summaryrefslogtreecommitdiffstats
path: root/arch/arm/mm/proc-xscale.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mm/proc-xscale.S')
-rw-r--r--arch/arm/mm/proc-xscale.S934
1 files changed, 934 insertions, 0 deletions
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
new file mode 100644
index 00000000000..2d977b4eeea
--- /dev/null
+++ b/arch/arm/mm/proc-xscale.S
@@ -0,0 +1,934 @@
+/*
+ * linux/arch/arm/mm/proc-xscale.S
+ *
+ * Author: Nicolas Pitre
+ * Created: November 2000
+ * Copyright: (C) 2000, 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * MMU functions for the Intel XScale CPUs
+ *
+ * 2001 Aug 21:
+ * some contributions by Brett Gaines <brett.w.gaines@intel.com>
+ * Copyright 2001 by Intel Corp.
+ *
+ * 2001 Sep 08:
+ * Completely revisited, many important fixes
+ * Nicolas Pitre <nico@cam.org>
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/procinfo.h>
+#include <asm/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be flushed. If the area
+ * is larger than this, then we flush the whole cache
+ */
+#define MAX_AREA_SIZE 32768
+
+/*
+ * the cache line size of the I and D cache
+ */
+#define CACHELINESIZE 32
+
+/*
+ * the size of the data cache
+ */
+#define CACHESIZE 32768
+
+/*
+ * Virtual address used to allocate the cache when flushed
+ *
+ * This must be an address range which is _never_ used. It should
+ * apparently have a mapping in the corresponding page table for
+ * compatibility with future CPUs that _could_ require it. For instance we
+ * don't care.
+ *
+ * This must be aligned on a 2*CACHESIZE boundary. The code selects one of
+ * the 2 areas in alternance each time the clean_d_cache macro is used.
+ * Without this the XScale core exhibits cache eviction problems and no one
+ * knows why.
+ *
+ * Reminder: the vector table is located at 0xffff0000-0xffff0fff.
+ */
+#define CLEAN_ADDR 0xfffe0000
+
+/*
+ * This macro is used to wait for a CP15 write and is needed
+ * when we have to ensure that the last operation to the co-pro
+ * was completed before continuing with operation.
+ */
+ .macro cpwait, rd
+ mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15
+ mov \rd, \rd @ wait for completion
+ sub pc, pc, #4 @ flush instruction pipeline
+ .endm
+
+ .macro cpwait_ret, lr, rd
+ mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15
+ sub pc, \lr, \rd, LSR #32 @ wait for completion and
+ @ flush instruction pipeline
+ .endm
+
+/*
+ * This macro cleans the entire dcache using line allocate.
+ * The main loop has been unrolled to reduce loop overhead.
+ * rd and rs are two scratch registers.
+ */
+ .macro clean_d_cache, rd, rs
+ ldr \rs, =clean_addr
+ ldr \rd, [\rs]
+ eor \rd, \rd, #CACHESIZE
+ str \rd, [\rs]
+ add \rs, \rd, #CACHESIZE
+1: mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
+ add \rd, \rd, #CACHELINESIZE
+ mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
+ add \rd, \rd, #CACHELINESIZE
+ mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
+ add \rd, \rd, #CACHELINESIZE
+ mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
+ add \rd, \rd, #CACHELINESIZE
+ teq \rd, \rs
+ bne 1b
+ .endm
+
+ .data
+clean_addr: .word CLEAN_ADDR
+
+ .text
+
+/*
+ * cpu_xscale_proc_init()
+ *
+ * Nothing too exciting at the moment
+ */
+ENTRY(cpu_xscale_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_xscale_proc_fin()
+ */
+ENTRY(cpu_xscale_proc_fin)
+ str lr, [sp, #-4]!
+ mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
+ msr cpsr_c, r0
+ bl xscale_flush_kern_cache_all @ clean caches
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1800 @ ...IZ...........
+ bic r0, r0, #0x0006 @ .............CA.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldr pc, [sp], #4
+
+/*
+ * cpu_xscale_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_xscale_reset)
+ mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
+ msr cpsr_c, r1 @ reset CPSR
+ mrc p15, 0, r1, c1, c0, 0 @ ctrl register
+ bic r1, r1, #0x0086 @ ........B....CA.
