}; - -static struct amba_device uart1_device = { - .dev = { .init_name = "uart1" }, - __MEM_4K_RESOURCE(U8500_UART1_BASE), - .irq = {IRQ_UART1, NO_IRQ}, -}; - -static struct amba_device uart2_device = { - .dev = { .init_name = "uart2" }, - __MEM_4K_RESOURCE(U8500_UART2_BASE), - .irq = {IRQ_UART2, NO_IRQ}, -}; +#include <mach/devices.h> static void ab4500_spi_cs_control(u32 command) { @@ -93,55 +70,8 @@ static struct pl022_ssp_controller ssp0_platform_data = { .num_chipselect = 5, }; -static struct amba_device pl022_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "pl022", - .platform_data = &ssp0_platform_data, - }, - .res = { - .start = U8500_SSP0_BASE, - .end = U8500_SSP0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_SSP0, NO_IRQ }, - /* ST-Ericsson modified id */ - .periphid = SSP_PER_ID, -}; - -static struct amba_device pl031_device = { - .dev = { - .init_name = "pl031", - }, - .res = { - .start = U8500_RTC_BASE, - .end = U8500_RTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_RTC_RTT, NO_IRQ}, -}; - -#define U8500_I2C_RESOURCES(id, size) \ -static struct resource u8500_i2c_resources_##id[] = { \ - [0] = { \ - .start = U8500_I2C##id##_BASE, \ - .end = U8500_I2C##id##_BASE + size - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - [1] = { \ - .start = IRQ_I2C##id, \ - .end = IRQ_I2C##id, \ - .flags = IORESOURCE_IRQ \ - } \ -} - -U8500_I2C_RESOURCES(0, SZ_4K); -U8500_I2C_RESOURCES(1, SZ_4K); -U8500_I2C_RESOURCES(2, SZ_4K); -U8500_I2C_RESOURCES(3, SZ_4K); - #define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \ -static struct nmk_i2c_controller u8500_i2c_##id = { \ +static struct nmk_i2c_controller u8500_i2c##id##_data = { \ /* \ * slave data setup time, which is \ * 250 ns,100ns,10ns which is 14,6,2 \ @@ -169,58 +99,32 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); -#define U8500_I2C_PDEVICE(cid) \ -static struct platform_device i2c_controller##cid = { \ - .name = "nmk-i2c", \ - .id = cid, \ - .num_resources = 2, \ - .resource = u8500_i2c_resources_##cid, \ - .dev = { \ - .platform_data = &u8500_i2c_##cid \ - } \ -} - -U8500_I2C_PDEVICE(0); -U8500_I2C_PDEVICE(1); -U8500_I2C_PDEVICE(2); -U8500_I2C_PDEVICE(3); - static struct amba_device *amba_devs[] __initdata = { - &uart0_device, - &uart1_device, - &uart2_device, - &pl022_device, - &pl031_device, + &ux500_uart0_device, + &ux500_uart1_device, + &ux500_uart2_device, + &u8500_ssp0_device, }; /* add any platform devices here - TODO */ static struct platform_device *platform_devs[] __initdata = { - &i2c_controller0, - &i2c_controller1, - &i2c_controller2, - &i2c_controller3, -}; - -static void __init u8500_timer_init(void) -{ -#ifdef CONFIG_LOCAL_TIMERS - /* Setup the local timer base */ - twd_base = __io_address(U8500_TWD_BASE); -#endif - /* Setup the MTU base */ - mtu_base = __io_address(U8500_MTU0_BASE); - - nmdk_timer_init(); -} - -static struct sys_timer u8500_timer = { - .init = u8500_timer_init, + &u8500_i2c0_device, + &ux500_i2c1_device, + &ux500_i2c2_device, + &ux500_i2c3_device, }; static void __init u8500_init_machine(void) { int i; + u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data; + ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data; + ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data; + ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data; + + u8500_ssp0_device.dev.platform_data = &ssp0_platform_data; + /* Register the active AMBA devices on this board */ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) amba_device_register(amba_devs[i], &iomem_resource); @@ -239,8 +143,8 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") .io_pg_offst = (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc, .boot_params = 0x100, .map_io = u8500_map_io, - .init_irq = u8500_init_irq, + .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ - .timer = &u8500_timer, + .timer = &ux500_timer, .init_machine = u8500_init_machine, MACHINE_END diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c new file mode 100644 index 00000000000..4430e69cf53 --- /dev/null +++ b/arch/arm/mach-ux500/board-u5500.c @@ -0,0 +1,41 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/amba/bus.h> +#include <linux/gpio.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/hardware.h> +#include <mach/devices.h> +#include <mach/setup.h> + +static struct amba_device *amba_board_devs[] __initdata = { + &ux500_uart0_device, + &ux500_uart1_device, + &ux500_uart2_device, +}; + +static void __init u5500_init_machine(void) +{ + u5500_init_devices(); + + amba_add_devices(amba_board_devs, ARRAY_SIZE(amba_board_devs)); +} + +MACHINE_START(U8500, "ST-Ericsson U5500 Platform") + .phys_io = UX500_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(UX500_UART0_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = u5500_map_io, + .init_irq = ux500_init_irq, + .timer = &ux500_timer, + .init_machine = u5500_init_machine, +MACHINE_END diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 8359a73d004..1b2c9890e8b 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2009 ST-Ericsson - * heavily based on realview platform + * Copyright (C) 2009 STMicroelectronics * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,33 +12,130 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/clk.h> -#include <linux/mutex.h> +#include <linux/io.h> #include <asm/clkdev.h> -/* currently the clk structure - * just supports rate. This would - * be extended as and when new devices are - * added - TODO - */ -struct clk { - unsigned long rate; -}; +#include <mach/hardware.h> +#include "clock.h" + +#define PRCC_PCKEN 0x00 +#define PRCC_PCKDIS 0x04 +#define PRCC_KCKEN 0x08 +#define PRCC_KCKDIS 0x0C + +#define PRCM_YYCLKEN0_MGT_SET 0x510 +#define PRCM_YYCLKEN1_MGT_SET 0x514 +#define PRCM_YYCLKEN0_MGT_CLR 0x518 +#define PRCM_YYCLKEN1_MGT_CLR 0x51C +#define PRCM_YYCLKEN0_MGT_VAL 0x520 +#define PRCM_YYCLKEN1_MGT_VAL 0x524 + +#define PRCM_SVAMMDSPCLK_MGT 0x008 +#define PRCM_SIAMMDSPCLK_MGT 0x00C +#define PRCM_SGACLK_MGT 0x014 +#define PRCM_UARTCLK_MGT 0x018 +#define PRCM_MSP02CLK_MGT 0x01C +#define PRCM_MSP1CLK_MGT 0x288 +#define PRCM_I2CCLK_MGT 0x020 +#define PRCM_SDMMCCLK_MGT 0x024 +#define PRCM_SLIMCLK_MGT 0x028 +#define PRCM_PER1CLK_MGT 0x02C +#define PRCM_PER2CLK_MGT 0x030 +#define PRCM_PER3CLK_MGT 0x034 +#define PRCM_PER5CLK_MGT 0x038 +#define PRCM_PER6CLK_MGT 0x03C +#define PRCM_PER7CLK_MGT 0x040 +#define PRCM_LCDCLK_MGT 0x044 +#define PRCM_BMLCLK_MGT 0x04C +#define PRCM_HSITXCLK_MGT 0x050 +#define PRCM_HSIRXCLK_MGT 0x054 +#define PRCM_HDMICLK_MGT 0x058 +#define PRCM_APEATCLK_MGT 0x05C +#define PRCM_APETRACECLK_MGT 0x060 +#define PRCM_MCDECLK_MGT 0x064 +#define PRCM_IPI2CCLK_MGT 0x068 +#define PRCM_DSIALTCLK_MGT 0x06C +#define PRCM_DMACLK_MGT 0x074 +#define PRCM_B2R2CLK_MGT 0x078 +#define PRCM_TVCLK_MGT 0x07C +#define PRCM_UNIPROCLK_MGT 0x278 +#define PRCM_SSPCLK_MGT 0x280 +#define PRCM_RNGCLK_MGT 0x284 +#define PRCM_UICCCLK_MGT 0x27C + +#define PRCM_MGT_ENABLE (1 << 8) + +static DEFINE_SPINLOCK(clocks_lock); + +static void __clk_enable(struct clk *clk) +{ + if (clk->enabled++ == 0) { + if (clk->parent_cluster) + __clk_enable(clk->parent_cluster); + + if (clk->parent_periph) + __clk_enable(clk->parent_periph); + + if (clk->ops && clk->ops->enable) + clk->ops->enable(clk); + } +} int clk_enable(struct clk *clk) { + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); + return 0; } EXPORT_SYMBOL(clk_enable); +static void __clk_disable(struct clk *clk) +{ + if (--clk->enabled == 0) { + if (clk->ops && clk->ops->disable) + clk->ops->disable(clk); + + if (clk->parent_periph) + __clk_disable(clk->parent_periph); + + if (clk->parent_cluster) + __clk_disable(clk->parent_cluster); + } +} + void clk_disable(struct clk *clk) { + unsigned long flags; + + WARN_ON(!clk->enabled); + + spin_lock_irqsave(&clocks_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); } EXPORT_SYMBOL(clk_disable); unsigned long clk_get_rate(struct clk *clk) { - return clk->rate; + unsigned long rate; + + if (clk->ops && clk->ops->get_rate) + return clk->ops->get_rate(clk); + + rate = clk->rate; + if (!rate) { + if (clk->parent_periph) + rate = clk_get_rate(clk->parent_periph); + else if (clk->parent_cluster) + rate = clk_get_rate(clk->parent_cluster); + } + + return rate; } EXPORT_SYMBOL(clk_get_rate); @@ -56,37 +153,373 @@ int clk_set_rate(struct clk *clk, unsigned long rate) } EXPORT_SYMBOL(clk_set_rate); -/* ssp clock */ -static struct clk ssp_clk = { - .rate = 48000000, +static void clk_prcmu_enable(struct clk *clk) +{ + void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE) + + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off; + + writel(1 << clk->prcmu_cg_bit, cg_set_reg); +} + +static void clk_prcmu_disable(struct clk *clk) +{ + void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE) + + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off; + + writel(1 << clk->prcmu_cg_bit, cg_clr_reg); +} + +/* ED doesn't have the combined set/clr registers */ +static void clk_prcmu_ed_enable(struct clk *clk) +{ + void __iomem *addr = __io_address(U8500_PRCMU_BASE) + + clk->prcmu_cg_mgt; + + writel(readl(addr) | PRCM_MGT_ENABLE, addr); +} + +static void clk_prcmu_ed_disable(struct clk *clk) +{ + void __iomem *addr = __io_address(U8500_PRCMU_BASE) + + clk->prcmu_cg_mgt; + + writel(readl(addr) & ~PRCM_MGT_ENABLE, addr); +} + +static struct clkops clk_prcmu_ops = { + .enable = clk_prcmu_enable, + .disable = clk_prcmu_disable, }; -/* fixed clock */ -static struct clk f38_clk = { - .rate = 38400000, +static unsigned int clkrst_base[] = { + [1] = U8500_CLKRST1_BASE, + [2] = U8500_CLKRST2_BASE, + [3] = U8500_CLKRST3_BASE, + [5] = U8500_CLKRST5_BASE, + [6] = U8500_CLKRST6_BASE, + [7] = U8500_CLKRST7_BASE_ED, }; -static struct clk_lookup lookups[] = { - { - /* UART0 */ - .dev_id = "uart0", - .clk = &f38_clk, - }, { /* UART1 */ - .dev_id = "uart1", - .clk = &f38_clk, - }, { /* UART2 */ - .dev_id = "uart2", - .clk = &f38_clk, - }, { /* SSP */ - .dev_id = "pl022", - .clk = &ssp_clk, - } +static void clk_prcc_enable(struct clk *clk) +{ + void __iomem *addr = __io_address(clkrst_base[clk->cluster]); + + if (clk->prcc_kernel != -1) + writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN); + + if (clk->prcc_bus != -1) + writel(1 << clk->prcc_bus, addr + PRCC_PCKEN); +} + +static void clk_prcc_disable(struct clk *clk) +{ + void __iomem *addr = __io_address(clkrst_base[clk->cluster]); + + if (clk->prcc_bus != -1) + writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS); + + if (clk->prcc_kernel != -1) + writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS); +} + +static struct clkops clk_prcc_ops = { + .enable = clk_prcc_enable, + .disable = clk_prcc_disable, +}; + +static struct clk clk_32khz = { + .rate = 32000, +}; + +/* + * PRCMU level clock gating + */ + +/* Bank 0 */ +static DEFINE_PRCMU_CLK(svaclk, 0x0, 2, SVAMMDSPCLK); +static DEFINE_PRCMU_CLK(siaclk, 0x0, 3, SIAMMDSPCLK); +static DEFINE_PRCMU_CLK(sgaclk, 0x0, 4, SGACLK); +static DEFINE_PRCMU_CLK_RATE(uartclk, 0x0, 5, UARTCLK, 38400000); +static DEFINE_PRCMU_CLK(msp02clk, 0x0, 6, MSP02CLK); +static DEFINE_PRCMU_CLK(msp1clk, 0x0, 7, MSP1CLK); /* v1 */ +static DEFINE_PRCMU_CLK_RATE(i2cclk, 0x0, 8, I2CCLK, 48000000); +static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 50000000); +static DEFINE_PRCMU_CLK(slimclk, 0x0, 10, SLIMCLK); +static DEFINE_PRCMU_CLK(per1clk, 0x0, 11, PER1CLK); +static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK); +static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK); +static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK); +static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000); +static DEFINE_PRCMU_CLK_RATE(per7clk, 0x0, 16, PER7CLK, 100000000); +static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK); +static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK); +static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK); +static DEFINE_PRCMU_CLK(hsirxclk, 0x0, 20, HSIRXCLK); +static DEFINE_PRCMU_CLK(hdmiclk, 0x0, 21, HDMICLK); +static DEFINE_PRCMU_CLK(apeatclk, 0x0, 22, APEATCLK); +static DEFINE_PRCMU_CLK(apetraceclk, 0x0, 23, APETRACECLK); +static DEFINE_PRCMU_CLK(mcdeclk, 0x0, 24, MCDECLK); +static DEFINE_PRCMU_CLK(ipi2clk, 0x0, 25, IPI2CCLK); +static DEFINE_PRCMU_CLK(dsialtclk, 0x0, 26, DSIALTCLK); /* v1 */ +static DEFINE_PRCMU_CLK(dmaclk, 0x0, 27, DMACLK); +static DEFINE_PRCMU_CLK(b2r2clk, 0x0, 28, B2R2CLK); +static DEFINE_PRCMU_CLK(tvclk, 0x0, 29, TVCLK); +static DEFINE_PRCMU_CLK(uniproclk, 0x0, 30, UNIPROCLK); /* v1 */ +static DEFINE_PRCMU_CLK_RATE(sspclk, 0x0, 31, SSPCLK, 48000000); /* v1 */ + +/* Bank 1 */ +static DEFINE_PRCMU_CLK(rngclk, 0x4, 0, RNGCLK); /* v1 */ +static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */ + +/* + * PRCC level clock gating + * Format: per#, clk, PCKEN bit, KCKEN bit, parent + */ + +/* Peripheral Cluster #1 */ +static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL); +static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk); +static DEFINE_PRCC_CLK(1, spi3_ed, 7, 7, NULL); +static DEFINE_PRCC_CLK(1, spi3_v1, 7, -1, NULL); +static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(1, msp1_ed, 4, 4, &clk_msp02clk); +static DEFINE_PRCC_CLK(1, msp1_v1, 4, 4, &clk_msp1clk); +static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk); +static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk); +static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk); + +/* Peripheral Cluster #2 */ + +static DEFINE_PRCC_CLK(2, gpio1_ed, 12, -1, NULL); +static DEFINE_PRCC_CLK(2, ssitx_ed, 11, -1, NULL); +static DEFINE_PRCC_CLK(2, ssirx_ed, 10, -1, NULL); +static DEFINE_PRCC_CLK(2, spi0_ed, 9, -1, NULL); +static DEFINE_PRCC_CLK(2, sdi3_ed, 8, 6, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, sdi1_ed, 7, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, msp2_ed, 6, 4, &clk_msp02clk); +static DEFINE_PRCC_CLK(2, sdi4_ed, 4, 2, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, pwl_ed, 3, 1, NULL); +static DEFINE_PRCC_CLK(2, spi1_ed, 2, -1, NULL); +static DEFINE_PRCC_CLK(2, spi2_ed, 1, -1, NULL); +static DEFINE_PRCC_CLK(2, i2c3_ed, 0, 0, &clk_i2cclk); + +static DEFINE_PRCC_CLK(2, gpio1_v1, 11, -1, NULL); +static DEFINE_PRCC_CLK(2, ssitx_v1, 10, 7, NULL); +static DEFINE_PRCC_CLK(2, ssirx_v1, 9, 6, NULL); +static DEFINE_PRCC_CLK(2, spi0_v1, 8, -1, NULL); +static DEFINE_PRCC_CLK(2, sdi3_v1, 7, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, sdi1_v1, 6, 4, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, msp2_v1, 5, 3, &clk_msp02clk); +static DEFINE_PRCC_CLK(2, sdi4_v1, 4, 2, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, pwl_v1, 3, 1, NULL); +static DEFINE_PRCC_CLK(2, spi1_v1, 2, -1, NULL); +static DEFINE_PRCC_CLK(2, spi2_v1, 1, -1, NULL); +static DEFINE_PRCC_CLK(2, i2c3_v1, 0, 0, &clk_i2cclk); + +/* Peripheral Cluster #3 */ +static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL); +static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk); +static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz); +static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp1_ed, 2, 2, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp0_ed, 