diff options
Diffstat (limited to 'arch/arm/plat-s3c24xx')
25 files changed, 147 insertions, 1719 deletions
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 342647eb91d..6e93ef8f3d4 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -14,58 +14,40 @@ config PLAT_S3C24XX if PLAT_S3C24XX -# code that is shared between a number of the s3c24xx implementations +# low-level serial option nodes -config S3C2410_CLOCK +config CPU_LLSERIAL_S3C2410_ONLY bool - help - Clock code for the S3C2410, and similar processors which - is currently includes the S3C2410, S3C2440, S3C2442. + default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 -config S3C24XX_DCLK +config CPU_LLSERIAL_S3C2440_ONLY bool - help - Clock code for supporting DCLK/CLKOUT on S3C24XX architectures + default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 -config CPU_S3C244X +config CPU_LLSERIAL_S3C2410 bool - depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442) - help - Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. - -config S3C2440_CPUFREQ - bool "S3C2440/S3C2442 CPU Frequency scaling support" - depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) - select S3C2410_CPUFREQ_UTILS - default y help - CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. + Selected if there is an S3C2410 (or register compatible) serial + low-level implementation needed -config S3C2440_XTAL_12000000 +config CPU_LLSERIAL_S3C2440 bool help - Indicate that the build needs to support 12MHz system - crystal. + Selected if there is an S3C2440 (or register compatible) serial + low-level implementation needed -config S3C2440_XTAL_16934400 - bool - help - Indicate that the build needs to support 16.9344MHz system - crystal. +# code that is shared between a number of the s3c24xx implementations -config S3C2440_PLL_12000000 +config S3C2410_CLOCK bool - depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000 - default y if CPU_FREQ_S3C24XX_PLL help - PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. + Clock code for the S3C2410, and similar processors which + is currently includes the S3C2410, S3C2440, S3C2442. -config S3C2440_PLL_16934400 +config S3C24XX_DCLK bool - depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400 - default y if CPU_FREQ_S3C24XX_PLL help - PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. + Clock code for supporting DCLK/CLKOUT on S3C24XX architectures config S3C24XX_PWM bool "PWM device support" @@ -74,7 +56,6 @@ config S3C24XX_PWM Support for exporting the PWM timer blocks via the pwm device system. - # gpio configurations config S3C24XX_GPIO_EXTRA @@ -117,13 +98,6 @@ config S3C2410_DMA_DEBUG Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. -config S3C24XX_ADC - bool "ADC common driver support" - help - Core support for the ADC block found in the S3C24XX SoC systems - for drivers such as the touchscreen and hwmon to use to share - this resource. - # SPI default pin configuration code config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13 diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 5dee8c12e8b..c2237c41141 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -25,20 +25,12 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o # Architecture dependant builds -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o -obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o -obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o -obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o - obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o -obj-$(CONFIG_S3C24XX_ADC) += adc.o obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c deleted file mode 100644 index ce47627f336..00000000000 --- a/arch/arm/plat-s3c24xx/adc.c +++ /dev/null @@ -1,435 +0,0 @@ -/* arch/arm/plat-s3c24xx/adc.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> - * - * S3C24XX ADC device core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/sched.h> -#include <linux/list.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/interrupt.h> -#include <linux/io.h> - -#include <plat/regs-adc.h> -#include <plat/adc.h> - -/* This driver is designed to control the usage of the ADC block between - * the touchscreen and any other drivers that may need to use it, such as - * the hwmon driver. - * - * Priority will be given to the touchscreen driver, but as this itself is - * rate limited it should not starve other requests which are processed in - * order that they are received. - * - * Each user registers to get a client block which uniquely identifies it - * and stores information such as the necessary functions to callback when - * action is required. - */ - -struct s3c_adc_client { - struct platform_device *pdev; - struct list_head pend; - wait_queue_head_t *wait; - - unsigned int nr_samples; - int result; - unsigned char is_ts; - unsigned char channel; - - void (*select_cb)(struct s3c_adc_client *c, unsigned selected); - void (*convert_cb)(struct s3c_adc_client *c, - unsigned val1, unsigned val2, - unsigned *samples_left); -}; - -struct adc_device { - struct platform_device *pdev; - struct platform_device *owner; - struct clk *clk; - struct s3c_adc_client *cur; - struct s3c_adc_client *ts_pend; - void __iomem *regs; - - unsigned int prescale; - - int irq; -}; - -static struct adc_device *adc_dev; - -static LIST_HEAD(adc_pending); - -#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg) - -static inline void s3c_adc_convert(struct adc_device *adc) -{ - unsigned con = readl(adc->regs + S3C2410_ADCCON); - - con |= S3C2410_ADCCON_ENABLE_START; - writel(con, adc->regs + S3C2410_ADCCON); -} - -static inline void s3c_adc_select(struct adc_device *adc, - struct s3c_adc_client *client) -{ - unsigned con = readl(adc->regs + S3C2410_ADCCON); - - client->select_cb(client, 1); - - con &= ~S3C2410_ADCCON_MUXMASK; - con &= ~S3C2410_ADCCON_STDBM; - con &= ~S3C2410_ADCCON_STARTMASK; - - if (!client->is_ts) - con |= S3C2410_ADCCON_SELMUX(client->channel); - - writel(con, adc->regs + S3C2410_ADCCON); -} - -static void s3c_adc_dbgshow(struct adc_device *adc) -{ - adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n", - readl(adc->regs + S3C2410_ADCCON), - readl(adc->regs + S3C2410_ADCTSC), - readl(adc->regs + S3C2410_ADCDLY)); -} - -static void s3c_adc_try(struct adc_device *adc) -{ - struct s3c_adc_client *next = adc->ts_pend; - - if (!next && !list_empty(&adc_pending)) { - next = list_first_entry(&adc_pending, - struct s3c_adc_client, pend); - list_del(&next->pend); - } else - adc->ts_pend = NULL; - - if (next) { - adc_dbg(adc, "new