diff options
Diffstat (limited to 'arch/arm/plat-versatile')
| -rw-r--r-- | arch/arm/plat-versatile/Kconfig | 17 | ||||
| -rw-r--r-- | arch/arm/plat-versatile/Makefile | 13 | ||||
| -rw-r--r-- | arch/arm/plat-versatile/clcd.c | 182 | ||||
| -rw-r--r-- | arch/arm/plat-versatile/fpga-irq.c | 72 | ||||
| -rw-r--r-- | arch/arm/plat-versatile/headsmp.S | 40 | ||||
| -rw-r--r-- | arch/arm/plat-versatile/include/plat/clcd.h | 9 | ||||
| -rw-r--r-- | arch/arm/plat-versatile/include/plat/fpga-irq.h | 12 | ||||
| -rw-r--r-- | arch/arm/plat-versatile/localtimer.c | 27 | ||||
| -rw-r--r-- | arch/arm/plat-versatile/platsmp.c | 104 |
9 files changed, 469 insertions, 7 deletions
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig new file mode 100644 index 00000000000..52353beb369 --- /dev/null +++ b/arch/arm/plat-versatile/Kconfig @@ -0,0 +1,17 @@ +if PLAT_VERSATILE + +config PLAT_VERSATILE_CLCD + bool + +config PLAT_VERSATILE_FPGA_IRQ + bool + +config PLAT_VERSATILE_LEDS + def_bool y if LEDS_CLASS + depends on ARCH_REALVIEW || ARCH_VERSATILE + +config PLAT_VERSATILE_SCHED_CLOCK + def_bool y if !ARCH_INTEGRATOR_AP + select HAVE_SCHED_CLOCK + +endif diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 16dde081993..69714db47c3 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,8 +1,7 @@ obj-y := clock.o -ifneq ($(CONFIG_ARCH_INTEGRATOR),y) -obj-y += sched-clock.o -endif -ifeq ($(CONFIG_LEDS_CLASS),y) -obj-$(CONFIG_ARCH_REALVIEW) += leds.o -obj-$(CONFIG_ARCH_VERSATILE) += leds.o -endif +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o +obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o +obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o +obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o +obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o +obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/clcd.c b/arch/arm/plat-versatile/clcd.c new file mode 100644 index 00000000000..6628cc27efc --- /dev/null +++ b/arch/arm/plat-versatile/clcd.c @@ -0,0 +1,182 @@ +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/clcd.h> +#include <plat/clcd.h> + +static struct clcd_panel vga = { + .mode = { + .name = "VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 40, + .right_margin = 24, + .upper_margin = 32, + .lower_margin = 11, + .hsync_len = 96, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, + .bpp = 16, +}; + +static struct clcd_panel xvga = { + .mode = { + .name = "XVGA", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15748, + .left_margin = 152, + .right_margin = 48, + .upper_margin = 23, + .lower_margin = 3, + .hsync_len = 104, + .vsync_len = 4, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, + .bpp = 16, +}; + +/* Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT */ +static struct clcd_panel sanyo_tm38qv67a02a = { + .mode = { + .name = "Sanyo TM38QV67A02A", + .refresh = 116, + .xres = 320, + .yres = 240, + .pixclock = 100000, + .left_margin = 6, + .right_margin = 6, + .upper_margin = 5, + .lower_margin = 5, + .hsync_len = 6, + .vsync_len = 6, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +static struct clcd_panel sanyo_2_5_in = { + .mode = { + .name = "Sanyo QVGA Portrait", + .refresh = 116, + .xres = 240, + .yres = 320, + .pixclock = 100000, + .left_margin = 20, + .right_margin = 10, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 10, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +/* Epson L2F50113T00 - 2.2 inch 176x220 Color TFT */ +static struct clcd_panel epson_l2f50113t00 = { + .mode = { + .name = "Epson L2F50113T00", + .refresh = 390, + .xres = 176, + .yres = 220, + .pixclock = 62500, + .left_margin = 3, + .right_margin = 2, + .upper_margin = 1, + .lower_margin = 0, + .hsync_len = 3, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +static struct clcd_panel *panels[] = { + &vga, + &xvga, + &sanyo_tm38qv67a02a, + &sanyo_2_5_in, + &epson_l2f50113t00, +}; + +struct clcd_panel *versatile_clcd_get_panel(const char *name) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(panels); i++) + if (strcmp(panels[i]->mode.name, name) == 0) + break; + + if (i < ARRAY_SIZE(panels)) + return panels[i]; + + pr_err("CLCD: couldn't get parameters for panel %s\n", name); + + return NULL; +} + +int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize) +{ + dma_addr_t dma; + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + pr_err("CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = framesize; + + return 0; +} + +int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +void versatile_clcd_remove_dma(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} diff --git a/arch/arm/plat-versatile/fpga-irq.c b/arch/arm/plat-versatile/fpga-irq.c new file mode 100644 index 00000000000..f0cc8e19b09 --- /dev/null +++ b/arch/arm/plat-versatile/fpga-irq.c @@ -0,0 +1,72 @@ +/* + * Support for Versatile FPGA-based IRQ controllers + */ +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/mach/irq.h> +#include <plat/fpga-irq.h> + +#define IRQ_STATUS 0x00 +#define IRQ_RAW_STATUS 0x04 +#define IRQ_ENABLE_SET 0x08 +#define IRQ_ENABLE_CLEAR 0x0c + +static void fpga_irq_mask(struct irq_data *d) +{ + struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); + u32 mask = 1 << (d->irq - f->irq_start); + + writel(mask, f->base + IRQ_ENABLE_CLEAR); +} + +static void fpga_irq_unmask(struct irq_data *d) +{ + struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); + u32 mask = 1 << (d->irq - f->irq_start); + + writel(mask, f->base + IRQ_ENABLE_SET); +} + +static void fpga_irq_handle(unsigned int irq, struct irq_desc *desc) +{ + struct fpga_irq_data *f = irq_desc_get_handler_data(desc); + u32 status = readl(f->base + IRQ_STATUS); + + if (status == 0) { + do_bad_IRQ(irq, desc); + return; + } + + do { + irq = ffs(status) - 1; + status &= ~(1 << irq); + + generic_handle_irq(irq + f->irq_start); + } while (status); +} + +void __init fpga_irq_init(int parent_irq, u32 valid, struct fpga_irq_data *f) +{ + unsigned int i; + + f->chip.irq_ack = fpga_irq_mask; + f->chip.irq_mask = fpga_irq_mask; + f->chip.irq_unmask = fpga_irq_unmask; + + if (parent_irq != -1) { + irq_set_handler_data(parent_irq, f); + irq_set_chained_handler(parent_irq, fpga_irq_handle); + } + + for (i = 0; i < 32; i++) { + if (valid & (1 << i)) { + unsigned int irq = f->irq_start + i; + + irq_set_chip_data(irq, f); + irq_set_chip_and_handler(irq, &f->chip, + handle_level_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + } +} diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S new file mode 100644 index 00000000000..d397a1fb2f5 --- /dev/null +++ b/arch/arm/plat-versatile/headsmp.S @@ -0,0 +1,40 @@ +/* + * linux/arch/arm/plat-versatile/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * Realview/Versatile Express specific entry point for secondary CPUs. + * This provides a "holding pen" into which all secondary cores are held + * until we're ready for them to initialise. + */ +ENTRY(versatile_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + + .align +1: .long . + .long pen_release diff --git a/arch/arm/plat-versatile/include/plat/clcd.h b/arch/arm/plat-versatile/include/plat/clcd.h new file mode 100644 index 00000000000..6bb6a1d2019 --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/clcd.h @@ -0,0 +1,9 @@ +#ifndef PLAT_CLCD_H +#define PLAT_CLCD_H + +struct clcd_panel *versatile_clcd_get_panel(const char *); +int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long); +int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *); +void versatile_clcd_remove_dma(struct clcd_fb *); + +#endif diff --git a/arch/arm/plat-versatile/include/plat/fpga-irq.h b/arch/arm/plat-versatile/include/plat/fpga-irq.h new file mode 100644 index 00000000000..627fafd1e59 --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/fpga-irq.h @@ -0,0 +1,12 @@ +#ifndef PLAT_FPGA_IRQ_H +#define PLAT_FPGA_IRQ_H + +struct fpga_irq_data { + void __iomem *base; + unsigned int irq_start; + struct irq_chip chip; +}; + +void fpga_irq_init(int, u32, struct fpga_irq_data *); + +#endif diff --git a/arch/arm/plat-versatile/localtimer.c b/arch/arm/plat-versatile/localtimer.c new file mode 100644 index 00000000000..0fb3961999b --- /dev/null +++ b/arch/arm/plat-versatile/localtimer.c @@ -0,0 +1,27 @@ +/* + * linux/arch/arm/plat-versatile/localtimer.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/clockchips.h> + +#include <asm/smp_twd.h> +#include <asm/localtimer.h> +#include <mach/irqs.h> + +/* + * Setup the local clock events for a CPU. + */ +int __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + evt->irq = IRQ_LOCALTIMER; + twd_timer_setup(evt); + return 0; +} diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c new file mode 100644 index 00000000000..ba3d471d4bc --- /dev/null +++ b/arch/arm/plat-versatile/platsmp.c @@ -0,0 +1,104 @@ +/* + * linux/arch/arm/plat-versatile/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/smp.h> + +#include <asm/cacheflush.h> + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; + +/* + * Write pen_release in a way that is guaranteed to be visible to all + * observers, irrespective of whether they're taking part in coherency + * or not. This is necessary for the hotplug code to work reliably. + */ +static void __cpuinit write_pen_release(int val) +{ + pen_release = val; + smp_wmb(); + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_secondary_init(0); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + write_pen_release(-1); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * This is really belt and braces; we hold unintended secondary + * CPUs in the holding pen until we're ready for them. However, + * since we haven't sent them a soft interrupt, they shouldn't + * be there. + */ + write_pen_release(cpu); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * the boot monitor to read the system wide flags register, + * and branch to the address found there. + */ + smp_cross_call(cpumask_of(cpu), 1); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} |