1, 1, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp1_v1, 2, 2, &clk_sspclk); +static DEFINE_PRCC_CLK(3, ssp0_v1, 1, 1, &clk_sspclk); +static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL); + +/* Peripheral Cluster #4 is in the always on domain */ + +/* Peripheral Cluster #5 */ +static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL); +static DEFINE_PRCC_CLK(5, usb_ed, 0, 0, &clk_i2cclk); +static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL); + +/* Peripheral Cluster #6 */ + +static DEFINE_PRCC_CLK(6, mtu1_v1, 8, -1, NULL); +static DEFINE_PRCC_CLK(6, mtu0_v1, 7, -1, NULL); +static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL); +static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL); +static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL); +static DEFINE_PRCC_CLK(6, unipro_v1, 4, 1, &clk_uniproclk); +static DEFINE_PRCC_CLK(6, cryp1_ed, 4, -1, NULL); +static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL); +static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL); +static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL); +static DEFINE_PRCC_CLK(6, rng_ed, 0, 0, &clk_i2cclk); +static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk); + +/* Peripheral Cluster #7 */ + +static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL); +static DEFINE_PRCC_CLK(7, mtu1_ed, 3, -1, NULL); +static DEFINE_PRCC_CLK(7, mtu0_ed, 2, -1, NULL); +static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL); +static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL); + +static struct clk_lookup u8500_common_clks[] = { + /* Peripheral Cluster #1 */ + CLK(gpio0, "gpio.0", NULL), + CLK(gpio0, "gpio.1", NULL), + CLK(slimbus0, "slimbus0", NULL), + CLK(i2c2, "nmk-i2c.2", NULL), + CLK(sdi0, "sdi0", NULL), + CLK(msp0, "msp0", NULL), + CLK(i2c1, "nmk-i2c.1", NULL), + CLK(uart1, "uart1", NULL), + CLK(uart0, "uart0", NULL), + + /* Peripheral Cluster #3 */ + CLK(gpio2, "gpio.2", NULL), + CLK(gpio2, "gpio.3", NULL), + CLK(gpio2, "gpio.4", NULL), + CLK(gpio2, "gpio.5", NULL), + CLK(sdi5, "sdi5", NULL), + CLK(uart2, "uart2", NULL), + CLK(ske, "ske", NULL), + CLK(sdi2, "sdi2", NULL), + CLK(i2c0, "nmk-i2c.0", NULL), + CLK(fsmc, "fsmc", NULL), + + /* Peripheral Cluster #5 */ + CLK(gpio3, "gpio.8", NULL), + + /* Peripheral Cluster #6 */ + CLK(hash1, "hash1", NULL), + CLK(pka, "pka", NULL), + CLK(hash0, "hash0", NULL), + CLK(cryp0, "cryp0", NULL), + + /* PRCMU level clock gating */ + + /* Bank 0 */ + CLK(svaclk, "sva", NULL), + CLK(siaclk, "sia", NULL), + CLK(sgaclk, "sga", NULL), + CLK(slimclk, "slim", NULL), + CLK(lcdclk, "lcd", NULL), + CLK(bmlclk, "bml", NULL), + CLK(hsitxclk, "stm-hsi.0", NULL), + CLK(hsirxclk, "stm-hsi.1", NULL), + CLK(hdmiclk, "hdmi", NULL), + CLK(apeatclk, "apeat", NULL), + CLK(apetraceclk, "apetrace", NULL), + CLK(mcdeclk, "mcde", NULL), + CLK(ipi2clk, "ipi2", NULL), + CLK(dmaclk, "dma40", NULL), + CLK(b2r2clk, "b2r2", NULL), + CLK(tvclk, "tv", NULL), +}; + +static struct clk_lookup u8500_ed_clks[] = { + /* Peripheral Cluster #1 */ + CLK(spi3_ed, "spi3", NULL), + CLK(msp1_ed, "msp1", NULL), + + /* Peripheral Cluster #2 */ + CLK(gpio1_ed, "gpio.6", NULL), + CLK(gpio1_ed, "gpio.7", NULL), + CLK(ssitx_ed, "ssitx", NULL), + CLK(ssirx_ed, "ssirx", NULL), + CLK(spi0_ed, "spi0", NULL), + CLK(sdi3_ed, "sdi3", NULL), + CLK(sdi1_ed, "sdi1", NULL), + CLK(msp2_ed, "msp2", NULL), + CLK(sdi4_ed, "sdi4", NULL), + CLK(pwl_ed, "pwl", NULL), + CLK(spi1_ed, "spi1", NULL), + CLK(spi2_ed, "spi2", NULL), + CLK(i2c3_ed, "nmk-i2c.3", NULL), + + /* Peripheral Cluster #3 */ + CLK(ssp1_ed, "ssp1", NULL), + CLK(ssp0_ed, "ssp0", NULL), + + /* Peripheral Cluster #5 */ + CLK(usb_ed, "musb_hdrc.0", "usb"), + + /* Peripheral Cluster #6 */ + CLK(dmc_ed, "dmc", NULL), + CLK(cryp1_ed, "cryp1", NULL), + CLK(rng_ed, "rng", NULL), + + /* Peripheral Cluster #7 */ + CLK(tzpc0_ed, "tzpc0", NULL), + CLK(mtu1_ed, "mtu1", NULL), + CLK(mtu0_ed, "mtu0", NULL), + CLK(wdg_ed, "wdg", NULL), + CLK(cfgreg_ed, "cfgreg", NULL), +}; + +static struct clk_lookup u8500_v1_clks[] = { + /* Peripheral Cluster #1 */ + CLK(i2c4, "nmk-i2c.4", NULL), + CLK(spi3_v1, "spi3", NULL), + CLK(msp1_v1, "msp1", NULL), + + /* Peripheral Cluster #2 */ + CLK(gpio1_v1, "gpio.6", NULL), + CLK(gpio1_v1, "gpio.7", NULL), + CLK(ssitx_v1, "ssitx", NULL), + CLK(ssirx_v1, "ssirx", NULL), + CLK(spi0_v1, "spi0", NULL), + CLK(sdi3_v1, "sdi3", NULL), + CLK(sdi1_v1, "sdi1", NULL), + CLK(msp2_v1, "msp2", NULL), + CLK(sdi4_v1, "sdi4", NULL), + CLK(pwl_v1, "pwl", NULL), + CLK(spi1_v1, "spi1", NULL), + CLK(spi2_v1, "spi2", NULL), + CLK(i2c3_v1, "nmk-i2c.3", NULL), + + /* Peripheral Cluster #3 */ + CLK(ssp1_v1, "ssp1", NULL), + CLK(ssp0_v1, "ssp0", NULL), + + /* Peripheral Cluster #5 */ + CLK(usb_v1, "musb_hdrc.0", "usb"), + + /* Peripheral Cluster #6 */ + CLK(mtu1_v1, "mtu1", NULL), + CLK(mtu0_v1, "mtu0", NULL), + CLK(cfgreg_v1, "cfgreg", NULL), + CLK(hash1, "hash1", NULL), + CLK(unipro_v1, "unipro", NULL), + CLK(rng_v1, "rng", NULL), + + /* PRCMU level clock gating */ + + /* Bank 0 */ + CLK(uniproclk, "uniproclk", NULL), + CLK(dsialtclk, "dsialt", NULL), + + /* Bank 1 */ + CLK(rngclk, "rng", NULL), + CLK(uiccclk, "uicc", NULL), }; static int __init clk_init(void) { - /* register the clock lookups */ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + if (cpu_is_u8500ed()) { + clk_prcmu_ops.enable = clk_prcmu_ed_enable; + clk_prcmu_ops.disable = clk_prcmu_ed_disable; + } else if (cpu_is_u5500()) { + /* Clock tree for U5500 not implemented yet */ + clk_prcc_ops.enable = clk_prcc_ops.disable = NULL; + clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL; + } + + clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); + if (cpu_is_u8500ed()) + clkdev_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks)); + else + clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks)); + return 0; } arch_initcall(clk_init); diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h new file mode 100644 index 00000000000..e4f99b65026 --- /dev/null +++ b/arch/arm/mach-ux500/clock.h @@ -0,0 +1,125 @@ +/* + * Copyright (C) 2010 ST-Ericsson + * Copyright (C) 2009 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/** + * struct clkops - ux500 clock operations + * @enable: function to enable the clock + * @disable: function to disable the clock + * @get_rate: function to get the current clock rate + * + * This structure contains function pointers to functions that will be used to + * control the clock. All of these functions are optional. If get_rate is + * NULL, the rate in the struct clk will be used. + */ +struct clkops { + void (*enable) (struct clk *); + void (*disable) (struct clk *); + unsigned long (*get_rate) (struct clk *); +}; + +/** + * struct clk - ux500 clock structure + * @ops: pointer to clkops struct used to control this clock + * @name: name, for debugging + * @enabled: refcount. positive if enabled, zero if disabled + * @rate: fixed rate for clocks which don't implement + * ops->getrate + * @prcmu_cg_off: address offset of the combined enable/disable register + * (used on u8500v1) + * @prcmu_cg_bit: bit in the combined enable/disable register (used on + * u8500v1) + * @prcmu_cg_mgt: address of the enable/disable register (used on + * u8500ed) + * @cluster: peripheral cluster number + * @prcc_bus: bit for the bus clock in the peripheral's CLKRST + * @prcc_kernel: bit for the kernel clock in the peripheral's CLKRST. + * -1 if no kernel clock exists. + * @parent_cluster: pointer to parent's cluster clk struct + * @parent_periph: pointer to parent's