diff options
Diffstat (limited to 'arch/arm/plat-s3c24xx')
| -rw-r--r-- | arch/arm/plat-s3c24xx/Kconfig | 57 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/Makefile | 19 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/common-smdk.c | 207 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/cpu.c | 28 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/dma.c | 1 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/pm-simtec.c | 66 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/s3c2443-clock.c | 636 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/setup-i2c.c | 27 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/setup-ts.c | 34 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/simtec-audio.c | 77 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c | 36 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c | 38 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c | 36 |
13 files changed, 33 insertions, 1229 deletions
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index d8973ac46bc..21bf6adb919 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -4,7 +4,7 @@ config PLAT_S3C24XX bool - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX default y select NO_IOPORT select ARCH_REQUIRE_GPIOLIB @@ -44,12 +44,6 @@ config S3C2410_CLOCK Clock code for the S3C2410, and similar processors which is currently includes the S3C2410, S3C2440, S3C2442. -config S3C2443_CLOCK - bool - help - Clock code for the S3C2443 and similar processors, which includes - the S3C2416 and S3C2450. - config S3C24XX_DCLK bool help @@ -76,15 +70,9 @@ config S3C24XX_GPIO_EXTRA128 Add an extra 128 gpio numbers to the available GPIO pool. This is available for boards that need extra gpios for external devices. -config PM_SIMTEC - bool - help - Common power management code for systems that are - compatible with the Simtec style of power management - -config S3C2410_DMA +config S3C24XX_DMA bool "S3C2410 DMA support" - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX select S3C_DMA help S3C2410 DMA support. This is needed for drivers like sound which @@ -93,31 +81,11 @@ config S3C2410_DMA config S3C2410_DMA_DEBUG bool "S3C2410 DMA support debug" - depends on ARCH_S3C2410 && S3C2410_DMA + depends on ARCH_S3C24XX && S3C2410_DMA help Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. -# SPI default pin configuration code - -config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13 - bool - help - SPI GPIO configuration code for BUS0 when connected to - GPE11, GPE12 and GPE13. - -config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7 - bool - help - SPI GPIO configuration code for BUS 1 when connected to - GPG5, GPG6 and GPG7. - -config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10 - bool - help - SPI GPIO configuration code for BUS 1 when connected to - GPD8, GPD9 and GPD10. - # common code for s3c24xx based machines, such as the SMDKs. # cpu frequency items common between s3c2410 and s3c2440/s3c2442 @@ -145,21 +113,4 @@ config S3C2412_IOTIMING Intel node to select io timing code that is common to the s3c2412 and the s3c2443. -config MACH_SMDK - bool - help - Common machine code for SMDK2410 and SMDK2440 - -config S3C24XX_SIMTEC_AUDIO - bool - depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS) - default y - help - Add audio devices for common Simtec S3C24XX boards - -config S3C2410_SETUP_TS - bool - help - Compile in platform device definition for Samsung TouchScreen. - endif diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index b2b01125de6..2467b800cc7 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -23,28 +23,11 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o # Architecture dependent builds -obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o -obj-$(CONFIG_S3C2443_CLOCK) += s3c2443-clock.o -obj-$(CONFIG_S3C2410_DMA) += dma.o +obj-$(CONFIG_S3C24XX_DMA) += dma.o obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o - -# device specific setup and/or initialisation -obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o -obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o - -# SPI gpio central GPIO functions - -obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o -obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o -obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10) += spi-bus1-gpd8_9_10.o - -# machine common support - -obj-$(CONFIG_MACH_SMDK) += common-smdk.o -obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO) += simtec-audio.o diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c deleted file mode 100644 index 084604be6ad..00000000000 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ /dev/null @@ -1,207 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/common-smdk.