summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/configs/omap3_beagle_defconfig1
-rw-r--r--arch/arm/include/asm/bitops.h6
-rw-r--r--arch/arm/kernel/time.c1
-rw-r--r--arch/arm/kernel/traps.c76
-rw-r--r--arch/arm/mach-bcmring/core.c4
-rw-r--r--arch/arm/mach-bcmring/include/mach/system.h2
-rw-r--r--arch/arm/mach-ep93xx/Kconfig44
-rw-r--r--arch/arm/mach-ep93xx/Makefile.boot9
-rw-r--r--arch/arm/mach-ep93xx/clock.c166
-rw-r--r--arch/arm/mach-ep93xx/core.c31
-rw-r--r--arch/arm/mach-ep93xx/edb93xx.c31
-rw-r--r--arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h42
-rw-r--r--arch/arm/mach-ep93xx/include/mach/gpio.h16
-rw-r--r--arch/arm/mach-ep93xx/include/mach/memory.h6
-rw-r--r--arch/arm/mach-ep93xx/include/mach/platform.h4
-rw-r--r--arch/arm/mach-ep93xx/micro9.c132
-rw-r--r--arch/arm/mach-integrator/pci_v3.c1
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c80
-rw-r--r--arch/arm/mach-omap2/board-zoom2.c4
-rw-r--r--arch/arm/mach-omap2/clock24xx.c1
-rw-r--r--arch/arm/mach-omap2/clock34xx.c35
-rw-r--r--arch/arm/mach-omap2/clockdomain.c74
-rw-r--r--arch/arm/mach-omap2/pm-debug.c4
-rw-r--r--arch/arm/mach-omap2/pm34xx.c187
-rw-r--r--arch/arm/mach-omap2/powerdomain.c39
-rw-r--r--arch/arm/mach-pxa/cpufreq-pxa2xx.c2
-rw-r--r--arch/arm/mach-pxa/csb726.c2
-rw-r--r--arch/arm/mach-sa1100/Makefile1
-rw-r--r--arch/arm/mm/cache-v6.S20
-rw-r--r--arch/arm/mm/cache-v7.S19
-rw-r--r--arch/arm/mm/fault-armv.c9
-rw-r--r--arch/arm/mm/fault.c5
-rw-r--r--arch/arm/mm/highmem.c2
-rw-r--r--arch/arm/mm/init.c2
-rw-r--r--arch/arm/plat-omap/dma.c15
-rw-r--r--arch/arm/plat-omap/include/mach/cpu.h37
-rw-r--r--arch/arm/plat-omap/include/mach/powerdomain.h2
-rw-r--r--arch/arm/plat-omap/iovmm.c9
-rw-r--r--arch/arm/plat-omap/mcbsp.c2
-rw-r--r--arch/arm/plat-omap/sram.c3
-rw-r--r--arch/arm/plat-s3c24xx/adc.c1
41 files changed, 712 insertions, 415 deletions
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index 357d4021e2d..b3c8cce0f8f 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -969,7 +969,6 @@ CONFIG_USB_ETH_RNDIS=y
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
CONFIG_TWL4030_USB=y
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index 63a481fbbed..338ff19ae44 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -84,7 +84,7 @@ ____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
*p = res | mask;
raw_local_irq_restore(flags);
- return res & mask;
+ return (res & mask) != 0;
}
static inline int
@@ -101,7 +101,7 @@ ____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
*p = res & ~mask;
raw_local_irq_restore(flags);
- return res & mask;
+ return (res & mask) != 0;
}
static inline int
@@ -118,7 +118,7 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
*p = res ^ mask;
raw_local_irq_restore(flags);
- return res & mask;
+ return (res & mask) != 0;
}
#include <asm-generic/bitops/non-atomic.h>
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 4cdc4a0bd02..d38cdf2c827 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -21,6 +21,7 @@
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/init.h>
+#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/timex.h>
#include <linux/errno.h>
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 467b69ed102..f838f36eb70 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -45,21 +45,21 @@ static int __init user_debug_setup(char *str)
__setup("user_debug=", user_debug_setup);
#endif
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
+static void dump_mem(const char *, const char *, unsigned long, unsigned long);
void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
{
#ifdef CONFIG_KALLSYMS
- printk("[<%08lx>] ", where);
- print_symbol("(%s) ", where);
- printk("from [<%08lx>] ", from);
- print_symbol("(%s)\n", from);
+ char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
+ sprint_symbol(sym1, where);
+ sprint_symbol(sym2, from);
+ printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
#else
printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
#endif
if (in_exception_text(where))
- dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
+ dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
}
#ifndef CONFIG_ARM_UNWIND
@@ -81,9 +81,10 @@ static int verify_stack(unsigned long sp)
/*
* Dump out the contents of some memory nicely...
*/
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+ unsigned long top)
{
- unsigned long p = bottom & ~31;
+ unsigned long first;
mm_segment_t fs;
int i;
@@ -95,33 +96,37 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
fs = get_fs();
set_fs(KERNEL_DS);
- printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+ printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
- for (p = bottom & ~31; p < top;) {
- printk("%04lx: ", p & 0xffff);
+ for (first = bottom & ~31; first < top; first += 32) {
+ unsigned long p;
+ char str[sizeof(" 12345678") * 8 + 1];
- for (i = 0; i < 8; i++, p += 4) {
- unsigned int val;
+ memset(str, ' ', sizeof(str));
+ str[sizeof(str) - 1] = '\0';
- if (p < bottom || p >= top)
- printk(" ");
- else {
- __get_user(val, (unsigned long *)p);
- printk("%08x ", val);
+ for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
+ if (p >= bottom && p < top) {
+ unsigned long val;
+ if (__get_user(val, (unsigned long *)p) == 0)
+ sprintf(str + i * 9, " %08lx", val);
+ else
+ sprintf(str + i * 9, " ????????");
}
}
- printk ("\n");
+ printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
}
set_fs(fs);
}
-static void dump_instr(struct pt_regs *regs)
+static void dump_instr(const char *lvl, struct pt_regs *regs)
{
unsigned long addr = instruction_pointer(regs);
const int thumb = thumb_mode(regs);
const int width = thumb ? 4 : 8;
mm_segment_t fs;
+ char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
int i;
/*
@@ -132,7 +137,6 @@ static void dump_instr(struct pt_regs *regs)
fs = get_fs();
set_fs(KERNEL_DS);
- printk("Code: ");
for (i = -4; i < 1; i++) {
unsigned int val, bad;
@@ -142,13 +146,14 @@ static void dump_instr(struct pt_regs *regs)
bad = __get_user(val, &((u32 *)addr)[i]);
if (!bad)
- printk(i == 0 ? "(%0*x) " : "%0*x ", width, val);
+ p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
+ width, val);
else {
- printk("bad PC value.");
+ p += sprintf(p, "bad PC value");
break;
}
}
- printk("\n");
+ printk("%sCode: %s\n", lvl, str);
set_fs(fs);
}
@@ -224,18 +229,19 @@ static void __die(const char *str, int err, struct thread_info *thread, struct p
struct task_struct *tsk = thread->task;
static int die_counter;
- printk("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
+ printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
str, err, ++die_counter);
+ sysfs_printk_last_file();
print_modules();
__show_regs(regs);
- printk("Process %s (pid: %d, stack limit = 0x%p)\n",
- tsk->comm, task_pid_nr(tsk), thread + 1);
+ printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
+ TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
if (!user_mode(regs) || in_interrupt()) {
- dump_mem("Stack: ", regs->ARM_sp,
+ dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
THREAD_SIZE + (unsigned long)task_stack_page(tsk));
dump_backtrace(regs, tsk);
- dump_instr(regs);
