diff options
Diffstat (limited to 'arch/arm/mm')
-rw-r--r-- | arch/arm/mm/alignment.c | 26 | ||||
-rw-r--r-- | arch/arm/mm/cache-feroceon-l2.c | 4 | ||||
-rw-r--r-- | arch/arm/mm/cache-xsc3l2.c | 4 | ||||
-rw-r--r-- | arch/arm/mm/fault.c | 1 | ||||
-rw-r--r-- | arch/arm/mm/mmu.c | 117 | ||||
-rw-r--r-- | arch/arm/mm/proc-v7.S | 12 | ||||
-rw-r--r-- | arch/arm/mm/proc-xsc3.S | 2 |
7 files changed, 120 insertions, 46 deletions
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 133e65d166b..2d5884ce043 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -70,6 +70,10 @@ static unsigned long ai_dword; static unsigned long ai_multi; static int ai_usermode; +#define UM_WARN (1 << 0) +#define UM_FIXUP (1 << 1) +#define UM_SIGNAL (1 << 2) + #ifdef CONFIG_PROC_FS static const char *usermode_action[] = { "ignored", @@ -754,7 +758,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) user: ai_user += 1; - if (ai_usermode & 1) + if (ai_usermode & UM_WARN) printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx " "Address=0x%08lx FSR 0x%03x\n", current->comm, task_pid_nr(current), instrptr, @@ -762,10 +766,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) thumb_mode(regs) ? tinstr : instr, addr, fsr); - if (ai_usermode & 2) + if (ai_usermode & UM_FIXUP) goto fixup; - if (ai_usermode & 4) + if (ai_usermode & UM_SIGNAL) force_sig(SIGBUS, current); else set_cr(cr_no_alignment); @@ -796,6 +800,22 @@ static int __init alignment_init(void) res->write_proc = proc_alignment_write; #endif + /* + * ARMv6 and later CPUs can perform unaligned accesses for + * most single load and store instructions up to word size. + * LDM, STM, LDRD and STRD still need to be handled. + * + * Ignoring the alignment fault is not an option on these + * CPUs since we spin re-faulting the instruction without + * making any progress. + */ + if (cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U)) { + cr_alignment &= ~CR_A; + cr_no_alignment &= ~CR_A; + set_cr(cr_alignment); + ai_usermode = UM_FIXUP; + } + hook_fault_code(1, do_alignment, SIGILL, "alignment exception"); hook_fault_code(3, do_alignment, SIGILL, "alignment exception"); diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index 13cdae8b0d4..80cd207cbae 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -150,7 +150,7 @@ static void feroceon_l2_inv_range(unsigned long start, unsigned long end) /* * Clean and invalidate partial last cache line. */ - if (end & (CACHE_LINE_SIZE - 1)) { + if (start < end && end & (CACHE_LINE_SIZE - 1)) { l2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1)); end &= ~(CACHE_LINE_SIZE - 1); } @@ -158,7 +158,7 @@ static void feroceon_l2_inv_range(unsigned long start, unsigned long end) /* * Invalidate all full cache lines between 'start' and 'end'. */ - while (start != end) { + while (start < end) { unsigned long range_end = calc_range_end(start, end); l2_inv_pa_range(start, range_end - CACHE_LINE_SIZE); start = range_end; diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c index 10b1bae1a25..464de893a98 100644 --- a/arch/arm/mm/cache-xsc3l2.c +++ b/arch/arm/mm/cache-xsc3l2.c @@ -98,7 +98,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end) /* * Clean and invalidate partial last cache line. */ - if (end & (CACHE_LINE_SIZE - 1)) { + if (start < end && (end & (CACHE_LINE_SIZE - 1))) { xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1)); xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1)); end &= ~(CACHE_LINE_SIZE - 1); @@ -107,7 +107,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end) /* * Invalidate all full cache lines between 'start' and 'end'. */ - while (start != end) { + while (start < end) { xsc3_l2_inv_pa(start); start += CACHE_LINE_SIZE; } diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 2df8d9facf5..22c9530e91e 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/signal.h> #include <linux/mm.h> +#include <linux/hardirq.h> #include <linux/init.h> #include <linux/kprobes.h> #include <linux/uaccess.h> diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 8ba75406455..7f36c825718 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -180,20 +180,20 @@ void adjust_cr(unsigned long mask, unsigned long set) #endif #define PROT_PTE_DEVICE L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_WRITE -#define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_XN|PMD_SECT_AP_WRITE +#define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE static struct mem_type mem_types[] = { [MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED | L_PTE_SHARED, .