diff options
Diffstat (limited to 'arch/arm/plat-s5p')
| -rw-r--r-- | arch/arm/plat-s5p/Kconfig | 25 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/Makefile | 19 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/clock.c | 149 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/cpu.c | 113 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/dev-uart.c | 139 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/include/plat/irqs.h | 90 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/include/plat/map-s5p.h | 34 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/include/plat/pll.h | 83 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/include/plat/s5p-clock.h | 40 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/include/plat/s5p6440.h | 37 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/include/plat/s5p6442.h | 33 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/include/plat/s5pv210.h | 33 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/irq.c | 72 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/setup-i2c0.c | 25 |
14 files changed, 892 insertions, 0 deletions
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig new file mode 100644 index 00000000000..d400a6a20fe --- /dev/null +++ b/arch/arm/plat-s5p/Kconfig @@ -0,0 +1,25 @@ +# arch/arm/plat-s5p/Kconfig +# +# Copyright (c) 2009 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +config PLAT_S5P + bool + depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210) + default y + select ARM_VIC + select NO_IOPORT + select ARCH_REQUIRE_GPIOLIB + select S3C_GPIO_TRACK + select SAMSUNG_GPIOLIB_4BIT + select S3C_GPIO_CFG_S3C64XX + select S3C_GPIO_PULL_UPDOWN + select S3C_GPIO_CFG_S3C24XX + select PLAT_SAMSUNG + select SAMSUNG_CLKSRC + select SAMSUNG_IRQ_VIC_TIMER + select SAMSUNG_IRQ_UART + help + Base platform code for Samsung's S5P series SoC. diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile new file mode 100644 index 00000000000..a7c54b332d2 --- /dev/null +++ b/arch/arm/plat-s5p/Makefile @@ -0,0 +1,19 @@ +# arch/arm/plat-s5p/Makefile +# +# Copyright (c) 2009 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := dummy.o +obj- := + +# Core files + +obj-y += dev-uart.o +obj-y += cpu.o +obj-y += clock.o +obj-y += irq.o +obj-y += setup-i2c0.o diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c new file mode 100644 index 00000000000..aa96e335073 --- /dev/null +++ b/arch/arm/plat-s5p/clock.c @@ -0,0 +1,149 @@ +/* linux/arch/arm/plat-s5p/clock.c + * + * Copyright 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P - Common clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> +#include <asm/div64.h> + +#include <plat/clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p-clock.h> + +/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call + * clk_ext_xtal_mux. +*/ +struct clk clk_ext_xtal_mux = { + .name = "ext_xtal", + .id = -1, +}; + +static struct clk s5p_clk_27m = { + .name = "clk_27m", + .id = -1, + .rate = 27000000, +}; + +/* 48MHz USB Phy clock output */ +struct clk clk_48m = { + .name = "clk_48m", + .id = -1, + .rate = 48000000, +}; + +/* APLL clock output + * No need .ctrlbit, this is always on +*/ +struct clk clk_fout_apll = { + .name = "fout_apll", + .id = -1, +}; + +/* MPLL clock output + * No need .ctrlbit, this is always on +*/ +struct clk clk_fout_mpll = { + .name = "fout_mpll", + .id = -1, +}; + +/* EPLL clock output */ +struct clk clk_fout_epll = { + .name = "fout_epll", + .id = -1, + .ctrlbit = (1 << 31), +}; + +/* ARM clock */ +struct clk clk_arm = { + .name = "armclk", + .id = -1, + .rate = 0, + .ctrlbit = 0, +}; + +/* Possible clock sources for APLL Mux */ +static struct clk *clk_src_apll_list[] = { + [0] = &clk_fin_apll, + [1] = &clk_fout_apll, +}; + +struct clksrc_sources clk_src_apll = { + .sources = clk_src_apll_list, + .nr_sources = ARRAY_SIZE(clk_src_apll_list), +}; + +/* Possible clock sources for MPLL Mux */ +static struct clk *clk_src_mpll_list[] = { + [0] = &clk_fin_mpll, + [1] = &clk_fout_mpll, +}; + +struct clksrc_sources clk_src_mpll = { + .sources = clk_src_mpll_list, + .nr_sources = ARRAY_SIZE(clk_src_mpll_list), +}; + +/* Possible clock sources for EPLL Mux */ +static struct clk *clk_src_epll_list[] = { + [0] = &clk_fin_epll, + [1] = &clk_fout_epll, +}; + +struct clksrc_sources clk_src_epll = { + .sources = clk_src_epll_list, + .nr_sources = ARRAY_SIZE(clk_src_epll_list), +}; + +struct clk clk_vpll = { + .name = "vpll", + .id = -1, +}; + +int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + u32 con; + + con = __raw_readl(reg); + con = enable ? (con | ctrlbit) : (con & ~ctrlbit); + __raw_writel(con, reg); + return 0; +} + +static struct clk *s5p_clks[] __initdata = { + &clk_ext_xtal_mux, + &clk_48m, + &s5p_clk_27m, + &clk_fout_apll, + &clk_fout_mpll, + &clk_fout_epll, + &clk_arm, + &clk_vpll, +}; + +void __init s5p_register_clocks(unsigned long xtal_freq) +{ + int ret; + + clk_ext_xtal_mux.rate = xtal_freq; + + ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks)); + if (ret > 0) + printk(KERN_ERR "Failed to register s5p clocks\n"); +} diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c new file mode 100644 index 00000000000..f92e5de3a75 --- /dev/null +++ b/arch/arm/plat-s5p/cpu.c @@ -0,0 +1,113 @@ +/* linux/arch/arm/plat-s5p/cpu.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P CPU Support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <mach/map.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/regs-clock.h> +#include <plat/cpu.h> +#include <plat/s5p6440.h> +#include <plat/s5p6442.h> +#include <plat/s5pv210.h> + +/* table of supported CPUs */ + +static const char name_s5p6440[] = "S5P6440"; +static const char name_s5p6442[] = "S5P6442"; +static const char name_s5pv210[] = "S5PV210/S5PC110"; + +static struct cpu_table cpu_ids[] __initdata = { + { + .idcode = 0x56440100, + .idmask = 0xffffff00, + .map_io = s5p6440_map_io, + .init_clocks = s5p6440_init_clocks, + .init_uarts = s5p6440_init_uarts, + .init = s5p6440_init, + .name = name_s5p6440, + }, { + .idcode = 0x36442000, + .idmask = 0xffffff00, + .map_io = s5p6442_map_io, + .init_clocks = s5p6442_init_clocks, + .init_uarts = s5p6442_init_uarts, + .init = s5p6442_init, + .name = name_s5p6442, + }, { + .idcode = 0x43110000, + .idmask = 0xfffff000, + .map_io = s5pv210_map_io, + .init_clocks = s5pv210_init_clocks, + .init_uarts = s5pv210_init_uarts, + .init = s5pv210_init, + .name = name_s5pv210, + }, +}; + +/* minimal IO mapping */ + +static struct map_desc s5p_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_CHIPID, + .pfn = __phys_to_pfn(S5P_PA_CHIPID), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(S5P_PA_SYSCON), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5P_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5P_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_TIMER, + .pfn = __phys_to_pfn(S5P_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5P_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +/* read cpu identification code */ + +void __init s5p_init_io(struct map_desc *mach_desc, + int size, void __iomem *cpuid_addr) +{ + unsigned long idcode; + + /* initialize the io descriptors we need for initialization */ + iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc)); + if (mach_desc) + iotable_init(mach_desc, size); + + idcode = __raw_readl(cpuid_addr); + s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); +} diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c new file mode 100644 index 00000000000..a89331ef4ae --- /dev/null +++ b/arch/arm/plat-s5p/dev-uart.c @@ -0,0 +1,139 @@ +/* linux/arch/arm/plat-s5p/dev-uart.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Base S5P UART resource and device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/devs.h> + + /* Serial port registrations */ + +static struct resource s5p_uart0_resource[] = { + [0] = { + .start = S5P_PA_UART0, + .end = S5P_PA_UART0 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX0, + .end = IRQ_S5P_UART_RX0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX0, + .end = IRQ_S5P_UART_TX0, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR0, + .end = IRQ_S5P_UART_ERR0, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource s5p_uart1_resource[] = { + [0] = { + .start = S5P_PA_UART1, + .end = S5P_PA_UART1 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX1, + .end = IRQ_S5P_UART_RX1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX1, + .end = IRQ_S5P_UART_TX1, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR1, + .end = IRQ_S5P_UART_ERR1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource s5p_uart2_resource[] = { + [0] = { + .start = S5P_PA_UART2, + .end = S5P_PA_UART2 