summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ux500')
-rw-r--r--arch/arm/mach-ux500/Kconfig44
-rw-r--r--arch/arm/mach-ux500/Makefile3
-rw-r--r--arch/arm/mach-ux500/board-mop500-pins.c1
-rw-r--r--arch/arm/mach-ux500/board-mop500-regulators.c28
-rw-r--r--arch/arm/mach-ux500/board-mop500-sdi.c21
-rw-r--r--arch/arm/mach-ux500/board-mop500-u8500uib.c1
-rw-r--r--arch/arm/mach-ux500/board-mop500.c2
-rw-r--r--arch/arm/mach-ux500/board-mop500.h2
-rw-r--r--arch/arm/mach-ux500/clock.c7
-rw-r--r--arch/arm/mach-ux500/clock.h1
-rw-r--r--arch/arm/mach-ux500/cpu.c1
-rw-r--r--arch/arm/mach-ux500/devices-db8500.c6
-rw-r--r--arch/arm/mach-ux500/include/mach/entry-macro.S18
-rw-r--r--arch/arm/mach-ux500/include/mach/hardware.h2
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-ux500/include/mach/setup.h3
-rw-r--r--arch/arm/mach-ux500/localtimer.c29
-rw-r--r--arch/arm/mach-ux500/timer.c39
18 files changed, 112 insertions, 98 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index c59e8b892d6..9ec63581234 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -8,47 +8,55 @@ config UX500_SOC_COMMON
select PL310_ERRATA_753970
select ARM_ERRATA_754322
select ARM_ERRATA_764369
-
-menu "Ux500 SoC"
+ select CACHE_L2X0
config UX500_SOC_DB5500
- bool "DB5500"
+ bool
select MFD_DB5500_PRCMU
config UX500_SOC_DB8500
- bool "DB8500"
+ bool
select MFD_DB8500_PRCMU
select REGULATOR_DB8500_PRCMU
-
-endmenu
+ select CPU_FREQ_TABLE if CPU_FREQ
menu "Ux500 target platform (boards)"
-config MACH_U8500
- bool "U8500 Development platform"
- depends on UX500_SOC_DB8500
- select TPS6105X
+config MACH_MOP500
+ bool "U8500 Development platform, MOP500 versions"
+ select UX500_SOC_DB8500
+ select I2C
+ select I2C_NOMADIK
help
- Include support for the mop500 development platform.
+ Include support for the MOP500 development platform.
config MACH_HREFV60
- bool "U85000 Development platform, HREFv60 version"
- depends on UX500_SOC_DB8500
- help
- Include support for the HREFv60 new development platform.
+ bool "U8500 Development platform, HREFv60 version"
+ select MACH_MOP500
+ help
+ Include support for the HREFv60 new development platform.
+ Includes HREFv70, v71 etc.
config MACH_SNOWBALL
bool "U8500 Snowball platform"
- depends on UX500_SOC_DB8500
- select MACH_U8500
+ select MACH_MOP500
help
Include support for the snowball development platform.
config MACH_U5500
bool "U5500 Development platform"
- depends on UX500_SOC_DB5500
+ select UX500_SOC_DB5500
help
Include support for the U5500 development platform.
+
+config UX500_AUTO_PLATFORM
+ def_bool y
+ depends on !MACH_U5500
+ select MACH_MOP500
+ help
+ At least one platform needs to be selected in order to build
+ a working kernel. If everything else is disabled, this
+ automatically enables MACH_MOP500.
