summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ux500')
-rw-r--r--arch/arm/mach-ux500/Kconfig41
-rw-r--r--arch/arm/mach-ux500/Makefile6
-rw-r--r--arch/arm/mach-ux500/board-mop500.c134
-rw-r--r--arch/arm/mach-ux500/board-u5500.c41
-rw-r--r--arch/arm/mach-ux500/clock.c501
-rw-r--r--arch/arm/mach-ux500/clock.h125
-rw-r--r--arch/arm/mach-ux500/cpu-db5500.c50
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c (renamed from arch/arm/mach-ux500/cpu-u8500.c)55
-rw-r--r--arch/arm/mach-ux500/cpu.c99
-rw-r--r--arch/arm/mach-ux500/devices-db5500.c46
-rw-r--r--arch/arm/mach-ux500/devices-db8500.c107
-rw-r--r--arch/arm/mach-ux500/devices.c88
-rw-r--r--arch/arm/mach-ux500/include/mach/db5500-regs.h103
-rw-r--r--arch/arm/mach-ux500/include/mach/db8500-regs.h135
-rw-r--r--arch/arm/mach-ux500/include/mach/debug-macro.S12
-rw-r--r--arch/arm/mach-ux500/include/mach/devices.h29
-rw-r--r--arch/arm/mach-ux500/include/mach/entry-macro.S2
-rw-r--r--arch/arm/mach-ux500/include/mach/gpio.h50
-rw-r--r--arch/arm/mach-ux500/include/mach/hardware.h197
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs.h9
-rw-r--r--arch/arm/mach-ux500/include/mach/setup.h24
-rw-r--r--arch/arm/mach-ux500/platsmp.c13
22 files changed, 1575 insertions, 292 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 03625d74485..6625e5bbf4d 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,15 +1,42 @@
-menu "ST-Ericsson platform type"
- depends on ARCH_U8500
+if ARCH_U8500
-comment "ST-Ericsson Multicore Mobile Platforms"
-
-config MACH_U8500_MOP
- bool "U8500 Early Development platform"
+config UX500_SOC_COMMON
+ bool
default y
select ARM_GIC
select HAS_MTU
+ select NOMADIK_GPIO
+
+config UX500_SOC_DB8500
+ bool
+
+config UX500_SOC_DB5500
+ bool
+
+choice
+ prompt "Ux500 target platform"
+ default MACH_U8500_MOP
+
+config MACH_U8500_MOP
+ bool "U8500 Development platform"
+ select UX500_SOC_DB8500
help
Include support for mop500 development platform
based on U8500 architecture. The platform is based
on early drop silicon version of 8500.
-endmenu
+
+config MACH_U5500
+ bool "U5500 Development platform"
+ select UX500_SOC_DB5500
+ help
+ Include support for the U5500 development platform.
+endchoice
+
+config UX500_DEBUG_UART
+ int "Ux500 UART to use for low-level debug"
+ default 2
+ help
+ Choose the UART on which kernel low-level debug messages should be
+ output.
+
+endif
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 95e6e24c004..c7bc4199e3a 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,7 +2,9 @@
# Makefile for the linux kernel, U8500 machine.
#
-obj-y := clock.o
-obj-$(CONFIG_ARCH_U8500) += cpu-u8500.o
+obj-y := clock.o cpu.o devices.o
+obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o devices-db5500.o
+obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o
+obj-$(CONFIG_MACH_U5500) += board-u5500.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 803aec1d672..072196c5726 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -17,37 +17,14 @@
#include <linux/amba/pl022.h>
#include <linux/spi/spi.h>
-#include <asm/localtimer.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <plat/mtu.h>
#include <plat/i2c.h>
#include <mach/hardware.h>
#include <mach/setup.h>
-
-#define __MEM_4K_RESOURCE(x) \
- .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
-
-/* These are active devices on this board */
-static struct amba_device uart0_device = {
- .dev = { .init_name = "uart0" },
- __MEM_4K_RESOURCE(U8500_UART0_BASE),
- .irq = {IRQ_UART0, NO_IRQ},
-};
-
-static struct amba_device uart1_device = {
- .dev = { .init_name = "uart1" },
- __MEM_4K_RESOURCE(U8500_UART1_BASE),
- .irq = {IRQ_UART1, NO_IRQ},
-};
-
-static struct amba_device uart2_device = {
- .dev = { .init_name = "uart2" },
- __MEM_4K_RESOURCE(U8500_UART2_BASE),
- .irq = {IRQ_UART2, NO_IRQ},
-};
+#include <mach/devices.h>
static void ab4500_spi_cs_control(u32 command)
{
@@ -93,55 +70,8 @@ static struct pl022_ssp_controller ssp0_platform_data = {
.num_chipselect = 5,
};
-static struct amba_device pl022_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "pl022",
- .platform_data = &ssp0_platform_data,
- },
- .res = {
- .start = U8500_SSP0_BASE,
- .end = U8500_SSP0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_SSP0, NO_IRQ },
- /* ST-Ericsson modified id */
- .periphid = SSP_PER_ID,
-};
-
-static struct amba_device pl031_device = {
- .dev = {
- .init_name = "pl031",
- },
- .res = {
- .start = U8500_RTC_BASE,
- .end = U8500_RTC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_RTC_RTT, NO_IRQ},
-};
-
-#define U8500_I2C_RESOURCES(id, size) \
-static struct resource u8500_i2c_resources_##id[] = { \
- [0] = { \
- .start = U8500_I2C##id##_BASE, \
- .end = U8500_I2C##id##_BASE + size - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- [1] = { \
- .start = IRQ_I2C##id, \
- .end = IRQ_I2C##id, \
- .flags = IORESOURCE_IRQ \
- } \
-}
-
-U8500_I2C_RESOURCES(0, SZ_4K);
-U8500_I2C_RESOURCES(1, SZ_4K);
-U8500_I2C_RESOURCES(2, SZ_4K);
-U8500_I2C_RESOURCES(3, SZ_4K);
-
#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
-static struct nmk_i2c_controller u8500_i2c_##id = { \
+static struct nmk_i2c_controller u8500_i2c##id##_data = { \
/* \
* slave data setup time, which is \
* 250 ns,100ns,10ns which is 14,6,2 \
@@ -169,58 +99,32 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-#define U8500_I2C_PDEVICE(cid) \
-static struct platform_device i2c_controller##cid = { \
- .name = "nmk-i2c", \
- .id = cid, \
- .num_resources = 2, \
- .resource = u8500_i2c_resources_##cid, \
- .dev = { \
- .platform_data = &u8500_i2c_##cid \
- } \
-}
-
-U8500_I2C_PDEVICE(0);
-U8500_I2C_PDEVICE(1);
-U8500_I2C_PDEVICE(2);
-U8500_I2C_PDEVICE(3);
-
static struct amba_device *amba_devs[] __initdata = {
- &uart0_device,
- &uart1_device,
- &uart2_device,
- &pl022_device,
- &pl031_device,
+ &ux500_uart0_device,
+ &ux500_uart1_device,
+ &ux500_uart2_device,
+ &u8500_ssp0_device,
};
/* add any platform devices here - TODO */
static struct platform_device *platform_devs[] __initdata = {
- &i2c_controller0,
- &i2c_controller1,
- &i2c_controller2,
- &i2c_controller3,
-};
-
-static void __init u8500_timer_init(void)
-{
-#ifdef CONFIG_LOCAL_TIMERS
- /* Setup the local timer base */
- twd_base = __io_address(U8500_TWD_BASE);
-#endif
- /* Setup the MTU base */
- mtu_base = __io_address(U8500_MTU0_BASE);
-
- nmdk_timer_init();
-}
-
-static struct sys_timer u8500_timer = {
- .init = u8500_timer_init,
+ &u8500_i2c0_device,
+ &ux500_i2c1_device,
+ &ux500_i2c2_device,
+ &ux500_i2c3_device,
};
static void __init u8500_init_machine(void)
{
int i;
+ u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
+ ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
+ ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
+ ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data;
+
+ u8500_ssp0_device.dev.platform_data = &ssp0_platform_data;
+
/* Register the active AMBA devices on this board */
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
amba_device_register(amba_devs[i], &iomem_resource);
@@ -239,8 +143,8 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
.io_pg_offst = (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
.boot_params = 0x100,
.map_io = u8500_map_io,
- .init_irq = u8500_init_irq,
+ .init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
