diff options
Diffstat (limited to 'arch/arm/plat-mxc')
49 files changed, 2853 insertions, 1457 deletions
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 8b0a1ee039f..7f7ad6f289b 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -9,38 +9,43 @@ choice config ARCH_MX1 bool "MX1-based" select CPU_ARM920T - select COMMON_CLKDEV + select IMX_HAVE_IOMUX_V1 help This enables support for systems based on the Freescale i.MX1 family config ARCH_MX2 bool "MX2-based" select CPU_ARM926T - select COMMON_CLKDEV + select IMX_HAVE_IOMUX_V1 help This enables support for systems based on the Freescale i.MX2 family config ARCH_MX25 bool "MX25-based" select CPU_ARM926T - select COMMON_CLKDEV + select ARCH_MXC_IOMUX_V3 + select HAVE_FB_IMX help This enables support for systems based on the Freescale i.MX25 family config ARCH_MX3 bool "MX3-based" select CPU_V6 - select COMMON_CLKDEV help This enables support for systems based on the Freescale i.MX3 family config ARCH_MXC91231 bool "MXC91231-based" select CPU_V6 - select COMMON_CLKDEV help This enables support for systems based on the Freescale MXC91231 family +config ARCH_MX5 + bool "MX5-based" + select CPU_V7 + help + This enables support for systems based on the Freescale i.MX51 family + endchoice source "arch/arm/mach-mx1/Kconfig" @@ -48,12 +53,12 @@ source "arch/arm/mach-mx2/Kconfig" source "arch/arm/mach-mx3/Kconfig" source "arch/arm/mach-mx25/Kconfig" source "arch/arm/mach-mxc91231/Kconfig" +source "arch/arm/mach-mx5/Kconfig" endmenu config MXC_IRQ_PRIOR bool "Use IRQ priority" - depends on ARCH_MXC help Select this if you want to use prioritized IRQ handling. This feature prevents higher priority ISR to be interrupted @@ -62,9 +67,16 @@ config MXC_IRQ_PRIOR requirements for timing. Say N here, unless you have a specialized requirement. +config MXC_TZIC + bool "Enable TrustZone Interrupt Controller" + depends on ARCH_MX51 + help + This will be automatically selected for all processors + containing this interrupt controller. + Say N here only if you are really sure. + config MXC_PWM tristate "Enable PWM driver" - depends on ARCH_MXC select HAVE_PWM help Enable support for the i.MX PWM controller(s). @@ -74,7 +86,9 @@ config MXC_ULPI config ARCH_HAS_RNGA bool - depends on ARCH_MXC + +config IMX_HAVE_IOMUX_V1 + bool config ARCH_MXC_IOMUX_V3 bool diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 6cee38df58b..895bc3c5e0c 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -5,8 +5,12 @@ # Common support obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o -obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o -obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o +# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o) +obj-$(CONFIG_MXC_TZIC) += tzic.o + +obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o +obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o +obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_PWM) += pwm.o obj-$(CONFIG_USB_EHCI_MXC) += ehci.o diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c index da6387dcdf2..b62917ca3f9 100644 --- a/arch/arm/plat-mxc/audmux-v1.c +++ b/arch/arm/plat-mxc/audmux-v1.c @@ -50,8 +50,18 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port); static int mxc_audmux_v1_init(void) { - if (cpu_is_mx27() || cpu_is_mx21()) - audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR); +#ifdef CONFIG_MACH_MX21 + if (cpu_is_mx21()) + audmux_base = MX21_IO_ADDRESS(MX21_AUDMUX_BASE_ADDR); + else +#endif +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) + audmux_base = MX27_IO_ADDRESS(MX27_AUDMUX_BASE_ADDR); + else +#endif + (void)0; + return 0; } diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index b06954a8443..d983cd6c788 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -190,7 +190,10 @@ static int mxc_audmux_v2_init(void) { int ret; - if (cpu_is_mx35()) { + if (cpu_is_mx31()) + audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR); + + else if (cpu_is_mx35()) { audmux_clk = clk_get(NULL, "audmux"); if (IS_ERR(audmux_clk)) { ret = PTR_ERR(audmux_clk); @@ -198,11 +201,9 @@ static int mxc_audmux_v2_init(void) ret); return ret; } + audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR); } - if (cpu_is_mx31() || cpu_is_mx35()) - audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR); - audmux_debugfs_init(); return 0; diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c index 9e8fbd57495..323ff8ccc87 100644 --- a/arch/arm/plat-mxc/clock.c +++ b/arch/arm/plat-mxc/clock.c @@ -56,6 +56,7 @@ static void __clk_disable(struct clk *clk) __clk_disable(clk->parent); __clk_disable(clk->secondary); + WARN_ON(!clk->usecount); if (!(--clk->usecount) && clk->disable) clk->disable(clk); } diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index 9c1b3f9c4f4..e16014b0d13 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -128,6 +128,18 @@ struct imx_dma_channel { int hw_chaining; }; +static void __iomem *imx_dmav1_baseaddr; + +static void imx_dmav1_writel(unsigned val, unsigned offset) +{ + __raw_writel(val, imx_dmav1_baseaddr + offset); +} + +static unsigned imx_dmav1_readl(unsigned offset) +{ + return __raw_readl(imx_dmav1_baseaddr + offset); +} + static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; static struct clk *dma_clk; @@ -140,7 +152,6 @@ static int imx_dma_hw_chain(struct imx_dma_channel *imxdma) return 0; } - /* * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation */ @@ -160,17 +171,17 @@ static inline int imx_dma_sg_next(int channel, struct scatterlist *sg) imxdma->resbytes -= now; if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ) - __raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel)); + imx_dmav1_writel(sg->dma_address, DMA_DAR(channel)); else - __raw_writel(sg->dma_address, DMA_BASE + DMA_SAR(channel)); + imx_dmav1_writel(sg->dma_address, DMA_SAR(channel)); - __raw_writel(now, DMA_BASE + DMA_CNTR(channel)); + imx_dmav1_writel(now, DMA_CNTR(channel)); pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, " "size 0x%08x\n", channel, - __raw_readl(DMA_BASE + DMA_DAR(channel)), - __raw_readl(DMA_BASE + DMA_SAR(channel)), - __raw_readl(DMA_BASE + DMA_CNTR(channel))); + imx_dmav1_readl(DMA_DAR(channel)), + imx_dmav1_readl(DMA_SAR(channel)), + imx_dmav1_readl(DMA_CNTR(channel))); return now; } @@ -218,27 +229,26 @@ imx_dma_setup_single(int channel, dma_addr_t dma_address, channel, __func__, (unsigned int)dma_address, dma_length, dev_addr); - __raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel)); - __raw_writel(dma_address, DMA_BASE + DMA_DAR(channel)); - __raw_writel(imxdma->ccr_from_device, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(dev_addr, DMA_SAR(channel)); + imx_dmav1_writel(dma_address, DMA_DAR(channel)); + imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel)); } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d " "dev_addr=0x%08x for write\n", channel, __func__, (unsigned int)dma_address, dma_length, dev_addr); - __raw_writel(dma_address, DMA_BASE + DMA_SAR(channel)); - __raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel)); - __raw_writel(imxdma->ccr_to_device, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(dma_address, DMA_SAR(channel)); + imx_dmav1_writel(dev_addr, DMA_DAR(channel)); + imx_dmav1_writel(imxdma->ccr_to_device, + DMA_CCR(channel)); } else { printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n", channel); return -EINVAL; } - __raw_writel(dma_length, DMA_BASE + DMA_CNTR(channel)); + imx_dmav1_writel(dma_length, DMA_CNTR(channel)); return 0; } @@ -316,17 +326,15 @@ imx_dma_setup_sg(int channel, "dev_addr=0x%08x for read\n", channel, __func__, sg, sgcount, dma_length, dev_addr); - __raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel)); - __raw_writel(imxdma->ccr_from_device, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(dev_addr, DMA_SAR(channel)); + imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel)); } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d " "dev_addr=0x%08x for write\n", channel, __func__, sg, sgcount, dma_length, dev_addr); - __raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel)); - __raw_writel(imxdma->ccr_to_device, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(dev_addr, DMA_DAR(channel)); + imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel)); } else { printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n", channel); @@ -360,7 +368,7 @@ imx_dma_config_channel(int channel, unsigned int config_port, imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq; imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq; - __raw_writel(dmareq, DMA_BASE + DMA_RSSR(channel)); + imx_dmav1_writel(dmareq, DMA_RSSR(channel)); return 0; } @@ -368,7 +376,7 @@ EXPORT_SYMBOL(imx_dma_config_channel); void imx_dma_config_burstlen(int channel, unsigned int burstlen) { - __raw_writel(burstlen, DMA_BASE + DMA_BLR(channel)); + imx_dmav1_writel(burstlen, DMA_BLR(channel)); } EXPORT_SYMBOL(imx_dma_config_burstlen); @@ -398,7 +406,7 @@ imx_dma_setup_handlers(int channel, } local_irq_save(flags); - __raw_writel(1 << channel, DMA_BASE + DMA_DISR); + imx_dmav1_writel(1 << channel, DMA_DISR); imxdma->irq_handler = irq_handler; imxdma->err_handler = err_handler; imxdma->data = data; @@ -462,22 +470,21 @@ void imx_dma_enable(int channel) local_irq_save(flags); - __raw_writel(1 << channel, DMA_BASE + DMA_DISR); - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) & ~(1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) | CCR_CEN | - CCR_ACRPT, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(1 << channel, DMA_DISR); + imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR); + imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN | + CCR_ACRPT, DMA_CCR(channel)); #ifdef CONFIG_ARCH_MX2 - if (imxdma->sg && imx_dma_hw_chain(imxdma)) { + if ((cpu_is_mx21() || cpu_is_mx27()) && + imxdma->sg && imx_dma_hw_chain(imxdma)) { imxdma->sg = sg_next(imxdma->sg); if (imxdma->sg) { u32 tmp; imx_dma_sg_next(channel, imxdma->sg); - tmp = __raw_readl(DMA_BASE + DMA_CCR(channel)); - __raw_writel(tmp | CCR_RPT | CCR_ACRPT, - DMA_BASE + DMA_CCR(channel)); + tmp = imx_dmav1_readl(DMA_CCR(channel)); + imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT, + DMA_CCR(channel)); } } #endif @@ -502,11 +509,10 @@ void imx_dma_disable(int channel) del_timer(&imxdma->watchdog); local_irq_save(flags); - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN, - DMA_BASE + DMA_CCR(channel)); - __raw_writel(1 << channel, DMA_BASE + DMA_DISR); + imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR); + imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN, + DMA_CCR(channel)); + imx_dmav1_writel(1 << channel, DMA_DISR); imxdma->in_use = 0; local_irq_restore(flags); } @@ -517,7 +523,7 @@ static void imx_dma_watchdog(unsigned long chno) { struct imx_dma_channel *imxdma = &imx_dma_channels[chno]; - __raw_writel(0, DMA_BASE + DMA_CCR(chno)); + imx_dmav1_writel(0, DMA_CCR(chno)); imxdma->in_use = 0; imxdma->sg = NULL; @@ -533,17 +539,17 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id) unsigned int err_mask; int errcode; - disr = __raw_readl(DMA_BASE + DMA_DISR); + disr = imx_dmav1_readl(DMA_DISR); - err_mask = __raw_readl(DMA_BASE + DMA_DBTOSR) | - __raw_readl(DMA_BASE + DMA_DRTOSR) | - __raw_readl(DMA_BASE + DMA_DSESR) | - __raw_readl(DMA_BASE + DMA_DBOSR); + err_mask = imx_dmav1_readl(DMA_DBTOSR) | + imx_dmav1_readl(DMA_DRTOSR) | + imx_dmav1_readl(DMA_DSESR) | + imx_dmav1_readl(DMA_DBOSR); if (!err_mask) return IRQ_HANDLED; - __raw_writel(disr & err_mask, DMA_BASE + DMA_DISR); + imx_dmav1_writel(disr & err_mask, DMA_DISR); for (i = 0; i < IMX_DMA_CHANNELS; i++) { if (!(err_mask & (1 << i))) @@ -551,20 +557,20 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id) imxdma = &imx_dma_channels[i]; errcode = 0; - if (__raw_readl(DMA_BASE + DMA_DBTOSR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DBTOSR); + if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) { + imx_dmav1_writel(1 << i, DMA_DBTOSR); errcode |= IMX_DMA_ERR_BURST; } - if (__raw_readl(DMA_BASE + DMA_DRTOSR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DRTOSR); + if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) { + imx_dmav1_writel(1 << i, DMA_DRTOSR); errcode |= IMX_DMA_ERR_REQUEST; } - if (__raw_readl(DMA_BASE + DMA_DSESR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DSESR); + if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) { + imx_dmav1_writel(1 << i, DMA_DSESR); errcode |= IMX_DMA_ERR_TRANSFER; } - if (__raw_readl(DMA_BASE + DMA_DBOSR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DBOSR); + if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) { + imx_dmav1_writel(1 << i, DMA_DBOSR); errcode |= IMX_DMA_ERR_BUFFER; } if (imxdma->name && imxdma->err_handler) { @@ -607,7 +613,7 @@ static void dma_irq_handle_channel(int chno) if (imxdma->sg) { imx_dma_sg_next(chno, imxdma->sg); - tmp = __raw_readl(DMA_BASE + DMA_CCR(chno)); + tmp = imx_dmav1_readl(DMA_CCR(chno)); if (imx_dma_hw_chain(imxdma)) { /* FIXME: The timeout should probably be @@ -617,15 +623,13 @@ static void dma_irq_handle_channel(int chno) jiffies + msecs_to_jiffies(500)); tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT; - __raw_writel(tmp, DMA_BASE + - DMA_CCR(chno)); + imx_dmav1_writel(tmp, DMA_CCR(chno)); } else { - __raw_writel(tmp & ~CCR_CEN, DMA_BASE + - DMA_CCR(chno)); + imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno)); tmp |= CCR_CEN; } - __raw_writel(tmp, DMA_BASE + DMA_CCR(chno)); + imx_dmav1_writel(tmp, DMA_CCR(chno)); if (imxdma->prog_handler) imxdma->prog_handler(chno, imxdma->data, @@ -640,7 +644,7 @@ static void dma_irq_handle_channel(int chno) } } - __raw_writel(0, DMA_BASE + DMA_CCR(chno)); + imx_dmav1_writel(0, DMA_CCR(chno)); imxdma->in_use = 0; if (imxdma->irq_handler) imxdma->irq_handler(chno, imxdma->data); @@ -651,15 +655,16 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) int i, disr; #ifdef CONFIG_ARCH_MX2 - dma_err_handler(irq, dev_id); + if (cpu_is_mx21() || cpu_is_mx27()) + dma_err_handler(irq, dev_id); #endif - disr = __raw_readl(DMA_BASE + DMA_DISR); + disr = imx_dmav1_readl(DMA_DISR); pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n", disr); - __raw_writel(disr, DMA_BASE + DMA_DISR); + imx_dmav1_writel(disr, DMA_DISR); for (i = 0; i < IMX_DMA_CHANNELS; i++) { if (disr & (1 << i)) dma_irq_handle_channel(i); @@ -699,17 +704,19 @@ int imx_dma_request(int channel, const char *name) local_irq_restore(flags); /* request_irq() can block */ #ifdef CONFIG_ARCH_MX2 - ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA", - NULL); - if (ret) { - imxdma->name = NULL; - printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n", - MXC_INT_DMACH0 + channel, channel); - return ret; + if (cpu_is_mx21() || cpu_is_mx27()) { + ret = request_irq(MX2x_INT_DMACH0 + channel, + dma_irq_handler, 0, "DMA", NULL); + if (ret) { + imxdma->name = NULL; + pr_crit("Can't register IRQ %d for DMA channel %d\n", + MX2x_INT_DMACH0 + channel, channel); + return ret; + } + init_timer(&imxdma->watchdog); + imxdma->watchdog.function = &imx_dma_watchdog; + imxdma->watchdog.data = channel; } - init_timer(&imxdma->watchdog); - imxdma->watchdog.function = &imx_dma_watchdog; - imxdma->watchdog.data = channel; #endif return ret; @@ -738,7 +745,8 @@ void imx_dma_free(int channel) imxdma->name = NULL; #ifdef CONFIG_ARCH_MX2 - free_irq(MXC_INT_DMACH0 + channel, NULL); + if (cpu_is_mx21() || cpu_is_mx27()) + free_irq(MX2x_INT_DMACH0 + channel, NULL); #endif local_irq_restore(flags); @@ -796,34 +804,53 @@ static int __init imx_dma_init(void) int ret = 0; int i; +#ifdef CONFIG_ARCH_MX1 + if (cpu_is_mx1()) + imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR); + else +#endif +#ifdef CONFIG_MACH_MX21 + if (cpu_is_mx21()) + imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR); + else +#endif +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) + imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR); + else +#endif + BUG(); + dma_clk = clk_get(NULL, "dma"); clk_enable(dma_clk); /* reset DMA module */ - __raw_writel(DCR_DRST, DMA_BASE + DMA_DCR); + imx_dmav1_writel(DCR_DRST, DMA_DCR); #ifdef CONFIG_ARCH_MX1 - ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n"); - return ret; - } + if (cpu_is_mx1()) { + ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL); + if (ret) { + pr_crit("Wow! Can't register IRQ for DMA\n"); + return ret; + } - ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n"); - free_irq(DMA_INT, NULL); - return ret; + ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL); + if (ret) { + pr_crit("Wow! Can't register ERRIRQ for DMA\n"); + free_irq(MX1_DMA_INT, NULL); + return ret; + } } #endif /* enable DMA module */ - __raw_writel(DCR_DEN, DMA_BASE + DMA_DCR); + imx_dmav1_writel(DCR_DEN, DMA_DCR); /* clear all interrupts */ - __raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DISR); + imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR); /* disable interrupts */ - __raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DIMR); + imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR); for (i = 0; i < IMX_DMA_CHANNELS; i++) { imx_dma_channels[i].sg = NULL; diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c index 41599be882e..cb0b6387448 100644 --- a/arch/arm/plat-mxc/ehci.c +++ b/arch/arm/plat-mxc/ehci.c @@ -25,25 +25,37 @@ #define USBCTRL_OTGBASE_OFFSET 0x600 #define MX31_OTG_SIC_SHIFT 29 -#define MX31_OTG_SIC_MASK (0xf << MX31_OTG_SIC_SHIFT) +#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT) #define MX31_OTG_PM_BIT (1 << 24) #define MX31_H2_SIC_SHIFT 21 -#define MX31_H2_SIC_MASK (0xf << MX31_H2_SIC_SHIFT) +#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT) #define MX31_H2_PM_BIT (1 << 16) #define MX31_H2_DT_BIT (1 << 5) #define MX31_H1_SIC_SHIFT 13 -#define MX31_H1_SIC_MASK (0xf << MX31_H1_SIC_SHIFT) +#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT) #define MX31_H1_PM_BIT (1 << 8) #define MX31_H1_DT_BIT (1 << 4) +#define MX35_OTG_SIC_SHIFT 29 +#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT) +#define MX35_OTG_PM_BIT (1 << 24) + +#define MX35_H1_SIC_SHIFT 21 +#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) +#define MX35_H1_PM_BIT (1 << 8) +#define MX35_H1_IPPUE_UP_BIT (1 << 7) +#define MX35_H1_IPPUE_DOWN_BIT (1 << 6) +#define MX35_H1_TLL_BIT (1 << 5) +#define MX35_H1_USBTE_BIT (1 << 4) + int mxc_set_usbcontrol(int port, unsigned int flags) { unsigned int v; - +#ifdef CONFIG_ARCH_MX3 if (cpu_is_mx31()) { - v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR + + v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); switch (port) { @@ -51,15 +63,15 @@ int mxc_set_usbcontrol(int port, unsigned int flags) v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT; - if (flags & MXC_EHCI_POWER_PINS_ENABLED) + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX31_OTG_PM_BIT; break; case 1: /* H1 port */ - v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT); + v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT; - if (flags & MXC_EHCI_POWER_PINS_ENABLED) + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX31_H1_PM_BIT; if (!(flags & MXC_EHCI_TTL_ENABLED)) @@ -67,7 +79,7 @@ int mxc_set_usbcontrol(int port, unsigned int flags) break; case 2: /* H2 port */ - v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT); + v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) @@ -77,13 +89,103 @@ int mxc_set_usbcontrol(int port, unsigned int flags) v |= MX31_H2_DT_BIT; break; + default: + return -EINVAL; } - writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR + + writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); return 0; } + if (cpu_is_mx35()) { + v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX35_OTG_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT | + MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX35_H1_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX35_H1_TLL_BIT; + + if (flags & MXC_EHCI_INTERNAL_PHY) + v |= MX35_H1_USBTE_BIT; + + if (flags & MXC_EHCI_IPPUE_DOWN) + v |= MX35_H1_IPPUE_DOWN_BIT; + + if (flags & MXC_EHCI_IPPUE_UP) + v |= MX35_H1_IPPUE_UP_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + return 0; + } +#endif /* CONFIG_ARCH_MX3 */ +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) { + /* On i.MX27 we can use the i.MX31 USBCTRL bits, they + * are identical + */ + v = readl(MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + switch (port) { + case 0: /* OTG port */ + v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_OTG_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_OTG_PM_BIT; + break; + case 1: /* H1 port */ + v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_H1_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H1_DT_BIT; + + break; + case 2: /* H2 port */ + v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_H2_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H2_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H2_DT_BIT; + + break; + default: + return -EINVAL; + } + writel(v, MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + return 0; + } +#endif /* CONFIG_MACH_MX27 */ printk(KERN_WARNING "%s() unable to setup USBCONTROL for this CPU\n", __func__); return -EINVAL; diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index d65ebe303b9..70b23893f09 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -140,16 +140,13 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) val = __raw_readl(reg); edge = (val >> (bit << 1)) & 3; val &= ~(0x3 << (bit << 1)); - switch (edge) { - case GPIO_INT_HIGH_LEV: + if (edge == GPIO_INT_HIGH_LEV) { edge = GPIO_INT_LOW_LEV; pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); - break; - case GPIO_INT_LOW_LEV: + } else if (edge == GPIO_INT_LOW_LEV) { edge = GPIO_INT_HIGH_LEV; pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); - break; - default: + } else { pr_err("mxc: invalid configuration for GPIO %d: %x\n", gpio, edge); return; @@ -157,25 +154,20 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) __raw_writel(val | (edge << (bit << 1)), reg); } -/* handle n interrupts in one status register */ +/* handle 32 interrupts in one status register */ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) { - u32 gpio_irq_no; + u32 gpio_irq_no_base = port->virtual_irq_start; - gpio_irq_no = port->virtual_irq_start; - for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) { - u32 gpio = irq_to_gpio(gpio_irq_no); - - if ((irq_stat & 1) == 0) - continue; + while (irq_stat != 0) { + int irqoffset = fls(irq_stat) - 1; - BUG_ON(!