+ dump_instr(KERN_EMERG, regs);
}
}
@@ -250,13 +256,14 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
oops_enter();
- console_verbose();
spin_lock_irq(&die_lock);
+ console_verbose();
bust_spinlocks(1);
__die(str, err, thread, regs);
bust_spinlocks(0);
add_taint(TAINT_DIE);
spin_unlock_irq(&die_lock);
+ oops_exit();
if (in_interrupt())
panic("Fatal exception in interrupt");
@@ -264,7 +271,6 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
if (panic_on_oops)
panic("Fatal exception");
- oops_exit();
do_exit(SIGSEGV);
}
@@ -349,7 +355,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
if (user_debug & UDBG_UNDEFINED) {
printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
current->comm, task_pid_nr(current), pc);
- dump_instr(regs);
+ dump_instr(KERN_INFO, regs);
}
#endif
@@ -400,7 +406,7 @@ static int bad_syscall(int n, struct pt_regs *regs)
if (user_debug & UDBG_SYSCALL) {
printk(KERN_ERR "[%d] %s: obsolete system call %08x.\n",
task_pid_nr(current), current->comm, n);
- dump_instr(regs);
+ dump_instr(KERN_ERR, regs);
}
#endif
@@ -579,7 +585,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
if (user_debug & UDBG_SYSCALL) {
printk("[%d] %s: arm syscall %d\n",
task_pid_nr(current), current->comm, no);
- dump_instr(regs);
+ dump_instr("", regs);
if (user_mode(regs)) {
__show_regs(regs);
c_backtrace(regs->ARM_fp, processor_mode(regs));
@@ -656,7 +662,7 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
if (user_debug & UDBG_BADABORT) {
printk(KERN_ERR "[%d] %s: bad data abort: code %d instr 0x%08lx\n",
task_pid_nr(current), current->comm, code, instr);
- dump_instr(regs);
+ dump_instr(KERN_ERR, regs);
show_pte(current->mm, addr);
}
#endif
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 4b4f69251b3..e590bbe0a7b 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -271,12 +271,12 @@ static struct irqaction bcmring_timer_irq = {
.handler = bcmring_timer_interrupt,
};
-static cycle_t bcmring_get_cycles_timer1(void)
+static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
{
return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
}
-static cycle_t bcmring_get_cycles_timer3(void)
+static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
{
return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
}
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
index cdbf93c694a..38b37060d42 100644
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -29,7 +29,7 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-static inline void arch_reset(char mode, char *cmd)
+static inline void arch_reset(char mode, const char *cmd)
{
printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index d7291c682a6..9167c3d2a5e 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -17,13 +17,31 @@ config EP93XX_SDCE3_SYNC_PHYS_OFFSET
bool "0x00000000 - SDCE3/SyncBoot"
help
Select this option if you want support for EP93xx boards with the
- first SDRAM bank at 0x00000000
+ first SDRAM bank at 0x00000000.
config EP93XX_SDCE0_PHYS_OFFSET
bool "0xc0000000 - SDCEO"
help
Select this option if you want support for EP93xx boards with the
- first SDRAM bank at 0xc0000000
+ first SDRAM bank at 0xc0000000.
+
+config EP93XX_SDCE1_PHYS_OFFSET
+ bool "0xd0000000 - SDCE1"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xd0000000.
+
+config EP93XX_SDCE2_PHYS_OFFSET
+ bool "0xe0000000 - SDCE2"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xe0000000.
+
+config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+ bool "0xf0000000 - SDCE3/AsyncBoot"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xf0000000.
endchoice
@@ -112,28 +130,36 @@ config MACH_MICRO9
bool
config MACH_MICRO9H
- bool "Support Contec Hypercontrol Micro9-H"
+ bool "Support Contec Micro9-High"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-H board.
+ Contec Micro9-High board.
config MACH_MICRO9M
- bool "Support Contec Hypercontrol Micro9-M"
- depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ bool "Support Contec Micro9-Mid"
+ depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-M board.
+ Contec Micro9-Mid board.
config MACH_MICRO9L
- bool "Support Contec Hypercontrol Micro9-L"
+ bool "Support Contec Micro9-Lite"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-L board.
+ Contec Micro9-Lite board.
+
+config MACH_MICRO9S
+ bool "Support Contec Micro9-Slim"
+ depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Micro9-Slim board.
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index 27a085a8f12..0ad33f15c62 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -3,3 +3,12 @@ params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100
zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000
params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0008000
+params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0008000
+params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0008000
+params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index dda19cd7619..1d0f9d8aff2 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -16,13 +16,16 @@
#include <linux/module.h>
#include <linux/string.h>
#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
#include <asm/clkdev.h>
#include <asm/div64.h>
-#include <mach/hardware.h>
struct clk {
+ struct clk *parent;
unsigned long rate;
int users;
int sw_locked;
@@ -39,40 +42,60 @@ static unsigned long get_uart_rate(struct clk *clk);
static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
static int set_div_rate(struct clk *clk, unsigned long rate);
+
+static struct clk clk_xtali = {
+ .rate = EP93XX_EXT_CLK_RATE,
+};
static struct clk clk_uart1 = {
+ .parent = &clk_xtali,
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVCFG,
.enable_mask = EP93XX_SYSCON_DEVCFG_U1EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart2 = {
+ .parent = &clk_xtali,
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVCFG,
.enable_mask = EP93XX_SYSCON_DEVCFG_U2EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart3 = {
+ .parent = &clk_xtali,
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVCFG,
.enable_mask = EP93XX_SYSCON_DEVCFG_U3EN,
.get_rate = get_uart_rate,
};
-static struct clk clk_pll1;
-static struct clk clk_f;
-static struct clk clk_h;
-static struct clk clk_p;
-static struct clk clk_pll2;
+static struct clk clk_pll1 = {
+ .parent = &clk_xtali,
+};
+static struct clk clk_f = {
+ .parent = &clk_pll1,
+};
+static struct clk clk_h = {
+ .parent = &clk_pll1,
+};
+static struct clk clk_p = {
+ .parent = &clk_pll1,
+};
+static struct clk clk_pll2 = {
+ .parent = &clk_xtali,
+};
static struct clk clk_usb_host = {
+ .parent = &clk_pll2,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN,
};
static struct clk clk_keypad = {
+ .parent = &clk_xtali,
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_KEYTCHCLKDIV,
.enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
.set_rate = set_keytchclk_rate,
};
static struct clk clk_pwm = {
+ .parent = &clk_xtali,
.rate = EP93XX_EXT_CLK_RATE,
};
@@ -85,50 +108,62 @@ static struct clk clk_video = {
/* DMA Clocks */
static struct clk clk_m2p0 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P0,
