summaryrefslogtreecommitdiffstats
path: root/arch/arm/oprofile
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/oprofile')
-rw-r--r--arch/arm/oprofile/Kconfig19
-rw-r--r--arch/arm/oprofile/Makefile4
-rw-r--r--arch/arm/oprofile/common.c8
-rw-r--r--arch/arm/oprofile/op_arm_model.h3
-rw-r--r--arch/arm/oprofile/op_model_arm11_core.c162
-rw-r--r--arch/arm/oprofile/op_model_arm11_core.h45
-rw-r--r--arch/arm/oprofile/op_model_mpcore.c296
-rw-r--r--arch/arm/oprofile/op_model_mpcore.h61
-rw-r--r--arch/arm/oprofile/op_model_v6.c67
9 files changed, 664 insertions, 1 deletions
diff --git a/arch/arm/oprofile/Kconfig b/arch/arm/oprofile/Kconfig
index 19d37730b66..afd93ad02fe 100644
--- a/arch/arm/oprofile/Kconfig
+++ b/arch/arm/oprofile/Kconfig
@@ -19,5 +19,24 @@ config OPROFILE
If unsure, say N.
+if OPROFILE
+
+config OPROFILE_ARMV6
+ bool
+ depends on CPU_V6 && !SMP
+ default y
+ select OPROFILE_ARM11_CORE
+
+config OPROFILE_MPCORE
+ bool
+ depends on CPU_V6 && SMP
+ default y
+ select OPROFILE_ARM11_CORE
+
+config OPROFILE_ARM11_CORE
+ bool
+
+endif
+
endmenu
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index 6a94e54848f..e61d0cc520b 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -8,4 +8,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
oprofile-$(CONFIG_CPU_XSCALE) += op_model_xscale.o
-
+oprofile-$(CONFIG_OPROFILE_ARM11_CORE) += op_model_arm11_core.o
+oprofile-$(CONFIG_OPROFILE_ARMV6) += op_model_v6.o
+oprofile-$(CONFIG_OPROFILE_MPCORE) += op_model_mpcore.o
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index 6f833358cd0..0a007b931f6 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -135,6 +135,14 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
spec = &op_xscale_spec;
#endif
+#ifdef CONFIG_OPROFILE_ARMV6
+ spec = &op_armv6_spec;
+#endif
+
+#ifdef CONFIG_OPROFILE_MPCORE
+ spec = &op_mpcore_spec;
+#endif
+
if (spec) {
ret = spec->init();
if (ret < 0)
diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h
index 38c6ad15854..4899c629aa0 100644
--- a/arch/arm/oprofile/op_arm_model.h
+++ b/arch/arm/oprofile/op_arm_model.h
@@ -24,6 +24,9 @@ struct op_arm_model_spec {
extern struct op_arm_model_spec op_xscale_spec;
#endif
+extern struct op_arm_model_spec op_armv6_spec;
+extern struct op_arm_model_spec op_mpcore_spec;
+
extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
diff --git a/arch/arm/oprofile/op_model_arm11_core.c b/arch/arm/oprofile/op_model_arm11_core.c
new file mode 100644
index 00000000000..ad80752cb9f
--- /dev/null
+++ b/arch/arm/oprofile/op_model_arm11_core.c
@@ -0,0 +1,162 @@
+/**
+ * @file op_model_arm11_core.c
+ * ARM11 Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+
+#include "op_counter.h"
+#include "op_arm_model.h"
+#include "op_model_arm11_core.h"
+
+/*
+ * ARM11 PMU support
+ */
+static inline void arm11_write_pmnc(u32 val)
+{
+ /* upper 4bits and 7, 11 are write-as-0 */
+ val &= 0x0ffff77f;
+ asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r" (val));
+}
+
+static inline u32 arm11_read_pmnc(void)
+{
+ u32 val;
+ asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r" (val));
+ return val;
+}
+
+static void arm11_reset_counter(unsigned int cnt)
+{
+ u32 val = -(u32)counter_config[CPU_COUNTER(smp_processor_id(), cnt)].count;
+ switch (cnt) {
+ case CCNT:
+ asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r" (val));
