diff options
Diffstat (limited to 'arch/arm')
105 files changed, 852 insertions, 584 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a48aecc17ea..dfb0312f4e7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1280,7 +1280,7 @@ config ARM_ERRATA_743622 depends on CPU_V7 help This option enables the workaround for the 743622 Cortex-A9 - (r2p0..r2p2) erratum. Under very rare conditions, a faulty + (r2p*) erratum. Under very rare conditions, a faulty optimisation in the Cortex-A9 Store Buffer may lead to data corruption. This workaround sets a specific bit in the diagnostic register of the Cortex-A9 which disables the Store Buffer diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore index ce1c5ff746e..3c79f85975a 100644 --- a/arch/arm/boot/.gitignore +++ b/arch/arm/boot/.gitignore @@ -3,3 +3,4 @@ zImage xipImage bootpImage uImage +*.dtb diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index d1bcd7b13eb..fb1f1cfce60 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -320,13 +320,6 @@ err0: return -EBUSY; } -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as we don't have even crappy BIOSes to set it properly. - * The implementation is from arch/i386/pci/i386.c - */ -unsigned int pcibios_max_latency = 255; - /* ITE bridge requires setting latency timer to avoid early bus access termination by PCI bus master devices */ diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index d8e44a43047..ff3ad224482 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) struct pl330_thread *thrd = ch_id; struct pl330_dmac *pl330; unsigned long flags; - int ret = 0, active = thrd->req_running; + int ret = 0, active; if (!thrd || thrd->free || thrd->dmac->state == DYING) return -EINVAL; pl330 = thrd->dmac; + active = thrd->req_running; spin_lock_irqsave(&pl330->lock, flags); diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 62f8095d46d..23371b17b23 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -137,6 +137,11 @@ disable_irq .endm + .macro save_and_disable_irqs_notrace, oldcpsr + mrs \oldcpsr, cpsr + disable_irq_notrace + .endm + /* * Restore interrupt state previously stored in a register. We don't * guarantee that this will preserve the flags. diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h index 575fa8186ca..c1821385abf 100644 --- a/arch/arm/include/asm/hardware/pl330.h +++ b/arch/arm/include/asm/hardware/pl330.h @@ -41,7 +41,7 @@ enum pl330_dstcachectrl { DCCTRL1, /* Bufferable only */ DCCTRL2, /* Cacheable, but do not allocate */ DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1 = 8, + DINVALID1, /* AWCACHE = 0x1000 */ DINVALID2, DCCTRL6, /* Cacheable write-through, allocate on writes only */ DCCTRL7, /* Cacheable write-back, allocate on writes only */ diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index b5a5be2536c..90114faa9f3 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type); u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, - int idx, int overflow); + int idx); int armpmu_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index ce280b8d613..cb8d638924f 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -22,6 +22,7 @@ #include <asm/hw_breakpoint.h> #include <asm/ptrace.h> #include <asm/types.h> +#include <asm/system.h> #ifdef __KERNEL__ #define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index 4dd0edab6a6..1651d495074 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm) memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE)); + vma.vm_flags = VM_EXEC; vma.vm_mm = mm; flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE); diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 5bb91bf3d47..b2abfa18f13 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event, u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, - int idx, int overflow) + int idx) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); u64 delta, prev_raw_count, new_raw_count; @@ -193,13 +193,7 @@ again: new_raw_count) != prev_raw_count) goto again; - new_raw_count &= armpmu->max_period; - prev_raw_count &= armpmu->max_period; - - if (overflow) - delta = armpmu->max_period - prev_raw_count + new_raw_count + 1; - else - delta = new_raw_count - prev_raw_count; + delta = (new_raw_count - prev_raw_count) & armpmu->max_period; local64_add(delta, &event->count); local64_sub(delta, &hwc->period_left); @@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event) if (hwc->idx < 0) return; - armpmu_event_update(event, hwc, hwc->idx, 0); + armpmu_event_update(event, hwc, hwc->idx); } static void @@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags) if (!(hwc->state & PERF_HES_STOPPED)) { armpmu->disable(hwc, hwc->idx); barrier(); /* why? */ - armpmu_event_update(event, hwc, hwc->idx, 0); + armpmu_event_update(event, hwc, hwc->idx); hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; } } @@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event) hwc->config_base |= (unsigned long)mapping; if (!hwc->sample_period) { - hwc->sample_period = armpmu->max_period; + /* + * For non-sampling runs, limit the sample_period to half + * of the counter width. That way, the new counter value + * is far less likely to overtake the previous one unless + * you have some serious IRQ latency issues. + */ + hwc->sample_period = armpmu->max_period >> 1; hwc->last_period = hwc->sample_period; local64_set(&hwc->period_left, hwc->sample_period); } @@ -680,6 +680,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu) } /* + * PMU hardware loses all context when a CPU goes offline. + * When a CPU is hotplugged back in, since some hardware registers are + * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading + * junk values out of them. + */ +static int __cpuinit pmu_cpu_notify(struct notifier_block *b, + unsigned long action, void *hcpu) +{ + if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) + return NOTIFY_DONE; + + if (cpu_pmu && cpu_pmu->reset) + cpu_pmu->reset(NULL); + + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata pmu_cpu_notifier = { + .notifier_call = pmu_cpu_notify, +}; + +/* * CPU PMU identification and registration. */ static int __init @@ -730,6 +752,7 @@ init_hw_perf_events(void) pr_info("enabled with %s PMU driver, %d counters available\n", cpu_pmu->name, cpu_pmu->num_events); cpu_pmu_init(cpu_pmu); + register_cpu_notifier(&pmu_cpu_notifier); armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW); } else { pr_info("no hardware support available\n"); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 533be9930ec..b78af0cc6ef 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc, raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static int counter_is_active(unsigned long pmcr, int idx) -{ - unsigned long mask = 0; - if (idx == ARMV6_CYCLE_COUNTER) - mask = ARMV6_PMCR_CCOUNT_IEN; - else if (idx == ARMV6_COUNTER0) - mask = ARMV6_PMCR_COUNT0_IEN; - else if (idx == ARMV6_COUNTER1) - mask = ARMV6_PMCR_COUNT1_IEN; - - if (mask) - return pmcr & mask; - - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return 0; -} - static irqreturn_t armv6pmu_handle_irq(int irq_num, void *dev) @@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num, struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!counter_is_active(pmcr, idx)) + /* Ignore if we don't have an event. */ + if (!event) continue; /* @@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num, continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 6933244c68f..4d7095af2ab 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx) counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter))); + isb(); + /* Clear the overflow flag in case an interrupt is pending. */ + asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter))); + isb(); + return idx; } @@ -955,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; + /* Ignore if we don't have an event. */ + if (!event) + continue; + /* * We have a single interrupt for all counters. Check that * each counter has overflowed before we process it. @@ -963,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 3b99d826982..71a21e6712f 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; + if (!event) + continue; + if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; @@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) + if (!event) + continue; + + if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx)) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; @@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) static void xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) { - unsigned long flags, ien, evtsel; + unsigned long flags, ien, evtsel, of_flags; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); ien = xscale2pmu_read_int_enable(); @@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) switch (idx) { case XSCALE_CYCLE_COUNTER: ien &= ~XSCALE2_CCOUNT_INT_EN; + of_flags = XSCALE2_CCOUNT_OVERFLOW; break; case XSCALE_COUNTER0: ien &= ~XSCALE2_COUNT0_INT_EN; evtsel &= ~XSCALE2_COUNT0_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; + of_flags = XSCALE2_COUNT0_OVERFLOW; break; case XSCALE_COUNTER1: ien &= ~XSCALE2_COUNT1_INT_EN; evtsel &= ~XSCALE2_COUNT1_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; + of_flags = XSCALE2_COUNT1_OVERFLOW; break; case XSCALE_COUNTER2: ien &= ~XSCALE2_COUNT2_INT_EN; evtsel &= ~XSCALE2_COUNT2_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; + of_flags = XSCALE2_COUNT2_OVERFLOW; break; case XSCALE_COUNTER3: ien &= ~XSCALE2_COUNT3_INT_EN; evtsel &= ~XSCALE2_COUNT3_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; + of_flags = XSCALE2_COUNT3_OVERFLOW; break; default: WARN_ONCE(1, "invalid counter number (%d)\n", idx); @@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) raw_spin_lock_irqsave(&events->pmu_lock, flags); xscale2pmu_write_event_select(evtsel); xscale2pmu_write_int_enable(ien); + xscale2pmu_write_overflow_flags(of_flags); raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index e33870ff0ac..ede6443c34d 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -23,6 +23,7 @@ #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> #include <linux/regset.h> +#include <linux/audit.