client is %p\n", next); - adc->cur = next; - s3c_adc_select(adc, next); - s3c_adc_convert(adc); - s3c_adc_dbgshow(adc); - } -} - -int s3c_adc_start(struct s3c_adc_client *client, - unsigned int channel, unsigned int nr_samples) -{ - struct adc_device *adc = adc_dev; - unsigned long flags; - - if (!adc) { - printk(KERN_ERR "%s: failed to find adc\n", __func__); - return -EINVAL; - } - - if (client->is_ts && adc->ts_pend) - return -EAGAIN; - - local_irq_save(flags); - - client->channel = channel; - client->nr_samples = nr_samples; - - if (client->is_ts) - adc->ts_pend = client; - else - list_add_tail(&client->pend, &adc_pending); - - if (!adc->cur) - s3c_adc_try(adc); - local_irq_restore(flags); - - return 0; -} -EXPORT_SYMBOL_GPL(s3c_adc_start); - -static void s3c_convert_done(struct s3c_adc_client *client, - unsigned v, unsigned u, unsigned *left) -{ - client->result = v; - wake_up(client->wait); -} - -int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch) -{ - DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); - int ret; - - client->convert_cb = s3c_convert_done; - client->wait = &wake; - client->result = -1; - - ret = s3c_adc_start(client, ch, 1); - if (ret < 0) - goto err; - - ret = wait_event_timeout(wake, client->result >= 0, HZ / 2); - if (client->result < 0) { - ret = -ETIMEDOUT; - goto err; - } - - client->convert_cb = NULL; - return client->result; - -err: - return ret; -} -EXPORT_SYMBOL_GPL(s3c_adc_read); - -static void s3c_adc_default_select(struct s3c_adc_client *client, - unsigned select) -{ -} - -struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev, - void (*select)(struct s3c_adc_client *client, - unsigned int selected), - void (*conv)(struct s3c_adc_client *client, - unsigned d0, unsigned d1, - unsigned *samples_left), - unsigned int is_ts) -{ - struct s3c_adc_client *client; - - WARN_ON(!pdev); - - if (!select) - select = s3c_adc_default_select; - - if (!pdev) - return ERR_PTR(-EINVAL); - - client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL); - if (!client) { - dev_err(&pdev->dev, "no memory for adc client\n"); - return ERR_PTR(-ENOMEM); - } - - client->pdev = pdev; - client->is_ts = is_ts; - client->select_cb = select; - client->convert_cb = conv; - - return client; -} -EXPORT_SYMBOL_GPL(s3c_adc_register); - -void s3c_adc_release(struct s3c_adc_client *client) -{ - /* We should really check that nothing is in progress. */ - if (adc_dev->cur == client) - adc_dev->cur = NULL; - if (adc_dev->ts_pend == client) - adc_dev->ts_pend = NULL; - else { - struct list_head *p, *n; - struct s3c_adc_client *tmp; - - list_for_each_safe(p, n, &adc_pending) { - tmp = list_entry(p, struct s3c_adc_client, pend); - if (tmp == client) - list_del(&tmp->pend); - } - } - - if (adc_dev->cur == NULL) - s3c_adc_try(adc_dev); - kfree(client); -} -EXPORT_SYMBOL_GPL(s3c_adc_release); - -static irqreturn_t s3c_adc_irq(int irq, void *pw) -{ - struct adc_device *adc = pw; - struct s3c_adc_client *client = adc->cur; - unsigned long flags; - unsigned data0, data1; - - if (!client) { - dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__); - return IRQ_HANDLED; - } - - data0 = readl(adc->regs + S3C2410_ADCDAT0); - data1 = readl(adc->regs + S3C2410_ADCDAT1); - adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1); - - client->nr_samples--; - - if (client->convert_cb) - (client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff, - &client->nr_samples); - - if (client->nr_samples > 0) { - /* fire another conversion for this */ - - client->select_cb(client, 1); - s3c_adc_convert(adc); - } else { - local_irq_save(flags); - (client->select_cb)(client, 0); - adc->cur = NULL; - - s3c_adc_try(adc); - local_irq_restore(flags); - } - - return IRQ_HANDLED; -} - -static int s3c_adc_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct adc_device *adc; - struct resource *regs; - int ret; - - adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL); - if (adc == NULL) { - dev_err(dev, "failed to allocate adc_device\n"); - return -ENOMEM; - } - - adc->pdev = pdev; - adc->prescale = S3C2410_ADCCON_PRSCVL(49); - - adc->irq = platform_get_irq(pdev, 1); - if (adc->irq <= 0) { - dev_err(dev, "failed to get adc irq\n"); - ret = -ENOENT; - goto err_alloc; - } - - ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc); - if (ret < 0) { - dev_err(dev, "failed to attach adc irq\n"); - goto err_alloc; - } - - adc->clk = clk_get(dev, "adc"); - if (IS_ERR(adc->clk)) { - dev_err(dev, "failed to get adc clock\n"); - ret = PTR_ERR(adc->clk); - goto err_irq; - } - - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) { - dev_err(dev, "failed to find registers\n"); - ret = -ENXIO; - goto err_clk; - } - - adc->regs = ioremap(regs->start, resource_size(regs)); - if (!adc->regs) { - dev_err(dev, "failed to map registers\n"); - ret = -ENXIO; - goto err_clk; - } - - clk_enable(adc->clk); - - writel(adc->prescale | S3C2410_ADCCON_PRSCEN, - adc->regs + S3C2410_ADCCON); - - dev_info(dev, "attached adc driver\n"); - - platform_set_drvdata(pdev, adc); - adc_dev = adc; - - return 0; - - err_clk: - clk_put(adc->clk); - - err_irq: - free_irq(adc->irq, adc); - - err_alloc: - kfree(adc); - return ret; -} - -static int __devexit s3c_adc_remove(struct platform_device *pdev) -{ - struct adc_device *adc = platform_get_drvdata(pdev); - - iounmap(adc->regs); - free_irq(adc->irq, adc); - clk_disable(adc->clk); - clk_put(adc->clk); - kfree(adc); - - return 0; -} - -#ifdef CONFIG_PM -static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct adc_device *adc = platform_get_drvdata(pdev); - u32 con; - - con = readl(adc->regs + S3C2410_ADCCON); - con |= S3C2410_ADCCON_STDBM; - writel(con, adc->regs + S3C2410_ADCCON); - - clk_disable(adc->clk); - - return 0; -} - -static int s3c_adc_resume(struct platform_device *pdev) -{ - struct adc_device *adc = platform_get_drvdata(pdev); - - clk_enable(adc->clk); - - writel(adc->prescale | S3C2410_ADCCON_PRSCEN, - adc->regs + S3C2410_ADCCON); - - return 0; -} - -#else -#define s3c_adc_suspend NULL -#define s3c_adc_resume NULL -#endif - -static struct platform_driver s3c_adc_driver = { - .driver = { - .name = "s3c24xx-adc", - .owner = THIS_MODULE, - }, - .probe = s3c_adc_probe, - .remove = __devexit_p(s3c_adc_remove), - .suspend = s3c_adc_suspend, - .resume = s3c_adc_resume, -}; - -static int __init adc_init(void) -{ - int ret; - - ret = platform_driver_register(&s3c_adc_driver); - if (ret) - printk(KERN_ERR "%s: failed to add adc driver\n", __func__); - - return