summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-omap
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-omap')
-rw-r--r--arch/arm/plat-omap/Kconfig1
-rw-r--r--arch/arm/plat-omap/common.c50
-rw-r--r--arch/arm/plat-omap/devices.c6
-rw-r--r--arch/arm/plat-omap/dmtimer.c2
-rw-r--r--arch/arm/plat-omap/gpio.c612
-rw-r--r--arch/arm/plat-omap/mcbsp.c15
-rw-r--r--arch/arm/plat-omap/timer32k.c139
7 files changed, 651 insertions, 174 deletions
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index f2dc363de66..9e8d21eca4e 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -11,6 +11,7 @@ choice
config ARCH_OMAP1
bool "TI OMAP1"
+ select GENERIC_CLOCKEVENTS
config ARCH_OMAP2
bool "TI OMAP2"
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 57b7b93674a..fecd3d62599 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -156,3 +156,53 @@ static int __init omap_add_serial_console(void)
return add_preferred_console("ttyS", line, opt);
}
console_initcall(omap_add_serial_console);
+
+
+/*
+ * 32KHz clocksource ... always available, on pretty most chips except
+ * OMAP 730 and 1510. Other timers could be used as clocksources, with
+ * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
+ * but systems won't necessarily want to spend resources that way.
+ */
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+#define TIMER_32K_SYNCHRONIZED 0xfffbc410
+#elif defined(CONFIG_ARCH_OMAP24XX)
+#define TIMER_32K_SYNCHRONIZED 0x48004010
+#endif
+
+#ifdef TIMER_32K_SYNCHRONIZED
+
+#include <linux/clocksource.h>
+
+static cycle_t omap_32k_read(void)
+{
+ return omap_readl(TIMER_32K_SYNCHRONIZED);
+}
+
+static struct clocksource clocksource_32k = {
+ .name = "32k_counter",
+ .rating = 250,
+ .read = omap_32k_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 10,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init omap_init_clocksource_32k(void)
+{
+ static char err[] __initdata = KERN_ERR
+ "%s: can't register clocksource!\n";
+
+ if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
+ clocksource_32k.mult = clocksource_hz2mult(32768,
+ clocksource_32k.shift);
+
+ if (clocksource_register(&clocksource_32k))
+ printk(err, clocksource_32k.name);
+ }
+ return 0;
+}
+arch_initcall(omap_init_clocksource_32k);
+
+#endif /* TIMER_32K_SYNCHRONIZED */
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index dbc3f44e07a..eeb33fed6f7 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -429,6 +429,10 @@ static inline void omap_init_rng(void) {}
*/
static int __init omap_init_devices(void)
{
+/*
+ * Need to enable relevant once for 2430 SDP
+ */
+#ifndef CONFIG_MACH_OMAP_2430SDP
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
@@ -438,7 +442,7 @@ static int __init omap_init_devices(void)
omap_init_uwire();
omap_init_wdt();
omap_init_rng();
-
+#endif
return 0;
}
arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 45f0439bffb..659619f235c 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -506,6 +506,8 @@ int omap_dm_timer_init(void)
BUG_ON(dm_source_clocks[i] == NULL);
}
#endif
+ if (cpu_is_omap243x())
+ dm_timers[0].phys_base = 0x49018000;
for (i = 0; i < dm_timer_count; i++) {
#ifdef CONFIG_ARCH_OMAP2
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 8bedc8f9b6e..9dc6d3617bd 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -85,10 +85,17 @@
/*
* omap24xx specific GPIO registers
*/
-#define OMAP24XX_GPIO1_BASE (void __iomem *)0x48018000
-#define OMAP24XX_GPIO2_BASE (void __iomem *)0x4801a000
-#define OMAP24XX_GPIO3_BASE (void __iomem *)0x4801c000
-#define OMAP24XX_GPIO4_BASE (void __iomem *)0x4801e000
+#define OMAP242X_GPIO1_BASE (void __iomem *)0x48018000
+#define OMAP242X_GPIO2_BASE (void __iomem *)0x4801a000
+#define OMAP242X_GPIO3_BASE (void __iomem *)0x4801c000
+#define OMAP242X_GPIO4_BASE (void __iomem *)0x4801e000
+
+#define OMAP243X_GPIO1_BASE (void __iomem *)0x4900C000
+#define OMAP243X_GPIO2_BASE (void __iomem *)0x4900E000
+#define OMAP243X_GPIO3_BASE (void __iomem *)0x49010000
+#define OMAP243X_GPIO4_BASE (void __iomem *)0x49012000
+#define OMAP243X_GPIO5_BASE (void __iomem *)0x480B6000
+
#define OMAP24XX_GPIO_REVISION 0x0000
#define OMAP24XX_GPIO_SYSCONFIG 0x0010
#define OMAP24XX_GPIO_SYSSTATUS 0x0014
@@ -117,8 +124,18 @@ struct gpio_bank {
u16 virtual_irq_start;
int method;
u32 reserved_map;
+#if defined (CONFIG_ARCH_OMAP16XX) || defined (CONFIG_ARCH_OMAP24XX)
u32 suspend_wakeup;
u32 saved_wakeup;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
+ u32 non_wakeup_gpios;
+ u32 enabled_non_wakeup_gpios;
+
+ u32 saved_datain;
+ u32 saved_fallingdetect;
+ u32 saved_risingdetect;
+#endif
spinlock_t lock;
};
@@ -158,12 +175,22 @@ static struct gpio_bank gpio_bank_730[7] = {
#endif
#ifdef CONFIG_ARCH_OMAP24XX
-static struct gpio_bank gpio_bank_24xx[4] = {
- { OMAP24XX_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
- { OMAP24XX_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
- { OMAP24XX_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