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX2, + .end = IRQ_S5P_UART_RX2, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX2, + .end = IRQ_S5P_UART_TX2, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR2, + .end = IRQ_S5P_UART_ERR2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource s5p_uart3_resource[] = { +#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 + [0] = { + .start = S5P_PA_UART3, + .end = S5P_PA_UART3 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX3, + .end = IRQ_S5P_UART_RX3, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX3, + .end = IRQ_S5P_UART_TX3, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR3, + .end = IRQ_S5P_UART_ERR3, + .flags = IORESOURCE_IRQ, + }, +#endif +}; + +struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { + [0] = { + .resources = s5p_uart0_resource, + .nr_resources = ARRAY_SIZE(s5p_uart0_resource), + }, + [1] = { + .resources = s5p_uart1_resource, + .nr_resources = ARRAY_SIZE(s5p_uart1_resource), + }, + [2] = { + .resources = s5p_uart2_resource, + .nr_resources = ARRAY_SIZE(s5p_uart2_resource), + }, + [3] = { + .resources = s5p_uart3_resource, + .nr_resources = ARRAY_SIZE(s5p_uart3_resource), + }, +}; diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h new file mode 100644 index 00000000000..42e757f2e40 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/irqs.h @@ -0,0 +1,90 @@ +/* linux/arch/arm/plat-s5p/include/plat/irqs.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P Common IRQ support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_S5P_IRQS_H +#define __ASM_PLAT_S5P_IRQS_H __FILE__ + +/* we keep the first set of CPU IRQs out of the range of + * the ISA space, so that the PC104 has them to itself + * and we don't end up having to do horrible things to the + * standard ISA drivers.... + * + * note, since we're using the VICs, our start must be a + * mulitple of 32 to allow the common code to work + */ + +#define S5P_IRQ_OFFSET (32) + +#define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET) + +#define S5P_VIC0_BASE S5P_IRQ(0) +#define S5P_VIC1_BASE S5P_IRQ(32) +#define S5P_VIC2_BASE S5P_IRQ(64) +#define S5P_VIC3_BASE S5P_IRQ(96) + +#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32)) + +#define IRQ_VIC0_BASE S5P_VIC0_BASE +#define IRQ_VIC1_BASE S5P_VIC1_BASE +#define IRQ_VIC2_BASE S5P_VIC2_BASE + +/* UART interrupts, each UART has 4 intterupts per channel so + * use the space between the ISA and S3C main interrupts. Note, these + * are not in the same order as the S3C24XX series! */ + +#define IRQ_S5P_UART_BASE0 (16) +#define IRQ_S5P_UART_BASE1 (20) +#define IRQ_S5P_UART_BASE2 (24) +#define IRQ_S5P_UART_BASE3 (28) + +#define UART_IRQ_RXD (0) +#define UART_IRQ_ERR (1) +#define UART_IRQ_TXD (2) + +#define IRQ_S5P_UART_RX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR0 (IRQ_S5P_UART_BASE0 + UART_IRQ_ERR) + +#define IRQ_S5P_UART_RX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR1 (IRQ_S5P_UART_BASE1 + UART_IRQ_ERR) + +#define IRQ_S5P_UART_RX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR2 (IRQ_S5P_UART_BASE2 + UART_IRQ_ERR) + +#define IRQ_S5P_UART_RX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR3 (IRQ_S5P_UART_BASE3 + UART_IRQ_ERR) + +/* S3C compatibilty defines */ +#define IRQ_S3CUART_RX0 IRQ_S5P_UART_RX0 +#define IRQ_S3CUART_RX1 IRQ_S5P_UART_RX1 +#define IRQ_S3CUART_RX2 IRQ_S5P_UART_RX2 +#define IRQ_S3CUART_RX3 IRQ_S5P_UART_RX3 + +/* VIC based IRQs */ + +#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x)) +#define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x)) +#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x)) +#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x)) + +#define S5P_TIMER_IRQ(x) S5P_IRQ(11 + (x)) + +#define IRQ_TIMER0 S5P_TIMER_IRQ(0) +#define IRQ_TIMER1 S5P_TIMER_IRQ(1) +#define IRQ_TIMER2 S5P_TIMER_IRQ(2) +#define IRQ_TIMER3 S5P_TIMER_IRQ(3) +#define IRQ_TIMER4 S5P_TIMER_IRQ(4) + +#endif /* __ASM_PLAT_S5P_IRQS_H */ diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h new file mode 100644 index 00000000000..14828521f70 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/map-s5p.h @@ -0,0 +1,34 @@ +/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_MAP_S5P_H +#define __ASM_PLAT_MAP_S5P_H __FILE__ + +#define S5P_VA_CHIPID S3C_ADDR(0x00700000) +#define S5P_VA_GPIO S3C_ADDR(0x00500000) +#define