diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/configs/nuc950_defconfig | 53 | ||||
| -rw-r--r-- | arch/arm/mach-w90x900/cpu.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-w90x900/dev.c | 42 | ||||
| -rw-r--r-- | arch/arm/mach-w90x900/include/mach/fb.h | 83 | ||||
| -rw-r--r-- | arch/arm/mach-w90x900/include/mach/regs-ldm.h | 253 | ||||
| -rw-r--r-- | arch/arm/mach-w90x900/mach-nuc950evb.c | 47 | ||||
| -rw-r--r-- | arch/arm/mach-w90x900/nuc950.c | 4 |
7 files changed, 482 insertions, 1 deletions
diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig index 97300ec478d..51cc2a260cb 100644 --- a/arch/arm/configs/nuc950_defconfig +++ b/arch/arm/configs/nuc950_defconfig @@ -590,8 +590,40 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_NUC900=y +CONFIG_GPM1040A0_320X240=y +CONFIG_FB_NUC900_DEBUG=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + + # # Display device support @@ -603,6 +635,25 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB_SUPPORT=y diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h index 4d58ba164e2..f8730b60bd7 100644 --- a/arch/arm/mach-w90x900/cpu.h +++ b/arch/arm/mach-w90x900/cpu.h @@ -57,3 +57,4 @@ extern struct platform_device nuc900_device_fmi; extern struct platform_device nuc900_device_kpi; extern struct platform_device nuc900_device_rtc; extern struct platform_device nuc900_device_ts; +extern struct platform_device nuc900_device_lcd; diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index ec711f4b401..48876122df9 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -34,6 +34,7 @@ #include <mach/regs-serial.h> #include <mach/nuc900_spi.h> #include <mach/map.h> +#include <mach/fb.h> #include "cpu.h" @@ -380,6 +381,47 @@ struct platform_device nuc900_device_kpi = { .resource = nuc900_kpi_resource, }; +#ifdef CONFIG_FB_NUC900 + +static struct resource nuc900_lcd_resource[] = { + [0] = { + .start = W90X900_PA_LCD, + .end = W90X900_PA_LCD + W90X900_SZ_LCD - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_LCD, + .end = IRQ_LCD, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 nuc900_device_lcd_dmamask = -1; +struct platform_device nuc900_device_lcd = { + .name = "nuc900-lcd", + .id = -1, + .num_resources = ARRAY_SIZE(nuc900_lcd_resource), + .resource = nuc900_lcd_resource, + .dev = { + .dma_mask = &nuc900_device_lcd_dmamask, + .coherent_dma_mask = -1, + } +}; + +void nuc900_fb_set_platdata(struct nuc900fb_mach_info *pd) +{ + struct nuc900fb_mach_info *npd; + + npd = kmalloc(sizeof(*npd), GFP_KERNEL); + if (npd) { + memcpy(npd, pd, sizeof(*npd)); + nuc900_device_lcd.dev.platform_data = npd; + } else { + printk(KERN_ERR "no memory for LCD platform data\n"); + } +} +#endif + /*Here should be your evb resourse,such as LCD*/ static struct platform_device *nuc900_public_dev[] __initdata = { diff --git a/arch/arm/mach-w90x900/include/mach/fb.h