};
static struct clk clk_m2p1 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P1,
};
static struct clk clk_m2p2 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P2,
};
static struct clk clk_m2p3 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P3,
};
static struct clk clk_m2p4 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P4,
};
static struct clk clk_m2p5 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P5,
};
static struct clk clk_m2p6 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P6,
};
static struct clk clk_m2p7 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P7,
};
static struct clk clk_m2p8 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P8,
};
static struct clk clk_m2p9 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P9,
};
static struct clk clk_m2m0 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M0,
};
static struct clk clk_m2m1 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M1,
};
@@ -137,6 +172,7 @@ static struct clk clk_m2m1 = {
{ .dev_id = dev, .con_id = con, .clk = ck }
static struct clk_lookup clocks[] = {
+ INIT_CK(NULL, "xtali", &clk_xtali),
INIT_CK("apb:uart1", NULL, &clk_uart1),
INIT_CK("apb:uart2", NULL, &clk_uart2),
INIT_CK("apb:uart3", NULL, &clk_uart3),
@@ -163,48 +199,84 @@ static struct clk_lookup clocks[] = {
INIT_CK(NULL, "m2m1", &clk_m2m1),
};
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+ if (!clk->users++) {
+ if (clk->parent)
+ __clk_enable(clk->parent);
+
+ if (clk->enable_reg) {
+ u32 v;
+
+ v = __raw_readl(clk->enable_reg);
+ v |= clk->enable_mask;
+ if (clk->sw_locked)
+ ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+ else
+ __raw_writel(v, clk->enable_reg);
+ }
+ }
+}
int clk_enable(struct clk *clk)
{
- if (!clk->users++ && clk->enable_reg) {
- u32 value;
+ unsigned long flags;
- value = __raw_readl(clk->enable_reg);
- value |= clk->enable_mask;
- if (clk->sw_locked)
- ep93xx_syscon_swlocked_write(value, clk->enable_reg);
- else
- __raw_writel(value, clk->enable_reg);
- }
+ if (!clk)
+ return -EINVAL;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
return 0;
}
EXPORT_SYMBOL(clk_enable);
-void clk_disable(struct clk *clk)
+static void __clk_disable(struct clk *clk)
{
- if (!--clk->users && clk->enable_reg) {
- u32 value;
+ if (!--clk->users) {
+ if (clk->enable_reg) {
+ u32 v;
+
+ v = __raw_readl(clk->enable_reg);
+ v &= ~clk->enable_mask;
+ if (clk->sw_locked)
+ ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+ else
+ __raw_writel(v, clk->enable_reg);
+ }
- value = __raw_readl(clk->enable_reg);
- value &= ~clk->enable_mask;
- if (clk->sw_locked)
- ep93xx_syscon_swlocked_write(value, clk->enable_reg);
- else
- __raw_writel(value, clk->enable_reg);
+ if (clk->parent)
+ __clk_disable(clk->parent);
}
}
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (!clk)
+ return;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+}
EXPORT_SYMBOL(clk_disable);
static unsigned long get_uart_rate(struct clk *clk)
{
+ unsigned long rate = clk_get_rate(clk->parent);
u32 value;
value = __raw_readl(EP93XX_SYSCON_PWRCNT);
if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
- return EP93XX_EXT_CLK_RATE;
+ return rate;
else
- return EP93XX_EXT_CLK_RATE / 2;
+ return rate / 2;
}
unsigned long clk_get_rate(struct clk *clk)
@@ -244,16 +316,16 @@ static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
return 0;
}
-static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
- int *pdiv, int *div)
+static int calc_clk_div(struct clk *clk, unsigned long rate,
+ int *psel, int *esel, int *pdiv, int *div)
{
- unsigned long max_rate, best_rate = 0,
- actual_rate = 0, mclk_rate = 0, rate_err = -1;
+ struct clk *mclk;
+ unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1;
int i, found = 0, __div = 0, __pdiv = 0;
/* Don't exceed the maximum rate */
max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
- (unsigned long)EP93XX_EXT_CLK_RATE / 4);
+ clk_xtali.rate / 4);
rate = min(rate, max_rate);
/*
@@ -267,11 +339,12 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
*/
for (i = 0; i < 3; i++) {
if (i == 0)
- mclk_rate = EP93XX_EXT_CLK_RATE * 2;
+ mclk = &clk_xtali;
else if (i == 1)
- mclk_rate = clk_pll1.rate * 2;
- else if (i == 2)
- mclk_rate = clk_pll2.rate * 2;
+ mclk = &clk_pll1;
+ else
+ mclk = &clk_pll2;
+ mclk_rate = mclk->rate * 2;
/* Try each predivider value */
for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
@@ -286,7 +359,8 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
*div = __div;
*psel = (i == 2);
*esel = (i != 0);
- best_rate = actual_rate;
+ clk->parent = mclk;
+ clk->rate = actual_rate;
rate_err = abs(actual_rate - rate);
found = 1;
}
@@ -294,21 +368,19 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
}
if (!found)
- return 0;
+ return -EINVAL;
- return best_rate;
+ return 0;
}
static int set_div_rate(struct clk *clk, unsigned long rate)
{
- unsigned long actual_rate;
- int psel = 0, esel = 0, pdiv = 0, div = 0;
+ int err, psel = 0, esel = 0, pdiv = 0, div = 0;
u32 val;
- actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
- if (actual_rate == 0)
- return -EINVAL;
- clk->rate = actual_rate;
+ err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div);
+ if (err)
+ return err;
/* Clear the esel, psel, pdiv and div bits */
val = __raw_readl(clk->enable_reg);
@@ -344,7 +416,7 @@ static unsigned long calc_pll_rate(u32 config_word)
unsigned long long rate;
int i;
- rate = EP93XX_EXT_CLK_RATE;
+ rate = clk_xtali.rate;
rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
@@ -377,7 +449,7 @@ static int __init ep93xx_clock_init(void)
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
if (!(value & 0x00800000)) { /* PLL1 bypassed? */
- clk_pll1.rate = EP93XX_EXT_CLK_RATE;
+ clk_pll1.rate = clk_xtali.rate;
} else {
clk_pll1.rate = calc_pll_rate(value);
}
@@ -388,7 +460,7 @@ static int __init ep93xx_clock_init(void)
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
- clk_pll2.rate = EP93XX_EXT_CLK_RATE;
+ clk_pll2.rate = clk_xtali.rate;
} else if (value & 0x00040000) { /* PLL2 enabled? */
clk_pll2.rate = calc_pll_rate(value);
} else {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index f7ebed942f6..f95dc160c34 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -550,13 +550,11 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
platform_device_register(&ep93xx_eth_device);
}
-static struct i2c_gpio_platform_data ep93xx_i2c_data = {
- .sda_pin = EP93XX_GPIO_LINE_EEDAT,
- .sda_is_open_drain = 0,
- .scl_pin = EP93XX_GPIO_LINE_EECLK,
- .scl_is_open_drain = 0,
- .udelay = 2,
-};
+
+/*************************************************************************
+ * EP93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data ep93xx_i2c_data;
static struct platform_device ep93xx_i2c_device = {
.name = "i2c-gpio",
@@ -564,8 +562,25 @@ static struct platform_device ep93xx_i2c_device = {
.dev.platform_data = &ep93xx_i2c_data,
};
-void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
+void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+ struct i2c_board_info *devices, int num)
{
+ /*
+ * Set the EEPROM interface pin drive type control.