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Common code for SMDK2410 and SMDK2440 boards - * - * http://www.fluff.org/ben/smdk2440/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/device.h> -#include <linux/platform_device.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/mtd/partitions.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/mach-types.h> -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <mach/regs-gpio.h> -#include <mach/leds-gpio.h> - -#include <plat/nand.h> - -#include <plat/common-smdk.h> -#include <plat/gpio-cfg.h> -#include <plat/devs.h> -#include <plat/pm.h> - -/* LED devices */ - -static struct s3c24xx_led_platdata smdk_pdata_led4 = { - .gpio = S3C2410_GPF(4), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, - .name = "led4", - .def_trigger = "timer", -}; - -static struct s3c24xx_led_platdata smdk_pdata_led5 = { - .gpio = S3C2410_GPF(5), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, - .name = "led5", - .def_trigger = "nand-disk", -}; - -static struct s3c24xx_led_platdata smdk_pdata_led6 = { - .gpio = S3C2410_GPF(6), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, - .name = "led6", -}; - -static struct s3c24xx_led_platdata smdk_pdata_led7 = { - .gpio = S3C2410_GPF(7), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, - .name = "led7", -}; - -static struct platform_device smdk_led4 = { - .name = "s3c24xx_led", - .id = 0, - .dev = { - .platform_data = &smdk_pdata_led4, - }, -}; - -static struct platform_device smdk_led5 = { - .name = "s3c24xx_led", - .id = 1, - .dev = { - .platform_data = &smdk_pdata_led5, - }, -}; - -static struct platform_device smdk_led6 = { - .name = "s3c24xx_led", - .id = 2, - .dev = { - .platform_data = &smdk_pdata_led6, - }, -}; - -static struct platform_device smdk_led7 = { - .name = "s3c24xx_led", - .id = 3, - .dev = { - .platform_data = &smdk_pdata_led7, - }, -}; - -/* NAND parititon from 2.4.18-swl5 */ - -static struct mtd_partition smdk_default_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_16K, - .offset = 0, - }, - [1] = { - .name = "S3C2410 flash partition 1", - .offset = 0, - .size = SZ_2M, - }, - [2] = { - .name = "S3C2410 flash partition 2", - .offset = SZ_4M, - .size = SZ_4M, - }, - [3] = { - .name = "S3C2410 flash partition 3", - .offset = SZ_8M, - .size = SZ_2M, - }, - [4] = { - .name = "S3C2410 flash partition 4", - .offset = SZ_1M * 10, - .size = SZ_4M, - }, - [5] = { - .name = "S3C2410 flash partition 5", - .offset = SZ_1M * 14, - .size = SZ_1M * 10, - }, - [6] = { - .name = "S3C2410 flash partition 6", - .offset = SZ_1M * 24, - .size = SZ_1M * 24, - }, - [7] = { - .name = "S3C2410 flash partition 7", - .offset = SZ_1M * 48, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct s3c2410_nand_set smdk_nand_sets[] = { - [0] = { - .name = "NAND", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(smdk_default_nand_part), - .partitions = smdk_default_nand_part, - }, -}; - -/* choose a set of timings which should suit most 512Mbit - * chips and beyond. -*/ - -static struct s3c2410_platform_nand smdk_nand_info = { - .tacls = 20, - .twrph0 = 60, - .twrph1 = 20, - .nr_sets = ARRAY_SIZE(smdk_nand_sets), - .sets = smdk_nand_sets, -}; - -/* devices we initialise */ - -static struct platform_device __initdata *smdk_devs[] = { - &s3c_device_nand, - &smdk_led4, - &smdk_led5, - &smdk_led6, - &smdk_led7, -}; - -void __init smdk_machine_init(void) -{ - /* Configure the LEDs (even if we have no LED support)*/ - - s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); - - s3c2410_gpio_setpin(S3C2410_GPF(4), 1); - s3c2410_gpio_setpin(S3C2410_GPF(5), 1); - s3c2410_gpio_setpin(S3C2410_GPF(6), 1); - s3c2410_gpio_setpin(S3C2410_GPF(7), 1); - - if (machine_is_smdk2443()) - smdk_nand_info.twrph0 = 50; - - s3c_nand_set_platdata(&smdk_nand_info); - - platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs)); - - s3c_pm_init(); -} diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 21f1fda8b66..0db73ae646b 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -32,8 +32,10 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/regs-clock.h> #include <asm/irq.h> #include <asm/cacheflush.h> +#include <asm/system_info.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -190,8 +192,34 @@ static unsigned long s3c24xx_read_idcode_v4(void) return __raw_readl(S3C2410_GSTATUS1); } +static void s3c24xx_default_idle(void) +{ + unsigned long tmp; + int i; + + /* idle the system by using the idle mode which will wait for an + * interrupt to happen before restarting the system. + */ + + /* Warning: going into idle state upsets jtag scanning */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); + + /* the samsung port seems to do a loop and then unset idle.. */ + for (i = 0; i < 50; i++) + tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ + + /* this bit is not cleared on re-start... */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); +} + void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { + arm_pm_idle = s3c24xx_default_idle; + /* initialise the io descriptors we need for initialisation */ iotable_init(mach_desc, size); iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 2bab4c99a23..28f898f7538 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -27,7 +27,6 @@ #include <linux/errno.