+ break;
+
+ case PMN0:
+ asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r" (val));
+ break;
+
+ case PMN1:
+ asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r" (val));
+ break;
+ }
+}
+
+int arm11_setup_pmu(void)
+{
+ unsigned int cnt;
+ u32 pmnc;
+
+ if (arm11_read_pmnc() & PMCR_E) {
+ printk(KERN_ERR "oprofile: CPU%u PMU still enabled when setup new event counter.\n", smp_processor_id());
+ return -EBUSY;
+ }
+
+ /* initialize PMNC, reset overflow, D bit, C bit and P bit. */
+ arm11_write_pmnc(PMCR_OFL_PMN0 | PMCR_OFL_PMN1 | PMCR_OFL_CCNT |
+ PMCR_C | PMCR_P);
+
+ for (pmnc = 0, cnt = PMN0; cnt <= CCNT; cnt++) {
+ unsigned long event;
+
+ if (!counter_config[CPU_COUNTER(smp_processor_id(), cnt)].enabled)
+ continue;
+
+ event = counter_config[CPU_COUNTER(smp_processor_id(), cnt)].event & 255;
+
+ /*
+ * Set event (if destined for PMNx counters)
+ */
+ if (cnt == PMN0) {
+ pmnc |= event << 20;
+ } else if (cnt == PMN1) {
+ pmnc |= event << 12;
+ }
+
+ /*
+ * We don't need to set the event if it's a cycle count
+ * Enable interrupt for this counter
+ */
+ pmnc |= PMCR_IEN_PMN0 << cnt;
+ arm11_reset_counter(cnt);
+ }
+ arm11_write_pmnc(pmnc);
+
+ return 0;
+}
+
+int arm11_start_pmu(void)
+{
+ arm11_write_pmnc(arm11_read_pmnc() | PMCR_E);
+ return 0;
+}
+
+int arm11_stop_pmu(void)
+{
+ unsigned int cnt;
+
+ arm11_write_pmnc(arm11_read_pmnc() & ~PMCR_E);
+
+ for (cnt = PMN0; cnt <= CCNT; cnt++)
+ arm11_reset_counter(cnt);
+
+ return 0;
+}
+
+/*
+ * CPU counters' IRQ handler (one IRQ per CPU)
+ */
+static irqreturn_t arm11_pmu_interrupt(int irq, void *arg)
+{
+ struct pt_regs *regs = get_irq_regs();
+ unsigned int cnt;
+ u32 pmnc;
+
+ pmnc = arm11_read_pmnc();
+
+ for (cnt = PMN0; cnt <= CCNT; cnt++) {
+ if ((pmnc & (PMCR_OFL_PMN0 << cnt)) && (pmnc & (PMCR_IEN_PMN0 << cnt))) {
+ arm11_reset_counter(cnt);
+ oprofile_add_sample(regs, CPU_COUNTER(smp_processor_id(), cnt));
+ }
+ }
+ /* Clear counter flag(s) */
+ arm11_write_pmnc(pmnc);
+ return IRQ_HANDLED;
+}
+
+int arm11_request_interrupts(int *irqs, int nr)
+{
+ unsigned int i;
+ int ret = 0;
+
+ for(i = 0; i < nr; i++) {
+ ret = request_irq(irqs[i], arm11_pmu_interrupt, IRQF_DISABLED, "CP15 PMU", NULL);
+ if (ret != 0) {
+ printk(KERN_ERR "oprofile: unable to request IRQ%u for MPCORE-EM\n",
+ irqs[i]);
+ break;
+ }
+ }
+
+ if (i != nr)
+ while (i-- != 0)
+ free_irq(irqs[i], NULL);
+
+ return ret;
+}
+
+void arm11_release_interrupts(int *irqs, int nr)
+{
+ unsigned int i;
+
+ for (i = 0; i < nr; i++)
+ free_irq(irqs[i], NULL);
+}
diff --git a/arch/arm/oprofile/op_model_arm11_core.h b/arch/arm/oprofile/op_model_arm11_core.h
new file mode 100644
index 00000000000..6f8538e5a96
--- /dev/null
+++ b/arch/arm/oprofile/op_model_arm11_core.h
@@ -0,0 +1,45 @@
+/**
+ * @file op_model_arm11_core.h
+ * ARM11 Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 Oprofile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Zwane Mwaikambo
+ */
+#ifndef OP_MODEL_ARM11_CORE_H
+#define OP_MODEL_ARM11_CORE_H
+
+/*
+ * Per-CPU PMCR
+ */
+#define PMCR_E (1 << 0) /* Enable */
+#define PMCR_P (1 << 1) /* Count reset */
+#define PMCR_C (1 << 2) /* Cycle counter reset */
+#define PMCR_D (1 << 3) /* Cycle counter counts every 64th cpu cycle */
+#define PMCR_IEN_PMN0 (1 << 4) /* Interrupt enable count reg 0 */
+#define PMCR_IEN_PMN1 (1 << 5) /* Interrupt enable count reg 1 */