- { OMAP24XX_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
+
+static struct gpio_bank gpio_bank_242x[4] = {
+ { OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
+ { OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
+ { OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
+ { OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
+};
+
+static struct gpio_bank gpio_bank_243x[5] = {
+ { OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
+ { OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
+ { OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
+ { OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
+ { OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
};
+
#endif
static struct gpio_bank *gpio_bank;
@@ -257,21 +284,34 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
u32 l;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_IO_CNTL;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_DIR_CONTROL;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
reg += OMAP1610_GPIO_DIRECTION;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_DIR_CONTROL;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
+#endif
+ default:
+ WARN_ON(1);
+ return;
}
l = __raw_readl(reg);
if (is_input)
@@ -299,6 +339,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
u32 l = 0;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_OUTPUT;
l = __raw_readl(reg);
@@ -307,6 +348,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
else
l &= ~(1 << gpio);
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_DATA_OUTPUT;
l = __raw_readl(reg);
@@ -315,6 +358,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
else
l &= ~(1 << gpio);
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
if (enable)
reg += OMAP1610_GPIO_SET_DATAOUT;
@@ -322,6 +367,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
reg += OMAP1610_GPIO_CLEAR_DATAOUT;
l = 1 << gpio;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_DATA_OUTPUT;
l = __raw_readl(reg);
@@ -330,6 +377,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
else
l &= ~(1 << gpio);
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -337,8 +386,9 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
reg += OMAP24XX_GPIO_CLEARDATAOUT;
l = 1 << gpio;
break;
+#endif
default:
- BUG();
+ WARN_ON(1);
return;
}
__raw_writel(l, reg);
@@ -362,28 +412,37 @@ int omap_get_gpio_datain(int gpio)
void __iomem *reg;
if (check_gpio(gpio) < 0)
- return -1;
+ return -EINVAL;
bank = get_gpio_bank(gpio);
reg = bank->base;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_INPUT_LATCH;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_DATA_INPUT;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
reg += OMAP1610_GPIO_DATAIN;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_DATA_INPUT;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
break;
+#endif
default:
- BUG();
- return -1;
+ return -EINVAL;
}
return (__raw_readl(reg)
& (1 << get_gpio_index(gpio))) != 0;
@@ -397,8 +456,10 @@ do { \
__raw_writel(l, base + reg); \
} while(0)
-static inline void set_24xx_gpio_triggering(void __iomem *base, int gpio, int trigger)
+#ifdef CONFIG_ARCH_OMAP24XX
+static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
{
+ void __iomem *base = bank->base;
u32 gpio_bit = 1 << gpio;
MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
@@ -409,9 +470,21 @@ static inline void set_24xx_gpio_triggering(void __iomem *base, int gpio, int tr
trigger & __IRQT_RISEDGE);
MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
trigger & __IRQT_FALEDGE);
+ if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
+ if (trigger != 0)
+ __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_SETWKUENA);
+ else
+ __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_CLEARWKUENA);
+ } else {
+ if (trigger != 0)
+ bank->enabled_non_wakeup_gpios |= gpio_bit;
+ else
+ bank->enabled_non_wakeup_gpios &= ~gpio_bit;
+ }
/* FIXME: Possibly do 'set_irq_handler(j, handle_level_irq)' if only level
* triggering requested. */
}
+#endif
static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
{
@@ -419,6 +492,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
u32 l = 0;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = __raw_readl(reg);
@@ -429,6 +503,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
else
goto bad;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
l = __raw_readl(reg);
@@ -439,22 +515,28 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
else
goto bad;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
if (gpio & 0x08)
reg += OMAP1610_GPIO_EDGE_CTRL2;
else
reg += OMAP1610_GPIO_EDGE_CTRL1;
gpio &= 0x07;
- /* We allow only edge triggering, i.e. two lowest bits */
- if (trigger & (__IRQT_LOWLVL | __IRQT_HIGHLVL))
- BUG();
l = __raw_readl(reg);
l &= ~(3 << (gpio << 1));
if (trigger & __IRQT_RISEDGE)
l |= 2 << (gpio << 1);
if (trigger & __IRQT_FALEDGE)
l |= 1 << (gpio << 1);
