diff options
Diffstat (limited to 'arch/arm/plat-omap')
53 files changed, 1309 insertions, 408 deletions
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index b917206ee90..a94f0c44ebc 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -15,6 +15,9 @@ config ARCH_OMAP1 config ARCH_OMAP2 bool "TI OMAP2" +config ARCH_OMAP3 + bool "TI OMAP3" + endchoice comment "OMAP Feature Selections" @@ -29,6 +32,30 @@ config OMAP_DEBUG_LEDS depends on OMAP_DEBUG_DEVICES default y if LEDS || LEDS_OMAP_DEBUG +config OMAP_DEBUG_POWERDOMAIN + bool "Emit debug messages from powerdomain layer" + depends on ARCH_OMAP2 || ARCH_OMAP3 + default n + help + Say Y here if you want to compile in powerdomain layer + debugging messages for OMAP2/3. These messages can + provide more detail as to why some powerdomain calls + may be failing, and will also emit a descriptive message + for every powerdomain register write. However, the + extra detail costs some memory. + +config OMAP_DEBUG_CLOCKDOMAIN + bool "Emit debug messages from clockdomain layer" + depends on ARCH_OMAP2 || ARCH_OMAP3 + default n + help + Say Y here if you want to compile in clockdomain layer + debugging messages for OMAP2/3. These messages can + provide more detail as to why some clockdomain calls + may be failing, and will also emit a descriptive message + for every clockdomain register write. However, the + extra detail costs some memory. + config OMAP_RESET_CLOCKS bool "Reset unused clocks during boot" depends on ARCH_OMAP @@ -88,13 +115,13 @@ config OMAP_MPU_TIMER config OMAP_32K_TIMER bool "Use 32KHz timer" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX help Select this option if you want to enable the OMAP 32KHz timer. This timer saves power compared to the OMAP_MPU_TIMER, and has support for no tick during idle. The 32KHz timer provides less intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is - currently only available for OMAP16XX and 24XX. + currently only available for OMAP16XX, 24XX and 34XX. endchoice @@ -109,7 +136,7 @@ config OMAP_32K_TIMER_HZ config OMAP_DM_TIMER bool "Use dual-mode timer" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX help Select this option if you want to use OMAP Dual-Mode timers. diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 2c4051cc79a..deaff58878a 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \ - usb.o fb.o + usb.o fb.o io.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 197974defbe..bf6a10c5fc4 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -22,8 +22,7 @@ #include <linux/platform_device.h> #include <linux/cpufreq.h> #include <linux/debugfs.h> - -#include <asm/io.h> +#include <linux/io.h> #include <mach/clock.h> diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index f4dff423ae7..0843b8882f9 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -18,12 +18,12 @@ #include <linux/serial_8250.h> #include <linux/serial_reg.h> #include <linux/clk.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/system.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <asm/io.h> #include <asm/setup.h> #include <mach/common.h> @@ -248,6 +248,7 @@ static struct omap_globals *omap2_globals; static void __init __omap2_set_globals(void) { + omap2_set_globals_tap(omap2_globals); omap2_set_globals_memory(omap2_globals); omap2_set_globals_control(omap2_globals); omap2_set_globals_prcm(omap2_globals); @@ -258,12 +259,13 @@ static void __init __omap2_set_globals(void) #if defined(CONFIG_ARCH_OMAP2420) static struct omap_globals omap242x_globals = { - .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x48014000), - .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE), - .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE), - .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE), - .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE), - .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CM_BASE), + .class = OMAP242X_CLASS, + .tap = OMAP2_IO_ADDRESS(0x48014000), + .sdrc = OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE), + .sms = OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE), + .ctrl = OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE), + .prm = OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE), + .cm = OMAP2_IO_ADDRESS(OMAP2420_CM_BASE), }; void __init omap2_set_globals_242x(void) @@ -276,12 +278,13 @@ void __init omap2_set_globals_242x(void) #if defined(CONFIG_ARCH_OMAP2430) static struct omap_globals omap243x_globals = { - .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4900a000), - .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE), - .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE), - .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE), - .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE), - .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_CM_BASE), + .class = OMAP243X_CLASS, + .tap = OMAP2_IO_ADDRESS(0x4900a000), + .sdrc = OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE), + .sms = OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE), + .ctrl = OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE), + .prm = OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE), + .cm = OMAP2_IO_ADDRESS(OMAP2430_CM_BASE), }; void __init omap2_set_globals_243x(void) @@ -294,12 +297,13 @@ void __init omap2_set_globals_243x(void) #if defined(CONFIG_ARCH_OMAP3430) static struct omap_globals omap343x_globals = { - .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4830A000), - .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE), - .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE), - .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE), - .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE), - .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_CM_BASE), + .class = OMAP343X_CLASS, + .tap = OMAP2_IO_ADDRESS(0x4830A000), + .sdrc = OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE), + .sms = OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE), + .ctrl = OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE), + .prm = OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE), + .cm = OMAP2_IO_ADDRESS(OMAP3430_CM_BASE), }; void __init omap2_set_globals_343x(void) diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index ae1de308aaa..b2690242a39 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -20,9 +20,9 @@ #include <linux/init.h> #include <linux/err.h> #include <linux/clk.h> +#include <linux/io.h> #include <mach/hardware.h> -#include <asm/io.h> #include <asm/system.h> #define VERY_HI_RATE 900000000 diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 5b73bb27445..e31154b15d9 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -12,9 +12,9 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/io.h> #include <mach/hardware.h> -#include <asm/io.h> #include <mach/board.h> #include <mach/gpio.h> diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index 9422dee7de8..2f4c0cabfd3 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -11,8 +11,8 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> +#include <linux/io.h> -#include <asm/io.h> #include <mach/hardware.h> #include <asm/leds.h> #include <asm/system.h> diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 01da719a745..0cb2b22388e 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -13,24 +13,24 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/io.h> #include <mach/hardware.h> -#include <asm/io.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include <mach/tc.h> +#include <mach/control.h> #include <mach/board.h> #include <mach/mmc.h> #include <mach/mux.h> #include <mach/gpio.h> #include <mach/menelaus.h> #include <mach/mcbsp.h> +#include <mach/dsp_common.h> #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) -#include "../plat-omap/dsp/dsp_common.h" - static struct dsp_platform_data dsp_pdata = { .kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list), }; @@ -76,7 +76,7 @@ int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev) { static DEFINE_MUTEX(dsp_pdata_lock); - mutex_init(&kdev->lock); + spin_lock_init(&kdev->lock); mutex_lock(&dsp_pdata_lock); list_add_tail(&kdev->entry, &dsp_pdata.kdev_list); @@ -95,6 +95,10 @@ static inline void omap_init_dsp(void) { } static void omap_init_kp(void) { + /* 2430 and 34xx keypad is on TWL4030 */ + if (cpu_is_omap2430() || cpu_is_omap34xx()) + return; + if (machine_is_omap_h2() || machine_is_omap_h3()) { omap_cfg_reg(F18_1610_KBC0); omap_cfg_reg(D20_1610_KBC1); @@ -156,13 +160,6 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, { int i; - if (size > OMAP_MAX_MCBSP_COUNT) { - printk(KERN_WARNING "Registered too many McBSPs platform_data." - " Using maximum (%d) available.\n", - OMAP_MAX_MCBSP_COUNT); - size = OMAP_MAX_MCBSP_COUNT; - } - omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *), GFP_KERNEL); if (!omap_mcbsp_devices) { @@ -441,16 +438,8 @@ static inline void omap_init_uwire(void) {} #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) -#ifdef CONFIG_ARCH_OMAP24XX -#define OMAP_WDT_BASE 0x48022000 -#else -#define OMAP_WDT_BASE 0xfffeb000 -#endif - static struct resource wdt_resources[] = { { - .start = OMAP_WDT_BASE, - .end = OMAP_WDT_BASE + 0x4f, .flags = IORESOURCE_MEM, }, }; @@ -464,6 +453,19 @@ static struct platform_device omap_wdt_device = { static void omap_init_wdt(void) { + if (cpu_is_omap16xx()) + wdt_resources[0].start = 0xfffeb000; + else if (cpu_is_omap2420()) + wdt_resources[0].start = 0x48022000; /* WDT2 */ + else if (cpu_is_omap2430()) + wdt_resources[0].start = 0x49016000; /* WDT2 */ + else if (cpu_is_omap343x()) + wdt_resources[0].start = 0x48314000; /* WDT2 */ + else + return; + + wdt_resources[0].end = wdt_resources[0].start + 0x4f; + (void) platform_device_register(&omap_wdt_device); } #else @@ -525,10 +527,6 @@ static inline void omap_init_rng(void) {} */ static int __init omap_init_devices(void) { -/* - * Need to enable relevant once for 2430 SDP - */ -#ifndef CONFIG_MACH_OMAP_2430SDP /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ @@ -538,7 +536,6 @@ static int __init omap_init_devices(void) omap_init_uwire(); omap_init_wdt(); omap_init_rng(); -#endif return 0; } arch_initcall(omap_init_devices); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index a63b644ad30..50f8b4ad9a0 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1233,7 +1233,7 @@ int omap_request_dma_chain(int dev_id, const char *dev_name, /* request and reserve DMA channels for the chain */ for (i = 0; i < no_of_chans; i++) { err = omap_request_dma(dev_id, dev_name, - callback, 0, &channels[i]); + callback, NULL, &channels[i]); if (err < 0) { int j; for (j = 0; j < i; j++) @@ -2297,13 +2297,13 @@ static int __init omap_init_dma(void) int ch, r; if (cpu_class_is_omap1()) { - omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP1_DMA_BASE); + omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE); dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap24xx()) { - omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP24XX_DMA4_BASE); + omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE); dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap34xx()) { - omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP34XX_DMA4_BASE); + omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE); dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else { pr_err("DMA init failed for unsupported omap\n"); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 743a4abcd85..963c31cd154 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -32,9 +32,9 @@ #include <linux/list.h> #include <linux/clk.h> #include <linux/delay.h> +#include <linux/io.h> #include <mach/hardware.h> #include <mach/dmtimer.h> -#include <asm/io.h> #include <mach/irqs.h> /* register offsets */ @@ -693,7 +693,7 @@ int __init omap_dm_timer_init(void) for (i = 0; i < dm_timer_count; i++) { timer = &dm_timers[i]; - timer->io_base = (void __iomem *)io_p2v(timer->phys_base); + timer->io_base = IO_ADDRESS(timer->phys_base); #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) if (cpu_class_is_omap2()) { char clk_name[16]; diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 17a92a31e74..ce6b4baeede 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -27,9 +27,9 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/bootmem.h> +#include <linux/io.h> #include <mach/hardware.h> -#include <asm/io.h> #include <asm/mach/map.h> #include <mach/board.h> diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 9e1341ebc14..8679fbca6bb 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -17,6 +17,7 @@ #include <linux/sysdev.h> #include <linux/err.h> #include <linux/clk.