diff options
Diffstat (limited to 'arch/arm')
191 files changed, 9690 insertions, 4745 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e02b893fb90..e60ec54df33 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -454,6 +454,7 @@ config ARCH_MXC select ARCH_MTD_XIP select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK help Support for Freescale MXC/iMX-based family of processors @@ -486,8 +487,6 @@ config ARCH_PXA select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT @@ -585,6 +584,8 @@ config ARCH_DAVINCI select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select ZONE_DMA + select HAVE_IDE + select COMMON_CLKDEV help Support for TI's DaVinci platform. @@ -740,6 +741,56 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config ARM_ERRATA_411920 + bool "ARM errata: Invalidation of the Instruction Cache operation can fail" + depends on CPU_V6 && !SMP + help + Invalidation of the Instruction Cache operation can + fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. + It does not affect the MPCore. This option enables the ARM Ltd. + recommended workaround. + +config ARM_ERRATA_430973 + bool "ARM errata: Stale prediction on replaced interworking branch" + depends on CPU_V7 + help + This option enables the workaround for the 430973 Cortex-A8 + (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb + interworking branch is replaced with another code sequence at the + same virtual address, whether due to self-modifying code or virtual + to physical address re-mapping, Cortex-A8 does not recover from the + stale interworking branch prediction. This results in Cortex-A8 + executing the new code sequence in the incorrect ARM or Thumb state. + The workaround enables the BTB/BTAC operations by setting ACTLR.IBE + and also flushes the branch target cache at every context switch. + Note that setting specific bits in the ACTLR register may not be + available in non-secure mode. + +config ARM_ERRATA_458693 + bool "ARM errata: Processor deadlock when a false hazard is created" + depends on CPU_V7 + help + This option enables the workaround for the 458693 Cortex-A8 (r2p0) + erratum. For very specific sequences of memory operations, it is + possible for a hazard condition intended for a cache line to instead + be incorrectly associated with a different cache line. This false + hazard might then cause a processor deadlock. The workaround enables + the L1 caching of the NEON accesses and disables the PLD instruction + in the ACTLR register. Note that setting specific bits in the ACTLR + register may not be available in non-secure mode. + +config ARM_ERRATA_460075 + bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" + depends on CPU_V7 + help + This option enables the workaround for the 460075 Cortex-A8 (r2p0) + erratum. Any asynchronous access to the L2 cache may encounter a + situation in which recent store transactions to the L2 cache are lost + and overwritten with stale memory contents from external memory. The + workaround disables the write-allocate mode for the L2 cache via the + ACTLR register. Note that setting specific bits in the ACTLR register + may not be available in non-secure mode. + endmenu source "arch/arm/common/Kconfig" @@ -1171,12 +1222,6 @@ config CPU_FREQ_IMX If in doubt, say N. -config CPU_FREQ_PXA - bool - depends on CPU_FREQ && ARCH_PXA && PXA25x - default y - select CPU_FREQ_DEFAULT_GOV_USERSPACE - endif source "drivers/cpuidle/Kconfig" diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index ecf0bfbab10..b2a781d9ce0 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -85,12 +85,11 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, writel(32, base + VIC_PL190_DEF_VECT_ADDR); for (i = 0; i < 32; i++) { - unsigned int irq = irq_start + i; - - set_irq_chip(irq, &vic_chip); - set_irq_chip_data(irq, base); - if (vic_sources & (1 << i)) { + unsigned int irq = irq_start + i; + + set_irq_chip(irq, &vic_chip); + set_irq_chip_data(irq, base); set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig new file mode 100644 index 00000000000..eb2738b5be5 --- /dev/null +++ b/arch/arm/configs/davinci_all_defconfig @@ -0,0 +1,1784 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 15 08:16:53 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_DAVINCI=y +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI DaVinci Implementations +# + +# +# DaVinci Core Type +# +CONFIG_ARCH_DAVINCI_DM644x=y + +# +# DaVinci Board Type +# +CONFIG_MACH_DAVINCI_EVM=y +CONFIG_DAVINCI_MUX=y +CONFIG_DAVINCI_MUX_DEBUG=y +CONFIG_DAVINCI_MUX_WARNINGS=y +CONFIG_DAVINCI_RESET_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_LEDS=y +# CONFIG_LEDS_CPU is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_DAVINCI=m +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=m + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=m +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y +CONFIG_BLK_DEV_PALMCHIP_BK3710=m +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_LXT_PHY=y +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +CONFIG_LSI_ET1011C_PHY=y +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_XTKBD=m +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_DAVINCI=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +CONFIG_GPIO_PCF857X=m + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_DAVINCI_WATCHDOG=m + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_RADIO_ADAPTERS is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_SOC=m +# CONFIG_SND_DAVINCI_SOC is not set +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=m +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=m +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=m +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_SOC=y + +# +# DaVinci 35x and 644x USB support +# +# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_PERIPHERAL=y +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_MUSB_PIO_ONLY=y +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/imx27ads_defconfig b/arch/arm/configs/imx27ads_defconfig deleted file mode 100644 index bcd95b8dd2d..00000000000 --- a/arch/arm/configs/imx27ads_defconfig +++ /dev/null @@ -1,826 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:29:34 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -CONFIG_ARCH_MX2=y -# CONFIG_ARCH_MX3 is not set - -# -# MX2 family CPU support -# -CONFIG_MACH_MX27=y - -# -# MX2 Platforms -# -CONFIG_MACH_MX27ADS=y -# CONFIG_MACH_PCM038 is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_VFP is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x00000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_FEC_OLD is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_IMX is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# - -# -# I2C GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index c367ae44012..dcf8153a947 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc5 -# Tue Mar 3 21:45:57 2009 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 11:58:57 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -89,6 +89,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -101,6 +102,7 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set @@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -237,6 +241,7 @@ CONFIG_AEABI=y CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -293,7 +300,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set -# CONFIG_NL80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=y # @@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -687,6 +696,7 @@ CONFIG_SATA_MV=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -724,8 +734,10 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y CONFIG_LIBERTAS=y # CONFIG_LIBERTAS_USB is not set CONFIG_LIBERTAS_SDIO=y +# CONFIG_LIBERTAS_SPI is not set # CONFIG_LIBERTAS_DEBUG is not set # CONFIG_LIBERTAS_THINFIRM is not set -# CONFIG_HERMES is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set @@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set # CONFIG_ATH5K is not set # CONFIG_ATH9K is not set +# CONFIG_AR9170_USB is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set -# CONFIG_IWLCORE is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +# CONFIG_HERMES is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -1361,6 +1389,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1551,11 +1589,15 @@ CONFIG_TRACING=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1682,7 +1728,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 82428c2f234..f56837f69ca 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -1183,7 +1183,11 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_SA1100=y # CONFIG_RTC_DRV_PXA is not set # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +CONFIG_REGULATOR_BQ24022=y # CONFIG_UIO is not set # CONFIG_STAGING is not set diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index b0698722e0c..398274b0771 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -1,11 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Fri Jun 13 02:57:32 2008 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 14:22:12 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y @@ -22,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -54,32 +62,35 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -87,10 +98,9 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -98,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -127,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -152,28 +159,23 @@ CONFIG_ARCH_MV78XX0=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Marvell MV78xx0 Implementations # CONFIG_MACH_DB78X00_BP=y CONFIG_MACH_RD78X00_MASA=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_ORION=y # @@ -199,6 +201,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_CACHE_FEROCEON_L2=y +# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set # # Bus support @@ -208,6 +211,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -217,25 +222,33 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -248,6 +261,11 @@ CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -263,6 +281,8 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -271,10 +291,6 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -310,7 +326,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -325,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -334,26 +351,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -368,6 +382,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -376,6 +392,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -429,9 +446,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -456,6 +471,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -466,6 +482,11 @@ CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -486,10 +507,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -547,7 +578,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -566,6 +601,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -632,11 +669,15 @@ CONFIG_SATA_MV=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -644,7 +685,26 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -654,19 +714,25 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -676,18 +742,20 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -701,6 +769,9 @@ CONFIG_NETDEV_1000=y CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -709,7 +780,10 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -786,11 +860,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -799,44 +873,63 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set -CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -848,6 +941,7 @@ CONFIG_I2C_MV64XXX=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -855,14 +949,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -877,10 +974,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -900,20 +1002,28 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -944,10 +1054,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -958,9 +1064,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -978,6 +1111,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -986,12 +1122,15 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -999,20 +1138,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1028,7 +1167,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1041,7 +1179,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1049,7 +1187,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1059,14 +1196,29 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1074,7 +1226,12 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1105,6 +1262,8 @@ CONFIG_RTC_DRV_RS5C372=y CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1114,18 +1273,25 @@ CONFIG_RTC_DRV_M41T80=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1134,14 +1300,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1151,6 +1328,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1174,15 +1356,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1202,25 +1382,27 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1301,11 +1483,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1320,22 +1507,55 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1347,17 +1567,27 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1393,6 +1623,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1422,25 +1656,32 @@ CONFIG_CRYPTO_PCBC=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mx31ads_defconfig b/arch/arm/configs/mx1_defconfig index e05271753e1..0200d67e30b 100644 --- a/arch/arm/configs/mx31ads_defconfig +++ b/arch/arm/configs/mx1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:21:11 2008 +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 11:11:33 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -12,6 +12,7 @@ CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,15 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -59,26 +68,26 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -88,11 +97,10 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -119,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -129,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -145,55 +150,55 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_ARCH_MX1ADS=y # # Freescale MXC Implementations # +CONFIG_ARCH_MX1=y # CONFIG_ARCH_MX2 is not set -CONFIG_ARCH_MX3=y +# CONFIG_ARCH_MX3 is not set # -# MX3 Options +# MX1 platforms: # -CONFIG_MACH_MX31ADS=y -# CONFIG_MACH_PCM037 is not set +CONFIG_MACH_MXLADS=y +CONFIG_MACH_SCB9328=y +CONFIG_MXC_IRQ_PRIOR=y +# CONFIG_MXC_PWM is not set # # Processor Type # CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y @@ -203,7 +208,7 @@ CONFIG_CPU_CP15_MMU=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_OUTER_CACHE is not set # @@ -220,25 +225,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -251,30 +263,41 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # # # At least one emulation must be selected # -CONFIG_VFP=y +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -283,11 +306,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -306,12 +324,11 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -324,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -333,7 +351,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -344,14 +364,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -366,16 +380,16 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -399,36 +413,31 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set +CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set # CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_RAM=y +# CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -446,17 +455,15 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -476,23 +483,51 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -502,7 +537,10 @@ CONFIG_MII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -542,46 +580,124 @@ CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# GPIO Support +# Memory mapped GPIO expanders: # # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# # # SPI GPIO expanders: # -# CONFIG_W1 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -604,36 +720,131 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_LOGO is not set +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # -# Sound +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +CONFIG_USB_GADGET_IMX=y +CONFIG_USB_IMX=y +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + # -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -643,6 +854,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -660,15 +876,13 @@ CONFIG_INOTIFY_USER=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -687,25 +901,30 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set @@ -724,9 +943,9 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # -CONFIG_PRINTK_TIME=y -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -734,8 +953,31 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set # @@ -743,15 +985,28 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -766,7 +1021,7 @@ CONFIG_CRYPTO=y # # Block modes # -# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set @@ -785,8 +1040,12 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -803,7 +1062,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set +CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set @@ -816,24 +1075,31 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set -# CONFIG_CRYPTO_HW is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/mx27_defconfig index 41429a00f58..083516cd0d7 100644 --- a/arch/arm/configs/pcm038_defconfig +++ b/arch/arm/configs/mx27_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:38:36 2008 +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 10:18:06 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -12,6 +12,7 @@ CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,47 +40,58 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -88,11 +99,10 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_PROC_PAGE_MONITOR is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,12 +110,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -119,7 +127,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -129,11 +137,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -145,46 +152,44 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations # +# CONFIG_ARCH_MX1 is not set CONFIG_ARCH_MX2=y # CONFIG_ARCH_MX3 is not set - -# -# MX2 family CPU support -# +# CONFIG_MACH_MX21 is not set CONFIG_MACH_MX27=y # -# MX2 Platforms +# MX2 platforms: # -# CONFIG_MACH_MX27ADS is not set +CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y CONFIG_MACH_PCM970_BASEBOARD=y +CONFIG_MXC_IRQ_PRIOR=y +CONFIG_MXC_PWM=y # # Processor Type @@ -209,6 +214,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set # CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -224,25 +230,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -255,30 +268,44 @@ CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # # # At least one emulation must be selected # +CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y +# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -293,7 +320,7 @@ CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_DHCP=y # CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set @@ -323,6 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -332,26 +360,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -366,12 +391,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -426,9 +454,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x00000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -452,6 +478,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -477,7 +508,7 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -491,12 +522,20 @@ CONFIG_NET_ETHERNET=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_FEC_OLD=y +CONFIG_FEC=y +# CONFIG_FEC2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -505,7 +544,10 @@ CONFIG_FEC_OLD=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -541,12 +583,15 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_INPUT_MISC is not set # @@ -559,6 +604,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -573,42 +619,55 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# # CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -622,47 +681,83 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# GPIO Support +# Memory mapped GPIO expanders: # # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # +# PCI GPIO expanders: +# + +# # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set -# CONFIG_W1 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -683,7 +778,7 @@ CONFIG_VIDEO_MEDIA=y # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=y -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=y CONFIG_MEDIA_TUNER_TDA8290=y CONFIG_MEDIA_TUNER_TDA9887=y @@ -692,16 +787,17 @@ CONFIG_MEDIA_TUNER_TEA5767=y CONFIG_MEDIA_TUNER_MT20XX=y CONFIG_MEDIA_TUNER_XC2028=y CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set # CONFIG_SOC_CAMERA is not set # CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set @@ -714,9 +810,10 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -732,8 +829,12 @@ CONFIG_FB=y # # Frame buffer hardware drivers # +CONFIG_FB_IMX=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -761,14 +862,29 @@ CONFIG_FONT_8x8=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -800,42 +916,56 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -844,6 +974,11 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -861,15 +996,13 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -889,25 +1022,27 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -972,12 +1107,41 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set # @@ -985,24 +1149,26 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mx31moboard_defconfig b/arch/arm/configs/mx31moboard_defconfig deleted file mode 100644 index e90f86d6dee..00000000000 --- a/arch/arm/configs/mx31moboard_defconfig +++ /dev/null @@ -1,790 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc5 -# Fri Oct 24 11:41:22 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_MV78XX0 is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -# CONFIG_ARCH_MX2 is not set -CONFIG_ARCH_MX3=y - -# -# MX3 Options -# -# CONFIG_MACH_MX31ADS is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_MX31LITE is not set -CONFIG_MACH_MX31MOBOARD=y -# CONFIG_MXC_IRQ_PRIOR is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_GPIO_SYSFS is not set - -# -# I2C GPIO expanders: -# - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set - -# -# Voltage and Current regulators -# -# CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_FRAME_POINTER=y -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/mx31litekit_defconfig b/arch/arm/configs/mx3_defconfig index 4f41c413568..20ada526f6d 100644 --- a/arch/arm/configs/mx31litekit_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -1,17 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Fri Jun 13 14:23:39 2008 +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 11:06:37 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,11 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -55,27 +68,26 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -85,11 +97,10 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -97,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -116,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -126,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -142,39 +150,47 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations # +# CONFIG_ARCH_MX1 is not set +# CONFIG_ARCH_MX2 is not set CONFIG_ARCH_MX3=y +CONFIG_ARCH_MX31=y # -# MX3 Options +# MX3 platforms: # -# CONFIG_MACH_MX31ADS is not set +CONFIG_MACH_MX31ADS=y +CONFIG_MACH_MX31ADS_WM1133_EV1=y +CONFIG_MACH_PCM037=y CONFIG_MACH_MX31LITE=y +CONFIG_MACH_MX31_3DS=y +CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_QONG=y +CONFIG_MXC_IRQ_PRIOR=y +CONFIG_MXC_PWM=y # # Processor Type @@ -200,45 +216,50 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_L2X0=y +CONFIG_COMMON_CLKDEV=y # # Bus support # # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -# CONFIG_PCMCIA is not set - -# -# PC-card bridges -# +# CONFIG_PCCARD is not set # # Kernel Features # -# CONFIG_TICK_ONESHOT is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -251,33 +272,42 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # # # At least one emulation must be selected # +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y # # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # CONFIG_PM=y -# CONFIG_PM_DEBUG is not set -# CONFIG_SUSPEND is not set +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -286,11 +316,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -309,12 +334,11 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -327,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -336,7 +361,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -347,14 +374,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -369,18 +390,16 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -404,36 +423,31 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set +CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set # CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_RAM=y +# CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -451,18 +465,15 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -476,63 +487,58 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_NONISA_IRQ=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -541,16 +547,10 @@ CONFIG_MII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # -# USB Network Adapters +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -562,43 +562,7 @@ CONFIG_MII=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -609,10 +573,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # # Character devices # -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_VT is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set @@ -624,45 +585,132 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set +# CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# Watchdog Device Drivers +# Memory mapped GPIO expanders: # -# CONFIG_SOFT_WATCHDOG is not set # -# USB-based Watchdog Cards +# I2C GPIO expanders: # -# CONFIG_USBPCWATCHDOG is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set # -# Sonics Silicon Backplane +# PCI GPIO expanders: # + +# +# SPI GPIO expanders: +# +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +CONFIG_MFD_WM8350=y +CONFIG_MFD_WM8350_CONFIG_MODE_0=y +CONFIG_MFD_WM8352_CONFIG_MODE_0=y +CONFIG_MFD_WM8350_I2C=y +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -673,7 +721,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEO_ALLOW_V4L1=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set CONFIG_VIDEO_V4L1_COMPAT=y # CONFIG_DVB_CORE is not set CONFIG_VIDEO_MEDIA=y @@ -682,34 +730,38 @@ CONFIG_VIDEO_MEDIA=y # Multimedia drivers # # CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_V4L1=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_DMA_CONTIG=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_USB_VICAM is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -# CONFIG_USB_STKWEBCAM is not set -# CONFIG_SOC_CAMERA is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_USB_DSBR is not set -# CONFIG_USB_SI470X is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +CONFIG_SOC_CAMERA=y +CONFIG_SOC_CAMERA_MT9M001=y +CONFIG_SOC_CAMERA_MT9M111=y +CONFIG_SOC_CAMERA_MT9T031=y +CONFIG_SOC_CAMERA_MT9V022=y +CONFIG_SOC_CAMERA_TW9910=y +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_SOC_CAMERA_OV772X is not set +CONFIG_VIDEO_MX3=y +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set # # Graphics support @@ -719,9 +771,10 @@ CONFIG_DAB=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -739,131 +792,79 @@ CONFIG_FB=y # # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_FB_MX3=y +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# +# CONFIG_LOGO is not set # CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# Miscellaneous USB options +# MMC/SD/SDIO Card Drivers # -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# USB Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # -# CONFIG_USB_C67X00_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +CONFIG_DMADEVICES=y # -# USB port drivers +# DMA Devices # -# CONFIG_USB_SERIAL is not set +CONFIG_MX3_IPU=y +CONFIG_MX3_IPU_IRQS=4 +CONFIG_DMA_ENGINE=y # -# USB Miscellaneous drivers +# DMA Clients # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_WM8350=y # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -873,6 +874,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -890,15 +896,13 @@ CONFIG_INOTIFY_USER=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -917,25 +921,30 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set @@ -954,65 +963,70 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # -CONFIG_PRINTK_TIME=y -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1027,7 +1041,7 @@ CONFIG_CRYPTO=y # # Block modes # -# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set @@ -1046,8 +1060,12 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1064,7 +1082,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set +CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set @@ -1077,24 +1095,31 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -CONFIG_CRC_CCITT=m +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 020e6a8a9e5..5b98f764511 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Fri Aug 22 12:38:51 2008 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 14:07:25 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -44,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -55,48 +62,45 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set CONFIG_KRETPROBES=y -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -104,11 +108,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -124,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -134,10 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -158,14 +159,17 @@ CONFIG_CLASSIC_RCU=y CONFIG_ARCH_ORION5X=y # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Orion Implementations @@ -175,6 +179,7 @@ CONFIG_MACH_RD88F5182=y CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y CONFIG_MACH_TS209=y +CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_MINI=y CONFIG_MACH_TS409=y @@ -187,14 +192,6 @@ CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y CONFIG_MACH_RD88F5181L_FXO=y CONFIG_MACH_RD88F6183AP_GE=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_ORION=y # @@ -228,6 +225,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -237,25 +236,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y @@ -270,6 +276,11 @@ CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -285,13 +296,18 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -328,7 +344,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -343,6 +359,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +CONFIG_NET_DSA=y +CONFIG_NET_DSA_TAG_DSA=y +CONFIG_NET_DSA_TAG_EDSA=y +# CONFIG_NET_DSA_TAG_TRAILER is not set +CONFIG_NET_DSA_MV88E6XXX=y +# CONFIG_NET_DSA_MV88E6060 is not set +CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y +CONFIG_NET_DSA_MV88E6131=y +CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -352,27 +377,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -397,6 +424,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -450,9 +478,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -477,6 +503,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -487,6 +514,11 @@ CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -507,11 +539,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -569,7 +610,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -589,6 +634,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -663,6 +709,7 @@ CONFIG_SATA_MV=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -670,7 +717,26 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -680,19 +746,25 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -702,10 +774,12 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -713,6 +787,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -727,6 +802,8 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -735,7 +812,10 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -819,11 +899,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -886,12 +966,9 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -911,14 +988,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -933,10 +1013,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -956,12 +1041,14 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -970,9 +1057,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -1013,9 +1103,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1030,10 +1147,13 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1042,12 +1162,15 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1055,20 +1178,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1076,7 +1199,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1097,6 +1219,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1104,7 +1227,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1114,8 +1236,18 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1124,7 +1256,10 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1132,7 +1267,12 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1164,6 +1304,7 @@ CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1173,12 +1314,15 @@ CONFIG_RTC_DRV_S35390A=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_M48T86=y +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1196,16 +1340,12 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set - -# -# Voltage and Current regulators -# +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1214,14 +1354,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1231,6 +1382,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1254,15 +1410,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1282,6 +1436,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1290,6 +1445,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1381,13 +1537,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1411,25 +1570,46 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1441,18 +1621,27 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_ASYNC_CORE=y CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1521,18 +1710,24 @@ CONFIG_CRYPTO_PCBC=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1540,7 +1735,7 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig deleted file mode 100644 index 6e37c77c476..00000000000 --- a/arch/arm/configs/pcm037_defconfig +++ /dev/null @@ -1,769 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Wed Jun 25 11:52:42 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -CONFIG_ARCH_MX3=y - -# -# MX3 Options -# -# CONFIG_MACH_MX31ADS is not set -CONFIG_MACH_PCM037=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -# CONFIG_MTD_CFI_NOSWAP is not set -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -CONFIG_SMSC_PHY=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -CONFIG_SMSC911X=y -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# - -# -# I2C GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 65a583ee5df..2d58b8fe59b 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,9 +1,9 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Mon Jul 7 16:59:23 2008 +# Linux kernel version: 2.6.30-rc2 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set @@ -12,6 +12,7 @@ CONFIG_MMU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -41,11 +41,20 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=m CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -54,31 +63,36 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -88,11 +102,11 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,12 +114,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -119,7 +131,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -129,11 +141,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -145,26 +156,38 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set CONFIG_ARCH_S3C2410=y +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set CONFIG_PLAT_S3C24XX=y +CONFIG_S3C2410_CLOCK=y +CONFIG_S3C24XX_DCLK=y CONFIG_CPU_S3C244X=y -# CONFIG_S3C24XX_PWM is not set +CONFIG_S3C24XX_PWM=y +CONFIG_S3C24XX_GPIO_EXTRA=128 +CONFIG_S3C24XX_GPIO_EXTRA64=y +CONFIG_S3C24XX_GPIO_EXTRA128=y CONFIG_PM_SIMTEC=y CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set +CONFIG_S3C24XX_ADC=y CONFIG_MACH_SMDK=y CONFIG_PLAT_S3C=y CONFIG_CPU_LLSERIAL_S3C2410=y @@ -174,7 +197,8 @@ CONFIG_CPU_LLSERIAL_S3C2440=y # Boot options # # CONFIG_S3C_BOOT_WATCHDOG is not set -# CONFIG_S3C_BOOT_ERROR_RESET is not set +CONFIG_S3C_BOOT_ERROR_RESET=y +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y # # Power management @@ -182,6 +206,8 @@ CONFIG_CPU_LLSERIAL_S3C2440=y # CONFIG_S3C2410_PM_DEBUG is not set # CONFIG_S3C2410_PM_CHECK is not set CONFIG_S3C_LOWLEVEL_UART_PORT=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_DEV_HSMMC=y # # S3C2400 Machines @@ -190,7 +216,6 @@ CONFIG_CPU_S3C2410=y CONFIG_CPU_S3C2410_DMA=y CONFIG_S3C2410_PM=y CONFIG_S3C2410_GPIO=y -CONFIG_S3C2410_CLOCK=y CONFIG_SIMTEC_NOR=y CONFIG_MACH_BAST_IDE=y @@ -205,7 +230,7 @@ CONFIG_ARCH_BAST=y CONFIG_MACH_OTOM=y CONFIG_MACH_AML_M5900=y CONFIG_BAST_PC104_IRQ=y -# CONFIG_MACH_TCT_HAMMER is not set +CONFIG_MACH_TCT_HAMMER=y CONFIG_MACH_VR1000=y CONFIG_MACH_QT2410=y CONFIG_CPU_S3C2412=y @@ -215,10 +240,11 @@ CONFIG_S3C2412_PM=y # # S3C2412 Machines # -# CONFIG_MACH_JIVE is not set +CONFIG_MACH_JIVE=y +# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set CONFIG_MACH_SMDK2413=y CONFIG_MACH_S3C2413=y -# CONFIG_MACH_SMDK2412 is not set +CONFIG_MACH_SMDK2412=y CONFIG_MACH_VSTMS=y CONFIG_CPU_S3C2440=y CONFIG_S3C2440_DMA=y @@ -232,7 +258,7 @@ CONFIG_MACH_RX3715=y CONFIG_ARCH_S3C2440=y CONFIG_MACH_NEXCODER_2440=y CONFIG_SMDK2440_CPU2440=y -# CONFIG_MACH_AT2440EVB is not set +CONFIG_MACH_AT2440EVB=y CONFIG_CPU_S3C2442=y # @@ -286,25 +312,31 @@ CONFIG_ISA=y # # Kernel Features # -# CONFIG_TICK_ONESHOT is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT is not set CONFIG_HZ=200 # CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -317,6 +349,11 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -332,6 +369,8 @@ CONFIG_FPE_NWFPE_XP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=y # CONFIG_BINFMT_MISC is not set # CONFIG_ARTHUR is not set @@ -346,10 +385,6 @@ CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=m CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -359,11 +394,13 @@ CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -372,15 +409,16 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y @@ -388,8 +426,25 @@ CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=m @@ -413,12 +468,181 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_VS=m +# CONFIG_IP_VS_IPV6 is not set +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +# CONFIG_IP_VS_PROTO_TCP is not set +# CONFIG_IP_VS_PROTO_UDP is not set +# CONFIG_IP_VS_PROTO_ESP is not set +# CONFIG_IP_VS_PROTO_AH is not set + +# +# IPVS scheduler +# +# CONFIG_IP_VS_RR is not set +# CONFIG_IP_VS_WRR is not set +# CONFIG_IP_VS_LC is not set +# CONFIG_IP_VS_WLC is not set +# CONFIG_IP_VS_LBLC is not set +# CONFIG_IP_VS_LBLCR is not set +# CONFIG_IP_VS_DH is not set +# CONFIG_IP_VS_SH is not set +# CONFIG_IP_VS_SED is not set +# CONFIG_IP_VS_NQ is not set + +# +# IPVS application helper +# + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -428,8 +652,10 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set -CONFIG_NET_SCH_FIFO=y +CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -451,8 +677,8 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y @@ -462,35 +688,26 @@ CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y CONFIG_CFG80211=m -CONFIG_NL80211=y +# CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set CONFIG_MAC80211=m # # Rate control algorithm selection # -CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_NONE is not set - -# -# Selecting 'y' for an algorithm will -# - -# -# build the algorithm into mac80211. -# -CONFIG_MAC80211_RC_DEFAULT="pid" -CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set -# CONFIG_MAC80211_DEBUG is not set -# CONFIG_IEEE80211 is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -504,7 +721,9 @@ CONFIG_MAC80211_LEDS=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -513,6 +732,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y @@ -545,7 +765,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -CONFIG_MTD_MAP_BANK_WIDTH_16=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y @@ -566,8 +786,6 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set -CONFIG_MTD_BAST=y -CONFIG_MTD_BAST_MAXSIZE=4 # CONFIG_MTD_PLATRAM is not set # @@ -590,6 +808,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_S3C2410=y # CONFIG_MTD_NAND_S3C2410_DEBUG is not set @@ -602,6 +821,11 @@ CONFIG_MTD_NAND_S3C2410=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -620,7 +844,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 @@ -628,32 +852,40 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_AT25=m +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_93CX6=m CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_PLATFORM=y # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -699,6 +931,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -711,11 +945,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_HAVE_PATA_PLATFORM=y # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -731,9 +967,14 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set CONFIG_DM9000=y -# CONFIG_ENC28J60 is not set CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -742,11 +983,14 @@ CONFIG_DM9000_DEBUGLEVEL=4 # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_CS89x0 is not set # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # CONFIG_TR is not set @@ -755,7 +999,10 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -778,7 +1025,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -789,7 +1036,7 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # @@ -808,20 +1055,88 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_BCM5974=m # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set -# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_JOYSTICK=y +CONFIG_JOYSTICK_ANALOG=m +CONFIG_JOYSTICK_A3D=m +CONFIG_JOYSTICK_ADI=m +CONFIG_JOYSTICK_COBRA=m +CONFIG_JOYSTICK_GF2K=m +CONFIG_JOYSTICK_GRIP=m +CONFIG_JOYSTICK_GRIP_MP=m +CONFIG_JOYSTICK_GUILLEMOT=m +CONFIG_JOYSTICK_INTERACT=m +CONFIG_JOYSTICK_SIDEWINDER=m +CONFIG_JOYSTICK_TMDC=m +CONFIG_JOYSTICK_IFORCE=m +# CONFIG_JOYSTICK_IFORCE_USB is not set +# CONFIG_JOYSTICK_IFORCE_232 is not set +# CONFIG_JOYSTICK_WARRIOR is not set +CONFIG_JOYSTICK_MAGELLAN=m +CONFIG_JOYSTICK_SPACEORB=m +CONFIG_JOYSTICK_SPACEBALL=m +CONFIG_JOYSTICK_STINGER=m +CONFIG_JOYSTICK_TWIDJOY=m +CONFIG_JOYSTICK_ZHENHUA=m +CONFIG_JOYSTICK_DB9=m +CONFIG_JOYSTICK_GAMECON=m +CONFIG_JOYSTICK_TURBOGRAFX=m +CONFIG_JOYSTICK_JOYDUMP=m +CONFIG_JOYSTICK_XPAD=m +CONFIG_JOYSTICK_XPAD_FF=y +CONFIG_JOYSTICK_XPAD_LEDS=y # CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_HTCPEN is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_USB_EGALAX=y +CONFIG_TOUCHSCREEN_USB_PANJIT=y +CONFIG_TOUCHSCREEN_USB_3M=y +CONFIG_TOUCHSCREEN_USB_ITM=y +CONFIG_TOUCHSCREEN_USB_ETURBO=y +CONFIG_TOUCHSCREEN_USB_GUNZE=y +CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y +CONFIG_TOUCHSCREEN_USB_IDEALTEK=y +CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y +CONFIG_TOUCHSCREEN_USB_GOTOP=y +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_ATI_REMOTE=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_UINPUT=m +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m # # Hardware I/O ports @@ -831,12 +1146,15 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PARKBD is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set +CONFIG_GAMEPORT=m +# CONFIG_GAMEPORT_NS558 is not set +# CONFIG_GAMEPORT_L4 is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -877,14 +1195,17 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # Non-8250 serial port support # CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_S3C2410=y CONFIG_SERIAL_S3C2412=y CONFIG_SERIAL_S3C2440=y +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y @@ -892,7 +1213,7 @@ CONFIG_PRINTER=y CONFIG_PPDEV=y # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -901,33 +1222,44 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # -# CONFIG_I2C_ELEKTOR is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set CONFIG_I2C_S3C2410=y CONFIG_I2C_SIMTEC=y + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_ELEKTOR is not set # CONFIG_I2C_PCA_ISA is not set # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -943,6 +1275,7 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=m # CONFIG_SPI_BUTTERFLY is not set +CONFIG_SPI_GPIO=m # CONFIG_SPI_LM70_LLP is not set CONFIG_SPI_S3C24XX=m CONFIG_SPI_S3C24XX_GPIO=m @@ -950,44 +1283,56 @@ CONFIG_SPI_S3C24XX_GPIO=m # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_SPI_SPIDEV=m +CONFIG_SPI_TLE62X0=m +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# GPIO Support +# Memory mapped GPIO expanders: # -# CONFIG_DEBUG_GPIO is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # +# PCI GPIO expanders: +# + +# # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1003,10 +1348,16 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -1022,7 +1373,10 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1043,20 +1397,33 @@ CONFIG_S3C2410_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y +# CONFIG_MFD_SM501_GPIO is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -1065,14 +1432,189 @@ CONFIG_MFD_SM501=y # # Multimedia core support # -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m # # Multimedia drivers # -# CONFIG_DAB is not set +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_VIVI=m +CONFIG_VIDEO_PMS=m +CONFIG_VIDEO_BWQCAM=m +CONFIG_VIDEO_CQCAM=m +CONFIG_VIDEO_W9966=m +CONFIG_VIDEO_CPIA=m +CONFIG_VIDEO_CPIA_PP=m +CONFIG_VIDEO_CPIA_USB=m +CONFIG_VIDEO_CPIA2=m +CONFIG_VIDEO_SAA5246A=m +CONFIG_VIDEO_SAA5249=m +CONFIG_VIDEO_AU0828=m +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VIDEO_CLASS is not set +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_CX231XX is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_RADIO_ADAPTERS=y +CONFIG_RADIO_CADET=m +CONFIG_RADIO_RTRACK=m +CONFIG_RADIO_RTRACK2=m +CONFIG_RADIO_AZTECH=m +CONFIG_RADIO_GEMTEK=m +CONFIG_RADIO_SF16FMI=m +CONFIG_RADIO_SF16FMR2=m +CONFIG_RADIO_TERRATEC=m +CONFIG_RADIO_TRUST=m +CONFIG_RADIO_TYPHOON=m +CONFIG_RADIO_TYPHOON_PROC_FS=y +CONFIG_RADIO_ZOLTRIX=m +CONFIG_USB_DSBR=m +CONFIG_USB_SI470X=m +CONFIG_USB_MR800=m +CONFIG_RADIO_TEA5764=m +CONFIG_DVB_DYNAMIC_MINORS=y +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +# CONFIG_DVB_USB_A800 is not set +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +# CONFIG_DVB_USB_GL861 is not set +# CONFIG_DVB_USB_AU6610 is not set +# CONFIG_DVB_USB_DIGITV is not set +# CONFIG_DVB_USB_VP7045 is not set +# CONFIG_DVB_USB_VP702X is not set +# CONFIG_DVB_USB_GP8PSK is not set +# CONFIG_DVB_USB_NOVA_T_USB2 is not set +# CONFIG_DVB_USB_TTUSB2 is not set +# CONFIG_DVB_USB_DTT200U is not set +# CONFIG_DVB_USB_OPERA1 is not set +CONFIG_DVB_USB_AF9005=m +# CONFIG_DVB_USB_AF9005_REMOTE is not set +# CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_CINERGY_T2 is not set +# CONFIG_DVB_USB_ANYSEE is not set +# CONFIG_DVB_USB_DTV5100 is not set +# CONFIG_DVB_USB_AF9015 is not set +# CONFIG_DVB_USB_CE6230 is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set +CONFIG_DVB_CX22702=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_S5H1411=m +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_LGS8GL5=m +CONFIG_DAB=y +CONFIG_USB_DABUSB=m # # Graphics support @@ -1082,6 +1624,7 @@ CONFIG_MFD_SM501=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1105,7 +1648,19 @@ CONFIG_FB_S3C2410=y # CONFIG_FB_S3C2410_DEBUG is not set CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_GENERIC=m +CONFIG_BACKLIGHT_PWM=m # # Display device support @@ -1125,11 +1680,54 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set - -# -# Sound -# -# CONFIG_SOUND is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_CAIAQ=m +# CONFIG_SND_USB_CAIAQ_INPUT is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_S3C24XX_SOC=y +CONFIG_SND_S3C24XX_SOC_I2S=m +CONFIG_SND_S3C_I2SV2_SOC=m +CONFIG_SND_S3C2412_SOC_I2S=m +CONFIG_SND_S3C2443_SOC_AC97=m +CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m +CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m +CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m +CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=m +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_AC97_CODEC=m +CONFIG_SND_SOC_L3=m +CONFIG_SND_SOC_UDA134X=m +CONFIG_SND_SOC_WM8750=m +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -1139,12 +1737,12 @@ CONFIG_HID=y # USB Input Devices # # CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # -# USB HID Boot Protocol drivers +# Special HID drivers # -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set +CONFIG_HID_APPLE=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1161,19 +1759,26 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_U132_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1181,53 +1786,51 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m # # USB port drivers # -# CONFIG_USB_USS720 is not set +CONFIG_USB_USS720=m CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set # CONFIG_USB_EZUSB is not set CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=y @@ -1251,42 +1854,71 @@ CONFIG_USB_SERIAL_FTDI_SIO=y CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set CONFIG_USB_SERIAL_OPTION=m # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_BERRY_CHARGE=m CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m CONFIG_USB_LD=m -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m +CONFIG_USB_TEST=m # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=m +CONFIG_MMC_TEST=m + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SPI=m +CONFIG_MMC_S3C=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m @@ -1295,7 +1927,14 @@ CONFIG_LEDS_CLASS=m # CONFIG_LEDS_S3C24XX=m CONFIG_LEDS_H1940=m -# CONFIG_LEDS_GPIO is not set +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_PCA955X=m +CONFIG_LEDS_DAC124S085=m +CONFIG_LEDS_PWM=m +CONFIG_LEDS_BD2802=m # # LED Triggers @@ -1304,7 +1943,13 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m # CONFIG_LEDS_TRIGGER_IDE_DISK is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=m -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_GPIO=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1335,31 +1980,43 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_S3C=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1370,27 +2027,40 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +CONFIG_JBD2=m CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -1416,15 +2086,13 @@ CONFIG_NTFS_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1444,27 +2112,49 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1546,6 +2236,11 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1565,14 +2260,39 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1586,19 +2306,29 @@ CONFIG_DEBUG_S3C_UART=0 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -1630,10 +2360,14 @@ CONFIG_CRYPTO_HMAC=m # # Digest # -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1663,23 +2397,37 @@ CONFIG_CRYPTO_DES=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 30f463d2fa8..6ab5dd5868d 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_PXA=y # # Floating point emulation diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index d7da19bcf92..c207504de84 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t; #define EF_ARM_HASENTRY 0x00000002 /* All */ #define EF_ARM_RELEXEC 0x00000001 /* All */ -#define R_ARM_NONE 0 -#define R_ARM_PC24 1 -#define R_ARM_ABS32 2 -#define R_ARM_CALL 28 -#define R_ARM_JUMP24 29 -#define R_ARM_V4BX 40 -#define R_ARM_PREL31 42 +#define R_ARM_NONE 0 +#define R_ARM_PC24 1 +#define R_ARM_ABS32 2 +#define R_ARM_CALL 28 +#define R_ARM_JUMP24 29 +#define R_ARM_V4BX 40 +#define R_ARM_PREL31 42 +#define R_ARM_MOVW_ABS_NC 43 +#define R_ARM_MOVT_ABS 44 /* * These are used to set parameters in the core dumps. diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h index c10d1aa4b48..ada93a8fc2e 100644 --- a/arch/arm/include/asm/sizes.h +++ b/arch/arm/include/asm/sizes.h @@ -32,6 +32,7 @@ #define SZ_4K 0x00001000 #define SZ_8K 0x00002000 #define SZ_16K 0x00004000 +#define SZ_32K 0x00008000 #define SZ_64K 0x00010000 #define SZ_128K 0x00020000 #define SZ_256K 0x00040000 diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 857f1dfac79..321c83e43a1 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -36,6 +36,8 @@ struct mmu_gather { struct mm_struct *mm; unsigned int fullmm; + unsigned long range_start; + unsigned long range_end; }; DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); @@ -63,7 +65,19 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) put_cpu_var(mmu_gathers); } -#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0) +/* + * Memorize the range for the TLB flush. + */ +static inline void +tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr) +{ + if (!tlb->fullmm) { + if (addr < tlb->range_start) + tlb->range_start = addr; + if (addr + PAGE_SIZE > tlb->range_end) + tlb->range_end = addr + PAGE_SIZE; + } +} /* * In the case of tlb vma handling, we can optimise these away in the @@ -73,15 +87,18 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) static inline void tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { - if (!tlb->fullmm) + if (!tlb->fullmm) { flush_cache_range(vma, vma->vm_start, vma->vm_end); + tlb->range_start = TASK_SIZE; + tlb->range_end = 0; + } } static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { - if (!tlb->fullmm) - flush_tlb_range(vma, vma->vm_start, vma->vm_end); + if (!tlb->fullmm && tlb->range_end > 0) + flush_tlb_range(vma, tlb->range_start, tlb->range_end); } #define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 010618487cf..94cc58ef61a 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -387,6 +387,8 @@ #define __NR_dup3 (__NR_SYSCALL_BASE+358) #define __NR_pipe2 (__NR_SYSCALL_BASE+359) #define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) +#define __NR_preadv (__NR_SYSCALL_BASE+361) +#define __NR_pwritev (__NR_SYSCALL_BASE+362) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 9ca8d13f05f..1680e9e9c83 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -370,6 +370,8 @@ CALL(sys_dup3) CALL(sys_pipe2) /* 360 */ CALL(sys_inotify_init1) + CALL(sys_preadv) + CALL(sys_pwritev) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index d1731e39b49..bac03c81489 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, *(u32 *)loc = offset & 0x7fffffff; break; + case R_ARM_MOVW_ABS_NC: + case R_ARM_MOVT_ABS: + offset = *(u32 *)loc; + offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff); + offset = (offset ^ 0x8000) - 0x8000; + + offset += sym->st_value; + if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS) + offset >>= 16; + + *(u32 *)loc &= 0xfff0f000; + *(u32 *)loc |= ((offset & 0xf000) << 4) | + (offset & 0x0fff); + break; + default: printk(KERN_ERR "%s: unknown relocation: %u\n", module->name, ELF32_R_TYPE(rel->r_info)); diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index 42623db7f87..d59a0cd537f 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -83,6 +83,7 @@ #include <linux/net.h> #include <linux/ipc.h> #include <linux/uaccess.h> +#include <linux/slab.h> struct oldabi_stat64 { unsigned long long st_dev; @@ -176,21 +177,12 @@ asmlinkage long sys_oabi_fstatat64(int dfd, int flag) { struct kstat stat; - int error = -EINVAL; + int error; - if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0) - goto out; - - if (flag & AT_SYMLINK_NOFOLLOW) - error = vfs_lstat_fd(dfd, filename, &stat); - else - error = vfs_stat_fd(dfd, filename, &stat); - - if (!error) - error = cp_oldabi_stat64(&stat, statbuf); - -out: - return error; + error = vfs_fstatat(dfd, filename, &stat, flag); + if (error) + return error; + return cp_oldabi_stat64(&stat, statbuf); } struct oabi_flock64 { diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 1ff1bda0a89..309f3511aa2 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -85,7 +85,7 @@ static struct irqaction at91rm9200_timer_irq = { .handler = at91rm9200_timer_interrupt }; -static cycle_t read_clk32k(void) +static cycle_t read_clk32k(struct clocksource *cs) { return read_CRTR(); } diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index b63e1d5f1ba..4bd56aee437 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -31,7 +31,7 @@ static u32 pit_cnt; /* access only w/system irq blocked */ * Clocksource: just a monotonic counter of MCK/16 cycles. * We don't care whether or not PIT irqs are enabled. */ -static cycle_t read_pit_clk(void) +static cycle_t read_pit_clk(struct clocksource *cs) { unsigned long flags; u32 elapsed; diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 793fe7b25f3..e6afff849b8 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -87,7 +87,7 @@ extern void __init at91_add_device_eth(struct at91_eth_data *data); /* USB Host */ struct at91_usbh_data { u8 ports; /* number of ports on root hub */ - u8 vbus_pin[]; /* port power-control pin */ + u8 vbus_pin[2]; /* port power-control pin */ }; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index bac988e7a4c..a9c78bc72b8 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,19 +4,56 @@ menu "TI DaVinci Implementations" comment "DaVinci Core Type" -config ARCH_DAVINCI644x - default y +config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" comment "DaVinci Board Type" config MACH_DAVINCI_EVM - bool "TI DaVinci EVM" + bool "TI DM644x EVM" default y - depends on ARCH_DAVINCI644x + depends on ARCH_DAVINCI_DM644x help Configure this option to specify the whether the board used - for development is a DaVinci EVM + for development is a DM644x EVM + + +config DAVINCI_MUX + bool "DAVINCI multiplexing support" + depends on ARCH_DAVINCI + default y + help + Pin multiplexing support for DAVINCI boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. + +config DAVINCI_MUX_DEBUG + bool "Multiplexing debug output" + depends on DAVINCI_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. + +config DAVINCI_MUX_WARNINGS + bool "Warn about pins the bootloader didn't set up" + depends on DAVINCI_MUX + help + Choose Y here to warn whenever driver initialization logic needs + to change the pin multiplexing setup. When there are no warnings + printed, it's safe to deselect DAVINCI_MUX for your product. + +config DAVINCI_RESET_CLOCKS + bool "Reset unused clocks during boot" + depends on ARCH_DAVINCI + help + Say Y if you want to reset unused clocks during boot. + This option saves power, but assumes all drivers are + using the clock framework. Broken drivers that do not + yet use clock framework may not work with this option. + If you are booting from another operating system, you + probably do not want this option enabled until your + device drivers work properly. endmenu diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 4dc458597f4..1674661942f 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,12 @@ # Common objects obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ - gpio.o mux.o devices.o usb.o + gpio.o devices.o dma.o usb.o + +obj-$(CONFIG_DAVINCI_MUX) += mux.o + +# Chip specific +obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o # Board specific -obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o +obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 0b97a528902..b2e7f9c63bc 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -15,15 +15,20 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/memory.h> +#include <linux/etherdevice.h> #include <linux/i2c.h> #include <linux/i2c/pcf857x.h> #include <linux/i2c/at24.h> #include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/io.h> +#include <linux/phy.h> +#include <linux/clk.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -32,25 +37,34 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/hardware.h> +#include <mach/dm644x.h> #include <mach/common.h> #include <mach/i2c.h> +#include <mach/serial.h> +#include <mach/mux.h> +#include <mach/psc.h> +#include <mach/nand.h> -/* other misc. init functions */ -void __init davinci_psc_init(void); -void __init davinci_irq_init(void); -void __init davinci_map_common_io(void); -void __init davinci_init_common_hw(void); +#define DM644X_EVM_PHY_MASK (0x2) +#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) +#define DAVINCI_CFC_ATA_BASE 0x01C66000 + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000 + +#define LXT971_PHY_ID (0x001378e2) +#define LXT971_PHY_MASK (0xfffffff0) static struct mtd_partition davinci_evm_norflash_partitions[] = { - /* bootloader (U-Boot, etc) in first 4 sectors */ + /* bootloader (UBL, U-Boot, etc) in first 5 sectors */ { .name = "bootloader", .offset = 0, - .size = 4 * SZ_64K, + .size = 5 * SZ_64K, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* bootloader params in the next 1 sectors */ @@ -100,10 +114,89 @@ static struct platform_device davinci_evm_norflash_device = { .resource = &davinci_evm_norflash_resource, }; -#endif +/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks). + * It may used instead of the (default) NOR chip to boot, using TI's + * tools to install the secondary boot loader (UBL) and U-Boot. + */ +struct mtd_partition davinci_evm_nandflash_partition[] = { + /* Bootloader layout depends on whose u-boot is installed, but we + * can hide all the details. + * - block 0 for u-boot environment ... in mainline u-boot + * - block 1 for UBL (plus up to four backup copies in blocks 2..5) + * - blocks 6...? for u-boot + * - blocks 16..23 for u-boot environment ... in TI's u-boot + */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_256K + SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* Kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, + /* File system (older GIT kernels started this on the 5MB mark) */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* A few blocks at end hold a flash BBT ... created by TI's CCS + * using flashwriter_nand.out, but ignored by TI's versions of + * Linux and u-boot. We boot faster by using them. + */ +}; -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +static struct davinci_nand_pdata davinci_evm_nandflash_data = { + .parts = davinci_evm_nandflash_partition, + .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), + .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_evm_nandflash_resource[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_evm_nandflash_device = { + .name = "davinci_nand", + .id = 0, + .dev = { + .platform_data = &davinci_evm_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource), + .resource = davinci_evm_nandflash_resource, +}; + +static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device davinci_fb_device = { + .name = "davincifb", + .id = -1, + .dev = { + .dma_mask = &davinci_fb_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = 0, +}; + +static struct platform_device rtc_dev = { + .name = "rtc_davinci_evm", + .id = -1, +}; static struct resource ide_resources[] = { { @@ -131,8 +224,6 @@ static struct platform_device ide_dev = { }, }; -#endif - /*----------------------------------------------------------------------*/ /* @@ -311,7 +402,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) gpio_request(gpio + 7, "nCF_SEL"); gpio_direction_output(gpio + 7, 1); - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ + /* irlml6401 switches over 1A, in under 8 msec; + * now it can be managed by nDRV_VBUS ... + */ setup_usb(500, 8); return 0; @@ -343,14 +436,120 @@ static struct pcf857x_platform_data pcf_data_u35 = { * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) * - ... newer boards may have more */ +static struct memory_accessor *at24_mem_acc; + +static void at24_setup(struct memory_accessor *mem_acc, void *context) +{ + DECLARE_MAC_BUF(mac_str); + char mac_addr[6]; + + at24_mem_acc = mem_acc; + + /* Read MAC addr from EEPROM */ + if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) { + printk(KERN_INFO "Read MAC addr from EEPROM: %s\n", + print_mac(mac_str, mac_addr)); + } +} + static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, .flags = AT24_FLAG_ADDR16, + .setup = at24_setup, }; +int dm6446evm_eeprom_read(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->read(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm6446evm_eeprom_read); + +int dm6446evm_eeprom_write(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->write(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm6446evm_eeprom_write); + +/* + * MSP430 supports RTC, card detection, input from IR remote, and + * a bit more. It triggers interrupts on GPIO(7) from pressing + * buttons on the IR remote, and for card detect switches. + */ +static struct i2c_client *dm6446evm_msp; + +static int dm6446evm_msp_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + dm6446evm_msp = client; + return 0; +} + +static int dm6446evm_msp_remove(struct i2c_client *client) +{ + dm6446evm_msp = NULL; + return 0; +} + +static const struct i2c_device_id dm6446evm_msp_ids[] = { + { "dm6446evm_msp", 0, }, + { /* end of list */ }, +}; + +static struct i2c_driver dm6446evm_msp_driver = { + .driver.name = "dm6446evm_msp", + .id_table = dm6446evm_msp_ids, + .probe = dm6446evm_msp_probe, + .remove = dm6446evm_msp_remove, +}; + +static int dm6444evm_msp430_get_pins(void) +{ + static const char txbuf[2] = { 2, 4, }; + char buf[4]; + struct i2c_msg msg[2] = { + { + .addr = dm6446evm_msp->addr, + .flags = 0, + .len = 2, + .buf = (void __force *)txbuf, + }, + { + .addr = dm6446evm_msp->addr, + .flags = I2C_M_RD, + .len = 4, + .buf = buf, + }, + }; + int status; + + if (!dm6446evm_msp) + return -ENXIO; + + /* Command 4 == get input state, returns port 2 and port3 data + * S Addr W [A] len=2 [A] cmd=4 [A] + * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P + */ + status = i2c_transfer(dm6446evm_msp->adapter, msg, 2); + if (status < 0) + return status; + + dev_dbg(&dm6446evm_msp->dev, + "PINS: %02x %02x %02x %02x\n", + buf[0], buf[1], buf[2], buf[3]); + + return (buf[3] << 8) | buf[2]; +} + static struct i2c_board_info __initdata i2c_info[] = { { + I2C_BOARD_INFO("dm6446evm_msp", 0x23), + }, + { I2C_BOARD_INFO("pcf8574", 0x38), .platform_data = &pcf_data_u2, }, @@ -368,7 +567,6 @@ static struct i2c_board_info __initdata i2c_info[] = { }, /* ALSO: * - tvl320aic33 audio codec (0x1b) - * - msp430 microcontroller (0x23) * - tvp5146 video decoder (0x5d) */ }; @@ -384,51 +582,109 @@ static struct davinci_i2c_platform_data i2c_pdata = { static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); + i2c_add_driver(&dm6446evm_msp_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } static struct platform_device *davinci_evm_devices[] __initdata = { -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - &davinci_evm_norflash_device, -#endif -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - &ide_dev, -#endif + &davinci_fb_device, + &rtc_dev, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), }; static void __init davinci_evm_map_io(void) { davinci_map_common_io(); + dm644x_init(); } -static __init void davinci_evm_init(void) +static int davinci_phy_fixup(struct phy_device *phydev) { - davinci_psc_init(); + unsigned int control; + /* CRITICAL: Fix for increasing PHY signal drive strength for + * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY + * signal strength was low causing TX to fail randomly. The + * fix is to Set bit 11 (Increased MII drive strength) of PHY + * register 26 (Digital Config register) on this phy. */ + control = phy_read(phydev, 26); + phy_write(phydev, 26, (control | 0x800)); + return 0; +} #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#define HAS_ATA 1 +#else +#define HAS_ATA 0 +#endif + #if defined(CONFIG_MTD_PHYSMAP) || \ defined(CONFIG_MTD_PHYSMAP_MODULE) - printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, " - "but share pins.\n\t Disable IDE for NOR support.\n"); +#define HAS_NOR 1 +#else +#define HAS_NOR 0 #endif + +#if defined(CONFIG_MTD_NAND_DAVINCI) || \ + defined(CONFIG_MTD_NAND_DAVINCI_MODULE) +#define HAS_NAND 1 +#else +#define HAS_NAND 0 #endif +static __init void davinci_evm_init(void) +{ + struct clk *aemif_clk; + + aemif_clk = clk_get(NULL, "aemif"); + clk_enable(aemif_clk); + + if (HAS_ATA) { + if (HAS_NAND || HAS_NOR) + pr_warning("WARNING: both IDE and Flash are " + "enabled, but they share AEMIF pins.\n" + "\tDisable IDE for NAND/NOR support.\n"); + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN); + davinci_cfg_reg(DM644X_HDIREN); + platform_device_register(&ide_dev); + } else if (HAS_NAND || HAS_NOR) { + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN_DISABLE); + + /* only one device will be jumpered and detected */ + if (HAS_NAND) { + platform_device_register(&davinci_evm_nandflash_device); + evm_leds[7].default_trigger = "nand-disk"; + if (HAS_NOR) + pr_warning("WARNING: both NAND and NOR flash " + "are enabled; disable one of them.\n"); + } else if (HAS_NOR) + platform_device_register(&davinci_evm_norflash_device); + } + platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); + + davinci_serial_init(&uart_config); + + /* Register the fixup for PHY on DaVinci */ + phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, + davinci_phy_fixup); + } static __init void davinci_evm_irq_init(void) { - davinci_init_common_hw(); davinci_irq_init(); } -MACHINE_START(DAVINCI_EVM, "DaVinci EVM") +MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") /* Maintainer: MontaVista Software <source@mvista.com> */ .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index abb92b7eca0..f0baaa15a57 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -1,7 +1,8 @@ /* - * TI DaVinci clock config file + * Clock and PLL control for DaVinci devices * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/errno.h> +#include <linux/clk.h> #include <linux/err.h> #include <linux/mutex.h> #include <linux/platform_device.h> @@ -21,98 +23,50 @@ #include <mach/hardware.h> #include <mach/psc.h> +#include <mach/cputype.h> #include "clock.h" -/* PLL/Reset register offsets */ -#define PLLM 0x110 - static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clockfw_lock); -static unsigned int commonrate; -static unsigned int armrate; -static unsigned int fixedrate = 27000000; /* 27 MHZ */ - -extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable); - -/* - * Returns a clock. Note that we first try to use device id on the bus - * and clock name. If this fails, we try to use clock name only. - */ -struct clk *clk_get(struct device *dev, const char *id) +static unsigned psc_domain(struct clk *clk) { - struct clk *p, *clk = ERR_PTR(-ENOENT); - int idno; - - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; - else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, node) { - if (p->id == idno && - strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - goto found; - } - } - - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - break; - } - } - -found: - mutex_unlock(&clocks_mutex); - - return clk; + return (clk->flags & PSC_DSP) + ? DAVINCI_GPSC_DSPDOMAIN + : DAVINCI_GPSC_ARMDOMAIN; } -EXPORT_SYMBOL(clk_get); -void clk_put(struct clk *clk) +static void __clk_enable(struct clk *clk) { - if (clk && !IS_ERR(clk)) - module_put(clk->owner); -} -EXPORT_SYMBOL(clk_put); - -static int __clk_enable(struct clk *clk) -{ - if (clk->flags & ALWAYS_ENABLED) - return 0; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1); - return 0; + if (clk->parent) + __clk_enable(clk->parent); + if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) + davinci_psc_config(psc_domain(clk), clk->lpsc, 1); } static void __clk_disable(struct clk *clk) { - if (clk->usecount) + if (WARN_ON(clk->usecount == 0)) return; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0); + if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) + davinci_psc_config(psc_domain(clk), clk->lpsc, 0); + if (clk->parent) + __clk_disable(clk->parent); } int clk_enable(struct clk *clk) { unsigned long flags; - int ret = 0; if (clk == NULL || IS_ERR(clk)) return -EINVAL; - if (clk->usecount++ == 0) { - spin_lock_irqsave(&clockfw_lock, flags); - ret = __clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); - return ret; + return 0; } EXPORT_SYMBOL(clk_enable); @@ -123,11 +77,9 @@ void clk_disable(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return; - if (clk->usecount > 0 && !