(irq_desc[gpio_irq_no].handle_irq)); + if (port->both_edges & (1 << irqoffset)) + mxc_flip_edge(port, irqoffset); - if (port->both_edges & (1 << (gpio & 31))) - mxc_flip_edge(port, gpio); + generic_handle_irq(gpio_irq_no_base + irqoffset); - irq_desc[gpio_irq_no].handle_irq(gpio_irq_no, - &irq_desc[gpio_irq_no]); + irq_stat &= ~(1 << irqoffset); } } diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h index 05ff2f31ef1..93cc66f104c 100644 --- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h +++ b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h @@ -21,19 +21,19 @@ /* * KZM-ARM11-01 Board Control Registers on FPGA */ -#define KZM_ARM11_CTL1 (CS4_BASE_ADDR + 0x1000) -#define KZM_ARM11_CTL2 (CS4_BASE_ADDR + 0x1001) -#define KZM_ARM11_RSW1 (CS4_BASE_ADDR + 0x1002) -#define KZM_ARM11_BACK_LIGHT (CS4_BASE_ADDR + 0x1004) -#define KZM_ARM11_FPGA_REV (CS4_BASE_ADDR + 0x1008) -#define KZM_ARM11_7SEG_LED (CS4_BASE_ADDR + 0x1010) -#define KZM_ARM11_LEDS (CS4_BASE_ADDR + 0x1020) -#define KZM_ARM11_DIPSW2 (CS4_BASE_ADDR + 0x1003) +#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000) +#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001) +#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002) +#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004) +#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008) +#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010) +#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020) +#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003) /* * External UART for touch panel on FPGA */ -#define KZM_ARM11_16550 (CS4_BASE_ADDR + 0x1050) +#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050) #endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h index 2cbfa35e82f..095a199591c 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h @@ -14,7 +14,7 @@ #include <mach/hardware.h> /* Base address of PBC controller */ -#define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR) +#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT /* Offsets for the PBC Controller register */ /* PBC Board status register offset */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h index d5be6b5a6ac..fc5fec9b55f 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h @@ -25,6 +25,7 @@ enum mx31moboard_boards { MX31NOBOARD = 0, MX31DEVBOARD = 1, MX31MARXBOT = 2, + MX31SMARTBOT = 3, }; /* @@ -34,6 +35,7 @@ enum mx31moboard_boards { extern void mx31moboard_devboard_init(void); extern void mx31moboard_marxbot_init(void); +extern void mx31moboard_smartbot_init(void); #endif diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h index 43a82d0c534..753a5988d85 100644 --- a/arch/arm/plat-mxc/include/mach/clock.h +++ b/arch/arm/plat-mxc/include/mach/clock.h @@ -26,13 +26,6 @@ struct module; struct clk { -#ifndef CONFIG_COMMON_CLKDEV - /* As soon as i.MX1 and i.MX31 switched to clkdev, this - * block can go away */ - struct list_head node; - struct module *owner; - const char *name; -#endif int id; /* Source clock this clk depends on */ struct clk *parent; diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 4bf1068ffad..2941472582d 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -20,14 +20,17 @@ extern void mx25_map_io(void); extern void mx27_map_io(void); extern void mx31_map_io(void); extern void mx35_map_io(void); +extern void mx51_map_io(void); extern void mxc91231_map_io(void); extern void mxc_init_irq(void __iomem *); +extern void tzic_init_irq(void __iomem *); extern void mx1_init_irq(void); extern void mx21_init_irq(void); extern void mx25_init_irq(void); extern void mx27_init_irq(void); extern void mx31_init_irq(void); extern void mx35_init_irq(void); +extern void mx51_init_irq(void); extern void mxc91231_init_irq(void); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); @@ -36,6 +39,8 @@ extern int mx25_clocks_init(void); extern int mx27_clocks_init(unsigned long fref); extern int mx31_clocks_init(unsigned long fref); extern int mx35_clocks_init(void); +extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, + unsigned long ckih1, unsigned long ckih2); extern int mxc91231_clocks_init(unsigned long fref); extern int mxc_register_gpios(void); extern int mxc_register_device(struct platform_device *pdev, void *data); diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 5a6ae1b9e1e..0b6e11eaeb8 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -10,6 +10,7 @@ * published by the Free Software Foundation. * */ +#define IMX_NEEDS_DEPRECATED_SYMBOLS #ifdef CONFIG_ARCH_MX1 #include <mach/mx1.h> @@ -44,13 +45,22 @@ #define UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) #endif +#ifdef CONFIG_ARCH_MX5 +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#include <mach/mx51.h> +#define UART_PADDR MX51_UART1_BASE_ADDR +#define UART_VADDR MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR) +#endif + #ifdef CONFIG_ARCH_MXC91231 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #include <mach/mxc91231.h> #define UART_PADDR MXC91231_UART2_BASE_ADDR -#define UART_VADDR MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR) +#define UART_VADDR MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR) #endif .macro addruart, rx, tmp mrc p15, 0, \rx, c1, c0 diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index 7cf290efe76..aeb08697726 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -1,6 +1,6 @@ /* * Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org> - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. */ /* @@ -18,11 +18,16 @@ .endm .macro get_irqnr_preamble, base, tmp +#ifndef CONFIG_MXC_TZIC ldr \base, =avic_base ldr \base, [\base] #ifdef CONFIG_MXC_IRQ_PRIOR ldr r4, [\base, #AVIC_NIMASK] #endif +#elif defined CONFIG_MXC_TZIC + ldr \base, =tzic_base + ldr \base, [\base] +#endif /* CONFIG_MXC_TZIC */ .endm .macro arch_ret_to_user, tmp1, tmp2 @@ -32,6 +37,7 @@ @ and returns its number in irqnr @ and returns if an interrupt occured in irqstat .macro get_irqnr_and_base, irqnr, irqstat, base, tmp +#ifndef CONFIG_MXC_TZIC @ Load offset & priority of the highest priority @ interrupt pending from AVIC_NIVECSR ldr \irqstat, [\base, #0x40] @@ -45,6 +51,32 @@ strne \tmp, [\base, #AVIC_NIMASK] streq r4, [\base, #AVIC_NIMASK] #endif +#elif defined CONFIG_MXC_TZIC + @ Load offset & priority of the highest priority + @ interrupt pending. + @ 0xD80 is HIPND0 register + mov \irqnr, #0 + mov \irqstat, #0x0D80 +1000: + ldr \tmp, [\irqstat, \base] + cmp \tmp, #0 + bne 1001f + addeq \irqnr, \irqnr, #32 + addeq \irqstat, \irqstat, #4 + cmp \irqnr, #128 + blo 1000b + b 2001f +1001: mov \irqstat, #1 +1002: tst \tmp, \irqstat + bne 2002f + movs \tmp, \tmp, lsr #1 + addne \irqnr, \irqnr, #1 + bne 1002b +2001: + mov \irqnr, #0 +2002: + movs \irqnr, \irqnr +#endif .endm @ irq priority table (not used) diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index 78db75475f6..ebadf4ac43f 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -22,6 +22,15 @@ #include <asm/sizes.h> +#define IMX_IO_ADDRESS(addr, module) \ + ((void __force __iomem *) \ + (((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\ + (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0)) + +#ifdef CONFIG_ARCH_MX5 +#include <mach/mx51.h> +#endif + #ifdef CONFIG_ARCH_MX3 #include <mach/mx3x.h> #include <mach/mx31.h> diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/plat-mxc/include/mach/iomux-mx1.h index bf23305c19c..6b1507cf378 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx1.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx1.h @@ -1,166 +1,155 @@ /* -* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX1_H__ +#define __MACH_IOMUX_MX1_H__ -#ifndef _MXC_IOMUX_MX1_H -#define _MXC_IOMUX_MX1_H +#include <mach/iomux-v1.h> -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif +#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) +#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) +#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1) +#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) +#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2) +#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) +#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) +#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) +#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) +#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) +#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) +#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) +#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) +#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) +#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) +#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) +#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) +#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) +#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) +#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) +#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) +#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) +#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) +#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) +#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) +#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) +#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) +#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) +#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) +#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) +#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) +#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) +#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) +#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) +#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) +#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) +#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) +#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) +#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) +#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) +#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) +#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) +#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) +#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) +#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) +#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) +#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) +#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) +#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) +#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) +#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) +#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) +#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) +#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) +#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) +#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) +#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) +#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_AF | GPIO_IN | 16) +#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17) +#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) +#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) +#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) +#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) +#define PB22_PF_USBD_RCV (GPIO_PORTB | GPIO_PF | 22) +#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) +#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) +#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) +#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) +#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) +#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28) +#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_PF | GPIO_IN | 29) +#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30) +#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_PF | GPIO_IN | 31) +#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) +#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) +#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) +#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6) +#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) +#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) +#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) +#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_PF | GPIO_IN | 10) +#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) +#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 12) +#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) +#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) +#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) +#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) +#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) +#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24) +#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25) +#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26) +#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27) +#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28) +#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29) +#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30) +#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31) +#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6) +#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) +#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_AF | GPIO_IN | 7) +#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7) +#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) +#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8) +#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8) +#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) +#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9) +#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9) +#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10) +#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10) +#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10) +#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11) +#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12) +#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13) +#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14) +#define PD15_PF_LD0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15) +#define PD16_PF_LD1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16) +#define PD17_PF_LD2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) +#define PD18_PF_LD3 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) +#define PD19_PF_LD4 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19) +#define PD20_PF_LD5 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20) +#define PD21_PF_LD6 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21) +#define PD22_PF_LD7 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22) +#define PD23_PF_LD8 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23) +#define PD24_PF_LD9 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24) +#define PD25_PF_LD10 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) +#define PD26_PF_LD11 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) +#define PD27_PF_LD12 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) +#define PD28_PF_LD13 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) +#define PD29_PF_LD14 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) +#define PD30_PF_LD15 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30) +#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) +#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31) -/* FIXME: This list is not completed. The correct directions are -* missing on some (many) pins -*/ - - -/* Primary GPIO pin functions */ - -#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) -#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) -#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1) -#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2) -#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) -#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) -#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) -#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) -#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) -#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) -#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) -#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) -#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) -#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) -#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) -#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) -#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) -#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) -#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) -#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) -#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) -#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) -#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) -#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) -#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) -#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) -#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) -#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) -#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) -#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) -#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) -#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) -#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) -#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) -#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) -#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) -#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) -#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) -#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) -#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) -#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) -#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) -#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) -#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) -#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) -#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) -#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) -#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) -#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) -#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) -#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) -#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) -#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) -#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) -#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) -#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_AF | GPIO_IN | 16) -#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17) -#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) -#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) -#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) -#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) -#define PB22_PF_USBD_RCV (GPIO_PORTB | GPIO_PF | 22) -#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) -#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) -#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28) -#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_PF | GPIO_IN | 29) -#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30) -#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_PF | GPIO_IN | 31) -#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) -#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) -#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) -#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6) -#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) -#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) -#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) -#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_PF | GPIO_IN | 10) -#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) -#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 12) -#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) -#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) -#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) -#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) -#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) -#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24) -#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25) -#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26) -#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27) -#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28) -#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29) -#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30) -#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31) -#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6) -#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) -#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_AF | GPIO_IN | 7) -#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7) -#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) -#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8) -#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8) -#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) -#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9) -#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9) -#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10) -#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10) -#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10) -#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11) -#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12) -#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13) -#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14) -#define PD15_PF_LD0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15) -#define PD16_PF_LD1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16) -#define PD17_PF_LD2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) -#define PD18_PF_LD3 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) -#define PD19_PF_LD4 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19) -#define PD20_PF_LD5 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20) -#define PD21_PF_LD6 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21) -#define PD22_PF_LD7 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22) -#define PD23_PF_LD8 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23) -#define PD24_PF_LD9 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24) -#define PD25_PF_LD10 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) -#define PD26_PF_LD11 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) -#define PD27_PF_LD12 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) -#define PD28_PF_LD13 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) -#define PD29_PF_LD14 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) -#define PD30_PF_LD15 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30) -#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) -#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31) - - -#endif +#endif /* ifndef __MACH_IOMUX_MX1_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/plat-mxc/include/mach/iomux-mx21.h index 63aaa972e27..1495dfda783 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx21.