+#define PMCR_IEN_CCNT (1 << 6) /* Interrupt enable cycle counter */
+#define PMCR_OFL_PMN0 (1 << 8) /* Count reg 0 overflow */
+#define PMCR_OFL_PMN1 (1 << 9) /* Count reg 1 overflow */
+#define PMCR_OFL_CCNT (1 << 10) /* Cycle counter overflow */
+
+#define PMN0 0
+#define PMN1 1
+#define CCNT 2
+
+#define CPU_COUNTER(cpu, counter) ((cpu) * 3 + (counter))
+
+int arm11_setup_pmu(void);
+int arm11_start_pmu(void);
+int arm11_stop_pmu(void);
+int arm11_request_interrupts(int *, int);
+void arm11_release_interrupts(int *, int);
+
+#endif
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
new file mode 100644
index 00000000000..89850071824
--- /dev/null
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -0,0 +1,296 @@
+/**
+ * @file op_model_mpcore.c
+ * MPCORE Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 Oprofile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Zwane Mwaikambo
+ *
+ * Counters:
+ * 0: PMN0 on CPU0, per-cpu configurable event counter
+ * 1: PMN1 on CPU0, per-cpu configurable event counter
+ * 2: CCNT on CPU0
+ * 3: PMN0 on CPU1
+ * 4: PMN1 on CPU1
+ * 5: CCNT on CPU1
+ * 6: PMN0 on CPU1
+ * 7: PMN1 on CPU1
+ * 8: CCNT on CPU1
+ * 9: PMN0 on CPU1
+ * 10: PMN1 on CPU1
+ * 11: CCNT on CPU1
+ * 12-19: configurable SCU event counters
+ */
+
+/* #define DEBUG */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/hardware.h>
+#include <asm/system.h>
+
+#include "op_counter.h"
+#include "op_arm_model.h"
+#include "op_model_arm11_core.h"
+#include "op_model_mpcore.h"
+
+/*
+ * MPCore SCU event monitor support
+ */
+#define SCU_EVENTMONITORS_VA_BASE __io_address(REALVIEW_MPCORE_SCU_BASE + 0x10)
+
+/*
+ * Bitmask of used SCU counters
+ */
+static unsigned int scu_em_used;
+
+/*
+ * 2 helper fns take a counter number from 0-7 (not the userspace-visible counter number)
+ */
+static inline void scu_reset_counter(struct eventmonitor __iomem *emc, unsigned int n)
+{
+ writel(-(u32)counter_config[SCU_COUNTER(n)].count, &emc->MC[n]);
+}
+
+static inline void scu_set_event(struct eventmonitor __iomem *emc, unsigned int n, u32 event)
+{
+ event &= 0xff;
+ writeb(event, &emc->MCEB[n]);
+}
+
+/*
+ * SCU counters' IRQ handler (one IRQ per counter => 2 IRQs per CPU)
+ */
+static irqreturn_t scu_em_interrupt(int irq, void *arg)
+{
+ struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+ unsigned int cnt;
+
+ cnt = irq - IRQ_PMU_SCU0;
+ oprofile_add_sample(get_irq_regs(), SCU_COUNTER(cnt));
+ scu_reset_counter(emc, cnt);
+
+ /* Clear overflow flag for this counter */
+ writel(1 << (cnt + 16), &emc->PMCR);
+
+ return IRQ_HANDLED;
+}
+
+/* Configure just the SCU counters that the user has requested */
+static void scu_setup(void)
+{
+ struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+ unsigned int i;
+
+ scu_em_used = 0;
+
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (counter_config[SCU_COUNTER(i)].enabled &&
+ counter_config[SCU_COUNTER(i)].event) {
+ scu_set_event(emc, i, 0); /* disable counter for now */
+ scu_em_used |= 1 << i;
+ }
+ }
+}
+
+static int scu_start(void)
+{
+ struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+ unsigned int temp, i;
+ unsigned long event;
+ int ret = 0;
+
+ /*
+ * request the SCU counter interrupts that we need
+ */
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (scu_em_used & (1 << i)) {
