diff options
Diffstat (limited to 'arch/arm/plat-omap/include/mach/mux.h')
| -rw-r--r-- | arch/arm/plat-omap/include/mach/mux.h | 864 |
1 files changed, 0 insertions, 864 deletions
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h deleted file mode 100644 index f3c1d8a9045..00000000000 --- a/arch/arm/plat-omap/include/mach/mux.h +++ /dev/null @@ -1,864 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/mux.h - * - * Table of the Omap register configurations for the FUNC_MUX and - * PULL_DWN combinations. - * - * Copyright (C) 2004 - 2008 Texas Instruments Inc. - * Copyright (C) 2003 - 2008 Nokia Corporation - * - * Written by Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * NOTE: Please use the following naming style for new pin entries. - * For example, W8_1610_MMC2_DAT0, where: - * - W8 = ball - * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 - * - MMC2_DAT0 = function - */ - -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define PU_PD_SEL_NA 0 /* No pu_pd reg available */ -#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */ - -#ifdef CONFIG_OMAP_MUX_DEBUG -#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \ - .mux_reg = FUNC_MUX_CTRL_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \ - .pull_reg = PULL_DWN_CTRL_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \ - .pu_pd_reg = PU_PD_SEL_##reg, \ - .pu_pd_val = status, - -#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ - .mux_reg = OMAP7XX_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ - .pull_reg = OMAP7XX_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#else - -#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ - .pu_pd_val = status, - -#define MUX_REG_7XX(reg, mode_offset, mode) \ - .mux_reg = OMAP7XX_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#endif /* CONFIG_OMAP_MUX_DEBUG */ - -#define MUX_CFG(desc, mux_reg, mode_offset, mode, \ - pull_reg, pull_bit, pull_status, \ - pu_pd_reg, pu_pd_status, debug_status) \ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG(mux_reg, mode_offset, mode) \ - PULL_REG(pull_reg, pull_bit, pull_status) \ - PU_PD_REG(pu_pd_reg, pu_pd_status) \ -}, - - -/* - * OMAP730/850 has a slightly different config for the pin mux. - * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and - * not the FUNC_MUX_CTRL_x regs from hardware.h - * - for pull-up/down, only has one enable bit which is is in the same register - * as mux config - */ -#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \ - pull_bit, pull_status, debug_status)\ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG_7XX(mux_reg, mode_offset, mode) \ - PULL_REG_7XX(mux_reg, pull_bit, pull_status) \ - PU_PD_REG(NA, 0) \ -}, - -#define MUX_CFG_24XX(desc, reg_offset, mode, \ - pull_en, pull_mode, dbg) \ -{ \ - .name = desc, \ - .debug = dbg, \ - .mux_reg = reg_offset, \ - .mask = mode, \ - .pull_val = pull_en, \ - .pu_pd_val = pull_mode, \ -}, - -/* 24xx/34xx mux bit defines */ -#define OMAP2_PULL_ENA (1 << 3) -#define OMAP2_PULL_UP (1 << 4) -#define OMAP2_ALTELECTRICALSEL (1 << 5) - -/* 34xx specific mux bit defines */ -#define OMAP3_INPUT_EN (1 << 8) -#define OMAP3_OFF_EN (1 << 9) -#define OMAP3_OFFOUT_EN (1 << 10) -#define OMAP3_OFFOUT_VAL (1 << 11) -#define OMAP3_OFF_PULL_EN (1 << 12) -#define OMAP3_OFF_PULL_UP (1 << 13) -#define OMAP3_WAKEUP_EN (1 << 14) - -/* 34xx mux mode options for each pin. See TRM for options */ -#define OMAP34XX_MUX_MODE0 0 -#define OMAP34XX_MUX_MODE1 1 -#define OMAP34XX_MUX_MODE2 2 -#define OMAP34XX_MUX_MODE3 3 -#define OMAP34XX_MUX_MODE4 4 -#define OMAP34XX_MUX_MODE5 5 -#define OMAP34XX_MUX_MODE6 6 -#define OMAP34XX_MUX_MODE7 7 - -/* 34xx active pin states */ -#define OMAP34XX_PIN_OUTPUT 0 -#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN -#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \ - | OMAP2_PULL_UP) -#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN) - -/* 34xx off mode states */ -#define OMAP34XX_PIN_OFF_NONE 0 -#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \ - | OMAP3_OFFOUT_VAL) -#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN) -#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \ - | OMAP3_OFF_PULL_UP) -#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN) -#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN - -#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \ - .name = desc, \ - .debug = 0, \ - .mux_reg = reg_offset, \ - .mux_val = mux_value \ -}, - -struct pin_config { - char *name; - const unsigned int mux_reg; - unsigned char debug; - -#if defined(CONFIG_ARCH_OMAP34XX) - u16 mux_val; /* Wake-up, off mode, pull, mux mode */ -#endif - -#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX) - const unsigned char mask_offset; - const unsigned char mask; - - const char *pull_name; - const unsigned int pull_reg; - const unsigned char pull_val; - const unsigned char pull_bit; - - const char *pu_pd_name; - const unsigned int pu_pd_reg; - const unsigned char pu_pd_val; -#endif - -#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) - const char *mux_reg_name; -#endif - -}; - -enum omap7xx_index { - /* OMAP 730 keyboard */ - E2_7XX_KBR0, - J7_7XX_KBR1, - E1_7XX_KBR2, - F3_7XX_KBR3, - D2_7XX_KBR4, - C2_7XX_KBC0, - D3_7XX_KBC1, - E4_7XX_KBC2, - F4_7XX_KBC3, - E3_7XX_KBC4, - - /* USB */ - AA17_7XX_USB_DM, - W16_7XX_USB_PU_EN, - W17_7XX_USB_VBUSI, -}; - -enum omap1xxx_index { - /* UART1 (BT_UART_GATING)*/ - UART1_TX = 0, - UART1_RTS, - - /* UART2 (COM_UART_GATING)*/ - UART2_TX, - UART2_RX, - UART2_CTS, - UART2_RTS, - - /* UART3 (GIGA_UART_GATING) */ - UART3_TX, - UART3_RX, - UART3_CTS, - UART3_RTS, - UART3_CLKREQ, - UART3_BCLK, /* 12MHz clock out */ - Y15_1610_UART3_RTS, - - /* PWT & PWL */ - PWT, - PWL, - - /* USB master generic */ - R18_USB_VBUS, - R18_1510_USB_GPIO0, - W4_USB_PUEN, - W4_USB_CLKO, - W4_USB_HIGHZ, - W4_GPIO58, - - /* USB1 master */ - USB1_SUSP, - USB1_SEO, - W13_1610_USB1_SE0, - USB1_TXEN, - USB1_TXD, - USB1_VP, - USB1_VM, - USB1_RCV, - USB1_SPEED, - R13_1610_USB1_SPEED, - R13_1710_USB1_SE0, - - /* USB2 master */ - USB2_SUSP, - USB2_VP, - USB2_TXEN, - USB2_VM, - USB2_RCV, - USB2_SEO, - USB2_TXD, - - /* OMAP-1510 GPIO */ - R18_1510_GPIO0, - R19_1510_GPIO1, - M14_1510_GPIO2, - - /* OMAP1610 GPIO */ - P18_1610_GPIO3, - Y15_1610_GPIO17, - - /* OMAP-1710 GPIO */ - R18_1710_GPIO0, - V2_1710_GPIO10, - N21_1710_GPIO14, - W15_1710_GPIO40, - - /* MPUIO */ - MPUIO2, - N15_1610_MPUIO2, - MPUIO4, - MPUIO5, - T20_1610_MPUIO5, - W11_1610_MPUIO6, - V10_1610_MPUIO7, - W11_1610_MPUIO9, - V10_1610_MPUIO10, - W10_1610_MPUIO11, - E20_1610_MPUIO13, - U20_1610_MPUIO14, - E19_1610_MPUIO15, - - /* MCBSP2 */ - MCBSP2_CLKR, - MCBSP2_CLKX, - MCBSP2_DR, - MCBSP2_DX, - MCBSP2_FSR, - MCBSP2_FSX, - - /* MCBSP3 */ - MCBSP3_CLKX, - - /* Misc ballouts */ - BALLOUT_V8_ARMIO3, - N20_HDQ, - - /* OMAP-1610 MMC2 */ - W8_1610_MMC2_DAT0, - V8_1610_MMC2_DAT1, - W15_1610_MMC2_DAT2, - R10_1610_MMC2_DAT3, - Y10_1610_MMC2_CLK, - Y8_1610_MMC2_CMD, - V9_1610_MMC2_CMDDIR, - V5_1610_MMC2_DATDIR0, - W19_1610_MMC2_DATDIR1, - R18_1610_MMC2_CLKIN, - - /* OMAP-1610 External Trace Interface */ - M19_1610_ETM_PSTAT0, - L15_1610_ETM_PSTAT1, - L18_1610_ETM_PSTAT2, - L19_1610_ETM_D0, - J19_1610_ETM_D6, - J18_1610_ETM_D7, - - /* OMAP16XX GPIO */ - P20_1610_GPIO4, - V9_1610_GPIO7, - W8_1610_GPIO9, - N20_1610_GPIO11, - N19_1610_GPIO13, - P10_1610_GPIO22, - V5_1610_GPIO24, - AA20_1610_GPIO_41, - W19_1610_GPIO48, - M7_1610_GPIO62, - V14_16XX_GPIO37, - R9_16XX_GPIO18, - L14_16XX_GPIO49, - - /* OMAP-1610 uWire */ - V19_1610_UWIRE_SCLK, - U18_1610_UWIRE_SDI, - W21_1610_UWIRE_SDO, - N14_1610_UWIRE_CS0, - P15_1610_UWIRE_CS3, - N15_1610_UWIRE_CS1, - - /* OMAP-1610 SPI */ - U19_1610_SPIF_SCK, - U18_1610_SPIF_DIN, - P20_1610_SPIF_DIN, - W21_1610_SPIF_DOUT, - R18_1610_SPIF_DOUT, - N14_1610_SPIF_CS0, - N15_1610_SPIF_CS1, - T19_1610_SPIF_CS2, - P15_1610_SPIF_CS3, - - /* OMAP-1610 Flash */ - L3_1610_FLASH_CS2B_OE, - M8_1610_FLASH_CS2B_WE, - - /* First MMC */ - MMC_CMD, - MMC_DAT1, - MMC_DAT2, - MMC_DAT0, - MMC_CLK, - MMC_DAT3, - - /* OMAP-1710 MMC CMDDIR and DATDIR0 */ - M15_1710_MMC_CLKI, - P19_1710_MMC_CMDDIR, - P20_1710_MMC_DATDIR0, - - /* OMAP-1610 USB0 alternate pin configuration */ - W9_USB0_TXEN, - AA9_USB0_VP, - Y5_USB0_RCV, - R9_USB0_VM, - V6_USB0_TXD, - W5_USB0_SE0, - V9_USB0_SPEED, - V9_USB0_SUSP, - - /* USB2 */ - W9_USB2_TXEN, - AA9_USB2_VP, - Y5_USB2_RCV, - R9_USB2_VM, - V6_USB2_TXD, - W5_USB2_SE0, - - /* 16XX UART */ - R13_1610_UART1_TX, - V14_16XX_UART1_RX, - R14_1610_UART1_CTS, - AA15_1610_UART1_RTS, - R9_16XX_UART2_RX, - L14_16XX_UART3_RX, - - /* I2C OMAP-1610 */ - I2C_SCL, - I2C_SDA, - - /* Keypad */ - F18_1610_KBC0, - D20_1610_KBC1, - D19_1610_KBC2, - E18_1610_KBC3, - C21_1610_KBC4, - G18_1610_KBR0, - F19_1610_KBR1, - H14_1610_KBR2, - E20_1610_KBR3, - E19_1610_KBR4, - N19_1610_KBR5, - - /* Power management */ - T20_1610_LOW_PWR, - - /* MCLK Settings */ - V5_1710_MCLK_ON, - V5_1710_MCLK_OFF, - R10_1610_MCLK_ON, - R10_1610_MCLK_OFF, - - /* CompactFlash controller */ - P11_1610_CF_CD2, - R11_1610_CF_IOIS16, - V10_1610_CF_IREQ, - W10_1610_CF_RESET, - W11_1610_CF_CD1, - - /* parallel camera */ - J15_1610_CAM_LCLK, - J18_1610_CAM_D7, - J19_1610_CAM_D6, - J14_1610_CAM_D5, - K18_1610_CAM_D4, - K19_1610_CAM_D3, - K15_1610_CAM_D2, - K14_1610_CAM_D1, - L19_1610_CAM_D0, - L18_1610_CAM_VS, - L15_1610_CAM_HS, - M19_1610_CAM_RSTZ, - Y15_1610_CAM_OUTCLK, - - /* serial camera */ - H19_1610_CAM_EXCLK, - Y12_1610_CCP_CLKP, - W13_1610_CCP_CLKM, - W14_1610_CCP_DATAP, - Y14_1610_CCP_DATAM, - -}; - -enum omap24xx_index { - /* 24xx I2C */ - M19_24XX_I2C1_SCL, - L15_24XX_I2C1_SDA, - J15_24XX_I2C2_SCL, - H19_24XX_I2C2_SDA, - - /* 24xx Menelaus interrupt */ - W19_24XX_SYS_NIRQ, - - /* 24xx clock */ - W14_24XX_SYS_CLKOUT, - - /* 24xx GPMC chipselects, wait pin monitoring */ - E2_GPMC_NCS2, - L2_GPMC_NCS7, - L3_GPMC_WAIT0, - N7_GPMC_WAIT1, - M1_GPMC_WAIT2, - P1_GPMC_WAIT3, - - /* 242X McBSP */ - Y15_24XX_MCBSP2_CLKX, - R14_24XX_MCBSP2_FSX, - W15_24XX_MCBSP2_DR, - V15_24XX_MCBSP2_DX, - - /* 24xx GPIO */ - M21_242X_GPIO11, - P21_242X_GPIO12, - AA10_242X_GPIO13, - AA6_242X_GPIO14, - AA4_242X_GPIO15, - Y11_242X_GPIO16, - AA12_242X_GPIO17, - AA8_242X_GPIO58, - Y20_24XX_GPIO60, - W4__24XX_GPIO74, - N15_24XX_GPIO85, - M15_24XX_GPIO92, - P20_24XX_GPIO93, - P18_24XX_GPIO95, - M18_24XX_GPIO96, - L14_24XX_GPIO97, - J15_24XX_GPIO99, - V14_24XX_GPIO117, - P14_24XX_GPIO125, - - /* 