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -904,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } +#ifdef __ARMEB__ +#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB +#else +#define AUDIT_ARCH_NR AUDIT_ARCH_ARM +#endif + asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; @@ -918,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) if (!ip) audit_syscall_exit(regs); else - audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0, + audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); if (!test_thread_flag(TIF_SYSCALL_TRACE)) diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index a622e7a8b12..fef42b21cec 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -132,7 +132,7 @@ static struct notifier_block twd_cpufreq_nb = { static int twd_cpufreq_init(void) { - if (!IS_ERR(twd_clk)) + if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) return cpufreq_register_notifier(&twd_cpufreq_nb, CPUFREQ_TRANSITION_NOTIFIER); diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index b7582dd10dc..96e2adcd5a8 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -38,10 +38,6 @@ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) static u64 hdmac_dmamask = DMA_BIT_MASK(32); -static struct at_dma_platform_data atdma_pdata = { - .nr_channels = 8, -}; - static struct resource hdmac_resources[] = { [0] = { .start = AT91SAM9G45_BASE_DMA, @@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = { }; static struct platform_device at_hdmac_device = { - .name = "at_hdmac", + .name = "at91sam9g45_dma", .id = -1, .dev = { .dma_mask = &hdmac_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &atdma_pdata, }, .resource = hdmac_resources, .num_resources = ARRAY_SIZE(hdmac_resources), @@ -69,9 +64,15 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); - dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask); - platform_device_register(&at_hdmac_device); +#if defined(CONFIG_OF) + struct device_node *of_node = + of_find_node_by_name(NULL, "dma-controller"); + + if (of_node) + of_node_put(of_node); + else +#endif + platform_device_register(&at_hdmac_device); } #else void __init at91_add_device_hdmac(void) {} diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 61908dce978..9be71c11d0f 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -33,10 +33,6 @@ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) static u64 hdmac_dmamask = DMA_BIT_MASK(32); -static struct at_dma_platform_data atdma_pdata = { - .nr_channels = 2, -}; - static struct resource hdmac_resources[] = { [0] = { .start = AT91SAM9RL_BASE_DMA, @@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = { }; static struct platform_device at_hdmac_device = { - .name = "at_hdmac", + .name = "at91sam9rl_dma", .id = -1, .dev = { .dma_mask = &hdmac_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &atdma_pdata, }, .resource = hdmac_resources, .num_resources = ARRAY_SIZE(hdmac_resources), @@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); platform_device_register(&at_hdmac_device); } #else diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index d5fb44f16d3..d67d0b4feb6 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -34,6 +34,7 @@ #include <mach/ep93xx_spi.h> #include <mach/gpio-ep93xx.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> @@ -361,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") .atag_offset = 0x100, .map_io = vision_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = vision_init_machine, .restart = ep93xx_restart, diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 0fc65ffde8f..38939956c34 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> +#include <linux/interrupt.h> #include <linux/fb.h> #include <linux/mfd/max8998.h> #include <linux/regulator/machine.h> @@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = { .threshold = 0x28, .voltage = 2800000, /* 2.8V */ .orient = MXT_DIAGONAL, + .irqflags = IRQF_TRIGGER_FALLING, }; static struct i2c_board_info i2c3_devs[] __initdata = { diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h index 2667f52e3b0..9e3b90df32e 100644 --- a/arch/arm/mach-lpc32xx/include/mach/irqs.h +++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h @@ -61,7 +61,7 @@ */ #define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1) #define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2) -#define IRQ_LPC32XX_GPI_11 LPC32XX_SIC1_IRQ(4) +#define IRQ_LPC32XX_GPI_28 LPC32XX_SIC1_IRQ(4) #define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6) #define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7) #define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8) diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index 4eae566dfdc..c74de01ab5b 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = { .event_group = &lpc32xx_event_pin_regs, .mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT, }, + [IRQ_LPC32XX_GPI_28] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT, + }, [IRQ_LPC32XX_GPIO_00] = { .event_group = &lpc32xx_event_int_regs, .mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT, @@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state) if (state) eventreg |= lpc32xx_events[d->irq].mask; - else + else { eventreg &= ~lpc32xx_events[d->irq].mask; + /* + * When disabling the wakeup, clear the latched + * event + */ + __raw_writel(lpc32xx_events[d->irq].mask, + lpc32xx_events[d->irq]. + event_group->rawstat_reg); + } + __raw_writel(eventreg, lpc32xx_events[d->irq].event_group->enab_reg); @@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void) /* Setup SIC1 */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); - __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); - __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); + __raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); + __raw_writel(SIC1_ATR_DEFAULT, + LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); /* Setup SIC2 */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); - __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); - __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); + __raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); + __raw_writel(SIC2_ATR_DEFAULT, + LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); /* Configure supported IRQ's */ for (i = 0; i < NR_IRQS; i++) { diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index 429cfdbb2b3..f2735281616 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c @@ -88,6 +88,7 @@ struct uartinit { char *uart_ck_name; u32 ck_mode_mask; void __iomem *pdiv_clk_reg; + resource_size_t mapbase; }; static struct uartinit uartinit_data[] __initdata = { @@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5), .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL, + .mapbase = LPC32XX_UART5_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT @@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3), .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL, + .mapbase = LPC32XX_UART3_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT @@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4), .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL, + .mapbase = LPC32XX_UART4_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT @@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6), .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL, + .mapbase = LPC32XX_UART6_BASE, }, #endif }; @@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void) /* pre-UART clock divider set to 1 */ __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg); + + /* + * Force a flush of the RX FIFOs to work around a + * HW bug + */ + puart = uartinit_data[i].mapbase; + __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); + __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart)); + j = LPC32XX_SUART_FIFO_SIZE; + while (j--) + tmp = __raw_readl( + LPC32XX_UART_DLL_FIFO(puart)); + __raw_writel(0, LPC32XX_UART_IIR_FCR(puart)); } /* This needs to be done after all UART clocks are setup */ __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE); - for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) { + for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { /* Force a flush of the RX FIFOs to work around a HW bug */ puart = serial_std_platform_data[i].mapbase; __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 17cb7606012..3588a558415 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -17,7 +17,6 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/interrupt.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 7bc17eaa12e..ada1213982b 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -24,7 +24,6 @@ #include <mach/dma.h> #include <mach/devices.h> #include <mach/mfp.h> -#include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <mach/pxa168.h> diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index 8e3b5af04a5..bc97170125b 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -12,7 +12,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/smc91x.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 309369ea697..be2002f42de 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -416,13 +416,13 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { omap1_usb_init(&innovator1510_usb_config); - innovator_config[1].data = &innovator1510_lcd_config; + innovator_config[0].data = &innovator1510_lcd_config; } #endif #ifdef CONFIG_ARCH_OMAP16XX if (cpu_is_omap1610()) { omap1_usb_init(&h2_usb_config); - innovator_config[1].data = &innovator1610_lcd_config; + innovator_config[0].data = &innovator1610_lcd_config; } #endif omap_board_config = innovator_config; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index d965da45160..e20c8ab80b0 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING going on could result in system crashes; config OMAP4_ERRATA_I688 - bool "OMAP4 errata: Async Bridge Corruption (BROKEN)" - depends on ARCH_OMAP4 && BROKEN + bool "OMAP4 errata: Async Bridge Corruption" + depends on ARCH_OMAP4 select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 42a4d11fad2..67226271760 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask) else *openp = 0; +#ifdef CONFIG_MMC_OMAP omap_mmc_notify_cover_event(mmc_device, index, *openp); +#else + pr_warn("MMC: notify cover event not available\n"); +#endif } static int n8x0_mmc_late_init(struct device *dev) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c775bead149..c877236a844 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1; platform_device_register(&leds_gpio); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index febffde2ff1..7e9338e8d68 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -132,6 +132,7 @@ void omap3_map_io(void); void am33xx_map_io(void); void omap4_map_io(void); void ti81xx_map_io(void); +void omap_barriers_init(void); /** * omap_test_timeout - busy-loop, testing a condition diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index cfdbb86bc84..72e018b9b26 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev, struct timespec ts_preidle, ts_postidle, ts_idle; u32 cpu1_state; int idle_time; - int new_state_idx; int cpu_id = smp_processor_id(); /* Used to keep track of the total time in idle */ @@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev, */ cpu1_state = pwrdm_read_pwrst(cpu1_pd); if (cpu1_state != PWRDM_POWER_OFF) { - new_state_idx = drv->safe_state_index; - cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]); + index = drv->safe_state_index; + cx = cpuidle_get_statedata(&dev->states_usage[index]); } if (index > 0) diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 997033129d2..bbb870c04a5 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -19,6 +19,8 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <plat/board.h> #include <plat/gpmc.h> @@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .flags = SMSC911X_USE_16BIT, }; +static struct regulator_consumer_supply gpmc_smsc911x_supply[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + +/* Generic regulator definition to satisfy smsc911x */ +static struct regulator_init_data gpmc_smsc911x_reg_init_data = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply), + .consumer_supplies = gpmc_smsc911x_supply, +}; + +static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = { + .supply_name = "gpmc_smsc911x", + .microvolts = 3300000, + .gpio = -EINVAL, + .startup_delay = 0, + .enable_high = 0, + .enabled_at_boot = 1, + .init_data = &gpmc_smsc911x_reg_init_data, +}; + +/* + * Platform device id of 42 is a temporary fix to avoid conflicts + * with other reg-fixed-voltage devices. The real fix should + * involve the driver core providing a way of dynamically + * assigning a unique id on registration for platform devices + * in the same name space. + */ +static struct platform_device gpmc_smsc911x_regulator = { + .name = "reg-fixed-voltage", + .id = 42, + .dev = { + .platform_data = &gpmc_smsc911x_fixed_reg_data, + }, +}; + /* * Initialize smsc911x device connected to the GPMC. Note that we * assume that pin multiplexing is done in the board-*.c file, @@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_cfg = board_data; + ret = platform_device_register(&gpmc_smsc911x_regulator); + if (ret < 0) { + pr_err("Unable to register smsc911x regulators: %d\n", ret); + return; + } + if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { pr_err("Failed to request GPMC mem region\n"); return; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index b40c2889529..19dd1657245 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, return 0; } +static int omap_hsmmc_done; #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) @@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) { u32 reg; + if (omap_hsmmc_done) + return; + + omap_hsmmc_done = 1; + if (!cpu_is_omap44xx()) { if (cpu_is_omap2430()) { control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 6c5826605ea..719ee423abe 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev) case 0xb944: omap_revision = AM335X_REV_ES1_0; *cpu_rev = "1.0"; + break; case 0xb8f2: switch (rev) { case 0: diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index eb50c29fb64..fb11b44fbde 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void) void __init omap44xx_map_common_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); + omap_barriers_init(); } #endif diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 609ea2ded7e..415a6f1cf41 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = { .ops = &omap2_mbox_ops, .priv = &omap2_mbox_iva_priv, }; +#endif -struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL }; +#ifdef CONFIG_ARCH_OMAP2 +struct omap_mbox *omap2_mboxes[] = { + &mbox_dsp_info, +#ifdef CONFIG_SOC_OMAP2420 + &mbox_iva_info, +#endif + NULL +}; #endif #if defined(CONFIG_ARCH_OMAP4) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index fb8bc9fa43b..611a0e3d54c 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int __init +static int omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index b8822048e40..ac49384d028 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -150,7 +150,8 @@ err_out: platform_device_put(omap_iommu_pdev[i]); return err; } -module_init(omap_iommu_init); +/* must be ready before omap3isp is probed */ +subsys_initcall(omap_iommu_init); static void __exit omap_iommu_exit(void) { diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 40a8fbc07e4..70de277f5c1 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -24,12 +24,14 @@ #include <plat/irqs.h> #include <plat/sram.h> +#include <plat/omap-secure.h> #include <mach/hardware.h> #include <mach/omap-wakeupgen.h> #include "common.h" #include "omap4-sar-layout.h" +#include <linux/export.h> #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; @@ -43,6 +45,9 @@ static void __iomem *sar_ram_base; void __iomem *dram_sync, *sram_sync; +static phys_addr_t paddr; +static u32 size; + void omap_bus_sync(void) { if (dram_sync && sram_sync) { @@ -51,19 +56,22 @@ void omap_bus_sync(void) isb(); } } +EXPORT_SYMBOL(omap_bus_sync); -static int __init omap_barriers_init(void) +/* Steal one page physical memory for barrier implementation */ +int __init omap_barrier_reserve_memblock(void) { - struct map_desc dram_io_desc[1]; - phys_addr_t paddr; - u32 size; - - if (!cpu_is_omap44xx()) - return -ENODEV; size = ALIGN(PAGE_SIZE, SZ_1M); paddr = arm_memblock_steal(size, SZ_1M); + return 0; +} + +void __init omap_barriers_init(void) +{ + struct map_desc dram_io_desc[1]; + dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA; dram_io_desc[0].pfn = __phys_to_pfn(paddr); dram_io_desc[0].length = size; @@ -75,9 +83,10 @@ static int __init omap_barriers_init(void) pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n", (long long) paddr, dram_io_desc[0].virtual); - return 0; } -core_initcall(omap_barriers_init); +#else +void __init omap_barriers_init(void) +{} #endif void __init gic_init_irq(void) diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1881fe91514..5a65dd04aa3 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, freq = clk->rate; clk_put(clk); + rcu_read_lock(); opp = opp_find_freq_ceil(dev, &freq); if (IS_ERR(opp)) { + rcu_read_unlock(); pr_err("%s: unable to find boot up OPP for vdd_%s\n", __func__, vdd_name); goto exit; } bootup_volt = opp_get_voltage(opp); + rcu_read_unlock(); if (!bootup_volt) { pr_err("%s: unable to find voltage corresponding " "to the bootup OPP for vdd_%s\n", __func__, vdd_name); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 10b20c652e5..4b57757bf9d 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = { .constraints = { .min_uV = 3300000, .max_uV = 3300000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 771dc781b74..f51348dafaf 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) void __init usbhs_init(const struct usbhs_omap_board_data *pdata) { struct omap_hwmod *oh[2]; - struct omap_device *od; + struct platform_device *pdev; int bus_id = -1; int i; @@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) return; } - od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, + pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, (void *)&usbhs_data, sizeof(usbhs_data), omap_uhhtll_latency, ARRAY_SIZE(omap_uhhtll_latency), false); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { pr_err("Could not build hwmod devices %s,%s\n", USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME); return; diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index c005e2f5e38..57db2038b23 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP if (cpu_is_omap3630()) { omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; @@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void) omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; } +#endif if (cpu_is_omap3517() || cpu_is_omap3505()) voltdms = voltagedomains_am35xx; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 4e11d022595..c3115f6853d 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data; omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; +#endif for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) voltdm->sys_clk.name = sys_clk_name; diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 0d729e6619d..42d5cca6625 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int); #endif extern struct syscore_ops pxa_irq_syscore_ops; -extern struct syscore_ops pxa_gpio_syscore_ops; extern struct syscore_ops pxa2xx_mfp_syscore_ops; extern struct syscore_ops pxa3xx_mfp_syscore_ops; diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index fb9b62dcf4c..208eef1c048 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -45,6 +45,7 @@ #include <mach/hx4700.h> #include <mach/irda.h> +#include <sound/ak4641.h> #include <video/platform_lcd.h> #include <video/w100fb.h> @@ -765,6 +766,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = { }; /* + * Asahi Kasei AK4641 on I2C + */ + +static struct ak4641_platform_data ak4641_info = { + .gpio_power = GPIO27_HX4700_CODEC_ON, + .gpio_npdn = GPIO109_HX4700_CODEC_nPDN, +}; + +static struct i2c_board_info i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("ak4641", 0x12), + .platform_data = &ak4641_info, + }, +}; + +static struct platform_device audio = { + .name = "hx4700-audio", + .id = -1, +}; + + +/* * PCMCIA */ @@ -790,6 +813,7 @@ static struct platform_device *devices[] __initdata = { &gpio_vbus, &power_supply, &strataflash, + &audio, &pcmcia, }; @@ -827,6 +851,7 @@ static void __init hx4700_init(void) pxa_set_ficp_info(&ficp_info); pxa27x_set_i2c_power_info(NULL); pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info)); i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info)); pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info)); diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index f14775536b8..29b62afc6f7 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void) { int i; + /* running before pxa_gpio_probe() */ +#ifdef CONFIG_CPU_PXA26x + pxa_last_gpio = 89; +#else + pxa_last_gpio = 84; +#endif for (i = 0; i <= pxa_last_gpio; i++) gpio_desc[i].valid = 1; @@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void) { int i, gpio; + pxa_last_gpio = 120; /* running before pxa_gpio_probe() */ for (i = 0; i <= pxa_last_gpio; i++) { /* skip GPIO2, 5, 6, 7, 8, they are not * valid pins allow configuration diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 91e4f6c0376..3352b37b60c 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -25,7 +25,6 @@ #include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <asm/mach/map.h> #include <asm/suspend.h> @@ -209,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), }; static struct clk_lookup pxa25x_hwuart_clkreg = @@ -368,7 +368,6 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); ret = platform_add_devices(pxa25x_devices, diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index aed6cbcf386..6bce78edce7 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -22,7 +22,6 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/i2c/pxa-i2c.h> -#include <linux/gpio.