summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-samsung
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-samsung')
-rw-r--r--arch/arm/plat-samsung/include/plat/clock.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/gpio-cfg.h6
-rw-r--r--arch/arm/plat-samsung/include/plat/gpio-core.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/sdhci.h4
-rw-r--r--arch/arm/plat-samsung/init.c2
-rw-r--r--arch/arm/plat-samsung/irq-uart.c10
-rw-r--r--arch/arm/plat-samsung/irq-vic-timer.c11
-rw-r--r--arch/arm/plat-samsung/pm-check.c6
-rw-r--r--arch/arm/plat-samsung/pm.c5
-rw-r--r--arch/arm/plat-samsung/s3c-pl330.c2
-rw-r--r--arch/arm/plat-samsung/wakeup-mask.c8
12 files changed, 25 insertions, 35 deletions
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index 9a82b887491..983c578b827 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -21,7 +21,7 @@ struct clk;
* @set_parent: set the clock's parent, see clk_set_parent().
*
* Group the common clock implementations together so that we
- * don't have to keep setting the same fiels again. We leave
+ * don't have to keep setting the same fields again. We leave
* enable in struct clk.
*
* Adding an extra layer of indirection into the process should
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 5603db0b79b..3ad8386599c 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -114,7 +114,7 @@ extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
* of control per GPIO, generally in the form of:
* 0000 = Input
* 0001 = Output
- * others = Special functions (dependant on bank)
+ * others = Special functions (dependent on bank)
*
* Note, since the code to deal with the case where there are two control
* registers instead of one, we do not have a separate set of functions for
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 5e04fa6eda7..1762dcb4cb9 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -125,7 +125,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
*
* These values control the state of the weak pull-{up,down} resistors
* available on most pins on the S3C series. Not all chips support both
- * up or down settings, and it may be dependant on the chip that is being
+ * up or down settings, and it may be dependent on the chip that is being
* used to whether the particular mode is available.
*/
#define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00)
@@ -138,7 +138,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
* @pull: The configuration for the pull resistor.
*
* This function sets the state of the pull-{up,down} resistor for the
- * specified pin. It will return 0 if successfull, or a negative error
+ * specified pin. It will return 0 if successful, or a negative error
* code if the pin cannot support the requested pull setting.
*
* @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
@@ -202,7 +202,7 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
* @drvstr: The new value of the driver strength
*
* This function sets the driver strength value for the specified pin.
- * It will return 0 if successfull, or a negative error code if the pin
+ * It will return 0 if successful, or a negative error code if the pin
* cannot support the requested setting.
*/
extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index dac35d0a711..8cad4cf19c3 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -108,7 +108,7 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
* of control per GPIO, generally in the form of:
* 0000 = Input
* 0001 = Output
- * others = Special functions (dependant on bank)
+ * others = Special functions (dependent on bank)
*
* Note, since the code to deal with the case where there are two control
* registers instead of one, we do not have a separate set of function
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index b0bdf16549d..058e09654fe 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -57,7 +57,7 @@ enum clk_types {
* @cfg_gpio: Configure the GPIO for a specific card bit-width
* @cfg_card: Configure the interface for a specific card and speed. This
* is necessary the controllers and/or GPIO blocks require the
- * changing of driver-strength and other controls dependant on
+ * changing of driver-strength and other controls dependent on
* the card and speed of operation.