peripheral clk struct + * + * Peripherals are organised into clusters, and each cluster has an associated + * bus clock. Some peripherals also have a parent peripheral clock. + * + * In order to enable a clock for a peripheral, we need to enable: + * (1) the parent cluster (bus) clock at the PRCMU level + * (2) the parent peripheral clock (if any) at the PRCMU level + * (3) the peripheral's bus & kernel clock at the PRCC level + * + * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each + * of the cluster and peripheral clocks, and hooking these as the parents of + * the individual peripheral clocks. + * + * (3) is handled by specifying the bits in the PRCC control registers required + * to enable these clocks and modifying them in the ->enable and + * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK). + * + * This structure describes both the PRCMU-level clocks and PRCC-level clocks. + * The prcmu_* fields are only used for the PRCMU clocks, and the cluster, + * prcc, and parent pointers are only used for the PRCC-level clocks. + */ +struct clk { + const struct clkops *ops; + const char *name; + unsigned int enabled; + + unsigned long rate; + struct list_head list; + + /* These three are only for PRCMU clks */ + + unsigned int prcmu_cg_off; + unsigned int prcmu_cg_bit; + unsigned int prcmu_cg_mgt; + + /* The rest are only for PRCC clks */ + + int cluster; + unsigned int prcc_bus; + unsigned int prcc_kernel; + + struct clk *parent_cluster; + struct clk *parent_periph; +}; + +#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg) \ +struct clk clk_##_name = { \ + .name = #_name, \ + .ops = &clk_prcmu_ops, \ + .prcmu_cg_off = _cg_off, \ + .prcmu_cg_bit = _cg_bit, \ + .prcmu_cg_mgt = PRCM_##_reg##_MGT \ + } + +#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate) \ +struct clk clk_##_name = { \ + .name = #_name, \ + .ops = &clk_prcmu_ops, \ + .prcmu_cg_off = _cg_off, \ + .prcmu_cg_bit = _cg_bit, \ + .rate = _rate, \ + .prcmu_cg_mgt = PRCM_##_reg##_MGT \ + } + +#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk) \ +struct clk clk_##_name = { \ + .name = #_name, \ + .ops = &clk_prcc_ops, \ + .cluster = _pclust, \ + .prcc_bus = _bus_en, \ + .prcc_kernel = _kernel_en, \ + .parent_cluster = &clk_per##_pclust##clk, \ + .parent_periph = _kernclk \ + } + +#define CLK(_clk, _devname, _conname) \ + { \ + .clk = &clk_##_clk, \ + .dev_id = _devname, \ + .con_id = _conname, \ + } diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c new file mode 100644 index 00000000000..6a3ac4539f1 --- /dev/null +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/platform_device.h> +#include <linux/amba/bus.h> +#include <linux/io.h> + +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/devices.h> +#include <mach/setup.h> + +static struct map_desc u5500_io_desc[] __initdata = { + __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K), + __IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K), + __IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K), + __IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K), + __IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K), +}; + +static struct platform_device *u5500_platform_devs[] __initdata = { + &u5500_gpio_devs[0], + &u5500_gpio_devs[1], + &u5500_gpio_devs[2], + &u5500_gpio_devs[3], + &u5500_gpio_devs[4], + &u5500_gpio_devs[5], + &u5500_gpio_devs[6], + &u5500_gpio_devs[7], +}; + +void __init u5500_map_io(void) +{ + ux500_map_io(); + + iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc)); +} + +void __init u5500_init_devices(void) +{ + ux500_init_devices(); + + platform_add_devices(u5500_platform_devs, + ARRAY_SIZE(u5500_platform_devs)); +} diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 397bc1f9ed9..d04299f3b6b 100644 --- a/arch/arm/mach-ux500/cpu-u8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -13,44 +13,55 @@ #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <linux/platform_device.h> +#include <linux/io.h> -#include <asm/hardware/gic.h> #include <asm/mach/map.h> #include <mach/hardware.h> +#include <mach/setup.h> +#include <mach/devices.h> -/* add any platform devices here - TODO */ static struct platform_device *platform_devs[] __initdata = { - /* yet to be added, add i2c0, gpio.. */ + &u8500_gpio_devs[0], + &u8500_gpio_devs[1], + &u8500_gpio_devs[2], + &u8500_gpio_devs[3], + &u8500_gpio_devs[4], + &u8500_gpio_devs[5], + &u8500_gpio_devs[6], + &u8500_gpio_devs[7], + &u8500_gpio_devs[8], }; -#define __IO_DEV_DESC(x, sz) { \ - .virtual = IO_ADDRESS(x), \ - .pfn = __phys_to_pfn(x), \ - .length = sz, \ - .type = MT_DEVICE, \ -} - /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_io_desc[] __initdata = { - __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K), - __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K), - __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), + __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), +}; + +static struct map_desc u8500ed_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K), +}; + +static struct map_desc u8500v1_io_desc[] __initdata = { __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), - __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K), - __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), - __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K), }; void __init u8500_map_io(void) { + ux500_map_io(); + iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); -} -void __init u8500_init_irq(void) -{ - gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29); - gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE)); + if (cpu_is_u8500ed()) + iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc)); + else + iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc)); } /* @@ -58,6 +69,8 @@ void __init u8500_init_irq(void) */ void __init u8500_init_devices(void) { + ux500_init_devices(); + /* Register the platform devices */ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c new file mode 100644 index 00000000000..d81ad023963 --- /dev/null +++ b/arch/arm/mach-ux500/cpu.c @@ -0,0 +1,99 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/platform_device.h> +#include <linux/amba/bus.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> +#include <asm/mach/map.h> +#include <asm/localtimer.h> + +#include <plat/mtu.h> +#include <mach/hardware.h> +#include <mach/setup.h> +#include <mach/devices.h> + +#include "clock.h" + +static struct map_desc ux500_io_desc[] __initdata = { + __IO_DEV_DESC(UX500_UART0_BASE, SZ_4K), + __IO_DEV_DESC(UX500_UART2_BASE, SZ_4K), + + __IO_DEV_DESC(UX500_GIC_CPU_BASE, SZ_4K), + __IO_DEV_DESC(UX500_GIC_DIST_BASE, SZ_4K), + __IO_DEV_DESC(UX500_L2CC_BASE, SZ_4K), + __IO_DEV_DESC(UX500_TWD_BASE, SZ_4K), + __IO_DEV_DESC(UX500_SCU_BASE, SZ_4K), + + __IO_DEV_DESC(UX500_CLKRST1_BASE, SZ_4K), + __IO_DEV_DESC(UX500_CLKRST2_BASE, SZ_4K), + __IO_DEV_DESC(UX500_CLKRST3_BASE, SZ_4K), + __IO_DEV_DESC(UX500_CLKRST5_BASE, SZ_4K), + __IO_DEV_DESC(UX500_CLKRST6_BASE, SZ_4K), + + __IO_DEV_DESC(UX500_MTU0_BASE, SZ_4K), + __IO_DEV_DESC(UX500_MTU1_BASE, SZ_4K), + + __IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K), +}; + +static struct amba_device *ux500_amba_devs[] __initdata = { + &ux500_pl031_device, +}; + +void __init ux500_map_io(void) +{ + iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc)); +} + +void __init ux500_init_devices(void) +{ + amba_add_devices(ux500_amba_devs, ARRAY_SIZE(ux500_amba_devs)); +} + +void __init ux500_init_irq(void) +{ + gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29); + gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE)); +} + +#ifdef