- .timer = &u8500_timer,
+ .timer = &ux500_timer,
.init_machine = u8500_init_machine,
MACHINE_END
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
new file mode 100644
index 00000000000..4430e69cf53
--- /dev/null
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/devices.h>
+#include <mach/setup.h>
+
+static struct amba_device *amba_board_devs[] __initdata = {
+ &ux500_uart0_device,
+ &ux500_uart1_device,
+ &ux500_uart2_device,
+};
+
+static void __init u5500_init_machine(void)
+{
+ u5500_init_devices();
+
+ amba_add_devices(amba_board_devs, ARRAY_SIZE(amba_board_devs));
+}
+
+MACHINE_START(U8500, "ST-Ericsson U5500 Platform")
+ .phys_io = UX500_UART0_BASE,
+ .io_pg_offst = (IO_ADDRESS(UX500_UART0_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = u5500_map_io,
+ .init_irq = ux500_init_irq,
+ .timer = &ux500_timer,
+ .init_machine = u5500_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 8359a73d004..1b2c9890e8b 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2009 ST-Ericsson
- * heavily based on realview platform
+ * Copyright (C) 2009 STMicroelectronics
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -12,33 +12,130 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/mutex.h>
+#include <linux/io.h>
#include <asm/clkdev.h>
-/* currently the clk structure
- * just supports rate. This would
- * be extended as and when new devices are
- * added - TODO
- */
-struct clk {
- unsigned long rate;
-};
+#include <mach/hardware.h>
+#include "clock.h"
+
+#define PRCC_PCKEN 0x00
+#define PRCC_PCKDIS 0x04
+#define PRCC_KCKEN 0x08
+#define PRCC_KCKDIS 0x0C
+
+#define PRCM_YYCLKEN0_MGT_SET 0x510
+#define PRCM_YYCLKEN1_MGT_SET 0x514
+#define PRCM_YYCLKEN0_MGT_CLR 0x518
+#define PRCM_YYCLKEN1_MGT_CLR 0x51C
+#define PRCM_YYCLKEN0_MGT_VAL 0x520
+#define PRCM_YYCLKEN1_MGT_VAL 0x524
+
+#define PRCM_SVAMMDSPCLK_MGT 0x008
+#define PRCM_SIAMMDSPCLK_MGT 0x00C
+#define PRCM_SGACLK_MGT 0x014
+#define PRCM_UARTCLK_MGT 0x018
+#define PRCM_MSP02CLK_MGT 0x01C
+#define PRCM_MSP1CLK_MGT 0x288
+#define PRCM_I2CCLK_MGT 0x020
+#define PRCM_SDMMCCLK_MGT 0x024
+#define PRCM_SLIMCLK_MGT 0x028
+#define PRCM_PER1CLK_MGT 0x02C
+#define PRCM_PER2CLK_MGT 0x030
+#define PRCM_PER3CLK_MGT 0x034
+#define PRCM_PER5CLK_MGT 0x038
+#define PRCM_PER6CLK_MGT 0x03C
+#define PRCM_PER7CLK_MGT 0x040
+#define PRCM_LCDCLK_MGT 0x044
+#define PRCM_BMLCLK_MGT 0x04C
+#define PRCM_HSITXCLK_MGT 0x050
+#define PRCM_HSIRXCLK_MGT 0x054
+#define PRCM_HDMICLK_MGT 0x058
+#define PRCM_APEATCLK_MGT 0x05C
+#define PRCM_APETRACECLK_MGT 0x060
+#define PRCM_MCDECLK_MGT 0x064
+#define PRCM_IPI2CCLK_MGT 0x068
+#define PRCM_DSIALTCLK_MGT 0x06C
+#define PRCM_DMACLK_MGT 0x074
+#define PRCM_B2R2CLK_MGT 0x078
+#define PRCM_TVCLK_MGT 0x07C
+#define PRCM_UNIPROCLK_MGT 0x278
+#define PRCM_SSPCLK_MGT 0x280
+#define PRCM_RNGCLK_MGT 0x284
+#define PRCM_UICCCLK_MGT 0x27C
+
+#define PRCM_MGT_ENABLE (1 << 8)
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+ if (clk->enabled++ == 0) {
+ if (clk->parent_cluster)
+ __clk_enable(clk->parent_cluster);
+
+ if (clk->parent_periph)
+ __clk_enable(clk->parent_periph);
+
+ if (clk->ops && clk->ops->enable)
+ clk->ops->enable(clk);
+ }
+}
int clk_enable(struct clk *clk)
{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
return 0;
}
EXPORT_SYMBOL(clk_enable);
+static void __clk_disable(struct clk *clk)
+{
+ if (--clk->enabled == 0) {
+ if (clk->ops && clk->ops->disable)
+ clk->ops->disable(clk);
+
+ if (clk->parent_periph)
+ __clk_disable(clk->parent_periph);
+
+ if (clk->parent_cluster)
+ __clk_disable(clk->parent_cluster);
+ }
+}
+
void clk_disable(struct clk *clk)
{
+ unsigned long flags;
+
+ WARN_ON(!clk->enabled);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
- return clk->rate;
+ unsigned long rate;
+
+ if (clk->ops && clk->ops->get_rate)
+ return clk->ops->get_rate(clk);
+
+ rate = clk->rate;
+ if (!rate) {
+ if (clk->parent_periph)
+ rate = clk_get_rate(clk->parent_periph);
+ else if (clk->parent_cluster)
+ rate = clk_get_rate(clk->parent_cluster);
+ }
+
+ return rate;
}
EXPORT_SYMBOL(clk_get_rate);
@@ -56,37 +153,373 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
}
EXPORT_SYMBOL(clk_set_rate);
-/* ssp clock */
-static struct clk ssp_clk = {
- .rate = 48000000,
+static void clk_prcmu_enable(struct clk *clk)
+{
+ void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
+ + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off;
+
+ writel(1 << clk->prcmu_cg_bit, cg_set_reg);
+}
+
+static void clk_prcmu_disable(struct clk *clk)
+{
+ void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE)
+ + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off;
+
+ writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
+}
+
+/* ED doesn't have the combined set/clr registers */
+static void clk_prcmu_ed_enable(struct clk *clk)
+{
+ void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+ + clk->prcmu_cg_mgt;
+
+ writel(readl(addr) | PRCM_MGT_ENABLE, addr);
+}
+
+static void clk_prcmu_ed_disable(struct clk *clk)
+{
+ void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+ + clk->prcmu_cg_mgt;
+
+ writel(readl(addr) & ~PRCM_MGT_ENABLE, addr);
+}
+
+static struct clkops clk_prcmu_ops = {
+ .enable = clk_prcmu_enable,
+ .disable = clk_prcmu_disable,
};
-/* fixed clock */
-static struct clk f38_clk = {
- .rate = 38400000,
+static unsigned int clkrst_base[] = {
+ [1] = U8500_CLKRST1_BASE,
+ [2] = U8500_CLKRST2_BASE,
+ [3] = U8500_CLKRST3_BASE,
+ [5] = U8500_CLKRST5_BASE,
+ [6] = U8500_CLKRST6_BASE,
+ [7] = U8500_CLKRST7_BASE_ED,
};
-static struct clk_lookup lookups[] = {
- {
- /* UART0 */
- .dev_id = "uart0",
- .clk = &f38_clk,
- }, { /* UART1 */
- .dev_id = "uart1",
- .clk = &f38_clk,
- }, { /* UART2 */
- .dev_id = "uart2",
- .clk = &f38_clk,
- }, { /* SSP */
- .dev_id = "pl022",
- .clk = &ssp_clk,
- }
+static void clk_prcc_enable(struct clk *clk)
+{
+ void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
+
+ if (clk->prcc_kernel != -1)
+ writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN);
+
+ if (clk->prcc_bus != -1)
+ writel(1 << clk->prcc_bus, addr + PRCC_PCKEN);
+}
+
+static void clk_prcc_disable(struct clk *clk)
+{
+ void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
+
+ if (clk->prcc_bus != -1)
+ writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS);
+
+ if (clk->prcc_kernel != -1)
+ writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS);
+}
+
+static struct clkops clk_prcc_ops = {
+ .enable = clk_prcc_enable,
+ .disable = clk_prcc_disable,
+};
+
+static struct clk clk_32khz = {
+ .rate = 32000,
+};
+
+/*
+ * PRCMU level clock gating
+ */
+
+/* Bank 0 */
+static DEFINE_PRCMU_CLK(svaclk, 0x0, 2, SVAMMDSPCLK);
+static DEFINE_PRCMU_CLK(siaclk, 0x0, 3, SIAMMDSPCLK);
+static DEFINE_PRCMU_CLK(sgaclk, 0x0, 4, SGACLK);
+static DEFINE_PRCMU_CLK_RATE(uartclk, 0x0, 5, UARTCLK, 38400000);
+static DEFINE_PRCMU_CLK(msp02clk, 0x0, 6, MSP02CLK);
+static DEFINE_PRCMU_CLK(msp1clk, 0x0, 7, MSP1CLK); /* v1 */
+static DEFINE_PRCMU_CLK_RATE(i2cclk, 0x0, 8, I2CCLK, 48000000);
+static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 50000000);
+static DEFINE_PRCMU_CLK(slimclk, 0x0, 10, SLIMCLK);
+static DEFINE_PRCMU_CLK(per1clk, 0x0, 11, PER1CLK);
+static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK);