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/irq.h> #include <mach/hardware.h> #include <mach/dma.h> diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c deleted file mode 100644 index 68296b1fe7e..00000000000 --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ /dev/null @@ -1,66 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/pm-simtec.c - * - * Copyright 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://armlinux.simtec.co.uk/ - * - * Power Management helpers for Simtec S3C24XX implementations - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/hardware.h> - -#include <mach/map.h> -#include <mach/regs-gpio.h> -#include <mach/regs-mem.h> - -#include <asm/mach-types.h> - -#include <plat/pm.h> - -#define COPYRIGHT ", Copyright 2005 Simtec Electronics" - -/* pm_simtec_init - * - * enable the power management functions -*/ - -static __init int pm_simtec_init(void) -{ - unsigned long gstatus4; - - /* check which machine we are running on */ - - if (!machine_is_bast() && !machine_is_vr1000() && - !machine_is_anubis() && !machine_is_osiris() && - !machine_is_aml_m5900()) - return 0; - - printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); - - gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; - gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; - gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK); - - __raw_writel(gstatus4, S3C2410_GSTATUS4); - - return s3c_pm_init(); -} - -arch_initcall(pm_simtec_init); diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c deleted file mode 100644 index 95e68190d59..00000000000 --- a/arch/arm/plat-s3c24xx/s3c2443-clock.c +++ /dev/null @@ -1,636 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c - * - * Copyright (c) 2007, 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2443 Clock control suport - common code - */ - -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/regs-s3c2443-clock.h> - -#include <plat/s3c2443.h> -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -#include <plat/cpu-freq.h> - - -static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable) -{ - u32 ctrlbit = clk->ctrlbit; - u32 con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -int s3c2443_clkcon_enable_h(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_HCLKCON, clk, enable); -} - -int s3c2443_clkcon_enable_p(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_PCLKCON, clk, enable); -} - -int s3c2443_clkcon_enable_s(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_SCLKCON, clk, enable); -} - -/* mpllref is a direct descendant of clk_xtal by default, but it is not - * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as - * such directly equating the two source clocks is impossible. - */ -struct clk clk_mpllref = { - .name = "mpllref", - .parent = &clk_xtal, -}; - -static struct clk *clk_epllref_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpllref, - [2] = &clk_xtal, - [3] = &clk_ext, -}; - -struct clksrc_clk clk_epllref = { - .clk = { - .name = "epllref", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_epllref_sources, - .nr_sources = ARRAY_SIZE(clk_epllref_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 }, -}; - -/* esysclk - * - * this is sourced from either the EPLL or the EPLLref clock -*/ - -static struct clk *clk_sysclk_sources[] = { - [0] = &clk_epllref.clk, - [1] = &clk_epll, -}; - -struct clksrc_clk clk_esysclk = { - .clk = { - .name = "esysclk", - .parent = &clk_epll, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_sysclk_sources, - .nr_sources = ARRAY_SIZE(clk_sysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 }, -}; - -static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV0); - - div &= S3C2443_CLKDIV0_EXTDIV_MASK; - div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ - - return parent_rate / (div + 1); -} - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_mpllref, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_getrate_mdivclk, - }, -}; - -static struct clk *clk_msysclk_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpll, - [2] = &clk_mdivclk, - [3] = &clk_mpllref, -}; - -struct clksrc_clk clk_msysclk = { - .clk = { - .name = "msysclk", - .parent = &clk_xtal, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_msysclk_sources, - .nr_sources = ARRAY_SIZE(clk_msysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 }, -}; - -/* prediv - * - * this divides the msysclk down to pass to h/p/etc. - */ - -static unsigned long s3c2443_prediv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK; - clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; - - return