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx21.h @@ -1,126 +1,122 @@ /* -* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ - -#ifndef _MXC_IOMUX_MX21_H -#define _MXC_IOMUX_MX21_H - -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif - + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX21_H__ +#define __MACH_IOMUX_MX21_H__ + +#include <mach/iomux-mx2x.h> +#include <mach/iomux-v1.h> /* Primary GPIO pin functions */ -#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22) -#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25) -#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5) -#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6) -#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7) -#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8) -#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9) -#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10) -#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11) -#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12) -#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13) -#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16) -#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17) -#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18) -#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19) -#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0) -#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1) -#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2) -#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1) -#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3) -#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7) -#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8) -#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9) -#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10) -#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11) -#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12) -#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13) -#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14) -#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16) +#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22) +#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25) +#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5) +#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6) +#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7) +#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8) +#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9) +#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10) +#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11) +#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12) +#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13) +#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16) +#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17) +#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18) +#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19) +#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0) +#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1) +#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2) +#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1) +#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3) +#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7) +#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8) +#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9) +#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10) +#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11) +#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12) +#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13) +#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14) +#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16) /* Alternate GPIO pin functions */ -#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5) -#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6) -#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7) -#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8) -#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9) -#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10) -#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11) -#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12) -#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13) -#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14) -#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15) -#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16) -#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17) -#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18) -#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19) -#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20) -#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21) -#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22) -#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23) -#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29) -#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30) +#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5) +#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6) +#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7) +#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8) +#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9) +#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10) +#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11) +#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12) +#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13) +#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14) +#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15) +#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16) +#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17) +#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18) +#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19) +#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20) +#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21) +#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22) +#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23) +#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29) +#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30) /* AIN GPIO pin functions */ -#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) -#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21) -#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22) -#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23) -#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24) -#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8) -#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0) -#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1) -#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2) -#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3) -#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4) -#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5) +#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) +#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21) +#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22) +#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23) +#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24) +#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8) +#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0) +#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1) +#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2) +#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3) +#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4) +#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5) /* BIN GPIO pin functions */ -#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) -#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27) +#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) +#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27) /* CIN GPIO pin functions */ -#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26) +#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26) /* AOUT GPIO pin functions */ -#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29) -#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19) -#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20) -#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25) -#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26) -#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9) -#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6) -#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7) -#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8) -#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9) -#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10) -#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11) -#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12) -#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13) -#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14) - - -#endif +#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29) +#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19) +#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20) +#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25) +#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26) +#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9) +#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6) +#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7) +#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8) +#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9) +#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10) +#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11) +#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12) +#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13) +#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14) + +#endif /* ifndef __MACH_IOMUX_MX21_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index 9af494f0ab3..f39220d1b67 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -7,7 +7,7 @@ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. * and * arch/arm/plat-mxc/include/mach/iomux-mx35.h - * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -16,24 +16,11 @@ * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ -#ifndef __IOMUX_MX25_H__ -#define __IOMUX_MX25_H__ +#ifndef __MACH_IOMUX_MX25_H__ +#define __MACH_IOMUX_MX25_H__ #include <mach/iomux-v3.h> -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif - -/* - * - * @brief MX25 I/O Pin List - * - * @ingroup GPIO_MX25 - */ - -#ifndef __ASSEMBLY__ - /* * IOMUX/PAD Bit field definitions */ @@ -462,9 +449,11 @@ #define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP) #define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, NO_PAD_CTRL) #define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP) #define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, NO_PAD_CTRL) #define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL) #define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL) @@ -513,5 +502,4 @@ #define MX25_PAD_CTL_GRP_DVS_SDHC1 IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CTL_GRP_DVS_LCD IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL) -#endif // __ASSEMBLY__ -#endif // __IOMUX_MX25_H__ +#endif /* __MACH_IOMUX_MX25_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/plat-mxc/include/mach/iomux-mx27.h index 5ac158b70f6..d9f9a6e32d8 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx27.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx27.h @@ -1,207 +1,205 @@ /* -* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> -* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ - -#ifndef _MXC_IOMUX_MX27_H -#define _MXC_IOMUX_MX27_H - -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif - + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX27_H__ +#define __MACH_IOMUX_MX27_H__ + +#include <mach/iomux-mx2x.h> +#include <mach/iomux-v1.h> /* Primary GPIO pin functions */ -#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0) -#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2) -#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4) -#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22) -#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25) -#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) -#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6) -#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7) -#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8) -#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) -#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10) -#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) -#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12) -#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13) -#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16) -#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17) -#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18) -#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19) -#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25) -#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27) -#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0) -#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1) -#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2) -#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3) -#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4) -#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5) -#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6) -#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7) -#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8) -#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9) -#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10) -#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11) -#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12) -#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13) -#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14) -#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15) -#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16) -#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0) -#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1) -#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2) -#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24) -#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25) -#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1) -#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3) -#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7) -#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8) -#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9) -#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10) -#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11) -#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12) -#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13) -#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14) -#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16) -#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17) -#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18) -#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19) -#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20) -#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23) +#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0) +#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1) +#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2) +#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3) +#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4) +#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22) +#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25) +#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) +#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6) +#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7) +#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8) +#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) +#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10) +#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) +#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12) +#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13) +#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16) +#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17) +#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18) +#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19) +#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0) +#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1) +#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2) +#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3) +#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4) +#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5) +#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6) +#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7) +#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8) +#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9) +#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10) +#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11) +#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12) +#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13) +#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14) +#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15) +#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16) +#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0) +#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1) +#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2) +#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24) +#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25) +#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1) +#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3) +#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7) +#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8) +#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9) +#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10) +#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11) +#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12) +#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13) +#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14) +#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16) +#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17) +#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18) +#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19) +#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20) +#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23) /* Alternate GPIO pin functions */ -#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4) -#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5) -#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6) -#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7) -#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8) -#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9) -#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10) -#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11) -#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12) -#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13) -#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18) -#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19) -#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20) -#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21) -#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8) -#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24) -#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26) -#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1) -#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6) -#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7) -#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9) -#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2) -#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3) -#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4) -#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5) -#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8) -#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10) -#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11) -#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12) -#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13) -#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14) -#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15) -#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16) -#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1) -#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3) -#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5) -#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7) -#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8) -#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9) -#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10) -#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11) -#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12) -#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13) -#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14) -#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15) -#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16) -#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17) -#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18) -#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19) -#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20) -#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22) -#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23) +#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4) +#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5) +#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6) +#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7) +#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8) +#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9) +#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10) +#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11) +#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12) +#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13) +#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18) +#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19) +#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20) +#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21) +#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8) +#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24) +#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25) +#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26) +#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27) +#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1) +#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6) +#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7) +#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9) +#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2) +#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3) +#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4) +#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5) +#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8) +#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10) +#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11) +#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12) +#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13) +#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14) +#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15) +#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16) +#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1) +#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3) +#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5) +#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7) +#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8) +#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9) +#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10) +#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11) +#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12) +#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13) +#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14) +#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15) +#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16) +#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17) +#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18) +#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19) +#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20) +#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22) +#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23) /* AIN