summaryrefslogtreecommitdiffstats
path: root/arch/arm/mm/proc-arm1022.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mm/proc-arm1022.S')
-rw-r--r--arch/arm/mm/proc-arm1022.S495
1 files changed, 495 insertions, 0 deletions
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
new file mode 100644
index 00000000000..747ed963e1d
--- /dev/null
+++ b/arch/arm/mm/proc-arm1022.S
@@ -0,0 +1,495 @@
+/*
+ * linux/arch/arm/mm/proc-arm1022.S: MMU functions for ARM1022E
+ *
+ * Copyright (C) 2000 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the ARM1022E.
+ */
+#include <linux/linkage.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+
+/*
+ * This is the maximum size of an area which will be invalidated
+ * using the single invalidate entry instructions. Anything larger
+ * than this, and we go for the whole cache.
+ *
+ * This value should be chosen such that we choose the cheapest
+ * alternative.
+ */
+#define MAX_AREA_SIZE 32768
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE 32
+
+/*
+ * The number of data cache segments.
+ */
+#define CACHE_DSEGMENTS 16
+
+/*
+ * The number of lines in a cache segment.
+ */
+#define CACHE_DENTRIES 64
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintainence instructions.
+ */
+#define CACHE_DLIMIT 32768
+
+ .text
+/*
+ * cpu_arm1022_proc_init()
+ */
+ENTRY(cpu_arm1022_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_arm1022_proc_fin()
+ */
+ENTRY(cpu_arm1022_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl arm1022_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_arm1022_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_arm1022_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_arm1022_do_idle()
+ */
+ .align 5
+ENTRY(cpu_arm1022_do_idle)
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mov pc, lr
+
+/* ================================= CACHE ================================ */
+
+ .align 5
+/*
+ * flush_user_cache_all()
+ *
+ * Invalidate all cache entries in a particular address
+ * space.
+ */
+ENTRY(arm1022_flush_user_cache_all)
+ /* FALLTHROUGH */
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(arm1022_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 15 to 0
+#endif
+ tst r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+#endif
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags for this space
+ */
+ENTRY(arm1022_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bhs __flush_whole_cache
+
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ tst r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+#endif
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1022_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1022_coherent_user_range)
+ mov ip, #0
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+#endif
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - page - page aligned address
+ */
+ENTRY(arm1022_flush_kern_dcache_page)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm1022_dma_inv_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ tst r0, #CACHE_DLINESIZE - 1
+ bic r0, r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm1022_dma_clean_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1022_dma_flush_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(arm1022_cache_fns)
+ .long arm1022_flush_kern_cache_all
+ .long arm1022_flush_user_cache_all
+ .long arm1022_flush_user_cache_range
+ .long arm1022_coherent_kern_range
+ .long arm1022_coherent_user_range
+ .long arm1022_flush_kern_dcache_page
+ .long arm1022_dma_inv_range
+ .long arm1022_dma_clean_range
+ .long arm1022_dma_flush_range
+
+ .align 5
+ENTRY(cpu_arm1022_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mov ip, #0
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+#endif
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_arm1022_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_arm1022_switch_mm)
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 15 to 0
+#endif
+ mov r1, #0
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
+#endif
+ mcr p15, 0, r1, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, lr
+
+/*
+ * cpu_arm1022_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_arm1022_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ eor r3, r1, #0x0a @ C & small page?
+ tst r3, #0x0b
+ biceq r2, r2, #4
+#endif
+ str r2, [r0] @ hardware version
+ mov r0, r0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+ mov pc, lr
+
+ __INIT
+
+ .type __arm1022_setup, #function
+__arm1022_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ ldr r5, arm1022_cr1_clear
+ bic r0, r0, r5
+ ldr r5, arm1022_cr1_set
+ orr r0, r0, r5
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ orr r0, r0, #0x4000 @ .R..............
+#endif
+ mov pc, lr
+ .size __arm1022_setup, . - __arm1022_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * .011 1001 ..11 0101
+ *
+ */
+ .type arm1022_cr1_clear, #object
+ .type arm1022_cr1_set, #object
+arm1022_cr1_clear:
+ .word 0x7f3f
+arm1022_cr1_set:
+ .word 0x3935
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm1022_processor_functions, #object
+arm1022_processor_functions:
+ .word v4t_early_abort
+ .word cpu_arm1022_proc_init
+ .word cpu_arm1022_proc_fin
+ .word cpu_arm1022_reset
+ .word cpu_arm1022_do_idle
+ .word cpu_arm1022_dcache_clean_area
+ .word cpu_arm1022_switch_mm
+ .word cpu_arm1022_set_pte
+ .size arm1022_processor_functions, . - arm1022_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv5te"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v5"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm1022_name, #object
+cpu_arm1022_name:
+ .ascii "arm1022"
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ .ascii "i"
+#endif
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ .ascii "d"
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ .ascii "(wt)"
+#else
+ .ascii "(wb)"
+#endif
+#endif
+#ifndef CONFIG_CPU_BPREDICT_DISABLE
+ .ascii "B"
+#endif
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ .ascii "RR"
+#endif
+ .ascii "\0"
+ .size cpu_arm1022_name, . - cpu_arm1022_name
+
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __arm1022_proc_info,#object
+__arm1022_proc_info:
+ .long 0x4105a220 @ ARM 1022E (v5TE)
+ .long 0xff0ffff0
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __arm1022_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP
+ .long cpu_arm1022_name
+ .long arm1022_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long arm1022_cache_fns
+ .size __arm1022_proc_info, . - __arm1022_proc_info