*
* Initialisation data specific to either the machine or the platform
@@ -108,7 +108,7 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
-/* Helper function availablity */
+/* Helper function availability */
extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 6790edfaca6..79d10fca909 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -36,7 +36,7 @@ static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
unsigned int count)
{
for (; count != 0; count--, tab++) {
- if ((idcode & tab->idmask) == tab->idcode)
+ if ((idcode & tab->idmask) == (tab->idcode & tab->idmask))
return tab;
}
diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c
index 4e770355ccb..4d4e571af55 100644
--- a/arch/arm/plat-samsung/irq-uart.c
+++ b/arch/arm/plat-samsung/irq-uart.c
@@ -107,7 +107,6 @@ static struct irq_chip s3c_irq_uart = {
static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
{
- struct irq_desc *desc = irq_to_desc(uirq->parent_irq);
void __iomem *reg_base = uirq->regs;
unsigned int irq;
int offs;
@@ -118,14 +117,13 @@ static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
for (offs = 0; offs < 3; offs++) {
irq = uirq->base_irq + offs;
- set_irq_chip(irq, &s3c_irq_uart);
- set_irq_chip_data(irq, uirq);
- set_irq_handler(irq, handle_level_irq);
+ irq_set_chip_and_handler(irq, &s3c_irq_uart, handle_level_irq);
+ irq_set_chip_data(irq, uirq);
set_irq_flags(irq, IRQF_VALID);
}
- desc->irq_data.handler_data = uirq;
- set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+ irq_set_handler_data(uirq->parent_irq, uirq);
+ irq_set_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
}
/**
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
index dd8692ae5c4..d6ad66ab929 100644
--- a/arch/arm/plat-samsung/irq-vic-timer.c
+++ b/arch/arm/plat-samsung/irq-vic-timer.c
@@ -77,14 +77,11 @@ static struct irq_chip s3c_irq_timer = {
void __init s3c_init_vic_timer_irq(unsigned int parent_irq,
unsigned int timer_irq)
{
- struct irq_desc *desc = irq_to_desc(parent_irq);
- set_irq_chained_handler(parent_irq, s3c_irq_demux_vic_timer);
+ irq_set_chained_handler(parent_irq, s3c_irq_demux_vic_timer);
+ irq_set_handler_data(parent_irq, (void *)timer_irq);
- set_irq_chip(timer_irq, &s3c_irq_timer);
- set_irq_chip_data(timer_irq, (void *)(1 << (timer_irq - IRQ_TIMER0)));
- set_irq_handler(timer_irq, handle_level_irq);
+ irq_set_chip_and_handler(timer_irq, &s3c_irq_timer, handle_level_irq);
+ irq_set_chip_data(timer_irq, (void *)(1 << (timer_irq - IRQ_TIMER0)));
set_irq_flags(timer_irq, IRQF_VALID);
-
- desc->irq_data.handler_data = (void *)timer_irq;
}
diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c
index e4baf76f374..6b733fafe7c 100644
--- a/arch/arm/plat-samsung/pm-check.c
+++ b/arch/arm/plat-samsung/pm-check.c
@@ -164,7 +164,6 @@ static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
*/
static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
{
- void *save_at = phys_to_virt(s3c_sleep_save_phys);
unsigned long addr;
unsigned long left;
void *stkpage;
@@ -192,11 +191,6 @@ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
goto skip_check;
}
- if (in_region(ptr, left, save_at, 32*4 )) {
- S3C_PMDBG("skipping %08lx, has save block in\n", addr);
- goto skip_check;
- }
-
/* calculate and check the checksum */
calc = crc32_le(~0, ptr, left);
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index d5b58d31903..5c0a440d6e1 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -214,8 +214,9 @@ void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
*
* print any IRQs asserted at resume time (ie, we woke from)
*/
-static void s3c_pm_show_resume_irqs(int start, unsigned long which,
- unsigned long mask)
+static void __maybe_unused s3c_pm_show_resume_irqs(int start,
+ unsigned long which,
+ unsigned long mask)
{
int i;
diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c
index b4ff8d74ac4..f85638c6f5a 100644
--- a/arch/arm/plat-samsung/s3c-pl330.c
+++ b/arch/arm/plat-samsung/s3c-pl330.c
@@ -68,7 +68,7 @@ struct s3c_pl330_xfer {
* @req: Two requests to communicate with the PL330 engine.
* @callback_fn: Callback function to the client.
* @rqcfg: Channel configuration for the xfers.
- * @xfer_head: Pointer to the xfer to be next excecuted.
+ * @xfer_head: Pointer to the xfer to be next executed.
* @dmac: Pointer to the DMAC that manages this channel, NULL if the
* channel is available to be acquired.
* @client: Client of this channel. NULL if the
diff --git a/arch/arm/plat-samsung/wakeup-mask.c b/arch/arm/plat-samsung/wakeup-mask.c
index 2e09b6ad84c..dc814037297 100644
--- a/arch/arm/plat-samsung/wakeup-mask.c
+++ b/arch/arm/plat-samsung/wakeup-mask.c
@@ -22,7 +22,7 @@
void samsung_sync_wakemask(void __iomem *reg,
struct samsung_wakeup_mask *mask, int nr_mask)
{
- struct irq_desc *desc;
+ struct irq_data *data;
u32 val;
val = __raw_readl(reg);
@@ -33,10 +33,10 @@ void samsung_sync_wakemask(void __iomem *reg,
continue;
}
- desc = irq_to_desc(mask->irq);
+ data = irq_get_irq_data(mask->irq);
- /* bit of a liberty to read this directly from irq_desc. */
- if (desc->wake_depth > 0)
+ /* bit of a liberty to read this directly from irq_data. */
+ if (irqd_is_wakeup_set(data))
val &= ~mask->bit;
else
val |= mask->bit;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-25 08:19:02 +0000