+ if (trigger)
+ /* Enable wake-up during idle for dynamic tick */
+ __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA);
+ else
+ __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_INT_CONTROL;
l = __raw_readl(reg);
@@ -465,11 +547,13 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
else
goto bad;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
- set_24xx_gpio_triggering(reg, gpio, trigger);
+ set_24xx_gpio_triggering(bank, gpio, trigger);
break;
+#endif
default:
- BUG();
goto bad;
}
__raw_writel(l, reg);
@@ -484,7 +568,7 @@ static int gpio_irq_type(unsigned irq, unsigned type)
unsigned gpio;
int retval;
- if (irq > IH_MPUIO_BASE)
+ if (!cpu_is_omap24xx() && irq > IH_MPUIO_BASE)
gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
else
gpio = irq - IH_GPIO_BASE;
@@ -492,14 +576,21 @@ static int gpio_irq_type(unsigned irq, unsigned type)
if (check_gpio(gpio) < 0)
return -EINVAL;
- if (type & IRQT_PROBE)
+ if (type & ~IRQ_TYPE_SENSE_MASK)
return -EINVAL;
- if (!cpu_is_omap24xx() && (type & (__IRQT_LOWLVL|__IRQT_HIGHLVL)))
+
+ /* OMAP1 allows only only edge triggering */
+ if (!cpu_is_omap24xx()
+ && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
return -EINVAL;
- bank = get_gpio_bank(gpio);
+ bank = get_irq_chip_data(irq);
spin_lock(&bank->lock);
retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
+ if (retval == 0) {
+ irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
+ irq_desc[irq].status |= type;
+ }
spin_unlock(&bank->lock);
return retval;
}
@@ -509,24 +600,34 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
void __iomem *reg = bank->base;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
/* MPUIO irqstatus is reset by reading the status register,
* so do nothing here */
return;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_STATUS;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
reg += OMAP1610_GPIO_IRQSTATUS1;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_INT_STATUS;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
break;
+#endif
default:
- BUG();
+ WARN_ON(1);
return;
}
__raw_writel(gpio_mask, reg);
@@ -549,31 +650,41 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
u32 mask;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_MASKIT;
mask = 0xffff;
inv = 1;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_MASK;
mask = 0xffff;
inv = 1;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
reg += OMAP1610_GPIO_IRQENABLE1;
mask = 0xffff;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_INT_MASK;
mask = 0xffffffff;
inv = 1;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
mask = 0xffffffff;
break;
+#endif
default:
- BUG();
+ WARN_ON(1);
return 0;
}
@@ -590,6 +701,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
u32 l;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_MASKIT;
l = __raw_readl(reg);
@@ -598,6 +710,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
else
l |= gpio_mask;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_MASK;
l = __raw_readl(reg);
@@ -606,6 +720,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
else
l |= gpio_mask;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
if (enable)
reg += OMAP1610_GPIO_SET_IRQENABLE1;
@@ -613,6 +729,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
l = gpio_mask;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_INT_MASK;
l = __raw_readl(reg);
@@ -621,6 +739,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
else
l |= gpio_mask;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -628,8 +748,9 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
l = gpio_mask;
break;
+#endif
default:
- BUG();
+ WARN_ON(1);
return;
}
__raw_writel(l, reg);
@@ -651,15 +772,39 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena
static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
{
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
+ case METHOD_MPUIO:
case METHOD_GPIO_1610:
+ spin_lock(&bank->lock);
+ if (enable) {
+ bank->suspend_wakeup |= (1 << gpio);
+ enable_irq_wake(bank->irq);
+ } else {
+ disable_irq_wake(bank->irq);
+ bank->suspend_wakeup &= ~(1 << gpio);
+ }
+ spin_unlock(&bank->lock);
+ return 0;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
+ if (bank->non_wakeup_gpios & (1 << gpio)) {
+ printk(KERN_ERR "Unable to modify wakeup on "
+ "non-wakeup GPIO%d\n",
+ (bank - gpio_bank) * 32 + gpio);
+ return -EINVAL;
+ }
spin_lock(&bank->lock);
- if (enable)
+ if (enable) {
bank->suspend_wakeup |= (1 << gpio);
- else
+ enable_irq_wake(bank->irq);
+ } else {
+ disable_irq_wake(bank->irq);
bank->suspend_wakeup &= ~(1 << gpio);
+ }
spin_unlock(&bank->lock);
return 0;
+#endif
default:
printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n",
bank->method);
@@ -684,7 +829,7 @@ static int gpio_wake_enable(unsigned int irq, unsigned int enable)
if (check_gpio(gpio) < 0)
return -ENODEV;
- bank = get_gpio_bank(gpio);
+ bank = get_irq_chip_data(irq);
retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
return retval;
@@ -721,20 +866,6 @@ int omap_request_gpio(int gpio)
__raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg);
}
#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- if (bank->method == METHOD_GPIO_1610) {
- /* Enable wake-up during idle for dynamic tick */
- void __iomem *reg = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
- __raw_writel(1 << get_gpio_index(gpio), reg);
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP24XX
- if (bank->method == METHOD_GPIO_24XX) {
- /* Enable wake-up during idle for dynamic tick */
- void __iomem *reg = bank->base + OMAP24XX_GPIO_SETWKUENA;
- __raw_writel(1 << get_gpio_index(gpio), reg);
- }
-#endif
spin_unlock(&bank->lock);
return 0;
@@ -794,8 +925,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
desc->chip->ack(irq);
bank = get_irq_data(irq);
+#ifdef CONFIG_ARCH_OMAP1
if (bank->method == METHOD_MPUIO)
isr_reg = bank->base + OMAP_MPUIO_GPIO_INT;
+#endif
#ifdef CONFIG_ARCH_OMAP15XX
if (bank->method == METHOD_GPIO_1510)
isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
@@ -911,7 +1044,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
static void gpio_irq_shutdown(unsigned int irq)
{
unsigned int gpio = irq - IH_GPIO_BASE;
- struct gpio_bank *bank = get_gpio_bank(gpio);
+ struct gpio_bank *bank = get_irq_chip_data(irq);
_reset_gpio(bank, gpio);
}
@@ -919,7 +1052,7 @@ static void gpio_irq_shutdown(unsigned int irq)
static void gpio_ack_irq(unsigned int irq)
{
unsigned int gpio = irq - IH_GPIO_BASE;
- struct gpio_bank *bank = get_gpio_bank(gpio);
+ struct gpio_bank *bank = get_irq_chip_data(irq);
_clear_gpio_irqstatus(bank, gpio);
}
@@ -927,7 +1060,7 @@ static void gpio_ack_irq(unsigned int irq)
static void gpio_mask_irq(unsigned int irq)
{
unsigned int gpio = irq - IH_GPIO_BASE;
- struct gpio_bank *bank = get_gpio_bank(gpio);
+ struct gpio_bank *bank = get_irq_chip_data(irq);
_set_gpio_irqenable(bank, gpio, 0);
}
@@ -936,11 +1069,27 @@ static void gpio_unmask_irq(unsigned int irq)
{
unsigned int gpio = irq - IH_GPIO_BASE;
unsigned int gpio_idx = get_gpio_index(gpio);
- struct gpio_bank *bank = get_gpio_bank(gpio);
+ struct gpio_bank *bank = get_irq_chip_data(irq);
_set_gpio_irqenable(bank, gpio_idx, 1);
}
+static struct irq_chip gpio_irq_chip = {
+ .name = "GPIO",
+ .shutdown = gpio_irq_shutdown,
+ .ack = gpio_ack_irq,
+ .mask = gpio_mask_irq,
+ .unmask = gpio_unmask_irq,
+ .set_type = gpio_irq_type,
+ .set_wake = gpio_wake_enable,
+};
+
+/*---------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_OMAP1
+
+/* MPUIO uses the always-on 32k clock */
+
static void mpuio_ack_irq(unsigned int irq)
{
/* The ISR is reset automatically, so do nothing here. */
@@ -949,7 +1098,7 @@ static void mpuio_ack_irq(unsigned int irq)
static void mpuio_mask_irq(unsigned int irq)
{
unsigned int gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
- struct gpio_bank *bank = get_gpio_bank(gpio);
+ struct gpio_bank *bank = get_irq_chip_data(irq);
_set_gpio_irqenable(bank, gpio, 0);
}
@@ -957,33 +1106,108 @@ static void mpuio_mask_irq(unsigned int irq)
static void mpuio_unmask_irq(unsigned int irq)
{
unsigned int gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
- struct gpio_bank *bank = get_gpio_bank(gpio);
+ struct gpio_bank *bank = get_irq_chip_data(irq);
_set_gpio_irqenable(bank, gpio, 1);
}
-static struct irq_chip gpio_irq_chip = {
- .name = "GPIO",
- .shutdown = gpio_irq_shutdown,
- .ack = gpio_ack_irq,
- .mask = gpio_mask_irq,
- .unmask = gpio_unmask_irq,
+static struct irq_chip mpuio_irq_chip = {
+ .name = "MPUIO",
+ .ack = mpuio_ack_irq,
+ .mask = mpuio_mask_irq,
+ .unmask = mpuio_unmask_irq,
.set_type = gpio_irq_type,
+#ifdef CONFIG_ARCH_OMAP16XX
+ /* REVISIT: assuming only 16xx supports MPUIO wake events */
.set_wake = gpio_wake_enable,
+#endif
};
-static struct irq_chip mpuio_irq_chip = {
- .name = "MPUIO",
- .ack = mpuio_ack_irq,
- .mask = mpuio_mask_irq,
- .unmask = mpuio_unmask_irq,
- .set_type = gpio_irq_type,
+
+#define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO)
+
+
+#ifdef CONFIG_ARCH_OMAP16XX
+
+#include <linux/platform_device.h>
+
+static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t mesg)
+{
+ struct gpio_bank *bank = platform_get_drvdata(pdev);
+ void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
+
+ spin_lock(&bank->lock);
+ bank->saved_wakeup = __raw_readl(mask_reg);
+ __raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg);
+ spin_unlock(&bank->lock);
+
+ return 0;
+}
+
+static int omap_mpuio_resume_early(struct platform_device *pdev)
+{
+ struct gpio_bank *bank = platform_get_drvdata(pdev);
+ void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
+
+ spin_lock(&bank->lock);
+ __raw_writel(bank->saved_wakeup, mask_reg);
+ spin_unlock(&bank->lock);
+
+ return 0;
+}
+
+/* use platform_driver for this, now that there's no longer any
+ * point to sys_device (other than not disturbing old code).