S5P_VA_SYSTIMER S3C_ADDR(0x01200000) +#define S5P_VA_SROMC S3C_ADDR(0x01100000) + +#define S5P_VA_UART0 (S3C_VA_UART + 0x0) +#define S5P_VA_UART1 (S3C_VA_UART + 0x400) +#define S5P_VA_UART2 (S3C_VA_UART + 0x800) +#define S5P_VA_UART3 (S3C_VA_UART + 0xC00) + +#define S3C_UART_OFFSET (0x400) + +#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000)) +#define VA_VIC0 VA_VIC(0) +#define VA_VIC1 VA_VIC(1) +#define VA_VIC2 VA_VIC(2) +#define VA_VIC3 VA_VIC(3) + +#endif /* __ASM_PLAT_MAP_S5P_H */ diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h new file mode 100644 index 00000000000..d48325bb29e --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/pll.h @@ -0,0 +1,83 @@ +/* arch/arm/plat-s5p/include/plat/pll.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P PLL code + * + * Based on arch/arm/plat-s3c64xx/include/plat/pll.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define PLL45XX_MDIV_MASK (0x3FF) +#define PLL45XX_PDIV_MASK (0x3F) +#define PLL45XX_SDIV_MASK (0x7) +#define PLL45XX_MDIV_SHIFT (16) +#define PLL45XX_PDIV_SHIFT (8) +#define PLL45XX_SDIV_SHIFT (0) + +#include <asm/div64.h> + +enum pll45xx_type_t { + pll_4500, + pll_4502, + pll_4508 +}; + +static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, + enum pll45xx_type_t pll_type) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK; + pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK; + sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK; + + if (pll_type == pll_4508) + sdiv = sdiv - 1; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +#define PLL90XX_MDIV_MASK (0xFF) +#define PLL90XX_PDIV_MASK (0x3F) +#define PLL90XX_SDIV_MASK (0x7) +#define PLL90XX_KDIV_MASK (0xffff) +#define PLL90XX_MDIV_SHIFT (16) +#define PLL90XX_PDIV_SHIFT (8) +#define PLL90XX_SDIV_SHIFT (0) +#define PLL90XX_KDIV_SHIFT (0) + +static inline unsigned long s5p_get_pll90xx(unsigned long baseclk, + u32 pll_con, u32 pll_conk) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK; + pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK; + sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK; + kdiv = pll_conk & PLL90XX_KDIV_MASK; + + /* We need to multiple baseclk by mdiv (the integer part) and kdiv + * which is in 2^16ths, so shift mdiv up (does not overflow) and + * add kdiv before multiplying. The use of tmp is to avoid any + * overflows before shifting bac down into result when multipling + * by the mdiv and kdiv pair. + */ + + tmp = baseclk; + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h new file mode 100644 index 00000000000..56fb8b414d4 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h @@ -0,0 +1,40 @@ +/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h + * + * Copyright 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5p clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_S5P_CLOCK_H +#define __ASM_PLAT_S5P_CLOCK_H __FILE__ + +#include <linux/clk.h> + +#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) + +#define clk_fin_apll clk_ext_xtal_mux +#define clk_fin_mpll clk_ext_xtal_mux +#define clk_fin_epll clk_ext_xtal_mux +#define clk_fin_vpll clk_ext_xtal_mux + +extern struct clk clk_ext_xtal_mux; +extern struct clk clk_48m; +extern struct clk clk_fout_apll; +extern struct clk clk_fout_mpll; +extern struct clk clk_fout_epll; +extern struct clk clk_arm; +extern struct clk clk_vpll; + +extern struct clksrc_sources clk_src_apll; +extern struct clksrc_sources clk_src_mpll; +extern struct clksrc_sources clk_src_epll; + +extern int s5p6440_clk48m_ctrl(struct clk *clk, int enable); +extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable); + +#endif /* __ASM_PLAT_S5P_CLOCK_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h new file mode 100644 index 00000000000..a4cd75afeb3 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p6440.h @@ -0,0 +1,37 @@ +/* arch/arm/plat-s5p/include/plat/s5p6440.