ret; -} - -arch_initcall(adc_init); diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c index ac061a1bcb3..cf97caafe56 100644 --- a/arch/arm/plat-s3c24xx/clock-dclk.c +++ b/arch/arm/plat-s3c24xx/clock-dclk.c @@ -161,14 +161,18 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) /* external clock definitions */ +static struct clk_ops dclk_ops = { + .set_parent = s3c24xx_dclk_setparent, + .set_rate = s3c24xx_set_dclk_rate, + .round_rate = s3c24xx_round_dclk_rate, +}; + struct clk s3c24xx_dclk0 = { .name = "dclk0", .id = -1, .ctrlbit = S3C2410_DCLKCON_DCLK0EN, .enable = s3c24xx_dclk_enable, - .set_parent = s3c24xx_dclk_setparent, - .set_rate = s3c24xx_set_dclk_rate, - .round_rate = s3c24xx_round_dclk_rate, + .ops = &dclk_ops, }; struct clk s3c24xx_dclk1 = { @@ -176,19 +180,21 @@ struct clk s3c24xx_dclk1 = { .id = -1, .ctrlbit = S3C2410_DCLKCON_DCLK1EN, .enable = s3c24xx_dclk_enable, - .set_parent = s3c24xx_dclk_setparent, - .set_rate = s3c24xx_set_dclk_rate, - .round_rate = s3c24xx_round_dclk_rate, + .ops = &dclk_ops, +}; + +static struct clk_ops clkout_ops = { + .set_parent = s3c24xx_clkout_setparent, }; struct clk s3c24xx_clkout0 = { .name = "clkout0", .id = -1, - .set_parent = s3c24xx_clkout_setparent, + .ops = &clkout_ops, }; struct clk s3c24xx_clkout1 = { .name = "clkout1", .id = -1, - .set_parent = s3c24xx_clkout_setparent, + .ops = &clkout_ops, }; diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c index 2d42efb9f4e..1ecc15bfe9d 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq.c +++ b/arch/arm/plat-s3c24xx/cpu-freq.c @@ -23,6 +23,7 @@ #include <linux/sysdev.h> #include <linux/kobject.h> #include <linux/sysfs.h> +#include <linux/slab.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 4af9dd94879..9ca64df35bf 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -49,9 +49,7 @@ #include <plat/s3c2400.h> #include <plat/s3c2410.h> #include <plat/s3c2412.h> -#include "s3c244x.h" -#include <plat/s3c2440.h> -#include <plat/s3c2442.h> +#include <plat/s3c244x.h> #include <plat/s3c2443.h> /* table of supported CPUs */ diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index f52a92ce8dd..9265f09bfa5 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -20,6 +20,7 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/slab.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -32,11 +33,14 @@ #include <plat/regs-serial.h> #include <plat/udc.h> +#include <plat/mci.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/regs-spi.h> +#include <mach/ts.h> + /* Serial port registrations */ static struct resource s3c2410_uart0_resource[] = { @@ -110,34 +114,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { }, }; -/* yart devices */ - -static struct platform_device s3c24xx_uart_device0 = { - .id = 0, -}; - -static struct platform_device s3c24xx_uart_device1 = { - .id = 1, -}; - -static struct platform_device s3c24xx_uart_device2 = { - .id = 2, -}; - -static struct platform_device s3c24xx_uart_device3 = { - .id = 3, -}; - -struct platform_device *s3c24xx_uart_src[4] = { - &s3c24xx_uart_device0, - &s3c24xx_uart_device1, - &s3c24xx_uart_device2, - &s3c24xx_uart_device3, -}; - -struct platform_device *s3c24xx_uart_devs[4] = { -}; - /* LCD Controller */ static struct resource s3c_lcd_resource[] = { @@ -182,6 +158,40 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) } } +/* Touchscreen */ + +static struct resource s3c_ts_resource[] = { + [0] = { + .start = S3C24XX_PA_ADC, + .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TC, + .end = IRQ_TC, + .flags = IORESOURCE_IRQ, + }, + +}; + +struct platform_device s3c_device_ts = { + .name = "s3c2410-ts", + .id = -1, + .dev.parent = &s3c_device_adc.dev, + .num_resources = ARRAY_SIZE(s3c_ts_resource), + .resource = s3c_ts_resource, +}; +EXPORT_SYMBOL(s3c_device_ts); + +static struct s3c2410_ts_mach_info s3c2410ts_info; + +void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info) +{ + memcpy(&s3c2410ts_info, hard_s3c2410ts_info, sizeof(struct s3c2410_ts_mach_info)); + s3c_device_ts.dev.platform_data = &s3c2410ts_info; +} +EXPORT_SYMBOL(s3c24xx_ts_set_platdata); + /* USB Device (Gadget)*/ static struct resource s3c_usbgadget_resource[] = { @@ -361,6 +371,18 @@ struct platform_device s3c_device_sdi = { EXPORT_SYMBOL(s3c_device_sdi); +void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata) +{ + struct s3c24xx_mci_pdata *npd; + + npd = kmemdup(pdata, sizeof(struct s3c24xx_mci_pdata), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory to copy pdata", __func__); + + s3c_device_sdi.dev.platform_data = npd; +} + + /* SPI (0) */ static struct resource s3c_spi0_resource[] = { diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index f0ea7943ac5..93827b3d4e8 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -33,7 +33,7 @@ #include <mach/dma.h> #include <mach/map.h> -#include <plat/dma-plat.h> +#include <plat/dma-s3c24xx.h> #include <plat/regs-dma.h> /* io map for dma */ diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 6d7a961d326..4f0f11a6a67 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -20,7 +20,7 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #include <mach/hardware.h> #include <asm/irq.h> #include <plat/pm.h> diff --git a/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h new file mode 100644 index 00000000000..de5e88fdcb3 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h @@ -0,0 +1,37 @@ +/* arch/arm/plat-s3c24xx/include/plat/audio-simtec.h + * + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Simtec Audio support. +*/ + +/** + * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio + * @use_mpllin: Select codec clock from MPLLin + * @output_cdclk: Need to output CDCLK to the codec + * @have_mic: Set if we have a MIC socket + * @have_lout: Set if we have a LineOut socket + * @amp_gpio: GPIO pin to enable the AMP + * @amp_gain: Option GPIO to control AMP gain + */ +struct s3c24xx_audio_simtec_pdata { + unsigned int use_mpllin:1; + unsigned int output_cdclk:1; + + unsigned int have_mic:1; + unsigned int have_lout:1; + + int amp_gpio; + int amp_gain[2]; + + void (*startup)(void); +}; + +extern int simtec_audio_add(const char *codec_name, bool has_lr_routing, + struct s3c24xx_audio_simtec_pdata *pdata); diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h index 33d421d78ba..d623235ae96 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h @@ -135,7 +135,7 @@ struct s3c_cpufreq_config { * @locktime_m: The lock-time in uS for the MPLL. * @locktime_u: The lock-time in uS for the UPLL. * @locttime_bits: The number of bits each LOCKTIME field. - * @need_pll: Set if