diff options
Diffstat (limited to 'arch/arm26/boot/compressed/head.S')
| -rw-r--r-- | arch/arm26/boot/compressed/head.S | 516 |
1 files changed, 0 insertions, 516 deletions
diff --git a/arch/arm26/boot/compressed/head.S b/arch/arm26/boot/compressed/head.S deleted file mode 100644 index 2a2cda36d83..00000000000 --- a/arch/arm26/boot/compressed/head.S +++ /dev/null @@ -1,516 +0,0 @@ -/* - * linux/arch/arm26/boot/compressed/head.S - * - * Copyright (C) 1996-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> - -/* - * Debugging stuff - * - * Note that these macros must not contain any code which is not - * 100% relocatable. Any attempt to do so will result in a crash. - * Please select one of the following when turning on debugging. - */ - - .macro kputc,val - mov r0, \val - bl putc - .endm - - .macro kphex,val,len - mov r0, \val - mov r1, #\len - bl phex - .endm - - .macro debug_reloc_start - .endm - - .macro debug_reloc_end - .endm - - .section ".start", #alloc, #execinstr -/* - * sort out different calling conventions - */ - .align -start: - .type start,#function - .rept 8 - mov r0, r0 - .endr - - b 1f - .word 0x016f2818 @ Magic numbers to help the loader - .word start @ absolute load/run zImage address - .word _edata @ zImage end address -1: mov r7, r1 @ save architecture ID - mov r8, #0 @ save r0 - teqp pc, #0x0c000003 @ turn off interrupts - - .text - adr r0, LC0 - ldmia r0, {r1, r2, r3, r4, r5, r6, ip, sp} - subs r0, r0, r1 @ calculate the delta offset - - teq r0, #0 @ if delta is zero, we're - beq not_relocated @ running at the address we - @ were linked at. - - add r2, r2, r0 @ different address, so we - add r3, r3, r0 @ need to fix up various - add r5, r5, r0 @ pointers. - add r6, r6, r0 - add ip, ip, r0 - add sp, sp, r0 - -1: ldr r1, [r6, #0] @ relocate entries in the GOT - add r1, r1, r0 @ table. This fixes up the - str r1, [r6], #4 @ C references. - cmp r6, ip - blo 1b - -not_relocated: mov r0, #0 -1: str r0, [r2], #4 @ clear bss - str r0, [r2], #4 - str r0, [r2], #4 - str r0, [r2], #4 - cmp r2, r3 - blo 1b - - bl cache_on - - mov r1, sp @ malloc space above stack - add r2, sp, #0x10000 @ 64k max - -/* - * Check to see if we will overwrite ourselves. - * r4 = final kernel address - * r5 = start of this image - * r2 = end of malloc space (and therefore this image) - * We basically want: - * r4 >= r2 -> OK - * r4 + image length <= r5 -> OK - */ - cmp r4, r2 - bhs wont_overwrite - add r0, r4, #4096*1024 @ 4MB largest kernel size - cmp r0, r5 - bls wont_overwrite - - mov r5, r2 @ decompress after malloc space - mov r0, r5 - mov r3, r7 - bl decompress_kernel - - add r0, r0, #127 - bic r0, r0, #127 @ align the kernel length -/* - * r0 = decompressed kernel length - * r1-r3 = unused - * r4 = kernel execution address - * r5 = decompressed kernel start - * r6 = processor ID - * r7 = architecture ID - * r8-r14 = unused - */ - add r1, r5, r0 @ end of decompressed kernel - adr r2, reloc_start - ldr r3, LC1 - add r3, r2, r3 -1: ldmia r2!, {r8 - r13} @ copy relocation code - stmia r1!, {r8 - r13} - ldmia r2!, {r8 - r13} - stmia r1!, {r8 - r13} - cmp r2, r3 - blo 1b - - bl cache_clean_flush - add pc, r5, r0 @ call relocation code - -/* - * We're not in danger of overwriting ourselves. Do this the simple way. - * - * r4 = kernel execution address - * r7 = architecture ID - */ -wont_overwrite: mov r0, r4 - mov r3, r7 - bl decompress_kernel - b call_kernel - - .type LC0, #object -LC0: .word LC0 @ r1 - .word __bss_start @ r2 - .word _end @ r3 - .word _load_addr @ r4 - .word _start @ r5 - .word _got_start @ r6 - .word _got_end @ ip - .word user_stack+4096 @ sp -LC1: .word reloc_end - reloc_start - .size LC0, . - LC0 - -/* - * Turn on the cache. We need to setup some page tables so that we - * can have both the I and D caches on. - * - * We place the page tables 16k down from the kernel execution address, - * and we hope that nothing else is using it. If we're using it, we - * will go pop! - * - * On entry, - * r4 = kernel execution address - * r6 = processor ID - * r7 = architecture number - * r8 = run-time address of "start" - * On exit, - * r1, r2, r3, r8, r9, r12 corrupted - * This routine must preserve: - * r4, r5, r6, r7 - */ - .align 5 -cache_on: mov r3, #8 @ cache_on function - b call_cache_fn - -__setup_mmu: sub r3, r4, #16384 @ Page directory size - bic r3, r3, #0xff @ Align the pointer - bic r3, r3, #0x3f00 -/* - * Initialise the page tables, turning on the cacheable and bufferable - * bits for the RAM area only. - */ - mov r0, r3 - mov r8, r0, lsr #18 - mov r8, r8, lsl #18 @ start of RAM - add r9, r8, #0x10000000 @ a reasonable RAM size - mov r1, #0x12 - orr r1, r1, #3 << 10 - add r2, r3, #16384 -1: cmp r1, r8 @ if virt > start of RAM - orrhs r1, r1, #0x0c @ set cacheable, bufferable - cmp r1, r9 @ if virt > end of RAM - bichs r1, r1, #0x0c @ clear cacheable, bufferable - str r1, [r0], #4 @ 1:1 mapping - add r1, r1, #1048576 - teq r0, r2 - bne 1b -/* - * If ever we are running from Flash, then we surely want the cache - * to be enabled also for our execution instance... We map 2MB of it - * so there is no map overlap problem for up to 1 MB compressed kernel. - * If the execution is in RAM then we would only be duplicating the above. - */ - mov r1, #0x1e - orr r1, r1, #3 << 10 - mov r2, pc, lsr #20 - orr r1, r1, r2, lsl #20 - add r0, r3, r2, lsl #2 - str r1, [r0], #4 - add r1, r1, #1048576 - str r1, [r0] - mov pc, lr - -__armv4_cache_on: - mov r12, lr - bl __setup_mmu - mov r0, #0 - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs - mrc p15, 0, r0, c1, c0, 0 @ read control reg - orr r0, r0, #0x1000 @ I-cache enable - orr r0, r0, #0x0030 - b __common_cache_on - -__arm6_cache_on: - mov r12, lr - bl __setup_mmu - mov r0, #0 - mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 - mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3 - mov r0, #0x30 -__common_cache_on: -#ifndef DEBUG - orr r0, r0, #0x000d @ Write buffer, mmu -#endif - mov r1, #-1 - mcr p15, 0, r3, c2, c0, 0 @ load page table pointer - mcr p15, 0, r1, c3, c0, 0 @ load domain access control - mcr p15, 0, r0, c1, c0, 0 @ load control register - mov pc, r12 - -/* - * All code following this line is relocatable. It is relocated by - * the above code to the end of the decompressed kernel image and - * executed there. During this time, we have no stacks. - * - * r0 = decompressed kernel length - * r1-r3 = unused - * r4 = kernel execution address - * r5 = decompressed kernel start - * r6 = processor ID - * r7 = architecture ID - * r8-r14 = unused - */ - .align 5 -reloc_start: add r8, r5, r0 - debug_reloc_start - mov r1, r4 -1: - .rept 4 - ldmia r5!, {r0, r2, r3, r9 - r13} @ relocate kernel - stmia r1!, {r0, r2, r3, r9 - r13} - .endr - - cmp r5, r8 - blo 1b - debug_reloc_end - -call_kernel: bl cache_clean_flush - bl cache_off - mov r0, #0 - mov r1, r7 @ restore architecture number - mov pc, r4 @ call kernel - -/* - * Here follow the relocatable cache support functions for the - * various processors. This is a generic hook for locating an - * entry and jumping to an instruction at the specified offset - * from the start of the block. Please note this is all position - * independent code. - * - * r1 = corrupted - * r2 = corrupted - * r3 = block offset - * r6 = corrupted - * r12 = corrupted - */ - -call_cache_fn: adr r12, proc_types - mrc p15, 0, r6, c0, c0 @ get processor ID -1: ldr r1, [r12, #0] @ get value - ldr r2, [r12, #4] @ get mask - eor r1, r1, r6 @ (real ^ match) - tst r1, r2 @ & mask - addeq pc, r12, r3 @ call cache function - add r12, r12, #4*5 - b 1b - -/* - * Table for cache operations. This is basically: - * - CPU ID match - * - CPU ID mask - * - 'cache on' method instruction - * - 'cache off' method instruction - * - 'cache flush' method instruction - * - * We match an entry using: ((real_id ^ match) & mask) == 0 - * - * Writethrough caches