diff options
Diffstat (limited to 'arch/arm/plat-samsung')
39 files changed, 453 insertions, 320 deletions
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 4d79519d19a..b3e10659e4b 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -280,6 +280,12 @@ config SAMSUNG_DEV_PWM help Compile in platform device definition for PWM Timer +config SAMSUNG_DEV_BACKLIGHT + bool + depends on SAMSUNG_DEV_PWM + help + Compile in platform device definition LCD backlight with PWM Timer + config S3C24XX_PWM bool "PWM device support" select HAVE_PWM diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 53eb15b0a07..853764ba8cc 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o obj-$(CONFIG_SAMSUNG_DEV_PWM) += dev-pwm.o +obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o # DMA support diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index e8f2be2d67f..ee8deef1948 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -21,6 +21,7 @@ #include <linux/clk.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/regulator/consumer.h> #include <plat/regs-adc.h> #include <plat/adc.h> @@ -39,8 +40,9 @@ */ enum s3c_cpu_type { - TYPE_S3C24XX, - TYPE_S3C64XX + TYPE_ADCV1, /* S3C24XX */ + TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */ + TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */ }; struct s3c_adc_client { @@ -71,6 +73,7 @@ struct adc_device { unsigned int prescale; int irq; + struct regulator *vdd; }; static struct adc_device *adc_dev; @@ -91,6 +94,7 @@ static inline void s3c_adc_select(struct adc_device *adc, struct s3c_adc_client *client) { unsigned con = readl(adc->regs + S3C2410_ADCCON); + enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data; client->select_cb(client, 1); @@ -98,8 +102,12 @@ static inline void s3c_adc_select(struct adc_device *adc, con &= ~S3C2410_ADCCON_STDBM; con &= ~S3C2410_ADCCON_STARTMASK; - if (!client->is_ts) - con |= S3C2410_ADCCON_SELMUX(client->channel); + if (!client->is_ts) { + if (cpu == TYPE_ADCV3) + writel(client->channel & 0xf, adc->regs + S5P_ADCMUX); + else + con |= S3C2410_ADCCON_SELMUX(client->channel); + } writel(con, adc->regs + S3C2410_ADCCON); } @@ -285,8 +293,8 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) client->nr_samples--; - if (cpu == TYPE_S3C64XX) { - /* S3C64XX ADC resolution is 12-bit */ + if (cpu != TYPE_ADCV1) { + /* S3C64XX/S5P ADC resolution is 12-bit */ data0 &= 0xfff; data1 &= 0xfff; } else { @@ -312,7 +320,7 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) } exit: - if (cpu == TYPE_S3C64XX) { + if (cpu != TYPE_ADCV1) { /* Clear ADC interrupt */ writel(0, adc->regs + S3C64XX_ADCCLRINT); } @@ -338,17 +346,24 @@ static int s3c_adc_probe(struct platform_device *pdev) adc->pdev = pdev; adc->prescale = S3C2410_ADCCON_PRSCVL(49); + adc->vdd = regulator_get(dev, "vdd"); + if (IS_ERR(adc->vdd)) { + dev_err(dev, "operating without regulator \"vdd\" .\n"); + ret = PTR_ERR(adc->vdd); + goto err_alloc; + } + adc->irq = platform_get_irq(pdev, 1); if (adc->irq <= 0) { dev_err(dev, "failed to get adc irq\n"); ret = -ENOENT; - goto err_alloc; + goto err_reg; } ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc); if (ret < 0) { dev_err(dev, "failed to attach adc irq\n"); - goto err_alloc; + goto err_reg; } adc->clk = clk_get(dev, "adc"); @@ -372,10 +387,14 @@ static int s3c_adc_probe(struct platform_device *pdev) goto err_clk; } + ret = regulator_enable(adc->vdd); + if (ret) + goto err_ioremap; + clk_enable(adc->clk); tmp = adc->prescale | S3C2410_ADCCON_PRSCEN; - if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) { + if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1) { /* Enable 12-bit ADC resolution */ tmp |= S3C64XX_ADCCON_RESSEL; } @@ -388,12 +407,15 @@ static int s3c_adc_probe(struct platform_device *pdev) return 0; + err_ioremap: + iounmap(adc->regs); err_clk: clk_put(adc->clk); err_irq: free_irq(adc->irq, adc); - + err_reg: + regulator_put(adc->vdd); err_alloc: kfree(adc); return ret; @@ -406,6 +428,8 @@ static int __devexit s3c_adc_remove(struct platform_device *pdev) iounmap(adc->regs); free_irq(adc->irq, adc); clk_disable(adc->clk); + regulator_disable(adc->vdd); + regulator_put(adc->vdd); clk_put(adc->clk); kfree(adc); @@ -413,8 +437,10 @@ static int __devexit s3c_adc_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) +static int s3c_adc_suspend(struct device *dev) { + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); struct adc_device *adc = platform_get_drvdata(pdev); unsigned long flags; u32 con; @@ -428,19 +454,30 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) disable_irq(adc->irq); spin_unlock_irqrestore(&adc->lock, flags); clk_disable(adc->clk); + regulator_disable(adc->vdd); return 0; } -static int s3c_adc_resume(struct platform_device *pdev) +static int s3c_adc_resume(struct device *dev) { + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); struct adc_device *adc = platform_get_drvdata(pdev); + int ret; + unsigned long tmp; + ret = regulator_enable(adc->vdd); + if (ret) + return ret; clk_enable(adc->clk); enable_irq(adc->irq); - writel(adc->prescale | S3C2410_ADCCON_PRSCEN, - adc->regs + S3C2410_ADCCON); + tmp = adc->prescale | S3C2410_ADCCON_PRSCEN; + /* Enable 12-bit ADC resolution */ + if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1) + tmp |= S3C64XX_ADCCON_RESSEL; + writel(tmp, adc->regs + S3C2410_ADCCON); return 