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5p6440 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + + /* Common init code for S5P6440 related SoCs */ + +extern void s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s5p6440_register_clocks(void); +extern void s5p6440_setup_clocks(void); + +#ifdef CONFIG_CPU_S5P6440 + +extern int s5p6440_init(void); +extern void s5p6440_init_irq(void); +extern void s5p6440_map_io(void); +extern void s5p6440_init_clocks(int xtal); + +#define s5p6440_init_uarts s5p6440_common_init_uarts + +#else +#define s5p6440_init_clocks NULL +#define s5p6440_init_uarts NULL +#define s5p6440_map_io NULL +#define s5p6440_init NULL +#endif + +/* S5P6440 timer */ + +extern struct sys_timer s5p6440_timer; diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h new file mode 100644 index 00000000000..7b8801349c9 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p6442.h @@ -0,0 +1,33 @@ +/* arch/arm/plat-s5p/include/plat/s5p6442.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5p6442 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for S5P6442 related SoCs */ + +extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s5p6442_register_clocks(void); +extern void s5p6442_setup_clocks(void); + +#ifdef CONFIG_CPU_S5P6442 + +extern int s5p6442_init(void); +extern void s5p6442_init_irq(void); +extern void s5p6442_map_io(void); +extern void s5p6442_init_clocks(int xtal); + +#define s5p6442_init_uarts s5p6442_common_init_uarts + +#else +#define s5p6442_init_clocks NULL +#define s5p6442_init_uarts NULL +#define s5p6442_map_io NULL +#define s5p6442_init NULL +#endif diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-s5p/include/plat/s5pv210.h new file mode 100644 index 00000000000..6c93a0c7810 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5pv210.h @@ -0,0 +1,33 @@ +/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5pv210 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for S5PV210 related SoCs */ + +extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s5pv210_register_clocks(void); +extern void s5pv210_setup_clocks(void); + +#ifdef CONFIG_CPU_S5PV210 + +extern int s5pv210_init(void); +extern void s5pv210_init_irq(void); +extern void s5pv210_map_io(void); +extern void s5pv210_init_clocks(int xtal); + +#define s5pv210_init_uarts s5pv210_common_init_uarts + +#else +#define s5pv210_init_clocks NULL +#define s5pv210_init_uarts NULL +#define s5pv210_map_io NULL +#define s5pv210_init NULL +#endif diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c new file mode 100644 index 00000000000..25e1eb6de59 --- /dev/null +++ b/arch/arm/plat-s5p/irq.c @@ -0,0 +1,72 @@ +/* arch/arm/plat-s5p/irq.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P - Interrupt handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/hardware/vic.h> + +#include <linux/serial_core.h> +#include <mach/map.h> +#include <plat/regs-timer.h> +#include <plat/regs-serial.h> +#include <plat/cpu.h> +#include <plat/irq-vic-timer.h> +#include <plat/irq-uart.h> + +/* + * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] + * are consecutive when looking up the interrupt in the demux routines. + */ +static struct s3c_uart_irq uart_irqs[] = { + [0] = { + .regs = S5P_VA_UART0, + .base_irq = IRQ_S5P_UART_BASE0, + .parent_irq = IRQ_UART0, + }, + [1] = { + .regs = S5P_VA_UART1, + .base_irq = IRQ_S5P_UART_BASE1, + .parent_irq = IRQ_UART1, + }, + [2] = { + .regs = S5P_VA_UART2, + .base_irq = IRQ_S5P_UART_BASE2, + .parent_irq = IRQ_UART2, + }, +#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 + [3] = { + .regs = S5P_VA_UART3, + .base_irq = IRQ_S5P_UART_BASE3, + .parent_irq = IRQ_UART3, + }, +#endif +}; + +void __init s5p_init_irq(u32 *vic, u32 num_vic) +{ + int irq; + + /* initialize the VICs */ + for (irq = 0; irq < num_vic; irq++) + vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0); + + s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0); + s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1); + s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2); + s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3); + s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4); + + s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); +} diff --git a/arch/arm/plat-s5p/setup-i2c0.c b/arch/arm/plat-s5p/setup-i2c0.c new file mode 100644 index 00000000000..67a66e02a97 --- /dev/null +++ b/arch/arm/plat-s5p/setup-i2c0.c @@ -0,0 +1,25 @@ +/* linux/arch/arm/plat-s5p/setup-i2c0.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * I2C0 GPIO configuration. + * + * Based on plat-s3c64xx/setup-i2c0.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> + +struct platform_device; /* don't need the contents */ + +#include <plat/iic.h> + +void s3c_i2c0_cfg_gpio(struct platform_device *dev) +{ + /* Will be populated later */ +} |