summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-omap
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-omap')
-rw-r--r--arch/arm/plat-omap/dma.c51
-rw-r--r--arch/arm/plat-omap/mux.c2
-rw-r--r--arch/arm/plat-omap/omap-pm-noop.c39
-rw-r--r--arch/arm/plat-omap/omap_device.c25
4 files changed, 52 insertions, 65 deletions
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 6dcad5873d5..c76ed8bff83 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -968,8 +968,7 @@ void omap_stop_dma(int lch)
l = p->dma_read(CCR, lch);
}
if (i >= 100)
- printk(KERN_ERR "DMA drain did not complete on "
- "lch %d\n", lch);
+ pr_err("DMA drain did not complete on lch %d\n", lch);
/* Restore OCP_SYSCONFIG */
p->dma_write(sys_cf, OCP_SYSCONFIG, lch);
} else {
@@ -1153,8 +1152,7 @@ void omap_dma_link_lch(int lch_head, int lch_queue)
if ((dma_chan[lch_head].dev_id == -1) ||
(dma_chan[lch_queue].dev_id == -1)) {
- printk(KERN_ERR "omap_dma: trying to link "
- "non requested channels\n");
+ pr_err("omap_dma: trying to link non requested channels\n");
dump_stack();
}
@@ -1180,15 +1178,13 @@ void omap_dma_unlink_lch(int lch_head, int lch_queue)
if (dma_chan[lch_head].next_lch != lch_queue ||
dma_chan[lch_head].next_lch == -1) {
- printk(KERN_ERR "omap_dma: trying to unlink "
- "non linked channels\n");
+ pr_err("omap_dma: trying to unlink non linked channels\n");
dump_stack();
}
if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
(dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
- printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
- "before unlinking\n");
+ pr_err("omap_dma: You need to stop the DMA channels before unlinking\n");
dump_stack();
}
@@ -1830,16 +1826,15 @@ static int omap1_dma_handle_ch(int ch)
if ((csr & 0x3f) == 0)
return 0;
if (unlikely(dma_chan[ch].dev_id == -1)) {
- printk(KERN_WARNING "Spurious interrupt from DMA channel "
- "%d (CSR %04x)\n", ch, csr);
+ pr_warn("Spurious interrupt from DMA channel %d (CSR %04x)\n",
+ ch, csr);
return 0;
}
if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
- printk(KERN_WARNING "DMA timeout with device %d\n",
- dma_chan[ch].dev_id);
+ pr_warn("DMA timeout with device %d\n", dma_chan[ch].dev_id);
if (unlikely(csr & OMAP_DMA_DROP_IRQ))
- printk(KERN_WARNING "DMA synchronization event drop occurred "
- "with device %d\n", dma_chan[ch].dev_id);
+ pr_warn("DMA synchronization event drop occurred with device %d\n",
+ dma_chan[ch].dev_id);
if (likely(csr & OMAP_DMA_BLOCK_IRQ))
dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
if (likely(dma_chan[ch].callback != NULL))
@@ -1879,21 +1874,19 @@ static int omap2_dma_handle_ch(int ch)
if (!status) {
if (printk_ratelimit())
- printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
- ch);
+ pr_warn("Spurious DMA IRQ for lch %d\n", ch);
p->dma_write(1 << ch, IRQSTATUS_L0, ch);
return 0;
}
if (unlikely(dma_chan[ch].dev_id == -1)) {
if (printk_ratelimit())
- printk(KERN_WARNING "IRQ %04x for non-allocated DMA"
- "channel %d\n", status, ch);
+ pr_warn("IRQ %04x for non-allocated DMA channel %d\n",
+ status, ch);
return 0;
}
if (unlikely(status & OMAP_DMA_DROP_IRQ))
- printk(KERN_INFO
- "DMA synchronization event drop occurred with device "
- "%d\n", dma_chan[ch].dev_id);
+ pr_info("DMA synchronization event drop occurred with device %d\n",
+ dma_chan[ch].dev_id);
if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
printk(KERN_INFO "DMA transaction error with device %d\n",
dma_chan[ch].dev_id);
