diff options
Diffstat (limited to 'arch/arm/plat-spear')
| -rw-r--r-- | arch/arm/plat-spear/Kconfig | 4 | ||||
| -rw-r--r-- | arch/arm/plat-spear/Makefile | 4 | ||||
| -rw-r--r-- | arch/arm/plat-spear/include/plat/debug-macro.S | 2 | ||||
| -rw-r--r-- | arch/arm/plat-spear/include/plat/hardware.h | 17 | ||||
| -rw-r--r-- | arch/arm/plat-spear/include/plat/padmux.h | 92 | ||||
| -rw-r--r-- | arch/arm/plat-spear/include/plat/pl080.h | 21 | ||||
| -rw-r--r-- | arch/arm/plat-spear/include/plat/uncompress.h | 2 | ||||
| -rw-r--r-- | arch/arm/plat-spear/padmux.c | 164 | ||||
| -rw-r--r-- | arch/arm/plat-spear/pl080.c | 80 | ||||
| -rw-r--r-- | arch/arm/plat-spear/restart.c | 2 | ||||
| -rw-r--r-- | arch/arm/plat-spear/time.c | 17 |
11 files changed, 117 insertions, 288 deletions
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 1bb3dbce881..387655b5ce0 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -9,9 +9,11 @@ choice default ARCH_SPEAR3XX config ARCH_SPEAR3XX - bool "SPEAr3XX" + bool "ST SPEAr3xx with Device Tree" select ARM_VIC select CPU_ARM926T + select USE_OF + select PINCTRL help Supports for ARM's SPEAR3XX family diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile index e0f2e5b9530..7744802c83e 100644 --- a/arch/arm/plat-spear/Makefile +++ b/arch/arm/plat-spear/Makefile @@ -3,6 +3,6 @@ # # Common support -obj-y := clock.o restart.o time.o +obj-y := clock.o restart.o time.o pl080.o -obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o +obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index 02b160a1ec9..ab3de721c5d 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -12,7 +12,7 @@ */ #include <linux/amba/serial.h> -#include <mach/hardware.h> +#include <mach/spear.h> .macro addruart, rp, rv, tmp mov \rp, #SPEAR_DBG_UART_BASE @ Physical base diff --git a/arch/arm/plat-spear/include/plat/hardware.h b/arch/arm/plat-spear/include/plat/hardware.h deleted file mode 100644 index 70187d763e2..00000000000 --- a/arch/arm/plat-spear/include/plat/hardware.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/hardware.h - * - * Hardware definitions for SPEAr - * - * Copyright (C) 2010 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_HARDWARE_H -#define __PLAT_HARDWARE_H - -#endif /* __PLAT_HARDWARE_H */ diff --git a/arch/arm/plat-spear/include/plat/padmux.h b/arch/arm/plat-spear/include/plat/padmux.h deleted file mode 100644 index 877f3adcf61..00000000000 --- a/arch/arm/plat-spear/include/plat/padmux.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/padmux.h - * - * SPEAr platform specific gpio pads muxing file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_PADMUX_H -#define __PLAT_PADMUX_H - -#include <linux/types.h> - -/* - * struct pmx_reg: configuration structure for mode reg and mux reg - * - * offset: offset of mode reg - * mask: mask of mode reg - */ -struct pmx_reg { - u32 offset; - u32 mask; -}; - -/* - * struct pmx_dev_mode: configuration structure every group of modes of a device - * - * ids: all modes for this configuration - * mask: mask for supported mode - */ -struct pmx_dev_mode { - u32 ids; - u32 mask; -}; - -/* - * struct pmx_mode: mode definition structure - * - * name: mode name - * mask: mode mask - */ -struct pmx_mode { - char *name; - u32 id; - u32 mask; -}; - -/* - * struct pmx_dev: device definition structure - * - * name: device name - * modes: device configuration array for different modes supported - * mode_count: size of modes array - * is_active: is peripheral active/enabled - * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg - */ -struct pmx_dev { - char *name; - struct pmx_dev_mode *modes; - u8 mode_count; - bool is_active; - bool enb_on_reset; -}; - -/* - * struct pmx_driver: driver definition structure - * - * mode: mode to be set - * devs: array of pointer to pmx devices - * devs_count: ARRAY_SIZE of devs - * base: base address of soc config registers - * mode_reg: structure of mode config register - * mux_reg: structure of device mux config register - */ -struct pmx_driver { - struct pmx_mode *mode; - struct pmx_dev **devs; - u8 devs_count; - u32 *base; - struct pmx_reg mode_reg; - struct pmx_reg mux_reg; -}; - -/* pmx functions */ -int pmx_register(struct pmx_driver *driver); - -#endif /* __PLAT_PADMUX_H */ diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h