CONFIG_CACHE_L2X0 +static int ux500_l2x0_init(void) +{ + void __iomem *l2x0_base; + + l2x0_base = __io_address(UX500_L2CC_BASE); + + /* 64KB way size, 8 way associativity, force WA */ + l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); + + return 0; +} +early_initcall(ux500_l2x0_init); +#endif + +static void __init ux500_timer_init(void) +{ +#ifdef CONFIG_LOCAL_TIMERS + /* Setup the local timer base */ + twd_base = __io_address(UX500_TWD_BASE); +#endif + /* Setup the MTU base */ + if (cpu_is_u8500ed()) + mtu_base = __io_address(U8500_MTU0_BASE_ED); + else + mtu_base = __io_address(UX500_MTU0_BASE); + + nmdk_timer_init(); +} + +struct sys_timer ux500_timer = { + .init = ux500_timer_init, +}; diff --git a/arch/arm/mach-ux500/devices-db5500.c b/arch/arm/mach-ux500/devices-db5500.c new file mode 100644 index 00000000000..33e5b56bebb --- /dev/null +++ b/arch/arm/mach-ux500/devices-db5500.c @@ -0,0 +1,46 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <mach/devices.h> + +static struct nmk_gpio_platform_data u5500_gpio_data[] = { + GPIO_DATA("GPIO-0-31", 0), + GPIO_DATA("GPIO-32-63", 32), /* 36..63 not routed to pin */ + GPIO_DATA("GPIO-64-95", 64), /* 83..95 not routed to pin */ + GPIO_DATA("GPIO-96-127", 96), /* 102..127 not routed to pin */ + GPIO_DATA("GPIO-128-159", 128), /* 149..159 not routed to pin */ + GPIO_DATA("GPIO-160-191", 160), + GPIO_DATA("GPIO-192-223", 192), + GPIO_DATA("GPIO-224-255", 224), /* 228..255 not routed to pin */ +}; + +static struct resource u5500_gpio_resources[] = { + GPIO_RESOURCE(0), + GPIO_RESOURCE(1), + GPIO_RESOURCE(2), + GPIO_RESOURCE(3), + GPIO_RESOURCE(4), + GPIO_RESOURCE(5), + GPIO_RESOURCE(6), + GPIO_RESOURCE(7), +}; + +struct platform_device u5500_gpio_devs[] = { + GPIO_DEVICE(0), + GPIO_DEVICE(1), + GPIO_DEVICE(2), + GPIO_DEVICE(3), + GPIO_DEVICE(4), + GPIO_DEVICE(5), + GPIO_DEVICE(6), + GPIO_DEVICE(7), +}; diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c new file mode 100644 index 00000000000..20334236afc --- /dev/null +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/amba/bus.h> + +#include <mach/hardware.h> +#include <mach/setup.h> + +static struct nmk_gpio_platform_data u8500_gpio_data[] = { + GPIO_DATA("GPIO-0-31", 0), + GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */ + GPIO_DATA("GPIO-64-95", 64), + GPIO_DATA("GPIO-96-127", 96), /* 98..127 not routed to pin */ + GPIO_DATA("GPIO-128-159", 128), + GPIO_DATA("GPIO-160-191", 160), /* 172..191 not routed to pin */ + GPIO_DATA("GPIO-192-223", 192), + GPIO_DATA("GPIO-224-255", 224), /* 231..255 not routed to pin */ + GPIO_DATA("GPIO-256-288", 256), /* 268..288 not routed to pin */ +}; + +static struct resource u8500_gpio_resources[] = { + GPIO_RESOURCE(0), + GPIO_RESOURCE(1), + GPIO_RESOURCE(2), + GPIO_RESOURCE(3), + GPIO_RESOURCE(4), + GPIO_RESOURCE(5), + GPIO_RESOURCE(6), + GPIO_RESOURCE(7), + GPIO_RESOURCE(8), +}; + +struct platform_device u8500_gpio_devs[] = { + GPIO_DEVICE(0), + GPIO_DEVICE(1), + GPIO_DEVICE(2), + GPIO_DEVICE(3), + GPIO_DEVICE(4), + GPIO_DEVICE(5), + GPIO_DEVICE(6), + GPIO_DEVICE(7), + GPIO_DEVICE(8), +}; + +struct amba_device u8500_ssp0_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "ssp0", + }, + .res = { + .start = U8500_SSP0_BASE, + .end = U8500_SSP0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_SSP0, NO_IRQ }, + /* ST-Ericsson modified id */ + .periphid = SSP_PER_ID, +}; + +static struct resource u8500_i2c0_resources[] = { + [0] = { + .start = U8500_I2C0_BASE, + .end = U8500_I2C0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_I2C0, + .end = IRQ_I2C0, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device u8500_i2c0_device = { + .name = "nmk-i2c", + .id = 0, + .resource = u8500_i2c0_resources, + .num_resources = ARRAY_SIZE(u8500_i2c0_resources), +}; + +static struct resource u8500_i2c4_resources[] = { + [0] = { + .start = U8500_I2C4_BASE, + .end = U8500_I2C4_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_I2C4, + .end = IRQ_I2C4, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device u8500_i2c4_device = { + .name = "nmk-i2c", + .id = 4, + .resource = u8500_i2c4_resources, + .num_resources = ARRAY_SIZE(u8500_i2c4_resources), +}; diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c new file mode 100644 index 00000000000..8a268893cb7 --- /dev/null +++ b/arch/arm/mach-ux500/devices.c @@ -0,0 +1,88 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/amba/bus.h> + +#include <mach/hardware.h> +#include <mach/setup.h> + +#define __MEM_4K_RESOURCE(x) \ + .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} + +struct amba_device ux500_pl031_device = { + .dev = { + .init_name = "pl031", + }, + .res = { + .start = UX500_RTC_BASE, + .end = UX500_RTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_RTC_RTT, NO_IRQ}, +}; + +struct amba_device ux500_uart0_device = { + .dev = { .init_name = "uart0" }, + __MEM_4K_RESOURCE(UX500_UART0_BASE), + .irq = {IRQ_UART0, NO_IRQ}, +}; + +struct amba_device ux500_uart1_device = { + .dev = { .init_name = "uart1" }, + __MEM_4K_RESOURCE(UX500_UART1_BASE), + .irq = {IRQ_UART1, NO_IRQ}, +}; + +struct amba_device ux500_uart2_device = { + .dev = { .init_name = "uart2" }, + __MEM_4K_RESOURCE(UX500_UART2_BASE), + .irq = {IRQ_UART2, NO_IRQ}, +}; + +#define UX500_I2C_RESOURCES(id, size) \ +static struct resource ux500_i2c##id##_resources[] = { \ + [0] = { \ + .start = UX500_I2C##id##_BASE, \ + .end = UX500_I2C##id##_BASE + size - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + [1] = { \ + .start = IRQ_I2C##id, \ + .end = IRQ_I2C##id, \ + .flags = IORESOURCE_IRQ \ + } \ +} + +UX500_I2C_RESOURCES(1, SZ_4K); +UX500_I2C_RESOURCES(2, SZ_4K); +UX500_I2C_RESOURCES(3, SZ_4K); + +#define UX500_I2C_PDEVICE(cid) \ +struct platform_device ux500_i2c##cid##_device = { \ + .name = "nmk-i2c", \ + .id = cid, \ + .num_resources = 2, \ + .resource = ux500_i2c##cid##_resources, \ +} + +UX500_I2C_PDEVICE(1); +UX500_I2C_PDEVICE(2); +UX500_I2C_PDEVICE(3); + +void __init amba_add_devices(struct amba_device *devs[], int num) +{ + int i; + + for (i = 0; i < num; i++) { + struct amba_device *d = devs[i]; + amba_device_register(d, &iomem_resource); + } +} diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h new file mode 100644 index 00000000000..545c80fc802 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h @@ -0,0 +1,103 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_DB5500_REGS_H +#define __MACH_DB5500_REGS_H + +#define U5500_PER1_BASE 0xA0020000 +#define U5500_PER2_BASE 0xA0010000 +#define U5500_PER3_BASE 0x80140000 +#define U5500_PER4_BASE 0x80150000 +#define U5500_PER5_BASE 0x80100000 +#define U5500_PER6_BASE 0x80120000 + +#define U5500_GIC_DIST_BASE 0xA0411000 +#define U5500_GIC_CPU_BASE 0xA0410100 +#define U5500_DMA_BASE 0x90030000 +#define U5500_MCDE_BASE 0xA0400000 +#define U5500_MODEM_BASE 0xB0000000 +#define U5500_L2CC_BASE 0xA0412000 +#define U5500_SCU_BASE 0xA0410000 +#define U5500_DSI1_BASE 0xA0401000 +#define U5500_DSI2_BASE 0xA0402000 +#define U5500_SIA_BASE 0xA0100000 +#define U5500_SVA_BASE 0x80200000 +#define U5500_HSEM_BASE 0xA0000000 +#define U5500_NAND0_BASE 0x60000000 +#define U5500_NAND1_BASE 0x70000000 +#define U5500_TWD_BASE 0xa0410600 +#define U5500_B2R2_BASE 0xa0200000 + +#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000) +#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000) +#define U5500_SDI2_BASE (U5500_PER1_BASE + 0x2000) +#define U5500_UART0_BASE (U5500_PER1_BASE + 0x3000) +#define U5500_I2C1_BASE (U5500_PER1_BASE + 0x4000) +#define U5500_MSP0_BASE (U5500_PER1_BASE + 