b/arch/arm/mach-w90x900/include/mach/fb.h new file mode 100644 index 00000000000..cec5ece765e --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/fb.h @@ -0,0 +1,83 @@ +/* linux/include/asm/arch-nuc900/fb.h + * + * Copyright (c) 2008 Nuvoton technology corporation + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Changelog: + * + * 2008/08/26 vincen.zswan modify this file for LCD. + */ + +#ifndef __ASM_ARM_FB_H +#define __ASM_ARM_FB_H + + + +/* LCD Controller Hardware Desc */ +struct nuc900fb_hw { + unsigned int lcd_dccs; + unsigned int lcd_device_ctrl; + unsigned int lcd_mpulcd_cmd; + unsigned int lcd_int_cs; + unsigned int lcd_crtc_size; + unsigned int lcd_crtc_dend; + unsigned int lcd_crtc_hr; + unsigned int lcd_crtc_hsync; + unsigned int lcd_crtc_vr; + unsigned int lcd_va_baddr0; + unsigned int lcd_va_baddr1; + unsigned int lcd_va_fbctrl; + unsigned int lcd_va_scale; + unsigned int lcd_va_test; + unsigned int lcd_va_win; + unsigned int lcd_va_stuff; +}; + +/* LCD Display Description */ +struct nuc900fb_display { + /* LCD Image type */ + unsigned type; + + /* LCD Screen Size */ + unsigned short width; + unsigned short height; + + /* LCD Screen Info */ + unsigned short xres; + unsigned short yres; + unsigned short bpp; + + unsigned long pixclock; + unsigned short left_margin; + unsigned short right_margin; + unsigned short hsync_len; + unsigned short upper_margin; + unsigned short lower_margin; + unsigned short vsync_len; + + /* hardware special register value */ + unsigned int dccs; + unsigned int devctl; + unsigned int fbctrl; + unsigned int scale; +}; + +struct nuc900fb_mach_info { + struct nuc900fb_display *displays; + unsigned num_displays; + unsigned default_display; + /* GPIO Setting Info */ + unsigned gpio_dir; + unsigned gpio_dir_mask; + unsigned gpio_data; + unsigned gpio_data_mask; +}; + +extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *); + +#endif /* __ASM_ARM_FB_H */ diff --git a/arch/arm/mach-w90x900/include/mach/regs-ldm.h b/arch/arm/mach-w90x900/include/mach/regs-ldm.h new file mode 100644 index 00000000000..e9d480a5b23 --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/regs-ldm.h @@ -0,0 +1,253 @@ +/* + * arch/arm/mach-w90x900/include/mach/regs-serial.h + * + * Copyright (c) 2009 Nuvoton technology corporation + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Description: + * Nuvoton Display, LCM Register list + * Author: Wang Qiang (rurality.linux@gmail.com) 2009/12/11 + * + */ + + +#ifndef __ASM_ARM_W90X900_REGS_LDM_H +#define __ASM_ARM_W90X900_REGS_LDM_H + +#include <mach/map.h> + +/* Display Controller Control/Status Register */ +#define REG_LCM_DCCS (0x00) + +#define LCM_DCCS_ENG_RST (1 << 0) +#define LCM_DCCS_VA_EN (1 << 1) +#define LCM_DCCS_OSD_EN (1 << 2) +#define LCM_DCCS_DISP_OUT_EN (1 << 3) +#define LCM_DCCS_DISP_INT_EN (1 << 4) +#define LCM_DCCS_CMD_ON (1 << 5) +#define