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -230,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), }; #ifdef CONFIG_PM @@ -456,7 +456,6 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 4f402afa660..3918a672238 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -462,7 +462,6 @@ static int __init pxa3xx_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa3xx_mfp_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa3xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index d082a583df7..5ce434b95e8 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -283,7 +283,6 @@ static int __init pxa95x_init(void) return ret; register_syscore_ops(&pxa_irq_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa3xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index febc809ed5a..5aded5e6148 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -15,7 +15,6 @@ #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> #include <linux/mfd/88pm860x.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 8d5168d253a..30989baf7f2 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = { #define MAXCTRL_SEL_SH 4 #define MAXCTRL_STR (1u << 7) +extern int max1111_read_channel(int); /* * Read MAX1111 ADC */ @@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel) if (machine_is_tosa()) return 0; - extern int max1111_read_channel(int); - /* max1111 accepts channels from 0-3, however, * it is encoded from 0-7 here in the code. */ diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 34cbdac5152..438f02fe122 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm) static unsigned long spitz_charger_wakeup(void) { unsigned long ret; - ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT) + ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT) << GPIO_bit(SPITZ_GPIO_KEY_INT)) - | (!gpio_get_value(SPITZ_GPIO_SYNC) - << GPIO_bit(SPITZ_GPIO_SYNC)); + | gpio_get_value(SPITZ_GPIO_SYNC)); return ret; } diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h index db8a98ac68c..0c1eb1dfc53 100644 --- a/arch/arm/mach-s3c2440/common.h +++ b/arch/arm/mach-s3c2440/common.h @@ -12,6 +12,6 @@ #ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H #define __ARCH_ARM_MACH_S3C2440_COMMON_H -void s3c2440_restart(char mode, const char *cmd); +void s3c244x_restart(char mode, const char *cmd); #endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */ diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 24569550de1..19b577bc09b 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -487,5 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .init_machine = anubis_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index d6a9763110c..d7ae49c9011 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .init_machine = at2440evb_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 5859e609d28..9a4a5bc008e 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02") .init_irq = s3c24xx_init_irq, .init_machine = gta02_machine_init, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index adbbb85bc4c..5d66fb218a4 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440") .init_machine = mini2440_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 40eaf844bc1..5198e3e1c5b 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .init_machine = nexcoder_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 4c480ef734f..c5daeb612a8 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .init_irq = s3c24xx_init_irq, .init_machine = osiris_init, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 80077f6472e..6f68abf44fa 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .init_irq = s3c24xx_init_irq, .init_machine = rx1950_init_machine, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 20103bafbd4..56af3544759 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .init_irq = rx3715_init_irq, .init_machine = rx3715_init_machine, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index 1deb60d12a6..83a1036d7dc 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440") .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index 517623a09fc..2b3dddb49af 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -35,7 +35,6 @@ #include <plat/cpu.h> #include <plat/s3c244x.h> #include <plat/pm.h> -#include <plat/watchdog-reset.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -74,15 +73,3 @@ void __init s3c2440_map_io(void) s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; } - -void s3c2440_restart(char mode, const char *cmd) -{ - if (mode == 's') { - soft_restart(0); - } - - arch_wdt_reset(); - - /* we'll take a jump through zero as a poor second */ - soft_restart(0); -} diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c index 36bc60f61d0..d15852f642b 100644 --- a/arch/arm/mach-s3c2440/s3c244x.c +++ b/arch/arm/mach-s3c2440/s3c244x.c @@ -46,6 +46,7 @@ #include <plat/pm.h> #include <plat/pll.h> #include <plat/nand-core.h> +#include <plat/watchdog-reset.h> static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), @@ -196,3 +197,14 @@ struct syscore_ops s3c244x_pm_syscore_ops = { .suspend = s3c244x_suspend, .resume = s3c244x_resume, }; + +void s3c244x_restart(char mode, const char *cmd) +{ + if (mode == 's') + soft_restart(0); + + arch_wdt_reset(); + + /* we'll take a jump through zero as a poor second */ + soft_restart(0); +} diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index eff8a96c75e..bd7953b59a8 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -30,6 +30,7 @@ #include <linux/serial_sci.h> #include <linux/smsc911x.h> #include <linux/gpio.h> +#include <linux/videodev2.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/mmc/host.h> @@ -37,7 +38,7 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/sh_clk.h> -#include <linux/dma-mapping.h> +#include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> @@ -46,8 +47,6 @@ #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/traps.h> @@ -159,19 +158,12 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; static struct sh_mmcif_plat_data sh_mmcif_platdata = { .sup_pclk = 0, .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device mmc_device = { @@ -321,12 +313,11 @@ static struct resource mipidsi0_resources[] = { }, }; -#define DSI0PHYCR 0xe615006c static int sh_mipi_set_dot_clock(struct platform_device *pdev, void __iomem *base, int enable) { - struct clk *pck; + struct clk *pck, *phy; int ret; pck = clk_get(&pdev->dev, "dsip_clk"); @@ -335,18 +326,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev, goto sh_mipi_set_dot_clock_pck_err; } + phy = clk_get(&pdev->dev, "dsiphy_clk"); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + goto sh_mipi_set_dot_clock_phy_err; + } + if (enable) { clk_set_rate(pck, clk_round_rate(pck, 24000000)); - __raw_writel(0x2a809010, DSI0PHYCR); + clk_set_rate(phy, clk_round_rate(pck, 510000000)); clk_enable(pck); + clk_enable(phy); } else { clk_disable(pck); + clk_disable(phy); } ret = 0; + clk_put(phy); +sh_mipi_set_dot_clock_phy_err: clk_put(pck); - sh_mipi_set_dot_clock_pck_err: return ret; } @@ -485,27 +485,6 @@ static struct platform_device *ag5evm_devices[] __initdata = { &sdhi1_device, }; -static struct map_desc ag5evm_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init ag5evm_map_io(void) -{ - iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc)); - - /* setup early devices and console here as well */ - sh73a0_add_early_devices(); - shmobile_setup_console(); -} - static void __init ag5evm_init(void) { sh73a0_pinmux_init(); @@ -621,22 +600,12 @@ static void __init ag5evm_init(void) platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices)); } -static void __init ag5evm_timer_init(void) -{ - sh73a0_clock_init(); - shmobile_timer.init(); - return; -} - -struct sys_timer ag5evm_timer = { - .init = ag5evm_timer_init, -}; - MACHINE_START(AG5EVM, "ag5evm") - .map_io = ag5evm_map_io, + .map_io = sh73a0_map_io, + .init_early = sh73a0_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, .handle_irq = gic_handle_irq, .init_machine = ag5evm_init, - .timer = &ag5evm_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index aab0a349f75..4739f039650 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -61,8 +61,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> #include <asm/setup.h> /* @@ -295,15 +293,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -311,7 +300,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { @@ -802,7 +792,7 @@ static struct fsi_ak4642_info fsi2_ak4643_info = { static struct platform_device fsi_ak4643_device = { .name = "fsi-ak4642-audio", .dev = { - .platform_data = &fsi_info, + .platform_data = &fsi2_ak4643_info, }, }; @@ -1198,27 +1188,6 @@ static struct i2c_board_info i2c1_devices[] = { }, }; -static struct map_desc ap4evb_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init ap4evb_map_io(void) -{ - iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc)); - - /* setup early devices and console here as well */ - sh7372_add_early_devices(); - shmobile_setup_console(); -} - #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A #define USCCR1 0xE6058144 @@ -1227,6 +1196,9 @@ static void __init ap4evb_init(void) u32 srcr4; struct clk *clk; + /* External clock source */ + clk_set_rate(&sh7372_dv_clki_clk, 27000000); + sh7372_pinmux_init(); /* enable SCIFA0 */ @@ -1463,23 +1435,11 @@ static void __init ap4evb_init(void) pm_clk_add(&lcdc1_device.dev, "hdmi"); } -static void __init ap4evb_timer_init(void) -{ - sh7372_clock_init(); - shmobile_timer.init(); - - /* External clock source */ - clk_set_rate(&sh7372_dv_clki_clk, 27000000); -} - -static struct sys_timer ap4evb_timer = { - .init = ap4evb_timer_init, -}; - MACHINE_START(AP4EVB, "ap4evb") - .map_io = ap4evb_map_io, + .map_io = sh7372_map_io, + .init_early = sh7372_add_early_devices, .init_irq = sh7372_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = ap4evb_init, - .timer = &ap4evb_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c index 4d220162232..396814a6a2c 100644 --- a/arch/arm/mach-shmobile/board-bonito.c +++ b/arch/arm/mach-shmobile/board-bonito.c @@ -27,6 +27,7 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/smsc911x.h> +#include <linux/videodev2.h> #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -241,7 +242,7 @@ static struct sh_mobile_lcdc_info lcdc0_info = { .clock_source = LCDC_CLK_BUS, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = RGB24, .clock_divider = 5, .flags = 0, @@ -327,28 +328,6 @@ static struct platform_device *bonito_base_devices[] __initdata = { * map I/O */ static struct map_desc bonito_io_desc[] __initdata = { - /* - * for CPGA/INTC/PFC - * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 160 << 20, - .type = MT_DEVICE_NONSHARED - }, -#ifdef CONFIG_CACHE_L2X0 - /* - * for l2x0_init() - * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000 - */ - { - .virtual = 0xf0002000, - .pfn = __phys_to_pfn(0xf0100000), - .length = PAGE_SIZE, - .type = MT_DEVICE_NONSHARED - }, -#endif /* * for FPGA (0x1800000-0x19ffffff) * 0x18000000-0x18002000 -> 0xf0003000-0xf0005000 @@ -363,11 +342,8 @@ static struct map_desc bonito_io_desc[] __initdata = { static void __init bonito_map_io(void) { + r8a7740_map_io(); iotable_init(bonito_io_desc, ARRAY_SIZE(bonito_io_desc)); - - /* setup early devices and console here as well */ - r8a7740_add_early_devices(); - shmobile_setup_console(); } /* @@ -491,7 +467,7 @@ static void __init bonito_init(void) } } -static void __init bonito_timer_init(void) +static void __init bonito_earlytimer_init(void) { u16 val; u8 md_ck = 0; @@ -506,17 +482,22 @@ static void __init bonito_timer_init(void) md_ck |= MD_CK0; r8a7740_clock_init(md_ck); - shmobile_timer.init(); + shmobile_earlytimer_init(); } -struct sys_timer bonito_timer = { - .init = bonito_timer_init, -}; +void __init bonito_add_early_devices(void) +{ + r8a7740_add_early_devices(); + + /* override timer setup with board-specific code */ + shmobile_timer.init = bonito_earlytimer_init; +} MACHINE_START(BONITO, "bonito") .map_io = bonito_map_io, + .init_early = bonito_add_early_devices, .init_irq = r8a7740_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = bonito_init, - .timer = &bonito_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c index 72d557281b1..b627e89037f 100644 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ b/arch/arm/mach-shmobile/board-g3evm.c @@ -37,8 +37,6 @@ #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> /* * IrDA @@ -246,27 +244,6 @@ static struct platform_device *g3evm_devices[] __initdata = { &irda_device, }; -static struct map_desc g3evm_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init g3evm_map_io(void) -{ - iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc)); - - /* setup early devices and console here as well */ - sh7367_add_early_devices(); - shmobile_setup_console(); -} - static void __init g3evm_init(void) { sh7367_pinmux_init(); @@ -354,20 +331,11 @@ static void __init g3evm_init(void) platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices)); } -static void __init g3evm_timer_init(void) -{ - sh7367_clock_init(); - shmobile_timer.init(); -} - -static struct sys_timer g3evm_timer = { - .init = g3evm_timer_init, -}; - MACHINE_START(G3EVM, "g3evm") - .map_io = g3evm_map_io, + .map_io = sh7367_map_io, + .init_early = sh7367_add_early_devices, .init_irq = sh7367_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = g3evm_init, - .timer = &g3evm_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index 2220b885cff..46d757d2759 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -38,8 +38,6 @@ #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> /* * SDHI @@ -260,27 +258,6 @@ static struct platform_device *g4evm_devices[] __initdata = { &sdhi1_device, }; -static struct map_desc g4evm_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init g4evm_map_io(void) -{ - iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc)); - - /* setup early devices and console here as well */ - sh7377_add_early_devices(); - shmobile_setup_console(); -} - #define GPIO_SDHID0_D0 0xe60520fc #define GPIO_SDHID0_D1 0xe60520fd #define GPIO_SDHID0_D2 0xe60520fe @@ -397,20 +374,11 @@ static void __init g4evm_init(void) platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices)); } -static void __init g4evm_timer_init(void) -{ - sh7377_clock_init(); - shmobile_timer.init(); -} - -static struct sys_timer g4evm_timer = { - .init = g4evm_timer_init, -}; - MACHINE_START(G4EVM, "g4evm") - .map_io = g4evm_map_io, + .map_io = sh7377_map_io, + .init_early = sh7377_add_early_devices, .init_irq = sh7377_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = g4evm_init, - .timer = &g4evm_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 857ceeec1bb..61c06729466 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -43,7 +43,6 @@ #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> @@ -143,11 +142,10 @@ static struct gpio_keys_button gpio_buttons[] = { static struct gpio_keys_platform_data gpio_key_info = { .buttons = gpio_buttons, .nbuttons = ARRAY_SIZE(gpio_buttons), - .poll_interval = 250, /* polled for now */ }; static struct platform_device gpio_keys_device = { - .name = "gpio-keys-polled", /* polled for now */ + .name = "gpio-keys", .id = -1, .dev = { .platform_data = &gpio_key_info, @@ -410,27 +408,6 @@ static struct platform_device *kota2_devices[] __initdata = { &sdhi1_device, }; -static struct map_desc kota2_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init kota2_map_io(void) -{ - iotable_init(kota2_io_desc, ARRAY_SIZE(kota2_io_desc)); - - /* setup early devices and console here as well */ - sh73a0_add_early_devices(); - shmobile_setup_console(); -} - static void __init kota2_init(void) { sh73a0_pinmux_init(); @@ -536,22 +513,12 @@ static void __init kota2_init(void) platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices)); } -static void __init kota2_timer_init(void) -{ - sh73a0_clock_init(); - shmobile_timer.init(); - return; -} - -struct sys_timer kota2_timer = { - .init = kota2_timer_init, -}; - MACHINE_START(KOTA2, "kota2") - .map_io = kota2_map_io, + .map_io = sh73a0_map_io, + .init_early = sh73a0_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, .handle_irq = gic_handle_irq, .init_machine = kota2_init, - .timer = &kota2_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd10f8..71d27915047 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -43,7 +43,6 @@ #include <linux/smsc911x.h> #include <linux/sh_intc.h> #include <linux/tca6416_keypad.h> -#include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> #include <linux/dma-mapping.h> @@ -58,8 +57,6 @@ #include <mach/sh7372.h> #include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> #include <asm/mach-types.h> /* @@ -145,11 +142,6 @@ * 1-2 short | VBUS 5V | Host * open | external VBUS | Function * - * *1 - * CN31 is used as - * CONFIG_USB_R8A66597_HCD Host - * CONFIG_USB_RENESAS_USBHS Function - * * CAUTION * * renesas_usbhs driver can use external interrupt mode @@ -161,15 +153,6 @@ * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", * because Touchscreen is using IRQ7-PORT40. * It is impossible to use IRQ7 demux on this board. - * - * We can use external interrupt mode USB-Function on "USB1". - * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. - * But don't select both drivers in same time. - * These uses same IRQ number for request_irq(), and aren't supporting - * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. - * - * Actually these are old/new version of USB driver. - * This mean its register will be broken if it supports shared IRQ, */ /* @@ -208,6 +191,16 @@ */ /* + * FSI - AK4642 + * + * it needs amixer settings for playing + * + * amixer set "Headphone" on + * amixer set "HPOUTL Mixer DACH" on + * amixer set "HPOUTR Mixer DACH" on + */ + +/* * FIXME !! * * gpio_no_direction @@ -676,51 +669,16 @@ static struct platform_device usbhs0_device = { * Use J30 to select between Host and Function. This setting * can however not be detected by software. Hotplug of USBHS1 * is provided via IRQ8. + * + * Current USB1 works as "USB Host". + * - set J30 "short" + * + * If you want to use it as "USB gadget", + * - J30 "open" + * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET + * - add .get_vbus = usbhs_get_vbus in usbhs1_private */ #define IRQ8 evt2irq(0x0300) - -/* USBHS1 USB Host support via r8a66597_hcd */ -static void usb1_host_port_power(int port, int power) -{ - if (!power) /* only power-on is supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ - __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); -} - -static struct r8a66597_platdata usb1_host_data = { - .on_chip = 1, - .port_power = usb1_host_port_power, -}; - -static struct resource usb1_host_resources[] = { - [0] = { - .name = "USBHS1", - .start = 0xe68b0000, - .end = 0xe68b00e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb1_host_device = { - .name = "r8a66597_hcd", - .id = 1, - .dev = { - .dma_mask = NULL, /* not use dma */ - .coherent_dma_mask = 0xffffffff, - .platform_data = &usb1_host_data, - }, - .num_resources = ARRAY_SIZE(usb1_host_resources), - .resource = usb1_host_resources, -}; - -/* USBHS1 USB Function support via renesas_usbhs */ - #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) @@ -776,7 +734,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) static int usbhs1_get_id(struct platform_device *pdev) { - return USBHS_GADGET; + return USBHS_HOST; } static u32 usbhs1_pipe_cfg[] = { @@ -807,7 +765,6 @@ static struct usbhs_private usbhs1_private = { .hardware_exit = usbhs1_hardware_exit, .get_id = usbhs1_get_id, .phy_reset = usbhs_phy_reset, - .get_vbus = usbhs_get_vbus, }, .driver_param = { .buswait_bwait = 4, @@ -1184,15 +1141,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -1200,7 +1148,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { @@ -1311,7 +1260,6 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usb1_host_device, &usbhs1_device, &usbhs0_device, &leds_device, @@ -1387,25 +1335,13 @@ static struct i2c_board_info i2c1_devices[] = { }, }; -static struct map_desc mackerel_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - static void __init mackerel_map_io(void) { - iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc)); - - /* setup early devices and console here as well */ - sh7372_add_early_devices(); - shmobile_setup_console(); + sh7372_map_io(); + /* DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't + * enough to allocate the frame buffer memory. + */ + init_consistent_dma_size(12 << 20); } #define GPIO_PORT9CR 0xE6051009 @@ -1420,6 +1356,9 @@ static void __init mackerel_init(void) struct clk *clk; int ret; + /* External clock source */ + clk_set_rate(&sh7372_dv_clki_clk, 27000000); + sh7372_pinmux_init(); /* enable SCIFA0 */ @@ -1473,9 +1412,6 @@ static void __init mackerel_init(void) gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* USB phy tweak to make the r8a66597_hcd host driver work */ - __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ - /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); @@ -1626,23 +1562,11 @@ static void __init mackerel_init(void) pm_clk_add(&hdmi_lcdc_device.dev, "hdmi"); } -static void __init mackerel_timer_init(void) -{ - sh7372_clock_init(); - shmobile_timer.init(); - - /* External clock source */ - clk_set_rate(&sh7372_dv_clki_clk, 27000000); -} - -static struct sys_timer mackerel_timer = { - .init = mackerel_timer_init, -}; - MACHINE_START(MACKEREL, "mackerel") .map_io = mackerel_map_io, + .init_early = sh7372_add_early_devices, .init_irq = sh7372_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = mackerel_init, - .timer = &mackerel_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index f0e02c0ce99..cbd5e4cd06d 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -33,8 +33,6 @@ #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> #include <asm/hardware/gic.h> #include <asm/traps.h> @@ -72,49 +70,6 @@ static struct platform_device *marzen_devices[] __initdata = { ð_device, }; -static struct map_desc marzen_io_desc[] __initdata = { - /* 2M entity map for 0xf0000000 (MPCORE) */ - { - .virtual = 0xf0000000, - .pfn = __phys_to_pfn(0xf0000000), - .length = SZ_2M, - .type = MT_DEVICE_NONSHARED - }, - /* 16M entity map for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */ - { - .virtual = 0xfe000000, - .pfn = __phys_to_pfn(0xfe000000), - .length = SZ_16M, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init marzen_map_io(void) -{ - iotable_init(marzen_io_desc, ARRAY_SIZE(marzen_io_desc)); -} - -static void __init marzen_init_early(void) -{ - r8a7779_add_early_devices(); - - /* Early serial console setup is not included here due to - * memory map collisions. The SCIF serial ports in r8a7779 - * are difficult to entity map 1:1 due to collision with the - * virtual memory range used by the coherent DMA code on ARM. - * - * Anyone wanting to debug early can remove UPF_IOREMAP from - * the sh-sci serial console platform data, adjust mapbase - * to a static M:N virt:phys mapping that needs to be added to - * the mappings passed with iotable_init() above. - * - * Then add a call to shmobile_setup_console() from this function. - * - * As a final step pass earlyprint=sh-sci.2,115200 on the kernel - * command line. - */ -} - static void __init marzen_init(void) { r8a7779_pinmux_init(); @@ -135,23 +90,12 @@ static void __init marzen_init(void) platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices)); } -static void __init marzen_timer_init(void) -{ - r8a7779_clock_init(); - shmobile_timer.init(); - return; -} - -struct sys_timer marzen_timer = { - .init = marzen_timer_init, -}; - MACHINE_START(MARZEN, "marzen") - .map_io = marzen_map_io, - .init_early = marzen_init_early, + .map_io = r8a7779_map_io, + .init_early = r8a7779_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, .init_irq = r8a7779_init_irq, .handle_irq = gic_handle_irq, .init_machine = marzen_init, - .timer = &marzen_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 3b35b9afc00..99c4d743a99 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -93,7 +93,7 @@ static unsigned long div_recalc(struct clk *clk) return clk->parent->rate / (int)(clk->priv); } -static struct clk_ops div_clk_ops = { +static struct sh_clk_ops div_clk_ops = { .recalc = div_recalc, }; @@ -125,7 +125,7 @@ static struct clk extal2_div2_clk = { .parent = &extal2_clk, }; -static struct clk_ops followparent_clk_ops = { +static struct sh_clk_ops followparent_clk_ops = { .recalc = followparent_recalc, }; @@ -156,7 +156,7 @@ static unsigned long pllc01_recalc(struct clk *clk) return clk->parent->rate * mult; } -static struct clk_ops pllc01_clk_ops = { +static struct sh_clk_ops pllc01_clk_ops = { .recalc = pllc01_recalc, }; @@ -376,7 +376,7 @@ void __init r8a7740_clock_init(u8 md_ck) clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) - clk_init(); + shmobile_clk_init(); else panic("failed to setup r8a7740 clocks\n"); } diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index b4b0e8cd096..7d6e9fe47b5 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -107,7 +107,7 @@ static unsigned long mul4_recalc(struct clk *clk) return clk->parent->rate * 4; } -static struct clk_ops mul4_clk_ops = { +static struct sh_clk_ops mul4_clk_ops = { .recalc = mul4_recalc, }; @@ -170,7 +170,7 @@ void __init r8a7779_clock_init(void) clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) - clk_init(); + shmobile_clk_init(); else panic("failed to setup r8a7779 clocks\n"); } diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c index 5218c34a9cc..006e7b5d304 100644 --- a/arch/arm/mach-shmobile/clock-sh7367.c +++ b/arch/arm/mach-shmobile/clock-sh7367.c @@ -74,7 +74,7 @@ static unsigned long div2_recalc(struct clk *clk) return clk->parent->rate / 2; } -static struct clk_ops div2_clk_ops = { +static struct sh_clk_ops div2_clk_ops = { .recalc = div2_recalc, }; @@ -101,7 +101,7 @@ static unsigned long pllc1_recalc(struct clk *clk) return clk->parent->rate * mult; } -static struct clk_ops pllc1_clk_ops = { +static struct sh_clk_ops pllc1_clk_ops = { .recalc = pllc1_recalc, }; @@ -128,7 +128,7 @@ static unsigned long pllc2_recalc(struct clk *clk) return clk->parent->rate * mult; } -static struct clk_ops pllc2_clk_ops = { +static struct sh_clk_ops pllc2_clk_ops = { .recalc = pllc2_recalc, }; @@ -349,7 +349,7 @@ void __init sh7367_clock_init(void) clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) - clk_init(); + shmobile_clk_init(); else panic("failed to setup sh7367 clocks\n"); } diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 293456d8dcf..de243e3c839 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -89,7 +89,7 @@ static unsigned long div2_recalc(struct clk *clk) return clk->parent->rate / 2; } -static struct clk_ops div2_clk_ops = { +static struct sh_clk_ops div2_clk_ops = { .recalc = div2_recalc, }; @@ -128,7 +128,7 @@ static unsigned long pllc01_recalc(struct clk *clk) return clk->parent->rate * mult; } -static struct clk_ops pllc01_clk_ops = { +static struct sh_clk_ops pllc01_clk_ops = { .recalc = pllc01_recalc, }; @@ -276,7 +276,7 @@ static int pllc2_set_parent(struct clk *clk, struct clk *parent) return 0; } -static struct clk_ops pllc2_clk_ops = { +static struct sh_clk_ops pllc2_clk_ops = { .recalc = pllc2_recalc, .round_rate = pllc2_round_rate, .set_rate = pllc2_set_rate, @@ -468,7 +468,7 @@ static int fsidiv_set_rate(struct clk *clk, unsigned long rate) return 0; } -static struct clk_ops fsidiv_clk_ops = { +static struct sh_clk_ops fsidiv_clk_ops = { .recalc = fsidiv_recalc, .round_rate = fsidiv_round_rate, .set_rate = fsidiv_set_rate, @@ -710,7 +710,7 @@ void __init sh7372_clock_init(void) clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) - clk_init(); + shmobile_clk_init(); else panic("failed to setup sh7372 clocks\n"); diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c index 8cee7b151ae..0798a15936c 100644 --- a/arch/arm/mach-shmobile/clock-sh7377.c +++ b/arch/arm/mach-shmobile/clock-sh7377.c @@ -77,7 +77,7 @@ static unsigned long div2_recalc(struct clk *clk) return clk->parent->rate / 2; } -static struct clk_ops div2_clk_ops = { +static struct sh_clk_ops div2_clk_ops = { .recalc = div2_recalc, }; @@ -110,7 +110,7 @@ static unsigned long pllc1_recalc(struct clk *clk) return clk->parent->rate * mult; } -static struct clk_ops pllc1_clk_ops = { +static struct sh_clk_ops pllc1_clk_ops = { .recalc = pllc1_recalc, }; @@ -137,7 +137,7 @@ static unsigned long pllc2_recalc(struct clk *clk) return clk->parent->rate * mult; } -static struct clk_ops pllc2_clk_ops = { +static struct sh_clk_ops pllc2_clk_ops = { .recalc = pllc2_recalc, }; @@ -360,7 +360,7 @@ void __init sh7377_clock_init(void) clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) - clk_init(); + shmobile_clk_init(); else panic("failed to setup sh7377 clocks\n"); } diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index afbead6a6e1..472d1f5361e 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -88,7 +88,7 @@ static unsigned long div2_recalc(struct clk *clk) return clk->parent->rate / 2; } -static struct clk_ops div2_clk_ops = { +static struct sh_clk_ops div2_clk_ops = { .recalc = div2_recalc, }; @@ -97,7 +97,7 @@ static unsigned long div7_recalc(struct clk *clk) return clk->parent->rate / 7; } -static struct clk_ops div7_clk_ops = { +static struct sh_clk_ops div7_clk_ops = { .recalc = div7_recalc, }; @@ -106,7 +106,7 @@ static unsigned long div13_recalc(struct clk *clk) return clk->parent->rate / 13; } -static struct clk_ops div13_clk_ops = { +static struct sh_clk_ops div13_clk_ops = { .recalc = div13_recalc, }; @@ -122,7 +122,7 @@ static struct clk extal2_div2_clk = { .parent = &sh73a0_extal2_clk, }; -static struct clk_ops main_clk_ops = { +static struct sh_clk_ops main_clk_ops = { .recalc = followparent_recalc, }; @@ -156,7 +156,7 @@ static unsigned long pll_recalc(struct clk *clk) return clk->parent->rate * mult; } -static struct clk_ops pll_clk_ops = { +static struct sh_clk_ops pll_clk_ops = { .recalc = pll_recalc, }; @@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = { dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3), }; +/* DSI DIV */ +static unsigned long dsiphy_recalc(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + + /* FIXME */ + if (!(value & 0x000B8000)) + return clk->parent->rate; + + value &= 0x3f; + value += 1; + + if ((value < 12) || + (value > 33)) { + pr_err("DSIPHY has wrong value (%d)", value); + return 0; + } + + return clk->parent->rate / value; +} + +static long dsiphy_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_mult_range_round(clk, 12, 33, rate); +} + +static void dsiphy_disable(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + value &= ~0x000B8000; + + __raw_writel(value , clk->mapping->base); +} + +static int dsiphy_enable(struct clk *clk) +{ + u32 value; + int multi; + + value = __raw_readl(clk->mapping->base); + multi = (value & 0x3f) + 1; + + if ((multi < 12) || (multi > 33)) + return -EIO; + + __raw_writel(value | 0x000B8000, clk->mapping->base); + + return 0; +} + +static int dsiphy_set_rate(struct clk *clk, unsigned long rate) +{ + u32 value; + int idx; + + idx = rate / clk->parent->rate; + if ((idx < 12) || (idx > 33)) + return -EINVAL; + + idx += -1; + + value = __raw_readl(clk->mapping->base); + value = (value & ~0x3f) + idx; + + __raw_writel(value, clk->mapping->base); + + return 0; +} + +static struct sh_clk_ops dsiphy_clk_ops = { + .recalc = dsiphy_recalc, + .round_rate = dsiphy_round_rate, + .set_rate = dsiphy_set_rate, + .enable = dsiphy_enable, + .disable = dsiphy_disable, +}; + +static struct clk_mapping dsi0phy_clk_mapping = { + .phys = DSI0PHYCR, + .len = 4, +}; + +static struct clk_mapping dsi1phy_clk_mapping = { + .phys = DSI1PHYCR, + .len = 4, +}; + +static struct clk dsi0phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI0P], /* late install */ + .mapping = &dsi0phy_clk_mapping, +}; + +static struct clk dsi1phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI1P], /* late install */ + .mapping = &dsi1phy_clk_mapping, +}; + +static struct clk *late_main_clks[] = { + &dsi0phy_clk, + &dsi1phy_clk, +}; + enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, MSTP219, @@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ @@ -504,10 +614,13 @@ void __init sh73a0_clock_init(void) if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) - clk_init(); + shmobile_clk_init(); else panic("failed to setup sh73a0 clocks\n"); } diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c index 31654d78b96..e816ca9bd21 100644 --- a/arch/arm/mach-shmobile/clock.c +++ b/arch/arm/mach-shmobile/clock.c @@ -24,7 +24,7 @@ #include <linux/sh_clk.h> #include <linux/export.h> -int __init clk_init(void) +int __init shmobile_clk_init(void) { /* Kick the child clocks.. */ recalculate_root_clocks(); diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 9fde3eb686a..83ad3fe0a75 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -1,6 +1,7 @@ #ifndef __ARCH_MACH_COMMON_H #define __ARCH_MACH_COMMON_H +extern void shmobile_earlytimer_init(void); extern struct sys_timer shmobile_timer; struct twd_local_timer; void shmobile_twd_init(struct twd_local_timer *twd_local_timer); @@ -8,7 +9,7 @@ extern void shmobile_setup_console(void); extern void shmobile_secondary_vector(void); extern int shmobile_platform_cpu_kill(unsigned int cpu); struct clk; -extern int clk_init(void); +extern int shmobile_clk_init(void); extern void shmobile_handle_irq_intc(struct pt_regs *); extern struct platform_suspend_ops shmobile_suspend_ops; struct cpuidle_driver; @@ -16,6 +17,7 @@ extern void (*shmobile_cpuidle_modes[])(void); extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv); extern void sh7367_init_irq(void); +extern void sh7367_map_io(void); extern void sh7367_add_early_devices(void); extern void sh7367_add_standard_devices(void); extern void sh7367_clock_init(void); @@ -24,6 +26,7 @@ extern struct clk sh7367_extalb1_clk; extern struct clk sh7367_extal2_clk; extern void sh7377_init_irq(void); +extern void sh7377_map_io(void); extern void sh7377_add_early_devices(void); extern void sh7377_add_standard_devices(void); extern void sh7377_clock_init(void); @@ -32,6 +35,7 @@ extern struct clk sh7377_extalc1_clk; extern struct clk sh7377_extal2_clk; extern void sh7372_init_irq(void); +extern void sh7372_map_io(void); extern void sh7372_add_early_devices(void); extern void sh7372_add_standard_devices(void); extern void sh7372_clock_init(void); @@ -43,6 +47,7 @@ extern struct clk sh7372_extal1_clk; extern struct clk sh7372_extal2_clk; extern void sh73a0_init_irq(void); +extern void sh73a0_map_io(void); extern void sh73a0_add_early_devices(void); extern void sh73a0_add_standard_devices(void); extern void sh73a0_clock_init(void); @@ -58,12 +63,14 @@ extern int sh73a0_boot_secondary(unsigned int cpu); extern void sh73a0_smp_prepare_cpus(void); extern void r8a7740_init_irq(void); +extern void r8a7740_map_io(void); extern void r8a7740_add_early_devices(void); extern void r8a7740_add_standard_devices(void); extern void r8a7740_clock_init(u8 md_ck); extern void r8a7740_pinmux_init(void); extern void r8a7779_init_irq(void); +extern void r8a7779_map_io(void); extern void r8a7779_add_early_devices(void); extern void r8a7779_add_standard_devices(void); extern void r8a7779_clock_init(void); diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 881d515a968..cad57578cee 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -515,8 +515,8 @@ enum { SHDMA_SLAVE_MMCIF_RX, }; -/* PINT interrupts are located at Linux IRQ 768 and up */ -#define SH73A0_PINT0_IRQ(irq) ((irq) + 768) -#define SH73A0_PINT1_IRQ(irq) ((irq) + 800) +/* PINT interrupts are located at Linux IRQ 800 and up */ +#define SH73A0_PINT0_IRQ(irq) ((irq) + 800) +#define SH73A0_PINT1_IRQ(irq) ((irq) + 832) #endif /* __ASM_SH73A0_H__ */ diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 1eda6b0b69e..9857595eaa7 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/sh_intc.h> @@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void) setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); + WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n); irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, handle_level_irq, "level"); set_irq_flags(n, IRQF_VALID); /* yuck */ diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c index 963532f2b2c..d14c9b04807 100644 --- a/arch/arm/mach-shmobile/pfc-r8a7779.c +++ b/arch/arm/mach-shmobile/pfc-r8a7779.c @@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { FN_AUDATA3, 0, 0, 0 } }, { PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32, - 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, + 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1, 1, 1, 1, 3, 3, 3, 2) { /* IP4_31_29 [3] */ FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0, diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c index 1bd6585a6ac..336093f9210 100644 --- a/arch/arm/mach-shmobile/pfc-sh7372.c +++ b/arch/arm/mach-shmobile/pfc-sh7372.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/gpio.h> +#include <mach/irqs.h> #include <mach/sh7372.h> #define CPU_ALL_PORT(fn, pfx, sfx) \ @@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; +#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5)) +#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5)) +static struct pinmux_irq pinmux_irqs[] = { + PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0), + PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0), + PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0), + PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0), + PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0), + PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0), + PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0), + PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0), + PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0), + PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0), + PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0), + PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0), + PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0), + PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0), + PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0), + PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0), + PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0), + PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0), + PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0), + PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0), + PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0), + PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0), + PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0), + PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0), + PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0), + PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0), + PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0), + PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0), + PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0), + PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0), + PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0), + PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0), +}; + static struct pinmux_info sh7372_pinmux_info = { .name = "sh7372_pfc", .reserved_id = PINMUX_RESERVED, @@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = { .gpio_data = pinmux_data, .gpio_data_size = ARRAY_SIZE(pinmux_data), + + .gpio_irq = pinmux_irqs, + .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), }; void sh7372_pinmux_init(void) diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 986dca6b3fa..74e52341dd1 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -25,8 +25,41 @@ #include <linux/serial_sci.h> #include <linux/sh_timer.h> #include <mach/r8a7740.h> +#include <mach/common.h> #include <asm/mach-types.h> +#include <asm/mach/map.h> #include <asm/mach/arch.h> +#include <asm/mach/time.h> + +static struct map_desc r8a7740_io_desc[] __initdata = { + /* + * for CPGA/INTC/PFC + * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 160 << 20, + .type = MT_DEVICE_NONSHARED + }, +#ifdef CONFIG_CACHE_L2X0 + /* + * for l2x0_init() + * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000 + */ + { + .virtual = 0xf0002000, + .pfn = __phys_to_pfn(0xf0100000), + .length = PAGE_SIZE, + .type = MT_DEVICE_NONSHARED + }, +#endif +}; + +void __init r8a7740_map_io(void) +{ + iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc)); +} /* SCIFA0 */ static struct plat_sci_port scif0_platform_data = { @@ -345,8 +378,20 @@ void __init r8a7740_add_standard_devices(void) ARRAY_SIZE(r8a7740_late_devices)); } +static void __init r8a7740_earlytimer_init(void) +{ + r8a7740_clock_init(0); + shmobile_earlytimer_init(); +} + void __init r8a7740_add_early_devices(void) { early_platform_add_devices(r8a7740_early_devices, ARRAY_SIZE(r8a7740_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); + + /* override timer setup with soc-specific code */ + shmobile_timer.init = r8a7740_earlytimer_init; } diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 4725663bd03..6820d785493 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -33,6 +33,31 @@ #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <asm/hardware/cache-l2x0.h> + +static struct map_desc r8a7779_io_desc[] __initdata = { + /* 2M entity map for 0xf0000000 (MPCORE) */ + { + .virtual = 0xf0000000, + .pfn = __phys_to_pfn(0xf0000000), + .length = SZ_2M, + .type = MT_DEVICE_NONSHARED + }, + /* 16M entity map for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */ + { + .virtual = 0xfe000000, + .pfn = __phys_to_pfn(0xfe000000), + .length = SZ_16M, + .type = MT_DEVICE_NONSHARED + }, +}; + +void __init r8a7779_map_io(void) +{ + iotable_init(r8a7779_io_desc, ARRAY_SIZE(r8a7779_io_desc)); +} static struct plat_sci_port scif0_platform_data = { .mapbase = 0xffe40000, @@ -219,6 +244,10 @@ static struct platform_device *r8a7779_late_devices[] __initdata = { void __init r8a7779_add_standard_devices(void) { +#ifdef CONFIG_CACHE_L2X0 + /* Early BRESP enable, Shared attribute override enable, 64K*16way */ + l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff); +#endif r8a7779_pm_init(); r8a7779_init_pm_domain(&r8a7779_sh4a); @@ -232,8 +261,33 @@ void __init r8a7779_add_standard_devices(void) ARRAY_SIZE(r8a7779_late_devices)); } +static void __init r8a7779_earlytimer_init(void) +{ + r8a7779_clock_init(); + shmobile_earlytimer_init(); +} + void __init r8a7779_add_early_devices(void) { early_platform_add_devices(r8a7779_early_devices, ARRAY_SIZE(r8a7779_early_devices)); + + /* Early serial console setup is not included here due to + * memory map collisions. The SCIF serial ports in r8a7779 + * are difficult to entity map 1:1 due to collision with the + * virtual memory range used by the coherent DMA code on ARM. + * + * Anyone wanting to debug early can remove UPF_IOREMAP from + * the sh-sci serial console platform data, adjust mapbase + * to a static M:N virt:phys mapping that needs to be added to + * the mappings passed with iotable_init() above. + * + * Then add a call to shmobile_setup_console() from this function. + * + * As a final step pass earlyprint=sh-sci.2,115200 on the kernel + * command line in case of the marzen board. + */ + + /* override timer setup with soc-specific code */ + shmobile_timer.init = r8a7779_earlytimer_init; } diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c index e546017f15d..a51e1a1e699 100644 --- a/arch/arm/mach-shmobile/setup-sh7367.c +++ b/arch/arm/mach-shmobile/setup-sh7367.c @@ -29,8 +29,28 @@ #include <linux/serial_sci.h> #include <linux/sh_timer.h> #include <mach/hardware.h> +#include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +static struct map_desc sh7367_io_desc[] __initdata = { + /* create a 1:1 entity map for 0xe6xxxxxx + * used by CPGA, INTC and PFC. + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 256 << 20, + .type = MT_DEVICE_NONSHARED + }, +}; + +void __init sh7367_map_io(void) +{ + iotable_init(sh7367_io_desc, ARRAY_SIZE(sh7367_io_desc)); +} /* SCIFA0 */ static struct plat_sci_port scif0_platform_data = { @@ -435,6 +455,12 @@ void __init sh7367_add_standard_devices(void) ARRAY_SIZE(sh7367_devices)); } +static void __init sh7367_earlytimer_init(void) +{ + sh7367_clock_init(); + shmobile_earlytimer_init(); +} + #define SYMSTPCR2 0xe6158048 #define SYMSTPCR2_CMT1 (1 << 29) @@ -445,4 +471,10 @@ void __init sh7367_add_early_devices(void) early_platform_add_devices(sh7367_early_devices, ARRAY_SIZE(sh7367_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); + + /* override timer setup with soc-specific code */ + shmobile_timer.init = sh7367_earlytimer_init; } diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index a83cf51fc09..c14fb35de47 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -33,8 +33,28 @@ #include <linux/pm_domain.h> #include <mach/hardware.h> #include <mach/sh7372.h> +#include <mach/common.h> +#include <asm/mach/map.