(--clk->usecount)) { - spin_lock_irqsave(&clockfw_lock, flags); - __clk_disable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); @@ -136,7 +88,7 @@ unsigned long clk_get_rate(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_get_rate); @@ -145,7 +97,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_round_rate); @@ -164,10 +116,23 @@ int clk_register(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; + if (WARN(clk->parent && !clk->parent->rate, + "CLK: %s parent %s has no rate!\n", + clk->name, clk->parent->name)) + return -EINVAL; + mutex_lock(&clocks_mutex); - list_add(&clk->node, &clocks); + list_add_tail(&clk->node, &clocks); mutex_unlock(&clocks_mutex); + /* If rate is already set, use it */ + if (clk->rate) + return 0; + + /* Otherwise, default to parent rate */ + if (clk->parent) + clk->rate = clk->parent->rate; + return 0; } EXPORT_SYMBOL(clk_register); @@ -183,84 +148,150 @@ void clk_unregister(struct clk *clk) } EXPORT_SYMBOL(clk_unregister); -static struct clk davinci_clks[] = { - { - .name = "ARMCLK", - .rate = &armrate, - .lpsc = -1, - .flags = ALWAYS_ENABLED, - }, - { - .name = "UART", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_UART0, - }, - { - .name = "EMACCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, - }, - { - .name = "I2CCLK", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_I2C, - }, - { - .name = "IDECLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_ATA, - }, - { - .name = "McBSPCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_McBSP, - }, - { - .name = "MMCSDCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_MMC_SD, - }, - { - .name = "SPICLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_SPI, - }, - { - .name = "gpio", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_GPIO, - }, - { - .name = "usb", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_USB, - }, - { - .name = "AEMIFCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_AEMIF, - .usecount = 1, +#ifdef CONFIG_DAVINCI_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + + spin_lock_irq(&clockfw_lock); + list_for_each_entry(ck, &clocks, node) { + if (ck->usecount > 0) + continue; + if (!(ck->flags & CLK_PSC)) + continue; + + /* ignore if in Disabled or SwRstDisable states */ + if (!davinci_psc_is_clk_active(ck->lpsc)) + continue; + + pr_info("Clocks: disable unused %s\n", ck->name); + davinci_psc_config(psc_domain(ck), ck->lpsc, 0); } -}; + spin_unlock_irq(&clockfw_lock); + + return 0; +} +late_initcall(clk_disable_unused); +#endif -int __init davinci_clk_init(void) +static void clk_sysclk_recalc(struct clk *clk) { - struct clk *clkp; - int count = 0; - u32 pll_mult; - - pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM); - commonrate = ((pll_mult + 1) * 27000000) / 6; - armrate = ((pll_mult + 1) * 27000000) / 2; - - for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks); - count++, clkp++) { - clk_register(clkp); - - /* Turn on clocks that have been enabled in the - * table above */ - if (clkp->usecount) - clk_enable(clkp); + u32 v, plldiv; + struct pll_data *pll; + + /* If this is the PLL base clock, no more calculations needed */ + if (clk->pll_data) + return; + + if (WARN_ON(!clk->parent)) + return; + + clk->rate = clk->parent->rate; + + /* Otherwise, the parent must be a PLL */ + if (WARN_ON(!clk->parent->pll_data)) + return; + + pll = clk->parent->pll_data; + + /* If pre-PLL, source clock is before the multiplier and divider(s) */ + if (clk->flags & PRE_PLL) + clk->rate = pll->input_rate; + + if (!clk->div_reg) + return; + + v = __raw_readl(pll->base + clk->div_reg); + if (v & PLLDIV_EN) { + plldiv = (v & PLLDIV_RATIO_MASK) + 1; + if (plldiv) + clk->rate /= plldiv; + } +} + +static void __init clk_pll_init(struct clk *clk) +{ + u32 ctrl, mult = 1, prediv = 1, postdiv = 1; + u8 bypass; + struct pll_data *pll = clk->pll_data; + + pll->base = IO_ADDRESS(pll->phys_base); + ctrl = __raw_readl(pll->base + PLLCTL); + clk->rate = pll->input_rate = clk->parent->rate; + + if (ctrl & PLLCTL_PLLEN) { + bypass = 0; + mult = __raw_readl(pll->base + PLLM); + mult = (mult & PLLM_PLLM_MASK) + 1; + } else + bypass = 1; + + if (pll->flags & PLL_HAS_PREDIV) { + prediv = __raw_readl(pll->base + PREDIV); + if (prediv & PLLDIV_EN) + prediv = (prediv & PLLDIV_RATIO_MASK) + 1; + else + prediv = 1; + } + + /* pre-divider is fixed, but (some?) chips won't report that */ + if (cpu_is_davinci_dm355() && pll->num == 1) + prediv = 8; + + if (pll->flags & PLL_HAS_POSTDIV) { + postdiv = __raw_readl(pll->base + POSTDIV); + if (postdiv & PLLDIV_EN) + postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1; + else + postdiv = 1; + } + + if (!bypass) { + clk->rate /= prediv; + clk->rate *= mult; + clk->rate /= postdiv; + } + + pr_debug("PLL%d: input = %lu MHz [ ", + pll->num, clk->parent->rate / 1000000); + if (bypass) + pr_debug("bypass "); + if (prediv > 1) + pr_debug("/ %d ", prediv); + if (mult > 1) + pr_debug("* %d ", mult); + if (postdiv > 1) + pr_debug("/ %d ", postdiv); + pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000); +} + +int __init davinci_clk_init(struct davinci_clk *clocks) + { + struct davinci_clk *c; + struct clk *clk; + + for (c = clocks; c->lk.clk; c++) { + clk = c->lk.clk; + + if (clk->pll_data) + clk_pll_init(clk); + + /* Calculate rates for PLL-derived clocks */ + else if (clk->flags & CLK_PLL) + clk_sysclk_recalc(clk); + + if (clk->lpsc) + clk->flags |= CLK_PSC; + + clkdev_add(&c->lk); + clk_register(clk); + + /* Turn on clocks that Linux doesn't otherwise manage */ + if (clk->flags & ALWAYS_ENABLED) + clk_enable(clk); } return 0; @@ -285,12 +316,52 @@ static void davinci_ck_stop(struct seq_file *m, void *v) { } -static int davinci_ck_show(struct seq_file *m, void *v) +#define CLKNAME_MAX 10 /* longest clock name */ +#define NEST_DELTA 2 +#define NEST_MAX 4 + +static void +dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) { - struct clk *cp; + char *state; + char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX]; + struct clk *clk; + unsigned i; + + if (parent->flags & CLK_PLL) + state = "pll"; + else if (parent->flags & CLK_PSC) + state = "psc"; + else + state = ""; + + /* <nest spaces> name <pad to end> */ + memset(buf, ' ', sizeof(buf) - 1); + buf[sizeof(buf) - 1] = 0; + i = strlen(parent->name); + memcpy(buf + nest, parent->name, + min(i, (unsigned)(sizeof(buf) - 1 - nest))); + + seq_printf(s, "%s users=%2d %-3s %9ld Hz\n", + buf, parent->usecount, state, clk_get_rate(parent)); + /* REVISIT show device associations too */ + + /* cost is now small, but not linear... */ + list_for_each_entry(clk, &clocks, node) { + if (clk->parent == parent) + dump_clock(s, nest + NEST_DELTA, clk); + } +} - list_for_each_entry(cp, &clocks, node) - seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount); +static int davinci_ck_show(struct seq_file *m, void *v) +{ + /* Show clock tree; we know the main oscillator is first. + * We trust nonzero usecounts equate to PSC enables... + */ + mutex_lock(&clocks_mutex); + if (!list_empty(&clocks)) + dump_clock(m, 0, list_first_entry(&clocks, struct clk, node)); + mutex_unlock(&clocks_mutex); return 0; } @@ -321,4 +392,4 @@ static int __init davinci_ck_proc_init(void) } __initcall(davinci_ck_proc_init); -#endif /* CONFIG_DEBUG_PROC_FS */ +#endif /* CONFIG_DEBUG_PROC_FS */ diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index ed47079a52e..35736ec202f 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -1,7 +1,8 @@ /* * TI DaVinci clock definitions * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,23 +12,85 @@ #ifndef __ARCH_ARM_DAVINCI_CLOCK_H #define __ARCH_ARM_DAVINCI_CLOCK_H +#include <linux/list.h> +#include <asm/clkdev.h> + +#define DAVINCI_PLL1_BASE 0x01c40800 +#define DAVINCI_PLL2_BASE 0x01c40c00 +#define MAX_PLL 2 + +/* PLL/Reset register offsets */ +#define PLLCTL 0x100 +#define PLLCTL_PLLEN BIT(0) +#define PLLCTL_CLKMODE BIT(8) + +#define PLLM 0x110 +#define PLLM_PLLM_MASK 0xff + +#define PREDIV 0x114 +#define PLLDIV1 0x118 +#define PLLDIV2 0x11c +#define PLLDIV3 0x120 +#define POSTDIV 0x128 +#define BPDIV 0x12c +#define PLLCMD 0x138 +#define PLLSTAT 0x13c +#define PLLALNCTL 0x140 +#define PLLDCHANGE 0x144 +#define PLLCKEN 0x148 +#define PLLCKSTAT 0x14c +#define PLLSYSTAT 0x150 +#define PLLDIV4 0x160 +#define PLLDIV5 0x164 +#define PLLDIV6 0x168 +#define PLLDIV7 0x16c +#define PLLDIV8 0x170 +#define PLLDIV9 0x174 +#define PLLDIV_EN BIT(15) +#define PLLDIV_RATIO_MASK 0x1f + +struct pll_data { + u32 phys_base; + void __iomem *base; + u32 num; + u32 flags; + u32 input_rate; +}; +#define PLL_HAS_PREDIV 0x01 +#define PLL_HAS_POSTDIV 0x02 + struct clk { struct list_head node; struct module *owner; const char *name; - unsigned int *rate; - int id; - __s8 usecount; - __u8 flags; - __u8 lpsc; + unsigned long rate; + u8 usecount; + u8 flags; + u8 lpsc; + struct clk *parent; + struct pll_data *pll_data; + u32 div_reg; }; /* Clock flags */ -#define RATE_CKCTL 1 -#define RATE_FIXED 2 -#define RATE_PROPAGATES 4 -#define VIRTUAL_CLOCK 8 -#define ALWAYS_ENABLED 16 -#define ENABLE_REG_32BIT 32 +#define ALWAYS_ENABLED BIT(1) +#define CLK_PSC BIT(2) +#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */ +#define CLK_PLL BIT(4) /* PLL-derived clock */ +#define PRE_PLL BIT(5) /* source is before PLL mult/div */ + +struct davinci_clk { + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck) \ + { \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } +int davinci_clk_init(struct davinci_clk *clocks); #endif diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 808633f9f03..a31370b93dd 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -21,6 +21,10 @@ #include <mach/hardware.h> #include <mach/i2c.h> #include <mach/irqs.h> +#include <mach/cputype.h> +#include <mach/mux.h> + +#define DAVINCI_I2C_BASE 0x01C21000 static struct resource i2c_resources[] = { { @@ -43,6 +47,9 @@ static struct platform_device davinci_i2c_device = { void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) { + if (cpu_is_davinci_dm644x()) + davinci_cfg_reg(DM644X_I2C); + davinci_i2c_device.dev.platform_data = pdata; (void) platform_device_register(&davinci_i2c_device); } diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c new file mode 100644 index 00000000000..d428ef192ea --- /dev/null +++ b/arch/arm/mach-davinci/dm644x.c @@ -0,0 +1,461 @@ +/* + * TI DaVinci DM644x chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/platform_device.h> + +#include <mach/dm644x.h> +#include <mach/clock.h> +#include <mach/cputype.h> +#include <mach/edma.h> +#include <mach/irqs.h> +#include <mach/psc.h> +#include <mach/mux.h> + +#include "clock.h" +#include "mux.h" + +/* + * Device specific clocks + */ +#define DM644X_REF_FREQ 27000000 + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DM644X_REF_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .pll_data = &pll1_data, + .flags = CLK_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk5 = { + .name = "pll1_sysclk5", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk pll2_clk = { + .name = "pll2", + .parent = &ref_clk, + .pll_data = &pll2_data, + .flags = CLK_PLL, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll2_sysclk2 = { + .name = "pll2_sysclk2", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll2_sysclkbp = { + .name = "pll2_sysclkbp", + .parent = &pll2_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk dsp_clk = { + .name = "dsp", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_GEM, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk arm_clk = { + .name = "arm", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk vicp_clk = { + .name = "vicp", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_IMCOP, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk vpss_master_clk = { + .name = "vpss_master", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSMSTR, + .flags = CLK_PSC, +}; + +static struct clk vpss_slave_clk = { + .name = "vpss_slave", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSSLV, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART2, +}; + +static struct clk emac_clk = { + .name = "emac", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, +}; + +static struct clk i2c_clk = { + .name = "i2c", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_I2C, +}; + +static struct clk ide_clk = { + .name = "ide", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_ATA, +}; + +static struct clk asp_clk = { + .name = "asp0", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_McBSP, +}; + +static struct clk mmcsd_clk = { + .name = "mmcsd", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_MMC_SD, +}; + +static struct clk spi_clk = { + .name = "spi", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_SPI, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_GPIO, +}; + +static struct clk usb_clk = { + .name = "usb", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_USB, +}; + +static struct clk vlynq_clk = { + .name = "vlynq", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_VLYNQ, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_AEMIF, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM0, +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM1, +}; + +static struct clk pwm2_clk = { + .name = "pwm2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM2, +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER2, + .usecount = 1, /* REVISIT: why cant' this be disabled? */ +}; + +struct davinci_clk dm644x_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "pll2_sysclk2", &pll2_sysclk2), + CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), + CLK(NULL, "dsp", &dsp_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "vicp", &vicp_clk), + CLK(NULL, "vpss_master", &vpss_master_clk), + CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("davinci_emac.1", NULL, &emac_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK("palm_bk3710", NULL, &ide_clk), + CLK("soc-audio.0", NULL, &asp_clk), + CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK(NULL, "spi", &spi_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "usb", &usb_clk), + CLK(NULL, "vlynq", &vlynq_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "pwm2", &pwm2_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, NULL, NULL), +}; + +#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) + +static struct resource dm644x_emac_resources[] = { + { + .start = DM644X_EMAC_BASE, + .end = DM644X_EMAC_BASE + 0x47ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EMACINT, + .end = IRQ_EMACINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm644x_emac_device = { + .name = "davinci_emac", + .id = 1, + .num_resources = ARRAY_SIZE(dm644x_emac_resources), + .resource = dm644x_emac_resources, +}; + +#endif + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm644x_pins[] = { +MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true) +MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true) +MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) + +MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true) + +MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true) + +MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false) + +MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false) + +MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false) + +MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true) +MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true) + +MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false) + +MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false) + +MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false) + +MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false) +MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false) +MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false) + +MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true) + +MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true) + +MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true) +MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false) +MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false) +MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true) + +MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true) + +MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true) +MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false) +}; + + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm644x_no_event[] = { + 0, 1, 12, 13, 14, + 15, 25, 30, 31, 45, + 46, 47, 55, 56, 57, + 58, 59, 60, 61, 62, + 63, + -1 +}; + +static struct edma_soc_info dm644x_edma_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .noevent = dma_chan_dm644x_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using TC*_ERR */ +}; + +static struct platform_device dm644x_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm644x_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ +void __init dm644x_init(void) +{ + davinci_clk_init(dm644x_clks); + davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins)); +} + +static int __init dm644x_init_devices(void) +{ + if (!cpu_is_davinci_dm644x()) + return 0; + + platform_device_register(&dm644x_edma_device); + return 0; +} +postcore_initcall(dm644x_init_devices); diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c new file mode 100644 index 00000000000..15e9eb158bb --- /dev/null +++ b/arch/arm/mach-davinci/dma.c @@ -0,0 +1,1135 @@ +/* + * EDMA3 support for DaVinci + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/compiler.h> +#include <linux/io.h> + +#include <mach/cputype.h> +#include <mach/memory.h> +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/edma.h> +#include <mach/mux.h> + + +/* Offsets matching "struct edmacc_param" */ +#define PARM_OPT 0x00 +#define PARM_SRC 0x04 +#define PARM_A_B_CNT 0x08 +#define PARM_DST 0x0c +#define PARM_SRC_DST_BIDX 0x10 +#define PARM_LINK_BCNTRLD 0x14 +#define PARM_SRC_DST_CIDX 0x18 +#define PARM_CCNT 0x1c + +#define PARM_SIZE 0x20 + +/* Offsets for EDMA CC global channel registers and their shadows */ +#define SH_ER 0x00 /* 64 bits */ +#define SH_ECR 0x08 /* 64 bits */ +#define SH_ESR 0x10 /* 64 bits */ +#define SH_CER 0x18 /* 64 bits */ +#define SH_EER 0x20 /* 64 bits */ +#define SH_EECR 0x28 /* 64 bits */ +#define SH_EESR 0x30 /* 64 bits */ +#define SH_SER 0x38 /* 64 bits */ +#define SH_SECR 0x40 /* 64 bits */ +#define SH_IER 0x50 /* 64 bits */ +#define SH_IECR 0x58 /* 64 bits */ +#define SH_IESR 0x60 /* 64 bits */ +#define SH_IPR 0x68 /* 64 bits */ +#define SH_ICR 0x70 /* 64 bits */ +#define SH_IEVAL 0x78 +#define SH_QER 0x80 +#define SH_QEER 0x84 +#define SH_QEECR 0x88 +#define SH_QEESR 0x8c +#define SH_QSER 0x90 +#define SH_QSECR 0x94 +#define SH_SIZE 0x200 + +/* Offsets for EDMA CC global registers */ +#define EDMA_REV 0x0000 +#define EDMA_CCCFG 0x0004 +#define EDMA_QCHMAP 0x0200 /* 8 registers */ +#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */ +#define EDMA_QDMAQNUM 0x0260 +#define EDMA_QUETCMAP 0x0280 +#define EDMA_QUEPRI 0x0284 +#define EDMA_EMR 0x0300 /* 64 bits */ +#define EDMA_EMCR 0x0308 /* 64 bits */ +#define EDMA_QEMR 0x0310 +#define EDMA_QEMCR 0x0314 +#define EDMA_CCERR 0x0318 +#define EDMA_CCERRCLR 0x031c +#define EDMA_EEVAL 0x0320 +#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/ +#define EDMA_QRAE 0x0380 /* 4 registers */ +#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */ +#define EDMA_QSTAT 0x0600 /* 2 registers */ +#define EDMA_QWMTHRA 0x0620 +#define EDMA_QWMTHRB 0x0624 +#define EDMA_CCSTAT 0x0640 + +#define EDMA_M 0x1000 /* global channel registers */ +#define EDMA_ECR 0x1008 +#define EDMA_ECRH 0x100C +#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */ +#define EDMA_PARM 0x4000 /* 128 param entries */ + +#define DAVINCI_DMA_3PCC_BASE 0x01C00000 + +#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) + +#define EDMA_MAX_DMACH 64 +#define EDMA_MAX_PARAMENTRY 512 +#define EDMA_MAX_EVQUE 2 /* FIXME too small */ + + +/*****************************************************************************/ + +static void __iomem *edmacc_regs_base; + +static inline unsigned int edma_read(int offset) +{ + return (unsigned int)__raw_readl(edmacc_regs_base + offset); +} + +static inline void edma_write(int offset, int val) +{ + __raw_writel(val, edmacc_regs_base + offset); +} +static inline void edma_modify(int offset, unsigned and, unsigned or) +{ + unsigned val = edma_read(offset); + val &= and; + val |= or; + edma_write(offset, val); +} +static inline void edma_and(int offset, unsigned and) +{ + unsigned val = edma_read(offset); + val &= and; + edma_write(offset, val); +} +static inline void edma_or(int offset, unsigned or) +{ + unsigned val = edma_read(offset); + val |= or; + edma_write(offset, val); +} +static inline unsigned int edma_read_array(int offset, int i) +{ + return edma_read(offset + (i << 2)); +} +static inline void edma_write_array(int offset, int i, unsigned val) +{ + edma_write(offset + (i << 2), val); +} +static inline void edma_modify_array(int offset, int i, + unsigned and, unsigned or) +{ + edma_modify(offset + (i << 2), and, or); +} +static inline void edma_or_array(int offset, int i, unsigned or) +{ + edma_or(offset + (i << 2), or); +} +static inline void edma_or_array2(int offset, int i, int j, unsigned or) +{ + edma_or(offset + ((i*2 + j) << 2), or); +} +static inline void edma_write_array2(int offset, int i, int j, unsigned val) +{ + edma_write(offset + ((i*2 + j) << 2), val); +} +static inline unsigned int edma_shadow0_read(int offset) +{ + return edma_read(EDMA_SHADOW0 + offset); +} +static inline unsigned int edma_shadow0_read_array(int offset, int i) +{ + return edma_read(EDMA_SHADOW0 + offset + (i << 2)); +} +static inline void edma_shadow0_write(int offset, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset, val); +} +static inline void edma_shadow0_write_array(int offset, int i, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset + (i << 2), val); +} +static inline unsigned int edma_parm_read(int offset, int param_no) +{ + return edma_read(EDMA_PARM + offset + (param_no << 5)); +} +static inline void edma_parm_write(int offset, int param_no, unsigned val) +{ + edma_write(EDMA_PARM + offset + (param_no << 5), val); +} +static inline void edma_parm_modify(int offset, int param_no, + unsigned and, unsigned or) +{ + edma_modify(EDMA_PARM + offset + (param_no << 5), and, or); +} +static inline void edma_parm_and(int offset, int param_no, unsigned and) +{ + edma_and(EDMA_PARM + offset + (param_no << 5), and); +} +static inline void edma_parm_or(int offset, int param_no, unsigned or) +{ + edma_or(EDMA_PARM + offset + (param_no << 5), or); +} + +/*****************************************************************************/ + +/* actual number of DMA channels and slots on this silicon */ +static unsigned num_channels; +static unsigned num_slots; + +static struct dma_interrupt_data { + void (*callback)(unsigned channel, unsigned short ch_status, + void *data); + void *data; +} intr_data[EDMA_MAX_DMACH]; + +/* The edma_inuse bit for each PaRAM slot is clear unless the + * channel is in use ... by ARM or DSP, for QDMA, or whatever. + */ +static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY); + +/* The edma_noevent bit for each channel is clear unless + * it doesn't trigger DMA events on this platform. It uses a + * bit of SOC-specific initialization code. + */ +static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH); + +/* dummy param set used to (re)initialize parameter RAM slots */ +static const struct edmacc_param dummy_paramset = { + .link_bcntrld = 0xffff, + .ccnt = 1, +}; + +static const int __initconst +queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = { +/* {event queue no, TC no} */ + {0, 0}, + {1, 1}, + {-1, -1} +}; + +static const int __initconst +queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = { + /* {event queue no, Priority} */ + {0, 3}, + {1, 7}, + {-1, -1} +}; + +/*****************************************************************************/ + +static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no) +{ + int bit = (ch_no & 0x7) * 4; + + /* default to low priority queue */ + if (queue_no == EVENTQ_DEFAULT) + queue_no = EVENTQ_1; + + queue_no &= 7; + edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3), + ~(0x7 << bit), queue_no << bit); +} + +static void __init map_queue_tc(int queue_no, int tc_no) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit)); +} + +static void __init assign_priority_to_queue(int queue_no, int priority) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit)); +} + +static inline void +setup_dma_interrupt(unsigned lch, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data) +{ + if (!callback) { + edma_shadow0_write_array(SH_IECR, lch >> 5, + (1 << (lch & 0x1f))); + } + + intr_data[lch].callback = callback; + intr_data[lch].data = data; + + if (callback) { + edma_shadow0_write_array(SH_ICR, lch >> 5, + (1 << (lch & 0x1f))); + edma_shadow0_write_array(SH_IESR, lch >> 5, + (1 << (lch & 0x1f))); + } +} + +/****************************************************************************** + * + * DMA interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_irq_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_irq_handler\n"); + + if ((edma_shadow0_read_array(SH_IPR, 0) == 0) + && (edma_shadow0_read_array(SH_IPR, 1) == 0)) + return IRQ_NONE; + + while (1) { + int j; + if (edma_shadow0_read_array(SH_IPR, 0)) + j = 0; + else if (edma_shadow0_read_array(SH_IPR, 1)) + j = 1; + else + break; + dev_dbg(data, "IPR%d %08x\n", j, + edma_shadow0_read_array(SH_IPR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_shadow0_write_array(SH_ICR, j, (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, DMA_COMPLETE, + intr_data[k].data); + } + } + } + cnt++; + if (cnt > 10) + break; + } + edma_shadow0_write(SH_IEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * DMA error interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_ccerr_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_ccerr_handler\n"); + + if ((edma_read_array(EDMA_EMR, 0) == 0) && + (edma_read_array(EDMA_EMR, 1) == 0) && + (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0)) + return IRQ_NONE; + + while (1) { + int j = -1; + if (edma_read_array(EDMA_EMR, 0)) + j = 0; + else if (edma_read_array(EDMA_EMR, 1)) + j = 1; + if (j >= 0) { + dev_dbg(data, "EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_read_array(EDMA_EMR, j) & (1 << i)) { + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, 1 << i); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, + (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, + DMA_CC_ERROR, + intr_data + [k].data); + } + } + } + } else if (edma_read(EDMA_QEMR)) { + dev_dbg(data, "QEMR %02x\n", + edma_read(EDMA_QEMR)); + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_QEMR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_QEMCR, 1 << i); + edma_shadow0_write(SH_QSECR, (1 << i)); + + /* NOTE: not reported!! */ + } + } + } else if (edma_read(EDMA_CCERR)) { + dev_dbg(data, "CCERR %08x\n", + edma_read(EDMA_CCERR)); + /* FIXME: CCERR.BIT(16) ignored! much better + * to just write CCERRCLR with CCERR value... + */ + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_CCERR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_CCERRCLR, 1 << i); + + /* NOTE: not reported!! */ + } + } + } + if ((edma_read_array(EDMA_EMR, 0) == 0) + && (edma_read_array(EDMA_EMR, 1) == 0) + && (edma_read(EDMA_QEMR) == 0) + && (edma_read(EDMA_CCERR) == 0)) { + break; + } + cnt++; + if (cnt > 10) + break; + } + edma_write(EDMA_EEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * Transfer controller error interrupt handlers + * + *****************************************************************************/ + +#define tc_errs_handled false /* disabled as long as they're NOPs */ + +static irqreturn_t dma_tc0err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc0err_handler\n"); + return IRQ_HANDLED; +} + +static irqreturn_t dma_tc1err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc1err_handler\n"); + return IRQ_HANDLED; +} + +/*-----------------------------------------------------------------------*/ + +/* Resource alloc/free: dma channels, parameter RAM slots */ + +/** + * edma_alloc_channel - allocate DMA channel and paired parameter RAM + * @channel: specific channel to allocate; negative for "any unmapped channel" + * @callback: optional; to be issued on DMA completion or errors + * @data: passed to callback + * @eventq_no: an EVENTQ_* constant, used to choose which Transfer + * Controller (TC) executes requests using this channel. Use + * EVENTQ_DEFAULT unless you really need a high priority queue. + * + * This allocates a DMA channel and its associated parameter RAM slot. + * The parameter RAM is initialized to hold a dummy transfer. + * + * Normal use is to pass a specific channel number as @channel, to make + * use of hardware events mapped to that channel. When the channel will + * be used only for software triggering or event chaining, channels not + * mapped to hardware events (or mapped to unused events) are preferable. + * + * DMA transfers start from a channel using edma_start(), or by + * chaining. When the transfer described in that channel's parameter RAM + * slot completes, that slot's data may be reloaded through a link. + * + * DMA errors are only reported to the @callback associated with the + * channel driving that transfer, but transfer completion callbacks can + * be sent to another channel under control of the TCC field in + * the option word of the transfer's parameter RAM set. Drivers must not + * use DMA transfer completion callbacks for channels they did not allocate. + * (The same applies to TCC codes used in transfer chaining.) + * + * Returns the number of the channel, else negative errno. + */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, + enum dma_event_q eventq_no) +{ + if (channel < 0) { + channel = 0; + for (;;) { + channel = find_next_bit(edma_noevent, + num_channels, channel); + if (channel == num_channels) + return -ENOMEM; + if (!test_and_set_bit(channel, edma_inuse)) + break; + channel++; + } + } else if (channel >= num_channels) { + return -EINVAL; + } else if (test_and_set_bit(channel, edma_inuse)) { + return -EBUSY; + } + + /* ensure access through shadow region 0 */ + edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f)); + + /* ensure no events are pending */ + edma_stop(channel); + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + + if (callback) + setup_dma_interrupt(channel, callback, data); + + map_dmach_queue(channel, eventq_no); + + return channel; +} +EXPORT_SYMBOL(edma_alloc_channel); + + +/** + * edma_free_channel - deallocate DMA channel + * @channel: dma channel returned from edma_alloc_channel() + * + * This deallocates the DMA channel and associated parameter RAM slot + * allocated by edma_alloc_channel(). + * + * Callers are responsible for ensuring the channel is inactive, and + * will not be reactivated by linking, chaining, or software calls to + * edma_start(). + */ +void edma_free_channel(unsigned channel) +{ + if (channel >= num_channels) + return; + + setup_dma_interrupt(channel, NULL, NULL); + /* REVISIT should probably take out of shadow region 0 */ + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + clear_bit(channel, edma_inuse); +} +EXPORT_SYMBOL(edma_free_channel); + +/** + * edma_alloc_slot - allocate DMA parameter RAM + * @slot: specific slot to allocate; negative for "any unused slot" + * + * This allocates a parameter RAM slot, initializing it to hold a + * dummy transfer. Slots allocated using this routine have not been + * mapped to a hardware DMA channel, and will normally be used by + * linking to them from a slot associated with a DMA channel. + * + * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific + * slots may be allocated on behalf of DSP firmware. + * + * Returns the number of the slot, else negative errno. + */ +int edma_alloc_slot(int slot) +{ + if (slot < 0) { + slot = num_channels; + for (;;) { + slot = find_next_zero_bit(edma_inuse, + num_slots, slot); + if (slot == num_slots) + return -ENOMEM; + if (!test_and_set_bit(slot, edma_inuse)) + break; + } + } else if (slot < num_channels || slot >= num_slots) { + return -EINVAL; + } else if (test_and_set_bit(slot, edma_inuse)) { + return -EBUSY; + } + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + + return slot; +} +EXPORT_SYMBOL(edma_alloc_slot); + +/** + * edma_free_slot - deallocate DMA parameter RAM + * @slot: parameter RAM slot returned from edma_alloc_slot() + * + * This deallocates the parameter RAM slot allocated by edma_alloc_slot(). + * Callers are responsible for ensuring the slot is inactive, and will + * not be activated. + */ +void edma_free_slot(unsigned slot) +{ + if (slot < num_channels || slot >= num_slots) + return; + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + clear_bit(slot, edma_inuse); +} +EXPORT_SYMBOL(edma_free_slot); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (i) -- read/write partial slots */ + +/** + * edma_set_src - set initial DMA source address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @src_port: physical address of source (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the source address is modified during the DMA transfer + * according to edma_set_src_index(). + */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set SAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8)); + } else { + /* clear SAM */ + i &= ~SAM; + } + edma_parm_write(PARM_OPT, slot, i); + + /* set the source port address + in source register of param structure */ + edma_parm_write(PARM_SRC, slot, src_port); + } +} +EXPORT_SYMBOL(edma_set_src); + +/** + * edma_set_dest - set initial DMA destination address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @dest_port: physical address of destination (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the destination address is modified during the DMA transfer + * according to edma_set_dest_index(). + */ +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set DAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8)); + } else { + /* clear DAM */ + i &= ~DAM; + } + edma_parm_write(PARM_OPT, slot, i); + /* set the destination port address + in dest register of param structure */ + edma_parm_write(PARM_DST, slot, dest_port); + } +} +EXPORT_SYMBOL(edma_set_dest); + +/** + * edma_get_position - returns the current transfer points + * @slot: parameter RAM slot being examined + * @src: pointer to source port position + * @dst: pointer to destination port position + * + * Returns current source and destination addresses for a particular + * parameter RAM slot. Its channel should not be active when this is called. + */ +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst) +{ + struct edmacc_param temp; + + edma_read_slot(slot, &temp); + if (src != NULL) + *src = temp.src; + if (dst != NULL) + *dst = temp.dst; +} +EXPORT_SYMBOL(edma_get_position); + +/** + * edma_set_src_index - configure DMA source address indexing + * @slot: parameter RAM slot being configured + * @src_bidx: byte offset between source arrays in a frame + * @src_cidx: byte offset between source frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0xffff0000, src_bidx); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0xffff0000, src_cidx); + } +} +EXPORT_SYMBOL(edma_set_src_index); + +/** + * edma_set_dest_index - configure DMA destination address indexing + * @slot: parameter RAM slot being configured + * @dest_bidx: byte offset between destination arrays in a frame + * @dest_cidx: byte offset between destination frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0x0000ffff, dest_bidx << 16); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0x0000ffff, dest_cidx << 16); + } +} +EXPORT_SYMBOL(edma_set_dest_index); + +/** + * edma_set_transfer_params - configure DMA transfer parameters + * @slot: parameter RAM slot being configured + * @acnt: how many bytes per array (at least one) + * @bcnt: how many arrays per frame (at least one) + * @ccnt: how many frames per block (at least one) + * @bcnt_rld: used only for A-Synchronized transfers; this specifies + * the value to reload into bcnt when it decrements to zero + * @sync_mode: ASYNC or ABSYNC + * + * See the EDMA3 documentation to understand how to configure and link + * transfers using the fields in PaRAM slots. If you are not doing it + * all at once with edma_write_slot(), you will use this routine + * plus two calls each for source and destination, setting the initial + * address and saying how to index that address. + * + * An example of an A-Synchronized transfer is a serial link using a + * single word shift register. In that case, @acnt would be equal to + * that word size; the serial controller issues a DMA synchronization + * event to transfer each word, and memory access by the DMA transfer + * controller will be word-at-a-time. + * + * An example of an AB-Synchronized transfer is a device using a FIFO. + * In that case, @acnt equals the FIFO width and @bcnt equals its depth. + * The controller with the FIFO issues DMA synchronization events when + * the FIFO threshold is reached, and the DMA transfer controller will + * transfer one frame to (or from) the FIFO. It will probably use + * efficient burst modes to access memory. + */ +void edma_set_transfer_params(unsigned slot, + u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_LINK_BCNTRLD, slot, + 0x0000ffff, bcnt_rld << 16); + if (sync_mode == ASYNC) + edma_parm_and(PARM_OPT, slot, ~SYNCDIM); + else + edma_parm_or(PARM_OPT, slot, SYNCDIM); + /* Set the acount, bcount, ccount registers */ + edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt); + edma_parm_write(PARM_CCNT, slot, ccnt); + } +} +EXPORT_SYMBOL(edma_set_transfer_params); + +/** + * edma_link - link one parameter RAM slot to another + * @from: parameter RAM slot originating the link + * @to: parameter RAM slot which is the link target + * + * The originating slot should not be part of any active DMA transfer. + */ +void edma_link(unsigned from, unsigned to) +{ + if (from >= num_slots) + return; + if (to >= num_slots) + return; + edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to)); +} +EXPORT_SYMBOL(edma_link); + +/** + * edma_unlink - cut link from one parameter RAM slot + * @from: parameter RAM slot originating the link + * + * The originating slot should not be part of any active DMA transfer. + * Its link is set to 0xffff. + */ +void edma_unlink(unsigned from) +{ + if (from >= num_slots) + return; + edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff); +} +EXPORT_SYMBOL(edma_unlink); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (ii) -- read/write whole parameter sets */ + +/** + * edma_write_slot - write parameter RAM data for slot + * @slot: number of parameter RAM slot being modified + * @param: data to be written into parameter RAM slot + * + * Use this to assign all parameters of a transfer at once. This + * allows more efficient setup of transfers than issuing multiple + * calls to set up those parameters in small pieces, and provides + * complete control over all transfer options. + */ +void edma_write_slot(unsigned slot, const struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE); +} +EXPORT_SYMBOL(edma_write_slot); + +/** + * edma_read_slot - read parameter RAM data from slot + * @slot: number of parameter RAM slot being copied + * @param: where to store copy of parameter RAM data + * + * Use this to read data from a parameter RAM slot, perhaps to + * save them as a template for later reuse. + */ +void edma_read_slot(unsigned slot, struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE); +} +EXPORT_SYMBOL(edma_read_slot); + +/*-----------------------------------------------------------------------*/ + +/* Various EDMA channel control operations */ + +/** + * edma_pause - pause dma on a channel + * @channel: on which edma_start() has been called + * + * This temporarily disables EDMA hardware events on the specified channel, + * preventing them from triggering new transfers on its behalf + */ +void edma_pause(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_pause); + +/** + * edma_resume - resumes dma on a paused channel + * @channel: on which edma_pause() has been called + * + * This re-enables EDMA hardware events on the specified channel. + */ +void edma_resume(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EESR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_resume); + +/** + * edma_start - start dma on a channel + * @channel: channel being activated + * + * Channels with event associations will be triggered by their hardware + * events, and channels without such associations will be triggered by + * software. (At this writing there is no interface for using software + * triggers except with channels that don't support hardware triggers.) + * + * Returns zero on success, else negative errno. + */ +int edma_start(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + /* EDMA channels without event association */ + if (test_bit(channel, edma_noevent)) { + pr_debug("EDMA: ESR%d %08x\n", j, + edma_shadow0_read_array(SH_ESR, j)); + edma_shadow0_write_array(SH_ESR, j, mask); + return 0; + } + + /* EDMA channel with event association */ + pr_debug("EDMA: ER%d %08x\n", j, + edma_shadow0_read_array(SH_ER, j)); + /* Clear any pending error */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_shadow0_write_array(SH_EESR, j, mask); + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + return 0; + } + + return -EINVAL; +} +EXPORT_SYMBOL(edma_start); + +/** + * edma_stop - stops dma on the channel passed + * @channel: channel being deactivated + * + * When @lch is a channel, any active transfer is paused and + * all pending hardware events are cleared. The current transfer + * may not be resumed, and the channel's Parameter RAM should be + * reinitialized before being reused. + */ +void edma_stop(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, j, mask); + edma_shadow0_write_array(SH_ECR, j, mask); + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write_array(EDMA_EMCR, j, mask); + + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + + /* REVISIT: consider guarding against inappropriate event + * chaining by overwriting with dummy_paramset. + */ + } +} +EXPORT_SYMBOL(edma_stop); + +/****************************************************************************** + * + * It cleans ParamEntry qand bring back EDMA to initial state if media has + * been removed before EDMA has finished.It is usedful for removable media. + * Arguments: + * ch_no - channel no + * + * Return: zero on success, or corresponding error no on failure + * + * FIXME this should not be needed ... edma_stop() should suffice. + * + *****************************************************************************/ + +void edma_clean_channel(unsigned channel) +{ + if (channel < num_channels) { + int j = (channel >> 5); + unsigned int mask = 1 << (channel & 0x1f); + + pr_debug("EDMA: EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + edma_shadow0_write_array(SH_ECR, j, mask); + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3); + } +} +EXPORT_SYMBOL(edma_clean_channel); + +/* + * edma_clear_event - clear an outstanding event on the DMA channel + * Arguments: + * channel - channel number + */ +void edma_clear_event(unsigned channel) +{ + if (channel >= num_channels) + return; + if (channel < 32) + edma_write(EDMA_ECR, 1 << channel); + else + edma_write(EDMA_ECRH, 1 << (channel - 32)); +} +EXPORT_SYMBOL(edma_clear_event); + +/*-----------------------------------------------------------------------*/ + +static int __init edma_probe(struct platform_device *pdev) +{ + struct edma_soc_info *info = pdev->dev.platform_data; + int i; + int status; + const s8 *noevent; + int irq = 0, err_irq = 0; + struct resource *r; + resource_size_t len; + + if (!info) + return -ENODEV; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc"); + if (!r) + return -ENODEV; + + len = r->end - r->start + 1; + + r = request_mem_region(r->start, len, r->name); + if (!r) + return -EBUSY; + + edmacc_regs_base = ioremap(r->start, len); + if (!edmacc_regs_base) { + status = -EBUSY; + goto fail1; + } + + num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH); + num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY); + + dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base); + + for (i = 0; i < num_slots; i++) + memcpy_toio(edmacc_regs_base + PARM_OFFSET(i), + &dummy_paramset, PARM_SIZE); + + noevent = info->noevent; + if (noevent) { + while (*noevent != -1) + set_bit(*noevent++, edma_noevent); + } + + irq = platform_get_irq(pdev, 0); + status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + irq, status); + goto fail; + } + + err_irq = platform_get_irq(pdev, 1); + status = request_irq(err_irq, dma_ccerr_handler, 0, + "edma_error", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + err_irq, status); + goto fail; + } + + if (tc_errs_handled) { + status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0, + "edma_tc0", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + IRQ_TCERRINT0, status); + return status; + } + status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0, + "edma_tc1", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d --> %d\n", + IRQ_TCERRINT, status); + return status; + } + } + + /* Everything lives on transfer controller 1 until otherwise specified. + * This way, long transfers on the low priority queue + * started by the codec engine will not cause audio defects. + */ + for (i = 0; i < num_channels; i++) + map_dmach_queue(i, EVENTQ_1); + + /* Event queue to TC mapping */ + for (i = 0; queue_tc_mapping[i][0] != -1; i++) + map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]); + + /* Event queue priority mapping */ + for (i = 0; queue_priority_mapping[i][0] != -1; i++) + assign_priority_to_queue(queue_priority_mapping[i][0], + queue_priority_mapping[i][1]); + + for (i = 0; i < info->n_region; i++) { + edma_write_array2(EDMA_DRAE, i, 0, 0x0); + edma_write_array2(EDMA_DRAE, i, 1, 0x0); + edma_write_array(EDMA_QRAE, i, 0x0); + } + + return 0; + +fail: + if (err_irq) + free_irq(err_irq, NULL); + if (irq) + free_irq(irq, NULL); + iounmap(edmacc_regs_base); +fail1: + release_mem_region(r->start, len); + return status; +} + + +static struct platform_driver edma_driver = { + .driver.name = "edma", +}; + +static int __init edma_init(void) +{ + return platform_driver_probe(&edma_driver, edma_probe); +} +arch_initcall(edma_init); + diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index b49e9d092aa..1aba41c6351 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -20,6 +20,7 @@ #include <linux/irq.h> #include <linux/bitops.h> +#include <mach/cputype.h> #include <mach/irqs.h> #include <mach/hardware.h> #include <mach/gpio.h> @@ -36,9 +37,10 @@ struct davinci_gpio { static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; +static unsigned __initdata ngpio; /* create a non-inlined version */ -static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio) +static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio) { return __gpio_to_controller(gpio); } @@ -114,9 +116,30 @@ static int __init davinci_gpio_setup(void) { int i, base; - for (i = 0, base = 0; - i < ARRAY_SIZE(chips); - i++, base += 32) { + /* The gpio banks conceptually expose a segmented bitmap, + * and "ngpio" is one more than the largest zero-based + * bit index that's valid. + */ + if (cpu_is_davinci_dm355()) { /* or dm335() */ + ngpio = 104; + } else if (cpu_is_davinci_dm644x()) { /* or dm337() */ + ngpio = 71; + } else if (cpu_is_davinci_dm646x()) { + /* NOTE: each bank has several "reserved" bits, + * unusable as GPIOs. Only 33 of the GPIO numbers + * are usable, and we're not rejecting the others. + */ + ngpio = 43; + } else { + /* if cpu_is_davinci_dm643x() ngpio = 111 */ + pr_err("GPIO setup: how many GPIOs?\n"); + return -EINVAL; + } + + if (WARN_ON(DAVINCI_N_GPIO < ngpio)) + ngpio = DAVINCI_N_GPIO; + + for (i = 0, base = 0; base < ngpio; i++, base += 32) { chips[i].chip.label = "DaVinci"; chips[i].chip.direction_input = davinci_direction_in; @@ -125,7 +148,7 @@ static int __init davinci_gpio_setup(void) chips[i].chip.set = davinci_gpio_set; chips[i].chip.base = base; - chips[i].chip.ngpio = DAVINCI_N_GPIO - base; + chips[i].chip.ngpio = ngpio - base; if (chips[i].chip.ngpio > 32) chips[i].chip.ngpio = 32; @@ -143,11 +166,11 @@ pure_initcall(davinci_gpio_setup); * We expect irqs will normally be set up as input pins, but they can also be * used as output pins ... which is convenient for testing. * - * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition - * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have - * a good way to hook those up ... + * NOTE: The first few GPIOs also have direct INTC hookups in addition + * to their GPIOBNK0 irq, with a bit less overhead but less flexibility + * on triggering (e.g. no edge options). We don't try to use those. * - * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also + * All those INTC hookups (direct, plus several IRQ banks) can also * serve as EDMA event triggers. */ @@ -235,29 +258,42 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) } /* - * NOTE: for suspend/resume, probably best to make a sysdev (and class) - * with its suspend/resume calls hooking into the results of the set_wake() + * NOTE: for suspend/resume, probably best to make a platform_device with + * suspend_late/resume_resume calls hooking into results of the set_wake() * calls ... so if no gpios are wakeup events the clock can be disabled, * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 - * can be set appropriately for GPIOV33 pins. + * (dm6446) can be set appropriately for GPIOV33 pins. */ static int __init davinci_gpio_irq_setup(void) { unsigned gpio, irq, bank; + unsigned bank_irq; struct clk *clk; + u32 binten = 0; + + if (cpu_is_davinci_dm355()) { /* or dm335() */ + bank_irq = IRQ_DM355_GPIOBNK0; + } else if (cpu_is_davinci_dm644x()) { + bank_irq = IRQ_GPIOBNK0; + } else if (cpu_is_davinci_dm646x()) { + bank_irq = IRQ_DM646X_GPIOBNK0; + } else { + printk(KERN_ERR "Don't know first GPIO bank IRQ.\n"); + return -EINVAL; + } clk = clk_get(NULL, "gpio"); if (IS_ERR(clk)) { printk(KERN_ERR "Error %ld getting gpio clock?\n", PTR_ERR(clk)); - return 0; + return PTR_ERR(clk); } - clk_enable(clk); - for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0; - gpio < DAVINCI_N_GPIO; bank++) { + for (gpio = 0, irq = gpio_to_irq(0), bank = 0; + gpio < ngpio; + bank++, bank_irq++) { struct gpio_controller *__iomem g = gpio2controller(gpio); unsigned i; @@ -265,28 +301,28 @@ static int __init davinci_gpio_irq_setup(void) __raw_writel(~0, &g->clr_rising); /* set up all irqs in this bank */ - set_irq_chained_handler(bank, gpio_irq_handler); - set_irq_chip_data(bank, g); - set_irq_data(bank, (void *)irq); + set_irq_chained_handler(bank_irq, gpio_irq_handler); + set_irq_chip_data(bank_irq, g); + set_irq_data(bank_irq, (void *)irq); - for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO; - i++, irq++, gpio++) { + for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { set_irq_chip(irq, &gpio_irqchip); set_irq_chip_data(irq, g); set_irq_handler(irq, handle_simple_irq); set_irq_flags(irq, IRQF_VALID); } + + binten |= BIT(bank); } /* BINTEN -- per-bank interrupt enable. genirq would also let these * bits be set/cleared dynamically. */ - __raw_writel(0x1f, (void *__iomem) + __raw_writel(binten, (void *__iomem) IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08)); printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); return 0; } - arch_initcall(davinci_gpio_irq_setup); diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c index bf067d60491..018b994cd79 100644 --- a/arch/arm/mach-davinci/id.c +++ b/arch/arm/mach-davinci/id.c @@ -15,7 +15,9 @@ #include <linux/init.h> #include <linux/io.h> -#define JTAG_ID_BASE 0x01c40028 +#define JTAG_ID_BASE IO_ADDRESS(0x01c40028) + +static unsigned int davinci_revision; struct davinci_id { u8 variant; /* JTAG ID bits 31:28 */ @@ -33,6 +35,20 @@ static struct davinci_id davinci_ids[] __initdata = { .manufacturer = 0x017, .type = 0x64460000, }, + { + /* DM646X */ + .part_no = 0xb770, + .variant = 0x0, + .manufacturer = 0x017, + .type = 0x64670000, + }, + { + /* DM355 */ + .part_no = 0xb73b, + .variant = 0x0, + .manufacturer = 0x00f, + .type = 0x03550000, + }, }; /* @@ -42,7 +58,7 @@ static u16 __init davinci_get_part_no(void) { u32 dev_id, part_no; - dev_id = davinci_readl(JTAG_ID_BASE); + dev_id = __raw_readl(JTAG_ID_BASE); part_no = ((dev_id >> 12) & 0xffff); @@ -56,13 +72,19 @@ static u8 __init davinci_get_variant(void) { u32 variant; - variant = davinci_readl(JTAG_ID_BASE); + variant = __raw_readl(JTAG_ID_BASE); variant = (variant >> 28) & 0xf; return variant; } +unsigned int davinci_rev(void) +{ + return davinci_revision >> 16; +} +EXPORT_SYMBOL(davinci_rev); + void __init davinci_check_revision(void) { int i; @@ -75,7 +97,7 @@ void __init davinci_check_revision(void) /* First check only the major version in a safe way */ for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { if (part_no == (davinci_ids[i].part_no)) { - system_rev = davinci_ids[i].type; + davinci_revision = davinci_ids[i].type; break; } } @@ -84,10 +106,11 @@ void __init davinci_check_revision(void) for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { if (part_no == davinci_ids[i].part_no && variant == davinci_ids[i].variant) { - system_rev = davinci_ids[i].type; + davinci_revision = davinci_ids[i].type; break; } } - printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant); + printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n", + davinci_rev(), variant); } diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h new file mode 100644 index 00000000000..3216f21c123 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h @@ -0,0 +1,20 @@ +/* + * DaVinci DM6446 EVM board specific headers + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or ifndef. + */ + +#ifndef _MACH_DAVINCI_DM6446EVM_H +#define _MACH_DAVINCI_DM6446EVM_H + +#include <linux/types.h> + +int dm6446evm_eeprom_read(char *buf, off_t off, size_t count); +int dm6446evm_eeprom_write(char *buf, off_t off, size_t count); + +#endif diff --git a/arch/arm/mach-davinci/include/mach/clkdev.h b/arch/arm/mach-davinci/include/mach/clkdev.h new file mode 100644 index 00000000000..730c49d1ebd --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/clkdev.h @@ -0,0 +1,13 @@ +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +static inline int __clk_get(struct clk *clk) +{ + return 1; +} + +static inline void __clk_put(struct clk *clk) +{ +} + +#endif diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h index 38bdd49bc18..a3b04021987 100644 --- a/arch/arm/mach-davinci/include/mach/clock.h +++ b/arch/arm/mach-davinci/include/mach/clock.h @@ -17,6 +17,5 @@ struct clk; extern int clk_register(struct clk *clk); extern void clk_unregister(struct clk *clk); -extern int davinci_clk_init(void); #endif diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 4b522e5c70e..19177097625 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -16,6 +16,12 @@ struct sys_timer; extern struct sys_timer davinci_timer; +extern void davinci_irq_init(void); +extern void davinci_map_common_io(void); + +/* parameters describe VBUS sourcing for host mode */ +extern void setup_usb(unsigned mA, unsigned potpgt_msec); + /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h new file mode 100644 index 00000000000..27cfb1b3a66 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -0,0 +1,49 @@ +/* + * DaVinci CPU type detection + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * Defines the cpu_is_*() macros for runtime detection of DaVinci + * device type. In addtion, if support for a given device is not + * compiled in to the kernel, the macros return 0 so that + * resulting code can be optimized out. + * + * 2009 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef _ASM_ARCH_CPU_H +#define _ASM_ARCH_CPU_H + +extern unsigned int davinci_rev(void); + +#define IS_DAVINCI_CPU(type, id) \ +static inline int is_davinci_dm ##type(void) \ +{ \ + return (davinci_rev() == (id)) ? 1 : 0; \ +} + +IS_DAVINCI_CPU(644x, 0x6446) +IS_DAVINCI_CPU(646x, 0x6467) +IS_DAVINCI_CPU(355, 0x355) + +#ifdef CONFIG_ARCH_DAVINCI_DM644x +#define cpu_is_davinci_dm644x() is_davinci_dm644x() +#else +#define cpu_is_davinci_dm644x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM646x +#define cpu_is_davinci_dm646x() is_davinci_dm646x() +#else +#define cpu_is_davinci_dm646x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM355 +#define cpu_is_davinci_dm355() is_davinci_dm355() +#else +#define cpu_is_davinci_dm355() 0 +#endif + +#endif diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h new file mode 100644 index 00000000000..3dcb9f4e58b --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -0,0 +1,37 @@ +/* + * This file contains the processor specific definitions + * of the TI DM644x. + * + * Copyright (C) 2008 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __ASM_ARCH_DM644X_H +#define __ASM_ARCH_DM644X_H + +#include <linux/platform_device.h> +#include <mach/hardware.h> + +#define DM644X_EMAC_BASE (0x01C80000) +#define DM644X_EMAC_CNTRL_OFFSET (0x0000) +#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000) +#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000) +#define DM644X_EMAC_MDIO_OFFSET (0x4000) +#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) + +void __init dm644x_init(void); + +#endif /* __ASM_ARCH_DM644X_H */ diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h new file mode 100644 index 00000000000..f6fc5396daf --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -0,0 +1,228 @@ +/* + * TI DAVINCI dma definitions + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * This EDMA3 programming framework exposes two basic kinds of resource: + * + * Channel Triggers transfers, usually from a hardware event but + * also manually or by "chaining" from DMA completions. + * Each channel is coupled to a Parameter RAM (PaRAM) slot. + * + * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM + * "set"), source and destination addresses, a link to a + * next PaRAM slot (if any), options for the transfer, and + * instructions for updating those addresses. There are + * more than twice as many slots as event channels. + * + * Each PaRAM set describes a sequence of transfers, either for one large + * buffer or for several discontiguous smaller buffers. An EDMA transfer + * is driven only from a channel, which performs the transfers specified + * in its PaRAM slot until there are no more transfers. When that last + * transfer completes, the "link" field may be used to reload the channel's + * PaRAM slot with a new transfer descriptor. + * + * The EDMA Channel Controller (CC) maps requests from channels into physical + * Transfer Controller (TC) requests when the channel triggers (by hardware + * or software events, or by chaining). The two physical DMA channels provided + * by the TCs are thus shared by many logical channels. + * + * DaVinci hardware also has a "QDMA" mechanism which is not currently + * supported through this interface. (DSP firmware uses it though.) + */ + +#ifndef EDMA_H_ +#define EDMA_H_ + +/* PaRAM slots are laid out like this */ +struct edmacc_param { + unsigned int opt; + unsigned int src; + unsigned int a_b_cnt; + unsigned int dst; + unsigned int src_dst_bidx; + unsigned int link_bcntrld; + unsigned int src_dst_cidx; + unsigned int ccnt; +}; + +#define CCINT0_INTERRUPT 16 +#define CCERRINT_INTERRUPT 17 +#define TCERRINT0_INTERRUPT 18 +#define TCERRINT1_INTERRUPT 19 + +/* fields in edmacc_param.opt */ +#define SAM BIT(0) +#define DAM BIT(1) +#define SYNCDIM BIT(2) +#define STATIC BIT(3) +#define EDMA_FWID (0x07 << 8) +#define TCCMODE BIT(11) +#define EDMA_TCC(t) ((t) << 12) +#define TCINTEN BIT(20) +#define ITCINTEN BIT(21) +#define TCCHEN BIT(22) +#define ITCCHEN BIT(23) + +#define TRWORD (0x7<<2) +#define PAENTRY (0x1ff<<5) + +/* Drivers should avoid using these symbolic names for dm644x + * channels, and use platform_device IORESOURCE_DMA resources + * instead. (Other DaVinci chips have different peripherals + * and thus have different DMA channel mappings.) + */ +#define DAVINCI_DMA_MCBSP_TX 2 +#define DAVINCI_DMA_MCBSP_RX 3 +#define DAVINCI_DMA_VPSS_HIST 4 +#define DAVINCI_DMA_VPSS_H3A 5 +#define DAVINCI_DMA_VPSS_PRVU 6 +#define DAVINCI_DMA_VPSS_RSZ 7 +#define DAVINCI_DMA_IMCOP_IMXINT 8 +#define DAVINCI_DMA_IMCOP_VLCDINT 9 +#define DAVINCI_DMA_IMCO_PASQINT 10 +#define DAVINCI_DMA_IMCOP_DSQINT 11 +#define DAVINCI_DMA_SPI_SPIX 16 +#define DAVINCI_DMA_SPI_SPIR 17 +#define DAVINCI_DMA_UART0_URXEVT0 18 +#define DAVINCI_DMA_UART0_UTXEVT0 19 +#define DAVINCI_DMA_UART1_URXEVT1 20 +#define DAVINCI_DMA_UART1_UTXEVT1 21 +#define DAVINCI_DMA_UART2_URXEVT2 22 +#define DAVINCI_DMA_UART2_UTXEVT2 23 +#define DAVINCI_DMA_MEMSTK_MSEVT 24 +#define DAVINCI_DMA_MMCRXEVT 26 +#define DAVINCI_DMA_MMCTXEVT 27 +#define DAVINCI_DMA_I2C_ICREVT 28 +#define DAVINCI_DMA_I2C_ICXEVT 29 +#define DAVINCI_DMA_GPIO_GPINT0 32 +#define DAVINCI_DMA_GPIO_GPINT1 33 +#define DAVINCI_DMA_GPIO_GPINT2 34 +#define DAVINCI_DMA_GPIO_GPINT3 35 +#define DAVINCI_DMA_GPIO_GPINT4 36 +#define DAVINCI_DMA_GPIO_GPINT5 37 +#define DAVINCI_DMA_GPIO_GPINT6 38 +#define DAVINCI_DMA_GPIO_GPINT7 39 +#define DAVINCI_DMA_GPIO_GPBNKINT0 40 +#define DAVINCI_DMA_GPIO_GPBNKINT1 41 +#define DAVINCI_DMA_GPIO_GPBNKINT2 42 +#define DAVINCI_DMA_GPIO_GPBNKINT3 43 +#define DAVINCI_DMA_GPIO_GPBNKINT4 44 +#define DAVINCI_DMA_TIMER0_TINT0 48 +#define DAVINCI_DMA_TIMER1_TINT1 49 +#define DAVINCI_DMA_TIMER2_TINT2 50 +#define DAVINCI_DMA_TIMER3_TINT3 51 +#define DAVINCI_DMA_PWM0 52 +#define DAVINCI_DMA_PWM1 53 +#define DAVINCI_DMA_PWM2 54 + +/*ch_status paramater of callback function possible values*/ +#define DMA_COMPLETE 1 +#define DMA_CC_ERROR 2 +#define DMA_TC1_ERROR 3 +#define DMA_TC2_ERROR 4 + +enum address_mode { + INCR = 0, + FIFO = 1 +}; + +enum fifo_width { + W8BIT = 0, + W16BIT = 1, + W32BIT = 2, + W64BIT = 3, + W128BIT = 4, + W256BIT = 5 +}; + +enum dma_event_q { + EVENTQ_0 = 0, + EVENTQ_1 = 1, + EVENTQ_DEFAULT = -1 +}; + +enum sync_dimension { + ASYNC = 0, + ABSYNC = 1 +}; + +#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ +#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ + +/* alloc/free DMA channels and their dedicated parameter RAM slots */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, enum dma_event_q); +void edma_free_channel(unsigned channel); + +/* alloc/free parameter RAM slots */ +int edma_alloc_slot(int slot); +void edma_free_slot(unsigned slot); + +/* calls that operate on part of a parameter RAM slot */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width); +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width); +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst); +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); +void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode); +void edma_link(unsigned from, unsigned to); +void edma_unlink(unsigned from); + +/* calls that operate on an entire parameter RAM slot */ +void edma_write_slot(unsigned slot, const struct edmacc_param *params); +void edma_read_slot(unsigned slot, struct edmacc_param *params); + +/* channel control operations */ +int edma_start(unsigned channel); +void edma_stop(unsigned channel); +void edma_clean_channel(unsigned channel); +void edma_clear_event(unsigned channel); +void edma_pause(unsigned channel); +void edma_resume(unsigned channel); + +/* UNRELATED TO DMA */ +int davinci_alloc_iram(unsigned size); +void davinci_free_iram(unsigned addr, unsigned size); + +/* platform_data for EDMA driver */ +struct edma_soc_info { + + /* how many dma resources of each type */ + unsigned n_channel; + unsigned n_region; + unsigned n_slot; + unsigned n_tc; + + /* list of channels with no even trigger; terminated by "-1" */ + const s8 *noevent; +}; + +#endif diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index b456f079f43..efe3281364e 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -15,9 +15,11 @@ #include <linux/io.h> #include <asm-generic/gpio.h> -#include <mach/hardware.h> + #include <mach/irqs.h> +#define DAVINCI_GPIO_BASE 0x01C67000 + /* * basic gpio routines * @@ -26,23 +28,18 @@ * go through boot loaders. * * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are + * need to pay attention to PINMUX registers to be sure those pins are * used as gpios, not with other peripherals. * * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code should write GPIO(N) or: - * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53) - * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70) - * - * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc - * for now, that's != GPIO(N) + * and maybe for later updates, code may write GPIO(N). These may be + * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip + * may not support all the GPIOs in that range. * * GPIOs can also be on external chips, numbered after the ones built-in * to the DaVinci chip. For now, they won't be usable as IRQ sources. */ -#define GPIO(X) (X) /* 0 <= X <= 70 */ -#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */ -#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ struct gpio_controller { u32 dir; @@ -71,12 +68,14 @@ __gpio_to_controller(unsigned gpio) { void *__iomem ptr; - if (gpio < 32) + if (gpio < 32 * 1) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10); - else if (gpio < 64) + else if (gpio < 32 * 2) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38); - else if (gpio < DAVINCI_N_GPIO) + else if (gpio < 32 * 3) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60); + else if (gpio < 32 * 4) + ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88); else ptr = NULL; return ptr; diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index a2e8969afac..48c77934d51 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -1,9 +1,9 @@ /* - * Common hardware definitions + * Hardware definitions common to all DaVinci family processors * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> + * Author: Kevin Hilman, Deep Root Systems, LLC * - * 2007 (c) MontaVista Software, Inc. This file is licensed under + * 2007 (c) Deep Root Systems, LLC. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. @@ -12,41 +12,16 @@ #define __ASM_ARCH_HARDWARE_H /* - * Base register addresses + * Before you add anything to ths file: + * + * This header is for defines common to ALL DaVinci family chips. + * Anything that is chip specific should go in <chipname>.h, + * and the chip/board init code should then explicitly include + * <chipname>.h */ -#define DAVINCI_DMA_3PCC_BASE (0x01C00000) -#define DAVINCI_DMA_3PTC0_BASE (0x01C10000) -#define DAVINCI_DMA_3PTC1_BASE (0x01C10400) -#define DAVINCI_I2C_BASE (0x01C21000) -#define DAVINCI_PWM0_BASE (0x01C22000) -#define DAVINCI_PWM1_BASE (0x01C22400) -#define DAVINCI_PWM2_BASE (0x01C22800) -#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000) -#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800) -#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00) -#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000) -#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000) -#define DAVINCI_IEEE1394_BASE (0x01C60000) -#define DAVINCI_USB_OTG_BASE (0x01C64000) -#define DAVINCI_CFC_ATA_BASE (0x01C66000) -#define DAVINCI_SPI_BASE (0x01C66800) -#define DAVINCI_GPIO_BASE (0x01C67000) -#define DAVINCI_UHPI_BASE (0x01C67800) -#define DAVINCI_VPSS_REGS_BASE (0x01C70000) -#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000) -#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000) -#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000) -#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000) -#define DAVINCI_IMCOP_BASE (0x01CC0000) -#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000) -#define DAVINCI_VLYNQ_BASE (0x01E01000) -#define DAVINCI_MCBSP_BASE (0x01E02000) -#define DAVINCI_MMC_SD_BASE (0x01E10000) -#define DAVINCI_MS_BASE (0x01E20000) -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000) -#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000) +#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 + +/* System control register offsets */ +#define DM64XX_VDD3P3V_PWDN 0x48 #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h index a48795fd241..2479785405a 100644 --- a/arch/arm/mach-davinci/include/mach/io.h +++ b/arch/arm/mach-davinci/include/mach/io.h @@ -40,22 +40,12 @@ #else #define IOMEM(x) ((void __force __iomem *)(x)) -/* - * Functions to access the DaVinci IO region - * - * NOTE: - Use davinci_read/write[bwl] for physical register addresses - * - Use __raw_read/write[bwl]() for virtual register addresses - * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses - * - DO NOT use hardcoded virtual addresses to allow changing the - * IO address space again if needed - */ -#define davinci_readb(a) __raw_readb(IO_ADDRESS(a)) -#define davinci_readw(a) __raw_readw(IO_ADDRESS(a)) -#define davinci_readl(a) __raw_readl(IO_ADDRESS(a)) +#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t) +#define __arch_iounmap(v) davinci_iounmap(v) -#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a)) -#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a)) -#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a)) +void __iomem *davinci_ioremap(unsigned long phys, size_t size, + unsigned int type); +void davinci_iounmap(volatile void __iomem *addr); #endif /* __ASSEMBLER__ */ #endif /* __ASM_ARCH_IO_H */ diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index f4c5ca6da9f..18066074c99 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -96,10 +96,111 @@ #define IRQ_EMUINT 63 #define DAVINCI_N_AINTC_IRQ 64 -#define DAVINCI_N_GPIO 71 +#define DAVINCI_N_GPIO 104 #define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO) #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34 +/* DaVinci DM6467-specific Interrupts */ +#define IRQ_DM646X_VP_VERTINT0 0 +#define IRQ_DM646X_VP_VERTINT1 1 +#define IRQ_DM646X_VP_VERTINT2 2 +#define IRQ_DM646X_VP_VERTINT3 3 +#define IRQ_DM646X_VP_ERRINT 4 +#define IRQ_DM646X_RESERVED_1 5 +#define IRQ_DM646X_RESERVED_2 6 +#define IRQ_DM646X_WDINT 7 +#define IRQ_DM646X_CRGENINT0 8 +#define IRQ_DM646X_CRGENINT1 9 +#define IRQ_DM646X_TSIFINT0 10 +#define IRQ_DM646X_TSIFINT1 11 +#define IRQ_DM646X_VDCEINT 12 +#define IRQ_DM646X_USBINT 13 +#define IRQ_DM646X_USBDMAINT 14 +#define IRQ_DM646X_PCIINT 15 +#define IRQ_DM646X_TCERRINT2 20 +#define IRQ_DM646X_TCERRINT3 21 +#define IRQ_DM646X_IDE 22 +#define IRQ_DM646X_HPIINT 23 +#define IRQ_DM646X_EMACRXTHINT 24 +#define IRQ_DM646X_EMACRXINT 25 +#define IRQ_DM646X_EMACTXINT 26 +#define IRQ_DM646X_EMACMISCINT 27 +#define IRQ_DM646X_MCASP0TXINT 28 +#define IRQ_DM646X_MCASP0RXINT 29 +#define IRQ_DM646X_RESERVED_3 31 +#define IRQ_DM646X_MCASP1TXINT 32 +#define IRQ_DM646X_VLQINT 38 +#define IRQ_DM646X_UARTINT2 42 +#define IRQ_DM646X_SPINT0 43 +#define IRQ_DM646X_SPINT1 44 +#define IRQ_DM646X_DSP2ARMINT 45 +#define IRQ_DM646X_RESERVED_4 46 +#define IRQ_DM646X_PSCINT 47 +#define IRQ_DM646X_GPIO0 48 +#define IRQ_DM646X_GPIO1 49 +#define IRQ_DM646X_GPIO2 50 +#define IRQ_DM646X_GPIO3 51 +#define IRQ_DM646X_GPIO4 52 +#define IRQ_DM646X_GPIO5 53 +#define IRQ_DM646X_GPIO6 54 +#define IRQ_DM646X_GPIO7 55 +#define IRQ_DM646X_GPIOBNK0 56 +#define IRQ_DM646X_GPIOBNK1 57 +#define IRQ_DM646X_GPIOBNK2 58 +#define IRQ_DM646X_DDRINT 59 +#define IRQ_DM646X_AEMIFINT 60 + +/* DaVinci DM355-specific Interrupts */ +#define IRQ_DM355_CCDC_VDINT0 0 +#define IRQ_DM355_CCDC_VDINT1 1 +#define IRQ_DM355_CCDC_VDINT2 2 +#define IRQ_DM355_IPIPE_HST 3 +#define IRQ_DM355_H3AINT 4 +#define IRQ_DM355_IPIPE_SDR 5 +#define IRQ_DM355_IPIPEIFINT 6 +#define IRQ_DM355_OSDINT 7 +#define IRQ_DM355_VENCINT 8 +#define IRQ_DM355_IMCOPINT 11 +#define IRQ_DM355_RTOINT 13 +#define IRQ_DM355_TINT4 13 +#define IRQ_DM355_TINT2_TINT12 13 +#define IRQ_DM355_UARTINT2 14 +#define IRQ_DM355_TINT5 14 +#define IRQ_DM355_TINT2_TINT34 14 +#define IRQ_DM355_TINT6 15 +#define IRQ_DM355_TINT3_TINT12 15 +#define IRQ_DM355_SPINT1_0 17 +#define IRQ_DM355_SPINT1_1 18 +#define IRQ_DM355_SPINT2_0 19 +#define IRQ_DM355_SPINT2_1 21 +#define IRQ_DM355_TINT7 22 +#define IRQ_DM355_TINT3_TINT34 22 +#define IRQ_DM355_SDIOINT0 23 +#define IRQ_DM355_MMCINT0 26 +#define IRQ_DM355_MSINT 26 +#define IRQ_DM355_MMCINT1 27 +#define IRQ_DM355_PWMINT3 28 +#define IRQ_DM355_SDIOINT1 31 +#define IRQ_DM355_SPINT0_0 42 +#define IRQ_DM355_SPINT0_1 43 +#define IRQ_DM355_GPIO0 44 +#define IRQ_DM355_GPIO1 45 +#define IRQ_DM355_GPIO2 46 +#define IRQ_DM355_GPIO3 47 +#define IRQ_DM355_GPIO4 48 +#define IRQ_DM355_GPIO5 49 +#define IRQ_DM355_GPIO6 50 +#define IRQ_DM355_GPIO7 51 +#define IRQ_DM355_GPIO8 52 +#define IRQ_DM355_GPIO9 53 +#define IRQ_DM355_GPIOBNK0 54 +#define IRQ_DM355_GPIOBNK1 55 +#define IRQ_DM355_GPIOBNK2 56 +#define IRQ_DM355_GPIOBNK3 57 +#define IRQ_DM355_GPIOBNK4 58 +#define IRQ_DM355_GPIOBNK5 59 +#define IRQ_DM355_GPIOBNK6 60 + #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index c24b6782804..bae22cb3e27 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -1,55 +1,183 @@ /* - * DaVinci pin multiplexing defines + * Table of the DAVINCI register configurations for the PINMUX combinations * * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> * + * Based on linux/include/asm-arm/arch-omap/mux.h: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define DAVINCI_MUX_AEAW0 0 -#define DAVINCI_MUX_AEAW1 1 -#define DAVINCI_MUX_AEAW2 2 -#define DAVINCI_MUX_AEAW3 3 -#define DAVINCI_MUX_AEAW4 4 -#define DAVINCI_MUX_AECS4 10 -#define DAVINCI_MUX_AECS5 11 -#define DAVINCI_MUX_VLYNQWD0 12 -#define DAVINCI_MUX_VLYNQWD1 13 -#define DAVINCI_MUX_VLSCREN 14 -#define DAVINCI_MUX_VLYNQEN 15 -#define DAVINCI_MUX_HDIREN 16 -#define DAVINCI_MUX_ATAEN 17 -#define DAVINCI_MUX_RGB666 22 -#define DAVINCI_MUX_RGB888 23 -#define DAVINCI_MUX_LOEEN 24 -#define DAVINCI_MUX_LFLDEN 25 -#define DAVINCI_MUX_CWEN 26 -#define DAVINCI_MUX_CFLDEN 27 -#define DAVINCI_MUX_HPIEN 29 -#define DAVINCI_MUX_1394EN 30 -#define DAVINCI_MUX_EMACEN 31 - -#define DAVINCI_MUX_LEVEL2 32 -#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0) -#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1) -#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2) -#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3) -#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4) -#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5) -#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6) -#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7) -#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8) -#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9) -#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10) -#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16) -#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17) -#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18) - -extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable); - -#endif /* __ASM_ARCH_MUX_H */ + +#ifndef __INC_MACH_MUX_H +#define __INC_MACH_MUX_H + +/* System module registers */ +#define PINMUX0 0x00 +#define PINMUX1 0x04 +/* dm355 only */ +#define PINMUX2 0x08 +#define PINMUX3 0x0c +#define PINMUX4 0x10 +#define INTMUX 0x18 +#define EVTMUX 0x1c + +struct mux_config { + const char *name; + const char *mux_reg_name; + const unsigned char mux_reg; + const unsigned char mask_offset; + const unsigned char mask; + const unsigned char mode; + bool debug; +}; + +enum davinci_dm644x_index { + /* ATA and HDDIR functions */ + DM644X_HDIREN, + DM644X_ATAEN, + DM644X_ATAEN_DISABLE, + + /* HPI functions */ + DM644X_HPIEN_DISABLE, + + /* AEAW functions */ + DM644X_AEAW, + + /* Memory Stick */ + DM644X_MSTK, + + /* I2C */ + DM644X_I2C, + + /* ASP function */ + DM644X_MCBSP, + + /* UART1 */ + DM644X_UART1, + + /* UART2 */ + DM644X_UART2, + + /* PWM0 */ + DM644X_PWM0, + + /* PWM1 */ + DM644X_PWM1, + + /* PWM2 */ + DM644X_PWM2, + + /* VLYNQ function */ + DM644X_VLYNQEN, + DM644X_VLSCREN, + DM644X_VLYNQWD, + + /* EMAC and MDIO function */ + DM644X_EMACEN, + + /* GPIO3V[0:16] pins */ + DM644X_GPIO3V, + + /* GPIO pins */ + DM644X_GPIO0, + DM644X_GPIO3, + DM644X_GPIO43_44, + DM644X_GPIO46_47, + + /* VPBE */ + DM644X_RGB666, + + /* LCD */ + DM644X_LOEEN, + DM644X_LFLDEN, +}; + +enum davinci_dm646x_index { + /* ATA function */ + DM646X_ATAEN, + + /* AUDIO Clock */ + DM646X_AUDCK1, + DM646X_AUDCK0, + + /* CRGEN Control */ + DM646X_CRGMUX, + + /* VPIF Control */ + DM646X_STSOMUX_DISABLE, + DM646X_STSIMUX_DISABLE, + DM646X_PTSOMUX_DISABLE, + DM646X_PTSIMUX_DISABLE, + + /* TSIF Control */ + DM646X_STSOMUX, + DM646X_STSIMUX, + DM646X_PTSOMUX_PARALLEL, + DM646X_PTSIMUX_PARALLEL, + DM646X_PTSOMUX_SERIAL, + DM646X_PTSIMUX_SERIAL, +}; + +enum davinci_dm355_index { + /* MMC/SD 0 */ + DM355_MMCSD0, + + /* MMC/SD 1 */ + DM355_SD1_CLK, + DM355_SD1_CMD, + DM355_SD1_DATA3, + DM355_SD1_DATA2, + DM355_SD1_DATA1, + DM355_SD1_DATA0, + + /* I2C */ + DM355_I2C_SDA, + DM355_I2C_SCL, + + /* ASP0 function */ + DM355_MCBSP0_BDX, + DM355_MCBSP0_X, + DM355_MCBSP0_BFSX, + DM355_MCBSP0_BDR, + DM355_MCBSP0_R, + DM355_MCBSP0_BFSR, + + /* SPI0 */ + DM355_SPI0_SDI, + DM355_SPI0_SDENA0, + DM355_SPI0_SDENA1, + + /* IRQ muxing */ + DM355_INT_EDMA_CC, + DM355_INT_EDMA_TC0_ERR, + DM355_INT_EDMA_TC1_ERR, + + /* EDMA event muxing */ + DM355_EVT8_ASP1_TX, + DM355_EVT9_ASP1_RX, + DM355_EVT26_MMC0_RX, +}; + +#ifdef CONFIG_DAVINCI_MUX +/* setup pin muxing */ +extern void davinci_mux_init(void); +extern int davinci_mux_register(const struct mux_config *pins, + unsigned long size); +extern int davinci_cfg_reg(unsigned long reg_cfg); +#else +/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */ +static inline void davinci_mux_init(void) {} +static inline int davinci_mux_register(const struct mux_config *pins, + unsigned long size) { return 0; } +static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; } +#endif + +#endif /* __INC_MACH_MUX_H */ diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 4977aa071e1..55a90d419fa 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -38,8 +38,6 @@ #define DAVINCI_LPSC_TPTC1 4 #define DAVINCI_LPSC_EMAC 5 #define DAVINCI_LPSC_EMAC_WRAPPER 6 -#define DAVINCI_LPSC_MDIO 7 -#define DAVINCI_LPSC_IEEE1394 8 #define DAVINCI_LPSC_USB 9 #define DAVINCI_LPSC_ATA 10 #define DAVINCI_LPSC_VLYNQ 11 @@ -47,7 +45,6 @@ #define DAVINCI_LPSC_DDR_EMIF 13 #define DAVINCI_LPSC_AEMIF 14 #define DAVINCI_LPSC_MMC_SD 15 -#define DAVINCI_LPSC_MEMSTICK 16 #define DAVINCI_LPSC_McBSP 17 #define DAVINCI_LPSC_I2C 18 #define DAVINCI_LPSC_UART0 19 @@ -73,4 +70,54 @@ #define DAVINCI_LPSC_GEM 39 #define DAVINCI_LPSC_IMCOP 40 +#define DM355_LPSC_TIMER3 5 +#define DM355_LPSC_SPI1 6 +#define DM355_LPSC_MMC_SD1 7 +#define DM355_LPSC_McBSP1 8 +#define DM355_LPSC_PWM3 10 +#define DM355_LPSC_SPI2 11 +#define DM355_LPSC_RTO 12 +#define DM355_LPSC_VPSS_DAC 41 + +/* + * LPSC Assignments + */ +#define DM646X_LPSC_ARM 0 +#define DM646X_LPSC_C64X_CPU 1 +#define DM646X_LPSC_HDVICP0 2 +#define DM646X_LPSC_HDVICP1 3 +#define DM646X_LPSC_TPCC 4 +#define DM646X_LPSC_TPTC0 5 +#define DM646X_LPSC_TPTC1 6 +#define DM646X_LPSC_TPTC2 7 +#define DM646X_LPSC_TPTC3 8 +#define DM646X_LPSC_PCI 13 +#define DM646X_LPSC_EMAC 14 +#define DM646X_LPSC_VDCE 15 +#define DM646X_LPSC_VPSSMSTR 16 +#define DM646X_LPSC_VPSSSLV 17 +#define DM646X_LPSC_TSIF0 18 +#define DM646X_LPSC_TSIF1 19 +#define DM646X_LPSC_DDR_EMIF 20 +#define DM646X_LPSC_AEMIF 21 +#define DM646X_LPSC_McASP0 22 +#define DM646X_LPSC_McASP1 23 +#define DM646X_LPSC_CRGEN0 24 +#define DM646X_LPSC_CRGEN1 25 +#define DM646X_LPSC_UART0 26 +#define DM646X_LPSC_UART1 27 +#define DM646X_LPSC_UART2 28 +#define DM646X_LPSC_PWM0 29 +#define DM646X_LPSC_PWM1 30 +#define DM646X_LPSC_I2C 31 +#define DM646X_LPSC_SPI 32 +#define DM646X_LPSC_GPIO 33 +#define DM646X_LPSC_TIMER0 34 +#define DM646X_LPSC_TIMER1 35 +#define DM646X_LPSC_ARM_INTC 45 + +extern int davinci_psc_is_clk_active(unsigned int id); +extern void davinci_psc_config(unsigned int domain, unsigned int id, + char enable); + #endif /* __ASM_ARCH_PSC_H */ diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index fb8cb229bfd..632847d74a1 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -13,8 +13,23 @@ #include <mach/io.h> -#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) -#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) -#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) +#define DAVINCI_MAX_NR_UARTS 3 +#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) +#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) +#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) + +#define DM355_UART2_BASE (IO_PHYS + 0x206000) + +/* DaVinci UART register offsets */ +#define UART_DAVINCI_PWREMU 0x0c +#define UART_DM646X_SCR 0x10 +#define UART_DM646X_SCR_TX_WATERMARK 0x08 + +struct davinci_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; + +extern void davinci_serial_init(struct davinci_uart_config *); #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c index 299515f70b8..a548abb513e 100644 --- a/arch/arm/mach-davinci/io.c +++ b/arch/arm/mach-davinci/io.c @@ -51,7 +51,26 @@ void __init davinci_map_common_io(void) davinci_check_revision(); } -void __init davinci_init_common_hw(void) +#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) +#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst))) + +/* + * Intercept ioremap() requests for addresses in our fixed mapping regions. + */ +void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type) +{ + if (BETWEEN(p, IO_PHYS, IO_SIZE)) + return XLATE(p, IO_PHYS, IO_VIRT); + + return __arm_ioremap(p, size, type); +} +EXPORT_SYMBOL(davinci_ioremap); + +void davinci_iounmap(volatile void __iomem *addr) { - davinci_clk_init(); + unsigned long virt = (unsigned long)addr; + + if (virt >= VMALLOC_START && virt < VMALLOC_END) + __iounmap(addr); } +EXPORT_SYMBOL(davinci_iounmap); diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index 38021af8359..5a324c90e29 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -25,6 +25,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/cputype.h> #include <asm/mach/irq.h> #define IRQ_BIT(irq) ((irq) & 0x1f) @@ -40,14 +41,18 @@ #define IRQ_INTPRI0_REG_OFFSET 0x0030 #define IRQ_INTPRI7_REG_OFFSET 0x004C +const u8 *davinci_def_priorities; + +#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE) + static inline unsigned int davinci_irq_readl(int offset) { - return davinci_readl(DAVINCI_ARM_INTC_BASE + offset); + return __raw_readl(INTC_BASE + offset); } static inline void davinci_irq_writel(unsigned long value, int offset) { - davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset); + __raw_writel(value, INTC_BASE + offset); } /* Disable interrupt */ @@ -108,9 +113,8 @@ static struct irq_chip davinci_irq_chip_0 = { .unmask = davinci_unmask_irq, }; - /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { +static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { [IRQ_VDINT0] = 2, [IRQ_VDINT1] = 6, [IRQ_VDINT2] = 6, @@ -177,11 +181,149 @@ static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { [IRQ_EMUINT] = 7, }; +static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM646X_VP_VERTINT0] = 7, + [IRQ_DM646X_VP_VERTINT1] = 7, + [IRQ_DM646X_VP_VERTINT2] = 7, + [IRQ_DM646X_VP_VERTINT3] = 7, + [IRQ_DM646X_VP_ERRINT] = 7, + [IRQ_DM646X_RESERVED_1] = 7, + [IRQ_DM646X_RESERVED_2] = 7, + [IRQ_DM646X_WDINT] = 7, + [IRQ_DM646X_CRGENINT0] = 7, + [IRQ_DM646X_CRGENINT1] = 7, + [IRQ_DM646X_TSIFINT0] = 7, + [IRQ_DM646X_TSIFINT1] = 7, + [IRQ_DM646X_VDCEINT] = 7, + [IRQ_DM646X_USBINT] = 7, + [IRQ_DM646X_USBDMAINT] = 7, + [IRQ_DM646X_PCIINT] = 7, + [IRQ_CCINT0] = 7, /* dma */ + [IRQ_CCERRINT] = 7, /* dma */ + [IRQ_TCERRINT0] = 7, /* dma */ + [IRQ_TCERRINT] = 7, /* dma */ + [IRQ_DM646X_TCERRINT2] = 7, + [IRQ_DM646X_TCERRINT3] = 7, + [IRQ_DM646X_IDE] = 7, + [IRQ_DM646X_HPIINT] = 7, + [IRQ_DM646X_EMACRXTHINT] = 7, + [IRQ_DM646X_EMACRXINT] = 7, + [IRQ_DM646X_EMACTXINT] = 7, + [IRQ_DM646X_EMACMISCINT] = 7, + [IRQ_DM646X_MCASP0TXINT] = 7, + [IRQ_DM646X_MCASP0RXINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM646X_RESERVED_3] = 7, + [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ + [IRQ_TINT0_TINT34] = 7, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_DM646X_VLQINT] = 7, + [IRQ_I2C] = 7, + [IRQ_UARTINT0] = 7, + [IRQ_UARTINT1] = 7, + [IRQ_DM646X_UARTINT2] = 7, + [IRQ_DM646X_SPINT0] = 7, + [IRQ_DM646X_SPINT1] = 7, + [IRQ_DM646X_DSP2ARMINT] = 7, + [IRQ_DM646X_RESERVED_4] = 7, + [IRQ_DM646X_PSCINT] = 7, + [IRQ_DM646X_GPIO0] = 7, + [IRQ_DM646X_GPIO1] = 7, + [IRQ_DM646X_GPIO2] = 7, + [IRQ_DM646X_GPIO3] = 7, + [IRQ_DM646X_GPIO4] = 7, + [IRQ_DM646X_GPIO5] = 7, + [IRQ_DM646X_GPIO6] = 7, + [IRQ_DM646X_GPIO7] = 7, + [IRQ_DM646X_GPIOBNK0] = 7, + [IRQ_DM646X_GPIOBNK1] = 7, + [IRQ_DM646X_GPIOBNK2] = 7, + [IRQ_DM646X_DDRINT] = 7, + [IRQ_DM646X_AEMIFINT] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + +static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM355_CCDC_VDINT0] = 2, + [IRQ_DM355_CCDC_VDINT1] = 6, + [IRQ_DM355_CCDC_VDINT2] = 6, + [IRQ_DM355_IPIPE_HST] = 6, + [IRQ_DM355_H3AINT] = 6, + [IRQ_DM355_IPIPE_SDR] = 6, + [IRQ_DM355_IPIPEIFINT] = 6, + [IRQ_DM355_OSDINT] = 7, + [IRQ_DM355_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_DM355_RTOINT] = 4, + [IRQ_DM355_UARTINT2] = 7, + [IRQ_DM355_TINT6] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_DM355_SPINT2_1] = 7, + [IRQ_DM355_TINT7] = 4, + [IRQ_DM355_SDIOINT0] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_DM355_MMCINT1] = 7, + [IRQ_DM355_PWMINT3] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM355_SDIOINT1] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_DM355_SPINT0_0] = 3, + [IRQ_DM355_SPINT0_1] = 3, + [IRQ_DM355_GPIO0] = 3, + [IRQ_DM355_GPIO1] = 7, + [IRQ_DM355_GPIO2] = 4, + [IRQ_DM355_GPIO3] = 4, + [IRQ_DM355_GPIO4] = 7, + [IRQ_DM355_GPIO5] = 7, + [IRQ_DM355_GPIO6] = 7, + [IRQ_DM355_GPIO7] = 7, + [IRQ_DM355_GPIO8] = 7, + [IRQ_DM355_GPIO9] = 7, + [IRQ_DM355_GPIOBNK0] = 7, + [IRQ_DM355_GPIOBNK1] = 7, + [IRQ_DM355_GPIOBNK2] = 7, + [IRQ_DM355_GPIOBNK3] = 7, + [IRQ_DM355_GPIOBNK4] = 7, + [IRQ_DM355_GPIOBNK5] = 7, + [IRQ_DM355_GPIOBNK6] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { unsigned i; - const u8 *priority = default_priorities; + + if (cpu_is_davinci_dm644x()) + davinci_def_priorities = dm644x_default_priorities; + else if (cpu_is_davinci_dm646x()) + davinci_def_priorities = dm646x_default_priorities; + else if (cpu_is_davinci_dm355()) + davinci_def_priorities = dm355_default_priorities; /* Clear all interrupt requests */ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); @@ -209,8 +351,8 @@ void __init davinci_irq_init(void) unsigned j; u32 pri; - for (j = 0, pri = 0; j < 32; j += 4, priority++) - pri |= (*priority & 0x07) << j; + for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++) + pri |= (*davinci_def_priorities & 0x07) << j; davinci_irq_writel(pri, i); } diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index 8ff9d8aca60..bbba0b247a4 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -1,41 +1,103 @@ /* - * DaVinci pin multiplexing configurations + * Utility to set the DAVINCI MUX register from a table in mux.h * * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> * + * Based on linux/arch/arm/plat-omap/mux.c: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ #include <linux/io.h> +#include <linux/module.h> #include <linux/spinlock.h> #include <mach/hardware.h> - #include <mach/mux.h> -/* System control register offsets */ -#define PINMUX0 0x00 -#define PINMUX1 0x04 +static const struct mux_config *mux_table; +static unsigned long pin_table_sz; + +int __init davinci_mux_register(const struct mux_config *pins, + unsigned long size) +{ + mux_table = pins; + pin_table_sz = size; -static DEFINE_SPINLOCK(mux_lock); + return 0; +} -void davinci_mux_peripheral(unsigned int mux, unsigned int enable) +/* + * Sets the DAVINCI MUX register based on the table + */ +int __init_or_module davinci_cfg_reg(const unsigned long index) { - u32 pinmux, muxreg = PINMUX0; + static DEFINE_SPINLOCK(mux_spin_lock); + void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); + unsigned long flags; + const struct mux_config *cfg; + unsigned int reg_orig = 0, reg = 0; + unsigned int mask, warn = 0; + + if (!mux_table) + BUG(); + + if (index >= pin_table_sz) { + printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", + index, pin_table_sz); + dump_stack(); + return -ENODEV; + } + + cfg = &mux_table[index]; + + if (cfg->name == NULL) { + printk(KERN_ERR "No entry for the specified index\n"); + return -ENODEV; + } + + /* Update the mux register in question */ + if (cfg->mask) { + unsigned tmp1, tmp2; + + spin_lock_irqsave(&mux_spin_lock, flags); + reg_orig = __raw_readl(base + cfg->mux_reg); + + mask = (cfg->mask << cfg->mask_offset); + tmp1 = reg_orig & mask; + reg = reg_orig & ~mask; + + tmp2 = (cfg->mode << cfg->mask_offset); + reg |= tmp2; + + if (tmp1 != tmp2) + warn = 1; + + __raw_writel(reg, base + cfg->mux_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); + } + + if (warn) { +#ifdef CONFIG_DAVINCI_MUX_WARNINGS + printk(KERN_WARNING "MUX: initialized %s\n", cfg->name); +#endif + } - if (mux >= DAVINCI_MUX_LEVEL2) { - muxreg = PINMUX1; - mux -= DAVINCI_MUX_LEVEL2; +#ifdef CONFIG_DAVINCI_MUX_DEBUG + if (cfg->debug || warn) { + printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name); + printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n", + cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg); } +#endif - spin_lock(&mux_lock); - pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg); - if (enable) - pinmux |= (1 << mux); - else - pinmux &= ~(1 << mux); - davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg); - spin_unlock(&mux_lock); + return 0; } +EXPORT_SYMBOL(davinci_cfg_reg); diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h new file mode 100644 index 00000000000..adc86941337 --- /dev/null +++ b/arch/arm/mach-davinci/mux.h @@ -0,0 +1,51 @@ +/* + * Pin-multiplex helper macros for TI DaVinci family devices + * + * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright (C) 2008 Texas Instruments. + */ +#ifndef _MACH_DAVINCI_MUX_H_ +#define _MACH_DAVINCI_MUX_H_ + +#include <mach/mux.h> + +#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "PINMUX"#muxreg, \ + .mux_reg = PINMUX##muxreg, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "INTMUX", \ + .mux_reg = INTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "EVTMUX", \ + .mux_reg = EVTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#endif /* _MACH_DAVINCI_MUX_H */ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 58754f066d5..84171abf5f7 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -23,10 +23,13 @@ #include <linux/init.h> #include <linux/io.h> +#include <mach/cputype.h> #include <mach/hardware.h> #include <mach/psc.h> #include <mach/mux.h> +#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 + /* PSC register offsets */ #define EPCPR 0x070 #define PTCMD 0x120 @@ -36,102 +39,61 @@ #define MDSTAT 0x800 #define MDCTL 0xA00 -/* System control register offsets */ -#define VDD3P3V_PWDN 0x48 +#define MDSTAT_STATE_MASK 0x1f -static void davinci_psc_mux(unsigned int id) +/* Return nonzero iff the domain's clock is active */ +int __init davinci_psc_is_clk_active(unsigned int id) { - switch (id) { - case DAVINCI_LPSC_ATA: - davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1); - davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1); - break; - case DAVINCI_LPSC_MMC_SD: - /* VDD power manupulations are done in U-Boot for CPMAC - * so applies to MMC as well - */ - /*Set up the pull regiter for MMC */ - davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN); - davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0); - break; - case DAVINCI_LPSC_I2C: - davinci_mux_peripheral(DAVINCI_MUX_I2C, 1); - break; - case DAVINCI_LPSC_McBSP: - davinci_mux_peripheral(DAVINCI_MUX_ASP, 1); - break; - default: - break; - } + void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + + /* if clocked, state can be "Enable" or "SyncReset" */ + return mdstat & BIT(12); } /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; + void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */ - mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); - if (enable) - mdctl |= 0x00000003; /* Enable Module */ - else - mdctl &= 0xFFFFFFF2; /* Disable Module */ - davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); + mdctl = __raw_readl(psc_base + MDCTL + 4 * id); + mdctl &= ~MDSTAT_STATE_MASK; + mdctl |= next_state; + __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT); + pdstat = __raw_readl(psc_base + PDSTAT); if ((pdstat & 0x00000001) == 0) { - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x1; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - EPCPR); + epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x100; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } else { ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - PTSTAT); + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } - if (enable) - mdstat_mask = 0x3; - else - mdstat_mask = 0x2; - do { - mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - MDSTAT + 4 * id); - } while (!((mdstat & 0x0000001F) == mdstat_mask)); - - if (enable) - davinci_psc_mux(id); -} - -void __init davinci_psc_init(void) -{ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1); - - /* Turn on WatchDog timer LPSC. Needed for RESET to work */ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1); + mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + } while (!((mdstat & MDSTAT_STATE_MASK) == next_state)); } diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 3010f997125..69507579652 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -32,32 +32,47 @@ #include <mach/hardware.h> #include <mach/serial.h> #include <mach/irqs.h> +#include <mach/cputype.h> +#include "clock.h" -#define UART_DAVINCI_PWREMU 0x0c - -static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up, - int offset) +static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, + int offset) { offset <<= up->regshift; - return (unsigned int)__raw_readb(up->membase + offset); + return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset); } -static inline void davinci_serial_outp(struct plat_serial8250_port *p, - int offset, int value) +static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, + int value) { offset <<= p->regshift; - __raw_writeb(value, p->membase + offset); + __raw_writel(value, IO_ADDRESS(p->mapbase) + offset); } static struct plat_serial8250_port serial_platform_data[] = { { - .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE), - .mapbase = (unsigned long)DAVINCI_UART0_BASE, + .mapbase = DAVINCI_UART0_BASE, .irq = IRQ_UARTINT0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = 27000000, }, { .flags = 0 @@ -74,22 +89,68 @@ static struct platform_device serial_device = { static void __init davinci_serial_reset(struct plat_serial8250_port *p) { - /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ unsigned int pwremu = 0; - davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */ + serial_write_reg(p, UART_IER, 0); /* disable all interrupts */ - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); mdelay(10); pwremu |= (0x3 << 13); pwremu |= 0x1; - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); + + if (cpu_is_davinci_dm646x()) + serial_write_reg(p, UART_DM646X_SCR, + UART_DM646X_SCR_TX_WATERMARK); +} + +void __init davinci_serial_init(struct davinci_uart_config *info) +{ + int i; + char name[16]; + struct clk *uart_clk; + struct device *dev = &serial_device.dev; + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) { + struct plat_serial8250_port *p = serial_platform_data + i; + + if (!(info->enabled_uarts & (1 << i))) { + p->flags = 0; + continue; + } + + if (cpu_is_davinci_dm646x()) + p->iotype = UPIO_MEM32; + + if (cpu_is_davinci_dm355()) { + if (i == 2) { + p->mapbase = (unsigned long)DM355_UART2_BASE; + p->irq = IRQ_DM355_UARTINT2; + } + } + + sprintf(name, "uart%d", i); + uart_clk = clk_get(dev, name); + if (IS_ERR(uart_clk)) + printk(KERN_ERR "%s:%d: failed to get UART%d clock\n", + __func__, __LINE__, i); + else { + clk_enable(uart_clk); + p->uartclk = clk_get_rate(uart_clk); + davinci_serial_reset(p); + } + } } static int __init davinci_init(void) { - davinci_serial_reset(&serial_platform_data[0]); return platform_device_register(&serial_device); } diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index f8bcd29d17a..494e01bff5c 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -16,6 +16,9 @@ #include <linux/clockchips.h> #include <linux/spinlock.h> #include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/device.h> #include <mach/hardware.h> #include <asm/system.h> @@ -24,8 +27,11 @@ #include <asm/mach/time.h> #include <asm/errno.h> #include <mach/io.h> +#include <mach/cputype.h> +#include "clock.h" static struct clock_event_device clockevent_davinci; +static unsigned int davinci_clock_tick_rate; #define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) #define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) @@ -99,9 +105,9 @@ struct timer_s { unsigned int id; unsigned long period; unsigned long opts; - unsigned long reg_base; - unsigned long tim_reg; - unsigned long prd_reg; + void __iomem *base; + unsigned long tim_off; + unsigned long prd_off; unsigned long enamode_shift; struct irqaction irqaction; }; @@ -114,15 +120,15 @@ static struct timer_s timers[]; static int timer32_config(struct timer_s *t) { - u32 tcr = davinci_readl(t->reg_base + TCR); + u32 tcr = __raw_readl(t->base + TCR); /* disable timer */ tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); - davinci_writel(tcr, t->reg_base + TCR); + __raw_writel(tcr, t->base + TCR); /* reset counter to zero, set new period */ - davinci_writel(0, t->tim_reg); - davinci_writel(t->period, t->prd_reg); + __raw_writel(0, t->base + t->tim_off); + __raw_writel(t->period, t->base + t->prd_off); /* Set enable mode */ if (t->opts & TIMER_OPTS_ONESHOT) { @@ -131,13 +137,13 @@ static int timer32_config(struct timer_s *t) tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; } - davinci_writel(tcr, t->reg_base + TCR); + __raw_writel(tcr, t->base + TCR); return 0; } static inline u32 timer32_read(struct timer_s *t) { - return davinci_readl(t->tim_reg); + return __raw_readl(t->base + t->tim_off); } static irqreturn_t timer_interrupt(int irq, void *dev_id) @@ -176,51 +182,54 @@ static struct timer_s timers[] = { static void __init timer_init(void) { - u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; + u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; int i; /* Global init of each 64-bit timer as a whole */ for(i=0; i<2; i++) { - u32 tgcr, base = bases[i]; + u32 tgcr; + void __iomem *base = IO_ADDRESS(phys_bases[i]); /* Disabled, Internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset both timers, no pre-scaler for timer34 */ tgcr = 0; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Set both timers to unchained 32-bit */ tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Unreset timers */ tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Init both counters to zero */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); } /* Init of each timer as a 32-bit timer */ for (i=0; i< ARRAY_SIZE(timers); i++) { struct timer_s *t = &timers[i]; + u32 phys_base; if (t->name) { t->id = i; - t->reg_base = (IS_TIMER1(t->id) ? + phys_base = (IS_TIMER1(t->id) ? DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE); + t->base = IO_ADDRESS(phys_base); if (IS_TIMER_BOT(t->id)) { t->enamode_shift = 6; - t->tim_reg = t->reg_base + TIM12; - t->prd_reg = t->reg_base + PRD12; + t->tim_off = TIM12; + t->prd_off = PRD12; } else { t->enamode_shift = 22; - t->tim_reg = t->reg_base + TIM34; - t->prd_reg = t->reg_base + PRD34; + t->tim_off = TIM34; + t->prd_off = PRD34; } /* Register interrupt */ @@ -238,7 +247,7 @@ static void __init timer_init(void) /* * clocksource */ -static cycle_t read_cycles(void) +static cycle_t read_cycles(struct clocksource *cs) { struct timer_s *t = &timers[TID_CLOCKSOURCE]; @@ -274,7 +283,7 @@ static void davinci_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - t->period = CLOCK_TICK_RATE / (HZ); + t->period = davinci_clock_tick_rate / (HZ); t->opts = TIMER_OPTS_PERIODIC; timer32_config(t); break; @@ -301,21 +310,29 @@ static struct clock_event_device clockevent_davinci = { static void __init davinci_timer_init(void) { + struct clk *timer_clk; + static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; /* init timer hw */ timer_init(); + timer_clk = clk_get(NULL, "timer0"); + BUG_ON(IS_ERR(timer_clk)); + clk_enable(timer_clk); + + davinci_clock_tick_rate = clk_get_rate(timer_clk); + /* setup clocksource */ clocksource_davinci.mult = - clocksource_khz2mult(CLOCK_TICK_RATE/1000, + clocksource_khz2mult(davinci_clock_tick_rate/1000, clocksource_davinci.shift); if (clocksource_register(&clocksource_davinci)) printk(err, clocksource_davinci.name); /* setup clockevent */ - clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, + clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC, clockevent_davinci.shift); clockevent_davinci.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_davinci); @@ -333,42 +350,52 @@ struct sys_timer davinci_timer = { /* reset board using watchdog timer */ void davinci_watchdog_reset(void) { - u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE; + u32 tgcr, wdtcr; + void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE); + struct device dev; + struct clk *wd_clk; + char *name = "watchdog"; + + dev_set_name(&dev, name); + wd_clk = clk_get(&dev, NULL); + if (WARN_ON(IS_ERR(wd_clk))) + return; + clk_enable(wd_clk); /* disable, internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset timer, set mode to 64-bit watchdog, and unreset */ tgcr = 0; - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT; tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); /* clear counter and period regs */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); - davinci_writel(0, base + PRD12); - davinci_writel(0, base + PRD34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); + __raw_writel(0, base + PRD12); + __raw_writel(0, base + PRD34); /* enable */ - wdtcr = davinci_readl(base + WDTCR); + wdtcr = __raw_readl(base + WDTCR); wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in pre-active state */ wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in active state */ wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* write an invalid value to the WDKEY field to trigger * a watchdog reset */ wdtcr = 0x00004000; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); } diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 2429b79f6da..abedb633718 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -14,6 +14,8 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#define DAVINCI_USB_OTG_BASE 0x01C64000 + #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct musb_hdrc_eps_bits musb_eps[] = { { "ep1_tx", 8, }, diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 6d9152de607..ae24486f858 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -100,7 +100,7 @@ static unsigned int last_jiffy_time; #define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ) -static int ep93xx_timer_interrupt(int irq, void *dev_id) +static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) { __raw_writel(1, EP93XX_TIMER1_CLEAR); while ((signed long) diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h index 502d5aa2c09..6c2942f8292 100644 --- a/arch/arm/mach-imx/include/mach/gpio.h +++ b/arch/arm/mach-imx/include/mach/gpio.h @@ -1,6 +1,7 @@ #ifndef _IMX_GPIO_H #include <linux/kernel.h> +#include <mach/hardware.h> #include <mach/imx-regs.h> #define IMX_GPIO_ALLOC_MODE_NORMAL 0 diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index aff0ebcfa84..5aef18b599e 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -73,7 +73,7 @@ static void __init imx_timer_hardware_init(void) IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN; } -cycle_t imx_get_cycles(void) +cycle_t imx_get_cycles(struct clocksource *cs) { return IMX_TCN(TIMER_BASE); } diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index f4656d2ac8a..1e93dfee754 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -401,7 +401,7 @@ void __init ixp4xx_sys_init(void) /* * clocksource */ -cycle_t ixp4xx_get_cycles(void) +cycle_t ixp4xx_get_cycles(struct clocksource *cs) { return *IXP4XX_OSTS; } diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 16dc9ea0839..eeb00240d78 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -23,6 +23,7 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> #include <mach/kirkwood.h> +#include <mach/bridge-regs.h> #include <plat/cache-feroceon-l2.h> #include <plat/ehci-orion.h> #include <plat/mvsdio.h> diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h new file mode 100644 index 00000000000..4f7029f521c --- /dev/null +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -0,0 +1,42 @@ +/* + * arch/arm/mach-kirkwood/include/mach/bridge-regs.h + * + * Mbus-L to Mbus Bridge Registers + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include <mach/kirkwood.h> + +#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_RESET 0x00000002 + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_LOW_OFF 0x0000 +#define IRQ_MASK_LOW_OFF 0x0004 +#define IRQ_CAUSE_HIGH_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) +#define L2_WRITETHROUGH 0x00000010 + +#endif diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S index c0cc5b5c82a..a4a55c199d7 100644 --- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S @@ -6,7 +6,7 @@ * published by the Free Software Foundation. */ -#include <mach/kirkwood.h> +#include <mach/bridge-regs.h> .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S index 83e0cba77b3..8939d36f893 100644 --- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include <mach/kirkwood.h> +#include <mach/bridge-regs.h> .macro disable_fiq .endm diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 38c98685359..b3e13958821 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -44,44 +44,6 @@ #define KIRKWOOD_PCIE_MEM_SIZE SZ_128M /* - * MBUS bridge registers. - */ -#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) -#define CPU_RESET 0x00000002 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_LOW_OFF 0x0000 -#define IRQ_MASK_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) -#define L2_WRITETHROUGH 0x00000010 - -/* - * Supported devices and revisions. - */ -#define MV88F6281_DEV_ID 0x6281 -#define MV88F6281_REV_Z0 0 -#define MV88F6281_REV_A0 2 - -#define MV88F6192_DEV_ID 0x6192 -#define MV88F6192_REV_Z0 0 -#define MV88F6192_REV_A0 2 - -#define MV88F6180_DEV_ID 0x6180 -#define MV88F6180_REV_A0 2 - -/* * Register Map */ #define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000) @@ -99,6 +61,8 @@ #define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) +#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) + #define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) #define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) @@ -119,5 +83,18 @@ #define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) +/* + * Supported devices and revisions. + */ +#define MV88F6281_DEV_ID 0x6281 +#define MV88F6281_REV_Z0 0 +#define MV88F6281_REV_A0 2 + +#define MV88F6192_DEV_ID 0x6192 +#define MV88F6192_REV_Z0 0 +#define MV88F6192_REV_A0 2 + +#define MV88F6180_DEV_ID 0x6180 +#define MV88F6180_REV_A0 2 #endif diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h index 23a1914c1da..7568e95d279 100644 --- a/arch/arm/mach-kirkwood/include/mach/system.h +++ b/arch/arm/mach-kirkwood/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <mach/hardware.h> -#include <mach/kirkwood.h> +#include <mach/bridge-regs.h> static inline void arch_idle(void) { diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 06083b23bb4..28020abf49e 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> +#include <mach/bridge-regs.h> #include <plat/irq.h> #include <asm/gpio.h> #include "common.h" diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c index 0332d8f5c18..b9537c97beb 100644 --- a/arch/arm/mach-loki/addr-map.c +++ b/arch/arm/mach-loki/addr-map.c @@ -38,6 +38,7 @@ /* * CPU Address Decode Windows registers */ +#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) #define CPU_WIN_CTRL(n) BRIDGE_REG(0x000 | ((n) << 4)) #define CPU_WIN_BASE(n) BRIDGE_REG(0x004 | ((n) << 4)) #define CPU_WIN_REMAP_LO(n) BRIDGE_REG(0x008 | ((n) << 4)) diff --git a/arch/arm/mach-loki/include/mach/bridge-regs.h b/arch/arm/mach-loki/include/mach/bridge-regs.h new file mode 100644 index 00000000000..a3fabf70044 --- /dev/null +++ b/arch/arm/mach-loki/include/mach/bridge-regs.h @@ -0,0 +1,33 @@ +/* + * arch/arm/mach-loki/include/mach/bridge-regs.