0; } @@ -453,25 +490,32 @@ static int s3c_adc_resume(struct platform_device *pdev) static struct platform_device_id s3c_adc_driver_ids[] = { { .name = "s3c24xx-adc", - .driver_data = TYPE_S3C24XX, + .driver_data = TYPE_ADCV1, }, { .name = "s3c64xx-adc", - .driver_data = TYPE_S3C64XX, + .driver_data = TYPE_ADCV2, + }, { + .name = "samsung-adc-v3", + .driver_data = TYPE_ADCV3, }, { } }; MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids); +static const struct dev_pm_ops adc_pm_ops = { + .suspend = s3c_adc_suspend, + .resume = s3c_adc_resume, +}; + static struct platform_driver s3c_adc_driver = { .id_table = s3c_adc_driver_ids, .driver = { .name = "s3c-adc", .owner = THIS_MODULE, + .pm = &adc_pm_ops, }, .probe = s3c_adc_probe, .remove = __devexit_p(s3c_adc_remove), - .suspend = s3c_adc_suspend, - .resume = s3c_adc_resume, }; static int __init adc_init(void) @@ -485,4 +529,4 @@ static int __init adc_init(void) return ret; } -arch_initcall(adc_init); +module_init(adc_init); diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 772892826ff..302c42670bd 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -71,74 +71,6 @@ static int clk_null_enable(struct clk *clk, int enable) return 0; } -static int dev_is_s3c_uart(struct device *dev) -{ - struct platform_device **pdev = s3c24xx_uart_devs; - int i; - for (i = 0; i < ARRAY_SIZE(s3c24xx_uart_devs); i++, pdev++) - if (*pdev && dev == &(*pdev)->dev) - return 1; - return 0; -} - -/* - * Serial drivers call get_clock() very early, before platform bus - * has been set up, this requires a special check to let them get - * a proper clock - */ - -static int dev_is_platform_device(struct device *dev) -{ - return dev->bus == &platform_bus_type || - (dev->bus == NULL && dev_is_s3c_uart(dev)); -} - -/* Clock API calls */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *p; - struct clk *clk = ERR_PTR(-ENOENT); - int idno; - - if (dev == NULL || !dev_is_platform_device(dev)) - idno = -1; - else - idno = to_platform_device(dev)->id; - - spin_lock(&clocks_lock); - - list_for_each_entry(p, &clocks, list) { - if (p->id == idno && - strcmp(id, p->name) == 0 && - try_module_get(p->owner)) { - clk = p; - break; - } - } - - /* check for the case where a device was supplied, but the - * clock that was being searched for is not device specific */ - - if (IS_ERR(clk)) { - list_for_each_entry(p, &clocks, list) { - if (p->id == -1 && strcmp(id, p->name) == 0 && - try_module_get(p->owner)) { - clk = p; - break; - } - } - } - - spin_unlock(&clocks_lock); - return clk; -} - -void clk_put(struct clk *clk) -{ - module_put(clk->owner); -} - int clk_enable(struct clk *clk) { if (IS_ERR(clk) || clk == NULL) @@ -241,8 +173,6 @@ int clk_set_parent(struct clk *clk, struct clk *parent) return ret; } -EXPORT_SYMBOL(clk_get); -EXPORT_SYMBOL(clk_put); EXPORT_SYMBOL(clk_enable); EXPORT_SYMBOL(clk_disable); EXPORT_SYMBOL(clk_get_rate); @@ -265,7 +195,6 @@ struct clk_ops clk_ops_def_setrate = { struct clk clk_xtal = { .name = "xtal", - .id = -1, .rate = 0, .parent = NULL, .ctrlbit = 0, @@ -273,30 +202,25 @@ struct clk clk_xtal = { struct clk clk_ext = { .name = "ext", - .id = -1, }; struct clk clk_epll = { .name = "epll", - .id = -1, }; struct clk clk_mpll = { .name = "mpll", - .id = -1, .ops = &clk_ops_def_setrate, }; struct clk clk_upll = { .name = "upll", - .id = -1, .parent = NULL, .ctrlbit = 0, }; struct clk clk_f = { .name = "fclk", - .id = -1, .rate = 0, .parent = &clk_mpll, .ctrlbit = 0, @@ -304,7 +228,6 @@ struct clk clk_f = { struct clk clk_h = { .name = "hclk", - .id = -1, .rate = 0, .parent = NULL, .ctrlbit = 0, @@ -313,7 +236,6 @@ struct clk clk_h = { struct clk clk_p = { .name = "pclk", - .id = -1, .rate = 0, .parent = NULL, .ctrlbit = 0, @@ -322,7 +244,6 @@ struct clk clk_p = { struct clk clk_usb_bus = { .name = "usb-bus", - .id = -1, .rate = 0, .parent = &clk_upll, }; @@ -330,7 +251,6 @@ struct clk clk_usb_bus = { struct clk s3c24xx_uclk = { .name = "uclk", - .id = -1, }; /* initialise the clock system */ @@ -346,14 +266,11 @@ int s3c24xx_register_clock(struct clk *clk) if (clk->enable == NULL) clk->enable = clk_null_enable; - /* add to the list of available clocks */ - - /* Quick check to see if this clock has already been registered. */ - BUG_ON(clk->list.prev != clk->list.next); - - spin_lock(&clocks_lock); - list_add(&clk->list, &clocks); - spin_unlock(&clocks_lock); + /* fill up the clk_lookup structure and register it*/ + clk->lookup.dev_id = clk->devname; + clk->lookup.con_id = clk->name; + clk->lookup.clk = clk; + clkdev_add(&clk->lookup); return 0; } @@ -458,15 +375,12 @@ static struct dentry *clk_debugfs_root; static int clk_debugfs_register_one(struct clk *c) { int err; - struct dentry *d, *child, *child_tmp; + struct dentry *d; struct clk *pa = c->parent; char s[255]; char *p = s; - p += sprintf(p, "%s", c->name); - - if (c->id >= 0) - sprintf(p, ":%d", c->id); + p += sprintf(p, "%s", c->devname); d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root); if (!d) @@ -488,10 +402,7 @@ static int clk_debugfs_register_one(struct clk *c) return 0; err_out: - d = c->dent; - list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child) - debugfs_remove(child); - debugfs_remove(c->dent); + debugfs_remove_recursive(c->dent); return err; } diff --git a/arch/arm/plat-samsung/dev-asocdma.c b/arch/arm/plat-samsung/dev-asocdma.c index a068c4f42d5..97e35d3c064 100644 --- a/arch/arm/plat-samsung/dev-asocdma.c +++ b/arch/arm/plat-samsung/dev-asocdma.c @@ -23,3 +23,13 @@ struct platform_device samsung_asoc_dma = { } }; EXPORT_SYMBOL(samsung_asoc_dma); + +struct platform_device samsung_asoc_idma = { + .name = "samsung-idma", + .id = -1, + .dev = { + .dma_mask = &audio_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; +EXPORT_SYMBOL(samsung_asoc_idma); diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c new file mode 100644 index 00000000000..3cedd4c407a --- /dev/null +++ b/arch/arm/plat-samsung/dev-backlight.c @@ -0,0 +1,149 @@ +/* linux/arch/arm/plat-samsung/dev-backlight.