+ */
+static struct platform_driver omap_mpuio_driver = {
+ .suspend_late = omap_mpuio_suspend_late,
+ .resume_early = omap_mpuio_resume_early,
+ .driver = {
+ .name = "mpuio",
+ },
+};
+
+static struct platform_device omap_mpuio_device = {
+ .name = "mpuio",
+ .id = -1,
+ .dev = {
+ .driver = &omap_mpuio_driver.driver,
+ }
+ /* could list the /proc/iomem resources */
};
+static inline void mpuio_init(void)
+{
+ platform_set_drvdata(&omap_mpuio_device, &gpio_bank_1610[0]);
+
+ if (platform_driver_register(&omap_mpuio_driver) == 0)
+ (void) platform_device_register(&omap_mpuio_device);
+}
+
+#else
+static inline void mpuio_init(void) {}
+#endif /* 16xx */
+
+#else
+
+extern struct irq_chip mpuio_irq_chip;
+
+#define bank_is_mpuio(bank) 0
+static inline void mpuio_init(void) {}
+
+#endif
+
+/*---------------------------------------------------------------------*/
+
static int initialized;
static struct clk * gpio_ick;
static struct clk * gpio_fck;
+#ifdef CONFIG_ARCH_OMAP2430
+static struct clk * gpio5_ick;
+static struct clk * gpio5_fck;
+#endif
+
static int __init _omap_gpio_init(void)
{
int i;
@@ -1009,7 +1233,25 @@ static int __init _omap_gpio_init(void)
printk("Could not get gpios_fck\n");
else
clk_enable(gpio_fck);
- }
+
+ /*
+ * On 2430 GPIO 5 uses CORE L4 ICLK
+ */
+#ifdef CONFIG_ARCH_OMAP2430
+ if (cpu_is_omap2430()) {
+ gpio5_ick = clk_get(NULL, "gpio5_ick");
+ if (IS_ERR(gpio5_ick))
+ printk("Could not get gpio5_ick\n");
+ else
+ clk_enable(gpio5_ick);
+ gpio5_fck = clk_get(NULL, "gpio5_fck");
+ if (IS_ERR(gpio5_fck))
+ printk("Could not get gpio5_fck\n");
+ else
+ clk_enable(gpio5_fck);
+ }
+#endif
+}
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx()) {
@@ -1036,14 +1278,24 @@ static int __init _omap_gpio_init(void)
gpio_bank = gpio_bank_730;
}
#endif
+
#ifdef CONFIG_ARCH_OMAP24XX
- if (cpu_is_omap24xx()) {
+ if (cpu_is_omap242x()) {
int rev;
gpio_bank_count = 4;
- gpio_bank = gpio_bank_24xx;
+ gpio_bank = gpio_bank_242x;
+ rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+ printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n",
+ (rev >> 4) & 0x0f, rev & 0x0f);
+ }
+ if (cpu_is_omap243x()) {
+ int rev;
+
+ gpio_bank_count = 5;
+ gpio_bank = gpio_bank_243x;
rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
- printk(KERN_INFO "OMAP24xx GPIO hardware version %d.%d\n",
+ printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n",
(rev >> 4) & 0x0f, rev & 0x0f);
}
#endif
@@ -1054,9 +1306,8 @@ static int __init _omap_gpio_init(void)
bank->reserved_map = 0;
bank->base = IO_ADDRESS(bank->base);
spin_lock_init(&bank->lock);
- if (bank->method == METHOD_MPUIO) {
+ if (bank_is_mpuio(bank))
omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT);
- }
#ifdef CONFIG_ARCH_OMAP15XX
if (bank->method == METHOD_GPIO_1510) {
__raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK);
@@ -1080,15 +1331,25 @@ static int __init _omap_gpio_init(void)
#endif
#ifdef CONFIG_ARCH_OMAP24XX
if (bank->method == METHOD_GPIO_24XX) {
+ static const u32 non_wakeup_gpios[] = {
+ 0xe203ffc0, 0x08700040
+ };
+
__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
+ __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
+ /* Initialize interface clock ungated, module enabled */
+ __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
+ if (i < ARRAY_SIZE(non_wakeup_gpios))
+ bank->non_wakeup_gpios = non_wakeup_gpios[i];
gpio_count = 32;
}
#endif
for (j = bank->virtual_irq_start;
j < bank->virtual_irq_start + gpio_count; j++) {
- if (bank->method == METHOD_MPUIO)
+ set_irq_chip_data(j, bank);
+ if (bank_is_mpuio(bank))
set_irq_chip(j, &mpuio_irq_chip);
else
set_irq_chip(j, &gpio_irq_chip);
@@ -1104,6 +1365,12 @@ static int __init _omap_gpio_init(void)
if (cpu_is_omap16xx())
omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL);
+#ifdef CONFIG_ARCH_OMAP24XX
+ /* Enable autoidle for the OCP interface */
+ if (cpu_is_omap24xx())