+static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK);
+static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK);
+static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000);
+static DEFINE_PRCMU_CLK_RATE(per7clk, 0x0, 16, PER7CLK, 100000000);
+static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK);
+static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK);
+static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK);
+static DEFINE_PRCMU_CLK(hsirxclk, 0x0, 20, HSIRXCLK);
+static DEFINE_PRCMU_CLK(hdmiclk, 0x0, 21, HDMICLK);
+static DEFINE_PRCMU_CLK(apeatclk, 0x0, 22, APEATCLK);
+static DEFINE_PRCMU_CLK(apetraceclk, 0x0, 23, APETRACECLK);
+static DEFINE_PRCMU_CLK(mcdeclk, 0x0, 24, MCDECLK);
+static DEFINE_PRCMU_CLK(ipi2clk, 0x0, 25, IPI2CCLK);
+static DEFINE_PRCMU_CLK(dsialtclk, 0x0, 26, DSIALTCLK); /* v1 */
+static DEFINE_PRCMU_CLK(dmaclk, 0x0, 27, DMACLK);
+static DEFINE_PRCMU_CLK(b2r2clk, 0x0, 28, B2R2CLK);
+static DEFINE_PRCMU_CLK(tvclk, 0x0, 29, TVCLK);
+static DEFINE_PRCMU_CLK(uniproclk, 0x0, 30, UNIPROCLK); /* v1 */
+static DEFINE_PRCMU_CLK_RATE(sspclk, 0x0, 31, SSPCLK, 48000000); /* v1 */
+
+/* Bank 1 */
+static DEFINE_PRCMU_CLK(rngclk, 0x4, 0, RNGCLK); /* v1 */
+static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */
+
+/*
+ * PRCC level clock gating
+ * Format: per#, clk, PCKEN bit, KCKEN bit, parent
+ */
+
+/* Peripheral Cluster #1 */
+static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL);
+static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk);
+static DEFINE_PRCC_CLK(1, spi3_ed, 7, 7, NULL);
+static DEFINE_PRCC_CLK(1, spi3_v1, 7, -1, NULL);
+static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(1, msp1_ed, 4, 4, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, msp1_v1, 4, 4, &clk_msp1clk);
+static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk);
+static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk);
+
+/* Peripheral Cluster #2 */
+
+static DEFINE_PRCC_CLK(2, gpio1_ed, 12, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssitx_ed, 11, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssirx_ed, 10, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi0_ed, 9, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3_ed, 8, 6, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1_ed, 7, 5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2_ed, 6, 4, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4_ed, 4, 2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, pwl_ed, 3, 1, NULL);
+static DEFINE_PRCC_CLK(2, spi1_ed, 2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2_ed, 1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3_ed, 0, 0, &clk_i2cclk);
+
+static DEFINE_PRCC_CLK(2, gpio1_v1, 11, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssitx_v1, 10, 7, NULL);
+static DEFINE_PRCC_CLK(2, ssirx_v1, 9, 6, NULL);
+static DEFINE_PRCC_CLK(2, spi0_v1, 8, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3_v1, 7, 5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1_v1, 6, 4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2_v1, 5, 3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4_v1, 4, 2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, pwl_v1, 3, 1, NULL);
+static DEFINE_PRCC_CLK(2, spi1_v1, 2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2_v1, 1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3_v1, 0, 0, &clk_i2cclk);
+
+/* Peripheral Cluster #3 */
+static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL);
+static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk);
+static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz);
+static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1_ed, 2, 2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp0_ed, 1, 1, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1_v1, 2, 2, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, ssp0_v1, 1, 1, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL);
+
+/* Peripheral Cluster #4 is in the always on domain */
+
+/* Peripheral Cluster #5 */
+static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL);
+static DEFINE_PRCC_CLK(5, usb_ed, 0, 0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL);
+
+/* Peripheral Cluster #6 */
+
+static DEFINE_PRCC_CLK(6, mtu1_v1, 8, -1, NULL);
+static DEFINE_PRCC_CLK(6, mtu0_v1, 7, -1, NULL);
+static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL);
+static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL);
+static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL);
+static DEFINE_PRCC_CLK(6, unipro_v1, 4, 1, &clk_uniproclk);
+static DEFINE_PRCC_CLK(6, cryp1_ed, 4, -1, NULL);
+static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL);
+static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL);
+static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL);
+static DEFINE_PRCC_CLK(6, rng_ed, 0, 0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk);
+
+/* Peripheral Cluster #7 */
+
+static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL);
+static DEFINE_PRCC_CLK(7, mtu1_ed, 3, -1, NULL);
+static DEFINE_PRCC_CLK(7, mtu0_ed, 2, -1, NULL);
+static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL);
+static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL);
+
+static struct clk_lookup u8500_common_clks[] = {
+ /* Peripheral Cluster #1 */
+ CLK(gpio0, "gpio.0", NULL),
+ CLK(gpio0, "gpio.1", NULL),
+ CLK(slimbus0, "slimbus0", NULL),
+ CLK(i2c2, "nmk-i2c.2", NULL),
+ CLK(sdi0, "sdi0", NULL),
+ CLK(msp0, "msp0", NULL),
+ CLK(i2c1, "nmk-i2c.1", NULL),
+ CLK(uart1, "uart1", NULL),
+ CLK(uart0, "uart0", NULL),
+
+ /* Peripheral Cluster #3 */
+ CLK(gpio2, "gpio.2", NULL),
+ CLK(gpio2, "gpio.3", NULL),
+ CLK(gpio2, "gpio.4", NULL),
+ CLK(gpio2, "gpio.5", NULL),
+ CLK(sdi5, "sdi5", NULL),
+ CLK(uart2, "uart2", NULL),
+ CLK(ske, "ske", NULL),
+ CLK(sdi2, "sdi2", NULL),
+ CLK(i2c0, "nmk-i2c.0", NULL),
+ CLK(fsmc, "fsmc", NULL),
+
+ /* Peripheral Cluster #5 */
+ CLK(gpio3, "gpio.8", NULL),
+
+ /* Peripheral Cluster #6 */
+ CLK(hash1, "hash1", NULL),
+ CLK(pka, "pka", NULL),
+ CLK(hash0, "hash0", NULL),
+ CLK(cryp0, "cryp0", NULL),
+
+ /* PRCMU level clock gating */
+
+ /* Bank 0 */
+ CLK(svaclk, "sva", NULL),
+ CLK(siaclk, "sia", NULL),
+ CLK(sgaclk, "sga", NULL),
+ CLK(slimclk, "slim", NULL),
+ CLK(lcdclk, "lcd", NULL),
+ CLK(bmlclk, "bml", NULL),
+ CLK(hsitxclk, "stm-hsi.0", NULL),
+ CLK(hsirxclk, "stm-hsi.1", NULL),
+ CLK(hdmiclk, "hdmi", NULL),
+ CLK(apeatclk, "apeat", NULL),
+ CLK(apetraceclk, "apetrace", NULL),
+ CLK(mcdeclk, "mcde", NULL),
+ CLK(ipi2clk, "ipi2", NULL),
+ CLK(dmaclk, "dma40", NULL),
+ CLK(b2r2clk, "b2r2", NULL),
+ CLK(tvclk, "tv", NULL),
+};
+
+static struct clk_lookup u8500_ed_clks[] = {
+ /* Peripheral Cluster #1 */
+ CLK(spi3_ed, "spi3", NULL),
+ CLK(msp1_ed, "msp1", NULL),
+
+ /* Peripheral Cluster #2 */
+ CLK(gpio1_ed, "gpio.6", NULL),
+ CLK(gpio1_ed, "gpio.7", NULL),
+ CLK(ssitx_ed, "ssitx", NULL),
+ CLK(ssirx_ed, "ssirx", NULL),
+ CLK(spi0_ed, "spi0", NULL),
+ CLK(sdi3_ed, "sdi3", NULL),
+ CLK(sdi1_ed, "sdi1", NULL),
+ CLK(msp2_ed, "msp2", NULL),
+ CLK(sdi4_ed, "sdi4", NULL),
+ CLK(pwl_ed, "pwl", NULL),
+ CLK(spi1_ed, "spi1", NULL),
+ CLK(spi2_ed, "spi2", NULL),
+ CLK(i2c3_ed, "nmk-i2c.3", NULL),
+
