summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-s5p
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-s5p')
-rw-r--r--arch/arm/plat-s5p/Kconfig132
-rw-r--r--arch/arm/plat-s5p/Makefile27
-rw-r--r--arch/arm/plat-s5p/clock.c264
-rw-r--r--arch/arm/plat-s5p/dev-mfc.c73
-rw-r--r--arch/arm/plat-s5p/dev-uart.c137
-rw-r--r--arch/arm/plat-s5p/irq-eint.c219
-rw-r--r--arch/arm/plat-s5p/irq-gpioint.c216
-rw-r--r--arch/arm/plat-s5p/irq-pm.c103
-rw-r--r--arch/arm/plat-s5p/irq.c36
-rw-r--r--arch/arm/plat-s5p/pm.c41
-rw-r--r--arch/arm/plat-s5p/s5p-time.c406
-rw-r--r--arch/arm/plat-s5p/setup-mipiphy.c63
-rw-r--r--arch/arm/plat-s5p/sleep.S81
13 files changed, 0 insertions, 1798 deletions
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
deleted file mode 100644
index 2c1193c5992..00000000000
--- a/arch/arm/plat-s5p/Kconfig
+++ /dev/null
@@ -1,132 +0,0 @@
-# arch/arm/plat-s5p/Kconfig
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-config PLAT_S5P
- bool
- depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
- default y
- select ARM_VIC if !ARCH_EXYNOS
- select ARM_GIC if ARCH_EXYNOS
- select GIC_NON_BANKED if ARCH_EXYNOS4
- select NO_IOPORT
- select ARCH_REQUIRE_GPIOLIB
- select S3C_GPIO_TRACK
- select S5P_GPIO_DRVSTR
- select SAMSUNG_GPIOLIB_4BIT
- select PLAT_SAMSUNG
- select SAMSUNG_CLKSRC
- select SAMSUNG_IRQ_VIC_TIMER
- help
- Base platform code for Samsung's S5P series SoC.
-
-config S5P_EXT_INT
- bool
- help
- Use the external interrupts (other than GPIO interrupts.)
- Note: Do not choose this for S5P6440 and S5P6450.
-
-config S5P_GPIO_INT
- bool
- help
- Common code for the GPIO interrupts (other than external interrupts.)
-
-config S5P_HRT
- bool
- select SAMSUNG_DEV_PWM
- help
- Use the High Resolution timer support
-
-config S5P_DEV_UART
- def_bool y
- depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
-
-config S5P_PM
- bool
- help
- Common code for power management support on S5P and newer SoCs
- Note: Do not select this for S5P6440 and S5P6450.
-
-config S5P_SLEEP
- bool
- help
- Internal config node to apply common S5P sleep management code.
- Can be selected by S5P and newer SoCs with similar sleep procedure.
-
-config S5P_DEV_FIMC0
- bool
- help
- Compile in platform device definitions for FIMC controller 0
-
-config S5P_DEV_FIMC1
- bool
- help
- Compile in platform device definitions for FIMC controller 1
-
-config S5P_DEV_FIMC2
- bool
- help
- Compile in platform device definitions for FIMC controller 2
-
-config S5P_DEV_FIMC3
- bool
- help
- Compile in platform device definitions for FIMC controller 3
-
-config S5P_DEV_JPEG
- bool
- help
- Compile in platform device definitions for JPEG codec
-
-config S5P_DEV_G2D
- bool
- help
- Compile in platform device definitions for G2D device
-
-config S5P_DEV_FIMD0
- bool
- help
- Compile in platform device definitions for FIMD controller 0
-
-config S5P_DEV_I2C_HDMIPHY
- bool
- help
- Compile in platform device definitions for I2C HDMIPHY controller
-
-config S5P_DEV_MFC
- bool
- help
- Compile in platform device definitions for MFC
-
-config S5P_DEV_ONENAND
- bool
- help
- Compile in platform device definition for OneNAND controller
-
-config S5P_DEV_CSIS0
- bool
- help
- Compile in platform device definitions for MIPI-CSIS channel 0
-
-config S5P_DEV_CSIS1
- bool
- help
- Compile in platform device definitions for MIPI-CSIS channel 1
-
-config S5P_DEV_TV
- bool
- help
- Compile in platform device definition for TV interface
-
-config S5P_DEV_USB_EHCI
- bool
- help
- Compile in platform device definition for USB EHCI
-
-config S5P_SETUP_MIPIPHY
- bool
- help
- Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
deleted file mode 100644
index 4953d50707b..00000000000
--- a/arch/arm/plat-s5p/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-# arch/arm/plat-s5p/Makefile
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n := dummy.o
-obj- :=
-
-# Core files
-
-obj-y += clock.o
-obj-y += irq.o
-obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
-obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o
-obj-$(CONFIG_S5P_PM) += pm.o irq-pm.o
-obj-$(CONFIG_S5P_SLEEP) += sleep.o
-obj-$(CONFIG_S5P_HRT) += s5p-time.o
-
-# devices
-
-obj-$(CONFIG_S5P_DEV_UART) += dev-uart.o
-obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o
-obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
deleted file mode 100644
index f68a9bb1194..00000000000
--- a/arch/arm/plat-s5p/clock.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/* linux/arch/arm/plat-s5p/clock.c
- *
- * Copyright 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P - Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <asm/div64.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/s5p-clock.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * clk_ext_xtal_mux.