+ ret = request_irq(IRQ_PMU_SCU0 + i, scu_em_interrupt, IRQF_DISABLED, "SCU PMU", NULL);
+ if (ret) {
+ printk(KERN_ERR "oprofile: unable to request IRQ%u for SCU Event Monitor\n",
+ IRQ_PMU_SCU0 + i);
+ goto err_free_scu;
+ }
+ }
+ }
+
+ /*
+ * clear overflow and enable interrupt for all used counters
+ */
+ temp = readl(&emc->PMCR);
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (scu_em_used & (1 << i)) {
+ scu_reset_counter(emc, i);
+ event = counter_config[SCU_COUNTER(i)].event;
+ scu_set_event(emc, i, event);
+
+ /* clear overflow/interrupt */
+ temp |= 1 << (i + 16);
+ /* enable interrupt*/
+ temp |= 1 << (i + 8);
+ }
+ }
+
+ /* Enable all 8 counters */
+ temp |= PMCR_E;
+ writel(temp, &emc->PMCR);
+
+ return 0;
+
+ err_free_scu:
+ while (i--)
+ free_irq(IRQ_PMU_SCU0 + i, NULL);
+ return ret;
+}
+
+static void scu_stop(void)
+{
+ struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+ unsigned int temp, i;
+
+ /* Disable counter interrupts */
+ /* Don't disable all 8 counters (with the E bit) as they may be in use */
+ temp = readl(&emc->PMCR);
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (scu_em_used & (1 << i))
+ temp &= ~(1 << (i + 8));
+ }
+ writel(temp, &emc->PMCR);
+
+ /* Free counter interrupts and reset counters */
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (scu_em_used & (1 << i)) {
+ scu_reset_counter(emc, i);
+ free_irq(IRQ_PMU_SCU0 + i, NULL);
+ }
+ }
+}
+
+struct em_function_data {
+ int (*fn)(void);
+ int ret;
+};
+
+static void em_func(void *data)
+{
+ struct em_function_data *d = data;
+ int ret = d->fn();
+ if (ret)
+ d->ret = ret;
+}
+
+static int em_call_function(int (*fn)(void))
+{
+ struct em_function_data data;
+
+ data.fn = fn;
+ data.ret = 0;
+
+ smp_call_function(em_func, &data, 1, 1);
+ em_func(&data);
+
+ return data.ret;
+}
+
+/*
+ * Glue to stick the individual ARM11 PMUs and the SCU
+ * into the oprofile framework.
+ */
+static int em_setup_ctrs(void)
+{
+ int ret;
+
+ /* Configure CPU counters by cross-calling to the other CPUs */
+ ret = em_call_function(arm11_setup_pmu);
+ if (ret == 0)
+ scu_setup();
+
+ return 0;
+}
+
+static int arm11_irqs[] = {
+ [0] = IRQ_PMU_CPU0,
+ [1] = IRQ_PMU_CPU1,
+ [2] = IRQ_PMU_CPU2,
+ [3] = IRQ_PMU_CPU3
+};
+
+static int em_start(void)
+{
+ int ret;
+
+ ret = arm11_request_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ if (ret == 0) {
+ em_call_function(arm11_start_pmu);
+
+ ret = scu_start();
+ if (ret)
+ arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ }
+ return ret;
+}
+
+static void em_stop(void)
+{
+ em_call_function(arm11_stop_pmu);
+ arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ scu_stop();
+}
+
+/*
+ * Why isn't there a function to route an IRQ to a specific CPU in
+ * genirq?
+ */
+static void em_route_irq(int irq, unsigned int cpu)
+{
+ irq_desc[irq].affinity = cpumask_of_cpu(cpu);
+ irq_desc[irq].chip->set_affinity(irq, cpumask_of_cpu(cpu));
+}
+
+static int em_setup(void)
+{
+ /*
+ * Send SCU PMU interrupts to the "owner" CPU.
+ */
+ em_route_irq(IRQ_PMU_SCU0, 0);
+ em_route_irq(IRQ_PMU_SCU1, 0);
+ em_route_irq(IRQ_PMU_SCU2, 1);
+ em_route_irq(IRQ_PMU_SCU3, 1);
+ em_route_irq(IRQ_PMU_SCU4, 2);
+ em_route_irq(IRQ_PMU_SCU5, 2);
+ em_route_irq(IRQ_PMU_SCU6, 3);
+ em_route_irq(IRQ_PMU_SCU7, 3);
+
+ /*
+ * Send CP15 PMU interrupts to the owner CPU.