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common infrastructure for PWM Backlight for Samsung boards + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/pwm_backlight.h> + +#include <plat/devs.h> +#include <plat/gpio-cfg.h> +#include <plat/backlight.h> + +static int samsung_bl_init(struct device *dev) +{ + int ret = 0; + struct platform_device *timer_dev = + container_of(dev->parent, struct platform_device, dev); + struct samsung_bl_gpio_info *bl_gpio_info = + timer_dev->dev.platform_data; + + ret = gpio_request(bl_gpio_info->no, "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPIO for LCD Backlight\n"); + return ret; + } + + /* Configure GPIO pin with specific GPIO function for PWM timer */ + s3c_gpio_cfgpin(bl_gpio_info->no, bl_gpio_info->func); + + return 0; +} + +static void samsung_bl_exit(struct device *dev) +{ + struct platform_device *timer_dev = + container_of(dev->parent, struct platform_device, dev); + struct samsung_bl_gpio_info *bl_gpio_info = + timer_dev->dev.platform_data; + + s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT); + gpio_free(bl_gpio_info->no); +} + +/* Initialize few important fields of platform_pwm_backlight_data + * structure with default values. These fields can be overridden by + * board-specific values sent from machine file. + * For ease of operation, these fields are initialized with values + * used by most samsung boards. + * Users has the option of sending info about other parameters + * for their specific boards + */ + +static struct platform_pwm_backlight_data samsung_dfl_bl_data __initdata = { + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = samsung_bl_init, + .exit = samsung_bl_exit, +}; + +static struct platform_device samsung_dfl_bl_device __initdata = { + .name = "pwm-backlight", +}; + +/* samsung_bl_set - Set board specific data (if any) provided by user for + * PWM Backlight control and register specific PWM and backlight device. + * @gpio_info: structure containing GPIO info for PWM timer + * @bl_data: structure containing Backlight control data + */ +void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, + struct platform_pwm_backlight_data *bl_data) +{ + int ret = 0; + struct platform_device *samsung_bl_device; + struct platform_pwm_backlight_data *samsung_bl_data; + + samsung_bl_device = kmemdup(&samsung_dfl_bl_device, + sizeof(struct platform_device), GFP_KERNEL); + if (!samsung_bl_device) { + printk(KERN_ERR "%s: no memory for platform dev\n", __func__); + return; + } + + samsung_bl_data = s3c_set_platdata(&samsung_dfl_bl_data, + sizeof(struct platform_pwm_backlight_data), samsung_bl_device); + if (!samsung_bl_data) { + printk(KERN_ERR "%s: no memory for platform dev\n", __func__); + goto err_data; + } + + /* Copy board specific data provided by user */ + samsung_bl_data->pwm_id = bl_data->pwm_id; + samsung_bl_device->dev.parent = + &s3c_device_timer[samsung_bl_data->pwm_id].dev; + + if (bl_data->max_brightness) + samsung_bl_data->max_brightness = bl_data->max_brightness; + if (bl_data->dft_brightness) + samsung_bl_data->dft_brightness = bl_data->dft_brightness; + if (bl_data->lth_brightness) + samsung_bl_data->lth_brightness = bl_data->lth_brightness; + if (bl_data->pwm_period_ns) + samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns; + if (bl_data->init) + samsung_bl_data->init = bl_data->init; + if (bl_data->notify) + samsung_bl_data->notify = bl_data->notify; + if (bl_data->exit) + samsung_bl_data->exit = bl_data->exit; + if (bl_data->check_fb) + samsung_bl_data->check_fb = bl_data->check_fb; + + /* Keep the GPIO info for future use */ + s3c_device_timer[samsung_bl_data->pwm_id].dev.platform_data = gpio_info; + + /* Register the specific PWM timer dev for Backlight control */ + ret = platform_device_register( + &s3c_device_timer[samsung_bl_data->pwm_id]); + if (ret) { + printk(KERN_ERR "failed to register pwm timer for backlight: %d\n", ret); + goto err_plat_reg1; + } + + /* Register the Backlight dev */ + ret = platform_device_register(samsung_bl_device); + if (ret) { + printk(KERN_ERR "failed to register backlight device: %d\n", ret); + goto err_plat_reg2; + } + + return; + +err_plat_reg2: + platform_device_unregister(&s3c_device_timer[samsung_bl_data->pwm_id]); +err_plat_reg1: + kfree(samsung_bl_data); +err_data: + kfree(samsung_bl_device); + return; +} diff --git a/arch/arm/plat-samsung/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c index bf60204c629..49a1362fd25 100644 --- a/arch/arm/plat-samsung/dev-fb.c +++ b/arch/arm/plat-samsung/dev-fb.c @@ -58,16 +58,6 @@ struct platform_device s3c_device_fb = { void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd) { - struct