-*/
-struct clk clk_ext_xtal_mux = {
- .name = "ext_xtal",
- .id = -1,
-};
-
-struct clk clk_xusbxti = {
- .name = "xusbxti",
- .id = -1,
-};
-
-struct clk s5p_clk_27m = {
- .name = "clk_27m",
- .id = -1,
- .rate = 27000000,
-};
-
-/* 48MHz USB Phy clock output */
-struct clk clk_48m = {
- .name = "clk_48m",
- .id = -1,
- .rate = 48000000,
-};
-
-/* APLL clock output
- * No need .ctrlbit, this is always on
-*/
-struct clk clk_fout_apll = {
- .name = "fout_apll",
- .id = -1,
-};
-
-/* BPLL clock output */
-
-struct clk clk_fout_bpll = {
- .name = "fout_bpll",
- .id = -1,
-};
-
-/* CPLL clock output */
-
-struct clk clk_fout_cpll = {
- .name = "fout_cpll",
- .id = -1,
-};
-
-/* MPLL clock output
- * No need .ctrlbit, this is always on
-*/
-struct clk clk_fout_mpll = {
- .name = "fout_mpll",
- .id = -1,
-};
-
-/* EPLL clock output */
-struct clk clk_fout_epll = {
- .name = "fout_epll",
- .id = -1,
- .ctrlbit = (1 << 31),
-};
-
-/* DPLL clock output */
-struct clk clk_fout_dpll = {
- .name = "fout_dpll",
- .id = -1,
- .ctrlbit = (1 << 31),
-};
-
-/* VPLL clock output */
-struct clk clk_fout_vpll = {
- .name = "fout_vpll",
- .id = -1,
- .ctrlbit = (1 << 31),
-};
-
-/* Possible clock sources for APLL Mux */
-static struct clk *clk_src_apll_list[] = {
- [0] = &clk_fin_apll,
- [1] = &clk_fout_apll,
-};
-
-struct clksrc_sources clk_src_apll = {
- .sources = clk_src_apll_list,
- .nr_sources = ARRAY_SIZE(clk_src_apll_list),
-};
-
-/* Possible clock sources for BPLL Mux */
-static struct clk *clk_src_bpll_list[] = {
- [0] = &clk_fin_bpll,
- [1] = &clk_fout_bpll,
-};
-
-struct clksrc_sources clk_src_bpll = {
- .sources = clk_src_bpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_bpll_list),
-};
-
-/* Possible clock sources for CPLL Mux */
-static struct clk *clk_src_cpll_list[] = {
- [0] = &clk_fin_cpll,
- [1] = &clk_fout_cpll,
-};
-
-struct clksrc_sources clk_src_cpll = {
- .sources = clk_src_cpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_cpll_list),
-};
-
-/* Possible clock sources for MPLL Mux */
-static struct clk *clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &clk_fout_mpll,
-};
-
-struct clksrc_sources clk_src_mpll = {
- .sources = clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
-};
-
-/* Possible clock sources for EPLL Mux */
-static struct clk *clk_src_epll_list[] = {
- [0] = &clk_fin_epll,
- [1] = &clk_fout_epll,
-};
-
-struct clksrc_sources clk_src_epll = {
- .sources = clk_src_epll_list,
- .nr_sources = ARRAY_SIZE(clk_src_epll_list),
-};
-
-/* Possible clock sources for DPLL Mux */
-static struct clk *clk_src_dpll_list[] = {
- [0] = &clk_fin_dpll,
- [1] = &clk_fout_dpll,
-};
-
-struct clksrc_sources clk_src_dpll = {
- .sources = clk_src_dpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_dpll_list),
-};
-
-struct clk clk_vpll = {
- .name = "vpll",
- .id = -1,
-};
-
-int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- u32 con;
-
- con = __raw_readl(reg);
- con = enable ? (con | ctrlbit) : (con & ~ctrlbit);
- __raw_writel(con, reg);
- return 0;
-}
-
-int s5p_epll_enable(struct clk *clk, int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
-
- if (enable)
- __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
- else
- __raw_writel(epll_con, S5P_EPLL_CON);
-
- return 0;
-}
-
-unsigned long s5p_epll_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-
-int s5p_spdif_set_rate(struct clk *clk, unsigned long rate)
-{
- struct clk *pclk;
- int ret;
-
- pclk = clk_get_parent(clk);
- if (IS_ERR(pclk))
- return -EINVAL;
-
- ret = pclk->ops->set_rate(pclk, rate);
- clk_put(pclk);
-
- return ret;
-}
-
-unsigned long s5p_spdif_get_rate(struct clk *clk)
-{
- struct clk *pclk;
- int rate;
-
- pclk = clk_get_parent(clk);
- if (IS_ERR(pclk))
- return -EINVAL;
-
- rate = pclk->ops->get_rate(pclk);
- clk_put(pclk);
-
- return rate;
-}
-
-struct clk_ops s5p_sclk_spdif_ops = {
- .set_rate = s5p_spdif_set_rate,
- .get_rate = s5p_spdif_get_rate,
-};
-
-static struct clk *s5p_clks[] __initdata = {
- &clk_ext_xtal_mux,
- &clk_48m,
- &s5p_clk_27m,
- &clk_fout_apll,
- &clk_fout_mpll,
- &clk_fout_epll,
- &clk_fout_dpll,
- &clk_fout_vpll,
- &clk_vpll,
- &clk_xusbxti,
-};
-
-void __init s5p_register_clocks(unsigned long xtal_freq)
-{
- int ret;
-
- clk_ext_xtal_mux.rate = xtal_freq;
-
- ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks));
- if (ret > 0)
- printk(KERN_ERR "Failed to register s5p clocks\n");
-}
diff --git a/arch/arm/plat-s5p/dev-mfc.c b/arch/arm/plat-s5p/dev-mfc.c
deleted file mode 100644
index a30d36b7f61..00000000000
--- a/arch/arm/plat-s5p/dev-mfc.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/arch/arm/plat-s5p/dev-mfc.c
- *
- * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
- *
- * Base S5P MFC resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/memblock.h>
