diff options
Diffstat (limited to 'arch/arm/plat-s3c')
42 files changed, 4006 insertions, 19 deletions
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 31656c33e05..de9383814e5 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -6,34 +6,32 @@ config PLAT_S3C bool - depends on ARCH_S3C2410 - default y if ARCH_S3C2410 + depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX + default y select NO_IOPORT help Base platform code for any Samsung S3C device # low-level serial option nodes +if PLAT_S3C + config CPU_LLSERIAL_S3C2410_ONLY bool - depends on ARCH_S3C2410 default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 config CPU_LLSERIAL_S3C2440_ONLY bool - depends on ARCH_S3C2410 default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 config CPU_LLSERIAL_S3C2410 bool - depends on ARCH_S3C2410 help Selected if there is an S3C2410 (or register compatible) serial low-level implementation needed config CPU_LLSERIAL_S3C2440 bool - depends on ARCH_S3C2410 help Selected if there is an S3C2440 (or register compatible) serial low-level implementation needed @@ -44,7 +42,7 @@ comment "Boot options" config S3C_BOOT_WATCHDOG bool "S3C Initialisation watchdog" - depends on PLAT_S3C && S3C2410_WATCHDOG + depends on S3C2410_WATCHDOG help Say y to enable the watchdog during the kernel decompression stage. If the kernel fails to uncompress, then the watchdog @@ -52,16 +50,22 @@ config S3C_BOOT_WATCHDOG config S3C_BOOT_ERROR_RESET bool "S3C Reboot on decompression error" - depends on PLAT_S3C help Say y here to use the watchdog to reset the system if the kernel decompressor detects an error during decompression. +config S3C_BOOT_UART_FORCE_FIFO + bool "Force UART FIFO on during boot process" + default y + help + Say Y here to force the UART FIFOs on during the kernel + uncompressor + comment "Power management" config S3C2410_PM_DEBUG bool "S3C2410 PM Suspend debug" - depends on PLAT_S3C && PM + depends on PM help Say Y here if you want verbose debugging from the PM Suspend and Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> @@ -69,7 +73,7 @@ config S3C2410_PM_DEBUG config S3C2410_PM_CHECK bool "S3C2410 PM Suspend Memory CRC" - depends on PLAT_S3C && PM && CRC32 + depends on PM && CRC32 help Enable the PM code's memory area checksum over sleep. This option will generate CRCs of all blocks of memory, and store them before @@ -83,7 +87,7 @@ config S3C2410_PM_CHECK config S3C2410_PM_CHECK_CHUNKSIZE int "S3C2410 PM Suspend CRC Chunksize (KiB)" - depends on PLAT_S3C && PM && S3C2410_PM_CHECK + depends on PM && S3C2410_PM_CHECK default 64 help Set the chunksize in Kilobytes of the CRC for checking memory @@ -95,10 +99,77 @@ config S3C2410_PM_CHECK_CHUNKSIZE config S3C_LOWLEVEL_UART_PORT int "S3C UART to use for low-level messages" - depends on PLAT_S3C default 0 help Choice of which UART port to use for the low-level messages, such as the `Uncompressing...` at start time. The value of this configuration should be between zero and two. The port must have been initialised by the boot-loader before use. + +# options for gpiolib support + +config S3C_GPIO_SPACE + int "Space between gpio banks" + default 0 + help + Add a number of spare GPIO entries between each bank for debugging + purposes. This allows any problems where an counter overflows from + one bank to another to be caught, at the expense of using a little + more memory. + +config S3C_GPIO_TRACK + bool + help + Internal configuration option to enable the s3c specific gpio + chip tracking if the platform requires it. + +config S3C_GPIO_PULL_UPDOWN + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_PULL_DOWN + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_PULL_UP + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_CFG_S3C24XX + bool + help + Internal configuration to enable S3C24XX style GPIO configuration + functions. + +config S3C_GPIO_CFG_S3C64XX + bool + help + Internal configuration to enable S3C64XX style GPIO configuration + functions. + +# device definitions to compile in + +config S3C_DEV_HSMMC + bool + help + Compile in platform device definitions for HSMMC code + +config S3C_DEV_HSMMC1 + bool + help + Compile in platform device definitions for HSMMC channel 1 + +config S3C_DEV_I2C1 + bool + help + Compile in platform device definitions for I2C channel 1 + +config S3C_DEV_FB + bool + help + Compile in platform device definition for framebuffer + +endif diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index f03d7b35ba3..39195f972d5 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -1,3 +1,27 @@ -# dummy makefile, currently just including asm/arm/plat-s3c/include/plat +# arch/arm/plat-s3c/Makefile +# +# Copyright 2008 Simtec Electronics +# +# Licensed under GPLv2 -obj-n := dummy.o +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for all Samsung SoCs + +obj-y += init.o +obj-y += time.o +obj-y += clock.o +obj-y += pwm-clock.o +obj-y += gpio.o +obj-y += gpio-config.o + +# devices + +obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o +obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o +obj-y += dev-i2c0.o +obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o +obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c new file mode 100644 index 00000000000..b6be76e2fe5 --- /dev/null +++ b/arch/arm/plat-s3c/clock.c @@ -0,0 +1,368 @@ +/* linux/arch/arm/plat-s3c24xx/clock.c + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX Core clock control support + * + * Based on, and code from linux/arch/arm/mach-versatile/clock.c + ** + ** Copyright (C) 2004 ARM Limited. + ** Written by Deep Blue Solutions Limited. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/clk.h> +#include <linux/spinlock.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <asm/irq.h> + +#include <plat/cpu-freq.h> + +#include <plat/clock.h> +#include <plat/cpu.h> + +/* clock information */ + +static LIST_HEAD(clocks); + +/* We originally used an mutex here, but some contexts (see resume) + * are calling functions such as clk_set_parent() with IRQs disabled + * causing an BUG to be triggered. + */ +DEFINE_SPINLOCK(clocks_lock); + +/* enable and disable calls for use with the clk struct */ + +static int clk_null_enable(struct clk *clk, int enable) +{ + return 0; +} + +/* Clock API calls */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p; + struct clk *clk = ERR_PTR(-ENOENT); + int idno; + + if (dev == NULL || dev->bus != &platform_bus_type) + idno = -1; + else + idno = to_platform_device(dev)->id; + + spin_lock(&clocks_lock); + + list_for_each_entry(p, &clocks, list) { + if (p->id == idno && + strcmp(id, p->name) == 0 && + try_module_get(p->owner)) { + clk = p; + break; + } + } + + /* check for the case where a device was supplied, but the + * clock that was being searched for is not device specific */ + + if (IS_ERR(clk)) { + list_for_each_entry(p, &clocks, list) { + if (p->id == -1 && strcmp(id, p->name) == 0 && + try_module_get(p->owner)) { + clk = p; + break; + } + } + } + + spin_unlock(&clocks_lock); + return clk; +} + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); +} + +int clk_enable(struct clk *clk) +{ + if (IS_ERR(clk) || clk == NULL) + return -EINVAL; + + clk_enable(clk->parent); + + spin_lock(&clocks_lock); + + if ((clk->usage++) == 0) + (clk->enable)(clk, 1); + + spin_unlock(&clocks_lock); + return 0; +} + +void clk_disable(struct clk *clk) +{ + if (IS_ERR(clk) || clk == NULL) + return; + + spin_lock(&clocks_lock); + + if ((--clk->usage) == 0) + (clk->enable)(clk, 0); + + spin_unlock(&clocks_lock); + clk_disable(clk->parent); +} + + +unsigned long clk_get_rate(struct clk *clk) +{ + if (IS_ERR(clk)) + return 0; + + if (clk->rate != 0) + return clk->rate; + + if (clk->get_rate != NULL) + return (clk->get_rate)(clk); + + if (clk->parent != NULL) + return clk_get_rate(clk->parent); + + return clk->rate; +} + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (!IS_ERR(clk) && clk->round_rate) + return (clk->round_rate)(clk, rate); + + return rate; +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret; + + if (IS_ERR(clk)) + return -EINVAL; + + /* We do not default just do a clk->rate = rate as + * the clock may have been made this way by choice. + */ + + WARN_ON(clk->set_rate == NULL); + + if (clk->set_rate == NULL) + return -EINVAL; + + spin_lock(&clocks_lock); + ret = (clk->set_rate)(clk, rate); + spin_unlock(&clocks_lock); + + return ret; +} + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = 0; + + if (IS_ERR(clk)) + return -EINVAL; + + spin_lock(&clocks_lock); + + if (clk->set_parent) + ret = (clk->set_parent)(clk, parent); + + spin_unlock(&clocks_lock); + + return ret; +} + +EXPORT_SYMBOL(clk_get); +EXPORT_SYMBOL(clk_put); +EXPORT_SYMBOL(clk_enable); +EXPORT_SYMBOL(clk_disable); +EXPORT_SYMBOL(clk_get_rate); +EXPORT_SYMBOL(clk_round_rate); +EXPORT_SYMBOL(clk_set_rate); +EXPORT_SYMBOL(clk_get_parent); +EXPORT_SYMBOL(clk_set_parent); + +/* base clocks */ + +static int clk_default_setrate(struct clk *clk, unsigned long rate) +{ + clk->rate = rate; + return 0; +} + +struct clk clk_xtal = { + .name = "xtal", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, +}; + +struct clk clk_ext = { + .name = "ext", + .id = -1, +}; + +struct clk clk_epll = { + .name = "epll", + .id = -1, +}; + +struct clk clk_mpll = { + .name = "mpll", + .id = -1, + .set_rate = clk_default_setrate, +}; + +struct clk clk_upll = { + .name = "upll", + .id = -1, + .parent = NULL, + .ctrlbit = 0, +}; + +struct clk clk_f = { + .name = "fclk", + .id = -1, + .rate = 0, + .parent = &clk_mpll, + .ctrlbit = 0, + .set_rate = clk_default_setrate, +}; + +struct clk clk_h = { + .name = "hclk", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .set_rate = clk_default_setrate, +}; + +struct clk clk_p = { + .name = "pclk", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .set_rate = clk_default_setrate, +}; + +struct clk clk_usb_bus = { + .name = "usb-bus", + .id = -1, + .rate = 0, + .parent = &clk_upll, +}; + + + +struct clk s3c24xx_uclk = { + .name = "uclk", + .id = -1, +}; + +/* initialise the clock system */ + +int s3c24xx_register_clock(struct clk *clk) +{ + clk->owner = THIS_MODULE; + + if (clk->enable == NULL) + clk->enable = clk_null_enable; + + /* add to the list of available clocks */ + + /* Quick check to see if this clock has already been registered. */ + BUG_ON(clk->list.prev != clk->list.next); + + spin_lock(&clocks_lock); + list_add(&clk->list, &clocks); + spin_unlock(&clocks_lock); + + return 0; +} + +int s3c24xx_register_clocks(struct clk **clks, int nr_clks) +{ + int fails = 0; + + for (; nr_clks > 0; nr_clks--, clks++) { + if (s3c24xx_register_clock(*clks) < 0) + fails++; + } + + return fails; +} + +/* initalise all the clocks */ + +int __init s3c24xx_register_baseclocks(unsigned long xtal) +{ + printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n"); + + clk_xtal.rate = xtal; + + /* register our clocks */ + + if (s3c24xx_register_clock(&clk_xtal) < 0) + printk(KERN_ERR "failed to register master xtal\n"); + + if (s3c24xx_register_clock(&clk_mpll) < 0) + printk(KERN_ERR "failed to register mpll clock\n"); + + if (s3c24xx_register_clock(&clk_upll) < 0) + printk(KERN_ERR "failed to register upll clock\n"); + + if (s3c24xx_register_clock(&clk_f) < 0) + printk(KERN_ERR "failed to register cpu fclk\n"); + + if (s3c24xx_register_clock(&clk_h) < 0) + printk(KERN_ERR "failed to register cpu hclk\n"); + + if (s3c24xx_register_clock(&clk_p) < 0) + printk(KERN_ERR "failed to register cpu pclk\n"); + + return 0; +} + diff --git a/arch/arm/plat-s3c/dev-fb.c b/arch/arm/plat-s3c/dev-fb.c new file mode 100644 index 00000000000..0454b8ec02e --- /dev/null +++ b/arch/arm/plat-s3c/dev-fb.c @@ -0,0 +1,72 @@ +/* linux/arch/arm/plat-s3c/dev-fb.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for framebuffer device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> +#include <linux/fb.h> + +#include <mach/map.h> +#include <mach/regs-fb.h> + +#include <plat/fb.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_fb_resource[] = { + [0] = { + .start = S3C_PA_FB, + .end = S3C_PA_FB + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_LCD_VSYNC, + .end = IRQ_LCD_VSYNC, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_LCD_FIFO, + .end = IRQ_LCD_FIFO, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_LCD_SYSTEM, + .end = IRQ_LCD_SYSTEM, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_fb = { + .name = "s3c-fb", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_fb_resource), + .resource = s3c_fb_resource, + .dev.dma_mask = &s3c_device_fb.dev.coherent_dma_mask, + .dev.coherent_dma_mask = 0xffffffffUL, +}; + +void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd) +{ + struct s3c_fb_platdata *npd; + + if (!pd) { + printk(KERN_ERR "%s: no platform data\n", __func__); + return; + } + + npd = kmemdup(pd, sizeof(struct s3c_fb_platdata), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + + s3c_device_fb.dev.platform_data = npd; +} diff --git a/arch/arm/plat-s3c/dev-hsmmc.c b/arch/arm/plat-s3c/dev-hsmmc.c new file mode 100644 index 00000000000..4c05b39810e --- /dev/null +++ b/arch/arm/plat-s3c/dev-hsmmc.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-s3c/dev-hsmmc.c + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for hsmmc devices + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> + +#include <mach/map.h> +#include <plat/sdhci.