diff options
Diffstat (limited to 'arch/arm/plat-samsung/Kconfig')
| -rw-r--r-- | arch/arm/plat-samsung/Kconfig | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index a0ffc77da80..f8c571031da 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -13,6 +13,24 @@ config PLAT_SAMSUNG help Base platform code for all Samsung SoC based systems +config PLAT_S5P + bool + depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) + default y + select ARM_VIC if !ARCH_EXYNOS + select ARM_GIC if ARCH_EXYNOS + select GIC_NON_BANKED if ARCH_EXYNOS4 + select NO_IOPORT + select ARCH_REQUIRE_GPIOLIB + select S3C_GPIO_TRACK + select S5P_GPIO_DRVSTR + select SAMSUNG_GPIOLIB_4BIT + select PLAT_SAMSUNG + select SAMSUNG_CLKSRC + select SAMSUNG_IRQ_VIC_TIMER + help + Base platform code for Samsung's S5P series SoC. + if PLAT_SAMSUNG # boot configurations @@ -50,6 +68,14 @@ config S3C_LOWLEVEL_UART_PORT this configuration should be between zero and two. The port must have been initialised by the boot-loader before use. +# timer options + +config S5P_HRT + bool + select SAMSUNG_DEV_PWM + help + Use the High Resolution timer support + # clock options config SAMSUNG_CLKSRC @@ -58,6 +84,11 @@ config SAMSUNG_CLKSRC Select the clock code for the clksrc implementation used by newer systems such as the S3C64XX. +config S5P_CLOCK + def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) + help + Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs + # options for IRQ support config SAMSUNG_IRQ_VIC_TIMER @@ -65,6 +96,22 @@ config SAMSUNG_IRQ_VIC_TIMER help Internal configuration to build the VIC timer interrupt code. +config S5P_IRQ + def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) + help + Support common interrup part for ARCH_S5P and ARCH_EXYNOS SoCs + +config S5P_EXT_INT + bool + help + Use the external interrupts (other than GPIO interrupts.) + Note: Do not choose this for S5P6440 and S5P6450. + +config S5P_GPIO_INT + bool + help + Common code for the GPIO interrupts (other than external interrupts.) + # options for gpio configuration support config SAMSUNG_GPIOLIB_4BIT @@ -117,6 +164,12 @@ config S3C_GPIO_TRACK Internal configuration option to enable the s3c specific gpio chip tracking if the platform requires it. +# uart options + +config S5P_DEV_UART + def_bool y + depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) + # ADC driver config S3C_ADC @@ -274,6 +327,76 @@ config SAMSUNG_DEV_BACKLIGHT help Compile in platform device definition LCD backlight with PWM Timer +config S5P_DEV_CSIS0 + bool + help + Compile in platform device definitions for MIPI-CSIS channel 0 + +config S5P_DEV_CSIS1 + bool + help + Compile in platform device definitions for MIPI-CSIS channel 1 + +config S5P_DEV_FIMC0 + bool + help + Compile in platform device definitions for FIMC controller 0 + +config S5P_DEV_FIMC1 + bool + help + Compile in platform device definitions for FIMC controller 1 + +config S5P_DEV_FIMC2 + bool + help + Compile in platform device definitions for FIMC controller 2 + +config S5P_DEV_FIMC3 + bool + help + Compile in platform device definitions for FIMC controller 3 + +config S5P_DEV_FIMD0 + bool + help + Compile in platform device definitions for FIMD controller 0 + +config S5P_DEV_G2D + bool + help + Compile in platform device definitions for G2D device + +config S5P_DEV_I2C_HDMIPHY + bool + help + Compile in platform device definitions for I2C HDMIPHY controller + +config S5P_DEV_JPEG + bool + help + Compile in platform device definitions for JPEG codec + +config S5P_DEV_MFC + bool + help + Compile in setup memory (init) code for MFC + +config S5P_DEV_ONENAND + bool + help + Compile in platform device definition for OneNAND controller + +config S5P_DEV_TV + bool + help + Compile in platform device definition for TV interface + +config S5P_DEV_USB_EHCI + bool + help + Compile in platform device definition for USB EHCI + config S3C24XX_PWM bool "PWM device support" select HAVE_PWM @@ -281,6 +404,11 @@ config S3C24XX_PWM Support for exporting the PWM timer blocks via the pwm device system +config S5P_SETUP_MIPIPHY + bool + help + Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices + # DMA config S3C_DMA @@ -351,6 +479,18 @@ config SAMSUNG_WAKEMASK and above. This code allows a set of interrupt to wakeup-mask mappings. See <plat/wakeup-mask.h> +config S5P_PM + bool + help + Common code for power management support on S5P and newer SoCs + Note: Do not select this for S5P6440 and S5P6450. + +config S5P_SLEEP + bool + help + Internal config node to apply common S5P sleep management code. + Can be selected by S5P and newer SoCs with similar sleep procedure. + comment "Power Domain" config SAMSUNG_PD |