-#include <linux/ioport.h>
-
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-#include <plat/mfc.h>
-
-struct s5p_mfc_reserved_mem {
- phys_addr_t base;
- unsigned long size;
- struct device *dev;
-};
-
-static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
-
-void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
- phys_addr_t lbase, unsigned int lsize)
-{
- int i;
-
- s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
- s5p_mfc_mem[0].base = rbase;
- s5p_mfc_mem[0].size = rsize;
-
- s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
- s5p_mfc_mem[1].base = lbase;
- s5p_mfc_mem[1].size = lsize;
-
- for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
- struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
- if (memblock_remove(area->base, area->size)) {
- printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
- area->size, (unsigned long) area->base);
- area->base = 0;
- }
- }
-}
-
-static int __init s5p_mfc_memory_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
- struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
- if (!area->base)
- continue;
-
- if (dma_declare_coherent_memory(area->dev, area->base,
- area->base, area->size,
- DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0)
- printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n",
- area->size, (unsigned long) area->base);
- }
- return 0;
-}
-device_initcall(s5p_mfc_memory_init);
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
deleted file mode 100644
index c9308db3618..00000000000
--- a/arch/arm/plat-s5p/dev-uart.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/* linux/arch/arm/plat-s5p/dev-uart.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Base S5P UART resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
- /* Serial port registrations */
-
-static struct resource s5p_uart0_resource[] = {
- [0] = {
- .start = S5P_PA_UART0,
- .end = S5P_PA_UART0 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART0,
- .end = IRQ_UART0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5p_uart1_resource[] = {
- [0] = {
- .start = S5P_PA_UART1,
- .end = S5P_PA_UART1 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART1,
- .end = IRQ_UART1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5p_uart2_resource[] = {
- [0] = {
- .start = S5P_PA_UART2,
- .end = S5P_PA_UART2 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART2,
- .end = IRQ_UART2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5p_uart3_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
- [0] = {
- .start = S5P_PA_UART3,
- .end = S5P_PA_UART3 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART3,
- .end = IRQ_UART3,
- .flags = IORESOURCE_IRQ,
- },
-#endif
-};
-
-static struct resource s5p_uart4_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
- [0] = {
- .start = S5P_PA_UART4,
- .end = S5P_PA_UART4 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART4,
- .end = IRQ_UART4,
- .flags = IORESOURCE_IRQ,
- },
-#endif
-};
-
-static struct resource s5p_uart5_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
- [0] = {
- .start = S5P_PA_UART5,
- .end = S5P_PA_UART5 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART5,
- .end = IRQ_UART5,
- .flags = IORESOURCE_IRQ,
- },
-#endif
-};
-
-struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
- [0] = {
- .resources = s5p_uart0_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart0_resource),
- },
- [1] = {
- .resources = s5p_uart1_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart1_resource),
- },
- [2] = {
- .resources = s5p_uart2_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart2_resource),
- },
- [3] = {
- .resources = s5p_uart3_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart3_resource),
- },
- [4] = {
- .resources = s5p_uart4_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart4_resource),
- },
- [5] = {
- .resources = s5p_uart5_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart5_resource),
- },
-};
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
deleted file mode 100644
index 139c050918c..00000000000
--- a/arch/arm/plat-s5p/irq-eint.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/* linux/arch/arm/plat-s5p/irq-eint.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P - IRQ EINT support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-
-#include <asm/hardware/vic.h>
-
-#include <plat/regs-irqtype.h>
-
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include <plat/gpio-cfg.h>
-#include <mach/regs-gpio.h>
-
-static inline void s5p_irq_eint_mask(struct irq_data *data)
-{
- u32 mask;
-
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask |= eint_irq_to_bit(data->irq);
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_eint_unmask(struct irq_data *data)
-{
