diff options
Diffstat (limited to 'arch/arm/plat-omap/include/plat/clock.h')
-rw-r--r-- | arch/arm/plat-omap/include/plat/clock.h | 28 |
1 files changed, 21 insertions, 7 deletions
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 8eb0adab19e..006e599c661 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -25,6 +25,8 @@ struct clockdomain; * @disable: fn ptr that enables the current clock in hardware * @find_idlest: function returning the IDLEST register for the clock's IP blk * @find_companion: function returning the "companion" clk reg for the clock + * @allow_idle: fn ptr that enables autoidle for the current clock in hardware + * @deny_idle: fn ptr that disables autoidle for the current clock in hardware * * A "companion" clk is an accompanying clock to the one being queried * that must be enabled for the IP module connected to the clock to @@ -42,6 +44,8 @@ struct clkops { u8 *, u8 *); void (*find_companion)(struct clk *, void __iomem **, u8 *); + void (*allow_idle)(struct clk *); + void (*deny_idle)(struct clk *); }; #ifdef CONFIG_ARCH_OMAP2PLUS @@ -53,6 +57,7 @@ struct clkops { #define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */ #define RATE_IN_36XX (1 << 4) #define RATE_IN_4430 (1 << 5) +#define RATE_IN_TI816X (1 << 6) #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) #define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) @@ -104,7 +109,6 @@ struct clksel { * @clk_ref: struct clk pointer to the clock's reference clock input * @control_reg: register containing the DPLL mode bitfield * @enable_mask: mask of the DPLL mode bitfield in @control_reg - * @rate_tolerance: maximum variance allowed from target rate (in Hz) * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() * @max_multiplier: maximum valid non-bypass multiplier value (actual) @@ -130,12 +134,9 @@ struct clksel { * XXX Some DPLLs have multiple bypass inputs, so it's not technically * correct to only have one @clk_bypass pointer. * - * XXX @rate_tolerance should probably be deprecated - currently there - * don't seem to be any usecases for DPLL rounding that is not exact. - * * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, * @last_rounded_n) should be separated from the runtime-fixed fields - * and placed into a differenct structure, so that the runtime-fixed data + * and placed into a different structure, so that the runtime-fixed data * can be placed into read-only space. */ struct dpll_data { @@ -146,7 +147,6 @@ struct dpll_data { struct clk *clk_ref; void __iomem *control_reg; u32 enable_mask; - unsigned int rate_tolerance; unsigned long last_rounded_rate; u16 last_rounded_m; u16 max_multiplier; @@ -171,12 +171,24 @@ struct dpll_data { #endif -/* struct clk.flags possibilities */ +/* + * struct clk.flags possibilities + * + * XXX document the rest of the clock flags here + * + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + */ #define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ #define CLOCK_IDLE_CONTROL (1 << 1) #define CLOCK_NO_IDLE_PARENT (1 << 2) #define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ #define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) /** * struct clk - OMAP struct clk @@ -292,6 +304,8 @@ extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); #endif extern struct clk *omap_clk_get_by_name(const char *name); +extern int omap_clk_enable_autoidle_all(void); +extern int omap_clk_disable_autoidle_all(void); extern const struct clkops clkops_null; |