diff options
Diffstat (limited to 'arch/arm/plat-samsung')
26 files changed, 1977 insertions, 107 deletions
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index d552c65fa1b..229919e9744 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -90,12 +90,6 @@ config S3C_GPIO_CFG_S3C64XX Internal configuration to enable S3C64XX style GPIO configuration functions. -config S5P_GPIO_CFG_S5PC1XX - bool - help - Internal configuration to enable S5PC1XX style GPIO configuration - functions. - config S3C_GPIO_PULL_UPDOWN bool help @@ -111,6 +105,12 @@ config S3C_GPIO_PULL_UP help Internal configuration to enable the correct GPIO pull helper +config S5P_GPIO_DRVSTR + bool + help + Internal configuration to get and set correct GPIO driver strength + helper + config SAMSUNG_GPIO_EXTRA int "Number of additional GPIO pins" default 0 @@ -160,6 +160,11 @@ config S3C_DEV_HSMMC2 help Compile in platform device definitions for HSMMC channel 2 +config S3C_DEV_HWMON + bool + help + Compile in platform device definitions for HWMON + config S3C_DEV_I2C1 bool help @@ -185,12 +190,27 @@ config S3C_DEV_NAND help Compile in platform device definition for NAND controller +config S3C_DEV_RTC + bool + help + Complie in platform device definition for RTC + +config SAMSUNG_DEV_ADC + bool + help + Compile in platform device definition for ADC controller + config S3C64XX_DEV_SPI bool help Compile in platform device definitions for S3C64XX's type SPI controllers. +config SAMSUNG_DEV_TS + bool + help + Common in platform device definitions for touchscreen device + # DMA config S3C_DMA @@ -198,6 +218,12 @@ config S3C_DMA help Internal configuration for S3C DMA core +config S3C_PL330_DMA + bool + select PL330 + help + S3C DMA API Driver for PL330 DMAC. + comment "Power management" config SAMSUNG_PM_DEBUG diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 22c89d08f6e..48288499a3b 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o +obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o @@ -40,11 +41,17 @@ obj-y += dev-uart.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o +obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o + +obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o +obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o # DMA support obj-$(CONFIG_S3C_DMA) += dma.o +obj-$(CONFIG_S3C_PL330_DMA) += s3c-pl330.o + # PM support obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 1b25c9d8c40..8bf79f3efdf 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -376,6 +376,21 @@ void __init s3c_register_clocks(struct clk *clkp, int nr_clks) } } +/** + * s3c_disable_clocks() - disable an array of clocks + * @clkp: Pointer to the first clock in the array. + * @nr_clks: Number of clocks to register. + * + * for internal use only at initialisation time. disable the clocks in the + * @clkp array. + */ + +void __init s3c_disable_clocks(struct clk *clkp, int nr_clks) +{ + for (; nr_clks > 0; nr_clks--, clkp++) + (clkp->enable)(clkp, 0); +} + /* initalise all the clocks */ int __init s3c24xx_register_baseclocks(unsigned long xtal) diff --git a/arch/arm/plat-samsung/dev-adc.c b/arch/arm/plat-samsung/dev-adc.c new file mode 100644 index 00000000000..9d903d4095e --- /dev/null +++ b/arch/arm/plat-samsung/dev-adc.c @@ -0,0 +1,46 @@ +/* linux/arch/arm/plat-samsung/dev-adc.c + * + * Copyright 2010 Maurus Cuelenaere + * + * S3C64xx series device definition for ADC device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/adc.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_adc_resource[] = { + [0] = { + .start = SAMSUNG_PA_ADC, + .end = SAMSUNG_PA_ADC + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TC, + .end = IRQ_TC, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_ADC, + .end = IRQ_ADC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_adc = { + .name = "samsung-adc", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_adc_resource), + .resource = s3c_adc_resource, +}; diff --git a/arch/arm/plat-samsung/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c index 002a15f313f..bf60204c629 100644 --- a/arch/arm/plat-samsung/dev-fb.c +++ b/arch/arm/plat-samsung/dev-fb.c @@ -19,7 +19,6 @@ #include <mach/irqs.h> #include <mach/map.h> -#include <mach/regs-fb.h> #include <plat/fb.h> #include <plat/devs.h> diff --git a/arch/arm/plat-samsung/dev-hwmon.c b/arch/arm/plat-samsung/dev-hwmon.c new file mode 100644 index 00000000000..b3ffb958725 --- /dev/null +++ b/arch/arm/plat-samsung/dev-hwmon.c @@ -0,0 +1,42 @@ +/* linux/arch/arm/plat-samsung/dev-hwmon.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Adapted for HWMON by Maurus Cuelenaere + * + * Samsung series device definition for HWMON + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <plat/devs.h> +#include <plat/hwmon.h> + +struct platform_device s3c_device_hwmon = { + .name = "s3c-hwmon", + .id = -1, + .dev.parent = &s3c_device_adc.dev, +}; + +void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd) +{ + struct s3c_hwmon_pdata *npd; + + if (!pd) { + printk(KERN_ERR "%s: no platform data\n", __func__); + return; + } + + npd = kmemdup(pd, sizeof(struct s3c_hwmon_pdata), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + + s3c_device_hwmon.dev.platform_data = npd; +} diff --git a/arch/arm/plat-samsung/dev-rtc.c b/arch/arm/plat-samsung/dev-rtc.c new file mode 100644 index 00000000000..bf4e2267333 --- /dev/null +++ b/arch/arm/plat-samsung/dev-rtc.c @@ -0,0 +1,43 @@ +/* linux/arch/arm/plat-samsung/dev-rtc.c + * + * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/devs.h> + +static struct resource s3c_rtc_resource[] = { + [0] = { + .start = S3C_PA_RTC, + .end = S3C_PA_RTC + 0xff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_RTC_ALARM, + .end = IRQ_RTC_ALARM, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_RTC_TIC, + .end = IRQ_RTC_TIC, + .flags = IORESOURCE_IRQ + } +}; + +struct platform_device s3c_device_rtc = { + .name = "s3c64xx-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_rtc_resource), + .resource = s3c_rtc_resource, +}; +EXPORT_SYMBOL(s3c_device_rtc); diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c new file mode 100644 index 00000000000..236ef8427d7 --- /dev/null +++ b/arch/arm/plat-samsung/dev-ts.c @@ -0,0 +1,61 @@ +/* linux/arch/arm/mach-s3c64xx/dev-ts.c + * + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> + * + * Adapted by Maurus Cuelenaere for s3c64xx + * + * S3C64XX series device definition for touchscreen device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/devs.h> +#include <plat/ts.h> + +static struct resource s3c_ts_resource[] = { + [0] = { + .start = SAMSUNG_PA_ADC, + .end = SAMSUNG_PA_ADC + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TC, + .end = IRQ_TC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_ts = { + .name = "s3c64xx-ts", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_ts_resource), + .resource = s3c_ts_resource, +}; + +void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) +{ + struct s3c2410_ts_mach_info *npd; + + if (!pd) { + printk(KERN_ERR "%s: no platform data\n", __func__); + return; + } + + npd = kmemdup(pd, sizeof(struct s3c2410_ts_mach_info), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + + s3c_device_ts.dev.platform_data = npd; +} +EXPORT_SYMBOL(s3c24xx_ts_set_platdata); diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index 44a84e89654..57b68a50f45 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s3c/gpio-config.c * * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics + * Copyright 2008-2010 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * @@ -33,14 +33,34 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) offset = pin - chip->chip.base; - local_irq_save(flags); + s3c_gpio_lock(chip, flags); ret = s3c_gpio_do_setcfg(chip, offset, config); - local_irq_restore(flags); + s3c_gpio_unlock(chip, flags); return ret; } EXPORT_SYMBOL(s3c_gpio_cfgpin); +unsigned s3c_gpio_getcfg(unsigned int pin) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long flags; + unsigned ret = 0; + int offset; + + if (chip) { + offset = pin - chip->chip.base; + + s3c_gpio_lock(chip, flags); + ret = s3c_gpio_do_getcfg(chip, offset); + s3c_gpio_unlock(chip, flags); + } + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_getcfg); + + int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) { struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); @@ -52,17 +72,17 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) offset = pin - chip->chip.base; - local_irq_save(flags); + s3c_gpio_lock(chip, flags); ret = s3c_gpio_do_setpull(chip, offset, pull); - local_irq_restore(flags); + s3c_gpio_unlock(chip, flags); return ret; } EXPORT_SYMBOL(s3c_gpio_setpull); #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX -int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) +int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) { void __iomem *reg = chip->base; unsigned int shift = off; @@ -87,6 +107,19 @@ int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, return 0; } +unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off; + con &= 1; + con++; + + return S3C_GPIO_SFN(con); +} + int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg) { @@ -109,6 +142,19 @@ int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, return 0; } + +unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off * 2; + con &= 3; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} #endif #ifdef CONFIG_S3C_GPIO_CFG_S3C64XX @@ -134,6 +180,25 @@ int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, return 0; } + +unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio > 8) + reg -= 4; + + con = __raw_readl(reg); + con >>= shift; + con &= 0xf; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} + #endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */ #ifdef CONFIG_S3C_GPIO_PULL_UPDOWN @@ -164,3 +229,83 @@ s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, return (__force s3c_gpio_pull_t)pup; } #endif + +#ifdef CONFIG_S3C_GPIO_PULL_UP +int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + pup = __raw_readl(reg); + + if (pup == S3C_GPIO_PULL_UP) + pup &= ~(1 << off); + else if (pup == S3C_GPIO_PULL_NONE) + pup |= (1 << off); + else + return -EINVAL; + + __raw_writel(pup, reg); + return 0; +} + +s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + pup &= (1 << off); + return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP; +} +#endif /* CONFIG_S3C_GPIO_PULL_UP */ + +#ifdef CONFIG_S5P_GPIO_DRVSTR +s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned int off; + void __iomem *reg; + int shift; + u32 drvstr; + + if (!chip) + return -EINVAL; + + off = chip->chip.base - pin; + shift = off * 2; + reg = chip->base + 0x0C; + + drvstr = __raw_readl(reg); + drvstr = 0xffff & (0x3 << shift); + drvstr = drvstr >> shift; + + return (__force s5p_gpio_drvstr_t)drvstr; +} +EXPORT_SYMBOL(s5p_gpio_get_drvstr); + +int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned int off; + void __iomem *reg; + int shift; + u32 tmp; + + if (!chip) + return -EINVAL; + + off = chip->chip.base - pin; + shift = off * 2; + reg = chip->base + 0x0C; + + tmp = __raw_readl(reg); + tmp |= drvstr << shift; + + __raw_writel(tmp, reg); + + return 0; +} +EXPORT_SYMBOL(s5p_gpio_set_drvstr); +#endif /* CONFIG_S5P_GPIO_DRVSTR */ diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c index 28d2ab8a08d..b83a83351ce 100644 --- a/arch/arm/plat-samsung/gpio.c +++ b/arch/arm/plat-samsung/gpio.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/spinlock.h> #include <plat/gpio-core.h> @@ -52,14 +53,14 @@ static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset) unsigned long flags; unsigned long con; - local_irq_save(flags); + s3c_gpio_lock(ourchip, flags); con = __raw_readl(base + 0x00); con &= ~(3 << (offset * 2)); __raw_writel(con, base + 0x00); - local_irq_restore(flags); + s3c_gpio_unlock(ourchip, flags); return 0; } @@ -72,7 +73,7 @@ static int s3c_gpiolib_output(struct gpio_chip *chip, unsigned long dat; unsigned long con; - local_irq_save(flags); + s3c_gpio_lock(ourchip, flags); dat = __raw_readl(base + 0x04); dat &= ~(1 << offset); @@ -87,7 +88,7 @@ static int s3c_gpiolib_output(struct gpio_chip *chip, __raw_writel(con, base + 0x00); __raw_writel(dat, base + 0x04); - local_irq_restore(flags); + s3c_gpio_unlock(ourchip, flags); return 0; } @@ -99,7 +100,7 @@ static void s3c_gpiolib_set(struct gpio_chip *chip, unsigned long flags; unsigned long dat; - local_irq_save(flags); + s3c_gpio_lock(ourchip, flags); dat = __raw_readl(base + 0x04); dat &= ~(1 << offset); @@ -107,7 +108,7 @@ static void s3c_gpiolib_set(struct gpio_chip *chip, dat |= 1 << offset; __raw_writel(dat, base + 0x04); - local_irq_restore(flags); + s3c_gpio_unlock(ourchip, flags); } static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset) @@ -131,6 +132,8 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) BUG_ON(!gc->label); BUG_ON(!gc->ngpio); + spin_lock_init(&chip->lock); + if (!gc->direction_input) gc->direction_input = s3c_gpiolib_input; if (!gc->direction_output) diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 60b62692ac7..0fbcd0effd8 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -74,6 +74,7 @@ extern struct clk clk_ext; extern struct clk clk_h2; extern struct clk clk_27m; extern struct clk clk_48m; +extern struct clk clk_xusbxti; extern int clk_default_setrate(struct clk *clk, unsigned long rate); extern struct clk_ops clk_ops_def_setrate; @@ -91,6 +92,7 @@ extern int s3c24xx_register_clock(struct clk *clk); extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); extern void s3c_register_clocks(struct clk *clk, int nr_clks); +extern void s3c_disable_clocks(struct clk *clkp, int nr_clks); extern int s3c24xx_register_baseclocks(unsigned long xtal); diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index d316b4a579f..6412933d6fb 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -73,11 +73,15 @@ extern struct sys_timer s3c24xx_timer; extern struct sysdev_class s3c2410_sysclass; extern struct sysdev_class s3c2410a_sysclass; extern struct sysdev_class s3c2412_sysclass; +extern struct sysdev_class s3c2416_sysclass; extern struct sysdev_class s3c2440_sysclass; extern struct sysdev_class s3c2442_sysclass; extern struct sysdev_class s3c2443_sysclass; extern struct sysdev_class s3c6410_sysclass; extern struct sysdev_class s3c64xx_sysclass; +extern struct sysdev_class s5p6440_sysclass; +extern struct sysdev_class s5p6442_sysclass; +extern struct sysdev_class s5pv210_sysclass; extern void (*s5pc1xx_idle)(void); diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 796d2425831..ef69e56b288 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -64,6 +64,22 @@ extern struct platform_device s3c_device_nand; extern struct platform_device s3c_device_usbgadget; extern struct