- u32 mask;
-
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask &= ~(eint_irq_to_bit(data->irq));
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-}
-
-static inline void s5p_irq_eint_ack(struct irq_data *data)
-{
- __raw_writel(eint_irq_to_bit(data->irq),
- S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_eint_maskack(struct irq_data *data)
-{
- /* compiler should in-line these */
- s5p_irq_eint_mask(data);
- s5p_irq_eint_ack(data);
-}
-
-static int s5p_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
- int offs = EINT_OFFSET(data->irq);
- int shift;
- u32 ctrl, mask;
- u32 newvalue = 0;
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S5P_IRQ_TYPE_EDGE_RISING;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- shift = (offs & 0x7) * 4;
- mask = 0x7 << shift;
-
- ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
- ctrl &= ~mask;
- ctrl |= newvalue << shift;
- __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
-
- if ((0 <= offs) && (offs < 8))
- s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
-
- else if ((8 <= offs) && (offs < 16))
- s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
-
- else if ((16 <= offs) && (offs < 24))
- s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
-
- else if ((24 <= offs) && (offs < 32))
- s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
-
- else
- printk(KERN_ERR "No such irq number %d", offs);
-
- return 0;
-}
-
-static struct irq_chip s5p_irq_eint = {
- .name = "s5p-eint",
- .irq_mask = s5p_irq_eint_mask,
- .irq_unmask = s5p_irq_eint_unmask,
- .irq_mask_ack = s5p_irq_eint_maskack,
- .irq_ack = s5p_irq_eint_ack,
- .irq_set_type = s5p_irq_eint_set_type,
-#ifdef CONFIG_PM
- .irq_set_wake = s3c_irqext_wake,
-#endif
-};
-
-/* s5p_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from EINTs 16 to 31. It is designed to be inlined into the specific
- * handler s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void s5p_irq_demux_eint(unsigned int start)
-{
- u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
- u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
- unsigned int irq;
-
- status &= ~mask;
- status &= 0xff;
-
- while (status) {
- irq = fls(status) - 1;
- generic_handle_irq(irq + start);
- status &= ~(1 << irq);
- }
-}
-
-static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
- s5p_irq_demux_eint(IRQ_EINT(16));
- s5p_irq_demux_eint(IRQ_EINT(24));
-}
-
-static inline void s5p_irq_vic_eint_mask(struct irq_data *data)
-{
- void __iomem *base = irq_data_get_irq_chip_data(data);
-
- s5p_irq_eint_mask(data);
- writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void s5p_irq_vic_eint_unmask(struct irq_data *data)
-{
- void __iomem *base = irq_data_get_irq_chip_data(data);
-
- s5p_irq_eint_unmask(data);
- writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE);
-}
-
-static inline void s5p_irq_vic_eint_ack(struct irq_data *data)
-{
- __raw_writel(eint_irq_to_bit(data->irq),
- S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_vic_eint_maskack(struct irq_data *data)
-{
- s5p_irq_vic_eint_mask(data);
- s5p_irq_vic_eint_ack(data);
-}
-
-static struct irq_chip s5p_irq_vic_eint = {
- .name = "s5p_vic_eint",
- .irq_mask = s5p_irq_vic_eint_mask,
- .irq_unmask = s5p_irq_vic_eint_unmask,
- .irq_mask_ack = s5p_irq_vic_eint_maskack,
- .irq_ack = s5p_irq_vic_eint_ack,
- .irq_set_type = s5p_irq_eint_set_type,
-#ifdef CONFIG_PM
- .irq_set_wake = s3c_irqext_wake,
-#endif
-};
-
-static int __init s5p_init_irq_eint(void)
-{
- int irq;
-
- for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++)
- irq_set_chip(irq, &s5p_irq_vic_eint);
-
- for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
- irq_set_chip_and_handler(irq, &s5p_irq_eint, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- irq_set_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31);
- return 0;
-}
-
-arch_initcall(s5p_init_irq_eint);
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
deleted file mode 100644
index 82c7311017a..00000000000
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/* linux/arch/arm/plat-s5p/irq-gpioint.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * Author: Kyungmin Park <kyungmin.park@samsung.com>
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- * Author: Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-
-#include <mach/map.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-
-#include <asm/mach/irq.h>
-
-#define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u)
-
-#define CON_OFFSET 0x700
-#define MASK_OFFSET 0x900
-#define PEND_OFFSET 0xA00
-#define REG_OFFSET(x) ((x) << 2)
-
-struct s5p_gpioint_bank {
- struct list_head list;
- int start;
- int nr_groups;
- int irq;
- struct samsung_gpio_chip **chips;
- void (*handler)(unsigned int, struct irq_desc *);
-};
-