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -24,12 +25,10 @@ #include <mach/gpio.h> #include <asm/mach/irq.h> -#include <asm/io.h> - /* * OMAP1510 GPIO registers */ -#define OMAP1510_GPIO_BASE (void __iomem *)0xfffce000 +#define OMAP1510_GPIO_BASE IO_ADDRESS(0xfffce000) #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 @@ -43,10 +42,10 @@ /* * OMAP1610 specific GPIO registers */ -#define OMAP1610_GPIO1_BASE (void __iomem *)0xfffbe400 -#define OMAP1610_GPIO2_BASE (void __iomem *)0xfffbec00 -#define OMAP1610_GPIO3_BASE (void __iomem *)0xfffbb400 -#define OMAP1610_GPIO4_BASE (void __iomem *)0xfffbbc00 +#define OMAP1610_GPIO1_BASE IO_ADDRESS(0xfffbe400) +#define OMAP1610_GPIO2_BASE IO_ADDRESS(0xfffbec00) +#define OMAP1610_GPIO3_BASE IO_ADDRESS(0xfffbb400) +#define OMAP1610_GPIO4_BASE IO_ADDRESS(0xfffbbc00) #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 @@ -68,12 +67,12 @@ /* * OMAP730 specific GPIO registers */ -#define OMAP730_GPIO1_BASE (void __iomem *)0xfffbc000 -#define OMAP730_GPIO2_BASE (void __iomem *)0xfffbc800 -#define OMAP730_GPIO3_BASE (void __iomem *)0xfffbd000 -#define OMAP730_GPIO4_BASE (void __iomem *)0xfffbd800 -#define OMAP730_GPIO5_BASE (void __iomem *)0xfffbe000 -#define OMAP730_GPIO6_BASE (void __iomem *)0xfffbe800 +#define OMAP730_GPIO1_BASE IO_ADDRESS(0xfffbc000) +#define OMAP730_GPIO2_BASE IO_ADDRESS(0xfffbc800) +#define OMAP730_GPIO3_BASE IO_ADDRESS(0xfffbd000) +#define OMAP730_GPIO4_BASE IO_ADDRESS(0xfffbd800) +#define OMAP730_GPIO5_BASE IO_ADDRESS(0xfffbe000) +#define OMAP730_GPIO6_BASE IO_ADDRESS(0xfffbe800) #define OMAP730_GPIO_DATA_INPUT 0x00 #define OMAP730_GPIO_DATA_OUTPUT 0x04 #define OMAP730_GPIO_DIR_CONTROL 0x08 @@ -84,16 +83,16 @@ /* * omap24xx specific GPIO registers */ -#define OMAP242X_GPIO1_BASE (void __iomem *)0x48018000 -#define OMAP242X_GPIO2_BASE (void __iomem *)0x4801a000 -#define OMAP242X_GPIO3_BASE (void __iomem *)0x4801c000 -#define OMAP242X_GPIO4_BASE (void __iomem *)0x4801e000 +#define OMAP242X_GPIO1_BASE IO_ADDRESS(0x48018000) +#define OMAP242X_GPIO2_BASE IO_ADDRESS(0x4801a000) +#define OMAP242X_GPIO3_BASE IO_ADDRESS(0x4801c000) +#define OMAP242X_GPIO4_BASE IO_ADDRESS(0x4801e000) -#define OMAP243X_GPIO1_BASE (void __iomem *)0x4900C000 -#define OMAP243X_GPIO2_BASE (void __iomem *)0x4900E000 -#define OMAP243X_GPIO3_BASE (void __iomem *)0x49010000 -#define OMAP243X_GPIO4_BASE (void __iomem *)0x49012000 -#define OMAP243X_GPIO5_BASE (void __iomem *)0x480B6000 +#define OMAP243X_GPIO1_BASE IO_ADDRESS(0x4900C000) +#define OMAP243X_GPIO2_BASE IO_ADDRESS(0x4900E000) +#define OMAP243X_GPIO3_BASE IO_ADDRESS(0x49010000) +#define OMAP243X_GPIO4_BASE IO_ADDRESS(0x49012000) +#define OMAP243X_GPIO5_BASE IO_ADDRESS(0x480B6000) #define OMAP24XX_GPIO_REVISION 0x0000 #define OMAP24XX_GPIO_SYSCONFIG 0x0010 @@ -123,13 +122,14 @@ * omap34xx specific GPIO registers */ -#define OMAP34XX_GPIO1_BASE (void __iomem *)0x48310000 -#define OMAP34XX_GPIO2_BASE (void __iomem *)0x49050000 -#define OMAP34XX_GPIO3_BASE (void __iomem *)0x49052000 -#define OMAP34XX_GPIO4_BASE (void __iomem *)0x49054000 -#define OMAP34XX_GPIO5_BASE (void __iomem *)0x49056000 -#define OMAP34XX_GPIO6_BASE (void __iomem *)0x49058000 +#define OMAP34XX_GPIO1_BASE IO_ADDRESS(0x48310000) +#define OMAP34XX_GPIO2_BASE IO_ADDRESS(0x49050000) +#define OMAP34XX_GPIO3_BASE IO_ADDRESS(0x49052000) +#define OMAP34XX_GPIO4_BASE IO_ADDRESS(0x49054000) +#define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000) +#define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000) +#define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE) struct gpio_bank { void __iomem *base; @@ -161,7 +161,7 @@ struct gpio_bank { #ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { - { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, + { OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 }, { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 }, { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 }, @@ -171,14 +171,14 @@ static struct gpio_bank gpio_bank_1610[5] = { #ifdef CONFIG_ARCH_OMAP15XX static struct gpio_bank gpio_bank_1510[2] = { - { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, + { OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 } }; #endif #ifdef CONFIG_ARCH_OMAP730 static struct gpio_bank gpio_bank_730[7] = { - { OMAP_MPUIO_BASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, + { OMAP_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, @@ -1051,13 +1051,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) gpio_irq = bank->virtual_irq_start; for (; isr != 0; isr >>= 1, gpio_irq++) { - struct irq_desc *d; - if (!(isr & 1)) continue; - d = irq_desc + gpio_irq; - desc_handle_irq(gpio_irq, d); + generic_handle_irq(gpio_irq); } } /* if bank has any level sensitive GPIO pin interrupt @@ -1393,7 +1390,7 @@ static int __init _omap_gpio_init(void) gpio_bank_count = 5; gpio_bank = gpio_bank_1610; - rev = omap_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); + rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } @@ -1412,7 +1409,7 @@ static int __init _omap_gpio_init(void) gpio_bank_count = 4; gpio_bank = gpio_bank_242x; - rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } @@ -1421,7 +1418,7 @@ static int __init _omap_gpio_init(void) gpio_bank_count = 5; gpio_bank = gpio_bank_243x; - rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } @@ -1432,7 +1429,7 @@ static int __init _omap_gpio_init(void) gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_34xx; - rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } @@ -1441,10 +1438,9 @@ static int __init _omap_gpio_init(void) int j, gpio_count = 16; bank = &gpio_bank[i]; - bank->base = IO_ADDRESS(bank->base); spin_lock_init(&bank->lock); if (bank_is_mpuio(bank)) - omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT); + __raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT); if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS); diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h index cf1dc022394..10d449ea7ed 100644 --- a/arch/arm/plat-omap/include/mach/board-2430sdp.h +++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h @@ -30,10 +30,12 @@ #define __ASM_ARCH_OMAP_2430SDP_H /* Placeholder for 2430SDP specific defines */ -#define OMAP24XX_ETHR_START 0x08000300 +#define OMAP24XX_ETHR_START 0x08000300 #define OMAP24XX_ETHR_GPIO_IRQ 149 #define SDP2430_CS0_BASE 0x04000000 -#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ +/* Function prototypes */ +extern void sdp2430_flash_init(void); +extern void sdp2430_usb_init(void); #endif /* __ASM_ARCH_OMAP_2430SDP_H */ diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h index d6f2a8e963d..731c858cf3f 100644 --- a/arch/arm/plat-omap/include/mach/board-apollon.h +++ b/arch/arm/plat-omap/include/mach/board-apollon.h @@ -31,6 +31,12 @@ extern void apollon_mmc_init(void); +static inline int apollon_plus(void) +{ + /* The apollon plus has IDCODE revision 5 */ + return system_rev & 0xc0; +} + /* Placeholder for APOLLON specific defines */ #define APOLLON_ETHR_GPIO_IRQ 74 diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h index 1470cd3e519..7c3fa0f0a65 100644 --- a/arch/arm/plat-omap/include/mach/board-h4.h +++ b/arch/arm/plat-omap/include/mach/board-h4.h @@ -1,7 +1,7 @@ /* * arch/arm/plat-omap/include/mach/board-h4.h * - * Hardware definitions for TI OMAP1610 H4 board. + * Hardware definitions for TI OMAP2420 H4 board. * * Initial creation by Dirk Behme <dirk.behme@de.bosch.com> * @@ -29,6 +29,9 @@ #ifndef __ASM_ARCH_OMAP_H4_H #define __ASM_ARCH_OMAP_H4_H +/* MMC Prototypes */ +extern void h4_mmc_init(void); + /* Placeholder for H4 specific defines */ #define OMAP24XX_ETHR_GPIO_IRQ 92 #endif /* __ASM_ARCH_OMAP_H4_H */ diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h new file mode 100644 index 00000000000..66e2746c04c --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-ldp.h @@ -0,0 +1,36 @@ +/* + * arch/arm/plat-omap/include/mach/board-ldp.h + * + * Hardware definitions for TI OMAP3 LDP. + * + * Copyright (C) 2008 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_LDP_H +#define __ASM_ARCH_OMAP_LDP_H + +extern void twl4030_bci_battery_init(void); + +#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ + +#endif /* __ASM_ARCH_OMAP_LDP_H */ diff --git a/arch/arm/plat-omap/include/mach/board-omap3beagle.h b/arch/arm/plat-omap/include/mach/board-omap3beagle.h new file mode 100644 index 00000000000..3080d52d877 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-omap3beagle.h @@ -0,0 +1,33 @@ +/* + * arch/arm/plat-omap/include/mach/board-omap3beagle.h + * + * Hardware definitions for TI OMAP3 BEAGLE. + * + * Initial creation by Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP3_BEAGLE_H +#define __ASM_ARCH_OMAP3_BEAGLE_H + +#endif /* __ASM_ARCH_OMAP3_BEAGLE_H */ + diff --git a/arch/arm/plat-omap/include/mach/board-overo.h b/arch/arm/plat-omap/include/mach/board-overo.h new file mode 100644 index 00000000000..7ecae66966d --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-overo.h @@ -0,0 +1,26 @@ +/* + * board-overo.h (Gumstix Overo) + * + * Initial code: Steve Sakoman <steve@sakoman.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OVERO_H +#define __ASM_ARCH_OVERO_H + +#define OVERO_GPIO_BT_XGATE 15 +#define OVERO_GPIO_W2W_NRESET 16 +#define OVERO_GPIO_BT_NRESET 164 +#define OVERO_GPIO_USBH_CPEN 168 +#define OVERO_GPIO_USBH_NRESET 183 + +#endif /* ____ASM_ARCH_OVERO_H */ + diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h index 54445642f35..c23c12ccb35 100644 --- a/arch/arm/plat-omap/include/mach/board.h +++ b/arch/arm/plat-omap/include/mach/board.h @@ -45,6 +45,8 @@ struct omap_mmc_conf { unsigned cover:1; /* 4 wire signaling is optional, and is only used for SD/SDIO */ unsigned wire4:1; + /* use the internal clock */ + unsigned internal_clock:1; s16 power_pin; s16 switch_pin; s16 wp_pin; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 92f7c7238fc..719298554ed 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -15,6 +15,7 @@ struct module; struct clk; +struct clockdomain; #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) @@ -79,6 +80,8 @@ struct clk { u32 clksel_mask; const struct clksel *clksel; struct dpll_data *dpll_data; + const char *clkdm_name; + struct clockdomain *clkdm; #else __u8 rate_offset; __u8 src_offset; diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h new file mode 100644 index 00000000000..1f51f017378 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/clockdomain.h @@ -0,0 +1,106 @@ +/* + * linux/include/asm-arm/arch-omap/clockdomain.h + * + * OMAP2/3 clockdomain framework functions + * + * Copyright (C) 2008 Texas Instruments, Inc. + * Copyright (C) 2008 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H +#define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H + +#include <mach/powerdomain.h> +#include <mach/clock.h> +#include <mach/cpu.h> + +/* Clockdomain capability flags */ +#define CLKDM_CAN_FORCE_SLEEP (1 << 0) +#define CLKDM_CAN_FORCE_WAKEUP (1 << 1) +#define CLKDM_CAN_ENABLE_AUTO (1 << 2) +#define CLKDM_CAN_DISABLE_AUTO (1 << 