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/mach/time.h> + +static struct map_desc sh7372_io_desc[] __initdata = { + /* create a 1:1 entity map for 0xe6xxxxxx + * used by CPGA, INTC and PFC. + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 256 << 20, + .type = MT_DEVICE_NONSHARED + }, +}; + +void __init sh7372_map_io(void) +{ + iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc)); +} /* SCIFA0 */ static struct plat_sci_port scif0_platform_data = { @@ -1045,8 +1065,20 @@ void __init sh7372_add_standard_devices(void) sh7372_add_device_to_domain(&sh7372_a4r, &jpu_device); } +static void __init sh7372_earlytimer_init(void) +{ + sh7372_clock_init(); + shmobile_earlytimer_init(); +} + void __init sh7372_add_early_devices(void) { early_platform_add_devices(sh7372_early_devices, ARRAY_SIZE(sh7372_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); + + /* override timer setup with soc-specific code */ + shmobile_timer.init = sh7372_earlytimer_init; } diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c index bb405b8e459..9f146095098 100644 --- a/arch/arm/mach-shmobile/setup-sh7377.c +++ b/arch/arm/mach-shmobile/setup-sh7377.c @@ -30,8 +30,28 @@ #include <linux/sh_intc.h> #include <linux/sh_timer.h> #include <mach/hardware.h> +#include <mach/common.h> +#include <asm/mach/map.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/mach/time.h> + +static struct map_desc sh7377_io_desc[] __initdata = { + /* create a 1:1 entity map for 0xe6xxxxxx + * used by CPGA, INTC and PFC. + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 256 << 20, + .type = MT_DEVICE_NONSHARED + }, +}; + +void __init sh7377_map_io(void) +{ + iotable_init(sh7377_io_desc, ARRAY_SIZE(sh7377_io_desc)); +} /* SCIFA0 */ static struct plat_sci_port scif0_platform_data = { @@ -456,6 +476,12 @@ void __init sh7377_add_standard_devices(void) ARRAY_SIZE(sh7377_devices)); } +static void __init sh7377_earlytimer_init(void) +{ + sh7377_clock_init(); + shmobile_earlytimer_init(); +} + #define SMSTPCR3 0xe615013c #define SMSTPCR3_CMT1 (1 << 29) @@ -466,4 +492,10 @@ void __init sh7377_add_early_devices(void) early_platform_add_devices(sh7377_early_devices, ARRAY_SIZE(sh7377_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); + + /* override timer setup with soc-specific code */ + shmobile_timer.init = sh7377_earlytimer_init; } diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 20e71e5cace..b6a0734a738 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -32,8 +32,28 @@ #include <linux/sh_timer.h> #include <mach/hardware.h> #include <mach/sh73a0.h> +#include <mach/common.h> #include <asm/mach-types.h> +#include <asm/mach/map.h> #include <asm/mach/arch.h> +#include <asm/mach/time.h> + +static struct map_desc sh73a0_io_desc[] __initdata = { + /* create a 1:1 entity map for 0xe6xxxxxx + * used by CPGA, INTC and PFC. + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 256 << 20, + .type = MT_DEVICE_NONSHARED + }, +}; + +void __init sh73a0_map_io(void) +{ + iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc)); +} static struct plat_sci_port scif0_platform_data = { .mapbase = 0xe6c40000, @@ -667,8 +687,20 @@ void __init sh73a0_add_standard_devices(void) ARRAY_SIZE(sh73a0_late_devices)); } +static void __init sh73a0_earlytimer_init(void) +{ + sh73a0_clock_init(); + shmobile_earlytimer_init(); +} + void __init sh73a0_add_early_devices(void) { early_platform_add_devices(sh73a0_early_devices, ARRAY_SIZE(sh73a0_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); + + /* override timer setup with soc-specific code */ + shmobile_timer.init = sh73a0_earlytimer_init; } diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 2e687932f83..c0a9093ba3a 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -78,7 +78,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu) /* enable cache coherency */ modify_scu_cpu_psr(0, 3 << (cpu * 8)); - if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3) + if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3) __raw_writel(1 << cpu, __io(WUPCR)); /* wake up */ else __raw_writel(1 << cpu, __io(SRESCR)); /* reset */ diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index be16231e86f..2fba5f3d1c8 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -37,11 +37,15 @@ static void __init shmobile_late_time_init(void) early_platform_driver_probe("earlytimer", 2, 0); } -static void __init shmobile_timer_init(void) +void __init shmobile_earlytimer_init(void) { late_time_init = shmobile_late_time_init; } +static void __init shmobile_timer_init(void) +{ +} + void __init shmobile_twd_init(struct twd_local_timer *twd_local_timer) { #ifdef CONFIG_HAVE_ARM_TWD diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 52af00446a6..c59e8b892d6 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -5,7 +5,7 @@ config UX500_SOC_COMMON default y select ARM_GIC select HAS_MTU - select ARM_ERRATA_753970 + select PL310_ERRATA_753970 select ARM_ERRATA_754322 select ARM_ERRATA_764369 diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 9b3d0fbaee7..88c3ba151e8 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -7,7 +7,7 @@ config ARCH_VEXPRESS_CA9X4 select ARM_GIC select ARM_ERRATA_720789 select ARM_ERRATA_751472 - select ARM_ERRATA_753970 + select PL310_ERRATA_753970 select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 1a3ca248816..7edef912163 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -631,7 +631,8 @@ comment "Processor Features" config ARM_LPAE bool "Support for the Large Physical Address Extension" - depends on MMU && CPU_V7 + depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \ + !CPU_32v4 && !CPU_32v3 help Say Y if you have an ARMv7 processor supporting the LPAE page table format and you would like to access memory beyond the diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 7a24d39661f..a655d3da386 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -55,7 +55,7 @@ loop1: cmp r1, #2 @ see what cache we have at this level blt skip @ skip if no cache, or just i-cache #ifdef CONFIG_PREEMPT - save_and_disable_irqs r9 @ make cssr&csidr read atomic + save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic #endif mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr isb @ isb to sych the new cssr&csidr diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 0404ccbb8aa..f1c8486f750 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -230,9 +230,7 @@ __v7_setup: mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif #ifdef CONFIG_ARM_ERRATA_743622 - teq r6, #0x20 @ present in r2p0 - teqne r6, #0x21 @ present in r2p1 - teqne r6, #0x22 @ present in r2p2 + teq r5, #0x00200000 @ only present in r2p* mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register orreq r10, r10, #1 << 6 @ set bit #6 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 06383b51e65..4de7d1e79e7 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -69,6 +69,7 @@ void __init omap_reserve(void) omap_vram_reserve_sdram_memblock(); omap_dsp_reserve_sdram_memblock(); omap_secure_ram_reserve_memblock(); + omap_barrier_reserve_memblock(); } void __init omap_init_consistent_dma_size(void) diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 2efd6454bce..37bbbbb981b 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -428,8 +428,16 @@ #define OMAP_GPMC_NR_IRQS 8 #define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) +/* PRCM IRQ handler */ +#ifdef CONFIG_ARCH_OMAP2PLUS +#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END) +#define OMAP_PRCM_NR_IRQS 64 +#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS) +#else +#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END +#endif -#define NR_IRQS OMAP_GPMC_IRQ_END +#define NR_IRQS OMAP_PRCM_IRQ_END #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h index 3047ff923a6..8c7994ce986 100644 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ b/arch/arm/plat-omap/include/plat/omap-secure.h @@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void) { } #endif +#ifdef CONFIG_OMAP4_ERRATA_I688 +extern int omap_barrier_reserve_memblock(void); +#else +static inline void omap_barrier_reserve_memblock(void) +{ } +#endif #endif /* __OMAP_SECURE_H__ */ diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 9fe35348e03..2bab4c99a23 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1249,7 +1249,7 @@ static void s3c2410_dma_resume(void) struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1; int channel; - for (channel = dma_channels - 1; channel >= 0; cp++, channel--) + for (channel = dma_channels - 1; channel >= 0; cp--, channel--) s3c2410_dma_resume_chan(cp); } diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index f10768e988d..d21d744e4d9 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1409,7 +1409,7 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd) #ifdef CONFIG_S3C_DEV_USB_HSOTG static struct resource s3c_usb_hsotg_resources[] = { - [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K), + [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K), [1] = DEFINE_RES_IRQ(IRQ_OTG), }; diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index 0c77e429867..abb5bdecd50 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -145,11 +145,13 @@ static void clockevent_set_mode(enum clock_event_mode mode, static int clockevent_next_event(unsigned long cycles, struct clock_event_device *clk_event_dev) { - u16 val; + u16 val = readw(gpt_base + CR(CLKEVT)); + + if (val & CTRL_ENABLE) + writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT)); writew(cycles, gpt_base + LOAD(CLKEVT)); - val = readw(gpt_base + CR(CLKEVT)); val |= CTRL_ENABLE | CTRL_INT_ENABLE; writew(val, gpt_base + CR(CLKEVT)); |