diff options
Diffstat (limited to 'arch/arm/mm/proc-arm1022.S')
| -rw-r--r-- | arch/arm/mm/proc-arm1022.S | 495 |
1 files changed, 495 insertions, 0 deletions
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S new file mode 100644 index 00000000000..747ed963e1d --- /dev/null +++ b/arch/arm/mm/proc-arm1022.S @@ -0,0 +1,495 @@ +/* + * linux/arch/arm/mm/proc-arm1022.S: MMU functions for ARM1022E + * + * Copyright (C) 2000 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * + * These are the low level assembler for performing cache and TLB + * functions on the ARM1022E. + */ +#include <linux/linkage.h> +#include <linux/config.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/constants.h> +#include <asm/pgtable.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> + +/* + * This is the maximum size of an area which will be invalidated + * using the single invalidate entry instructions. Anything larger + * than this, and we go for the whole cache. + * + * This value should be chosen such that we choose the cheapest + * alternative. + */ +#define MAX_AREA_SIZE 32768 + +/* + * The size of one data cache line. + */ +#define CACHE_DLINESIZE 32 + +/* + * The number of data cache segments. + */ +#define CACHE_DSEGMENTS 16 + +/* + * The number of lines in a cache segment. + */ +#define CACHE_DENTRIES 64 + +/* + * This is the size at which it becomes more efficient to + * clean the whole cache, rather than using the individual + * cache line maintainence instructions. + */ +#define CACHE_DLIMIT 32768 + + .text +/* + * cpu_arm1022_proc_init() + */ +ENTRY(cpu_arm1022_proc_init) + mov pc, lr + +/* + * cpu_arm1022_proc_fin() + */ +ENTRY(cpu_arm1022_proc_fin) + stmfd sp!, {lr} + mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, ip + bl arm1022_flush_kern_cache_all + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x1000 @ ...i............ + bic r0, r0, #0x000e @ ............wca. + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldmfd sp!, {pc} + +/* + * cpu_arm1022_reset(loc) + * + * Perform a soft reset of the system. Put the CPU into the + * same state as it would be if it had been reset, and branch + * to what would be the reset vector. + * + * loc: location to jump to for soft reset + */ + .align 5 +ENTRY(cpu_arm1022_reset) + mov ip, #0 + mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + mrc p15, 0, ip, c1, c0, 0 @ ctrl register + bic ip, ip, #0x000f @ ............wcam + bic ip, ip, #0x1100 @ ...i...s........ + mcr p15, 0, ip, c1, c0, 0 @ ctrl register + mov pc, r0 + +/* + * cpu_arm1022_do_idle() + */ + .align 5 +ENTRY(cpu_arm1022_do_idle) + mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt + mov pc, lr + +/* ================================= CACHE ================================ */ + + .align 5 +/* + * flush_user_cache_all() + * + * Invalidate all cache entries in a particular address + * space. + */ +ENTRY(arm1022_flush_user_cache_all) + /* FALLTHROUGH */ +/* + * flush_kern_cache_all() + * + * Clean and invalidate the entire cache. + */ +ENTRY(arm1022_flush_kern_cache_all) + mov r2, #VM_EXEC + mov ip, #0 +__flush_whole_cache: +#ifndef CONFIG_CPU_DCACHE_DISABLE + mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments +1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries +2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index + subs r3, r3, #1 << 26 + bcs 2b @ entries 63 to 0 + subs r1, r1, #1 << 5 + bcs 1b @ segments 15 to 0 +#endif + tst r2, #VM_EXEC +#ifndef CONFIG_CPU_ICACHE_DISABLE + mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache +#endif + mcrne p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * flush_user_cache_range(start, end, flags) + * + * Invalidate a range of cache entries in the specified + * address space. + * + * - start - start address (inclusive) + * - end - end address (exclusive) + * - flags - vm_flags for this space + */ +ENTRY(arm1022_flush_user_cache_range) + mov ip, #0 + sub r3, r1, r0 @ calculate total size + cmp r3, #CACHE_DLIMIT + bhs __flush_whole_cache + +#ifndef CONFIG_CPU_DCACHE_DISABLE +1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b +#endif + tst r2, #VM_EXEC +#ifndef CONFIG_CPU_ICACHE_DISABLE + mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache +#endif + mcrne p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm1022_coherent_kern_range) + /* FALLTHROUGH */ + +/* + * coherent_user_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm1022_coherent_user_range) + mov ip, #0 + bic r0, r0, #CACHE_DLINESIZE - 1 +1: +#ifndef CONFIG_CPU_DCACHE_DISABLE + mcr p15, 0, r0, c7, c10, 1 @ clean D entry +#endif +#ifndef CONFIG_CPU_ICACHE_DISABLE + mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry +#endif + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * flush_kern_dcache_page(void *page) + * + * Ensure no D cache aliasing occurs, either with itself or + * the I cache + * + * - page - page aligned address + */ +ENTRY(arm1022_flush_kern_dcache_page) + mov ip, #0 +#ifndef CONFIG_CPU_DCACHE_DISABLE + add r1, r0, #PAGE_SZ +1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b +#endif + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_inv_range(start, end) + * + * Invalidate (discard) the specified virtual address range. + * May not write back any entries. If 'start' or 'end' + * are not cache line aligned, those lines must be written + * back. + * + * - start - virtual start address + * - end - virtual end address + * + * (same as v4wb) + */ +ENTRY(arm1022_dma_inv_range) + mov