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include <mach/loki.h> + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) + +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR 0x0004 + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_OFF 0x0000 +#define IRQ_MASK_OFF 0x0004 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#endif diff --git a/arch/arm/mach-loki/include/mach/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S index 332af38ec13..bc917ed3a62 100644 --- a/arch/arm/mach-loki/include/mach/entry-macro.S +++ b/arch/arm/mach-loki/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include <mach/loki.h> +#include <mach/bridge-regs.h> .macro disable_fiq .endm diff --git a/arch/arm/mach-loki/include/mach/loki.h b/arch/arm/mach-loki/include/mach/loki.h index c00af6ba557..bfca7c265f4 100644 --- a/arch/arm/mach-loki/include/mach/loki.h +++ b/arch/arm/mach-loki/include/mach/loki.h @@ -58,20 +58,6 @@ #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) #define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR 0x0004 -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_OFF 0x0000 -#define IRQ_MASK_OFF 0x0004 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) #define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000) diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h index c1de36fe9b3..71895199a53 100644 --- a/arch/arm/mach-loki/include/mach/system.h +++ b/arch/arm/mach-loki/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <mach/hardware.h> -#include <mach/loki.h> +#include <mach/bridge-regs.h> static inline void arch_idle(void) { diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c index e1f97338d5b..76b211bfcca 100644 --- a/arch/arm/mach-loki/irq.c +++ b/arch/arm/mach-loki/irq.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> +#include <mach/bridge-regs.h> #include <plat/irq.h> #include "common.h" diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 444d9c0f5ca..4855b8ca510 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -57,12 +57,12 @@ static irqreturn_t msm_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static cycle_t msm_gpt_read(void) +static cycle_t msm_gpt_read(struct clocksource *cs) { return readl(MSM_GPT_BASE + TIMER_COUNT_VAL); } -static cycle_t msm_dgt_read(void) +static cycle_t msm_dgt_read(struct clocksource *cs) { return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT; } diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index a575daaa62d..9ba595083da 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -20,6 +20,7 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> #include <mach/mv78xx0.h> +#include <mach/bridge-regs.h> #include <plat/cache-feroceon-l2.h> #include <plat/ehci-orion.h> #include <plat/orion_nand.h> diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h new file mode 100644 index 00000000000..2d14c4fe294 --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include <mach/mv78xx0.h> + +#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define L2_WRITETHROUGH 0x00020000 + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_ERR_OFF 0x0000 +#define IRQ_CAUSE_LOW_OFF 0x0004 +#define IRQ_CAUSE_HIGH_OFF 0x0008 +#define IRQ_MASK_ERR_OFF 0x000c +#define IRQ_MASK_LOW_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S index fbfb2693ce6..66ae2d29e77 100644 --- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S +++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include <mach/mv78xx0.h> +#include <mach/bridge-regs.h> .macro disable_fiq .endm diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index 582cffc733a..d715b92b090 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -59,37 +59,6 @@ * Core-specific peripheral registers. */ #define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) -#define L2_WRITETHROUGH 0x00020000 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_ERR_OFF 0x0000 -#define IRQ_CAUSE_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0008 -#define IRQ_MASK_ERR_OFF 0x000c -#define IRQ_MASK_LOW_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) - -/* - * Supported devices and revisions. - */ -#define MV78X00_Z0_DEV_ID 0x6381 -#define MV78X00_REV_Z0 1 - -#define MV78100_DEV_ID 0x7810 -#define MV78100_REV_A0 1 - -#define MV78200_DEV_ID 0x7820 -#define MV78200_REV_A0 1 /* * Register Map @@ -135,5 +104,16 @@ #define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000) +/* + * Supported devices and revisions. + */ +#define MV78X00_Z0_DEV_ID 0x6381 +#define MV78X00_REV_Z0 1 + +#define MV78100_DEV_ID 0x7810 +#define MV78100_REV_A0 1 + +#define MV78200_DEV_ID 0x7820 +#define MV78200_REV_A0 1 #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h index 1d6350b22d0..66e7ce4e90b 100644 --- a/arch/arm/mach-mv78xx0/include/mach/system.h +++ b/arch/arm/mach-mv78xx0/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <mach/hardware.h> -#include <mach/mv78xx0.h> +#include <mach/bridge-regs.h> static inline void arch_idle(void) { diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index 30b7e4bcdbc..f289b0ea7dc 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -13,7 +13,7 @@ #include <linux/pci.h> #include <linux/irq.h> #include <asm/gpio.h> -#include <mach/mv78xx0.h> +#include <mach/bridge-regs.h> #include <plat/irq.h> #include "common.h" diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index 7ae229bc1b7..e54057fb855 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -28,9 +28,7 @@ #include <mach/common.h> #include <mach/imx-uart.h> #include <mach/irqs.h> -#ifdef CONFIG_I2C_IMX #include <mach/i2c.h> -#endif #include <mach/iomux.h> #include "devices.h" @@ -114,7 +112,6 @@ static struct platform_device flash_device = { * I2C */ -#ifdef CONFIG_I2C_IMX static int i2c_pins[] = { PA15_PF_I2C_SDA, PA16_PF_I2C_SCL, @@ -157,7 +154,6 @@ static struct i2c_board_info mx1ads_i2c_devices[] = { .platform_data = &pcf857x_data[1], }, }; -#endif /* * Board init @@ -172,12 +168,10 @@ static void __init mx1ads_init(void) mxc_register_device(&flash_device, &mx1ads_flash_data); /* I2C */ -#ifdef CONFIG_I2C_IMX i2c_register_board_info(0, mx1ads_i2c_devices, ARRAY_SIZE(mx1ads_i2c_devices)); mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data); -#endif } static void __init mx1ads_timer_init(void) diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index 2dee5c87614..999d013e06e 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -919,19 +919,19 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0]) _REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1]) _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2]) - _REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0]) + _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0]) _REGISTER_CLOCK(NULL, "csi", csi_clk[0]) _REGISTER_CLOCK(NULL, "usb", usb_clk[0]) _REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0]) _REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1]) - _REGISTER_CLOCK(NULL, "nfc", nfc_clk) + _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) _REGISTER_CLOCK(NULL, "dma", dma_clk[0]) _REGISTER_CLOCK(NULL, "brom", brom_clk) _REGISTER_CLOCK(NULL, "emma", emma_clk[0]) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0]) - _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "gpio", gpio_clk) - _REGISTER_CLOCK(NULL, "i2c", i2c_clk) + _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk) _REGISTER_CLOCK(NULL, "owire", owire_clk) _REGISTER_CLOCK(NULL, "rtc", rtc_clk) diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index d6235583e97..194b8428bba 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -19,6 +19,8 @@ config MACH_MX31ADS config MACH_MX31ADS_WM1133_EV1 bool "Support Wolfson Microelectronics 1133-EV1 module" depends on MACH_MX31ADS + depends on MFD_WM8350_I2C + depends on REGULATOR_WM8350 select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8352_CONFIG_MODE_0 help diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 83e5e8e1276..a6d6efefa6a 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -102,7 +102,7 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static int uart_pins[] = { +static unsigned int uart_pins[] = { MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, MX31_PIN_TXD1__TXD1, @@ -452,6 +452,8 @@ static int mx31_wm8350_init(struct wm8350 *wm8350) wm8350->codec.platform_data = &imx32ads_wm8350_setup; + regulator_has_full_constraints(); + return 0; } diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index c3648eff513..b5227d837b2 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -226,10 +226,10 @@ static void __init mxc_board_init(void) mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire"); mxc_register_device(&mxc_w1_master_device, NULL); - /* SMSC9215 IRQ pin */ + /* LAN9217 IRQ pin */ if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), "pcm037-eth")) - gpio_direction_input(MX31_PIN_GPIO3_1); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); #ifdef CONFIG_I2C_IMX i2c_register_board_info(1, pcm037_i2c_devices, diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c index 6c4283cec6f..5a01e48fd8f 100644 --- a/arch/arm/mach-mx3/qong.c +++ b/arch/arm/mach-mx3/qong.c @@ -251,32 +251,6 @@ static void __init qong_init_fpga(void) } /* - * This structure defines the MX31 memory map. - */ -static struct map_desc qong_io_desc[] __initdata = { - { - .virtual = AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), - .length = AIPS1_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), - .length = AIPS2_SIZE, - .type = MT_DEVICE_NONSHARED - } -}; - -/* - * Set up static virtual mappings. - */ -static void __init qong_map_io(void) -{ - mxc_map_io(); - iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc)); -} - -/* * Board specific initialization. */ static void __init mxc_board_init(void) @@ -305,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = qong_map_io, + .map_io = mxc_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &qong_timer, diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index f201fddb594..82801dbf057 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -104,7 +104,7 @@ static struct irqaction netx_timer_irq = { .handler = netx_timer_interrupt, }; -cycle_t netx_get_cycles(void) +cycle_t netx_get_cycles(struct clocksource *cs) { return readl(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE)); } diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c index 41df6972176..77281260358 100644 --- a/arch/arm/mach-ns9xxx/time-ns9360.c +++ b/arch/arm/mach-ns9xxx/time-ns9360.c @@ -25,7 +25,7 @@ #define TIMER_CLOCKEVENT 1 static u32 latch; -static cycle_t ns9360_clocksource_read(void) +static cycle_t ns9360_clocksource_read(struct clocksource *cs) { return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE)); } diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index 44d4a966bed..46098f54682 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -26,19 +26,13 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } static int mmc_late_init(struct device *dev) { - int ret; - - ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); + int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); if (ret < 0) return ret; @@ -47,7 +41,7 @@ static int mmc_late_init(struct device *dev) return ret; } -static void mmc_shutdown(struct device *dev) +static void mmc_cleanup(struct device *dev) { gpio_free(H2_TPS_GPIO_MMC_PWR_EN); } @@ -60,7 +54,7 @@ static void mmc_shutdown(struct device *dev) static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 1, .init = mmc_late_init, - .shutdown = mmc_shutdown, + .cleanup = mmc_cleanup, .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 0d8a3c195e2..5e8877ce35e 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -26,11 +26,7 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4695965114c..f597968733b 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -39,12 +39,10 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/gpioexpander.h> #include <mach/irqs.h> #include <mach/mux.h> #include <mach/tc.h> #include <mach/nand.h> -#include <mach/irda.h> #include <mach/usb.h> #include <mach/keypad.h> #include <mach/dma.h> @@ -276,104 +274,6 @@ static struct platform_device h3_kp_device = { .resource = h3_kp_resources, }; - -/* Select between the IrDA and aGPS module - */ -static int h3_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x26))) { - printk(KERN_ERR "Error reading from I/O EXPANDER \n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDA */ - if ((err = write_gpio_expa(expa | 0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x27)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x03; - - if (mode & IR_SIRMODE) { - expa |= 0x01; - } else { /* MIR/FIR */ - expa |= 0x03; - } - - if ((err = write_gpio_expa(expa, 0x27)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h3_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h3_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h3_transceiver_mode, - .select_irda = h3_select_irda, - .rx_channel = OMAP_DMA_UART3_RX, - .tx_channel = OMAP_DMA_UART3_TX, - .dest_start = UART3_THR, - .src_start = UART3_RHR, - .tx_trigger = 0, - .rx_trigger = 0, -}; - -static struct resource h3_irda_resources[] = { - [0] = { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 irda_dmamask = 0xffffffff; - -static struct platform_device h3_irda_device = { - .name = "omapirda", - .id = 0, - .dev = { - .platform_data = &h3_irda_data, - .dma_mask = &irda_dmamask, - }, - .num_resources = ARRAY_SIZE(h3_irda_resources), - .resource = h3_irda_resources, -}; - static struct platform_device h3_lcd_device = { .name = "lcd_h3", .id = -1, @@ -395,7 +295,6 @@ static struct platform_device *devices[] __initdata = { &nand_device, &smc91x_device, &intlat_device, - &h3_irda_device, &h3_kp_device, &h3_lcd_device, }; diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 7bc7a3cb9c5..d1ed1365319 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -181,11 +181,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = { static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1); - else - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0); - + gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on); return 0; } diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index dafe4f71d15..336e51dc612 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -590,27 +590,28 @@ static void omap1_init_ext_clk(struct clk * clk) static int omap1_clk_enable(struct clk *clk) { int ret = 0; + if (clk->usecount++ == 0) { - if (likely(clk->parent)) { + if (clk->parent) { ret = omap1_clk_enable(clk->parent); - - if (unlikely(ret != 0)) { - clk->usecount--; - return ret; - } + if (ret) + goto err; if (clk->flags & CLOCK_NO_IDLE_PARENT) omap1_clk_deny_idle(clk->parent); } ret = clk->ops->enable(clk); - - if (unlikely(ret != 0) && clk->parent) { - omap1_clk_disable(clk->parent); - clk->usecount--; + if (ret) { + if (clk->parent) + omap1_clk_disable(clk->parent); + goto err; } } + return ret; +err: + clk->usecount--; return ret; } diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index d040c3f1027..a2d7814896b 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -40,8 +40,8 @@ static void omap1_mcbsp_request(unsigned int id) */ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { if (dsp_use++ == 0) { - api_clk = clk_get(NULL, "api_clk"); - dsp_clk = clk_get(NULL, "dsp_clk"); + api_clk = clk_get(NULL, "api_ck"); + dsp_clk = clk_get(NULL, "dsp_ck"); if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) { clk_enable(api_clk); clk_enable(dsp_clk); diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 495a32c287b..4d56408d3cf 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -198,7 +198,7 @@ static struct irqaction omap_mpu_timer2_irq = { .handler = omap_mpu_timer2_interrupt, }; -static cycle_t mpu_read(void) +static cycle_t mpu_read(struct clocksource *cs) { return ~omap_mpu_timer_read(1); } diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index a0267a9ab46..e7d017cdc43 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -33,10 +33,8 @@ #include <mach/control.h> #include <mach/gpio.h> -#include <mach/gpioexpander.h> #include <mach/mux.h> #include <mach/usb.h> -#include <mach/irda.h> #include <mach/board.h> #include <mach/common.h> #include <mach/keypad.h> @@ -138,98 +136,6 @@ static struct platform_device h4_flash_device = { .resource = &h4_flash_resource, }; -/* Select between the IrDA and aGPS module - */ -static int h4_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x21))) { - printk(KERN_ERR "Error reading from I/O expander\n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDa */ - if ((err = write_gpio_expa(expa | 0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x20)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x01; - - if (!(mode & IR_SIRMODE)) { /* MIR/FIR */ - expa |= 0x01; - } - - if ((err = write_gpio_expa(expa, 0x20)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h4_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h4_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h4_transceiver_mode, - .select_irda = h4_select_irda, - .rx_channel = OMAP24XX_DMA_UART3_RX, - .tx_channel = OMAP24XX_DMA_UART3_TX, - .dest_start = OMAP_UART3_BASE, - .src_start = OMAP_UART3_BASE, - .tx_trigger = OMAP24XX_DMA_UART3_TX, - .rx_trigger = OMAP24XX_DMA_UART3_RX, -}; - -static struct resource h4_irda_resources[] = { - [0] = { - .start = INT_24XX_UART3_IRQ, - .end = INT_24XX_UART3_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device h4_irda_device = { - .name = "omapirda", - .id = -1, - .dev = { - .platform_data = &h4_irda_data, - }, - .num_resources = 1, - .resource = h4_irda_resources, -}; - static struct omap_kp_platform_data h4_kp_data = { .rows = 6, .cols = 7, @@ -255,7 +161,6 @@ static struct platform_device h4_lcd_device = { static struct platform_device *h4_devices[] __initdata = { &h4_flash_device, - &h4_irda_device, &h4_kp_device, &h4_lcd_device, }; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 744740ae1b9..3a7a29d1f9a 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -42,6 +42,7 @@ #include <mach/nand.h> #include <mach/mux.h> #include <mach/usb.h> +#include <mach/timer-gp.h> #include "mmc-twl4030.h" @@ -186,6 +187,9 @@ static void __init omap3_beagle_init_irq(void) { omap2_init_common_hw(NULL); omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 3a0daac6c83..374ff63c3eb 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -15,7 +15,6 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/delay.h> #include <linux/gpio.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 1e839c5a28c..efc59c49341 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -60,12 +60,13 @@ struct omap_clk { }, \ } -#define CK_243X (1 << 0) -#define CK_242X (1 << 1) +#define CK_243X RATE_IN_243X +#define CK_242X RATE_IN_242X static struct omap_clk omap24xx_clks[] = { /* external root sources */ CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), + CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), @@ -711,7 +712,7 @@ int __init omap2_clk_init(void) { struct prcm_config *prcm; struct omap_clk *c; - u32 clkrate, cpu_mask; + u32 clkrate; if (cpu_is_omap242x()) cpu_mask = RATE_IN_242X; @@ -720,21 +721,15 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + clk_init_one(c->lk.clk); + osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); propagate_rate(&osc_ck); sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); propagate_rate(&sys_ck); for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_init_one(c->lk.clk); - - cpu_mask = 0; - if (cpu_is_omap2420()) - cpu_mask |= CK_242X; - if (cpu_is_omap2430()) - cpu_mask |= CK_243X; - - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) if (c->cpu & cpu_mask) { clkdev_add(&c->lk); clk_register(c->lk.clk); diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 33c3e5b1432..88c5acb40fc 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -625,6 +625,14 @@ static struct clk func_32k_ck = { .clkdm_name = "wkup_clkdm", }; +static struct clk secure_32k_ck = { + .name = "secure_32k_ck", + .ops = &clkops_null, + .rate = 32768, + .flags = RATE_FIXED, + .clkdm_name = "wkup_clkdm", +}; + /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", @@ -1790,7 +1798,7 @@ static struct clk gpt12_ick = { static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_omap2_dflt_wait, - .parent = &func_32k_ck, + .parent = &secure_32k_ck, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 70ec10deb65..6763b8f7302 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -2052,7 +2052,7 @@ static struct clk dss_ick = { static struct clk cam_mclk = { .name = "cam_mclk", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &dpll4_m5x2_ck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, @@ -2063,7 +2063,7 @@ static struct clk cam_mclk = { static struct clk cam_ick = { /* Handles both L3 and L4 clocks */ .name = "cam_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), @@ -2074,7 +2074,7 @@ static struct clk cam_ick = { static struct clk csi2_96m_fck = { .name = "csi2_96m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &core_96m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), @@ -2901,7 +2901,6 @@ static struct clk sr_l4_ick = { /* SECURE_32K_FCK clocks */ -/* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index d6b4b2f8722..496983ade97 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -25,7 +25,6 @@ #include <mach/board.h> #include <mach/mux.h> #include <mach/gpio.h> -#include <mach/eac.h> #include <mach/mmc.h> #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) @@ -366,38 +365,6 @@ static void omap_init_mcspi(void) static inline void omap_init_mcspi(void) {} #endif -#ifdef CONFIG_SND_OMAP24XX_EAC - -#define OMAP2_EAC_BASE 0x48090000 - -static struct resource omap2_eac_resources[] = { - { - .start = OMAP2_EAC_BASE, - .end = OMAP2_EAC_BASE + 0x109, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap2_eac_device = { - .name = "omap24xx-eac", - .id = -1, - .num_resources = ARRAY_SIZE(omap2_eac_resources), - .resource = omap2_eac_resources, - .dev = { - .platform_data = NULL, - }, -}; - -void omap_init_eac(struct eac_platform_data *pdata) -{ - omap2_eac_device.dev.platform_data = pdata; - platform_device_register(&omap2_eac_device); -} - -#else -void omap_init_eac(struct eac_platform_data *pdata) {} -#endif - #ifdef CONFIG_OMAP_SHA1_MD5 static struct resource sha1_md5_resources[] = { { diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 9ba20d985dd..998c5c45587 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -73,9 +73,9 @@ static int omap_check_spurious(unsigned int irq) u32 sir, spurious; sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR); - spurious = sir >> 6; + spurious = sir >> 7; - if (spurious > 1) { + if (spurious) { printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush " "posted write for irq %i\n", irq, sir, previous_irq); diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 9fc13a2cc3f..f36aba12090 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -3,6 +3,8 @@ * * OMAP2 GP timer support. * + * Copyright (C) 2009 Nokia Corporation + * * Update to use new clocksource/clockevent layers * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> * Copyright (C) 2007 MontaVista Software, Inc. @@ -36,8 +38,13 @@ #include <asm/mach/time.h> #include <mach/dmtimer.h> +/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ +#define MAX_GPTIMER_ID 12 + static struct omap_dm_timer *gptimer; static struct clock_event_device clockevent_gpt; +static u8 __initdata gptimer_id = 1; +static u8 __initdata inited; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { @@ -95,20 +102,53 @@ static struct clock_event_device clockevent_gpt = { .set_mode = omap2_gp_timer_set_mode, }; +/** + * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents + * @id: GPTIMER to use (1..MAX_GPTIMER_ID) + * + * Define the GPTIMER that the system should use for the tick timer. + * Meant to be called from board-*.c files in the event that GPTIMER1, the + * default, is unsuitable. Returns -EINVAL on error or 0 on success. + */ +int __init omap2_gp_clockevent_set_gptimer(u8 id) +{ + if (id < 1 || id > MAX_GPTIMER_ID) + return -EINVAL; + + BUG_ON(inited); + + gptimer_id = id; + + return 0; +} + static void __init omap2_gp_clockevent_init(void) { u32 tick_rate; + int src; + + inited = 1; - gptimer = omap_dm_timer_request_specific(1); + gptimer = omap_dm_timer_request_specific(gptimer_id); BUG_ON(gptimer == NULL); #if defined(CONFIG_OMAP_32K_TIMER) - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ); + src = OMAP_TIMER_SRC_32_KHZ; #else - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK); + src = OMAP_TIMER_SRC_SYS_CLK; + WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the " + "secure 32KiHz clock source\n"); #endif + + if (gptimer_id != 12) + WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)), + "timer-gp: omap_dm_timer_set_source() failed\n"); + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); + pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", + gptimer_id, tick_rate); + omap2_gp_timer_irq.dev_id = (void *)gptimer; setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); @@ -125,6 +165,8 @@ static void __init omap2_gp_clockevent_init(void) clockevents_register_device(&clockevent_gpt); } +/* Clocksource code */ + #ifdef CONFIG_OMAP_32K_TIMER /* * When 32k-timer is enabled, don't use GPTimer for clocksource @@ -138,7 +180,7 @@ static inline void __init omap2_gp_clocksource_init(void) {} * clocksource */ static struct omap_dm_timer *gpt_clocksource; -static cycle_t clocksource_read_cycles(void) +static cycle_t clocksource_read_cycles(struct clocksource *cs) { return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource); } diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index fc74e913c41..34a56a136ef 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -131,14 +131,14 @@ static struct musb_hdrc_platform_data musb_plat = { .power = 50, /* up to 100 mA */ }; -static u64 musb_dmamask = DMA_32BIT_MASK; +static u64 musb_dmamask = DMA_BIT_MASK(32); static struct platform_device musb_device = { .name = "musb_hdrc", .id = -1, .dev = { .dma_mask = &musb_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &musb_plat, }, .num_resources = ARRAY_SIZE(musb_resources), @@ -146,14 +146,14 @@ static struct platform_device musb_device = { }; #ifdef CONFIG_NOP_USB_XCEIV -static u64 nop_xceiv_dmamask = DMA_32BIT_MASK; +static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32); static struct platform_device nop_xceiv_device = { .name = "nop_usb_xceiv", .id = -1, .dev = { .dma_mask = &nop_xceiv_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = NULL, }, }; diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 15e509013de..8df55f40f4c 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk) unsigned sysclk_ps; int status; - if (!refclk_psec) + if (!refclk_psec || sysclk_ps == 0) return -ENODEV; sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 719957e05d9..c14d1213727 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -57,12 +57,14 @@ /* * Helpers to get DDR bank info */ +#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) #define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3)) #define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3)) /* * CPU Address Decode Windows registers */ +#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) #define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4)) #define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4)) #define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4)) diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h new file mode 100644 index 00000000000..be896e59d3e --- /dev/null +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -0,0 +1,41 @@ +/* + * arch/arm/mach-orion5x/include/mach/bridge-regs.h + * + * Orion CPU Bridge Registers + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include <mach/orion5x.h> + +#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE | 0x100) + +#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104) + +#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108) +#define WDT_RESET 0x0002 + +#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c) + +#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C) + +#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110) +#define WDT_INT_REQ 0x0008 + +#define BRIDGE_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200) + +#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204) + +#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) + +#endif diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S index 4351937035c..d658992e540 100644 --- a/arch/arm/mach-orion5x/include/mach/entry-macro.S +++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include <mach/orion5x.h> +#include <mach/bridge-regs.h> .macro disable_fiq .endm diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 67bda31406d..377a773ae53 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -61,30 +61,10 @@ #define ORION5X_PCI_MEM_SIZE SZ_128M /******************************************************************************* - * Supported Devices & Revisions - ******************************************************************************/ -/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ -#define MV88F5181_DEV_ID 0x5181 -#define MV88F5181_REV_B1 3 -#define MV88F5181L_REV_A0 8 -#define MV88F5181L_REV_A1 9 -/* Orion-NAS (88F5182) */ -#define MV88F5182_DEV_ID 0x5182 -#define MV88F5182_REV_A2 2 -/* Orion-2 (88F5281) */ -#define MV88F5281_DEV_ID 0x5281 -#define MV88F5281_REV_D0 4 -#define MV88F5281_REV_D1 5 -#define MV88F5281_REV_D2 6 -/* Orion-1-90 (88F6183) */ -#define MV88F6183_DEV_ID 0x6183 -#define MV88F6183_REV_B0 3 - -/******************************************************************************* * Orion Registers Map ******************************************************************************/ + #define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) -#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) #define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) #define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) @@ -97,34 +77,25 @@ #define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) #define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) -#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) -#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) #define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) -#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) #define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000) -#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x)) #define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000) #define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000) -#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x)) #define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900) #define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900) -#define ORION5X_XOR_REG(x) (ORION5X_XOR_VIRT_BASE | (x)) #define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000) #define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000) -#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x)) #define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) #define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) -#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x)) #define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) #define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) -#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x)) /******************************************************************************* * Device Bus Registers @@ -142,23 +113,24 @@ #define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0) #define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4) -/*************************************************************************** - * Orion CPU Bridge Registers - **************************************************************************/ -#define CPU_CONF ORION5X_BRIDGE_REG(0x100) -#define CPU_CTRL ORION5X_BRIDGE_REG(0x104) -#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108) -#define WDT_RESET 0x0002 -#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c) -#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C) -#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110) -#define WDT_INT_REQ 0x0008 -#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200) -#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204) - +/******************************************************************************* + * Supported Devices & Revisions + ******************************************************************************/ +/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ +#define MV88F5181_DEV_ID 0x5181 +#define MV88F5181_REV_B1 3 +#define MV88F5181L_REV_A0 8 +#define MV88F5181L_REV_A1 9 +/* Orion-NAS (88F5182) */ +#define MV88F5182_DEV_ID 0x5182 +#define MV88F5182_REV_A2 2 +/* Orion-2 (88F5281) */ +#define MV88F5281_DEV_ID 0x5281 +#define MV88F5281_REV_D0 4 +#define MV88F5281_REV_D1 5 +#define MV88F5281_REV_D2 6 +/* Orion-1-90 (88F6183) */ +#define MV88F6183_DEV_ID 0x6183 +#define MV88F6183_REV_B0 3 #endif diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h index 9b8db1dcfa8..e912490fff2 100644 --- a/arch/arm/mach-orion5x/include/mach/system.h +++ b/arch/arm/mach-orion5x/include/mach/system.h @@ -11,8 +11,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <mach/hardware.h> -#include <mach/orion5x.h> +#include <mach/bridge-regs.h> static inline void arch_idle(void) { diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index e03f7b45cb0..d7512b925a8 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -15,7 +15,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <asm/gpio.h> -#include <mach/orion5x.h> +#include <mach/bridge-regs.h> #include <plat/irq.h> #include "common.h" diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 68acca98e63..41e6d5033d5 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -26,6 +26,7 @@ #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> +#include <mach/bridge-regs.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index d0a785a3b88..36dc5413cc9 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -196,6 +196,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) /***************************************************************************** * PCI controller ****************************************************************************/ +#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) #define PCI_MODE ORION5X_PCI_REG(0xd00) #define PCI_CMD ORION5X_PCI_REG(0xc00) #define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14) diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 96a2006cb59..17d3fbd368a 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -289,12 +289,12 @@ config MACH_LITTLETON config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" select PXA3xx - select PXA930 + select CPU_PXA930 config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx - select PXA930 + select CPU_PXA930 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" @@ -343,6 +343,15 @@ config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM +config MACH_PALMTE2 + bool "Palm Tungsten|E2" + default y + depends on ARCH_PXA_PALM + select PXA25x + help + Say Y here if you intend to run this kernel on a Palm Tungsten|E2 + handheld computer. + config MACH_PALMT5 bool "Palm Tungsten|T5" default y diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index c80e1bac494..682dbf4e14b 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_MACH_E740) += e740.o obj-$(CONFIG_MACH_E750) += e750.o obj-$(CONFIG_MACH_E400) += e400.o obj-$(CONFIG_MACH_E800) += e800.o +obj-$(CONFIG_MACH_PALMTE2) += palmte2.o obj-$(CONFIG_MACH_PALMT5) += palmt5.o obj-$(CONFIG_MACH_PALMTX) += palmtx.o obj-$(CONFIG_MACH_PALMLD) += palmld.o diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index 117b5435f8d..b50ef39eabf 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -121,7 +121,7 @@ static inline void cmx2xx_init_dm9000(void) {} /* UCB1400 touchscreen controller */ #if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) static struct platform_device cmx2xx_ts_device = { - .name = "ucb1400_ts", + .name = "ucb1400_core", .id = -1, }; diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 10c2eaf9323..7c9c34c19ae 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <net/ax88796.h> +#include <linux/interrupt.h> #include <asm/mach-types.h> #include <asm/sizes.h> @@ -32,12 +32,13 @@ #if defined(CONFIG_AX88796) #define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO) + /* * Asix AX88796 Ethernet */ static struct ax_plat_data colibri_asix_platdata = { - .flags = AXFLG_MAC_FROMDEV, - .wordlength = 2 + .flags = 0, /* defined later */ + .wordlength = 2, }; static struct resource colibri_asix_resource[] = { @@ -49,7 +50,7 @@ static struct resource colibri_asix_resource[] = { [1] = { .