platform_device s3c_device_usb_hsotg; +extern struct platform_device s5pv210_device_ac97; +extern struct platform_device s5pv210_device_pcm0; +extern struct platform_device s5pv210_device_pcm1; +extern struct platform_device s5pv210_device_pcm2; +extern struct platform_device s5pv210_device_iis0; +extern struct platform_device s5pv210_device_iis1; +extern struct platform_device s5pv210_device_iis2; + +extern struct platform_device s5p6442_device_pcm0; +extern struct platform_device s5p6442_device_pcm1; +extern struct platform_device s5p6442_device_iis0; +extern struct platform_device s5p6442_device_iis1; + +extern struct platform_device s5p6440_device_pcm; +extern struct platform_device s5p6440_device_iis; + /* s3c2440 specific devices */ #ifdef CONFIG_CPU_S3C2440 diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h index 7584d751ed5..2e8f8c6560d 100644 --- a/arch/arm/plat-samsung/include/plat/dma.h +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -110,8 +110,8 @@ extern int s3c2410_dma_config(unsigned int channel, int xferunit); * configure the device we're talking to */ -extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source, - unsigned long devaddr); +extern int s3c2410_dma_devconfig(unsigned int channel, + enum s3c2410_dmasrc source, unsigned long devaddr); /* s3c2410_dma_getposition * diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index ffc01a76b7c..1f85649d8c1 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -15,6 +15,13 @@ #ifndef __PLAT_S3C_FB_H #define __PLAT_S3C_FB_H __FILE__ +/* S3C_FB_MAX_WIN + * Set to the maximum number of windows that any of the supported hardware + * can use. Since the platform data uses this for an array size, having it + * set to the maximum of any version of the hardware can do is safe. + */ +#define S3C_FB_MAX_WIN (5) + /** * struct s3c_fb_pd_win - per window setup data * @win_mode: The display parameters to initialise (not for window 0) diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index dda19da037a..3e21c75feef 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -30,6 +30,12 @@ static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip, return (chip->config->set_config)(chip, off, config); } +static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip, + unsigned int off) +{ + return (chip->config->get_config)(chip, off); +} + static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, unsigned int off, s3c_gpio_pull_t pull) { @@ -53,6 +59,18 @@ extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); /** + * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg + * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the + * S3C_GPIO_SPECIAL() macro. + */ +unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off); + +/** * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A) * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. @@ -65,6 +83,21 @@ extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable + * GPIO configuration value. + * + * @sa s3c_gpio_getcfg_s3c24xx + * @sa s3c_gpio_getcfg_s3c64xx_4bit + */ +extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off); + /** * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config. * @chip: The gpio chip that is being configured. @@ -85,6 +118,20 @@ extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); +/** + * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration + * register setting into a value the software can use, such as could be passed + * to s3c_gpio_setcfg_s3c64xx_4bit(). + * + * @sa s3c_gpio_getcfg_s3c24xx + */ +extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off); + /* Pull-{up,down} resistor controls. * * S3C2410,S3C2440,S3C24A0 = Pull-UP, @@ -146,6 +193,17 @@ extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, unsigned int off); /** + * s3c_gpio_getpull_1up() - Get configuration for choice of up or none + * @chip: The gpio chip that the GPIO pin belongs to + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-up resistor for the + * given GPIO in the same case as s3c_gpio_setpull_1up. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, + unsigned int off); + +/** * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 29cd6a86cad..34efdd2b032 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -25,6 +25,7 @@ #define __PLAT_GPIO_CFG_H __FILE__ typedef unsigned int __bitwise__ s3c_gpio_pull_t; +typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; /* forward declaration if gpio-core.h hasn't been included */ struct s3c_gpio_chip; @@ -77,6 +78,17 @@ struct s3c_gpio_cfg { */ extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to); +/** + * s3c_gpio_getcfg - Read the current function for a GPIO pin + * @pin: The pin to read the configuration value for. + * + * Read the configuration state of the given @pin, returning a value that + * could be passed back to s3c_gpio_cfgpin(). + * + * @sa s3c_gpio_cfgpin + */ +extern unsigned s3c_gpio_getcfg(unsigned int pin); + /* Define values for the pull-{up,down} available for each gpio pin. * * These values control the state of the weak pull-{up,down} resistors @@ -107,4 +119,33 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); */ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); +/* Define values for the drvstr available for each gpio pin. + * + * These values control the value of the output signal driver strength, + * configurable on most pins on the S5C series. + */ +#define S5P_GPIO_DRVSTR_LV1 ((__force s5p_gpio_drvstr_t)0x00) +#define S5P_GPIO_DRVSTR_LV2 ((__force s5p_gpio_drvstr_t)0x01) +#define S5P_GPIO_DRVSTR_LV3 ((__force s5p_gpio_drvstr_t)0x10) +#define S5P_GPIO_DRVSTR_LV4 ((__force s5p_gpio_drvstr_t)0x11) + +/** + * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin + * @pin: The pin number to get the settings for + * + * Read the driver streght value for the specified pin. +*/ +extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin); + +/** + * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin + * @pin: The pin number to configure the driver streght value + * @drvstr: The new value of the driver strength + * + * This function sets the driver strength value for the specified pin. + * It will return 0 if successfull, or a negative error code if the pin + * cannot support the requested setting. +*/ +extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); + #endif /* __PLAT_GPIO_CFG_H */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index 49ff406a706..e358c7da848 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -44,16 +44,26 @@ struct s3c_gpio_cfg; * @chip: The chip structure to be exported via gpiolib. * @base: The base pointer to the gpio configuration registers. * @config: special function and pull-resistor control information. + * @lock: Lock for exclusive access to this gpio bank. * @pm_save: Save information for suspend/resume support. * * This wrapper provides the necessary information for the Samsung * specific gpios being registered with gpiolib. + * + * The lock protects each gpio bank from multiple access of the shared + * configuration registers, or from reading of data whilst another thread + * is writing to the register set. + * + * Each chip has its own lock to avoid any contention between different + * CPU cores trying to get one lock for different GPIO banks, where each + * bank of GPIO has its own register space and configuration registers. */ struct s3c_gpio_chip { struct