summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-s5pc1xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-s5pc1xx')
-rw-r--r--arch/arm/plat-s5pc1xx/Kconfig18
-rw-r--r--arch/arm/plat-s5pc1xx/Makefile11
-rw-r--r--arch/arm/plat-s5pc1xx/clock.c728
-rw-r--r--arch/arm/plat-s5pc1xx/cpu.c10
-rw-r--r--arch/arm/plat-s5pc1xx/gpio-config.c62
-rw-r--r--arch/arm/plat-s5pc1xx/gpiolib.c503
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h32
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h44
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/irqs.h15
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/regs-clock.h212
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h70
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/regs-power.h84
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/s5pc100.h5
-rw-r--r--arch/arm/plat-s5pc1xx/irq-eint.c281
-rw-r--r--arch/arm/plat-s5pc1xx/irq-gpio.c266
-rw-r--r--arch/arm/plat-s5pc1xx/irq.c2
-rw-r--r--arch/arm/plat-s5pc1xx/s5pc100-clock.c1555
-rw-r--r--arch/arm/plat-s5pc1xx/setup-fb-24bpp.c49
-rw-r--r--arch/arm/plat-s5pc1xx/setup-i2c0.c7
-rw-r--r--arch/arm/plat-s5pc1xx/setup-i2c1.c7
-rw-r--r--arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c86
21 files changed, 3121 insertions, 926 deletions
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index a8a711c3c06..1608e62b0c9 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -15,6 +15,9 @@ config PLAT_S5PC1XX
select ARCH_REQUIRE_GPIOLIB
select S3C_GPIO_TRACK
select S3C_GPIO_PULL_UPDOWN
+ select S3C_GPIO_CFG_S3C24XX
+ select S3C_GPIO_CFG_S3C64XX
+ select S5P_GPIO_CFG_S5PC1XX
help
Base platform code for any Samsung S5PC1XX device
@@ -34,7 +37,12 @@ config CPU_S5PC100_CLOCK
# platform specific device setup
-config S5PC100_SETUP_I2C0
+config S5PC1XX_SETUP_FB_24BPP
+ bool
+ help
+ Common setup code for S5PC1XX with an 24bpp RGB display helper.
+
+config S5PC1XX_SETUP_I2C0
bool
default y
help
@@ -43,8 +51,14 @@ config S5PC100_SETUP_I2C0
Note, currently since i2c0 is always compiled, this setup helper
is always compiled with it.
-config S5PC100_SETUP_I2C1
+config S5PC1XX_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
+
+config S5PC1XX_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for SDHCI gpio.
+
endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
index f1ecb2c37ee..278f2680608 100644
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -13,7 +13,9 @@ obj- :=
obj-y += dev-uart.o
obj-y += cpu.o
-obj-y += irq.o
+obj-y += irq.o irq-gpio.o irq-eint.o
+obj-y += clock.o
+obj-y += gpiolib.o
# CPU support
@@ -22,5 +24,8 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
# Device setup
-obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
+obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
new file mode 100644
index 00000000000..26c21d84979
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/clock.c
@@ -0,0 +1,728 @@
+/* linux/arch/arm/plat-s5pc1xx/clock.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * S5PC1XX Base clock support
+ *
+ * Based on plat-s3c64xx/clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-clock.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+struct clk clk_27m = {
+ .name = "clk_27m",
+ .id = -1,
+ .rate = 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+ unsigned long flags;
+ u32 val;
+
+ /* can't rely on clock lock, this register has other usages */
+ local_irq_save(flags);
+
+ val = __raw_readl(S5PC100_CLKSRC1);
+ if (enable)
+ val |= S5PC100_CLKSRC1_CLK48M_MASK;
+ else
+ val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+ __raw_writel(val, S5PC100_CLKSRC1);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+struct clk clk_48m = {
+ .name = "clk_48m",
+ .id = -1,
+ .rate = 48000000,
+ .enable = clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+ .name = "clk_54m",
+ .id = -1,
+ .rate = 54000000,
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+ clk->rate = rate;
+ return 0;
+}
+
+static int clk_dummy_enable(struct clk *clk, int enable)
+{
+ return 0;
+}
+
+struct clk clk_hd0 = {
+ .name = "hclkd0",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+ .set_rate = clk_default_setrate,
+ .enable = clk_dummy_enable,
+};
+
+struct clk clk_pd0 = {
+ .name = "pclkd0",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+ .set_rate = clk_default_setrate,
+ .enable = clk_dummy_enable,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ u32 con;
+
+ con = __raw_readl(reg);
+ if (enable)
+ con |= ctrlbit;
+ else
+ con &= ~ctrlbit;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk s5pc100_init_clocks_disable[] = {
+ {
+ .name = "dsi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_DSI,
+ }, {
+ .name = "csi",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_CSI,
+ }, {
+ .name = "ccan",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_CCAN0,
+ }, {
+ .name = "ccan",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_CCAN1,
+ }, {
+ .name = "keypad",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
+ }, {
+ .name = "hclkd2",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc100_clk_d20_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2,
+ }, {
+ .name = "iis-d2",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc100_clk_d20_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D20_I2SD2,
+ },
+};
+
+static struct clk s5pc100_init_clocks[] = {
+ /* System1 (D0_0) devices */
+ {
+ .name = "intc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_INTC,
+ }, {
+ .name = "tzic",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_TZIC,
+ }, {
+ .name = "cf-ata",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_CFCON,
+ }, {
+ .name = "mdma",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_MDMA,
+ }, {
+ .name = "g2d",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_G2D,
+ }, {
+ .name = "secss",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_SECSS,
+ }, {
+ .name = "cssys",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_CSSYS,
+ },
+
+ /* Memory (D0_1) devices */
+ {
+ .name = "dmc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_DMC,
+ }, {
+ .name = "sromc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_SROMC,
+ }, {
+ .name = "onenand",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_ONENAND,
+ }, {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_NFCON,
+ }, {
+ .name = "intmem",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_INTMEM,
+ }, {
+ .name = "ebi",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_EBI,
+ },
+
+ /* System2 (D0_2) devices */
+ {
+ .name = "seckey",
+ .id = -1,
+ .parent = &clk_pd0,
+ .enable = s5pc100_clk_d02_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D02_SECKEY,
+ }, {
+ .name = "sdm",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d02_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D02_SDM,
+ },
+
+ /* File (D1_0) devices */
+ {
+ .name = "pdma",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_PDMA0,
+ }, {
+ .name = "pdma",
+ .id = 1,
+ .parent = &clk_h,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_PDMA1,
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_USBHOST,
+ }, {
+ .name = "otg",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_USBOTG,
+ }, {
+ .name = "modem",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF,
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0,
+ }, {
+ .name = "hsmmc",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1,
+ }, {
+ .name = "hsmmc",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2,
+ },
+
+ /* Multimedia1 (D1_1) devices */
+ {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_LCD,
+ }, {
+ .name = "rotator",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR,
+ }, {
+ .name = "fimc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC0,
+ }, {
+ .name = "fimc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC1,
+ }, {
+ .name = "fimc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC2,
+ }, {
+ .name = "jpeg",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_JPEG,
+ }, {
+ .name = "g3d",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_G3D,
+ },
+
+ /* Multimedia2 (D1_2) devices */
+ {
+ .name = "tv",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_TV,
+ }, {
+ .name = "vp",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_VP,
+ }, {
+ .name = "mixer",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_MIXER,
+ }, {
+ .name = "hdmi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_HDMI,
+ }, {
+ .name = "mfc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_MFC,
+ },
+
+ /* System (D1_3) devices */
+ {
+ .name = "chipid",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_CHIPID,
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_GPIO,
+ }, {
+ .name = "apc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_APC,
+ }, {
+ .name = "iec",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_IEC,
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_PWM,
+ }, {
+ .name = "systimer",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_WDT,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_RTC,
+ },
+
+ /* Connectivity (D1_4) devices */
+ {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART2,
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART3,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_IIC,
+ }, {
+ .name = "hdmi-i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC,
+ }, {
+ .name = "spi",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI0,
+ }, {
+ .name = "spi",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI1,
+ }, {
+ .name = "spi",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI2,
+ }, {
+ .name = "irda",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_IRDA,
+ }, {
+ .name = "hsitx",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HSITX,
+ }, {
+ .name = "hsirx",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HSIRX,
+ },
+
+ /* Audio (D1_5) devices */
+ {
+ .name = "iis",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS0,
+ }, {
+ .name = "iis",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS1,
+ }, {
+ .name = "iis",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS2,
+ }, {
+ .name = "ac97",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_AC97,
+ }, {
+ .name = "pcm",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_PCM0,
+ }, {
+ .name = "pcm",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_PCM1,
+ }, {
+ .name = "spdif",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_SPDIF,
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_TSADC,
+ }, {
+ .name = "cg",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_CG,
+ },
+
+ /* Audio (D2_0) devices: all disabled */
+
+ /* Special Clocks 0 */
+ {
+ .name = "sclk_hpm",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_HPM,
+ }, {
+ .name = "sclk_onenand",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND,
+ }, {
+ .name = "spi_48",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48,
+ }, {
+ .name = "spi_48",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48,
+ }, {
+ .name = "spi_48",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48,
+ }, {
+ .name = "mmc_48",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48,
+ }, {
+ .name = "mmc_48",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48,
+ }, {
+ .name = "mmc_48",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48,
+ },
+ /* Special Clocks 1 */
+};
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_epll,
+ &clk_27m,
+ &clk_48m,
+ &clk_54m,
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+ int size;
+
+ s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+ clkp = s5pc100_init_clocks;
+ size = ARRAY_SIZE(s5pc100_init_clocks);
+
+ for (ptr = 0; ptr < size; ptr++, clkp++) {
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
+ clkp = s5pc100_init_clocks_disable;
+ size = ARRAY_SIZE(s5pc100_init_clocks_disable);
+
+ for (ptr = 0; ptr < size; ptr++, clkp++) {
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+
+ (clkp->enable)(clkp, 0);
+ }
+
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
index 715a7330794..02baeaa2a12 100644
--- a/arch/arm/plat-s5pc1xx/cpu.c
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -55,6 +55,16 @@ static struct cpu_table cpu_ids[] __initdata = {
static struct map_desc s5pc1xx_iodesc[] __initdata = {
{
+ .virtual = (unsigned long)S5PC1XX_VA_CLK_OTHER,
+ .pfn = __phys_to_pfn(S5PC1XX_PA_CLK_OTHER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_GPIO,
+ .pfn = __phys_to_pfn(S5PC100_PA_GPIO),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
.virtual = (unsigned long)S5PC1XX_VA_CHIPID,
.pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID),
.length = SZ_16,
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
new file mode 100644
index 00000000000..bba675df9c7
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/gpio-config.c
@@ -0,0 +1,62 @@
+/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * S5PC1XX GPIO Configuration.