+ /* Peripheral Cluster #3 */
+ CLK(ssp1_ed, "ssp1", NULL),
+ CLK(ssp0_ed, "ssp0", NULL),
+
+ /* Peripheral Cluster #5 */
+ CLK(usb_ed, "musb_hdrc.0", "usb"),
+
+ /* Peripheral Cluster #6 */
+ CLK(dmc_ed, "dmc", NULL),
+ CLK(cryp1_ed, "cryp1", NULL),
+ CLK(rng_ed, "rng", NULL),
+
+ /* Peripheral Cluster #7 */
+ CLK(tzpc0_ed, "tzpc0", NULL),
+ CLK(mtu1_ed, "mtu1", NULL),
+ CLK(mtu0_ed, "mtu0", NULL),
+ CLK(wdg_ed, "wdg", NULL),
+ CLK(cfgreg_ed, "cfgreg", NULL),
+};
+
+static struct clk_lookup u8500_v1_clks[] = {
+ /* Peripheral Cluster #1 */
+ CLK(i2c4, "nmk-i2c.4", NULL),
+ CLK(spi3_v1, "spi3", NULL),
+ CLK(msp1_v1, "msp1", NULL),
+
+ /* Peripheral Cluster #2 */
+ CLK(gpio1_v1, "gpio.6", NULL),
+ CLK(gpio1_v1, "gpio.7", NULL),
+ CLK(ssitx_v1, "ssitx", NULL),
+ CLK(ssirx_v1, "ssirx", NULL),
+ CLK(spi0_v1, "spi0", NULL),
+ CLK(sdi3_v1, "sdi3", NULL),
+ CLK(sdi1_v1, "sdi1", NULL),
+ CLK(msp2_v1, "msp2", NULL),
+ CLK(sdi4_v1, "sdi4", NULL),
+ CLK(pwl_v1, "pwl", NULL),
+ CLK(spi1_v1, "spi1", NULL),
+ CLK(spi2_v1, "spi2", NULL),
+ CLK(i2c3_v1, "nmk-i2c.3", NULL),
+
+ /* Peripheral Cluster #3 */
+ CLK(ssp1_v1, "ssp1", NULL),
+ CLK(ssp0_v1, "ssp0", NULL),
+
+ /* Peripheral Cluster #5 */
+ CLK(usb_v1, "musb_hdrc.0", "usb"),
+
+ /* Peripheral Cluster #6 */
+ CLK(mtu1_v1, "mtu1", NULL),
+ CLK(mtu0_v1, "mtu0", NULL),
+ CLK(cfgreg_v1, "cfgreg", NULL),
+ CLK(hash1, "hash1", NULL),
+ CLK(unipro_v1, "unipro", NULL),
+ CLK(rng_v1, "rng", NULL),
+
+ /* PRCMU level clock gating */
+
+ /* Bank 0 */
+ CLK(uniproclk, "uniproclk", NULL),
+ CLK(dsialtclk, "dsialt", NULL),
+
+ /* Bank 1 */
+ CLK(rngclk, "rng", NULL),
+ CLK(uiccclk, "uicc", NULL),
};
static int __init clk_init(void)
{
- /* register the clock lookups */
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+ if (cpu_is_u8500ed()) {
+ clk_prcmu_ops.enable = clk_prcmu_ed_enable;
+ clk_prcmu_ops.disable = clk_prcmu_ed_disable;
+ } else if (cpu_is_u5500()) {
+ /* Clock tree for U5500 not implemented yet */
+ clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
+ clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
+ }
+
+ clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
+ if (cpu_is_u8500ed())
+ clkdev_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks));
+ else
+ clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
+
return 0;
}
arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
new file mode 100644
index 00000000000..e4f99b65026
--- /dev/null
+++ b/arch/arm/mach-ux500/clock.h
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2010 ST-Ericsson
+ * Copyright (C) 2009 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * struct clkops - ux500 clock operations
+ * @enable: function to enable the clock
+ * @disable: function to disable the clock
+ * @get_rate: function to get the current clock rate
+ *
+ * This structure contains function pointers to functions that will be used to
+ * control the clock. All of these functions are optional. If get_rate is
+ * NULL, the rate in the struct clk will be used.
+ */
+struct clkops {
+ void (*enable) (struct clk *);
+ void (*disable) (struct clk *);
+ unsigned long (*get_rate) (struct clk *);
+};
+
+/**
+ * struct clk - ux500 clock structure
+ * @ops: pointer to clkops struct used to control this clock
+ * @name: name, for debugging
+ * @enabled: refcount. positive if enabled, zero if disabled
+ * @rate: fixed rate for clocks which don't implement
+ * ops->getrate
+ * @prcmu_cg_off: address offset of the combined enable/disable register
+ * (used on u8500v1)
+ * @prcmu_cg_bit: bit in the combined enable/disable register (used on
+ * u8500v1)
+ * @prcmu_cg_mgt: address of the enable/disable register (used on
+ * u8500ed)
+ * @cluster: peripheral cluster number
+ * @prcc_bus: bit for the bus clock in the peripheral's CLKRST
+ * @prcc_kernel: bit for the kernel clock in the peripheral's CLKRST.
+ * -1 if no kernel clock exists.
+ * @parent_cluster: pointer to parent's cluster clk struct
+ * @parent_periph: pointer to parent's peripheral clk struct
+ *
+ * Peripherals are organised into clusters, and each cluster has an associated
+ * bus clock. Some peripherals also have a parent peripheral clock.
+ *
+ * In order to enable a clock for a peripheral, we need to enable:
+ * (1) the parent cluster (bus) clock at the PRCMU level
+ * (2) the parent peripheral clock (if any) at the PRCMU level
+ * (3) the peripheral's bus & kernel clock at the PRCC level
+ *
+ * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each
+ * of the cluster and peripheral clocks, and hooking these as the parents of
+ * the individual peripheral clocks.
+ *
+ * (3) is handled by specifying the bits in the PRCC control registers required
+ * to enable these clocks and modifying them in the ->enable and
+ * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK).
+ *
+ * This structure describes both the PRCMU-level clocks and PRCC-level clocks.
+ * The prcmu_* fields are only used for the PRCMU clocks, and the cluster,
+ * prcc, and parent pointers are only used for the PRCC-level clocks.
+ */
+struct clk {
+ const struct clkops *ops;
+ const char *name;
+ unsigned int enabled;
+
+ unsigned long rate;
+ struct list_head list;
+
+ /* These three are only for PRCMU clks */
+
+ unsigned int prcmu_cg_off;
+ unsigned int prcmu_cg_bit;
+ unsigned int prcmu_cg_mgt;
+
+ /* The rest are only for PRCC clks */
+
+ int cluster;
+ unsigned int prcc_bus;
+ unsigned int prcc_kernel;
+
+ struct clk *parent_cluster;
+ struct clk *parent_periph;
+};
+
+#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg) \
+struct clk clk_##_name = { \
+ .name = #_name, \
+ .ops = &clk_prcmu_ops, \
+ .prcmu_cg_off = _cg_off, \
+ .prcmu_cg_bit = _cg_bit, \
+ .prcmu_cg_mgt = PRCM_##_reg##_MGT \
+ }
+
+#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate) \
+struct clk clk_##_name = { \
+ .name = #_name, \
+ .ops = &clk_prcmu_ops, \
+ .prcmu_cg_off = _cg_off, \
+ .prcmu_cg_bit = _cg_bit, \
+ .rate = _rate, \
+ .prcmu_cg_mgt = PRCM_##_reg##_MGT \
+ }
+
+#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk) \
+struct clk clk_##_name = { \
+ .name = #_name, \
+ .ops = &clk_prcc_ops, \
+ .cluster = _pclust, \
+ .prcc_bus = _bus_en, \
+ .prcc_kernel = _kernel_en, \
+ .parent_cluster = &clk_per##_pclust##clk, \
+ .parent_periph = _kernclk \
+ }
+
+#define CLK(_clk, _devname, _conname) \
+ { \
+ .clk = &clk_##_clk, \
+ .dev_id = _devname, \
+ .con_id = _conname, \
+ }
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
new file mode 100644
index 00000000000..6a3ac4539f1
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/devices.h>
+#include <mach/setup.h>
+
+static struct map_desc u5500_io_desc[] __initdata = {
+ __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
+};
+
+static struct platform_device *u5500_platform_devs[] __initdata = {
+ &u5500_gpio_devs[0],
+ &u5500_gpio_devs[1],
+ &u5500_gpio_devs[2],
+ &u5500_gpio_devs[3],
+ &u5500_gpio_devs[4],
+ &u5500_gpio_devs[5],
+ &u5500_gpio_devs[6],
+ &u5500_gpio_devs[7],
+};
+
+void __init u5500_map_io(void)
+{
+ ux500_map_io();
+
+ iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
+}
+
+void __init u5500_init_devices(void)
+{
+ ux500_init_devices();
+
+ platform_add_devices(u5500_platform_devs,
+ ARRAY_SIZE(u5500_platform_devs));
+}