gpio_chip chip; struct s3c_gpio_cfg *config; struct s3c_gpio_pm *pm; void __iomem *base; + spinlock_t lock; #ifdef CONFIG_PM u32 pm_save[4]; #endif @@ -97,7 +107,7 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); * others = Special functions (dependant on bank) * * Note, since the code to deal with the case where there are two control - * registers instead of one, we do not have a seperate set of function + * registers instead of one, we do not have a separate set of function * (samsung_gpiolib_add_4bit2_chips)for each case. */ extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, @@ -108,6 +118,9 @@ extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); +/* exported for core SoC support to change */ +extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default; + #ifdef CONFIG_S3C_GPIO_TRACK extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; @@ -135,3 +148,7 @@ extern struct s3c_gpio_pm s3c_gpio_pm_4bit; #define __gpio_pm(x) NULL #endif /* CONFIG_PM */ + +/* locking wrappers to deal with multiple access to the same gpio bank */ +#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl) +#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl) diff --git a/arch/arm/plat-samsung/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h index 1ba88ea0aa3..c167e4429bc 100644 --- a/arch/arm/plat-samsung/include/plat/hwmon.h +++ b/arch/arm/plat-samsung/include/plat/hwmon.h @@ -37,5 +37,15 @@ struct s3c_hwmon_pdata { struct s3c_hwmon_chcfg *in[8]; }; +/** + * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device + * @pd: Platform data to register to device. + * + * Register the given platform data for use with the S3C HWMON device. + * The call will copy the platform data, so the board definitions can + * make the structure itself __initdata. + */ +extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd); + #endif /* __ASM_ARCH_ADC_HWMON_H */ diff --git a/arch/arm/plat-samsung/include/plat/pll6553x.h b/arch/arm/plat-samsung/include/plat/pll6553x.h new file mode 100644 index 00000000000..b8b7e1d884f --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/pll6553x.h @@ -0,0 +1,51 @@ +/* arch/arm/plat-samsung/include/plat/pll6553x.h + * partially from arch/arm/mach-s3c64xx/include/mach/pll.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Samsung PLL6553x PLL code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* S3C6400 and compatible (S3C2416, etc.) EPLL code */ + +#define PLL6553X_MDIV_MASK ((1 << (23-16)) - 1) +#define PLL6553X_PDIV_MASK ((1 << (13-8)) - 1) +#define PLL6553X_SDIV_MASK ((1 << (2-0)) - 1) +#define PLL6553X_MDIV_SHIFT (16) +#define PLL6553X_PDIV_SHIFT (8) +#define PLL6553X_SDIV_SHIFT (0) +#define PLL6553X_KDIV_MASK (0xffff) + +static inline unsigned long s3c_get_pll6553x(unsigned long baseclk, + u32 pll0, u32 pll1) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK; + pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK; + sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK; + kdiv = pll1 & PLL6553X_KDIV_MASK; + + /* We need to multiple baseclk by mdiv (the integer part) and kdiv + * which is in 2^16ths, so shift mdiv up (does not overflow) and + * add kdiv before multiplying. The use of tmp is to avoid any + * overflows before shifting bac down into result when multipling + * by the mdiv and kdiv pair. + */ + + tmp = baseclk; + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} diff --git a/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h deleted file mode 100644 index abf2fbc2eb2..00000000000 --- a/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h +++ /dev/null @@ -1,82 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h - * - * Copyright 2007 Simtec Electronics <linux@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2412 IIS register definition -*/ - -#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H -#define __ASM_ARCH_REGS_S3C2412_IIS_H - -#define S3C2412_IISCON (0x00) -#define S3C2412_IISMOD (0x04) -#define S3C2412_IISFIC (0x08) -#define S3C2412_IISPSR (0x0C) -#define S3C2412_IISTXD (0x10) -#define S3C2412_IISRXD (0x14) - -#define S3C2412_IISCON_LRINDEX (1 << 11) -#define S3C2412_IISCON_TXFIFO_EMPTY (1 << 10) -#define S3C2412_IISCON_RXFIFO_EMPTY (1 << 9) -#define S3C2412_IISCON_TXFIFO_FULL (1 << 8) -#define S3C2412_IISCON_RXFIFO_FULL (1 << 7) -#define S3C2412_IISCON_TXDMA_PAUSE (1 << 6) -#define S3C2412_IISCON_RXDMA_PAUSE (1 << 5) -#define S3C2412_IISCON_TXCH_PAUSE (1 << 4) -#define S3C2412_IISCON_RXCH_PAUSE (1 << 3) -#define S3C2412_IISCON_TXDMA_ACTIVE (1 << 2) -#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1) -#define S3C2412_IISCON_IIS_ACTIVE (1 << 0) - -#define S3C64XX_IISMOD_BLC_16BIT (0 << 13) -#define S3C64XX_IISMOD_BLC_8BIT (1 << 13) -#define S3C64XX_IISMOD_BLC_24BIT (2 << 13) -#define S3C64XX_IISMOD_BLC_MASK (3 << 13) - -#define S3C64XX_IISMOD_IMS_PCLK (0 << 10) -#define S3C64XX_IISMOD_IMS_SYSMUX (1 << 10) - -#define S3C2412_IISMOD_MASTER_INTERNAL (0 << 10) -#define S3C2412_IISMOD_MASTER_EXTERNAL (1 << 10) -#define S3C2412_IISMOD_SLAVE (2 << 10) -#define S3C2412_IISMOD_MASTER_MASK (3 << 10) -#define S3C2412_IISMOD_MODE_TXONLY (0 << 8) -#define S3C2412_IISMOD_MODE_RXONLY (1 << 8) -#define S3C2412_IISMOD_MODE_TXRX (2 << 8) -#define S3C2412_IISMOD_MODE_MASK (3 << 8) -#define S3C2412_IISMOD_LR_LLOW (0 << 7) -#define S3C2412_IISMOD_LR_RLOW (1 << 7) -#define S3C2412_IISMOD_SDF_IIS (0 << 5) -#define S3C2412_IISMOD_SDF_MSB (1 << 5) -#define S3C2412_IISMOD_SDF_LSB (2 << 5) -#define S3C2412_IISMOD_SDF_MASK (3 << 5) -#define S3C2412_IISMOD_RCLK_256FS (0 << 3) -#define S3C2412_IISMOD_RCLK_512FS (1 << 3) -#define S3C2412_IISMOD_RCLK_384FS (2 << 3) -#define S3C2412_IISMOD_RCLK_768FS (3 << 3) -#define S3C2412_IISMOD_RCLK_MASK (3 << 3) -#define S3C2412_IISMOD_BCLK_32FS (0 << 1) -#define S3C2412_IISMOD_BCLK_48FS (1 << 1) -#define S3C2412_IISMOD_BCLK_16FS (2 << 1) -#define S3C2412_IISMOD_BCLK_24FS (3 << 1) -#define S3C2412_IISMOD_BCLK_MASK (3 << 1) -#define S3C2412_IISMOD_8BIT (1 << 0) - -#define S3C64XX_IISMOD_CDCLKCON (1 << 12) - -#define S3C2412_IISPSR_PSREN (1 << 15) - -#define S3C2412_IISFIC_TXFLUSH (1 << 15) -#define S3C2412_IISFIC_RXFLUSH (1 << 7) -#define S3C2412_IISFIC_TXCOUNT(x) (((x) >> 8) & 0xf) -#define S3C2412_IISFIC_RXCOUNT(x) (((x) >> 0) & 0xf) - - - -#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */ - diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h new file mode 100644 index 00000000000..5fe6721b57f --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __S3C_DMA_PL330_H_ +#define __S3C_DMA_PL330_H_ + +#define S3C2410_DMAF_AUTOSTART (1 << 0) +#define S3C2410_DMAF_CIRCULAR (1 << 1) + +/* + * PL330 can assign any channel to communicate with + * any of the peripherals attched to the DMAC. + * For the sake of consistency across client drivers, + * We keep the channel names unchanged and only add + * missing peripherals are added. + * Order is not important since S3C PL330 API driver + * use these just as IDs. + */ +enum dma_ch { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_IRDA, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_SPI2_RX, + DMACH_SPI2_TX, + DMACH_AC97_MICIN, + DMACH_AC97_PCMIN, + DMACH_AC97_PCMOUT, + DMACH_EXTERNAL, + DMACH_PWM, + DMACH_SPDIF, + DMACH_HSI_RX, + DMACH_HSI_TX, + DMACH_PCM0_TX, + DMACH_PCM0_RX, + DMACH_PCM1_TX, + DMACH_PCM1_RX, + DMACH_PCM2_TX, + DMACH_PCM2_RX, + DMACH_MSM_REQ3, + DMACH_MSM_REQ2, + DMACH_MSM_REQ1, + DMACH_MSM_REQ0, + /* END