this driver needs to change the PLL values to acheive + * @need_pll: Set if this driver needs to change the PLL values to achieve * any frequency changes. This is really only need by devices like the * S3C2410 where there is no or limited divider between the PLL and the * ARMCLK. diff --git a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h deleted file mode 100644 index 9565ead1bc9..00000000000 --- a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h +++ /dev/null @@ -1,84 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C24XX DMA support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <plat/dma-core.h> - -extern struct sysdev_class dma_sysclass; -extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS]; - -#define DMA_CH_VALID (1<<31) -#define DMA_CH_NEVER (1<<30) - -struct s3c24xx_dma_addr { - unsigned long from; - unsigned long to; -}; - -/* struct s3c24xx_dma_map - * - * this holds the mapping information for the channel selected - * to be connected to the specified device -*/ - -struct s3c24xx_dma_map { - const char *name; - struct s3c24xx_dma_addr hw_addr; - - unsigned long channels[S3C_DMA_CHANNELS]; - unsigned long channels_rx[S3C_DMA_CHANNELS]; -}; - -struct s3c24xx_dma_selection { - struct s3c24xx_dma_map *map; - unsigned long map_size; - unsigned long dcon_mask; - - void (*select)(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map); - - void (*direction)(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map, - enum s3c2410_dmasrc dir); -}; - -extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); - -/* struct s3c24xx_dma_order_ch - * - * channel map for one of the `enum dma_ch` dma channels. the list - * entry contains a set of low-level channel numbers, orred with - * DMA_CH_VALID, which are checked in the order in the array. -*/ - -struct s3c24xx_dma_order_ch { - unsigned int list[S3C_DMA_CHANNELS]; /* list of channels */ - unsigned int flags; /* flags */ -}; - -/* struct s3c24xx_dma_order - * - * information provided by either the core or the board to give the - * dma system a hint on how to allocate channels -*/ - -struct s3c24xx_dma_order { - struct s3c24xx_dma_order_ch channels[DMACH_MAX]; -}; - -extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map); - -/* DMA init code, called from the cpu support code */ - -extern int s3c2410_dma_init(void); - -extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq, - unsigned int stride); diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h index 36aaa10fad0..2ac2b21ec49 100644 --- a/arch/arm/plat-s3c24xx/include/plat/mci.h +++ b/arch/arm/plat-s3c24xx/include/plat/mci.h @@ -40,4 +40,13 @@ struct s3c24xx_mci_pdata { unsigned short vdd); }; +/** + * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device + * @pdata: The platform data + * + * Copy the platform data supplied by @pdata so that this can be marked + * __initdata. + */ +extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata); + #endif /* _ARCH_NCI_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/plat-s3c24xx/include/plat/pm-core.h deleted file mode 100644 index fb45dd9adca..00000000000 --- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h +++ /dev/null @@ -1,64 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -static inline void s3c_pm_debug_init_uart(void) -{ - unsigned long tmp = __raw_readl(S3C2410_CLKCON); - - /* re-start uart clocks */ - tmp |= S3C2410_CLKCON_UART0; - tmp |= S3C2410_CLKCON_UART1; - tmp |= S3C2410_CLKCON_UART2; - - __raw_writel(tmp, S3C2410_CLKCON); - udelay(10); -} - -static inline void s3c_pm_arch_prepare_irqs(void) -{ - __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK); - __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK); - - /* ack any outstanding external interrupts before we go to sleep */ - - __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); - __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); - __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); - -} - -static inline void s3c_pm_arch_stop_clocks(void) -{ - __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ -} - -static void s3c_pm_show_resume_irqs(int start, unsigned long which, - unsigned long mask); - -static inline void s3c_pm_arch_show_resume_irqs(void) -{ - S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n", - __raw_readl(S3C2410_SRCPND), - __raw_readl(S3C2410_EINTPEND)); - - s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND), - s3c_irqwake_intmask); - - s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), - s3c_irqwake_eintmask); -} - -static inline void s3c_pm_arch_update_uart(void __iomem *regs, - struct pm_uart_save *save) -{ -} diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h deleted file mode 100644 index 107853bf948..00000000000 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2440 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2440 -extern int s3c2440_init(void); -#else -#define s3c2440_init NULL -#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h deleted file mode 100644 index 451a23a2092..00000000000 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2442 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2442 -extern int s3c2442_init(void); -#else -#define s3c2442_init NULL -#endif diff --git a/arch/arm/plat-s3c24xx/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h index 6aab5eaae2b..307248d1ccb 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/s3c244x.h +/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -23,3 +23,15 @@ extern void s3c244x_init_clocks(int xtal); #define s3c244x_init_uarts NULL #define s3c244x_map_io NULL #endif + +#ifdef CONFIG_CPU_S3C2440 +extern int s3c2440_init(void); +#else +#define s3c2440_init NULL +#endif + +#ifdef CONFIG_CPU_S3C2442 +extern int s3c2442_init(void); +#else +#define s3c2442_init NULL +#endif diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c index 963fb0b4379..b1908e56da1 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c +++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c @@ -17,6 +17,7 @@ #include <linux/cpufreq.h> #include <linux/seq_file.h> #include <linux/io.h> +#include <linux/slab.h> #include <mach/map.h> #include <mach/regs-mem.h> diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c index 24993dce10b..0b46d3895d6 100644 --- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c +++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c @@ -21,6 +21,7 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/slab.h> #include <linux/amba/pl093.h> diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c deleted file mode 100644 index 976002fb1b8..00000000000 --- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c +++ /dev/null @@ -1,311 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c - * - * Copyright (c) 2006-2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * Vincent Sanders <vince@simtec.co.uk> - * - * S3C2440/S3C2442 CPU Frequency scaling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/sysdev.