+ */
+ em_route_irq(IRQ_PMU_CPU0, 0);
+ em_route_irq(IRQ_PMU_CPU1, 1);
+ em_route_irq(IRQ_PMU_CPU2, 2);
+ em_route_irq(IRQ_PMU_CPU3, 3);
+
+ return 0;
+}
+
+struct op_arm_model_spec op_mpcore_spec = {
+ .init = em_setup,
+ .num_counters = MPCORE_NUM_COUNTERS,
+ .setup_ctrs = em_setup_ctrs,
+ .start = em_start,
+ .stop = em_stop,
+ .name = "arm/mpcore",
+};
diff --git a/arch/arm/oprofile/op_model_mpcore.h b/arch/arm/oprofile/op_model_mpcore.h
new file mode 100644
index 00000000000..73d81102368
--- /dev/null
+++ b/arch/arm/oprofile/op_model_mpcore.h
@@ -0,0 +1,61 @@
+/**
+ * @file op_model_mpcore.c
+ * MPCORE Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 Oprofile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Zwane Mwaikambo
+ */
+#ifndef OP_MODEL_MPCORE_H
+#define OP_MODEL_MPCORE_H
+
+struct eventmonitor {
+ unsigned long PMCR;
+ unsigned char MCEB[8];
+ unsigned long MC[8];
+};
+
+/*
+ * List of userspace counter numbers: note that the structure is important.
+ * The code relies on CPUn's counters being CPU0's counters + 3n
+ * and on CPU0's counters starting at 0
+ */
+
+#define COUNTER_CPU0_PMN0 0
+#define COUNTER_CPU0_PMN1 1
+#define COUNTER_CPU0_CCNT 2
+
+#define COUNTER_CPU1_PMN0 3
+#define COUNTER_CPU1_PMN1 4
+#define COUNTER_CPU1_CCNT 5
+
+#define COUNTER_CPU2_PMN0 6
+#define COUNTER_CPU2_PMN1 7
+#define COUNTER_CPU2_CCNT 8
+
+#define COUNTER_CPU3_PMN0 9
+#define COUNTER_CPU3_PMN1 10
+#define COUNTER_CPU3_CCNT 11
+
+#define COUNTER_SCU_MN0 12
+#define COUNTER_SCU_MN1 13
+#define COUNTER_SCU_MN2 14
+#define COUNTER_SCU_MN3 15
+#define COUNTER_SCU_MN4 16
+#define COUNTER_SCU_MN5 17
+#define COUNTER_SCU_MN6 18
+#define COUNTER_SCU_MN7 19
+#define NUM_SCU_COUNTERS 8
+
+#define SCU_COUNTER(number) ((number) + COUNTER_SCU_MN0)
+
+#define MPCORE_NUM_COUNTERS SCU_COUNTER(NUM_SCU_COUNTERS)
+
+#endif
diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c
new file mode 100644
index 00000000000..fe581383d3e
--- /dev/null
+++ b/arch/arm/oprofile/op_model_v6.c
@@ -0,0 +1,67 @@
+/**
+ * @file op_model_v6.c
+ * ARM11 Performance Monitor Driver
+ *
+ * Based on op_model_xscale.c
+ *
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 OProfile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Tony Lindgren <tony@atomide.com>
+ */
+
+/* #define DEBUG */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#include "op_counter.h"
+#include "op_arm_model.h"
+#include "op_model_arm11_core.h"
+
+static int irqs[] = {
+#ifdef CONFIG_ARCH_OMAP2
+ 3,
+#endif
+};
+
+static void armv6_pmu_stop(void)
+{
+ arm11_stop_pmu();
+ arm11_release_interrupts(irqs, ARRAY_SIZE(irqs));
+}
+
+static int armv6_pmu_start(void)
+{
+ int ret;
+
+ ret = arm11_request_interrupts(irqs, ARRAY_SIZE(irqs));
+ if (ret >= 0)
+ ret = arm11_start_pmu();
+
+ return ret;
+}
+
+static int armv6_detect_pmu(void)
+{
+ return 0;
+}
+
+struct op_arm_model_spec op_armv6_spec = {
+ .init = armv6_detect_pmu,
+ .num_counters = 3,
+ .setup_ctrs = arm11_setup_pmu,
+ .start = armv6_pmu_start,
+ .stop = armv6_pmu_stop,
+ .name = "arm/armv6",
+};