s3c_fb_platdata *npd; - - if (!pd) { - printk(KERN_ERR "%s: no platform data\n", __func__); - return; - } - - npd = kmemdup(pd, sizeof(struct s3c_fb_platdata), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - - s3c_device_fb.dev.platform_data = npd; + s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata), + &s3c_device_fb); } diff --git a/arch/arm/plat-samsung/dev-hwmon.c b/arch/arm/plat-samsung/dev-hwmon.c index b3ffb958725..c91a79ce8f3 100644 --- a/arch/arm/plat-samsung/dev-hwmon.c +++ b/arch/arm/plat-samsung/dev-hwmon.c @@ -27,16 +27,6 @@ struct platform_device s3c_device_hwmon = { void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd) { - struct s3c_hwmon_pdata *npd; - - if (!pd) { - printk(KERN_ERR "%s: no platform data\n", __func__); - return; - } - - npd = kmemdup(pd, sizeof(struct s3c_hwmon_pdata), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - - s3c_device_hwmon.dev.platform_data = npd; + s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata), + &s3c_device_hwmon); } diff --git a/arch/arm/plat-samsung/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c index 3a601c16f03..f8251f5098b 100644 --- a/arch/arm/plat-samsung/dev-i2c0.c +++ b/arch/arm/plat-samsung/dev-i2c0.c @@ -48,7 +48,7 @@ struct platform_device s3c_device_i2c0 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data0 __initdata = { +struct s3c2410_platform_i2c default_i2c_data __initdata = { .flags = 0, .slave_addr = 0x10, .frequency = 100*1000, @@ -60,13 +60,11 @@ void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) struct s3c2410_platform_i2c *npd; if (!pd) - pd = &default_i2c_data0; + pd = &default_i2c_data; - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c0_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c0); - s3c_device_i2c0.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c0_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c index 858ee2a0414..3b7c7bec1cf 100644 --- a/arch/arm/plat-samsung/dev-i2c1.c +++ b/arch/arm/plat-samsung/dev-i2c1.c @@ -44,26 +44,18 @@ struct platform_device s3c_device_i2c1 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data1 __initdata = { - .flags = 0, - .bus_num = 1, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) - pd = &default_i2c_data1; + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 1; + } - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c1_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c1); - s3c_device_i2c1.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c1_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-i2c2.c b/arch/arm/plat-samsung/dev-i2c2.c index ff4ba69b683..07e9fd0b1b8 100644 --- a/arch/arm/plat-samsung/dev-i2c2.c +++ b/arch/arm/plat-samsung/dev-i2c2.c @@ -45,26 +45,18 @@ struct platform_device s3c_device_i2c2 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data2 __initdata = { - .flags = 0, - .bus_num = 2, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) - pd = &default_i2c_data2; + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 2; + } - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c2_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c2); - s3c_device_i2c2.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c2_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-i2c3.c b/arch/arm/plat-samsung/dev-i2c3.c index 8586a10014b..d48efa93c6e 100644 --- a/arch/arm/plat-samsung/dev-i2c3.c +++ b/arch/arm/plat-samsung/dev-i2c3.c @@ -43,26 +43,18 @@ struct platform_device s3c_device_i2c3 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data3 __initdata = { - .flags = 0, - .bus_num = 3, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) - pd = &default_i2c_data3; + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 3; + } - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c3_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c3); - s3c_device_i2c3.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c3_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-i2c4.c b/arch/arm/plat-samsung/dev-i2c4.c index df2159e2daa..07e26444efe 100644 --- a/arch/arm/plat-samsung/dev-i2c4.c +++ b/arch/arm/plat-samsung/dev-i2c4.c @@ -43,26 +43,18 @@ struct platform_device s3c_device_i2c4 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data4 __initdata = { - .flags = 0, - .bus_num = 4, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) - pd = &default_i2c_data4; + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 4; + } - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c4_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c4); - s3c_device_i2c4.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c4_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-i2c5.c b/arch/arm/plat-samsung/dev-i2c5.c index 0499c2c3877..f4965578456 100644 --- a/arch/arm/plat-samsung/dev-i2c5.c +++ b/arch/arm/plat-samsung/dev-i2c5.c @@ -43,26 +43,18 @@ struct platform_device s3c_device_i2c5 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data5 __initdata = { - .flags = 0, - .bus_num = 5, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) - pd = &default_i2c_data5; + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 5; + } - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c5_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c5); - s3c_device_i2c5.