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PROT_SECT_DEVICE | PMD_SECT_UNCACHED, + .prot_sect = PROT_SECT_DEVICE | PMD_SECT_S, .domain = DOMAIN_IO, }, [MT_DEVICE_NONSHARED] = { /* ARMv6 non-shared device */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_NONSHARED, .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PROT_SECT_DEVICE | PMD_SECT_TEX(2), + .prot_sect = PROT_SECT_DEVICE, .domain = DOMAIN_IO, }, [MT_DEVICE_CACHED] = { /* ioremap_cached */ @@ -205,7 +205,13 @@ static struct mem_type mem_types[] = { [MT_DEVICE_WC] = { /* ioremap_wc */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC, .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PROT_SECT_DEVICE | PMD_SECT_BUFFERABLE, + .prot_sect = PROT_SECT_DEVICE, + .domain = DOMAIN_IO, + }, + [MT_UNCACHED] = { + .prot_pte = PROT_PTE_DEVICE, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN, .domain = DOMAIN_IO, }, [MT_CACHECLEAN] = { @@ -273,22 +279,23 @@ static void __init build_mem_type_table(void) #endif /* - * On non-Xscale3 ARMv5-and-older systems, use CB=01 - * (Uncached/Buffered) for ioremap_wc() mappings. On XScale3 - * and ARMv6+, use TEXCB=00100 mappings (Inner/Outer Uncacheable - * in xsc3 parlance, Uncached Normal in ARMv6 parlance). + * Strip out features not present on earlier architectures. + * Pre-ARMv5 CPUs don't have TEX bits. Pre-ARMv6 CPUs or those + * without extended page tables don't have the 'Shared' bit. */ - if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) { - mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1); - mem_types[MT_DEVICE_WC].prot_sect &= ~PMD_SECT_BUFFERABLE; - } + if (cpu_arch < CPU_ARCH_ARMv5) + for (i = 0; i < ARRAY_SIZE(mem_types); i++) + mem_types[i].prot_sect &= ~PMD_SECT_TEX(7); + if ((cpu_arch < CPU_ARCH_ARMv6 || !(cr & CR_XP)) && !cpu_is_xsc3()) + for (i = 0; i < ARRAY_SIZE(mem_types); i++) + mem_types[i].prot_sect &= ~PMD_SECT_S; /* - * ARMv5 and lower, bit 4 must be set for page tables. - * (was: cache "update-able on write" bit on ARM610) - * However, Xscale cores require this bit to be cleared. + * ARMv5 and lower, bit 4 must be set for page tables (was: cache + * "update-able on write" bit on ARM610). However, Xscale and + * Xscale3 require this bit to be cleared. */ - if (cpu_is_xscale()) { + if (cpu_is_xscale() || cpu_is_xsc3()) { for (i = 0; i < ARRAY_SIZE(mem_types); i++) { mem_types[i].prot_sect &= ~PMD_BIT4; mem_types[i].prot_l1 &= ~PMD_BIT4; @@ -302,6 +309,64 @@ static void __init build_mem_type_table(void) } } + /* + * Mark the device areas according to the CPU/architecture. + */ + if (cpu_is_xsc3() || (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP))) { + if (!cpu_is_xsc3()) { + /* + * Mark device regions on ARMv6+ as execute-never + * to prevent speculative instruction fetches. + */ + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_XN; + mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_XN; + mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_XN; + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_XN; + } + if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) { + /* + * For ARMv7 with TEX remapping, + * - shared device is SXCB=1100 + * - nonshared device is SXCB=0100 + * - write combine device mem is SXCB=0001 + * (Uncached Normal memory) + */ + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1); + mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(1); + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE; + } else if (cpu_is_xsc3()) { + /* + * For Xscale3, + * - shared device is TEXCB=00101 + * - nonshared device is TEXCB=01000 + * - write combine device mem is