new file mode 100644 index 00000000000..e14a3e4932f --- /dev/null +++ b/arch/arm/plat-spear/include/plat/pl080.h @@ -0,0 +1,21 @@ +/* + * arch/arm/plat-spear/include/plat/pl080.h + * + * DMAC pl080 definitions for SPEAr platform + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_PL080_H +#define __PLAT_PL080_H + +struct pl08x_dma_chan; +int pl080_get_signal(struct pl08x_dma_chan *ch); +void pl080_put_signal(struct pl08x_dma_chan *ch); + +#endif /* __PLAT_PL080_H */ diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h index 1bf84527aee..6dd455bafdf 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -13,7 +13,7 @@ #include <linux/io.h> #include <linux/amba/serial.h> -#include <mach/hardware.h> +#include <mach/spear.h> #ifndef __PLAT_UNCOMPRESS_H #define __PLAT_UNCOMPRESS_H diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c deleted file mode 100644 index 555eec6dc1c..00000000000 --- a/arch/arm/plat-spear/padmux.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/padmux.c - * - * SPEAr platform specific gpio pads muxing source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/err.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <plat/padmux.h> - -/* - * struct pmx: pmx definition structure - * - * base: base address of configuration registers - * mode_reg: mode configurations - * mux_reg: muxing configurations - * active_mode: pointer to current active mode - */ -struct pmx { - u32 base; - struct pmx_reg mode_reg; - struct pmx_reg mux_reg; - struct pmx_mode *active_mode; -}; - -static struct pmx *pmx; - -/** - * pmx_mode_set - Enables an multiplexing mode - * @mode - pointer to pmx mode - * - * It will set mode of operation in hardware. - * Returns -ve on Err otherwise 0 - */ -static int pmx_mode_set(struct pmx_mode *mode) -{ - u32 val; - - if (!mode->name) - return -EFAULT; - - pmx->active_mode = mode; - - val = readl(pmx->base + pmx->mode_reg.offset); - val &= ~pmx->mode_reg.mask; - val |= mode->mask & pmx->mode_reg.mask; - writel(val, pmx->base + pmx->mode_reg.offset); - - return 0; -} - -/** - * pmx_devs_enable - Enables list of devices - * @devs - pointer to pmx device array - * @count - number of devices to enable - * - * It will enable pads for all required peripherals once and only once. - * If peripheral is not supported by current mode then request is rejected. - * Conflicts between peripherals are not handled and peripherals will be - * enabled in the order they are present in pmx_dev array. - * In case of conflicts last peripheral enabled will be present. - * Returns -ve on Err otherwise 0 - */ -static int pmx_devs_enable(struct pmx_dev **devs, u8 count) -{ - u32 val, i, mask; - - if (!count) - return -EINVAL; - - val = readl(pmx->base + pmx->mux_reg.offset); - for (i = 0; i < count; i++) { - u8 j = 0; - - if (!devs[i]->name || !devs[i]->modes) { - printk(KERN_ERR "padmux: dev name or modes is null\n"); - continue; - } - /* check if peripheral exists in active mode */ - if (pmx->active_mode) { - bool found = false; - for (j = 0; j < devs[i]->mode_count; j++) { - if (devs[i]->modes[j].ids & - pmx->active_mode->id) { - found = true; - break; - } - } - if (found == false) { - printk(KERN_ERR "%s device not available in %s"\ - "mode\n", devs[i]->name, - pmx->active_mode->name); - continue; - } - } - - /* enable peripheral */ - mask = devs[i]->modes[j].mask & pmx->mux_reg.mask; - if (devs[i]->enb_on_reset) - val &= ~mask; - else - val |= mask; - - devs[i]->is_active = true; - } - writel(val, pmx->base + pmx->mux_reg.offset); - kfree(pmx); - - /* this will ensure that multiplexing can't be changed now */ - pmx = (struct pmx *)-1; - - return 0; -} - -/** - * pmx_register - registers a platform requesting pad mux feature - * @driver - pointer to driver structure containing driver specific parameters - * - * Also this must be called only once. This will allocate memory for pmx - * structure, will call pmx_mode_set, will call pmx_devs_enable. - * Returns -ve on Err otherwise 0 - */ -int pmx_register(struct pmx_driver *driver) -{ - int ret = 0; - - if (pmx) - return -EPERM; - if (!driver->base || !driver->devs) - return -EFAULT; - - pmx = kzalloc(sizeof(*pmx), GFP_KERNEL); - if (!pmx) - return -ENOMEM; - - pmx->base = (u32)driver->base; - pmx->mode_reg.offset = driver->mode_reg.offset; - pmx->mode_reg.mask = driver->mode_reg.mask; - pmx->mux_reg.offset = driver->mux_reg.offset; - pmx->mux_reg.mask = driver->mux_reg.mask; - - /* choose mode to enable */ - if (driver->mode) { - ret = pmx_mode_set(driver->mode); - if (ret) - goto pmx_fail; - } - ret = pmx_devs_enable(driver->devs, driver->devs_count); - if (ret) - goto pmx_fail; - - return 0; - -pmx_fail: - return ret; -} diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c new file mode 100644 index 00000000000..a56a067717c --- /dev/null +++ b/arch/arm/plat-spear/pl080.c @@ -0,0 +1,80 @@ +/* + * arch/arm/plat-spear/pl080.c + * + * DMAC pl080 definitions for SPEAr platform + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/amba/pl08x.h> +#include <linux/amba/bus.h> +#include <linux/bug.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/spinlock_types.h> +#include <mach/spear.h> +#include <mach/misc_regs.h> + +static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x); + +struct { + unsigned char busy; + unsigned char val; +} signals[16] = {{0, 0}, }; + +int pl080_get_signal(struct pl08x_dma_chan *ch) +{ + const struct pl08x_channel_data *cd = ch->cd; + unsigned int signal = cd->min_signal, val; + unsigned long flags; + + spin_lock_irqsave(&lock, flags); + + /* Return if signal is already acquired by somebody else */ + if (signals[signal].busy && + (signals[signal].val != cd->muxval)) { + spin_unlock_irqrestore(&lock, flags); + return -EBUSY; + } + + /* If acquiring for the first time, configure it */ + if (!signals[signal].busy) { + val = readl(DMA_CHN_CFG); + + /* + * Each request line has two bits in DMA_CHN_CFG register. To + * goto the bits of current request line, do left shift of + * value by 2 * signal number. + */ + val &= ~(0x3 << (signal * 2)); + val |= cd->muxval << (signal * 2); + writel(val, DMA_CHN_CFG); + } + + signals[signal].busy++; + signals[signal].val = cd->muxval; + spin_unlock_irqrestore(&lock, flags); + + return signal; +} + +void pl080_put_signal(struct pl08x_dma_chan *ch) +{ + const struct pl08x_channel_data *cd = ch->cd; + unsigned long flags; + + spin_lock_irqsave(&lock, flags); + + /* if signal is not used */ + if (!signals[cd->min_signal].busy) + BUG(); + + signals[cd->min_signal].busy--; + + spin_unlock_irqrestore(&lock, flags); +} diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c index 16f203e78d8..4471a232713 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/plat-spear/restart.c @@ -13,7 +13,7 @@ #include <linux/io.h> #include <asm/system_misc.h> #include <asm/hardware/sp810.h> -#include <mach/hardware.h> +#include <mach/spear.h> #include <mach/generic.h> void spear_restart(char mode, const char *cmd) diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index abb5bdecd50..a3164d1647f 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -15,14 +15,13 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/ioport.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/time.h> #include <linux/irq.h> #include <asm/mach/time.h> #include <mach/generic.h> -#include <mach/hardware.h> -#include <mach/irqs.h> /* * We would use TIMER0 and TIMER1 as clockevent and clocksource. @@ -175,7 +174,7 @@ static struct irqaction spear_timer_irq = { .handler = spear_timer_interrupt }; -static void __init spear_clockevent_init(void) +static void __init spear_clockevent_init(int irq) { u32 tick_rate; @@ -195,19 +194,19 @@ static void __init spear_clockevent_init(void) clockevents_register_device(&clkevt); - setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq); + setup_irq(irq, &spear_timer_irq); } -void __init spear_setup_timer(void) +void __init spear_setup_timer(resource_size_t base, int irq) { int ret; - if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) { + if (!request_mem_region(base, SZ_1K, "gpt0")) { pr_err("%s:cannot get IO addr\n", __func__); return; } - gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K); + gpt_base = ioremap(base, SZ_1K); if (!gpt_base) { pr_err("%s:ioremap failed for gpt\n", __func__); goto err_mem; @@ -225,7 +224,7 @@ void __init spear_setup_timer(void) goto err_clk; } - spear_clockevent_init(); + spear_clockevent_init(irq); spear_clocksource_init(); return; @@ -235,5 +234,5 @@ err_clk: err_iomap: iounmap(gpt_base); err_mem: - release_mem_region(SPEAR_GPT0_BASE, SZ_1K); + release_mem_region(base, SZ_1K); } |