LCM_DCCS_FIELD_INTR (1 << 6) +#define LCM_DCCS_SINGLE (1 << 7) + +enum LCM_DCCS_VA_SRC { + LCM_DCCS_VA_SRC_YUV422 = (0 << 8), + LCM_DCCS_VA_SRC_YCBCR422 = (1 << 8), + LCM_DCCS_VA_SRC_RGB888 = (2 << 8), + LCM_DCCS_VA_SRC_RGB666 = (3 << 8), + LCM_DCCS_VA_SRC_RGB565 = (4 << 8), + LCM_DCCS_VA_SRC_RGB444LOW = (5 << 8), + LCM_DCCS_VA_SRC_RGB444HIGH = (7 << 8) +}; + + +/* Display Device Control Register */ +#define REG_LCM_DEV_CTRL (0x04) + +enum LCM_DEV_CTRL_SWAP_YCbCr { + LCM_DEV_CTRL_SWAP_UYVY = (0 << 1), + LCM_DEV_CTRL_SWAP_YUYV = (1 << 1), + LCM_DEV_CTRL_SWAP_VYUY = (2 << 1), + LCM_DEV_CTRL_SWAP_YVYU = (3 << 1) +}; + +enum LCM_DEV_CTRL_RGB_SHIFT { + LCM_DEV_CTRL_RGB_SHIFT_NOT = (0 << 3), + LCM_DEV_CTRL_RGB_SHIFT_ONECYCLE = (1 << 3), + LCM_DEV_CTRL_RGB_SHIFT_TWOCYCLE = (2 << 3), + LCM_DEV_CTRL_RGB_SHIFT_NOT_DEF = (3 << 3) +}; + +enum LCM_DEV_CTRL_DEVICE { + LCM_DEV_CTRL_DEVICE_YUV422 = (0 << 5), + LCM_DEV_CTRL_DEVICE_YUV444 = (1 << 5), + LCM_DEV_CTRL_DEVICE_UNIPAC = (4 << 5), + LCM_DEV_CTRL_DEVICE_SEIKO_EPSON = (5 << 5), + LCM_DEV_CTRL_DEVICE_HIGH_COLOR = (6 << 5), + LCM_DEV_CTRL_DEVICE_MPU = (7 << 5) +}; + +#define LCM_DEV_CTRL_LCD_DDA (8) +#define LCM_DEV_CTRL_YUV2CCIR (16) + +enum LCM_DEV_CTRL_LCD_SEL { + LCM_DEV_CTRL_LCD_SEL_RGB_GBR = (0 << 17), + LCM_DEV_CTRL_LCD_SEL_BGR_RBG = (1 << 17), + LCM_DEV_CTRL_LCD_SEL_GBR_RGB = (2 << 17), + LCM_DEV_CTRL_LCD_SEL_RBG_BGR = (3 << 17) +}; + +enum LCM_DEV_CTRL_FAL_D { + LCM_DEV_CTRL_FAL_D_FALLING = (0 << 19), + LCM_DEV_CTRL_FAL_D_RISING = (1 << 19), +}; + +enum LCM_DEV_CTRL_H_POL { + LCM_DEV_CTRL_H_POL_LOW = (0 << 20), + LCM_DEV_CTRL_H_POL_HIGH = (1 << 20), +}; + +enum LCM_DEV_CTRL_V_POL { + LCM_DEV_CTRL_V_POL_LOW = (0 << 21), + LCM_DEV_CTRL_V_POL_HIGH = (1 << 21), +}; + +enum LCM_DEV_CTRL_VR_LACE { + LCM_DEV_CTRL_VR_LACE_NINTERLACE = (0 << 22), + LCM_DEV_CTRL_VR_LACE_INTERLACE = (1 << 22), +}; + +enum LCM_DEV_CTRL_LACE { + LCM_DEV_CTRL_LACE_NINTERLACE = (0 << 23), + LCM_DEV_CTRL_LACE_INTERLACE = (1 << 23), +}; + +enum LCM_DEV_CTRL_RGB_SCALE { + LCM_DEV_CTRL_RGB_SCALE_4096 = (0 << 24), + LCM_DEV_CTRL_RGB_SCALE_65536 = (1 << 24), + LCM_DEV_CTRL_RGB_SCALE_262144 = (2 << 24), + LCM_DEV_CTRL_RGB_SCALE_16777216 = (3 << 24), +}; + +enum LCM_DEV_CTRL_DBWORD { + LCM_DEV_CTRL_DBWORD_HALFWORD = (0 << 26), + LCM_DEV_CTRL_DBWORD_FULLWORD = (1 << 26), +}; + +enum LCM_DEV_CTRL_MPU68 { + LCM_DEV_CTRL_MPU68_80_SERIES = (0 << 27), + LCM_DEV_CTRL_MPU68_68_SERIES = (1 << 27), +}; + +enum LCM_DEV_CTRL_DE_POL { + LCM_DEV_CTRL_DE_POL_HIGH = (0 << 28), + LCM_DEV_CTRL_DE_POL_LOW = (1 << 28), +}; + +#define LCM_DEV_CTRL_CMD16 (29) +#define LCM_DEV_CTRL_CM16t18 (30) +#define LCM_DEV_CTRL_CMD_LOW (31) + +/* MPU-Interface LCD Write Command */ +#define REG_LCM_MPU_CMD (0x08) + +/* Interrupt Control/Status Register */ +#define REG_LCM_INT_CS (0x0c) +#define LCM_INT_CS_DISP_F_EN (1 << 0) +#define LCM_INT_CS_UNDERRUN_EN (1 << 1) +#define LCM_INT_CS_BUS_ERROR_INT (1 << 28) +#define LCM_INT_CS_UNDERRUN_INT (1 << 29) +#define LCM_INT_CS_DISP_F_STATUS (1 << 30) +#define LCM_INT_CS_DISP_F_INT (1 << 31) + +/* CRTC Display Size Control Register */ +#define REG_LCM_CRTC_SIZE (0x10) +#define LCM_CRTC_SIZE_VTTVAL(x) ((x) << 16) +#define LCM_CRTC_SIZE_HTTVAL(x) ((x) << 0) + +/* CRTC Display Enable End */ +#define REG_LCM_CRTC_DEND (0x14) +#define LCM_CRTC_DEND_VDENDVAL(x) ((x) << 16) +#define LCM_CRTC_DEND_HDENDVAL(x) ((x) << 0) + +/* CRTC Internal Horizontal Retrace Control Register */ +#define REG_LCM_CRTC_HR (0x18) +#define LCM_CRTC_HR_EVAL(x) ((x) << 16) +#define LCM_CRTC_HR_SVAL(x) ((x) << 0) + +/* CRTC Horizontal Sync Control Register */ +#define REG_LCM_CRTC_HSYNC (0x1C) +#define LCM_CRTC_HSYNC_SHIFTVAL(x) ((x) << 30) +#define LCM_CRTC_HSYNC_EVAL(x) ((x) << 16) +#define LCM_CRTC_HSYNC_SVAL(x) ((x) << 0) + +/* CRTC Internal Vertical Retrace Control Register */ +#define REG_LCM_CRTC_VR (0x20) +#define LCM_CRTC_VR_EVAL(x) ((x) << 16) +#define LCM_CRTC_VR_SVAL(x) ((x) << 0) + +/* Video Stream Frame Buffer-0 Starting Address */ +#define REG_LCM_VA_BADDR0 (0x24) + +/* Video Stream Frame Buffer-1 Starting Address */ +#define REG_LCM_VA_BADDR1 (0x28) + +/* Video Stream Frame Buffer Control Register */ +#define REG_LCM_VA_FBCTRL (0x2C) +#define LCM_VA_FBCTRL_IO_REGION_HALF (1 << 28) +#define LCM_VA_FBCTRL_FIELD_DUAL (1 << 29) +#define LCM_VA_FBCTRL_START_BUF (1 << 30) +#define LCM_VA_FBCTRL_DB_EN (1 << 31) + +/* Video Stream Scaling Control Register */ +#define REG_LCM_VA_SCALE (0x30) +#define LCM_VA_SCALE_XCOPY_INTERPOLATION (0 << 15) +#define LCM_VA_SCALE_XCOPY_DUPLICATION (1 << 15) + +/* Image Stream Active Window Coordinates */ +#define REG_LCM_VA_WIN (0x38) + +/* Image Stream Stuff Pixel */ +#define REG_LCM_VA_STUFF (0x3C) + +/* OSD Window Starting Coordinates */ +#define REG_LCM_OSD_WINS (0x40) + +/* OSD Window Ending Coordinates */ +#define REG_LCM_OSD_WINE (0x44) + +/* OSD Stream Frame Buffer Starting Address */ +#define REG_LCM_OSD_BADDR (0x48) + +/* OSD Stream Frame Buffer Control Register */ +#define REG_LCM_OSD_FBCTRL (0x4c) + +/* OSD Overlay Control Register */ +#define REG_LCM_OSD_OVERLAY (0x50) + +/* OSD Overlay Color-Key Pattern Register */ +#define REG_LCM_OSD_CKEY (0x54) + +/* OSD Overlay Color-Key Mask Register */ +#define REG_LCM_OSD_CMASK (0x58) + +/* OSD Window Skip1 Register */ +#define REG_LCM_OSD_SKIP1 (0x5C) + +/* OSD Window Skip2 Register */ +#define REG_LCM_OSD_SKIP2 (0x60) + +/* OSD horizontal up scaling control register */ +#define REG_LCM_OSD_SCALE (0x64) + +/* MPU Vsync control register */ +#define REG_LCM_MPU_VSYNC (0x68) + +/* Hardware cursor control Register */ +#define REG_LCM_HC_CTRL (0x6C) + +/* Hardware cursot tip point potison on va picture */ +#define REG_LCM_HC_POS (0x70) + +/* Hardware Cursor Window Buffer