endmenu
config UX500_DEBUG_UART
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 6bd2f451c18..465b9ec9510 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -7,7 +7,7 @@ obj-y := clock.o cpu.o devices.o devices-common.o \
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
-obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
+obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \
board-mop500-regulators.o \
board-mop500-uib.o board-mop500-stuib.o \
board-mop500-u8500uib.o \
@@ -15,7 +15,6 @@ obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o
obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 74bfcff2bdf..f5413dca532 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -6,6 +6,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/bug.h>
#include <asm/mach-types.h>
#include <plat/pincfg.h>
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 2735d03996c..52426a42578 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -74,6 +74,26 @@ static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
};
+static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
+ /* AB8500 audio-codec main supply */
+ REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
+ /* AB8500 audio-codec Mic1 supply */
+ REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
+ /* AB8500 audio-codec Mic2 supply */
+ REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
+ /* AB8500 audio-codec DMic supply */
+ REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
+};
+
static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
/* SoC core supply, no device */
REGULATOR_SUPPLY("v-intcore", NULL),
@@ -323,6 +343,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
.name = "V-AUD",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
+ .consumer_supplies = ab8500_vaud_consumers,
},
/* supply for v-anamic1 VAMic1-LDO */
[AB8500_LDO_ANAMIC1] = {
@@ -330,6 +352,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
.name = "V-AMIC1",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
+ .consumer_supplies = ab8500_vamic1_consumers,
},
/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
[AB8500_LDO_ANAMIC2] = {
@@ -337,6 +361,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
.name = "V-AMIC2",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
+ .consumer_supplies = ab8500_vamic2_consumers,
},
/* supply for v-dmic, VDMIC LDO */
[AB8500_LDO_DMIC] = {
@@ -344,6 +370,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
.name = "V-DMIC",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
+ .consumer_supplies = ab8500_vdmic_consumers,
},
/* supply for v-intcore12, VINTCORE12 LDO */
[AB8500_LDO_INTCORE] = {
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 5dde4d4ebe8..1daead3e583 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -31,21 +31,13 @@
* SDI 0 (MicroSD slot)
*/
-/* MMCIPOWER bits */
-#define MCI_DATA2DIREN (1 << 2)
-#define MCI_CMDDIREN (1 << 3)
-#define MCI_DATA0DIREN (1 << 4)
-#define MCI_DATA31DIREN (1 << 5)
-#define MCI_FBCLKEN (1 << 7)
-
/* GPIO pins used by the sdi0 level shifter */
static int sdi0_en = -1;
static int sdi0_vsel = -1;
-static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd,
- unsigned char power_mode)
+static int mop500_sdi0_ios_handler(struct device *dev, struct mmc_ios *ios)
{
- switch (power_mode) {
+ switch (ios->power_mode) {
case MMC_POWER_UP:
case MMC_POWER_ON:
/*
@@ -65,8 +57,7 @@ static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd,
break;
}
- return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN |
- MCI_DATA2DIREN | MCI_DATA31DIREN;
+ return 0;
}
#ifdef CONFIG_STE_DMA40
@@ -90,13 +81,17 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
#endif
static struct mmci_platform_data mop500_sdi0_data = {
- .vdd_handler = mop500_sdi0_vdd_handler,
+ .ios_handler = mop500_sdi0_ios_handler,
.ocr_mask = MMC_VDD_29_30,
.f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA |
MMC_CAP_SD_HIGHSPEED |
MMC_CAP_MMC_HIGHSPEED,
.gpio_wp = -1,
+ .sigdir = MCI_ST_FBCLKEN |
+ MCI_ST_CMDDIREN |
+ MCI_ST_DATA0DIREN |
+ MCI_ST_DATA2DIREN,
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &mop500_sdi0_dma_cfg_rx,
diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c
index feb5744d98b..ead91c968ff 100644
--- a/arch/arm/mach-ux500/board-mop500-u8500uib.c
+++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c
@@ -8,7 +8,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
-#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/mfd/tc3589x.h>
#include <linux/input/matrix_keypad.h>
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 5c00712907d..6d672a556df 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -72,7 +72,7 @@ static struct platform_device snowball_led_dev = {
};
static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
- .gpio_base = MOP500_AB8500_GPIO(0),
+ .gpio_base = MOP500_AB8500_PIN_GPIO(1),
.irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE,
/* config_reg is the initial configuration of ab8500 pins.
* The pins can be configured as GPIO or alt functions based
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index f926d3db620..7ff6cbffc10 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -63,7 +63,7 @@
* because the AB8500 GPIO pins are enumbered starting from 1, so the value in
* parens matches the GPIO pin number in the data sheet.
*/
-#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x) - 1)
+#define MOP500_AB8500_PIN_GPIO(x) (MOP500_EGPIO_END + (x) - 1)
/*Snowball AB8500 GPIO */
#define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */
#define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 73790753700..ec35f0aa566 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -223,6 +223,13 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
}
EXPORT_SYMBOL(clk_set_rate);
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ /*TODO*/
+ return -ENOSYS;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
static void clk_prcmu_enable(struct clk *clk)
{
void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
index 07449070522..d776ada08db 100644
--- a/arch/arm/mach-ux500/clock.h
+++ b/arch/arm/mach-ux500/clock.h
@@ -21,6 +21,7 @@ struct clkops {
void (*enable) (struct clk *);
void (*disable) (struct clk *);
unsigned long (*get_rate) (struct clk *);
+ int (*set_parent)(struct clk *, struct clk *);
};
/**
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index f4185749437..851308bf642 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -14,7 +14,6 @@
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
-#include <asm/localtimer.h>
#include <mach/hardware.h>
#include <mach/setup.h>
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index a7c6cdc9b11..6e66d3777ed 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -101,6 +101,9 @@ static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = {
[DB8500_DMA_DEV41_SD_MM3_TX] = -1,
[DB8500_DMA_DEV42_SD_MM4_TX] = -1,
[DB8500_DMA_DEV43_SD_MM5_TX] = -1,
+ [DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
+ [DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET,
+ [DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
};
/* Mapping between source event lines and physical device address */
@@ -133,6 +136,9 @@ static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = {
[DB8500_DMA_DEV41_SD_MM3_RX] = -1,
[DB8500_DMA_DEV42_SD_MM4_RX] = -1,
[DB8500_DMA_DEV43_SD_MM5_RX] = -1,
+ [DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
+ [DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET,
+ [DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
};
/* Reserved event lines for memcpy only */
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
deleted file mode 100644
index e16299e1020..00000000000
--- a/arch/arm/mach-ux500/include/mach/entry-macro.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Low-level IRQ helper macros for U8500 platforms
- *
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This file is a copy of ARM Realview platform.