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <mach/hardware.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/cpu-freq-core.h> -#include <plat/clock.h> - -static struct clk *xtal; -static struct clk *fclk; -static struct clk *hclk; -static struct clk *armclk; - -/* HDIV: 1, 2, 3, 4, 6, 8 */ - -static inline int within_khz(unsigned long a, unsigned long b) -{ - long diff = a - b; - - return (diff >= -1000 && diff <= 1000); -} - -/** - * s3c2440_cpufreq_calcdivs - calculate divider settings - * @cfg: The cpu frequency settings. - * - * Calcualte the divider values for the given frequency settings - * specified in @cfg. The values are stored in @cfg for later use - * by the relevant set routine if the request settings can be reached. - */ -int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned int hdiv, pdiv; - unsigned long hclk, fclk, armclk; - unsigned long hclk_max; - - fclk = cfg->freq.fclk; - armclk = cfg->freq.armclk; - hclk_max = cfg->max.hclk; - - s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n", - __func__, fclk, armclk, hclk_max); - - if (armclk > fclk) { - printk(KERN_WARNING "%s: armclk > fclk\n", __func__); - armclk = fclk; - } - - /* if we are in DVS, we need HCLK to be <= ARMCLK */ - if (armclk < fclk && armclk < hclk_max) - hclk_max = armclk; - - for (hdiv = 1; hdiv < 9; hdiv++) { - if (hdiv == 5 || hdiv == 7) - hdiv++; - - hclk = (fclk / hdiv); - if (hclk <= hclk_max || within_khz(hclk, hclk_max)) - break; - } - - s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv); - - if (hdiv > 8) - goto invalid; - - pdiv = (hclk > cfg->max.pclk) ? 2 : 1; - - if ((hclk / pdiv) > cfg->max.pclk) - pdiv++; - - s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); - - if (pdiv > 2) - goto invalid; - - pdiv *= hdiv; - - /* calculate a valid armclk */ - - if (armclk < hclk) - armclk = hclk; - - /* if we're running armclk lower than fclk, this really means - * that the system should go into dvs mode, which means that - * armclk is connected to hclk. */ - if (armclk < fclk) { - cfg->divs.dvs = 1; - armclk = hclk; - } else - cfg->divs.dvs = 0; - - cfg->freq.armclk = armclk; - - /* store the result, and then return */ - - cfg->divs.h_divisor = hdiv; - cfg->divs.p_divisor = pdiv; - - return 0; - - invalid: - return -EINVAL; -} - -#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \ - S3C2440_CAMDIVN_HCLK4_HALF) - -/** - * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings - * @cfg: The cpu frequency settings. - * - * Set the divisors from the settings in @cfg, which where generated - * during the calculation phase by s3c2440_cpufreq_calcdivs(). - */ -static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned long clkdiv, camdiv; - - s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__, - cfg->divs.h_divisor, cfg->divs.p_divisor); - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); - - clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN); - camdiv &= ~CAMDIVN_HCLK_HALF; - - switch (cfg->divs.h_divisor) { - case 1: - clkdiv |= S3C2440_CLKDIVN_HDIVN_1; - break; - - case 2: - clkdiv |= S3C2440_CLKDIVN_HDIVN_2; - break; - - case 6: - camdiv |= S3C2440_CAMDIVN_HCLK3_HALF; - case 3: - clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6; - break; - - case 8: - camdiv |= S3C2440_CAMDIVN_HCLK4_HALF; - case 4: - clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8; - break; - - default: - BUG(); /* we don't expect to get here. */ - } - - if (cfg->divs.p_divisor != cfg->divs.h_divisor) - clkdiv |= S3C2440_CLKDIVN_PDIVN; - - /* todo - set pclk. */ - - /* Write the divisors first with hclk intentionally halved so that - * when we write clkdiv we will under-frequency instead of over. We - * then make a short delay and remove the hclk halving if necessary. - */ - - __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN); - __raw_writel(clkdiv, S3C2410_CLKDIVN); - - ndelay(20); - __raw_writel(camdiv, S3C2440_CAMDIVN); - - clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); -} - -static int run_freq_for(unsigned long max_hclk, unsigned long fclk, - int *divs, - struct cpufreq_frequency_table *table, - size_t table_size) -{ - unsigned long freq; - int index = 0; - int div; - - for (div = *divs; div > 0; div = *divs++) { - freq = fclk / div; - - if (freq > max_hclk && div != 1) - continue; - - freq /= 1000; /* table is in kHz */ - index = s3c_cpufreq_addfreq(table, index, table_size, freq); - if (index < 0) - break; - } - - return index; -} - -static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 }; - -static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg, - struct cpufreq_frequency_table *table, - size_t table_size) -{ - int ret; - - WARN_ON(cfg->info == NULL); - WARN_ON(cfg->board == NULL); - - ret = run_freq_for(cfg->info->max.hclk, - cfg->info->max.fclk, - hclk_divs, - table, table_size); - - s3c_freq_dbg("%s: returning %d\n", __func__, ret); - - return ret; -} - -struct s3c_cpufreq_info s3c2440_cpufreq_info = { - .max = { - .fclk = 400000000, - .hclk = 133333333, - .pclk = 66666666, - }, - - .locktime_m = 300, - .locktime_u = 300, - .locktime_bits = 16, - - .name = "s3c244x", - .calc_iotiming = s3c2410_iotiming_calc, - .set_iotiming = s3c2410_iotiming_set, - .get_iotiming = s3c2410_iotiming_get, - .set_fvco = s3c2410_set_fvco, - - .set_refresh = s3c2410_cpufreq_setrefresh, - .set_divs = s3c2440_cpufreq_setdivs, - .calc_divs = s3c2440_cpufreq_calcdivs, - .calc_freqtable = s3c2440_cpufreq_calctable, - - .resume_clocks = s3c244x_setup_clocks, - - .