-static LIST_HEAD(banks);
-
-static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type)
-{
- struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- struct irq_chip_type *ct = gc->chip_types;
- unsigned int shift = (d->irq - gc->irq_base) << 2;
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- type = S5P_IRQ_TYPE_EDGE_RISING;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- type = S5P_IRQ_TYPE_EDGE_FALLING;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- type = S5P_IRQ_TYPE_EDGE_BOTH;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- type = S5P_IRQ_TYPE_LEVEL_HIGH;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- type = S5P_IRQ_TYPE_LEVEL_LOW;
- break;
- case IRQ_TYPE_NONE:
- default:
- printk(KERN_WARNING "No irq type\n");
- return -EINVAL;
- }
-
- gc->type_cache &= ~(0x7 << shift);
- gc->type_cache |= type << shift;
- writel(gc->type_cache, gc->reg_base + ct->regs.type);
- return 0;
-}
-
-static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
-{
- struct s5p_gpioint_bank *bank = irq_get_handler_data(irq);
- int group, pend_offset, mask_offset;
- unsigned int pend, mask;
-
- struct irq_chip *chip = irq_get_chip(irq);
- chained_irq_enter(chip, desc);
-
- for (group = 0; group < bank->nr_groups; group++) {
- struct samsung_gpio_chip *chip = bank->chips[group];
- if (!chip)
- continue;
-
- pend_offset = REG_OFFSET(group);
- pend = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset);
- if (!pend)
- continue;
-
- mask_offset = REG_OFFSET(group);
- mask = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset);
- pend &= ~mask;
-
- while (pend) {
- int offset = fls(pend) - 1;
- int real_irq = chip->irq_base + offset;
- generic_handle_irq(real_irq);
- pend &= ~BIT(offset);
- }
- }
- chained_irq_exit(chip, desc);
-}
-
-static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
-{
- static int used_gpioint_groups = 0;
- int group = chip->group;
- struct s5p_gpioint_bank *b, *bank = NULL;
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-
- if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
- return -ENOMEM;
-
- list_for_each_entry(b, &banks, list) {
- if (group >= b->start && group < b->start + b->nr_groups) {
- bank = b;
- break;
- }
- }
- if (!bank)
- return -EINVAL;
-
- if (!bank->handler) {
- bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
- bank->nr_groups, GFP_KERNEL);
- if (!bank->chips)
- return -ENOMEM;
-
- irq_set_chained_handler(bank->irq, s5p_gpioint_handler);
- irq_set_handler_data(bank->irq, bank);
- bank->handler = s5p_gpioint_handler;
- printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n",
- bank->irq);
- }
-
- /*
- * chained GPIO irq has been successfully registered, allocate new gpio
- * int group and assign irq nubmers
- */
- chip->irq_base = S5P_GPIOINT_BASE +
- used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE;
- used_gpioint_groups++;
-
- bank->chips[group - bank->start] = chip;
-
- gc = irq_alloc_generic_chip("s5p_gpioint", 1, chip->irq_base,
- (void __iomem *)GPIO_BASE(chip),
- handle_level_irq);
- if (!gc)
- return -ENOMEM;
- ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack_set_bit;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- ct->chip.irq_set_type = s5p_gpioint_set_type,
- ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start);
- ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start);
- ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start);
- irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio),
- IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
- return 0;
-}
-
-int __init s5p_register_gpio_interrupt(int pin)
-{
- struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
- int offset, group;
- int ret;
-
- if (!my_chip)
- return -EINVAL;
-
- offset = pin - my_chip->chip.base;
- group = my_chip->group;
-
- /* check if the group has been already registered */
- if (my_chip->irq_base)
- return my_chip->irq_base + offset;
-
- /* register gpio group */
- ret = s5p_gpioint_add(my_chip);
- if (ret == 0) {
- my_chip->chip.to_irq = samsung_gpiolib_to_irq;
- printk(KERN_INFO "Registered interrupt support for gpio group %d.\n",
- group);
- return my_chip->irq_base + offset;
- }
- return ret;
-}
-
-int __init s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups)
-{
- struct s5p_gpioint_bank *bank;
-
- bank = kzalloc(sizeof(*bank), GFP_KERNEL);
- if (!bank)
- return -ENOMEM;
-
- bank->start = start;
- bank->nr_groups = nr_groups;
- bank->irq = chain_irq;
-
- list_add_tail(&bank->list, &banks);
- return 0;
-}
diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c
deleted file mode 100644
index d1bfecae6c9..00000000000
--- a/arch/arm/plat-s5p/irq-pm.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/* linux/arch/arm/plat-s5p/irq-pm.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/plat-s3c24xx/irq-pm.c,
- * Copyright (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-
-#include <plat/cpu.h>
-#include <plat/irqs.h>
-#include <plat/pm.h>
-#include <mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-irq.h>
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM,
- * as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow = 0x00000006L;
-unsigned long s3c_irqwake_eintallow = 0xffffffffL;
-
-int s3c_irq_wake(struct irq_data *data, unsigned int state)
-{
- unsigned long irqbit;
- unsigned int irq_rtc_tic, irq_rtc_alarm;
-
-#ifdef CONFIG_ARCH_EXYNOS
- if (soc_is_exynos5250()) {
- irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
- irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
- } else {
- irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC;
- irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM;
- }
-#else
- irq_rtc_tic = IRQ_RTC_TIC;
- irq_rtc_alarm = IRQ_RTC_ALARM;
-#endif
-
- if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
- irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
-
- if (!state)
- s3c_irqwake_intmask |= irqbit;
- else
- s3c_irqwake_intmask &= ~irqbit;
- } else {
- return -ENOENT;
- }
-
- return 0;
-}
-
-static struct sleep_save eint_save[] = {
- SAVE_ITEM(S5P_EINT_CON(0)),
- SAVE_ITEM(S5P_EINT_CON(1)),
- SAVE_ITEM(S5P_EINT_CON(2)),
- SAVE_ITEM(S5P_EINT_CON(3)),
-
- SAVE_ITEM(S5P_EINT_FLTCON(0)),
- SAVE_ITEM(S5P_EINT_FLTCON(1)),
- SAVE_ITEM(S5P_EINT_FLTCON(2)),
- SAVE_ITEM(S5P_EINT_FLTCON(3)),
- SAVE_ITEM(S5P_EINT_FLTCON(4)),
- SAVE_ITEM(S5P_EINT_FLTCON(5)),
- SAVE_ITEM(S5P_EINT_FLTCON(6)),
- SAVE_ITEM(S5P_EINT_FLTCON(7)),
-
- SAVE_ITEM(S5P_EINT_MASK(0)),
- SAVE_ITEM(S5P_EINT_MASK(1)),
- SAVE_ITEM(S5P_EINT_MASK(2)),
- SAVE_ITEM(S5P_EINT_MASK(3)),
-};
-
-int s3c24xx_irq_suspend(void)
-{
- s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save));
-
- return 0;
-}
-
-void s3c24xx_irq_resume(void)
-{
- s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save));
-}
-
diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c
deleted file mode 100644
index afdaa1082b9..00000000000
--- a/arch/arm/plat-s5p/irq.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/plat-s5p/irq.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/regs-timer.h>
-#include <plat/cpu.h>
-#include <plat/irq-vic-timer.h>
-
-void __init s5p_init_irq(u32 *vic, u32 num_vic)
-{
-#ifdef CONFIG_ARM_VIC
- int irq;
-
- /* initialize the VICs */
- for (irq = 0; irq < num_vic; irq++)
- vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
-#endif
-
- s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-}
diff --git a/arch/arm/plat-s5p/pm.c b/arch/arm/plat-s5p/pm.c
deleted file mode 100644
index d15dc47b0e3..00000000000
--- a/arch/arm/plat-s5p/pm.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/arch/arm/plat-s5p/pm.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P Power Manager (Suspend-To-RAM) support
- *
- * Based on arch/arm/plat-s3c24xx/pm.c
- * Copyright (c) 2004,2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/suspend.h>
-#include <plat/pm.h>
-
-#define PFX "s5p pm: "
-
-/* s3c_pm_configure_extint
- *
- * configure all external interrupt pins
-*/
-
-void s3c_pm_configure_extint(void)
-{
- /* nothing here yet */
-}
-
-void s3c_pm_restore_core(void)
-{
- /* nothing here yet */
-}
-
-void s3c_pm_save_core(void)
-{
- /* nothing here yet */
-}
-
diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c
deleted file mode 100644
index 17c0a2c58df..00000000000
--- a/arch/arm/plat-s5p/s5p-time.c
+++ /dev/null
@@ -1,406 +0,0 @@
-/* linux/arch/arm/plat-s5p/s5p-time.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P - Common hr-timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-
-#include <asm/smp_twd.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/sched_clock.h>
-
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/regs-timer.h>
-#include <plat/s5p-time.h>
-
-static struct clk *tin_event;
-static struct clk *tin_source;
-static struct clk *tdiv_event;
-static struct clk *tdiv_source;
-static struct clk *timerclk;
-static struct s5p_timer_source timer_source;
-static unsigned long clock_count_per_tick;
-static void s5p_timer_resume(void);
-
-static void s5p_time_stop(enum s5p_timer_mode mode)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- switch (mode) {
- case S5P_PWM0:
- tcon &= ~S3C2410_TCON_T0START;
- break;
-
- case S5P_PWM1:
- tcon &= ~S3C2410_TCON_T1START;
- break;
-
- case S5P_PWM2:
- tcon &= ~S3C2410_TCON_T2START;
- break;
-
- case S5P_PWM3:
- tcon &= ~S3C2410_TCON_T3START;
- break;
-
- case S5P_PWM4:
- tcon &= ~S3C2410_TCON_T4START;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", mode);
- break;
- }
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- tcnt--;
-
- switch (mode) {
- case S5P_PWM0:
- tcon &= ~(0x0f << 0);
- tcon |= S3C2410_TCON_T0MANUALUPD;
- break;
-
- case S5P_PWM1:
- tcon &= ~(0x0f << 8);
- tcon |= S3C2410_TCON_T1MANUALUPD;
- break;
-
- case S5P_PWM2:
- tcon &= ~(0x0f << 12);
- tcon |= S3C2410_TCON_T2MANUALUPD;
- break;
-
- case S5P_PWM3:
- tcon &= ~(0x0f << 16);
- tcon |= S3C2410_TCON_T3MANUALUPD;
- break;
-
- case S5P_PWM4:
- tcon &= ~(0x07 << 20);
- tcon |= S3C2410_TCON_T4MANUALUPD;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", mode);
- break;
- }
-
- __raw_writel(tcnt, S3C2410_TCNTB(mode));
- __raw_writel(tcnt, S3C2410_TCMPB(mode));
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- switch (mode) {
- case S5P_PWM0:
- tcon |= S3C2410_TCON_T0START;
- tcon &= ~S3C2410_TCON_T0MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T0RELOAD;
- else
- tcon &= ~S3C2410_TCON_T0RELOAD;
- break;
-
- case S5P_PWM1:
- tcon |= S3C2410_TCON_T1START;
- tcon &= ~S3C2410_TCON_T1MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T1RELOAD;
- else
- tcon &= ~S3C2410_TCON_T1RELOAD;
- break;
-
- case S5P_PWM2:
- tcon |= S3C2410_TCON_T2START;
- tcon &= ~S3C2410_TCON_T2MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T2RELOAD;
- else
- tcon &= ~S3C2410_TCON_T2RELOAD;
- break;
-
- case S5P_PWM3:
- tcon |= S3C2410_TCON_T3START;
- tcon &= ~S3C2410_TCON_T3MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T3RELOAD;
- else
- tcon &= ~S3C2410_TCON_T3RELOAD;
- break;
-
- case S5P_PWM4:
- tcon |= S3C2410_TCON_T4START;
- tcon &= ~S3C2410_TCON_T4MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T4RELOAD;
- else
- tcon &= ~S3C2410_TCON_T4RELOAD;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", mode);
- break;
- }
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static int s5p_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- s5p_time_setup(timer_source.event_id, cycles);
- s5p_time_start(timer_source.event_id, NON_PERIODIC);
-
- return 0;
-}
-
-static void s5p_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- s5p_time_stop(timer_source.event_id);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- s5p_time_setup(timer_source.event_id, clock_count_per_tick);
- s5p_time_start(timer_source.event_id, PERIODIC);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- break;
-
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- break;
-
- case CLOCK_EVT_MODE_RESUME:
- s5p_timer_resume();
- break;
- }
-}
-
-static void s5p_timer_resume(void)
-{
- /* event timer restart */
- s5p_time_setup(timer_source.event_id, clock_count_per_tick);
- s5p_time_start(timer_source.event_id, PERIODIC);
-
- /* source timer restart */
- s5p_time_setup(timer_source.source_id, TCNT_MAX);
- s5p_time_start(timer_source.source_id, PERIODIC);
-}
-
-void __init s5p_set_timer_source(enum s5p_timer_mode event,
- enum s5p_timer_mode source)
-{
- s3c_device_timer[event].dev.bus = &platform_bus_type;
- s3c_device_timer[source].dev.bus = &platform_bus_type;
-
- timer_source.event_id = event;
- timer_source.source_id = source;
-}
-
-static struct clock_event_device time_event_device = {
- .name = "s5p_event_timer",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .rating = 200,
- .set_next_event = s5p_set_next_event,
- .set_mode = s5p_set_mode,
-};
-
-static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction s5p_clock_event_irq = {
- .name = "s5p_time_irq",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = s5p_clock_event_isr,
- .dev_id = &time_event_device,
-};
-
-static void __init s5p_clockevent_init(void)
-{
- unsigned long pclk;
- unsigned long clock_rate;
- unsigned int irq_number;
- struct clk *tscaler;
-
- pclk = clk_get_rate(timerclk);
-
- tscaler = clk_get_parent(tdiv_event);
-
- clk_set_rate(tscaler, pclk / 2);
- clk_set_rate(tdiv_event, pclk / 2);
- clk_set_parent(tin_event, tdiv_event);
-
- clock_rate = clk_get_rate(tin_event);
- clock_count_per_tick = clock_rate / HZ;
-
- clockevents_calc_mult_shift(&time_event_device,
- clock_rate, S5PTIMER_MIN_RANGE);
- time_event_device.max_delta_ns =
- clockevent_delta2ns(-1, &time_event_device);
- time_event_device.min_delta_ns =
- clockevent_delta2ns(1, &time_event_device);
-
- time_event_device.cpumask = cpumask_of(0);
- clockevents_register_device(&time_event_device);
-
- irq_number = timer_source.event_id + IRQ_TIMER0;
- setup_irq(irq_number, &s5p_clock_event_irq);
-}
-
-static void __iomem *s5p_timer_reg(void)
-{
- unsigned long offset = 0;
-
- switch (timer_source.source_id) {
- case S5P_PWM0:
- case S5P_PWM1:
- case S5P_PWM2:
- case S5P_PWM3:
- offset = (timer_source.source_id * 0x0c) + 0x14;
- break;
-
- case S5P_PWM4:
- offset = 0x40;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
- return NULL;
- }
-
- return S3C_TIMERREG(offset);
-}
-
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by U300 implementation.)