@@ -2013,8 +2006,9 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
p = pdev->dev.platform_data;
if (!p) {
- dev_err(&pdev->dev, "%s: System DMA initialized without"
- "platform data\n", __func__);
+ dev_err(&pdev->dev,
+ "%s: System DMA initialized without platform data\n",
+ __func__);
return -EINVAL;
}
@@ -2089,8 +2083,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
}
ret = setup_irq(dma_irq, &omap24xx_dma_irq);
if (ret) {
- dev_err(&pdev->dev, "set_up failed for IRQ %d"
- "for DMA (error %d)\n", dma_irq, ret);
+ dev_err(&pdev->dev, "set_up failed for IRQ %d for DMA (error %d)\n",
+ dma_irq, ret);
goto exit_dma_lch_fail;
}
}
@@ -2098,8 +2092,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
/* reserve dma channels 0 and 1 in high security devices */
if (cpu_is_omap34xx() &&
(omap_type() != OMAP2_DEVICE_TYPE_GP)) {
- printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
- "HS ROM code\n");
+ pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
dma_chan[0].dev_id = 0;
dma_chan[1].dev_id = 1;
}
@@ -2107,8 +2100,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
return 0;
exit_dma_irq_fail:
- dev_err(&pdev->dev, "unable to request IRQ %d"
- "for DMA (error %d)\n", dma_irq, ret);
+ dev_err(&pdev->dev, "unable to request IRQ %d for DMA (error %d)\n",
+ dma_irq, ret);
for (irq_rel = 0; irq_rel < ch; irq_rel++) {
dma_irq = platform_get_irq(pdev, irq_rel);
free_irq(dma_irq, (void *)(irq_rel + 1));
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index cff8712122b..fd0d3aad00e 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -76,7 +76,7 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
return -ENODEV;
}
- reg = (struct pin_config *)&mux_cfg->pins[index];
+ reg = &mux_cfg->pins[index];
if (!mux_cfg->cfg_reg)
return -ENODEV;
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index 5a97b4d98d4..9f6413324df 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -41,11 +41,11 @@ int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
};
if (t == -1)
- pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
- "dev %s\n", dev_name(dev));
+ pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n",
+ dev_name(dev));
else
- pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
- "dev %s, t = %ld usec\n", dev_name(dev), t);
+ pr_debug("OMAP PM: add max MPU wakeup latency constraint: dev %s, t = %ld usec\n",
+ dev_name(dev), t);
/*
* For current Linux, this needs to map the MPU to a
@@ -70,11 +70,10 @@ int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
};
if (r == 0)
- pr_debug("OMAP PM: remove min bus tput constraint: "
- "dev %s for agent_id %d\n", dev_name(dev), agent_id);
+ pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n",
+ dev_name(dev), agent_id);
else
- pr_debug("OMAP PM: add min bus tput constraint: "
- "dev %s for agent_id %d: rate %ld KiB\n",
+ pr_debug("OMAP PM: add min bus tput constraint: dev %s for agent_id %d: rate %ld KiB\n",
dev_name(dev), agent_id, r);
/*
@@ -97,11 +96,11 @@ int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
};
if (t == -1)
- pr_debug("OMAP PM: remove max device latency constraint: "
- "dev %s\n", dev_name(dev));
+ pr_debug("OMAP PM: remove max device latency constraint: dev %s\n",
+ dev_name(dev));
else
- pr_debug("OMAP PM: add max device latency constraint: "
- "dev %s, t = %ld usec\n", dev_name(dev), t);
+ pr_debug("OMAP PM: add max device latency constraint: dev %s, t = %ld usec\n",
+ dev_name(dev), t);
/*