+ omap_writel(1 << 0, 0x48019010);
+#endif
+
return 0;
}
@@ -1122,16 +1389,20 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
void __iomem *wake_set;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
+#endif
default:
continue;
}
@@ -1159,14 +1430,18 @@ static int omap_gpio_resume(struct sys_device *dev)
void __iomem *wake_set;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
+#endif
default:
continue;
}
@@ -1190,6 +1465,80 @@ static struct sys_device omap_gpio_device = {
.id = 0,
.cls = &omap_gpio_sysclass,
};
+
+#endif
+
+#ifdef CONFIG_ARCH_OMAP24XX
+
+static int workaround_enabled;
+
+void omap2_gpio_prepare_for_retention(void)
+{
+ int i, c = 0;
+
+ /* Remove triggering for all non-wakeup GPIOs. Otherwise spurious
+ * IRQs will be generated. See OMAP2420 Errata item 1.101. */
+ for (i = 0; i < gpio_bank_count; i++) {
+ struct gpio_bank *bank = &gpio_bank[i];
+ u32 l1, l2;
+
+ if (!(bank->enabled_non_wakeup_gpios))
+ continue;
+ bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+ l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+ l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
+ bank->saved_fallingdetect = l1;
+ bank->saved_risingdetect = l2;
+ l1 &= ~bank->enabled_non_wakeup_gpios;
+ l2 &= ~bank->enabled_non_wakeup_gpios;
+ __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+ __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
+ c++;
+ }
+ if (!c) {
+ workaround_enabled = 0;
+ return;
+ }
+ workaround_enabled = 1;
+}
+
+void omap2_gpio_resume_after_retention(void)
+{
+ int i;
+
+ if (!workaround_enabled)
+ return;
+ for (i = 0; i < gpio_bank_count; i++) {
+ struct gpio_bank *bank = &gpio_bank[i];
+ u32 l;
+
+ if (!(bank->enabled_non_wakeup_gpios))
+ continue;
+ __raw_writel(bank->saved_fallingdetect,
+ bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+ __raw_writel(bank->saved_risingdetect,
+ bank->base + OMAP24XX_GPIO_RISINGDETECT);
+ /* Check if any of the non-wakeup interrupt GPIOs have changed
+ * state. If so, generate an IRQ by software. This is
+ * horribly racy, but it's the best we can do to work around
+ * this silicon bug. */
+ l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+ l ^= bank->saved_datain;
+ l &= bank->non_wakeup_gpios;
+ if (l) {
+ u32 old0, old1;
+
+ old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+ old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+ __raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+ __raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+ __raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+ __raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+ }
+ }
+
+}
+
#endif
/*
@@ -1211,6 +1560,8 @@ static int __init omap_gpio_sysinit(void)
if (!initialized)
ret = _omap_gpio_init();
+ mpuio_init();
+
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX)
if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
if (ret == 0) {
@@ -1231,3 +1582,128 @@ EXPORT_SYMBOL(omap_set_gpio_dataout);
EXPORT_SYMBOL(omap_get_gpio_datain);
arch_initcall(omap_gpio_sysinit);
+
+
+#ifdef CONFIG_DEBUG_FS
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static int gpio_is_input(struct gpio_bank *bank, int mask)
+{
+ void __iomem *reg = bank->base;
+
+ switch (bank->method) {
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_IO_CNTL;
+ break;
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_DIR_CONTROL;
+ break;
+ case METHOD_GPIO_1610:
+ reg += OMAP1610_GPIO_DIRECTION;
+ break;
+ case METHOD_GPIO_730:
+ reg += OMAP730_GPIO_DIR_CONTROL;
+ break;
+ case METHOD_GPIO_24XX:
+ reg += OMAP24XX_GPIO_OE;
+ break;
+ }
+ return __raw_readl(reg) & mask;
+}
+
+
+static int dbg_gpio_show(struct seq_file *s, void *unused)
+{
+ unsigned i, j, gpio;
+
+ for (i = 0, gpio = 0; i < gpio_bank_count; i++) {
+ struct gpio_bank *bank = gpio_bank + i;
+ unsigned bankwidth = 16;
+ u32 mask = 1;
+
+ if (bank_is_mpuio(bank))
+ gpio = OMAP_MPUIO(0);
