1 files changed, 160 insertions, 0 deletions
diff --git a/arch/arm/plat-s3c/init.c b/arch/arm/plat-s3c/init.c
new file mode 100644
index 00000000000..6790edfaca6
--- /dev/null
+++ b/arch/arm/plat-s3c/init.c
@@ -0,0 +1,160 @@
+/* linux/arch/arm/plat-s3c/init.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series CPU initialisation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/regs-serial.h>
+
+static struct cpu_table *cpu;
+
+static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
+						struct cpu_table *tab,
+						unsigned int count)
+{
+	for (; count != 0; count--, tab++) {
+		if ((idcode & tab->idmask) == tab->idcode)
+			return tab;
+	}
+
+	return NULL;
+}
+
+void __init s3c_init_cpu(unsigned long idcode,
+			 struct cpu_table *cputab, unsigned int cputab_size)
+{
+	cpu = s3c_lookup_cpu(idcode, cputab, cputab_size);
+
+	if (cpu == NULL) {
+		printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
+		panic("Unknown S3C24XX CPU");
+	}
+
+	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
+
+	if (cpu->map_io == NULL || cpu->init == NULL) {
+		printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
+		panic("Unsupported Samsung CPU");
+	}
+
+	cpu->map_io();
+}
+
+/* s3c24xx_init_clocks
+ *
+ * Initialise the clock subsystem and associated information from the
+ * given master crystal value.
+ *
+ * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
+ *      != 0 -> PLL crystal value in Hz
+*/
+
+void __init s3c24xx_init_clocks(int xtal)
+{
+	if (xtal == 0)
+		xtal = 12*1000*1000;
+
+	if (cpu == NULL)
+		panic("s3c24xx_init_clocks: no cpu setup?\n");
+
+	if (cpu->init_clocks == NULL)
+		panic("s3c24xx_init_clocks: cpu has no clock init\n");
+	else
+		(cpu->init_clocks)(xtal);
+}
+
+/* uart management */
+
+static int nr_uarts __initdata = 0;
+
+static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+/* s3c24xx_init_uartdevs
+ *
+ * copy the specified platform data and configuration into our central
+ * set of devices, before the data is thrown away after the init process.
+ *
+ * This also fills in the array passed to the serial driver for the
+ * early initialisation of the console.
+*/
+
+void __init s3c24xx_init_uartdevs(char *name,
+				  struct s3c24xx_uart_resources *res,
+				  struct s3c2410_uartcfg *cfg, int no)
+{
+	struct platform_device *platdev;
+	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
+	struct s3c24xx_uart_resources *resp;
+	int uart;
+
+	memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
+
+	for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
+		platdev = s3c24xx_uart_src[cfgptr->hwport];
+
+		resp = res + cfgptr->hwport;
+
+		s3c24xx_uart_devs[uart] = platdev;
+
+		platdev->name = name;
+		platdev->resource = resp->resources;
+		platdev->num_resources = resp->nr_resources;
+
+		platdev->dev.platform_data = cfgptr;
+	}
+
+	nr_uarts = no;
+}
+
+void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	if (cpu == NULL)
+		return;
+
+	if (cpu->init_uarts == NULL) {
+		printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
+	} else
+		(cpu->init_uarts)(cfg, no);
+}
+
+static int __init s3c_arch_init(void)
+{
+	int ret;
+
+	// do the correct init for cpu
+
+	if (cpu == NULL)
+		panic("s3c_arch_init: NULL cpu\n");
+
+	ret = (cpu->init)();
+	if (ret != 0)
+		return ret;
+
+	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
+	return ret;
+}
+
+arch_initcall(s3c_arch_init);