3) + +#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO) +#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP) +#define CLKDM_CAN_HWSUP_SWSUP (CLKDM_CAN_SWSUP | CLKDM_CAN_HWSUP) + +/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */ +#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO 0x0 +#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO 0x1 + +/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */ +#define OMAP34XX_CLKSTCTRL_DISABLE_AUTO 0x0 +#define OMAP34XX_CLKSTCTRL_FORCE_SLEEP 0x1 +#define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP 0x2 +#define OMAP34XX_CLKSTCTRL_ENABLE_AUTO 0x3 + +/* + * struct clkdm_pwrdm_autodep - a powerdomain that should have wkdeps + * and sleepdeps added when a powerdomain should stay active in hwsup mode; + * and conversely, removed when the powerdomain should be allowed to go + * inactive in hwsup mode. + */ +struct clkdm_pwrdm_autodep { + + /* Name of the powerdomain to add a wkdep/sleepdep on */ + const char *pwrdm_name; + + /* Powerdomain pointer (looked up at clkdm_init() time) */ + struct powerdomain *pwrdm; + + /* OMAP chip types that this clockdomain dep is valid on */ + const struct omap_chip_id omap_chip; + +}; + +struct clockdomain { + + /* Clockdomain name */ + const char *name; + + /* Powerdomain enclosing this clockdomain */ + const char *pwrdm_name; + + /* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */ + const u16 clktrctrl_mask; + + /* Clockdomain capability flags */ + const u8 flags; + + /* OMAP chip types that this clockdomain is valid on */ + const struct omap_chip_id omap_chip; + + /* Usecount tracking */ + atomic_t usecount; + + /* Powerdomain pointer assigned at clkdm_register() */ + struct powerdomain *pwrdm; + + struct list_head node; + +}; + +void clkdm_init(struct clockdomain **clkdms, struct clkdm_pwrdm_autodep *autodeps); +int clkdm_register(struct clockdomain *clkdm); +int clkdm_unregister(struct clockdomain *clkdm); +struct clockdomain *clkdm_lookup(const char *name); + +int clkdm_for_each(int (*fn)(struct clockdomain *clkdm)); +struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm); + +void omap2_clkdm_allow_idle(struct clockdomain *clkdm); +void omap2_clkdm_deny_idle(struct clockdomain *clkdm); + +int omap2_clkdm_wakeup(struct clockdomain *clkdm); +int omap2_clkdm_sleep(struct clockdomain *clkdm); + +int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk); +int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk); + +#endif diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index 06093112b66..ef70e2b0f05 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -34,6 +34,7 @@ struct sys_timer; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; extern void omap_serial_init(void); +extern void omap_serial_enable_clocks(int enable); #ifdef CONFIG_I2C_OMAP extern int omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, @@ -49,6 +50,7 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, /* IO bases for various OMAP processors */ struct omap_globals { + u32 class; /* OMAP class to detect */ void __iomem *tap; /* Control module ID code */ void __iomem *sdrc; /* SDRAM Controller */ void __iomem *sms; /* SDRAM Memory Scheduler */ @@ -62,6 +64,7 @@ void omap2_set_globals_243x(void); void omap2_set_globals_343x(void); /* These get called from omap2_set_globals_xxxx(), do not call these */ +void omap2_set_globals_tap(struct omap_globals *); void omap2_set_globals_memory(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h index e3fd62d9a99..dc988676057 100644 --- a/arch/arm/plat-omap/include/mach/control.h +++ b/arch/arm/plat-omap/include/mach/control.h @@ -1,13 +1,10 @@ -#ifndef __ASM_ARCH_CONTROL_H -#define __ASM_ARCH_CONTROL_H - /* * arch/arm/plat-omap/include/mach/control.h * * OMAP2/3 System Control Module definitions * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation * * Written by Paul Walmsley * @@ -16,14 +13,23 @@ * the Free Software Foundation. */ +#ifndef __ASM_ARCH_CONTROL_H +#define __ASM_ARCH_CONTROL_H + #include <mach/io.h> +#ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) + IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) #define OMAP243X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) + IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) + IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#else +#define OMAP242X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#endif /* __ASSEMBLY__ */ /* * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for @@ -134,6 +140,7 @@ #define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) #define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) #define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) +#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4) /* * REVISIT: This list of registers is not comprehensive - there are more diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index 05aee0eda34..e0464187209 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -346,9 +346,14 @@ IS_OMAP_TYPE(3430, 0x3430) get_sil_revision(system_rev) /* Various silicon macros defined here */ +#define OMAP242X_CLASS 0x24200000 #define OMAP2420_REV_ES1_0 0x24200000 #define OMAP2420_REV_ES2_0 0x24201000 + +#define OMAP243X_CLASS 0x24300000 #define OMAP2430_REV_ES1_0 0x24300000 + +#define OMAP343X_CLASS 0x34300000 #define OMAP3430_REV_ES1_0 0x34300000 #define OMAP3430_REV_ES2_0 0x34301000 #define OMAP3430_REV_ES2_1 0x34302000 diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S index 1b0039bdeb4..1b11f5c6a2d 100644 --- a/arch/arm/plat-omap/include/mach/debug-macro.S +++ b/arch/arm/plat-omap/include/mach/debug-macro.S @@ -35,6 +35,18 @@ #ifdef CONFIG_OMAP_LL_DEBUG_UART3 add \rx, \rx, #0x00004000 @ UART 3 #endif + +#elif CONFIG_ARCH_OMAP3 + moveq \rx, #0x48000000 @ physical base address + movne \rx, #0xd8000000 @ virtual base + orr \rx, \rx, #0x0006a000 +#ifdef CONFIG_OMAP_LL_DEBUG_UART2 + add \rx, \rx, #0x00002000 @ UART 2 +#endif +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + add \rx, \rx, #0x00fb0000 @ UART 3 + add \rx, \rx, #0x00006000 +#endif #endif .endm diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index d4e9043bf20..030118ee204 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -55,9 +55,17 @@ 1510: .endm -#elif defined(CONFIG_ARCH_OMAP24XX) +#endif +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) #include <mach/omap24xx.h> +#endif +#if defined(CONFIG_ARCH_OMAP34XX) +#include <mach/omap34xx.h> +#endif + +#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt number */ .macro disable_fiq .endm @@ -79,7 +87,7 @@ ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ cmp \irqnr, #0x0 2222: - ldrne \irqnr, [\base, #IRQ_SIR_IRQ] + ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] .endm diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h index c92e4b42b28..f1864a652f7 100644 --- a/arch/arm/plat-omap/include/mach/fpga.h +++ b/arch/arm/plat-omap/include/mach/fpga.h @@ -34,9 +34,9 @@ extern void omap1510_fpga_init_irq(void); * --------------------------------------------------------------------------- */ /* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ -#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ -#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ +#define H2P2_DBG_FPGA_BASE IOMEM(0xE8000000) /* VA */ +#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ +#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ #define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) #define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ @@ -85,9 +85,9 @@ struct h2p2_dbg_fpga { * OMAP-1510 FPGA * --------------------------------------------------------------------------- */ -#define OMAP1510_FPGA_BASE 0xE8000000 /* Virtual */ -#define OMAP1510_FPGA_SIZE SZ_4K -#define OMAP1510_FPGA_START 0x08000000 /* Physical */ +#define OMAP1510_FPGA_BASE IOMEM(0xE8000000) /* VA */ +#define OMAP1510_FPGA_SIZE SZ_4K +#define OMAP1510_FPGA_START 0x08000000 /* PA */ /* Revision */ #define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0) diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h index 94ce2780e8e..98e9008b7e9 100644 --- a/arch/arm/plat-omap/include/mach/gpio.h +++ b/arch/arm/plat-omap/include/mach/gpio.h @@ -26,10 +26,10 @@ #ifndef __ASM_ARCH_OMAP_GPIO_H #define __ASM_ARCH_OMAP_GPIO_H +#include <linux/io.h> #include <mach/irqs.h> -#include <asm/io.h> -#define OMAP_MPUIO_BASE (void __iomem *)0xfffb5000 +#define OMAP_MPUIO_BASE 0xfffb5000 #ifdef CONFIG_ARCH_OMAP730 #define OMAP_MPUIO_INPUT_LATCH 0x00 @@ -76,6 +76,8 @@ extern void omap_free_gpio(int gpio); extern void omap_set_gpio_direction(int gpio, int is_input); extern void omap_set_gpio_dataout(int gpio, int enable); extern int omap_get_gpio_datain(int gpio); +extern void omap2_gpio_prepare_for_retention(void); +extern void omap2_gpio_resume_after_retention(void); extern void omap_set_gpio_debounce(int gpio, int enable); extern void omap_set_gpio_debounce_time(int gpio, int enable); diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h index 6a8e07ffc2d..45b678439bb 100644 --- a/arch/arm/plat-omap/include/mach/gpmc.h +++ b/arch/arm/plat-omap/include/mach/gpmc.h @@ -11,6 +11,9 @@ #ifndef __OMAP2_GPMC_H #define __OMAP2_GPMC_H +/* Maximum Number of Chip Selects */ +#define GPMC_CS_NUM 8 + #define GPMC_CS_CONFIG1 0x00 #define GPMC_CS_CONFIG2 0x04 #define GPMC_CS_CONFIG3 0x08 @@ -22,6 +25,9 @@ #define GPMC_CS_NAND_ADDRESS 0x20 #define GPMC_CS_NAND_DATA 0x24 +#define GPMC_CONFIG 0x50 +#define GPMC_STATUS 0x54 + #define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) #define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) #define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) @@ -78,9 +84,14 @@ struct gpmc_timings { u16 access; /* Start-cycle to first data valid delay */ u16 rd_cycle; /* Total read cycle time */ u16 wr_cycle; /* Total write cycle time */ + + /* The following are only on OMAP3430 */ + u16 wr_access; /* WRACCESSTIME */ + u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ }; extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); +extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); extern unsigned long gpmc_get_fclk_period(void); @@ -92,5 +103,6 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); extern int gpmc_cs_set_reserved(int cs, int reserved); extern int gpmc_cs_reserved(int cs); +extern void gpmc_init(void); #endif diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index 07f5d7f2152..6589ddbb63b 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -89,7 +89,7 @@ #define DPLL_CTL (0xfffecf00) /* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ -#define DSP_CONFIG_REG_BASE (0xe1008000) +#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) #define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) #define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) #define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) @@ -282,8 +282,8 @@ #include "omap730.h" #include "omap1510.h" -#include "omap24xx.h" #include "omap16xx.h" +#include "omap24xx.h" #include "omap34xx.h" #ifndef __ASSEMBLER__ @@ -322,6 +322,14 @@ #include "board-2430sdp.h" #endif +#ifdef CONFIG_MACH_OMAP3_BEAGLE +#include "board-omap3beagle.h" +#endif + +#ifdef CONFIG_MACH_OMAP_LDP +#include "board-ldp.h" +#endif + #ifdef CONFIG_MACH_OMAP_APOLLON #include "board-apollon.h" #endif diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 2a30b7d88cd..adc83b7b820 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -55,14 +55,13 @@ #if defined(CONFIG_ARCH_OMAP1) -#define IO_PHYS 0xFFFB0000 -#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define IO_SIZE 0x40000 -#define IO_VIRT (IO_PHYS - IO_OFFSET) -#define IO_ADDRESS(pa) ((pa) - IO_OFFSET) -#define OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET) -#define io_p2v(pa) ((pa) - IO_OFFSET) -#define io_v2p(va) ((va) + IO_OFFSET) +#define IO_PHYS 0xFFFB0000 +#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define