0x5000) +#define U5500_GPIO0_BASE (U5500_PER1_BASE + 0xE000) +#define U5500_CLKRST1_BASE (U5500_PER1_BASE + 0xF000) + +#define U5500_USBOTG_BASE (U5500_PER2_BASE + 0x0000) +#define U5500_GPIO1_BASE (U5500_PER2_BASE + 0xE000) +#define U5500_CLKRST2_BASE (U5500_PER2_BASE + 0xF000) + +#define U5500_KEYPAD_BASE (U5500_PER3_BASE + 0x0000) +#define U5500_PWM_BASE (U5500_PER3_BASE + 0x1000) +#define U5500_GPIO3_BASE (U5500_PER3_BASE + 0xE000) +#define U5500_CLKRST3_BASE (U5500_PER3_BASE + 0xF000) + +#define U5500_BACKUPRAM0_BASE (U5500_PER4_BASE + 0x0000) +#define U5500_BACKUPRAM1_BASE (U5500_PER4_BASE + 0x1000) +#define U5500_RTT0_BASE (U5500_PER4_BASE + 0x2000) +#define U5500_RTT1_BASE (U5500_PER4_BASE + 0x3000) +#define U5500_RTC_BASE (U5500_PER4_BASE + 0x4000) +#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000) +#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000) +#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000) +#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000) +#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000) +#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000) + +#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000) +#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000) +#define U5500_SPI2_BASE (U5500_PER5_BASE + 0x2000) +#define U5500_SPI3_BASE (U5500_PER5_BASE + 0x3000) +#define U5500_UART1_BASE (U5500_PER5_BASE + 0x4000) +#define U5500_UART2_BASE (U5500_PER5_BASE + 0x5000) +#define U5500_UART3_BASE (U5500_PER5_BASE + 0x6000) +#define U5500_SDI1_BASE (U5500_PER5_BASE + 0x7000) +#define U5500_SDI3_BASE (U5500_PER5_BASE + 0x8000) +#define U5500_SDI4_BASE (U5500_PER5_BASE + 0x9000) +#define U5500_I2C2_BASE (U5500_PER5_BASE + 0xA000) +#define U5500_I2C3_BASE (U5500_PER5_BASE + 0xB000) +#define U5500_MSP2_BASE (U5500_PER5_BASE + 0xC000) +#define U5500_IRDA_BASE (U5500_PER5_BASE + 0xD000) +#define U5500_IRRC_BASE (U5500_PER5_BASE + 0x10000) +#define U5500_GPIO4_BASE (U5500_PER5_BASE + 0x1E000) +#define U5500_CLKRST5_BASE (U5500_PER5_BASE + 0x1F000) + +#define U5500_RNG_BASE (U5500_PER6_BASE + 0x0000) +#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000) +#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000) +#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000) +#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5000) +#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000) +#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000) +#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000) +#define U5500_CRYP0_BASE (U5500_PER6_BASE + 0xA000) +#define U5500_CRYP1_BASE (U5500_PER6_BASE + 0xB000) +#define U5500_CLKRST6_BASE (U5500_PER6_BASE + 0xF000) + +#define U5500_GPIOBANK0_BASE U5500_GPIO0_BASE +#define U5500_GPIOBANK1_BASE (U5500_GPIO0_BASE + 0x80) +#define U5500_GPIOBANK2_BASE U5500_GPIO1_BASE +#define U5500_GPIOBANK3_BASE U5500_GPIO2_BASE +#define U5500_GPIOBANK4_BASE U5500_GPIO3_BASE +#define U5500_GPIOBANK5_BASE U5500_GPIO4_BASE +#define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80) +#define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100) + +#endif diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h new file mode 100644 index 00000000000..9169e1e382a --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -0,0 +1,135 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_DB8500_REGS_H +#define __MACH_DB8500_REGS_H + +#define U8500_PER3_BASE 0x80000000 +#define U8500_STM_BASE 0x80100000 +#define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000) +#define U8500_PER2_BASE 0x80110000 +#define U8500_PER1_BASE 0x80120000 +#define U8500_B2R2_BASE 0x80130000 +#define U8500_HSEM_BASE 0x80140000 +#define U8500_PER4_BASE 0x80150000 +#define U8500_ICN_BASE 0x81000000 + +#define U8500_BOOT_ROM_BASE 0x90000000 +/* ASIC ID is at 0xff4 offset within this region */ +#define U8500_ASIC_ID_BASE 0x9001F000 + +#define U8500_PER6_BASE 0xa03c0000 +#define U8500_PER5_BASE 0xa03e0000 +#define U8500_PER7_BASE_ED 0xa03d0000 + +#define U8500_SVA_BASE 0xa0100000 +#define U8500_SIA_BASE 0xa0200000 + +#define U8500_SGA_BASE 0xa0300000 +#define U8500_MCDE_BASE 0xa0350000 +#define U8500_DMA_BASE_ED 0xa0362000 +#define U8500_DMA_BASE 0x801C0000 /* v1 */ + +#define U8500_SBAG_BASE 0xa0390000 + +#define U8500_SCU_BASE 0xa0410000 +#define U8500_GIC_CPU_BASE 0xa0410100 +#define U8500_TWD_BASE 0xa0410600 +#define U8500_GIC_DIST_BASE 0xa0411000 +#define U8500_L2CC_BASE 0xa0412000 + +#define U8500_MODEM_I2C 0xb7e02000 + +#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000) +#define U8500_GPIO1_BASE (U8500_PER3_BASE + 0xE000) +#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000) +#define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000) + +/* per7 base addressess */ +#define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000) +#define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000) +#define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000) +#define U8500_TZPC0_BASE_ED (U8500_PER7_BASE_ED + 0xc000) +#define U8500_CLKRST7_BASE_ED (U8500_PER7_BASE_ED + 0xf000) + +#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) +#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) + +/* per6 base addressess */ +#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) +#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) +#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) +#define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */ +#define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */ +#define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */ +#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) +#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) +#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) + +/* per5 base addressess */ +#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) +#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) + +/* per4 base addressess */ +#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000) +#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000) +#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000) +#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x03000) +#define U8500_RTC_BASE (U8500_PER4_BASE + 0x04000) +#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) +#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) +#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) +#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000) + +/* per3 base addresses */ +#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) +#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) +#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000) +#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000) +#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000) +#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000) +#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) +#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) +#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) + +/* per2 base addressess */ +#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) +#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) +#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) +#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000) +#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000) +#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000) +#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000) +#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000) +#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000) +#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000) +#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000) +#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) + +/* per1 