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +#define S3C_SZ_HSMMC (0x1000) + +static struct resource s3c_hsmmc_resource[] = { + [0] = { + .start = S3C_PA_HSMMC0, + .end = S3C_PA_HSMMC0 + S3C_SZ_HSMMC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_HSMMC0, + .end = IRQ_HSMMC0, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL; + +struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), +}; + +struct platform_device s3c_device_hsmmc0 = { + .name = "s3c-sdhci", + .id = 0, + .num_resources = ARRAY_SIZE(s3c_hsmmc_resource), + .resource = s3c_hsmmc_resource, + .dev = { + .dma_mask = &s3c_device_hsmmc_dmamask, + .coherent_dma_mask = 0xffffffffUL, + .platform_data = &s3c_hsmmc0_def_platdata, + }, +}; + +void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd) +{ + struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata; + + set->max_width = pd->max_width; + + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->cfg_card) + set->cfg_card = pd->cfg_card; +} diff --git a/arch/arm/plat-s3c/dev-hsmmc1.c b/arch/arm/plat-s3c/dev-hsmmc1.c new file mode 100644 index 00000000000..e49bc4cd0ee --- /dev/null +++ b/arch/arm/plat-s3c/dev-hsmmc1.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-s3c/dev-hsmmc1.c + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for hsmmc device 1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> + +#include <mach/map.h> +#include <plat/sdhci.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +#define S3C_SZ_HSMMC (0x1000) + +static struct resource s3c_hsmmc1_resource[] = { + [0] = { + .start = S3C_PA_HSMMC1, + .end = S3C_PA_HSMMC1 + S3C_SZ_HSMMC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_HSMMC1, + .end = IRQ_HSMMC1, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_hsmmc1_dmamask = 0xffffffffUL; + +struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), +}; + +struct platform_device s3c_device_hsmmc1 = { + .name = "s3c-sdhci", + .id = 1, + .num_resources = ARRAY_SIZE(s3c_hsmmc1_resource), + .resource = s3c_hsmmc1_resource, + .dev = { + .dma_mask = &s3c_device_hsmmc1_dmamask, + .coherent_dma_mask = 0xffffffffUL, + .platform_data = &s3c_hsmmc1_def_platdata, + }, +}; + +void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd) +{ + struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata; + + set->max_width = pd->max_width; + + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->cfg_card) + set->cfg_card = pd->cfg_card; +} diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c new file mode 100644 index 00000000000..2c0128c77c6 --- /dev/null +++ b/arch/arm/plat-s3c/dev-i2c0.c @@ -0,0 +1,71 @@ +/* linux/arch/arm/plat-s3c/dev-i2c0.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for i2c device 0 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/map.h> + +#include <plat/regs-iic.h> +#include <plat/iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_i2c_resource[] = { + [0] = { + .start = S3C_PA_IIC, + .end = S3C_PA_IIC + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IIC, + .end = IRQ_IIC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_i2c0 = { + .name = "s3c2410-i2c", +#ifdef CONFIG_S3C_DEV_I2C1 + .id = 0, +#else + .id = -1, +#endif + .num_resources = ARRAY_SIZE(s3c_i2c_resource), + .resource = s3c_i2c_resource, +}; + +static struct s3c2410_platform_i2c default_i2c_data0 __initdata = { + .flags = 0, + .slave_addr = 0x10, + .bus_freq = 100*1000, + .max_freq = 400*1000, + .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON, +}; + +void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) + pd = &default_i2c_data0; + + npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + else if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c0_cfg_gpio; + + s3c_device_i2c0.dev.platform_data = npd; +} diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c new file mode 100644 index 00000000000..9658fb0aec9 --- /dev/null +++ b/arch/arm/plat-s3c/dev-i2c1.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-s3c/dev-i2c1.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for i2c device 1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/map.h> + +#include <plat/regs-iic.h> +#include <plat/iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_i2c_resource[] = { + [0] = { + .start = S3C_PA_IIC1, + .end = S3C_PA_IIC1 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IIC1, + .end = IRQ_IIC1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_i2c1 = { + .name = "s3c2410-i2c", + .id = 1, + .num_resources = ARRAY_SIZE(s3c_i2c_resource), + .resource = s3c_i2c_resource, +}; + +static struct s3c2410_platform_i2c default_i2c_data1 __initdata = { + .flags = 0, + .bus_num = 1, + .slave_addr = 0x10, + .bus_freq = 100*1000, + .max_freq = 400*1000, + .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON, +}; + +void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) + pd = &default_i2c_data1; + + npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + else if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c1_cfg_gpio; + + s3c_device_i2c1.dev.platform_data = npd; +} diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c new file mode 100644 index 00000000000..7642b975a99 --- /dev/null +++ b/arch/arm/plat-s3c/gpio-config.c @@ -0,0 +1,163 @@ +/* linux/arch/arm/plat-s3c/gpio-config.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series GPIO configuration core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <mach/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long flags; + int offset; + int ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + local_irq_save(flags); + ret = s3c_gpio_do_setcfg(chip, offset, config); + local_irq_restore(flags); + + return ret; +} + +int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long flags; + int offset, ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + local_irq_save(flags); + ret = s3c_gpio_do_setpull(chip, offset, pull); + local_irq_restore(flags); + + return ret; +} + +#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX +int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off; + u32 con; + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + + /* Map output to 0, and SFN2 to 1 */ + cfg -= 1; + if (cfg > 1) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x1 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off * 2; + u32 con; + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + if (cfg > 3) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x3 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} +#endif + +#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX +int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio >= 8) + reg -= 4; + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} +#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */ + +#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN +int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup; + + pup = __raw_readl(reg); + pup &= ~(3 << shift); + pup |= pull << shift; + __raw_writel(pup, reg); + + return 0; +} + +s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup = __raw_readl(reg); + + pup >>= shift; + pup &= 0x3; + return (__force s3c_gpio_pull_t)pup; +} +#endif diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c new file mode 100644 index 00000000000..d71dd6d9ce5 --- /dev/null +++ b/arch/arm/plat-s3c/gpio.c @@ -0,0 +1,147 @@ +/* linux/arch/arm/plat-s3c/gpio.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series GPIO core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <plat/gpio-core.h> + +#ifdef CONFIG_S3C_GPIO_TRACK +struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; + +static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip) +{ + unsigned int gpn; + int i; + + gpn = chip->chip.base; + for (i = 0; i < chip->chip.ngpio; i++, gpn++) { + BUG_ON(gpn > ARRAY_SIZE(s3c_gpios)); + s3c_gpios[gpn] = chip; + } +} +#endif /* CONFIG_S3C_GPIO_TRACK */ + +/* Default routines for controlling GPIO, based on the original S3C24XX + * GPIO functions which deal with the case where each gpio bank of the + * chip is as following: + * + * base + 0x00: Control register, 2 bits per gpio + * gpio n: 2 bits starting at (2*n) + * 00 = input, 01 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n +*/ + +static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long con; + + local_irq_save(flags); + + con = __raw_readl(base + 0x00); + con &= ~(3 << (offset * 2)); + + __raw_writel(con, base + 0x00); + + local_irq_restore(flags); + return 0; +} + +static int s3c_gpiolib_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + unsigned long con; + + local_irq_save(flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + __raw_writel(dat, base + 0x04); + + con = __raw_readl(base + 0x00); + con &= ~(3 << (offset * 2)); + con |= 1 << (offset * 2); + + __raw_writel(con, base + 0x00); + __raw_writel(dat, base + 0x04); + + local_irq_restore(flags); + return 0; +} + +static void s3c_gpiolib_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + + local_irq_save(flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + __raw_writel(dat, base + 0x04); + + local_irq_restore(flags); +} + +static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + unsigned long val; + + val = __raw_readl(ourchip->base + 0x04); + val >>= offset; + val &= 1; + + return val; +} + +__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) +{ + struct gpio_chip *gc = &chip->chip; + int ret; + + BUG_ON(!chip->base); + BUG_ON(!gc->label); + BUG_ON(!gc->ngpio); + + if (!gc->direction_input) + gc->direction_input = s3c_gpiolib_input; + if (!gc->direction_output) + gc->direction_output = s3c_gpiolib_output; + if (!gc->set) + gc->set = s3c_gpiolib_set; + if (!gc->get) + gc->get = s3c_gpiolib_get; + + /* gpiochip_add() prints own failure message on error. */ + ret = gpiochip_add(gc); + if (ret >= 0) + s3c_gpiolib_track(chip); +} diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/plat-s3c/include/mach/io.h new file mode 100644 index 00000000000..f6a53631b66 --- /dev/null +++ b/arch/arm/plat-s3c/include/mach/io.h @@ -0,0 +1,18 @@ +/* arch/arm/plat-s3c/include/mach/io.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben-linux@fluff.org> + * + * Default IO routines for plat-s3c based systems, such as S3C24A0 + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +/* No current ISA/PCI bus support. */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/plat-s3c/include/mach/timex.h new file mode 100644 index 00000000000..2a425ed0a7e --- /dev/null +++ b/arch/arm/plat-s3c/include/mach/timex.h @@ -0,0 +1,26 @@ +/* arch/arm/mach-s3c2410/include/mach/timex.h + * + * Copyright (c) 2003-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - time parameters + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it + * a variable is useless. It seems as long as we make our timers an + * exact multiple of HZ, any value that makes a 1->1 correspondence + * for the time conversion functions to/from jiffies is acceptable. +*/ + + +#define CLOCK_TICK_RATE 12000000 + + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/plat-s3c/include/mach/vmalloc.h b/arch/arm/plat-s3c/include/mach/vmalloc.h new file mode 100644 index 00000000000..bfd2ca6e307 --- /dev/null +++ b/arch/arm/plat-s3c/include/mach/vmalloc.h @@ -0,0 +1,20 @@ +/* arch/arm/plat-s3c/include/mach/vmalloc.h + * + * from arch/arm/mach-iop3xx/include/mach/vmalloc.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 vmalloc definition +*/ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END (0xE0000000) + +#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h new file mode 100644 index 00000000000..43df2a404b0 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/adc.h @@ -0,0 +1,29 @@ +/* arch/arm/plat-s3c/include/plat/adc.h + * + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simnte.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX ADC driver information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_ADC_H +#define __ASM_PLAT_ADC_H __FILE__ + +struct s3c_adc_client; + +extern int s3c_adc_start(struct s3c_adc_client *client, + unsigned int channel, unsigned int nr_samples); + +extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev, + void (*select)(unsigned selected), + void (*conv)(unsigned d0, unsigned d1), + unsigned int is_ts); + +extern void s3c_adc_release(struct s3c_adc_client *client); + +#endif /* __ASM_PLAT_ADC_H */ diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h new file mode 100644 index 00000000000..a10622eed43 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/clock.h @@ -0,0 +1,88 @@ +/* linux/arch/arm/plat-s3c/include/plat/clock.