rate / (clkdiv0 + 1); -} - -static struct clk clk_prediv = { - .name = "prediv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_prediv_getrate, - }, -}; - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. -*/ - -static unsigned int *armdiv; -static int nr_armdiv; -static int armdivmask; - -static unsigned long s3c2443_armclk_roundrate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned best = 256; /* bigger than any value */ - unsigned div; - int ptr; - - if (!nr_armdiv) - return -EINVAL; - - for (ptr = 0; ptr < nr_armdiv; ptr++) { - div = armdiv[ptr]; - if (div) { - /* cpufreq provides 266mhz as 266666000 not 266666666 */ - calc = (parent / div / 1000) * 1000; - if (calc <= rate && div < best) - best = div; - } - } - - return parent / best; -} - -static unsigned long s3c2443_armclk_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkcon0; - int val; - - if (!nr_armdiv || !armdivmask) - return -EINVAL; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= armdivmask; - val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT; - - return rate / armdiv[val]; -} - -static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned div; - unsigned best = 256; /* bigger than any value */ - int ptr; - int val = -1; - - if (!nr_armdiv || !armdivmask) - return -EINVAL; - - for (ptr = 0; ptr < nr_armdiv; ptr++) { - div = armdiv[ptr]; - if (div) { - /* cpufreq provides 266mhz as 266666000 not 266666666 */ - calc = (parent / div / 1000) * 1000; - if (calc <= rate && div < best) { - best = div; - val = ptr; - } - } - } - - if (val >= 0) { - unsigned long clkcon0; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= ~armdivmask; - clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; - __raw_writel(clkcon0, S3C2443_CLKDIV0); - } - - return (val == -1) ? -EINVAL : 0; -} - -static struct clk clk_armdiv = { - .name = "armdiv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .round_rate = s3c2443_armclk_roundrate, - .get_rate = s3c2443_armclk_getrate, - .set_rate = s3c2443_armclk_setrate, - }, -}; - -/* armclk - * - * this is the clock fed into the ARM core itself, from armdiv or from hclk. - */ - -static struct clk *clk_arm_sources[] = { - [0] = &clk_armdiv, - [1] = &clk_h, -}; - -static struct clksrc_clk clk_arm = { - .clk = { - .name = "armclk", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_arm_sources, - .nr_sources = ARRAY_SIZE(clk_arm_sources), - }, - .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 }, -}; - -/* usbhost - * - * usb host bus-clock, usually 48MHz to provide USB bus clock timing -*/ - -static struct clksrc_clk clk_usb_bus_host = { - .clk = { - .name = "usb-bus-host-parent", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_USBHOST, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; - -/* common clksrc clocks */ - -static struct clksrc_clk clksrc_clks[] = { - { - /* camera interface bus-clock, divided down from esysclk */ - .clk = { - .name = "camif-upll", /* same as 2440 name */ - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_CAMCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 }, - }, { - .clk = { - .name = "display-if", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_DISPCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 }, - }, -}; - -static struct clksrc_clk clk_esys_uart = { - /* ART baud-rate clock sourced from esysclk via a divisor */ - .clk = { - .name = "uartclk", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, -}; - -static struct clk clk_i2s_ext = { - .name = "i2s-ext", -}; - -/* i2s_eplldiv - * - * This clock is the output from the I2S divisor of ESYSCLK, and is separate - * from the mux that comes after it (cannot merge into one single clock) -*/ - -static struct clksrc_clk clk_i2s_eplldiv = { - .clk = { - .name = "i2s-eplldiv", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, -}; - -/* i2s-ref - * - * i2s bus reference clock, selectable from external, esysclk or epllref - * - * Note, this used to be two clocks, but was compressed into one. -*/ - -static struct clk *clk_i2s_srclist[] = { - [0] = &clk_i2s_eplldiv.clk, - [1] = &clk_i2s_ext, - [2] = &clk_epllref.clk, - [3] = &clk_epllref.clk, -}; - -static struct clksrc_clk clk_i2s = { - .clk = { - .name = "i2s-if", - .ctrlbit = S3C2443_SCLKCON_I2SCLK, - .enable = s3c2443_clkcon_enable_s, - - }, - .sources = &(struct clksrc_sources) { - .sources = clk_i2s_srclist, - .nr_sources = ARRAY_SIZE(clk_i2s_srclist), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, -}; - -static struct clk init_clocks_off[] = { - { - .name = "iis", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIS, - }, { - .name = "hsspi", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_HSSPI, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIC, - } -}; - -static struct clk init_clocks[] = { - { - .name = "dma", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA0, - }, { - .name = "dma", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA1, - }, { - .name = "dma", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA2, - }, { - .name = "dma", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA3, - }, { - .name = "dma", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA4, - }, { - .name = "dma", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA5, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBD, - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_LCDC, - - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_PWMT, - }, { - .name = "cfc", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_CFC, - }, { - .name = "ssmc", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_SSMC, - }, { - .name = "uart", - .devname = "s3c2440-uart.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2440-uart.1", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2440-uart.2", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART2, - }, { - .name = "uart", - .devname = "s3c2440-uart.3", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART3, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_WDT, - }, { - .name = "ac97", - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_AC97, - }, { - .name = "nand", - .parent = &clk_h, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus_host.clk, - } -}; - -static struct clk hsmmc1_clk = { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_HSMMC, -}; - -static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0) -{ - clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; - - return clkcon0 + 1; -} - -/* EPLLCON compatible enough to get on/off information */ - -void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll) -{ - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - struct clk *xtal_clk; - unsigned long xtal; - unsigned long pll; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - int ptr; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - pll = get_mpll(mpllcon, xtal); - clk_msysclk.clk.rate = pll; - - fclk = clk_get_rate(&clk_armdiv); - hclk = s3c2443_prediv_getrate(&clk_prediv); - hclk /= s3c2443_get_hdiv(clkdiv0); - pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); - - s3c24xx_setup_clocks(fclk, hclk, pclk); - - printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", - (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on", - print_mhz(pll), print_mhz(fclk), - print_mhz(hclk), print_mhz(pclk)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) - s3c_set_clksrc(&clksrc_clks[ptr], true); - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); - clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000); - } - - printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (epllcon & S3C2443_PLLCON_OFF) ? "off":"on", - print_mhz(clk_get_rate(&clk_epll)), - print_mhz(clk_get_rate(&clk_usb_bus))); -} - -static struct clk *clks[] __initdata = { - &clk_prediv, - &clk_mpllref, - &clk_mdivclk, - &clk_ext, - &clk_epll, - &clk_usb_bus, - &clk_armdiv, - &hsmmc1_clk, -}; - -static struct clksrc_clk *clksrcs[] __initdata = { - &clk_i2s_eplldiv, - &clk_i2s, - &clk_usb_bus_host, - &clk_epllref, - &clk_esysclk, - &clk_msysclk, - &clk_arm, -}; - -static struct clk_lookup s3c2443_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk), -}; - -void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, - unsigned int *divs, int nr_divs, - int divmask) -{ - int ptr; - - armdiv = divs; - nr_armdiv = nr_divs; - armdivmask = divmask; - - /* s3c2443 parents h and p clocks from prediv */ - clk_h.parent = &clk_prediv; - clk_p.parent = &clk_prediv; - - clk_usb_bus.parent = &clk_usb_bus_host.clk; - clk_epll.parent = &clk_epllref.clk; - - s3c24xx_register_baseclocks(xtal); - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - /* See s3c2443/etc notes on disabling clocks at init time */ - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); - - s3c2443_common_setup_clocks(get_mpll); -} diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c deleted file mode 100644 index 9e90a7cbd1d..00000000000 --- a/arch/arm/plat-s3c24xx/setup-i2c.c +++ /dev/null @@ -1,27 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/setup-i2c.c - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX Base setup for i2c device - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/gpio.h> - -struct platform_device; - -#include <plat/gpio-cfg.h> -#include <plat/iic.h> -#include <mach/hardware.h> -#include <mach/regs-gpio.h> - -void s3c_i2c0_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA); - s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL); -} diff --git a/arch/arm/plat-s3c24xx/setup-ts.c b/arch/arm/plat-s3c24xx/setup-ts.c deleted file mode 100644 index ed263866367..00000000000 --- a/arch/arm/plat-s3c24xx/setup-ts.c +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/setup-ts.