TEXCB=00100 + * (Inner/Outer Uncacheable in xsc3 parlance) + */ + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1) | PMD_SECT_BUFFERED; + mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2); + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1); + } else { + /* + * For ARMv6 and ARMv7 without TEX remapping, + * - shared device is TEXCB=00001 + * - nonshared device is TEXCB=01000 + * - write combine device mem is TEXCB=00100 + * (Uncached Normal in ARMv6 parlance). + */ + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED; + mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2); + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1); + } + } else { + /* + * On others, write combining is "Uncached/Buffered" + */ + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE; + } + + /* + * Now deal with the memory-type mappings + */ cp = &cache_policies[cachepolicy]; vecs_pgprot = kern_pgprot = user_pgprot = cp->pte; @@ -317,12 +382,8 @@ static void __init build_mem_type_table(void) * Enable CPU-specific coherency if supported. * (Only available on XSC3 at the moment.) */ - if (arch_is_coherent()) { - if (cpu_is_xsc3()) { - mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; - mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED; - } - } + if (arch_is_coherent() && cpu_is_xsc3()) + mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; /* * ARMv6 and above have extended page tables. @@ -336,11 +397,6 @@ static void __init build_mem_type_table(void) mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; - /* - * Mark the device area as "shared device" - */ - mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED; - #ifdef CONFIG_SMP /* * Mark memory with the "shared" attribute for SMP systems @@ -360,9 +416,6 @@ static void __init build_mem_type_table(void) mem_types[MT_LOW_VECTORS].prot_pte |= vecs_pgprot; mem_types[MT_HIGH_VECTORS].prot_pte |= vecs_pgprot; - if (cpu_arch < CPU_ARCH_ARMv5) - mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1); - pgprot_user = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot); pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_WRITE | @@ -654,7 +707,7 @@ static inline void prepare_page_table(struct meminfo *mi) /* * Clear out all the mappings below the kernel image. */ - for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE) + for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE) pmd_clear(pmd_off_k(addr)); #ifdef CONFIG_XIP_KERNEL @@ -766,7 +819,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) */ #ifdef CONFIG_XIP_KERNEL map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK); - map.virtual = MODULE_START; + map.virtual = MODULES_VADDR; map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK; map.type = MT_ROM; create_mapping(&map); diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 07f82db7094..4d3c0a73e7f 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -115,7 +115,7 @@ ENTRY(cpu_v7_set_pte_ext) orr r3, r3, r2 orr r3, r3, #PTE_EXT_AP0 | 2 - tst r2, #1 << 4 + tst r1, #1 << 4 orrne r3, r3, #PTE_EXT_TEX(1) tst r1, #L_PTE_WRITE @@ -192,11 +192,11 @@ __v7_setup: mov pc, lr @ return to head.S:__ret ENDPROC(__v7_setup) - /* - * V X F I D LR - * .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM - * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced - * 0 110 0011 1.00 .111 1101 < we want + /* AT + * TFR EV X F I D LR + * .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM + * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced + * 1 0 110 0011 1.00 .111 1101 < we want */ .type v7_crval, #object v7_crval: diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 04dc8b65401..8f6cf56c11c 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -349,7 +349,7 @@ ENTRY(cpu_xsc3_switch_mm) cpu_xsc3_mt_table: .long 0x00 @ L_PTE_MT_UNCACHED .long PTE_EXT_TEX(1) @ L_PTE_MT_BUFFERABLE - .long PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH + .long PTE_EXT_TEX(5) | PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEBACK .long PTE_EXT_TEX(1) | PTE_BUFFERABLE @ L_PTE_MT_DEV_SHARED .long 0x00 @ unused |