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 397bc1f9ed9..d04299f3b6b 100644
--- a/arch/arm/mach-ux500/cpu-u8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -13,44 +13,55 @@
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
-#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
+#include <mach/setup.h>
+#include <mach/devices.h>
-/* add any platform devices here - TODO */
static struct platform_device *platform_devs[] __initdata = {
- /* yet to be added, add i2c0, gpio.. */
+ &u8500_gpio_devs[0],
+ &u8500_gpio_devs[1],
+ &u8500_gpio_devs[2],
+ &u8500_gpio_devs[3],
+ &u8500_gpio_devs[4],
+ &u8500_gpio_devs[5],
+ &u8500_gpio_devs[6],
+ &u8500_gpio_devs[7],
+ &u8500_gpio_devs[8],
};
-#define __IO_DEV_DESC(x, sz) { \
- .virtual = IO_ADDRESS(x), \
- .pfn = __phys_to_pfn(x), \
- .length = sz, \
- .type = MT_DEVICE, \
-}
-
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_io_desc[] __initdata = {
- __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
+};
+
+static struct map_desc u8500ed_io_desc[] __initdata = {
+ __IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K),
+};
+
+static struct map_desc u8500v1_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
};
void __init u8500_map_io(void)
{
+ ux500_map_io();
+
iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
-}
-void __init u8500_init_irq(void)
-{
- gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29);
- gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+ if (cpu_is_u8500ed())
+ iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc));
+ else
+ iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc));
}
/*
@@ -58,6 +69,8 @@ void __init u8500_init_irq(void)
*/
void __init u8500_init_devices(void)
{
+ ux500_init_devices();
+
/* Register the platform devices */
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
new file mode 100644
index 00000000000..d81ad023963
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/localtimer.h>
+
+#include <plat/mtu.h>
+#include <mach/hardware.h>
+#include <mach/setup.h>
+#include <mach/devices.h>
+
+#include "clock.h"
+
+static struct map_desc ux500_io_desc[] __initdata = {
+ __IO_DEV_DESC(UX500_UART0_BASE, SZ_4K),
+ __IO_DEV_DESC(UX500_UART2_BASE, SZ_4K),
+
+ __IO_DEV_DESC(UX500_GIC_CPU_BASE, SZ_4K),
+ __IO_DEV_DESC(UX500_GIC_DIST_BASE, SZ_4K),
+ __IO_DEV_DESC(UX500_L2CC_BASE, SZ_4K),
+ __IO_DEV_DESC(UX500_TWD_BASE, SZ_4K),
+ __IO_DEV_DESC(UX500_SCU_BASE, SZ_4K),
+
+ __IO_DEV_DESC(UX500_CLKRST1_BASE, SZ_4K),
+ __IO_DEV_DESC(UX500_CLKRST2_BASE, SZ_4K),
+ __IO_DEV_DESC(UX500_CLKRST3_BASE, SZ_4K),
+ __IO_DEV_DESC(UX500_CLKRST5_BASE, SZ_4K),
+ __IO_DEV_DESC(UX500_CLKRST6_BASE, SZ_4K),
+
+ __IO_DEV_DESC(UX500_MTU0_BASE, SZ_4K),
+ __IO_DEV_DESC(UX500_MTU1_BASE, SZ_4K),
+
+ __IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K),
+};
+
+static struct amba_device *ux500_amba_devs[] __initdata = {
+ &ux500_pl031_device,
+};
+
+void __init ux500_map_io(void)
+{
+ iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc));
+}
+
+void __init ux500_init_devices(void)
+{
+ amba_add_devices(ux500_amba_devs, ARRAY_SIZE(ux500_amba_devs));
+}
+
+void __init ux500_init_irq(void)
+{
+ gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
+ gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
+}
+
+#ifdef CONFIG_CACHE_L2X0
+static int ux500_l2x0_init(void)
+{
+ void __iomem *l2x0_base;
+
+ l2x0_base = __io_address(UX500_L2CC_BASE);
+
+ /* 64KB way size, 8 way associativity, force WA */
+ l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+
+ return 0;
+}
+early_initcall(ux500_l2x0_init);
+#endif
+
+static void __init ux500_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+ /* Setup the local timer base */
+ twd_base = __io_address(UX500_TWD_BASE);
+#endif
+ /* Setup the MTU base */
+ if (cpu_is_u8500ed())
+ mtu_base = __io_address(U8500_MTU0_BASE_ED);
+ else
+ mtu_base = __io_address(UX500_MTU0_BASE);
+
+ nmdk_timer_init();
+}
+
+struct sys_timer ux500_timer = {
+ .init = ux500_timer_init,
+};
diff --git a/arch/arm/mach-ux500/devices-db5500.c b/arch/arm/mach-ux500/devices-db5500.c
new file mode 100644
index 00000000000..33e5b56bebb
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-db5500.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/devices.h>
+
+static struct nmk_gpio_platform_data u5500_gpio_data[] = {
+ GPIO_DATA("GPIO-0-31", 0),
+ GPIO_DATA("GPIO-32-63", 32), /* 36..63 not routed to pin */
+ GPIO_DATA("GPIO-64-95", 64), /* 83..95 not routed to pin */
+ GPIO_DATA("GPIO-96-127", 96), /* 102..127 not routed to pin */
+ GPIO_DATA("GPIO-128-159", 128), /* 149..159 not routed to pin */
+ GPIO_DATA("GPIO-160-191", 160),
+ GPIO_DATA("GPIO-192-223", 192),
+ GPIO_DATA("GPIO-224-255", 224), /* 228..255 not routed to pin */
+};
+
+static struct resource u5500_gpio_resources[] = {
+ GPIO_RESOURCE(0),
+ GPIO_RESOURCE(1),
+ GPIO_RESOURCE(2),
+ GPIO_RESOURCE(3),
+ GPIO_RESOURCE(4),
+ GPIO_RESOURCE(5),
+ GPIO_RESOURCE(6),
+ GPIO_RESOURCE(7),
+};
+
+struct platform_device u5500_gpio_devs[] = {
+ GPIO_DEVICE(0),
+ GPIO_DEVICE(1),
+ GPIO_DEVICE(2),
+ GPIO_DEVICE(3),
+ GPIO_DEVICE(4),
+ GPIO_DEVICE(5),
+ GPIO_DEVICE(6),
+ GPIO_DEVICE(7),
+};
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
new file mode 100644
index 00000000000..20334236afc
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+static struct nmk_gpio_platform_data u8500_gpio_data[] = {
+ GPIO_DATA("GPIO-0-31", 0),
+ GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */
+ GPIO_DATA("GPIO-64-95", 64),
+ GPIO_DATA("GPIO-96-127", 96), /* 98..127 not routed to pin */
+ GPIO_DATA("GPIO-128-159", 128),
+ GPIO_DATA("GPIO-160-191", 160), /* 172..191 not routed to pin */
+ GPIO_DATA("GPIO-192-223", 192),
+ GPIO_DATA("GPIO-224-255", 224), /* 231..255 not routed to pin */
+ GPIO_DATA("GPIO-256-288", 256), /* 268..288 not routed to pin */
+};
+
+static struct resource u8500_gpio_resources[] = {
+ GPIO_RESOURCE(0),
+ GPIO_RESOURCE(1),
+ GPIO_RESOURCE(2),
+ GPIO_RESOURCE(3),
+ GPIO_RESOURCE(4),
+ GPIO_RESOURCE(5),
+ GPIO_RESOURCE(6),
+ GPIO_RESOURCE(7),
+ GPIO_RESOURCE(8),
+};
+
+struct platform_device u8500_gpio_devs[] = {
+ GPIO_DEVICE(0),
+ GPIO_DEVICE(1),
+ GPIO_DEVICE(2),
+ GPIO_DEVICE(3),
+ GPIO_DEVICE(4),
+ GPIO_DEVICE(5),
+ GPIO_DEVICE(6),
+ GPIO_DEVICE(7),
+ GPIO_DEVICE(8),
+};
+
+struct amba_device u8500_ssp0_device = {
+ .dev = {
+ .coherent_dma_mask = ~0,
+ .init_name = "ssp0",
+ },
+ .res = {
+ .start = U8500_SSP0_BASE,
+ .end = U8500_SSP0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_SSP0, NO_IRQ },
+ /* ST-Ericsson modified id */
+ .periphid = SSP_PER_ID,
+};
+
+static struct resource u8500_i2c0_resources[] = {
+ [0] = {
+ .start = U8500_I2C0_BASE,
+ .end = U8500_I2C0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_I2C0,
+ .end = IRQ_I2C0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device u8500_i2c0_device = {
+ .name = "nmk-i2c",
+ .id = 0,
+ .resource = u8500_i2c0_resources,
+ .num_resources = ARRAY_SIZE(u8500_i2c0_resources),
+};
+
+static struct resource u8500_i2c4_resources[] = {
+ [0] = {
+ .start = U8500_I2C4_BASE,
+ .end = U8500_I2C4_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_I2C4,
+ .end = IRQ_I2C4,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device u8500_i2c4_device = {
+ .name = "nmk-i2c",
+ .id = 4,
+ .resource = u8500_i2c4_resources,