* For current Linux, this needs to map the device to a
@@ -127,11 +126,11 @@ int omap_pm_set_max_sdma_lat(struct device *dev, long t)
};
if (t == -1)
- pr_debug("OMAP PM: remove max DMA latency constraint: "
- "dev %s\n", dev_name(dev));
+ pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n",
+ dev_name(dev));
else
- pr_debug("OMAP PM: add max DMA latency constraint: "
- "dev %s, t = %ld usec\n", dev_name(dev), t);
+ pr_debug("OMAP PM: add max DMA latency constraint: dev %s, t = %ld usec\n",
+ dev_name(dev), t);
/*
* For current Linux PM QOS params, this code should scan the
@@ -156,11 +155,11 @@ int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r)
}
if (r == 0)
- pr_debug("OMAP PM: remove min clk rate constraint: "
- "dev %s\n", dev_name(dev));
+ pr_debug("OMAP PM: remove min clk rate constraint: dev %s\n",
+ dev_name(dev));
else
- pr_debug("OMAP PM: add min clk rate constraint: "
- "dev %s, rate = %ld Hz\n", dev_name(dev), r);
+ pr_debug("OMAP PM: add min clk rate constraint: dev %s, rate = %ld Hz\n",
+ dev_name(dev), r);
/*
* Code in a real implementation should keep track of these
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index c490240bb82..b59edb065c7 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -1,4 +1,3 @@
-
/*
* omap_device implementation
*
@@ -153,21 +152,19 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
act_lat = timespec_to_ns(&c);
dev_dbg(&od->pdev->dev,
- "omap_device: pm_lat %d: activate: elapsed time "
- "%llu nsec\n", od->pm_lat_level, act_lat);
+ "omap_device: pm_lat %d: activate: elapsed time %llu nsec\n",
+ od->pm_lat_level, act_lat);
if (act_lat > odpl->activate_lat) {
odpl->activate_lat_worst = act_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->activate_lat = act_lat;
dev_dbg(&od->pdev->dev,
- "new worst case activate latency "
- "%d: %llu\n",
+ "new worst case activate latency %d: %llu\n",
od->pm_lat_level, act_lat);
} else
dev_warn(&od->pdev->dev,
- "activate latency %d "
- "higher than exptected. (%llu > %d)\n",
+ "activate latency %d higher than expected. (%llu > %d)\n",
od->pm_lat_level, act_lat,
odpl->activate_lat);
}
@@ -220,21 +217,19 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
deact_lat = timespec_to_ns(&c);
dev_dbg(&od->pdev->dev,
- "omap_device: pm_lat %d: deactivate: elapsed time "
- "%llu nsec\n", od->pm_lat_level, deact_lat);
+ "omap_device: pm_lat %d: deactivate: elapsed time %llu nsec\n",
+ od->pm_lat_level, deact_lat);
if (deact_lat > odpl->deactivate_lat) {
odpl->deactivate_lat_worst = deact_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->deactivate_lat = deact_lat;
dev_dbg(&od->pdev->dev,
- "new worst case deactivate latency "
- "%d: %llu\n",
+ "new worst case deactivate latency %d: %llu\n",
od->pm_lat_level, deact_lat);
} else
dev_warn(&od->pdev->dev,
- "deactivate latency %d "
- "higher than exptected. (%llu > %d)\n",
+ "deactivate latency %d higher than expected. (%llu > %d)\n",
od->pm_lat_level, deact_lat,
odpl->deactivate_lat);
}
@@ -449,8 +444,8 @@ static int omap_device_count_resources(struct omap_device *od)
for (i = 0; i < od->hwmods_cnt; i++)
c += omap_hwmod_count_resources(od->hwmods[i]);
- pr_debug("omap_device: %s: counted %d total resources across %d "
- "hwmods\n", od->pdev->name, c, od->hwmods_cnt);
+ pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n",
+ od->pdev->name, c, od->hwmods_cnt);
return c;
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-01 04:20:54 +0000