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * Written by Ben Dooks, <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/spinlock.h> + +struct clk { + struct list_head list; + struct module *owner; + struct clk *parent; + const char *name; + int id; + int usage; + unsigned long rate; + unsigned long ctrlbit; + + int (*enable)(struct clk *, int enable); + int (*set_rate)(struct clk *c, unsigned long rate); + unsigned long (*get_rate)(struct clk *c); + unsigned long (*round_rate)(struct clk *c, unsigned long rate); + int (*set_parent)(struct clk *c, struct clk *parent); +}; + +/* other clocks which may be registered by board support */ + +extern struct clk s3c24xx_dclk0; +extern struct clk s3c24xx_dclk1; +extern struct clk s3c24xx_clkout0; +extern struct clk s3c24xx_clkout1; +extern struct clk s3c24xx_uclk; + +extern struct clk clk_usb_bus; + +/* core clock support */ + +extern struct clk clk_f; +extern struct clk clk_h; +extern struct clk clk_p; +extern struct clk clk_mpll; +extern struct clk clk_upll; +extern struct clk clk_epll; +extern struct clk clk_xtal; +extern struct clk clk_ext; + +/* S3C64XX specific clocks */ +extern struct clk clk_27m; +extern struct clk clk_48m; + +/* exports for arch/arm/mach-s3c2410 + * + * Please DO NOT use these outside of arch/arm/mach-s3c2410 +*/ + +extern spinlock_t clocks_lock; + +extern int s3c2410_clkcon_enable(struct clk *clk, int enable); + +extern int s3c24xx_register_clock(struct clk *clk); +extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); + +extern int s3c24xx_register_baseclocks(unsigned long xtal); + +extern void s3c64xx_register_clocks(void); + +extern void s3c24xx_setup_clocks(unsigned long fclk, + unsigned long hclk, + unsigned long pclk); + +extern void s3c2410_setup_clocks(void); +extern void s3c2412_setup_clocks(void); +extern void s3c244x_setup_clocks(void); +extern void s3c2443_setup_clocks(void); + +/* S3C64XX specific functions and clocks */ + +extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable); + +/* Init for pwm clock code */ + +extern void s3c_pwmclk_init(void); + diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h new file mode 100644 index 00000000000..c86a13307e9 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h @@ -0,0 +1,94 @@ +/* arch/arm/plat-s3c/include/plat/cpu-freq.h + * + * Copyright (c) 2006,2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C CPU frequency scaling support - driver and board + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/cpufreq.h> + +struct s3c_cpufreq_info; +struct s3c_cpufreq_board; +struct s3c_iotimings; + +struct s3c_freq { + unsigned long fclk; + unsigned long armclk; + unsigned long hclk_tns; /* in 10ths of ns */ + unsigned long hclk; + unsigned long pclk; +}; + +/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the + * notification can use this information that is not provided by just + * having the core frequency alone. + */ + +struct s3c_cpufreq_freqs { + struct cpufreq_freqs freqs; + struct s3c_freq old; + struct s3c_freq new; +}; + +#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs) + +struct s3c_clkdivs { + int p_divisor; /* fclk / pclk */ + int h_divisor; /* fclk / hclk */ + int arm_divisor; /* not all cpus have this. */ + unsigned char dvs; /* using dvs mode to arm. */ +}; + +#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s)) + +struct s3c_pllval { + unsigned long freq; + unsigned long pll_reg; +}; + +struct s3c_cpufreq_config { + struct s3c_freq freq; + struct s3c_pllval pll; + struct s3c_clkdivs divs; + struct s3c_cpufreq_info *info; /* for core, not drivers */ + struct s3c_cpufreq_board *board; +}; + +/* s3c_cpufreq_board + * + * per-board configuraton information, such as memory refresh and + * how to initialise IO timings. + */ +struct s3c_cpufreq_board { + unsigned int refresh; /* refresh period in ns */ + unsigned int auto_io:1; /* automatically init io timings. */ + unsigned int need_io:1; /* set if needs io timing support. */ + + /* any non-zero field in here is taken as an upper limit. */ + struct s3c_freq max; /* frequency limits */ +}; + +/* Things depending on frequency scaling. */ +#ifdef CONFIG_CPU_FREQ_S3C +#define __init_or_cpufreq +#else +#define __init_or_cpufreq __init +#endif + +/* Board functions */ + +#ifdef CONFIG_CPU_FREQ_S3C +extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board); +#else + +static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) +{ + return 0; +} +#endif /* CONFIG_CPU_FREQ_S3C */ diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h new file mode 100644 index 00000000000..e62ae0fcfe5 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/cpu.h @@ -0,0 +1,71 @@ +/* linux/arch/arm/plat-s3c/include/plat/cpu.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for S3C24XX CPU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* todo - fix when rmk changes iodescs to use `void __iomem *` */ + +#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } + +#ifndef MHZ +#define MHZ (1000*1000) +#endif + +#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000) + +/* forward declaration */ +struct s3c24xx_uart_resources; +struct platform_device; +struct s3c2410_uartcfg; +struct map_desc; + +/* per-cpu initialisation function table. */ + +struct cpu_table { + unsigned long idcode; + unsigned long idmask; + void (*map_io)(void); + void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no); + void (*init_clocks)(int xtal); + int (*init)(void); + const char *name; +}; + +extern void s3c_init_cpu(unsigned long idcode, + struct cpu_table *cpus, unsigned int cputab_size); + +/* core initialisation functions */ + +extern void s3c24xx_init_irq(void); +extern void s3c64xx_init_irq(u32 vic0, u32 vic1); + +extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); +extern void s3c64xx_init_io(struct map_desc *mach_desc, int size); + +extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c24xx_init_clocks(int xtal); + +extern void s3c24xx_init_uartdevs(char *name, + struct s3c24xx_uart_resources *res, + struct s3c2410_uartcfg *cfg, int no); + +/* timer for 2410/2440 */ + +struct sys_timer; +extern struct sys_timer s3c24xx_timer; + +/* system device classes */ + +extern struct sysdev_class s3c2410_sysclass; +extern struct sysdev_class s3c2412_sysclass; +extern struct sysdev_class s3c2440_sysclass; +extern struct sysdev_class s3c2442_sysclass; +extern struct sysdev_class s3c2443_sysclass; diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-s3c/include/plat/debug-macro.S index 4aa7e2e6c00..3634d4e3708 100644 --- a/arch/arm/plat-s3c/include/plat/debug-macro.S +++ b/arch/arm/plat-s3c/include/plat/debug-macro.S @@ -20,7 +20,7 @@ .endm #ifndef fifo_level -#define fifo_level fifo_level_s3c2410 +#define fifo_level fifo_level_s3c2440 #endif .macro fifo_full_s3c2440 rd, rx diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h new file mode 100644 index 00000000000..6b1b5231511 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -0,0 +1,54 @@ +/* linux/include/asm-arm/plat-s3c24xx/devs.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for s3c2410 standard platform devices + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ +#include <linux/platform_device.h> + +struct s3c24xx_uart_resources { + struct resource *resources; + unsigned long nr_resources; +}; + +extern struct s3c24xx_uart_resources s3c2410_uart_resources[]; +extern struct s3c24xx_uart_resources s3c64xx_uart_resources[]; + +extern struct platform_device *s3c24xx_uart_devs[]; +extern struct platform_device *s3c24xx_uart_src[]; + +extern struct platform_device s3c_device_timer[]; + +extern struct platform_device s3c_device_fb; +extern struct platform_device s3c_device_usb; +extern struct platform_device s3c_device_lcd; +extern struct platform_device s3c_device_wdt; +extern struct platform_device s3c_device_i2c0; +extern struct platform_device s3c_device_i2c1; +extern struct platform_device s3c_device_iis; +extern struct platform_device s3c_device_rtc; +extern struct platform_device s3c_device_adc; +extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_hsmmc0; +extern struct platform_device s3c_device_hsmmc1; +extern struct platform_device s3c_device_hsmmc2; + +extern struct platform_device s3c_device_spi0; +extern struct platform_device s3c_device_spi1; + +extern struct platform_device s3c_device_nand; + +extern struct platform_device s3c_device_usbgadget; + +/* s3c2440 specific devices */ + +#ifdef CONFIG_CPU_S3C2440 + +extern struct platform_device s3c_device_camif; + +#endif diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-s3c/include/plat/fb.h new file mode 100644 index 00000000000..214ff561b0d --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/fb.h @@ -0,0 +1,73 @@ +/* linux/arch/arm/plat-s3c/include/plat/fb.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - FB platform data definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C_FB_H +#define __PLAT_S3C_FB_H __FILE__ + +/** + * struct s3c_fb_pd_win - per window setup data + * @win_mode: The display parameters to initialise (not for window 0) + * @virtual_x: The virtual X size. + * @virtual_y: The virtual Y size. + */ +struct s3c_fb_pd_win { + struct fb_videomode win_mode; + + unsigned short default_bpp; + unsigned short max_bpp; + unsigned short virtual_x; + unsigned short virtual_y; +}; + +/** + * struct s3c_fb_platdata - S3C driver platform specific information + * @setup_gpio: Setup the external GPIO pins to the right state to transfer + * the data from the display system to the connected display + * device. + * @vidcon0: The base vidcon0 values to control the panel data format. + * @vidcon1: The base vidcon1 values to control the panel data output. + * @win: The setup data for each hardware window, or NULL for unused. + * @display_mode: The LCD output display mode. + * + * The platform data supplies the video driver with all the information + * it requires to work with the display(s) attached to the machine. It + * controls the initial mode, the number of display windows (0 is always + * the base framebuffer) that are initialised etc. + * + */ +struct s3c_fb_platdata { + void (*setup_gpio)(void); + + struct s3c_fb_pd_win *win[S3C_FB_MAX_WIN]; + + u32 vidcon0; + u32 vidcon1; +}; + +/** + * s3c_fb_set_platdata() - Setup the FB device with platform data. + * @pd: The platform data to set. The data is copied from the passed structure + * so the machine data can mark the data __initdata so that any unused + * machines will end up dumping their data at runtime. + */ +extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd); + +/** + * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD + * + * Initialise the GPIO for an 24bpp LCD display on the RGB interface. + */ +extern void s3c64xx_fb_gpio_setup_24bpp(void); + +#endif /* __PLAT_S3C_FB_H */ diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h new file mode 100644 index 00000000000..652e2bbdaa2 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h @@ -0,0 +1,176 @@ +/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - GPIO pin configuration helper definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* This is meant for core cpu support, machine or other driver files + * should not be including this header. + */ + +#ifndef __PLAT_GPIO_CFG_HELPERS_H +#define __PLAT_GPIO_CFG_HELPERS_H __FILE__ + +/* As a note, all gpio configuration functions are entered exclusively, either + * with the relevant lock held or the system prevented from doing anything else + * by disabling interrupts. +*/ + +static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int config) +{ + return (chip->config->set_config)(chip, off, config); +} + +static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + return (chip->config->set_pull)(chip, off, pull); +} + +/** + * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has two bits of configuration per gpio, which have the following + * functions: + * 00 = input + * 01 = output + * 1x = special function +*/ +extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has one bit of configuration for the gpio, where setting the bit + * means the pin is in special function mode and unset means output. +*/ +extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependant on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a seperate set of functions for + * each case. +*/ +extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + + +/* Pull-{up,down} resistor controls. + * + * S3C2410,S3C2440,S3C24A0 = Pull-UP, + * S3C2412,S3C2413 = Pull-Down + * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef] + * S3C2443 = Pull-Both [not same as S3C6400] + */ + +/** + * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with one + * bit configuring the presence of a pull-up resistor. + */ +extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none + * @chip: The gpio chip that is being configured + * @off: The offset for the GPIO being configured + * @param: pull: The pull mode being requested + * + * This is a helper function for the case where we have GPIOs with one + * bit configuring the presence of a pull-down resistor. + */ +extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with two + * bits configuring the presence of a pull resistor, in the following + * order: + * 00 = No pull resistor connected + * 01 = Pull-up resistor connected + * 10 = Pull-down resistor connected + */ +extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + + +/** + * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none + * @chip: The gpio chip that the GPIO pin belongs to + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-{up,down} resistor for the + * given GPIO in the same case as s3c_gpio_setpull_upown. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, + unsigned int off); + +/** + * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with two + * bits configuring the presence of a pull resistor, in the following + * order: + * 00 = Pull-up resistor connected + * 10 = Pull-down resistor connected + * x1 = No pull up resistor + */ +extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors + * @chip: The gpio chip that the GPIO pin belongs to. + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-{up,down} resistor for the + * given GPIO in the same case as s3c_gpio_setpull_upown. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off); + +#endif /* __PLAT_GPIO_CFG_HELPERS_H */ + diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg.h b/arch/arm/plat-s3c/include/plat/gpio-cfg.h new file mode 100644 index 00000000000..29cd6a86cad --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/gpio-cfg.h @@ -0,0 +1,110 @@ +/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - GPIO pin configuration + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* This file contains the necessary definitions to get the basic gpio + * pin configuration done such as setting a pin to input or output or + * changing the pull-{up,down} configurations. + */ + +/* Note, this interface is being added to the s3c64xx arch first and will + * be added to the s3c24xx systems later. + */ + +#ifndef __PLAT_GPIO_CFG_H +#define __PLAT_GPIO_CFG_H __FILE__ + +typedef unsigned int __bitwise__ s3c_gpio_pull_t; + +/* forward declaration if gpio-core.h hasn't been included */ +struct s3c_gpio_chip; + +/** + * struct s3c_gpio_cfg GPIO configuration + * @cfg_eint: Configuration setting when used for external interrupt source + * @get_pull: Read the current pull configuration for the GPIO + * @set_pull: Set the current pull configuraiton for the GPIO + * @set_config: Set the current configuration for the GPIO + * @get_config: Read the current configuration for the GPIO + * + * Each chip can have more than one type of GPIO bank available and some + * have different capabilites even when they have the same control register + * layouts. Provide an point to vector control routine and provide any + * per-bank configuration information that other systems such as the + * external interrupt code will need. + */ +struct s3c_gpio_cfg { + unsigned int cfg_eint; + + s3c_gpio_pull_t (*get_pull)(struct s3c_gpio_chip *chip, unsigned offs); + int (*set_pull)(struct s3c_gpio_chip *chip, unsigned offs, + s3c_gpio_pull_t pull); + + unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs); + int (*set_config)(struct s3c_gpio_chip *chip, unsigned offs, + unsigned config); +}; + +#define S3C_GPIO_SPECIAL_MARK (0xfffffff0) +#define S3C_GPIO_SPECIAL(x) (S3C_GPIO_SPECIAL_MARK | (x)) + +/* Defines for generic pin configurations */ +#define S3C_GPIO_INPUT (S3C_GPIO_SPECIAL(0)) +#define S3C_GPIO_OUTPUT (S3C_GPIO_SPECIAL(1)) +#define S3C_GPIO_SFN(x) (S3C_GPIO_SPECIAL(x)) + +#define s3c_gpio_is_cfg_special(_cfg) \ + (((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK) + +/** + * s3c_gpio_cfgpin() - Change the GPIO function of a pin. + * @pin pin The pin number to configure. + * @pin to The configuration for the pin's function. + * + * Configure which function is actually connected to the external + * pin, such as an gpio input, output or some form of special function + * connected to an internal peripheral block. + */ +extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to); + +/* Define values for the pull-{up,down} available for each gpio pin. + * + * These values control the state of the weak pull-{up,down} resistors + * available on most pins on the S3C series. Not all chips support both + * up or down settings, and it may be dependant on the chip that is being + * used to whether the particular mode is available. + */ +#define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00) +#define S3C_GPIO_PULL_DOWN ((__force s3c_gpio_pull_t)0x01) +#define S3C_GPIO_PULL_UP ((__force s3c_gpio_pull_t)0x02) + +/** + * s3c_gpio_setpull() - set the state of a gpio pin pull resistor + * @pin: The pin number to configure the pull resistor. + * @pull: The configuration for the pull resistor. + * + * This function sets the state of the pull-{up,down} resistor for the + * specified pin. It will return 0 if successfull, or a negative error + * code if the pin cannot support the requested pull setting. +*/ +extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_getpull() - get the pull resistor state of a gpio pin + * @pin: The pin number to get the settings for + * + * Read the pull resistor value for the specified pin. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); + +#endif /* __PLAT_GPIO_CFG_H */ diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h new file mode 100644 index 00000000000..2fc60a580ac --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/gpio-core.h @@ -0,0 +1,77 @@ +/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h + * + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - GPIO core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Define the core gpiolib support functions that the s3c platforms may + * need to extend or change depending on the hardware and the s3c chip + * selected at build or found at run time. + * + * These definitions are not intended for driver inclusion, there is + * nothing here that should not live outside the platform and core + * specific code. +*/ + +struct s3c_gpio_cfg; + +/** + * struct s3c_gpio_chip - wrapper for specific implementation of gpio + * @chip: The chip structure to be exported via gpiolib. + * @base: The base pointer to the gpio configuration registers. + * @config: special function and pull-resistor control information. + * + * This wrapper provides the necessary information for the Samsung + * specific gpios being registered with gpiolib. + */ +struct s3c_gpio_chip { + struct gpio_chip chip; + struct s3c_gpio_cfg *config; + void __iomem *base; +}; + +static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc) +{ + return container_of(gpc, struct s3c_gpio_chip, chip); +} + +/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip. + * @chip: The chip to register + * + * This is a wrapper to gpiochip_add() that takes our specific gpio chip + * information and makes the necessary alterations for the platform and + * notes the information for use with the configuration systems and any + * other parts of the system. + */ +extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); + +/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios + * for use with the configuration calls, and other parts of the s3c gpiolib + * support code. + * + * Not all s3c support code will need this, as some configurations of cpu + * may only support one or two different configuration options and have an + * easy gpio to s3c_gpio_chip mapping function. If this is the case, then + * the machine support file should provide its own s3c_gpiolib_getchip() + * and any other necessary functions. + */ + +#ifdef CONFIG_S3C_GPIO_TRACK +extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; + +static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip) +{ + return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL; +} +#else +/* machine specific code should provide s3c_gpiolib_getchip */ + +static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { } +#endif diff --git a/arch/arm/plat-s3c/include/plat/iic-core.h b/arch/arm/plat-s3c/include/plat/iic-core.h new file mode 100644 index 00000000000..36397ca2096 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/iic-core.h @@ -0,0 +1,35 @@ +/* arch/arm/mach-s3c2410/include/mach/iic-core.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - I2C Controller core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_IIC_CORE_H +#define __ASM_ARCH_IIC_CORE_H __FILE__ + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c_i2c0_setname(char *name) +{ + /* currently this device is always compiled in */ + s3c_device_i2c0.name = name; +} + +static inline void s3c_i2c1_setname(char *name) +{ +#ifdef CONFIG_S3C_DEV_I2C1 + s3c_device_i2c1.name = name; +#endif +} + +#endif /* __ASM_ARCH_IIC_H */ diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h new file mode 100644 index 00000000000..dc1dfcb9bc6 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/iic.h @@ -0,0 +1,57 @@ +/* arch/arm/mach-s3c2410/include/mach/iic.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - I2C Controller platfrom_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_IIC_H +#define __ASM_ARCH_IIC_H __FILE__ + +#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */ + +/* Notes: + * 1) All frequencies are expressed in Hz + * 2) A value of zero is `do not care` +*/ + +struct s3c2410_platform_i2c { + int bus_num; /* bus number to use */ + unsigned int flags; + unsigned int slave_addr; /* slave address for controller */ + unsigned long bus_freq; /* standard bus frequency */ + unsigned long max_freq; /* max frequency for the bus */ + unsigned long min_freq; /* min frequency for the bus */ + unsigned int sda_delay; /* pclks (s3c2440 only) */ + + void (*cfg_gpio)(struct platform_device *dev); +}; + +/** + * s3c_i2c0_set_platdata - set platform data for i2c0 device + * @i2c: The platform data to set, or NULL for default data. + * + * Register the given platform data for use with the i2c0 device. This + * call copies the platform data, so the caller can use __initdata for + * their copy. + * + * This call will set cfg_gpio if is null to the default platform + * implementation. + * + * Any user of s3c_device_i2c0 should call this, even if it is with + * NULL to ensure that the device is given the default platform data + * as the driver will no longer carry defaults. + */ +extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c); + +/* defined by architecture to configure gpio */ +extern void s3c_i2c0_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c1_cfg_gpio(struct platform_device *dev); + +#endif /* __ASM_ARCH_IIC_H */ diff --git a/arch/arm/plat-s3c/include/plat/map.h b/arch/arm/plat-s3c/include/plat/map-base.h index b84289d32a5..b84289d32a5 100644 --- a/arch/arm/plat-s3c/include/plat/map.h +++ b/arch/arm/plat-s3c/include/plat/map-base.h diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h new file mode 100644 index 00000000000..f4dcd14af05 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/nand.h @@ -0,0 +1,50 @@ +/* arch/arm/mach-s3c2410/include/mach/nand.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - NAND device controller platfrom_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* struct s3c2410_nand_set + * + * define an set of one or more nand chips registered with an unique mtd + * + * nr_chips = number of chips in this set + * nr_partitions = number of partitions pointed to be partitoons (or zero) + * name = name of set (optional) + * nr_map = map for low-layer logical to physical chip numbers (option) + * partitions = mtd partition list +*/ + +struct s3c2410_nand_set { + unsigned int disable_ecc : 1; + + int nr_chips; + int nr_partitions; + char *name; + int *nr_map; + struct mtd_partition *partitions; + struct nand_ecclayout *ecc_layout; +}; + +struct s3c2410_platform_nand { + /* timing information for controller, all times in nanoseconds */ + + int tacls; /* time for active CLE/ALE to nWE/nOE */ + int twrph0; /* active time for nWE/nOE */ + int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ + + unsigned int ignore_unset_ecc : 1; + + int nr_sets; + struct s3c2410_nand_set *sets; + + void (*select_chip)(struct s3c2410_nand_set *, + int chip); +}; + diff --git a/arch/arm/plat-s3c/include/plat/regs-ac97.h b/arch/arm/plat-s3c/include/plat/regs-ac97.h new file mode 100644 index 00000000000..c3878f7acb8 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-ac97.h @@ -0,0 +1,67 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h + * + * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2440 AC97 Controller +*/ + +#ifndef __ASM_ARCH_REGS_AC97_H +#define __ASM_ARCH_REGS_AC97_H __FILE__ + +#define S3C_AC97_GLBCTRL (0x00) + +#define S3C_AC97_GLBCTRL_CODECREADYIE (1<<22) +#define S3C_AC97_GLBCTRL_PCMOUTURIE (1<<21) +#define S3C_AC97_GLBCTRL_PCMINORIE (1<<20) +#define S3C_AC97_GLBCTRL_MICINORIE (1<<19) +#define S3C_AC97_GLBCTRL_PCMOUTTIE (1<<18) +#define S3C_AC97_GLBCTRL_PCMINTIE (1<<17) +#define S3C_AC97_GLBCTRL_MICINTIE (1<<16) +#define S3C_AC97_GLBCTRL_PCMOUTTM_OFF (0<<12) +#define S3C_AC97_GLBCTRL_PCMOUTTM_PIO (1<<12) +#define S3C_AC97_GLBCTRL_PCMOUTTM_DMA (2<<12) +#define S3C_AC97_GLBCTRL_PCMOUTTM_MASK (3<<12) +#define S3C_AC97_GLBCTRL_PCMINTM_OFF (0<<10) +#define S3C_AC97_GLBCTRL_PCMINTM_PIO (1<<10) +#define S3C_AC97_GLBCTRL_PCMINTM_DMA (2<<10) +#define S3C_AC97_GLBCTRL_PCMINTM_MASK (3<<10) +#define S3C_AC97_GLBCTRL_MICINTM_OFF (0<<8) +#define S3C_AC97_GLBCTRL_MICINTM_PIO (1<<8) +#define S3C_AC97_GLBCTRL_MICINTM_DMA (2<<8) +#define S3C_AC97_GLBCTRL_MICINTM_MASK (3<<8) +#define S3C_AC97_GLBCTRL_TRANSFERDATAENABLE (1<<3) +#define S3C_AC97_GLBCTRL_ACLINKON (1<<2) +#define S3C_AC97_GLBCTRL_WARMRESET (1<<1) +#define S3C_AC97_GLBCTRL_COLDRESET (1<<0) + +#define S3C_AC97_GLBSTAT (0x04) + +#define S3C_AC97_GLBSTAT_CODECREADY (1<<22) +#define S3C_AC97_GLBSTAT_PCMOUTUR (1<<21) +#define S3C_AC97_GLBSTAT_PCMINORI (1<<20) +#define S3C_AC97_GLBSTAT_MICINORI (1<<19) +#define S3C_AC97_GLBSTAT_PCMOUTTI (1<<18) +#define S3C_AC97_GLBSTAT_PCMINTI (1<<17) +#define S3C_AC97_GLBSTAT_MICINTI (1<<16) +#define S3C_AC97_GLBSTAT_MAINSTATE_IDLE (0<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_INIT (1<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_READY (2<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE (3<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_LP (4<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_WARM (5<<0) + +#define S3C_AC97_CODEC_CMD (0x08) + +#define S3C_AC97_CODEC_CMD_READ (1<<23) + +#define S3C_AC97_STAT (0x0c) +#define S3C_AC97_PCM_ADDR (0x10) +#define S3C_AC97_PCM_DATA (0x18) +#define S3C_AC97_MIC_DATA (0x1C) + +#endif /* __ASM_ARCH_REGS_AC97_H */ diff --git a/arch/arm/plat-s3c/include/plat/regs-fb.h b/arch/arm/plat-s3c/include/plat/regs-fb.h new file mode 100644 index 00000000000..e9ee599d430 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-fb.h @@ -0,0 +1,366 @@ +/* arch/arm/plat-s3c/include/plat/regs-fb.