base addresses */ +#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) +#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) +#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) +#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) +#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) +#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) +#define U8500_I2C4_BASE (U8500_PER1_BASE + 0xa000) +#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xb000) +#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) + +#define U8500_SHRM_GOP_INTERRUPT_BASE 0xB7C00040 + +#define U8500_GPIOBANK0_BASE U8500_GPIO0_BASE +#define U8500_GPIOBANK1_BASE (U8500_GPIO0_BASE + 0x80) +#define U8500_GPIOBANK2_BASE U8500_GPIO1_BASE +#define U8500_GPIOBANK3_BASE (U8500_GPIO1_BASE + 0x80) +#define U8500_GPIOBANK4_BASE (U8500_GPIO1_BASE + 0x100) +#define U8500_GPIOBANK5_BASE (U8500_GPIO1_BASE + 0x180) +#define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE +#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80) +#define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE + +#endif diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index 09cbfda8aee..c5203b7ea55 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -10,11 +10,19 @@ */ #include <mach/hardware.h> +#if CONFIG_UX500_DEBUG_UART > 2 +#error Invalid Ux500 debug UART +#endif + +#define __UX500_UART(n) UX500_UART##n##_BASE +#define UX500_UART(n) __UX500_UART(n) +#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) + .macro addruart, rx, tmp mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - ldreq \rx, =U8500_UART2_BASE @ no, physical address - ldrne \rx, =IO_ADDRESS(U8500_UART2_BASE) @ yes, virtual address + ldreq \rx, =UART_BASE @ no, physical address + ldrne \rx, =IO_ADDRESS(UART_BASE) @ yes, virtual address .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h new file mode 100644 index 00000000000..0422af00a56 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __ASM_ARCH_DEVICES_H__ +#define __ASM_ARCH_DEVICES_H__ + +struct platform_device; +struct amba_device; + +extern struct platform_device u5500_gpio_devs[]; +extern struct platform_device u8500_gpio_devs[]; + +extern struct amba_device ux500_pl031_device; +extern struct amba_device u8500_ssp0_device; +extern struct amba_device ux500_uart0_device; +extern struct amba_device ux500_uart1_device; +extern struct amba_device ux500_uart2_device; + +extern struct platform_device ux500_i2c1_device; +extern struct platform_device ux500_i2c2_device; +extern struct platform_device ux500_i2c3_device; + +extern struct platform_device u8500_i2c0_device; +extern struct platform_device u8500_i2c4_device; + +#endif diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S index eece3301fef..60ea88db828 100644 --- a/arch/arm/mach-ux500/include/mach/entry-macro.S +++ b/arch/arm/mach-ux500/include/mach/entry-macro.S @@ -17,7 +17,7 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(U8500_GIC_CPU_BASE) + ldr \base, =IO_ADDRESS(UX500_GIC_CPU_BASE) .endm .macro arch_ret_to_user, tmp1, tmp2 diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h new file mode 100644 index 00000000000..d548a622e7d --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/gpio.h @@ -0,0 +1,50 @@ +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H + +/* + * 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough + * room for a couple of GPIO expanders. + */ +#define ARCH_NR_GPIOS 350 + +#include <plat/gpio.h> + +#define __GPIO_RESOURCE(soc, block) \ + { \ + .start = soc##_GPIOBANK##block##_BASE, \ + .end = soc##_GPIOBANK##block##_BASE + 127, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = IRQ_GPIO##block, \ + .end = IRQ_GPIO##block, \ + .flags = IORESOURCE_IRQ, \ + } + +#define __GPIO_DEVICE(soc, block) \ + { \ + .name = "gpio", \ + .id = block, \ + .num_resources = 2, \ + .resource = &soc##_gpio_resources[block * 2], \ + .dev = { \ + .platform_data = &soc##_gpio_data[block], \ + }, \ + } + +#define GPIO_DATA(_name, first) \ + { \ + .name = _name, \ + .first_gpio = first, \ + .first_irq = NOMADIK_GPIO_TO_IRQ(first), \ + } + +#ifdef CONFIG_UX500_SOC_DB8500 +#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U8500, block) +#define GPIO_DEVICE(block) __GPIO_DEVICE(u8500, block) +#elif defined(CONFIG_UX500_SOC_DB5500) +#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U5500, block) +#define GPIO_DEVICE(block) __GPIO_DEVICE(u5500, block) +#endif + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 04ea836969b..8656379a830 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -23,109 +23,106 @@ /* typesafe io address */ #define __io_address(n) __io(IO_ADDRESS(n)) +/* used by some plat-nomadik code */ +#define io_p2v(n) __io_address(n) -/* - * Base address definitions for U8500 Onchip IPs. All the - * peripherals are contained in a single 1 Mbyte region, with - * AHB peripherals at the bottom and APB peripherals at the - * top of the region. PER stands for PERIPHERAL region which - * itself divided into sub regions. - */ -#define U8500_PER3_BASE 0x80000000 -#define U8500_PER2_BASE 0x80110000 -#define U8500_PER1_BASE 0x80120000 -#define U8500_PER4_BASE 0x80150000 - -#define U8500_PER6_BASE 0xa03c0000 -#define U8500_PER5_BASE 0xa03e0000 -#define U8500_PER7_BASE 0xa03d0000 - -#define U8500_SVA_BASE 0xa0100000 -#define U8500_SIA_BASE 0xa0200000 - -#define U8500_SGA_BASE 0xa0300000 -#define U8500_MCDE_BASE 0xa0350000 -#define U8500_DMA_BASE 0xa0362000 - -#define U8500_SCU_BASE 0xa0410000 -#define U8500_GIC_CPU_BASE 0xa0410100 -#define U8500_TWD_BASE 0xa0410600 -#define U8500_GIC_DIST_BASE 0xa0411000 -#define U8500_L2CC_BASE 0xa0412000 - -#define U8500_TWD_SIZE 0x100 - -/* per7 base addressess */ -#define U8500_CR_BASE (U8500_PER7_BASE + 0x8000) -#define U8500_MTU0_BASE (U8500_PER7_BASE + 0xa000) -#define U8500_MTU1_BASE (U8500_PER7_BASE + 0xb000) -#define U8500_TZPC0_BASE (U8500_PER7_BASE + 0xc000) -#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000) - -/* per6 base addressess */ -#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) -#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) -#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) -#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) -#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) -#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) - -/* per5 base addressess */ -#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) -#define U8500_GPIO5_BASE (U8500_PER5_BASE + 0x1e000) -#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) - -/* per4 base addressess */ -#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x0000) -#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x1000) -#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x2000) -#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x3000) -#define U8500_RTC_BASE (U8500_PER4_BASE + 0x4000) -#define U8500_SCR_BASE (U8500_PER4_BASE + 0x5000) -#define U8500_DMC_BASE (U8500_PER4_BASE + 0x6000) -#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x7000) - -/* per3 base addressess */ -#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) -#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) -#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000) -#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000) -#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000) -#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000) -#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) -#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) -#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xe000) -#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) - -/* per2 