diff options
Diffstat (limited to 'arch/arm/plat-omap')
| -rw-r--r-- | arch/arm/plat-omap/common.c | 16 | ||||
| -rw-r--r-- | arch/arm/plat-omap/devices.c | 41 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/common.h | 1 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/dma.h | 2 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/irqs.h | 2 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/omap-serial.h | 129 |
6 files changed, 133 insertions, 58 deletions
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 7d668b3b536..947de3fb93f 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -257,7 +257,6 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals) omap2_set_globals_sdrc(omap2_globals); omap2_set_globals_control(omap2_globals); omap2_set_globals_prcm(omap2_globals); - omap2_set_globals_uart(omap2_globals); } #endif @@ -272,9 +271,6 @@ static struct omap_globals omap242x_globals = { .ctrl = OMAP2420_CTRL_BASE, .prm = OMAP2420_PRM_BASE, .cm = OMAP2420_CM_BASE, - .uart1_phys = OMAP2_UART1_BASE, - .uart2_phys = OMAP2_UART2_BASE, - .uart3_phys = OMAP2_UART3_BASE, }; void __init omap2_set_globals_242x(void) @@ -293,9 +289,6 @@ static struct omap_globals omap243x_globals = { .ctrl = OMAP243X_CTRL_BASE, .prm = OMAP2430_PRM_BASE, .cm = OMAP2430_CM_BASE, - .uart1_phys = OMAP2_UART1_BASE, - .uart2_phys = OMAP2_UART2_BASE, - .uart3_phys = OMAP2_UART3_BASE, }; void __init omap2_set_globals_243x(void) @@ -314,10 +307,6 @@ static struct omap_globals omap3_globals = { .ctrl = OMAP343X_CTRL_BASE, .prm = OMAP3430_PRM_BASE, .cm = OMAP3430_CM_BASE, - .uart1_phys = OMAP3_UART1_BASE, - .uart2_phys = OMAP3_UART2_BASE, - .uart3_phys = OMAP3_UART3_BASE, - .uart4_phys = OMAP3_UART4_BASE, /* Only on 3630 */ }; void __init omap2_set_globals_3xxx(void) @@ -341,10 +330,6 @@ static struct omap_globals omap4_globals = { .prm = OMAP4430_PRM_BASE, .cm = OMAP4430_CM_BASE, .cm2 = OMAP4430_CM2_BASE, - .uart1_phys = OMAP4_UART1_BASE, - .uart2_phys = OMAP4_UART2_BASE, - .uart3_phys = OMAP4_UART3_BASE, - .uart4_phys = OMAP4_UART4_BASE, }; void __init omap2_set_globals_443x(void) @@ -352,7 +337,6 @@ void __init omap2_set_globals_443x(void) omap2_set_globals_tap(&omap4_globals); omap2_set_globals_control(&omap4_globals); omap2_set_globals_prcm(&omap4_globals); - omap2_set_globals_uart(&omap4_globals); } #endif diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index d1920be7833..8e88e0e5d52 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -232,46 +232,6 @@ static void omap_init_uwire(void) static inline void omap_init_uwire(void) {} #endif -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) - -static struct resource wdt_resources[] = { - { - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_wdt_device = { - .name = "omap_wdt", - .id = -1, - .num_resources = ARRAY_SIZE(wdt_resources), - .resource = wdt_resources, -}; - -static void omap_init_wdt(void) -{ - if (cpu_is_omap16xx()) - wdt_resources[0].start = 0xfffeb000; - else if (cpu_is_omap2420()) - wdt_resources[0].start = 0x48022000; /* WDT2 */ - else if (cpu_is_omap2430()) - wdt_resources[0].start = 0x49016000; /* WDT2 */ - else if (cpu_is_omap343x()) - wdt_resources[0].start = 0x48314000; /* WDT2 */ - else if (cpu_is_omap44xx()) - wdt_resources[0].start = 0x4a314000; - else - return; - - wdt_resources[0].end = wdt_resources[0].start + 0x4f; - - (void) platform_device_register(&omap_wdt_device); -} -#else -static inline void omap_init_wdt(void) {} -#endif - /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): @@ -300,7 +260,6 @@ static int __init omap_init_devices(void) omap_init_rng(); omap_init_mcpdm(); omap_init_uwire(); - omap_init_wdt(); return 0; } arch_initcall(omap_init_devices); diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 2d8f98d7ae5..a9d69a09920 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -67,7 +67,6 @@ void omap2_set_globals_tap(struct omap_globals *); void omap2_set_globals_sdrc(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); -void omap2_set_globals_uart(struct