+ * Defines the driver type for the EECLK and EEDAT pins as either
+ * open drain, which will require an external pull-up, or a normal
+ * CMOS driver.
+ */
+ if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
+ pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+ if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
+ pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+
+ __raw_writel((data->sda_is_open_drain << 1) |
+ (data->scl_is_open_drain << 0),
+ EP93XX_GPIO_EEDRIVE);
+
+ ep93xx_i2c_data = *data;
i2c_register_board_info(0, devices, num);
platform_device_register(&ep93xx_i2c_device);
}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 73145ae5d3f..ca71cf1a72a 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -27,8 +27,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/i2c.h>
#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
@@ -76,13 +78,26 @@ static struct ep93xx_eth_data edb93xx_eth_data = {
.phy_id = 1,
};
-static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+
+/*************************************************************************
+ * EDB93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .sda_is_open_drain = 0,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+ .scl_is_open_drain = 0,
+ .udelay = 0, /* default to 100 kHz */
+ .timeout = 0, /* default to 100 ms */
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
{
I2C_BOARD_INFO("isl1208", 0x6f),
},
};
-static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
{
I2C_BOARD_INFO("ds1337", 0x68),
},
@@ -92,12 +107,14 @@ static void __init edb93xx_register_i2c(void)
{
if (machine_is_edb9302a() || machine_is_edb9307a() ||
machine_is_edb9315a()) {
- ep93xx_register_i2c(edb93xxa_i2c_data,
- ARRAY_SIZE(edb93xxa_i2c_data));
+ ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
+ edb93xxa_i2c_board_info,
+ ARRAY_SIZE(edb93xxa_i2c_board_info));
} else if (machine_is_edb9307() || machine_is_edb9312() ||
machine_is_edb9315()) {
- ep93xx_register_i2c(edb93xx_i2c_data,
- ARRAY_SIZE(edb93xx_i2c_data));
+ ep93xx_register_i2c(&edb93xx_i2c_gpio_data
+ edb93xx_i2c_board_info,
+ ARRAY_SIZE(edb93xx_i2c_board_info));
}
}
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 0fbf87b1633..b1f937eda29 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -52,25 +52,27 @@
#define EP93XX_AHB_VIRT_BASE 0xfef00000
#define EP93XX_AHB_SIZE 0x00100000
+#define EP93XX_AHB_PHYS(x) (EP93XX_AHB_PHYS_BASE + (x))
#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x))
#define EP93XX_APB_PHYS_BASE 0x80800000
#define EP93XX_APB_VIRT_BASE 0xfed00000
#define EP93XX_APB_SIZE 0x00200000
+#define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x))
#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x))
/* AHB peripherals */
#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000)
-#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000)
#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000)
-#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000)
#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000)
-#define EP93XX_RASTER_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00030000)
+#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000)
#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000)
#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000)
@@ -112,21 +114,10 @@
#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c)
-#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50)
-#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54)
-#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58)
#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90)
-#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94)
-#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98)
-#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c)
#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac)
-#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0)
-#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4)
-#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
+#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8)
#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
@@ -134,13 +125,13 @@
#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000)
-#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000)
#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000)
-#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE EP93XX_APB_PHYS(0x000d0000)
#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000)
-#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000)
#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000)
#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
@@ -148,10 +139,10 @@
#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000)
-#define EP93XX_PWM_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00110000)
+#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000)
#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000)
-#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000)
#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000)
#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000)
@@ -218,6 +209,17 @@
#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16)
#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15)
#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0)
+#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c)
+#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000)
+#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28)
+#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8)
+#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7)
+#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6)
+#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5)
+#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4)
+#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3)
+#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1)
+#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0)
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
index 0a1498ae899..c991b149bdf 100644
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -114,17 +114,9 @@ extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
* B0..B7 (7..15) to irq 72..79, and
* F0..F7 (16..24) to irq 80..87.
*/
-static inline int gpio_to_irq(unsigned gpio)
-{
- if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
- return 64 + gpio;
-
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return irq - gpio_to_irq(0);
-}
+#define gpio_to_irq(gpio) \
+ (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
+
+#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0))
#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index 925b12ea099..554064e9030 100644
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -9,6 +9,12 @@
#define PHYS_OFFSET UL(0x00000000)
#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
#define PHYS_OFFSET UL(0xc0000000)
+#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xd0000000)
+#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xe0000000)
+#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xf0000000)
#else
#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 01a0f0838e5..a3ec33fd79d 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -4,6 +4,7 @@
#ifndef __ASSEMBLY__
+struct i2c_gpio_platform_data;
struct i2c_board_info;
struct platform_device;
struct ep93xxfb_mach_info;
@@ -33,7 +34,8 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
}
void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+ struct i2c_board_info *devices, int num);
void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
void ep93xx_register_pwm(int pwm0, int pwm1);
int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 0a313e82fb7..d83b80478b0 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -2,7 +2,9 @@
* linux/arch/arm/mach-ep93xx/micro9.c
*
* Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- * Manfred Gruber <manfred.gruber@contec.at>
+ * Manfred Gruber <m.gruber@tirol.com>
+ * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
+ * Hubert Feurstein <hubert.feurstein@contec.at>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -20,104 +22,124 @@
#include <asm/mach/arch.h>
-static struct ep93xx_eth_data micro9_eth_data = {
- .phy_id = 0x1f,
-};
-
-static void __init micro9_init(void)
-{