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -70,8 +71,8 @@ static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = { static void __init colibri_pxa300_init_eth(void) { + colibri_pxa3xx_init_eth(&colibri_asix_platdata); pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config)); - set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING); platform_device_register(&asix_device); } #else diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 55b74a7a615..a18d37b3c5e 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <net/ax88796.h> +#include <linux/interrupt.h> #include <asm/mach-types.h> #include <asm/sizes.h> @@ -38,8 +38,8 @@ * Asix AX88796 Ethernet */ static struct ax_plat_data colibri_asix_platdata = { - .flags = AXFLG_MAC_FROMDEV, - .wordlength = 2 + .flags = 0, /* defined later */ + .wordlength = 2, }; static struct resource colibri_asix_resource[] = { @@ -51,7 +51,7 @@ static struct resource colibri_asix_resource[] = { [1] = { .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -72,8 +72,8 @@ static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = { static void __init colibri_pxa320_init_eth(void) { + colibri_pxa3xx_init_eth(&colibri_asix_platdata); pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config)); - set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING); platform_device_register(&asix_device); } #else diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 12d0afc54aa..ea34e34f8cd 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/etherdevice.h> #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/sizes.h> @@ -28,6 +29,40 @@ #include "generic.h" #include "devices.h" +#if defined(CONFIG_AX88796) +#define ETHER_ADDR_LEN 6 +static u8 ether_mac_addr[ETHER_ADDR_LEN]; + +void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data) +{ + int i; + u64 serial = ((u64) system_serial_high << 32) | system_serial_low; + + /* + * If the bootloader passed in a serial boot tag, which contains a + * valid ethernet MAC, pass it to the interface. Toradex ships the + * modules with their own bootloader which provides a valid MAC + * this way. + */ + + for (i = 0; i < ETHER_ADDR_LEN; i++) { + ether_mac_addr[i] = serial & 0xff; + serial >>= 8; + } + + if (is_valid_ether_addr(ether_mac_addr)) { + plat_data->flags |= AXFLG_MAC_FROMPLATFORM; + plat_data->mac_addr = ether_mac_addr; + printk(KERN_INFO "%s(): taking MAC from serial boot tag\n", + __func__); + } else { + plat_data->flags |= AXFLG_MAC_FROMDEV; + printk(KERN_INFO "%s(): no valid serial boot tag found, " + "taking MAC from device\n", __func__); + } +} +#endif + #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) static int mmc_detect_pin; diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index cdf21dd135b..930e364ccde 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -427,12 +427,22 @@ static struct pxa2xx_spi_master corgi_spi_info = { .num_chipselect = 3, }; +static void corgi_wait_for_hsync(void) +{ + while (gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data corgi_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = CORGI_GPIO_TP_INT, + .wait_for_sync = corgi_wait_for_hsync, }; static void corgi_ads7846_cs(u32 command) diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c index 4a2a2952c37..5a221a49ea4 100644 --- a/arch/arm/mach-pxa/csb701.c +++ b/arch/arm/mach-pxa/csb701.c @@ -5,6 +5,8 @@ #include <linux/input.h> #include <linux/leds.h> +#include <asm/mach-types.h> + static struct gpio_keys_button csb701_buttons[] = { { .code = 0x7, @@ -54,6 +56,9 @@ static struct platform_device *devices[] __initdata = { static int __init csb701_init(void) { + if (!machine_is_csb726()) + return -ENODEV; + return platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c index 07500a04fd8..a36fc17f671 100644 --- a/arch/arm/mach-pxa/e740.c +++ b/arch/arm/mach-pxa/e740.c @@ -29,6 +29,7 @@ #include <mach/udc.h> #include <mach/irda.h> #include <mach/irqs.h> +#include <mach/audio.h> #include "generic.h" #include "eseries.h" @@ -197,6 +198,7 @@ static void __init e740_init(void) eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_udc_info(&e7xx_udc_mach_info); + pxa_set_ac97_info(NULL); e7xx_irda_init(); pxa_set_ficp_info(&e7xx_ficp_platform_data); } diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c index 6126c04e02b..1d00110590e 100644 --- a/arch/arm/mach-pxa/e750.c +++ b/arch/arm/mach-pxa/e750.c @@ -28,6 +28,7 @@ #include <mach/udc.h> #include <mach/irda.h> #include <mach/irqs.h> +#include <mach/audio.h> #include "generic.h" #include "eseries.h" @@ -198,6 +199,7 @@ static void __init e750_init(void) eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_udc_info(&e7xx_udc_mach_info); + pxa_set_ac97_info(NULL); e7xx_irda_init(); pxa_set_ficp_info(&e7xx_ficp_platform_data); } diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c index 74ab09812a7..9866c7b9e78 100644 --- a/arch/arm/mach-pxa/e800.c +++ b/arch/arm/mach-pxa/e800.c @@ -27,6 +27,7 @@ #include <mach/eseries-gpio.h> #include <mach/udc.h> #include <mach/irqs.h> +#include <mach/audio.h> #include "generic.h" #include "eseries.h" @@ -199,6 +200,7 @@ static void __init e800_init(void) eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_udc_info(&e800_udc_mach_info); + pxa_set_ac97_info(NULL); } MACHINE_START(E800, "Toshiba e800") diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 920dfb8d36d..bc0f73fbd4c 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -25,6 +25,7 @@ #include <linux/regulator/machine.h> #include <linux/spi/spi.h> #include <linux/spi/tdo24m.h> +#include <linux/spi/libertas_spi.h> #include <linux/power_supply.h> #include <linux/apm-emulation.h> @@ -62,6 +63,8 @@ #define GPIO93_CAM_RESET (93) #define GPIO41_ETHIRQ (41) #define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) +#define GPIO115_WLAN_PWEN (115) +#define GPIO19_WLAN_STRAP (19) static int mmc_cd; static int nand_rb; @@ -159,8 +162,8 @@ static unsigned long common_pin_config[] = { GPIO57_SSP1_TXD, /* SSP2 */ - GPIO19_SSP2_SCLK, - GPIO14_SSP2_SFRM, + GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */ + GPIO14_GPIO, GPIO89_SSP2_TXD, GPIO88_SSP2_RXD, @@ -640,28 +643,95 @@ static struct pxa2xx_spi_master em_x270_spi_info = { }; static struct pxa2xx_spi_chip em_x270_tdo24m_chip = { - .rx_threshold = 1, - .tx_threshold = 1, + .rx_threshold = 1, + .tx_threshold = 1, + .gpio_cs = -1, }; static struct tdo24m_platform_data em_x270_tdo24m_pdata = { .model = TDO35S, }; +static struct pxa2xx_spi_master em_x270_spi_2_info = { + .num_chipselect = 1, + .enable_dma = 1, +}; + +static struct pxa2xx_spi_chip em_x270_libertas_chip = { + .rx_threshold = 1, + .tx_threshold = 1, + .timeout = 1000, +}; + +static unsigned long em_x270_libertas_pin_config[] = { + /* SSP2 */ + GPIO19_SSP2_SCLK, + GPIO14_GPIO, + GPIO89_SSP2_TXD, + GPIO88_SSP2_RXD, +}; + +static int em_x270_libertas_setup(struct spi_device *spi) +{ + int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN"); + if (err) + return err; + + gpio_direction_output(GPIO19_WLAN_STRAP, 1); + mdelay(100); + + pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config)); + + gpio_direction_output(GPIO115_WLAN_PWEN, 0); + mdelay(100); + gpio_set_value(GPIO115_WLAN_PWEN, 1); + mdelay(100); + + spi->bits_per_word = 16; + spi_setup(spi); + + return 0; +} + +static int em_x270_libertas_teardown(struct spi_device *spi) +{ + gpio_set_value(GPIO115_WLAN_PWEN, 0); + gpio_free(GPIO115_WLAN_PWEN); + + return 0; +} + +struct libertas_spi_platform_data em_x270_libertas_pdata = { + .use_dummy_writes = 1, + .gpio_cs = 14, + .setup = em_x270_libertas_setup, + .teardown = em_x270_libertas_teardown, +}; + static struct spi_board_info em_x270_spi_devices[] __initdata = { { - .modalias = "tdo24m", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - .controller_data = &em_x270_tdo24m_chip, - .platform_data = &em_x270_tdo24m_pdata, + .modalias = "tdo24m", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, + .controller_data = &em_x270_tdo24m_chip, + .platform_data = &em_x270_tdo24m_pdata, + }, + { + .modalias = "libertas_spi", + .max_speed_hz = 13000000, + .bus_num = 2, + .irq = IRQ_GPIO(116), + .chip_select = 0, + .controller_data = &em_x270_libertas_chip, + .platform_data = &em_x270_libertas_pdata, }, }; static void __init em_x270_init_spi(void) { pxa2xx_set_spi_info(1, &em_x270_spi_info); + pxa2xx_set_spi_info(2, &em_x270_spi_2_info); spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices)); } #else diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 3465268ca71..485fede83d9 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -15,6 +15,9 @@ extern struct sys_timer pxa_timer; extern void __init pxa_init_irq(int irq_nr, int (*set_wake)(unsigned int, unsigned int)); extern void __init pxa25x_init_irq(void); +#ifdef CONFIG_CPU_PXA26x +extern void __init pxa26x_init_irq(void); +#endif extern void __init pxa27x_init_irq(void); extern void __init pxa3xx_init_irq(void); extern void __init pxa_map_io(void); diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h index f82f96dd105..16eb02552d5 100644 --- a/arch/arm/mach-pxa/include/mach/audio.h +++ b/arch/arm/mach-pxa/include/mach/audio.h @@ -4,12 +4,22 @@ #include <sound/core.h> #include <sound/pcm.h> +/* + * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95) + * a -1 value means no gpio will be used for reset + + * reset_gpio should only be specified for pxa27x CPUs where a silicon + * bug prevents correct operation of the reset line. If not specified, + * the default behaviour on these CPUs is to consider gpio 113 as the + * AC97 reset line, which is the default on most boards. + */ typedef struct { int (*startup)(struct snd_pcm_substream *, void *); void (*shutdown)(struct snd_pcm_substream *, void *); void (*suspend)(void *); void (*resume)(void *); void *priv; + int reset_gpio; } pxa2xx_audio_ops_t; extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 3f2a01d6a03..a88d7caff0d 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -1,5 +1,8 @@ #ifndef _COLIBRI_H_ #define _COLIBRI_H_ + +#include <net/ax88796.h> + /* * common settings for all modules */ @@ -7,13 +10,17 @@ #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin); #else -static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {} +static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {} #endif #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) extern void colibri_pxa3xx_init_lcd(int bl_pin); #else -static inline void colibri_pxa3xx_init_lcd(int) {} +static inline void colibri_pxa3xx_init_lcd(int bl_pin) {} +#endif + +#if defined(CONFIG_AX88796) +extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data); #endif /* physical memory regions */ diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 82a399f3f9f..20ef37d4a9a 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -27,7 +27,7 @@ #define GPIO22_MAGICIAN_VIBRA_EN 22 #define GPIO26_MAGICIAN_GSM_POWER 26 #define GPIO27_MAGICIAN_USBC_PUEN 27 -#define GPIO30_MAGICIAN_nCHARGE_EN 30 +#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN 30 #define GPIO37_MAGICIAN_KEY_HANGUP 37 #define GPIO38_MAGICIAN_KEY_CONTACTS 38 #define GPIO40_MAGICIAN_GSM_OUT2 40 @@ -98,7 +98,7 @@ #define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) #define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) #define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) -#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5) +#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5) #define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) /* input */ diff --git a/arch/arm/mach-pxa/include/mach/palmasoc.h b/arch/arm/mach-pxa/include/mach/palmasoc.h index 6c4b1f7de20..58afb30d529 100644 --- a/arch/arm/mach-pxa/include/mach/palmasoc.h +++ b/arch/arm/mach-pxa/include/mach/palmasoc.h @@ -1,13 +1,8 @@ #ifndef _INCLUDE_PALMASOC_H_ #define _INCLUDE_PALMASOC_H_ + struct palm27x_asoc_info { int jack_gpio; }; -#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X -void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data); -#else -static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {} -#endif - #endif diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index 7c295a48d78..fb13c82ad6d 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -87,6 +87,7 @@ #define PALMLD_IDE_SIZE 0x00100000 #define PALMLD_PHYS_IO_START 0x40000000 +#define PALMLD_STR_BASE 0xa0200000 /* BATTERY */ #define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index 94db2881f04..d15662aba00 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -37,7 +37,6 @@ /* USB */ #define GPIO_NR_PALMT5_USB_DETECT_N 15 -#define GPIO_NR_PALMT5_USB_POWER 95 #define GPIO_NR_PALMT5_USB_PULLUP 93 /* LCD/BACKLIGHT */ @@ -59,6 +58,7 @@ /* Various addresses */ #define PALMT5_PHYS_RAM_START 0xa0000000 #define PALMT5_PHYS_IO_START 0x40000000 +#define PALMT5_STR_BASE 0xa0200000 /* TOUCHSCREEN */ #define AC97_LINK_FRAME 21 diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h new file mode 100644 index 00000000000..12361341f9d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmte2.h @@ -0,0 +1,68 @@ +/* + * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer + * + * Author: + * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMTE2_H_ +#define _INCLUDE_PALMTE2_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMTE2_POWER_DETECT 9 +#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N 4 +#define GPIO_NR_PALMTE2_EARPHONE_DETECT 15 + +/* SD/MMC */ +#define GPIO_NR_PALMTE2_SD_DETECT_N 10 +#define GPIO_NR_PALMTE2_SD_POWER 55 +#define GPIO_NR_PALMTE2_SD_READONLY 51 + +/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ +#define GPIO_NR_PALMTE2_IR_DISABLE 48 + +/* USB */ +#define GPIO_NR_PALMTE2_USB_DETECT_N 35 +#define GPIO_NR_PALMTE2_USB_PULLUP 53 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMTE2_BL_POWER 56 +#define GPIO_NR_PALMTE2_LCD_POWER 37 + +/* KEYS */ +#define GPIO_NR_PALMTE2_KEY_NOTES 5 +#define GPIO_NR_PALMTE2_KEY_TASKS 7 +#define GPIO_NR_PALMTE2_KEY_CALENDAR 11 +#define GPIO_NR_PALMTE2_KEY_CONTACTS 13 +#define GPIO_NR_PALMTE2_KEY_CENTER 14 +#define GPIO_NR_PALMTE2_KEY_LEFT 19 +#define GPIO_NR_PALMTE2_KEY_RIGHT 20 +#define GPIO_NR_PALMTE2_KEY_DOWN 21 +#define GPIO_NR_PALMTE2_KEY_UP 22 + +/** HERE ARE INIT VALUES **/ + +/* BACKLIGHT */ +#define PALMTE2_MAX_INTENSITY 0xFE +#define PALMTE2_DEFAULT_INTENSITY 0x7E +#define PALMTE2_LIMIT_MASK 0x7F +#define PALMTE2_PRESCALER 0x3F +#define PALMTE2_PERIOD_NS 3500 + +/* BATTERY */ +#define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ +#define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ +#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMTE2_MAX_LIFE_MINS 360 /* on-life in minutes */ + +#endif diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 1e8bccbda51..e74082c872e 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -38,7 +38,6 @@ /* USB */ #define GPIO_NR_PALMTX_USB_DETECT_N 13 -#define GPIO_NR_PALMTX_USB_POWER 95 #define GPIO_NR_PALMTX_USB_PULLUP 93 /* LCD/BACKLIGHT */ @@ -78,6 +77,8 @@ #define PALMTX_PHYS_RAM_START 0xa0000000 #define PALMTX_PHYS_IO_START 0x40000000 +#define PALMTX_STR_BASE 0xa0200000 + #define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */ #define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */ diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index e13f6a81c22..c872b9feb4d 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -334,6 +334,11 @@ static struct led_info littleton_da9034_leds[] = { }, }; +static struct da9034_touch_pdata littleton_da9034_touch = { + .x_inverted = 1, + .interval_ms = 20, +}; + static struct da903x_subdev_info littleton_da9034_subdevs[] = { { .name = "da903x-led", @@ -350,6 +355,10 @@ static struct da903x_subdev_info littleton_da9034_subdevs[] = { }, { .name = "da903x-backlight", .id = DA9034_ID_WLED, + }, { + .name = "da9034-touch", + .id = DA9034_ID_TOUCH, + .platform_data = &littleton_da9034_touch, }, }; diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index deeea1c2782..c899bbd94dc 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -25,6 +25,8 @@ #include <linux/mtd/physmap.h> #include <linux/pda_power.h> #include <linux/pwm_backlight.h> +#include <linux/regulator/bq24022.h> +#include <linux/regulator/machine.h> #include <linux/usb/gpio_vbus.h> #include <mach/hardware.h> @@ -552,33 +554,7 @@ static struct platform_device gpio_vbus = { static int power_supply_init(struct device *dev) { - int ret; - - ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); - if (ret) - goto err_cs_ac; - ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB"); - if (ret) - goto err_cs_usb; - ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN"); - if (ret) - goto err_chg_en; - ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN"); - if (!ret) - ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0); - if (ret) - goto err_nchg_en; - - return 0; - -err_nchg_en: - gpio_free(EGPIO_MAGICIAN_CHARGE_EN); -err_chg_en: - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB); -err_cs_usb: - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); -err_cs_ac: - return ret; + return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); } static int magician_is_ac_online(void) @@ -586,22 +562,8 @@ static int magician_is_ac_online(void) return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC); } -static int magician_is_usb_online(void) -{ - return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_USB); -} - -static void magician_set_charge(int flags) -{ - gpio_set_value(GPIO30_MAGICIAN_nCHARGE_EN, !flags); - gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags); -} - static void power_supply_exit(struct device *dev) { - gpio_free(GPIO30_MAGICIAN_nCHARGE_EN); - gpio_free(EGPIO_MAGICIAN_CHARGE_EN); - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB); gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); } @@ -612,8 +574,6 @@ static char *magician_supplicants[] = { static struct pda_power_pdata power_supply_info = { .init = power_supply_init, .is_ac_online = magician_is_ac_online, - .is_usb_online = magician_is_usb_online, - .set_charge = magician_set_charge, .exit = power_supply_exit, .supplied_to = magician_supplicants, .num_supplicants = ARRAY_SIZE(magician_supplicants), @@ -646,6 +606,43 @@ static struct platform_device power_supply = { .num_resources = ARRAY_SIZE(power_supply_resources), }; +/* + * Battery charger + */ + +static struct regulator_consumer_supply bq24022_consumers[] = { + { + .dev = &gpio_vbus.dev, + .supply = "vbus_draw", + }, + { + .dev = &power_supply.dev, + .supply = "ac_draw", + }, +}; + +static struct regulator_init_data bq24022_init_data = { + .constraints = { + .max_uA = 500000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + }, + .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), + .consumer_supplies = bq24022_consumers, +}; + +static struct bq24022_mach_info bq24022_info = { + .gpio_nce = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, + .gpio_iset2 = EGPIO_MAGICIAN_BQ24022_ISET2, + .init_data = &bq24022_init_data, +}; + +static struct platform_device bq24022 = { + .name = "bq24022", + .id = -1, + .dev = { + .platform_data = &bq24022_info, + }, +}; /* * MMC/SD @@ -756,6 +753,7 @@ static struct platform_device *devices[] __initdata = { &egpio, &backlight, &pasic3, + &bq24022, &gpio_vbus, &power_supply, &strataflash, diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 97c93a7a285..ff8052ce0a0 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -50,6 +50,7 @@ #include <mach/pxa27x-udc.h> #include <mach/i2c.h> #include <mach/camera.h> +#include <mach/audio.h> #include <media/soc_camera.h> #include <mach/mioa701.h> @@ -741,6 +742,10 @@ struct i2c_pxa_platform_data i2c_pdata = { .fast_mode = 1, }; +static pxa2xx_audio_ops_t mioa701_ac97_info = { + .reset_gpio = 95, +}; + /* * Mio global */ @@ -763,8 +768,6 @@ MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight", &pxa27x_device_pwm0.dev, &mioa701_backlight_data); MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info) MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) -MIO_SIMPLE_DEV(pxa2xx_ac97, "pxa2xx-ac97", NULL) -MIO_PARENT_DEV(mio_wm9713_codec, "wm9713-codec", &pxa2xx_ac97.dev, NULL) MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); @@ -774,8 +777,6 @@ static struct platform_device *devices[] __initdata = { &mioa701_backlight, &mioa701_led, &pxa2xx_pcm, - &pxa2xx_ac97, - &mio_wm9713_codec, &mioa701_sound, &power_dev, &strataflash, @@ -818,6 +819,7 @@ static void __init mioa701_machine_init(void) pxa_set_keypad_info(&mioa701_keypad_info); wm97xx_bat_set_pdata(&mioa701_battery_data); pxa_set_udc_info(&mioa701_udc_info); + pxa_set_ac97_info(&mioa701_ac97_info); pm_power_off = mioa701_poweroff; arm_pm_restart = mioa701_restart; platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 8587477a9bb..1cec1806f00 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -24,6 +24,7 @@ #include <linux/gpio.h> #include <linux/wm97xx_batt.h> #include <linux/power_supply.h> +#include <linux/sysdev.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -68,10 +69,10 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO47_FICP_TXD, /* MATRIX KEYPAD */ - GPIO100_KP_MKIN_0, - GPIO101_KP_MKIN_1, - GPIO102_KP_MKIN_2, - GPIO97_KP_MKIN_3, + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -476,10 +477,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { /****************************************************************************** * aSoC audio ******************************************************************************/ -static struct palm27x_asoc_info palm27x_asoc_pdata = { +static struct palm27x_asoc_info palmld_asoc_pdata = { .jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT, }; +static pxa2xx_audio_ops_t palmld_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmld_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmld_asoc_pdata, + }, +}; + /****************************************************************************** * Framebuffer ******************************************************************************/ @@ -507,6 +520,33 @@ static struct pxafb_mach_info palmld_lcd_screen = { }; /****************************************************************************** + * Power management - standby + ******************************************************************************/ +#ifdef CONFIG_PM +static u32 *addr __initdata; +static u32 resume[3] __initdata = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ +}; + +static int __init palmld_pm_init(void) +{ + int i; + + /* this is where the bootloader jumps */ + addr = phys_to_virt(PALMLD_STR_BASE); + + for (i = 0; i < 3; i++) + addr[i] = resume[i]; + + return 0; +} + +device_initcall(palmld_pm_init); +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static struct platform_device *devices[] __initdata = { @@ -516,6 +556,7 @@ static struct platform_device *devices[] __initdata = { &palmld_backlight, &palmld_leds, &power_supply, + &palmld_asoc, }; static struct map_desc palmld_io_desc[] __initdata = { @@ -545,11 +586,10 @@ static void __init palmld_init(void) set_pxa_fb_info(&palmld_lcd_screen); pxa_set_mci_info(&palmld_mci_platform_data); - pxa_set_ac97_info(NULL); + pxa_set_ac97_info(&palmld_ac97_pdata); pxa_set_ficp_info(&palmld_ficp_platform_data); pxa_set_keypad_info(&palmld_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); - palm27x_asoc_set_pdata(&palm27x_asoc_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 9521c7b3349..30662363907 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, /* IrDA */ GPIO40_GPIO, /* ir disable */ @@ -72,13 +73,13 @@ static unsigned long palmt5_pin_config[] __initdata = { /* USB */ GPIO15_GPIO, /* usb detect */ - GPIO95_GPIO, /* usb power */ + GPIO93_GPIO, /* usb power */ /* MATRIX KEYPAD */ - GPIO100_KP_MKIN_0, - GPIO101_KP_MKIN_1, - GPIO102_KP_MKIN_2, - GPIO97_KP_MKIN_3, + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -344,7 +345,7 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = { static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = { .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N, .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_PALMT5_USB_POWER, + .gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP, .gpio_pullup_inverted = 0, }; @@ -419,10 +420,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { /****************************************************************************** * aSoC audio ******************************************************************************/ -static struct palm27x_asoc_info palm27x_asoc_pdata = { +static struct palm27x_asoc_info palmt5_asoc_pdata = { .jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT, }; +static pxa2xx_audio_ops_t palmt5_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmt5_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmt5_asoc_pdata, + }, +}; + /****************************************************************************** * Framebuffer ******************************************************************************/ @@ -450,6 +463,33 @@ static struct pxafb_mach_info palmt5_lcd_screen = { }; /****************************************************************************** + * Power management - standby + ******************************************************************************/ +#ifdef CONFIG_PM +static u32 *addr __initdata; +static u32 resume[3] __initdata = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ +}; + +static int __init palmt5_pm_init(void) +{ + int i; + + /* this is where the bootloader jumps */ + addr = phys_to_virt(PALMT5_STR_BASE); + + for (i = 0; i < 3; i++) + addr[i] = resume[i]; + + return 0; +} + +device_initcall(palmt5_pm_init); +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static struct platform_device *devices[] __initdata = { @@ -458,14 +498,15 @@ static struct platform_device *devices[] __initdata = { #endif &palmt5_backlight, &power_supply, + &palmt5_asoc, }; /* setup udc GPIOs initial state */ static void __init palmt5_udc_init(void) { - if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) { - gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1); - gpio_free(GPIO_NR_PALMT5_USB_POWER); + if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1); + gpio_free(GPIO_NR_PALMT5_USB_PULLUP); } } @@ -476,12 +517,11 @@ static void __init palmt5_init(void) set_pxa_fb_info(&palmt5_lcd_screen); pxa_set_mci_info(&palmt5_mci_platform_data); palmt5_udc_init(); + pxa_set_ac97_info(&palmt5_ac97_pdata); pxa_set_udc_info(&palmt5_udc_info); - pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmt5_ficp_platform_data); pxa_set_keypad_info(&palmt5_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); - palm27x_asoc_set_pdata(&palm27x_asoc_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c new file mode 100644 index 00000000000..43fcf2e8688 --- /dev/null +++ b/arch/arm/mach-pxa/palmte2.c @@ -0,0 +1,466 @@ +/* + * Hardware definitions for Palm Tungsten|E2 + * + * Author: + * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com> + * + * Rewrite for mainline: + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (find more info at www.hackndev.com) + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/pda_power.h> +#include <linux/pwm_backlight.h> +#include <linux/gpio.h> +#include <linux/wm97xx_batt.h> +#include <linux/power_supply.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/audio.h> +#include <mach/palmte2.h> +#include <mach/mmc.h> +#include <mach/pxafb.h> +#include <mach/mfp-pxa25x.h> +#include <mach/irda.h> +#include <mach/udc.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long palmte2_pin_config[] __initdata = { + /* MMC */ + GPIO6_MMC_CLK, + GPIO8_MMC_CS0, + GPIO10_GPIO, /* SD detect */ + GPIO55_GPIO, /* SD power */ + GPIO51_GPIO, /* SD r/o switch */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* USB */ + GPIO15_GPIO, /* usb detect */ + GPIO53_GPIO, /* usb power */ + + /* IrDA */ + GPIO48_GPIO, /* ir disable */ + GPIO46_FICP_RXD, + GPIO47_FICP_TXD, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* GPIO KEYS */ + GPIO5_GPIO, /* notes */ + GPIO7_GPIO, /* tasks */ + GPIO11_GPIO, /* calendar */ + GPIO13_GPIO, /* contacts */ + GPIO14_GPIO, /* center */ + GPIO19_GPIO, /* left */ + GPIO20_GPIO, /* right */ + GPIO21_GPIO, /* down */ + GPIO22_GPIO, /* up */ + + /* MISC */ + GPIO1_RST, /* reset */ + GPIO4_GPIO, /* Hotsync button */ + GPIO9_GPIO, /* power detect */ + GPIO37_GPIO, /* LCD power */ + GPIO56_GPIO, /* Backlight power */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +static int palmte2_mci_init(struct device *dev, + irq_handler_t palmte2_detect_int, void *data) +{ + int err = 0; + + /* Setup an interrupt for detecting card insert/remove events */ + err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ"); + if (err) + goto err; + err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N); + if (err) + goto err2; + err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), + palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "SD/MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", + __func__); + goto err2; + } + + err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER"); + if (err) + goto err3; + err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0); + if (err) + goto err4; + + err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY"); + if (err) + goto err4; + err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY); + if (err) + goto err5; + + printk(KERN_DEBUG "%s: irq registered\n", __func__); + + return 0; + +err5: + gpio_free(GPIO_NR_PALMTE2_SD_READONLY); +err4: + gpio_free(GPIO_NR_PALMTE2_SD_POWER); +err3: + free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data); +err2: + gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N); +err: + return err; +} + +static void palmte2_mci_exit(struct device *dev, void *data) +{ + gpio_free(GPIO_NR_PALMTE2_SD_READONLY); + gpio_free(GPIO_NR_PALMTE2_SD_POWER); + free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data); + gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N); +} + +static void palmte2_mci_power(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd)); +} + +static int palmte2_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY); +} + +static struct pxamci_platform_data palmte2_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .setpower = palmte2_mci_power, + .get_ro = palmte2_mci_get_ro, + .init = palmte2_mci_init, + .exit = palmte2_mci_exit, +}; + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +static struct gpio_keys_button palmte2_pxa_buttons[] = { + {KEY_F1, GPIO_NR_PALMTE2_KEY_CONTACTS, 1, "Contacts" }, + {KEY_F2, GPIO_NR_PALMTE2_KEY_CALENDAR, 1, "Calendar" }, + {KEY_F3, GPIO_NR_PALMTE2_KEY_TASKS, 1, "Tasks" }, + {KEY_F4, GPIO_NR_PALMTE2_KEY_NOTES, 1, "Notes" }, + {KEY_ENTER, GPIO_NR_PALMTE2_KEY_CENTER, 1, "Center" }, + {KEY_LEFT, GPIO_NR_PALMTE2_KEY_LEFT, 1, "Left" }, + {KEY_RIGHT, GPIO_NR_PALMTE2_KEY_RIGHT, 1, "Right" }, + {KEY_DOWN, GPIO_NR_PALMTE2_KEY_DOWN, 1, "Down" }, + {KEY_UP, GPIO_NR_PALMTE2_KEY_UP, 1, "Up" }, +}; + +static struct gpio_keys_platform_data palmte2_pxa_keys_data = { + .buttons = palmte2_pxa_buttons, + .nbuttons = ARRAY_SIZE(palmte2_pxa_buttons), +}; + +static struct platform_device palmte2_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &palmte2_pxa_keys_data, + }, +}; + +/****************************************************************************** + * Backlight + ******************************************************************************/ +static int palmte2_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER"); + if (ret) + goto err; + ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0); + if (ret) + goto err2; + ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0); + if (ret) + goto err3; + + return 0; +err3: + gpio_free(GPIO_NR_PALMTE2_LCD_POWER); +err2: + gpio_free(GPIO_NR_PALMTE2_BL_POWER); +err: + return ret; +} + +static int palmte2_backlight_notify(int brightness) +{ + gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness); + gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness); + return brightness; +} + +static void palmte2_backlight_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTE2_BL_POWER); + gpio_free(GPIO_NR_PALMTE2_LCD_POWER); +} + +static struct platform_pwm_backlight_data palmte2_backlight_data = { + .pwm_id = 0, + .max_brightness = PALMTE2_MAX_INTENSITY, + .dft_brightness = PALMTE2_MAX_INTENSITY, + .pwm_period_ns = PALMTE2_PERIOD_NS, + .init = palmte2_backlight_init, + .notify = palmte2_backlight_notify, + .exit = palmte2_backlight_exit, +}; + +static struct platform_device palmte2_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa25x_device_pwm0.dev, + .platform_data = &palmte2_backlight_data, + }, +}; + +/****************************************************************************** + * IrDA + ******************************************************************************/ +static int palmte2_irda_startup(struct device *dev) +{ + int err; + err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE"); + if (err) + goto err; + err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1); + if (err) + gpio_free(GPIO_NR_PALMTE2_IR_DISABLE); +err: + return err; +} + +static void palmte2_irda_shutdown(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTE2_IR_DISABLE); +} + +static void palmte2_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF); + pxa2xx_transceiver_mode(dev, mode); +} + +static struct pxaficp_platform_data palmte2_ficp_platform_data = { + .startup = palmte2_irda_startup, + .shutdown = palmte2_irda_shutdown, + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = palmte2_irda_transceiver_mode, +}; + +/****************************************************************************** + * UDC + ******************************************************************************/ +static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = { + .gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N, + .gpio_vbus_inverted = 1, + .gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP, + .gpio_pullup_inverted = 0, +}; + +/****************************************************************************** + * Power supply + ******************************************************************************/ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC"); + if (ret) + goto err1; + ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT); + if (ret) + goto err2; + + return 0; + +err2: + gpio_free(GPIO_NR_PALMTE2_POWER_DETECT); +err1: + return ret; +} + +static int palmte2_is_ac_online(void) +{ + return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTE2_POWER_DETECT); +} + +static char *palmte2_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = palmte2_is_ac_online, + .exit = power_supply_exit, + .supplied_to = palmte2_supplicants, + .num_supplicants = ARRAY_SIZE(palmte2_supplicants), +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, +}; + +/****************************************************************************** + * WM97xx battery + ******************************************************************************/ +static struct wm97xx_batt_info wm97xx_batt_pdata = { + .batt_aux = WM97XX_AUX_ID3, + .temp_aux = WM97XX_AUX_ID2, + .charge_gpio = -1, + .max_voltage = PALMTE2_BAT_MAX_VOLTAGE, + .min_voltage = PALMTE2_BAT_MIN_VOLTAGE, + .batt_mult = 1000, + .batt_div = 414, + .temp_mult = 1, + .temp_div = 1, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, + .batt_name = "main-batt", +}; + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +static struct pxafb_mode_info palmte2_lcd_modes[] = { +{ + .pixclock = 77757, + .xres = 320, + .yres = 320, + .bpp = 16, + + .left_margin = 28, + .right_margin = 7, + .upper_margin = 7, + .lower_margin = 5, + + .hsync_len = 4, + .vsync_len = 1, +}, +}; + +static struct pxafb_mach_info palmte2_lcd_screen = { + .modes = palmte2_lcd_modes, + .num_modes = ARRAY_SIZE(palmte2_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static struct platform_device *devices[] __initdata = { +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &palmte2_pxa_keys, +#endif + &palmte2_backlight, + &power_supply, +}; + +/* setup udc GPIOs initial state */ +static void __init palmte2_udc_init(void) +{ + if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1); + gpio_free(GPIO_NR_PALMTE2_USB_PULLUP); + } +} + +static void __init palmte2_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config)); + + set_pxa_fb_info(&palmte2_lcd_screen); + pxa_set_mci_info(&palmte2_mci_platform_data); + palmte2_udc_init(); + pxa_set_udc_info(&palmte2_udc_info); + pxa_set_ac97_info(NULL); + pxa_set_ficp_info(&palmte2_ficp_platform_data); + wm97xx_bat_set_pdata(&wm97xx_batt_pdata); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(PALMTE2, "Palm Tungsten|E2") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .timer = &pxa_timer, + .init_machine = palmte2_init +MACHINE_END diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index b490c092461..e2d44b1a8a9 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -40,6 +40,7 @@ #include <mach/irda.h> #include <mach/pxa27x_keypad.h> #include <mach/udc.h> +#include <mach/palmasoc.h> #include "generic.h" #include "devices.h" @@ -64,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, /* IrDA */ GPIO40_GPIO, /* ir disable */ @@ -75,7 +77,7 @@ static unsigned long palmtx_pin_config[] __initdata = { /* USB */ GPIO13_GPIO, /* usb detect */ - GPIO95_GPIO, /* usb power */ + GPIO93_GPIO, /* usb power */ /* PCMCIA */ GPIO48_nPOE, @@ -93,10 +95,10 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO116_GPIO, /* wifi ready */ /* MATRIX KEYPAD */ - GPIO100_KP_MKIN_0, - GPIO101_KP_MKIN_1, - GPIO102_KP_MKIN_2, - GPIO97_KP_MKIN_3, + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -359,7 +361,7 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = { static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = { .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N, .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_PALMTX_USB_POWER, + .gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP, .gpio_pullup_inverted = 0, }; @@ -433,6 +435,25 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { }; /****************************************************************************** + * aSoC audio + ******************************************************************************/ +static struct palm27x_asoc_info palmtx_asoc_pdata = { + .jack_gpio = GPIO_NR_PALMTX_EARPHONE_DETECT, +}; + +static pxa2xx_audio_ops_t palmtx_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmtx_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmtx_asoc_pdata, + }, +}; + +/****************************************************************************** * Framebuffer ******************************************************************************/ static struct pxafb_mode_info palmtx_lcd_modes[] = { @@ -459,6 +480,33 @@ static struct pxafb_mach_info palmtx_lcd_screen = { }; /****************************************************************************** + * Power management - standby + ******************************************************************************/ +#ifdef CONFIG_PM +static u32 *addr __initdata; +static u32 resume[3] __initdata = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ +}; + +static int __init palmtx_pm_init(void) +{ + int i; + + /* this is where the bootloader jumps */ + addr = phys_to_virt(PALMTX_STR_BASE); + + for (i = 0; i < 3; i++) + addr[i] = resume[i]; + + return 0; +} + +device_initcall(palmtx_pm_init); +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static struct platform_device *devices[] __initdata = { @@ -467,6 +515,7 @@ static struct platform_device *devices[] __initdata = { #endif &palmtx_backlight, &power_supply, + &palmtx_asoc, }; static struct map_desc palmtx_io_desc[] __initdata = { @@ -487,9 +536,9 @@ static void __init palmtx_map_io(void) /* setup udc GPIOs initial state */ static void __init palmtx_udc_init(void) { - if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) { - gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1); - gpio_free(GPIO_NR_PALMTX_USB_POWER); + if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1); + gpio_free(GPIO_NR_PALMTX_USB_PULLUP); } } @@ -501,8 +550,8 @@ static void __init palmtx_init(void) set_pxa_fb_info(&palmtx_lcd_screen); pxa_set_mci_info(&palmtx_mci_platform_data); palmtx_udc_init(); + pxa_set_ac97_info(&palmtx_ac97_pdata); pxa_set_udc_info(&palmtx_udc_info); - pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmtx_ficp_platform_data); pxa_set_keypad_info(&palmtx_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 6112740b4ae..6c12b5a3132 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -377,7 +377,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = { #include <linux/i2c/pca953x.h> static struct pca953x_platform_data pca9536_data = { - .gpio_base = NR_BUILTIN_GPIO + 1, + .gpio_base = NR_BUILTIN_GPIO, }; static int gpio_bus_switch; @@ -405,9 +405,9 @@ static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link) int ret; if (!gpio_bus_switch) { - ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera"); + ret = gpio_request(NR_BUILTIN_GPIO, "camera"); if (!ret) { - gpio_bus_switch = NR_BUILTIN_GPIO + 1; + gpio_bus_switch = NR_BUILTIN_GPIO; gpio_direction_output(gpio_bus_switch, 0); } else gpio_bus_switch = -EINVAL; diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 8c61ddac119..c18e34acafc 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -299,12 +299,22 @@ static struct pxa2xx_spi_master spitz_spi_info = { .num_chipselect = 3, }; +static void spitz_wait_for_hsync(void) +{ + while (gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data spitz_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = SPITZ_GPIO_TP_INT, + .wait_for_sync = spitz_wait_for_hsync, }; static void spitz_ads7846_cs(u32 command) diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 8eb3830fbb0..750c448db67 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -125,7 +125,7 @@ static struct clock_event_device ckevt_pxa_osmr0 = { .set_mode = pxa_osmr0_set_mode, }; -static cycle_t pxa_read_oscr(void) +static cycle_t pxa_read_oscr(struct clocksource *cs) { return OSCR; } diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 6e8ade6ae33..afac5b6d3d7 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -45,6 +45,7 @@ #include <mach/udc.h> #include <mach/tosa_bt.h> #include <mach/pxa2xx_spi.h> +#include <mach/audio.h> #include <asm/mach/arch.h> #include <mach/tosa.h> @@ -914,6 +915,7 @@ static void __init tosa_init(void) pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); pxa_set_i2c_info(NULL); + pxa_set_ac97_info(NULL); platform_scoop_config = &tosa_pcmcia_config; pxa2xx_set_spi_info(2, &pxa_ssp_master_info); diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index c1f73205d07..c256c57642c 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -72,6 +72,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO25_AC97_SDATA_IN_0, GPIO27_AC97_SDATA_OUT, GPIO28_AC97_SYNC, + GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO91_SSP3_SCLK, @@ -126,6 +127,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { /* Standard I2C */ GPIO21_I2C_SCL, GPIO22_I2C_SDA, + + /* GPIO */ + GPIO18_GPIO, /* GPIO Expander #0 INT_N */ + GPIO19_GPIO, /* GPIO Expander #1 INT_N */ }; static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 4e1c488c690..cc5a2283360 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -68,6 +68,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO38_AC97_SYNC, GPIO39_AC97_BITCLK, GPIO40_AC97_nACRESET, + GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO89_SSP3_SCLK, diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 9ab947c14f2..942e1a7eb9b 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -715,7 +715,7 @@ static struct irqaction realview_timer_irq = { .handler = realview_timer_interrupt, }; -static cycle_t realview_get_cycles(void) +static cycle_t realview_get_cycles(struct clocksource *cs) { return ~readl(timer3_va_base + TIMER_VALUE); } diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 332bd3263ea..8f0d37d43b4 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -52,7 +52,6 @@ #include <plat/cpu.h> #include <plat/pm.h> #include <plat/udc.h> -#include <plat/iic.h> static struct map_desc jive_iodesc[] __initdata = { }; @@ -278,7 +277,7 @@ __setup("mtdset=", jive_mtdset); #define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN) #define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN) -struct s3c2410fb_display jive_vgg2432a4_display[] = { +static struct s3c2410fb_display jive_vgg2432a4_display[] = { [0] = { .width = LCD_XRES, .height = LCD_YRES, @@ -311,7 +310,7 @@ struct s3c2410fb_display jive_vgg2432a4_display[] = { #define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2)) #define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2)) -struct s3c2410fb_mach_info jive_lcd_config = { +static struct s3c2410fb_mach_info jive_lcd_config = { .displays = jive_vgg2432a4_display, .num_displays = ARRAY_SIZE(jive_vgg2432a4_display), .default_display = 0, diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index c9cfe40e21f..a7417c479ff 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <asm/cacheflush.h> #include <asm/irq.h> #include <mach/regs-power.h> @@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void) { unsigned long tmp; + flush_cache_all(); + /* set our standby method to sleep */ tmp = __raw_readl(S3C2412_PWRCFG); diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index b05d56e230a..9c6abf9fb54 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -243,7 +243,7 @@ static struct s3c2410_platform_nand anubis_nand_info = { /* IDE channels */ -struct pata_platform_info anubis_ide_platdata = { +static struct pata_platform_info anubis_ide_platdata = { .ioport_shift = 5, }; diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 41a00f57e5d..c8a46685ce3 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -413,7 +413,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = osiris_map_io, - .init_machine = osiris_init, .init_irq = s3c24xx_init_irq, .init_machine = osiris_init, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index baf1c0f1ea5..8199972ed5b 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -40,6 +40,8 @@ #define S3C64XX_PA_FB (0x77100000) #define S3C64XX_PA_SYSCON (0x7E00F000) +#define S3C64XX_PA_IIS0 (0x7F002000) +#define S3C64XX_PA_IIS1 (0x7F003000) #define S3C64XX_PA_TIMER (0x7F006000) #define S3C64XX_PA_IIC0 (0x7F004000) #define S3C64XX_PA_IIC1 (0x7F00F000) diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 25f7935576f..7f473e47e4f 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -166,6 +166,10 @@ static void __init smdk6410_machine_init(void) s3c_i2c1_set_platdata(NULL); s3c_fb_set_platdata(&smdk6410_lcd_pdata); + gpio_request(S3C64XX_GPN(5), "LCD power"); + gpio_request(S3C64XX_GPF(13), "LCD power"); + gpio_request(S3C64XX_GPF(15), "LCD power"); + i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 0cd52692d2f..1f940df0e5a 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -9,6 +9,7 @@ #include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> +#include <asm/page.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 565776680d8..1f929c391af 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -948,7 +948,7 @@ static struct irqaction versatile_timer_irq = { .handler = versatile_timer_interrupt, }; -static cycle_t versatile_get_cycles(void) +static cycle_t versatile_get_cycles(struct clocksource *cs) { return ~readl(TIMER3_VA_BASE + TIMER_VALUE); } diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 2c6c2a7c05a..8f5c13f4c93 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -20,6 +20,31 @@ #define D_CACHE_LINE_SIZE 32 #define BTB_FLUSH_SIZE 8 +#ifdef CONFIG_ARM_ERRATA_411920 +/* + * Invalidate the entire I cache (this code is a workaround for the ARM1136 + * erratum 411920 - Invalidate Instruction Cache operation can fail. This + * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore. + * + * Registers: + * r0 - set to 0 + * r1 - corrupted + */ +ENTRY(v6_icache_inval_all) + mov r0, #0 + mrs r1, cpsr + cpsid ifa @ disable interrupts + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + msr cpsr_cx, r1 @ restore interrupts + .rept 11 @ ARM Ltd recommends at least + nop @ 11 NOPs + .endr + mov pc, lr +#endif + /* * v6_flush_cache_all() * @@ -31,8 +56,12 @@ ENTRY(v6_flush_kern_cache_all) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else + b v6_icache_inval_all +#endif +#else mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate #endif mov pc, lr @@ -103,8 +132,12 @@ ENTRY(v6_coherent_user_range) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c10, 4 @ drain write buffer +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else + b v6_icache_inval_all +#endif +#else mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB #endif mov pc, lr diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 4e283481cee..c07222eb5ce 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -18,6 +18,10 @@ #include "mm.h" +#ifdef CONFIG_ARM_ERRATA_411920 +extern void v6_icache_inval_all(void); +#endif + #ifdef CONFIG_CPU_CACHE_VIPT #define ALIAS_FLUSH_START 0xffff4000 @@ -32,10 +36,15 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) asm( "mcrr p15, 0, %1, %0, c14\n" " mcr p15, 0, %2, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %2, c7, c5, 0\n" +#endif : : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } void flush_cache_mm(struct mm_struct *mm) @@ -48,11 +57,16 @@ void flush_cache_mm(struct mm_struct *mm) if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } @@ -67,11 +81,16 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index b438fc4fb77..e6344ece00c 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -828,6 +828,17 @@ void __init reserve_node_zero(pg_data_t *pgdat) BOOTMEM_DEFAULT); } + if (machine_is_palmld() || machine_is_palmtx()) { + reserve_bootmem_node(pgdat, 0xa0000000, 0x1000, + BOOTMEM_EXCLUSIVE); + reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, + BOOTMEM_EXCLUSIVE); + } + + if (machine_is_palmt5()) + reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, + BOOTMEM_EXCLUSIVE); + #ifdef CONFIG_SA1111 /* * Because of the SA1111 DMA bug, we want to preserve our diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index f0cc599facb..087e239704d 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -10,6 +10,7 @@ * * This is the "shell" of the ARMv6 processor support. */ +#include <linux/init.h> #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> @@ -132,7 +133,7 @@ cpu_v6_name: .asciz "ARMv6-compatible processor" .align - .section ".text.init", #alloc, #execinstr + __INIT /* * __v6_setup diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index d1ebec42521..3397f1e64d7 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -9,6 +9,7 @@ * * This is the "shell" of the ARMv7 processor support. */ +#include <linux/init.h> #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> @@ -95,6 +96,9 @@ ENTRY(cpu_v7_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id orr r0, r0, #TTB_FLAGS +#ifdef CONFIG_ARM_ERRATA_430973 + mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB +#endif mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID isb 1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -153,7 +157,7 @@ cpu_v7_name: .ascii "ARMv7 Processor" .align - .section ".text.init", #alloc, #execinstr + __INIT /* * __v7_setup @@ -180,6 +184,22 @@ __v7_setup: stmia r12, {r0-r5, r7, r9, r11, lr} bl v7_flush_dcache_all ldmia r12, {r0-r5, r7, r9, r11, lr} +#ifdef CONFIG_ARM_ERRATA_430973 + mrc p15, 0, r10, c1, c0, 1 @ read aux control register + orr r10, r10, #(1 << 6) @ set IBE to 1 + mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_458693 + mrc p15, 0, r10, c1, c0, 1 @ read aux control register + orr r10, r10, #(1 << 5) @ set L1NEON to 1 + orr r10, r10, #(1 << 9) @ set PLDNOP to 1 + mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_460075 + mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register + orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit + mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register +#endif mov r10, #0 #ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index 20f84bbaa9b..73d7d89b04c 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -10,6 +10,7 @@ * ARM architecture version 6 TLB handling functions. * These assume a split I/D TLB. */ +#include <linux/init.h> #include <linux/linkage.h> #include <asm/asm-offsets.h> #include <asm/page.h> @@ -87,7 +88,7 @@ ENTRY(v6wbi_flush_kern_tlb_range) mcr p15, 0, r2, c7, c5, 4 @ prefetch flush mov pc, lr - .section ".text.init", #alloc, #execinstr + __INIT .type v6wbi_tlb_fns, #object ENTRY(v6wbi_tlb_fns) diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index 24ba5109f2e..b637e7380ab 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -11,6 +11,7 @@ * ARM architecture version 6 TLB handling functions. * These assume a split I/D TLB. */ +#include <linux/init.h> #include <linux/linkage.h> #include <asm/asm-offsets.h> #include <asm/page.h> @@ -80,7 +81,7 @@ ENTRY(v7wbi_flush_kern_tlb_range) mov pc, lr ENDPROC(v7wbi_flush_kern_tlb_range) - .section ".text.init", #alloc, #execinstr + __INIT .type v7wbi_tlb_fns, #object ENTRY(v7wbi_tlb_fns) diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index e364a5ed10f..77646436c00 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -693,12 +693,15 @@ int imx_dma_request(int channel, const char *name) local_irq_restore(flags); return -EBUSY; } + memset(imxdma, 0, sizeof(imxdma)); + imxdma->name = name; + local_irq_restore(flags); /* request_irq() can block */ #ifdef CONFIG_ARCH_MX2 ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA", NULL); if (ret) { - local_irq_restore(flags); + imxdma->name = NULL; printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n", MXC_INT_DMACH0 + channel, channel); return ret; @@ -708,13 +711,6 @@ int imx_dma_request(int channel, const char *name) imxdma->watchdog.data = channel; #endif - imxdma->name = name; - imxdma->irq_handler = NULL; - imxdma->err_handler = NULL; - imxdma->data = NULL; - imxdma->sg = NULL; - - local_irq_restore(flags); return ret; } EXPORT_SYMBOL(imx_dma_request); @@ -737,10 +733,7 @@ void imx_dma_free(int channel) local_irq_save(flags); /* Disable interrupts */ - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN, - DMA_BASE + DMA_CCR(channel)); + imx_dma_disable(channel); imxdma->name = NULL; #ifdef CONFIG_ARCH_MX2 diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index c6483bad8a2..89e95798cc3 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -124,7 +124,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) irq_stat = __raw_readl(port->base + GPIO_ISR) & __raw_readl(port->base + GPIO_IMR); - BUG_ON(!irq_stat); + mxc_gpio_irq_handler(port, irq_stat); } #endif diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h index 1cac9d1135c..d42f4e6116f 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h @@ -47,7 +47,7 @@ /* * Base address of PBC controller, CS4 */ -#define PBC_BASE_ADDRESS 0xEB000000 +#define PBC_BASE_ADDRESS 0xf4300000 #define PBC_REG_ADDR(offset) (void __force __iomem *) \ (PBC_BASE_ADDRESS + (offset)) diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h index 83fb72c4048..599217b2e13 100644 --- a/arch/arm/plat-mxc/include/mach/imx-uart.h +++ b/arch/arm/plat-mxc/include/mach/imx-uart.h @@ -27,6 +27,4 @@ struct imxuart_platform_data { unsigned int flags; }; -int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata); - #endif diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index ab838cfe94f..57e927a1fd3 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -518,6 +518,8 @@ enum iomux_pins { */ #define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1) #define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_SCLK__RTS3 IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1) #define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC) #define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) #define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) @@ -558,6 +560,16 @@ enum iomux_pins { #define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC) #define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC) #define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC) +#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO) #define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC) #define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC) #define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC) @@ -585,6 +597,42 @@ enum iomux_pins { #define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC) #define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC) #define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_I2C_CLK__SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) +#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 * cspi1_ss1*/ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index c02b8fc2d82..518a36504b8 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -45,7 +45,7 @@ #define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS) -extern void imx_irq_set_priority(unsigned char irq, unsigned char prio); +extern int imx_irq_set_priority(unsigned char irq, unsigned char prio); /* all normal IRQs can be FIQs */ #define FIQ_START 0 diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index e8c4cf56c24..8b070a041a9 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -54,9 +54,6 @@ #define IRAM_BASE_ADDR 0xFFFFE800 /* internal ram */ -/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */ -#define ARCH_NR_GPIOS (6*32 + 16) - /* fixed interrupt numbers */ #define MXC_INT_USBCTRL 58 #define MXC_INT_USBCTRL 58 diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 6e7578a3514..0fb68a531f5 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -50,23 +50,27 @@ #define IIM_PROD_REV_SH 3 #define IIM_PROD_REV_LEN 5 -#ifdef CONFIG_MXC_IRQ_PRIOR -void imx_irq_set_priority(unsigned char irq, unsigned char prio) +int imx_irq_set_priority(unsigned char irq, unsigned char prio) { +#ifdef CONFIG_MXC_IRQ_PRIOR unsigned int temp; unsigned int mask = 0x0F << irq % 8 * 4; - if (irq > 63) - return; + if (irq >= MXC_INTERNAL_IRQS) + return -EINVAL;; temp = __raw_readl(AVIC_NIPRIORITY(irq / 8)); temp &= ~mask; temp |= prio & mask; __raw_writel(temp, AVIC_NIPRIORITY(irq / 8)); + + return 0; +#else + return -ENOSYS; +#endif } EXPORT_SYMBOL(imx_irq_set_priority); -#endif #ifdef CONFIG_FIQ int mxc_set_irq_fiq(unsigned int irq, unsigned int type) diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index ef1b3cd85bd..dab3357196f 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -36,7 +36,7 @@ static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; /* clock source */ -static cycle_t mxc_get_cycles(void) +static cycle_t mxc_get_cycles(struct clocksource *cs) { return __raw_readl(TIMER_BASE + MXC_TCN); } diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 2e0614552ac..29efc279287 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -239,6 +239,13 @@ void recalculate_root_clocks(void) } } +/** + * clk_init_one - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ void clk_init_one(struct clk *clk) { INIT_LIST_HEAD(&clk->children); diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index d1797147732..433021f3d7c 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -185,7 +185,7 @@ console_initcall(omap_add_serial_console); #include <linux/clocksource.h> -static cycle_t omap_32k_read(void) +static cycle_t omap_32k_read(struct clocksource *cs) { return omap_readl(TIMER_32K_SYNCHRONIZED); } @@ -207,7 +207,7 @@ unsigned long long sched_clock(void) { unsigned long long ret; - ret = (unsigned long long)omap_32k_read(); + ret = (unsigned long long)omap_32k_read(&clocksource_32k); ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift; return ret; } diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 21cc0142b97..7fc8c045ad5 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -760,19 +760,12 @@ void omap_free_dma(int lch) { unsigned long flags; - spin_lock_irqsave(&dma_chan_lock, flags); if (dma_chan[lch].dev_id == -1) { pr_err("omap_dma: trying to free unallocated DMA channel %d\n", lch); - spin_unlock_irqrestore(&dma_chan_lock, flags); return; } - dma_chan[lch].dev_id = -1; - dma_chan[lch].next_lch = -1; - dma_chan[lch].callback = NULL; - spin_unlock_irqrestore(&dma_chan_lock, flags); - if (cpu_class_is_omap1()) { /* Disable all DMA interrupts for the channel. */ dma_write(0, CICR(lch)); @@ -798,6 +791,12 @@ void omap_free_dma(int lch) dma_write(0, CCR(lch)); omap_clear_dma(lch); } + + spin_lock_irqsave(&dma_chan_lock, flags); + dma_chan[lch].dev_id = -1; + dma_chan[lch].next_lch = -1; + dma_chan[lch].callback = NULL; + spin_unlock_irqrestore(&dma_chan_lock, flags); } EXPORT_SYMBOL(omap_free_dma); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index bfd47570cc9..55bb9963129 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -238,7 +238,7 @@ static struct omap_dm_timer omap3_dm_timers[] = { { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 }, { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 }, { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 }, - { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 }, + { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ }, }; static const char *omap3_dm_source_names[] __initdata = { @@ -321,11 +321,9 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer) l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ /* - * Enable wake-up only for GPT1 on OMAP2 CPUs. - * FIXME: All timers should have wake-up enabled and clear - * PRCM status. + * Enable wake-up on OMAP2 CPUs. */ - if (cpu_class_is_omap2() && (timer == &dm_timers[0])) + if (cpu_class_is_omap2()) l |= 1 << 2; omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l); @@ -511,7 +509,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop); #ifdef CONFIG_ARCH_OMAP1 -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int n = (timer - dm_timers) << 1; u32 l; @@ -519,23 +517,31 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); l |= source << n; omap_writel(l, MOD_CONF_CTRL_1); + + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); #else -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { + int ret = -EINVAL; + if (source < 0 || source >= 3) - return; + return -EINVAL; clk_disable(timer->fclk); - clk_set_parent(timer->fclk, dm_source_clocks[source]); + ret = clk_set_parent(timer->fclk, dm_source_clocks[source]); clk_enable(timer->fclk); - /* When the functional clock disappears, too quick writes seem to - * cause an abort. */ + /* + * When the functional clock disappears, too quick writes seem + * to cause an abort. XXX Is this still necessary? + */ __delay(150000); + + return ret; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index d3fa41e3d8c..17d7afe42b8 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -758,8 +758,12 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) /* Workaround for clearing DSP GPIO interrupts to allow retention */ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; if (cpu_is_omap24xx() || cpu_is_omap34xx()) - __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2); + __raw_writel(gpio_mask, reg); + + /* Flush posted write for the irq status to avoid spurious interrupts */ + __raw_readl(reg); #endif } @@ -921,13 +925,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) case METHOD_MPUIO: case METHOD_GPIO_1610: spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif @@ -940,13 +941,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) return -EINVAL; } spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h index 6dc70313821..20f1054c0a8 100644 --- a/arch/arm/plat-omap/include/mach/dmtimer.h +++ b/arch/arm/plat-omap/include/mach/dmtimer.h @@ -64,7 +64,7 @@ void omap_dm_timer_trigger(struct omap_dm_timer *timer); void omap_dm_timer_start(struct omap_dm_timer *timer); void omap_dm_timer_stop(struct omap_dm_timer *timer); -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h deleted file mode 100644 index 9e62cf03027..00000000000 --- a/arch/arm/plat-omap/include/mach/eac.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach2/eac.h - * - * Defines for Enhanced Audio Controller - * - * Contact: Jarkko Nikula <jarkko.nikula@nokia.com> - * - * Copyright (C) 2006 Nokia Corporation - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H -#define __ASM_ARM_ARCH_OMAP2_EAC_H - -#include <mach/io.h> -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <sound/core.h> - -/* master codec clock source */ -#define EAC_MCLK_EXT_MASK 0x100 -enum eac_mclk_src { - EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */ - EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK, - EAC_MCLK_EXT_12288000, - EAC_MCLK_EXT_2x11289600, - EAC_MCLK_EXT_2x12288000, -}; - -/* codec port interface mode */ -enum eac_codec_mode { - EAC_CODEC_PCM, - EAC_CODEC_AC97, - EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */ - EAC_CODEC_I2S_SLAVE, -}; - -/* configuration structure for I2S mode */ -struct eac_i2s_conf { - /* if enabled, then first data slot (left channel) is signaled as - * positive level of frame sync EAC.AC_FS */ - unsigned polarity_changed_mode:1; - /* if enabled, then serial data starts one clock cycle after the - * of EAC.AC_FS for first audio slot */ - unsigned sync_delay_enable:1; -}; - -/* configuration structure for EAC codec port */ -struct eac_codec { - enum eac_mclk_src mclk_src; - - enum eac_codec_mode codec_mode; - union { - struct eac_i2s_conf i2s; - } codec_conf; - - int default_rate; /* audio sampling rate */ - - int (* set_power)(void *private_data, int dac, int adc); - int (* register_controls)(void *private_data, - struct snd_card *card); - const char *short_name; - - void *private_data; -}; - -/* structure for passing platform dependent data to the EAC driver */ -struct eac_platform_data { - int (* init)(struct device *eac_dev); - void (* cleanup)(struct device *eac_dev); - /* these callbacks are used to configure & control external MCLK - * source. NULL if not used */ - int (* enable_ext_clocks)(struct device *eac_dev); - void (* disable_ext_clocks)(struct device *eac_dev); -}; - -extern void omap_init_eac(struct eac_platform_data *pdata); - -extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec); -extern void eac_unregister_codec(struct device *eac_dev); - -extern int eac_set_mode(struct device *eac_dev, int play, int rec); - -#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */ diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h deleted file mode 100644 index 90444a0d6b1..00000000000 --- a/arch/arm/plat-omap/include/mach/gpioexpander.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpioexpander.h - * - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H -#define __ASM_ARCH_OMAP_GPIOEXPANDER_H - -/* Function Prototypes for GPIO Expander functions */ - -#ifdef CONFIG_GPIOEXPANDER_OMAP -int read_gpio_expa(u8 *, int); -int write_gpio_expa(u8 , int); -#else -static inline int read_gpio_expa(u8 *val, int addr) -{ - return 0; -} -static inline int write_gpio_expa(u8 val, int addr) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */ diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h index 8372a00d8e0..40f60339d1c 100644 --- a/arch/arm/plat-omap/include/mach/irda.h +++ b/arch/arm/plat-omap/include/mach/irda.h @@ -21,10 +21,6 @@ struct omap_irda_config { int transceiver_cap; int (*transceiver_mode)(struct device *dev, int mode); int (*select_irda)(struct device *dev, int state); - /* Very specific to the needs of some platforms (h3,h4) - * having calls which can sleep in irda_set_speed. - */ - struct delayed_work gpio_expa; int rx_channel; int tx_channel; unsigned long dest_start; diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h index 4435bd434e1..81d5b36534b 100644 --- a/arch/arm/plat-omap/include/mach/mmc.h +++ b/arch/arm/plat-omap/include/mach/mmc.h @@ -79,7 +79,6 @@ struct omap_mmc_platform_data { /* use the internal clock */ unsigned internal_clock:1; - s16 power_pin; int switch_pin; /* gpio (card detect) */ int gpio_wp; /* gpio (write protect) */ diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/mach/timer-gp.h new file mode 100644 index 00000000000..c88d346b59d --- /dev/null +++ b/arch/arm/plat-omap/include/mach/timer-gp.h @@ -0,0 +1,17 @@ +/* + * OMAP2/3 GPTIMER support.headers + * + * Copyright (C) 2009 Nokia Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H + +int __init omap2_gp_clockevent_set_gptimer(u8 id); + +#endif + diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index 6fa2923e6dc..de8a001fc3a 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -16,7 +16,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <asm/mach/time.h> -#include <mach/hardware.h> +#include <mach/bridge-regs.h> /* * Number of timer ticks per jiffy. @@ -41,7 +41,7 @@ static u32 ticks_per_jiffy; /* * Clocksource handling. */ -static cycle_t orion_clksrc_read(void) +static cycle_t orion_clksrc_read(struct clocksource *cs) { return 0xffffffff - readl(TIMER0_VAL); } diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index af819bf21b6..abc79d44aca 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -121,6 +121,8 @@ static int __init pxa_init_gpio_chip(int gpio_end) return -ENOMEM; } + memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip)); + for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { struct gpio_chip *c = &chips[i].chip; @@ -143,6 +145,21 @@ static int __init pxa_init_gpio_chip(int gpio_end) return 0; } +/* Update only those GRERx and GFERx edge detection register bits if those + * bits are set in c->irq_mask + */ +static inline void update_edge_detect(struct pxa_gpio_chip *c) +{ + uint32_t grer, gfer; + + grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask; + gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask; + grer |= c->irq_edge_rise & c->irq_mask; + gfer |= c->irq_edge_fall & c->irq_mask; + __raw_writel(grer, c->regbase + GRER_OFFSET); + __raw_writel(gfer, c->regbase + GFER_OFFSET); +} + static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) { struct pxa_gpio_chip *c; @@ -181,8 +198,7 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) else c->irq_edge_fall &= ~mask; - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio, ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), @@ -244,8 +260,7 @@ static void pxa_unmask_muxed_gpio(unsigned int irq) struct pxa_gpio_chip *c = gpio_to_chip(gpio); c->irq_mask |= GPIO_bit(gpio); - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); } static struct irq_chip pxa_muxed_gpio_chip = { diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c index 7642b975a99..08044dec973 100644 --- a/arch/arm/plat-s3c/gpio-config.c +++ b/arch/arm/plat-s3c/gpio-config.c @@ -13,6 +13,7 @@ */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/gpio.h> #include <linux/io.h> @@ -38,6 +39,7 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) return ret; } +EXPORT_SYMBOL(s3c_gpio_cfgpin); int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) { @@ -56,6 +58,7 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) return ret; } +EXPORT_SYMBOL(s3c_gpio_setpull); #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index 6b1b5231511..26f0cec3ac0 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -34,6 +34,7 @@ extern struct platform_device s3c_device_iis; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_hsmmc0; extern struct platform_device s3c_device_hsmmc1; extern struct platform_device s3c_device_hsmmc2; diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index 9a5c767e0a4..91adfa71c17 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -100,7 +100,7 @@ static void s3c_adc_dbgshow(struct adc_device *adc) readl(adc->regs + S3C2410_ADCDLY)); } -void s3c_adc_try(struct adc_device *adc) +static void s3c_adc_try(struct adc_device *adc) { struct s3c_adc_client *next = adc->ts_pend; @@ -190,6 +190,23 @@ EXPORT_SYMBOL_GPL(s3c_adc_register); void s3c_adc_release(struct s3c_adc_client *client) { /* We should really check that nothing is in progress. */ + if (adc_dev->cur == client) + adc_dev->cur = NULL; + if (adc_dev->ts_pend == client) + adc_dev->ts_pend = NULL; + else { + struct list_head *p, *n; + struct s3c_adc_client *tmp; + + list_for_each_safe(p, n, &adc_pending) { + tmp = list_entry(p, struct s3c_adc_client, pend); + if (tmp == client) + list_del(&tmp->pend); + } + } + + if (adc_dev->cur == NULL) + s3c_adc_try(adc_dev); kfree(client); } EXPORT_SYMBOL_GPL(s3c_adc_release); diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 94a341aaa4e..5c0491bf738 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -19,7 +19,7 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <plat/gpio-core.h> +#include <mach/gpio-core.h> #include <mach/hardware.h> #include <asm/irq.h> |