IO_SIZE 0x40000 +#define IO_VIRT (IO_PHYS - IO_OFFSET) +#define __IO_ADDRESS(pa) ((pa) - IO_OFFSET) +#define __OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET) +#define io_v2p(va) ((va) + IO_OFFSET) #elif defined(CONFIG_ARCH_OMAP2) @@ -74,7 +73,6 @@ #define L4_24XX_VIRT 0xd8000000 #define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ -#ifdef CONFIG_ARCH_OMAP2430 #define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */ #define L4_WK_243X_VIRT 0xd9000000 #define L4_WK_243X_SIZE SZ_1M @@ -88,13 +86,10 @@ #define OMAP243X_SMS_VIRT 0xFC000000 #define OMAP243X_SMS_SIZE SZ_1M -#endif - -#define IO_OFFSET 0x90000000 -#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */ +#define IO_OFFSET 0x90000000 +#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ +#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ +#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */ /* DSP */ #define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ @@ -149,9 +144,8 @@ #define IO_OFFSET 0x90000000 -#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ #define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */ /* DSP */ @@ -167,7 +161,14 @@ #endif -#ifndef __ASSEMBLER__ +#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa)) +#define OMAP1_IO_ADDRESS(pa) IOMEM(__OMAP1_IO_ADDRESS(pa)) +#define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa)) + +#ifdef __ASSEMBLER__ +#define IOMEM(x) x +#else +#define IOMEM(x) ((void __force __iomem *)(x)) /* * Functions to access the OMAP IO region @@ -178,13 +179,13 @@ * - DO NOT use hardcoded virtual addresses to allow changing the * IO address space again if needed */ -#define omap_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a)) -#define omap_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a)) -#define omap_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a)) +#define omap_readb(a) __raw_readb(IO_ADDRESS(a)) +#define omap_readw(a) __raw_readw(IO_ADDRESS(a)) +#define omap_readl(a) __raw_readl(IO_ADDRESS(a)) -#define omap_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v)) -#define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v)) -#define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v)) +#define omap_writeb(v,a) __raw_writeb(v, IO_ADDRESS(a)) +#define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a)) +#define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a)) extern void omap1_map_common_io(void); extern void omap1_init_common_hw(void); @@ -192,6 +193,12 @@ extern void omap1_init_common_hw(void); extern void omap2_map_common_io(void); extern void omap2_init_common_hw(void); +#define __arch_ioremap(p,s,t) omap_ioremap(p,s,t) +#define __arch_iounmap(v) omap_iounmap(v) + +void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type); +void omap_iounmap(volatile void __iomem *addr); + #endif #endif diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index 17248bbf3f2..a2929ac8c68 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -125,6 +125,7 @@ #define INT_UART2 (15 + IH2_BASE) #define INT_BT_MCSI1TX (16 + IH2_BASE) #define INT_BT_MCSI1RX (17 + IH2_BASE) +#define INT_SOSSI_MATCH (19 + IH2_BASE) #define INT_USB_W2FC (20 + IH2_BASE) #define INT_1WIRE (21 + IH2_BASE) #define INT_OS_TIMER (22 + IH2_BASE) @@ -176,6 +177,7 @@ #define INT_1610_DMA_CH14 (61 + IH2_BASE) #define INT_1610_DMA_CH15 (62 + IH2_BASE) #define INT_1610_NAND (63 + IH2_BASE) +#define INT_1610_SHA1MD5 (91 + IH2_BASE) /* * OMAP-730 specific IRQ numbers for interrupt handler 2 @@ -263,12 +265,18 @@ #define INT_24XX_GPTIMER10 46 #define INT_24XX_GPTIMER11 47 #define INT_24XX_GPTIMER12 48 +#define INT_24XX_SHA1MD5 51 +#define INT_24XX_MCBSP4_IRQ_TX 54 +#define INT_24XX_MCBSP4_IRQ_RX 55 #define INT_24XX_I2C1_IRQ 56 #define INT_24XX_I2C2_IRQ 57 +#define INT_24XX_HDQ_IRQ 58 #define INT_24XX_MCBSP1_IRQ_TX 59 #define INT_24XX_MCBSP1_IRQ_RX 60 #define INT_24XX_MCBSP2_IRQ_TX 62 #define INT_24XX_MCBSP2_IRQ_RX 63 +#define INT_24XX_SPI1_IRQ 65 +#define INT_24XX_SPI2_IRQ 66 #define INT_24XX_UART1_IRQ 72 #define INT_24XX_UART2_IRQ 73 #define INT_24XX_UART3_IRQ 74 @@ -278,7 +286,60 @@ #define INT_24XX_USB_IRQ_HGEN 78 #define INT_24XX_USB_IRQ_HSOF 79 #define INT_24XX_USB_IRQ_OTG 80 +#define INT_24XX_MCBSP5_IRQ_TX 81 +#define INT_24XX_MCBSP5_IRQ_RX 82 #define INT_24XX_MMC_IRQ 83 +#define INT_24XX_MMC2_IRQ 86 +#define INT_24XX_MCBSP3_IRQ_TX 89 +#define INT_24XX_MCBSP3_IRQ_RX 90 +#define INT_24XX_SPI3_IRQ 91 + +#define INT_243X_MCBSP2_IRQ 16 +#define INT_243X_MCBSP3_IRQ 17 +#define INT_243X_MCBSP4_IRQ 18 +#define INT_243X_MCBSP5_IRQ 19 +#define INT_243X_MCBSP1_IRQ 64 +#define INT_243X_HS_USB_MC 92 +#define INT_243X_HS_USB_DMA 93 +#define INT_243X_CARKIT_IRQ 94 + +#define INT_34XX_BENCH_MPU_EMUL 3 +#define INT_34XX_ST_MCBSP2_IRQ 4 +#define INT_34XX_ST_MCBSP3_IRQ 5 +#define INT_34XX_SSM_ABORT_IRQ 6 +#define INT_34XX_SYS_NIRQ 7 +#define INT_34XX_D2D_FW_IRQ 8 +#define INT_34XX_PRCM_MPU_IRQ 11 +#define INT_34XX_MCBSP1_IRQ 16 +#define INT_34XX_MCBSP2_IRQ 17 +#define INT_34XX_MCBSP3_IRQ 22 +#define INT_34XX_MCBSP4_IRQ 23 +#define INT_34XX_CAM_IRQ 24 +#define INT_34XX_MCBSP5_IRQ 27 +#define INT_34XX_GPIO_BANK1 29 +#define INT_34XX_GPIO_BANK2 30 +#define INT_34XX_GPIO_BANK3 31 +#define INT_34XX_GPIO_BANK4 32 +#define INT_34XX_GPIO_BANK5 33 +#define INT_34XX_GPIO_BANK6 34 +#define INT_34XX_USIM_IRQ 35 +#define INT_34XX_WDT3_IRQ 36 +#define INT_34XX_SPI4_IRQ 48 +#define INT_34XX_SHA1MD52_IRQ 49 +#define INT_34XX_FPKA_READY_IRQ 50 +#define INT_34XX_SHA1MD51_IRQ 51 +#define INT_34XX_RNG_IRQ 52 +#define INT_34XX_I2C3_IRQ 61 +#define INT_34XX_FPKA_ERROR_IRQ 64 +#define INT_34XX_PBIAS_IRQ 75 +#define INT_34XX_OHCI_IRQ 76 +#define INT_34XX_EHCI_IRQ 77 +#define INT_34XX_TLL_IRQ 78 +#define INT_34XX_PARTHASH_IRQ 79 +#define INT_34XX_MMC3_IRQ 94 +#define INT_34XX_GPT12_IRQ 95 + +#define INT_34XX_BENCH_MPU_EMUL 3 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and * 16 MPUIO lines */ diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 8fdb95e26fc..6a0d1a0a24a 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -43,9 +43,15 @@ #define OMAP24XX_MCBSP1_BASE 0x48074000 #define OMAP24XX_MCBSP2_BASE 0x48076000 +#define OMAP2430_MCBSP3_BASE 0x4808c000 +#define OMAP2430_MCBSP4_BASE 0x4808e000 +#define OMAP2430_MCBSP5_BASE 0x48096000 #define OMAP34XX_MCBSP1_BASE 0x48074000 #define OMAP34XX_MCBSP2_BASE 0x49022000 +#define OMAP34XX_MCBSP3_BASE 0x49024000 +#define OMAP34XX_MCBSP4_BASE 0x49026000 +#define OMAP34XX_MCBSP5_BASE 0x48096000 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) @@ -81,9 +87,6 @@ #define OMAP_MCBSP_REG_XCERG 0x3A #define OMAP_MCBSP_REG_XCERH 0x3C -#define OMAP_MAX_MCBSP_COUNT 3 -#define MAX_MCBSP_CLOCKS 3 - #define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1) #define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1) @@ -91,12 +94,14 @@ #define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX #define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX -#elif defined(CONFIG_ARCH_OMAP24XX) +#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define OMAP_MCBSP_REG_DRR2 0x00 #define OMAP_MCBSP_REG_DRR1 0x04 #define OMAP_MCBSP_REG_DXR2 0x08 #define OMAP_MCBSP_REG_DXR1 0x0C +#define OMAP_MCBSP_REG_DRR 0x00 +#define OMAP_MCBSP_REG_DXR 0x08 #define OMAP_MCBSP_REG_SPCR2 0x10 #define OMAP_MCBSP_REG_SPCR1 0x14 #define OMAP_MCBSP_REG_RCR2 0x18 @@ -124,9 +129,9 @@ #define OMAP_MCBSP_REG_RCERH 0x70 #define OMAP_MCBSP_REG_XCERG 0x74 #define OMAP_MCBSP_REG_XCERH 0x78 - -#define OMAP_MAX_MCBSP_COUNT 2 -#define MAX_MCBSP_CLOCKS 2 +#define OMAP_MCBSP_REG_SYSCON 0x8C +#define OMAP_MCBSP_REG_XCCR 0xAC +#define OMAP_MCBSP_REG_RCCR 0xB0 #define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1) #define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1) @@ -137,10 +142,6 @@ #endif -#define OMAP_MCBSP_READ(base, reg) __raw_readw((base) + OMAP_MCBSP_REG_##reg) -#define OMAP_MCBSP_WRITE(base, reg, val) __raw_writew((val), (base) + OMAP_MCBSP_REG_##reg) - - /************************** McBSP SPCR1 bit definitions ***********************/ #define RRST 0x0001 #define RRDY 0x0002 @@ -151,6 +152,7 @@ #define DXENA 0x0080 #define CLKSTP(value) ((value)<<11) /* bits 11:12 */ #define RJUST(value) ((value)<<13) /* bits 13:14 */ +#define ALB 0x8000 #define DLB 0x8000 /************************** McBSP SPCR2 bit definitions ***********************/ @@ -228,6 +230,17 @@ #define XPABLK(value) ((value)<<5) /* Bits 5:6 */ #define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ +/*********************** McBSP XCCR bit definitions *************************/ +#define DILB 0x0020 +#define XDMAEN 0x0008 +#define XDISABLE 0x0001 + +/********************** McBSP RCCR bit definitions *************************/ +#define RDMAEN 0x0008 +#define RDISABLE 0x0001 + +/********************** McBSP SYSCONFIG bit definitions ********************/ +#define SOFTRST 0x0002 /* we don't do multichannel for now */ struct omap_mcbsp_reg_cfg { @@ -260,6 +273,8 @@ typedef enum { OMAP_MCBSP1 = 0, OMAP_MCBSP2, OMAP_MCBSP3, + OMAP_MCBSP4, + OMAP_MCBSP5 } omap_mcbsp_id; typedef int __bitwise omap_mcbsp_io_type_t; @@ -311,12 +326,10 @@ struct omap_mcbsp_spi_cfg { struct omap_mcbsp_ops { void (*request)(unsigned int); void (*free)(unsigned int); - int (*check)(unsigned int); }; struct omap_mcbsp_platform_data { unsigned long phys_base; - u32 virt_base; u8 dma_rx_sync, dma_tx_sync; u16 rx_irq, tx_irq; struct omap_mcbsp_ops *ops; @@ -326,7 +339,7 @@ struct omap_mcbsp_platform_data { struct omap_mcbsp { struct device *dev; unsigned long phys_base; - u32 io_base; + void __iomem *io_base; u8 id; u8 free; omap_mcbsp_word_length rx_word_length; @@ -354,6 +367,8 @@ struct omap_mcbsp { struct omap_mcbsp_platform_data *pdata; struct clk *clk; }; +extern struct omap_mcbsp **mcbsp_ptr; +extern int omap_mcbsp_count; int omap_mcbsp_init(void); void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, @@ -378,5 +393,6 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * /* Polled read/write functions */ int omap_mcbsp_pollread(unsigned int id, u16 * buf); int omap_mcbsp_pollwrite(unsigned int id, u16 buf); +int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type); #endif diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h index a325caf80d0..d40cac60b95 100644 --- a/arch/arm/plat-omap/include/mach/memory.h +++ b/arch/arm/plat-omap/include/mach/memory.h @@ -38,7 +38,7 @@ */ #if defined(CONFIG_ARCH_OMAP1) #define PHYS_OFFSET UL(0x10000000) -#elif defined(CONFIG_ARCH_OMAP2) +#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) #define PHYS_OFFSET UL(0x80000000) #endif diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h index 5cee7e16a1b..39b591ff54b 100644 --- a/arch/arm/plat-omap/include/mach/mtd-xip.h +++ b/arch/arm/plat-omap/include/mach/mtd-xip.h @@ -3,7 +3,7 @@ * * Do not include this file directly. It's included from linux/mtd/xip.h * - * Author: Vladimir Barinov <vbarinov@ru.mvista.com> + * Author: Vladimir Barinov <vbarinov@embeddedalley.com> * * (c) 2005 MontaVista Software, Inc. This file is licensed under the * terms of the GNU General Public License version 2. This program is diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 614b2c1327c..6bbf1789bed 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -125,20 +125,64 @@ .pu_pd_val = pull_mode, \ }, - -#define PULL_DISABLED 0 -#define PULL_ENABLED 1 - -#define PULL_DOWN 0 -#define PULL_UP 1 +/* 24xx/34xx mux bit defines */ +#define OMAP2_PULL_ENA (1 << 3) +#define OMAP2_PULL_UP (1 << 4) +#define OMAP2_ALTELECTRICALSEL (1 << 5) + +/* 34xx specific mux bit defines */ +#define OMAP3_INPUT_EN (1 << 8) +#define OMAP3_OFF_EN (1 << 9) +#define OMAP3_OFFOUT_EN (1 << 10) +#define OMAP3_OFFOUT_VAL (1 << 11) +#define OMAP3_OFF_PULL_EN (1 << 12) +#define OMAP3_OFF_PULL_UP (1 << 13) +#define OMAP3_WAKEUP_EN (1 << 14) + +/* 34xx mux mode options for each pin. See TRM for options */ +#define OMAP34XX_MUX_MODE0 0 +#define OMAP34XX_MUX_MODE1 1 +#define OMAP34XX_MUX_MODE2 2 +#define OMAP34XX_MUX_MODE3 3 +#define OMAP34XX_MUX_MODE4 4 +#define OMAP34XX_MUX_MODE5 5 +#define OMAP34XX_MUX_MODE6 6 +#define OMAP34XX_MUX_MODE7 7 + +/* 34xx active pin states */ +#define OMAP34XX_PIN_OUTPUT 0 +#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN +#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \ + | OMAP2_PULL_UP) +#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN) + +/* 34xx off mode states */ +#define OMAP34XX_PIN_OFF_NONE 0 +#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \ + | OMAP3_OFFOUT_VAL) +#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN) +#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \ + | OMAP3_OFF_PULL_UP) +#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN) +#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN + +#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \ + .name = desc, \ + .debug = 0, \ + .mux_reg = reg_offset, \ + .mux_val = mux_value \ +}, struct pin_config { - char *name; - unsigned char busy; - unsigned char debug; + char *name; + const unsigned int mux_reg; + unsigned char debug; - const char *mux_reg_name; - const unsigned int mux_reg; +#if defined(CONFIG_ARCH_OMAP34XX) + u16 mux_val; /* Wake-up, off mode, pull, mux mode */ +#endif + +#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX) const unsigned char mask_offset; const unsigned char mask; @@ -150,6 +194,12 @@ struct pin_config { const char *pu_pd_name; const unsigned int pu_pd_reg; const unsigned char pu_pd_val; +#endif + +#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) + const char *mux_reg_name; +#endif + }; enum omap730_index { @@ -593,6 +643,114 @@ enum omap24xx_index { }; +enum omap34xx_index { + /* 34xx I2C */ + K21_34XX_I2C1_SCL, + J21_34XX_I2C1_SDA, + AF15_34XX_I2C2_SCL, + AE15_34XX_I2C2_SDA, + AF14_34XX_I2C3_SCL, + AG14_34XX_I2C3_SDA, + AD26_34XX_I2C4_SCL, + AE26_34XX_I2C4_SDA, + + /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ + Y8_3430_USB1HS_PHY_CLK, + Y9_3430_USB1HS_PHY_STP, + AA14_3430_USB1HS_PHY_DIR, + AA11_3430_USB1HS_PHY_NXT, + W13_3430_USB1HS_PHY_DATA0, + W12_3430_USB1HS_PHY_DATA1, + W11_3430_USB1HS_PHY_DATA2, + Y11_3430_USB1HS_PHY_DATA3, + W9_3430_USB1HS_PHY_DATA4, + Y12_3430_USB1HS_PHY_DATA5, + W8_3430_USB1HS_PHY_DATA6, + Y13_3430_USB1HS_PHY_DATA7, + + /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ + AA8_3430_USB2HS_PHY_CLK, + AA10_3430_USB2HS_PHY_STP, + AA9_3430_USB2HS_PHY_DIR, + AB11_3430_USB2HS_PHY_NXT, + AB10_3430_USB2HS_PHY_DATA0, + AB9_3430_USB2HS_PHY_DATA1, + W3_3430_USB2HS_PHY_DATA2, + T4_3430_USB2HS_PHY_DATA3, + T3_3430_USB2HS_PHY_DATA4, + R3_3430_USB2HS_PHY_DATA5, + R4_3430_USB2HS_PHY_DATA6, + T2_3430_USB2HS_PHY_DATA7, + + + /* TLL - HSUSB: 12-pin TLL Port 1*/ + Y8_3430_USB1HS_TLL_CLK, + Y9_3430_USB1HS_TLL_STP, + AA14_3430_USB1HS_TLL_DIR, + AA11_3430_USB1HS_TLL_NXT, + W13_3430_USB1HS_TLL_DATA0, + W12_3430_USB1HS_TLL_DATA1, + W11_3430_USB1HS_TLL_DATA2, + Y11_3430_USB1HS_TLL_DATA3, + W9_3430_USB1HS_TLL_DATA4, + Y12_3430_USB1HS_TLL_DATA5, + W8_3430_USB1HS_TLL_DATA6, + Y13_3430_USB1HS_TLL_DATA7, + + /* TLL - HSUSB: 12-pin TLL Port 2*/ + AA8_3430_USB2HS_TLL_CLK, + AA10_3430_USB2HS_TLL_STP, + AA9_3430_USB2HS_TLL_DIR, + AB11_3430_USB2HS_TLL_NXT, + AB10_3430_USB2HS_TLL_DATA0, + AB9_3430_USB2HS_TLL_DATA1, + W3_3430_USB2HS_TLL_DATA2, + T4_3430_USB2HS_TLL_DATA3, + T3_3430_USB2HS_TLL_DATA4, + R3_3430_USB2HS_TLL_DATA5, + R4_3430_USB2HS_TLL_DATA6, + T2_3430_USB2HS_TLL_DATA7, + + /* TLL - HSUSB: 12-pin TLL Port 3*/ + AA6_3430_USB3HS_TLL_CLK, + AB3_3430_USB3HS_TLL_STP, + AA3_3430_USB3HS_TLL_DIR, + Y3_3430_USB3HS_TLL_NXT, + AA5_3430_USB3HS_TLL_DATA0, + Y4_3430_USB3HS_TLL_DATA1, + Y5_3430_USB3HS_TLL_DATA2, + W5_3430_USB3HS_TLL_DATA3, + AB12_3430_USB3HS_TLL_DATA4, + AB13_3430_USB3HS_TLL_DATA5, + AA13_3430_USB3HS_TLL_DATA6, + AA12_3430_USB3HS_TLL_DATA7, + + /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ + AF10_3430_USB1FS_PHY_MM1_RXDP, + AG9_3430_USB1FS_PHY_MM1_RXDM, + W13_3430_USB1FS_PHY_MM1_RXRCV, + W12_3430_USB1FS_PHY_MM1_TXSE0, + W11_3430_USB1FS_PHY_MM1_TXDAT, + Y11_3430_USB1FS_PHY_MM1_TXEN_N, + + /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ + AF7_3430_USB2FS_PHY_MM2_RXDP, + AH7_3430_USB2FS_PHY_MM2_RXDM, + AB10_3430_USB2FS_PHY_MM2_RXRCV, + AB9_3430_USB2FS_PHY_MM2_TXSE0, + W3_3430_USB2FS_PHY_MM2_TXDAT, + T4_3430_USB2FS_PHY_MM2_TXEN_N, + + /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ + AH3_3430_USB3FS_PHY_MM3_RXDP, + AE3_3430_USB3FS_PHY_MM3_RXDM, + AD1_3430_USB3FS_PHY_MM3_RXRCV, + AE1_3430_USB3FS_PHY_MM3_TXSE0, + AD2_3430_USB3FS_PHY_MM3_TXDAT, + AC1_3430_USB3FS_PHY_MM3_TXEN_N, + +}; + struct omap_mux_cfg { struct pin_config *pins; unsigned long size; diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h index 505a38af8b2..d2400466813 100644 --- a/arch/arm/plat-omap/include/mach/omap1510.h +++ b/arch/arm/plat-omap/include/mach/omap1510.h @@ -44,5 +44,7 @@ #define OMAP1510_DSPREG_SIZE SZ_128K #define OMAP1510_DSPREG_START 0xE1000000 +#define OMAP1510_DSP_MMU_BASE (0xfffed200) + #endif /* __ASM_ARCH_OMAP15XX_H */ diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h index c6c93afb278..0e69b504c25 100644 --- a/arch/arm/plat-omap/include/mach/omap16xx.h +++ b/arch/arm/plat-omap/include/mach/omap16xx.h @@ -44,6 +44,11 @@ #define OMAP16XX_DSPREG_SIZE SZ_128K #define OMAP16XX_DSPREG_START 0xE1000000 +#define OMAP16XX_SEC_BASE 0xFFFE4000 +#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000) +#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800) +#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000) + /* * --------------------------------------------------------------------------- * Interrupts @@ -190,7 +195,7 @@ #define WSPR_DISABLE_0 (0x0000aaaa) #define WSPR_DISABLE_1 (0x00005555) -/* Mailbox */ +#define OMAP16XX_DSP_MMU_BASE (0xfffed200) #define OMAP16XX_MAILBOX_BASE (0xfffcf000) #endif /* __ASM_ARCH_OMAP16XX_H */ diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h index bb8319d66e9..24335d4932f 100644 --- a/arch/arm/plat-omap/include/mach/omap24xx.h +++ b/arch/arm/plat-omap/include/mach/omap24xx.h @@ -39,7 +39,6 @@ /* interrupt controller */ #define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) #define OMAP24XX_IVA_INTC_BASE 0x40000000 -#define IRQ_SIR_IRQ 0x0040 #define OMAP2420_CTRL_BASE L4_24XX_BASE #define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) @@ -48,6 +47,7 @@ #define OMAP2420_PRM_BASE OMAP2420_CM_BASE #define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000) #define OMAP2420_SMS_BASE 0x68008000 +#define OMAP2420_GPMC_BASE 0x6800a000 #define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) #define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000) diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h index cae037d1307..ec67fb42860 100644 --- a/arch/arm/plat-omap/include/mach/omapfb.h +++ b/arch/arm/plat-omap/include/mach/omapfb.h @@ -62,6 +62,7 @@ #define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 #define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 #define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 +#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 #define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 /* Values from DSP must map to lower 16-bits */ @@ -305,6 +306,7 @@ struct lcd_ctrl { int screen_width, int pos_x, int pos_y, int width, int height, int color_mode); + int (*set_rotate) (int angle); int (*setup_mem) (int plane, size_t size, int mem_type, unsigned long *paddr); int (*mmap) (struct fb_info *info, @@ -374,6 +376,7 @@ extern struct lcd_ctrl omap1_lcd_ctrl; extern struct lcd_ctrl omap2_disp_ctrl; #endif +extern void omapfb_reserve_sdram(void); extern void omapfb_register_panel(struct lcd_panel *panel); extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); extern void omapfb_notify_clients(struct omapfb_device *fbdev, diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h index bfa09325a5f..768eb6e7abc 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/plat-omap/include/mach/pm.h @@ -39,11 +39,11 @@ * Register and offset definitions to be used in PM assembler code * ---------------------------------------------------------------------------- */ -#define CLKGEN_REG_ASM_BASE io_p2v(0xfffece00) +#define CLKGEN_REG_ASM_BASE IO_ADDRESS(0xfffece00) #define ARM_IDLECT1_ASM_OFFSET 0x04 #define ARM_IDLECT2_ASM_OFFSET 0x08 -#define TCMIF_ASM_BASE io_p2v(0xfffecc00) +#define TCMIF_ASM_BASE IO_ADDRESS(0xfffecc00) #define EMIFS_CONFIG_ASM_OFFSET 0x0c #define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20 @@ -135,7 +135,8 @@ extern void omap_pm_suspend(void); extern void omap730_cpu_suspend(unsigned short, unsigned short); extern void omap1510_cpu_suspend(unsigned short, unsigned short); extern void omap1610_cpu_suspend(unsigned short, unsigned short); -extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision); +extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, + void __iomem *sdrc_power); extern void omap730_idle_loop_suspend(void); extern void omap1510_idle_loop_suspend(void); extern void omap1610_idle_loop_suspend(void); diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h new file mode 100644 index 00000000000..2806a9c8e4d --- /dev/null +++ b/arch/arm/plat-omap/include/mach/powerdomain.h @@ -0,0 +1,166 @@ +/* + * OMAP2/3 powerdomain control + * + * Copyright (C) 2007-8 Texas Instruments, Inc. + * Copyright (C) 2007-8 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ASM_ARM_ARCH_OMAP_POWERDOMAIN +#define ASM_ARM_ARCH_OMAP_POWERDOMAIN + +#include <linux/types.h> +#include <linux/list.h> + +#include <asm/atomic.h> + +#include <mach/cpu.h> + + +/* Powerdomain basic power states */ +#define PWRDM_POWER_OFF 0x0 +#define PWRDM_POWER_RET 0x1 +#define PWRDM_POWER_INACTIVE 0x2 +#define PWRDM_POWER_ON 0x3 + +/* Powerdomain allowable state bitfields */ +#define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \ + (1 << PWRDM_POWER_ON)) + +#define PWRSTS_OFF_RET ((1 << PWRDM_POWER_OFF) | \ + (1 << PWRDM_POWER_RET)) + +#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON)) + + +/* Powerdomain flags */ +#define PWRDM_HAS_HDWR_SAR (1 << 0) /* hardware save-and-restore support */ + + +/* + * Number of memory banks that are power-controllable. On OMAP3430, the + * maximum is 4. + */ +#define PWRDM_MAX_MEM_BANKS 4 + +/* + * Maximum number of clockdomains that can be associated with a powerdomain. + * CORE powerdomain is probably the worst case. + */ +#define PWRDM_MAX_CLKDMS 3 + +/* XXX A completely arbitrary number. What is reasonable here? */ +#define PWRDM_TRANSITION_BAILOUT 100000 + +struct clockdomain; +struct powerdomain; + +/* Encodes dependencies between powerdomains - statically defined */ +struct pwrdm_dep { + + /* Powerdomain name */ + const char *pwrdm_name; + + /* Powerdomain pointer - resolved by the powerdomain code */ + struct powerdomain *pwrdm; + + /* Flags to mark OMAP chip restrictions, etc. */ + const struct omap_chip_id omap_chip; + +}; + +struct powerdomain { + + /* Powerdomain name */ + const char *name; + + /* the address offset from CM_BASE/PRM_BASE */ + const s16 prcm_offs; + + /* Used to represent the OMAP chip types containing this pwrdm */ + const struct omap_chip_id omap_chip; + + /* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */ + const u8 dep_bit; + + /* Powerdomains that can be told to wake this powerdomain up */ + struct pwrdm_dep *wkdep_srcs; + + /* Powerdomains that can be told to keep this pwrdm from inactivity */ + struct pwrdm_dep *sleepdep_srcs; + + /* Possible powerdomain power states */ + const u8 pwrsts; + + /* Possible logic power states when pwrdm in RETENTION */ + const u8 pwrsts_logic_ret; + + /* Powerdomain flags */ + const u8 flags; + + /* Number of software-controllable memory banks in this powerdomain */ + const u8 banks; + + /* Possible memory bank pwrstates