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on S3C24XX setup for i2c device - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/gpio.h> - -struct platform_device; /* don't need the contents */ - -#include <mach/hardware.h> -#include <mach/regs-gpio.h> - -/** - * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems - * - * Configure the GPIO for the S3C2410 system, where we have external FETs - * connected to the device (later systems such as the S3C2440 integrate - * these into the device). - */ -void s3c24xx_ts_cfg_gpio(struct platform_device *dev) -{ - s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON); - s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON); - s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON); - s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON); -} diff --git a/arch/arm/plat-s3c24xx/simtec-audio.c b/arch/arm/plat-s3c24xx/simtec-audio.c deleted file mode 100644 index 6bc832e0d8e..00000000000 --- a/arch/arm/plat-s3c24xx/simtec-audio.c +++ /dev/null @@ -1,77 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/simtec-audio.c - * - * Copyright (c) 2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Audio setup for various Simtec S3C24XX implementations - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/bast-map.h> -#include <mach/bast-irq.h> -#include <mach/bast-cpld.h> - -#include <mach/hardware.h> -#include <mach/regs-gpio.h> - -#include <plat/audio-simtec.h> -#include <plat/devs.h> - -/* platform ops for audio */ - -static void simtec_audio_startup_lrroute(void) -{ - unsigned int tmp; - unsigned long flags; - - local_irq_save(flags); - - tmp = __raw_readb(BAST_VA_CTRL1); - tmp &= ~BAST_CPLD_CTRL1_LRMASK; - tmp |= BAST_CPLD_CTRL1_LRCDAC; - __raw_writeb(tmp, BAST_VA_CTRL1); - - local_irq_restore(flags); -} - -static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata; -static char our_name[32]; - -static struct platform_device simtec_audio_dev = { - .name = our_name, - .id = -1, - .dev = { - .parent = &s3c_device_iis.dev, - .platform_data = &simtec_audio_platdata, - }, -}; - -int __init simtec_audio_add(const char *name, bool has_lr_routing, - struct s3c24xx_audio_simtec_pdata *spd) -{ - if (!name) - name = "tlv320aic23"; - - snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name); - - /* copy platform data so the source can be __initdata */ - if (spd) - simtec_audio_platdata = *spd; - - if (has_lr_routing) - simtec_audio_platdata.startup = simtec_audio_startup_lrroute; - - platform_device_register(&s3c_device_iis); - platform_device_register(&simtec_audio_dev); - return 0; -} diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c deleted file mode 100644 index 704175b0573..00000000000 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX SPI - gpio configuration for bus 0 on gpe11,12,13 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/kernel.h> -#include <linux/gpio.h> - -#include <mach/spi.h> -#include <mach/regs-gpio.h> - -void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, - int enable) -{ - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0); - s3c_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0); - s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0); - s3c2410_gpio_pullup(S3C2410_GPE(11), 0); - s3c2410_gpio_pullup(S3C2410_GPE(13), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); - } -} diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c deleted file mode 100644 index 72457afd625..00000000000 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/kernel.h> -#include <linux/gpio.h> - -#include <mach/spi.h> -#include <mach/regs-gpio.h> - -void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, - int enable) -{ - - printk(KERN_INFO "%s(%d)\n", __func__, enable); - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1); - s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1); - s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1); - s3c2410_gpio_pullup(S3C2410_GPD(10), 0); - s3c2410_gpio_pullup(S3C2410_GPD(9), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); - } -} diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c deleted file mode 100644 index c3972b645d1..00000000000 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpg5_6_7.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX SPI - gpio configuration for bus 1 on gpg5,6,7 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/kernel.h> -#include <linux/gpio.h> - -#include <mach/spi.h> -#include <mach/regs-gpio.h> - -void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, - int enable) -{ - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1); - s3c_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1); - s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1); - s3c2410_gpio_pullup(S3C2410_GPG(5), 0); - s3c2410_gpio_pullup(S3C2410_GPG(6), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); - } -} |