diff options
Diffstat (limited to 'arch/arm/plat-s5p/include/plat')
| -rw-r--r-- | arch/arm/plat-s5p/include/plat/camport.h | 28 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/include/plat/csis.h | 28 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/include/plat/exynos4.h | 34 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/include/plat/mipi_csis.h | 43 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/include/plat/s5p-time.h | 40 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/include/plat/s5pv310.h | 34 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/include/plat/sysmmu.h | 95 |
7 files changed, 240 insertions, 62 deletions
diff --git a/arch/arm/plat-s5p/include/plat/camport.h b/arch/arm/plat-s5p/include/plat/camport.h new file mode 100644 index 00000000000..71688c8ba28 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/camport.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * + * S5P series camera interface helper functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef PLAT_S5P_CAMPORT_H_ +#define PLAT_S5P_CAMPORT_H_ __FILE__ + +enum s5p_camport_id { + S5P_CAMPORT_A, + S5P_CAMPORT_B, +}; + +/* + * The helper functions to configure GPIO for the camera parallel bus. + * The camera port can be multiplexed with any FIMC entity, even multiple + * FIMC entities are allowed to be attached to a single port simultaneously. + * These functions are to be used in the board setup code. + */ +int s5pv210_fimc_setup_gpio(enum s5p_camport_id id); +int exynos4_fimc_setup_gpio(enum s5p_camport_id id); + +#endif diff --git a/arch/arm/plat-s5p/include/plat/csis.h b/arch/arm/plat-s5p/include/plat/csis.h deleted file mode 100644 index 51e308c7981..00000000000 --- a/arch/arm/plat-s5p/include/plat/csis.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics - * - * S5P series MIPI CSI slave device support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef PLAT_S5P_CSIS_H_ -#define PLAT_S5P_CSIS_H_ __FILE__ - -/** - * struct s5p_platform_mipi_csis - platform data for MIPI-CSIS - * @clk_rate: bus clock frequency - * @lanes: number of data lanes used - * @alignment: data alignment in bits - * @hs_settle: HS-RX settle time - */ -struct s5p_platform_mipi_csis { - unsigned long clk_rate; - u8 lanes; - u8 alignment; - u8 hs_settle; -}; - -#endif /* PLAT_S5P_CSIS_H_ */ diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h new file mode 100644 index 00000000000..907caab53dc --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/exynos4.h @@ -0,0 +1,34 @@ +/* linux/arch/arm/plat-s5p/include/plat/exynos4.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for exynos4 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for EXYNOS4 related SoCs */ + +extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void exynos4_register_clocks(void); +extern void exynos4_setup_clocks(void); + +#ifdef CONFIG_CPU_EXYNOS4210 + +extern int exynos4_init(void); +extern void exynos4_init_irq(void); +extern void exynos4_map_io(void); +extern void exynos4_init_clocks(int xtal); +extern struct sys_timer exynos4_timer; + +#define exynos4_init_uarts exynos4_common_init_uarts + +#else +#define exynos4_init_clocks NULL +#define exynos4_init_uarts NULL +#define exynos4_map_io NULL +#define exynos4_init NULL +#endif diff --git a/arch/arm/plat-s5p/include/plat/mipi_csis.h b/arch/arm/plat-s5p/include/plat/mipi_csis.h new file mode 100644 index 00000000000..9bd254c5ed2 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/mipi_csis.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. + * + * S5P series MIPI CSI slave device support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef PLAT_S5P_MIPI_CSIS_H_ +#define PLAT_S5P_MIPI_CSIS_H_ __FILE__ + +struct platform_device; + +/** + * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver + * @clk_rate: bus clock frequency + * @lanes: number of data lanes used + * @alignment: data alignment in bits + * @hs_settle: HS-RX settle time + * @fixed_phy_vdd: false to enable external D-PHY regulator management in the + * driver or true in case this regulator has no enable function + * @phy_enable: pointer to a callback controlling D-PHY enable/reset + */ +struct s5p_platform_mipi_csis { + unsigned long clk_rate; + u8 lanes; + u8 alignment; + u8 hs_settle; + bool fixed_phy_vdd; + int (*phy_enable)(struct platform_device *pdev, bool on); +}; + +/** + * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control + * @pdev: MIPI-CSIS platform device + * @on: true to enable D-PHY and deassert its reset + * false to disable D-PHY + */ +int s5p_csis_phy_enable(struct platform_device *pdev, bool on); + +#endif /* PLAT_S5P_MIPI_CSIS_H_ */ diff --git a/arch/arm/plat-s5p/include/plat/s5p-time.h b/arch/arm/plat-s5p/include/plat/s5p-time.h new file mode 100644 index 00000000000..575e88109db --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p-time.h @@ -0,0 +1,40 @@ +/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h + * + * Copyright 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5p time support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_S5P_TIME_H +#define __ASM_PLAT_S5P_TIME_H __FILE__ + +/* S5P HR-Timer Clock mode */ +enum s5p_timer_mode { + S5P_PWM0, + S5P_PWM1, + S5P_PWM2, + S5P_PWM3, + S5P_PWM4, +}; + +struct s5p_timer_source { + unsigned int event_id; + unsigned int source_id; +}; + +/* Be able to sleep for atleast 4 seconds (usually more) */ +#define S5PTIMER_MIN_RANGE 4 + +#define TCNT_MAX 0xffffffff +#define NON_PERIODIC 0 +#define PERIODIC 1 + +extern void __init s5p_set_timer_source(enum s5p_timer_mode event, + enum s5p_timer_mode source); +extern struct sys_timer s5p_timer; +#endif /* __ASM_PLAT_S5P_TIME_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5pv310.h b/arch/arm/plat-s5p/include/plat/s5pv310.h deleted file mode 100644 index 769c991ceb3..00000000000 --- a/arch/arm/plat-s5p/include/plat/s5pv310.h +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5pv310.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5pv310 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5PV310 related SoCs */ - -extern void s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5pv310_register_clocks(void); -extern void s5pv310_setup_clocks(void); - -#ifdef CONFIG_CPU_S5PV310 - -extern int s5pv310_init(void); -extern void s5pv310_init_irq(void); -extern void s5pv310_map_io(void); -extern void s5pv310_init_clocks(int xtal); -extern struct sys_timer s5pv310_timer; - -#define s5pv310_init_uarts s5pv310_common_init_uarts - -#else -#define s5pv310_init_clocks NULL -#define s5pv310_init_uarts NULL -#define s5pv310_map_io NULL -#define s5pv310_init NULL -#endif diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-s5p/include/plat/sysmmu.h new file mode 100644 index 00000000000..bf5283c2a19 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/sysmmu.h @@ -0,0 +1,95 @@ +/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung System MMU driver for S5P platform + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM__PLAT_SYSMMU_H +#define __ASM__PLAT_SYSMMU_H __FILE__ + +enum S5P_SYSMMU_INTERRUPT_TYPE { + SYSMMU_PAGEFAULT, + SYSMMU_AR_MULTIHIT, + SYSMMU_AW_MULTIHIT, + SYSMMU_BUSERROR, + SYSMMU_AR_SECURITY, + SYSMMU_AR_ACCESS, + SYSMMU_AW_SECURITY, + SYSMMU_AW_PROTECTION, /* 7 */ + SYSMMU_FAULTS_NUM +}; + +#ifdef CONFIG_S5P_SYSTEM_MMU + +#include <mach/sysmmu.h> + +/** + * s5p_sysmmu_enable() - enable system mmu of ip + * @ips: The ip connected system mmu. + * #pgd: Base physical address of the 1st level page table + * + * This function enable system mmu to transfer address + * from virtual address to physical address + */ +void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd); + +/** + * s5p_sysmmu_disable() - disable sysmmu mmu of ip + * @ips: The ip connected system mmu. + * + * This function disable system mmu to transfer address + * from virtual address to physical address + */ +void s5p_sysmmu_disable(sysmmu_ips ips); + +/** + * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table + * @ips: The ip connected system mmu. + * @pgd: The page table base address. + * + * This function set page table base address + * When system mmu transfer address from virtaul address to physical address, + * system mmu refer address information from page table + */ +void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd); + +/** + * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu + * @ips: The ip connected system mmu. + * + * This function flush all TLB entry in system mmu + */ +void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips); + +/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs + * @itype: type of fault. + * @pgtable_base: the physical address of page table base. This is 0 if @ips is + * SYSMMU_BUSERROR. + * @fault_addr: the device (virtual) address that the System MMU tried to + * translated. This is 0 if @ips is SYSMMU_BUSERROR. + * Called when interrupt occurred by the System MMUs + * The device drivers of peripheral devices that has a System MMU can implement + * a fault handler to resolve address translation fault by System MMU. + * The meanings of return value and parameters are described below. + + * return value: non-zero if the fault is correctly resolved. + * zero if the fault is not handled. + */ +void s5p_sysmmu_set_fault_handler(sysmmu_ips ips, + int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype, + unsigned long pgtable_base, + unsigned long fault_addr)); +#else +#define s5p_sysmmu_enable(ips, pgd) do { } while (0) +#define s5p_sysmmu_disable(ips) do { } while (0) +#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0) +#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0) +#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0) +#endif +#endif /* __ASM_PLAT_SYSMMU_H */ |