ip, #0 +#ifndef CONFIG_CPU_DCACHE_DISABLE + tst r0, #CACHE_DLINESIZE - 1 + bic r0, r0, #CACHE_DLINESIZE - 1 + mcrne p15, 0, r0, c7, c10, 1 @ clean D entry + tst r1, #CACHE_DLINESIZE - 1 + mcrne p15, 0, r1, c7, c10, 1 @ clean D entry +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b +#endif + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_clean_range(start, end) + * + * Clean the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + * + * (same as v4wb) + */ +ENTRY(arm1022_dma_clean_range) + mov ip, #0 +#ifndef CONFIG_CPU_DCACHE_DISABLE + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b +#endif + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_flush_range(start, end) + * + * Clean and invalidate the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm1022_dma_flush_range) + mov ip, #0 +#ifndef CONFIG_CPU_DCACHE_DISABLE + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b +#endif + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +ENTRY(arm1022_cache_fns) + .long arm1022_flush_kern_cache_all + .long arm1022_flush_user_cache_all + .long arm1022_flush_user_cache_range + .long arm1022_coherent_kern_range + .long arm1022_coherent_user_range + .long arm1022_flush_kern_dcache_page + .long arm1022_dma_inv_range + .long arm1022_dma_clean_range + .long arm1022_dma_flush_range + + .align 5 +ENTRY(cpu_arm1022_dcache_clean_area) +#ifndef CONFIG_CPU_DCACHE_DISABLE + mov ip, #0 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + subs r1, r1, #CACHE_DLINESIZE + bhi 1b +#endif + mov pc, lr + +/* =============================== PageTable ============================== */ + +/* + * cpu_arm1022_switch_mm(pgd) + * + * Set the translation base pointer to be as described by pgd. + * + * pgd: new page tables + */ + .align 5 +ENTRY(cpu_arm1022_switch_mm) +#ifndef CONFIG_CPU_DCACHE_DISABLE + mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments +1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries +2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index + subs r3, r3, #1 << 26 + bcs 2b @ entries 63 to 0 + subs r1, r1, #1 << 5 + bcs 1b @ segments 15 to 0 +#endif + mov r1, #0 +#ifndef CONFIG_CPU_ICACHE_DISABLE + mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache +#endif + mcr p15, 0, r1, c7, c10, 4 @ drain WB + mcr p15, 0, r0, c2, c0, 0 @ load page table pointer + mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs + mov pc, lr + +/* + * cpu_arm1022_set_pte(ptep, pte) + * + * Set a PTE and flush it out + */ + .align 5 +ENTRY(cpu_arm1022_set_pte) + str r1, [r0], #-2048 @ linux version + + eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY + + bic r2, r1, #PTE_SMALL_AP_MASK + bic r2, r2, #PTE_TYPE_MASK + orr r2, r2, #PTE_TYPE_SMALL + + tst r1, #L_PTE_USER @ User? + orrne r2, r2, #PTE_SMALL_AP_URO_SRW + + tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? + orreq r2, r2, #PTE_SMALL_AP_UNO_SRW + + tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? + movne r2, #0 + +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + eor r3, r1, #0x0a @ C & small page? + tst r3, #0x0b + biceq r2, r2, #4 +#endif + str r2, [r0] @ hardware version + mov r0, r0 +#ifndef CONFIG_CPU_DCACHE_DISABLE + mcr p15, 0, r0, c7, c10, 1 @ clean D entry +#endif + mov pc, lr + + __INIT + + .type __arm1022_setup, #function +__arm1022_setup: + mov r0, #0 + mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 + mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 + mrc p15, 0, r0, c1, c0 @ get control register v4 + ldr r5, arm1022_cr1_clear + bic r0, r0, r5 + ldr r5, arm1022_cr1_set + orr r0, r0, r5 +#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN + orr r0, r0, #0x4000 @ .R.............. +#endif + mov pc, lr + .size __arm1022_setup, . - __arm1022_setup + + /* + * R + * .RVI ZFRS BLDP WCAM + * .011 1001 ..11 0101 + * + */ + .type arm1022_cr1_clear, #object + .type arm1022_cr1_set, #object +arm1022_cr1_clear: + .word 0x7f3f +arm1022_cr1_set: + .word 0x3935 + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type arm1022_processor_functions, #object +arm1022_processor_functions: + .word v4t_early_abort + .word cpu_arm1022_proc_init + .word cpu_arm1022_proc_fin + .word cpu_arm1022_reset + .word cpu_arm1022_do_idle + .word cpu_arm1022_dcache_clean_area + .word cpu_arm1022_switch_mm + .word cpu_arm1022_set_pte + .size arm1022_processor_functions, . - arm1022_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv5te" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v5" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_arm1022_name, #object +cpu_arm1022_name: + .ascii "arm1022" +#ifndef CONFIG_CPU_ICACHE_DISABLE + .ascii "i" +#endif +#ifndef CONFIG_CPU_DCACHE_DISABLE + .ascii "d" +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + .ascii "(wt)" +#else + .ascii "(wb)" +#endif +#endif +#ifndef CONFIG_CPU_BPREDICT_DISABLE + .ascii "B" +#endif +#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN + .ascii "RR" +#endif + .ascii "\0" + .size cpu_arm1022_name, . - cpu_arm1022_name + + .align + + .section ".proc.info", #alloc, #execinstr + + .type __arm1022_proc_info,#object +__arm1022_proc_info: + .long 0x4105a220 @ ARM 1022E (v5TE) + .long 0xff0ffff0 + .long PMD_TYPE_SECT | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __arm1022_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP + .long cpu_arm1022_name + .long arm1022_processor_functions + .long v4wbi_tlb_fns + .long v4wb_user_fns + .long arm1022_cache_fns + .size __arm1022_proc_info, . - __arm1022_proc_info |