Marker, also used to denote a reserved channel */ + DMACH_MAX, +}; + +static inline bool s3c_dma_has_circular(void) +{ + return true; +} + +#include <plat/dma.h> + +#endif /* __S3C_DMA_PL330_H_ */ diff --git a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h b/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h new file mode 100644 index 00000000000..bf5e2a9d408 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h @@ -0,0 +1,32 @@ +/* linux/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __S3C_PL330_PDATA_H +#define __S3C_PL330_PDATA_H + +#include <plat/s3c-dma-pl330.h> + +/* + * Every PL330 DMAC has max 32 peripheral interfaces, + * of which some may be not be really used in your + * DMAC's configuration. + * Populate this array of 32 peri i/fs with relevant + * channel IDs for used peri i/f and DMACH_MAX for + * those unused. + * + * The platforms just need to provide this info + * to the S3C DMA API driver for PL330. + */ +struct s3c_pl330_platdata { + enum dma_ch peri[32]; +}; + +#endif /* __S3C_PL330_PDATA_H */ diff --git a/arch/arm/plat-samsung/include/plat/ts.h b/arch/arm/plat-samsung/include/plat/ts.h new file mode 100644 index 00000000000..26fdb22e0fc --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/ts.h @@ -0,0 +1,25 @@ +/* arch/arm/plat-samsung/include/plat/ts.h + * + * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_TS_H +#define __ASM_ARM_TS_H + +struct s3c2410_ts_mach_info { + int delay; + int presc; + int oversampling_shift; + void (*cfg_gpio)(struct platform_device *dev); +}; + +extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); + +/* defined by architecture to configure gpio */ +extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev); + +#endif /* __ASM_ARM_TS_H */ diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index 69a4c7f02e2..d50ab9d2af5 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -329,7 +329,7 @@ void s3c_pm_save_gpios(void) struct s3c_gpio_chip *ourchip; unsigned int gpio_nr; - for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) { + for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) { ourchip = s3c_gpiolib_getchip(gpio_nr); if (!ourchip) continue; @@ -367,7 +367,7 @@ void s3c_pm_restore_gpios(void) struct s3c_gpio_chip *ourchip; unsigned int gpio_nr; - for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) { + for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) { ourchip = s3c_gpiolib_getchip(gpio_nr); if (!ourchip) continue; diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c new file mode 100644 index 00000000000..a91305a60ae --- /dev/null +++ b/arch/arm/plat-samsung/s3c-pl330.c @@ -0,0 +1,1224 @@ +/* linux/arch/arm/plat-samsung/s3c-pl330.c + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/platform_device.h> + +#include <asm/hardware/pl330.h> + +#include <plat/s3c-pl330-pdata.h> + +/** + * struct s3c_pl330_dmac - Logical representation of a PL330 DMAC. + * @busy_chan: Number of channels currently busy. + * @peri: List of IDs of peripherals this DMAC can work with. + * @node: To attach to the global list of DMACs. + * @pi: PL330 configuration info for the DMAC. + * @kmcache: Pool to quickly allocate xfers for all channels in the dmac. + */ +struct s3c_pl330_dmac { + unsigned busy_chan; + enum dma_ch *peri; + struct list_head node; + struct pl330_info *pi; + struct kmem_cache *kmcache; +}; + +/** + * struct s3c_pl330_xfer - A request submitted by S3C DMA clients. + * @token: Xfer ID provided by the client. + * @node: To attach to the list of xfers on a channel. + * @px: Xfer for PL330 core. + * @chan: Owner channel of this xfer. + */ +struct s3c_pl330_xfer { + void *token; + struct list_head node; + struct pl330_xfer px; + struct s3c_pl330_chan *chan; +}; + +/** + * struct s3c_pl330_chan - Logical channel to communicate with + * a Physical peripheral. + * @pl330_chan_id: Token of a hardware channel thread of PL330 DMAC. + * NULL if the channel is available to be acquired. + * @id: ID of the peripheral that this channel can communicate with. + * @options: Options specified by the client. + * @sdaddr: Address provided via s3c2410_dma_devconfig. + * @node: To attach to the global list of channels. + * @lrq: Pointer to the last submitted pl330_req to PL330 core. + * @xfer_list: To manage list of xfers enqueued. + * @req: Two requests to communicate with the PL330 engine. + * @callback_fn: Callback function to the client. + * @rqcfg: Channel configuration for the xfers. + * @xfer_head: Pointer to the xfer to be next excecuted. + * @dmac: Pointer to the DMAC that manages this channel, NULL if the + * channel is available to be acquired. + * @client: Client of this channel. NULL if the + * channel is available to be acquired. + */ +struct s3c_pl330_chan { + void *pl330_chan_id; + enum dma_ch id; + unsigned int options; + unsigned long sdaddr; + struct list_head node; + struct pl330_req *lrq; + struct list_head xfer_list; + struct pl330_req req[2]; + s3c2410_dma_cbfn_t callback_fn; + struct pl330_reqcfg rqcfg; + struct s3c_pl330_xfer *xfer_head; + struct s3c_pl330_dmac *dmac; + struct s3c2410_dma_client *client; +}; + +/* All DMACs in the platform */ +static LIST_HEAD(dmac_list); + +/* All channels to peripherals in the platform */ +static LIST_HEAD(chan_list); + +/* + * Since we add resources(DMACs and Channels) to the global pool, + * we need to guard access to the resources using a global lock + */ +static DEFINE_SPINLOCK(res_lock); + +/* Returns the channel with ID 'id' in the chan_list */ +static struct s3c_pl330_chan *id_to_chan(const enum dma_ch id) +{ + struct s3c_pl330_chan *ch; + + list_for_each_entry(ch, &chan_list, node) + if (ch->id == id) + return ch; + + return NULL; +} + +/* Allocate a new channel with ID 'id' and add to chan_list */ +static void chan_add(const enum dma_ch id) +{ + struct s3c_pl330_chan *ch = id_to_chan(id); + + /* Return if the channel already exists */ + if (ch) + return; + + ch = kmalloc(sizeof(*ch), GFP_KERNEL); + /* Return silently to work with other channels */ + if (!ch) + return; + + ch->id = id; + ch->dmac = NULL; + + list_add_tail(&ch->node, &chan_list); +} + +/* If the channel is not yet acquired by any client */ +static bool chan_free(struct s3c_pl330_chan *ch) +{ + if (!ch) + return false; + + /* Channel points to some DMAC only when it's acquired */ + return ch->dmac ? false : true; +} + +/* + * Returns 0 is peripheral i/f is invalid or not present on the dmac. + * Index + 1, otherwise. + */ +static unsigned iface_of_dmac(struct s3c_pl330_dmac *dmac, enum dma_ch ch_id) +{ + enum dma_ch *id = dmac->peri; + int i; + + /* Discount invalid markers */ + if (ch_id == DMACH_MAX) + return 0; + + for (i = 0; i < PL330_MAX_PERI; i++) + if (id[i] == ch_id) + return i + 1; + + return 0; +} + +/* If all channel threads of the DMAC are busy */ +static inline bool dmac_busy(struct s3c_pl330_dmac *dmac) +{ + struct pl330_info *pi = dmac->pi; + + return (dmac->busy_chan < pi->pcfg.num_chan) ? false : true; +} + +/* + * Returns the number of free channels that + * can be handled by this dmac only. + */ +static unsigned ch_onlyby_dmac(struct s3c_pl330_dmac *dmac) +{ + enum dma_ch *id = dmac->peri; + struct s3c_pl330_dmac *d; + struct s3c_pl330_chan *ch; + unsigned found, count = 0; + enum dma_ch p; + int i; + + for (i = 0; i < PL330_MAX_PERI; i++) { + p = id[i]; + ch = id_to_chan(p); + + if (p == DMACH_MAX || !chan_free(ch)) + continue; + + found = 0; + list_for_each_entry(d, &dmac_list, node) { + if (d != dmac && iface_of_dmac(d, ch->id)) { + found = 1; + break; + } + } + if (!found) + count++; + } + + return count; +} + +/* + * Measure of suitability of 'dmac' handling 'ch' + * + * 0 indicates 'dmac' can not handle 'ch' either + * because it is not supported by the hardware or + * because all dmac channels are currently busy. + * + * >0 vlaue indicates 'dmac' has the capability. + * The bigger the value the more suitable the dmac. + */ +#define MAX_SUIT UINT_MAX +#define MIN_SUIT 0 + +static unsigned suitablility(struct s3c_pl330_dmac *dmac, + struct s3c_pl330_chan *ch) +{ + struct pl330_info *pi = dmac->pi; + enum dma_ch *id = dmac->peri; + struct s3c_pl330_dmac *d; + unsigned s; + int i; + + s = MIN_SUIT; + /* If all the DMAC channel threads are busy */ + if (dmac_busy(dmac)) + return s; + + for (i = 0; i < PL330_MAX_PERI; i++) + if (id[i] == ch->id) + break; + + /* If the 'dmac' can't talk to 'ch' */ + if (i == PL330_MAX_PERI) + return s; + + s = MAX_SUIT; + list_for_each_entry(d, &dmac_list, node) { + /* + * If some other dmac can talk to this + * peri and has some channel free. + */ + if (d != dmac && iface_of_dmac(d, ch->id) && !dmac_busy(d)) { + s = 0; + break; + } + } + if (s) + return s; + + s = 100; + + /* Good if free chans are more, bad otherwise */ + s += (pi->pcfg.num_chan - dmac->busy_chan) - ch_onlyby_dmac(dmac); + + return s; +} + +/* More than one DMAC may have capability to transfer data with the + * peripheral. This function assigns most suitable DMAC to manage the + * channel and hence communicate with the peripheral. + */ +static struct s3c_pl330_dmac *map_chan_to_dmac(struct s3c_pl330_chan *ch) +{ + struct s3c_pl330_dmac *d, *dmac = NULL; + unsigned sn, sl = MIN_SUIT; + + list_for_each_entry(d, &dmac_list, node) { + sn = suitablility(d, ch); + + if (sn == MAX_SUIT) + return d; + + if (sn > sl) + dmac = d; + } + + return dmac; +} + +/* Acquire the channel for peripheral 'id' */ +static struct s3c_pl330_chan *chan_acquire(const enum dma_ch id) +{ + struct s3c_pl330_chan *ch = id_to_chan(id); + struct s3c_pl330_dmac *dmac; + + /* If the channel doesn't exist or is already acquired */ + if (!ch || !chan_free(ch)) { + ch = NULL; + goto acq_exit; + } + + dmac = map_chan_to_dmac(ch); + /* If couldn't map */ + if (!dmac) { + ch = NULL; + goto acq_exit; + } + + dmac->busy_chan++; + ch->dmac = dmac; + +acq_exit: + return ch; +} + +/* Delete xfer from the queue */ +static inline void del_from_queue(struct s3c_pl330_xfer *xfer) +{ + struct s3c_pl330_xfer *t; + struct s3c_pl330_chan *ch; + int found; + + if (!xfer) + return; + + ch = xfer->chan; + + /* Make sure xfer is in the queue */ + found = 0; + list_for_each_entry(t, &ch->xfer_list, node) + if (t == xfer) { + found = 1; + break; + } + + if (!found) + return; + + /* If xfer is last entry in the queue */ + if (xfer->node.next == &ch->xfer_list) + t = list_entry(ch->xfer_list.next, + struct s3c_pl330_xfer, node); + else + t = list_entry(xfer->node.next, + struct s3c_pl330_xfer, node); + + /* If there was only one node left */ + if (t == xfer) + ch->xfer_head = NULL; + else if (ch->xfer_head == xfer) + ch->xfer_head = t; + + list_del(&xfer->node); +} + +/* Provides pointer to the next xfer in the queue. + * If CIRCULAR option is set, the list is left intact, + * otherwise the xfer is removed from the list. + * Forced delete 'pluck' can be set to override the CIRCULAR option. + */ +static struct s3c_pl330_xfer *get_from_queue(struct s3c_pl330_chan *ch, + int pluck) +{ + struct s3c_pl330_xfer *xfer = ch->xfer_head; + + if (!xfer) + return NULL; + + /* If xfer is last entry in the queue */ + if (xfer->node.next == &ch->xfer_list) + ch->xfer_head = list_entry(ch->xfer_list.next, + struct s3c_pl330_xfer, node); + else + ch->xfer_head = list_entry(xfer->node.next, + struct s3c_pl330_xfer, node); + + if (pluck || !(ch->options & S3C2410_DMAF_CIRCULAR)) + del_from_queue(xfer); + + return xfer; +} + +static inline void add_to_queue(struct s3c_pl330_chan *ch, + struct s3c_pl330_xfer *xfer, int front) +{ + struct pl330_xfer *xt; + + /* If queue empty */ + if (ch->xfer_head == NULL) + ch->xfer_head = xfer; + + xt = &ch->xfer_head->px; + /* If the head already submitted (CIRCULAR head) */ + if (ch->options & S3C2410_DMAF_CIRCULAR && + (xt == ch->req[0].x || xt == ch->req[1].x)) + ch->xfer_head = xfer; + + /* If this is a resubmission, it should go at the head */ + if (front) { + ch->xfer_head = xfer; + list_add(&xfer->node, &ch->xfer_list); + } else { + list_add_tail(&xfer->node, &ch->xfer_list); + } +} + +static inline void _finish_off(struct s3c_pl330_xfer *xfer, + enum s3c2410_dma_buffresult res, int ffree) +{ + struct s3c_pl330_chan *ch; + + if (!xfer) + return; + + ch = xfer->chan; + + /* Do callback */ + if (ch->callback_fn) + ch->callback_fn(NULL, xfer->token, xfer->px.bytes, res); + + /* Force Free or if buffer is not needed anymore */ + if (ffree || !(ch->options & S3C2410_DMAF_CIRCULAR)) + kmem_cache_free(ch->dmac->kmcache, xfer); +} + +static inline int s3c_pl330_submit(struct s3c_pl330_chan *ch, + struct pl330_req *r) +{ + struct s3c_pl330_xfer *xfer; + int ret = 0; + + /* If already submitted */ + if (r->x) + return 0; + + xfer = get_from_queue(ch, 0); + if (xfer) { + r->x = &xfer->px; + + /* Use max bandwidth for M<->M xfers */ + if (r->rqtype == MEMTOMEM) { + struct pl330_info *pi = xfer->chan->dmac->pi; + int burst = 1 << ch->rqcfg.brst_size; + u32 bytes = r->x->bytes; + int bl; + + bl = pi->pcfg.data_bus_width / 8; + bl *= pi->pcfg.data_buf_dep; + bl /= burst; + + /* src/dst_burst_len can't be more than 16 */ + if (bl > 16) + bl = 16; + + while (bl > 1) { + if (!(bytes % (bl * burst))) + break; + bl--; + } + + ch->rqcfg.brst_len = bl; + } else { + ch->rqcfg.brst_len = 1; + } + + ret = pl330_submit_req(ch->pl330_chan_id, r); + + /* If submission was successful */ + if (!ret) { + ch->lrq = r; /* latest submitted req */ + return 0; + } + + r->x = NULL; + + /* If both of the PL330 ping-pong buffers filled */ + if (ret == -EAGAIN) { + dev_err(ch->dmac->pi->dev, "%s:%d!\n", + __func__, __LINE__); + /* Queue back again */ + add_to_queue(ch, xfer, 1); + ret = 0; + } else { + dev_err(ch->dmac->pi->dev, "%s:%d!\n", + __func__, __LINE__); + _finish_off(xfer, S3C2410_RES_ERR, 0); + } + } + + return ret; +} + +static void s3c_pl330_rq(struct s3c_pl330_chan *ch, + struct pl330_req *r, enum pl330_op_err err) +{ + unsigned long flags; + struct s3c_pl330_xfer *xfer; + struct pl330_xfer *xl = r->x; + enum s3c2410_dma_buffresult res; + + spin_lock_irqsave(&res_lock, flags); + + r->x = NULL; + + s3c_pl330_submit(ch, r); + + spin_unlock_irqrestore(&res_lock, flags); + + /* Map result to S3C DMA API */ + if (err == PL330_ERR_NONE) + res = S3C2410_RES_OK; + else if (err == PL330_ERR_ABORT) + res = S3C2410_RES_ABORT; + else + res = S3C2410_RES_ERR; + + /* If last request had some xfer */ + if (xl) { + xfer = container_of(xl, struct s3c_pl330_xfer, px); + _finish_off(xfer, res, 0); + } else { + dev_info(ch->dmac->pi->dev, "%s:%d No Xfer?!