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c5_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-i2c6.c b/arch/arm/plat-samsung/dev-i2c6.c index 4083108908a..141d799944e 100644 --- a/arch/arm/plat-samsung/dev-i2c6.c +++ b/arch/arm/plat-samsung/dev-i2c6.c @@ -43,26 +43,18 @@ struct platform_device s3c_device_i2c6 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data6 __initdata = { - .flags = 0, - .bus_num = 6, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) - pd = &default_i2c_data6; + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 6; + } - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c6_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c6); - s3c_device_i2c6.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c6_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-i2c7.c b/arch/arm/plat-samsung/dev-i2c7.c index 1182451d7dc..9dddcd1665b 100644 --- a/arch/arm/plat-samsung/dev-i2c7.c +++ b/arch/arm/plat-samsung/dev-i2c7.c @@ -43,26 +43,18 @@ struct platform_device s3c_device_i2c7 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data7 __initdata = { - .flags = 0, - .bus_num = 7, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) - pd = &default_i2c_data7; + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 7; + } - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c7_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c7); - s3c_device_i2c7.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c7_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c index 6927ae8fd11..b8e30ec6ac2 100644 --- a/arch/arm/plat-samsung/dev-nand.c +++ b/arch/arm/plat-samsung/dev-nand.c @@ -91,11 +91,10 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) * time then there is little chance the system is going to run. */ - npd = kmemdup(nand, sizeof(struct s3c2410_platform_nand), GFP_KERNEL); - if (!npd) { - printk(KERN_ERR "%s: failed copying platform data\n", __func__); + npd = s3c_set_platdata(nand, sizeof(struct s3c2410_platform_nand), + &s3c_device_nand); + if (!npd) return; - } /* now see if we need to copy any of the nand set data */ @@ -123,6 +122,4 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) to++; } } - - s3c_device_nand.dev.platform_data = npd; } diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c index 3e4bd8147bf..82543f0248a 100644 --- a/arch/arm/plat-samsung/dev-ts.c +++ b/arch/arm/plat-samsung/dev-ts.c @@ -45,16 +45,6 @@ struct platform_device s3c_device_ts = { void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) { - struct s3c2410_ts_mach_info *npd; - - if (!pd) { - printk(KERN_ERR "%s: no platform data\n", __func__); - return; - } - - npd = kmemdup(pd, sizeof(struct s3c2410_ts_mach_info), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - - s3c_device_ts.dev.platform_data = npd; + s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info), + &s3c_device_ts); } diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c index 0e0a3bf5c98..33fbaa96770 100644 --- a/arch/arm/plat-samsung/dev-usb.c +++ b/arch/arm/plat-samsung/dev-usb.c @@ -60,11 +60,6 @@ EXPORT_SYMBOL(s3c_device_ohci); */ void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info) { - struct s3c2410_hcd_info *npd; - - npd = kmemdup(info, sizeof(struct s3c2410_hcd_info), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - - s3c_device_ohci.dev.platform_data = npd; + s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info), + &s3c_device_ohci); } diff --git a/arch/arm/plat-samsung/dma.c b/arch/arm/plat-samsung/dma.c index cb459dd9545..6143aa14768 100644 --- a/arch/arm/plat-samsung/dma.c +++ b/arch/arm/plat-samsung/dma.c @@ -41,7 +41,7 @@ struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel) * irq? */ -int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) +int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -56,7 +56,7 @@ int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) } EXPORT_SYMBOL(s3c2410_dma_set_opfn); -int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) +int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -71,7 +71,7 @@ int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) } EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); -int s3c2410_dma_setflags(unsigned int channel, unsigned int flags) +int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h index a0826ed2f9f..aa9875f77c4 100644 --- a/arch/arm/plat-samsung/include/plat/audio.h +++ b/arch/arm/plat-samsung/include/plat/audio.h @@ -44,6 +44,7 @@ struct samsung_i2s { * Also corresponds to clocks of I2SMOD[10] */ const char **src_clk; + dma_addr_t idma_addr; }; /** diff --git a/arch/arm/plat-samsung/include/plat/backlight.h b/arch/arm/plat-samsung/include/plat/backlight.h new file mode 100644 index 00000000000..ad530c78fe8 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/backlight.h @@ -0,0 +1,26 @@ +/* linux/arch/arm/plat-samsung/include/plat/backlight.