generally only need 'on' and 'off' - * methods. Writeback caches _must_ have the flush method - * defined. - */ - .type proc_types,#object -proc_types: - .word 0x41560600 @ ARM6/610 - .word 0xffffffe0 - b __arm6_cache_off @ works, but slow - b __arm6_cache_off - mov pc, lr -@ b __arm6_cache_on @ untested -@ b __arm6_cache_off -@ b __armv3_cache_flush - - .word 0x41007000 @ ARM7/710 - .word 0xfff8fe00 - b __arm7_cache_off - b __arm7_cache_off - mov pc, lr - - .word 0x41807200 @ ARM720T (writethrough) - .word 0xffffff00 - b __armv4_cache_on - b __armv4_cache_off - mov pc, lr - - .word 0x41129200 @ ARM920T - .word 0xff00fff0 - b __armv4_cache_on - b __armv4_cache_off - b __armv4_cache_flush - - .word 0x4401a100 @ sa110 / sa1100 - .word 0xffffffe0 - b __armv4_cache_on - b __armv4_cache_off - b __armv4_cache_flush - - .word 0x6901b110 @ sa1110 - .word 0xfffffff0 - b __armv4_cache_on - b __armv4_cache_off - b __armv4_cache_flush - - .word 0x69050000 @ xscale - .word 0xffff0000 - b __armv4_cache_on - b __armv4_cache_off - b __armv4_cache_flush - - .word 0 @ unrecognised type - .word 0 - mov pc, lr - mov pc, lr - mov pc, lr - - .size proc_types, . - proc_types - -/* - * Turn off the Cache and MMU. ARMv3 does not support - * reading the control register, but ARMv4 does. - * - * On entry, r6 = processor ID - * On exit, r0, r1, r2, r3, r12 corrupted - * This routine must preserve: r4, r6, r7 - */ - .align 5 -cache_off: mov r3, #12 @ cache_off function - b call_cache_fn - -__armv4_cache_off: - mrc p15, 0, r0, c1, c0 - bic r0, r0, #0x000d - mcr p15, 0, r0, c1, c0 @ turn MMU and cache off - mov r0, #0 - mcr p15, 0, r0, c7, c7 @ invalidate whole cache v4 - mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4 - mov pc, lr - -__arm6_cache_off: - mov r0, #0x00000030 @ ARM6 control reg. - b __armv3_cache_off - -__arm7_cache_off: - mov r0, #0x00000070 @ ARM7 control reg. - b __armv3_cache_off - -__armv3_cache_off: - mcr p15, 0, r0, c1, c0, 0 @ turn MMU and cache off - mov r0, #0 - mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 - mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3 - mov pc, lr - -/* - * Clean and flush the cache to maintain consistency. - * - * On entry, - * r6 = processor ID - * On exit, - * r1, r2, r3, r12 corrupted - * This routine must preserve: - * r0, r4, r5, r6, r7 - */ - .align 5 -cache_clean_flush: - mov r3, #16 - b call_cache_fn - -__armv4_cache_flush: - bic r1, pc, #31 - add r2, r1, #65536 @ 2x the largest dcache size -1: ldr r12, [r1], #32 @ s/w flush D cache - teq r1, r2 - bne 1b - - mcr p15, 0, r1, c7, c7, 0 @ flush I cache - mcr p15, 0, r1, c7, c10, 4 @ drain WB - mov pc, lr - -__armv3_cache_flush: - mov r1, #0 - mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 - mov pc, lr - -/* - * Various debugging routines for printing hex characters and - * memory, which again must be relocatable. - */ -#ifdef DEBUG - .type phexbuf,#object -phexbuf: .space 12 - .size phexbuf, . - phexbuf - -phex: adr r3, phexbuf - mov r2, #0 - strb r2, [r3, r1] -1: subs r1, r1, #1 - movmi r0, r3 - bmi puts - and r2, r0, #15 - mov r0, r0, lsr #4 - cmp r2, #10 - addge r2, r2, #7 - add r2, r2, #'0' - strb r2, [r3, r1] - b 1b - -puts: loadsp r3 -1: ldrb r2, [r0], #1 - teq r2, #0 - moveq pc, lr -2: writeb r2 - mov r1, #0x00020000 -3: subs r1, r1, #1 - bne 3b - teq r2, #'\n' - moveq r2, #'\r' - beq 2b - teq r0, #0 - bne 1b - mov pc, lr -putc: - mov r2, r0 - mov r0, #0 - loadsp r3 - b 2b - -memdump: mov r12, r0 - mov r10, lr - mov r11, #0 -2: mov r0, r11, lsl #2 - add r0, r0, r12 - mov r1, #8 - bl phex - mov r0, #':' - bl putc -1: mov r0, #' ' - bl putc - ldr r0, [r12, r11, lsl #2] - mov r1, #8 - bl phex - and r0, r11, #7 - teq r0, #3 - moveq r0, #' ' - bleq putc - and r0, r11, #7 - add r11, r11, #1 - teq r0, #7 - bne 1b - mov r0, #'\n' - bl putc - cmp r11, #64 - blt 2b - mov pc, r10 -#endif - -reloc_end: - - .align - .section ".stack", "aw" -user_stack: .space 4096 |