- ep93xx_register_eth(&micro9_eth_data, 1);
-}
-
-/*
- * Micro9-H
- */
-#ifdef CONFIG_MACH_MICRO9H
-static struct physmap_flash_data micro9h_flash_data = {
- .width = 4,
-};
-
-static struct resource micro9h_flash_resource = {
+/*************************************************************************
+ * Micro9 NOR Flash
+ *
+ * Micro9-High has up to 64MB of 32-bit flash on CS1
+ * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
+ * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
+ *************************************************************************/
+static struct physmap_flash_data micro9_flash_data;
+
+static struct resource micro9_flash_resource = {
.start = EP93XX_CS1_PHYS_BASE,
.end = EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
-static struct platform_device micro9h_flash = {
+static struct platform_device micro9_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
- .platform_data = &micro9h_flash_data,
+ .platform_data = &micro9_flash_data,
},
.num_resources = 1,
- .resource = &micro9h_flash_resource,
+ .resource = &micro9_flash_resource,
};
-static void __init micro9h_init(void)
+static void __init __micro9_register_flash(unsigned int width)
+{
+ micro9_flash_data.width = width;
+
+ platform_device_register(&micro9_flash);
+}
+
+static unsigned int __init micro9_detect_bootwidth(void)
+{
+ u32 v;
+
+ /* Detect the bus width of the external flash memory */
+ v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+ if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
+ return 4; /* 32-bit */
+ else
+ return 2; /* 16-bit */
+}
+
+static void __init micro9_register_flash(void)
{
- platform_device_register(&micro9h_flash);
+ if (machine_is_micro9())
+ __micro9_register_flash(4);
+ else if (machine_is_micro9m() || machine_is_micro9s())
+ __micro9_register_flash(micro9_detect_bootwidth());
}
-static void __init micro9h_init_machine(void)
+
+/*************************************************************************
+ * Micro9 Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data micro9_eth_data = {
+ .phy_id = 0x1f,
+};
+
+
+static void __init micro9_init_machine(void)
{
ep93xx_init_devices();
- micro9_init();
- micro9h_init();
+ ep93xx_register_eth(&micro9_eth_data, 1);
+ micro9_register_flash();
}
-MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
- /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+
+#ifdef CONFIG_MACH_MICRO9H
+MACHINE_START(MICRO9, "Contec Micro9-High")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
- .init_machine = micro9h_init_machine,
+ .init_machine = micro9_init_machine,
MACHINE_END
#endif
-/*
- * Micro9-M
- */
#ifdef CONFIG_MACH_MICRO9M
-static void __init micro9m_init_machine(void)
-{
- ep93xx_init_devices();
- micro9_init();
-}
-
-MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
- /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9M, "Contec Micro9-Mid")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
- .init_machine = micro9m_init_machine,
+ .init_machine = micro9_init_machine,
MACHINE_END
#endif
-/*
- * Micro9-L
- */
#ifdef CONFIG_MACH_MICRO9L
-static void __init micro9l_init_machine(void)
-{
- ep93xx_init_devices();
- micro9_init();
-}
-
-MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
- /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9L, "Contec Micro9-Lite")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
- .init_machine = micro9l_init_machine,
+ .init_machine = micro9_init_machine,
MACHINE_END
#endif
+#ifdef CONFIG_MACH_MICRO9S
+MACHINE_START(MICRO9S, "Contec Micro9-Slim")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = micro9_init_machine,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 901cc205015..148d25fc636 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -31,6 +31,7 @@
#include <mach/hardware.h>
#include <asm/irq.h>
+#include <asm/signal.h>
#include <asm/system.h>
#include <asm/mach/pci.h>
#include <asm/irq_regs.h>
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index b45ad312c58..2b0eb1ba5d7 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -38,49 +38,49 @@
static int board_keymap[] = {
KEY(0, 0, KEY_Q),
- KEY(0, 1, KEY_W),
- KEY(0, 2, KEY_E),
- KEY(0, 3, KEY_R),
- KEY(0, 4, KEY_T),
- KEY(0, 5, KEY_Y),
- KEY(0, 6, KEY_U),
- KEY(0, 7, KEY_I),
- KEY(1, 0, KEY_O),
+ KEY(0, 1, KEY_O),
+ KEY(0, 2, KEY_P),
+ KEY(0, 3, KEY_COMMA),
+ KEY(0, 4, KEY_BACKSPACE),
+ KEY(0, 6, KEY_A),
+ KEY(0, 7, KEY_S),
+ KEY(1, 0, KEY_W),
KEY(1, 1, KEY_D),
- KEY(1, 2, KEY_DOT),
- KEY(1, 3, KEY_V),
- KEY(1, 4, KEY_DOWN),
- KEY(2, 0, KEY_P),
- KEY(2, 1, KEY_F),
+ KEY(1, 2, KEY_F),
+ KEY(1, 3, KEY_G),
+ KEY(1, 4, KEY_H),
+ KEY(1, 5, KEY_J),
+ KEY(1, 6, KEY_K),
+ KEY(1, 7, KEY_L),
+ KEY(2, 0, KEY_E),
+ KEY(2, 1, KEY_DOT),
KEY(2, 2, KEY_UP),
- KEY(2, 3, KEY_B),
- KEY(2, 4, KEY_RIGHT),
- KEY(3, 0, KEY_COMMA),
- KEY(3, 1, KEY_G),
- KEY(3, 2, KEY_ENTER),
+ KEY(2, 3, KEY_ENTER),
+ KEY(2, 5, KEY_Z),
+ KEY(2, 6, KEY_X),
+ KEY(2, 7, KEY_C),
+ KEY(3, 0, KEY_R),
+ KEY(3, 1, KEY_V),
+ KEY(3, 2, KEY_B),
KEY(3, 3, KEY_N),
- KEY(4, 0, KEY_BACKSPACE),
- KEY(4, 1, KEY_H),
- KEY(4, 3, KEY_M),
+ KEY(3, 4, KEY_M),
+ KEY(3, 5, KEY_SPACE),
+ KEY(3, 6, KEY_SPACE),
+ KEY(3, 7, KEY_LEFT),
+ KEY(4, 0, KEY_T),
+ KEY(4, 1, KEY_DOWN),
+ KEY(4, 2, KEY_RIGHT),
KEY(4, 4, KEY_LEFTCTRL),
- KEY(5, 1, KEY_J),
- KEY(5, 2, KEY_Z),
- KEY(5, 3, KEY_SPACE),
- KEY(5, 4, KEY_LEFTSHIFT),
- KEY(6, 0, KEY_A),
- KEY(6, 1, KEY_K),
- KEY(6, 2, KEY_X),
- KEY(6, 3, KEY_SPACE),
- KEY(6, 4, KEY_FN),
- KEY(7, 0, KEY_S),
- KEY(7, 1, KEY_L),
- KEY(7, 2, KEY_C),
- KEY(7, 3, KEY_LEFT),
- KEY(0xff, 0, KEY_F6),
- KEY(0xff, 1, KEY_F7),
- KEY(0xff, 2, KEY_F8),
- KEY(0xff, 4, KEY_F9),
- KEY(0xff, 5, KEY_F10),
+ KEY(4, 5, KEY_RIGHTALT),
+ KEY(4, 6, KEY_LEFTSHIFT),
+ KEY(5, 0, KEY_Y),
+ KEY(6, 0, KEY_U),
+ KEY(7, 0, KEY_I),
+ KEY(7, 1, KEY_F7),
+ KEY(7, 2, KEY_F8),
+ KEY(0xff, 2, KEY_F9),
+ KEY(0xff, 4, KEY_F10),
+ KEY(0xff, 5, KEY_F11),
};
static struct matrix_keymap_data board_map_data = {
@@ -444,7 +444,7 @@ static int __init rx51_i2c_init(void)
rx51_twldata.vaux3 = &rx51_vaux3_cam;
rx51_twldata.vmmc2 = &rx51_vmmc2;
}
- omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
+ omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
omap_register_i2c_bus(2, 100, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index b7b32208ced..fd3369d5e5c 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -25,6 +25,7 @@
#include <mach/keypad.h>
#include "mmc-twl4030.h"
+#include "sdram-micron-mt46h32m32lf-6.h"
/* Zoom2 has Qwerty keyboard*/
static int board_keymap[] = {
@@ -213,7 +214,8 @@ static void __init omap_zoom2_init_irq(void)
{
omap_board_config = zoom2_config;
omap_board_config_size = ARRAY_SIZE(zoom2_config);
- omap2_init_common_hw(NULL, NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index bc5d3ac6661..e2dbedd581e 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -769,6 +769,7 @@ int __init omap2_clk_init(void)
if (c->cpu & cpu_mask) {
clkdev_add(&c->lk);
clk_register(c->lk.clk);
+ omap2_init_clk_clkdm(c->lk.clk);
}
/* Check the MPU rate set by bootloader */
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index fafcd32e690..489556eecbd 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -338,6 +338,13 @@ static struct omap_clk omap34xx_clks[] = {
*/
#define SDRC_MPURATE_LOOPS 96
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST 120000000
+
/**
* omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
* @clk: struct clk * being enabled
@@ -1056,6 +1063,28 @@ void omap2_clk_prepare_for_reboot(void)
#endif
}
+static void omap3_clk_lock_dpll5(void)
+{
+ struct clk *dpll5_clk;
+ struct clk *dpll5_m2_clk;
+
+ dpll5_clk = clk_get(NULL, "dpll5_ck");
+ clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+ clk_enable(dpll5_clk);
+
+ /* Enable autoidle to allow it to enter low power bypass */
+ omap3_dpll_allow_idle(dpll5_clk);
+
+ /* Program dpll5_m2_clk divider for no division */
+ dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+ clk_enable(dpll5_m2_clk);
+ clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+ clk_disable(dpll5_m2_clk);
+ clk_disable(dpll5_clk);
+ return;
+}
+
/* REVISIT: Move this init stuff out into clock.c */
/*
@@ -1148,6 +1177,12 @@ int __init omap2_clk_init(void)
*/
clk_enable_init_clocks();
+ /*
+ * Lock DPLL5 and put it in autoidle.