base addressess */ -#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) -#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) -#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) -#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000) -#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000) -#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000) -#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000) -#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000) -#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000) -#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000) -#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000) -#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xe000) -#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) - -/* per1 base addresses */ -#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) -#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) -#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) -#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) -#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) -#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) -#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) -#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) -#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xa000) -#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000) -#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) +#include <mach/db8500-regs.h> +#include <mach/db5500-regs.h> + +#ifdef CONFIG_UX500_SOC_DB8500 +#define UX500(periph) U8500_##periph##_BASE +#elif defined(CONFIG_UX500_SOC_DB5500) +#define UX500(periph) U5500_##periph##_BASE +#endif + +#define UX500_BACKUPRAM0_BASE UX500(BACKUPRAM0) +#define UX500_BACKUPRAM1_BASE UX500(BACKUPRAM1) +#define UX500_B2R2_BASE UX500(B2R2) + +#define UX500_CLKRST1_BASE UX500(CLKRST1) +#define UX500_CLKRST2_BASE UX500(CLKRST2) +#define UX500_CLKRST3_BASE UX500(CLKRST3) +#define UX500_CLKRST5_BASE UX500(CLKRST5) +#define UX500_CLKRST6_BASE UX500(CLKRST6) + +#define UX500_DMA_BASE UX500(DMA) +#define UX500_FSMC_BASE UX500(FSMC) + +#define UX500_GIC_CPU_BASE UX500(GIC_CPU) +#define UX500_GIC_DIST_BASE UX500(GIC_DIST) + +#define UX500_I2C1_BASE UX500(I2C1) +#define UX500_I2C2_BASE UX500(I2C2) +#define UX500_I2C3_BASE UX500(I2C3) + +#define UX500_L2CC_BASE UX500(L2CC) +#define UX500_MCDE_BASE UX500(MCDE) +#define UX500_MTU0_BASE UX500(MTU0) +#define UX500_MTU1_BASE UX500(MTU1) +#define UX500_PRCMU_BASE UX500(PRCMU) + +#define UX500_RNG_BASE UX500(RNG) +#define UX500_RTC_BASE UX500(RTC) + +#define UX500_SCU_BASE UX500(SCU) + +#define UX500_SDI0_BASE UX500(SDI0) +#define UX500_SDI1_BASE UX500(SDI1) +#define UX500_SDI2_BASE UX500(SDI2) +#define UX500_SDI3_BASE UX500(SDI3) +#define UX500_SDI4_BASE UX500(SDI4) + +#define UX500_SPI0_BASE UX500(SPI0) +#define UX500_SPI1_BASE UX500(SPI1) +#define UX500_SPI2_BASE UX500(SPI2) +#define UX500_SPI3_BASE UX500(SPI3) + +#define UX500_SIA_BASE UX500(SIA) +#define UX500_SVA_BASE UX500(SVA) + +#define UX500_TWD_BASE UX500(TWD) + +#define UX500_UART0_BASE UX500(UART0) +#define UX500_UART1_BASE UX500(UART1) +#define UX500_UART2_BASE UX500(UART2) + +#define UX500_USBOTG_BASE UX500(USBOTG) /* ST-Ericsson modified pl022 id */ #define SSP_PER_ID 0x01080022 +#ifndef __ASSEMBLY__ + +#include <asm/cputype.h> + +static inline bool cpu_is_u8500(void) +{ +#ifdef CONFIG_UX500_SOC_DB8500 + return 1; +#else + return 0; +#endif +} + +static inline bool cpu_is_u8500ed(void) +{ + return cpu_is_u8500() && (read_cpuid_id() & 15) == 0; +} + +static inline bool cpu_is_u8500v1(void) +{ + return cpu_is_u8500() && (read_cpuid_id() & 15) == 1; +} + +static inline bool cpu_is_u5500(void) +{ +#ifdef CONFIG_UX500_SOC_DB5500 + return 1; +#else + return 0; +#endif +} + +#endif + #endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 394b5dd2200..7970684b1d0 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -42,6 +42,7 @@ #define IRQ_AB4500 (IRQ_SHPI_START + 40) #define IRQ_DISP (IRQ_SHPI_START + 48) #define IRQ_SiPI3 (IRQ_SHPI_START + 49) +#define IRQ_I2C4 (IRQ_SHPI_START + 51) #define IRQ_SSP1 (IRQ_SHPI_START + 52) #define IRQ_I2C2 (IRQ_SHPI_START + 55) #define IRQ_SDMMC0 (IRQ_SHPI_START + 60) @@ -66,6 +67,12 @@ /* There are 128 shared peripheral interrupts assigned to * INTID[160:32]. The first 32 interrupts are reserved. */ -#define NR_IRQS 161 +#define U8500_SOC_NR_IRQS 161 + +/* After chip-specific IRQ numbers we have the GPIO ones */ +#define NOMADIK_NR_GPIO 288 +#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + U8500_SOC_NR_IRQS) +#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - U8500_SOC_NR_IRQS) +#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) #endif /*ASM_ARCH_IRQS_H*/ diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index cf0ce1687f2..e978dbd9e21 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -14,10 +14,28 @@ #include <asm/mach/time.h> #include <linux/init.h> -extern void u8500_map_io(void); -extern void u8500_init_devices(void); -extern void u8500_init_irq(void); +extern void __init ux500_map_io(void); +extern void __init u5500_map_io(void); +extern void __init u8500_map_io(void); + +extern void __init ux500_init_devices(void); +extern void __init u5500_init_devices(void); +extern void __init u8500_init_devices(void); + +extern void __init ux500_init_irq(void); /* We re-use nomadik_timer for this platform */ extern void nmdk_timer_init(void); +extern void __init amba_add_devices(struct amba_device *devs[], int num); + +struct sys_timer; +extern struct sys_timer ux500_timer; + +#define __IO_DEV_DESC(x, sz) { \ + .virtual = IO_ADDRESS(x), \ + .pfn = __phys_to_pfn(x), \ + .length = sz, \ + .type = MT_DEVICE, \ +} + #endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 8dfe7ca245d..438ef16aec9 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -30,7 +30,7 @@ volatile int __cpuinitdata pen_release = -1; static unsigned int __init get_core_count(void) { - return scu_get_core_count(__io_address(U8500_SCU_BASE)); + return scu_get_core_count(__io_address(UX500_SCU_BASE)); } static DEFINE_SPINLOCK(boot_lock); @@ -44,7 +44,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE)); + gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE)); /* * let the primary processor know we're out of the @@ -75,7 +75,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * that it has been released by resetting pen_release. */ pen_release = cpu; - flush_cache_all(); + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { @@ -105,12 +106,12 @@ static void __init wakeup_secondary(void) */ #define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4 __raw_writel(virt_to_phys(u8500_secondary_startup), - (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) + + __io_address(UX500_BACKUPRAM0_BASE) + U8500_CPU1_JUMPADDR_OFFSET); #define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0 __raw_writel(0xA1FEED01, - (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) + + __io_address(UX500_BACKUPRAM0_BASE) + U8500_CPU1_WAKEMAGIC_OFFSET); /* make sure write buffer is drained */ @@ -171,7 +172,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) * boot CPU, but only if we have more than one CPU. */ percpu_timer_setup(); - scu_enable(__io_address(U8500_SCU_BASE)); + scu_enable(__io_address(UX500_SCU_BASE)); wakeup_secondary(); } } |