GPIO pin functions */ -#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) -#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15) -#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0) -#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1) -#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2) -#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3) -#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9) -#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16) -#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27) -#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23) +#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) +#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15) +#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0) +#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1) +#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2) +#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3) +#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9) +#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16) +#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27) +#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23) /* BIN GPIO pin functions */ -#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) +#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) /* CIN GPIO pin functions */ -#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2) -#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3) -#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4) -#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5) -#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6) -#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7) -#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8) -#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9) -#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10) -#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11) -#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12) -#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13) -#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14) -#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15) -#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16) -#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23) -#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27) +#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2) +#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3) +#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4) +#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5) +#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6) +#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7) +#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8) +#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9) +#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10) +#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11) +#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12) +#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13) +#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14) +#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15) +#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16) +#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23) +#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27) /* LCDC_TESTx on PBxx omitted, because it's not clear what they do */ /* AOUT GPIO pin functions */ -#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14) -#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4) -#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5) -#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6) -#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7) -#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10) -#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11) -#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12) -#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13) -#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14) -#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15) - -#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17) -#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18) -#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19) -#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28) -#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29) -#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30) -#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31) - - -#endif /* _MXC_GPIO_MX1_MX2_H */ +#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14) +#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4) +#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5) +#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6) +#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7) +#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10) +#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11) +#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12) +#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13) +#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14) +#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15) + +/* BOUT GPIO pin functions */ + +#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17) +#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18) +#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19) +#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28) +#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29) +#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30) +#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31) + +#endif /* __MACH_IOMUX_MX27_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h index fb5ae638e79..c4f116d214f 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h @@ -1,237 +1,230 @@ /* -* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> -* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ - -#ifndef _MXC_IOMUX_MX2x_H -#define _MXC_IOMUX_MX2x_H - -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif - + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX2x_H__ +#define __MACH_IOMUX_MX2x_H__ /* Primary GPIO pin functions */ -#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5) -#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6) -#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7) -#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8) -#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9) -#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10) -#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11) -#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12) -#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13) -#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14) -#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) -#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) -#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17) -#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18) -#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19) -#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20) -#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21) -#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22) -#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23) -#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24) -#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25) -#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26) -#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27) -#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28) -#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29) -#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30) -#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31) -#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4) -#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5) -#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6) -#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7) -#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8) -#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9) -#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10) -#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11) -#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12) -#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13) -#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14) -#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15) -#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16) -#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17) -#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18) -#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19) -#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20) -#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21) -#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24) -#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28) -#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29) -#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30) -#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31) -#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14) -#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15) -#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20) -#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21) -#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22) -#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23) -#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24) -#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25) -#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26) -#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27) -#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28) -#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29) -#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30) -#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31) -#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) -#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) -#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19) -#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20) -#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21) -#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22) -#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23) -#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24) -#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) -#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) -#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) -#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) -#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) -#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30) -#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31) -#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3) -#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4) -#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5) -#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6) -#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7) -#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8) -#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9) -#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10) -#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11) -#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12) -#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13) -#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14) -#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15) -#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16) -#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17) -#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18) -#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19) -#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20) -#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21) -#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22) -#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23) -#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0) -#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2) -#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4) -#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5) -#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6) -#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15) -#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21) -#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22) +#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5) +#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6) +#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7) +#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8) +#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9) +#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10) +#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11) +#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12) +#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13) +#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14) +#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) +#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) +#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17) +#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18) +#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19) +#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20) +#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21) +#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22) +#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23) +#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24) +#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25) +#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26) +#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27) +#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28) +#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29) +#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30) +#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31) +#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4) +#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5) +#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6) +#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7) +#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8) +#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9) +#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10) +#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11) +#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12) +#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13) +#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14) +#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15) +#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16) +#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17) +#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18) +#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19) +#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20) +#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21) +#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23) +#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24) +#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26) +#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27) +#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28) +#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29) +#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30) +#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31) +#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14) +#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15) +#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20) +#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21) +#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22) +#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23) +#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24) +#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25) +#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26) +#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27) +#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28) +#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29) +#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30) +#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31) +#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) +#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) +#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19) +#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20) +#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21) +#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22) +#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23) +#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24) +#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) +#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) +#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) +#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) +#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) +#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30) +#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31) +#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3) +#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4) +#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5) +#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6) +#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7) +#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8) +#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9) +#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10) +#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11) +#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12) +#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13) +#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14) +#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15) +#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16) +#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17) +#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18) +#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19) +#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20) +#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21) +#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22) +#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23) +#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0) +#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2) +#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4) +#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5) +#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6) +#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15) +#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21) +#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22) /* Alternate GPIO pin functions */ -#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26) -#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28) -#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29) -#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31) -#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28) -#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29) -#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30) -#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31) -#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19) -#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20) -#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21) -#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22) -#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23) -#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24) -#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26) -#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0) -#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1) -#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2) -#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3) -#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4) -#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6) -#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7) -#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16) -#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18) -#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21) -#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22) -#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23) +#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26) +#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28) +#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29) +#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31) +#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28) +#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29) +#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30) +#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31) +#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19) +#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20) +#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21) +#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22) +#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23) +#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24) +#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26) +#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0) +#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1) +#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2) +#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3) +#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4) +#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6) +#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7) +#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16) +#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18) +#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21) +#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22) +#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23) /* AIN GPIO pin functions */ -#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6) -#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7) -#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8) -#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) -#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11) -#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13) -#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15) -#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) -#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19) -#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21) -#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22) -#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24) -#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25) -#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26) -#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27) -#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6) -#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7) -#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8) -#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9) -#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25) -#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26) -#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27) -#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28) -#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29) -#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30) -#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31) -#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5) -#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6) -#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7) -#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8) -#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9) -#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10) -#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11) -#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12) -#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13) -#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5) +#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6) +#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7) +#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8) +#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) +#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11) +#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13) +#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15) +#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) +#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19) +#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21) +#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22) +#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24) +#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25) +#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26) +#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27) +#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6) +#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7) +#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8) +#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9) +#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25) +#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26) +#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27) +#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28) +#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29) +#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30) +#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31) +#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5) +#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6) +#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7) +#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8) +#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9) +#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10) +#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11) +#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12) +#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13) +#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5) /* BIN GPIO pin functions */ -#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5) +#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5) /* CIN GPIO pin functions */ -#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14) -#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15) -#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16) -#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17) -#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18) -#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19) -#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20) -#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21) -#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30) -#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5) +#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14) +#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15) +#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16) +#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17) +#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18) +#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19) +#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20) +#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21) +#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30) +#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5) /* AOUT GPIO pin functions */ -#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29) -#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31) +#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29) +#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31) #define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8) -#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15) -#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21) - +#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15) +#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21) -#endif +#endif /* ifndef __MACH_IOMUX_MX2x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index e1fc6da1cd1..e51465d7b22 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -16,12 +16,10 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. */ - -#ifndef __MACH_MX31_IOMUX_H__ -#define __MACH_MX31_IOMUX_H__ +#ifndef __MACH_IOMUX_MX3_H__ +#define __MACH_IOMUX_MX3_H__ #include <linux/types.h> - /* * various IOMUX output functions */ @@ -34,7 +32,7 @@ #define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */ #define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */ #define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */ -#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ +#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ #define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */ #define IOMUX_ICONFIG_FUNC 2 /* used as function */ #define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */ @@ -167,11 +165,6 @@ int mxc_iomux_mode(unsigned int pin_mode); MXC_GPIO_IRQ_START) /* - * The number of gpio devices among the pads - */ -#define GPIO_PORT_MAX 3 - -/* * This enumeration is constructed based on the Section * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated * value is constructed based on the rules described above. @@ -633,40 +626,40 @@ enum iomux_pins { #define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) #define MX31_PIN_CSI_D4__GPIO3_4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO) #define MX31_PIN_CSI_D5__GPIO3_5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO) -#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1) #define MX31_PIN_SFS6__USBH1_SUSPEND IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC) #define MX31_PIN_NFRE_B__GPIO1_11 IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO) #define MX31_PIN_NFALE__GPIO1_12 IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO) -#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC) #define MX31_PIN_STXD3__USBH2_DATA2 IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC) #define MX31_PIN_SRXD3__USBH2_DATA3 IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC) #define MX31_PIN_SCK3__USBH2_DATA4 IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC) #define MX31_PIN_SFS3__USBH2_DATA5 IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC) #define MX31_PIN_STXD6__USBH2_DATA6 IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC) #define MX31_PIN_SRXD6__USBH2_DATA7 IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC) #define MX31_PIN_SCK6__GPIO1_25 IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO) #define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO) #define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) @@ -711,8 +704,8 @@ enum iomux_pins { #define MX31_PIN_DSR_DCE1__GPIO2_9 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO) #define MX31_PIN_RI_DCE1__GPIO2_10 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO) #define MX31_PIN_DCD_DCE1__GPIO2_11 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO) -#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO) +#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO) +#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO) #define MX31_PIN_GPIO1_3__GPIO1_3 IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO) #define MX31_PIN_CSPI2_SS1__CSPI3_SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1) #define MX31_PIN_RTS1__GPIO2_6 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO) @@ -727,13 +720,14 @@ enum iomux_pins { #define MX31_PIN_SCK5__SCK5 IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC) #define MX31_PIN_SFS5__SFS5 IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC) -/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 - * cspi1_ss1*/ +/* + * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0, + * cspi2_ss1, cspi1_ss0 cspi1_ss1 + */ /* * This function configures the pad value for a IOMUX pin. */ void mxc_iomux_set_pad(enum iomux_pins, u32); -#endif - +#endif /* ifndef __MACH_IOMUX_MX3_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h index c88d40795f7..2a24bae1b87 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h @@ -1,5 +1,5 @@ /* - * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h new file mode 100644 index 00000000000..b4f975e6a66 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -0,0 +1,326 @@ +/* + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __MACH_IOMUX_MX51_H__ +#define __MACH_IOMUX_MX51_H__ + +#include <mach/iomux-v3.h> + +/* + * various IOMUX alternate output functions (1-7) + */ +typedef enum iomux_config { + IOMUX_CONFIG_ALT0, + IOMUX_CONFIG_ALT1, + IOMUX_CONFIG_ALT2, + IOMUX_CONFIG_ALT3, + IOMUX_CONFIG_ALT4, + IOMUX_CONFIG_ALT5, + IOMUX_CONFIG_ALT6, + IOMUX_CONFIG_ALT7, + IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */ + IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */ +} iomux_pin_cfg_t; + +/* Pad control groupings */ +#define MX51_UART1_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_DSE_HIGH) +#define MX51_UART2_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) +#define MX51_UART3_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) + +/* + * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named + * GPIO_<unit>_<num> see also iomux-v3.h + */ + +/* + * FIXME: This was converted using scripts from existing Freescale code to + * this form used upstream. Need to verify the name format. + */ + +/* PAD MUX ALT INPSE PATH PADCTRL */ + +#define MX51_PAD_GPIO_2_0__EIM_D16 IOMUX_PAD(0x3f0, 0x05c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_1__EIM_D17 IOMUX_PAD(0x3f4, 0x060, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_2__EIM_D18 IOMUX_PAD(0x3f8, 0x064, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_3__EIM_D19 IOMUX_PAD(0x3fc, 0x068, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_4__EIM_D20 IOMUX_PAD(0x400, 0x06c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_5__EIM_D21 IOMUX_PAD(0x404, 0x070, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_6__EIM_D22 IOMUX_PAD(0x408, 0x074, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_7__EIM_D23 IOMUX_PAD(0x40c, 0x078, 1, 0x0, 0, NO_PAD_CTRL) + +/* Babbage UART3 */ +#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL) + +#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x09c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_GPIO_2_10__EIM_A16 IOMUX_PAD(0x430, 0x09c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_11__EIM_A17 IOMUX_PAD(0x434, 0x0a0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_12__EIM_A18 IOMUX_PAD(0x438, 0x0a4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_13__EIM_A19 IOMUX_PAD(0x43c, 0x0a8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_14__EIM_A20 IOMUX_PAD(0x440, 0x0ac, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_15__EIM_A21 IOMUX_PAD(0x444, 0x0b0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_16__EIM_A22 IOMUX_PAD(0x448, 0x0b4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_17__EIM_A23 IOMUX_PAD(0x44c, 0x0b8, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_GPIO_2_18__EIM_A24 IOMUX_PAD(0x450, 0x0bc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_19__EIM_A25 IOMUX_PAD(0x454, 0x0c0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_20__EIM_A26 IOMUX_PAD(0x458, 0x0c4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_21__EIM_A27 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_22__EIM_EB2 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_23__EIM_EB3 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_GPIO_2_24__EIM_OE IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_25__EIM_CS0 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_26__EIM_CS1 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_27__EIM_CS2 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_28__EIM_CS3 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_29__EIM_CS4 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_30__EIM_CS5 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_31__EIM_DTACK IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_GPIO_3_1__EIM_LBA IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_2__EIM_CRE IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_3__NANDF_WE_B IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_4__NANDF_RE_B IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_5__NANDF_ALE IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_6__NANDF_CLE IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_7__NANDF_WP_B IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_8__NANDF_RB0 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_9__NANDF_RB1 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_10__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_11__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_12__GPIO_NAND IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL) +/* REVISIT: Not sure of these values + + #define MX51_PAD_GPIO_1___NANDF_RB4 IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL) + #define MX51_PAD_GPIO_3_13__NANDF_RB5 IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL) + #define MX51_PAD_GPIO_3_15__NANDF_RB7 IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL) +*/ +#define MX51_PAD_GPIO_3_14__NANDF_RB6 IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_16__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_17__NANDF_CS1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_18__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_19__NANDF_CS3 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_20__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_21__NANDF_CS5 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_22__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_23__NANDF_CS7 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_25__NANDF_D15 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_26__NANDF_D14 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_27__NANDF_D13 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_28__NANDF_D12 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_29__NANDF_D11 IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_30__NANDF_D10 IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_31__NANDF_D9 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_0__NANDF_D8 IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_1__NANDF_D7 IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_2__NANDF_D6 IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_3__NANDF_D5 IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_5__NANDF_D3 IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_6__NANDF_D2 IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_7__NANDF_D1 IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_8__NANDF_D0 IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_12__CSI1_D8 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_13__CSI1_D9 IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_PKE0__CSI1_PKE0 IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_9__CSI2_D12 IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_10__CSI2_D13 IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_11__CSI2_D14 IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_12__CSI2_D15 IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_11__CSI2_D16 IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_12__CSI2_D17 IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_11__CSI2_D18 IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_12__CSI2_D19 IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_13__CSI2_VSYNC IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_14__CSI2_HSYNC IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_PKE0__CSI2_PKE0 IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_16__I2C1_CLK IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_17__I2C1_DAT IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_20__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_21__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_22__CSPI1_MOSI IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_23__CSPI1_MISO IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_24__CSPI1_SS0 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_25__CSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_26__CSPI1_RDY IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_27__CSPI1_SCLK IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL) + +/* Babbage UART1 */ +#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) +#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) +#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL) +#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL) + +/* Babbage UART2 */ +#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL) +#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL) + +#define MX51_PAD_GPIO_1_22__UART3_RXD IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_23__UART3_TXD IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_24__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_25__USBH1_CLK IOMUX_PAD(0x678, 0x278, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_26__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_27__USBH1_STP IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_28__USBH1_NXT IOMUX_PAD(0x684, 0x284, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_11__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_12__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_13__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_14__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_15__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_16__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_17__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_18__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_0__DI1_PIN11 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_1__DI1_PIN12 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_2__DI1_PIN13 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_3__DI1_D0_CS IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_4__DI1_D1_CS IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP1__DI_GP1 IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP2__DI_GP2 IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP3__DI_GP3 IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP4__DI_GP4 IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_19__DISP2_DAT6 IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_29__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_30__DISP2_DAT8 IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_31__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_0__GPIO1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_1__GPIO1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_2__GPIO1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_3__GPIO1_3 IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_6__GPIO1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \ + (PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)) +#define MX51_PAD_GPIO_1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL) + +/* EIM */ +#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x7a8, 0x01c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x7a8, 0x020, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x7a8, 0x024, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x7a8, 0x028, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x7ac, 0x02c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x7ac, 0x030, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x7ac, 0x034, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x7ac, 0x038, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x7b0, 0x03c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x7b0, 0x040, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x7b0, 0x044, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x7b0, 0x048, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x7bc, 0x04c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x7bc, 0x050, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x7bc, 0x054, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x7bc, 0x058, 0, 0x0, 0, NO_PAD_CTRL) + +#endif /* __MACH_IOMUX_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h new file mode 100644 index 00000000000..884f5753f27 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_V1_H__ +#define __MACH_IOMUX_V1_H__ + +/* +* GPIO Module and I/O Multiplexer +* x = 0..3 for reg_A, reg_B, reg_C, reg_D +*/ +#define MXC_DDIR(x) (0x00 + ((x) << 8)) +#define MXC_OCR1(x) (0x04 + ((x) << 8)) +#define MXC_OCR2(x) (0x08 + ((x) << 8)) +#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) +#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) +#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) +#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) +#define MXC_DR(x) (0x1c + ((x) << 8)) +#define MXC_GIUS(x) (0x20 + ((x) << 8)) +#define MXC_SSR(x) (0x24 + ((x) << 8)) +#define MXC_ICR1(x) (0x28 + ((x) << 8)) +#define MXC_ICR2(x) (0x2c + ((x) << 8)) +#define MXC_IMR(x) (0x30 + ((x) << 8)) +#define MXC_ISR(x) (0x34 + ((x) << 8)) +#define MXC_GPR(x) (0x38 + ((x) << 8)) +#define MXC_SWR(x) (0x3c + ((x) << 8)) +#define MXC_PUEN(x) (0x40 + ((x) << 8)) + +#define MX1_NUM_GPIO_PORT 4 +#define MX21_NUM_GPIO_PORT 6 +#define MX27_NUM_GPIO_PORT 6 + +#define GPIO_PIN_MASK 0x1f + +#define GPIO_PORT_SHIFT 5 +#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) + +#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) +#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) +#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) +#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) +#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) +#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) + +#define GPIO_OUT (1 << 8) +#define GPIO_IN (0 << 8) +#define GPIO_PUEN (1 << 9) + +#define GPIO_PF (1 << 10) +#define GPIO_AF (1 << 11) + +#define GPIO_OCR_SHIFT 12 +#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) +#define GPIO_AIN (0 << GPIO_OCR_SHIFT) +#define GPIO_BIN (1 << GPIO_OCR_SHIFT) +#define GPIO_CIN (2 << GPIO_OCR_SHIFT) +#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) + +#define GPIO_AOUT_SHIFT 14 +#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) + +#define GPIO_BOUT_SHIFT 16 +#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) + +/* decode irq number to use with IMR(x), ISR(x) and friends */ +#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5) + +#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x) +#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) +#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) +#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) +#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x) +#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x) + +extern int mxc_gpio_mode(int gpio_mode); +extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, + const char *label); +extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count); + +#endif /* __MACH_IOMUX_V1_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index 1deda018489..f2f73d31d5b 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -81,11 +81,13 @@ struct pad_desc { #define PAD_CTL_ODE (1 << 3) -#define PAD_CTL_DSE_STANDARD (0 << 1) -#define PAD_CTL_DSE_HIGH (1 << 1) -#define PAD_CTL_DSE_MAX (2 << 1) +#define PAD_CTL_DSE_LOW (0 << 1) +#define PAD_CTL_DSE_MED (1 << 1) +#define PAD_CTL_DSE_HIGH (2 << 1) +#define PAD_CTL_DSE_MAX (3 << 1) #define PAD_CTL_SRE_FAST (1 << 0) +#define PAD_CTL_SRE_SLOW (0 << 0) /* * setups a single pad in the iomuxer diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h index 011cfcd8b82..3d226d7e7be 100644 --- a/arch/arm/plat-mxc/include/mach/iomux.h +++ b/arch/arm/plat-mxc/include/mach/iomux.h @@ -1,102 +1,14 @@ /* -* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> -* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ - -#ifndef _MXC_IOMUX_H -#define _MXC_IOMUX_H - -/* -* GPIO Module and I/O Multiplexer -* x = 0..3 for reg_A, reg_B, reg_C, reg_D -*/ -#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR) -#define MXC_DDIR(x) (0x00 + ((x) << 8)) -#define MXC_OCR1(x) (0x04 + ((x) << 8)) -#define MXC_OCR2(x) (0x08 + ((x) << 8)) -#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) -#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) -#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) -#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) -#define MXC_DR(x) (0x1c + ((x) << 8)) -#define MXC_GIUS(x) (0x20 + ((x) << 8)) -#define MXC_SSR(x) (0x24 + ((x) << 8)) -#define MXC_ICR1(x) (0x28 + ((x) << 8)) -#define MXC_ICR2(x) (0x2c + ((x) << 8)) -#define MXC_IMR(x) (0x30 + ((x) << 8)) -#define MXC_ISR(x) (0x34 + ((x) << 8)) -#define MXC_GPR(x) (0x38 + ((x) << 8)) -#define MXC_SWR(x) (0x3c + ((x) << 8)) -#define MXC_PUEN(x) (0x40 + ((x) << 8)) - -#ifdef CONFIG_ARCH_MX1 -# define GPIO_PORT_MAX 3 -#endif -#ifdef CONFIG_ARCH_MX2 -# define GPIO_PORT_MAX 5 -#endif -#ifdef CONFIG_ARCH_MX25 -# define GPIO_PORT_MAX 3 -#endif - -#ifndef GPIO_PORT_MAX -# error "GPIO config port count unknown!" -#endif - -#define GPIO_PIN_MASK 0x1f - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) - -#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) -#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) -#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) -#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) -#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) -#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) - -#define GPIO_OUT (1 << 8) -#define GPIO_IN (0 << 8) -#define GPIO_PUEN (1 << 9) - -#define GPIO_PF (1 << 10) -#define GPIO_AF (1 << 11) - -#define GPIO_OCR_SHIFT 12 -#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) -#define GPIO_AIN (0 << GPIO_OCR_SHIFT) -#define GPIO_BIN (1 << GPIO_OCR_SHIFT) -#define GPIO_CIN (2 << GPIO_OCR_SHIFT) -#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) - -#define GPIO_AOUT_SHIFT 14 -#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) - -#define GPIO_BOUT_SHIFT 16 -#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) + * Copyright (C) 2010 Uwe Kleine-Koenig, Pengutronix + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __MACH_IOMUX_H__ +#define __MACH_IOMUX_H__ +/* This file will go away, please include mach/iomux-mx... directly */ #ifdef CONFIG_ARCH_MX1 #include <mach/iomux-mx1.h> @@ -110,25 +22,5 @@ #include <mach/iomux-mx27.h> #endif #endif -#ifdef CONFIG_ARCH_MX25 -#include <mach/iomux-mx25.h> -#endif - -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5) - -#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) -#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x) -#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x) - - -extern void mxc_gpio_mode(int gpio_mode); -extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - const char *label); -extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count); - -#endif +#endif /* __MACH_IOMUX_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index 0cb347645db..86781f7b0c0 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -12,22 +12,29 @@ #define __ASM_ARCH_MXC_IRQS_H__ /* - * So far all i.MX SoCs have 64 internal interrupts + * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64 */ +#ifdef CONFIG_MXC_TZIC +#define MXC_INTERNAL_IRQS 128 +#else #define MXC_INTERNAL_IRQS 64 +#endif #define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS -#if defined CONFIG_ARCH_MX1 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX2 +/* these are ordered by size to support multi-SoC kernels */ +#if defined CONFIG_ARCH_MX2 #define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_ARCH_MX3 -#define MXC_GPIO_IRQS (32 * 3) +#elif defined CONFIG_ARCH_MX1 +#define MXC_GPIO_IRQS (32 * 4) #elif defined CONFIG_ARCH_MX25 #define MXC_GPIO_IRQS (32 * 4) +#elif defined CONFIG_ARCH_MX5 +#define MXC_GPIO_IRQS (32 * 4) #elif defined CONFIG_ARCH_MXC91231 #define MXC_GPIO_IRQS (32 * 4) +#elif defined CONFIG_ARCH_MX3 +#define MXC_GPIO_IRQS (32 * 3) #endif /* @@ -51,6 +58,7 @@ #else #define MX3_IPU_IRQS 0 #endif +/* REVISIT: Add IPU irqs on IMX51 */ #define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS) diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index d3afafdcc0e..c4b40c35a6a 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -11,37 +11,45 @@ #ifndef __ASM_ARCH_MXC_MEMORY_H__ #define __ASM_ARCH_MXC_MEMORY_H__ -#if defined CONFIG_ARCH_MX1 -#define PHYS_OFFSET UL(0x08000000) -#elif defined CONFIG_ARCH_MX2 -#ifdef CONFIG_MACH_MX21 -#define PHYS_OFFSET UL(0xC0000000) -#endif -#ifdef CONFIG_MACH_MX27 -#define PHYS_OFFSET UL(0xA0000000) -#endif -#elif defined CONFIG_ARCH_MX3 -#define PHYS_OFFSET UL(0x80000000) -#elif defined CONFIG_ARCH_MX25 -#define PHYS_OFFSET UL(0x80000000) -#elif defined CONFIG_ARCH_MXC91231 -#define PHYS_OFFSET UL(0x90000000) +#define MX1_PHYS_OFFSET UL(0x08000000) +#define MX21_PHYS_OFFSET UL(0xc0000000) +#define MX25_PHYS_OFFSET UL(0x80000000) +#define MX27_PHYS_OFFSET UL(0xa0000000) +#define MX3x_PHYS_OFFSET UL(0x80000000) +#define MX51_PHYS_OFFSET UL(0x90000000) +#define MXC91231_PHYS_OFFSET UL(0x90000000) + +#if !defined(CONFIG_RUNTIME_PHYS_OFFSET) +# if defined CONFIG_ARCH_MX1 +# define PHYS_OFFSET MX1_PHYS_OFFSET +# elif defined CONFIG_MACH_MX21 +# define PHYS_OFFSET MX21_PHYS_OFFSET +# elif defined CONFIG_ARCH_MX25 +# define PHYS_OFFSET MX25_PHYS_OFFSET +# elif defined CONFIG_MACH_MX27 +# define PHYS_OFFSET MX27_PHYS_OFFSET +# elif defined CONFIG_ARCH_MX3 +# define PHYS_OFFSET MX3x_PHYS_OFFSET +# elif defined CONFIG_ARCH_MXC91231 +# define PHYS_OFFSET MXC91231_PHYS_OFFSET +# elif defined CONFIG_ARCH_MX5 +# define PHYS_OFFSET MX51_PHYS_OFFSET +# endif #endif -#if defined(CONFIG_MX1_VIDEO) +#if defined(CONFIG_MX3_VIDEO) /* * Increase size of DMA-consistent memory region. - * This is required for i.MX camera driver to capture at least four VGA frames. + * This is required for mx3 camera driver to capture at least two QXGA frames. */ -#define CONSISTENT_DMA_SIZE SZ_4M -#endif /* CONFIG_MX1_VIDEO */ +#define CONSISTENT_DMA_SIZE SZ_8M -#if defined(CONFIG_MX3_VIDEO) +#elif defined(CONFIG_MX1_VIDEO) /* * Increase size of DMA-consistent memory region. - * This is required for mx3 camera driver to capture at least two QXGA frames. + * This is required for i.MX camera driver to capture at least four VGA frames. */ -#define CONSISTENT_DMA_SIZE SZ_8M -#endif /* CONFIG_MX3_VIDEO */ +#define CONSISTENT_DMA_SIZE SZ_4M +#endif /* CONFIG_MX1_VIDEO */ #endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mtd-xip.h b/arch/arm/plat-mxc/include/mach/mtd-xip.h deleted file mode 100644 index 1ab1bba5688..00000000000 --- a/arch/arm/plat-mxc/include/mach/mtd-xip.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * MTD primitives for XIP support. Architecture specific functions - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>, Teltonika, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <mach/mxc_timer.h> - -#ifndef __ARCH_IMX_MTD_XIP_H__ -#define __ARCH_IMX_MTD_XIP_H__ - -#ifdef CONFIG_ARCH_MX1 -/* AITC registers */ -#define AITC_BASE IO_ADDRESS(AVIC_BASE_ADDR) -#define NIPNDH (AITC_BASE + 0x58) -#define NIPNDL (AITC_BASE + 0x5C) -#define INTENABLEH (AITC_BASE + 0x10) -#define INTENABLEL (AITC_BASE + 0x14) -/* MTD macros */ -#define xip_irqpending() ((__raw_readl(INTENABLEH) & __raw_readl(NIPNDH)) \ - || (__raw_readl(INTENABLEL) & __raw_readl(NIPNDL))) -#define xip_currtime() (__raw_readl(TIMER_BASE + MXC_TCN)) -#define xip_elapsed_since(x) (signed)((__raw_readl(TIMER_BASE + MXC_TCN) - (x)) / 96) -#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (0)) -#endif /* CONFIG_ARCH_MX1 */ - -#endif /* __ARCH_IMX_MTD_XIP_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index 1b2890a5c45..5eba7e6785d 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -9,156 +9,289 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_MXC_MX1_H__ -#define __ASM_ARCH_MXC_MX1_H__ +#ifndef __MACH_MX1_H__ +#define __MACH_MX1_H__ #include <mach/vmalloc.h> /* * Memory map */ -#define IMX_IO_PHYS 0x00200000 -#define IMX_IO_SIZE 0x00100000 -#define IMX_IO_BASE VMALLOC_END +#define MX1_IO_BASE_ADDR 0x00200000 +#define MX1_IO_SIZE SZ_1M +#define MX1_IO_BASE_ADDR_VIRT VMALLOC_END -#define IMX_CS0_PHYS 0x10000000 -#define IMX_CS0_SIZE 0x02000000 +#define MX1_CS0_PHYS 0x10000000 +#define MX1_CS0_SIZE 0x02000000 -#define IMX_CS1_PHYS 0x12000000 -#define IMX_CS1_SIZE 0x01000000 +#define MX1_CS1_PHYS 0x12000000 +#define MX1_CS1_SIZE 0x01000000 -#define IMX_CS2_PHYS 0x13000000 -#define IMX_CS2_SIZE 0x01000000 +#define MX1_CS2_PHYS 0x13000000 +#define MX1_CS2_SIZE 0x01000000 -#define IMX_CS3_PHYS 0x14000000 -#define IMX_CS3_SIZE 0x01000000 +#define MX1_CS3_PHYS 0x14000000 +#define MX1_CS3_SIZE 0x01000000 -#define IMX_CS4_PHYS 0x15000000 -#define IMX_CS4_SIZE 0x01000000 +#define MX1_CS4_PHYS 0x15000000 +#define MX1_CS4_SIZE 0x01000000 -#define IMX_CS5_PHYS 0x16000000 -#define IMX_CS5_SIZE 0x01000000 +#define MX1_CS5_PHYS 0x16000000 +#define MX1_CS5_SIZE 0x01000000 /* * Register BASEs, based on OFFSETs */ -#define AIPI1_BASE_ADDR (0x00000 + IMX_IO_PHYS) -#define WDT_BASE_ADDR (0x01000 + IMX_IO_PHYS) -#define TIM1_BASE_ADDR (0x02000 + IMX_IO_PHYS) -#define TIM2_BASE_ADDR (0x03000 + IMX_IO_PHYS) -#define RTC_BASE_ADDR (0x04000 + IMX_IO_PHYS) -#define LCDC_BASE_ADDR (0x05000 + IMX_IO_PHYS) -#define UART1_BASE_ADDR (0x06000 + IMX_IO_PHYS) -#define UART2_BASE_ADDR (0x07000 + IMX_IO_PHYS) -#define PWM_BASE_ADDR (0x08000 + IMX_IO_PHYS) -#define DMA_BASE_ADDR (0x09000 + IMX_IO_PHYS) -#define AIPI2_BASE_ADDR (0x10000 + IMX_IO_PHYS) -#define SIM_BASE_ADDR (0x11000 + IMX_IO_PHYS) -#define USBD_BASE_ADDR (0x12000 + IMX_IO_PHYS) -#define SPI1_BASE_ADDR (0x13000 + IMX_IO_PHYS) -#define MMC_BASE_ADDR (0x14000 + IMX_IO_PHYS) -#define ASP_BASE_ADDR (0x15000 + IMX_IO_PHYS) -#define BTA_BASE_ADDR (0x16000 + IMX_IO_PHYS) -#define I2C_BASE_ADDR (0x17000 + IMX_IO_PHYS) -#define SSI_BASE_ADDR (0x18000 + IMX_IO_PHYS) -#define SPI2_BASE_ADDR (0x19000 + IMX_IO_PHYS) -#define MSHC_BASE_ADDR (0x1A000 + IMX_IO_PHYS) -#define CCM_BASE_ADDR (0x1B000 + IMX_IO_PHYS) -#define SCM_BASE_ADDR (0x1B804 + IMX_IO_PHYS) -#define GPIO_BASE_ADDR (0x1C000 + IMX_IO_PHYS) -#define EIM_BASE_ADDR (0x20000 + IMX_IO_PHYS) -#define SDRAMC_BASE_ADDR (0x21000 + IMX_IO_PHYS) -#define MMA_BASE_ADDR (0x22000 + IMX_IO_PHYS) -#define AVIC_BASE_ADDR (0x23000 + IMX_IO_PHYS) -#define CSI_BASE_ADDR (0x24000 + IMX_IO_PHYS) +#define MX1_AIPI1_BASE_ADDR (0x00000 + MX1_IO_BASE_ADDR) +#define MX1_WDT_BASE_ADDR (0x01000 + MX1_IO_BASE_ADDR) +#define MX1_TIM1_BASE_ADDR (0x02000 + MX1_IO_BASE_ADDR) +#define MX1_TIM2_BASE_ADDR (0x03000 + MX1_IO_BASE_ADDR) +#define MX1_RTC_BASE_ADDR (0x04000 + MX1_IO_BASE_ADDR) +#define MX1_LCDC_BASE_ADDR (0x05000 + MX1_IO_BASE_ADDR) +#define MX1_UART1_BASE_ADDR (0x06000 + MX1_IO_BASE_ADDR) +#define MX1_UART2_BASE_ADDR (0x07000 + MX1_IO_BASE_ADDR) +#define MX1_PWM_BASE_ADDR (0x08000 + MX1_IO_BASE_ADDR) +#define MX1_DMA_BASE_ADDR (0x09000 + MX1_IO_BASE_ADDR) +#define MX1_AIPI2_BASE_ADDR (0x10000 + MX1_IO_BASE_ADDR) +#define MX1_SIM_BASE_ADDR (0x11000 + MX1_IO_BASE_ADDR) +#define MX1_USBD_BASE_ADDR (0x12000 + MX1_IO_BASE_ADDR) +#define MX1_SPI1_BASE_ADDR (0x13000 + MX1_IO_BASE_ADDR) +#define MX1_MMC_BASE_ADDR (0x14000 + MX1_IO_BASE_ADDR) +#define MX1_ASP_BASE_ADDR (0x15000 + MX1_IO_BASE_ADDR) +#define MX1_BTA_BASE_ADDR (0x16000 + MX1_IO_BASE_ADDR) +#define MX1_I2C_BASE_ADDR (0x17000 + MX1_IO_BASE_ADDR) +#define MX1_SSI_BASE_ADDR (0x18000 + MX1_IO_BASE_ADDR) +#define MX1_SPI2_BASE_ADDR (0x19000 + MX1_IO_BASE_ADDR) +#define MX1_MSHC_BASE_ADDR (0x1A000 + MX1_IO_BASE_ADDR) +#define MX1_CCM_BASE_ADDR (0x1B000 + MX1_IO_BASE_ADDR) +#define MX1_SCM_BASE_ADDR (0x1B804 + MX1_IO_BASE_ADDR) +#define MX1_GPIO_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR) +#define MX1_EIM_BASE_ADDR (0x20000 + MX1_IO_BASE_ADDR) +#define MX1_SDRAMC_BASE_ADDR (0x21000 + MX1_IO_BASE_ADDR) +#define MX1_MMA_BASE_ADDR (0x22000 + MX1_IO_BASE_ADDR) +#define MX1_AVIC_BASE_ADDR (0x23000 + MX1_IO_BASE_ADDR) +#define MX1_CSI_BASE_ADDR (0x24000 + MX1_IO_BASE_ADDR) /* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((x) - IMX_IO_PHYS + IMX_IO_BASE) - -/* define macros needed for entry-macro.S */ -#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x) +#define MX1_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX1_IO)) /* fixed interrput numbers */ -#define INT_SOFTINT 0 -#define CSI_INT 6 -#define DSPA_MAC_INT 7 -#define DSPA_INT 8 -#define COMP_INT 9 -#define MSHC_XINT 10 -#define GPIO_INT_PORTA 11 -#define GPIO_INT_PORTB 12 -#define GPIO_INT_PORTC 13 -#define LCDC_INT 14 -#define SIM_INT 15 -#define SIM_DATA_INT 16 -#define RTC_INT 17 -#define RTC_SAMINT 18 -#define UART2_MINT_PFERR 19 -#define UART2_MINT_RTS 20 -#define UART2_MINT_DTR 21 -#define UART2_MINT_UARTC 22 -#define UART2_MINT_TX 23 -#define UART2_MINT_RX 24 -#define UART1_MINT_PFERR 25 -#define UART1_MINT_RTS 26 -#define UART1_MINT_DTR 27 -#define UART1_MINT_UARTC 28 -#define UART1_MINT_TX 29 -#define UART1_MINT_RX 30 -#define VOICE_DAC_INT 31 -#define VOICE_ADC_INT 32 -#define PEN_DATA_INT 33 -#define PWM_INT 34 -#define SDHC_INT 35 -#define I2C_INT 39 -#define CSPI_INT 41 -#define SSI_TX_INT 42 -#define SSI_TX_ERR_INT 43 -#define SSI_RX_INT 44 -#define SSI_RX_ERR_INT 45 -#define TOUCH_INT 46 -#define USBD_INT0 47 -#define USBD_INT1 48 -#define USBD_INT2 49 -#define USBD_INT3 50 -#define USBD_INT4 51 -#define USBD_INT5 52 -#define USBD_INT6 53 -#define BTSYS_INT 55 -#define BTTIM_INT 56 -#define BTWUI_INT 57 -#define TIM2_INT 58 -#define TIM1_INT 59 -#define DMA_ERR 60 -#define DMA_INT 61 -#define GPIO_INT_PORTD 62 -#define WDT_INT 63 +#define MX1_INT_SOFTINT 0 +#define MX1_CSI_INT 6 +#define MX1_DSPA_MAC_INT 7 +#define MX1_DSPA_INT 8 +#define MX1_COMP_INT 9 +#define MX1_MSHC_XINT 10 +#define MX1_GPIO_INT_PORTA 11 +#define MX1_GPIO_INT_PORTB 12 +#define MX1_GPIO_INT_PORTC 13 +#define MX1_LCDC_INT 14 +#define MX1_SIM_INT 15 +#define MX1_SIM_DATA_INT 16 +#define MX1_RTC_INT 17 +#define MX1_RTC_SAMINT 18 +#define MX1_UART2_MINT_PFERR 19 +#define MX1_UART2_MINT_RTS 20 +#define MX1_UART2_MINT_DTR 21 +#define MX1_UART2_MINT_UARTC 22 +#define MX1_UART2_MINT_TX 23 +#define MX1_UART2_MINT_RX 24 +#define MX1_UART1_MINT_PFERR 25 +#define MX1_UART1_MINT_RTS 26 +#define MX1_UART1_MINT_DTR 27 +#define MX1_UART1_MINT_UARTC 28 +#define MX1_UART1_MINT_TX 29 +#define MX1_UART1_MINT_RX 30 +#define MX1_VOICE_DAC_INT 31 +#define MX1_VOICE_ADC_INT 32 +#define MX1_PEN_DATA_INT 33 +#define MX1_PWM_INT 34 +#define MX1_SDHC_INT 35 +#define MX1_I2C_INT 39 +#define MX1_CSPI_INT 41 +#define MX1_SSI_TX_INT 42 +#define MX1_SSI_TX_ERR_INT 43 +#define MX1_SSI_RX_INT 44 +#define MX1_SSI_RX_ERR_INT 45 +#define MX1_TOUCH_INT 46 +#define MX1_USBD_INT0 47 +#define MX1_USBD_INT1 48 +#define MX1_USBD_INT2 49 +#define MX1_USBD_INT3 50 +#define MX1_USBD_INT4 51 +#define MX1_USBD_INT5 52 +#define MX1_USBD_INT6 53 +#define MX1_BTSYS_INT 55 +#define MX1_BTTIM_INT 56 +#define MX1_BTWUI_INT 57 +#define MX1_TIM2_INT 58 +#define MX1_TIM1_INT 59 +#define MX1_DMA_ERR 60 +#define MX1_DMA_INT 61 +#define MX1_GPIO_INT_PORTD 62 +#define MX1_WDT_INT 63 /* DMA */ -#define DMA_REQ_UART3_T 2 -#define DMA_REQ_UART3_R 3 -#define DMA_REQ_SSI2_T 4 -#define DMA_REQ_SSI2_R 5 -#define DMA_REQ_CSI_STAT 6 -#define DMA_REQ_CSI_R 7 -#define DMA_REQ_MSHC 8 -#define DMA_REQ_DSPA_DCT_DOUT 9 -#define DMA_REQ_DSPA_DCT_DIN 10 -#define DMA_REQ_DSPA_MAC 11 -#define DMA_REQ_EXT 12 -#define DMA_REQ_SDHC 13 -#define DMA_REQ_SPI1_R 14 -#define DMA_REQ_SPI1_T 15 -#define DMA_REQ_SSI_T 16 -#define DMA_REQ_SSI_R 17 -#define DMA_REQ_ASP_DAC 18 -#define DMA_REQ_ASP_ADC 19 -#define DMA_REQ_USP_EP(x) (20 + (x)) -#define DMA_REQ_SPI2_R 26 -#define DMA_REQ_SPI2_T 27 -#define DMA_REQ_UART2_T 28 -#define DMA_REQ_UART2_R 29 -#define DMA_REQ_UART1_T 30 -#define DMA_REQ_UART1_R 31 - -#endif /* __ASM_ARCH_MXC_MX1_H__ */ +#define MX1_DMA_REQ_UART3_T 2 +#define MX1_DMA_REQ_UART3_R 3 +#define MX1_DMA_REQ_SSI2_T 4 +#define MX1_DMA_REQ_SSI2_R 5 +#define MX1_DMA_REQ_CSI_STAT 6 +#define MX1_DMA_REQ_CSI_R 7 +#define MX1_DMA_REQ_MSHC 8 +#define MX1_DMA_REQ_DSPA_DCT_DOUT 9 +#define MX1_DMA_REQ_DSPA_DCT_DIN 10 +#define MX1_DMA_REQ_DSPA_MAC 11 +#define MX1_DMA_REQ_EXT 12 +#define MX1_DMA_REQ_SDHC 13 +#define MX1_DMA_REQ_SPI1_R 14 +#define MX1_DMA_REQ_SPI1_T 15 +#define MX1_DMA_REQ_SSI_T 16 +#define MX1_DMA_REQ_SSI_R 17 +#define MX1_DMA_REQ_ASP_DAC 18 +#define MX1_DMA_REQ_ASP_ADC 19 +#define MX1_DMA_REQ_USP_EP(x) (20 + (x)) +#define MX1_DMA_REQ_SPI2_R 26 +#define MX1_DMA_REQ_SPI2_T 27 +#define MX1_DMA_REQ_UART2_T 28 +#define MX1_DMA_REQ_UART2_R 29 +#define MX1_DMA_REQ_UART1_T 30 +#define MX1_DMA_REQ_UART1_R 31 + +/* + * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS + * to not break drivers/usb/gadget/imx_udc. Should go + * away after this driver uses the new name. + */ +#define USBD_INT0 MX1_USBD_INT0 + +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS +/* these should go away */ +#define IMX_IO_PHYS MX1_IO_BASE_ADDR +#define IMX_IO_SIZE MX1_IO_SIZE +#define IMX_IO_BASE MX1_IO_BASE_ADDR_VIRT +#define IMX_CS0_PHYS MX1_CS0_PHYS +#define IMX_CS0_SIZE MX1_CS0_SIZE +#define IMX_CS1_PHYS MX1_CS1_PHYS +#define IMX_CS1_SIZE MX1_CS1_SIZE +#define IMX_CS2_PHYS MX1_CS2_PHYS +#define IMX_CS2_SIZE MX1_CS2_SIZE +#define IMX_CS3_PHYS MX1_CS3_PHYS +#define IMX_CS3_SIZE MX1_CS3_SIZE +#define IMX_CS4_PHYS MX1_CS4_PHYS +#define IMX_CS4_SIZE MX1_CS4_SIZE +#define IMX_CS5_PHYS MX1_CS5_PHYS +#define IMX_CS5_SIZE MX1_CS5_SIZE +#define AIPI1_BASE_ADDR MX1_AIPI1_BASE_ADDR +#define WDT_BASE_ADDR MX1_WDT_BASE_ADDR +#define TIM1_BASE_ADDR MX1_TIM1_BASE_ADDR +#define TIM2_BASE_ADDR MX1_TIM2_BASE_ADDR +#define RTC_BASE_ADDR MX1_RTC_BASE_ADDR +#define LCDC_BASE_ADDR MX1_LCDC_BASE_ADDR +#define UART1_BASE_ADDR MX1_UART1_BASE_ADDR +#define UART2_BASE_ADDR MX1_UART2_BASE_ADDR +#define PWM_BASE_ADDR MX1_PWM_BASE_ADDR +#define DMA_BASE_ADDR MX1_DMA_BASE_ADDR +#define AIPI2_BASE_ADDR MX1_AIPI2_BASE_ADDR +#define SIM_BASE_ADDR MX1_SIM_BASE_ADDR +#define USBD_BASE_ADDR MX1_USBD_BASE_ADDR +#define SPI1_BASE_ADDR MX1_SPI1_BASE_ADDR +#define MMC_BASE_ADDR MX1_MMC_BASE_ADDR +#define ASP_BASE_ADDR MX1_ASP_BASE_ADDR +#define BTA_BASE_ADDR MX1_BTA_BASE_ADDR +#define I2C_BASE_ADDR MX1_I2C_BASE_ADDR +#define SSI_BASE_ADDR MX1_SSI_BASE_ADDR +#define SPI2_BASE_ADDR MX1_SPI2_BASE_ADDR +#define MSHC_BASE_ADDR MX1_MSHC_BASE_ADDR +#define CCM_BASE_ADDR MX1_CCM_BASE_ADDR +#define SCM_BASE_ADDR MX1_SCM_BASE_ADDR +#define GPIO_BASE_ADDR MX1_GPIO_BASE_ADDR +#define EIM_BASE_ADDR MX1_EIM_BASE_ADDR +#define SDRAMC_BASE_ADDR MX1_SDRAMC_BASE_ADDR +#define MMA_BASE_ADDR MX1_MMA_BASE_ADDR +#define AVIC_BASE_ADDR MX1_AVIC_BASE_ADDR +#define CSI_BASE_ADDR MX1_CSI_BASE_ADDR +#define IO_ADDRESS(x) MX1_IO_ADDRESS(x) +#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x) +#define INT_SOFTINT MX1_INT_SOFTINT +#define CSI_INT MX1_CSI_INT +#define DSPA_MAC_INT MX1_DSPA_MAC_INT +#define DSPA_INT MX1_DSPA_INT +#define COMP_INT MX1_COMP_INT +#define MSHC_XINT MX1_MSHC_XINT +#define GPIO_INT_PORTA MX1_GPIO_INT_PORTA +#define GPIO_INT_PORTB MX1_GPIO_INT_PORTB +#define GPIO_INT_PORTC MX1_GPIO_INT_PORTC +#define LCDC_INT MX1_LCDC_INT +#define SIM_INT MX1_SIM_INT +#define SIM_DATA_INT MX1_SIM_DATA_INT +#define RTC_INT MX1_RTC_INT +#define RTC_SAMINT MX1_RTC_SAMINT +#define UART2_MINT_PFERR MX1_UART2_MINT_PFERR +#define UART2_MINT_RTS MX1_UART2_MINT_RTS +#define UART2_MINT_DTR MX1_UART2_MINT_DTR +#define UART2_MINT_UARTC MX1_UART2_MINT_UARTC +#define UART2_MINT_TX MX1_UART2_MINT_TX +#define UART2_MINT_RX MX1_UART2_MINT_RX +#define UART1_MINT_PFERR MX1_UART1_MINT_PFERR +#define UART1_MINT_RTS MX1_UART1_MINT_RTS +#define UART1_MINT_DTR MX1_UART1_MINT_DTR +#define UART1_MINT_UARTC MX1_UART1_MINT_UARTC +#define UART1_MINT_TX MX1_UART1_MINT_TX +#define UART1_MINT_RX MX1_UART1_MINT_RX +#define VOICE_DAC_INT MX1_VOICE_DAC_INT +#define VOICE_ADC_INT MX1_VOICE_ADC_INT +#define PEN_DATA_INT MX1_PEN_DATA_INT +#define PWM_INT MX1_PWM_INT +#define SDHC_INT MX1_SDHC_INT +#define I2C_INT MX1_I2C_INT +#define CSPI_INT MX1_CSPI_INT +#define SSI_TX_INT MX1_SSI_TX_INT +#define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT +#define SSI_RX_INT MX1_SSI_RX_INT +#define SSI_RX_ERR_INT MX1_SSI_RX_ERR_INT +#define TOUCH_INT MX1_TOUCH_INT +#define USBD_INT1 MX1_USBD_INT1 +#define USBD_INT2 MX1_USBD_INT2 +#define USBD_INT3 MX1_USBD_INT3 +#define USBD_INT4 MX1_USBD_INT4 +#define USBD_INT5 MX1_USBD_INT5 +#define USBD_INT6 MX1_USBD_INT6 +#define BTSYS_INT MX1_BTSYS_INT +#define BTTIM_INT MX1_BTTIM_INT +#define BTWUI_INT MX1_BTWUI_INT +#define TIM2_INT MX1_TIM2_INT +#define TIM1_INT MX1_TIM1_INT +#define DMA_ERR MX1_DMA_ERR +#define DMA_INT MX1_DMA_INT +#define GPIO_INT_PORTD MX1_GPIO_INT_PORTD +#define WDT_INT MX1_WDT_INT +#define DMA_REQ_UART3_T MX1_DMA_REQ_UART3_T +#define DMA_REQ_UART3_R MX1_DMA_REQ_UART3_R +#define DMA_REQ_SSI2_T MX1_DMA_REQ_SSI2_T +#define DMA_REQ_SSI2_R MX1_DMA_REQ_SSI2_R +#define DMA_REQ_CSI_STAT MX1_DMA_REQ_CSI_STAT +#define DMA_REQ_CSI_R MX1_DMA_REQ_CSI_R +#define DMA_REQ_MSHC MX1_DMA_REQ_MSHC +#define DMA_REQ_DSPA_DCT_DOUT MX1_DMA_REQ_DSPA_DCT_DOUT +#define DMA_REQ_DSPA_DCT_DIN MX1_DMA_REQ_DSPA_DCT_DIN +#define DMA_REQ_DSPA_MAC MX1_DMA_REQ_DSPA_MAC +#define DMA_REQ_EXT MX1_DMA_REQ_EXT +#define DMA_REQ_SDHC MX1_DMA_REQ_SDHC +#define DMA_REQ_SPI1_R MX1_DMA_REQ_SPI1_R +#define DMA_REQ_SPI1_T MX1_DMA_REQ_SPI1_T +#define DMA_REQ_SSI_T MX1_DMA_REQ_SSI_T +#define DMA_REQ_SSI_R MX1_DMA_REQ_SSI_R +#define DMA_REQ_ASP_DAC MX1_DMA_REQ_ASP_DAC +#define DMA_REQ_ASP_ADC MX1_DMA_REQ_ASP_ADC +#define DMA_REQ_USP_EP(x) MX1_DMA_REQ_USP_EP(x) +#define DMA_REQ_SPI2_R MX1_DMA_REQ_SPI2_R +#define DMA_REQ_SPI2_T MX1_DMA_REQ_SPI2_T +#define DMA_REQ_UART2_T MX1_DMA_REQ_UART2_T +#define DMA_REQ_UART2_R MX1_DMA_REQ_UART2_R +#define DMA_REQ_UART1_T MX1_DMA_REQ_UART1_T +#define DMA_REQ_UART1_R MX1_DMA_REQ_UART1_R +#endif /* ifdef IMX_NEEDS_DEPRECATED_SYMBOLS */ + +#endif /* ifndef __MACH_MX1_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index bb297d8765a..ed98b9c9f38 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -22,8 +22,8 @@ * MA 02110-1301, USA. */ -#ifndef __ASM_ARCH_MXC_MX21_H__ -#define __ASM_ARCH_MXC_MX21_H__ +#ifndef __MACH_MX21_H__ +#define __MACH_MX21_H__ #define MX21_AIPI_BASE_ADDR 0x10000000 #define MX21_AIPI_BASE_ADDR_VIRT 0xf4000000 @@ -92,6 +92,11 @@ #define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */ +#define MX21_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX21_AIPI) ?: \ + IMX_IO_ADDRESS(x, MX21_SAHB1) ?: \ + IMX_IO_ADDRESS(x, MX21_X_MEMC)) + /* fixed interrupt numbers */ #define MX21_INT_CSPI3 6 #define MX21_INT_GPIO 8 @@ -179,6 +184,7 @@ #define MX21_DMA_REQ_CSI_STAT 30 #define MX21_DMA_REQ_CSI_RX 31 +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR #define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR @@ -211,5 +217,6 @@ #define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX #define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX #define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX +#endif -#endif /* __ASM_ARCH_MXC_MX21_H__ */ +#endif /* ifndef __MACH_MX21_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 854e2dc5848..4eb6e334bda 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -22,27 +22,27 @@ #define MX25_GPIO3_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000) #define MX25_GPIO4_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000) -#define MX25_AIPS1_IO_ADDRESS(x) \ - (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT) -#define MX25_AIPS2_IO_ADDRESS(x) \ - (((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT) -#define MX25_AVIC_IO_ADDRESS(x) \ - (((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT) +#define MX25_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX25_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MX25_AIPS2) ?: \ + IMX_IO_ADDRESS(x, MX25_AVIC)) -#define __in_range(addr, name) ((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE) - -#define MX25_IO_ADDRESS(x) \ - (void __force __iomem *) \ - (__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) : \ - __in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) : \ - __in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) : \ - 0xDEADBEEF) - -#define UART1_BASE_ADDR 0x43f90000 -#define UART2_BASE_ADDR 0x43f94000 +#define MX25_UART1_BASE_ADDR 0x43f90000 +#define MX25_UART2_BASE_ADDR 0x43f94000 #define MX25_FEC_BASE_ADDR 0x50038000 +#define MX25_NFC_BASE_ADDR 0xbb000000 +#define MX25_DRYICE_BASE_ADDR 0x53ffc000 +#define MX25_LCDC_BASE_ADDR 0x53fbc000 +#define MX25_INT_DRYICE 25 #define MX25_INT_FEC 57 +#define MX25_INT_NANDFC 33 +#define MX25_INT_LCDC 39 + +#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS) +#define UART1_BASE_ADDR MX25_UART1_BASE_ADDR +#define UART2_BASE_ADDR MX25_UART2_BASE_ADDR +#endif -#endif /* __MACH_MX25_H__ */ +#endif /* ifndef __MACH_MX25_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index e2ae19f5171..bae9cd75bee 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -21,8 +21,12 @@ * MA 02110-1301, USA. */ -#ifndef __ASM_ARCH_MXC_MX27_H__ -#define __ASM_ARCH_MXC_MX27_H__ +#ifndef __MACH_MX27_H__ +#define __MACH_MX27_H__ + +#ifndef __ASSEMBLER__ +#include <linux/io.h> +#endif #define MX27_AIPI_BASE_ADDR 0x10000000 #define MX27_AIPI_BASE_ADDR_VIRT 0xf4000000 @@ -109,11 +113,31 @@ #define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000) #define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000) +#define MX27_WEIM_CSCRx_BASE_ADDR(cs) (MX27_WEIM_BASE_ADDR + (cs) * 0x10) +#define MX27_WEIM_CSCRxU(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs)) +#define MX27_WEIM_CSCRxL(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4) +#define MX27_WEIM_CSCRxA(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8) + #define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000 /* IRAM */ #define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */ +#define MX27_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX27_AIPI) ?: \ + IMX_IO_ADDRESS(x, MX27_SAHB1) ?: \ + IMX_IO_ADDRESS(x, MX27_X_MEMC)) + +#ifndef __ASSEMBLER__ +static inline void mx27_setup_weimcs(size_t cs, + unsigned upper, unsigned lower, unsigned addional) +{ + __raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs))); + __raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs))); + __raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs))); +} +#endif + /* fixed interrupt numbers */ #define MX27_INT_I2C2 1 #define MX27_INT_GPT6 2 @@ -225,6 +249,7 @@ extern int mx27_revision(void); #endif +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR #define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR @@ -292,5 +317,6 @@ extern int mx27_revision(void); #define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX #define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3 #define DMA_REQ_NFC MX27_DMA_REQ_NFC +#endif -#endif /* __ASM_ARCH_MXC_MX27_H__ */ +#endif /* ifndef __MACH_MX27_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h index f2eaf140ed0..afb895a0b5b 100644 --- a/arch/arm/plat-mxc/include/mach/mx2x.h +++ b/arch/arm/plat-mxc/include/mach/mx2x.h @@ -20,8 +20,8 @@ * MA 02110-1301, USA. */ -#ifndef __ASM_ARCH_MXC_MX2x_H__ -#define __ASM_ARCH_MXC_MX2x_H__ +#ifndef __MACH_MX2x_H__ +#define __MACH_MX2x_H__ /* The following addresses are common between i.MX21 and i.MX27 */ @@ -176,6 +176,7 @@ #define MX2x_DMA_REQ_CSI_STAT 30 #define MX2x_DMA_REQ_CSI_RX 31 +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR #define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT @@ -287,5 +288,6 @@ #define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX #define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT #define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX +#endif -#endif /* __ASM_ARCH_MXC_MX2x_H__ */ +#endif /* ifndef __MACH_MX2x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index b8b47d139eb..fb90e119c2b 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -1,3 +1,10 @@ +#ifndef __MACH_MX31_H__ +#define __MACH_MX31_H__ + +#ifndef __ASSEMBLER__ +#include <linux/io.h> +#endif + /* * IRAM */ @@ -107,8 +114,30 @@ #define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000) #define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR +#define MX31_WEIM_CSCRx_BASE_ADDR(cs) (MX31_WEIM_BASE_ADDR + (cs) * 0x10) +#define MX31_WEIM_CSCRxU(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs)) +#define MX31_WEIM_CSCRxL(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4) +#define MX31_WEIM_CSCRxA(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8) + #define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000 +#define MX31_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX31_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MX31_AIPS2) ?: \ + IMX_IO_ADDRESS(x, MX31_AVIC) ?: \ + IMX_IO_ADDRESS(x, MX31_X_MEMC) ?: \ + IMX_IO_ADDRESS(x, MX31_SPBA0)) + +#ifndef __ASSEMBLER__ +static inline void mx31_setup_weimcs(size_t cs, + unsigned upper, unsigned lower, unsigned addional) +{ + __raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs))); + __raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs))); + __raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs))); +} +#endif + #define MX31_INT_I2C3 3 #define MX31_INT_I2C2 4 #define MX31_INT_MPEG4_ENCODER 5 @@ -186,6 +215,7 @@ #define MX31_SYSTEM_REV_MIN MX31_CHIP_REV_1_0 #define MX31_SYSTEM_REV_NUM 3 +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define ATA_BASE_ADDR MX31_ATA_BASE_ADDR #define UART4_BASE_ADDR MX31_UART4_BASE_ADDR @@ -216,3 +246,6 @@ #define MXC_INT_UART5 MX31_INT_UART5 #define MXC_INT_CCM MX31_INT_CCM #define MXC_INT_PCMCIA MX31_INT_PCMCIA +#endif + +#endif /* ifndef __MACH_MX31_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index af871bce35b..526a55842ae 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -1,3 +1,5 @@ +#ifndef __MACH_MX35_H__ +#define __MACH_MX35_H__ /* * IRAM */ @@ -104,6 +106,13 @@ #define MX35_NFC_BASE_ADDR 0xbb000000 #define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000 +#define MX35_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX35_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MX35_AIPS2) ?: \ + IMX_IO_ADDRESS(x, MX35_AVIC) ?: \ + IMX_IO_ADDRESS(x, MX35_X_MEMC) ?: \ + IMX_IO_ADDRESS(x, MX35_SPBA0)) + /* * Interrupt numbers */ @@ -180,6 +189,7 @@ #define MX35_SYSTEM_REV_MIN MX35_CHIP_REV_1_0 #define MX35_SYSTEM_REV_NUM 3 +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR #define MXC_INT_OWIRE MX35_INT_OWIRE @@ -195,3 +205,6 @@ #define MXC_INT_MLB MX35_INT_MLB #define MXC_INT_SPDIF MX35_INT_SPDIF #define MXC_INT_FEC MX35_INT_FEC +#endif + +#endif /* ifndef __MACH_MX35_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index be69272407a..7a356de385f 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -8,8 +8,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_MXC_MX31_H__ -#define __ASM_ARCH_MXC_MX31_H__ +#ifndef __MACH_MX3x_H__ +#define __MACH_MX3x_H__ /* * MX31 memory map: @@ -269,6 +269,7 @@ static inline int mx31_revision(void) } #endif +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR #define L2CC_SIZE MX3x_L2CC_SIZE @@ -401,5 +402,6 @@ static inline int mx31_revision(void) #define CHIP_REV_3_2 MX3x_CHIP_REV_3_2 #define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN #define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM +#endif -#endif /* __ASM_ARCH_MXC_MX31_H__ */ +#endif /* ifndef __MACH_MX3x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h new file mode 100644 index 00000000000..771532b6b4a --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -0,0 +1,454 @@ +#ifndef __ASM_ARCH_MXC_MX51_H__ +#define __ASM_ARCH_MXC_MX51_H__ + +/* + * MX51 memory map: + * + * + * Virt Phys Size What + * --------------------------------------------------------------------------- + * FA3E0000 1FFE0000 128K IRAM (SCCv2 RAM) + * 30000000 256M GPU + * 40000000 512M IPU + * FA200000 60000000 1M DEBUG + * FB100000 70000000 1M SPBA 0 + * FB000000 73F00000 1M AIPS 1 + * FB200000 83F00000 1M AIPS 2 + * FA100000 8FFFC000 16K TZIC (interrupt controller) + * 90000000 256M CSD0 SDRAM/DDR + * A0000000 256M CSD1 SDRAM/DDR + * B0000000 128M CS0 Flash + * B8000000 128M CS1 Flash + * C0000000 128M CS2 Flash + * C8000000 64M CS3 Flash + * CC000000 32M CS4 SRAM + * CE000000 32M CS5 SRAM + * F9000000 CFFF0000 64K NFC (NAND Flash AXI) + * + */ + +/* + * IRAM + */ +#define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ +#define MX51_IRAM_BASE_ADDR_VIRT 0xFA3E0000 +#define MX51_IRAM_PARTITIONS 16 +#define MX51_IRAM_PARTITIONS_TO1 12 +#define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */ + +/* + * NFC + */ +#define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */ +#define MX51_NFC_AXI_BASE_ADDR_VIRT 0xF9000000 +#define MX51_NFC_AXI_SIZE SZ_64K + +/* + * Graphics Memory of GPU + */ +#define MX51_GPU_BASE_ADDR 0x20000000 +#define MX51_GPU2D_BASE_ADDR 0xD0000000 + +#define MX51_TZIC_BASE_ADDR 0x8FFFC000 +#define MX51_TZIC_BASE_ADDR_VIRT 0xFA100000 +#define MX51_TZIC_SIZE SZ_16K + +#define MX51_DEBUG_BASE_ADDR 0x60000000 +#define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000 +#define MX51_DEBUG_SIZE SZ_1M +#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00001000) +#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00002000) +#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00003000) +#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00004000) +#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00005000) +#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00006000) +#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00007000) +#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00008000) + +/* + * SPBA global module enabled #0 + */ +#define MX51_SPBA0_BASE_ADDR 0x70000000 +#define MX51_SPBA0_BASE_ADDR_VIRT 0xFB100000 +#define MX51_SPBA0_SIZE SZ_1M + +#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00004000) +#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00008000) +#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0000C000) +#define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00010000) +#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00014000) +#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00020000) +#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00024000) +#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00028000) +#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00030000) +#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00034000) +#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00038000) +#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0003C000) + +/* + * defines for SPBA modules + */ +#define MX51_SPBA_SDHC1 0x04 +#define MX51_SPBA_SDHC2 0x08 +#define MX51_SPBA_UART3 0x0C +#define MX51_SPBA_CSPI1 0x10 +#define MX51_SPBA_SSI2 0x14 +#define MX51_SPBA_SDHC3 0x20 +#define MX51_SPBA_SDHC4 0x24 +#define MX51_SPBA_SPDIF 0x28 +#define MX51_SPBA_ATA 0x30 +#define MX51_SPBA_SLIM 0x34 +#define MX51_SPBA_HSI2C 0x38 +#define MX51_SPBA_CTRL 0x3C + +/* + * AIPS 1 + */ +#define MX51_AIPS1_BASE_ADDR 0x73F00000 +#define MX51_AIPS1_BASE_ADDR_VIRT 0xFB000000 +#define MX51_AIPS1_SIZE SZ_1M + +#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00080000) +#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00084000) +#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00088000) +#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0008C000) +#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00090000) +#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00094000) +#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00098000) +#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0009C000) +#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A0000) +#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A4000) +#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A8000) +#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000AC000) +#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B0000) +#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B4000) +#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B8000) +#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000BC000) +#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000C0000) +#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D0000) +#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D4000) +#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D8000) + +/* + * Defines for modules using static and dynamic DMA channels + */ +#define MX51_MXC_DMA_CHANNEL_IRAM 30 +#define MX51_MXC_DMA_CHANNEL_SPDIF_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART1_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART1_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART2_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART2_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART3_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART3_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_MMC1 MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_MMC2 MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_SSI1_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_SSI1_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_SSI2_RX MXC_DMA_DYNAMIC_CHANNEL +#ifdef CONFIG_SDMA_IRAM +#define MX51_MXC_DMA_CHANNEL_SSI2_TX (MX51_MXC_DMA_CHANNEL_IRAM + 1) +#else /*CONFIG_SDMA_IRAM */ +#define MX51_MXC_DMA_CHANNEL_SSI2_TX MXC_DMA_DYNAMIC_CHANNEL +#endif /*CONFIG_SDMA_IRAM */ +#define MX51_MXC_DMA_CHANNEL_CSPI1_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI1_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI2_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI2_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI3_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI3_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_ATA_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL + +/* + * AIPS 2 + */ +#define MX51_AIPS2_BASE_ADDR 0x83F00000 +#define MX51_AIPS2_BASE_ADDR_VIRT 0xFB200000 +#define MX51_AIPS2_SIZE SZ_1M + +#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00080000) +#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00084000) +#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00088000) +#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00094000) +#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00098000) +#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x0009C000) +#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A0000) +#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A4000) +#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A8000) +#define MX51_CSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000AC000) +#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B0000) +#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B4000) +#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B8000) +#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000BC000) +#define MX51_CSPI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C0000) +#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C4000) +#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C8000) +#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000CC000) +#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D0000) +#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D8000) +#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D9000) +#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DA000) +#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DB000) +#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DBF00) +#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DC000) +#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E0000) +#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E4000) +#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E8000) +#define MX51_MXC_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000EC000) +#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F0000) +#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F4000) +#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F8000) + +/* + * Memory regions and CS + */ +#define MX51_GPU_CTRL_BASE_ADDR 0x30000000 +#define MX51_IPU_CTRL_BASE_ADDR 0x40000000 +#define MX51_CSD0_BASE_ADDR 0x90000000 +#define MX51_CSD1_BASE_ADDR 0xA0000000 +#define MX51_CS0_BASE_ADDR 0xB0000000 +#define MX51_CS1_BASE_ADDR 0xB8000000 +#define MX51_CS2_BASE_ADDR 0xC0000000 +#define MX51_CS3_BASE_ADDR 0xC8000000 +#define MX51_CS4_BASE_ADDR 0xCC000000 +#define MX51_CS5_BASE_ADDR 0xCE000000 + +/* Does given address belongs to the specified memory region? */ +#define ADDRESS_IN_REGION(addr, start, size) \ + (((addr) >= (start)) && ((addr) < (start)+(size))) + +/* Does given address belongs to the specified named `module'? */ +#define MX51_IS_MODULE(addr, module) \ + ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \ + MX51_ ## module ## _SIZE) +/* + * This macro defines the physical to virtual address mapping for all the + * peripheral modules. It is used by passing in the physical address as x + * and returning the virtual address. If the physical address is not mapped, + * it returns 0xDEADBEEF + */ + +#define MX51_IO_ADDRESS(x) \ + (void __iomem *) \ + (MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \ + 0xDEADBEEF) + +/* + * define the address mapping macros: in physical address order + */ +#define MX51_IRAM_IO_ADDRESS(x) \ + (((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT) + +#define MX51_TZIC_IO_ADDRESS(x) \ + (((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT) + +#define MX51_DEBUG_IO_ADDRESS(x) \ + (((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT) + +#define MX51_SPBA0_IO_ADDRESS(x) \ + (((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT) + +#define MX51_AIPS1_IO_ADDRESS(x) \ + (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT) + +#define MX51_AIPS2_IO_ADDRESS(x) \ + (((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT) + +#define MX51_NFC_AXI_IO_ADDRESS(x) \ + (((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT) + +#define MX51_IS_MEM_DEVICE_NONSHARED(x) 0 + +/* + * DMA request assignments + */ +#define MX51_DMA_REQ_SSI3_TX1 47 +#define MX51_DMA_REQ_SSI3_RX1 46 +#define MX51_DMA_REQ_SPDIF 45 +#define MX51_DMA_REQ_UART3_TX 44 +#define MX51_DMA_REQ_UART3_RX 43 +#define MX51_DMA_REQ_SLIM_B_TX 42 +#define MX51_DMA_REQ_SDHC4 41 +#define MX51_DMA_REQ_SDHC3 40 +#define MX51_DMA_REQ_CSPI_TX 39 +#define MX51_DMA_REQ_CSPI_RX 38 +#define MX51_DMA_REQ_SSI3_TX2 37 +#define MX51_DMA_REQ_IPU 36 +#define MX51_DMA_REQ_SSI3_RX2 35 +#define MX51_DMA_REQ_EPIT2 34 +#define MX51_DMA_REQ_CTI2_1 33 +#define MX51_DMA_REQ_EMI_WR 32 +#define MX51_DMA_REQ_CTI2_0 31 +#define MX51_DMA_REQ_EMI_RD 30 +#define MX51_DMA_REQ_SSI1_TX1 29 +#define MX51_DMA_REQ_SSI1_RX1 28 +#define MX51_DMA_REQ_SSI1_TX2 27 +#define MX51_DMA_REQ_SSI1_RX2 26 +#define MX51_DMA_REQ_SSI2_TX1 25 +#define MX51_DMA_REQ_SSI2_RX1 24 +#define MX51_DMA_REQ_SSI2_TX2 23 +#define MX51_DMA_REQ_SSI2_RX2 22 +#define MX51_DMA_REQ_SDHC2 21 +#define MX51_DMA_REQ_SDHC1 20 +#define MX51_DMA_REQ_UART1_TX 19 +#define MX51_DMA_REQ_UART1_RX 18 +#define MX51_DMA_REQ_UART2_TX 17 +#define MX51_DMA_REQ_UART2_RX 16 +#define MX51_DMA_REQ_GPU 15 +#define MX51_DMA_REQ_EXTREQ1 14 +#define MX51_DMA_REQ_FIRI_TX 13 +#define MX51_DMA_REQ_FIRI_RX 12 +#define MX51_DMA_REQ_HS_I2C_RX 11 +#define MX51_DMA_REQ_HS_I2C_TX 10 +#define MX51_DMA_REQ_CSPI2_TX 9 +#define MX51_DMA_REQ_CSPI2_RX 8 +#define MX51_DMA_REQ_CSPI1_TX 7 +#define MX51_DMA_REQ_CSPI1_RX 6 +#define MX51_DMA_REQ_SLIM_B 5 +#define MX51_DMA_REQ_ATA_TX_END 4 +#define MX51_DMA_REQ_ATA_TX 3 +#define MX51_DMA_REQ_ATA_RX 2 +#define MX51_DMA_REQ_GPC 1 +#define MX51_DMA_REQ_VPU 0 + +/* + * Interrupt numbers + */ +#define MX51_MXC_INT_BASE 0 +#define MX51_MXC_INT_RESV0 0 +#define MX51_MXC_INT_MMC_SDHC1 1 +#define MX51_MXC_INT_MMC_SDHC2 2 +#define MX51_MXC_INT_MMC_SDHC3 3 +#define MX51_MXC_INT_MMC_SDHC4 4 +#define MX51_MXC_INT_RESV5 5 +#define MX51_MXC_INT_SDMA 6 +#define MX51_MXC_INT_IOMUX 7 +#define MX51_MXC_INT_NFC 8 +#define MX51_MXC_INT_VPU 9 +#define MX51_MXC_INT_IPU_ERR 10 +#define MX51_MXC_INT_IPU_SYN 11 +#define MX51_MXC_INT_GPU 12 +#define MX51_MXC_INT_RESV13 13 +#define MX51_MXC_INT_USB_H1 14 +#define MX51_MXC_INT_EMI 15 +#define MX51_MXC_INT_USB_H2 16 +#define MX51_MXC_INT_USB_H3 17 +#define MX51_MXC_INT_USB_OTG 18 +#define MX51_MXC_INT_SAHARA_H0 19 +#define MX51_MXC_INT_SAHARA_H1 20 +#define MX51_MXC_INT_SCC_SMN 21 +#define MX51_MXC_INT_SCC_STZ 22 +#define MX51_MXC_INT_SCC_SCM 23 +#define MX51_MXC_INT_SRTC_NTZ 24 +#define MX51_MXC_INT_SRTC_TZ 25 +#define MX51_MXC_INT_RTIC 26 +#define MX51_MXC_INT_CSU 27 +#define MX51_MXC_INT_SLIM_B 28 +#define MX51_MXC_INT_SSI1 29 +#define MX51_MXC_INT_SSI2 30 +#define MX51_MXC_INT_UART1 31 +#define MX51_MXC_INT_UART2 32 +#define MX51_MXC_INT_UART3 33 +#define MX51_MXC_INT_RESV34 34 +#define MX51_MXC_INT_RESV35 35 +#define MX51_MXC_INT_CSPI1 36 +#define MX51_MXC_INT_CSPI2 37 +#define MX51_MXC_INT_CSPI 38 +#define MX51_MXC_INT_GPT 39 +#define MX51_MXC_INT_EPIT1 40 +#define MX51_MXC_INT_EPIT2 41 +#define MX51_MXC_INT_GPIO1_INT7 42 +#define MX51_MXC_INT_GPIO1_INT6 43 +#define MX51_MXC_INT_GPIO1_INT5 44 +#define MX51_MXC_INT_GPIO1_INT4 45 +#define MX51_MXC_INT_GPIO1_INT3 46 +#define MX51_MXC_INT_GPIO1_INT2 47 +#define MX51_MXC_INT_GPIO1_INT1 48 +#define MX51_MXC_INT_GPIO1_INT0 49 +#define MX51_MXC_INT_GPIO1_LOW 50 +#define MX51_MXC_INT_GPIO1_HIGH 51 +#define MX51_MXC_INT_GPIO2_LOW 52 +#define MX51_MXC_INT_GPIO2_HIGH 53 +#define MX51_MXC_INT_GPIO3_LOW 54 +#define MX51_MXC_INT_GPIO3_HIGH 55 +#define MX51_MXC_INT_GPIO4_LOW 56 +#define MX51_MXC_INT_GPIO4_HIGH 57 +#define MX51_MXC_INT_WDOG1 58 +#define MX51_MXC_INT_WDOG2 59 +#define MX51_MXC_INT_KPP 60 +#define MX51_MXC_INT_PWM1 61 +#define