summaryrefslogtreecommitdiffstats
path: root/arch/arm/mm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mm')
-rw-r--r--arch/arm/mm/init.c72
-rw-r--r--arch/arm/mm/mmu.c117
-rw-r--r--arch/arm/mm/nommu.c66
3 files changed, 99 insertions, 156 deletions
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 2a77ba8796a..c8ab21dc217 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -81,24 +81,21 @@ __tagtable(ATAG_INITRD2, parse_tag_initrd2);
* initialization functions, as well as show_mem() for the skipping
* of holes in the memory map. It is populated by arm_add_memory().
*/
-struct meminfo meminfo;
-
void show_mem(unsigned int filter)
{
int free = 0, total = 0, reserved = 0;
- int shared = 0, cached = 0, slab = 0, i;
- struct meminfo * mi = &meminfo;
+ int shared = 0, cached = 0, slab = 0;
+ struct memblock_region *reg;
printk("Mem-info:\n");
show_free_areas(filter);
- for_each_bank (i, mi) {
- struct membank *bank = &mi->bank[i];
+ for_each_memblock (memory, reg) {
unsigned int pfn1, pfn2;
struct page *page, *end;
- pfn1 = bank_pfn_start(bank);
- pfn2 = bank_pfn_end(bank);
+ pfn1 = memblock_region_memory_base_pfn(reg);
+ pfn2 = memblock_region_memory_end_pfn(reg);
page = pfn_to_page(pfn1);
end = pfn_to_page(pfn2 - 1) + 1;
@@ -115,8 +112,9 @@ void show_mem(unsigned int filter)
free++;
else
shared += page_count(page) - 1;
- page++;
- } while (page < end);
+ pfn1++;
+ page = pfn_to_page(pfn1);
+ } while (pfn1 < pfn2);
}
printk("%d pages of RAM\n", total);
@@ -130,16 +128,9 @@ void show_mem(unsigned int filter)
static void __init find_limits(unsigned long *min, unsigned long *max_low,
unsigned long *max_high)
{
- struct meminfo *mi = &meminfo;
- int i;
-
- /* This assumes the meminfo array is properly sorted */
- *min = bank_pfn_start(&mi->bank[0]);
- for_each_bank (i, mi)
- if (mi->bank[i].highmem)
- break;
- *max_low = bank_pfn_end(&mi->bank[i - 1]);
- *max_high = bank_pfn_end(&mi->bank[mi->nr_banks - 1]);
+ *max_low = PFN_DOWN(memblock_get_current_limit());
+ *min = PFN_UP(memblock_start_of_DRAM());
+ *max_high = PFN_DOWN(memblock_end_of_DRAM());
}
#ifdef CONFIG_ZONE_DMA
@@ -274,14 +265,8 @@ phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align)
return phys;
}
-void __init arm_memblock_init(struct meminfo *mi,
- const struct machine_desc *mdesc)
+void __init arm_memblock_init(const struct machine_desc *mdesc)
{
- int i;
-
- for (i = 0; i < mi->nr_banks; i++)
- memblock_add(mi->bank[i].start, mi->bank[i].size);
-
/* Register the kernel text, kernel data and initrd with memblock. */
#ifdef CONFIG_XIP_KERNEL
memblock_reserve(__pa(_sdata), _end - _sdata);
@@ -413,54 +398,53 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn)
/*
* The mem_map array can get very big. Free the unused area of the memory map.
*/
-static void __init free_unused_memmap(struct meminfo *mi)
+static void __init free_unused_memmap(void)
{
- unsigned long bank_start, prev_bank_end = 0;
- unsigned int i;
+ unsigned long start, prev_end = 0;
+ struct memblock_region *reg;
/*
* This relies on each bank being in address order.
* The banks are sorted previously in bootmem_init().
*/
- for_each_bank(i, mi) {
- struct membank *bank = &mi->bank[i];
-
- bank_start = bank_pfn_start(bank);
+ for_each_memblock(memory, reg) {
+ start = memblock_region_memory_base_pfn(reg);
#ifdef CONFIG_SPARSEMEM
/*
* Take care not to free memmap entries that don't exist
* due to SPARSEMEM sections which aren't present.
*/
- bank_start = min(bank_start,
- ALIGN(prev_bank_end, PAGES_PER_SECTION));
+ start = min(start,
+ ALIGN(prev_end, PAGES_PER_SECTION));
#else
/*
* Align down here since the VM subsystem insists that the
* memmap entries are valid from the bank start aligned to
* MAX_ORDER_NR_PAGES.
*/
- bank_start = round_down(bank_start, MAX_ORDER_NR_PAGES);
+ start = round_down(start, MAX_ORDER_NR_PAGES);
#endif
/*
* If we had a previous bank, and there is a space
* between the current bank and the previous, free it.