- * -just satisfied checkpatch script.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index b6ba26a1367..d93d6dbef25 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -30,6 +30,8 @@
#include <mach/db8500-regs.h>
#include <mach/db5500-regs.h>
+#define MSP_TX_RX_REG_OFFSET 0
+
#ifndef __ASSEMBLY__
#include <mach/id.h>
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 9db68d264c5..c23a6b5f0c4 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -43,7 +43,7 @@
/* This will be overridden by board-specific irq headers */
#define IRQ_BOARD_END IRQ_BOARD_START
-#ifdef CONFIG_MACH_U8500
+#ifdef CONFIG_MACH_MOP500
#include <mach/irqs-board-mop500.h>
#endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index a7d363fdb4c..93d403955ea 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -27,9 +27,6 @@ extern void __init u5500_sdi_init(void);
extern void __init db5500_dma_init(void);
-/* We re-use nomadik_timer for this platform */
-extern void nmdk_timer_init(void);
-
struct amba_device;
extern void __init amba_add_devices(struct amba_device *devs[], int num);
diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c
deleted file mode 100644
index 5ba113309a0..00000000000
--- a/arch/arm/mach-ux500/localtimer.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2008-2009 ST-Ericsson
- * Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
- *
- * This file is heavily based on relaview platform, almost a copy.
- *
- * Copyright (C) 2002 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/clockchips.h>
-
-#include <asm/irq.h>
-#include <asm/smp_twd.h>
-#include <asm/localtimer.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
- evt->irq = IRQ_LOCALTIMER;
- twd_timer_setup(evt);
- return 0;
-}
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index aea467d04ff..e9d580702fb 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -8,28 +8,46 @@
#include <linux/errno.h>
#include <linux/clksrc-dbx500-prcmu.h>
-#include <asm/localtimer.h>
+#include <asm/smp_twd.h>
#include <plat/mtu.h>
#include <mach/setup.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+#ifdef CONFIG_HAVE_ARM_TWD
+static DEFINE_TWD_LOCAL_TIMER(u5500_twd_local_timer,
+ U5500_TWD_BASE, IRQ_LOCALTIMER);
+static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer,
+ U8500_TWD_BASE, IRQ_LOCALTIMER);
+
+static void __init ux500_twd_init(void)
+{
+ struct twd_local_timer *twd_local_timer;
+ int err;
+
+ twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer :
+ &u8500_twd_local_timer;
+
+ err = twd_local_timer_register(twd_local_timer);
+ if (err)
+ pr_err("twd_local_timer_register failed %d\n", err);
+}
+#else
+#define ux500_twd_init() do { } while(0)
+#endif
static void __init ux500_timer_init(void)
{
+ void __iomem *mtu_timer_base;
void __iomem *prcmu_timer_base;
if (cpu_is_u5500()) {
-#ifdef CONFIG_LOCAL_TIMERS
- twd_base = __io_address(U5500_TWD_BASE);
-#endif
- mtu_base = __io_address(U5500_MTU0_BASE);
+ mtu_timer_base = __io_address(U5500_MTU0_BASE);
prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
} else if (cpu_is_u8500()) {
-#ifdef CONFIG_LOCAL_TIMERS
- twd_base = __io_address(U8500_TWD_BASE);
-#endif
- mtu_base = __io_address(U8500_MTU0_BASE);
+ mtu_timer_base = __io_address(U8500_MTU0_BASE);
prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
} else {
ux500_unknown_soc();
@@ -52,8 +70,9 @@ static void __init ux500_timer_init(void)
*
*/
- nmdk_timer_init();
+ nmdk_timer_init(mtu_timer_base);
clksrc_dbx500_prcmu_init(prcmu_timer_base);
+ ux500_twd_init();
}
static void ux500_timer_reset(void)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-20 09:55:08 +0000