+ else if (cpu_is_omap24xx() || cpu_is_omap730())
+ bankwidth = 32;
+
+ for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
+ unsigned irq, value, is_in, irqstat;
+
+ if (!(bank->reserved_map & mask))
+ continue;
+
+ irq = bank->virtual_irq_start + j;
+ value = omap_get_gpio_datain(gpio);
+ is_in = gpio_is_input(bank, mask);
+
+ if (bank_is_mpuio(bank))
+ seq_printf(s, "MPUIO %2d: ", j);
+ else
+ seq_printf(s, "GPIO %3d: ", gpio);
+ seq_printf(s, "%s %s",
+ is_in ? "in " : "out",
+ value ? "hi" : "lo");
+
+ irqstat = irq_desc[irq].status;
+ if (is_in && ((bank->suspend_wakeup & mask)
+ || irqstat & IRQ_TYPE_SENSE_MASK)) {
+ char *trigger = NULL;
+
+ switch (irqstat & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_FALLING:
+ trigger = "falling";
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ trigger = "rising";
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ trigger = "bothedge";
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ trigger = "low";
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ trigger = "high";
+ break;
+ case IRQ_TYPE_NONE:
+ trigger = "(unspecified)";
+ break;
+ }
+ seq_printf(s, ", irq-%d %s%s",
+ irq, trigger,
+ (bank->suspend_wakeup & mask)
+ ? " wakeup" : "");
+ }
+ seq_printf(s, "\n");
+ }
+
+ if (bank_is_mpuio(bank)) {
+ seq_printf(s, "\n");
+ gpio = 0;
+ }
+ }
+ return 0;
+}
+
+static int dbg_gpio_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, dbg_gpio_show, &inode->i_private);
+}
+
+static const struct file_operations debug_fops = {
+ .open = dbg_gpio_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init omap_gpio_debuginit(void)
+{
+ (void) debugfs_create_file("omap_gpio", S_IRUGO,
+ NULL, NULL, &debug_fops);
+ return 0;
+}
+late_initcall(omap_gpio_debuginit);
+#endif
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index b8d6f17ff58..f7b9ccdaacb 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -225,11 +225,16 @@ static void omap_mcbsp_dsp_free(void)
#ifdef CONFIG_ARCH_OMAP2
static void omap2_mcbsp2_mux_setup(void)
{
- omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
- omap_cfg_reg(R14_24XX_MCBSP2_FSX);
- omap_cfg_reg(W15_24XX_MCBSP2_DR);
- omap_cfg_reg(V15_24XX_MCBSP2_DX);
- omap_cfg_reg(V14_24XX_GPIO117);
+ if (cpu_is_omap2420()) {
+ omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
+ omap_cfg_reg(R14_24XX_MCBSP2_FSX);
+ omap_cfg_reg(W15_24XX_MCBSP2_DR);
+ omap_cfg_reg(V15_24XX_MCBSP2_DX);
+ omap_cfg_reg(V14_24XX_GPIO117);
+ }
+ /*
+ * Need to add MUX settings for OMAP 2430 SDP
+ */
}
#endif
diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/plat-omap/timer32k.c
index 26531060116..114f87151d6 100644
--- a/arch/arm/plat-omap/timer32k.c
+++ b/arch/arm/plat-omap/timer32k.c
@@ -42,6 +42,8 @@
#include <linux/spinlock.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
#include <asm/system.h>
#include <asm/hardware.h>
@@ -80,13 +82,13 @@ struct sys_timer omap_timer;
#define OMAP1_32K_TIMER_TVR 0x00
#define OMAP1_32K_TIMER_TCR 0x04
-#define OMAP_32K_TICKS_PER_HZ (32768 / HZ)
+#define OMAP_32K_TICKS_PER_SEC (32768)
/*
* TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1
* so with HZ = 128, TVR = 255.
*/
-#define OMAP_32K_TIMER_TICK_PERIOD ((32768 / HZ) - 1)
+#define OMAP_32K_TIMER_TICK_PERIOD ((OMAP_32K_TICKS_PER_SEC / HZ) - 1)
#define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \
(((nr_jiffies) * (clock_rate)) / HZ)
@@ -142,6 +144,28 @@ static inline void omap_32k_timer_ack_irq(void)
#endif
+static void omap_32k_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_PERIODIC:
+ omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ omap_32k_timer_stop();
+ break;
+ }
+}
+
+static struct clock_event_device clockevent_32k_timer = {
+ .name = "32k-timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .shift = 32,
+ .set_mode = omap_32k_timer_set_mode,
+};
+
/*
* The 32KHz synchronized timer is an additional timer on 16xx.
* It is always running.