when pwrdm in RETENTION */ + const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS]; + + /* Possible memory bank pwrstates when pwrdm is ON */ + const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS]; + + /* Clockdomains in this powerdomain */ + struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS]; + + struct list_head node; + +}; + + +void pwrdm_init(struct powerdomain **pwrdm_list); + +int pwrdm_register(struct powerdomain *pwrdm); +int pwrdm_unregister(struct powerdomain *pwrdm); +struct powerdomain *pwrdm_lookup(const char *name); + +int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm)); + +int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); +int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); +int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, + int (*fn)(struct powerdomain *pwrdm, + struct clockdomain *clkdm)); + +int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); + +int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm); + +int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst); +int pwrdm_read_next_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm); +int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm); + +int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst); +int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst); +int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst); + +int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank); +int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank); + +int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm); +int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm); +bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm); + +int pwrdm_wait_transition(struct powerdomain *pwrdm); + +#endif diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index 787b7acec54..a98c6c3beb2 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -25,6 +25,8 @@ #define SDRC_DLLB_STATUS 0x06C #define SDRC_POWER 0x070 #define SDRC_MR_0 0x084 +#define SDRC_ACTIM_CTRL_A_0 0x09c +#define SDRC_ACTIM_CTRL_B_0 0x0a0 #define SDRC_RFR_CTRL_0 0x0a4 /* @@ -63,9 +65,9 @@ */ -#define OMAP242X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg) -#define OMAP243X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg) -#define OMAP343X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg) +#define OMAP242X_SMS_REGADDR(reg) IO_ADDRESS(OMAP2420_SMS_BASE + reg) +#define OMAP243X_SMS_REGADDR(reg) IO_ADDRESS(OMAP243X_SMS_BASE + reg) +#define OMAP343X_SMS_REGADDR(reg) IO_ADDRESS(OMAP343X_SMS_BASE + reg) /* SMS register offsets - read/write with sms_{read,write}_reg() */ diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h index cc6bfa51ccb..8a676a04be4 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/mach/serial.h @@ -20,18 +20,24 @@ #define OMAP_UART1_BASE 0x4806a000 #define OMAP_UART2_BASE 0x4806c000 #define OMAP_UART3_BASE 0x4806e000 +#elif defined(CONFIG_ARCH_OMAP3) +/* OMAP3 serial ports */ +#define OMAP_UART1_BASE 0x4806a000 +#define OMAP_UART2_BASE 0x4806c000 +#define OMAP_UART3_BASE 0x49020000 #endif #define OMAP_MAX_NR_PORTS 3 #define OMAP1510_BASE_BAUD (12000000/16) #define OMAP16XX_BASE_BAUD (48000000/16) +#define OMAP24XX_BASE_BAUD (48000000/16) -#define is_omap_port(p) ({int __ret = 0; \ - if (p == IO_ADDRESS(OMAP_UART1_BASE) || \ - p == IO_ADDRESS(OMAP_UART2_BASE) || \ - p == IO_ADDRESS(OMAP_UART3_BASE)) \ - __ret = 1; \ - __ret; \ +#define is_omap_port(pt) ({int __ret = 0; \ + if ((pt)->port.mapbase == OMAP_UART1_BASE || \ + (pt)->port.mapbase == OMAP_UART2_BASE || \ + (pt)->port.mapbase == OMAP_UART3_BASE) \ + __ret = 1; \ + __ret; \ }) #endif diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index e0932344998..ab35d622dcf 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -21,6 +21,10 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); +extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, + u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, u32 m2); + /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); extern unsigned long omap1_sram_reprogram_clock_sz; @@ -53,4 +57,10 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern unsigned long omap243x_sram_reprogram_sdrc_sz; + +extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, + u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, u32 m2); +extern unsigned long omap3_sram_configure_core_dpll_sz; + #endif diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h index 06a28c7b98d..06923f26154 100644 --- a/arch/arm/plat-omap/include/mach/system.h +++ b/arch/arm/plat-omap/include/mach/system.h @@ -40,7 +40,7 @@ static inline void omap1_arch_reset(char mode) static inline void arch_reset(char mode) { - if (!cpu_is_omap24xx()) + if (!cpu_class_is_omap2()) omap1_arch_reset(mode); else omap_prcm_arch_reset(mode); diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c new file mode 100644 index 00000000000..af326efc1ad --- /dev/null +++ b/arch/arm/plat-omap/io.c @@ -0,0 +1,107 @@ +#include <linux/module.h> +#include <linux/io.h> +#include <linux/mm.h> + +#include <mach/omap730.h> +#include <mach/omap1510.h> +#include <mach/omap16xx.h> +#include <mach/omap24xx.h> +#include <mach/omap34xx.h> + +#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz))) +#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst))) + +/* + * Intercept ioremap() requests for addresses in our fixed mapping regions. + */ +void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) +{ +#ifdef CONFIG_ARCH_OMAP1 + if (cpu_class_is_omap1()) { + if (BETWEEN(p, IO_PHYS, IO_SIZE)) + return XLATE(p, IO_PHYS, IO_VIRT); + } + if (cpu_is_omap730()) { + if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE)) + return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START); + + if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE)) + return XLATE(p, OMAP730_DSPREG_BASE, + OMAP730_DSPREG_START); + } + if (cpu_is_omap15xx()) { + if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE)) + return XLATE(p, OMAP1510_DSP_BASE, OMAP1510_DSP_START); + + if (BETWEEN(p, OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_SIZE)) + return XLATE(p, OMAP1510_DSPREG_BASE, + OMAP1510_DSPREG_START); + } + if (cpu_is_omap16xx()) { + if (BETWEEN(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_SIZE)) + return XLATE(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_START); + + if (BETWEEN(p, OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_SIZE)) + return XLATE(p, OMAP16XX_DSPREG_BASE, + OMAP16XX_DSPREG_START); + } +#endif +#ifdef CONFIG_ARCH_OMAP2 + if (cpu_is_omap24xx()) { + if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE)) + return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT); + if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE)) + return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT); + } + if (cpu_is_omap2420()) { + if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE)) + return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT); + if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE)) + return XLATE(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE); + if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE)) + return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT); + } + if (cpu_is_omap2430()) { + if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE)) + return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT); + if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE)) + return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT); + if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE)) + return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT); + if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE)) + return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT); + } +#endif +#ifdef CONFIG_ARCH_OMAP3 + if (cpu_is_omap34xx()) { + if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE)) + return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT); + if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE)) + return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT); + if (BETWEEN(p, L4_WK_34XX_PHYS, L4_WK_34XX_SIZE)) + return XLATE(p, L4_WK_34XX_PHYS, L4_WK_34XX_VIRT); + if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE)) + return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT); + if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE)) + return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT); + if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE)) + return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT); + if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE)) + return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT); + if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE)) + return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT); + } +#endif + + return __arm_ioremap(p, size, type); +} +EXPORT_SYMBOL(omap_ioremap); + +void omap_iounmap(volatile void __iomem *addr) +{ + unsigned long virt = (unsigned long)addr; + + if (virt >= VMALLOC_START && virt < VMALLOC_END) + __iounmap(addr); +} +EXPORT_SYMBOL(omap_iounmap); diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 1d7aec1a691..b52ce053e6f 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -30,7 +30,7 @@ #include <linux/blkdev.h> #include <linux/err.h> #include <linux/delay.h> -#include <asm/io.h> +#include <linux/io.h> #include <mach/mailbox.h> #include "mailbox.h" diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 014d26574bb..af33fc713e1 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -27,43 +27,65 @@ #include <mach/dma.h> #include <mach/mcbsp.h> -static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT]; +struct omap_mcbsp **mcbsp_ptr; +int omap_mcbsp_count; -#define omap_mcbsp_check_valid_id(id) (mcbsp[id].pdata && \ - mcbsp[id].pdata->ops && \ - mcbsp[id].pdata->ops->check && \ - (mcbsp[id].pdata->ops->check(id) == 0)) +void omap_mcbsp_write(void __iomem *io_base, u16 reg, u32 val) +{ + if (cpu_class_is_omap1() || cpu_is_omap2420()) + __raw_writew((u16)val, io_base + reg); + else + __raw_writel(val, io_base + reg); +} + +int omap_mcbsp_read(void __iomem *io_base, u16 reg) +{ + if (cpu_class_is_omap1() || cpu_is_omap2420()) + return __raw_readw(io_base + reg); + else + return __raw_readl(io_base + reg); +} + +#define OMAP_MCBSP_READ(base, reg) \ + omap_mcbsp_read(base, OMAP_MCBSP_REG_##reg) +#define OMAP_MCBSP_WRITE(base, reg, val) \ + omap_mcbsp_write(base, OMAP_MCBSP_REG_##reg, val) + +#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) +#define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; static void omap_mcbsp_dump_reg(u8 id) { - dev_dbg(mcbsp[id].dev, "**** McBSP%d regs ****\n", mcbsp[id].id); - dev_dbg(mcbsp[id].dev, "DRR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2)); - dev_dbg(mcbsp[id].dev, "DRR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1)); - dev_dbg(mcbsp[id].dev, "DXR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2)); - dev_dbg(mcbsp[id].dev, "DXR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1)); - dev_dbg(mcbsp[id].dev, "SPCR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2)); - dev_dbg(mcbsp[id].dev, "SPCR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1)); - dev_dbg(mcbsp[id].dev, "RCR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2)); - dev_dbg(mcbsp[id].dev, "RCR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1)); - dev_dbg(mcbsp[id].dev, "XCR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2)); - dev_dbg(mcbsp[id].dev, "XCR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1)); - dev_dbg(mcbsp[id].dev, "SRGR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2)); - dev_dbg(mcbsp[id].dev, "SRGR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1)); - dev_dbg(mcbsp[id].dev, "PCR0: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0)); - dev_dbg(mcbsp[id].dev, "***********************\n"); + struct