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_PLAT_BACKLIGHT_H +#define __ASM_PLAT_BACKLIGHT_H __FILE__ + +/* samsung_bl_gpio_info - GPIO info for PWM Backlight control + * @no: GPIO number for PWM timer out + * @func: Special function of GPIO line for PWM timer + */ +struct samsung_bl_gpio_info { + int no; + int func; +}; + +extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, + struct platform_pwm_backlight_data *bl_data); + +#endif /* __ASM_PLAT_BACKLIGHT_H */ diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 983c578b827..87d5b38a86f 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -10,6 +10,7 @@ */ #include <linux/spinlock.h> +#include <linux/clkdev.h> struct clk; @@ -40,6 +41,7 @@ struct clk { struct module *owner; struct clk *parent; const char *name; + const char *devname; int id; int usage; unsigned long rate; @@ -47,6 +49,7 @@ struct clk { struct clk_ops *ops; int (*enable)(struct clk *, int enable); + struct clk_lookup lookup; #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) struct dentry *dent; /* For visible tree hierarchy */ #endif diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 4af108ff411..24ebb1e1de4 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -12,6 +12,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#ifndef __PLAT_DEVS_H +#define __PLAT_DEVS_H __FILE__ + #include <linux/platform_device.h> struct s3c24xx_uart_resources { @@ -36,6 +40,7 @@ extern struct platform_device s3c64xx_device_spi0; extern struct platform_device s3c64xx_device_spi1; extern struct platform_device samsung_asoc_dma; +extern struct platform_device samsung_asoc_idma; extern struct platform_device s3c64xx_device_pcm0; extern struct platform_device s3c64xx_device_pcm1; @@ -45,6 +50,7 @@ extern struct platform_device s3c64xx_device_ac97; extern struct platform_device s3c_device_ts; extern struct platform_device s3c_device_fb; +extern struct platform_device s5p_device_fimd0; extern struct platform_device s3c_device_ohci; extern struct platform_device s3c_device_lcd; extern struct platform_device s3c_device_wdt; @@ -108,6 +114,7 @@ extern struct platform_device exynos4_device_i2s2; extern struct platform_device exynos4_device_spdif; extern struct platform_device exynos4_device_pd[]; extern struct platform_device exynos4_device_ahci; +extern struct platform_device exynos4_device_dwmci; extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; @@ -132,6 +139,9 @@ extern struct platform_device s5p_device_fimc1; extern struct platform_device s5p_device_fimc2; extern struct platform_device s5p_device_fimc3; +extern struct platform_device s5p_device_mfc; +extern struct platform_device s5p_device_mfc_l; +extern struct platform_device s5p_device_mfc_r; extern struct platform_device s5p_device_mipi_csis0; extern struct platform_device s5p_device_mipi_csis1; @@ -159,3 +169,5 @@ extern struct platform_device s3c_device_ac97; */ extern void *s3c_set_platdata(void *pd, size_t pdsize, struct platform_device *pdev); + +#endif /* __PLAT_DEVS_H */ diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h index 2e8f8c6560d..8c273b7a6f5 100644 --- a/arch/arm/plat-samsung/include/plat/dma.h +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -42,6 +42,7 @@ struct s3c2410_dma_client { }; struct s3c2410_dma_chan; +enum dma_ch; /* s3c2410_dma_cbfn_t * @@ -62,7 +63,7 @@ typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, * request a dma channel exclusivley */ -extern int s3c2410_dma_request(unsigned int channel, +extern int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *, void *dev); @@ -71,14 +72,14 @@ extern int s3c2410_dma_request(unsigned int channel, * change the state of the dma channel */ -extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op); +extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op); /* s3c2410_dma_setflags * * set the channel's flags to a given state */ -extern int s3c2410_dma_setflags(unsigned int channel, +extern int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags); /* s3c2410_dma_free @@ -86,7 +87,7 @@ extern int s3c2410_dma_setflags(unsigned int channel, * free the dma channel (will also abort any outstanding operations) */ -extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); +extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *); /* s3c2410_dma_enqueue * @@ -95,7 +96,7 @@ extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); * drained before the buffer is given to the DMA system. */ -extern int s3c2410_dma_enqueue(unsigned int channel, void *id, +extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size); /* s3c2410_dma_config @@ -103,14 +104,14 @@ extern int s3c2410_dma_enqueue(unsigned int channel, void *id, * configure the dma channel */ -extern int s3c2410_dma_config(unsigned int channel, int xferunit); +extern int s3c2410_dma_config(enum dma_ch channel, int xferunit); /* s3c2410_dma_devconfig * * configure the device we're talking to */ -extern int s3c2410_dma_devconfig(unsigned int channel, +extern int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr); /* s3c2410_dma_getposition @@ -118,10 +119,10 @@ extern int s3c2410_dma_devconfig(unsigned int channel, * get the position that the dma transfer is currently at */ -extern int s3c2410_dma_getposition(unsigned int channel, +extern int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dest); -extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn); -extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn); +extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn); +extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn); diff --git a/arch/arm/plat-samsung/include/plat/fb-core.h b/arch/arm/plat-samsung/include/plat/fb-core.h index bca383efcf6..6abcbf139ce 100644 --- a/arch/arm/plat-samsung/include/plat/fb-core.h +++ b/arch/arm/plat-samsung/include/plat/fb-core.h @@ -26,4 +26,19 @@ static inline void s3c_fb_setname(char *name) #endif } +/* Re-define device name depending on support. */ +static inline void s5p_fb_setname(int id, char *name) +{ + switch (id) { +#ifdef CONFIG_S5P_DEV_FIMD0 + case 0: + s5p_device_fimd0.name = name; + break; +#endif + default: + printk(KERN_ERR "%s: invalid device id(%d)\n", __func__, id); + break; + } +} + #endif /* __ASM_PLAT_FB_CORE_H */ diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index cb3ca3adc68..01f10e4d00c 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -74,6 +74,14 @@ struct s3c_fb_platdata { extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd); /** + * s5p_fimd0_set_platdata() - Setup the FB device with platform data. + * @pd: The platform data to set. The data is copied from the passed structure + * so the machine data can mark the data __initdata so that any unused + * machines will end up dumping their data at runtime. + */ +extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd); + +/** * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD * * Initialise the GPIO for an 24bpp LCD display on the RGB interface. @@ -94,4 +102,11 @@ extern void s5pc100_fb_gpio_setup_24bpp(void); */ extern void s5pv210_fb_gpio_setup_24bpp(void); +/** + * exynos4_fimd0_gpio_setup_24bpp() - Exynos4 setup function for 24bpp LCD0 + * + * Initialise the GPIO for an 24bpp LCD display on the RGB interface 0. + */ +extern void exynos4_fimd0_gpio_setup_24bpp(void); + #endif /* __PLAT_S3C_FB_H */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 3ad8386599c..9a4e53d5296 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -140,7 +140,7 @@ extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, /* Pull-{up,down} resistor controls. * - * S3C2410,S3C2440,S3C24A0 = Pull-UP, + * S3C2410,S3C2440 = Pull-UP, * S3C2412,S3C2413 = Pull-Down * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef] * S3C2443 = Pull-Both [not same as S3C6400] diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h index 1543da8f85c..56b0059439e 100644 --- a/arch/arm/plat-samsung/include/plat/iic.h +++ b/arch/arm/plat-samsung/include/plat/iic.h @@ -71,4 +71,6 @@ extern void s3c_i2c5_cfg_gpio(struct platform_device *dev); extern void s3c_i2c6_cfg_gpio(struct platform_device *dev); extern void s3c_i2c7_cfg_gpio(struct platform_device *dev); +extern struct s3c2410_platform_i2c default_i2c_data; + #endif /* __ASM_ARCH_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 7fb6f6be8c8..f6749916d19 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -42,7 +42,7 @@ extern unsigned long s3c_irqwake_eintallow; /* per-cpu sleep functions */ extern void (*pm_cpu_prep)(void); -extern void (*pm_cpu_sleep)(void); +extern int (*pm_cpu_sleep)(unsigned long); /* Flags for PM Control */ @@ -52,10 +52,9 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */ /* from sleep.S */ -extern int s3c_cpu_save(unsigned long *saveblk, long); extern void s3c_cpu_resume(void); -extern void s3c2410_cpu_suspend(void); +extern int s3c2410_cpu_suspend(unsigned long); /* sleep save info */ diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h index 7554c4fcddb..035e8c38d69 100644 --- a/arch/arm/plat-samsung/include/plat/regs-adc.h +++ b/arch/arm/plat-samsung/include/plat/regs-adc.h @@ -21,6 +21,7 @@ #define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10) #define S3C64XX_ADCUPDN S3C2410_ADCREG(0x14) #define S3C64XX_ADCCLRINT S3C2410_ADCREG(0x18) +#define S5P_ADCMUX S3C2410_ADCREG(0x1C) #define S3C64XX_ADCCLRINTPNDNUP S3C2410_ADCREG(0x20) diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index c151c5f94a8..bac36fa3bec 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -155,14 +155,6 @@ #define S3C2410_UFSTAT_RXMASK (15<<0) #define S3C2410_UFSTAT_RXSHIFT (0) -/* UFSTAT S3C24A0 */ -#define S3C24A0_UFSTAT_TXFULL (1 << 14) -#define S3C24A0_UFSTAT_RXFULL (1 << 6) -#define S3C24A0_UFSTAT_TXMASK (63 << 8) -#define S3C24A0_UFSTAT_TXSHIFT (8) -#define S3C24A0_UFSTAT_RXMASK (63) -#define S3C24A0_UFSTAT_RXSHIFT (0) - /* UFSTAT S3C2443 same as S3C2440 */ #define S3C2440_UFSTAT_TXFULL (1<<14) #define S3C2440_UFSTAT_RXFULL (1<<6) @@ -224,6 +216,8 @@ #define S5PV210_UFSTAT_RXMASK (255<<0) #define S5PV210_UFSTAT_RXSHIFT (0) +#define NO_NEED_CHECK_CLKSRC 1 + #ifndef __ASSEMBLY__ /* struct s3c24xx_uart_clksrc diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index 0ffe34a2155..4c16fa3621b 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -39,6 +39,7 @@ struct s3c64xx_spi_csinfo { * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number * @high_speed: If the controller supports HIGH_SPEED_EN bit + * @tx_st_done: Depends on tx fifo_lvl field */ struct s3c64xx_spi_info { int src_clk_nr; @@ -53,6 +54,7 @@ struct s3c64xx_spi_info { int fifo_lvl_mask; int rx_lvl_offset; int high_speed; + int tx_st_done; }; /** diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c index 32582c0958e..3014c7226bd 100644 --- a/arch/arm/plat-samsung/irq-uart.c +++ b/arch/arm/plat-samsung/irq-uart.c @@ -19,6 +19,8 @@ #include <linux/irq.h> #include <linux/io.h> +#include <asm/mach/irq.h> + #include <mach/map.h> #include <plat/irq-uart.h> #include <plat/regs-serial.h> @@ -30,9 +32,12 @@ static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) { struct s3c_uart_irq *uirq = desc->irq_data.handler_data; + struct irq_chip *chip = irq_get_chip(irq); u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); int