+ bic r1, r1, #0x3900 @ ..VIZ..S........
+ mcr p15, 0, r1, c1, c0, 0 @ ctrl register
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB
+ bic r1, r1, #0x0001 @ ...............M
+ mcr p15, 0, r1, c1, c0, 0 @ ctrl register
+ @ CAUTION: MMU turned off from this point. We count on the pipeline
+ @ already containing those two last instructions to survive.
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, r0
+
+/*
+ * cpu_xscale_do_idle()
+ *
+ * Cause the processor to idle
+ *
+ * For now we do nothing but go to idle mode for every case
+ *
+ * XScale supports clock switching, but using idle mode support
+ * allows external hardware to react to system state changes.
+ */
+ .align 5
+
+ENTRY(cpu_xscale_do_idle)
+ mov r0, #1
+ mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE
+ mov pc, lr
+
+/* ================================= CACHE ================================ */
+
+/*
+ * flush_user_cache_all()
+ *
+ * Invalidate all cache entries in a particular address
+ * space.
+ */
+ENTRY(xscale_flush_user_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(xscale_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+ clean_d_cache r0, r1
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
+ mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, vm_flags)
+ *
+ * Invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ * - vma - vma_area_struct describing address space
+ */
+ .align 5
+ENTRY(xscale_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #MAX_AREA_SIZE
+ bhs __flush_whole_cache
+
+1: tst r2, #VM_EXEC
+ mcrne p15, 0, r0, c7, c5, 1 @ Invalidate I cache line
+ mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line
+ mcr p15, 0, r0, c7, c6, 1 @ Invalidate D cache line
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB
+ mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * Note: single I-cache line invalidation isn't used here since
+ * it also trashes the mini I-cache used by JTAG debuggers.
+ */
+ENTRY(xscale_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * Note: single I-cache line invalidation isn't used here since
+ * it also trashes the mini I-cache used by JTAG debuggers.
+ */
+ENTRY(xscale_coherent_user_range)
+ bic r0, r0, #CACHELINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(xscale_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(xscale_dma_inv_range)
+ mrc p15, 0, r2, c0, c0, 0 @ read ID
+ eor r2, r2, #0x69000000
+ eor r2, r2, #0x00052000
+ bics r2, r2, #1
+ beq xscale_dma_flush_range
+
+ tst r0, #CACHELINESIZE - 1
+ bic r0, r0, #CACHELINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHELINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(xscale_dma_clean_range)
+ bic r0, r0, #CACHELINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(xscale_dma_flush_range)
+ bic r0, r0, #CACHELINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+ENTRY(xscale_cache_fns)
+ .long xscale_flush_kern_cache_all
+ .long xscale_flush_user_cache_all
+ .long xscale_flush_user_cache_range
+ .long xscale_coherent_kern_range
+ .long xscale_coherent_user_range
+ .long xscale_flush_kern_dcache_page
+ .long xscale_dma_inv_range
+ .long xscale_dma_clean_range
+ .long xscale_dma_flush_range
+
+ENTRY(cpu_xscale_dcache_clean_area)
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHELINESIZE
+ subs r1, r1, #CACHELINESIZE
+ bhi 1b
+ mov pc, lr
+
+/* ================================ CACHE LOCKING============================
+ *
+ * The XScale MicroArchitecture implements support for locking entries into
+ * the data and instruction cache. The following functions implement the core
+ * low level instructions needed to accomplish the locking. The developer's
+ * manual states that the code that performs the locking must be in non-cached
+ * memory. To accomplish this, the code in xscale-cache-lock.c copies the
+ * following functions from the cache into a non-cached memory region that
+ * is allocated through consistent_alloc().
+ *
+ */
+ .align 5
+/*
+ * xscale_icache_lock
+ *
+ * r0: starting address to lock
+ * r1: end address to lock
+ */
+ENTRY(xscale_icache_lock)
+
+iLockLoop:
+ bic r0, r0, #CACHELINESIZE - 1
+ mcr p15, 0, r0, c9, c1, 0 @ lock into cache
+ cmp r0, r1 @ are we done?
+ add r0, r0, #CACHELINESIZE @ advance to next cache line
+ bls iLockLoop
+ mov pc, lr
+
+/*
+ * xscale_icache_unlock
+ */
+ENTRY(xscale_icache_unlock)
+ mcr p15, 0, r0, c9, c1, 1 @ Unlock icache
+ mov pc, lr
+
+/*
+ * xscale_dcache_lock
+ *
+ * r0: starting address to lock
+ * r1: end address to lock
+ */
+ENTRY(xscale_dcache_lock)
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov r2, #1
+ mcr p15, 0, r2, c9, c2, 0 @ Put dcache in lock mode
+ cpwait ip @ Wait for completion
+
+ mrs r2, cpsr
+ orr r3, r2, #PSR_F_BIT | PSR_I_BIT
+dLockLoop:
+ msr cpsr_c, r3
+ mcr p15, 0, r0, c7, c10, 1 @ Write back line if it is dirty
+ mcr p15, 0, r0, c7, c6, 1 @ Flush/invalidate line
+ msr cpsr_c, r2
+ ldr ip, [r0], #CACHELINESIZE @ Preload 32 bytes into cache from
+ @ location [r0]. Post-increment
+ @ r3 to next cache line
+ cmp r0, r1 @ Are we done?
+ bls dLockLoop
+
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov r2, #0
+ mcr p15, 0, r2, c9, c2, 0 @ Get out of lock mode
+ cpwait_ret lr, ip
+
+/*
+ * xscale_dcache_unlock
+ */
+ENTRY(xscale_dcache_unlock)
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mcr p15, 0, ip, c9, c2, 1 @ Unlock cache
+ mov pc, lr
+
+/*
+ * Needed to determine the length of the code that needs to be copied.
+ */
+ .align 5
+ENTRY(xscale_cache_dummy)
+ mov pc, lr
+
+/* ================================ TLB LOCKING==============================
+ *
+ * The XScale MicroArchitecture implements support for locking entries into
+ * the Instruction and Data TLBs. The following functions provide the
+ * low level support for supporting these under Linux. xscale-lock.c
+ * implements some higher level management code. Most of the following
+ * is taken straight out of the Developer's Manual.
+ */
+
+/*
+ * Lock I-TLB entry
+ *
+ * r0: Virtual address to translate and lock
+ */
+ .align 5
+ENTRY(xscale_itlb_lock)
+ mrs r2, cpsr
+ orr r3, r2, #PSR_F_BIT | PSR_I_BIT
+ msr cpsr_c, r3 @ Disable interrupts
+ mcr p15, 0, r0, c8, c5, 1 @ Invalidate I-TLB entry
+ mcr p15, 0, r0, c10, c4, 0 @ Translate and lock
+ msr cpsr_c, r2 @ Restore interrupts
+ cpwait_ret lr, ip
+
+/*
+ * Lock D-TLB entry
+ *
+ * r0: Virtual address to translate and lock
+ */
+ .align 5
+ENTRY(xscale_dtlb_lock)
+ mrs r2, cpsr
+ orr r3, r2, #PSR_F_BIT | PSR_I_BIT
+ msr cpsr_c, r3 @ Disable interrupts
+ mcr p15, 0, r0, c8, c6, 1 @ Invalidate D-TLB entry
+ mcr p15, 0, r0, c10, c8, 0 @ Translate and lock
+ msr cpsr_c, r2 @ Restore interrupts
+ cpwait_ret lr, ip
+
+/*
+ * Unlock all I-TLB entries
+ */
+ .align 5
+ENTRY(xscale_itlb_unlock)
+ mcr p15, 0, ip, c10, c4, 1 @ Unlock I-TLB
+ mcr p15, 0, ip, c8, c5, 0 @ Invalidate I-TLB
+ cpwait_ret lr, ip
+
+/*
+ * Unlock all D-TLB entries
+ */
+ENTRY(xscale_dtlb_unlock)
+ mcr p15, 0, ip, c10, c8, 1 @ Unlock D-TBL
+ mcr p15, 0, ip, c8, c6, 0 @ Invalidate D-TLB
+ cpwait_ret lr, ip
+
+/* =============================== PageTable ============================== */
+
+#define PTE_CACHE_WRITE_ALLOCATE 0
+
+/*
+ * cpu_xscale_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_xscale_switch_mm)
+ clean_d_cache r1, r2
+ mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ cpwait_ret lr, ip
+
+/*
+ * cpu_xscale_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ *
+ * Errata 40: must set memory to write-through for user read-only pages.