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - new-style framebuffer register definitions + * + * This is the register set for the new style framebuffer interface + * found from the S3C2443 onwards into the S3C2416, S3C2450 and the + * S3C64XX series such as the S3C6400 and S3C6410. + * + * The file does not contain the cpu specific items which are based on + * whichever architecture is selected, it only contains the core of the + * register set. See <mach/regs-fb.h> to get the specifics. + * + * Note, we changed to using regs-fb.h as it avoids any clashes with + * the original regs-lcd.h so out of the way of regs-lcd.h as well as + * indicating the newer block is much more than just an LCD interface. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Please do not include this file directly, use <mach/regs-fb.h> to + * ensure all the localised SoC support is included as necessary. +*/ + +/* VIDCON0 */ + +#define VIDCON0 (0x00) +#define VIDCON0_INTERLACE (1 << 29) +#define VIDCON0_VIDOUT_MASK (0x3 << 26) +#define VIDCON0_VIDOUT_SHIFT (26) +#define VIDCON0_VIDOUT_RGB (0x0 << 26) +#define VIDCON0_VIDOUT_TV (0x1 << 26) +#define VIDCON0_VIDOUT_I80_LDI0 (0x2 << 26) +#define VIDCON0_VIDOUT_I80_LDI1 (0x3 << 26) + +#define VIDCON0_L1_DATA_MASK (0x7 << 23) +#define VIDCON0_L1_DATA_SHIFT (23) +#define VIDCON0_L1_DATA_16BPP (0x0 << 23) +#define VIDCON0_L1_DATA_18BPP16 (0x1 << 23) +#define VIDCON0_L1_DATA_18BPP9 (0x2 << 23) +#define VIDCON0_L1_DATA_24BPP (0x3 << 23) +#define VIDCON0_L1_DATA_18BPP (0x4 << 23) +#define VIDCON0_L1_DATA_16BPP8 (0x5 << 23) + +#define VIDCON0_L0_DATA_MASK (0x7 << 20) +#define VIDCON0_L0_DATA_SHIFT (20) +#define VIDCON0_L0_DATA_16BPP (0x0 << 20) +#define VIDCON0_L0_DATA_18BPP16 (0x1 << 20) +#define VIDCON0_L0_DATA_18BPP9 (0x2 << 20) +#define VIDCON0_L0_DATA_24BPP (0x3 << 20) +#define VIDCON0_L0_DATA_18BPP (0x4 << 20) +#define VIDCON0_L0_DATA_16BPP8 (0x5 << 20) + +#define VIDCON0_PNRMODE_MASK (0x3 << 17) +#define VIDCON0_PNRMODE_SHIFT (17) +#define VIDCON0_PNRMODE_RGB (0x0 << 17) +#define VIDCON0_PNRMODE_BGR (0x1 << 17) +#define VIDCON0_PNRMODE_SERIAL_RGB (0x2 << 17) +#define VIDCON0_PNRMODE_SERIAL_BGR (0x3 << 17) + +#define VIDCON0_CLKVALUP (1 << 16) +#define VIDCON0_CLKVAL_F_MASK (0xff << 6) +#define VIDCON0_CLKVAL_F_SHIFT (6) +#define VIDCON0_CLKVAL_F_LIMIT (0xff) +#define VIDCON0_CLKVAL_F(_x) ((_x) << 6) +#define VIDCON0_VLCKFREE (1 << 5) +#define VIDCON0_CLKDIR (1 << 4) + +#define VIDCON0_CLKSEL_MASK (0x3 << 2) +#define VIDCON0_CLKSEL_SHIFT (2) +#define VIDCON0_CLKSEL_HCLK (0x0 << 2) +#define VIDCON0_CLKSEL_LCD (0x1 << 2) +#define VIDCON0_CLKSEL_27M (0x3 << 2) + +#define VIDCON0_ENVID (1 << 1) +#define VIDCON0_ENVID_F (1 << 0) + +#define VIDCON1 (0x04) +#define VIDCON1_LINECNT_MASK (0x7ff << 16) +#define VIDCON1_LINECNT_SHIFT (16) +#define VIDCON1_LINECNT_GET(_v) (((_v) >> 16) & 0x7ff) +#define VIDCON1_VSTATUS_MASK (0x3 << 13) +#define VIDCON1_VSTATUS_SHIFT (13) +#define VIDCON1_VSTATUS_VSYNC (0x0 << 13) +#define VIDCON1_VSTATUS_BACKPORCH (0x1 << 13) +#define VIDCON1_VSTATUS_ACTIVE (0x2 << 13) +#define VIDCON1_VSTATUS_FRONTPORCH (0x0 << 13) + +#define VIDCON1_INV_VCLK (1 << 7) +#define VIDCON1_INV_HSYNC (1 << 6) +#define VIDCON1_INV_VSYNC (1 << 5) +#define VIDCON1_INV_VDEN (1 << 4) + +/* VIDCON2 */ + +#define VIDCON2 (0x08) +#define VIDCON2_EN601 (1 << 23) +#define VIDCON2_TVFMTSEL_SW (1 << 14) + +#define VIDCON2_TVFMTSEL1_MASK (0x3 << 12) +#define VIDCON2_TVFMTSEL1_SHIFT (12) +#define VIDCON2_TVFMTSEL1_RGB (0x0 << 12) +#define VIDCON2_TVFMTSEL1_YUV422 (0x1 << 12) +#define VIDCON2_TVFMTSEL1_YUV444 (0x2 << 12) + +#define VIDCON2_ORGYCbCr (1 << 8) +#define VIDCON2_YUVORDCrCb (1 << 7) + +/* VIDTCON0 */ + +#define VIDTCON0_VBPDE_MASK (0xff << 24) +#define VIDTCON0_VBPDE_SHIFT (24) +#define VIDTCON0_VBPDE_LIMIT (0xff) +#define VIDTCON0_VBPDE(_x) ((_x) << 24) + +#define VIDTCON0_VBPD_MASK (0xff << 16) +#define VIDTCON0_VBPD_SHIFT (16) +#define VIDTCON0_VBPD_LIMIT (0xff) +#define VIDTCON0_VBPD(_x) ((_x) << 16) + +#define VIDTCON0_VFPD_MASK (0xff << 8) +#define VIDTCON0_VFPD_SHIFT (8) +#define VIDTCON0_VFPD_LIMIT (0xff) +#define VIDTCON0_VFPD(_x) ((_x) << 8) + +#define VIDTCON0_VSPW_MASK (0xff << 0) +#define VIDTCON0_VSPW_SHIFT (0) +#define VIDTCON0_VSPW_LIMIT (0xff) +#define VIDTCON0_VSPW(_x) ((_x) << 0) + +/* VIDTCON1 */ + +#define VIDTCON1_VFPDE_MASK (0xff << 24) +#define VIDTCON1_VFPDE_SHIFT (24) +#define VIDTCON1_VFPDE_LIMIT (0xff) +#define VIDTCON1_VFPDE(_x) ((_x) << 24) + +#define VIDTCON1_HBPD_MASK (0xff << 16) +#define VIDTCON1_HBPD_SHIFT (16) +#define VIDTCON1_HBPD_LIMIT (0xff) +#define VIDTCON1_HBPD(_x) ((_x) << 16) + +#define VIDTCON1_HFPD_MASK (0xff << 8) +#define VIDTCON1_HFPD_SHIFT (8) +#define VIDTCON1_HFPD_LIMIT (0xff) +#define VIDTCON1_HFPD(_x) ((_x) << 8) + +#define VIDTCON1_HSPW_MASK (0xff << 0) +#define VIDTCON1_HSPW_SHIFT (0) +#define VIDTCON1_HSPW_LIMIT (0xff) +#define VIDTCON1_HSPW(_x) ((_x) << 0) + +#define VIDTCON2 (0x18) +#define VIDTCON2_LINEVAL_MASK (0x7ff << 11) +#define VIDTCON2_LINEVAL_SHIFT (11) +#define VIDTCON2_LINEVAL_LIMIT (0x7ff) +#define VIDTCON2_LINEVAL(_x) ((_x) << 11) + +#define VIDTCON2_HOZVAL_MASK (0x7ff << 0) +#define VIDTCON2_HOZVAL_SHIFT (0) +#define VIDTCON2_HOZVAL_LIMIT (0x7ff) +#define VIDTCON2_HOZVAL(_x) ((_x) << 0) + +/* WINCONx */ + + +#define WINCONx_BITSWP (1 << 18) +#define WINCONx_BYTSWP (1 << 17) +#define WINCONx_HAWSWP (1 << 16) +#define WINCONx_BURSTLEN_MASK (0x3 << 9) +#define WINCONx_BURSTLEN_SHIFT (9) +#define WINCONx_BURSTLEN_16WORD (0x0 << 9) +#define WINCONx_BURSTLEN_8WORD (0x1 << 9) +#define WINCONx_BURSTLEN_4WORD (0x2 << 9) + +#define WINCONx_ENWIN (1 << 0) +#define WINCON0_BPPMODE_MASK (0xf << 2) +#define WINCON0_BPPMODE_SHIFT (2) +#define WINCON0_BPPMODE_1BPP (0x0 << 2) +#define WINCON0_BPPMODE_2BPP (0x1 << 2) +#define WINCON0_BPPMODE_4BPP (0x2 << 2) +#define WINCON0_BPPMODE_8BPP_PALETTE (0x3 << 2) +#define WINCON0_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON0_BPPMODE_16BPP_1555 (0x7 << 2) +#define WINCON0_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON0_BPPMODE_24BPP_888 (0xb << 2) + +#define WINCON1_BLD_PIX (1 << 6) + +#define WINCON1_ALPHA_SEL (1 << 1) +#define WINCON1_BPPMODE_MASK (0xf << 2) +#define WINCON1_BPPMODE_SHIFT (2) +#define WINCON1_BPPMODE_1BPP (0x0 << 2) +#define WINCON1_BPPMODE_2BPP (0x1 << 2) +#define WINCON1_BPPMODE_4BPP (0x2 << 2) +#define WINCON1_BPPMODE_8BPP_PALETTE (0x3 << 2) +#define WINCON1_BPPMODE_8BPP_1232 (0x4 << 2) +#define WINCON1_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON1_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON1_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON1_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON1_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON1_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON1_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON1_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON1_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON1_BPPMODE_28BPP_A4888 (0xd << 2) + + +#define VIDOSDxA_TOPLEFT_X_MASK (0x7ff << 11) +#define VIDOSDxA_TOPLEFT_X_SHIFT (11) +#define VIDOSDxA_TOPLEFT_X_LIMIT (0x7ff) +#define VIDOSDxA_TOPLEFT_X(_x) ((_x) << 11) + +#define VIDOSDxA_TOPLEFT_Y_MASK (0x7ff << 0) +#define VIDOSDxA_TOPLEFT_Y_SHIFT (0) +#define VIDOSDxA_TOPLEFT_Y_LIMIT (0x7ff) +#define VIDOSDxA_TOPLEFT_Y(_x) ((_x) << 0) + +#define VIDOSDxB_BOTRIGHT_X_MASK (0x7ff << 11) +#define VIDOSDxB_BOTRIGHT_X_SHIFT (11) +#define VIDOSDxB_BOTRIGHT_X_LIMIT (0x7ff) +#define VIDOSDxB_BOTRIGHT_X(_x) ((_x) << 11) + +#define VIDOSDxB_BOTRIGHT_Y_MASK (0x7ff << 0) +#define VIDOSDxB_BOTRIGHT_Y_SHIFT (0) +#define VIDOSDxB_BOTRIGHT_Y_LIMIT (0x7ff) +#define VIDOSDxB_BOTRIGHT_Y(_x) ((_x) << 0) + +/* For VIDOSD[1..4]C */ +#define VIDISD14C_ALPHA0_R(_x) ((_x) << 20) +#define VIDISD14C_ALPHA0_G_MASK (0xf << 16) +#define VIDISD14C_ALPHA0_G_SHIFT (16) +#define VIDISD14C_ALPHA0_G_LIMIT (0xf) +#define VIDISD14C_ALPHA0_G(_x) ((_x) << 16) +#define VIDISD14C_ALPHA0_B_MASK (0xf << 12) +#define VIDISD14C_ALPHA0_B_SHIFT (12) +#define VIDISD14C_ALPHA0_B_LIMIT (0xf) +#define VIDISD14C_ALPHA0_B(_x) ((_x) << 12) +#define VIDISD14C_ALPHA1_R_MASK (0xf << 8) +#define VIDISD14C_ALPHA1_R_SHIFT (8) +#define VIDISD14C_ALPHA1_R_LIMIT (0xf) +#define VIDISD14C_ALPHA1_R(_x) ((_x) << 8) +#define VIDISD14C_ALPHA1_G_MASK (0xf << 4) +#define VIDISD14C_ALPHA1_G_SHIFT (4) +#define VIDISD14C_ALPHA1_G_LIMIT (0xf) +#define VIDISD14C_ALPHA1_G(_x) ((_x) << 4) +#define VIDISD14C_ALPHA1_B_MASK (0xf << 0) +#define VIDISD14C_ALPHA1_B_SHIFT (0) +#define VIDISD14C_ALPHA1_B_LIMIT (0xf) +#define VIDISD14C_ALPHA1_B(_x) ((_x) << 0) + +/* Video buffer addresses */ +#define VIDW_BUF_START(_buff) (0xA0 + ((_buff) * 8)) +#define VIDW_BUF_START1(_buff) (0xA4 + ((_buff) * 8)) +#define VIDW_BUF_END(_buff) (0xD0 + ((_buff) * 8)) +#define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8)) +#define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4)) + +#define VIDW_BUF_SIZE_OFFSET_MASK (0x1fff << 13) +#define VIDW_BUF_SIZE_OFFSET_SHIFT (13) +#define VIDW_BUF_SIZE_OFFSET_LIMIT (0x1fff) +#define VIDW_BUF_SIZE_OFFSET(_x) ((_x) << 13) + +#define VIDW_BUF_SIZE_PAGEWIDTH_MASK (0x1fff << 0) +#define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT (0) +#define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT (0x1fff) +#define VIDW_BUF_SIZE_PAGEWIDTH(_x) ((_x) << 0) + +/* Interrupt controls and status */ + +#define VIDINTCON0_FIFOINTERVAL_MASK (0x3f << 20) +#define VIDINTCON0_FIFOINTERVAL_SHIFT (20) +#define VIDINTCON0_FIFOINTERVAL_LIMIT (0x3f) +#define VIDINTCON0_FIFOINTERVAL(_x) ((_x) << 20) + +#define VIDINTCON0_INT_SYSMAINCON (1 << 19) +#define VIDINTCON0_INT_SYSSUBCON (1 << 18) +#define VIDINTCON0_INT_I80IFDONE (1 << 17) + +#define VIDINTCON0_FRAMESEL0_MASK (0x3 << 15) +#define VIDINTCON0_FRAMESEL0_SHIFT (15) +#define VIDINTCON0_FRAMESEL0_BACKPORCH (0x0 << 15) +#define VIDINTCON0_FRAMESEL0_VSYNC (0x1 << 15) +#define VIDINTCON0_FRAMESEL0_ACTIVE (0x2 << 15) +#define VIDINTCON0_FRAMESEL0_FRONTPORCH (0x3 << 15) + +#define VIDINTCON0_FRAMESEL1 (1 << 14) +#define VIDINTCON0_FRAMESEL1_NONE (0x0 << 14) +#define VIDINTCON0_FRAMESEL1_BACKPORCH (0x1 << 14) +#define VIDINTCON0_FRAMESEL1_VSYNC (0x2 << 14) +#define VIDINTCON0_FRAMESEL1_FRONTPORCH (0x3 << 14) + +#define VIDINTCON0_INT_FRAME (1 << 12) +#define VIDINTCON0_FIFIOSEL_MASK (0x7f << 5) +#define VIDINTCON0_FIFIOSEL_SHIFT (5) +#define VIDINTCON0_FIFIOSEL_WINDOW0 (0x1 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW1 (0x2 << 5) + +#define VIDINTCON0_FIFOLEVEL_MASK (0x7 << 2) +#define VIDINTCON0_FIFOLEVEL_SHIFT (2) +#define VIDINTCON0_FIFOLEVEL_TO25PC (0x0 << 2) +#define VIDINTCON0_FIFOLEVEL_TO50PC (0x1 << 2) +#define VIDINTCON0_FIFOLEVEL_TO75PC (0x2 << 2) +#define VIDINTCON0_FIFOLEVEL_EMPTY (0x3 << 2) +#define VIDINTCON0_FIFOLEVEL_FULL (0x4 << 2) + +#define VIDINTCON0_INT_FIFO_MASK (0x3 << 0) +#define VIDINTCON0_INT_FIFO_SHIFT (0) +#define VIDINTCON0_INT_ENABLE (1 << 0) + +#define VIDINTCON1 (0x134) +#define VIDINTCON1_INT_I180 (1 << 2) +#define VIDINTCON1_INT_FRAME (1 << 1) +#define VIDINTCON1_INT_FIFO (1 << 0) + +/* Window colour-key control registers */ + +#define WxKEYCON0_KEYBL_EN (1 << 26) +#define WxKEYCON0_KEYEN_F (1 << 25) +#define WxKEYCON0_DIRCON (1 << 24) +#define WxKEYCON0_COMPKEY_MASK (0xffffff << 0) +#define WxKEYCON0_COMPKEY_SHIFT (0) +#define WxKEYCON0_COMPKEY_LIMIT (0xffffff) +#define WxKEYCON0_COMPKEY(_x) ((_x) << 0) +#define WxKEYCON1_COLVAL_MASK (0xffffff << 0) +#define WxKEYCON1_COLVAL_SHIFT (0) +#define WxKEYCON1_COLVAL_LIMIT (0xffffff) +#define WxKEYCON1_COLVAL(_x) ((_x) << 0) + + +/* Window blanking (MAP) */ + +#define WINxMAP_MAP (1 << 24) +#define WINxMAP_MAP_COLOUR_MASK (0xffffff << 0) +#define WINxMAP_MAP_COLOUR_SHIFT (0) +#define WINxMAP_MAP_COLOUR_LIMIT (0xffffff) +#define WINxMAP_MAP_COLOUR(_x) ((_x) << 0) + +#define WPALCON_PAL_UPDATE (1 << 9) +#define WPALCON_W1PAL_MASK (0x7 << 3) +#define WPALCON_W1PAL_SHIFT (3) +#define WPALCON_W1PAL_25BPP_A888 (0x0 << 3) +#define WPALCON_W1PAL_24BPP (0x1 << 3) +#define WPALCON_W1PAL_19BPP_A666 (0x2 << 3) +#define WPALCON_W1PAL_18BPP_A665 (0x3 << 3) +#define WPALCON_W1PAL_18BPP (0x4 << 3) +#define WPALCON_W1PAL_16BPP_A555 (0x5 << 3) +#define WPALCON_W1PAL_16BPP_565 (0x6 << 3) + +#define WPALCON_W0PAL_MASK (0x7 << 0) +#define WPALCON_W0PAL_SHIFT (0) +#define WPALCON_W0PAL_25BPP_A888 (0x0 << 0) +#define WPALCON_W0PAL_24BPP (0x1 << 0) +#define WPALCON_W0PAL_19BPP_A666 (0x2 << 0) +#define WPALCON_W0PAL_18BPP_A665 (0x3 << 0) +#define WPALCON_W0PAL_18BPP (0x4 << 0) +#define WPALCON_W0PAL_16BPP_A555 (0x5 << 0) +#define WPALCON_W0PAL_16BPP_565 (0x6 << 0) + diff --git a/arch/arm/plat-s3c/include/plat/regs-iic.h b/arch/arm/plat-s3c/include/plat/regs-iic.h new file mode 100644 index 00000000000..2f7c17de8ac --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-iic.h @@ -0,0 +1,56 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-iic.h + * + * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 I2C Controller +*/ + +#ifndef __ASM_ARCH_REGS_IIC_H +#define __ASM_ARCH_REGS_IIC_H __FILE__ + +/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */ + +#define S3C2410_IICREG(x) (x) + +#define S3C2410_IICCON S3C2410_IICREG(0x00) +#define S3C2410_IICSTAT S3C2410_IICREG(0x04) +#define S3C2410_IICADD S3C2410_IICREG(0x08) +#define S3C2410_IICDS S3C2410_IICREG(0x0C) +#define S3C2440_IICLC S3C2410_IICREG(0x10) + +#define S3C2410_IICCON_ACKEN (1<<7) +#define S3C2410_IICCON_TXDIV_16 (0<<6) +#define S3C2410_IICCON_TXDIV_512 (1<<6) +#define S3C2410_IICCON_IRQEN (1<<5) +#define S3C2410_IICCON_IRQPEND (1<<4) +#define S3C2410_IICCON_SCALE(x) ((x)&15) +#define S3C2410_IICCON_SCALEMASK (0xf) + +#define S3C2410_IICSTAT_MASTER_RX (2<<6) +#define S3C2410_IICSTAT_MASTER_TX (3<<6) +#define S3C2410_IICSTAT_SLAVE_RX (0<<6) +#define S3C2410_IICSTAT_SLAVE_TX (1<<6) +#define S3C2410_IICSTAT_MODEMASK (3<<6) + +#define S3C2410_IICSTAT_START (1<<5) +#define S3C2410_IICSTAT_BUSBUSY (1<<5) +#define S3C2410_IICSTAT_TXRXEN (1<<4) +#define S3C2410_IICSTAT_ARBITR (1<<3) +#define S3C2410_IICSTAT_ASSLAVE (1<<2) +#define S3C2410_IICSTAT_ADDR0 (1<<1) +#define S3C2410_IICSTAT_LASTBIT (1<<0) + +#define S3C2410_IICLC_SDA_DELAY0 (0 << 0) +#define S3C2410_IICLC_SDA_DELAY5 (1 << 0) +#define S3C2410_IICLC_SDA_DELAY10 (2 << 0) +#define S3C2410_IICLC_SDA_DELAY15 (3 << 0) +#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0) + +#define S3C2410_IICLC_FILTER_ON (1<<2) + +#endif /* __ASM_ARCH_REGS_IIC_H */ diff --git a/arch/arm/plat-s3c/include/plat/regs-irqtype.h b/arch/arm/plat-s3c/include/plat/regs-irqtype.h new file mode 100644 index 00000000000..c63cd3fc5ad --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-irqtype.h @@ -0,0 +1,21 @@ +/* arch/arm/plat-s3c/include/plat/regs-irqtype.