MX51_MXC_INT_I2C1 62 +#define MX51_MXC_INT_I2C2 63 +#define MX51_MXC_INT_HS_I2C 64 +#define MX51_MXC_INT_RESV65 65 +#define MX51_MXC_INT_RESV66 66 +#define MX51_MXC_INT_SIM_IPB 67 +#define MX51_MXC_INT_SIM_DAT 68 +#define MX51_MXC_INT_IIM 69 +#define MX51_MXC_INT_ATA 70 +#define MX51_MXC_INT_CCM1 71 +#define MX51_MXC_INT_CCM2 72 +#define MX51_MXC_INT_GPC1 73 +#define MX51_MXC_INT_GPC2 74 +#define MX51_MXC_INT_SRC 75 +#define MX51_MXC_INT_NM 76 +#define MX51_MXC_INT_PMU 77 +#define MX51_MXC_INT_CTI_IRQ 78 +#define MX51_MXC_INT_CTI1_TG0 79 +#define MX51_MXC_INT_CTI1_TG1 80 +#define MX51_MXC_INT_MCG_ERR 81 +#define MX51_MXC_INT_MCG_TMR 82 +#define MX51_MXC_INT_MCG_FUNC 83 +#define MX51_MXC_INT_GPU2_IRQ 84 +#define MX51_MXC_INT_GPU2_BUSY 85 +#define MX51_MXC_INT_RESV86 86 +#define MX51_MXC_INT_FEC 87 +#define MX51_MXC_INT_OWIRE 88 +#define MX51_MXC_INT_CTI1_TG2 89 +#define MX51_MXC_INT_SJC 90 +#define MX51_MXC_INT_SPDIF 91 +#define MX51_MXC_INT_TVE 92 +#define MX51_MXC_INT_FIRI 93 +#define MX51_MXC_INT_PWM2 94 +#define MX51_MXC_INT_SLIM_EXP 95 +#define MX51_MXC_INT_SSI3 96 +#define MX51_MXC_INT_EMI_BOOT 97 +#define MX51_MXC_INT_CTI1_TG3 98 +#define MX51_MXC_INT_SMC_RX 99 +#define MX51_MXC_INT_VPU_IDLE 100 +#define MX51_MXC_INT_EMI_NFC 101 +#define MX51_MXC_INT_GPU_IDLE 102 + +/* silicon revisions specific to i.MX51 */ +#define MX51_CHIP_REV_1_0 0x10 +#define MX51_CHIP_REV_1_1 0x11 +#define MX51_CHIP_REV_1_2 0x12 +#define MX51_CHIP_REV_1_3 0x13 +#define MX51_CHIP_REV_2_0 0x20 +#define MX51_CHIP_REV_2_1 0x21 +#define MX51_CHIP_REV_2_2 0x22 +#define MX51_CHIP_REV_2_3 0x23 +#define MX51_CHIP_REV_3_0 0x30 +#define MX51_CHIP_REV_3_1 0x31 +#define MX51_CHIP_REV_3_2 0x32 + +/* Mandatory defines used globally */ + +#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) + +extern unsigned int system_rev; + +static inline unsigned int mx51_revision(void) +{ + return system_rev; +} +#endif + +#endif /* __ASM_ARCH_MXC_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 51990536b84..a790bf21297 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -30,6 +30,7 @@ #define MXC_CPU_MX27 27 #define MXC_CPU_MX31 31 #define MXC_CPU_MX35 35 +#define MXC_CPU_MX51 51 #define MXC_CPU_MXC91231 91231 #ifndef __ASSEMBLY__ @@ -108,6 +109,18 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx35() (0) #endif +#ifdef CONFIG_ARCH_MX5 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX51 +# endif +# define cpu_is_mx51() (mxc_cpu_type == MXC_CPU_MX51) +#else +# define cpu_is_mx51() (0) +#endif + #ifdef CONFIG_ARCH_MXC91231 # ifdef mxc_cpu_type # undef mxc_cpu_type @@ -121,9 +134,10 @@ extern unsigned int __mxc_cpu_type; #endif #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2) -#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10) -#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4) -#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8) +/* These are deprecated, use mx[23][157]_setup_weimcs instead. */ +#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10)) +#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4)) +#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8)) #endif #define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231()) diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h index 81484d1ef23..5182b986b78 100644 --- a/arch/arm/plat-mxc/include/mach/mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/mxc91231.h @@ -184,60 +184,22 @@ #define MXC91231_CS4_BASE_ADDR 0xB4000000 #define MXC91231_CS5_BASE_ADDR 0xB6000000 -/* Is given address belongs to the specified memory region? */ -#define ADDRESS_IN_REGION(addr, start, size) \ - (((addr) >= (start)) && ((addr) < (start)+(size))) - -/* Is given address belongs to the specified named `module'? */ -#define MXC91231_IS_MODULE(addr, module) \ - ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \ - MXC91231_ ## module ## _SIZE) /* * This macro defines the physical to virtual address mapping for all the * peripheral modules. It is used by passing in the physical address as x * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ - -#define MXC91231_IO_ADDRESS(x) \ - (void __iomem *) \ - (MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \ - 0xDEADBEEF) - - -/* - * define the address mapping macros: in physical address order + * it returns 0. */ -#define MXC91231_L2CC_IO_ADDRESS(x) \ - (((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT) - -#define MXC91231_AIPS1_IO_ADDRESS(x) \ - (((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT) - -#define MXC91231_SPBA0_IO_ADDRESS(x) \ - (((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT) - -#define MXC91231_SPBA1_IO_ADDRESS(x) \ - (((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT) - -#define MXC91231_AIPS2_IO_ADDRESS(x) \ - (((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT) - -#define MXC91231_ROMP_IO_ADDRESS(x) \ - (((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT) - -#define MXC91231_AVIC_IO_ADDRESS(x) \ - (((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT) -#define MXC91231_X_MEMC_IO_ADDRESS(x) \ - (((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT) +#define MXC91231_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MXC91231_L2CC) ?: \ + IMX_IO_ADDRESS(x, MXC91231_X_MEMC) ?: \ + IMX_IO_ADDRESS(x, MXC91231_ROMP) ?: \ + IMX_IO_ADDRESS(x, MXC91231_AVIC) ?: \ + IMX_IO_ADDRESS(x, MXC91231_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MXC91231_SPBA0) ?: \ + IMX_IO_ADDRESS(x, MXC91231_SPBA1) ?: \ + IMX_IO_ADDRESS(x, MXC91231_AIPS2)) /* * Interrupt numbers diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h index 8f796239393..4b9b8368c0c 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -22,6 +22,10 @@ #define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) #define MXC_EHCI_TTL_ENABLED (1 << 6) +#define MXC_EHCI_INTERNAL_PHY (1 << 7) +#define MXC_EHCI_IPPUE_DOWN (1 << 8) +#define MXC_EHCI_IPPUE_UP (1 << 9) + struct mxc_usbh_platform_data { int (*init)(struct platform_device *pdev); int (*exit)(struct platform_device *pdev); diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h new file mode 100644 index 00000000000..c34ded523f1 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/ssi.h @@ -0,0 +1,18 @@ +#ifndef __MACH_SSI_H +#define __MACH_SSI_H + +struct snd_ac97; + +extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end; +extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer; + +struct imx_ssi_platform_data { + unsigned int flags; +#define IMX_SSI_DMA (1 << 0) +#define IMX_SSI_USE_AC97 (1 << 1) + void (*ac97_reset) (struct snd_ac97 *ac97); + void (*ac97_warm_reset)(struct snd_ac97 *ac97); +}; + +#endif /* __MACH_SSI_H */ + diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h index 527a6c24788..024416ed11c 100644 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ b/arch/arm/plat-mxc/include/mach/timex.h @@ -28,6 +28,8 @@ #define CLOCK_TICK_RATE 16625000 #elif defined CONFIG_ARCH_MX25 #define CLOCK_TICK_RATE 16000000 +#elif defined CONFIG_ARCH_MX5 +#define CLOCK_TICK_RATE 8000000 #elif defined CONFIG_ARCH_MXC91231 #define CLOCK_TICK_RATE 13000000 #endif diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index d49384cb1e9..52e476a150c 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -1,8 +1,6 @@ /* * arch/arm/plat-mxc/include/mach/uncompress.h * - * - * * Copyright (C) 1999 ARM Limited * Copyright (C) Shane Nay (shane@minirl.com) * @@ -25,7 +23,6 @@ #define __MXC_BOOT_UNCOMPRESS -#include <mach/hardware.h> #include <asm/mach-types.h> static unsigned long uart_base; diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c deleted file mode 100644 index a37163ce280..00000000000 --- a/arch/arm/plat-mxc/iomux-mx1-mx2.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * arch/arm/mach-mxc/generic.c - * - * author: Sascha Hauer - * Created: april 20th, 2004 - * Copyright: Synertronixx GmbH - * - * Common code for i.MX machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/gpio.h> - -#include <mach/hardware.h> -#include <asm/mach/map.h> -#include <mach/iomux.h> - -void mxc_gpio_mode(int gpio_mode) -{ - unsigned int pin = gpio_mode & GPIO_PIN_MASK; - unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; - unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; - unsigned int tmp; - - /* Pullup enable */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_PUEN(port)); - if (gpio_mode & GPIO_PUEN) - tmp |= (1 << pin); - else - tmp &= ~(1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_PUEN(port)); - - /* Data direction */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_DDIR(port)); - if (gpio_mode & GPIO_OUT) - tmp |= 1 << pin; - else - tmp &= ~(1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_DDIR(port)); - - /* Primary / alternate function */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_GPR(port)); - if (gpio_mode & GPIO_AF) - tmp |= (1 << pin); - else - tmp &= ~(1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_GPR(port)); - - /* use as gpio? */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_GIUS(port)); - if (gpio_mode & (GPIO_PF | GPIO_AF)) - tmp &= ~(1 << pin); - else - tmp |= (1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port)); - - if (pin < 16) { - tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= (ocr << (pin * 2)); - __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA1(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB1(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port)); - } else { - pin -= 16; - - tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= (ocr << (pin * 2)); - __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA2(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB2(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB2(port)); - } -} -EXPORT_SYMBOL(mxc_gpio_mode); - -int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - const char *label) -{ - const int *p = pin_list; - int i; - unsigned gpio; - unsigned mode; - int ret = -EINVAL; - - for (i = 0; i < count; i++) { - gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK); - - if (gpio >= (GPIO_PORT_MAX + 1) * 32) - goto setup_error; - - ret = gpio_request(gpio, label); - if (ret) - goto setup_error; - - mxc_gpio_mode(gpio | mode); - - p++; - } - return 0; - -setup_error: - mxc_gpio_release_multiple_pins(pin_list, i); - return ret; -} -EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); - -void mxc_gpio_release_multiple_pins(const int *pin_list, int count) -{ - const int *p = pin_list; - int i; - - for (i = 0; i < count; i++) { - unsigned gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - gpio_free(gpio); - p++; - } - -} -EXPORT_SYMBOL(mxc_gpio_release_multiple_pins); - diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/plat-mxc/iomux-v1.c new file mode 100644 index 00000000000..960a02cbcba --- /dev/null +++ b/arch/arm/plat-mxc/iomux-v1.c @@ -0,0 +1,238 @@ +/* + * arch/arm/plat-mxc/iomux-v1.c + * + * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH + * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix + * + * Common code for i.MX1, i.MX21 and i.MX27 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <asm/mach/map.h> +#include <mach/iomux-v1.h> + +static void __iomem *imx_iomuxv1_baseaddr; +static unsigned imx_iomuxv1_numports; + +static inline unsigned long imx_iomuxv1_readl(unsigned offset) +{ + return __raw_readl(imx_iomuxv1_baseaddr + offset); +} + +static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset) +{ + __raw_writel(val, imx_iomuxv1_baseaddr + offset); +} + +static inline void imx_iomuxv1_rmwl(unsigned offset, + unsigned long mask, unsigned long value) +{ + unsigned long reg = imx_iomuxv1_readl(offset); + + reg &= ~mask; + reg |= value; + + imx_iomuxv1_writel(reg, offset); +} + +static inline void imx_iomuxv1_set_puen( + unsigned int port, unsigned int pin, int on) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0); +} + +static inline void imx_iomuxv1_set_ddir( + unsigned int port, unsigned int pin, int out) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0); +} + +static inline void imx_iomuxv1_set_gpr( + unsigned int port, unsigned int pin, int af) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0); +} + +static inline void imx_iomuxv1_set_gius( + unsigned int port, unsigned int pin, int inuse) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0); +} + +static inline void imx_iomuxv1_set_ocr( + unsigned int port, unsigned int pin, unsigned int ocr) +{ + unsigned long shift = (pin & 0xf) << 1; + unsigned long mask = 3 << shift; + unsigned long value = ocr << shift; + unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port); + + imx_iomuxv1_rmwl(offset, mask, value); +} + +static inline void imx_iomuxv1_set_iconfa( + unsigned int port, unsigned int pin, unsigned int aout) +{ + unsigned long shift = (pin & 0xf) << 1; + unsigned long mask = 3 << shift; + unsigned long value = aout << shift; + unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port); + + imx_iomuxv1_rmwl(offset, mask, value); +} + +static inline void imx_iomuxv1_set_iconfb( + unsigned int port, unsigned int pin, unsigned int bout) +{ + unsigned long shift = (pin & 0xf) << 1; + unsigned long mask = 3 << shift; + unsigned long value = bout << shift; + unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port); + + imx_iomuxv1_rmwl(offset, mask, value); +} + +int mxc_gpio_mode(int gpio_mode) +{ + unsigned int pin = gpio_mode & GPIO_PIN_MASK; + unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; + unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; + unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3; + unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3; + + if (port >= imx_iomuxv1_numports) + return -EINVAL; + + /* Pullup enable */ + imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN); + + /* Data direction */ + imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT); + + /* Primary / alternate function */ + imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF); + + /* use as gpio? */ + imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF))); + + imx_iomuxv1_set_ocr(port, pin, ocr); + + imx_iomuxv1_set_iconfa(port, pin, aout); + + imx_iomuxv1_set_iconfb(port, pin, bout); + + return 0; +} +EXPORT_SYMBOL(mxc_gpio_mode); + +static int imx_iomuxv1_setup_multiple(const int *list, unsigned count) +{ + size_t i; + int ret; + + for (i = 0; i < count; ++i) { + ret = mxc_gpio_mode(list[i]); + + if (ret) + return ret; + } + + return ret; +} + +int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, + const char *label) +{ + size_t i; + int ret; + + for (i = 0; i < count; ++i) { + unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK); + + ret = gpio_request(gpio, label); + if (ret) + goto err_gpio_request; + } + + ret = imx_iomuxv1_setup_multiple(pin_list, count); + if (ret) + goto err_setup; + + return 0; + +err_setup: + BUG_ON(i != count); + +err_gpio_request: + mxc_gpio_release_multiple_pins(pin_list, i); + + return ret; +} +EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); + +void mxc_gpio_release_multiple_pins(const int *pin_list, int count) +{ + size_t i; + + for (i = 0; i < count; ++i) { + unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK); + + gpio_free(gpio); + } +} +EXPORT_SYMBOL(mxc_gpio_release_multiple_pins); + +static int imx_iomuxv1_init(void) +{ +#ifdef CONFIG_ARCH_MX1 + if (cpu_is_mx1()) { + imx_iomuxv1_baseaddr = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR); + imx_iomuxv1_numports = MX1_NUM_GPIO_PORT; + } else +#endif +#ifdef CONFIG_MACH_MX21 + if (cpu_is_mx21()) { + imx_iomuxv1_baseaddr = MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR); + imx_iomuxv1_numports = MX21_NUM_GPIO_PORT; + } else +#endif +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) { + imx_iomuxv1_baseaddr = MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR); + imx_iomuxv1_numports = MX27_NUM_GPIO_PORT; + } else +#endif + return -ENODEV; + + return 0; +} +pure_initcall(imx_iomuxv1_init); diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 844567ee35f..c1ce51abdba 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -30,9 +30,15 @@ #include <asm/mach/time.h> #include <mach/common.h> +/* + * There are 2 versions of the timer hardware on Freescale MXC hardware. + * Version 1: MX1/MXL, MX21, MX27. + * Version 2: MX25, MX31, MX35, MX37, MX51 + */ + /* defines common for all i.MX */ #define MXC_TCTL 0x00 -#define MXC_TCTL_TEN (1 << 0) +#define MXC_TCTL_TEN (1 << 0) /* Enable module */ #define MXC_TPRER 0x04 /* MX1, MX21, MX27 */ @@ -47,8 +53,8 @@ #define MX2_TSTAT_CAPT (1 << 1) #define MX2_TSTAT_COMP (1 << 0) -/* MX31, MX35, MX25, MXC91231 */ -#define MX3_TCTL_WAITEN (1 << 3) +/* MX31, MX35, MX25, MXC91231, MX5 */ +#define MX3_TCTL_WAITEN (1 << 3) /* Wait enable mode */ #define MX3_TCTL_CLK_IPG (1 << 6) #define MX3_TCTL_FRR (1 << 9) #define MX3_IR 0x0c @@ -57,6 +63,9 @@ #define MX3_TCN 0x24 #define MX3_TCMP 0x10 +#define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) +#define timer_is_v2() (!timer_is_v1()) + static struct clock_event_device clockevent_mxc; static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; @@ -66,7 +75,7 @@ static inline void gpt_irq_disable(void) { unsigned int tmp; - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) __raw_writel(0, timer_base + MX3_IR); else { tmp = __raw_readl(timer_base + MXC_TCTL); @@ -76,7 +85,7 @@ static inline void gpt_irq_disable(void) static inline void gpt_irq_enable(void) { - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) __raw_writel(1<<0, timer_base + MX3_IR); else { __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN, @@ -86,11 +95,13 @@ static inline void gpt_irq_enable(void) static void gpt_irq_acknowledge(void) { - if (cpu_is_mx1()) - __raw_writel(0, timer_base + MX1_2_TSTAT); - if (cpu_is_mx2()) - __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT); - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v1()) { + if (cpu_is_mx1()) + __raw_writel(0, timer_base + MX1_2_TSTAT); + else + __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, + timer_base + MX1_2_TSTAT); + } else if (timer_is_v2()) __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT); } @@ -117,7 +128,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) clocksource_mxc.read = mx3_get_cycles; clocksource_mxc.mult = clocksource_hz2mult(c, @@ -180,7 +191,7 @@ static void mxc_set_mode(enum clock_event_mode mode, if (mode != clockevent_mode) { /* Set event time into far-far future */ - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3, timer_base + MX3_TCMP); else @@ -233,7 +244,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) struct clock_event_device *evt = &clockevent_mxc; uint32_t tstat; - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) tstat = __raw_readl(timer_base + MX3_TSTAT); else tstat = __raw_readl(timer_base + MX1_2_TSTAT); @@ -264,7 +275,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) clockevent_mxc.set_next_event = mx3_set_next_event; clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC, @@ -296,7 +307,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) __raw_writel(0, timer_base + MXC_TCTL); __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN; else tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c new file mode 100644 index 00000000000..afa6709db0b --- /dev/null +++ b/arch/arm/plat-mxc/tzic.c @@ -0,0 +1,172 @@ +/* + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/io.h> + +#include <asm/mach/irq.h> + +#include <mach/hardware.h> + +/* + ***************************************** + * TZIC Registers * + ***************************************** + */ + +#define TZIC_INTCNTL 0x0000 /* Control register */ +#define TZIC_INTTYPE 0x0004 /* Controller Type register */ +#define TZIC_IMPID 0x0008 /* Distributor Implementer Identification */ +#define TZIC_PRIOMASK 0x000C /* Priority Mask Reg */ +#define TZIC_SYNCCTRL 0x0010 /* Synchronizer Control register */ +#define TZIC_DSMINT 0x0014 /* DSM interrupt Holdoffregister */ +#define TZIC_INTSEC0(i) (0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */ +#define TZIC_ENSET0(i) (0x0100 + ((i) << 2)) /* Enable Set Reg 0 */ +#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */ +#define TZIC_SRCSET0 0x0200 /* Source Set Register 0 */ +#define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */ +#define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */ +#define TZIC_PND0 0x0D00 /* Pending Register 0 */ +#define TZIC_HIPND0 0x0D80 /* High Priority Pending Register */ +#define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */ +#define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */ +#define TZIC_ID0 0x0FD0 /* Indentification Register 0 */ + +void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */ + +/** + * tzic_mask_irq() - Disable interrupt number "irq" in the TZIC + * + * @param irq interrupt source number + */ +static void tzic_mask_irq(unsigned int irq) +{ + int index, off; + + index = irq >> 5; + off = irq & 0x1F; + __raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index)); +} + +/** + * tzic_unmask_irq() - Enable interrupt number "irq" in the TZIC + * + * @param irq interrupt source number + */ +static void tzic_unmask_irq(unsigned int irq) +{ + int index, off; + + index = irq >> 5; + off = irq & 0x1F; + __raw_writel(1 << off, tzic_base + TZIC_ENSET0(index)); +} + +static unsigned int wakeup_intr[4]; + +/** + * tzic_set_wake_irq() - Set interrupt number "irq" in the TZIC as a wake-up source. + * + * @param irq interrupt source number + * @param enable enable as wake-up if equal to non-zero + * disble as wake-up if equal to zero + * + * @return This function returns 0 on success. + */ +static int tzic_set_wake_irq(unsigned int irq, unsigned int enable) +{ + unsigned int index, off; + + index = irq >> 5; + off = irq & 0x1F; + + if (index > 3) + return -EINVAL; + + if (enable) + wakeup_intr[index] |= (1 << off); + else + wakeup_intr[index] &= ~(1 << off); + + return 0; +} + +static struct irq_chip mxc_tzic_chip = { + .name = "MXC_TZIC", + .ack = tzic_mask_irq, + .mask = tzic_mask_irq, + .unmask = tzic_unmask_irq, + .set_wake = tzic_set_wake_irq, +}; + +/* + * This function initializes the TZIC hardware and disables all the + * interrupts. It registers the interrupt enable and disable functions + * to the kernel for each interrupt source. + */ +void __init tzic_init_irq(void __iomem *irqbase) +{ + int i; + + tzic_base = irqbase; + /* put the TZIC into the reset value with + * all interrupts disabled + */ + i = __raw_readl(tzic_base + TZIC_INTCNTL); + + __raw_writel(0x80010001, tzic_base + TZIC_INTCNTL); + __raw_writel(0x1f, tzic_base + TZIC_PRIOMASK); + __raw_writel(0x02, tzic_base + TZIC_SYNCCTRL); + + for (i = 0; i < 4; i++) + __raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i)); + + /* disable all interrupts */ + for (i = 0; i < 4; i++) + __raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i)); + + /* all IRQ no FIQ Warning :: No selection */ + + for (i = 0; i < MXC_INTERNAL_IRQS; i++) { + set_irq_chip(i, &mxc_tzic_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + + pr_info("TrustZone Interrupt Controller (TZIC) initialized\n"); +} + +/** + * tzic_enable_wake() - enable wakeup interrupt + * + * @param is_idle 1 if called in idle loop (ENSET0 register); + * 0 to be used when called from low power entry + * @return 0 if successful; non-zero otherwise + */ +int tzic_enable_wake(int is_idle) +{ + unsigned int i, v; + + __raw_writel(1, tzic_base + TZIC_DSMINT); + if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0)) + return -EAGAIN; + + for (i = 0; i < 4; i++) { + v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i]; + __raw_writel(v, TZIC_WAKEUP0(i)); + } + + return 0; +} |