diff options
Diffstat (limited to 'arch/arm/mm')
28 files changed, 98 insertions, 69 deletions
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 6cacdc8dd65..cd2c88e7a8f 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -421,24 +421,28 @@ config CPU_32v3 select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v4 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v4T bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v5 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v6 bool @@ -776,6 +780,7 @@ config CPU_BPREDICT_DISABLE config TLS_REG_EMUL bool + select NEED_KUSER_HELPERS help An SMP system using a pre-ARMv6 processor (there are apparently a few prototypes like that in existence) and therefore access to @@ -783,11 +788,43 @@ config TLS_REG_EMUL config NEEDS_SYSCALL_FOR_CMPXCHG bool + select NEED_KUSER_HELPERS help SMP on a pre-ARMv6 processor? Well OK then. Forget about fast user space cmpxchg support. It is just not possible. +config NEED_KUSER_HELPERS + bool + +config KUSER_HELPERS + bool "Enable kuser helpers in vector page" if !NEED_KUSER_HELPERS + default y + help + Warning: disabling this option may break user programs. + + Provide kuser helpers in the vector page. The kernel provides + helper code to userspace in read only form at a fixed location + in the high vector page to allow userspace to be independent of + the CPU type fitted to the system. This permits binaries to be + run on ARMv4 through to ARMv7 without modification. + + See Documentation/arm/kernel_user_helpers.txt for details. + + However, the fixed address nature of these helpers can be used + by ROP (return orientated programming) authors when creating + exploits. + + If all of the binaries and libraries which run on your platform + are built specifically for your platform, and make no use of + these helpers, then you can turn this option off to hinder + such exploits. However, in that case, if a binary or library + relying on those helpers is run, it will receive a SIGILL signal, + which will terminate the program. + + Say N here only if you are absolutely certain that you do not + need these helpers; otherwise, the safe option is to say Y. + config DMA_CACHE_RWFO bool "Enable read/write for ownership DMA cache maintenance" depends on CPU_V6K && SMP diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index b55b1015724..4a0544492f1 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -245,7 +245,8 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) { local_flush_bp_all(); local_flush_tlb_all(); - dummy_flush_tlb_a15_erratum(); + if (erratum_a15_798181()) + dummy_flush_tlb_a15_erratum(); } atomic64_set(&per_cpu(active_asids, cpu), asid); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4f56617a239..53cdbd39ec8 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -989,6 +989,7 @@ phys_addr_t arm_lowmem_limit __initdata = 0; void __init sanity_check_meminfo(void) { + phys_addr_t memblock_limit = 0; int i, j, highmem = 0; phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1; @@ -1052,9 +1053,32 @@ void __init sanity_check_meminfo(void) bank->size = size_limit; } #endif - if (!bank->highmem && bank->start + bank->size > arm_lowmem_limit) - arm_lowmem_limit = bank->start + bank->size; + if (!bank->highmem) { + phys_addr_t bank_end = bank->start + bank->size; + if (bank_end > arm_lowmem_limit) + arm_lowmem_limit = bank_end; + + /* + * Find the first non-section-aligned page, and point + * memblock_limit at it. This relies on rounding the + * limit down to be section-aligned, which happens at + * the end of this function. + * + * With this algorithm, the start or end of almost any + * bank can be non-section-aligned. The only exception + * is that the start of the bank 0 must be section- + * aligned, since otherwise memory would need to be + * allocated when mapping the start of bank 0, which + * occurs before any free memory is mapped. + */ + if (!memblock_limit) { + if (!IS_ALIGNED(bank->start, SECTION_SIZE)) + memblock_limit = bank->start; + else if (!IS_ALIGNED(bank_end, SECTION_SIZE)) + memblock_limit = bank_end; + } + } j++; } #ifdef CONFIG_HIGHMEM @@ -1079,7 +1103,18 @@ void __init sanity_check_meminfo(void) #endif meminfo.nr_banks = j; high_memory = __va(arm_lowmem_limit - 1) + 1; - memblock_set_current_limit(arm_lowmem_limit); + + /* + * Round the memblock limit down to a section size. This + * helps to ensure that we will allocate memory from the + * last full section, which should be mapped. + */ + if (memblock_limit) + memblock_limit = round_down(memblock_limit, SECTION_SIZE); + if (!memblock_limit) + memblock_limit = arm_lowmem_limit; + + memblock_set_current_limit(memblock_limit); } static