+ */
+ .align 5
+ENTRY(cpu_xscale_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ bic r2, r1, #0xff0
+ orr r2, r2, #PTE_TYPE_EXT @ extended page
+
+ eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ tst r3, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w
+
+ tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w
+ @ combined with user -> user r/w
+
+ @
+ @ Handle the X bit. We want to set this bit for the minicache
+ @ (U = E = B = W = 0, C = 1) or when write allocate is enabled,
+ @ and we have a writeable, cacheable region. If we ignore the
+ @ U and E bits, we can allow user space to use the minicache as
+ @ well.
+ @
+ @ X = (C & ~W & ~B) | (C & W & B & write_allocate)
+ @
+ eor ip, r1, #L_PTE_CACHEABLE
+ tst ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
+#if PTE_CACHE_WRITE_ALLOCATE
+ eorne ip, r1, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
+ tstne ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
+#endif
+ orreq r2, r2, #PTE_EXT_TEX(1)
+
+ @
+ @ Erratum 40: The B bit must be cleared for a user read-only
+ @ cacheable page.
+ @
+ @ B = B & ~(U & C & ~W)
+ @
+ and ip, r1, #L_PTE_USER | L_PTE_WRITE | L_PTE_CACHEABLE
+ teq ip, #L_PTE_USER | L_PTE_CACHEABLE
+ biceq r2, r2, #PTE_BUFFERABLE
+
+ tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0 @ no -> fault
+
+ str r2, [r0] @ hardware version
+ mov ip, #0
+ mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+
+ .ltorg
+
+ .align
+
+ __INIT
+
+ .type __xscale_setup, #function
+__xscale_setup:
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs
+#ifdef CONFIG_IWMMXT
+ mov r0, #0 @ initially disallow access to CP0/CP1
+#else
+ mov r0, #1 @ Allow access to CP0
+#endif
+ orr r0, r0, #1 << 6 @ cp6 for IOP3xx and Bulverde
+ orr r0, r0, #1 << 13 @ Its undefined whether this
+ mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes
+ mrc p15, 0, r0, c1, c0, 0 @ get control register
+ ldr r5, xscale_cr1_clear
+ bic r0, r0, r5
+ ldr r5, xscale_cr1_set
+ orr r0, r0, r5
+ mov pc, lr
+ .size __xscale_setup, . - __xscale_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * ..11 1.01 .... .101
+ *
+ */
+ .type xscale_cr1_clear, #object
+ .type xscale_cr1_set, #object
+xscale_cr1_clear:
+ .word 0x3b07
+xscale_cr1_set:
+ .word 0x3905
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+
+ .type xscale_processor_functions, #object
+ENTRY(xscale_processor_functions)
+ .word v5t_early_abort
+ .word cpu_xscale_proc_init
+ .word cpu_xscale_proc_fin
+ .word cpu_xscale_reset
+ .word cpu_xscale_do_idle
+ .word cpu_xscale_dcache_clean_area
+ .word cpu_xscale_switch_mm
+ .word cpu_xscale_set_pte
+ .size xscale_processor_functions, . - xscale_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv5te"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v5"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_80200_name, #object
+cpu_80200_name:
+ .asciz "XScale-80200"
+ .size cpu_80200_name, . - cpu_80200_name
+
+ .type cpu_8032x_name, #object
+cpu_8032x_name:
+ .asciz "XScale-IOP8032x Family"
+ .size cpu_8032x_name, . - cpu_8032x_name
+
+ .type cpu_8033x_name, #object
+cpu_8033x_name:
+ .asciz "XScale-IOP8033x Family"
+ .size cpu_8033x_name, . - cpu_8033x_name
+
+ .type cpu_pxa250_name, #object
+cpu_pxa250_name:
+ .asciz "XScale-PXA250"
+ .size cpu_pxa250_name, . - cpu_pxa250_name
+
+ .type cpu_pxa210_name, #object
+cpu_pxa210_name:
+ .asciz "XScale-PXA210"
+ .size cpu_pxa210_name, . - cpu_pxa210_name
+
+ .type cpu_ixp42x_name, #object
+cpu_ixp42x_name:
