diff options
Diffstat (limited to 'arch/arm/plat-nomadik/include/plat/pincfg.h')
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/pincfg.h | 70 |
1 files changed, 55 insertions, 15 deletions
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h index 8c5ae3f2acf..05a3936ae6d 100644 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ b/arch/arm/plat-nomadik/include/plat/pincfg.h @@ -19,16 +19,22 @@ * bit 9..10 - Alternate Function Selection * bit 11..12 - Pull up/down state * bit 13 - Sleep mode behaviour - * bit 14 - (sleep mode) Direction - * bit 15 - (sleep mode) Value (if output) + * bit 14 - Direction + * bit 15 - Value (if output) + * bit 16..18 - SLPM pull up/down state + * bit 19..20 - SLPM direction + * bit 21..22 - SLPM Value (if output) * * to facilitate the definition, the following macros are provided * * PIN_CFG_DEFAULT - default config (0): * pull up/down = disabled * sleep mode = input/wakeup - * (sleep mode) direction = input - * (sleep mode) value = low + * direction = input + * value = low + * SLPM direction = same as normal + * SLPM pull = same as normal + * SLPM value = same as normal * * PIN_CFG - default config with alternate function * PIN_CFG_PULL - default config with alternate function and pull up/down @@ -75,30 +81,64 @@ typedef unsigned long pin_cfg_t; #define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) #define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) -/* Shortcuts. Use these instead of separate DIR and VAL. */ -#define PIN_INPUT PIN_DIR_INPUT +#define PIN_SLPM_PULL_SHIFT 16 +#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL(x) \ + (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_NONE \ + ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_UP \ + ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_DOWN \ + ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) + +#define PIN_SLPM_DIR_SHIFT 19 +#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR(x) \ + (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) + +#define PIN_SLPM_VAL_SHIFT 21 +#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL(x) \ + (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) + +/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ +#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) +#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) +#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) #define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) #define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) -/* - * These are the same as the ones above, but should make more sense to the - * reader when seen along with a setting a pin to AF mode. - */ -#define PIN_SLPM_INPUT PIN_INPUT -#define PIN_SLPM_OUTPUT_LOW PIN_OUTPUT_LOW -#define PIN_SLPM_OUTPUT_HIGH PIN_OUTPUT_HIGH +#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) +#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) +#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) +#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) +#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) -#define PIN_CFG_DEFAULT (PIN_PULL_NONE | PIN_SLPM_INPUT) +#define PIN_CFG_DEFAULT (0) #define PIN_CFG(num, alt) \ (PIN_CFG_DEFAULT |\ (PIN_NUM(num) | PIN_##alt)) +#define PIN_CFG_INPUT(num, alt, pull) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) + +#define PIN_CFG_OUTPUT(num, alt, val) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) + #define PIN_CFG_PULL(num, alt, pull) \ ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\ (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull)) -extern int nmk_config_pin(pin_cfg_t cfg); +extern int nmk_config_pin(pin_cfg_t cfg, bool sleep); extern int nmk_config_pins(pin_cfg_t *cfgs, int num); +extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num); #endif |