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C - IRQ detection types. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including + * the S3C64XX +*/ +#define S3C2410_EXTINT_LOWLEV (0x00) +#define S3C2410_EXTINT_HILEV (0x01) +#define S3C2410_EXTINT_FALLEDGE (0x02) +#define S3C2410_EXTINT_RISEEDGE (0x04) +#define S3C2410_EXTINT_BOTHEDGE (0x06) diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-s3c/include/plat/regs-nand.h new file mode 100644 index 00000000000..b2caa4bca27 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-nand.h @@ -0,0 +1,123 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-nand.h + * + * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 NAND register definitions +*/ + +#ifndef __ASM_ARM_REGS_NAND +#define __ASM_ARM_REGS_NAND + + +#define S3C2410_NFREG(x) (x) + +#define S3C2410_NFCONF S3C2410_NFREG(0x00) +#define S3C2410_NFCMD S3C2410_NFREG(0x04) +#define S3C2410_NFADDR S3C2410_NFREG(0x08) +#define S3C2410_NFDATA S3C2410_NFREG(0x0C) +#define S3C2410_NFSTAT S3C2410_NFREG(0x10) +#define S3C2410_NFECC S3C2410_NFREG(0x14) + +#define S3C2440_NFCONT S3C2410_NFREG(0x04) +#define S3C2440_NFCMD S3C2410_NFREG(0x08) +#define S3C2440_NFADDR S3C2410_NFREG(0x0C) +#define S3C2440_NFDATA S3C2410_NFREG(0x10) +#define S3C2440_NFECCD0 S3C2410_NFREG(0x14) +#define S3C2440_NFECCD1 S3C2410_NFREG(0x18) +#define S3C2440_NFECCD S3C2410_NFREG(0x1C) +#define S3C2440_NFSTAT S3C2410_NFREG(0x20) +#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24) +#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28) +#define S3C2440_NFMECC0 S3C2410_NFREG(0x2C) +#define S3C2440_NFMECC1 S3C2410_NFREG(0x30) +#define S3C2440_NFSECC S3C2410_NFREG(0x34) +#define S3C2440_NFSBLK S3C2410_NFREG(0x38) +#define S3C2440_NFEBLK S3C2410_NFREG(0x3C) + +#define S3C2412_NFSBLK S3C2410_NFREG(0x20) +#define S3C2412_NFEBLK S3C2410_NFREG(0x24) +#define S3C2412_NFSTAT S3C2410_NFREG(0x28) +#define S3C2412_NFMECC_ERR0 S3C2410_NFREG(0x2C) +#define S3C2412_NFMECC_ERR1 S3C2410_NFREG(0x30) +#define S3C2412_NFMECC0 S3C2410_NFREG(0x34) +#define S3C2412_NFMECC1 S3C2410_NFREG(0x38) +#define S3C2412_NFSECC S3C2410_NFREG(0x3C) + +#define S3C2410_NFCONF_EN (1<<15) +#define S3C2410_NFCONF_512BYTE (1<<14) +#define S3C2410_NFCONF_4STEP (1<<13) +#define S3C2410_NFCONF_INITECC (1<<12) +#define S3C2410_NFCONF_nFCE (1<<11) +#define S3C2410_NFCONF_TACLS(x) ((x)<<8) +#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4) +#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0) + +#define S3C2410_NFSTAT_BUSY (1<<0) + +#define S3C2440_NFCONF_BUSWIDTH_8 (0<<0) +#define S3C2440_NFCONF_BUSWIDTH_16 (1<<0) +#define S3C2440_NFCONF_ADVFLASH (1<<3) +#define S3C2440_NFCONF_TACLS(x) ((x)<<12) +#define S3C2440_NFCONF_TWRPH0(x) ((x)<<8) +#define S3C2440_NFCONF_TWRPH1(x) ((x)<<4) + +#define S3C2440_NFCONT_LOCKTIGHT (1<<13) +#define S3C2440_NFCONT_SOFTLOCK (1<<12) +#define S3C2440_NFCONT_ILLEGALACC_EN (1<<10) +#define S3C2440_NFCONT_RNBINT_EN (1<<9) +#define S3C2440_NFCONT_RN_FALLING (1<<8) +#define S3C2440_NFCONT_SPARE_ECCLOCK (1<<6) +#define S3C2440_NFCONT_MAIN_ECCLOCK (1<<5) +#define S3C2440_NFCONT_INITECC (1<<4) +#define S3C2440_NFCONT_nFCE (1<<1) +#define S3C2440_NFCONT_ENABLE (1<<0) + +#define S3C2440_NFSTAT_READY (1<<0) +#define S3C2440_NFSTAT_nCE (1<<1) +#define S3C2440_NFSTAT_RnB_CHANGE (1<<2) +#define S3C2440_NFSTAT_ILLEGAL_ACCESS (1<<3) + +#define S3C2412_NFCONF_NANDBOOT (1<<31) +#define S3C2412_NFCONF_ECCCLKCON (1<<30) +#define S3C2412_NFCONF_ECC_MLC (1<<24) +#define S3C2412_NFCONF_TACLS_MASK (7<<12) /* 1 extra bit of Tacls */ + +#define S3C2412_NFCONT_ECC4_DIRWR (1<<18) +#define S3C2412_NFCONT_LOCKTIGHT (1<<17) +#define S3C2412_NFCONT_SOFTLOCK (1<<16) +#define S3C2412_NFCONT_ECC4_ENCINT (1<<13) +#define S3C2412_NFCONT_ECC4_DECINT (1<<12) +#define S3C2412_NFCONT_MAIN_ECC_LOCK (1<<7) +#define S3C2412_NFCONT_INIT_MAIN_ECC (1<<5) +#define S3C2412_NFCONT_nFCE1 (1<<2) +#define S3C2412_NFCONT_nFCE0 (1<<1) + +#define S3C2412_NFSTAT_ECC_ENCDONE (1<<7) +#define S3C2412_NFSTAT_ECC_DECDONE (1<<6) +#define S3C2412_NFSTAT_ILLEGAL_ACCESS (1<<5) +#define S3C2412_NFSTAT_RnB_CHANGE (1<<4) +#define S3C2412_NFSTAT_nFCE1 (1<<3) +#define S3C2412_NFSTAT_nFCE0 (1<<2) +#define S3C2412_NFSTAT_Res1 (1<<1) +#define S3C2412_NFSTAT_READY (1<<0) + +#define S3C2412_NFECCERR_SERRDATA(x) (((x) >> 21) & 0xf) +#define S3C2412_NFECCERR_SERRBIT(x) (((x) >> 18) & 0x7) +#define S3C2412_NFECCERR_MERRDATA(x) (((x) >> 7) & 0x3ff) +#define S3C2412_NFECCERR_MERRBIT(x) (((x) >> 4) & 0x7) +#define S3C2412_NFECCERR_SPARE_ERR(x) (((x) >> 2) & 0x3) +#define S3C2412_NFECCERR_MAIN_ERR(x) (((x) >> 2) & 0x3) +#define S3C2412_NFECCERR_NONE (0) +#define S3C2412_NFECCERR_1BIT (1) +#define S3C2412_NFECCERR_MULTIBIT (2) +#define S3C2412_NFECCERR_ECCAREA (3) + + + +#endif /* __ASM_ARM_REGS_NAND */ + diff --git a/arch/arm/plat-s3c/include/plat/regs-rtc.h b/arch/arm/plat-s3c/include/plat/regs-rtc.h new file mode 100644 index 00000000000..d5837cf8e40 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-rtc.h @@ -0,0 +1,61 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Internal RTC register definition +*/ + +#ifndef __ASM_ARCH_REGS_RTC_H +#define __ASM_ARCH_REGS_RTC_H __FILE__ + +#define S3C2410_RTCREG(x) (x) + +#define S3C2410_RTCCON S3C2410_RTCREG(0x40) +#define S3C2410_RTCCON_RTCEN (1<<0) +#define S3C2410_RTCCON_CLKSEL (1<<1) +#define S3C2410_RTCCON_CNTSEL (1<<2) +#define S3C2410_RTCCON_CLKRST (1<<3) + +#define S3C2410_TICNT S3C2410_RTCREG(0x44) +#define S3C2410_TICNT_ENABLE (1<<7) + +#define S3C2410_RTCALM S3C2410_RTCREG(0x50) +#define S3C2410_RTCALM_ALMEN (1<<6) +#define S3C2410_RTCALM_YEAREN (1<<5) +#define S3C2410_RTCALM_MONEN (1<<4) +#define S3C2410_RTCALM_DAYEN (1<<3) +#define S3C2410_RTCALM_HOUREN (1<<2) +#define S3C2410_RTCALM_MINEN (1<<1) +#define S3C2410_RTCALM_SECEN (1<<0) + +#define S3C2410_RTCALM_ALL \ + S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\ + S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\ + S3C2410_RTCALM_SECEN + + +#define S3C2410_ALMSEC S3C2410_RTCREG(0x54) +#define S3C2410_ALMMIN S3C2410_RTCREG(0x58) +#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c) + +#define S3C2410_ALMDATE S3C2410_RTCREG(0x60) +#define S3C2410_ALMMON S3C2410_RTCREG(0x64) +#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68) + +#define S3C2410_RTCRST S3C2410_RTCREG(0x6c) + +#define S3C2410_RTCSEC S3C2410_RTCREG(0x70) +#define S3C2410_RTCMIN S3C2410_RTCREG(0x74) +#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78) +#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c) +#define S3C2410_RTCDAY S3C2410_RTCREG(0x80) +#define S3C2410_RTCMON S3C2410_RTCREG(0x84) +#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88) + + +#endif /* __ASM_ARCH_REGS_RTC_H */ diff --git a/arch/arm/plat-s3c/include/plat/regs-sdhci.h b/arch/arm/plat-s3c/include/plat/regs-sdhci.h new file mode 100644 index 00000000000..e34049ad44c --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-sdhci.h @@ -0,0 +1,87 @@ +/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - SDHCI (HSMMC) register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C_SDHCI_REGS_H +#define __PLAT_S3C_SDHCI_REGS_H __FILE__ + +#define S3C_SDHCI_CONTROL2 (0x80) +#define S3C_SDHCI_CONTROL3 (0x84) +#define S3C64XX_SDHCI_CONTROL4 (0x8C) + +#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) +#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) +#define S3C_SDHCI_CTRL2_CDINVRXD3 (1 << 29) +#define S3C_SDHCI_CTRL2_SLCARDOUT (1 << 28) + +#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) +#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) +#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) + +#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) +#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16) +#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) + +#define S3C_SDHCI_CTRL2_ENFBCLKTX (1 << 15) +#define S3C_SDHCI_CTRL2_ENFBCLKRX (1 << 14) +#define S3C_SDHCI_CTRL2_SDCDSEL (1 << 13) +#define S3C_SDHCI_CTRL2_SDSIGPC (1 << 12) +#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) + +#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9) +#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9) + +#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) +#define S3C_SDHCI_CTRL2_RWAITMODE (1 << 7) +#define S3C_SDHCI_CTRL2_DISBUFRD (1 << 6) +#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4) +#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4) +#define S3C_SDHCI_CTRL2_PWRSYNC (1 << 3) +#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) +#define S3C_SDHCI_CTRL2_HWINITFIN (1 << 0) + +#define S3C_SDHCI_CTRL3_FCSEL3 (1 << 31) +#define S3C_SDHCI_CTRL3_FCSEL2 (1 << 23) +#define S3C_SDHCI_CTRL3_FCSEL1 (1 << 15) +#define S3C_SDHCI_CTRL3_FCSEL0 (1 << 7) + +#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24) +#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24) +#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24) + +#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16) +#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16) +#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16) + +#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8) +#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8) +#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8) + +#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0) +#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0) +#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0) + +#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16) + +#define S3C64XX_SDHCI_CONTROL4_BUSY (1) + +#endif /* __PLAT_S3C_SDHCI_REGS_H */ diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h index a0daa647b92..487d7d2a7e1 100644 --- a/arch/arm/plat-s3c/include/plat/regs-serial.h +++ b/arch/arm/plat-s3c/include/plat/regs-serial.h @@ -77,6 +77,12 @@ #define S3C2440_UCON_FCLK (3<<10) #define S3C2443_UCON_EPLL (3<<10) +#define S3C6400_UCON_CLKMASK (3<<10) +#define S3C6400_UCON_PCLK (0<<10) +#define S3C6400_UCON_PCLK2 (2<<10) +#define S3C6400_UCON_UCLK0 (1<<10) +#define S3C6400_UCON_UCLK1 (3<<10) + #define S3C2440_UCON2_FCLK_EN (1<<15) #define S3C2440_UCON0_DIVMASK (15 << 12) #define S3C2440_UCON1_DIVMASK (15 << 12) @@ -149,6 +155,14 @@ #define S3C2410_UFSTAT_RXMASK (15<<0) #define S3C2410_UFSTAT_RXSHIFT (0) +/* UFSTAT S3C24A0 */ +#define S3C24A0_UFSTAT_TXFULL (1 << 14) +#define S3C24A0_UFSTAT_RXFULL (1 << 6) +#define S3C24A0_UFSTAT_TXMASK (63 << 8) +#define S3C24A0_UFSTAT_TXSHIFT (8) +#define S3C24A0_UFSTAT_RXMASK (63) +#define S3C24A0_UFSTAT_RXSHIFT (0) + /* UFSTAT S3C2443 same as S3C2440 */ #define S3C2440_UFSTAT_TXFULL (1<<14) #define S3C2440_UFSTAT_RXFULL (1<<6) @@ -224,7 +238,7 @@ struct s3c2410_uartcfg { * or platform_add_device() before the console_initcall() */ -extern struct platform_device *s3c24xx_uart_devs[3]; +extern struct platform_device *s3c24xx_uart_devs[4]; #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-s3c/include/plat/regs-timer.h index cc0eedd53e3..d097d92f8cc 100644 --- a/arch/arm/plat-s3c/include/plat/regs-timer.h +++ b/arch/arm/plat-s3c/include/plat/regs-timer.h @@ -10,7 +10,6 @@ * S3C2410 Timer configuration */ - #ifndef __ASM_ARCH_REGS_TIMER_H #define __ASM_ARCH_REGS_TIMER_H @@ -21,6 +20,8 @@ #define S3C2410_TCFG1 S3C_TIMERREG(0x04) #define S3C2410_TCON S3C_TIMERREG(0x08) +#define S3C64XX_TINT_CSTAT S3C_TIMERREG(0x44) + #define S3C2410_TCFG_PRESCALER0_MASK (255<<0) #define S3C2410_TCFG_PRESCALER1_MASK (255<<8) #define S3C2410_TCFG_PRESCALER1_SHIFT (8) @@ -72,6 +73,14 @@ #define S3C2410_TCFG1_MUX_TCLK (4<<0) #define S3C2410_TCFG1_MUX_MASK (15<<0) +#define S3C64XX_TCFG1_MUX_DIV1 (0<<0) +#define S3C64XX_TCFG1_MUX_DIV2 (1<<0) +#define S3C64XX_TCFG1_MUX_DIV4 (2<<0) +#define S3C64XX_TCFG1_MUX_DIV8 (3<<0) +#define S3C64XX_TCFG1_MUX_DIV16 (4<<0) +#define S3C64XX_TCFG1_MUX_TCLK (5<<0) /* 3 sets of TCLK */ +#define S3C64XX_TCFG1_MUX_MASK (15<<0) + #define S3C2410_TCFG1_SHIFT(x) ((x) * 4) /* for each timer, we have an count buffer, an compare buffer and diff --git a/arch/arm/plat-s3c/include/plat/regs-watchdog.h b/arch/arm/plat-s3c/include/plat/regs-watchdog.h new file mode 100644 index 00000000000..4938492470f --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-watchdog.h @@ -0,0 +1,41 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Watchdog timer control +*/ + + +#ifndef __ASM_ARCH_REGS_WATCHDOG_H +#define __ASM_ARCH_REGS_WATCHDOG_H + +#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG) + +#define S3C2410_WTCON S3C_WDOGREG(0x00) +#define S3C2410_WTDAT S3C_WDOGREG(0x04) +#define S3C2410_WTCNT S3C_WDOGREG(0x08) + +/* the watchdog can either generate a reset pulse, or an + * interrupt. + */ + +#define S3C2410_WTCON_RSTEN (0x01) +#define S3C2410_WTCON_INTEN (1<<2) +#define S3C2410_WTCON_ENABLE (1<<5) + +#define S3C2410_WTCON_DIV16 (0<<3) +#define S3C2410_WTCON_DIV32 (1<<3) +#define S3C2410_WTCON_DIV64 (2<<3) +#define S3C2410_WTCON_DIV128 (3<<3) + +#define S3C2410_WTCON_PRESCALE(x) ((x) << 8) +#define S3C2410_WTCON_PRESCALE_MASK (0xff00) + +#endif /* __ASM_ARCH_REGS_WATCHDOG_H */ + + diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h new file mode 100644 index 00000000000..c4ca3920ca4 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/sdhci.h @@ -0,0 +1,108 @@ +/* linux/arch/arm/plat-s3c/include/plat/sdhci.