+ .num_resources = ARRAY_SIZE(u8500_i2c4_resources),
+};
diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c
new file mode 100644
index 00000000000..8a268893cb7
--- /dev/null
+++ b/arch/arm/mach-ux500/devices.c
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/amba/bus.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+#define __MEM_4K_RESOURCE(x) \
+ .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+struct amba_device ux500_pl031_device = {
+ .dev = {
+ .init_name = "pl031",
+ },
+ .res = {
+ .start = UX500_RTC_BASE,
+ .end = UX500_RTC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_RTC_RTT, NO_IRQ},
+};
+
+struct amba_device ux500_uart0_device = {
+ .dev = { .init_name = "uart0" },
+ __MEM_4K_RESOURCE(UX500_UART0_BASE),
+ .irq = {IRQ_UART0, NO_IRQ},
+};
+
+struct amba_device ux500_uart1_device = {
+ .dev = { .init_name = "uart1" },
+ __MEM_4K_RESOURCE(UX500_UART1_BASE),
+ .irq = {IRQ_UART1, NO_IRQ},
+};
+
+struct amba_device ux500_uart2_device = {
+ .dev = { .init_name = "uart2" },
+ __MEM_4K_RESOURCE(UX500_UART2_BASE),
+ .irq = {IRQ_UART2, NO_IRQ},
+};
+
+#define UX500_I2C_RESOURCES(id, size) \
+static struct resource ux500_i2c##id##_resources[] = { \
+ [0] = { \
+ .start = UX500_I2C##id##_BASE, \
+ .end = UX500_I2C##id##_BASE + size - 1, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ [1] = { \
+ .start = IRQ_I2C##id, \
+ .end = IRQ_I2C##id, \
+ .flags = IORESOURCE_IRQ \
+ } \
+}
+
+UX500_I2C_RESOURCES(1, SZ_4K);
+UX500_I2C_RESOURCES(2, SZ_4K);
+UX500_I2C_RESOURCES(3, SZ_4K);
+
+#define UX500_I2C_PDEVICE(cid) \
+struct platform_device ux500_i2c##cid##_device = { \
+ .name = "nmk-i2c", \
+ .id = cid, \
+ .num_resources = 2, \
+ .resource = ux500_i2c##cid##_resources, \
+}
+
+UX500_I2C_PDEVICE(1);
+UX500_I2C_PDEVICE(2);
+UX500_I2C_PDEVICE(3);
+
+void __init amba_add_devices(struct amba_device *devs[], int num)
+{
+ int i;
+
+ for (i = 0; i < num; i++) {
+ struct amba_device *d = devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+}
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
new file mode 100644
index 00000000000..545c80fc802
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_DB5500_REGS_H
+#define __MACH_DB5500_REGS_H
+
+#define U5500_PER1_BASE 0xA0020000
+#define U5500_PER2_BASE 0xA0010000
+#define U5500_PER3_BASE 0x80140000
+#define U5500_PER4_BASE 0x80150000
+#define U5500_PER5_BASE 0x80100000
+#define U5500_PER6_BASE 0x80120000
+
+#define U5500_GIC_DIST_BASE 0xA0411000
+#define U5500_GIC_CPU_BASE 0xA0410100
+#define U5500_DMA_BASE 0x90030000
+#define U5500_MCDE_BASE 0xA0400000
+#define U5500_MODEM_BASE 0xB0000000
+#define U5500_L2CC_BASE 0xA0412000
+#define U5500_SCU_BASE 0xA0410000
+#define U5500_DSI1_BASE 0xA0401000
+#define U5500_DSI2_BASE 0xA0402000
+#define U5500_SIA_BASE 0xA0100000
+#define U5500_SVA_BASE 0x80200000
+#define U5500_HSEM_BASE 0xA0000000
+#define U5500_NAND0_BASE 0x60000000
+#define U5500_NAND1_BASE 0x70000000
+#define U5500_TWD_BASE 0xa0410600
+#define U5500_B2R2_BASE 0xa0200000
+
+#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000)
+#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000)
+#define U5500_SDI2_BASE (U5500_PER1_BASE + 0x2000)
+#define U5500_UART0_BASE (U5500_PER1_BASE + 0x3000)
+#define U5500_I2C1_BASE (U5500_PER1_BASE + 0x4000)
+#define U5500_MSP0_BASE (U5500_PER1_BASE + 0x5000)
+#define U5500_GPIO0_BASE (U5500_PER1_BASE + 0xE000)
+#define U5500_CLKRST1_BASE (U5500_PER1_BASE + 0xF000)
+
+#define U5500_USBOTG_BASE (U5500_PER2_BASE + 0x0000)
+#define U5500_GPIO1_BASE (U5500_PER2_BASE + 0xE000)
+#define U5500_CLKRST2_BASE (U5500_PER2_BASE + 0xF000)
+
+#define U5500_KEYPAD_BASE (U5500_PER3_BASE + 0x0000)
+#define U5500_PWM_BASE (U5500_PER3_BASE + 0x1000)
+#define U5500_GPIO3_BASE (U5500_PER3_BASE + 0xE000)
+#define U5500_CLKRST3_BASE (U5500_PER3_BASE + 0xF000)
+
+#define U5500_BACKUPRAM0_BASE (U5500_PER4_BASE + 0x0000)
+#define U5500_BACKUPRAM1_BASE (U5500_PER4_BASE + 0x1000)
+#define U5500_RTT0_BASE (U5500_PER4_BASE + 0x2000)
+#define U5500_RTT1_BASE (U5500_PER4_BASE + 0x3000)
+#define U5500_RTC_BASE (U5500_PER4_BASE + 0x4000)
+#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000)
+#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000)
+#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000)
+#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000)
+#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000)
+#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000)
+
+#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000)
+#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000)
+#define U5500_SPI2_BASE (U5500_PER5_BASE + 0x2000)
+#define U5500_SPI3_BASE (U5500_PER5_BASE + 0x3000)
+#define U5500_UART1_BASE (U5500_PER5_BASE + 0x4000)
+#define U5500_UART2_BASE (U5500_PER5_BASE + 0x5000)
+#define U5500_UART3_BASE (U5500_PER5_BASE + 0x6000)
+#define U5500_SDI1_BASE (U5500_PER5_BASE + 0x7000)
+#define U5500_SDI3_BASE (U5500_PER5_BASE + 0x8000)
+#define U5500_SDI4_BASE (U5500_PER5_BASE + 0x9000)
+#define U5500_I2C2_BASE (U5500_PER5_BASE + 0xA000)
+#define U5500_I2C3_BASE (U5500_PER5_BASE + 0xB000)
+#define U5500_MSP2_BASE (U5500_PER5_BASE + 0xC000)
+#define U5500_IRDA_BASE (U5500_PER5_BASE + 0xD000)
+#define U5500_IRRC_BASE (U5500_PER5_BASE + 0x10000)
+#define U5500_GPIO4_BASE (U5500_PER5_BASE + 0x1E000)
+#define U5500_CLKRST5_BASE (U5500_PER5_BASE + 0x1F000)
+
+#define U5500_RNG_BASE (U5500_PER6_BASE + 0x0000)
+#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000)
+#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000)
+#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000)
+#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5000)
+#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000)
+#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000)
+#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000)
+#define U5500_CRYP0_BASE (U5500_PER6_BASE + 0xA000)
+#define U5500_CRYP1_BASE (U5500_PER6_BASE + 0xB000)
+#define U5500_CLKRST6_BASE (U5500_PER6_BASE + 0xF000)
+
+#define U5500_GPIOBANK0_BASE U5500_GPIO0_BASE
+#define U5500_GPIOBANK1_BASE (U5500_GPIO0_BASE + 0x80)
+#define U5500_GPIOBANK2_BASE U5500_GPIO1_BASE
+#define U5500_GPIOBANK3_BASE U5500_GPIO2_BASE
+#define U5500_GPIOBANK4_BASE U5500_GPIO3_BASE
+#define U5500_GPIOBANK5_BASE U5500_GPIO4_BASE
+#define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80)
+#define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
new file mode 100644
index 00000000000..9169e1e382a
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_DB8500_REGS_H
+#define __MACH_DB8500_REGS_H
+
+#define U8500_PER3_BASE 0x80000000
+#define U8500_STM_BASE 0x80100000
+#define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000)
+#define U8500_PER2_BASE 0x80110000
+#define U8500_PER1_BASE 0x80120000
+#define U8500_B2R2_BASE 0x80130000
+#define U8500_HSEM_BASE 0x80140000
+#define U8500_PER4_BASE 0x80150000
+#define U8500_ICN_BASE 0x81000000
+
+#define U8500_BOOT_ROM_BASE 0x90000000
+/* ASIC ID is at 0xff4 offset within this region */
+#define U8500_ASIC_ID_BASE 0x9001F000
+
+#define U8500_PER6_BASE 0xa03c0000
+#define U8500_PER5_BASE 0xa03e0000
+#define U8500_PER7_BASE_ED 0xa03d0000
+
+#define U8500_SVA_BASE 0xa0100000
+#define U8500_SIA_BASE 0xa0200000
+
+#define U8500_SGA_BASE 0xa0300000
+#define U8500_MCDE_BASE 0xa0350000
+#define U8500_DMA_BASE_ED 0xa0362000
+#define U8500_DMA_BASE 0x801C0000 /* v1 */
+
+#define U8500_SBAG_BASE 0xa0390000
+
+#define U8500_SCU_BASE 0xa0410000
+#define U8500_GIC_CPU_BASE 0xa0410100
+#define U8500_TWD_BASE 0xa0410600
+#define U8500_GIC_DIST_BASE 0xa0411000
+#define U8500_L2CC_BASE 0xa0412000
+
+#define U8500_MODEM_I2C 0xb7e02000
+
+#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000)
+#define U8500_GPIO1_BASE (U8500_PER3_BASE + 0xE000)
+#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000)
+#define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000)
+
+/* per7 base addressess */
+#define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000)
+#define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000)
+#define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000)
+#define U8500_TZPC0_BASE_ED (U8500_PER7_BASE_ED + 0xc000)
+#define U8500_CLKRST7_BASE_ED (U8500_PER7_BASE_ED + 0xf000)
+
+#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)
+
+/* per6 base addressess */
+#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000)
+#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000)
+#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000)
+#define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */
+#define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */
+#define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */
+#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000)
+#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000)
+
+/* per5 base addressess */
+#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000)
+#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000)
+
+/* per4 base addressess */
+#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000)
+#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000)
+#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000)
+#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x03000)
+#define U8500_RTC_BASE (U8500_PER4_BASE + 0x04000)
+#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000)
+#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000)
+#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
+#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000)
+
+/* per3 base addresses */
+#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000)
+#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000)
+
+/* per2 base addressess */
+#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000)
+#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000)
+
+/* per1 base addresses */
+#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000)
+#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000)
+#define U8500_I2C4_BASE (U8500_PER1_BASE + 0xa000)
+#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xb000)
+#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000)
+
+#define U8500_SHRM_GOP_INTERRUPT_BASE 0xB7C00040
+
+#define U8500_GPIOBANK0_BASE U8500_GPIO0_BASE
+#define U8500_GPIOBANK1_BASE (U8500_GPIO0_BASE + 0x80)
+#define U8500_GPIOBANK2_BASE U8500_GPIO1_BASE
+#define U8500_GPIOBANK3_BASE (U8500_GPIO1_BASE + 0x80)
+#define U8500_GPIOBANK4_BASE (U8500_GPIO1_BASE + 0x100)
+#define U8500_GPIOBANK5_BASE (U8500_GPIO1_BASE + 0x180)
+#define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE
+#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80)
+#define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 09cbfda8aee..c5203b7ea55 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -10,11 +10,19 @@
*/
#include <mach/hardware.h>
+#if CONFIG_UX500_DEBUG_UART > 2
+#error Invalid Ux500 debug UART
+#endif
+
+#define __UX500_UART(n) UX500_UART##n##_BASE
+#define UX500_UART(n) __UX500_UART(n)
+#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART)
+
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
- ldreq \rx, =U8500_UART2_BASE @ no, physical address
- ldrne \rx, =IO_ADDRESS(U8500_UART2_BASE) @ yes, virtual address
+ ldreq \rx, =UART_BASE @ no, physical address
+ ldrne \rx, =IO_ADDRESS(UART_BASE) @ yes, virtual address
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
new file mode 100644
index 00000000000..0422af00a56
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __ASM_ARCH_DEVICES_H__
+#define __ASM_ARCH_DEVICES_H__
+
+struct platform_device;
+struct amba_device;
+
+extern struct platform_device u5500_gpio_devs[];
+extern struct platform_device u8500_gpio_devs[];
+
+extern struct amba_device ux500_pl031_device;
+extern struct amba_device u8500_ssp0_device;
+extern struct amba_device ux500_uart0_device;
+extern struct amba_device ux500_uart1_device;
+extern struct amba_device ux500_uart2_device;
+
+extern struct platform_device ux500_i2c1_device;
+extern struct platform_device ux500_i2c2_device;
+extern struct platform_device ux500_i2c3_device;
+
+extern struct platform_device u8500_i2c0_device;
+extern struct platform_device u8500_i2c4_device;
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
index eece3301fef..60ea88db828 100644
--- a/arch/arm/mach-ux500/include/mach/entry-macro.S
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -17,7 +17,7 @@
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =IO_ADDRESS(U8500_GIC_CPU_BASE)
+ ldr \base, =IO_ADDRESS(UX500_GIC_CPU_BASE)
.endm
.macro arch_ret_to_user, tmp1, tmp2
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
new file mode 100644
index 00000000000..d548a622e7d
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/gpio.h
@@ -0,0 +1,50 @@
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+/*
+ * 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough
+ * room for a couple of GPIO expanders.
+ */
+#define ARCH_NR_GPIOS 350
+
+#include <plat/gpio.h>
+
+#define __GPIO_RESOURCE(soc, block) \
+ { \
+ .start = soc##_GPIOBANK##block##_BASE, \
+ .end = soc##_GPIOBANK##block##_BASE + 127, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = IRQ_GPIO##block, \
+ .end = IRQ_GPIO##block, \
+ .flags = IORESOURCE_IRQ, \
+ }
+
+#define __GPIO_DEVICE(soc, block) \
+ { \
+ .name = "gpio", \
+ .id = block, \
+ .num_resources = 2, \
+ .resource = &soc##_gpio_resources[block * 2], \
+ .dev = { \
+ .platform_data = &soc##_gpio_data[block], \
+ }, \
+ }
+
+#define GPIO_DATA(_name, first) \
+ { \
+ .name = _name, \
+ .first_gpio = first, \
+ .first_irq = NOMADIK_GPIO_TO_IRQ(first), \
+ }
+
+#ifdef CONFIG_UX500_SOC_DB8500
+#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U8500, block)
+#define GPIO_DEVICE(block) __GPIO_DEVICE(u8500, block)
+#elif defined(CONFIG_UX500_SOC_DB5500)
+#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U5500, block)
+#define GPIO_DEVICE(block) __GPIO_DEVICE(u5500, block)
+#endif
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 04ea836969b..8656379a830 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -23,109 +23,106 @@
/* typesafe io address */
#define __io_address(n) __io(IO_ADDRESS(n))
+/* used by some plat-nomadik code */
+#define io_p2v(n) __io_address(n)
-/*
- * Base address definitions for U8500 Onchip IPs. All the
- * peripherals are contained in a single 1 Mbyte region, with
- * AHB peripherals at the bottom and APB peripherals at the
- * top of the region. PER stands for PERIPHERAL region which
- * itself divided into sub regions.
- */
-#define U8500_PER3_BASE 0x80000000
-#define U8500_PER2_BASE 0x80110000
-#define U8500_PER1_BASE 0x80120000
-#define U8500_PER4_BASE 0x80150000
-
-#define U8500_PER6_BASE 0xa03c0000
-#define U8500_PER5_BASE 0xa03e0000
-#define U8500_PER7_BASE 0xa03d0000
-
-#define U8500_SVA_BASE 0xa0100000
-#define U8500_SIA_BASE 0xa0200000
-
-#define U8500_SGA_BASE 0xa0300000
-#define U8500_MCDE_BASE 0xa0350000
-#define U8500_DMA_BASE 0xa0362000
-
-#define U8500_SCU_BASE 0xa0410000
-#define U8500_GIC_CPU_BASE 0xa0410100
-#define U8500_TWD_BASE 0xa0410600
-#define U8500_GIC_DIST_BASE 0xa0411000
-#define U8500_L2CC_BASE 0xa0412000
-
-#define U8500_TWD_SIZE 0x100
-
-/* per7 base addressess */
-#define U8500_CR_BASE (U8500_PER7_BASE + 0x8000)
-#define U8500_MTU0_BASE (U8500_PER7_BASE + 0xa000)
-#define U8500_MTU1_BASE (U8500_PER7_BASE + 0xb000)
-#define U8500_TZPC0_BASE (U8500_PER7_BASE + 0xc000)
-#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000)
-
-/* per6 base addressess */
-#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000)
-#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000)
-#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000)
-#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000)
-#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000)
-#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000)
-
-/* per5 base addressess */
-#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000)
-#define U8500_GPIO5_BASE (U8500_PER5_BASE + 0x1e000)
-#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000)
-
-/* per4 base addressess */
-#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x0000)
-#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x1000)
-#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x2000)
-#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x3000)
-#define U8500_RTC_BASE (U8500_PER4_BASE + 0x4000)
-#define U8500_SCR_BASE (U8500_PER4_BASE + 0x5000)
-#define U8500_DMC_BASE (U8500_PER4_BASE + 0x6000)
-#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x7000)
-
-/* per3 base addressess */
-#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)
-#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000)
-#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000)
-#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000)
-#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000)
-#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000)
-#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000)
-#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000)
-#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xe000)
-#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000)
-
-/* per2 base addressess */
-#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000)
-#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000)
-#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000)
-#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000)
-#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000)
-#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000)
-#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000)
-#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000)
-#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000)
-#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000)
-#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000)
-#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xe000)
-#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000)
-
-/* per1 base addresses */
-#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000)
-#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)
-#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000)
-#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000)
-#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000)
-#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000)
-#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000)
-#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000)
-#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xa000)
-#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000)
-#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000)
+#include <mach/db8500-regs.h>
+#include <mach/db5500-regs.h>
+
+#ifdef CONFIG_UX500_SOC_DB8500
+#define UX500(periph) U8500_##periph##_BASE
+#elif defined(CONFIG_UX500_SOC_DB5500)
+#define UX500(periph) U5500_##periph##_BASE
+#endif
+
+#define UX500_BACKUPRAM0_BASE UX500(BACKUPRAM0)
+#define UX500_BACKUPRAM1_BASE UX500(BACKUPRAM1)
+#define UX500_B2R2_BASE UX500(B2R2)
+
+#define UX500_CLKRST1_BASE UX500(CLKRST1)
+#define UX500_CLKRST2_BASE UX500(CLKRST2)
+#define UX500_CLKRST3_BASE UX500(CLKRST3)
+#define UX500_CLKRST5_BASE UX500(CLKRST5)
+#define UX500_CLKRST6_BASE UX500(CLKRST6)
+
+#define UX500_DMA_BASE UX500(DMA)
+#define UX500_FSMC_BASE UX500(FSMC)
+
+#define UX500_GIC_CPU_BASE UX500(GIC_CPU)
+#define UX500_GIC_DIST_BASE UX500(GIC_DIST)
+
+#define UX500_I2C1_BASE UX500(I2C1)
+#define UX500_I2C2_BASE UX500(I2C2)
+#define UX500_I2C3_BASE UX500(I2C3)
+
+#define UX500_L2CC_BASE UX500(L2CC)
+#define UX500_MCDE_BASE UX500(MCDE)
+#define UX500_MTU0_BASE UX500(MTU0)
+#define UX500_MTU1_BASE UX500(MTU1)
+#define UX500_PRCMU_BASE UX500(PRCMU)
+
+#define UX500_RNG_BASE UX500(RNG)
+#define UX500_RTC_BASE UX500(RTC)
+
+#define UX500_SCU_BASE UX500(SCU)
+
+#define UX500_SDI0_BASE UX500(SDI0)
+#define UX500_SDI1_BASE UX500(SDI1)
+#define UX500_SDI2_BASE UX500(SDI2)
+#define UX500_SDI3_BASE UX500(SDI3)
+#define UX500_SDI4_BASE UX500(SDI4)
+
+#define UX500_SPI0_BASE UX500(SPI0)
+#define UX500_SPI1_BASE UX500(SPI1)
+#define UX500_SPI2_BASE UX500(SPI2)
+#define UX500_SPI3_BASE UX500(SPI3)
+
+#define UX500_SIA_BASE UX500(SIA)
+#define UX500_SVA_BASE UX500(SVA)
+
+#define UX500_TWD_BASE UX500(TWD)
+
+#define UX500_UART0_BASE UX500(UART0)
+#define UX500_UART1_BASE UX500(UART1)
+#define UX500_UART2_BASE UX500(UART2)
+
+#define UX500_USBOTG_BASE UX500(USBOTG)
/* ST-Ericsson modified pl022 id */
#define SSP_PER_ID 0x01080022
+#ifndef __ASSEMBLY__
+
+#include <asm/cputype.h>
+
+static inline bool cpu_is_u8500(void)
+{
+#ifdef CONFIG_UX500_SOC_DB8500
+ return 1;
+#else
+ return 0;
+#endif
+}
+
+static inline bool cpu_is_u8500ed(void)
+{
+ return cpu_is_u8500() && (read_cpuid_id() & 15) == 0;
+}
+
+static inline bool cpu_is_u8500v1(void)
+{
+ return cpu_is_u8500() && (read_cpuid_id() & 15) == 1;
+}
+
+static inline bool cpu_is_u5500(void)
+{
+#ifdef CONFIG_UX500_SOC_DB5500
+ return 1;
+#else
+ return 0;
+#endif
+}
+
+#endif
+
#endif /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 394b5dd2200..7970684b1d0 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -42,6 +42,7 @@
#define IRQ_AB4500 (IRQ_SHPI_START + 40)
#define IRQ_DISP (IRQ_SHPI_START + 48)
#define IRQ_SiPI3 (IRQ_SHPI_START + 49)
+#define IRQ_I2C4 (IRQ_SHPI_START + 51)
#define IRQ_SSP1 (IRQ_SHPI_START + 52)
#define IRQ_I2C2 (IRQ_SHPI_START + 55)
#define IRQ_SDMMC0 (IRQ_SHPI_START + 60)
@@ -66,6 +67,12 @@
/* There are 128 shared peripheral interrupts assigned to
* INTID[160:32]. The first 32 interrupts are reserved.
*/
-#define NR_IRQS 161
+#define U8500_SOC_NR_IRQS 161
+
+/* After chip-specific IRQ numbers we have the GPIO ones */
+#define NOMADIK_NR_GPIO 288
+#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + U8500_SOC_NR_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - U8500_SOC_NR_IRQS)
+#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
#endif /*ASM_ARCH_IRQS_H*/
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index cf0ce1687f2..e978dbd9e21 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -14,10 +14,28 @@
#include <asm/mach/time.h>
#include <linux/init.h>
-extern void u8500_map_io(void);
-extern void u8500_init_devices(void);
-extern void u8500_init_irq(void);
+extern void __init ux500_map_io(void);
+extern void __init u5500_map_io(void);
+extern void __init u8500_map_io(void);
+
+extern void __init ux500_init_devices(void);
+extern void __init u5500_init_devices(void);
+extern void __init u8500_init_devices(void);
+
+extern void __init ux500_init_irq(void);
/* We re-use nomadik_timer for this platform */
extern void nmdk_timer_init(void);
+extern void __init amba_add_devices(struct amba_device *devs[], int num);
+
+struct sys_timer;
+extern struct sys_timer ux500_timer;
+
+#define __IO_DEV_DESC(x, sz) { \
+ .virtual = IO_ADDRESS(x), \
+ .pfn = __phys_to_pfn(x), \
+ .length = sz, \
+ .type = MT_DEVICE, \
+}
+
#endif /* __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 8dfe7ca245d..438ef16aec9 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -30,7 +30,7 @@ volatile int __cpuinitdata pen_release = -1;
static unsigned int __init get_core_count(void)
{
- return scu_get_core_count(__io_address(U8500_SCU_BASE));
+ return scu_get_core_count(__io_address(UX500_SCU_BASE));
}
static DEFINE_SPINLOCK(boot_lock);
@@ -44,7 +44,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
- gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+ gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
/*
* let the primary processor know we're out of the
@@ -75,7 +75,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* that it has been released by resetting pen_release.
*/
pen_release = cpu;
- flush_cache_all();
+ __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+ outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
@@ -105,12 +106,12 @@ static void __init wakeup_secondary(void)
*/
#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
__raw_writel(virt_to_phys(u8500_secondary_startup),
- (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+ __io_address(UX500_BACKUPRAM0_BASE) +
U8500_CPU1_JUMPADDR_OFFSET);
#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
__raw_writel(0xA1FEED01,
- (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+ __io_address(UX500_BACKUPRAM0_BASE) +
U8500_CPU1_WAKEMAGIC_OFFSET);
/* make sure write buffer is drained */
@@ -171,7 +172,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
* boot CPU, but only if we have more than one CPU.
*/
percpu_timer_setup();
- scu_enable(__io_address(U8500_SCU_BASE));
+ scu_enable(__io_address(UX500_SCU_BASE));
wakeup_secondary();
}
}