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), -}; - -static int s3c2440_cpufreq_add(struct sys_device *sysdev) -{ - xtal = s3c_cpufreq_clk_get(NULL, "xtal"); - hclk = s3c_cpufreq_clk_get(NULL, "hclk"); - fclk = s3c_cpufreq_clk_get(NULL, "fclk"); - armclk = s3c_cpufreq_clk_get(NULL, "armclk"); - - if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) { - printk(KERN_ERR "%s: failed to get clocks\n", __func__); - return -ENOENT; - } - - return s3c_cpufreq_register(&s3c2440_cpufreq_info); -} - -static struct sysdev_driver s3c2440_cpufreq_driver = { - .add = s3c2440_cpufreq_add, -}; - -static int s3c2440_cpufreq_init(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, - &s3c2440_cpufreq_driver); -} - -/* arch_initcall adds the clocks we need, so use subsys_initcall. */ -subsys_initcall(s3c2440_cpufreq_init); - -static struct sysdev_driver s3c2442_cpufreq_driver = { - .add = s3c2440_cpufreq_add, -}; - -static int s3c2442_cpufreq_init(void) -{ - return sysdev_driver_register(&s3c2442_sysclass, - &s3c2442_cpufreq_driver); -} - -subsys_initcall(s3c2442_cpufreq_init); diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c deleted file mode 100644 index 49f65032f2c..00000000000 --- a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c +++ /dev/null @@ -1,97 +0,0 @@ -/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c - * - * Copyright (c) 2006-2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * Vincent Sanders <vince@arm.linux.org.uk> - * - * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/sysdev.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <plat/cpu.h> -#include <plat/cpu-freq-core.h> - -static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = { - { .frequency = 75000000, .index = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */ - { .frequency = 80000000, .index = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */ - { .frequency = 90000000, .index = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */ - { .frequency = 100000000, .index = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */ - { .frequency = 110000000, .index = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */ - { .frequency = 120000000, .index = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */ - { .frequency = 150000000, .index = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */ - { .frequency = 160000000, .index = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */ - { .frequency = 170000000, .index = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */ - { .frequency = 180000000, .index = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */ - { .frequency = 190000000, .index = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */ - { .frequency = 200000000, .index = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */ - { .frequency = 210000000, .index = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */ - { .frequency = 220000000, .index = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */ - { .frequency = 230000000, .index = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */ - { .frequency = 240000000, .index = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */ - { .frequency = 300000000, .index = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */ - { .frequency = 310000000, .index = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */ - { .frequency = 320000000, .index = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */ - { .frequency = 330000000, .index = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */ - { .frequency = 340000000, .index = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */ - { .frequency = 350000000, .index = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */ - { .frequency = 360000000, .index = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */ - { .frequency = 370000000, .index = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */ - { .frequency = 380000000, .index = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */ - { .frequency = 390000000, .index = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */ - { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ -}; - -static int s3c2440_plls12_add(struct sys_device *dev) -{ - struct clk *xtal_clk; - unsigned long xtal; - - xtal_clk = clk_get(NULL, "xtal"); - if (IS_ERR(xtal_clk)) - return PTR_ERR(xtal_clk); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - if (xtal == 12000000) { - printk(KERN_INFO "Using PLL table for 12MHz crystal\n"); - return s3c_plltab_register(s3c2440_plls_12, - ARRAY_SIZE(s3c2440_plls_12)); - } - - return 0; -} - -static struct sysdev_driver s3c2440_plls12_drv = { - .add = s3c2440_plls12_add, -}; - -static int __init s3c2440_pll_12mhz(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv); - -} - -arch_initcall(s3c2440_pll_12mhz); - -static struct sysdev_driver s3c2442_plls12_drv = { - .add = s3c2440_plls12_add, -}; - -static int __init s3c2442_pll_12mhz(void) -{ - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv); - -} - -arch_initcall(s3c2442_pll_12mhz); diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c deleted file mode 100644 index 7679af13a94..00000000000 --- a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c +++ /dev/null @@ -1,127 +0,0 @@ -/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c - * - * Copyright (c) 2006-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * Vincent Sanders <vince@arm.linux.org.uk> - * - * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/sysdev.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <plat/cpu.h> -#include <plat/cpu-freq-core.h> - -static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = { - { .frequency = 78019200, .index = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */ - { .frequency = 84067200, .index = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */ - { .frequency = 90115200, .index = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */ - { .frequency = 96163200, .index = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */ - { .frequency = 102135600, .index = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */ - { .frequency = 108259200, .index = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */ - { .frequency = 114307200, .index = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */ - { .frequency = 120234240, .index = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */ - { .frequency = 126161280, .index = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */ - { .frequency = 132088320, .index = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */ - { .frequency = 138015360, .index = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */ - { .frequency = 144789120, .index = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */ - { .frequency = 150100363, .index = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */ - { .frequency = 156038400, .index = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */ - { .frequency = 162086400, .index = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */ - { .frequency = 168134400, .index = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */ - { .frequency = 174048000, .index = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */ - { .frequency = 180230400, .index = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */ - { .frequency = 186278400, .index = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */ - { .frequency = 192326400, .index = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */ - { .frequency = 198132480, .index = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */ - { .frequency = 204271200, .index = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */ - { .frequency = 210268800, .index = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */ - { .frequency = 216518400, .index = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */ - { .frequency = 222264000, .index = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */ - { .frequency = 228614400, .index = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */ - { .frequency = 234259200, .index = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */ - { .frequency = 240468480, .index = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */ - { .frequency = 246960000, .index = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */ - { .frequency = 252322560, .index = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */ - { .frequency = 258249600, .index = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */ - { .frequency = 264176640, .index = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */ - { .frequency = 270950400, .index = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */ - { .frequency = 276030720, .index = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */ - { .frequency = 282240000, .index = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */ - { .frequency = 289578240, .index = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */ - { .frequency = 294235200, .index = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */ - { .frequency = 300200727, .index = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */ - { .frequency = 306358690, .index = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */ - { .frequency = 312076800, .index = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */ - { .frequency = 318366720, .index = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */ - { .frequency = 324172800, .index = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */ - { .frequency = 330220800, .index = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */ - { .frequency = 336268800, .index = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */ - { .frequency = 342074880, .index = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */ - { .frequency = 348096000, .index = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */ - { .frequency = 355622400, .index = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */ - { .frequency = 360460800, .index = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */ - { .frequency = 366206400, .index = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */ - { .frequency = 372556800, .index = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */ - { .frequency = 378201600, .index = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */ - { .frequency = 384652800, .index = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */ - { .frequency = 391608000, .index = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */ - { .frequency = 396264960, .index = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */ - { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ -}; - -static int s3c2440_plls169344_add(struct sys_device *dev) -{ - struct clk *xtal_clk; - unsigned long xtal; - - xtal_clk = clk_get(NULL, "xtal"); - if (IS_ERR(xtal_clk)) - return PTR_ERR(xtal_clk); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - if (xtal == 169344000) { - printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n"); - return s3c_plltab_register(s3c2440_plls_169344, - ARRAY_SIZE(s3c2440_plls_169344)); - } - - return 0; -} - -static struct sysdev_driver s3c2440_plls169344_drv = { - .add = s3c2440_plls169344_add, -}; - -static int __init s3c2440_pll_16934400(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, - &s3c2440_plls169344_drv); - -} - -arch_initcall(s3c2440_pll_16934400); - -static struct sysdev_driver s3c2442_plls169344_drv = { - .add = s3c2440_plls169344_add, -}; - -static int __init s3c2442_pll_16934400(void) -{ - return sysdev_driver_register(&s3c2442_sysclass, - &s3c2442_plls169344_drv); - -} - -arch_initcall(s3c2442_pll_16934400); diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c deleted file mode 100644 index 79371091aa3..00000000000 --- a/arch/arm/plat-s3c24xx/s3c244x-clock.c +++ /dev/null @@ -1,136 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c - * - * Copyright (c) 2004-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440/S3C2442 Common clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/sysdev.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/atomic.h> -#include <asm/irq.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) -{ - unsigned long camdivn; - unsigned long dvs; - - if (parent == &clk_f) - dvs = 0; - else if (parent == &clk_h) - dvs = S3C2440_CAMDIVN_DVSEN; - else - return -EINVAL; - - clk->parent = parent; - - camdivn = __raw_readl(S3C2440_CAMDIVN); - camdivn &= ~S3C2440_CAMDIVN_DVSEN; - camdivn |= dvs; - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -static struct clk clk_arm = { - .name = "armclk", - .id = -1, - .set_parent = s3c2440_setparent_armclk, -}; - -static int s3c244x_clk_add(struct sys_device *sysdev) -{ - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - unsigned long clkdivn; - struct clk *clock_upll; - int ret; - - printk("S3C244X: Clock Support, DVS %s\n", - (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); - - clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f; - - ret = s3c24xx_register_clock(&clk_arm); - if (ret < 0) { - printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret); - return ret; - } - - clock_upll = clk_get(NULL, "upll"); - if (IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C244X: Failed to get upll clock\n"); - return -ENOENT; - } - - /* check rate of UPLL, and if it is near 96MHz, then change - * to using half the UPLL rate for the system */ - - if (clk_get_rate(clock_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - - spin_lock(&clocks_lock); - - clkdivn = __raw_readl(S3C2410_CLKDIVN); - clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(clkdivn, S3C2410_CLKDIVN); - - spin_unlock(&clocks_lock); - } - - return 0; -} - -static struct sysdev_driver s3c2440_clk_driver = { - .add = s3c244x_clk_add, -}; - -static int s3c2440_clk_init(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver); -} - -arch_initcall(s3c2440_clk_init); - -static struct sysdev_driver s3c2442_clk_driver = { - .add = s3c244x_clk_add, -}; - -static int s3c2442_clk_init(void) -{ - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver); -} - -arch_initcall(s3c2442_clk_init); diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c deleted file mode 100644 index a75c0c2431e..00000000000 --- a/arch/arm/plat-s3c24xx/s3c244x-irq.c +++ /dev/null @@ -1,142 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/sysdev.