omap_mcbsp *mcbsp = id_to_mcbsp_ptr(id); + + dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id); + dev_dbg(mcbsp->dev, "DRR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, DRR2)); + dev_dbg(mcbsp->dev, "DRR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, DRR1)); + dev_dbg(mcbsp->dev, "DXR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, DXR2)); + dev_dbg(mcbsp->dev, "DXR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, DXR1)); + dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, SPCR2)); + dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, SPCR1)); + dev_dbg(mcbsp->dev, "RCR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, RCR2)); + dev_dbg(mcbsp->dev, "RCR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, RCR1)); + dev_dbg(mcbsp->dev, "XCR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, XCR2)); + dev_dbg(mcbsp->dev, "XCR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, XCR1)); + dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, SRGR2)); + dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, SRGR1)); + dev_dbg(mcbsp->dev, "PCR0: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, PCR0)); + dev_dbg(mcbsp->dev, "***********************\n"); } static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) @@ -126,16 +148,18 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data) */ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) { - u32 io_base; + struct omap_mcbsp *mcbsp; + void __iomem *io_base; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } + mcbsp = id_to_mcbsp_ptr(id); - io_base = mcbsp[id].io_base; - dev_dbg(mcbsp[id].dev, "Configuring McBSP%d io_base: 0x%8x\n", - mcbsp[id].id, io_base); + io_base = mcbsp->io_base; + dev_dbg(mcbsp->dev, "Configuring McBSP%d phys_base: 0x%08lx\n", + mcbsp->id, mcbsp->phys_base); /* We write the given config */ OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2); @@ -158,23 +182,26 @@ EXPORT_SYMBOL(omap_mcbsp_config); */ int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type) { + struct omap_mcbsp *mcbsp; + if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - spin_lock(&mcbsp[id].lock); + spin_lock(&mcbsp->lock); - if (!mcbsp[id].free) { - dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n", - mcbsp[id].id); - spin_unlock(&mcbsp[id].lock); + if (!mcbsp->free) { + dev_err(mcbsp->dev, "McBSP%d is currently in use\n", + mcbsp->id); + spin_unlock(&mcbsp->lock); return -EINVAL; } - mcbsp[id].io_type = io_type; + mcbsp->io_type = io_type; - spin_unlock(&mcbsp[id].lock); + spin_unlock(&mcbsp->lock); return 0; } @@ -182,53 +209,60 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type); int omap_mcbsp_request(unsigned int id) { + struct omap_mcbsp *mcbsp; int err; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp[id].pdata->ops->request) - mcbsp[id].pdata->ops->request(id); + if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) + mcbsp->pdata->ops->request(id); - clk_enable(mcbsp[id].clk); + clk_enable(mcbsp->clk); - spin_lock(&mcbsp[id].lock); - if (!mcbsp[id].free) { - dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n", - mcbsp[id].id); - spin_unlock(&mcbsp[id].lock); + spin_lock(&mcbsp->lock); + if (!mcbsp->free) { + dev_err(mcbsp->dev, "McBSP%d is currently in use\n", + mcbsp->id); + spin_unlock(&mcbsp->lock); return -1; } - mcbsp[id].free = 0; - spin_unlock(&mcbsp[id].lock); + mcbsp->free = 0; + spin_unlock(&mcbsp->lock); + + /* + * Make sure that transmitter, receiver and sample-rate generator are + * not running before activating IRQs. + */ + OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR1, 0); + OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR2, 0); - if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) { + if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { /* We need to get IRQs here */ - err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler, - 0, "McBSP", (void *) (&mcbsp[id])); + init_completion(&mcbsp->tx_irq_completion); + err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, + 0, "McBSP", (void *)mcbsp); if (err != 0) { - dev_err(mcbsp[id].dev, "Unable to request TX IRQ %d " - "for McBSP%d\n", mcbsp[id].tx_irq, - mcbsp[id].id); + dev_err(mcbsp->dev, "Unable to request TX IRQ %d " + "for McBSP%d\n", mcbsp->tx_irq, + mcbsp->id); return err; } - init_completion(&(mcbsp[id].tx_irq_completion)); - - err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler, - 0, "McBSP", (void *) (&mcbsp[id])); + init_completion(&mcbsp->rx_irq_completion); + err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler, + 0, "McBSP", (void *)mcbsp); if (err != 0) { - dev_err(mcbsp[id].dev, "Unable to request RX IRQ %d " - "for McBSP%d\n", mcbsp[id].rx_irq, - mcbsp[id].id); - free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id])); + dev_err(mcbsp->dev, "Unable to request RX IRQ %d " + "for McBSP%d\n", mcbsp->rx_irq, + mcbsp->id); + free_irq(mcbsp->tx_irq, (void *)mcbsp); return err; } - - init_completion(&(mcbsp[id].rx_irq_completion)); } return 0; @@ -237,31 +271,34 @@ EXPORT_SYMBOL(omap_mcbsp_request); void omap_mcbsp_free(unsigned int id) { + struct omap_mcbsp *mcbsp; + if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } + mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp[id].pdata->ops->free) - mcbsp[id].pdata->ops->free(id); + if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) + mcbsp->pdata->ops->free(id); - clk_disable(mcbsp[id].clk); + clk_disable(mcbsp->clk); - spin_lock(&mcbsp[id].lock); - if (mcbsp[id].free) { - dev_err(mcbsp[id].dev, "McBSP%d was not reserved\n", - mcbsp[id].id); - spin_unlock(&mcbsp[id].lock); + spin_lock(&mcbsp->lock); + if (mcbsp->free) { + dev_err(mcbsp->dev, "McBSP%d was not reserved\n", + mcbsp->id); + spin_unlock(&mcbsp->lock); return; } - mcbsp[id].free = 1; - spin_unlock(&mcbsp[id].lock); + mcbsp->free = 1; + spin_unlock(&mcbsp->lock); - if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) { + if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { /* Free IRQs */ - free_irq(mcbsp[id].rx_irq, (void *) (&mcbsp[id])); - free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id])); + free_irq(mcbsp->rx_irq, (void *)mcbsp); + free_irq(mcbsp->tx_irq, (void *)mcbsp); } } EXPORT_SYMBOL(omap_mcbsp_free); @@ -273,18 +310,19 @@ EXPORT_SYMBOL(omap_mcbsp_free); */ void omap_mcbsp_start(unsigned int id) { - u32 io_base; + struct omap_mcbsp *mcbsp; + void __iomem *io_base; u16 w; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; - io_base = mcbsp[id].io_base; - - mcbsp[id].rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7; - mcbsp[id].tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7; + mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7; + mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7; /* Start the sample generator */ w = OMAP_MCBSP_READ(io_base, SPCR2); @@ -310,7 +348,8 @@ EXPORT_SYMBOL(omap_mcbsp_start); void omap_mcbsp_stop(unsigned int id) { - u32 io_base; + struct omap_mcbsp *mcbsp; + void __iomem *io_base; u16 w; if (!omap_mcbsp_check_valid_id(id)) { @@ -318,7 +357,8 @@ void omap_mcbsp_stop(unsigned int id) return; } - io_base = mcbsp[id].io_base; + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; /* Reset transmitter */ w = OMAP_MCBSP_READ(io_base, SPCR2); @@ -337,14 +377,17 @@ EXPORT_SYMBOL(omap_mcbsp_stop); /* polled mcbsp i/o operations */ int omap_mcbsp_pollwrite(unsigned int id, u16 buf) { - u32 base; + struct omap_mcbsp *mcbsp; + void __iomem *base; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } - base = mcbsp[id].io_base; + mcbsp = id_to_mcbsp_ptr(id); + base = mcbsp->io_base; + writew(buf, base + OMAP_MCBSP_REG_DXR1); /* if frame sync error - clear the error */ if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) { @@ -366,8 +409,8 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf) (XRST), base + OMAP_MCBSP_REG_SPCR2); udelay(10); - dev_err(mcbsp[id].dev, "Could not write to" - " McBSP%d Register\n", mcbsp[id].id); + dev_err(mcbsp->dev, "Could not write to" + " McBSP%d Register\n", mcbsp->id); return -2; } } @@ -379,14 +422,16 @@ EXPORT_SYMBOL(omap_mcbsp_pollwrite); int omap_mcbsp_pollread(unsigned int id, u16 *buf) { - u32 base; + struct omap_mcbsp *mcbsp; + void __iomem *base; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - base = mcbsp[id].io_base; + base = mcbsp->io_base; /* if frame sync error - clear the error */ if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) { /* clear error */ @@ -407,8 +452,8 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf) (RRST), base + OMAP_MCBSP_REG_SPCR1); udelay(10); - dev_err(mcbsp[id].dev, "Could not read from" - " McBSP%d Register\n", mcbsp[id].id); + dev_err(mcbsp->dev, "Could not read from" + " McBSP%d Register\n", mcbsp->id); return -2; } } @@ -424,7 +469,8 @@ EXPORT_SYMBOL(omap_mcbsp_pollread); */ void omap_mcbsp_xmit_word(unsigned int id, u32 word) { - u32 io_base; + struct omap_mcbsp *mcbsp; + void __iomem *io_base; omap_mcbsp_word_length word_length; if (!omap_mcbsp_check_valid_id(id)) { @@ -432,10 +478,11 @@ void omap_mcbsp_xmit_word(unsigned int id, u32 word) return; } - io_base = mcbsp[id].io_base; - word_length = mcbsp[id].tx_word_length; + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + word_length = mcbsp->tx_word_length; - wait_for_completion(&(mcbsp[id].tx_irq_completion)); + wait_for_completion(&mcbsp->tx_irq_completion); if (word_length > OMAP_MCBSP_WORD_16) OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16); @@ -445,7 +492,8 @@ EXPORT_SYMBOL(omap_mcbsp_xmit_word); u32 omap_mcbsp_recv_word(unsigned int id) { - u32 io_base; + struct omap_mcbsp *mcbsp; + void __iomem *io_base; u16 word_lsb, word_msb = 0; omap_mcbsp_word_length word_length; @@ -453,11 +501,12 @@ u32 omap_mcbsp_recv_word(unsigned int id) printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - word_length = mcbsp[id].rx_word_length; - io_base = mcbsp[id].io_base; + word_length = mcbsp->rx_word_length; + io_base = mcbsp->io_base; - wait_for_completion(&(mcbsp[id].rx_irq_completion)); + wait_for_completion(&mcbsp->rx_irq_completion); if (word_length > OMAP_MCBSP_WORD_16) word_msb = OMAP_MCBSP_READ(io_base, DRR2); @@ -469,7 +518,8 @@ EXPORT_SYMBOL(omap_mcbsp_recv_word); int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) { - u32 io_base; + struct omap_mcbsp *mcbsp; + void __iomem *io_base; omap_mcbsp_word_length tx_word_length; omap_mcbsp_word_length rx_word_length; u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; @@ -478,10 +528,10 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } - - io_base = mcbsp[id].io_base; - tx_word_length = mcbsp[id].tx_word_length; - rx_word_length = mcbsp[id].rx_word_length; + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + tx_word_length = mcbsp->tx_word_length; + rx_word_length = mcbsp->rx_word_length; if (tx_word_length != rx_word_length) return -EINVAL; @@ -496,8 +546,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) udelay(10); OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST); udelay(10); - dev_err(mcbsp[id].dev, "McBSP%d transmitter not " - "ready\n", mcbsp[id].id); + dev_err(mcbsp->dev, "McBSP%d transmitter not " + "ready\n", mcbsp->id); return -EAGAIN; } } @@ -517,8 +567,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) udelay(10); OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST); udelay(10); - dev_err(mcbsp[id].dev, "McBSP%d receiver not " - "ready\n", mcbsp[id].id); + dev_err(mcbsp->dev, "McBSP%d receiver not " + "ready\n", mcbsp->id); return -EAGAIN; } } @@ -534,7 +584,9 @@ EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll); int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) { - u32 io_base, clock_word = 0; + struct omap_mcbsp *mcbsp; + u32 clock_word = 0; + void __iomem *io_base; omap_mcbsp_word_length tx_word_length; omap_mcbsp_word_length