Control Register */ +#define REG_LCM_HC_WBCTRL (0x74) + +/* Hardware cursor memory base address register */ +#define REG_LCM_HC_BADDR (0x78) + +/* Hardware cursor color ram register mapped to bpp = 0 */ +#define REG_LCM_HC_COLOR0 (0x7C) + +/* Hardware cursor color ram register mapped to bpp = 1 */ +#define REG_LCM_HC_COLOR1 (0x80) + +/* Hardware cursor color ram register mapped to bpp = 2 */ +#define REG_LCM_HC_COLOR2 (0x84) + +/* Hardware cursor color ram register mapped to bpp = 3 */ +#define REG_LCM_HC_COLOR3 (0x88) + +#endif /* __ASM_ARM_W90X900_REGS_LDM_H */ diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c index cef903bcccd..b3edc3cccf5 100644 --- a/arch/arm/mach-w90x900/mach-nuc950evb.c +++ b/arch/arm/mach-w90x900/mach-nuc950evb.c @@ -10,6 +10,8 @@ * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation;version 2 of the License. + * history: + * Wang Qiang (rurality.linux@gmail.com) add LCD support * */ @@ -18,9 +20,51 @@ #include <asm/mach/map.h> #include <asm/mach-types.h> #include <mach/map.h> +#include <mach/regs-ldm.h> +#include <mach/fb.h> #include "nuc950.h" +#ifdef CONFIG_FB_NUC900 +/* LCD Controller */ +static struct nuc900fb_display __initdata nuc950_lcd_info[] = { + /* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */ + [0] = { + .type = LCM_DCCS_VA_SRC_RGB565, + .width = 320, + .height = 240, + .xres = 320, + .yres = 240, + .bpp = 16, + .pixclock = 200000, + .left_margin = 34, + .right_margin = 54, + .hsync_len = 10, + .upper_margin = 18, + .lower_margin = 4, + .vsync_len = 1, + .dccs = 0x8e00041a, + .devctl = 0x060800c0, + .fbctrl = 0x00a000a0, + .scale = 0x04000400, + }, +}; + +static struct nuc900fb_mach_info nuc950_fb_info __initdata = { +#if defined(CONFIG_GPM1040A0_320X240) + .displays = &nuc950_lcd_info[0], +#else + .displays = nuc950_lcd_info, +#endif + .num_displays = ARRAY_SIZE(nuc950_lcd_info), + .default_display = 0, + .gpio_dir = 0x00000004, + .gpio_dir_mask = 0xFFFFFFFD, + .gpio_data = 0x00000004, + .gpio_data_mask = 0xFFFFFFFD, +}; +#endif + static void __init nuc950evb_map_io(void) { nuc950_map_io(); @@ -30,6 +74,9 @@ static void __init nuc950evb_map_io(void) static void __init nuc950evb_init(void) { nuc950_board_init(); +#ifdef CONFIG_FB_NUC900 + nuc900_fb_set_platdata(&nuc950_fb_info); +#endif } MACHINE_START(W90P950EVB, "W90P950EVB") diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c index 149508116d1..4d1f1ab044c 100644 --- a/arch/arm/mach-w90x900/nuc950.c +++ b/arch/arm/mach-w90x900/nuc950.c @@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <asm/mach/map.h> #include <mach/hardware.h> + #include "cpu.h" /* define specific CPU platform device */ @@ -25,6 +26,9 @@ static struct platform_device *nuc950_dev[] __initdata = { &nuc900_device_kpi, &nuc900_device_fmi, +#ifdef CONFIG_FB_NUC900 + &nuc900_device_lcd, +#endif }; /* define specific CPU platform io map */ |