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -/* camera irq */ - -static void s3c_irq_demux_cam(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 11; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_CAM_C); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_CAM_P); - } - } -} - -#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) - -static void -s3c_irq_cam_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11); -} - -static void -s3c_irq_cam_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_CAM); -} - -static void -s3c_irq_cam_ack(unsigned int irqno) -{ - s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11); -} - -static struct irq_chip s3c_irq_cam = { - .mask = s3c_irq_cam_mask, - .unmask = s3c_irq_cam_unmask, - .ack = s3c_irq_cam_ack, -}; - -static int s3c244x_irq_add(struct sys_device *sysdev) -{ - unsigned int irqno; - - set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip); - set_irq_handler(IRQ_NFCON, handle_level_irq); - set_irq_flags(IRQ_NFCON, IRQF_VALID); - - /* add chained handler for camera */ - - set_irq_chip(IRQ_CAM, &s3c_irq_level_chip); - set_irq_handler(IRQ_CAM, handle_level_irq); - set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam); - - for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { - set_irq_chip(irqno, &s3c_irq_cam); - set_irq_handler(irqno, handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct sysdev_driver s3c2440_irq_driver = { - .add = s3c244x_irq_add, - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, -}; - -static int s3c2440_irq_init(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver); -} - -arch_initcall(s3c2440_irq_init); - -static struct sysdev_driver s3c2442_irq_driver = { - .add = s3c244x_irq_add, - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, -}; - - -static int s3c2442_irq_init(void) -{ - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver); -} - -arch_initcall(s3c2442_irq_init); diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c deleted file mode 100644 index 1364317d421..00000000000 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ /dev/null @@ -1,195 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c244x.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/sysdev.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <plat/cpu-freq.h> - -#include <mach/regs-clock.h> -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> -#include <mach/regs-dsc.h> - -#include <plat/s3c2410.h> -#include <plat/s3c2440.h> -#include "s3c244x.h" -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/pll.h> - -static struct map_desc s3c244x_iodesc[] __initdata = { - IODESC_ENT(CLKPWR), - IODESC_ENT(TIMER), - IODESC_ENT(WATCHDOG), -}; - -/* uart initialisation */ - -void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); -} - -void __init s3c244x_map_io(void) -{ - /* register our io-tables */ - - iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc)); - - /* rename any peripherals used differing from the s3c2410 */ - - s3c_device_sdi.name = "s3c2440-sdi"; - s3c_device_i2c0.name = "s3c2440-i2c"; - s3c_device_nand.name = "s3c2440-nand"; - s3c_device_usbgadget.name = "s3c2440-usbgadget"; -} - -void __init_or_cpufreq s3c244x_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long clkdiv; - unsigned long camdiv; - unsigned long xtal; - unsigned long hclk, fclk, pclk; - int hdiv = 1; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2; - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); - - /* work out clock scalings */ - - switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) { - case S3C2440_CLKDIVN_HDIVN_1: - hdiv = 1; - break; - - case S3C2440_CLKDIVN_HDIVN_2: - hdiv = 2; - break; - - case S3C2440_CLKDIVN_HDIVN_4_8: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4; - break; - - case S3C2440_CLKDIVN_HDIVN_3_6: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3; - break; - } - - hclk = fclk / hdiv; - pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brief summary of clocks, etc */ - - printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -void __init s3c244x_init_clocks(int xtal) -{ - /* initialise the clocks here, to allow other things like the - * console to use them, and to add new ones after the initialisation - */ - - s3c24xx_register_baseclocks(xtal); - s3c244x_setup_clocks(); - s3c2410_baseclk_add(); -} - -#ifdef CONFIG_PM - -static struct sleep_save s3c244x_sleep[] = { - SAVE_ITEM(S3C2440_DSC0), - SAVE_ITEM(S3C2440_DSC1), - SAVE_ITEM(S3C2440_GPJDAT), - SAVE_ITEM(S3C2440_GPJCON), - SAVE_ITEM(S3C2440_GPJUP) -}; - -static int s3c244x_suspend(struct sys_device *dev, pm_message_t state) -{ - s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); - return 0; -} - -static int s3c244x_resume(struct sys_device *dev) -{ - s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); - return 0; -} - -#else -#define s3c244x_suspend NULL -#define s3c244x_resume NULL -#endif - -/* Since the S3C2442 and S3C2440 share items, put both sysclasses here */ - -struct sysdev_class s3c2440_sysclass = { - .name = "s3c2440-core", - .suspend = s3c244x_suspend, - .resume = s3c244x_resume -}; - -struct sysdev_class s3c2442_sysclass = { - .name = "s3c2442-core", - .suspend = s3c244x_suspend, - .resume = s3c244x_resume -}; - -/* need to register class before we actually register the device, and - * we also need to ensure that it has been initialised before any of the - * drivers even try to use it (even if not on an s3c2440 based system) - * as a driver which may support both 2410 and 2440 may try and use it. -*/ - -static int __init s3c2440_core_init(void) -{ - return sysdev_class_register(&s3c2440_sysclass); -} - -core_initcall(s3c2440_core_init); - -static int __init s3c2442_core_init(void) -{ - return sysdev_class_register(&s3c2442_sysclass); -} - -core_initcall(s3c2442_core_init); |