\n", + __func__, __LINE__); + } +} + +static void s3c_pl330_rq0(void *token, enum pl330_op_err err) +{ + struct pl330_req *r = token; + struct s3c_pl330_chan *ch = container_of(r, + struct s3c_pl330_chan, req[0]); + s3c_pl330_rq(ch, r, err); +} + +static void s3c_pl330_rq1(void *token, enum pl330_op_err err) +{ + struct pl330_req *r = token; + struct s3c_pl330_chan *ch = container_of(r, + struct s3c_pl330_chan, req[1]); + s3c_pl330_rq(ch, r, err); +} + +/* Release an acquired channel */ +static void chan_release(struct s3c_pl330_chan *ch) +{ + struct s3c_pl330_dmac *dmac; + + if (chan_free(ch)) + return; + + dmac = ch->dmac; + ch->dmac = NULL; + dmac->busy_chan--; +} + +int s3c2410_dma_ctrl(enum dma_ch id, enum s3c2410_chan_op op) +{ + struct s3c_pl330_xfer *xfer; + enum pl330_chan_op pl330op; + struct s3c_pl330_chan *ch; + unsigned long flags; + int idx, ret; + + spin_lock_irqsave(&res_lock, flags); + + ch = id_to_chan(id); + + if (!ch || chan_free(ch)) { + ret = -EINVAL; + goto ctrl_exit; + } + + switch (op) { + case S3C2410_DMAOP_START: + /* Make sure both reqs are enqueued */ + idx = (ch->lrq == &ch->req[0]) ? 1 : 0; + s3c_pl330_submit(ch, &ch->req[idx]); + s3c_pl330_submit(ch, &ch->req[1 - idx]); + pl330op = PL330_OP_START; + break; + + case S3C2410_DMAOP_STOP: + pl330op = PL330_OP_ABORT; + break; + + case S3C2410_DMAOP_FLUSH: + pl330op = PL330_OP_FLUSH; + break; + + case S3C2410_DMAOP_PAUSE: + case S3C2410_DMAOP_RESUME: + case S3C2410_DMAOP_TIMEOUT: + case S3C2410_DMAOP_STARTED: + spin_unlock_irqrestore(&res_lock, flags); + return 0; + + default: + spin_unlock_irqrestore(&res_lock, flags); + return -EINVAL; + } + + ret = pl330_chan_ctrl(ch->pl330_chan_id, pl330op); + + if (pl330op == PL330_OP_START) { + spin_unlock_irqrestore(&res_lock, flags); + return ret; + } + + idx = (ch->lrq == &ch->req[0]) ? 1 : 0; + + /* Abort the current xfer */ + if (ch->req[idx].x) { + xfer = container_of(ch->req[idx].x, + struct s3c_pl330_xfer, px); + + /* Drop xfer during FLUSH */ + if (pl330op == PL330_OP_FLUSH) + del_from_queue(xfer); + + ch->req[idx].x = NULL; + + spin_unlock_irqrestore(&res_lock, flags); + _finish_off(xfer, S3C2410_RES_ABORT, + pl330op == PL330_OP_FLUSH ? 1 : 0); + spin_lock_irqsave(&res_lock, flags); + } + + /* Flush the whole queue */ + if (pl330op == PL330_OP_FLUSH) { + + if (ch->req[1 - idx].x) { + xfer = container_of(ch->req[1 - idx].x, + struct s3c_pl330_xfer, px); + + del_from_queue(xfer); + + ch->req[1 - idx].x = NULL; + + spin_unlock_irqrestore(&res_lock, flags); + _finish_off(xfer, S3C2410_RES_ABORT, 1); + spin_lock_irqsave(&res_lock, flags); + } + + /* Finish off the remaining in the queue */ + xfer = ch->xfer_head; + while (xfer) { + + del_from_queue(xfer); + + spin_unlock_irqrestore(&res_lock, flags); + _finish_off(xfer, S3C2410_RES_ABORT, 1); + spin_lock_irqsave(&res_lock, flags); + + xfer = ch->xfer_head; + } + } + +ctrl_exit: + spin_unlock_irqrestore(&res_lock, flags); + + return ret; +} +EXPORT_SYMBOL(s3c2410_dma_ctrl); + +int s3c2410_dma_enqueue(enum dma_ch id, void *token, + dma_addr_t addr, int size) +{ + struct s3c_pl330_chan *ch; + struct s3c_pl330_xfer *xfer; + unsigned long flags; + int idx, ret = 0; + + spin_lock_irqsave(&res_lock, flags); + + ch = id_to_chan(id); + + /* Error if invalid or free channel */ + if (!ch || chan_free(ch)) { + ret = -EINVAL; + goto enq_exit; + } + + /* Error if size is unaligned */ + if (ch->rqcfg.brst_size && size % (1 << ch->rqcfg.brst_size)) { + ret = -EINVAL; + goto enq_exit; + } + + xfer = kmem_cache_alloc(ch->dmac->kmcache, GFP_ATOMIC); + if (!xfer) { + ret = -ENOMEM; + goto enq_exit; + } + + xfer->token = token; + xfer->chan = ch; + xfer->px.bytes = size; + xfer->px.next = NULL; /* Single request */ + + /* For S3C DMA API, direction is always fixed for all xfers */ + if (ch->req[0].rqtype == MEMTODEV) { + xfer->px.src_addr = addr; + xfer->px.dst_addr = ch->sdaddr; + } else { + xfer->px.src_addr = ch->sdaddr; + xfer->px.dst_addr = addr; + } + + add_to_queue(ch, xfer, 0); + + /* Try submitting on either request */ + idx = (ch->lrq == &ch->req[0]) ? 1 : 0; + + if (!ch->req[idx].x) + s3c_pl330_submit(ch, &ch->req[idx]); + else + s3c_pl330_submit(ch, &ch->req[1 - idx]); + + spin_unlock_irqrestore(&res_lock, flags); + + if (ch->options & S3C2410_DMAF_AUTOSTART) + s3c2410_dma_ctrl(id, S3C2410_DMAOP_START); + + return 0; + +enq_exit: + spin_unlock_irqrestore(&res_lock, flags); + + return ret; +} +EXPORT_SYMBOL(s3c2410_dma_enqueue); + +int s3c2410_dma_request(enum dma_ch id, + struct s3c2410_dma_client *client, + void *dev) +{ + struct s3c_pl330_dmac *dmac; + struct s3c_pl330_chan *ch; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&res_lock, flags); + + ch = chan_acquire(id); + if (!ch) { + ret = -EBUSY; + goto req_exit; + } + + dmac = ch->dmac; + + ch->pl330_chan_id = pl330_request_channel(dmac->pi); + if (!ch->pl330_chan_id) { + chan_release(ch); + ret = -EBUSY; + goto req_exit; + } + + ch->client = client; + ch->options = 0; /* Clear any option */ + ch->callback_fn = NULL; /* Clear any callback */ + ch->lrq = NULL; + + ch->rqcfg.brst_size = 2; /* Default word size */ + ch->rqcfg.swap = SWAP_NO; + ch->rqcfg.scctl = SCCTRL0; /* Noncacheable and nonbufferable */ + ch->rqcfg.dcctl = DCCTRL0; /* Noncacheable and nonbufferable */ + ch->rqcfg.privileged = 0; + ch->rqcfg.insnaccess = 0; + + /* Set invalid direction */ + ch->req[0].rqtype = DEVTODEV; + ch->req[1].rqtype = ch->req[0].rqtype; + + ch->req[0].cfg = &ch->rqcfg; + ch->req[1].cfg = ch->req[0].cfg; + + ch->req[0].peri = iface_of_dmac(dmac, id) - 1; /* Original index */ + ch->req[1].peri = ch->req[0].peri; + + ch->req[0].token = &ch->req[0]; + ch->req[0].xfer_cb = s3c_pl330_rq0; + ch->req[1].token = &ch->req[1]; + ch->req[1].xfer_cb = s3c_pl330_rq1; + + ch->req[0].x = NULL; + ch->req[1].x = NULL; + + /* Reset xfer list */ + INIT_LIST_HEAD(&ch->xfer_list); + ch->xfer_head = NULL; + +req_exit: + spin_unlock_irqrestore(&res_lock, flags); + + return ret; +} +EXPORT_SYMBOL(s3c2410_dma_request); + +int s3c2410_dma_free(enum dma_ch id, struct s3c2410_dma_client *client) +{ + struct s3c_pl330_chan *ch; + struct s3c_pl330_xfer *xfer; + unsigned long flags; + int ret = 0; + unsigned idx; + + spin_lock_irqsave(&res_lock, flags); + + ch = id_to_chan(id); + + if (!ch || chan_free(ch)) + goto free_exit; + + /* Refuse if someone else wanted to free the channel */ + if (ch->client != client) { + ret = -EBUSY; + goto free_exit; + } + + /* Stop any active xfer, Flushe the queue and do callbacks */ + pl330_chan_ctrl(ch->pl330_chan_id, PL330_OP_FLUSH); + + /* Abort the submitted requests */ + idx = (ch->lrq == &ch->req[0]) ? 