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - SDHCI (HSMMC) platform data definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C_SDHCI_H +#define __PLAT_S3C_SDHCI_H __FILE__ + +struct platform_device; +struct mmc_host; +struct mmc_card; +struct mmc_ios; + +/** + * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI + * @max_width: The maximum number of data bits supported. + * @host_caps: Standard MMC host capabilities bit field. + * @cfg_gpio: Configure the GPIO for a specific card bit-width + * @cfg_card: Configure the interface for a specific card and speed. This + * is necessary the controllers and/or GPIO blocks require the + * changing of driver-strength and other controls dependant on + * the card and speed of operation. + * + * Initialisation data specific to either the machine or the platform + * for the device driver to use or call-back when configuring gpio or + * card speed information. +*/ +struct s3c_sdhci_platdata { + unsigned int max_width; + unsigned int host_caps; + + char **clocks; /* set of clock sources */ + + void (*cfg_gpio)(struct platform_device *dev, int width); + void (*cfg_card)(struct platform_device *dev, + void __iomem *regbase, + struct mmc_ios *ios, + struct mmc_card *card); +}; + +/** + * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device. + * @pd: Platform data to register to device. + * + * Register the given platform data for use withe S3C SDHCI device. + * The call will copy the platform data, so the board definitions can + * make the structure itself __initdata. + */ +extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd); +extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd); + +/* Default platform data, exported so that per-cpu initialisation can + * set the correct one when there are more than one cpu type selected. +*/ + +extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata; +extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; + +/* Helper function availablity */ + +#ifdef CONFIG_S3C6410_SETUP_SDHCI +extern char *s3c6410_hsmmc_clksrcs[4]; + +extern void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *, int w); + +extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card); + +#ifdef CONFIG_S3C_DEV_HSMMC +static inline void s3c6410_default_sdhci0(void) +{ + s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = s3c6410_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card; +} +#else +static inline void s3c6410_default_sdhci0(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC */ + +#ifdef CONFIG_S3C_DEV_HSMMC1 +static inline void s3c6410_default_sdhci1(void) +{ + s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = s3c6410_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card; +} +#else +static inline void s3c6410_default_sdhci1(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC1 */ + +#else +static inline void s3c6410_default_sdhci0(void) { } +static inline void s3c6410_default_sdhci1(void) { } +#endif /* CONFIG_S3C6410_SETUP_SDHCI */ + +#endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h index 4df006b9cc1..6061de87f22 100644 --- a/arch/arm/plat-s3c/include/plat/uncompress.h +++ b/arch/arm/plat-s3c/include/plat/uncompress.h @@ -28,7 +28,7 @@ static void arch_detect_cpu(void); /* defines for UART registers */ #include <plat/regs-serial.h> -#include <asm/plat-s3c/regs-watchdog.h> +#include <plat/regs-watchdog.h> /* working in physical space... */ #undef S3C2410_WDOGREG @@ -37,7 +37,7 @@ static void arch_detect_cpu(void); /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) -#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT) +#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT) static __inline__ void uart_wr(unsigned int reg, unsigned int val) @@ -139,6 +139,28 @@ static void arch_decomp_error(const char *x) static void error(char *err); +#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO +static inline void arch_enable_uart_fifo(void) +{ + u32 fifocon = uart_rd(S3C2410_UFCON); + + if (!(fifocon & S3C2410_UFCON_FIFOMODE)) { + fifocon |= S3C2410_UFCON_RESETBOTH; + uart_wr(S3C2410_UFCON, fifocon); + + /* wait for fifo reset to complete */ + while (1) { + fifocon = uart_rd(S3C2410_UFCON); + if (!(fifocon & S3C2410_UFCON_RESETBOTH)) + break; + } + } +} +#else +#define arch_enable_uart_fifo() do { } while(0) +#endif + + static void arch_decomp_setup(void) { @@ -149,6 +171,12 @@ arch_decomp_setup(void) arch_detect_cpu(); arch_decomp_wdog_start(); + + /* Enable the UART FIFOs if they where not enabled and our + * configuration says we should turn them on. + */ + + arch_enable_uart_fifo(); } diff --git a/arch/arm/plat-s3c/init.c b/arch/arm/plat-s3c/init.c new file mode 100644 index 00000000000..6790edfaca6 --- /dev/null +++ b/arch/arm/plat-s3c/init.c @@ -0,0 +1,160 @@ +/* linux/arch/arm/plat-s3c/init.c + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series CPU initialisation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <mach/hardware.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> + +#include <plat/regs-serial.h> + +static struct cpu_table *cpu; + +static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode, + struct cpu_table *tab, + unsigned int count) +{ + for (; count != 0; count--, tab++) { + if ((idcode & tab->idmask) == tab->idcode) + return tab; + } + + return NULL; +} + +void __init s3c_init_cpu(unsigned long idcode, + struct cpu_table *cputab, unsigned int cputab_size) +{ + cpu = s3c_lookup_cpu(idcode, cputab, cputab_size); + + if (cpu == NULL) { + printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode); + panic("Unknown S3C24XX CPU"); + } + + printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode); + + if (cpu->map_io == NULL || cpu->init == NULL) { + printk(KERN_ERR "CPU %s support not enabled\n", cpu->name); + panic("Unsupported Samsung CPU"); + } + + cpu->map_io(); +} + +/* s3c24xx_init_clocks + * + * Initialise the clock subsystem and associated information from the + * given master crystal value. + * + * xtal = 0 -> use default PLL crystal value (normally 12MHz) + * != 0 -> PLL crystal value in Hz +*/ + +void __init s3c24xx_init_clocks(int xtal) +{ + if (xtal == 0) + xtal = 12*1000*1000; + + if (cpu == NULL) + panic("s3c24xx_init_clocks: no cpu setup?\n"); + + if (cpu->init_clocks == NULL) + panic("s3c24xx_init_clocks: cpu has no clock init\n"); + else + (cpu->init_clocks)(xtal); +} + +/* uart management */ + +static int nr_uarts __initdata = 0; + +static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS]; + +/* s3c24xx_init_uartdevs + * + * copy the specified platform data and configuration into our central + * set of devices, before the data is thrown away after the init process. + * + * This also fills in the array passed to the serial driver for the + * early initialisation of the console. +*/ + +void __init s3c24xx_init_uartdevs(char *name, + struct s3c24xx_uart_resources *res, + struct s3c2410_uartcfg *cfg, int no) +{ + struct platform_device *platdev; + struct s3c2410_uartcfg *cfgptr = uart_cfgs; + struct s3c24xx_uart_resources *resp; + int uart; + + memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no); + + for (uart = 0; uart < no; uart++, cfg++, cfgptr++) { + platdev = s3c24xx_uart_src[cfgptr->hwport]; + + resp = res + cfgptr->hwport; + + s3c24xx_uart_devs[uart] = platdev; + + platdev->name = name; + platdev->resource = resp->resources; + platdev->num_resources = resp->nr_resources; + + platdev->dev.platform_data = cfgptr; + } + + nr_uarts = no; +} + +void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + if (cpu == NULL) + return; + + if (cpu->init_uarts == NULL) { + printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n"); + } else + (cpu->init_uarts)(cfg, no); +} + +static int __init s3c_arch_init(void) +{ + int ret; + + // do the correct init for cpu + + if (cpu == NULL) + panic("s3c_arch_init: NULL cpu\n"); + + ret = (cpu->init)(); + if (ret != 0) + return ret; + + ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts); + return ret; +} + +arch_initcall(s3c_arch_init); diff --git a/arch/arm/plat-s3c/pwm-clock.c b/arch/arm/plat-s3c/pwm-clock.c new file mode 100644 index 00000000000..a318215ab53 --- /dev/null +++ b/arch/arm/plat-s3c/pwm-clock.c @@ -0,0 +1,463 @@ +/* linux/arch/arm/plat-s3c24xx/pwm-clock.c + * + * Copyright (c) 2007 Simtec Electronics + * Copyright (c) 2007, 2008 Ben Dooks + * Ben Dooks <ben-linux@fluff.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/log2.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <asm/irq.h> + +#include <plat/clock.h> +#include <plat/cpu.h> + +#include <plat/regs-timer.h> +#include <mach/pwm-clock.h> + +/* Each of the timers 0 through 5 go through the following + * clock tree, with the inputs depending on the timers. + * + * pclk ---- [ prescaler 0 ] -+---> timer 0 + * +---> timer 1 + * + * pclk ---- [ prescaler 1 ] -+---> timer 2 + * +---> timer 3 + * \---> timer 4 + * + * Which are fed into the timers as so: + * + * prescaled 0 ---- [ div 2,4,8,16 ] ---\ + * [mux] -> timer 0 + * tclk 0 ------------------------------/ + * + * prescaled 0 ---- [ div 2,4,8,16 ] ---\ + * [mux] -> timer 1 + * tclk 0 ------------------------------/ + * + * + * prescaled 1 ---- [ div 2,4,8,16 ] ---\ + * [mux] -> timer 2 + * tclk 1 ------------------------------/ + * + * prescaled 1 ---- [ div 2,4,8,16 ] ---\ + * [mux] -> timer 3 + * tclk 1 ------------------------------/ + * + * prescaled 1 ---- [ div 2,4,8, 16 ] --\ + * [mux] -> timer 4 + * tclk 1 ------------------------------/ + * + * Since the mux and the divider are tied together in the + * same register space, it is impossible to set the parent + * and the rate at the same time. To avoid this, we add an + * intermediate 'prescaled-and-divided' clock to select + * as the parent for the timer input clock called tdiv. + * + * prescaled clk --> pwm-tdiv ---\ + * [ mux ] --> timer X + * tclk -------------------------/ +*/ + +static struct clk clk_timer_scaler[]; + +static unsigned long clk_pwm_scaler_get_rate(struct clk *clk) +{ + unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0); + + if (clk == &clk_timer_scaler[1]) { + tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK; + tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT; + } else { + tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK; + } + + return clk_get_rate(clk->parent) / (tcfg0 + 1); +} + +static unsigned long clk_pwm_scaler_round_rate(struct clk *clk, + unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long divisor = parent_rate / rate; + + if (divisor > 256) + divisor = 256; + else if (divisor < 2) + divisor = 2; + + return parent_rate / divisor; +} + +static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long round = clk_pwm_scaler_round_rate(clk, rate); + unsigned long tcfg0; + unsigned long divisor; + unsigned long flags; + + divisor = clk_get_rate(clk->parent) / round; + divisor--; + + local_irq_save(flags); + tcfg0 = __raw_readl(S3C2410_TCFG0); + + if (clk == &clk_timer_scaler[1]) { + tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK; + tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT; + } else { + tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK; + tcfg0 |= divisor; + } + + __raw_writel(tcfg0, S3C2410_TCFG0); + local_irq_restore(flags); + + return 0; +} + +static struct clk clk_timer_scaler[] = { + [0] = { + .name = "pwm-scaler0", + .id = -1, + .get_rate = clk_pwm_scaler_get_rate, + .set_rate = clk_pwm_scaler_set_rate, + .round_rate = clk_pwm_scaler_round_rate, + }, + [1] = { + .name = "pwm-scaler1", + .id = -1, + .get_rate = clk_pwm_scaler_get_rate, + .set_rate = clk_pwm_scaler_set_rate, + .round_rate = clk_pwm_scaler_round_rate, + }, +}; + +static struct clk clk_timer_tclk[] = { + [0] = { + .name = "pwm-tclk0", + .id = -1, + }, + [1] = { + .name = "pwm-tclk1", + .id = -1, + }, +}; + +struct pwm_tdiv_clk { + struct clk clk; + unsigned int divisor; +}; + +static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk) +{ + return container_of(clk, struct pwm_tdiv_clk, clk); +} + +static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk) +{ + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + unsigned int divisor; + + tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id); + tcfg1 &= S3C2410_TCFG1_MUX_MASK; + + if (pwm_cfg_src_is_tclk(tcfg1)) + divisor = to_tdiv(clk)->divisor; + else + divisor = tcfg_to_divisor(tcfg1); + + return clk_get_rate(clk->parent) / divisor; +} + +static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk, + unsigned long rate) +{ + unsigned long parent_rate; + unsigned long divisor; + + parent_rate = clk_get_rate(clk->parent); + divisor = parent_rate / rate; + + if (divisor <= 1 && pwm_tdiv_has_div1()) + divisor = 1; + else if (divisor <= 2) + divisor = 2; + else if (divisor <= 4) + divisor = 4; + else if (divisor <= 8) + divisor = 8; + else + divisor = 16; + + return parent_rate / divisor; +} + +static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk) +{ + return pwm_tdiv_div_bits(divclk->divisor); +} + +static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk) +{ + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + unsigned long bits = clk_pwm_tdiv_bits(divclk); + unsigned long flags; + unsigned long shift = S3C2410_TCFG1_SHIFT(divclk->clk.id); + + local_irq_save(flags); + + tcfg1 = __raw_readl(S3C2410_TCFG1); + tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift); + tcfg1 |= bits << shift; + __raw_writel(tcfg1, S3C2410_TCFG1); + + local_irq_restore(flags); +} + +static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate) +{ + struct pwm_tdiv_clk *divclk = to_tdiv(clk); + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long divisor; + + tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id); + tcfg1 &= S3C2410_TCFG1_MUX_MASK; + + rate = clk_round_rate(clk, rate); + divisor = parent_rate / rate; + + if (divisor > 16) + return -EINVAL; + + divclk->divisor = divisor; + + /* Update the current MUX settings if we are currently + * selected as the clock source for this clock. */ + + if (!pwm_cfg_src_is_tclk(tcfg1)) + clk_pwm_tdiv_update(divclk); + + return 0; +} + +static struct pwm_tdiv_clk clk_timer_tdiv[] = { + [0] = { + .clk = { + .name = "pwm-tdiv", + .parent = &clk_timer_scaler[0], + .get_rate = clk_pwm_tdiv_get_rate, + .set_rate = clk_pwm_tdiv_set_rate, + .round_rate = clk_pwm_tdiv_round_rate, + }, + }, + [1] = { + .clk = { + .name = "pwm-tdiv", + .parent = &clk_timer_scaler[0], + .get_rate = clk_pwm_tdiv_get_rate, + .set_rate = clk_pwm_tdiv_set_rate, + .round_rate = clk_pwm_tdiv_round_rate, + } + }, + [2] = { + .clk = { + .name = "pwm-tdiv", + .parent = &clk_timer_scaler[1], + .get_rate = clk_pwm_tdiv_get_rate, + .set_rate = clk_pwm_tdiv_set_rate, + .round_rate = clk_pwm_tdiv_round_rate, + }, + }, + [3] = { + .clk = { + .name = "pwm-tdiv", + .parent = &clk_timer_scaler[1], + .get_rate = clk_pwm_tdiv_get_rate, + .set_rate = clk_pwm_tdiv_set_rate, + .round_rate = clk_pwm_tdiv_round_rate, + }, + }, + [4] = { + .clk = { + .name = "pwm-tdiv", + .parent = &clk_timer_scaler[1], + .get_rate = clk_pwm_tdiv_get_rate, + .set_rate = clk_pwm_tdiv_set_rate, + .round_rate = clk_pwm_tdiv_round_rate, + }, + }, +}; + +static int __init clk_pwm_tdiv_register(unsigned int id) +{ + struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id]; + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + + tcfg1 >>= S3C2410_TCFG1_SHIFT(id); + tcfg1 &= S3C2410_TCFG1_MUX_MASK; + + divclk->clk.id = id; + divclk->divisor = tcfg_to_divisor(tcfg1); + + return s3c24xx_register_clock(&divclk->clk); +} + +static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id) +{ + return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0]; +} + +static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id) +{ + return &clk_timer_tdiv[id].clk; +} + +static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent) +{ + unsigned int id = clk->id; + unsigned long tcfg1; + unsigned long flags; + unsigned long bits; + unsigned long shift = S3C2410_TCFG1_SHIFT(id); + + if (parent == s3c24xx_pwmclk_tclk(id)) + bits = S3C_TCFG1_MUX_TCLK << shift; + else if (parent == s3c24xx_pwmclk_tdiv(id)) + bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift; + else + return -EINVAL; + + clk->parent = parent; + + local_irq_save(flags); + + tcfg1 = __raw_readl(S3C2410_TCFG1); + tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift); + __raw_writel(tcfg1 | bits, S3C2410_TCFG1); + + local_irq_restore(flags); + + return 0; +} + +static struct clk clk_tin[] = { + [0] = { + .name = "pwm-tin", + .id = 0, + .set_parent = clk_pwm_tin_set_parent, + }, + [1] = { + .name = "pwm-tin", + .id = 1, + .set_parent = clk_pwm_tin_set_parent, + }, + [2] = { + .name = "pwm-tin", + .id = 2, + .set_parent = clk_pwm_tin_set_parent, + }, + [3] = { + .name = "pwm-tin", + .id = 3, + .set_parent = clk_pwm_tin_set_parent, + }, + [4] = { + .name = "pwm-tin", + .id = 4, + .set_parent = clk_pwm_tin_set_parent, + }, +}; + +static __init int clk_pwm_tin_register(struct clk *pwm) +{ + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + unsigned int id = pwm->id; + + struct clk *parent; + int ret; + + ret = s3c24xx_register_clock(pwm); + if (ret < 0) + return ret; + + tcfg1 >>= S3C2410_TCFG1_SHIFT(id); + tcfg1 &= S3C2410_TCFG1_MUX_MASK; + + if (pwm_cfg_src_is_tclk(tcfg1)) + parent = s3c24xx_pwmclk_tclk(id); + else + parent = s3c24xx_pwmclk_tdiv(id); + + return clk_set_parent(pwm, parent); +} + +/** + * s3c_pwmclk_init() - initialise pwm clocks + * + * Initialise and register the clocks which provide the inputs for the + * pwm timer blocks. + * + * Note, this call is required by the time core, so must be called after + * the base clocks are added and before any of the initcalls are run. + */ +__init void s3c_pwmclk_init(void) +{ + struct clk *clk_timers; + unsigned int clk; + int ret; + + clk_timers = clk_get(NULL, "timers"); + if (IS_ERR(clk_timers)) { + printk(KERN_ERR "%s: no parent clock\n", __func__); + return; + } + + for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) { + clk_timer_scaler[clk].parent = clk_timers; + ret = s3c24xx_register_clock(&clk_timer_scaler[clk]); + if (ret < 0) { + printk(KERN_ERR "error adding pwm scaler%d clock\n", clk); + return; + } + } + + for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) { + ret = s3c24xx_register_clock(&clk_timer_tclk[clk]); + if (ret < 0) { + printk(KERN_ERR "error adding pww tclk%d\n", clk); + return; + } + } + + for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) { + ret = clk_pwm_tdiv_register(clk); + if (ret < 0) { + printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk); + return; + } + } + + for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) { + ret = clk_pwm_tin_register(&clk_tin[clk]); + if (ret < 0) { + printk(KERN_ERR "error adding pwm%d tin clock\n", clk); + return; + } + } +} diff --git a/arch/arm/plat-s3c/time.c b/arch/arm/plat-s3c/time.c new file mode 100644 index 00000000000..3b27b29da47 --- /dev/null +++ b/arch/arm/plat-s3c/time.c @@ -0,0 +1,285 @@ +/* linux/arch/arm/plat-s3c24xx/time.c + * + * Copyright (C) 2003-2005 Simtec Electronics + * Ben Dooks, <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/platform_device.h> + +#include <asm/system.h> +#include <asm/leds.h> +#include <asm/mach-types.h> + +#include <asm/irq.h> +#include <mach/map.h> +#include <plat/regs-timer.h> +#include <mach/regs-irq.h> +#include <asm/mach/time.h> +#include <mach/tick.h> + +#include <plat/clock.h> +#include <plat/cpu.h> + +static unsigned long timer_startval; +static unsigned long timer_usec_ticks; + +#ifndef TICK_MAX +#define TICK_MAX (0xffff) +#endif + +#define TIMER_USEC_SHIFT 16 + +/* we use the shifted arithmetic to work out the ratio of timer ticks + * to usecs, as often the peripheral clock is not a nice even multiple + * of 1MHz. + * + * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok + * for the current HZ value of 200 without producing overflows. + * + * Original patch by Dimitry Andric, updated by Ben Dooks +*/ + + +/* timer_mask_usec_ticks + * + * given a clock and divisor, make the value to pass into timer_ticks_to_usec + * to scale the ticks into usecs +*/ + +static inline unsigned long +timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk) +{ + unsigned long den = pclk / 1000; + + return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den; +} + +/* timer_ticks_to_usec + * + * convert timer ticks to usec. +*/ + +static inline unsigned long timer_ticks_to_usec(unsigned long ticks) +{ + unsigned long res; + + res = ticks * timer_usec_ticks; + res += 1 << (TIMER_USEC_SHIFT - 4); /* round up slightly */ + + return res >> TIMER_USEC_SHIFT; +} + +/*** + * Returns microsecond since last clock interrupt. Note that interrupts + * will have been disabled by do_gettimeoffset() + * IRQs are disabled before entering here from do_gettimeofday() + */ + +static unsigned long s3c2410_gettimeoffset (void) +{ + unsigned long tdone; + unsigned long tval; + + /* work out how many ticks have gone since last timer interrupt */ + + tval = __raw_readl(S3C2410_TCNTO(4)); + tdone = timer_startval - tval; + + /* check to see if there is an interrupt pending */ + + if (s3c24xx_ostimer_pending()) { + /* re-read the timer, and try and fix up for the missed + * interrupt. Note, the interrupt may go off before the + * timer has re-loaded from wrapping. + */ + + tval = __raw_readl(S3C2410_TCNTO(4)); + tdone = timer_startval - tval; + + if (tval != 0) + tdone += timer_startval; + } + + return timer_ticks_to_usec(tdone); +} + + +/* + * IRQ handler for the timer + */ +static irqreturn_t +s3c2410_timer_interrupt(int irq, void *dev_id) +{ + timer_tick(); + return IRQ_HANDLED; +} + +static struct irqaction s3c2410_timer_irq = { + .name = "S3C2410 Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = s3c2410_timer_interrupt, +}; + +#define use_tclk1_12() ( \ + machine_is_bast() || \ + machine_is_vr1000() || \ + machine_is_anubis() || \ + machine_is_osiris()) + +static struct clk *tin; +static struct clk *tdiv; +static struct clk *timerclk; + +/* + * Set up timer interrupt, and return the current time in seconds. + * + * Currently we only use timer4, as it is the only timer which has no + * other function that can be exploited externally + */ +static void s3c2410_timer_setup (void) +{ + unsigned long tcon; + unsigned long tcnt; + unsigned long tcfg1; + unsigned long tcfg0; + + tcnt = TICK_MAX; /* default value for tcnt */ + + /* configure the system for whichever machine is in use */ + + if (use_tclk1_12()) { + /* timer is at 12MHz, scaler is 1 */ + timer_usec_ticks = timer_mask_usec_ticks(1, 12000000); + tcnt = 12000000 / HZ; + + tcfg1 = __raw_readl(S3C2410_TCFG1); + tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK; + tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1; + __raw_writel(tcfg1, S3C2410_TCFG1); + } else { + unsigned long pclk; + struct clk *tscaler; + + /* for the h1940 (and others), we use the pclk from the core + * to generate the timer values. since values around 50 to + * 70MHz are not values we can directly generate the timer + * value from, we need to pre-scale and divide before using it. + * + * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz + * (8.45 ticks per usec) + */ + + pclk = clk_get_rate(timerclk); + + /* configure clock tick */ + + timer_usec_ticks = timer_mask_usec_ticks(6, pclk); + + tscaler = clk_get_parent(tdiv); + + clk_set_rate(tscaler, pclk / 3); + clk_set_rate(tdiv, pclk / 6); + clk_set_parent(tin, tdiv); + + tcnt = clk_get_rate(tin) / HZ; + } + + tcon = __raw_readl(S3C2410_TCON); + tcfg0 = __raw_readl(S3C2410_TCFG0); + tcfg1 = __raw_readl(S3C2410_TCFG1); + + /* timers reload after counting zero, so reduce the count by 1 */ + + tcnt--; + + printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n", + tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks); + + /* check to see if timer is within 16bit range... */ + if (tcnt > TICK_MAX) { + panic("setup_timer: HZ is too small, cannot configure timer!"); + return; + } + + __raw_writel(tcfg1, S3C2410_TCFG1); + __raw_writel(tcfg0, S3C2410_TCFG0); + + timer_startval = tcnt; + __raw_writel(tcnt, S3C2410_TCNTB(4)); + + /* ensure timer is stopped... */ + + tcon &= ~(7<<20); + tcon |= S3C2410_TCON_T4RELOAD; + tcon |= S3C2410_TCON_T4MANUALUPD; + + __raw_writel(tcon, S3C2410_TCON); + __raw_writel(tcnt, S3C2410_TCNTB(4)); + __raw_writel(tcnt, S3C2410_TCMPB(4)); + + /* start the timer running */ + tcon |= S3C2410_TCON_T4START; + tcon &= ~S3C2410_TCON_T4MANUALUPD; + __raw_writel(tcon, S3C2410_TCON); +} + +static void __init s3c2410_timer_resources(void) +{ + struct platform_device tmpdev; + + tmpdev.dev.bus = &platform_bus_type; + tmpdev.id = 4; + + timerclk = clk_get(NULL, "timers"); + if (IS_ERR(timerclk)) + panic("failed to get clock for system timer"); + + clk_enable(timerclk); + + if (!use_tclk1_12()) { + tin = clk_get(&tmpdev.dev, "pwm-tin"); + if (IS_ERR(tin)) + panic("failed to get pwm-tin clock for system timer"); + + tdiv = clk_get(&tmpdev.dev, "pwm-tdiv"); + if (IS_ERR(tdiv)) + panic("failed to get pwm-tdiv clock for system timer"); + } + + clk_enable(tin); +} + +static void __init s3c2410_timer_init(void) +{ + s3c2410_timer_resources(); + s3c2410_timer_setup(); + setup_irq(IRQ_TIMER4, &s3c2410_timer_irq); +} + +struct sys_timer s3c24xx_timer = { + .init = s3c2410_timer_init, + .offset = s3c2410_gettimeoffset, + .resume = s3c2410_timer_setup +}; |