base = uirq->base_irq; + chained_irq_enter(chip, desc); + if (pend & (1 << 0)) generic_handle_irq(base); if (pend & (1 << 1)) @@ -41,6 +46,8 @@ static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) generic_handle_irq(base + 2); if (pend & (1 << 3)) generic_handle_irq(base + 3); + + chained_irq_exit(chip, desc); } static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) @@ -54,8 +61,15 @@ static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base, handle_level_irq); + + if (!gc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n", + __func__, uirq->base_irq); + return; + } + ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->regs.ack = S3C64XX_UINTP; diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index a607546ddbd..51583cd3016 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -22,9 +22,14 @@ #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> +#include <asm/mach/irq.h> + static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); generic_handle_irq((int)desc->irq_data.handler_data); + chained_irq_exit(chip, desc); } /* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ @@ -54,6 +59,13 @@ void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq) s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq, S3C64XX_TINT_CSTAT, handle_level_irq); + + if (!s3c_tgc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n", + __func__, timer_irq); + return; + } + ct = s3c_tgc->chip_types; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index 6b733fafe7c..3cbd62666b1 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -72,7 +72,7 @@ static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg) static u32 *s3c_pm_countram(struct resource *res, u32 *val) { - u32 size = (u32)(res->end - res->start)+1; + u32 size = (u32)resource_size(res); size += CHECK_CHUNKSIZE-1; size /= CHECK_CHUNKSIZE; diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 5c0a440d6e1..ae6f99834cd 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -20,6 +20,7 @@ #include <linux/io.h> #include <asm/cacheflush.h> +#include <asm/suspend.h> #include <mach/hardware.h> #include <mach/map.h> @@ -231,7 +232,7 @@ static void __maybe_unused s3c_pm_show_resume_irqs(int start, void (*pm_cpu_prep)(void); -void (*pm_cpu_sleep)(void); +int (*pm_cpu_sleep)(unsigned long); #define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) @@ -268,6 +269,7 @@ static int s3c_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ s3c_pm_save_gpios(); + s3c_pm_saved_gpios(); s3c_pm_save_uarts(); s3c_pm_save_core(); @@ -294,21 +296,18 @@ static int s3c_pm_enter(suspend_state_t state) s3c_pm_arch_stop_clocks(); - /* s3c_cpu_save will also act as our return point from when + /* this will also act as our return point from when * we resume as it saves its own register state and restores it * during the resume. */ - s3c_cpu_save(0, PLAT_PHYS_OFFSET - PAGE_OFFSET); - - /* restore the cpu state using the kernel's cpu init code. */ - - cpu_init(); + cpu_suspend(0, pm_cpu_sleep); /* restore the system state */ s3c_pm_restore_core(); s3c_pm_restore_uarts(); s3c_pm_restore_gpios(); + s3c_pm_restored_gpios(); s3c_pm_debug_init(); diff --git a/arch/arm/plat-samsung/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c index 46c9381e083..f1bba88ed2f 100644 --- a/arch/arm/plat-samsung/pwm-clock.c +++ b/arch/arm/plat-samsung/pwm-clock.c @@ -268,6 +268,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = { [0] = { .clk = { .name = "pwm-tdiv", + .devname = "s3c24xx-pwm.0", .ops = &clk_tdiv_ops, .parent = &clk_timer_scaler[0], }, @@ -275,6 +276,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = { [1] = { .clk = { .name = "pwm-tdiv", + .devname = "s3c24xx-pwm.1", .ops = &clk_tdiv_ops, .parent = &clk_timer_scaler[0], } @@ -282,6 +284,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = { [2] = { .clk = { .name = "pwm-tdiv", + .devname = "s3c24xx-pwm.2", .ops = &clk_tdiv_ops, .parent = &clk_timer_scaler[1], }, @@ -289,6 +292,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = { [3] = { .clk = { .name = "pwm-tdiv", + .devname = "s3c24xx-pwm.3", .ops = &clk_tdiv_ops, .parent = &clk_timer_scaler[1], }, @@ -296,6 +300,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = { [4] = { .clk = { .name = "pwm-tdiv", + .devname = "s3c24xx-pwm.4", .ops = &clk_tdiv_ops, .parent = &clk_timer_scaler[1], }, @@ -361,26 +366,31 @@ static struct clk_ops clk_tin_ops = { static struct clk clk_tin[] = { [0] = { .name = "pwm-tin", + .devname = "s3c24xx-pwm.0", .id = 0, .ops = &clk_tin_ops, }, [1] = { .name = "pwm-tin", + .devname = "s3c24xx-pwm.1", .id = 1, .ops = &clk_tin_ops, }, [2] = { .name = "pwm-tin", + .devname = "s3c24xx-pwm.2", .id = 2, .ops = &clk_tin_ops, }, [3] = { .name = "pwm-tin", + .devname = "s3c24xx-pwm.3", .id = 3, .ops = &clk_tin_ops, }, [4] = { .name = "pwm-tin", + .devname = "s3c24xx-pwm.4", .id = 4, .ops = &clk_tin_ops, }, diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c index 2231d80ad81..e3bb806bbaf 100644 --- a/arch/arm/plat-samsung/time.c +++ b/arch/arm/plat-samsung/time.c @@ -259,6 +259,8 @@ static void __init s3c2410_timer_resources(void) clk_enable(timerclk); if (!use_tclk1_12()) { + tmpdev.id = 4; + tmpdev.dev.init_name = "s3c24xx-pwm.4"; tin = clk_get(&tmpdev.dev, "pwm-tin"); if (IS_ERR(tin)) panic("failed to get pwm-tin clock for system timer"); |