242x DBG GPIO */ - V4_242X_GPIO49, - W2_242X_GPIO50, - U4_242X_GPIO51, - V3_242X_GPIO52, - V2_242X_GPIO53, - V6_242X_GPIO53, - T4_242X_GPIO54, - Y4_242X_GPIO54, - T3_242X_GPIO55, - U2_242X_GPIO56, - - /* 24xx external DMA requests */ - AA10_242X_DMAREQ0, - AA6_242X_DMAREQ1, - E4_242X_DMAREQ2, - G4_242X_DMAREQ3, - D3_242X_DMAREQ4, - E3_242X_DMAREQ5, - - /* UART3 */ - K15_24XX_UART3_TX, - K14_24XX_UART3_RX, - - /* MMC/SDIO */ - G19_24XX_MMC_CLKO, - H18_24XX_MMC_CMD, - F20_24XX_MMC_DAT0, - H14_24XX_MMC_DAT1, - E19_24XX_MMC_DAT2, - D19_24XX_MMC_DAT3, - F19_24XX_MMC_DAT_DIR0, - E20_24XX_MMC_DAT_DIR1, - F18_24XX_MMC_DAT_DIR2, - E18_24XX_MMC_DAT_DIR3, - G18_24XX_MMC_CMD_DIR, - H15_24XX_MMC_CLKI, - - /* Full speed USB */ - J20_24XX_USB0_PUEN, - J19_24XX_USB0_VP, - K20_24XX_USB0_VM, - J18_24XX_USB0_RCV, - K19_24XX_USB0_TXEN, - J14_24XX_USB0_SE0, - K18_24XX_USB0_DAT, - - N14_24XX_USB1_SE0, - W12_24XX_USB1_SE0, - P15_24XX_USB1_DAT, - R13_24XX_USB1_DAT, - W20_24XX_USB1_TXEN, - P13_24XX_USB1_TXEN, - V19_24XX_USB1_RCV, - V12_24XX_USB1_RCV, - - AA10_24XX_USB2_SE0, - Y11_24XX_USB2_DAT, - AA12_24XX_USB2_TXEN, - AA6_24XX_USB2_RCV, - AA4_24XX_USB2_TLLSE0, - - /* Keypad GPIO*/ - T19_24XX_KBR0, - R19_24XX_KBR1, - V18_24XX_KBR2, - M21_24XX_KBR3, - E5__24XX_KBR4, - M18_24XX_KBR5, - R20_24XX_KBC0, - M14_24XX_KBC1, - H19_24XX_KBC2, - V17_24XX_KBC3, - P21_24XX_KBC4, - L14_24XX_KBC5, - N19_24XX_KBC6, - - /* 24xx Menelaus Keypad GPIO */ - B3__24XX_KBR5, - AA4_24XX_KBC2, - B13_24XX_KBC6, - - /* 2430 USB */ - AD9_2430_USB0_PUEN, - Y11_2430_USB0_VP, - AD7_2430_USB0_VM, - AE7_2430_USB0_RCV, - AD4_2430_USB0_TXEN, - AF9_2430_USB0_SE0, - AE6_2430_USB0_DAT, - AD24_2430_USB1_SE0, - AB24_2430_USB1_RCV, - Y25_2430_USB1_TXEN, - AA26_2430_USB1_DAT, - - /* 2430 HS-USB */ - AD9_2430_USB0HS_DATA3, - Y11_2430_USB0HS_DATA4, - AD7_2430_USB0HS_DATA5, - AE7_2430_USB0HS_DATA6, - AD4_2430_USB0HS_DATA2, - AF9_2430_USB0HS_DATA0, - AE6_2430_USB0HS_DATA1, - AE8_2430_USB0HS_CLK, - AD8_2430_USB0HS_DIR, - AE5_2430_USB0HS_STP, - AE9_2430_USB0HS_NXT, - AC7_2430_USB0HS_DATA7, - - /* 2430 McBSP */ - AD6_2430_MCBSP_CLKS, - - AB2_2430_MCBSP1_CLKR, - AD5_2430_MCBSP1_FSR, - AA1_2430_MCBSP1_DX, - AF3_2430_MCBSP1_DR, - AB3_2430_MCBSP1_FSX, - Y9_2430_MCBSP1_CLKX, - - AC10_2430_MCBSP2_FSX, - AD16_2430_MCBSP2_CLX, - AE13_2430_MCBSP2_DX, - AD13_2430_MCBSP2_DR, - AC10_2430_MCBSP2_FSX_OFF, - AD16_2430_MCBSP2_CLX_OFF, - AE13_2430_MCBSP2_DX_OFF, - AD13_2430_MCBSP2_DR_OFF, - - AC9_2430_MCBSP3_CLKX, - AE4_2430_MCBSP3_FSX, - AE2_2430_MCBSP3_DR, - AF4_2430_MCBSP3_DX, - - N3_2430_MCBSP4_CLKX, - AD23_2430_MCBSP4_DR, - AB25_2430_MCBSP4_DX, - AC25_2430_MCBSP4_FSX, - - AE16_2430_MCBSP5_CLKX, - AF12_2430_MCBSP5_FSX, - K7_2430_MCBSP5_DX, - M1_2430_MCBSP5_DR, - - /* 