1 : 0; + + if (ch->req[idx].x) { + xfer = container_of(ch->req[idx].x, + struct s3c_pl330_xfer, px); + + ch->req[idx].x = NULL; + del_from_queue(xfer); + + spin_unlock_irqrestore(&res_lock, flags); + _finish_off(xfer, S3C2410_RES_ABORT, 1); + spin_lock_irqsave(&res_lock, flags); + } + + if (ch->req[1 - idx].x) { + xfer = container_of(ch->req[1 - idx].x, + struct s3c_pl330_xfer, px); + + ch->req[1 - idx].x = NULL; + del_from_queue(xfer); + + spin_unlock_irqrestore(&res_lock, flags); + _finish_off(xfer, S3C2410_RES_ABORT, 1); + spin_lock_irqsave(&res_lock, flags); + } + + /* Pluck and Abort the queued requests in order */ + do { + xfer = get_from_queue(ch, 1); + + spin_unlock_irqrestore(&res_lock, flags); + _finish_off(xfer, S3C2410_RES_ABORT, 1); + spin_lock_irqsave(&res_lock, flags); + } while (xfer); + + ch->client = NULL; + + pl330_release_channel(ch->pl330_chan_id); + + ch->pl330_chan_id = NULL; + + chan_release(ch); + +free_exit: + spin_unlock_irqrestore(&res_lock, flags); + + return ret; +} +EXPORT_SYMBOL(s3c2410_dma_free); + +int s3c2410_dma_config(enum dma_ch id, int xferunit) +{ + struct s3c_pl330_chan *ch; + struct pl330_info *pi; + unsigned long flags; + int i, dbwidth, ret = 0; + + spin_lock_irqsave(&res_lock, flags); + + ch = id_to_chan(id); + + if (!ch || chan_free(ch)) { + ret = -EINVAL; + goto cfg_exit; + } + + pi = ch->dmac->pi; + dbwidth = pi->pcfg.data_bus_width / 8; + + /* Max size of xfer can be pcfg.data_bus_width */ + if (xferunit > dbwidth) { + ret = -EINVAL; + goto cfg_exit; + } + + i = 0; + while (xferunit != (1 << i)) + i++; + + /* If valid value */ + if (xferunit == (1 << i)) + ch->rqcfg.brst_size = i; + else + ret = -EINVAL; + +cfg_exit: + spin_unlock_irqrestore(&res_lock, flags); + + return ret; +} +EXPORT_SYMBOL(s3c2410_dma_config); + +/* Options that are supported by this driver */ +#define S3C_PL330_FLAGS (S3C2410_DMAF_CIRCULAR | S3C2410_DMAF_AUTOSTART) + +int s3c2410_dma_setflags(enum dma_ch id, unsigned int options) +{ + struct s3c_pl330_chan *ch; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&res_lock, flags); + + ch = id_to_chan(id); + + if (!ch || chan_free(ch) || options & ~(S3C_PL330_FLAGS)) + ret = -EINVAL; + else + ch->options = options; + + spin_unlock_irqrestore(&res_lock, flags); + + return 0; +} +EXPORT_SYMBOL(s3c2410_dma_setflags); + +int s3c2410_dma_set_buffdone_fn(enum dma_ch id, s3c2410_dma_cbfn_t rtn) +{ + struct s3c_pl330_chan *ch; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&res_lock, flags); + + ch = id_to_chan(id); + + if (!ch || chan_free(ch)) + ret = -EINVAL; + else + ch->callback_fn = rtn; + + spin_unlock_irqrestore(&res_lock, flags); + + return ret; +} +EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); + +int s3c2410_dma_devconfig(enum dma_ch id, enum s3c2410_dmasrc source, + unsigned long address) +{ + struct s3c_pl330_chan *ch; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&res_lock, flags); + + ch = id_to_chan(id); + + if (!ch || chan_free(ch)) { + ret = -EINVAL; + goto devcfg_exit; + } + + switch (source) { + case S3C2410_DMASRC_HW: /* P->M */ + ch->req[0].rqtype = DEVTOMEM; + ch->req[1].rqtype = DEVTOMEM; + ch->rqcfg.src_inc = 0; + ch->rqcfg.dst_inc = 1; + break; + case S3C2410_DMASRC_MEM: /* M->P */ + ch->req[0].rqtype = MEMTODEV; + ch->req[1].rqtype = MEMTODEV; + ch->rqcfg.src_inc = 1; + ch->rqcfg.dst_inc = 0; + break; + default: + ret = -EINVAL; + goto devcfg_exit; + } + + ch->sdaddr = address; + +devcfg_exit: + spin_unlock_irqrestore(&res_lock, flags); + + return ret; +} +EXPORT_SYMBOL(s3c2410_dma_devconfig); + +int s3c2410_dma_getposition(enum dma_ch id, dma_addr_t *src, dma_addr_t *dst) +{ + struct s3c_pl330_chan *ch = id_to_chan(id); + struct pl330_chanstatus status; + int ret; + + if (!ch || chan_free(ch)) + return -EINVAL; + + ret = pl330_chan_status(ch->pl330_chan_id, &status); + if (ret < 0) + return ret; + + *src = status.src_addr; + *dst = status.dst_addr; + + return 0; +} +EXPORT_SYMBOL(s3c2410_dma_getposition); + +static irqreturn_t pl330_irq_handler(int irq, void *data) +{ + if (pl330_update(data)) + return IRQ_HANDLED; + else + return IRQ_NONE; +} + +static int pl330_probe(struct platform_device *pdev) +{ + struct s3c_pl330_dmac *s3c_pl330_dmac; + struct s3c_pl330_platdata *pl330pd; + struct pl330_info *pl330_info; + struct resource *res; + int i, ret, irq; + + pl330pd = pdev->dev.platform_data; + + /* Can't do without the list of _32_ peripherals */ + if (!pl330pd || !pl330pd->peri) { + dev_err(&pdev->dev, "platform data missing!\n"); + return -ENODEV; + } + + pl330_info = kzalloc(sizeof(*pl330_info), GFP_KERNEL); + if (!pl330_info) + return -ENOMEM; + + pl330_info->pl330_data = NULL; + pl330_info->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + goto probe_err1; + } + + request_mem_region(res->start, resource_size(res), pdev->name); + + pl330_info->base = ioremap(res->start, resource_size(res)); + if (!pl330_info->base) { + ret = -ENXIO; + goto probe_err2; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = irq; + goto probe_err3; + } + + ret = request_irq(irq, pl330_irq_handler, 0, + dev_name(&pdev->dev), pl330_info); + if (ret) + goto probe_err4; + + ret = pl330_add(pl330_info); + if (ret) + goto probe_err5; + + /* Allocate a new DMAC */ + s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL); + if (!s3c_pl330_dmac) { + ret = -ENOMEM; + goto probe_err6; + } + + /* Hook the info */ + s3c_pl330_dmac->pi = pl330_info; + + /* No busy channels */ + s3c_pl330_dmac->busy_chan = 0; + + s3c_pl330_dmac->kmcache = kmem_cache_create(dev_name(&pdev->dev), + sizeof(struct s3c_pl330_xfer), 0, 0, NULL); + + if (!s3c_pl330_dmac->kmcache) { + ret = -ENOMEM; + goto probe_err7; + } + + /* Get the list of peripherals */ + s3c_pl330_dmac->peri = pl330pd->peri; + + /* Attach to the list of DMACs */ + list_add_tail(&s3c_pl330_dmac->node, &dmac_list); + + /* Create a channel for each peripheral in the DMAC + * that is, if it doesn't already exist + */ + for (i = 0; i < PL330_MAX_PERI; i++) + if (s3c_pl330_dmac->peri[i] != DMACH_MAX) + chan_add(s3c_pl330_dmac->peri[i]); + + printk(KERN_INFO + "Loaded driver for PL330 DMAC-%d %s\n", pdev->id, pdev->name); + printk(KERN_INFO + "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n", + pl330_info->pcfg.data_buf_dep, + pl330_info->pcfg.data_bus_width / 8, pl330_info->pcfg.num_chan, + pl330_info->pcfg.num_peri, pl330_info->pcfg.num_events); + + return 0; + +probe_err7: + kfree(s3c_pl330_dmac); +probe_err6: + pl330_del(pl330_info); +probe_err5: + free_irq(irq, pl330_info); +probe_err4: +probe_err3: + iounmap(pl330_info->base); +probe_err2: + release_mem_region(res->start, resource_size(res)); +probe_err1: + kfree(pl330_info); + + return ret; +} + +static int pl330_remove(struct platform_device *pdev) +{ + struct s3c_pl330_dmac *dmac, *d; + struct s3c_pl330_chan *ch; + unsigned long flags; + int del, found; + + if (!pdev->dev.platform_data) + return -EINVAL; + + spin_lock_irqsave(&res_lock, flags); + + found = 0; + list_for_each_entry(d, &dmac_list, node) + if (d->pi->dev == &pdev->dev) { + found = 1; + break; + } + + if (!found) { + spin_unlock_irqrestore(&res_lock, flags); + return 0; + } + + dmac = d; + + /* Remove all Channels that are managed only by this DMAC */ + list_for_each_entry(ch, &chan_list, node) { + + /* Only channels that are handled by this DMAC */ + if (iface_of_dmac(dmac, ch->id)) + del = 1; + else + continue; + + /* Don't remove if some other DMAC has it too */ + list_for_each_entry(d, &dmac_list, node) + if (d != dmac && iface_of_dmac(d, ch->id)) { + del = 0; + break; + } + + if (del) { + spin_unlock_irqrestore(&res_lock, flags); + s3c2410_dma_free(ch->id, ch->client); + spin_lock_irqsave(&res_lock, flags); + list_del(&ch->node); + kfree(ch); + } + } + + /* Remove the DMAC */ + list_del(&dmac->node); + kfree(dmac); + + spin_unlock_irqrestore(&res_lock, flags); + + return 0; +} + +static struct platform_driver pl330_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "s3c-pl330", + }, + .probe = pl330_probe, + .remove = pl330_remove, +}; + +static int __init pl330_init(void) +{ + return platform_driver_register(&pl330_driver); +} +module_init(pl330_init); + +static void __exit pl330_exit(void) +{ + platform_driver_unregister(&pl330_driver); + return; +} +module_exit(pl330_exit); + +MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>"); +MODULE_DESCRIPTION("Driver for PL330 DMA Controller"); +MODULE_LICENSE("GPL"); |