+ */
+ if (omap_rev() >= OMAP3430_REV_ES2_0)
+ omap3_clk_lock_dpll5();
+
/* Avoid sleeping during omap2_clk_prepare_for_reboot() */
/* REVISIT: not yet ready for 343x */
#if 0
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 4ef7b4f5474..58aff8485df 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -137,6 +137,36 @@ static void _clkdm_del_autodeps(struct clockdomain *clkdm)
}
}
+/*
+ * _omap2_clkdm_set_hwsup - set the hwsup idle transition bit
+ * @clkdm: struct clockdomain *
+ * @enable: int 0 to disable, 1 to enable
+ *
+ * Internal helper for actually switching the bit that controls hwsup
+ * idle transitions for clkdm.
+ */
+static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
+{
+ u32 v;
+
+ if (cpu_is_omap24xx()) {
+ if (enable)
+ v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
+ else
+ v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
+ } else if (cpu_is_omap34xx()) {
+ if (enable)
+ v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
+ else
+ v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
+ } else {
+ BUG();
+ }
+
+ cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
+ v << __ffs(clkdm->clktrctrl_mask),
+ clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+}
static struct clockdomain *_clkdm_lookup(const char *name)
{
@@ -456,8 +486,6 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
*/
void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
{
- u32 v;
-
if (!clkdm)
return;
@@ -473,18 +501,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_add_autodeps(clkdm);
- if (cpu_is_omap24xx())
- v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
- else if (cpu_is_omap34xx())
- v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
- else
- BUG();
-
-
- cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
- v << __ffs(clkdm->clktrctrl_mask),
- clkdm->pwrdm.ptr->prcm_offs,
- CM_CLKSTCTRL);
+ _omap2_clkdm_set_hwsup(clkdm, 1);
pwrdm_clkdm_state_switch(clkdm);
}
@@ -500,8 +517,6 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
*/
void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
{
- u32 v;
-
if (!clkdm)
return;
@@ -514,16 +529,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
pr_debug("clockdomain: disabling automatic idle transitions for %s\n",
clkdm->name);
- if (cpu_is_omap24xx())
- v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
- else if (cpu_is_omap34xx())
- v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
- else
- BUG();
-
- cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
- v << __ffs(clkdm->clktrctrl_mask),
- clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+ _omap2_clkdm_set_hwsup(clkdm, 0);
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_del_autodeps(clkdm);
@@ -569,10 +575,14 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
v = omap2_clkdm_clktrctrl_read(clkdm);
if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
- (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
+ (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) {
+ /* Disable HW transitions when we are changing deps */
+ _omap2_clkdm_set_hwsup(clkdm, 0);
_clkdm_add_autodeps(clkdm);
- else
+ _omap2_clkdm_set_hwsup(clkdm, 1);
+ } else {
omap2_clkdm_wakeup(clkdm);
+ }
pwrdm_wait_transition(clkdm->pwrdm.ptr);
pwrdm_clkdm_state_switch(clkdm);
@@ -623,10 +633,14 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
v = omap2_clkdm_clktrctrl_read(clkdm);
if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
- (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
+ (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) {
+ /* Disable HW transitions when we are changing deps */
+ _omap2_clkdm_set_hwsup(clkdm, 0);
_clkdm_del_autodeps(clkdm);
- else
+ _omap2_clkdm_set_hwsup(clkdm, 1);
+ } else {
omap2_clkdm_sleep(clkdm);
+ }
pwrdm_clkdm_state_switch(clkdm);
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 1b4c1600f8d..2fc4d6abbd0 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -541,7 +541,7 @@ static int __init pm_dbg_init(void)
printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
return -ENODEV;
}
-
+
d = debugfs_create_dir("pm_debug", NULL);
if (IS_ERR(d))
return PTR_ERR(d);
@@ -551,7 +551,7 @@ static int __init pm_dbg_init(void)
(void) debugfs_create_file("time", S_IRUGO,
d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
- pwrdm_for_each(pwrdms_setup, (void *)d);
+ pwrdm_for_each_nolock(pwrdms_setup, (void *)d);
pm_dbg_dir = debugfs_create_dir("registers", d);
if (IS_ERR(pm_dbg_dir))
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 0ff5a6c53aa..378c2f61835 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -51,97 +51,112 @@ static void (*_omap_sram_idle)(u32 *addr, int save_state);
static struct powerdomain *mpu_pwrdm;
-/* PRCM Interrupt Handler for wakeups */
-static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+/*
+ * PRCM Interrupt Handler Helper Function
+ *
+ * The purpose of this function is to clear any wake-up events latched
+ * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
+ * may occur whilst attempting to clear a PM_WKST_x register and thus
+ * set another bit in this register. A while loop is used to ensure
+ * that any peripheral wake-up events occurring while attempting to
+ * clear the PM_WKST_x are detected and cleared.
+ */
+static int prcm_clear_mod_irqs(s16 module, u8 regs)
{
- u32 wkst, irqstatus_mpu;
- u32 fclk, iclk;
-
- /* WKUP */
- wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+ u32 wkst, fclk, iclk, clken;
+ u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
+ u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
+ u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
+ u16 grpsel_off = (regs == 3) ?
+ OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
+ int c = 0;
+
+ wkst = prm_read_mod_reg(module, wkst_off);
+ wkst &= prm_read_mod_reg(module, grpsel_off);
if (wkst) {
- iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
- fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
- cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
- cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
- prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
- while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
- cpu_relax();
- cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
- cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+ iclk = cm_read_mod_reg(module, iclk_off);
+ fclk = cm_read_mod_reg(module, fclk_off);
+ while (wkst) {
+ clken = wkst;
+ cm_set_mod_reg_bits(clken, module, iclk_off);
+ /*
+ * For USBHOST, we don't know whether HOST1 or
+ * HOST2 woke us up, so enable both f-clocks
+ */
+ if (module == OMAP3430ES2_USBHOST_MOD)
+ clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
+ cm_set_mod_reg_bits(clken, module, fclk_off);
+ prm_write_mod_reg(wkst, module, wkst_off);
+ wkst = prm_read_mod_reg(module, wkst_off);
+ c++;
+ }
+ cm_write_mod_reg(iclk, module, iclk_off);
+ cm_write_mod_reg(fclk, module, fclk_off);
}
- /* CORE */
- wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
- if (wkst) {
- iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
- fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
- cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
- cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
- prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
- while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
- cpu_relax();
- cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
- cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
- }
- wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
- if (wkst) {
- iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
- fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
- cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
- cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
- prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
- while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
- cpu_relax();
- cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
- cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
- }
+ return c;
+}
- /* PER */
- wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
- if (wkst) {
- iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
- fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
- cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
- cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
- prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
- while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
- cpu_relax();
- cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
- cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
- }
+static int _prcm_int_handle_wakeup(void)
+{
+ int c;
+ c = prcm_clear_mod_irqs(WKUP_MOD, 1);
+ c += prcm_clear_mod_irqs(CORE_MOD, 1);
+ c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1);
if (omap_rev() > OMAP3430_REV_ES1_0) {
- /* USBHOST */
- wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
- if (wkst) {
- iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
- CM_ICLKEN);
- fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
- CM_FCLKEN);
- cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
- CM_ICLKEN);
- cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
- CM_FCLKEN);
- prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
- PM_WKST);
- while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
- PM_WKST))
- cpu_relax();
- cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
- CM_ICLKEN);
- cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
- CM_FCLKEN);
- }
+ c += prcm_clear_mod_irqs(CORE_MOD, 3);
+ c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1);
}
- irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ return c;
+}
+
+/*
+ * PRCM Interrupt Handler
+ *
+ * The PRM_IRQSTATUS_MPU register indicates if there are any pending
+ * interrupts from the PRCM for the MPU. These bits must be cleared in
+ * order to clear the PRCM interrupt. The PRCM interrupt handler is
+ * implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear
+ * the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU
+ * register indicates that a wake-up event is pending for the MPU and
+ * this bit can only be cleared if the all the wake-up events latched
+ * in the various PM_WKST_x registers have been cleared. The interrupt
+ * handler is implemented using a do-while loop so that if a wake-up
+ * event occurred during the processing of the prcm interrupt handler
+ * (setting a bit in the corresponding PM_WKST_x register and thus
+ * preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register)
+ * this would be handled.
+ */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+ u32 irqstatus_mpu;
+ int c = 0;
+
+ do {
+ irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) {
+ c = _prcm_int_handle_wakeup();
+
+ /*
+ * Is the MPU PRCM interrupt handler racing with the
+ * IVA2 PRCM interrupt handler ?
+ */
+ WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup "
+ "but no wakeup sources are marked\n");
+ } else {
+ /* XXX we need to expand our PRCM interrupt handler */
+ WARN(1, "prcm: WARNING: PRCM interrupt received, but "
+ "no code to handle it (%08x)\n", irqstatus_mpu);
+ }
+
+ prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
- cpu_relax();
+ } while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
return IRQ_HANDLED;
}
@@ -624,6 +639,16 @@ static void __init prcm_setup_regs(void)
prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ /* Enable GPIO wakeups in PER */
+ prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
+ OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
+ OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN);
+ /* and allow them to wake up MPU */
+ prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
+ OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
+ OMAP3430_GRPSEL_GPIO6,
+ OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
+
/* Don't attach IVA interrupts */
prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 2594cbff394..f00289abd30 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -273,35 +273,50 @@ struct powerdomain *pwrdm_lookup(const char *name)
}
/**
- * pwrdm_for_each - call function on each registered clockdomain
+ * pwrdm_for_each_nolock - call function on each registered clockdomain
* @fn: callback function *
*
* Call the supplied function for each registered powerdomain. The
* callback function can return anything but 0 to bail out early from
- * the iterator. The callback function is called with the pwrdm_rwlock
- * held for reading, so no powerdomain structure manipulation
- * functions should be called from the callback, although hardware
- * powerdomain control functions are fine. Returns the last return
- * value of the callback function, which should be 0 for success or
- * anything else to indicate failure; or -EINVAL if the function
- * pointer is null.
+ * the iterator. Returns the last return value of the callback function, which
+ * should be 0 for success or anything else to indicate failure; or -EINVAL if
+ * the function pointer is null.
*/
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
- void *user)
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user)
{
struct powerdomain *temp_pwrdm;
- unsigned long flags;
int ret = 0;
if (!fn)
return -EINVAL;
- read_lock_irqsave(&pwrdm_rwlock, flags);
list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
ret = (*fn)(temp_pwrdm, user);
if (ret)
break;
}
+
+ return ret;
+}
+
+/**
+ * pwrdm_for_each - call function on each registered clockdomain
+ * @fn: callback function *
+ *
+ * This function is the same as 'pwrdm_for_each_nolock()', but keeps the
+ * &pwrdm_rwlock locked for reading, so no powerdomain structure manipulation
+ * functions should be called from the callback, although hardware powerdomain
+ * control functions are fine.
+ */
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user)
+{
+ unsigned long flags;
+ int ret;
+
+ read_lock_irqsave(&pwrdm_rwlock, flags);
+ ret = pwrdm_for_each_nolock(fn, user);
read_unlock_irqrestore(&pwrdm_rwlock, flags);
return ret;
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 3a8ee2272ad..983cc8c2008 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -155,7 +155,7 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table
static pxa_freqs_t pxa27x_freqs[] = {
{104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 },
- {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+ {156000, 104000, PXA27x_CCCR(1, 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 79141f86272..965480eb4fe 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -238,7 +238,7 @@ static struct resource csb726_lan_resources[] = {
};
struct smsc911x_platform_config csb726_lan_config = {