@@ -171,15 +195,6 @@ omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
static unsigned long omap_32k_last_tick = 0;
/*
- * Returns elapsed usecs since last 32k timer interrupt
- */
-static unsigned long omap_32k_timer_gettimeoffset(void)
-{
- unsigned long now = omap_32k_sync_timer_read();
- return omap_32k_ticks_to_usecs(now - omap_32k_last_tick);
-}
-
-/*
* Returns current time from boot in nsecs. It's OK for this to wrap
* around for now, as it's just a relative time stamp.
*/
@@ -188,95 +203,16 @@ unsigned long long sched_clock(void)
return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read());
}
-/*
- * Timer interrupt for 32KHz timer. When dynamic tick is enabled, this
- * function is also called from other interrupts to remove latency
- * issues with dynamic tick. In the dynamic tick case, we need to lock
- * with irqsave.
- */
-static inline irqreturn_t _omap_32k_timer_interrupt(int irq, void *dev_id)
-{
- unsigned long now;
-
- omap_32k_timer_ack_irq();
- now = omap_32k_sync_timer_read();
-
- while ((signed long)(now - omap_32k_last_tick)
- >= OMAP_32K_TICKS_PER_HZ) {
- omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
- timer_tick();
- }
-
- /* Restart timer so we don't drift off due to modulo or dynamic tick.
- * By default we program the next timer to be continuous to avoid
- * latencies during high system load. During dynamic tick operation the
- * continuous timer can be overridden from pm_idle to be longer.
- */
- omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t omap_32k_timer_handler(int irq, void *dev_id)
-{
- return _omap_32k_timer_interrupt(irq, dev_id);
-}
-
static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
{
- unsigned long flags;
+ struct clock_event_device *evt = &clockevent_32k_timer;
+ omap_32k_timer_ack_irq();
- write_seqlock_irqsave(&xtime_lock, flags);
- _omap_32k_timer_interrupt(irq, dev_id);
- write_sequnlock_irqrestore(&xtime_lock, flags);
+ evt->event_handler(evt);
return IRQ_HANDLED;
}
-#ifdef CONFIG_NO_IDLE_HZ
-/*
- * Programs the next timer interrupt needed. Called when dynamic tick is
- * enabled, and to reprogram the ticks to skip from pm_idle. Note that
- * we can keep the timer continuous, and don't need to set it to run in
- * one-shot mode. This is because the timer will get reprogrammed again
- * after next interrupt.
- */
-void omap_32k_timer_reprogram(unsigned long next_tick)
-{
- unsigned long ticks = JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1;
- unsigned long now = omap_32k_sync_timer_read();
- unsigned long idled = now - omap_32k_last_tick;
-
- if (idled + 1 < ticks)
- ticks -= idled;
- else
- ticks = 1;
- omap_32k_timer_start(ticks);
-}
-
-static struct irqaction omap_32k_timer_irq;
-extern struct timer_update_handler timer_update;
-
-static int omap_32k_timer_enable_dyn_tick(void)
-{
- /* No need to reprogram timer, just use the next interrupt */
- return 0;
-}
-
-static int omap_32k_timer_disable_dyn_tick(void)
-{
- omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
- return 0;
-}
-
-static struct dyn_tick_timer omap_dyn_tick_timer = {
- .enable = omap_32k_timer_enable_dyn_tick,
- .disable = omap_32k_timer_disable_dyn_tick,
- .reprogram = omap_32k_timer_reprogram,
- .handler = omap_32k_timer_handler,
-};
-#endif /* CONFIG_NO_IDLE_HZ */
-
static struct irqaction omap_32k_timer_irq = {
.name = "32KHz timer",
.flags = IRQF_DISABLED | IRQF_TIMER,
@@ -285,13 +221,8 @@ static struct irqaction omap_32k_timer_irq = {
static __init void omap_init_32k_timer(void)
{
-#ifdef CONFIG_NO_IDLE_HZ
- omap_timer.dyn_tick = &omap_dyn_tick_timer;
-#endif
-
if (cpu_class_is_omap1())
setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
- omap_timer.offset = omap_32k_timer_gettimeoffset;
omap_32k_last_tick = omap_32k_sync_timer_read();
#ifdef CONFIG_ARCH_OMAP2
@@ -308,7 +239,16 @@ static __init void omap_init_32k_timer(void)
}
#endif
- omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
+ clockevent_32k_timer.mult = div_sc(OMAP_32K_TICKS_PER_SEC,
+ NSEC_PER_SEC,
+ clockevent_32k_timer.shift);
+ clockevent_32k_timer.max_delta_ns =
+ clockevent_delta2ns(0xfffffffe, &clockevent_32k_timer);
+ clockevent_32k_timer.min_delta_ns =
+ clockevent_delta2ns(1, &clockevent_32k_timer);
+
+ clockevent_32k_timer.cpumask = cpumask_of_cpu(0);
+ clockevents_register_device(&clockevent_32k_timer);
}
/*
@@ -326,5 +266,4 @@ static void __init omap_timer_init(void)
struct sys_timer omap_timer = {
.init = omap_timer_init,
- .offset = NULL, /* Initialized later */
};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 02:57:44 +0000