rx_word_length; u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; @@ -544,9 +596,11 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) return -ENODEV; } - io_base = mcbsp[id].io_base; - tx_word_length = mcbsp[id].tx_word_length; - rx_word_length = mcbsp[id].rx_word_length; + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + + tx_word_length = mcbsp->tx_word_length; + rx_word_length = mcbsp->rx_word_length; if (tx_word_length != rx_word_length) return -EINVAL; @@ -561,8 +615,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) udelay(10); OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST); udelay(10); - dev_err(mcbsp[id].dev, "McBSP%d transmitter not " - "ready\n", mcbsp[id].id); + dev_err(mcbsp->dev, "McBSP%d transmitter not " + "ready\n", mcbsp->id); return -EAGAIN; } } @@ -582,8 +636,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) udelay(10); OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST); udelay(10); - dev_err(mcbsp[id].dev, "McBSP%d receiver not " - "ready\n", mcbsp[id].id); + dev_err(mcbsp->dev, "McBSP%d receiver not " + "ready\n", mcbsp->id); return -EAGAIN; } } @@ -609,6 +663,7 @@ EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll); int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length) { + struct omap_mcbsp *mcbsp; int dma_tx_ch; int src_port = 0; int dest_port = 0; @@ -618,50 +673,51 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX", + if (omap_request_dma(mcbsp->dma_tx_sync, "McBSP TX", omap_mcbsp_tx_dma_callback, - &mcbsp[id], + mcbsp, &dma_tx_ch)) { - dev_err(mcbsp[id].dev, " Unable to request DMA channel for " + dev_err(mcbsp->dev, " Unable to request DMA channel for " "McBSP%d TX. Trying IRQ based TX\n", - mcbsp[id].id); + mcbsp->id); return -EAGAIN; } - mcbsp[id].dma_tx_lch = dma_tx_ch; + mcbsp->dma_tx_lch = dma_tx_ch; - dev_err(mcbsp[id].dev, "McBSP%d TX DMA on channel %d\n", mcbsp[id].id, + dev_err(mcbsp->dev, "McBSP%d TX DMA on channel %d\n", mcbsp->id, dma_tx_ch); - init_completion(&(mcbsp[id].tx_dma_completion)); + init_completion(&mcbsp->tx_dma_completion); if (cpu_class_is_omap1()) { src_port = OMAP_DMA_PORT_TIPB; dest_port = OMAP_DMA_PORT_EMIFF; } if (cpu_class_is_omap2()) - sync_dev = mcbsp[id].dma_tx_sync; + sync_dev = mcbsp->dma_tx_sync; - omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch, + omap_set_dma_transfer_params(mcbsp->dma_tx_lch, OMAP_DMA_DATA_TYPE_S16, length >> 1, 1, OMAP_DMA_SYNC_ELEMENT, sync_dev, 0); - omap_set_dma_dest_params(mcbsp[id].dma_tx_lch, + omap_set_dma_dest_params(mcbsp->dma_tx_lch, src_port, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].phys_base + OMAP_MCBSP_REG_DXR1, + mcbsp->phys_base + OMAP_MCBSP_REG_DXR1, 0, 0); - omap_set_dma_src_params(mcbsp[id].dma_tx_lch, + omap_set_dma_src_params(mcbsp->dma_tx_lch, dest_port, OMAP_DMA_AMODE_POST_INC, buffer, 0, 0); - omap_start_dma(mcbsp[id].dma_tx_lch); - wait_for_completion(&(mcbsp[id].tx_dma_completion)); + omap_start_dma(mcbsp->dma_tx_lch); + wait_for_completion(&mcbsp->tx_dma_completion); return 0; } @@ -670,6 +726,7 @@ EXPORT_SYMBOL(omap_mcbsp_xmit_buffer); int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length) { + struct omap_mcbsp *mcbsp; int dma_rx_ch; int src_port = 0; int dest_port = 0; @@ -679,50 +736,51 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX", + if (omap_request_dma(mcbsp->dma_rx_sync, "McBSP RX", omap_mcbsp_rx_dma_callback, - &mcbsp[id], + mcbsp, &dma_rx_ch)) { - dev_err(mcbsp[id].dev, "Unable to request DMA channel for " + dev_err(mcbsp->dev, "Unable to request DMA channel for " "McBSP%d RX. Trying IRQ based RX\n", - mcbsp[id].id); + mcbsp->id); return -EAGAIN; } - mcbsp[id].dma_rx_lch = dma_rx_ch; + mcbsp->dma_rx_lch = dma_rx_ch; - dev_err(mcbsp[id].dev, "McBSP%d RX DMA on channel %d\n", mcbsp[id].id, + dev_err(mcbsp->dev, "McBSP%d RX DMA on channel %d\n", mcbsp->id, dma_rx_ch); - init_completion(&(mcbsp[id].rx_dma_completion)); + init_completion(&mcbsp->rx_dma_completion); if (cpu_class_is_omap1()) { src_port = OMAP_DMA_PORT_TIPB; dest_port = OMAP_DMA_PORT_EMIFF; } if (cpu_class_is_omap2()) - sync_dev = mcbsp[id].dma_rx_sync; + sync_dev = mcbsp->dma_rx_sync; - omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch, + omap_set_dma_transfer_params(mcbsp->dma_rx_lch, OMAP_DMA_DATA_TYPE_S16, length >> 1, 1, OMAP_DMA_SYNC_ELEMENT, sync_dev, 0); - omap_set_dma_src_params(mcbsp[id].dma_rx_lch, + omap_set_dma_src_params(mcbsp->dma_rx_lch, src_port, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].phys_base + OMAP_MCBSP_REG_DRR1, + mcbsp->phys_base + OMAP_MCBSP_REG_DRR1, 0, 0); - omap_set_dma_dest_params(mcbsp[id].dma_rx_lch, + omap_set_dma_dest_params(mcbsp->dma_rx_lch, dest_port, OMAP_DMA_AMODE_POST_INC, buffer, 0, 0); - omap_start_dma(mcbsp[id].dma_rx_lch); - wait_for_completion(&(mcbsp[id].rx_dma_completion)); + omap_start_dma(mcbsp->dma_rx_lch); + wait_for_completion(&mcbsp->rx_dma_completion); return 0; } @@ -737,12 +795,14 @@ EXPORT_SYMBOL(omap_mcbsp_recv_buffer); void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *spi_cfg) { + struct omap_mcbsp *mcbsp; struct omap_mcbsp_reg_cfg mcbsp_cfg; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } + mcbsp = id_to_mcbsp_ptr(id); memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg)); @@ -803,9 +863,10 @@ EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. * 730 has only 2 McBSP, and both of them are MPU peripherals. */ -static int __init omap_mcbsp_probe(struct platform_device *pdev) +static int __devinit omap_mcbsp_probe(struct platform_device *pdev) { struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data; + struct omap_mcbsp *mcbsp; int id = pdev->id - 1; int ret = 0; @@ -818,47 +879,63 @@ static int __init omap_mcbsp_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id); - if (id >= OMAP_MAX_MCBSP_COUNT) { + if (id >= omap_mcbsp_count) { dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id); ret = -EINVAL; goto exit; } - spin_lock_init(&mcbsp[id].lock); - mcbsp[id].id = id + 1; - mcbsp[id].free = 1; - mcbsp[id].dma_tx_lch = -1; - mcbsp[id].dma_rx_lch = -1; + mcbsp = kzalloc(sizeof(struct omap_mcbsp), GFP_KERNEL); + if (!mcbsp) { + ret = -ENOMEM; + goto exit; + } + mcbsp_ptr[id] = mcbsp; + + spin_lock_init(&mcbsp->lock); + mcbsp->id = id + 1; + mcbsp->free = 1; + mcbsp->dma_tx_lch = -1; + mcbsp->dma_rx_lch = -1; + + mcbsp->phys_base = pdata->phys_base; + mcbsp->io_base = ioremap(pdata->phys_base, SZ_4K); + if (!mcbsp->io_base) { + ret = -ENOMEM; + goto err_ioremap; + } - mcbsp[id].phys_base = pdata->phys_base; - mcbsp[id].io_base = pdata->virt_base; /* Default I/O is IRQ based */ - mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO; - mcbsp[id].tx_irq = pdata->tx_irq; - mcbsp[id].rx_irq = pdata->rx_irq; - mcbsp[id].dma_rx_sync = pdata->dma_rx_sync; - mcbsp[id].dma_tx_sync = pdata->dma_tx_sync; + mcbsp->io_type = OMAP_MCBSP_IRQ_IO; + mcbsp->tx_irq = pdata->tx_irq; + mcbsp->rx_irq = pdata->rx_irq; + mcbsp->dma_rx_sync = pdata->dma_rx_sync; + mcbsp->dma_tx_sync = pdata->dma_tx_sync; if (pdata->clk_name) - mcbsp[id].clk = clk_get(&pdev->dev, pdata->clk_name); - if (IS_ERR(mcbsp[id].clk)) { - mcbsp[id].free = 0; + mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name); + if (IS_ERR(mcbsp->clk)) { dev_err(&pdev->dev, "Invalid clock configuration for McBSP%d.\n", - mcbsp[id].id); - ret = -EINVAL; - goto exit; + mcbsp->id); + ret = PTR_ERR(mcbsp->clk); + goto err_clk; } - mcbsp[id].pdata = pdata; - mcbsp[id].dev = &pdev->dev; - platform_set_drvdata(pdev, &mcbsp[id]); + mcbsp->pdata = pdata; + mcbsp->dev = &pdev->dev; + platform_set_drvdata(pdev, mcbsp); + return 0; +err_clk: + iounmap(mcbsp->io_base); +err_ioremap: + mcbsp->free = 0; exit: return ret; } -static int omap_mcbsp_remove(struct platform_device *pdev) +static int __devexit omap_mcbsp_remove(struct platform_device *pdev) { struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); @@ -872,6 +949,8 @@ static int omap_mcbsp_remove(struct platform_device *pdev) clk_disable(mcbsp->clk); clk_put(mcbsp->clk); + iounmap(mcbsp->io_base); + mcbsp->clk = NULL; mcbsp->free = 0; mcbsp->dev = NULL; @@ -882,7 +961,7 @@ static int omap_mcbsp_remove(struct platform_device *pdev) static struct platform_driver omap_mcbsp_driver = { .probe = omap_mcbsp_probe, - .remove = omap_mcbsp_remove, + .remove = __devexit_p(omap_mcbsp_remove), .driver = { .name = "omap-mcbsp", }, diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 847df208c46..80b040fd5ca 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -25,8 +25,8 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> +#include <linux/io.h> #include <asm/system.h> -#include <asm/io.h> #include <linux/spinlock.h> #include <mach/mux.h> diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c index 8bdbf979a25..ebe0c73c890 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/plat-omap/ocpi.c @@ -31,8 +31,8 @@ #include <linux/spinlock.h> #include <linux/err.h> #include <linux/clk.h> +#include <linux/io.h> -#include <asm/io.h> #include <mach/hardware.h> #define OCPI_BASE 0xfffec320 diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index ac67eeb6ca6..9f9a921829c 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -15,9 +15,9 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/io.h> #include <asm/tlb.h> -#include <asm/io.h> #include <asm/cacheflush.h> #include <asm/mach/map.h> @@ -271,7 +271,7 @@ int __init omap1_sram_init(void) #define omap1_sram_init() do {} while (0) #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, u32 base_cs, u32 force_unlock); @@ -352,23 +352,19 @@ static inline int omap243x_sram_init(void) #ifdef CONFIG_ARCH_OMAP3 -static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level); -u32 omap2_sram_reprogram_gpmc(u32 perf_level) -{ - if (!_omap2_sram_reprogram_gpmc) - omap_sram_error(); - - return _omap2_sram_reprogram_gpmc(perf_level); -} - -static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n, - u32 freqsel, u32 m2); -u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2) +static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, + u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, + u32 m2); +u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, u32 m2) { - if (!_omap2_sram_configure_core_dpll) + if (!_omap3_sram_configure_core_dpll) omap_sram_error(); - return _omap2_sram_configure_core_dpll(m, n, freqsel, m2); + return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, + sdrc_actim_ctrla, + sdrc_actim_ctrlb, m2); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ @@ -376,31 +372,16 @@ void restore_sram_functions(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; - _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc, - omap34xx_sram_reprogram_gpmc_sz); - - _omap2_sram_configure_core_dpll = - omap_sram_push(omap34xx_sram_configure_core_dpll, - omap34xx_sram_configure_core_dpll_sz); + _omap3_sram_configure_core_dpll = + omap_sram_push(omap3_sram_configure_core_dpll, + omap3_sram_configure_core_dpll_sz); } int __init omap34xx_sram_init(void) { - _omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init, - omap34xx_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc, - omap34xx_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm, - omap34xx_sram_set_prcm_sz); - - _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc, - omap34xx_sram_reprogram_gpmc_sz); - - _omap2_sram_configure_core_dpll = - omap_sram_push(omap34xx_sram_configure_core_dpll, - omap34xx_sram_configure_core_dpll_sz); + _omap3_sram_configure_core_dpll = + omap_sram_push(omap3_sram_configure_core_dpll, + omap3_sram_configure_core_dpll_sz); return 0; } diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 777485e0636..67ca1e216df 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -27,8 +27,8 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/usb/otg.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/irq.h> #include <asm/system.h> #include <mach/hardware.h> |