- .irq_type = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_32BIT,
.phy_interface = PHY_INTERFACE_MODE_MII,
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 8a5546e6d54..bb7b8198d0c 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -25,6 +25,7 @@ led-$(CONFIG_SA1100_CERF) += leds-cerf.o
obj-$(CONFIG_SA1100_COLLIE) += collie.o
+obj-$(CONFIG_SA1100_H3100) += h3600.o
obj-$(CONFIG_SA1100_H3600) += h3600.o
obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 8f5c13f4c93..295e25dd638 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -12,6 +12,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
+#include <asm/unwind.h>
#include "proc-macros.S"
@@ -121,11 +122,13 @@ ENTRY(v6_coherent_kern_range)
* - the Icache does not read data from the write buffer
*/
ENTRY(v6_coherent_user_range)
-
+ UNWIND(.fnstart )
#ifdef HARVARD_CACHE
bic r0, r0, #CACHE_LINE_SIZE - 1
-1: mcr p15, 0, r0, c7, c10, 1 @ clean D line
+1:
+ USER( mcr p15, 0, r0, c7, c10, 1 ) @ clean D line
add r0, r0, #CACHE_LINE_SIZE
+2:
cmp r0, r1
blo 1b
#endif
@@ -143,6 +146,19 @@ ENTRY(v6_coherent_user_range)
mov pc, lr
/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+ mov r0, r0, lsr #12
+ mov r0, r0, lsl #12
+ add r0, r0, #4096
+ b 2b
+ UNWIND(.fnend )
+ENDPROC(v6_coherent_user_range)
+ENDPROC(v6_coherent_kern_range)
+
+/*
* v6_flush_kern_dcache_page(kaddr)
*
* Ensure that the data held in the page kaddr is written back
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index bda0ec31a4e..e1bd9759617 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -13,6 +13,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
+#include <asm/unwind.h>
#include "proc-macros.S"
@@ -153,13 +154,16 @@ ENTRY(v7_coherent_kern_range)
* - the Icache does not read data from the write buffer
*/
ENTRY(v7_coherent_user_range)
+ UNWIND(.fnstart )
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
-1: mcr p15, 0, r0, c7, c11, 1 @ clean D line to the point of unification
+1:
+ USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification
dsb
- mcr p15, 0, r0, c7, c5, 1 @ invalidate I line
+ USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line
add r0, r0, r2
+2:
cmp r0, r1
blo 1b
mov r0, #0
@@ -167,6 +171,17 @@ ENTRY(v7_coherent_user_range)
dsb
isb
mov pc, lr
+
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+ mov r0, r0, lsr #12
+ mov r0, r0, lsl #12
+ add r0, r0, #4096
+ b 2b
+ UNWIND(.fnend )
ENDPROC(v7_coherent_kern_range)
ENDPROC(v7_coherent_user_range)
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index bc0099d5ae8..d0d17b6a370 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -153,14 +153,11 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
page = pfn_to_page(pfn);
mapping = page_mapping(page);
- if (mapping) {
#ifndef CONFIG_SMP
- int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
-
- if (dirty)
- __flush_dcache_page(mapping, page);
+ if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
+ __flush_dcache_page(mapping, page);
#endif
-
+ if (mapping) {
if (cache_is_vivt())
make_coherent(mapping, vma, addr, pfn);
else if (vma->vm_flags & VM_EXEC)
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index ae0e25f5a70..10e06801afb 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -292,6 +292,11 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
* down_read()
*/
might_sleep();
+#ifdef CONFIG_DEBUG_VM
+ if (!user_mode(regs) &&
+ !search_exception_tables(regs->ARM_pc))
+ goto no_context;
+#endif
}
fault = __do_page_fault(mm, addr, fsr, tsk);
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 73cae57fa70..30f82fb5918 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -46,6 +46,8 @@ void *kmap_atomic(struct page *page, enum km_type type)
if (!PageHighMem(page))
return page_address(page);
+ debug_kmap_atomic(type);
+
kmap = kmap_high_get(page);
if (kmap)
return kmap;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 877c492f8e1..40940d7ce4f 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -483,7 +483,7 @@ free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
/*
* Convert start_pfn/end_pfn to a struct page pointer.
*/
- start_pg = pfn_to_page(start_pfn);
+ start_pg = pfn_to_page(start_pfn - 1) + 1;
end_pg = pfn_to_page(end_pfn);
/*
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index fd3154ae69b..0eb676d7e80 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -829,10 +829,10 @@ EXPORT_SYMBOL(omap_free_dma);
*
* @param arb_rate
* @param max_fifo_depth
- * @param tparams - Number of thereads to reserve : DMA_THREAD_RESERVE_NORM
- * DMA_THREAD_RESERVE_ONET
- * DMA_THREAD_RESERVE_TWOT
- * DMA_THREAD_RESERVE_THREET
+ * @param tparams - Number of threads to reserve : DMA_THREAD_RESERVE_NORM
+ * DMA_THREAD_RESERVE_ONET
+ * DMA_THREAD_RESERVE_TWOT
+ * DMA_THREAD_RESERVE_THREET
*/
void
omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
@@ -844,11 +844,14 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
return;
}
+ if (max_fifo_depth == 0)
+ max_fifo_depth = 1;
if (arb_rate == 0)
arb_rate = 1;
- reg = (arb_rate & 0xff) << 16;
- reg |= (0xff & max_fifo_depth);
+ reg = 0xff & max_fifo_depth;
+ reg |= (0x3 & tparams) << 12;
+ reg |= (arb_rate & 0xff) << 16;
dma_write(reg, GCR);
}
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 11e73d9e892..f129efb3075 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -303,32 +303,21 @@ IS_OMAP_TYPE(3430, 0x3430)
#define cpu_is_omap2430() 0
#define cpu_is_omap3430() 0
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap730
-# define cpu_is_omap730() is_omap730()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-# undef cpu_is_omap850
-# define cpu_is_omap850() is_omap850()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap730
-# define cpu_is_omap730() 1
-# endif
-#endif
-#else
-# if defined(CONFIG_ARCH_OMAP850)
-# undef cpu_is_omap850
-# define cpu_is_omap850() 1
-# endif
-#endif
-
/*
* Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 330 vs. 1510 and 1611B/5912 vs. 1710.
+ * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710.
*/
+
+#if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap730
+# define cpu_is_omap730() is_omap730()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap850
+# define cpu_is_omap850() is_omap850()
+#endif
+
#if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap310
# undef cpu_is_omap1510
@@ -433,3 +422,5 @@ IS_OMAP_TYPE(3430, 0x3430)
int omap_chip_is(struct omap_chip_id oci);
void omap2_check_revision(void);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 6271d8556a4..fa6461423bd 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -135,6 +135,8 @@ struct powerdomain *pwrdm_lookup(const char *name);
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
void *user);
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user);
int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 57f7122a091..dc3fac3dd0e 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -47,7 +47,7 @@
* 'va': mpu virtual address
*
* 'c': contiguous memory area
- * 'd': dicontiguous memory area
+ * 'd': discontiguous memory area
* 'a': anonymous memory allocation
* '()': optional feature
*
@@ -363,8 +363,9 @@ void *da_to_va(struct iommu *obj, u32 da)
goto out;
}
va = area->va;
- mutex_unlock(&obj->mmap_lock);
out:
+ mutex_unlock(&obj->mmap_lock);
+
return va;
}
EXPORT_SYMBOL_GPL(da_to_va);
@@ -398,7 +399,7 @@ static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
{
/*
* Actually this is not necessary at all, just exists for
- * consistency of the code readibility.
+ * consistency of the code readability.
*/
BUG_ON(!sgt);
}
@@ -434,7 +435,7 @@ static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
{
/*
* Actually this is not necessary at all, just exists for
- * consistency of the code readibility
+ * consistency of the code readability
*/
BUG_ON(!sgt);
}
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 88ac9768f1c..e664b912d7b 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -595,7 +595,7 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx)
rx &= 1;
if (cpu_is_omap2430() || cpu_is_omap34xx()) {
w = OMAP_MCBSP_READ(io_base, RCCR);
- w |= (tx ? RDISABLE : 0);
+ w |= (rx ? RDISABLE : 0);
OMAP_MCBSP_WRITE(io_base, RCCR, w);
}
w = OMAP_MCBSP_READ(io_base, SPCR1);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 925f64711c3..75d1f26e5b1 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -270,7 +270,8 @@ void * omap_sram_push(void * start, unsigned long size)
omap_sram_ceil -= size;
omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
memcpy((void *)omap_sram_ceil, start, size);
- flush_icache_range((unsigned long)start, (unsigned long)(start + size));
+ flush_icache_range((unsigned long)omap_sram_ceil,
+ (unsigned long)(omap_sram_ceil + size));
return (void *)omap_sram_ceil;
}
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 11117a7ba91..4d36b784fb8 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -14,6 +14,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/sched.h>
#include <linux/list.h>
#include <linux/err.h>
#include <linux/clk.h>