*/
- if (prev_bank_end && prev_bank_end < bank_start)
- free_memmap(prev_bank_end, bank_start);
+ if (prev_end && prev_end < start)
+ free_memmap(prev_end, start);
/*
* Align up here since the VM subsystem insists that the
* memmap entries are valid from the bank end aligned to
* MAX_ORDER_NR_PAGES.
*/
- prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
+ prev_end = ALIGN(memblock_region_memory_end_pfn(reg),
+ MAX_ORDER_NR_PAGES);
}
#ifdef CONFIG_SPARSEMEM
- if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION))
- free_memmap(prev_bank_end,
- ALIGN(prev_bank_end, PAGES_PER_SECTION));
+ if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION))
+ free_memmap(prev_end,
+ ALIGN(prev_end, PAGES_PER_SECTION));
#endif
}
@@ -536,7 +520,7 @@ void __init mem_init(void)
set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
/* this will put all unused low memory onto the freelists */
- free_unused_memmap(&meminfo);
+ free_unused_memmap();
free_all_bootmem();
#ifdef CONFIG_SA1111
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index a991ce2f18d..82ea2b3fb9b 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1062,74 +1062,47 @@ phys_addr_t arm_lowmem_limit __initdata = 0;
void __init sanity_check_meminfo(void)
{
phys_addr_t memblock_limit = 0;
- int i, j, highmem = 0;
+ int highmem = 0;
phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1;
+ struct memblock_region *reg;
- for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
- struct membank *bank = &meminfo.bank[j];
- phys_addr_t size_limit;
-
- *bank = meminfo.bank[i];
- size_limit = bank->size;
+ for_each_memblock(memory, reg) {
+ phys_addr_t block_start = reg->base;
+ phys_addr_t block_end = reg->base + reg->size;
+ phys_addr_t size_limit = reg->size;
- if (bank->start >= vmalloc_limit)
+ if (reg->base >= vmalloc_limit)
highmem = 1;
else
- size_limit = vmalloc_limit - bank->start;
+ size_limit = vmalloc_limit - reg->base;
- bank->highmem = highmem;
-#ifdef CONFIG_HIGHMEM
- /*
- * Split those memory banks which are partially overlapping
- * the vmalloc area greatly simplifying things later.
- */
- if (!highmem && bank->size > size_limit) {
- if (meminfo.nr_banks >= NR_BANKS) {
- printk(KERN_CRIT "NR_BANKS too low, "
- "ignoring high memory\n");
- } else {
- memmove(bank + 1, bank,
- (meminfo.nr_banks - i) * sizeof(*bank));
- meminfo.nr_banks++;
- i++;
- bank[1].size -= size_limit;
- bank[1].start = vmalloc_limit;
- bank[1].highmem = highmem = 1;
- j++;
+ if (!IS_ENABLED(CONFIG_HIGHMEM) || cache_is_vipt_aliasing()) {
+
+ if (highmem) {
+ pr_notice("Ignoring RAM at %pa-%pa (!CONFIG_HIGHMEM)\n",
+ &block_start, &block_end);
+ memblock_remove(reg->base, reg->size);
+ continue;
}
- bank->size = size_limit;
- }
-#else
- /*
- * Highmem banks not allowed with !CONFIG_HIGHMEM.
- */
- if (highmem) {
- printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
- "(!CONFIG_HIGHMEM).\n",
- (unsigned long long)bank->start,
- (unsigned long long)bank->start + bank->size - 1);
- continue;
- }
- /*
- * Check whether this memory bank would partially overlap
- * the vmalloc area.
- */
- if (bank->size > size_limit) {
- printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
- "to -%.8llx (vmalloc region overlap).\n",
- (unsigned long long)bank->start,
- (unsigned long long)bank->start + bank->size - 1,
- (unsigned long long)bank->start + size_limit - 1);
- bank->size = size_limit;
+ if (reg->size > size_limit) {
+ phys_addr_t overlap_size = reg->size - size_limit;
+
+ pr_notice("Truncating RAM at %pa-%pa to -%pa",
+ &block_start, &block_end, &vmalloc_limit);
+ memblock_remove(vmalloc_limit, overlap_size);
+ block_end = vmalloc_limit;
+ }
}
-#endif
- if (!bank->highmem) {
- phys_addr_t bank_end = bank->start + bank->size;
- if (bank_end > arm_lowmem_limit)
- arm_lowmem_limit = bank_end;
+ if (!highmem) {
+ if (block_end > arm_lowmem_limit) {
+ if (reg->size > size_limit)
+ arm_lowmem_limit = vmalloc_limit;
+ else
+ arm_lowmem_limit = block_end;
+ }
/*
* Find the first non-section-aligned page, and point
@@ -1145,35 +1118,15 @@ void __init sanity_check_meminfo(void)
* occurs before any free memory is mapped.
