diff options
Diffstat (limited to 'arch/arm/plat-omap/gpio.c')
| -rw-r--r-- | arch/arm/plat-omap/gpio.c | 61 |
1 files changed, 60 insertions, 1 deletions
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 04846811d0a..f8dfa8d5e60 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -192,6 +192,7 @@ struct gpio_bank { u32 saved_risingdetect; #endif u32 level_mask; + u32 toggle_mask; spinlock_t lock; struct gpio_chip chip; struct clk *dbck; @@ -749,6 +750,44 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, } #endif +/* + * This only applies to chips that can't do both rising and falling edge + * detection at once. For all other chips, this function is a noop. + */ +static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg = bank->base; + u32 l = 0; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_GPIO_INT_EDGE; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_INT_CONTROL; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_CONTROL; + break; +#endif + default: + return; + } + + l = __raw_readl(reg); + if ((l >> gpio) & 1) + l &= ~(1 << gpio); + else + l |= 1 << gpio; + + __raw_writel(l, reg); +} + static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) { void __iomem *reg = bank->base; @@ -759,6 +798,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); + if (trigger & IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; else if (trigger & IRQ_TYPE_EDGE_FALLING) @@ -771,6 +812,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); + if (trigger & IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; else if (trigger & IRQ_TYPE_EDGE_FALLING) @@ -803,6 +846,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_7XX: reg += OMAP7XX_GPIO_INT_CONTROL; l = __raw_readl(reg); + if (trigger & IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; else if (trigger & IRQ_TYPE_EDGE_FALLING) @@ -1217,7 +1262,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) { void __iomem *isr_reg = NULL; u32 isr; - unsigned int gpio_irq; + unsigned int gpio_irq, gpio_index; struct gpio_bank *bank; u32 retrigger = 0; int unmasked = 0; @@ -1284,9 +1329,23 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) gpio_irq = bank->virtual_irq_start; for (; isr != 0; isr >>= 1, gpio_irq++) { + gpio_index = get_gpio_index(irq_to_gpio(gpio_irq)); + if (!(isr & 1)) continue; +#ifdef CONFIG_ARCH_OMAP1 + /* + * Some chips can't respond to both rising and falling + * at the same time. If this irq was requested with + * both flags, we need to flip the ICR data for the IRQ + * to respond to the IRQ for the opposite direction. + * This will be indicated in the bank toggle_mask. + */ + if (bank->toggle_mask & (1 << gpio_index)) + _toggle_gpio_edge_triggering(bank, gpio_index); +#endif + generic_handle_irq(gpio_irq); } } |