+ .asciz "XScale-IXP42x Family"
+ .size cpu_ixp42x_name, . - cpu_ixp42x_name
+
+ .type cpu_ixp46x_name, #object
+cpu_ixp46x_name:
+ .asciz "XScale-IXP46x Family"
+ .size cpu_ixp46x_name, . - cpu_ixp46x_name
+
+ .type cpu_ixp2400_name, #object
+cpu_ixp2400_name:
+ .asciz "XScale-IXP2400"
+ .size cpu_ixp2400_name, . - cpu_ixp2400_name
+
+ .type cpu_ixp2800_name, #object
+cpu_ixp2800_name:
+ .asciz "XScale-IXP2800"
+ .size cpu_ixp2800_name, . - cpu_ixp2800_name
+
+ .type cpu_pxa255_name, #object
+cpu_pxa255_name:
+ .asciz "XScale-PXA255"
+ .size cpu_pxa255_name, . - cpu_pxa255_name
+
+ .type cpu_pxa270_name, #object
+cpu_pxa270_name:
+ .asciz "XScale-PXA270"
+ .size cpu_pxa270_name, . - cpu_pxa270_name
+
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __80200_proc_info,#object
+__80200_proc_info:
+ .long 0x69052000
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_80200_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __80200_proc_info, . - __80200_proc_info
+
+ .type __8032x_proc_info,#object
+__8032x_proc_info:
+ .long 0x69052420
+ .long 0xfffff5e0 @ mask should accomodate IOP80219 also
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_8032x_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __8032x_proc_info, . - __8032x_proc_info
+
+ .type __8033x_proc_info,#object
+__8033x_proc_info:
+ .long 0x69054010
+ .long 0xffffff30
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_8033x_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __8033x_proc_info, . - __8033x_proc_info
+
+ .type __pxa250_proc_info,#object
+__pxa250_proc_info:
+ .long 0x69052100
+ .long 0xfffff7f0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_pxa250_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __pxa250_proc_info, . - __pxa250_proc_info
+
+ .type __pxa210_proc_info,#object
+__pxa210_proc_info:
+ .long 0x69052120
+ .long 0xfffff3f0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_pxa210_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __pxa210_proc_info, . - __pxa210_proc_info
+
+ .type __ixp2400_proc_info, #object
+__ixp2400_proc_info:
+ .long 0x69054190
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_ixp2400_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __ixp2400_proc_info, . - __ixp2400_proc_info
+
+ .type __ixp2800_proc_info, #object
+__ixp2800_proc_info:
+ .long 0x690541a0
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_ixp2800_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __ixp2800_proc_info, . - __ixp2800_proc_info
+
+ .type __ixp42x_proc_info, #object
+__ixp42x_proc_info:
+ .long 0x690541c0
+ .long 0xffffffc0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_ixp42x_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __ixp42x_proc_info, . - __ixp42x_proc_info
+
+ .type __ixp46x_proc_info, #object
+__ixp46x_proc_info:
+ .long 0x69054200
+ .long 0xffffff00
+ .long 0x00000c0e
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_ixp46x_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __ixp46x_proc_info, . - __ixp46x_proc_info
+
+ .type __pxa255_proc_info,#object
+__pxa255_proc_info:
+ .long 0x69052d00
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_pxa255_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __pxa255_proc_info, . - __pxa255_proc_info
+
+ .type __pxa270_proc_info,#object
+__pxa270_proc_info:
+ .long 0x69054110
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_pxa270_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __pxa270_proc_info, . - __pxa270_proc_info
+