- */
-static u32 notrace s5p_read_sched_clock(void)
-{
- void __iomem *reg = s5p_timer_reg();
-
- if (!reg)
- return 0;
-
- return ~__raw_readl(reg);
-}
-
-static void __init s5p_clocksource_init(void)
-{
- unsigned long pclk;
- unsigned long clock_rate;
-
- pclk = clk_get_rate(timerclk);
-
- clk_set_rate(tdiv_source, pclk / 2);
- clk_set_parent(tin_source, tdiv_source);
-
- clock_rate = clk_get_rate(tin_source);
-
- s5p_time_setup(timer_source.source_id, TCNT_MAX);
- s5p_time_start(timer_source.source_id, PERIODIC);
-
- setup_sched_clock(s5p_read_sched_clock, 32, clock_rate);
-
- if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer",
- clock_rate, 250, 32, clocksource_mmio_readl_down))
- panic("s5p_clocksource_timer: can't register clocksource\n");
-}
-
-static void __init s5p_timer_resources(void)
-{
-
- unsigned long event_id = timer_source.event_id;
- unsigned long source_id = timer_source.source_id;
- char devname[15];
-
- timerclk = clk_get(NULL, "timers");
- if (IS_ERR(timerclk))
- panic("failed to get timers clock for timer");
-
- clk_enable(timerclk);
-
- sprintf(devname, "s3c24xx-pwm.%lu", event_id);
- s3c_device_timer[event_id].id = event_id;
- s3c_device_timer[event_id].dev.init_name = devname;
-
- tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin");
- if (IS_ERR(tin_event))
- panic("failed to get pwm-tin clock for event timer");
-
- tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv");
- if (IS_ERR(tdiv_event))
- panic("failed to get pwm-tdiv clock for event timer");
-
- clk_enable(tin_event);
-
- sprintf(devname, "s3c24xx-pwm.%lu", source_id);
- s3c_device_timer[source_id].id = source_id;
- s3c_device_timer[source_id].dev.init_name = devname;
-
- tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin");
- if (IS_ERR(tin_source))
- panic("failed to get pwm-tin clock for source timer");
-
- tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv");
- if (IS_ERR(tdiv_source))
- panic("failed to get pwm-tdiv clock for source timer");
-
- clk_enable(tin_source);
-}
-
-static void __init s5p_timer_init(void)
-{
- s5p_timer_resources();
- s5p_clockevent_init();
- s5p_clocksource_init();
-}
-
-struct sys_timer s5p_timer = {
- .init = s5p_timer_init,
-};
diff --git a/arch/arm/plat-s5p/setup-mipiphy.c b/arch/arm/plat-s5p/setup-mipiphy.c
deleted file mode 100644
index 683c466c0e6..00000000000
--- a/arch/arm/plat-s5p/setup-mipiphy.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <mach/regs-clock.h>
-
-static int __s5p_mipi_phy_control(struct platform_device *pdev,
- bool on, u32 reset)
-{
- static DEFINE_SPINLOCK(lock);
- void __iomem *addr;
- unsigned long flags;
- int pid;
- u32 cfg;
-
- if (!pdev)
- return -EINVAL;
-
- pid = (pdev->id == -1) ? 0 : pdev->id;
-
- if (pid != 0 && pid != 1)
- return -EINVAL;
-
- addr = S5P_MIPI_DPHY_CONTROL(pid);
-
- spin_lock_irqsave(&lock, flags);
-
- cfg = __raw_readl(addr);
- cfg = on ? (cfg | reset) : (cfg & ~reset);
- __raw_writel(cfg, addr);
-
- if (on) {
- cfg |= S5P_MIPI_DPHY_ENABLE;
- } else if (!(cfg & (S5P_MIPI_DPHY_SRESETN |
- S5P_MIPI_DPHY_MRESETN) & ~reset)) {
- cfg &= ~S5P_MIPI_DPHY_ENABLE;
- }
-
- __raw_writel(cfg, addr);
- spin_unlock_irqrestore(&lock, flags);
-
- return 0;
-}
-
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on)
-{
- return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_SRESETN);
-}
-
-int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
-{
- return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_MRESETN);
-}
diff --git a/arch/arm/plat-s5p/sleep.S b/arch/arm/plat-s5p/sleep.S
deleted file mode 100644
index 006bd01eda0..00000000000
--- a/arch/arm/plat-s5p/sleep.S
+++ /dev/null
@@ -1,81 +0,0 @@
-/* linux/arch/arm/plat-s5p/sleep.S
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Common S5P Sleep Code
- * Based on S3C64XX sleep code by:
- * Ben Dooks, (c) 2008 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
-
-/*
- * The following code is located into the .data section. This is to
- * allow l2x0_regs_phys to be accessed with a relative load while we
- * can't rely on any MMU translation. We could have put l2x0_regs_phys
- * in the .text section as well, but some setups might insist on it to
- * be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
- */
- .data
- .align
-
- /*
- * sleep magic, to allow the bootloader to check for an valid
- * image to resume to. Must be the first word before the
- * s3c_cpu_resume entry.
- */
-
- .word 0x2bedf00d
-
- /*
- * s3c_cpu_resume
- *
- * resume code entry for bootloader to call
- */
-
-ENTRY(s3c_cpu_resume)
-#ifdef CONFIG_CACHE_L2X0
- adr r0, l2x0_regs_phys
- ldr r0, [r0]
- ldr r1, [r0, #L2X0_R_PHY_BASE]
- ldr r2, [r1, #L2X0_CTRL]
- tst r2, #0x1
- bne resume_l2on
- ldr r2, [r0, #L2X0_R_AUX_CTRL]
- str r2, [r1, #L2X0_AUX_CTRL]
- ldr r2, [r0, #L2X0_R_TAG_LATENCY]
- str r2, [r1, #L2X0_TAG_LATENCY_CTRL]
- ldr r2, [r0, #L2X0_R_DATA_LATENCY]
- str r2, [r1, #L2X0_DATA_LATENCY_CTRL]
- ldr r2, [r0, #L2X0_R_PREFETCH_CTRL]
- str r2, [r1, #L2X0_PREFETCH_CTRL]
- ldr r2, [r0, #L2X0_R_PWR_CTRL]
- str r2, [r1, #L2X0_POWER_CTRL]
- mov r2, #1
- str r2, [r1, #L2X0_CTRL]
-resume_l2on:
-#endif
- b cpu_resume
-ENDPROC(s3c_cpu_resume)
-#ifdef CONFIG_CACHE_L2X0
- .globl l2x0_regs_phys
-l2x0_regs_phys:
- .long 0
-#endif
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-25 10:26:10 +0000