2430 McSPI*/ - Y18_2430_MCSPI1_CLK, - AD15_2430_MCSPI1_SIMO, - AE17_2430_MCSPI1_SOMI, - U1_2430_MCSPI1_CS0, - - /* Touchscreen GPIO */ - AF19_2430_GPIO_85, - -}; - -enum omap34xx_index { - /* 34xx I2C */ - K21_34XX_I2C1_SCL, - J21_34XX_I2C1_SDA, - AF15_34XX_I2C2_SCL, - AE15_34XX_I2C2_SDA, - AF14_34XX_I2C3_SCL, - AG14_34XX_I2C3_SDA, - AD26_34XX_I2C4_SCL, - AE26_34XX_I2C4_SDA, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ - Y8_3430_USB1HS_PHY_CLK, - Y9_3430_USB1HS_PHY_STP, - AA14_3430_USB1HS_PHY_DIR, - AA11_3430_USB1HS_PHY_NXT, - W13_3430_USB1HS_PHY_DATA0, - W12_3430_USB1HS_PHY_DATA1, - W11_3430_USB1HS_PHY_DATA2, - Y11_3430_USB1HS_PHY_DATA3, - W9_3430_USB1HS_PHY_DATA4, - Y12_3430_USB1HS_PHY_DATA5, - W8_3430_USB1HS_PHY_DATA6, - Y13_3430_USB1HS_PHY_DATA7, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ - AA8_3430_USB2HS_PHY_CLK, - AA10_3430_USB2HS_PHY_STP, - AA9_3430_USB2HS_PHY_DIR, - AB11_3430_USB2HS_PHY_NXT, - AB10_3430_USB2HS_PHY_DATA0, - AB9_3430_USB2HS_PHY_DATA1, - W3_3430_USB2HS_PHY_DATA2, - T4_3430_USB2HS_PHY_DATA3, - T3_3430_USB2HS_PHY_DATA4, - R3_3430_USB2HS_PHY_DATA5, - R4_3430_USB2HS_PHY_DATA6, - T2_3430_USB2HS_PHY_DATA7, - - - /* TLL - HSUSB: 12-pin TLL Port 1*/ - Y8_3430_USB1HS_TLL_CLK, - Y9_3430_USB1HS_TLL_STP, - AA14_3430_USB1HS_TLL_DIR, - AA11_3430_USB1HS_TLL_NXT, - W13_3430_USB1HS_TLL_DATA0, - W12_3430_USB1HS_TLL_DATA1, - W11_3430_USB1HS_TLL_DATA2, - Y11_3430_USB1HS_TLL_DATA3, - W9_3430_USB1HS_TLL_DATA4, - Y12_3430_USB1HS_TLL_DATA5, - W8_3430_USB1HS_TLL_DATA6, - Y13_3430_USB1HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 2*/ - AA8_3430_USB2HS_TLL_CLK, - AA10_3430_USB2HS_TLL_STP, - AA9_3430_USB2HS_TLL_DIR, - AB11_3430_USB2HS_TLL_NXT, - AB10_3430_USB2HS_TLL_DATA0, - AB9_3430_USB2HS_TLL_DATA1, - W3_3430_USB2HS_TLL_DATA2, - T4_3430_USB2HS_TLL_DATA3, - T3_3430_USB2HS_TLL_DATA4, - R3_3430_USB2HS_TLL_DATA5, - R4_3430_USB2HS_TLL_DATA6, - T2_3430_USB2HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 3*/ - AA6_3430_USB3HS_TLL_CLK, - AB3_3430_USB3HS_TLL_STP, - AA3_3430_USB3HS_TLL_DIR, - Y3_3430_USB3HS_TLL_NXT, - AA5_3430_USB3HS_TLL_DATA0, - Y4_3430_USB3HS_TLL_DATA1, - Y5_3430_USB3HS_TLL_DATA2, - W5_3430_USB3HS_TLL_DATA3, - AB12_3430_USB3HS_TLL_DATA4, - AB13_3430_USB3HS_TLL_DATA5, - AA13_3430_USB3HS_TLL_DATA6, - AA12_3430_USB3HS_TLL_DATA7, - - /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ - AF10_3430_USB1FS_PHY_MM1_RXDP, - AG9_3430_USB1FS_PHY_MM1_RXDM, - W13_3430_USB1FS_PHY_MM1_RXRCV, - W12_3430_USB1FS_PHY_MM1_TXSE0, - W11_3430_USB1FS_PHY_MM1_TXDAT, - Y11_3430_USB1FS_PHY_MM1_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ - AF7_3430_USB2FS_PHY_MM2_RXDP, - AH7_3430_USB2FS_PHY_MM2_RXDM, - AB10_3430_USB2FS_PHY_MM2_RXRCV, - AB9_3430_USB2FS_PHY_MM2_TXSE0, - W3_3430_USB2FS_PHY_MM2_TXDAT, - T4_3430_USB2FS_PHY_MM2_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ - AH3_3430_USB3FS_PHY_MM3_RXDP, - AE3_3430_USB3FS_PHY_MM3_RXDM, - AD1_3430_USB3FS_PHY_MM3_RXRCV, - AE1_3430_USB3FS_PHY_MM3_TXSE0, - AD2_3430_USB3FS_PHY_MM3_TXDAT, - AC1_3430_USB3FS_PHY_MM3_TXEN_N, - - /* 34xx GPIO - * - normally these are bidirectional, no internal pullup/pulldown - * - "_UP" suffix (GPIO3_UP) if internal pullup is configured - * - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown - * - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx) - */ - AF26_34XX_GPIO0, - AF22_34XX_GPIO9, - AG9_34XX_GPIO23, - AH8_34XX_GPIO29, - U8_34XX_GPIO54_OUT, - U8_34XX_GPIO54_DOWN, - L8_34XX_GPIO63, - G25_34XX_GPIO86_OUT, - AG4_34XX_GPIO134_OUT, - AF4_34XX_GPIO135_OUT, - AE4_34XX_GPIO136_OUT, - AF6_34XX_GPIO140_UP, - AE6_34XX_GPIO141, - AF5_34XX_GPIO142, - AE5_34XX_GPIO143, - H19_34XX_GPIO164_OUT, - J25_34XX_GPIO170, - - /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ - H16_34XX_SDRC_CKE0, - H17_34XX_SDRC_CKE1, - - /* MMC1 */ - N28_3430_MMC1_CLK, - M27_3430_MMC1_CMD, - N27_3430_MMC1_DAT0, - N26_3430_MMC1_DAT1, - N25_3430_MMC1_DAT2, - P28_3430_MMC1_DAT3, - P27_3430_MMC1_DAT4, - P26_3430_MMC1_DAT5, - R27_3430_MMC1_DAT6, - R25_3430_MMC1_DAT7, - - /* MMC2 */ - AE2_3430_MMC2_CLK, - AG5_3430_MMC2_CMD, - AH5_3430_MMC2_DAT0, - AH4_3430_MMC2_DAT1, - AG4_3430_MMC2_DAT2, - AF4_3430_MMC2_DAT3, - - /* MMC3 */ - AF10_3430_MMC3_CLK, - AC3_3430_MMC3_CMD, - AE11_3430_MMC3_DAT0, - AH9_3430_MMC3_DAT1, - AF13_3430_MMC3_DAT2, - AF13_3430_MMC3_DAT3, - - /* SYS_NIRQ T2 INT1 */ - AF26_34XX_SYS_NIRQ, -}; - -struct omap_mux_cfg { - struct pin_config *pins; - unsigned long size; - int (*cfg_reg)(const struct pin_config *cfg); -}; - -#ifdef CONFIG_OMAP_MUX -/* setup pin muxing in Linux */ -extern int omap1_mux_init(void); -extern int omap2_mux_init(void); -extern int omap_mux_register(struct omap_mux_cfg *); -extern int omap_cfg_reg(unsigned long reg_cfg); -#else -/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ -static inline int omap1_mux_init(void) { return 0; } -static inline int omap2_mux_init(void) { return 0; } -static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } -#endif - -#endif |