*/
if (!memblock_limit) {
- if (!IS_ALIGNED(bank->start, SECTION_SIZE))
- memblock_limit = bank->start;
- else if (!IS_ALIGNED(bank_end, SECTION_SIZE))
- memblock_limit = bank_end;
+ if (!IS_ALIGNED(block_start, SECTION_SIZE))
+ memblock_limit = block_start;
+ else if (!IS_ALIGNED(block_end, SECTION_SIZE))
+ memblock_limit = arm_lowmem_limit;
}
- }
- j++;
- }
-#ifdef CONFIG_HIGHMEM
- if (highmem) {
- const char *reason = NULL;
- if (cache_is_vipt_aliasing()) {
- /*
- * Interactions between kmap and other mappings
- * make highmem support with aliasing VIPT caches
- * rather difficult.
- */
- reason = "with VIPT aliasing cache";
- }
- if (reason) {
- printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
- reason);
- while (j > 0 && meminfo.bank[j - 1].highmem)
- j--;
}
}
-#endif
- meminfo.nr_banks = j;
+
high_memory = __va(arm_lowmem_limit - 1) + 1;
/*
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 55764a7ef1f..da1874f9f8c 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -88,30 +88,35 @@ static unsigned long irbar_read(void)
void __init sanity_check_meminfo_mpu(void)
{
int i;
- struct membank *bank = meminfo.bank;
phys_addr_t phys_offset = PHYS_OFFSET;
phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size;
-
- /* Initially only use memory continuous from PHYS_OFFSET */
- if (bank_phys_start(&bank[0]) != phys_offset)
- panic("First memory bank must be contiguous from PHYS_OFFSET");
-
- /* Banks have already been sorted by start address */
- for (i = 1; i < meminfo.nr_banks; i++) {
- if (bank[i].start <= bank_phys_end(&bank[0]) &&
- bank_phys_end(&bank[i]) > bank_phys_end(&bank[0])) {
- bank[0].size = bank_phys_end(&bank[i]) - bank[0].start;
+ struct memblock_region *reg;
+ bool first = true;
+ phys_addr_t mem_start;
+ phys_addr_t mem_end;
+
+ for_each_memblock(memory, reg) {
+ if (first) {
+ /*
+ * Initially only use memory continuous from
+ * PHYS_OFFSET */
+ if (reg->base != phys_offset)
+ panic("First memory bank must be contiguous from PHYS_OFFSET");
+
+ mem_start = reg->base;
+ mem_end = reg->base + reg->size;
+ specified_mem_size = reg->size;
+ first = false;
} else {
- pr_notice("Ignoring RAM after 0x%.8lx. "
- "First non-contiguous (ignored) bank start: 0x%.8lx\n",
- (unsigned long)bank_phys_end(&bank[0]),
- (unsigned long)bank_phys_start(&bank[i]));
- break;
+ /*
+ * memblock auto merges contiguous blocks, remove
+ * all blocks afterwards
+ */
+ pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n",
+ &mem_start, &reg->base);
+ memblock_remove(reg->base, reg->size);
}
}
- /* All contiguous banks are now merged in to the first bank */
- meminfo.nr_banks = 1;
- specified_mem_size = bank[0].size;
/*
* MPU has curious alignment requirements: Size must be power of 2, and
@@ -128,23 +133,24 @@ void __init sanity_check_meminfo_mpu(void)
*/
aligned_region_size = (phys_offset - 1) ^ (phys_offset);
/* Find the max power-of-two sized region that fits inside our bank */
- rounded_mem_size = (1 << __fls(bank[0].size)) - 1;
+ rounded_mem_size = (1 << __fls(specified_mem_size)) - 1;
/* The actual region size is the smaller of the two */
aligned_region_size = aligned_region_size < rounded_mem_size
? aligned_region_size + 1
: rounded_mem_size + 1;
- if (aligned_region_size != specified_mem_size)
- pr_warn("Truncating memory from 0x%.8lx to 0x%.8lx (MPU region constraints)",
- (unsigned long)specified_mem_size,
- (unsigned long)aligned_region_size);
+ if (aligned_region_size != specified_mem_size) {
+ pr_warn("Truncating memory from %pa to %pa (MPU region constraints)",
+ &specified_mem_size, &aligned_region_size);
+ memblock_remove(mem_start + aligned_region_size,
+ specified_mem_size - aligned_round_size);
+
+ mem_end = mem_start + aligned_region_size;
+ }
- meminfo.bank[0].size = aligned_region_size;
- pr_debug("MPU Region from 0x%.8lx size 0x%.8lx (end 0x%.8lx))\n",
- (unsigned long)phys_offset,
- (unsigned long)aligned_region_size,
- (unsigned long)bank_phys_end(&bank[0]));
+ pr_debug("MPU Region from %pa size %pa (end %pa))\n",
+ &phys_offset, &aligned_region_size, &mem_end);
}
@@ -292,7 +298,7 @@ void __init sanity_check_meminfo(void)
{
phys_addr_t end;
sanity_check_meminfo_mpu();
- end = bank_phys_end(&meminfo.bank[meminfo.nr_banks - 1]);
+ end = memblock_end_of_DRAM();
high_memory = __va(end - 1) + 1;
}