diff options
Diffstat (limited to 'arch/arm/plat-samsung/include')
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/audio.h | 9 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/devs.h | 7 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h | 6 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/gpio-cfg.h | 56 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/gpio-core.h | 15 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/iic.h | 10 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/map-base.h | 4 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/nand-core.h | 28 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/sdhci.h | 64 |
9 files changed, 197 insertions, 2 deletions
diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h index e32f9edfd4b..7712ff6336f 100644 --- a/arch/arm/plat-samsung/include/plat/audio.h +++ b/arch/arm/plat-samsung/include/plat/audio.h @@ -16,6 +16,15 @@ #define S3C64XX_AC97_GPE 1 extern void s3c64xx_ac97_setup_gpio(int); +/* + * The machine init code calls s5p*_spdif_setup_gpio with + * one of these defines in order to select appropriate bank + * of GPIO for S/PDIF pins + */ +#define S5PC100_SPDIF_GPD 0 +#define S5PC100_SPDIF_GPG3 1 +extern void s5pc100_spdif_setup_gpio(int); + /** * struct s3c_audio_pdata - common platform data for audio device drivers * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index c8b94279bad..2d82a6cb144 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -48,6 +48,11 @@ extern struct platform_device s3c_device_wdt; extern struct platform_device s3c_device_i2c0; extern struct platform_device s3c_device_i2c1; extern struct platform_device s3c_device_i2c2; +extern struct platform_device s3c_device_i2c3; +extern struct platform_device s3c_device_i2c4; +extern struct platform_device s3c_device_i2c5; +extern struct platform_device s3c_device_i2c6; +extern struct platform_device s3c_device_i2c7; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; @@ -89,6 +94,7 @@ extern struct platform_device s5pv210_device_pcm2; extern struct platform_device s5pv210_device_iis0; extern struct platform_device s5pv210_device_iis1; extern struct platform_device s5pv210_device_iis2; +extern struct platform_device s5pv210_device_spdif; extern struct platform_device s5p6442_device_pcm0; extern struct platform_device s5p6442_device_pcm1; @@ -108,6 +114,7 @@ extern struct platform_device s5pc100_device_pcm1; extern struct platform_device s5pc100_device_iis0; extern struct platform_device s5pc100_device_iis1; extern struct platform_device s5pc100_device_iis2; +extern struct platform_device s5pc100_device_spdif; extern struct platform_device samsung_device_keypad; diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 3e21c75feef..8fd65d8b586 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -42,6 +42,12 @@ static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, return (chip->config->set_pull)(chip, off, pull); } +static inline s3c_gpio_pull_t s3c_gpio_do_getpull(struct s3c_gpio_chip *chip, + unsigned int off) +{ + return chip->config->get_pull(chip, off); +} + /** * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration. * @chip: The gpio chip that is being configured. diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 1c6b92947c5..e4b5cf126fa 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -108,6 +108,19 @@ extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to); */ extern unsigned s3c_gpio_getcfg(unsigned int pin); +/** + * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range + * @start: The pin number to start at + * @nr: The number of pins to configure from @start. + * @cfg: The configuration for the pin's function + * + * Call s3c_gpio_cfgpin() for the @nr pins starting at @start. + * + * @sa s3c_gpio_cfgpin. + */ +extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, + unsigned int cfg); + /* Define values for the pull-{up,down} available for each gpio pin. * * These values control the state of the weak pull-{up,down} resistors @@ -140,6 +153,31 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); */ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); +/* configure `all` aspects of an gpio */ + +/** + * s3c_gpio_cfgall_range() - configure range of gpio functtion and pull. + * @start: The gpio number to start at. + * @nr: The number of gpio to configure from @start. + * @cfg: The configuration to use + * @pull: The pull setting to use. + * + * Run s3c_gpio_cfgpin() and s3c_gpio_setpull() over the gpio range starting + * @gpio and running for @size. + * + * @sa s3c_gpio_cfgpin + * @sa s3c_gpio_setpull + * @sa s3c_gpio_cfgpin_range + */ +extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, + unsigned int cfg, s3c_gpio_pull_t pull); + +static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size, + unsigned int cfg) +{ + return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE); +} + /* Define values for the drvstr available for each gpio pin. * * These values control the value of the output signal driver strength, @@ -169,4 +207,22 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin); */ extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); +/** + * s5p_register_gpio_interrupt() - register interrupt support for a gpio group + * @pin: The pin number from the group to be registered + * + * This function registers gpio interrupt support for the group that the + * specified pin belongs to. + * + * The total number of gpio pins is quite large ob s5p series. Registering + * irq support for all of them would be a resource waste. Because of that the + * interrupt support for standard gpio pins is registered dynamically. + * + * It will return the irq number of the interrupt that has been registered + * or -ENOMEM if no more gpio interrupts can be registered. It is allowed + * to call this function more than once for the same gpio group (the group + * will be registered only once). + */ +extern int s5p_register_gpio_interrupt(int pin); + #endif /* __PLAT_GPIO_CFG_H */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index e358c7da848..13a22b8861e 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -43,6 +43,8 @@ struct s3c_gpio_cfg; * struct s3c_gpio_chip - wrapper for specific implementation of gpio * @chip: The chip structure to be exported via gpiolib. * @base: The base pointer to the gpio configuration registers. + * @group: The group register number for gpio interrupt support. + * @irq_base: The base irq number. * @config: special function and pull-resistor control information. * @lock: Lock for exclusive access to this gpio bank. * @pm_save: Save information for suspend/resume support. @@ -63,6 +65,8 @@ struct s3c_gpio_chip { struct s3c_gpio_cfg *config; struct s3c_gpio_pm *pm; void __iomem *base; + int irq_base; + int group; spinlock_t lock; #ifdef CONFIG_PM u32 pm_save[4]; @@ -118,6 +122,17 @@ extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); + +/** + * samsung_gpiolib_to_irq - convert gpio pin to irq number + * @chip: The gpio chip that the pin belongs to. + * @offset: The offset of the pin in the chip. + * + * This helper returns the irq number calculated from the chip->irq_base and + * the provided offset. + */ +extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset); + /* exported for core SoC support to change */ extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default; diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h index 133308bf595..1543da8f85c 100644 --- a/arch/arm/plat-samsung/include/plat/iic.h +++ b/arch/arm/plat-samsung/include/plat/iic.h @@ -55,10 +55,20 @@ struct s3c2410_platform_i2c { extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c); extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c); extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c); /* defined by architecture to configure gpio */ extern void s3c_i2c0_cfg_gpio(struct platform_device *dev); extern void s3c_i2c1_cfg_gpio(struct platform_device *dev); extern void s3c_i2c2_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c3_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c4_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c5_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c6_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c7_cfg_gpio(struct platform_device *dev); #endif /* __ASM_ARCH_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/map-base.h b/arch/arm/plat-samsung/include/plat/map-base.h index 250be311c85..3ffac4d2e4f 100644 --- a/arch/arm/plat-samsung/include/plat/map-base.h +++ b/arch/arm/plat-samsung/include/plat/map-base.h @@ -14,7 +14,7 @@ #ifndef __ASM_PLAT_MAP_H #define __ASM_PLAT_MAP_H __FILE__ -/* Fit all our registers in at 0xF4000000 upwards, trying to use as +/* Fit all our registers in at 0xF6000000 upwards, trying to use as * little of the VA space as possible so vmalloc and friends have a * better chance of getting memory. * @@ -22,7 +22,7 @@ * an single MOVS instruction (ie, only 8 bits of set data) */ -#define S3C_ADDR_BASE (0xF4000000) +#define S3C_ADDR_BASE 0xF6000000 #ifndef __ASSEMBLY__ #define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x)) diff --git a/arch/arm/plat-samsung/include/plat/nand-core.h b/arch/arm/plat-samsung/include/plat/nand-core.h new file mode 100644 index 00000000000..6de20789a95 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/nand-core.h @@ -0,0 +1,28 @@ +/* arch/arm/plat-samsung/include/plat/nand-core.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S3C - Nand Controller core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_NAND_CORE_H +#define __ASM_ARCH_NAND_CORE_H __FILE__ + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c_nand_setname(char *name) +{ +#ifdef CONFIG_S3C_DEV_NAND + s3c_device_nand.name = name; +#endif +} + +#endif /* __ASM_ARCH_NAND_CORE_H */ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 30844c263d0..85853f8c4c5 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -28,11 +28,17 @@ enum cd_types { S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */ }; +enum clk_types { + S3C_SDHCI_CLK_DIV_INTERNAL, /* use mmc internal clock divider */ + S3C_SDHCI_CLK_DIV_EXTERNAL, /* use external clock divider */ +}; + /** * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI * @max_width: The maximum number of data bits supported. * @host_caps: Standard MMC host capabilities bit field. * @cd_type: Type of Card Detection method (see cd_types enum above) + * @clk_type: Type of clock divider method (see clk_types enum above) * @ext_cd_init: Initialize external card detect subsystem. Called on * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL. * notify_func argument is a callback to the sdhci-s3c driver @@ -59,6 +65,7 @@ struct s3c_sdhci_platdata { unsigned int max_width; unsigned int host_caps; enum cd_types cd_type; + enum clk_types clk_type; char **clocks; /* set of clock sources */ @@ -110,6 +117,10 @@ extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w); +extern void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *, int w); /* S3C64XX SDHCI setup */ @@ -288,4 +299,57 @@ static inline void s5pv210_default_sdhci3(void) { } #endif /* CONFIG_S5PV210_SETUP_SDHCI */ +/* S5PV310 SDHCI setup */ +#ifdef CONFIG_S5PV310_SETUP_SDHCI +extern char *s5pv310_hsmmc_clksrcs[4]; + +extern void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card); + +static inline void s5pv310_default_sdhci0(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC + s3c_hsmmc0_def_platdata.clocks = s5pv310_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = s5pv310_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; +#endif +} + +static inline void s5pv310_default_sdhci1(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC1 + s3c_hsmmc1_def_platdata.clocks = s5pv310_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = s5pv310_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; +#endif +} + +static inline void s5pv310_default_sdhci2(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC2 + s3c_hsmmc2_def_platdata.clocks = s5pv310_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = s5pv310_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; +#endif +} + +static inline void s5pv310_default_sdhci3(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC3 + s3c_hsmmc3_def_platdata.clocks = s5pv310_hsmmc_clksrcs; + s3c_hsmmc3_def_platdata.cfg_gpio = s5pv310_setup_sdhci3_cfg_gpio; + s3c_hsmmc3_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; +#endif +} + +#else +static inline void s5pv310_default_sdhci0(void) { } +static inline void s5pv310_default_sdhci1(void) { } +static inline void s5pv310_default_sdhci2(void) { } +static inline void s5pv310_default_sdhci3(void) { } + +#endif /* CONFIG_S5PV310_SETUP_SDHCI */ + #endif /* __PLAT_S3C_SDHCI_H */ |