omap_globals *); void omap3_map_io(void); diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index af3a03941ad..098f154f5d4 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -319,6 +319,8 @@ #define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ #define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ +#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ +#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ /*----------------------------------------------------------------------------*/ #define OMAP1_DMA_TOUT_IRQ (1 << 0) diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index c01d9f08a19..65e20a68671 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -345,6 +345,8 @@ #define INT_34XX_MMC3_IRQ 94 #define INT_34XX_GPT12_IRQ 95 +#define INT_36XX_UART4_IRQ 80 + #define INT_35XX_HECC0_IRQ 24 #define INT_35XX_HECC1_IRQ 28 #define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67 diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h new file mode 100644 index 00000000000..0d6f076cf74 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -0,0 +1,129 @@ +/* + * Driver for OMAP-UART controller. + * Based on drivers/serial/8250.c + * + * Copyright (C) 2010 Texas Instruments. + * + * Authors: + * Govindraj R <govindraj.raja@ti.com> + * Thara Gopinath <thara@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __OMAP_SERIAL_H__ +#define __OMAP_SERIAL_H__ + +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <plat/control.h> +#include <plat/mux.h> + +#define DRIVER_NAME "omap-hsuart" + +/* + * Use tty device name as ttyO, [O -> OMAP] + * in bootargs we specify as console=ttyO0 if uart1 + * is used as console uart. + */ +#define OMAP_SERIAL_NAME "ttyO" + +#define OMAP_MDR1_DISABLE 0x07 +#define OMAP_MDR1_MODE13X 0x03 +#define OMAP_MDR1_MODE16X 0x00 +#define OMAP_MODE13X_SPEED 230400 + +/* + * LCR = 0XBF: Switch to Configuration Mode B. + * In configuration mode b allow access + * to EFR,DLL,DLH. + * Reference OMAP TRM Chapter 17 + * Section: 1.4.3 Mode Selection + */ +#define OMAP_UART_LCR_CONF_MDB 0XBF + +/* WER = 0x7F + * Enable module level wakeup in WER reg + */ +#define OMAP_UART_WER_MOD_WKUP 0X7F + +/* Enable XON/XOFF flow control on output */ +#define OMAP_UART_SW_TX 0x04 + +/* Enable XON/XOFF flow control on input */ +#define OMAP_UART_SW_RX 0x04 + +#define OMAP_UART_SYSC_RESET 0X07 +#define OMAP_UART_TCR_TRIG 0X0F +#define OMAP_UART_SW_CLR 0XF0 +#define OMAP_UART_FIFO_CLR 0X06 + +#define OMAP_UART_DMA_CH_FREE -1 + +#define RX_TIMEOUT (3 * HZ) +#define OMAP_MAX_HSUART_PORTS 4 + +#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA + +struct omap_uart_port_info { + bool dma_enabled; /* To specify DMA Mode */ + unsigned int uartclk; /* UART clock rate */ + void __iomem *membase; /* ioremap cookie or NULL */ + resource_size_t mapbase; /* resource base */ + unsigned long irqflags; /* request_irq flags */ + upf_t flags; /* UPF_* flags */ +}; + +struct uart_omap_dma { + u8 uart_dma_tx; + u8 uart_dma_rx; + int rx_dma_channel; + int tx_dma_channel; + dma_addr_t rx_buf_dma_phys; + dma_addr_t tx_buf_dma_phys; + unsigned int uart_base; + /* + * Buffer for rx dma.It is not required for tx because the buffer + * comes from port structure. + */ + unsigned char *rx_buf; + unsigned int prev_rx_dma_pos; + int tx_buf_size; + int tx_dma_used; + int rx_dma_used; + spinlock_t tx_lock; + spinlock_t rx_lock; + /* timer to poll activity on rx dma */ + struct timer_list rx_timer; + int rx_buf_size; + int rx_timeout; +}; + +struct uart_omap_port { + struct uart_port port; + struct uart_omap_dma uart_dma; + struct platform_device *pdev; + + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned char fcr; + unsigned char efr; + + int use_dma; + /* + * Some bits in registers are cleared on a read, so they must + * be saved whenever the register is read but the bits will not + * be immediately processed. + */ + unsigned int lsr_break_flag; + unsigned char msr_saved_flags; + char name[20]; + unsigned long port_activity; +}; + +#endif /* __OMAP_SERIAL_H__ */ |