+ *
+ * Based on plat-s3c64xx/gpio-config.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/gpio-core.h>
+#include <plat/gpio-cfg-s5pc1xx.h>
+
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ void __iomem *reg;
+ int shift = off * 2;
+ u32 drvstr;
+
+ if (!chip)
+ return -EINVAL;
+
+ reg = chip->base + 0x0C;
+
+ drvstr = __raw_readl(reg);
+ drvstr = 0xffff & (0x3 << shift);
+ drvstr = drvstr >> shift;
+
+ return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
+ s5p_gpio_drvstr_t drvstr)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ void __iomem *reg;
+ int shift = off * 2;
+ u32 tmp;
+
+ if (!chip)
+ return -EINVAL;
+
+ reg = chip->base + 0x0C;
+
+ tmp = __raw_readl(reg);
+ tmp |= drvstr << shift;
+
+ __raw_writel(tmp, reg);
+
+ return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c
new file mode 100644
index 00000000000..facb410e7a7
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/gpiolib.c
@@ -0,0 +1,503 @@
+/*
+ * arch/arm/plat-s5pc1xx/gpiolib.c
+ *
+ * Copyright 2009 Samsung Electronics Co
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S5PC1XX - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <mach/gpio-core.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/regs-gpio.h>
+
+/* S5PC100 GPIO bank summary:
+ *
+ * Bank GPIOs Style INT Type
+ * A0 8 4Bit GPIO_INT0
+ * A1 5 4Bit GPIO_INT1
+ * B 8 4Bit GPIO_INT2
+ * C 5 4Bit GPIO_INT3
+ * D 7 4Bit GPIO_INT4
+ * E0 8 4Bit GPIO_INT5
+ * E1 6 4Bit GPIO_INT6
+ * F0 8 4Bit GPIO_INT7
+ * F1 8 4Bit GPIO_INT8
+ * F2 8 4Bit GPIO_INT9
+ * F3 4 4Bit GPIO_INT10
+ * G0 8 4Bit GPIO_INT11
+ * G1 3 4Bit GPIO_INT12
+ * G2 7 4Bit GPIO_INT13
+ * G3 7 4Bit GPIO_INT14
+ * H0 8 4Bit WKUP_INT
+ * H1 8 4Bit WKUP_INT
+ * H2 8 4Bit WKUP_INT
+ * H3 8 4Bit WKUP_INT
+ * I 8 4Bit GPIO_INT15
+ * J0 8 4Bit GPIO_INT16
+ * J1 5 4Bit GPIO_INT17
+ * J2 8 4Bit GPIO_INT18
+ * J3 8 4Bit GPIO_INT19
+ * J4 4 4Bit GPIO_INT20
+ * K0 8 4Bit None
+ * K1 6 4Bit None
+ * K2 8 4Bit None
+ * K3 8 4Bit None
+ * L0 8 4Bit None
+ * L1 8 4Bit None
+ * L2 8 4Bit None
+ * L3 8 4Bit None
+ */
+
+#define OFF_GPCON (0x00)
+#define OFF_GPDAT (0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
+#if 1
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+/* The s5pc1xx_gpiolib routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ * bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+ */
+
+static int s5pc1xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+
+ con = __raw_readl(base + OFF_GPCON);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, base + OFF_GPCON);
+
+ gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+ return 0;
+}
+
+static int s5pc1xx_gpiolib_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+ unsigned long dat;
+
+ con = __raw_readl(base + OFF_GPCON);
+ con &= ~(0xf << con_4bit_shift(offset));
+ con |= 0x1 << con_4bit_shift(offset);
+
+ dat = __raw_readl(base + OFF_GPDAT);
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(dat, base + OFF_GPDAT);
+ __raw_writel(con, base + OFF_GPCON);
+ __raw_writel(dat, base + OFF_GPDAT);
+
+ gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+ return 0;
+}
+
+static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+ return S3C_IRQ_GPIO(chip->base + offset);
+}
+
+static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
+{
+ int base;
+
+ base = chip->base - S5PC100_GPH0(0);
+ if (base == 0)
+ return IRQ_EINT(offset);
+ base = chip->base - S5PC100_GPH1(0);
+ if (base == 0)
+ return IRQ_EINT(8 + offset);
+ base = chip->base - S5PC100_GPH2(0);
+ if (base == 0)
+ return IRQ_EINT(16 + offset);
+ base = chip->base - S5PC100_GPH3(0);
+ if (base == 0)
+ return IRQ_EINT(24 + offset);
+ return -EINVAL;
+}
+
+static struct s3c_gpio_cfg gpio_cfg = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_eint = {
+ .cfg_eint = 0xf,
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
+ {
+ .base = S5PC100_GPA0_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPA0(0),
+ .ngpio = S5PC100_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .base = S5PC100_GPA1_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPA1(0),
+ .ngpio = S5PC100_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .base = S5PC100_GPB_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPB(0),
+ .ngpio = S5PC100_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .base = S5PC100_GPC_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPC(0),
+ .ngpio = S5PC100_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .base = S5PC100_GPD_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPD(0),
+ .ngpio = S5PC100_GPIO_D_NR,
+ .label = "GPD",
+ },
+ }, {
+ .base = S5PC100_GPE0_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPE0(0),
+ .ngpio = S5PC100_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .base = S5PC100_GPE1_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPE1(0),
+ .ngpio = S5PC100_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .base = S5PC100_GPF0_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPF0(0),
+ .ngpio = S5PC100_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .base = S5PC100_GPF1_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPF1(0),
+ .ngpio = S5PC100_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .base = S5PC100_GPF2_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPF2(0),
+ .ngpio = S5PC100_GPIO_F2_NR,
+ .label = "GPF2",
+ },
+ }, {
+ .base = S5PC100_GPF3_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPF3(0),
+ .ngpio = S5PC100_GPIO_F3_NR,
+ .label = "GPF3",
+ },
+ }, {
+ .base = S5PC100_GPG0_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPG0(0),
+ .ngpio = S5PC100_GPIO_G0_NR,
+ .label = "GPG0",
+ },
+ }, {
+ .base = S5PC100_GPG1_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPG1(0),
+ .ngpio = S5PC100_GPIO_G1_NR,
+ .label = "GPG1",
+ },
+ }, {
+ .base = S5PC100_GPG2_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPG2(0),
+ .ngpio = S5PC100_GPIO_G2_NR,
+ .label = "GPG2",
+ },
+ }, {
+ .base = S5PC100_GPG3_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPG3(0),
+ .ngpio = S5PC100_GPIO_G3_NR,
+ .label = "GPG3",
+ },
+ }, {
+ .base = S5PC100_GPH0_BASE,
+ .config = &gpio_cfg_eint,
+ .chip = {
+ .base = S5PC100_GPH0(0),
+ .ngpio = S5PC100_GPIO_H0_NR,
+ .label = "GPH0",
+ },
+ }, {
+ .base = S5PC100_GPH1_BASE,
+ .config = &gpio_cfg_eint,
+ .chip = {
+ .base = S5PC100_GPH1(0),
+ .ngpio = S5PC100_GPIO_H1_NR,
+ .label = "GPH1",
+ },
+ }, {
+ .base = S5PC100_GPH2_BASE,
+ .config = &gpio_cfg_eint,
+ .chip = {
+ .base = S5PC100_GPH2(0),
+ .ngpio = S5PC100_GPIO_H2_NR,
+ .label = "GPH2",
+ },
+ }, {
+ .base = S5PC100_GPH3_BASE,
+ .config = &gpio_cfg_eint,
+ .chip = {
+ .base = S5PC100_GPH3(0),
+ .ngpio = S5PC100_GPIO_H3_NR,
+ .label = "GPH3",
+ },
+ }, {
+ .base = S5PC100_GPI_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPI(0),
+ .ngpio = S5PC100_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .base = S5PC100_GPJ0_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPJ0(0),
+ .ngpio = S5PC100_GPIO_J0_NR,
+ .label = "GPJ0",
+ },
+ }, {
+ .base = S5PC100_GPJ1_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPJ1(0),
+ .ngpio = S5PC100_GPIO_J1_NR,
+ .label = "GPJ1",
+ },
+ }, {
+ .base = S5PC100_GPJ2_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPJ2(0),
+ .ngpio = S5PC100_GPIO_J2_NR,
+ .label = "GPJ2",
+ },
+ }, {
+ .base = S5PC100_GPJ3_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPJ3(0),
+ .ngpio = S5PC100_GPIO_J3_NR,
+ .label = "GPJ3",
+ },
+ }, {
+ .base = S5PC100_GPJ4_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPJ4(0),
+ .ngpio = S5PC100_GPIO_J4_NR,
+ .label = "GPJ4",
+ },
+ }, {
+ .base = S5PC100_GPK0_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPK0(0),
+ .ngpio = S5PC100_GPIO_K0_NR,
+ .label = "GPK0",
+ },
+ }, {
+ .base = S5PC100_GPK1_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPK1(0),
+ .ngpio = S5PC100_GPIO_K1_NR,
+ .label = "GPK1",
+ },
+ }, {
+ .base = S5PC100_GPK2_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPK2(0),
+ .ngpio = S5PC100_GPIO_K2_NR,
+ .label = "GPK2",
+ },
+ }, {
+ .base = S5PC100_GPK3_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPK3(0),
+ .ngpio = S5PC100_GPIO_K3_NR,
+ .label = "GPK3",
+ },
+ }, {
+ .base = S5PC100_GPL0_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPL0(0),
+ .ngpio = S5PC100_GPIO_L0_NR,
+ .label = "GPL0",
+ },
+ }, {
+ .base = S5PC100_GPL1_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPL1(0),
+ .ngpio = S5PC100_GPIO_L1_NR,
+ .label = "GPL1",
+ },
+ }, {
+ .base = S5PC100_GPL2_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPL2(0),
+ .ngpio = S5PC100_GPIO_L2_NR,
+ .label = "GPL2",
+ },
+ }, {
+ .base = S5PC100_GPL3_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPL3(0),
+ .ngpio = S5PC100_GPIO_L3_NR,
+ .label = "GPL3",
+ },
+ }, {
+ .base = S5PC100_GPL4_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPL4(0),
+ .ngpio = S5PC100_GPIO_L4_NR,
+ .label = "GPL4",
+ },
+ },
+};
+
+/* FIXME move from irq-gpio.c */
+extern struct irq_chip s5pc1xx_gpioint;
+extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
+
+static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip)
+{
+ chip->chip.direction_input = s5pc1xx_gpiolib_input;
+ chip->chip.direction_output = s5pc1xx_gpiolib_output;
+ chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+
+ /* Interrupt */
+ if (chip->config == &gpio_cfg) {
+ int i, irq;
+
+ chip->chip.to_irq = s5pc1xx_gpiolib_to_irq;
+
+ for (i = 0; i < chip->chip.ngpio; i++) {
+ irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
+ set_irq_chip(irq, &s5pc1xx_gpioint);
+ set_irq_data(irq, &chip->chip);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+ } else if (chip->config == &gpio_cfg_eint)
+ chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
+}
+
+static __init void s5pc1xx_gpiolib_add(struct s3c_gpio_chip *chips,
+ int nr_chips,
+ void (*fn)(struct s3c_gpio_chip *))
+{
+ for (; nr_chips > 0; nr_chips--, chips++) {
+ if (fn)
+ (fn)(chips);
+ s3c_gpiolib_add(chips);
+ }
+}
+
+static __init int s5pc1xx_gpiolib_init(void)
+{
+ struct s3c_gpio_chip *chips;
+ int nr_chips;
+
+ chips = s5pc100_gpio_chips;
+ nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+
+ s5pc1xx_gpiolib_add(chips, nr_chips, s5pc1xx_gpiolib_link);
+ /* Interrupt */
+ set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
+
+ return 0;
+}
+core_initcall(s5pc1xx_gpiolib_init);
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
new file mode 100644
index 00000000000..72ad59f61ef
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
@@ -0,0 +1,32 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
+ *
+ * Copyright 2009 Samsung Electronic
+ *
+ * S5PC1XX Platform - GPIO pin configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This file contains the necessary definitions to get the basic gpio
+ * pin configuration done such as setting a pin to input or output or
+ * changing the pull-{up,down} configurations.
+ */
+
+#ifndef __GPIO_CFG_S5PC1XX_H
+#define __GPIO_CFG_S5PC1XX_H __FILE__
+
+typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
+
+#define S5P_GPIO_DRVSTR_LV1 0x00
+#define S5P_GPIO_DRVSTR_LV2 0x01
+#define S5P_GPIO_DRVSTR_LV3 0x10
+#define S5P_GPIO_DRVSTR_LV4 0x11
+
+extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
+
+extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
+ s5p_gpio_drvstr_t drvstr);
+
+#endif /* __GPIO_CFG_S5PC1XX_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
new file mode 100644
index 00000000000..33ad267e847
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * External Interrupt (GPH0 ~ GPH3) control register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5PC1XX_WKUP_INT_CON0_7 (S5PC1XX_EINT_BASE + 0x0)
+#define S5PC1XX_WKUP_INT_CON8_15 (S5PC1XX_EINT_BASE + 0x4)
+#define S5PC1XX_WKUP_INT_CON16_23 (S5PC1XX_EINT_BASE + 0x8)
+#define S5PC1XX_WKUP_INT_CON24_31 (S5PC1XX_EINT_BASE + 0xC)
+#define S5PC1XX_WKUP_INT_CON(x) (S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_FLTCON0_3 (S5PC1XX_EINT_BASE + 0x80)
+#define S5PC1XX_WKUP_INT_FLTCON4_7 (S5PC1XX_EINT_BASE + 0x84)
+#define S5PC1XX_WKUP_INT_FLTCON8_11 (S5PC1XX_EINT_BASE + 0x88)
+#define S5PC1XX_WKUP_INT_FLTCON12_15 (S5PC1XX_EINT_BASE + 0x8C)
+#define S5PC1XX_WKUP_INT_FLTCON16_19 (S5PC1XX_EINT_BASE + 0x90)
+#define S5PC1XX_WKUP_INT_FLTCON20_23 (S5PC1XX_EINT_BASE + 0x94)
+#define S5PC1XX_WKUP_INT_FLTCON24_27 (S5PC1XX_EINT_BASE + 0x98)
+#define S5PC1XX_WKUP_INT_FLTCON28_31 (S5PC1XX_EINT_BASE + 0x9C)
+#define S5PC1XX_WKUP_INT_FLTCON(x) (S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_MASK0_7 (S5PC1XX_EINT_BASE + 0x100)
+#define S5PC1XX_WKUP_INT_MASK8_15 (S5PC1XX_EINT_BASE + 0x104)
+#define S5PC1XX_WKUP_INT_MASK16_23 (S5PC1XX_EINT_BASE + 0x108)
+#define S5PC1XX_WKUP_INT_MASK24_31 (S5PC1XX_EINT_BASE + 0x10C)
+#define S5PC1XX_WKUP_INT_MASK(x) (S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_PEND0_7 (S5PC1XX_EINT_BASE + 0x140)
+#define S5PC1XX_WKUP_INT_PEND8_15 (S5PC1XX_EINT_BASE + 0x144)
+#define S5PC1XX_WKUP_INT_PEND16_23 (S5PC1XX_EINT_BASE + 0x148)
+#define S5PC1XX_WKUP_INT_PEND24_31 (S5PC1XX_EINT_BASE + 0x14C)
+#define S5PC1XX_WKUP_INT_PEND(x) (S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_LOWLEV (0x00)
+#define S5PC1XX_WKUP_INT_HILEV (0x01)
+#define S5PC1XX_WKUP_INT_FALLEDGE (0x02)
+#define S5PC1XX_WKUP_INT_RISEEDGE (0x03)
+#define S5PC1XX_WKUP_INT_BOTHEDGE (0x04)
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
index f07d8c3b25d..ef8736366f0 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -171,12 +171,21 @@
#define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30)
#define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31)
+/* External interrupt */
#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 1)
-#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
-#define IRQ_EINT(x) S3C_EINT(x)
+#define S3C_EINT(x) (S3C_IRQ_EINT_BASE + (x - 16))
+#define IRQ_EINT(x) (x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
+#define IRQ_EINT_BIT(x) (x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0))
-#define NR_IRQS (IRQ_EINT(31)+1)
+/* GPIO interrupt */
+#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1)
+#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x))
+
+/*
+ * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs
+ */
+#define NR_IRQS (S3C_IRQ_GPIO(320) + 1)
#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
index 75c8390cb82..c5cc86e92d6 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -13,68 +13,69 @@
#ifndef __PLAT_REGS_CLOCK_H
#define __PLAT_REGS_CLOCK_H __FILE__
-#define S5PC1XX_CLKREG(x) (S5PC1XX_VA_CLK + (x))
-
-#define S5PC1XX_APLL_LOCK S5PC1XX_CLKREG(0x00)
-#define S5PC1XX_MPLL_LOCK S5PC1XX_CLKREG(0x04)
-#define S5PC1XX_EPLL_LOCK S5PC1XX_CLKREG(0x08)
-#define S5PC100_HPLL_LOCK S5PC1XX_CLKREG(0x0C)
-
-#define S5PC1XX_APLL_CON S5PC1XX_CLKREG(0x100)
-#define S5PC1XX_MPLL_CON S5PC1XX_CLKREG(0x104)
-#define S5PC1XX_EPLL_CON S5PC1XX_CLKREG(0x108)
-#define S5PC100_HPLL_CON S5PC1XX_CLKREG(0x10C)
-
-#define S5PC1XX_CLK_SRC0 S5PC1XX_CLKREG(0x200)
-#define S5PC1XX_CLK_SRC1 S5PC1XX_CLKREG(0x204)
-#define S5PC1XX_CLK_SRC2 S5PC1XX_CLKREG(0x208)
-#define S5PC1XX_CLK_SRC3 S5PC1XX_CLKREG(0x20C)
-
-#define S5PC1XX_CLK_DIV0 S5PC1XX_CLKREG(0x300)
-#define S5PC1XX_CLK_DIV1 S5PC1XX_CLKREG(0x304)
-#define S5PC1XX_CLK_DIV2 S5PC1XX_CLKREG(0x308)
-#define S5PC1XX_CLK_DIV3 S5PC1XX_CLKREG(0x30C)
-#define S5PC1XX_CLK_DIV4 S5PC1XX_CLKREG(0x310)
-
-#define S5PC100_CLK_OUT S5PC1XX_CLKREG(0x400)
-
-#define S5PC100_CLKGATE_D00 S5PC1XX_CLKREG(0x500)
-#define S5PC100_CLKGATE_D01 S5PC1XX_CLKREG(0x504)
-#define S5PC100_CLKGATE_D02 S5PC1XX_CLKREG(0x508)
-
-#define S5PC100_CLKGATE_D10 S5PC1XX_CLKREG(0x520)
-#define S5PC100_CLKGATE_D11 S5PC1XX_CLKREG(0x524)
-#define S5PC100_CLKGATE_D12 S5PC1XX_CLKREG(0x528)
-#define S5PC100_CLKGATE_D13 S5PC1XX_CLKREG(0x52C)
-#define S5PC100_CLKGATE_D14 S5PC1XX_CLKREG(0x530)
-#define S5PC100_CLKGATE_D15 S5PC1XX_CLKREG(0x534)
-
-#define S5PC100_CLKGATE_D20 S5PC1XX_CLKREG(0x540)
-
-#define S5PC100_SCLKGATE0 S5PC1XX_CLKREG(0x560)
-#define S5PC100_SCLKGATE1 S5PC1XX_CLKREG(0x564)
-
-#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200)
-
-#define S5PC1XX_EPLL_EN (1<<31)
-#define S5PC1XX_EPLL_MASK 0xffffffff
-#define S5PC1XX_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
+#define S5PC100_CLKREG(x) (S5PC1XX_VA_CLK + (x))
+#define S5PC100_CLKREG_OTHER(x) (S5PC1XX_VA_CLK_OTHER + (x))
+
+/* s5pc100 register for clock */
+#define S5PC100_APLL_LOCK S5PC100_CLKREG(0x00)
+#define S5PC100_MPLL_LOCK S5PC100_CLKREG(0x04)
+#define S5PC100_EPLL_LOCK S5PC100_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK S5PC100_CLKREG(0x0C)
+
+#define S5PC100_APLL_CON S5PC100_CLKREG(0x100)
+#define S5PC100_MPLL_CON S5PC100_CLKREG(0x104)
+#define S5PC100_EPLL_CON S5PC100_CLKREG(0x108)
+#define S5PC100_HPLL_CON S5PC100_CLKREG(0x10C)
+
+#define S5PC100_CLKSRC0 S5PC100_CLKREG(0x200)
+#define S5PC100_CLKSRC1 S5PC100_CLKREG(0x204)
+#define S5PC100_CLKSRC2 S5PC100_CLKREG(0x208)
+#define S5PC100_CLKSRC3 S5PC100_CLKREG(0x20C)
+
+#define S5PC100_CLKDIV0 S5PC100_CLKREG(0x300)
+#define S5PC100_CLKDIV1 S5PC100_CLKREG(0x304)
+#define S5PC100_CLKDIV2 S5PC100_CLKREG(0x308)
+#define S5PC100_CLKDIV3 S5PC100_CLKREG(0x30C)
+#define S5PC100_CLKDIV4 S5PC100_CLKREG(0x310)
+
+#define S5PC100_CLK_OUT S5PC100_CLKREG(0x400)
+
+#define S5PC100_CLKGATE_D00 S5PC100_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01 S5PC100_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02 S5PC100_CLKREG(0x508)
+
+#define S5PC100_CLKGATE_D10 S5PC100_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11 S5PC100_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12 S5PC100_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13 S5PC100_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14 S5PC100_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15 S5PC100_CLKREG(0x534)
+
+#define S5PC100_CLKGATE_D20 S5PC100_CLKREG(0x540)
+
+#define S5PC100_SCLKGATE0 S5PC100_CLKREG(0x560)
+#define S5PC100_SCLKGATE1 S5PC100_CLKREG(0x564)
+
+/* EPLL_CON */
+#define S5PC100_EPLL_EN (1<<31)
+#define S5PC100_EPLL_MASK 0xffffffff
+#define S5PC100_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
/* CLKSRC0 */
-#define S5PC1XX_CLKSRC0_APLL_MASK (0x1<<0)
-#define S5PC1XX_CLKSRC0_APLL_SHIFT (0)
-#define S5PC1XX_CLKSRC0_MPLL_MASK (0x1<<4)
-#define S5PC1XX_CLKSRC0_MPLL_SHIFT (4)
-#define S5PC1XX_CLKSRC0_EPLL_MASK (0x1<<8)
-#define S5PC1XX_CLKSRC0_EPLL_SHIFT (8)
+#define S5PC100_CLKSRC0_APLL_MASK (0x1<<0)
+#define S5PC100_CLKSRC0_APLL_SHIFT (0)
+#define S5PC100_CLKSRC0_MPLL_MASK (0x1<<4)
+#define S5PC100_CLKSRC0_MPLL_SHIFT (4)
+#define S5PC100_CLKSRC0_EPLL_MASK (0x1<<8)
+#define S5PC100_CLKSRC0_EPLL_SHIFT (8)
#define S5PC100_CLKSRC0_HPLL_MASK (0x1<<12)
#define S5PC100_CLKSRC0_HPLL_SHIFT (12)
#define S5PC100_CLKSRC0_AMMUX_MASK (0x1<<16)
#define S5PC100_CLKSRC0_AMMUX_SHIFT (16)
#define S5PC100_CLKSRC0_HREF_MASK (0x1<<20)
#define S5PC100_CLKSRC0_HREF_SHIFT (20)
-#define S5PC1XX_CLKSRC0_ONENAND_MASK (0x1<<24)
-#define S5PC1XX_CLKSRC0_ONENAND_SHIFT (24)
+#define S5PC100_CLKSRC0_ONENAND_MASK (0x1<<24)
+#define S5PC100_CLKSRC0_ONENAND_SHIFT (24)
/* CLKSRC1 */
@@ -127,10 +128,9 @@
#define S5PC100_CLKSRC3_SPDIF_MASK (0x3<<24)
#define S5PC100_CLKSRC3_SPDIF_SHIFT (24)
-
/* CLKDIV0 */
-#define S5PC1XX_CLKDIV0_APLL_MASK (0x1<<0)
-#define S5PC1XX_CLKDIV0_APLL_SHIFT (0)
+#define S5PC100_CLKDIV0_APLL_MASK (0x1<<0)
+#define S5PC100_CLKDIV0_APLL_SHIFT (0)
#define S5PC100_CLKDIV0_ARM_MASK (0x7<<4)
#define S5PC100_CLKDIV0_ARM_SHIFT (4)
#define S5PC100_CLKDIV0_D0_MASK (0x7<<8)
@@ -141,8 +141,8 @@
#define S5PC100_CLKDIV0_SECSS_SHIFT (16)
/* CLKDIV1 */
-#define S5PC100_CLKDIV1_AM_MASK (0x7<<0)
-#define S5PC100_CLKDIV1_AM_SHIFT (0)
+#define S5PC100_CLKDIV1_APLL2_MASK (0x7<<0)
+#define S5PC100_CLKDIV1_APLL2_SHIFT (0)
#define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4)
#define S5PC100_CLKDIV1_MPLL_SHIFT (4)
#define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8)
@@ -202,7 +202,6 @@
#define S5PC100_CLKDIV4_AUDIO2_MASK (0xf<<20)
#define S5PC100_CLKDIV4_AUDIO2_SHIFT (20)
-
/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
#define S5PC100_CLKGATE_D00_INTC (1<<0)
#define S5PC100_CLKGATE_D00_TZIC (1<<1)
@@ -295,8 +294,8 @@
#define S5PC100_CLKGATE_D20_I2SD2 (1<<1)
/* Special Clock Gate 0 Registers */
-#define S5PC1XX_CLKGATE_SCLK0_HPM (1<<0)
-#define S5PC1XX_CLKGATE_SCLK0_PWI (1<<1)
+#define S5PC100_CLKGATE_SCLK0_HPM (1<<0)
+#define S5PC100_CLKGATE_SCLK0_PWI (1<<1)
#define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2)
#define S5PC100_CLKGATE_SCLK0_UART (1<<3)
#define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4)
@@ -329,89 +328,28 @@
#define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11)
#define S5PC100_CLKGATE_SCLK1_CAM (1<<12)
-/* register for power management */
-#define S5PC100_PWR_CFG S5PC1XX_CLKREG(0x8000)
-#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_CLKREG(0x8004)
-#define S5PC100_NORMAL_CFG S5PC1XX_CLKREG(0x8010)
-#define S5PC100_STOP_CFG S5PC1XX_CLKREG(0x8014)
-#define S5PC100_SLEEP_CFG S5PC1XX_CLKREG(0x8018)
-#define S5PC100_STOP_MEM_CFG S5PC1XX_CLKREG(0x801C)
-#define S5PC100_OSC_FREQ S5PC1XX_CLKREG(0x8100)
-#define S5PC100_OSC_STABLE S5PC1XX_CLKREG(0x8104)
-#define S5PC100_PWR_STABLE S5PC1XX_CLKREG(0x8108)
-#define S5PC100_MTC_STABLE S5PC1XX_CLKREG(0x8110)
-#define S5PC100_CLAMP_STABLE S5PC1XX_CLKREG(0x8114)
-#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200)
-#define S5PC100_RST_STAT S5PC1XX_CLKREG(0x8300)
-#define S5PC100_WAKEUP_STAT S5PC1XX_CLKREG(0x8304)
-#define S5PC100_BLK_PWR_STAT S5PC1XX_CLKREG(0x8308)
-#define S5PC100_INFORM0 S5PC1XX_CLKREG(0x8400)
-#define S5PC100_INFORM1 S5PC1XX_CLKREG(0x8404)
-#define S5PC100_INFORM2 S5PC1XX_CLKREG(0x8408)
-#define S5PC100_INFORM3 S5PC1XX_CLKREG(0x840C)
-#define S5PC100_INFORM4 S5PC1XX_CLKREG(0x8410)
-#define S5PC100_INFORM5 S5PC1XX_CLKREG(0x8414)
-#define S5PC100_INFORM6 S5PC1XX_CLKREG(0x8418)
-#define S5PC100_INFORM7 S5PC1XX_CLKREG(0x841C)
-#define S5PC100_DCGIDX_MAP0 S5PC1XX_CLKREG(0x8500)
-#define S5PC100_DCGIDX_MAP1 S5PC1XX_CLKREG(0x8504)
-#define S5PC100_DCGIDX_MAP2 S5PC1XX_CLKREG(0x8508)
-#define S5PC100_DCGPERF_MAP0 S5PC1XX_CLKREG(0x850C)
-#define S5PC100_DCGPERF_MAP1 S5PC1XX_CLKREG(0x8510)
-#define S5PC100_DVCIDX_MAP S5PC1XX_CLKREG(0x8514)
-#define S5PC100_FREQ_CPU S5PC1XX_CLKREG(0x8518)
-#define S5PC100_FREQ_DPM S5PC1XX_CLKREG(0x851C)
-#define S5PC100_DVSEMCLK_EN S5PC1XX_CLKREG(0x8520)
-#define S5PC100_APLL_CON_L8 S5PC1XX_CLKREG(0x8600)
-#define S5PC100_APLL_CON_L7 S5PC1XX_CLKREG(0x8604)
-#define S5PC100_APLL_CON_L6 S5PC1XX_CLKREG(0x8608)
-#define S5PC100_APLL_CON_L5 S5PC1XX_CLKREG(0x860C)
-#define S5PC100_APLL_CON_L4 S5PC1XX_CLKREG(0x8610)
-#define S5PC100_APLL_CON_L3 S5PC1XX_CLKREG(0x8614)
-#define S5PC100_APLL_CON_L2 S5PC1XX_CLKREG(0x8618)
-#define S5PC100_APLL_CON_L1 S5PC1XX_CLKREG(0x861C)
-#define S5PC100_IEM_CONTROL S5PC1XX_CLKREG(0x8620)
-#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_CLKREG(0x8700)
-#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_CLKREG(0x8704)
-#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_CLKREG(0x8708)
-#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_CLKREG(0x870C)
-#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_CLKREG(0x8710)
-#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_CLKREG(0x8714)
-#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_CLKREG(0x8718)
-#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_CLKREG(0x871C)
-#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_CLKREG(0x8724)
-
-#define S5PC100_SWRESET S5PC1XX_CLKREG(0x100000)
-#define S5PC100_OND_SWRESET S5PC1XX_CLKREG(0x100008)
-#define S5PC100_GEN_CTRL S5PC1XX_CLKREG(0x100100)
-#define S5PC100_GEN_STATUS S5PC1XX_CLKREG(0x100104)
-#define S5PC100_MEM_SYS_CFG S5PC1XX_CLKREG(0x100200)
-#define S5PC100_CAM_MUX_SEL S5PC1XX_CLKREG(0x100300)
-#define S5PC100_MIXER_OUT_SEL S5PC1XX_CLKREG(0x100304)
-#define S5PC100_LPMP_MODE_SEL S5PC1XX_CLKREG(0x100308)
-#define S5PC100_MIPI_PHY_CON0 S5PC1XX_CLKREG(0x100400)
-#define S5PC100_MIPI_PHY_CON1 S5PC1XX_CLKREG(0x100414)
-#define S5PC100_HDMI_PHY_CON0 S5PC1XX_CLKREG(0x100420)
-
-#define S5PC100_CFG_WFI_CLEAN (~(3<<5))
-#define S5PC100_CFG_WFI_IDLE (1<<5)
-#define S5PC100_CFG_WFI_STOP (2<<5)
-#define S5PC100_CFG_WFI_SLEEP (3<<5)
-
+#define S5PC100_SWRESET S5PC100_CLKREG_OTHER(0x000)
+#define S5PC100_OND_SWRESET S5PC100_CLKREG_OTHER(0x008)
+#define S5PC100_GEN_CTRL S5PC100_CLKREG_OTHER(0x100)
+#define S5PC100_GEN_STATUS S5PC100_CLKREG_OTHER(0x104)
+#define S5PC100_MEM_SYS_CFG S5PC100_CLKREG_OTHER(0x200)
+#define S5PC100_CAM_MUX_SEL S5PC100_CLKREG_OTHER(0x300)
+#define S5PC100_MIXER_OUT_SEL S5PC100_CLKREG_OTHER(0x304)
+#define S5PC100_LPMP_MODE_SEL S5PC100_CLKREG_OTHER(0x308)
+#define S5PC100_MIPI_PHY_CON0 S5PC100_CLKREG_OTHER(0x400)
+#define S5PC100_MIPI_PHY_CON1 S5PC100_CLKREG_OTHER(0x414)
+#define S5PC100_HDMI_PHY_CON0 S5PC100_CLKREG_OTHER(0x420)
+
+#define S5PC100_SWRESET_RESETVAL 0xc100
#define S5PC100_OTHER_SYS_INT 24
#define S5PC100_OTHER_STA_TYPE 23
#define STA_TYPE_EXPON 0
#define STA_TYPE_SFR 1
-#define S5PC100_PWR_STA_EXP_SCALE 0
-#define S5PC100_PWR_STA_CNT 4
-
-#define S5PC100_PWR_STABLE_COUNT 85500
-
#define S5PC100_SLEEP_CFG_OSC_EN 0
/* OTHERS Resgister */
-#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16)
+#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16)
#define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28)
/* MIPI D-PHY Control Register 0 */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
new file mode 100644
index 00000000000..43c7bc8bf78
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - GPIO register definitions
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_REGS_GPIO_H
+#define __ASM_PLAT_S5PC1XX_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* S5PC100 */
+#define S5PC100_GPIO_BASE S5PC1XX_VA_GPIO
+#define S5PC100_GPA0_BASE (S5PC100_GPIO_BASE + 0x0000)
+#define S5PC100_GPA1_BASE (S5PC100_GPIO_BASE + 0x0020)
+#define S5PC100_GPB_BASE (S5PC100_GPIO_BASE + 0x0040)
+#define S5PC100_GPC_BASE (S5PC100_GPIO_BASE + 0x0060)
+#define S5PC100_GPD_BASE (S5PC100_GPIO_BASE + 0x0080)
+#define S5PC100_GPE0_BASE (S5PC100_GPIO_BASE + 0x00A0)
+#define S5PC100_GPE1_BASE (S5PC100_GPIO_BASE + 0x00C0)
+#define S5PC100_GPF0_BASE (S5PC100_GPIO_BASE + 0x00E0)
+#define S5PC100_GPF1_BASE (S5PC100_GPIO_BASE + 0x0100)
+#define S5PC100_GPF2_BASE (S5PC100_GPIO_BASE + 0x0120)
+#define S5PC100_GPF3_BASE (S5PC100_GPIO_BASE + 0x0140)
+#define S5PC100_GPG0_BASE (S5PC100_GPIO_BASE + 0x0160)
+#define S5PC100_GPG1_BASE (S5PC100_GPIO_BASE + 0x0180)
+#define S5PC100_GPG2_BASE (S5PC100_GPIO_BASE + 0x01A0)
+#define S5PC100_GPG3_BASE (S5PC100_GPIO_BASE + 0x01C0)
+#define S5PC100_GPH0_BASE (S5PC100_GPIO_BASE + 0x0C00)
+#define S5PC100_GPH1_BASE (S5PC100_GPIO_BASE + 0x0C20)
+#define S5PC100_GPH2_BASE (S5PC100_GPIO_BASE + 0x0C40)
+#define S5PC100_GPH3_BASE (S5PC100_GPIO_BASE + 0x0C60)
+#define S5PC100_GPI_BASE (S5PC100_GPIO_BASE + 0x01E0)
+#define S5PC100_GPJ0_BASE (S5PC100_GPIO_BASE + 0x0200)
+#define S5PC100_GPJ1_BASE (S5PC100_GPIO_BASE + 0x0220)
+#define S5PC100_GPJ2_BASE (S5PC100_GPIO_BASE + 0x0240)
+#define S5PC100_GPJ3_BASE (S5PC100_GPIO_BASE + 0x0260)
+#define S5PC100_GPJ4_BASE (S5PC100_GPIO_BASE + 0x0280)
+#define S5PC100_GPK0_BASE (S5PC100_GPIO_BASE + 0x02A0)
+#define S5PC100_GPK1_BASE (S5PC100_GPIO_BASE + 0x02C0)
+#define S5PC100_GPK2_BASE (S5PC100_GPIO_BASE + 0x02E0)
+#define S5PC100_GPK3_BASE (S5PC100_GPIO_BASE + 0x0300)
+#define S5PC100_GPL0_BASE (S5PC100_GPIO_BASE + 0x0320)
+#define S5PC100_GPL1_BASE (S5PC100_GPIO_BASE + 0x0340)
+#define S5PC100_GPL2_BASE (S5PC100_GPIO_BASE + 0x0360)
+#define S5PC100_GPL3_BASE (S5PC100_GPIO_BASE + 0x0380)
+#define S5PC100_GPL4_BASE (S5PC100_GPIO_BASE + 0x03A0)
+#define S5PC100_EINT_BASE (S5PC100_GPIO_BASE + 0x0E00)
+
+#define S5PC100_UHOST (S5PC100_GPIO_BASE + 0x0B68)
+#define S5PC100_PDNEN (S5PC100_GPIO_BASE + 0x0F80)
+
+/* PDNEN */
+#define S5PC100_PDNEN_CFG_PDNEN (1 << 1)
+#define S5PC100_PDNEN_CFG_AUTO (0 << 1)
+#define S5PC100_PDNEN_POWERDOWN (1 << 0)
+#define S5PC100_PDNEN_NORMAL (0 << 0)
+
+/* Common part */
+/* External interrupt base is same at both s5pc100 and s5pc110 */
+#define S5PC1XX_EINT_BASE (S5PC100_EINT_BASE)
+
+#define S5PC100_GPx_INPUT(__gpio) (0x0 << ((__gpio) * 4))
+#define S5PC100_GPx_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
+#define S5PC100_GPx_CONMASK(__gpio) (0xf << ((__gpio) * 4))
+
+#endif /* __ASM_PLAT_S5PC1XX_REGS_GPIO_H */
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
new file mode 100644
index 00000000000..02ffa491b53
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
@@ -0,0 +1,84 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Jongse Won <jongse.won@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_REGS_PWR
+#define __ASM_ARM_REGS_PWR __FILE__
+
+#define S5PC1XX_PWRREG(x) (S5PC1XX_VA_PWR + (x))
+
+/* s5pc100 (0xE0108000) register for power management */
+#define S5PC100_PWR_CFG S5PC1XX_PWRREG(0x0)
+#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_PWRREG(0x4)
+#define S5PC100_NORMAL_CFG S5PC1XX_PWRREG(0x10)
+#define S5PC100_STOP_CFG S5PC1XX_PWRREG(0x14)
+#define S5PC100_SLEEP_CFG S5PC1XX_PWRREG(0x18)
+#define S5PC100_STOP_MEM_CFG S5PC1XX_PWRREG(0x1C)
+#define S5PC100_OSC_FREQ S5PC1XX_PWRREG(0x100)
+#define S5PC100_OSC_STABLE S5PC1XX_PWRREG(0x104)
+#define S5PC100_PWR_STABLE S5PC1XX_PWRREG(0x108)
+#define S5PC100_MTC_STABLE S5PC1XX_PWRREG(0x110)
+#define S5PC100_CLAMP_STABLE S5PC1XX_PWRREG(0x114)
+#define S5PC100_OTHERS S5PC1XX_PWRREG(0x200)
+#define S5PC100_RST_STAT S5PC1XX_PWRREG(0x300)
+#define S5PC100_WAKEUP_STAT S5PC1XX_PWRREG(0x304)
+#define S5PC100_BLK_PWR_STAT S5PC1XX_PWRREG(0x308)
+#define S5PC100_INFORM0 S5PC1XX_PWRREG(0x400)
+#define S5PC100_INFORM1 S5PC1XX_PWRREG(0x404)
+#define S5PC100_INFORM2 S5PC1XX_PWRREG(0x408)
+#define S5PC100_INFORM3 S5PC1XX_PWRREG(0x40C)
+#define S5PC100_INFORM4 S5PC1XX_PWRREG(0x410)
+#define S5PC100_INFORM5 S5PC1XX_PWRREG(0x414)
+#define S5PC100_INFORM6 S5PC1XX_PWRREG(0x418)
+#define S5PC100_INFORM7 S5PC1XX_PWRREG(0x41C)
+#define S5PC100_DCGIDX_MAP0 S5PC1XX_PWRREG(0x500)
+#define S5PC100_DCGIDX_MAP1 S5PC1XX_PWRREG(0x504)
+#define S5PC100_DCGIDX_MAP2 S5PC1XX_PWRREG(0x508)
+#define S5PC100_DCGPERF_MAP0 S5PC1XX_PWRREG(0x50C)
+#define S5PC100_DCGPERF_MAP1 S5PC1XX_PWRREG(0x510)
+#define S5PC100_DVCIDX_MAP S5PC1XX_PWRREG(0x514)
+#define S5PC100_FREQ_CPU S5PC1XX_PWRREG(0x518)
+#define S5PC100_FREQ_DPM S5PC1XX_PWRREG(0x51C)
+#define S5PC100_DVSEMCLK_EN S5PC1XX_PWRREG(0x520)
+#define S5PC100_APLL_CON_L8 S5PC1XX_PWRREG(0x600)
+#define S5PC100_APLL_CON_L7 S5PC1XX_PWRREG(0x604)
+#define S5PC100_APLL_CON_L6 S5PC1XX_PWRREG(0x608)
+#define S5PC100_APLL_CON_L5 S5PC1XX_PWRREG(0x60C)
+#define S5PC100_APLL_CON_L4 S5PC1XX_PWRREG(0x610)
+#define S5PC100_APLL_CON_L3 S5PC1XX_PWRREG(0x614)
+#define S5PC100_APLL_CON_L2 S5PC1XX_PWRREG(0x618)
+#define S5PC100_APLL_CON_L1 S5PC1XX_PWRREG(0x61C)
+#define S5PC100_IEM_CONTROL S5PC1XX_PWRREG(0x620)
+#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_PWRREG(0x700)
+#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_PWRREG(0x704)
+#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_PWRREG(0x708)
+#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_PWRREG(0x70C)
+#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_PWRREG(0x710)
+#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_PWRREG(0x714)
+#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_PWRREG(0x718)
+#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_PWRREG(0x71C)
+#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_PWRREG(0x724)
+
+/* PWR_CFG */
+#define S5PC100_PWRCFG_CFG_DEEP_IDLE (1 << 31)
+#define S5PC100_PWRCFG_CFG_WFI_MASK (3 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_IDLE (0 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE (1 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_STOP (2 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_SLEEP (3 << 5)
+
+/* SLEEP_CFG */
+#define S5PC100_SLEEP_OSC_EN_SLEEP (1 << 0)
+
+/* OTHERS */
+#define S5PC100_PMU_INT_DISABLE (1 << 24)
+
+#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
index 45e27513166..2531f34a56f 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -35,10 +35,9 @@ extern struct clk clk_hpll;
extern struct clk clk_hd0;
extern struct clk clk_pd0;
extern struct clk clk_54m;
-extern struct clk clk_dout_mpll2;
extern void s5pc1xx_register_clocks(void);
-extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
-extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable);
/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c
new file mode 100644
index 00000000000..373122f57d5
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq-eint.c
@@ -0,0 +1,281 @@
+/*
+ * linux/arch/arm/plat-s5pc1xx/irq-eint.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ * Kyungin Park <kyungmin.park@samsung.com>
+ *
+ * Based on plat-s3c64xx/irq-eint.c
+ *
+ * S5PC1XX - Interrupt handling for IRQ_EINT(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/pm.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-ext.h>
+#include <plat/pm.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-irqtype.h>
+
+/*
+ * bank is a group of external interrupt
+ * bank0 means EINT0 ... EINT7
+ * bank1 means EINT8 ... EINT15
+ * bank2 means EINT16 ... EINT23
+ * bank3 means EINT24 ... EINT31
+ */
+
+static inline int s3c_get_eint(unsigned int irq)
+{
+ int real;
+
+ if (irq < IRQ_EINT16_31)
+ real = (irq - IRQ_EINT0);
+ else
+ real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0;
+
+ return real;
+}
+
+static inline int s3c_get_bank(unsigned int irq)
+{
+ return s3c_get_eint(irq) >> 3;
+}
+
+static inline int s3c_eint_to_bit(unsigned int irq)
+{
+ int real, bit;
+
+ real = s3c_get_eint(irq);
+ bit = 1 << (real & (8 - 1));
+
+ return bit;
+}
+
+static inline void s3c_irq_eint_mask(unsigned int irq)
+{
+ u32 mask;
+ u32 bank = s3c_get_bank(irq);
+
+ mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
+ mask |= s3c_eint_to_bit(irq);
+ __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
+}
+
+static void s3c_irq_eint_unmask(unsigned int irq)
+{
+ u32 mask;
+ u32 bank = s3c_get_bank(irq);
+
+ mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
+ mask &= ~(s3c_eint_to_bit(irq));
+ __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
+}
+
+static inline void s3c_irq_eint_ack(unsigned int irq)
+{
+ u32 bank = s3c_get_bank(irq);
+
+ __raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank));
+}
+
+static void s3c_irq_eint_maskack(unsigned int irq)
+{
+ /* compiler should in-line these */
+ s3c_irq_eint_mask(irq);
+ s3c_irq_eint_ack(irq);
+}
+
+static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+ u32 bank = s3c_get_bank(irq);
+ int real = s3c_get_eint(irq);
+ int gpio, shift, sfn;
+ u32 ctrl, con = 0;
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ printk(KERN_WARNING "No edge setting!\n");
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ con = S5PC1XX_WKUP_INT_RISEEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ con = S5PC1XX_WKUP_INT_FALLEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ con = S5PC1XX_WKUP_INT_BOTHEDGE;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ con = S5PC1XX_WKUP_INT_LOWLEV;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ con = S5PC1XX_WKUP_INT_HILEV;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ gpio = real & (8 - 1);
+ shift = gpio << 2;
+
+ ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank));
+ ctrl &= ~(0x7 << shift);
+ ctrl |= con << shift;
+ __raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank));
+
+ switch (real) {
+ case 0 ... 7:
+ gpio = S5PC100_GPH0(gpio);
+ break;
+ case 8 ... 15:
+ gpio = S5PC100_GPH1(gpio);
+ break;
+ case 16 ... 23:
+ gpio = S5PC100_GPH2(gpio);
+ break;
+ case 24 ... 31:
+ gpio = S5PC100_GPH3(gpio);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ sfn = S3C_GPIO_SFN(0x2);
+ s3c_gpio_cfgpin(gpio, sfn);
+
+ return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+ .name = "EINT",
+ .mask = s3c_irq_eint_mask,
+ .unmask = s3c_irq_eint_unmask,
+ .mask_ack = s3c_irq_eint_maskack,
+ .ack = s3c_irq_eint_ack,
+ .set_type = s3c_irq_eint_set_type,
+ .set_wake = s3c_irqext_wake,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from external interrupts,
+ * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+ u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3)));
+ u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3)));
+ unsigned int irq;
+
+ status &= ~mask;
+ status &= (1 << (end - start + 1)) - 1;
+
+ for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+ if (status & 1)
+ generic_handle_irq(irq);
+
+ status >>= 1;
+ }
+}
+
+static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_eint(16, 23);
+ s3c_irq_demux_eint(24, 31);
+}
+
+/*
+ * Handle EINT0 ... EINT15 at VIC directly
+ */
+static void s3c_irq_vic_eint_mask(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ unsigned int real;
+
+ s3c_irq_eint_mask(irq);
+ real = s3c_get_eint(irq);
+ writel(1 << real, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void s3c_irq_vic_eint_unmask(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ unsigned int real;
+
+ s3c_irq_eint_unmask(irq);
+ real = s3c_get_eint(irq);
+ writel(1 << real, base + VIC_INT_ENABLE);
+}
+
+static inline void s3c_irq_vic_eint_ack(unsigned int irq)
+{
+ u32 bit;
+ u32 bank = s3c_get_bank(irq);
+
+ bit = s3c_eint_to_bit(irq);
+ __raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank));
+}
+
+static void s3c_irq_vic_eint_maskack(unsigned int irq)
+{
+ /* compiler should in-line these */
+ s3c_irq_vic_eint_mask(irq);
+ s3c_irq_vic_eint_ack(irq);
+}
+
+static struct irq_chip s3c_irq_vic_eint = {
+ .name = "EINT",
+ .mask = s3c_irq_vic_eint_mask,
+ .unmask = s3c_irq_vic_eint_unmask,
+ .mask_ack = s3c_irq_vic_eint_maskack,
+ .ack = s3c_irq_vic_eint_ack,
+ .set_type = s3c_irq_eint_set_type,
+ .set_wake = s3c_irqext_wake,
+};
+
+static int __init s5pc1xx_init_irq_eint(void)
+{
+ int irq;
+
+ for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) {
+ set_irq_chip(irq, &s3c_irq_vic_eint);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
+ set_irq_chip(irq, &s3c_irq_eint);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31);
+
+ return 0;
+}
+
+arch_initcall(s5pc1xx_init_irq_eint);
diff --git a/arch/arm/plat-s5pc1xx/irq-gpio.c b/arch/arm/plat-s5pc1xx/irq-gpio.c
new file mode 100644
index 00000000000..fecca7a679b
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq-gpio.c
@@ -0,0 +1,266 @@
+/*
+ * arch/arm/plat-s5pc1xx/irq-gpio.c
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ *
+ * S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <plat/gpio-cfg.h>
+
+#define S5PC1XX_GPIOREG(x) (S5PC1XX_VA_GPIO + (x))
+
+#define CON_OFFSET 0x700
+#define MASK_OFFSET 0x900
+#define PEND_OFFSET 0xA00
+#define CON_OFFSET_2 0xE00
+#define MASK_OFFSET_2 0xF00
+#define PEND_OFFSET_2 0xF40
+
+#define GPIOINT_LEVEL_LOW 0x0
+#define GPIOINT_LEVEL_HIGH 0x1
+#define GPIOINT_EDGE_FALLING 0x2
+#define GPIOINT_EDGE_RISING 0x3
+#define GPIOINT_EDGE_BOTH 0x4
+
+static int group_to_con_offset(int group)
+{
+ return group << 2;
+}
+
+static int group_to_mask_offset(int group)
+{
+ return group << 2;
+}
+
+static int group_to_pend_offset(int group)
+{
+ return group << 2;
+}
+
+static int s5pc1xx_get_start(unsigned int group)
+{
+ switch (group) {
+ case 0: return S5PC100_GPIO_A0_START;
+ case 1: return S5PC100_GPIO_A1_START;
+ case 2: return S5PC100_GPIO_B_START;
+ case 3: return S5PC100_GPIO_C_START;
+ case 4: return S5PC100_GPIO_D_START;
+ case 5: return S5PC100_GPIO_E0_START;
+ case 6: return S5PC100_GPIO_E1_START;
+ case 7: return S5PC100_GPIO_F0_START;
+ case 8: return S5PC100_GPIO_F1_START;
+ case 9: return S5PC100_GPIO_F2_START;
+ case 10: return S5PC100_GPIO_F3_START;
+ case 11: return S5PC100_GPIO_G0_START;
+ case 12: return S5PC100_GPIO_G1_START;
+ case 13: return S5PC100_GPIO_G2_START;
+ case 14: return S5PC100_GPIO_G3_START;
+ case 15: return S5PC100_GPIO_I_START;
+ case 16: return S5PC100_GPIO_J0_START;
+ case 17: return S5PC100_GPIO_J1_START;
+ case 18: return S5PC100_GPIO_J2_START;
+ case 19: return S5PC100_GPIO_J3_START;
+ case 20: return S5PC100_GPIO_J4_START;
+ default:
+ BUG();
+ }
+
+ return -EINVAL;
+}
+
+static int s5pc1xx_get_group(unsigned int irq)
+{
+ irq -= S3C_IRQ_GPIO(0);
+
+ switch (irq) {
+ case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1:
+ return 0;
+ case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1:
+ return 1;
+ case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1:
+ return 2;
+ case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1:
+ return 3;
+ case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1:
+ return 4;
+ case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1:
+ return 5;
+ case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1:
+ return 6;
+ case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1:
+ return 7;
+ case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1:
+ return 8;
+ case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1:
+ return 9;
+ case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1:
+ return 10;
+ case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1:
+ return 11;
+ case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1:
+ return 12;
+ case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1:
+ return 13;
+ case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1:
+ return 14;
+ case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1:
+ return 15;
+ case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1:
+ return 16;
+ case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1:
+ return 17;
+ case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1:
+ return 18;
+ case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1:
+ return 19;
+ case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1:
+ return 20;
+ default:
+ BUG();
+ }
+
+ return -EINVAL;
+}
+
+static int s5pc1xx_get_offset(unsigned int irq)
+{
+ struct gpio_chip *chip = get_irq_data(irq);
+ return irq - S3C_IRQ_GPIO(chip->base);
+}
+
+static void s5pc1xx_gpioint_ack(unsigned int irq)
+{
+ int group, offset, pend_offset;
+ unsigned int value;
+
+ group = s5pc1xx_get_group(irq);
+ offset = s5pc1xx_get_offset(irq);
+ pend_offset = group_to_pend_offset(group);
+
+ value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+ value |= 1 << offset;
+ __raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+}
+
+static void s5pc1xx_gpioint_mask(unsigned int irq)
+{
+ int group, offset, mask_offset;
+ unsigned int value;
+
+ group = s5pc1xx_get_group(irq);
+ offset = s5pc1xx_get_offset(irq);
+ mask_offset = group_to_mask_offset(group);
+
+ value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+ value |= 1 << offset;
+ __raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc1xx_gpioint_unmask(unsigned int irq)
+{
+ int group, offset, mask_offset;
+ unsigned int value;
+
+ group = s5pc1xx_get_group(irq);
+ offset = s5pc1xx_get_offset(irq);
+ mask_offset = group_to_mask_offset(group);
+
+ value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+ value &= ~(1 << offset);
+ __raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc1xx_gpioint_mask_ack(unsigned int irq)
+{
+ s5pc1xx_gpioint_mask(irq);
+ s5pc1xx_gpioint_ack(irq);
+}
+
+static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type)
+{
+ int group, offset, con_offset;
+ unsigned int value;
+
+ group = s5pc1xx_get_group(irq);
+ offset = s5pc1xx_get_offset(irq);
+ con_offset = group_to_con_offset(group);
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ printk(KERN_WARNING "No irq type\n");
+ return -EINVAL;
+ case IRQ_TYPE_EDGE_RISING:
+ type = GPIOINT_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ type = GPIOINT_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ type = GPIOINT_EDGE_BOTH;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ type = GPIOINT_LEVEL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ type = GPIOINT_LEVEL_LOW;
+ break;
+ default:
+ BUG();
+ }
+
+
+ value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+ value &= ~(0xf << (offset * 0x4));
+ value |= (type << (offset * 0x4));
+ __raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+
+ return 0;
+}
+
+struct irq_chip s5pc1xx_gpioint = {
+ .name = "GPIO",
+ .ack = s5pc1xx_gpioint_ack,
+ .mask = s5pc1xx_gpioint_mask,
+ .mask_ack = s5pc1xx_gpioint_mask_ack,
+ .unmask = s5pc1xx_gpioint_unmask,
+ .set_type = s5pc1xx_gpioint_set_type,
+};
+
+void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int group, offset, pend_offset, mask_offset;
+ int real_irq, group_end;
+ unsigned int pend, mask;
+
+ group_end = 21;
+
+ for (group = 0; group < group_end; group++) {
+ pend_offset = group_to_pend_offset(group);
+ pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+ if (!pend)
+ continue;
+
+ mask_offset = group_to_mask_offset(group);
+ mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+ pend &= ~mask;
+
+ for (offset = 0; offset < 8; offset++) {
+ if (pend & (1 << offset)) {
+ real_irq = s5pc1xx_get_start(group) + offset;
+ generic_handle_irq(S3C_IRQ_GPIO(real_irq));
+ }
+ }
+ }
+}
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
index 80d6dd942cb..e44fd04ef33 100644
--- a/arch/arm/plat-s5pc1xx/irq.c
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -79,7 +79,7 @@ static void s3c_irq_timer_ack(unsigned int irq)
{
u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
- reg &= 0x1f;
+ reg &= 0x1f; /* mask out pending interrupts */
reg |= (1 << 5) << (irq - IRQ_TIMER0);
__raw_writel(reg, S3C64XX_TINT_CSTAT);
}
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
index 6b24035172f..b436d44510c 100644
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -49,6 +49,7 @@ static struct clk clk_ext_xtal_mux = {
#define clk_fin_hpll clk_ext_xtal_mux
#define clk_fout_mpll clk_mpll
+#define clk_vclk_54m clk_54m
struct clk_sources {
unsigned int nr_sources;
@@ -67,746 +68,327 @@ struct clksrc_clk {
void __iomem *reg_source;
};
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
- clk->rate = rate;
- return 1;
-}
-
-struct clk clk_27m = {
- .name = "clk_27m",
+/* APLL */
+static struct clk clk_fout_apll = {
+ .name = "fout_apll",
.id = -1,
.rate = 27000000,
};
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
- unsigned long flags;
- u32 val;
+static struct clk *clk_src_apll_list[] = {
+ [0] = &clk_fin_apll,
+ [1] = &clk_fout_apll,
+};
+
+static struct clk_sources clk_src_apll = {
+ .sources = clk_src_apll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_apll_list),
+};
- /* can't rely on clock lock, this register has other usages */
- local_irq_save(flags);
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .shift = S5PC100_CLKSRC0_APLL_SHIFT,
+ .mask = S5PC100_CLKSRC0_APLL_MASK,
+ .sources = &clk_src_apll,
+ .reg_source = S5PC100_CLKSRC0,
+};
- val = __raw_readl(S5PC1XX_CLK_SRC1);
- if (enable)
- val |= S5PC100_CLKSRC1_CLK48M_MASK;
- else
- val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
- __raw_writel(val, S5PC1XX_CLK_SRC1);
- local_irq_restore(flags);
+ ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK;
+ ratio >>= S5PC100_CLKDIV0_APLL_SHIFT;
- return 0;
+ return rate / (ratio + 1);
}
-struct clk clk_48m = {
- .name = "clk_48m",
+static struct clk clk_dout_apll = {
+ .name = "dout_apll",
.id = -1,
- .rate = 48000000,
- .enable = clk_48m_ctrl,
+ .parent = &clk_mout_apll.clk,
+ .get_rate = s5pc100_clk_dout_apll_get_rate,
};
-struct clk clk_54m = {
- .name = "clk_54m",
- .id = -1,
- .rate = 54000000,
-};
-
-struct clk clk_hpll = {
- .name = "hpll",
- .id = -1,
-};
+static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
-struct clk clk_hd0 = {
- .name = "hclkd0",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .set_rate = clk_default_setrate,
-};
+ ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK;
+ ratio >>= S5PC100_CLKDIV0_ARM_SHIFT;
-struct clk clk_pd0 = {
- .name = "pclkd0",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .set_rate = clk_default_setrate,
-};
+ return rate / (ratio + 1);
+}
-static int s5pc1xx_clk_gate(void __iomem *reg,
- struct clk *clk,
- int enable)
+static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk,
+ unsigned long rate)
{
- unsigned int ctrlbit = clk->ctrlbit;
- u32 con;
+ unsigned long parent = clk_get_rate(clk->parent);
+ u32 div;
- con = __raw_readl(reg);
+ if (parent < rate)
+ return rate;
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
+ div = (parent / rate) - 1;
+ if (div > S5PC100_CLKDIV0_ARM_MASK)
+ div = S5PC100_CLKDIV0_ARM_MASK;
- __raw_writel(con, reg);
- return 0;
+ return parent / (div + 1);
}
-static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
+static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate)
{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
-}
+ unsigned long parent = clk_get_rate(clk->parent);
+ u32 div;
+ u32 val;
-static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
-}
+ if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1))
+ return -EINVAL;
-static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
-}
+ rate = clk_round_rate(clk, rate);
+ div = clk_get_rate(clk->parent) / rate;
-static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
-}
+ val = __raw_readl(S5PC100_CLKDIV0);
+ val &= S5PC100_CLKDIV0_ARM_MASK;
+ val |= (div - 1);
+ __raw_writel(val, S5PC100_CLKDIV0);
-static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+ return 0;
}
-static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
-}
+static struct clk clk_arm = {
+ .name = "armclk",
+ .id = -1,
+ .parent = &clk_dout_apll,
+ .get_rate = s5pc100_clk_arm_get_rate,
+ .set_rate = s5pc100_clk_arm_set_rate,
+ .round_rate = s5pc100_clk_arm_round_rate,
+};
-static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
+static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
-}
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
-static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
-}
+ ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK;
+ ratio >>= S5PC100_CLKDIV0_D0_SHIFT;
-static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+ return rate / (ratio + 1);
}
-static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
-}
+static struct clk clk_dout_d0_bus = {
+ .name = "dout_d0_bus",
+ .id = -1,
+ .parent = &clk_arm,
+ .get_rate = s5pc100_clk_dout_d0_bus_get_rate,
+};
-int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
+static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
{
- return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
+
+ ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK;
+ ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT;
+
+ return rate / (ratio + 1);
}
-int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
+static struct clk clk_dout_pclkd0 = {
+ .name = "dout_pclkd0",
+ .id = -1,
+ .parent = &clk_dout_d0_bus,
+ .get_rate = s5pc100_clk_dout_pclkd0_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
{
- return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
+
+ ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK;
+ ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT;
+
+ return rate / (ratio + 1);
}
-static struct clk init_clocks_disable[] = {
- {
- .name = "dsi",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_DSI,
- }, {
- .name = "csi",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_CSI,
- }, {
- .name = "ccan0",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_CCAN0,
- }, {
- .name = "ccan1",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_CCAN1,
- }, {
- .name = "keypad",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
- }, {
- .name = "hclkd2",
- .id = -1,
- .parent = NULL,
- .enable = s5pc1xx_clk_d20_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2,
- }, {
- .name = "iis-d2",
- .id = -1,
- .parent = NULL,
- .enable = s5pc1xx_clk_d20_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D20_I2SD2,
- }, {
- .name = "otg",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_USBOTG,
- },
+static struct clk clk_dout_apll2 = {
+ .name = "dout_apll2",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+ .get_rate = s5pc100_clk_dout_apll2_get_rate,
};
-static struct clk init_clocks[] = {
- /* System1 (D0_0) devices */
- {
- .name = "intc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_INTC,
- }, {
- .name = "tzic",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_TZIC,
- }, {
- .name = "cf-ata",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_CFCON,
- }, {
- .name = "mdma",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_MDMA,
- }, {
- .name = "g2d",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_G2D,
- }, {
- .name = "secss",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_SECSS,
- }, {
- .name = "cssys",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_CSSYS,
- },
+/* MPLL */
+static struct clk *clk_src_mpll_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &clk_fout_mpll,
+};
- /* Memory (D0_1) devices */
- {
- .name = "dmc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_DMC,
- }, {
- .name = "sromc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_SROMC,
- }, {
- .name = "onenand",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_ONENAND,
- }, {
- .name = "nand",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_NFCON,
- }, {
- .name = "intmem",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_INTMEM,
- }, {
- .name = "ebi",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_EBI,
- },
+static struct clk_sources clk_src_mpll = {
+ .sources = clk_src_mpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
+};
- /* System2 (D0_2) devices */
- {
- .name = "seckey",
- .id = -1,
- .parent = &clk_pd0,
- .enable = s5pc1xx_clk_d02_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D02_SECKEY,
- }, {
- .name = "sdm",
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
.id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d02_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D02_SDM,
},
+ .shift = S5PC100_CLKSRC0_MPLL_SHIFT,
+ .mask = S5PC100_CLKSRC0_MPLL_MASK,
+ .sources = &clk_src_mpll,
+ .reg_source = S5PC100_CLKSRC0,
+};
- /* File (D1_0) devices */
- {
- .name = "pdma0",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_PDMA0,
- }, {
- .name = "pdma1",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_PDMA1,
- }, {
- .name = "usb-host",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_USBHOST,
- }, {
- .name = "modem",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF,
- }, {
- .name = "hsmmc",
- .id = 0,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0,
- }, {
- .name = "hsmmc",
- .id = 1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1,
- }, {
- .name = "hsmmc",
- .id = 2,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2,
- },
+static struct clk *clkset_am_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_dout_apll2,
+};
- /* Multimedia1 (D1_1) devices */
- {
- .name = "lcd",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_LCD,
- }, {
- .name = "rotator",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR,
- }, {
- .name = "fimc",
- .id = 0,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC0,
- }, {
- .name = "fimc",
- .id = 1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC1,
- }, {
- .name = "fimc",
- .id = 2,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC2,
- }, {
- .name = "jpeg",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_JPEG,
- }, {
- .name = "g3d",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_G3D,
- },
+static struct clk_sources clk_src_am = {
+ .sources = clkset_am_list,
+ .nr_sources = ARRAY_SIZE(clkset_am_list),
+};
- /* Multimedia2 (D1_2) devices */
- {
- .name = "tv",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_TV,
- }, {
- .name = "vp",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_VP,
- }, {
- .name = "mixer",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_MIXER,
- }, {
- .name = "hdmi",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_HDMI,
- }, {
- .name = "mfc",
+static struct clksrc_clk clk_mout_am = {
+ .clk = {
+ .name = "mout_am",
.id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_MFC,
},
+ .shift = S5PC100_CLKSRC0_AMMUX_SHIFT,
+ .mask = S5PC100_CLKSRC0_AMMUX_MASK,
+ .sources = &clk_src_am,
+ .reg_source = S5PC100_CLKSRC0,
+};
- /* System (D1_3) devices */
- {
- .name = "chipid",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_CHIPID,
- }, {
- .name = "gpio",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_GPIO,
- }, {
- .name = "apc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_APC,
- }, {
- .name = "iec",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_IEC,
- }, {
- .name = "timers",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_PWM,
- }, {
- .name = "systimer",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER,
- }, {
- .name = "watchdog",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_WDT,
- }, {
- .name = "rtc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_RTC,
- },
+static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
- /* Connectivity (D1_4) devices */
- {
- .name = "uart",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART0,
- }, {
- .name = "uart",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART1,
- }, {
- .name = "uart",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART2,
- }, {
- .name = "uart",
- .id = 3,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART3,
- }, {
- .name = "i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_IIC,
- }, {
- .name = "hdmi-i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC,
- }, {
- .name = "spi",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI0,
- }, {
- .name = "spi",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI1,
- }, {
- .name = "spi",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI2,
- }, {
- .name = "irda",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_IRDA,
- }, {
- .name = "hsitx",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HSITX,
- }, {
- .name = "hsirx",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HSIRX,
- },
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
- /* Audio (D1_5) devices */
- {
- .name = "iis",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS0,
- }, {
- .name = "iis",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS1,
- }, {
- .name = "iis",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS2,
- }, {
- .name = "ac97",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_AC97,
- }, {
- .name = "pcm",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_PCM0,
- }, {
- .name = "pcm",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_PCM1,
- }, {
- .name = "spdif",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_SPDIF,
- }, {
- .name = "adc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_TSADC,
- }, {
- .name = "keyif",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
- }, {
- .name = "cg",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_CG,
- },
+ ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK;
+ ratio >>= S5PC100_CLKDIV1_D1_SHIFT;
- /* Audio (D2_0) devices: all disabled */
+ return rate / (ratio + 1);
+}
- /* Special Clocks 1 */
- {
- .name = "sclk_hpm",
- .id = -1,
- .parent = NULL,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC1XX_CLKGATE_SCLK0_HPM,
- }, {
- .name = "sclk_onenand",
- .id = -1,
- .parent = NULL,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND,
- }, {
- .name = "sclk_spi_48",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48,
- }, {
- .name = "sclk_spi_48",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48,
- }, {
- .name = "sclk_spi_48",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48,
- }, {
- .name = "sclk_mmc_48",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48,
- }, {
- .name = "sclk_mmc_48",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48,
- }, {
- .name = "sclk_mmc_48",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48,
- },
+static struct clk clk_dout_d1_bus = {
+ .name = "dout_d1_bus",
+ .id = -1,
+ .parent = &clk_mout_am.clk,
+ .get_rate = s5pc100_clk_dout_d1_bus_get_rate,
+};
- /* Special Clocks 2 */
- {
- .name = "sclk_tv_54",
- .id = -1,
- .parent = &clk_54m,
- .enable = s5pc1xx_sclk1_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_TV54,
- }, {
- .name = "sclk_vdac_54",
- .id = -1,
- .parent = &clk_54m,
- .enable = s5pc1xx_sclk1_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_VDAC54,
- }, {
- .name = "sclk_spdif",
+static struct clk *clkset_onenand_list[] = {
+ [0] = &clk_dout_d0_bus,
+ [1] = &clk_dout_d1_bus,
+};
+
+static struct clk_sources clk_src_onenand = {
+ .sources = clkset_onenand_list,
+ .nr_sources = ARRAY_SIZE(clkset_onenand_list),
+};
+
+static struct clksrc_clk clk_mout_onenand = {
+ .clk = {
+ .name = "mout_onenand",
.id = -1,
- .parent = NULL,
- .enable = s5pc1xx_sclk1_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_SPDIF,
},
+ .shift = S5PC100_CLKSRC0_ONENAND_SHIFT,
+ .mask = S5PC100_CLKSRC0_ONENAND_MASK,
+ .sources = &clk_src_onenand,
+ .reg_source = S5PC100_CLKSRC0,
};
-void __init s5pc1xx_register_clocks(void)
+static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
{
- struct clk *clkp;
- int ret;
- int ptr;
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
- clkp = init_clocks;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
- clkp = init_clocks_disable;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+ ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK;
+ ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT;
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
+ return rate / (ratio + 1);
+}
- (clkp->enable)(clkp, 0);
- }
+static struct clk clk_dout_pclkd1 = {
+ .name = "dout_pclkd1",
+ .id = -1,
+ .parent = &clk_dout_d1_bus,
+ .get_rate = s5pc100_clk_dout_pclkd1_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
+
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+ ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT;
- s3c_pwmclk_init();
+ return rate / (ratio + 1);
}
-static struct clk clk_fout_apll = {
- .name = "fout_apll",
+
+static struct clk clk_dout_mpll2 = {
+ .name = "dout_mpll2",
.id = -1,
+ .parent = &clk_mout_am.clk,
+ .get_rate = s5pc100_clk_dout_mpll2_get_rate,
};
-static struct clk *clk_src_apll_list[] = {
- [0] = &clk_fin_apll,
- [1] = &clk_fout_apll,
-};
+static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
-static struct clk_sources clk_src_apll = {
- .sources = clk_src_apll_list,
- .nr_sources = ARRAY_SIZE(clk_src_apll_list),
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK;
+ ratio >>= S5PC100_CLKDIV1_CAM_SHIFT;
+
+ return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_cam = {
+ .name = "dout_cam",
+ .id = -1,
+ .parent = &clk_dout_mpll2,
+ .get_rate = s5pc100_clk_dout_cam_get_rate,
};
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- .id = -1,
- },
- .shift = S5PC1XX_CLKSRC0_APLL_SHIFT,
- .mask = S5PC1XX_CLKSRC0_APLL_MASK,
- .sources = &clk_src_apll,
- .reg_source = S5PC1XX_CLK_SRC0,
+static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
+
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+ ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT;
+
+ return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_mpll = {
+ .name = "dout_mpll",
+ .id = -1,
+ .parent = &clk_mout_am.clk,
+ .get_rate = s5pc100_clk_dout_mpll_get_rate,
};
+/* EPLL */
static struct clk clk_fout_epll = {
.name = "fout_epll",
.id = -1,
@@ -827,91 +409,57 @@ static struct clksrc_clk clk_mout_epll = {
.name = "mout_epll",
.id = -1,
},
- .shift = S5PC1XX_CLKSRC0_EPLL_SHIFT,
- .mask = S5PC1XX_CLKSRC0_EPLL_MASK,
+ .shift = S5PC100_CLKSRC0_EPLL_SHIFT,
+ .mask = S5PC100_CLKSRC0_EPLL_MASK,
.sources = &clk_src_epll,
- .reg_source = S5PC1XX_CLK_SRC0,
+ .reg_source = S5PC100_CLKSRC0,
};
-static struct clk *clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &clk_fout_mpll,
-};
-
-static struct clk_sources clk_src_mpll = {
- .sources = clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- .id = -1,
- },
- .shift = S5PC1XX_CLKSRC0_MPLL_SHIFT,
- .mask = S5PC1XX_CLKSRC0_MPLL_MASK,
- .sources = &clk_src_mpll,
- .reg_source = S5PC1XX_CLK_SRC0,
-};
-
-static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkdiv;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
- rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
-
- return rate;
-}
-
-static struct clk clk_dout_mpll = {
- .name = "dout_mpll",
+/* HPLL */
+static struct clk clk_fout_hpll = {
+ .name = "fout_hpll",
.id = -1,
- .parent = &clk_mout_mpll.clk,
- .get_rate = s5pc1xx_clk_doutmpll_get_rate,
};
-static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkdiv;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
- rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
-
- return rate;
-}
-
-struct clk clk_dout_mpll2 = {
- .name = "dout_mpll2",
- .id = -1,
- .parent = &clk_mout_mpll.clk,
- .get_rate = s5pc1xx_clk_doutmpll2_get_rate,
+static struct clk *clk_src_hpll_list[] = {
+ [0] = &clk_27m,
+ [1] = &clk_fout_hpll,
};
-static struct clk *clkset_uart_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- NULL,
- NULL
+static struct clk_sources clk_src_hpll = {
+ .sources = clk_src_hpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_hpll_list),
};
-static struct clk_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
+static struct clksrc_clk clk_mout_hpll = {
+ .clk = {
+ .name = "mout_hpll",
+ .id = -1,
+ },
+ .shift = S5PC100_CLKSRC0_HPLL_SHIFT,
+ .mask = S5PC100_CLKSRC0_HPLL_MASK,
+ .sources = &clk_src_hpll,
+ .reg_source = S5PC100_CLKSRC0,
};
+/* Peripherals */
+/*
+ * The peripheral clocks are all controlled via clocksource followed
+ * by an optional divider and gate stage. We currently roll this into
+ * one clock which hides the intermediate clock from the mux.
+ *
+ * Note, the JPEG clock can only be an even divider...
+ *
+ * The scaler and LCD clocks depend on the S5PC100 version, and also
+ * have a common parent divisor so are not included here.
+ */
+
static inline struct clksrc_clk *to_clksrc(struct clk *clk)
{
return container_of(clk, struct clksrc_clk, clk);
}
-static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+static unsigned long s5pc100_getrate_clksrc(struct clk *clk)
{
struct clksrc_clk *sclk = to_clksrc(clk);
unsigned long rate = clk_get_rate(clk->parent);
@@ -925,7 +473,7 @@ static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
return rate;
}
-static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+static int s5pc100_setrate_clksrc(struct clk *clk, unsigned long rate)
{
struct clksrc_clk *sclk = to_clksrc(clk);
void __iomem *reg = sclk->reg_divider;
@@ -938,14 +486,14 @@ static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
return -EINVAL;
val = __raw_readl(reg);
- val &= ~(0xf << sclk->shift);
- val |= (div - 1) << sclk->shift;
+ val &= ~(0xf << sclk->divider_shift);
+ val |= (div - 1) << sclk->divider_shift;
__raw_writel(val, reg);
return 0;
}
-static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+static int s5pc100_setparent_clksrc(struct clk *clk, struct clk *parent)
{
struct clksrc_clk *sclk = to_clksrc(clk);
struct clk_sources *srcs = sclk->sources;
@@ -970,7 +518,7 @@ static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
return -EINVAL;
}
-static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+static unsigned long s5pc100_roundrate_clksrc(struct clk *clk,
unsigned long rate)
{
unsigned long parent_rate = clk_get_rate(clk->parent);
@@ -992,35 +540,466 @@ static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
return rate;
}
+static struct clk *clkset_spi_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll2,
+ &clk_fin_epll,
+ &clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_spi = {
+ .sources = clkset_spi_list,
+ .nr_sources = ARRAY_SIZE(clkset_spi_list),
+};
+
+static struct clksrc_clk clk_spi0 = {
+ .clk = {
+ .name = "spi_bus",
+ .id = 0,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC1_SPI0_SHIFT,
+ .mask = S5PC100_CLKSRC1_SPI0_MASK,
+ .sources = &clkset_spi,
+ .divider_shift = S5PC100_CLKDIV2_SPI0_SHIFT,
+ .reg_divider = S5PC100_CLKDIV2,
+ .reg_source = S5PC100_CLKSRC1,
+};
+
+static struct clksrc_clk clk_spi1 = {
+ .clk = {
+ .name = "spi_bus",
+ .id = 1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC1_SPI1_SHIFT,
+ .mask = S5PC100_CLKSRC1_SPI1_MASK,
+ .sources = &clkset_spi,
+ .divider_shift = S5PC100_CLKDIV2_SPI1_SHIFT,
+ .reg_divider = S5PC100_CLKDIV2,
+ .reg_source = S5PC100_CLKSRC1,
+};
+
+static struct clksrc_clk clk_spi2 = {
+ .clk = {
+ .name = "spi_bus",
+ .id = 2,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC1_SPI2_SHIFT,
+ .mask = S5PC100_CLKSRC1_SPI2_MASK,
+ .sources = &clkset_spi,
+ .divider_shift = S5PC100_CLKDIV2_SPI2_SHIFT,
+ .reg_divider = S5PC100_CLKDIV2,
+ .reg_source = S5PC100_CLKSRC1,
+};
+
+static struct clk *clkset_uart_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+};
+
+static struct clk_sources clkset_uart = {
+ .sources = clkset_uart_list,
+ .nr_sources = ARRAY_SIZE(clkset_uart_list),
+};
+
static struct clksrc_clk clk_uart_uclk1 = {
.clk = {
.name = "uclk1",
.id = -1,
.ctrlbit = S5PC100_CLKGATE_SCLK0_UART,
- .enable = s5pc1xx_sclk0_ctrl,
- .set_parent = s5pc1xx_setparent_clksrc,
- .get_rate = s5pc1xx_getrate_clksrc,
- .set_rate = s5pc1xx_setrate_clksrc,
- .round_rate = s5pc1xx_roundrate_clksrc,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
},
.shift = S5PC100_CLKSRC1_UART_SHIFT,
.mask = S5PC100_CLKSRC1_UART_MASK,
.sources = &clkset_uart,
.divider_shift = S5PC100_CLKDIV2_UART_SHIFT,
- .reg_divider = S5PC1XX_CLK_DIV2,
- .reg_source = S5PC1XX_CLK_SRC1,
+ .reg_divider = S5PC100_CLKDIV2,
+ .reg_source = S5PC100_CLKSRC1,
+};
+
+static struct clk clk_iis_cd0 = {
+ .name = "iis_cdclk0",
+ .id = -1,
+};
+
+static struct clk clk_iis_cd1 = {
+ .name = "iis_cdclk1",
+ .id = -1,
+};
+
+static struct clk clk_iis_cd2 = {
+ .name = "iis_cdclk2",
+ .id = -1,
+};
+
+static struct clk clk_pcm_cd0 = {
+ .name = "pcm_cdclk0",
+ .id = -1,
+};
+
+static struct clk clk_pcm_cd1 = {
+ .name = "pcm_cdclk1",
+ .id = -1,
+};
+
+static struct clk *clkset_audio0_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_fin_epll,
+ &clk_iis_cd0,
+ &clk_pcm_cd0,
+ &clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio0 = {
+ .sources = clkset_audio0_list,
+ .nr_sources = ARRAY_SIZE(clkset_audio0_list),
+};
+
+static struct clksrc_clk clk_audio0 = {
+ .clk = {
+ .name = "audio-bus",
+ .id = 0,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0,
+ .enable = s5pc100_sclk1_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC3_AUDIO0_SHIFT,
+ .mask = S5PC100_CLKSRC3_AUDIO0_MASK,
+ .sources = &clkset_audio0,
+ .divider_shift = S5PC100_CLKDIV4_AUDIO0_SHIFT,
+ .reg_divider = S5PC100_CLKDIV4,
+ .reg_source = S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_audio1_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_fin_epll,
+ &clk_iis_cd1,
+ &clk_pcm_cd1,
+ &clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio1 = {
+ .sources = clkset_audio1_list,
+ .nr_sources = ARRAY_SIZE(clkset_audio1_list),
+};
+
+static struct clksrc_clk clk_audio1 = {
+ .clk = {
+ .name = "audio-bus",
+ .id = 1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1,
+ .enable = s5pc100_sclk1_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC3_AUDIO1_SHIFT,
+ .mask = S5PC100_CLKSRC3_AUDIO1_MASK,
+ .sources = &clkset_audio1,
+ .divider_shift = S5PC100_CLKDIV4_AUDIO1_SHIFT,
+ .reg_divider = S5PC100_CLKDIV4,
+ .reg_source = S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_audio2_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_fin_epll,
+ &clk_iis_cd2,
+ &clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio2 = {
+ .sources = clkset_audio2_list,
+ .nr_sources = ARRAY_SIZE(clkset_audio2_list),
+};
+
+static struct clksrc_clk clk_audio2 = {
+ .clk = {
+ .name = "audio-bus",
+ .id = 2,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2,
+ .enable = s5pc100_sclk1_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC3_AUDIO2_SHIFT,
+ .mask = S5PC100_CLKSRC3_AUDIO2_MASK,
+ .sources = &clkset_audio2,
+ .divider_shift = S5PC100_CLKDIV4_AUDIO2_SHIFT,
+ .reg_divider = S5PC100_CLKDIV4,
+ .reg_source = S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_spdif_list[] = {
+ &clk_audio0.clk,
+ &clk_audio1.clk,
+ &clk_audio2.clk,
+};
+
+static struct clk_sources clkset_spdif = {
+ .sources = clkset_spdif_list,
+ .nr_sources = ARRAY_SIZE(clkset_spdif_list),
+};
+
+static struct clksrc_clk clk_spdif = {
+ .clk = {
+ .name = "spdif",
+ .id = -1,
+ },
+ .shift = S5PC100_CLKSRC3_SPDIF_SHIFT,
+ .mask = S5PC100_CLKSRC3_SPDIF_MASK,
+ .sources = &clkset_spdif,
+ .reg_source = S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_lcd_fimc_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_mout_hpll.clk,
+ &clk_vclk_54m,
+};
+
+static struct clk_sources clkset_lcd_fimc = {
+ .sources = clkset_lcd_fimc_list,
+ .nr_sources = ARRAY_SIZE(clkset_lcd_fimc_list),
+};
+
+static struct clksrc_clk clk_lcd = {
+ .clk = {
+ .name = "lcd",
+ .id = -1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD,
+ .enable = s5pc100_sclk1_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC2_LCD_SHIFT,
+ .mask = S5PC100_CLKSRC2_LCD_MASK,
+ .sources = &clkset_lcd_fimc,
+ .divider_shift = S5PC100_CLKDIV3_LCD_SHIFT,
+ .reg_divider = S5PC100_CLKDIV3,
+ .reg_source = S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc0 = {
+ .clk = {
+ .name = "fimc",
+ .id = 0,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0,
+ .enable = s5pc100_sclk1_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC2_FIMC0_SHIFT,
+ .mask = S5PC100_CLKSRC2_FIMC0_MASK,
+ .sources = &clkset_lcd_fimc,
+ .divider_shift = S5PC100_CLKDIV3_FIMC0_SHIFT,
+ .reg_divider = S5PC100_CLKDIV3,
+ .reg_source = S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc1 = {
+ .clk = {
+ .name = "fimc",
+ .id = 1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1,
+ .enable = s5pc100_sclk1_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC2_FIMC1_SHIFT,
+ .mask = S5PC100_CLKSRC2_FIMC1_MASK,
+ .sources = &clkset_lcd_fimc,
+ .divider_shift = S5PC100_CLKDIV3_FIMC1_SHIFT,
+ .reg_divider = S5PC100_CLKDIV3,
+ .reg_source = S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc2 = {
+ .clk = {
+ .name = "fimc",
+ .id = 2,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2,
+ .enable = s5pc100_sclk1_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC2_FIMC2_SHIFT,
+ .mask = S5PC100_CLKSRC2_FIMC2_MASK,
+ .sources = &clkset_lcd_fimc,
+ .divider_shift = S5PC100_CLKDIV3_FIMC2_SHIFT,
+ .reg_divider = S5PC100_CLKDIV3,
+ .reg_source = S5PC100_CLKSRC2,
+};
+
+static struct clk *clkset_mmc_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_fin_epll,
+ &clk_mout_hpll.clk ,
+};
+
+static struct clk_sources clkset_mmc = {
+ .sources = clkset_mmc_list,
+ .nr_sources = ARRAY_SIZE(clkset_mmc_list),
+};
+
+static struct clksrc_clk clk_mmc0 = {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 0,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC2_MMC0_SHIFT,
+ .mask = S5PC100_CLKSRC2_MMC0_MASK,
+ .sources = &clkset_mmc,
+ .divider_shift = S5PC100_CLKDIV3_MMC0_SHIFT,
+ .reg_divider = S5PC100_CLKDIV3,
+ .reg_source = S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_mmc1 = {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC2_MMC1_SHIFT,
+ .mask = S5PC100_CLKSRC2_MMC1_MASK,
+ .sources = &clkset_mmc,
+ .divider_shift = S5PC100_CLKDIV3_MMC1_SHIFT,
+ .reg_divider = S5PC100_CLKDIV3,
+ .reg_source = S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_mmc2 = {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 2,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC2_MMC2_SHIFT,
+ .mask = S5PC100_CLKSRC2_MMC2_MASK,
+ .sources = &clkset_mmc,
+ .divider_shift = S5PC100_CLKDIV3_MMC2_SHIFT,
+ .reg_divider = S5PC100_CLKDIV3,
+ .reg_source = S5PC100_CLKSRC2,
+};
+
+
+static struct clk *clkset_usbhost_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_mout_hpll.clk,
+ &clk_48m,
+};
+
+static struct clk_sources clkset_usbhost = {
+ .sources = clkset_usbhost_list,
+ .nr_sources = ARRAY_SIZE(clkset_usbhost_list),
+};
+
+static struct clksrc_clk clk_usbhost = {
+ .clk = {
+ .name = "usbhost",
+ .id = -1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC1_UHOST_SHIFT,
+ .mask = S5PC100_CLKSRC1_UHOST_MASK,
+ .sources = &clkset_usbhost,
+ .divider_shift = S5PC100_CLKDIV2_UHOST_SHIFT,
+ .reg_divider = S5PC100_CLKDIV2,
+ .reg_source = S5PC100_CLKSRC1,
};
/* Clock initialisation code */
static struct clksrc_clk *init_parents[] = {
&clk_mout_apll,
- &clk_mout_epll,
&clk_mout_mpll,
+ &clk_mout_am,
+ &clk_mout_onenand,
+ &clk_mout_epll,
+ &clk_mout_hpll,
+ &clk_spi0,
+ &clk_spi1,
+ &clk_spi2,
&clk_uart_uclk1,
+ &clk_audio0,
+ &clk_audio1,
+ &clk_audio2,
+ &clk_spdif,
+ &clk_lcd,
+ &clk_fimc0,
+ &clk_fimc1,
+ &clk_fimc2,
+ &clk_mmc0,
+ &clk_mmc1,
+ &clk_mmc2,
+ &clk_usbhost,
};
-static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+static void __init_or_cpufreq s5pc100_set_clksrc(struct clksrc_clk *clk)
{
struct clk_sources *srcs = clk->sources;
u32 clksrc = __raw_readl(clk->reg_source);
@@ -1036,9 +1015,9 @@ static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
clk->clk.parent = srcs->sources[clksrc];
- printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
- clk->clk.name, clk->clk.parent->name, clksrc,
- clk_get_rate(&clk->clk));
+ printk(KERN_INFO "%s: source is %s (%d), rate is %ld.%03ld MHz\n",
+ clk->clk.name, clk->clk.parent->name, clksrc,
+ print_mhz(clk_get_rate(&clk->clk)));
}
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
@@ -1052,20 +1031,16 @@ void __init_or_cpufreq s5pc100_setup_clocks(void)
unsigned long hclk;
unsigned long pclkd0;
unsigned long pclk;
- unsigned long apll;
- unsigned long mpll;
- unsigned long hpll;
- unsigned long epll;
+ unsigned long apll, mpll, epll, hpll;
unsigned int ptr;
u32 clkdiv0, clkdiv1;
printk(KERN_DEBUG "%s: registering clocks\n", __func__);
- clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
- clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+ clkdiv0 = __raw_readl(S5PC100_CLKDIV0);
+ clkdiv1 = __raw_readl(S5PC100_CLKDIV1);
- printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
- __func__, clkdiv0, clkdiv1);
+ printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1);
xtal_clk = clk_get(NULL, "xtal");
BUG_ON(IS_ERR(xtal_clk));
@@ -1075,48 +1050,81 @@ void __init_or_cpufreq s5pc100_setup_clocks(void)
printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
- apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
- mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
- epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+ apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON));
+ mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON));
+ epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON));
hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
- printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
- apll, mpll, epll, hpll);
+ printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz"
+ ", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n",
+ print_mhz(apll), print_mhz(mpll),
+ print_mhz(epll), print_mhz(hpll));
- armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+ armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL);
armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
- printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
- armclk, hclkd0, pclkd0, hclk, pclk);
+ printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz,"
+ " PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz,"
+ " PCLK=%ld.%03ld MHz\n",
+ print_mhz(armclk), print_mhz(hclkd0),
+ print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk));
clk_fout_apll.rate = apll;
clk_fout_mpll.rate = mpll;
clk_fout_epll.rate = epll;
- clk_fout_apll.rate = apll;
+ clk_fout_hpll.rate = hpll;
clk_h.rate = hclk;
clk_p.rate = pclk;
+ clk_f.rate = armclk;
for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s5pc1xx_set_clksrc(init_parents[ptr]);
+ s5pc100_set_clksrc(init_parents[ptr]);
}
static struct clk *clks[] __initdata = {
&clk_ext_xtal_mux,
- &clk_mout_epll.clk,
- &clk_fout_epll,
+ &clk_mout_apll.clk,
+ &clk_dout_apll,
+ &clk_dout_d0_bus,
+ &clk_dout_pclkd0,
+ &clk_dout_apll2,
&clk_mout_mpll.clk,
+ &clk_mout_am.clk,
+ &clk_dout_d1_bus,
+ &clk_mout_onenand.clk,
+ &clk_dout_pclkd1,
+ &clk_dout_mpll2,
+ &clk_dout_cam,
&clk_dout_mpll,
+ &clk_mout_epll.clk,
+ &clk_fout_epll,
+ &clk_iis_cd0,
+ &clk_iis_cd1,
+ &clk_iis_cd2,
+ &clk_pcm_cd0,
+ &clk_pcm_cd1,
+ &clk_spi0.clk,
+ &clk_spi1.clk,
+ &clk_spi2.clk,
&clk_uart_uclk1.clk,
- &clk_ext,
- &clk_epll,
- &clk_27m,
- &clk_48m,
- &clk_54m,
+ &clk_audio0.clk,
+ &clk_audio1.clk,
+ &clk_audio2.clk,
+ &clk_spdif.clk,
+ &clk_lcd.clk,
+ &clk_fimc0.clk,
+ &clk_fimc1.clk,
+ &clk_fimc2.clk,
+ &clk_mmc0.clk,
+ &clk_mmc1.clk,
+ &clk_mmc2.clk,
+ &clk_usbhost.clk,
+ &clk_arm,
};
void __init s5pc100_register_clocks(void)
@@ -1133,7 +1141,4 @@ void __init s5pc100_register_clocks(void)
clkp->name, ret);
}
}
-
- clk_mpll.parent = &clk_mout_mpll.clk;
- clk_epll.parent = &clk_mout_epll.clk;
}
diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
new file mode 100644
index 00000000000..1a63768a9a2
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
@@ -0,0 +1,49 @@
+/*
+ * linux/arch/arm/plat-s5pc100/setup-fb-24bpp.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * Base S5PC1XX setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-s5pc1xx.h>
+
+#define DISR_OFFSET 0x7008
+
+void s5pc100_fb_gpio_setup_24bpp(void)
+{
+ unsigned int gpio = 0;
+
+ for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
index 3d00c025fff..5e4a7c3a231 100644
--- a/arch/arm/plat-s5pc1xx/setup-i2c0.c
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -17,9 +17,14 @@
struct platform_device; /* don't need the contents */
+#include <linux/gpio.h>
#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- /* Pin configuration would be needed */
+ s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
index c8f3ca42f51..a0a8b4ae6ad 100644
--- a/arch/arm/plat-s5pc1xx/setup-i2c1.c
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -17,9 +17,14 @@
struct platform_device; /* don't need the contents */
+#include <linux/gpio.h>
#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
- /* Pin configuration would be needed */
+ s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
new file mode 100644
index 00000000000..185c8941e64
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2009 Samsung Eletronics
+ *
+ * S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+
+void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+ unsigned int end;
+ unsigned int num;
+
+ num = width;
+ /* In case of 8 width, we should decrease the 2 */
+ if (width == 8)
+ num = width - 2;
+
+ end = S5PC100_GPG0(2 + num);
+
+ /* Set all the necessary GPG0/GPG1 pins to special-function 0 */
+ for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ if (width == 8) {
+ for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+ }
+
+ s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+ unsigned int end;
+
+ end = S5PC100_GPG2(2 + width);
+
+ /* Set all the necessary GPG2 pins to special-function 2 */
+ for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+ unsigned int end;
+
+ end = S5PC100_GPG3(2 + width);
+
+ /* Set all the necessary GPG3 pins to special-function 2 */
+ for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+}