inline void prepare_page_table(void) @@ -1160,7 +1195,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) /* * Allocate the vector page early. */ - vectors = early_alloc(PAGE_SIZE); + vectors = early_alloc(PAGE_SIZE * 2); early_trap_init(vectors); @@ -1205,15 +1240,27 @@ static void __init devicemaps_init(struct machine_desc *mdesc) map.pfn = __phys_to_pfn(virt_to_phys(vectors)); map.virtual = 0xffff0000; map.length = PAGE_SIZE; +#ifdef CONFIG_KUSER_HELPERS map.type = MT_HIGH_VECTORS; +#else + map.type = MT_LOW_VECTORS; +#endif create_mapping(&map); if (!vectors_high()) { map.virtual = 0; + map.length = PAGE_SIZE * 2; map.type = MT_LOW_VECTORS; create_mapping(&map); } + /* Now create a kernel read-only mapping */ + map.pfn += 1; + map.virtual = 0xffff0000 + PAGE_SIZE; + map.length = PAGE_SIZE; + map.type = MT_LOW_VECTORS; + create_mapping(&map); + /* * Ask the machine support to map in the statically mapped devices. */ @@ -1276,8 +1323,6 @@ void __init paging_init(struct machine_desc *mdesc) { void *zero_page; - memblock_set_current_limit(arm_lowmem_limit); - build_mem_type_table(); prepare_page_table(); map_lowmem(); diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 2bb61e703d6..d1a2d05971e 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -443,8 +443,6 @@ ENTRY(cpu_arm1020_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm1020_setup, #function __arm1020_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 8f96aa40f51..9d89405c3d0 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -425,8 +425,6 @@ ENTRY(cpu_arm1020e_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm1020e_setup, #function __arm1020e_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 8ebe4a469a2..6f01a0ae3b3 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -407,8 +407,6 @@ ENTRY(cpu_arm1022_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm1022_setup, #function __arm1022_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 093fc7e520c..4799a24b43e 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -396,9 +396,6 @@ ENTRY(cpu_arm1026_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - - __CPUINIT - .type __arm1026_setup, #function __arm1026_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 0ac908c7ade..d42c37f9f5b 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -116,8 +116,6 @@ ENTRY(cpu_arm720_reset) ENDPROC(cpu_arm720_reset) .popsection - __CPUINIT - .type __arm710_setup, #function __arm710_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index fde2d2a794c..9b0ae90cbf1 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -60,8 +60,6 @@ ENTRY(cpu_arm740_reset) ENDPROC(cpu_arm740_reset) .popsection - __CPUINIT - .type __arm740_setup, #function __arm740_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 6ddea3e464b..f6cc3f63ce3 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -51,8 +51,6 @@ ENTRY(cpu_arm7tdmi_reset) ENDPROC(cpu_arm7tdmi_reset) .popsection - __CPUINIT - .type __arm7tdmi_setup, #function __arm7tdmi_setup: mov pc, lr diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 2556cf1c2da..549557df6d5 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -410,8 +410,6 @@ ENTRY(cpu_arm920_do_resume) ENDPROC(cpu_arm920_do_resume) #endif - __CPUINIT - .type __arm920_setup, #function __arm920_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 4464c49d744..2a758b06c6f 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -388,8 +388,6 @@ ENTRY(cpu_arm922_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm922_setup, #function __arm922_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 281eb9b9c1d..97448c3acf3 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -438,8 +438,6 @@ ENTRY(cpu_arm925_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm925_setup, #function __arm925_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 344c8a548cc..0f098f407c9 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -425,8 +425,6 @@ ENTRY(cpu_arm926_do_resume) ENDPROC(cpu_arm926_do_resume) #endif - __CPUINIT - .type __arm926_setup, #function __arm926_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 8da189d4a40..1c39a704ff6 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -273,8 +273,6 @@ ENDPROC(arm940_dma_unmap_area) @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) define_cache_functions arm940 - __CPUINIT - .type __arm940_setup, #function __arm940_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index f666cf34075..0289cd905e7 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -326,8 +326,6 @@ ENTRY(cpu_arm946_dcache_clean_area) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr - __CPUINIT - .type __arm946_setup, #function __arm946_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 8881391dfb9..f51197ba754 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -51,8 +51,6 @@ ENTRY(cpu_arm9tdmi_reset) ENDPROC(cpu_arm9tdmi_reset) .popsection - __CPUINIT - .type __arm9tdmi_setup, #function __arm9tdmi_setup: mov pc, lr diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index aaeb6c127c7..2dfc0f1d3bf 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -135,8 +135,6 @@ ENTRY(cpu_fa526_set_pte_ext) #endif mov pc, lr - __CPUINIT - .type __fa526_setup, #function __fa526_setup: /* On return of this routine, r0 must carry correct flags for CFG register */ diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 4106b09e0c2..d5146b98c8d 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -514,8 +514,6 @@ ENTRY(cpu_feroceon_set_pte_ext) #endif mov pc, lr - __CPUINIT - .type __feroceon_setup, #function __feroceon_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 0b60dd3d742..40acba59573 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -383,8 +383,6 @@ ENTRY(cpu_mohawk_do_resume) ENDPROC(cpu_mohawk_do_resume) #endif - __CPUINIT - .type __mohawk_setup, #function __mohawk_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 775d70fba93..c45319c8f1d 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -159,8 +159,6 @@ ENTRY(cpu_sa110_set_pte_ext) #endif mov pc, lr - __CPUINIT - .type __sa110_setup, #function __sa110_setup: mov r10, #0 diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index d92dfd08142..09d241ae2db 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -198,8 +198,6 @@ ENTRY(cpu_sa1100_do_resume) ENDPROC(cpu_sa1100_do_resume) #endif - __CPUINIT - .type __sa1100_setup, #function __sa1100_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 2d1ef87328a..1128064fddc 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -180,8 +180,6 @@ ENDPROC(cpu_v6_do_resume) .align - __CPUINIT - /* * __v6_setup * diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index 9704097c450..bdd3be4be77 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -110,7 +110,7 @@ ENTRY(cpu_v7_set_pte_ext) ARM( str r3, [r0, #2048]! ) THUMB( add r0, r0, #2048 ) THUMB( str r3, [r0] ) - ALT_SMP(mov pc,lr) + ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif mov pc, lr @@ -160,8 +160,6 @@ ENDPROC(cpu_v7_set_pte_ext) mcr p15, 0, \ttbr1, c2, c0, 1 @ load TTB1 .endm - __CPUINIT - /* AT * TFR EV X F I D LR S * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM @@ -172,5 +170,3 @@ ENDPROC(cpu_v7_set_pte_ext) .type v7_crval, #object v7_crval: crval clear=0x2120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c - - .previous diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 5ffe1956c6d..01a719e18bb 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -81,7 +81,7 @@ ENTRY(cpu_v7_set_pte_ext) tst r3, #1 << (55 - 32) @ L_PTE_DIRTY orreq r2, #L_PTE_RDONLY 1: strd r2, r3, [r0] - ALT_SMP(mov pc, lr) + ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif mov pc, lr @@ -140,8 +140,6 @@ ENDPROC(cpu_v7_set_pte_ext) mcrr p15, 0, \ttbr0, \zero, c2 @ load TTBR0 .endm - __CPUINIT - /* * AT * TFR EV X F IHD LR S @@ -153,5 +151,3 @@ ENDPROC(cpu_v7_set_pte_ext) .type v7_crval, #object v7_crval: crval clear=0x0120c302, mmuset=0x30c23c7d, ucset=0x00c01c7c - - .previous diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 7ef3ad05df3..73398bcf9bd 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -75,13 +75,14 @@ ENTRY(cpu_v7_do_idle) ENDPROC(cpu_v7_do_idle) ENTRY(cpu_v7_dcache_clean_area) - ALT_SMP(mov pc, lr) @ MP extensions imply L1 PTW - ALT_UP(W(nop)) - dcache_line_size r2, r3 -1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + ALT_SMP(W(nop)) @ MP extensions imply L1 PTW + ALT_UP_B(1f) + mov pc, lr +1: dcache_line_size r2, r3 +2: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, r2 subs r1, r1, r2 - bhi 1b + bhi 2b dsb mov pc, lr ENDPROC(cpu_v7_dcache_clean_area) @@ -167,8 +168,6 @@ ENDPROC(cpu_pj4b_do_idle) #endif - __CPUINIT - /* * __v7_setup * diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index e8efd83b6f2..dc164589004 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -446,8 +446,6 @@ ENTRY(cpu_xsc3_do_resume) ENDPROC(cpu_xsc3_do_resume) #endif - __CPUINIT - .type __xsc3_setup, #function __xsc3_setup: mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index e766f889bfd..d19b1cfcad9 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -558,8 +558,6 @@ ENTRY(cpu_xscale_do_resume) ENDPROC(cpu_xscale_do_resume) #endif - __CPUINIT - .type __xscale_setup, #function __xscale_setup: mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB |