diff options
Diffstat (limited to 'arch/arm')
134 files changed, 2271 insertions, 855 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index f9da41921c5..940b2017810 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -597,6 +597,8 @@ __common_mmu_cache_on: sub pc, lr, r0, lsr #32 @ properly flush pipeline #endif +#define PROC_ENTRY_SIZE (4*5) + /* * Here follow the relocatable cache support functions for the * various processors. This is a generic hook for locating an @@ -624,7 +626,7 @@ call_cache_fn: adr r12, proc_types ARM( addeq pc, r12, r3 ) @ call cache function THUMB( addeq r12, r3 ) THUMB( moveq pc, r12 ) @ call cache function - add r12, r12, #4*5 + add r12, r12, #PROC_ENTRY_SIZE b 1b /* @@ -691,9 +693,9 @@ proc_types: .word 0x41069260 @ ARM926EJ-S (v5TEJ) .word 0xff0ffff0 - b __arm926ejs_mmu_cache_on - b __armv4_mmu_cache_off - b __armv5tej_mmu_cache_flush + W(b) __arm926ejs_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv5tej_mmu_cache_flush .word 0x00007000 @ ARM7 IDs .word 0x0000f000 @@ -794,6 +796,16 @@ proc_types: .size proc_types, . - proc_types + /* + * If you get a "non-constant expression in ".if" statement" + * error from the assembler on this line, check that you have + * not accidentally written a "b" instruction where you should + * have written W(b). + */ + .if (. - proc_types) % PROC_ENTRY_SIZE != 0 + .error "The size of one or more proc_types entries is wrong." + .endif + /* * Turn off the Cache and MMU. ARMv3 does not support * reading the control register, but ARMv4 does. diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index e5681636626..841df7d21c2 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -255,7 +255,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, if (buf == 0) { dev_err(dev, "%s: unable to map unsafe buffer %p!\n", __func__, ptr); - return 0; + return ~0; } dev_dbg(dev, diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 4ddd0a6ac7f..23564edbd84 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -38,12 +38,6 @@ static DEFINE_SPINLOCK(irq_controller_lock); /* Address of GIC 0 CPU interface */ void __iomem *gic_cpu_base_addr __read_mostly; -struct gic_chip_data { - unsigned int irq_offset; - void __iomem *dist_base; - void __iomem *cpu_base; -}; - /* * Supported arch specific GIC irq extension. * Default make them NULL. diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 889922ad229..67b5abb6f85 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -157,7 +157,7 @@ CONFIG_LEDS_GPIO=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_XFS_FS=m diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig index 316af5479d9..9c0ad799398 100644 --- a/arch/arm/configs/netx_defconfig +++ b/arch/arm/configs/netx_defconfig @@ -60,7 +60,7 @@ CONFIG_FB_ARMCLCD=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 8b0c717378f..1d01ddd3312 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -142,7 +142,7 @@ CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=m CONFIG_RTC_DRV_SA1100=m CONFIG_EXT2_FS=m diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig index 5b550414364..721832ffe2d 100644 --- a/arch/arm/configs/xcep_defconfig +++ b/arch/arm/configs/xcep_defconfig @@ -73,7 +73,7 @@ CONFIG_SENSORS_MAX6650=m # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_SA1100=m CONFIG_DMADEVICES=y # CONFIG_DNOTIFY is not set diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 960f65514d8..59577ad3f4e 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -158,7 +158,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_LEDS_TRIGGER_GPIO=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_ISL1208=m CONFIG_RTC_DRV_PXA=m CONFIG_EXT2_FS=y diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index bc2d2d75f70..65c3f2474f5 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -13,6 +13,9 @@ * Do not include any C declarations in this file - it is included by * assembler source. */ +#ifndef __ASM_ASSEMBLER_H__ +#define __ASM_ASSEMBLER_H__ + #ifndef __ASSEMBLY__ #error "Only include this from assembly code" #endif @@ -290,3 +293,4 @@ .macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort .endm +#endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S index ec0bbf79c71..2da8547de6d 100644 --- a/arch/arm/include/asm/entry-macro-multi.S +++ b/arch/arm/include/asm/entry-macro-multi.S @@ -1,3 +1,5 @@ +#include <asm/assembler.h> + /* * Interrupt handling. Preserves r7, r8, r9 */ diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 0691f9dcc50..435d3f86c70 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -41,6 +41,12 @@ void gic_secondary_init(unsigned int); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); void gic_enable_ppi(unsigned int); + +struct gic_chip_data { + unsigned int irq_offset; + void __iomem *dist_base; + void __iomem *cpu_base; +}; #endif #endif diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index a701e4226a6..0cdd7b456cb 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -76,6 +76,9 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) unsigned long dt_root; const char *model; + if (!dt_phys) + return NULL; + devtree = phys_to_virt(dt_phys); /* check device tree validity */ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index e8d88567680..90c62cd51ca 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -435,6 +435,10 @@ __irq_usr: usr_entry kuser_cmpxchg_check +#ifdef CONFIG_IRQSOFF_TRACER + bl trace_hardirqs_off +#endif + get_thread_info tsk #ifdef CONFIG_PREEMPT ldr r8, [tsk, #TI_PREEMPT] @ get preempt count @@ -453,7 +457,7 @@ __irq_usr: #endif mov why, #0 - b ret_to_user + b ret_to_user_from_irq UNWIND(.fnend ) ENDPROC(__irq_usr) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 1e7b04a40a3..b2a27b6b004 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -64,6 +64,7 @@ work_resched: ENTRY(ret_to_user) ret_slow_syscall: disable_irq @ disable interrupts +ENTRY(ret_to_user_from_irq) ldr r1, [tsk, #TI_FLAGS] tst r1, #_TIF_WORK_MASK bne work_pending @@ -75,6 +76,7 @@ no_work_pending: arch_ret_to_user r1, lr restore_user_regs fast = 0, offset = 0 +ENDPROC(ret_to_user_from_irq) ENDPROC(ret_to_user) /* diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index fee7c36349e..016d6a0830a 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -193,8 +193,17 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, offset -= 0x02000000; offset += sym->st_value - loc; - /* only Thumb addresses allowed (no interworking) */ - if (!(offset & 1) || + /* + * For function symbols, only Thumb addresses are + * allowed (no interworking). + * + * For non-function symbols, the destination + * has no specific ARM/Thumb disposition, so + * the branch is resolved under the assumption + * that interworking is not required. + */ + if ((ELF32_ST_TYPE(sym->st_info) == STT_FUNC && + !(offset & 1)) || offset <= (s32)0xff000000 || offset >= (s32)0x01000000) { pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index d53c0abc4dd..2b5b1421596 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -583,7 +583,7 @@ static int armpmu_event_init(struct perf_event *event) static void armpmu_enable(struct pmu *pmu) { /* Enable all of the perf events on hardware. */ - int idx; + int idx, enabled = 0; struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); if (!armpmu) @@ -596,9 +596,11 @@ static void armpmu_enable(struct pmu *pmu) continue; armpmu->enable(&event->hw, idx); + enabled = 1; } - armpmu->start(); + if (enabled) + armpmu->start(); } static void armpmu_disable(struct pmu *pmu) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index ed11fb08b05..acbb447ac6b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -73,6 +73,7 @@ __setup("fpe=", fpe_setup); #endif extern void paging_init(struct machine_desc *desc); +extern void sanity_check_meminfo(void); extern void reboot_setup(char *str); unsigned int processor_id; @@ -900,6 +901,7 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); + sanity_check_meminfo(); arm_memblock_init(&meminfo, mdesc); paging_init(mdesc); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 344e52b16c8..e7f92a4321f 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -318,9 +318,13 @@ asmlinkage void __cpuinit secondary_start_kernel(void) smp_store_cpu_info(cpu); /* - * OK, now it's safe to let the boot CPU continue + * OK, now it's safe to let the boot CPU continue. Wait for + * the CPU migration code to notice that the CPU is online + * before we continue. */ set_cpu_online(cpu, true); + while (!cpu_active(cpu)) + cpu_relax(); /* * OK, it's off to the idle thread for us diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 60636f499cb..2c277d40cee 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -115,7 +115,7 @@ static void __cpuinit twd_calibrate_rate(void) twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000, - (twd_timer_rate / 1000000) % 100); + (twd_timer_rate / 10000) % 100); } } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index d52eec268b4..6807cb1e76d 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -139,7 +139,7 @@ static void dump_instr(const char *lvl, struct pt_regs *regs) fs = get_fs(); set_fs(KERNEL_DS); - for (i = -4; i < 1; i++) { + for (i = -4; i < 1 + !!thumb; i++) { unsigned int val, bad; if (thumb) @@ -563,7 +563,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) if (!pmd_present(*pmd)) goto bad_access; pte = pte_offset_map_lock(mm, pmd, addr, &ptl); - if (!pte_present(*pte) || !pte_dirty(*pte)) { + if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) { pte_unmap_unlock(pte, ptl); goto bad_access; } diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 17fae4a42ab..f1013d08bb5 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -223,15 +223,15 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index cd850ed6f33..dba0d8d8a4b 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -1220,7 +1220,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91cap9_set_console_clock(portnr); + at91cap9_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index b228ce9e21a..83a1a3fee55 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -199,9 +199,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a0ba475be04..7227755ffec 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1135,7 +1135,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91rm9200_set_console_clock(portnr); + at91rm9200_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 1fdeb9058a7..39f81f47b4b 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -1173,7 +1173,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9260_set_console_clock(portnr); + at91sam9260_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 3eb4538fcee..5004bf0a05f 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -1013,7 +1013,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9261_set_console_clock(portnr); + at91sam9261_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ffe081b77ed..a050f41fc86 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1395,7 +1395,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9263_set_console_clock(portnr); + at91sam9263_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 2bb6ff9af1c..11e214121b2 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -217,11 +217,11 @@ static struct clk *periph_clocks[] __initdata = { static struct clk_lookup periph_clocks_lookups[] = { /* One additional fake clock for ohci */ CLKDEV_CON_ID("ohci_clk", &uhphs_clk), - CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk), - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 05674865bc2..600bffb01ed 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1550,7 +1550,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9g45_set_console_clock(portnr); + at91sam9g45_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 1a40f16b66c..29dff18ed13 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -191,8 +191,8 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index c296045f2b6..aacb19dc922 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -1168,7 +1168,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9rl_set_console_clock(portnr); + at91sam9rl_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 1904fdf8761..cdb65d48325 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -215,7 +215,7 @@ static void __init cap9adk_add_device_nand(void) csa = at91_sys_read(AT91_MATRIX_EBICSA); at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit(); + cap9adk_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (cap9adk_nand_data.bus_width_16) cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index d600dc12322..5c240743c5b 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -214,7 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index f897f84d43d..b60c22b6e24 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -220,7 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 605b26f40a4..9bbdc92ea19 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -221,7 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 7624cf0d006..1325a50101a 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -198,7 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 063c95d0e8f..33eaa135f24 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -178,7 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h index b855ee75f72..8f4866045b4 100644 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -13,13 +13,13 @@ * the 16-31 bit are reserved for at91 generic information * * bit 31: - * 0 => nand 16 bit - * 1 => nand 8 bit + * 0 => nand 8 bit + * 1 => nand 16 bit */ -#define BOARD_HAVE_NAND_8BIT (1 << 31) -static int inline board_have_nand_8bit(void) +#define BOARD_HAVE_NAND_16BIT (1 << 31) +static inline int board_have_nand_16bit(void) { - return system_rev & BOARD_HAVE_NAND_8BIT; + return system_rev & BOARD_HAVE_NAND_16BIT; } #endif /* __ARCH_SYSTEM_REV_H__ */ diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 4e66881c7ae..fc4e98ea754 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -494,7 +494,7 @@ static struct platform_device da850_mcasp_device = { .resource = da850_mcasp_resources, }; -struct platform_device davinci_pcm_device = { +static struct platform_device davinci_pcm_device = { .name = "davinci-pcm-audio", .id = -1, }; diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 8f4f736aa26..806a2f02b98 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -298,7 +298,7 @@ static void davinci_init_wdt(void) /*-------------------------------------------------------------------------*/ -struct platform_device davinci_pcm_device = { +static struct platform_device davinci_pcm_device = { .name = "davinci-pcm-audio", .id = -1, }; diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index a0b838894ac..e7221398e5a 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -252,9 +252,11 @@ static struct irq_chip gpio_irqchip = { static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { - struct davinci_gpio_regs __iomem *g = irq2regs(irq); + struct davinci_gpio_regs __iomem *g; u32 mask = 0xffff; + g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc); + /* we only care about one bank */ if (irq & 1) mask <<= 16; @@ -422,8 +424,7 @@ static int __init davinci_gpio_irq_setup(void) /* set up all irqs in this bank */ irq_set_chained_handler(bank_irq, gpio_irq_handler); - irq_set_chip_data(bank_irq, (__force void *)g); - irq_set_handler_data(bank_irq, (void *)irq); + irq_set_handler_data(bank_irq, (__force void *)g); for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { irq_set_chip(irq, &gpio_irqchip); diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 1d4b65fd673..6659a0d137a 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -251,9 +251,9 @@ static void ep93xx_uart_set_mctrl(struct amba_device *dev, unsigned int mcr; mcr = 0; - if (!(mctrl & TIOCM_RTS)) + if (mctrl & TIOCM_RTS) mcr |= 2; - if (!(mctrl & TIOCM_DTR)) + if (mctrl & TIOCM_DTR) mcr |= 1; __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET); diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 1435fc31c4b..b735705c8b4 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -16,7 +16,8 @@ config CPU_EXYNOS4210 Enable EXYNOS4210 CPU support config EXYNOS4_MCT - bool "Kernel timer support by MCT" + bool + default y help Use MCT (Multi Core Timer) as kernel timers @@ -35,6 +36,11 @@ config EXYNOS4_DEV_SYSMMU help Common setup code for SYSTEM MMU in EXYNOS4 +config EXYNOS4_DEV_DWMCI + bool + help + Compile in platform device definitions for DWMCI + config EXYNOS4_SETUP_I2C1 bool help @@ -127,6 +133,7 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 + select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD select EXYNOS4_DEV_PD select EXYNOS4_DEV_SYSMMU @@ -153,13 +160,20 @@ config MACH_ARMLEX4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CPU_EXYNOS4210 + select S5P_GPIO_INT + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_FIMC3 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 + select S3C_DEV_I2C3 select S3C_DEV_I2C5 select S5P_DEV_ONENAND select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI help @@ -183,6 +197,7 @@ config MACH_NURI select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select SAMSUNG_DEV_PWM + select SAMSUNG_DEV_ADC help Machine support for Samsung Mobile NURI Board. diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index 60fe5ecf359..2a0b68220b2 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -13,19 +13,14 @@ obj- := # Core support for EXYNOS4 system obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o -obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o +obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o pmu.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o -ifeq ($(CONFIG_EXYNOS4_MCT),y) -obj-y += mct.o -else -obj-y += time.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o -endif +obj-$(CONFIG_EXYNOS4_MCT) += mct.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o @@ -43,6 +38,7 @@ obj-y += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o +obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 9babe4473e8..b0370f79ce7 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -16,13 +16,17 @@ #include <asm/proc-fns.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> #include <plat/cpu.h> #include <plat/clock.h> +#include <plat/devs.h> #include <plat/exynos4.h> +#include <plat/adc-core.h> #include <plat/sdhci.h> #include <plat/devs.h> #include <plat/fimc-core.h> +#include <plat/iic-core.h> #include <mach/regs-irq.h> @@ -102,7 +106,17 @@ static struct map_desc exynos4_iodesc[] __initdata = { .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY), .length = SZ_4K, .type = MT_DEVICE, - } + }, { + .virtual = (unsigned long)S5P_VA_GIC_CPU, + .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GIC_DIST, + .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST), + .length = SZ_64K, + .type = MT_DEVICE, + }, }; static void exynos4_idle(void) @@ -128,10 +142,17 @@ void __init exynos4_map_io(void) exynos4_default_sdhci2(); exynos4_default_sdhci3(); + s3c_adc_setname("samsung-adc-v3"); + s3c_fimc_setname(0, "exynos4-fimc"); s3c_fimc_setname(1, "exynos4-fimc"); s3c_fimc_setname(2, "exynos4-fimc"); s3c_fimc_setname(3, "exynos4-fimc"); + + /* The I2C bus controllers are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + s3c_i2c2_setname("s3c2440-i2c"); } void __init exynos4_init_clocks(int xtal) @@ -144,22 +165,23 @@ void __init exynos4_init_clocks(int xtal) exynos4_setup_clocks(); } +static void exynos4_gic_irq_eoi(struct irq_data *d) +{ + struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); + + gic_data->cpu_base = S5P_VA_GIC_CPU + + (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); +} + void __init exynos4_init_irq(void) { int irq; - gic_init(0, IRQ_LOCALTIMER, S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi; for (irq = 0; irq < MAX_COMBINER_NR; irq++) { - /* - * From SPI(0) to SPI(39) and SPI(51), SPI(53) are - * connected to the interrupt combiner. These irqs - * should be initialized to support cascade interrupt. - */ - if ((irq >= 40) && !(irq == 51) && !(irq == 53)) - continue; - combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), COMBINER_IRQ(irq, 0)); combiner_cascade_irq(irq, IRQ_SPI(irq)); diff --git a/arch/arm/mach-exynos4/dev-audio.c b/arch/arm/mach-exynos4/dev-audio.c index 1eed5f9f7bd..5a9f9c2e53b 100644 --- a/arch/arm/mach-exynos4/dev-audio.c +++ b/arch/arm/mach-exynos4/dev-audio.c @@ -21,6 +21,7 @@ #include <mach/map.h> #include <mach/dma.h> #include <mach/irqs.h> +#include <mach/regs-audss.h> static const char *rclksrc[] = { [0] = "busclk", @@ -55,6 +56,7 @@ static struct s3c_audio_pdata i2sv5_pdata = { .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, .src_clk = rclksrc, + .idma_addr = EXYNOS4_AUDSS_INT_MEM, }, }, }; @@ -330,7 +332,7 @@ struct platform_device exynos4_device_ac97 = { static int exynos4_spdif_cfg_gpio(struct platform_device *pdev) { - s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4)); return 0; } diff --git a/arch/arm/mach-exynos4/dev-dwmci.c b/arch/arm/mach-exynos4/dev-dwmci.c new file mode 100644 index 00000000000..b025db4bf60 --- /dev/null +++ b/arch/arm/mach-exynos4/dev-dwmci.c @@ -0,0 +1,82 @@ +/* + * linux/arch/arm/mach-exynos4/dev-dwmci.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Platform device for Synopsys DesignWare Mobile Storage IP + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/mmc/dw_mmc.h> + +#include <plat/devs.h> + +#include <mach/map.h> + +static int exynos4_dwmci_get_bus_wd(u32 slot_id) +{ + return 4; +} + +static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data) +{ + return 0; +} + +static struct resource exynos4_dwmci_resource[] = { + [0] = { + .start = EXYNOS4_PA_DWMCI, + .end = EXYNOS4_PA_DWMCI + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_DWMCI, + .end = IRQ_DWMCI, + .flags = IORESOURCE_IRQ, + } +}; + +static struct dw_mci_board exynos4_dwci_pdata = { + .num_slots = 1, + .quirks = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, + .bus_hz = 80 * 1000 * 1000, + .detect_delay_ms = 200, + .init = exynos4_dwmci_init, + .get_bus_wd = exynos4_dwmci_get_bus_wd, +}; + +static u64 exynos4_dwmci_dmamask = DMA_BIT_MASK(32); + +struct platform_device exynos4_device_dwmci = { + .name = "dw_mmc", + .id = -1, + .num_resources = ARRAY_SIZE(exynos4_dwmci_resource), + .resource = exynos4_dwmci_resource, + .dev = { + .dma_mask = &exynos4_dwmci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &exynos4_dwci_pdata, + }, +}; + +void __init exynos4_dwmci_set_platdata(struct dw_mci_board *pd) +{ + struct dw_mci_board *npd; + + npd = s3c_set_platdata(pd, sizeof(struct dw_mci_board), + &exynos4_device_dwmci); + + if (!npd->init) + npd->init = exynos4_dwmci_init; + if (!npd->get_bus_wd) + npd->get_bus_wd = exynos4_dwmci_get_bus_wd; +} diff --git a/arch/arm/mach-exynos4/headsmp.S b/arch/arm/mach-exynos4/headsmp.S index 6c6cfc50c46..3cdeb364754 100644 --- a/arch/arm/mach-exynos4/headsmp.S +++ b/arch/arm/mach-exynos4/headsmp.S @@ -13,7 +13,7 @@ #include <linux/linkage.h> #include <linux/init.h> - __INIT + __CPUINIT /* * exynos4 specific entry point for secondary CPUs. This provides diff --git a/arch/arm/mach-exynos4/hotplug.c b/arch/arm/mach-exynos4/hotplug.c index 2b5909e2ccd..7490789784c 100644 --- a/arch/arm/mach-exynos4/hotplug.c +++ b/arch/arm/mach-exynos4/hotplug.c @@ -13,9 +13,12 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/smp.h> +#include <linux/io.h> #include <asm/cacheflush.h> +#include <mach/regs-pmu.h> + extern volatile int pen_release; static inline void cpu_enter_lowpower(void) @@ -58,12 +61,12 @@ static inline void cpu_leave_lowpower(void) static inline void platform_do_lowpower(unsigned int cpu, int *spurious) { - /* - * there is no power-control hardware on this platform, so all - * we can do is put the core into WFI; this is safe as the calling - * code will have already disabled interrupts - */ for (;;) { + + /* make cpu1 to be turned off at next WFI command */ + if (cpu == 1) + __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION); + /* * here's the WFI */ diff --git a/arch/arm/mach-exynos4/include/mach/dwmci.h b/arch/arm/mach-exynos4/include/mach/dwmci.h new file mode 100644 index 00000000000..7ce657459cc --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/dwmci.h @@ -0,0 +1,20 @@ +/* linux/arch/arm/mach-exynos4/include/mach/dwmci.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Synopsys DesignWare Mobile Storage for EXYNOS4210 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_ARCH_DWMCI_H +#define __ASM_ARM_ARCH_DWMCI_H __FILE__ + +#include <linux/mmc/dw_mmc.h> + +extern void exynos4_dwmci_set_platdata(struct dw_mci_board *pd); + +#endif /* __ASM_ARM_ARCH_DWMCI_H */ diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S index d8f38c2e565..d7a1e281ce7 100644 --- a/arch/arm/mach-exynos4/include/mach/entry-macro.S +++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S @@ -10,6 +10,7 @@ */ #include <mach/hardware.h> +#include <mach/map.h> #include <asm/hardware/gic.h> .macro disable_fiq @@ -18,6 +19,10 @@ .macro get_irqnr_preamble, base, tmp ldr \base, =gic_cpu_base_addr ldr \base, [\base] + mrc p15, 0, \tmp, c0, c0, 5 + and \tmp, \tmp, #3 + cmp \tmp, #1 + addeq \base, \base, #EXYNOS4_GIC_BANK_OFFSET .endm .macro arch_ret_to_user, tmp1, tmp2 @@ -75,10 +80,4 @@ /* As above, this assumes that irqstat and base are preserved.. */ .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 .endm diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h index 5d037301d21..e2995be40c3 100644 --- a/arch/arm/mach-exynos4/include/mach/irqs.h +++ b/arch/arm/mach-exynos4/include/mach/irqs.h @@ -19,40 +19,105 @@ #define IRQ_PPI(x) S5P_IRQ(x+16) -#define IRQ_LOCALTIMER IRQ_PPI(13) - /* SPI: Shared Peripheral Interrupt */ #define IRQ_SPI(x) S5P_IRQ(x+32) -#define IRQ_MCT1 IRQ_SPI(35) - -#define IRQ_EINT0 IRQ_SPI(40) -#define IRQ_EINT1 IRQ_SPI(41) -#define IRQ_EINT2 IRQ_SPI(42) -#define IRQ_EINT3 IRQ_SPI(43) -#define IRQ_USB_HSOTG IRQ_SPI(44) -#define IRQ_USB_HOST IRQ_SPI(45) -#define IRQ_MODEM_IF IRQ_SPI(46) -#define IRQ_ROTATOR IRQ_SPI(47) -#define IRQ_JPEG IRQ_SPI(48) -#define IRQ_2D IRQ_SPI(49) -#define IRQ_PCIE IRQ_SPI(50) -#define IRQ_MCT0 IRQ_SPI(51) -#define IRQ_MFC IRQ_SPI(52) -#define IRQ_AUDIO_SS IRQ_SPI(54) -#define IRQ_AC97 IRQ_SPI(55) -#define IRQ_SPDIF IRQ_SPI(56) -#define IRQ_KEYPAD IRQ_SPI(57) -#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(58) -#define IRQ_SLIMBUS IRQ_SPI(59) -#define IRQ_PMU IRQ_SPI(60) -#define IRQ_TSI IRQ_SPI(61) -#define IRQ_SATA IRQ_SPI(62) -#define IRQ_GPS IRQ_SPI(63) +#define IRQ_EINT0 IRQ_SPI(16) +#define IRQ_EINT1 IRQ_SPI(17) +#define IRQ_EINT2 IRQ_SPI(18) +#define IRQ_EINT3 IRQ_SPI(19) +#define IRQ_EINT4 IRQ_SPI(20) +#define IRQ_EINT5 IRQ_SPI(21) +#define IRQ_EINT6 IRQ_SPI(22) +#define IRQ_EINT7 IRQ_SPI(23) +#define IRQ_EINT8 IRQ_SPI(24) +#define IRQ_EINT9 IRQ_SPI(25) +#define IRQ_EINT10 IRQ_SPI(26) +#define IRQ_EINT11 IRQ_SPI(27) +#define IRQ_EINT12 IRQ_SPI(28) +#define IRQ_EINT13 IRQ_SPI(29) +#define IRQ_EINT14 IRQ_SPI(30) +#define IRQ_EINT15 IRQ_SPI(31) +#define IRQ_EINT16_31 IRQ_SPI(32) + +#define IRQ_PDMA0 IRQ_SPI(35) +#define IRQ_PDMA1 IRQ_SPI(36) +#define IRQ_TIMER0_VIC IRQ_SPI(37) +#define IRQ_TIMER1_VIC IRQ_SPI(38) +#define IRQ_TIMER2_VIC IRQ_SPI(39) +#define IRQ_TIMER3_VIC IRQ_SPI(40) +#define IRQ_TIMER4_VIC IRQ_SPI(41) +#define IRQ_MCT_L0 IRQ_SPI(42) +#define IRQ_WDT IRQ_SPI(43) +#define IRQ_RTC_ALARM IRQ_SPI(44) +#define IRQ_RTC_TIC IRQ_SPI(45) +#define IRQ_GPIO_XB IRQ_SPI(46) +#define IRQ_GPIO_XA IRQ_SPI(47) +#define IRQ_MCT_L1 IRQ_SPI(48) + +#define IRQ_UART0 IRQ_SPI(52) +#define IRQ_UART1 IRQ_SPI(53) +#define IRQ_UART2 IRQ_SPI(54) +#define IRQ_UART3 IRQ_SPI(55) +#define IRQ_UART4 IRQ_SPI(56) +#define IRQ_MCT_G0 IRQ_SPI(57) +#define IRQ_IIC IRQ_SPI(58) +#define IRQ_IIC1 IRQ_SPI(59) +#define IRQ_IIC2 IRQ_SPI(60) +#define IRQ_IIC3 IRQ_SPI(61) +#define IRQ_IIC4 IRQ_SPI(62) +#define IRQ_IIC5 IRQ_SPI(63) +#define IRQ_IIC6 IRQ_SPI(64) +#define IRQ_IIC7 IRQ_SPI(65) + +#define IRQ_USB_HOST IRQ_SPI(70) +#define IRQ_USB_HSOTG IRQ_SPI(71) +#define IRQ_MODEM_IF IRQ_SPI(72) +#define IRQ_HSMMC0 IRQ_SPI(73) +#define IRQ_HSMMC1 IRQ_SPI(74) +#define IRQ_HSMMC2 IRQ_SPI(75) +#define IRQ_HSMMC3 IRQ_SPI(76) +#define IRQ_DWMCI IRQ_SPI(77) + +#define IRQ_MIPICSI0 IRQ_SPI(78) + +#define IRQ_MIPICSI1 IRQ_SPI(80) + +#define IRQ_ONENAND_AUDI IRQ_SPI(82) +#define IRQ_ROTATOR IRQ_SPI(83) +#define IRQ_FIMC0 IRQ_SPI(84) +#define IRQ_FIMC1 IRQ_SPI(85) +#define IRQ_FIMC2 IRQ_SPI(86) +#define IRQ_FIMC3 IRQ_SPI(87) +#define IRQ_JPEG IRQ_SPI(88) +#define IRQ_2D IRQ_SPI(89) +#define IRQ_PCIE IRQ_SPI(90) + +#define IRQ_MFC IRQ_SPI(94) + +#define IRQ_AUDIO_SS IRQ_SPI(96) +#define IRQ_I2S0 IRQ_SPI(97) +#define IRQ_I2S1 IRQ_SPI(98) +#define IRQ_I2S2 IRQ_SPI(99) +#define IRQ_AC97 IRQ_SPI(100) + +#define IRQ_SPDIF IRQ_SPI(104) +#define IRQ_ADC0 IRQ_SPI(105) +#define IRQ_PEN0 IRQ_SPI(106) +#define IRQ_ADC1 IRQ_SPI(107) +#define IRQ_PEN1 IRQ_SPI(108) +#define IRQ_KEYPAD IRQ_SPI(109) +#define IRQ_PMU IRQ_SPI(110) +#define IRQ_GPS IRQ_SPI(111) +#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) +#define IRQ_SLIMBUS IRQ_SPI(113) + +#define IRQ_TSI IRQ_SPI(115) +#define IRQ_SATA IRQ_SPI(116) #define MAX_IRQ_IN_COMBINER 8 -#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64)) +#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128)) #define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y) #define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0) @@ -73,75 +138,10 @@ #define IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6) #define IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7) -#define IRQ_PDMA0 COMBINER_IRQ(21, 0) -#define IRQ_PDMA1 COMBINER_IRQ(21, 1) - -#define IRQ_TIMER0_VIC COMBINER_IRQ(22, 0) -#define IRQ_TIMER1_VIC COMBINER_IRQ(22, 1) -#define IRQ_TIMER2_VIC COMBINER_IRQ(22, 2) -#define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3) -#define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4) - -#define IRQ_RTC_ALARM COMBINER_IRQ(23, 0) -#define IRQ_RTC_TIC COMBINER_IRQ(23, 1) - -#define IRQ_GPIO_XB COMBINER_IRQ(24, 0) -#define IRQ_GPIO_XA COMBINER_IRQ(24, 1) - -#define IRQ_UART0 COMBINER_IRQ(26, 0) -#define IRQ_UART1 COMBINER_IRQ(26, 1) -#define IRQ_UART2 COMBINER_IRQ(26, 2) -#define IRQ_UART3 COMBINER_IRQ(26, 3) -#define IRQ_UART4 COMBINER_IRQ(26, 4) - -#define IRQ_IIC COMBINER_IRQ(27, 0) -#define IRQ_IIC1 COMBINER_IRQ(27, 1) -#define IRQ_IIC2 COMBINER_IRQ(27, 2) -#define IRQ_IIC3 COMBINER_IRQ(27, 3) -#define IRQ_IIC4 COMBINER_IRQ(27, 4) -#define IRQ_IIC5 COMBINER_IRQ(27, 5) -#define IRQ_IIC6 COMBINER_IRQ(27, 6) -#define IRQ_IIC7 COMBINER_IRQ(27, 7) - -#define IRQ_HSMMC0 COMBINER_IRQ(29, 0) -#define IRQ_HSMMC1 COMBINER_IRQ(29, 1) -#define IRQ_HSMMC2 COMBINER_IRQ(29, 2) -#define IRQ_HSMMC3 COMBINER_IRQ(29, 3) - -#define IRQ_MIPI_CSIS0 COMBINER_IRQ(30, 0) -#define IRQ_MIPI_CSIS1 COMBINER_IRQ(30, 1) - -#define IRQ_FIMC0 COMBINER_IRQ(32, 0) -#define IRQ_FIMC1 COMBINER_IRQ(32, 1) -#define IRQ_FIMC2 COMBINER_IRQ(33, 0) -#define IRQ_FIMC3 COMBINER_IRQ(33, 1) - -#define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0) - -#define IRQ_MCT_L1 COMBINER_IRQ(35, 3) - -#define IRQ_EINT4 COMBINER_IRQ(37, 0) -#define IRQ_EINT5 COMBINER_IRQ(37, 1) -#define IRQ_EINT6 COMBINER_IRQ(37, 2) -#define IRQ_EINT7 COMBINER_IRQ(37, 3) -#define IRQ_EINT8 COMBINER_IRQ(38, 0) - -#define IRQ_EINT9 COMBINER_IRQ(38, 1) -#define IRQ_EINT10 COMBINER_IRQ(38, 2) -#define IRQ_EINT11 COMBINER_IRQ(38, 3) -#define IRQ_EINT12 COMBINER_IRQ(38, 4) -#define IRQ_EINT13 COMBINER_IRQ(38, 5) -#define IRQ_EINT14 COMBINER_IRQ(38, 6) -#define IRQ_EINT15 COMBINER_IRQ(38, 7) - -#define IRQ_EINT16_31 COMBINER_IRQ(39, 0) - -#define IRQ_MCT_L0 COMBINER_IRQ(51, 0) - -#define IRQ_WDT COMBINER_IRQ(53, 0) -#define IRQ_MCT_G0 COMBINER_IRQ(53, 4) +#define MAX_COMBINER_NR 16 -#define MAX_COMBINER_NR 54 +#define IRQ_ADC IRQ_ADC0 +#define IRQ_TC IRQ_PEN0 #define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0) @@ -155,6 +155,6 @@ #define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT) /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_GPIO_END) +#define NR_IRQS (IRQ_GPIO_END + 64) #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h index 0009e77a05f..0aa77fb707d 100644 --- a/arch/arm/mach-exynos4/include/mach/map.h +++ b/arch/arm/mach-exynos4/include/mach/map.h @@ -57,12 +57,14 @@ #define EXYNOS4_PA_DMC0 0x10400000 -#define EXYNOS4_PA_COMBINER 0x10448000 +#define EXYNOS4_PA_COMBINER 0x10440000 + +#define EXYNOS4_PA_GIC_CPU 0x10480000 +#define EXYNOS4_PA_GIC_DIST 0x10490000 +#define EXYNOS4_GIC_BANK_OFFSET 0x8000 #define EXYNOS4_PA_COREPERI 0x10500000 -#define EXYNOS4_PA_GIC_CPU 0x10500100 #define EXYNOS4_PA_TWD 0x10500600 -#define EXYNOS4_PA_GIC_DIST 0x10501000 #define EXYNOS4_PA_L2CC 0x10502000 #define EXYNOS4_PA_MDMA 0x10810000 @@ -94,6 +96,7 @@ #define EXYNOS4_PA_MIPI_CSIS1 0x11890000 #define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) +#define EXYNOS4_PA_DWMCI 0x12550000 #define EXYNOS4_PA_SATA 0x12560000 #define EXYNOS4_PA_SATAPHY 0x125D0000 @@ -108,6 +111,9 @@ #define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) +#define EXYNOS4_PA_ADC 0x13910000 +#define EXYNOS4_PA_ADC1 0x13911000 + #define EXYNOS4_PA_AC97 0x139A0000 #define EXYNOS4_PA_SPDIF 0x139B0000 @@ -130,6 +136,8 @@ #define S3C_PA_IIC5 EXYNOS4_PA_IIC(5) #define S3C_PA_IIC6 EXYNOS4_PA_IIC(6) #define S3C_PA_IIC7 EXYNOS4_PA_IIC(7) +#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC +#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1 #define S3C_PA_RTC EXYNOS4_PA_RTC #define S3C_PA_WDT EXYNOS4_PA_WATCHDOG diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos4/include/mach/pm-core.h index f26e46bc06c..1df3b81f96e 100644 --- a/arch/arm/mach-exynos4/include/mach/pm-core.h +++ b/arch/arm/mach-exynos4/include/mach/pm-core.h @@ -47,3 +47,13 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, { /* nothing here yet */ } + +static inline void s3c_pm_restored_gpios(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_saved_gpios(void) +{ + /* nothing here yet */ +} diff --git a/arch/arm/mach-exynos4/include/mach/pmu.h b/arch/arm/mach-exynos4/include/mach/pmu.h new file mode 100644 index 00000000000..a952904b010 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/pmu.h @@ -0,0 +1,25 @@ +/* linux/arch/arm/mach-exynos4/include/mach/pmu.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS4210 - PMU(Power Management Unit) support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_PMU_H +#define __ASM_ARCH_PMU_H __FILE__ + +enum sys_powerdown { + SYS_AFTR, + SYS_LPA, + SYS_SLEEP, + NUM_SYS_POWERDOWN, +}; + +extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode); + +#endif /* __ASM_ARCH_PMU_H */ diff --git a/arch/arm/mach-exynos4/include/mach/regs-audss.h b/arch/arm/mach-exynos4/include/mach/regs-audss.h new file mode 100644 index 00000000000..ca5a8b64218 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-audss.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-exynos4/include/mach/regs-audss.h + * + * Copyright (c) 2011 Samsung Electronics + * http://www.samsung.com + * + * Exynos4 Audio SubSystem clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_REGS_AUDSS_H +#define __PLAT_REGS_AUDSS_H __FILE__ + +#define EXYNOS4_AUDSS_INT_MEM (0x03000000) + +#endif /* _PLAT_REGS_AUDSS_H */ diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h index 6e311c1157f..d493fdb422f 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h @@ -25,6 +25,9 @@ #define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600) #define S5P_CLKGATE_IP_RIGHTBUS S5P_CLKREG(0x08800) +#define S5P_EPLL_LOCK S5P_CLKREG(0x0C010) +#define S5P_VPLL_LOCK S5P_CLKREG(0x0C020) + #define S5P_EPLL_CON0 S5P_CLKREG(0x0C110) #define S5P_EPLL_CON1 S5P_CLKREG(0x0C114) #define S5P_VPLL_CON0 S5P_CLKREG(0x0C120) @@ -33,7 +36,9 @@ #define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210) #define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214) #define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220) +#define S5P_CLKSRC_TV S5P_CLKREG(0x0C224) #define S5P_CLKSRC_MFC S5P_CLKREG(0x0C228) +#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C) #define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) #define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) #define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) @@ -61,6 +66,7 @@ #define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x0C55C) #define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560) #define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564) +#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580) #define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) #define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) @@ -120,6 +126,12 @@ #define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) #define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1) +#define S5P_EPLLCON0_ENABLE_SHIFT (31) +#define S5P_EPLLCON0_LOCKED_SHIFT (29) + +#define S5P_VPLLCON0_ENABLE_SHIFT (31) +#define S5P_VPLLCON0_LOCKED_SHIFT (29) + #define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16) #define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT) diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h index a9643371f8e..fa49bbb8e7b 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h @@ -158,6 +158,7 @@ #define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0) #define S5P_PMU_SATA_PHY_CONTROL_EN 0x1 +#define S5P_CORE_LOCAL_PWR_EN 0x3 #define S5P_INT_LOCAL_PWR_EN 0x7 #define S5P_CHECK_SLEEP 0x00000BAD diff --git a/arch/arm/mach-exynos4/init.c b/arch/arm/mach-exynos4/init.c index cf91f50e43a..a8a83e3881a 100644 --- a/arch/arm/mach-exynos4/init.c +++ b/arch/arm/mach-exynos4/init.c @@ -35,6 +35,7 @@ void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) tcfg->clocks = exynos4_serial_clocks; tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks); } + tcfg->flags |= NO_NEED_CHECK_CLKSRC; } s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); diff --git a/arch/arm/mach-exynos4/localtimer.c b/arch/arm/mach-exynos4/localtimer.c deleted file mode 100644 index 6bf3d0ab962..00000000000 --- a/arch/arm/mach-exynos4/localtimer.c +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/arch/arm/mach-exynos4/localtimer.c - * - * Cloned from linux/arch/arm/mach-realview/localtimer.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/clockchips.h> - -#include <asm/irq.h> -#include <asm/localtimer.h> - -/* - * Setup the local clock events for a CPU. - */ -int __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = IRQ_LOCALTIMER; - twd_timer_setup(evt); - return 0; -} diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c index 642702bb5b1..1920906acd2 100644 --- a/arch/arm/mach-exynos4/mach-nuri.c +++ b/arch/arm/mach-exynos4/mach-nuri.c @@ -13,10 +13,15 @@ #include <linux/input.h> #include <linux/i2c.h> #include <linux/i2c/atmel_mxt_ts.h> +#include <linux/i2c-gpio.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> +#include <linux/power/max8903_charger.h> +#include <linux/power/max17042_battery.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> +#include <linux/mfd/max8997.h> +#include <linux/mfd/max8997-private.h> #include <linux/mmc/host.h> #include <linux/fb.h> #include <linux/pwm_backlight.h> @@ -26,6 +31,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <plat/adc.h> #include <plat/regs-serial.h> #include <plat/exynos4.h> #include <plat/cpu.h> @@ -54,6 +60,7 @@ enum fixed_regulator_id { FIXED_REG_ID_MMC = 0, + FIXED_REG_ID_MAX8903, }; static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = { @@ -344,11 +351,731 @@ static void __init nuri_tsp_init(void) s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); } +static struct regulator_consumer_supply __initdata max8997_ldo1_[] = { + REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo3_[] = { + REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo4_[] = { + REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo5_[] = { + REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo7_[] = { + REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo8_[] = { + REGULATOR_SUPPLY("vusb_d", NULL), /* Used by CPU */ + REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo11_[] = { + REGULATOR_SUPPLY("vcc", "platform-lcd"), /* U804 LVDS */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo12_[] = { + REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo13_[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), /* TFLASH */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo14_[] = { + REGULATOR_SUPPLY("inmotor", "max8997-haptic"), +}; +static struct regulator_consumer_supply __initdata max8997_ldo15_[] = { + REGULATOR_SUPPLY("avdd", "3-004a"), /* Touch Screen */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo16_[] = { + REGULATOR_SUPPLY("d_sensor", "0-001f"), /* HDC803 */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo18_[] = { + REGULATOR_SUPPLY("vdd", "3-004a"), /* Touch Screen */ +}; +static struct regulator_consumer_supply __initdata max8997_buck1_[] = { + REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ +}; +static struct regulator_consumer_supply __initdata max8997_buck2_[] = { + REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */ +}; +static struct regulator_consumer_supply __initdata max8997_buck3_[] = { + REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */ +}; +static struct regulator_consumer_supply __initdata max8997_buck4_[] = { + REGULATOR_SUPPLY("core", "0-001f"), /* HDC803 */ +}; +static struct regulator_consumer_supply __initdata max8997_buck6_[] = { + REGULATOR_SUPPLY("dig_28", "0-001f"), /* pin "7" of HDC803 */ +}; +static struct regulator_consumer_supply __initdata max8997_esafeout1_[] = { + REGULATOR_SUPPLY("usb_vbus", NULL), /* CPU's USB OTG */ +}; +static struct regulator_consumer_supply __initdata max8997_esafeout2_[] = { + REGULATOR_SUPPLY("usb_vbus", "modemctl"), /* VBUS of Modem */ +}; + +static struct regulator_consumer_supply __initdata max8997_charger_[] = { + REGULATOR_SUPPLY("vinchg1", "charger-manager.0"), +}; +static struct regulator_consumer_supply __initdata max8997_chg_toff_[] = { + REGULATOR_SUPPLY("vinchg_stop", NULL), /* for jack interrupt handlers */ +}; + +static struct regulator_consumer_supply __initdata max8997_32khz_ap_[] = { + REGULATOR_SUPPLY("gps_clk", "bcm4751"), + REGULATOR_SUPPLY("bt_clk", "bcm4330-b1"), + REGULATOR_SUPPLY("wifi_clk", "bcm433-b1"), +}; + +static struct regulator_init_data __initdata max8997_ldo1_data = { + .constraints = { + .name = "VADC_3.3V_C210", + .min_uV = 3300000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo1_), + .consumer_supplies = max8997_ldo1_, +}; + +static struct regulator_init_data __initdata max8997_ldo2_data = { + .constraints = { + .name = "VALIVE_1.1V_C210", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo3_data = { + .constraints = { + .name = "VUSB_1.1V_C210", + .min_uV = 1100000, + .max_uV = 1100000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo3_), + .consumer_supplies = max8997_ldo3_, +}; + +static struct regulator_init_data __initdata max8997_ldo4_data = { + .constraints = { + .name = "VMIPI_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo4_), + .consumer_supplies = max8997_ldo4_, +}; + +static struct regulator_init_data __initdata max8997_ldo5_data = { + .constraints = { + .name = "VHSIC_1.2V_C210", + .min_uV = 1200000, + .max_uV = 1200000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo5_), + .consumer_supplies = max8997_ldo5_, +}; + +static struct regulator_init_data __initdata max8997_ldo6_data = { + .constraints = { + .name = "VCC_1.8V_PDA", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo7_data = { + .constraints = { + .name = "CAM_ISP_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo7_), + .consumer_supplies = max8997_ldo7_, +}; + +static struct regulator_init_data __initdata max8997_ldo8_data = { + .constraints = { + .name = "VUSB/VDAC_3.3V_C210", + .min_uV = 3300000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo8_), + .consumer_supplies = max8997_ldo8_, +}; + +static struct regulator_init_data __initdata max8997_ldo9_data = { + .constraints = { + .name = "VCC_2.8V_PDA", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo10_data = { + .constraints = { + .name = "VPLL_1.1V_C210", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo11_data = { + .constraints = { + .name = "LVDS_VDD3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .boot_on = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo11_), + .consumer_supplies = max8997_ldo11_, +}; + +static struct regulator_init_data __initdata max8997_ldo12_data = { + .constraints = { + .name = "VT_CAM_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo12_), + .consumer_supplies = max8997_ldo12_, +}; + +static struct regulator_init_data __initdata max8997_ldo13_data = { + .constraints = { + .name = "VTF_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo13_), + .consumer_supplies = max8997_ldo13_, +}; + +static struct regulator_init_data __initdata max8997_ldo14_data = { + .constraints = { + .name = "VCC_3.0V_MOTOR", + .min_uV = 3000000, + .max_uV = 3000000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo14_), + .consumer_supplies = max8997_ldo14_, +}; + +static struct regulator_init_data __initdata max8997_ldo15_data = { + .constraints = { + .name = "VTOUCH_ADVV2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo15_), + .consumer_supplies = max8997_ldo15_, +}; + +static struct regulator_init_data __initdata max8997_ldo16_data = { + .constraints = { + .name = "CAM_SENSOR_IO_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo16_), + .consumer_supplies = max8997_ldo16_, +}; + +static struct regulator_init_data __initdata max8997_ldo18_data = { + .constraints = { + .name = "VTOUCH_VDD2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo18_), + .consumer_supplies = max8997_ldo18_, +}; + +static struct regulator_init_data __initdata max8997_ldo21_data = { + .constraints = { + .name = "VDDQ_M1M2_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_buck1_data = { + .constraints = { + .name = "VARM_1.2V_C210", + .min_uV = 900000, + .max_uV = 1350000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck1_), + .consumer_supplies = max8997_buck1_, +}; + +static struct regulator_init_data __initdata max8997_buck2_data = { + .constraints = { + .name = "VINT_1.1V_C210", + .min_uV = 900000, + .max_uV = 1100000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck2_), + .consumer_supplies = max8997_buck2_, +}; + +static struct regulator_init_data __initdata max8997_buck3_data = { + .constraints = { + .name = "VG3D_1.1V_C210", + .min_uV = 900000, + .max_uV = 1100000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck3_), + .consumer_supplies = max8997_buck3_, +}; + +static struct regulator_init_data __initdata max8997_buck4_data = { + .constraints = { + .name = "CAM_ISP_CORE_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck4_), + .consumer_supplies = max8997_buck4_, +}; + +static struct regulator_init_data __initdata max8997_buck5_data = { + .constraints = { + .name = "VMEM_1.2V_C210", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_buck6_data = { + .constraints = { + .name = "CAM_AF_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck6_), + .consumer_supplies = max8997_buck6_, +}; + +static struct regulator_init_data __initdata max8997_buck7_data = { + .constraints = { + .name = "VCC_SUB_2.0V", + .min_uV = 2000000, + .max_uV = 2000000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_32khz_ap_data = { + .constraints = { + .name = "32KHz AP", + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_32khz_ap_), + .consumer_supplies = max8997_32khz_ap_, +}; + +static struct regulator_init_data __initdata max8997_32khz_cp_data = { + .constraints = { + .name = "32KHz CP", + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_vichg_data = { + .constraints = { + .name = "VICHG", + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_esafeout1_data = { + .constraints = { + .name = "SAFEOUT1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout1_), + .consumer_supplies = max8997_esafeout1_, +}; + +static struct regulator_init_data __initdata max8997_esafeout2_data = { + .constraints = { + .name = "SAFEOUT2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout2_), + .consumer_supplies = max8997_esafeout2_, +}; + +static struct regulator_init_data __initdata max8997_charger_cv_data = { + .constraints = { + .name = "CHARGER_CV", + .min_uV = 4200000, + .max_uV = 4200000, + .apply_uV = 1, + }, +}; + +static struct regulator_init_data __initdata max8997_charger_data = { + .constraints = { + .name = "CHARGER", + .min_uA = 200000, + .max_uA = 950000, + .boot_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_CURRENT, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_charger_), + .consumer_supplies = max8997_charger_, +}; + +static struct regulator_init_data __initdata max8997_charger_topoff_data = { + .constraints = { + .name = "CHARGER TOPOFF", + .min_uA = 50000, + .max_uA = 200000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_chg_toff_), + .consumer_supplies = max8997_chg_toff_, +}; + +static struct max8997_regulator_data __initdata nuri_max8997_regulators[] = { + { MAX8997_LDO1, &max8997_ldo1_data }, + { MAX8997_LDO2, &max8997_ldo2_data }, + { MAX8997_LDO3, &max8997_ldo3_data }, + { MAX8997_LDO4, &max8997_ldo4_data }, + { MAX8997_LDO5, &max8997_ldo5_data }, + { MAX8997_LDO6, &max8997_ldo6_data }, + { MAX8997_LDO7, &max8997_ldo7_data }, + { MAX8997_LDO8, &max8997_ldo8_data }, + { MAX8997_LDO9, &max8997_ldo9_data }, + { MAX8997_LDO10, &max8997_ldo10_data }, + { MAX8997_LDO11, &max8997_ldo11_data }, + { MAX8997_LDO12, &max8997_ldo12_data }, + { MAX8997_LDO13, &max8997_ldo13_data }, + { MAX8997_LDO14, &max8997_ldo14_data }, + { MAX8997_LDO15, &max8997_ldo15_data }, + { MAX8997_LDO16, &max8997_ldo16_data }, + + { MAX8997_LDO18, &max8997_ldo18_data }, + { MAX8997_LDO21, &max8997_ldo21_data }, + + { MAX8997_BUCK1, &max8997_buck1_data }, + { MAX8997_BUCK2, &max8997_buck2_data }, + { MAX8997_BUCK3, &max8997_buck3_data }, + { MAX8997_BUCK4, &max8997_buck4_data }, + { MAX8997_BUCK5, &max8997_buck5_data }, + { MAX8997_BUCK6, &max8997_buck6_data }, + { MAX8997_BUCK7, &max8997_buck7_data }, + + { MAX8997_EN32KHZ_AP, &max8997_32khz_ap_data }, + { MAX8997_EN32KHZ_CP, &max8997_32khz_cp_data }, + + { MAX8997_ENVICHG, &max8997_vichg_data }, + { MAX8997_ESAFEOUT1, &max8997_esafeout1_data }, + { MAX8997_ESAFEOUT2, &max8997_esafeout2_data }, + { MAX8997_CHARGER_CV, &max8997_charger_cv_data }, + { MAX8997_CHARGER, &max8997_charger_data }, + { MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data }, +}; + +static struct max8997_platform_data __initdata nuri_max8997_pdata = { + .wakeup = 1, + + .num_regulators = ARRAY_SIZE(nuri_max8997_regulators), + .regulators = nuri_max8997_regulators, + + .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) }, + .buck2_gpiodvs = true, + + .buck1_voltage[0] = 1350000, /* 1.35V */ + .buck1_voltage[1] = 1300000, /* 1.3V */ + .buck1_voltage[2] = 1250000, /* 1.25V */ + .buck1_voltage[3] = 1200000, /* 1.2V */ + .buck1_voltage[4] = 1150000, /* 1.15V */ + .buck1_voltage[5] = 1100000, /* 1.1V */ + .buck1_voltage[6] = 1000000, /* 1.0V */ + .buck1_voltage[7] = 950000, /* 0.95V */ + + .buck2_voltage[0] = 1100000, /* 1.1V */ + .buck2_voltage[1] = 1000000, /* 1.0V */ + .buck2_voltage[2] = 950000, /* 0.95V */ + .buck2_voltage[3] = 900000, /* 0.9V */ + .buck2_voltage[4] = 1100000, /* 1.1V */ + .buck2_voltage[5] = 1000000, /* 1.0V */ + .buck2_voltage[6] = 950000, /* 0.95V */ + .buck2_voltage[7] = 900000, /* 0.9V */ + + .buck5_voltage[0] = 1200000, /* 1.2V */ + .buck5_voltage[1] = 1200000, /* 1.2V */ + .buck5_voltage[2] = 1200000, /* 1.2V */ + .buck5_voltage[3] = 1200000, /* 1.2V */ + .buck5_voltage[4] = 1200000, /* 1.2V */ + .buck5_voltage[5] = 1200000, /* 1.2V */ + .buck5_voltage[6] = 1200000, /* 1.2V */ + .buck5_voltage[7] = 1200000, /* 1.2V */ +}; + /* GPIO I2C 5 (PMIC) */ +enum { I2C5_MAX8997 }; static struct i2c_board_info i2c5_devs[] __initdata = { - /* max8997, To be updated */ + [I2C5_MAX8997] = { + I2C_BOARD_INFO("max8997", 0xCC >> 1), + .platform_data = &nuri_max8997_pdata, + }, +}; + +static struct max17042_platform_data nuri_battery_platform_data = { +}; + +/* GPIO I2C 9 (Fuel Gauge) */ +static struct i2c_gpio_platform_data i2c9_gpio_data = { + .sda_pin = EXYNOS4_GPY4(0), /* XM0ADDR_8 */ + .scl_pin = EXYNOS4_GPY4(1), /* XM0ADDR_9 */ +}; +static struct platform_device i2c9_gpio = { + .name = "i2c-gpio", + .id = 9, + .dev = { + .platform_data = &i2c9_gpio_data, + }, +}; +enum { I2C9_MAX17042}; +static struct i2c_board_info i2c9_devs[] __initdata = { + [I2C9_MAX17042] = { + I2C_BOARD_INFO("max17042", 0x36), + .platform_data = &nuri_battery_platform_data, + }, +}; + +/* MAX8903 Secondary Charger */ +static struct regulator_consumer_supply supplies_max8903[] = { + REGULATOR_SUPPLY("vinchg2", "charger-manager.0"), +}; + +static struct regulator_init_data max8903_charger_en_data = { + .constraints = { + .name = "VOUT_CHARGER", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(supplies_max8903), + .consumer_supplies = supplies_max8903, +}; + +static struct fixed_voltage_config max8903_charger_en = { + .supply_name = "VOUT_CHARGER", + .microvolts = 5000000, /* Assume 5VDC */ + .gpio = EXYNOS4_GPY4(5), /* TA_EN negaged */ + .enable_high = 0, /* Enable = Low */ + .enabled_at_boot = 1, + .init_data = &max8903_charger_en_data, }; +static struct platform_device max8903_fixed_reg_dev = { + .name = "reg-fixed-voltage", + .id = FIXED_REG_ID_MAX8903, + .dev = { .platform_data = &max8903_charger_en }, +}; + +static struct max8903_pdata nuri_max8903 = { + /* + * cen: don't control with the driver, let it be + * controlled by regulator above + */ + .dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */ + /* uok, usus: not connected */ + .chg = EXYNOS4_GPE2(0), /* TA_nCHG */ + /* flt: vcc_1.8V_pda */ + .dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */ + + .dc_valid = true, + .usb_valid = false, /* USB is not wired to MAX8903 */ +}; + +static struct platform_device nuri_max8903_device = { + .name = "max8903-charger", + .dev = { + .platform_data = &nuri_max8903, + }, +}; + +static struct device *nuri_cm_devices[] = { + &s3c_device_i2c5.dev, + &s3c_device_adc.dev, + NULL, /* Reserved for UART */ + NULL, +}; + +static void __init nuri_power_init(void) +{ + int gpio; + int irq_base = IRQ_GPIO_END + 1; + int ta_en = 0; + + nuri_max8997_pdata.irq_base = irq_base; + irq_base += MAX8997_IRQ_NR; + + gpio = EXYNOS4_GPX0(7); + gpio_request(gpio, "AP_PMIC_IRQ"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + + gpio = EXYNOS4_GPX2(3); + gpio_request(gpio, "FUEL_ALERT"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + + gpio = nuri_max8903.dok; + gpio_request(gpio, "TA_nCONNECTED"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + ta_en = gpio_get_value(gpio) ? 0 : 1; + + gpio = nuri_max8903.chg; + gpio_request(gpio, "TA_nCHG"); + gpio_direction_input(gpio); + + gpio = nuri_max8903.dcm; + gpio_request(gpio, "CURR_ADJ"); + gpio_direction_output(gpio, ta_en); +} + /* USB EHCI */ static struct s5p_ehci_platdata nuri_ehci_pdata; @@ -361,6 +1088,7 @@ static void __init nuri_ehci_init(void) static struct platform_device *nuri_devices[] __initdata = { /* Samsung Platform Devices */ + &s3c_device_i2c5, /* PMIC should initialize first */ &emmc_fixed_voltage, &s3c_device_hsmmc0, &s3c_device_hsmmc2, @@ -369,11 +1097,16 @@ static struct platform_device *nuri_devices[] __initdata = { &s3c_device_timer[0], &s5p_device_ehci, &s3c_device_i2c3, + &i2c9_gpio, + &s3c_device_adc, + &s3c_device_rtc, /* NURI Devices */ &nuri_gpio_keys, &nuri_lcd_device, &nuri_backlight_device, + &max8903_fixed_reg_dev, + &nuri_max8903_device, }; static void __init nuri_map_io(void) @@ -387,11 +1120,16 @@ static void __init nuri_machine_init(void) { nuri_sdhci_init(); nuri_tsp_init(); + nuri_power_init(); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); s3c_i2c3_set_platdata(&i2c3_data); i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); + s3c_i2c5_set_platdata(NULL); + i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7)); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); + i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3)); + i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs)); nuri_ehci_init(); clk_xusbxti.rate = 24000000; diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index 152676471b6..ccc8fa11b54 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -78,9 +78,7 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { }; static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK0(2), - .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT .max_width = 8, @@ -96,9 +94,7 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = { }; static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT .max_width = 8, @@ -185,9 +181,12 @@ static struct platform_device *smdkv310_devices[] __initdata = { &exynos4_device_pd[PD_CAM], &exynos4_device_pd[PD_TV], &exynos4_device_pd[PD_GPS], + &exynos4_device_spdif, &exynos4_device_sysmmu, &samsung_asoc_dma, + &samsung_asoc_idma, &smdkv310_smsc911x, + &exynos4_device_ahci, }; static void __init smdkv310_smsc911x_init(void) diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c index 97d329fff2c..5d8b097bb69 100644 --- a/arch/arm/mach-exynos4/mach-universal_c210.c +++ b/arch/arm/mach-exynos4/mach-universal_c210.c @@ -18,6 +18,9 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/max8952.h> #include <linux/mmc/host.h> +#include <linux/i2c-gpio.h> +#include <linux/i2c/mcs.h> +#include <linux/i2c/atmel_mxt_ts.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -27,6 +30,7 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> #include <plat/sdhci.h> #include <mach/map.h> @@ -477,6 +481,96 @@ static struct i2c_board_info i2c5_devs[] __initdata = { }, }; +/* I2C3 (TSP) */ +static struct mxt_platform_data qt602240_platform_data = { + .x_line = 19, + .y_line = 11, + .x_size = 800, + .y_size = 480, + .blen = 0x11, + .threshold = 0x28, + .voltage = 2800000, /* 2.8V */ + .orient = MXT_DIAGONAL, +}; + +static struct i2c_board_info i2c3_devs[] __initdata = { + { + I2C_BOARD_INFO("qt602240_ts", 0x4a), + .platform_data = &qt602240_platform_data, + }, +}; + +static void __init universal_tsp_init(void) +{ + int gpio; + + /* TSP_LDO_ON: XMDMADDR_11 */ + gpio = EXYNOS4_GPE2(3); + gpio_request(gpio, "TSP_LDO_ON"); + gpio_direction_output(gpio, 1); + gpio_export(gpio, 0); + + /* TSP_INT: XMDMADDR_7 */ + gpio = EXYNOS4_GPE1(7); + gpio_request(gpio, "TSP_INT"); + + s5p_register_gpio_interrupt(gpio); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + i2c3_devs[0].irq = gpio_to_irq(gpio); +} + + +/* GPIO I2C 12 (3 Touchkey) */ +static uint32_t touchkey_keymap[] = { + /* MCS_KEY_MAP(value, keycode) */ + MCS_KEY_MAP(0, KEY_MENU), /* KEY_SEND */ + MCS_KEY_MAP(1, KEY_BACK), /* KEY_END */ +}; + +static struct mcs_platform_data touchkey_data = { + .keymap = touchkey_keymap, + .keymap_size = ARRAY_SIZE(touchkey_keymap), + .key_maxval = 2, +}; + +/* GPIO I2C 3_TOUCH 2.8V */ +#define I2C_GPIO_BUS_12 12 +static struct i2c_gpio_platform_data i2c_gpio12_data = { + .sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */ + .scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */ +}; + +static struct platform_device i2c_gpio12 = { + .name = "i2c-gpio", + .id = I2C_GPIO_BUS_12, + .dev = { + .platform_data = &i2c_gpio12_data, + }, +}; + +static struct i2c_board_info i2c_gpio12_devs[] __initdata = { + { + I2C_BOARD_INFO("mcs5080_touchkey", 0x20), + .platform_data = &touchkey_data, + }, +}; + +static void __init universal_touchkey_init(void) +{ + int gpio; + + gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */ + gpio_request(gpio, "3_TOUCH_INT"); + s5p_register_gpio_interrupt(gpio); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + i2c_gpio12_devs[0].irq = gpio_to_irq(gpio); + + gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */ + gpio_request(gpio, "3_TOUCH_EN"); + gpio_direction_output(gpio, 1); +} + /* GPIO KEYS */ static struct gpio_keys_button universal_gpio_keys_tables[] = { { @@ -608,13 +702,19 @@ static struct i2c_board_info i2c1_devs[] __initdata = { static struct platform_device *universal_devices[] __initdata = { /* Samsung Platform Devices */ + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc3, &mmc0_fixed_voltage, &s3c_device_hsmmc0, &s3c_device_hsmmc2, &s3c_device_hsmmc3, + &s3c_device_i2c3, &s3c_device_i2c5, /* Universal Devices */ + &i2c_gpio12, &universal_gpio_keys, &s5p_device_onenand, }; @@ -633,9 +733,17 @@ static void __init universal_machine_init(void) i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + universal_tsp_init(); + s3c_i2c3_set_platdata(NULL); + i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); + s3c_i2c5_set_platdata(NULL); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); + universal_touchkey_init(); + i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs, + ARRAY_SIZE(i2c_gpio12_devs)); + /* Last */ platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); } diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index 14ac10b7ec0..1ae059b7ad7 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -383,8 +383,8 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq); } else { mct_tick1_event_irq.dev_id = &mct_tick[cpu]; - irq_set_affinity(IRQ_MCT1, cpumask_of(1)); setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq); + irq_set_affinity(IRQ_MCT_L1, cpumask_of(1)); } } diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index c5e65a02be8..a7f312c1289 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -28,9 +28,12 @@ #include <mach/hardware.h> #include <mach/regs-clock.h> +#include <mach/regs-pmu.h> extern void exynos4_secondary_startup(void); +#define CPU1_BOOT_REG S5P_VA_SYSRAM + /* * control for which core is the next to come out of the secondary * boot "holding pen" @@ -58,6 +61,31 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(boot_lock); +static void __cpuinit exynos4_gic_secondary_init(void) +{ + void __iomem *dist_base = S5P_VA_GIC_DIST + + (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + void __iomem *cpu_base = S5P_VA_GIC_CPU + + (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + int i; + + /* + * Deal with the banked PPI and SGI interrupts - disable all + * PPI interrupts, ensure all SGI interrupts are enabled. + */ + __raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR); + __raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET); + + /* + * Set priority on PPI and SGI interrupts + */ + for (i = 0; i < 32; i += 4) + __raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4); + + __raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK); + __raw_writel(1, cpu_base + GIC_CPU_CTRL); +} + void __cpuinit platform_secondary_init(unsigned int cpu) { /* @@ -65,7 +93,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_secondary_init(0); + exynos4_gic_secondary_init(); /* * let the primary processor know we're out of the @@ -100,16 +128,41 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) */ write_pen_release(cpu); + if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) { + __raw_writel(S5P_CORE_LOCAL_PWR_EN, + S5P_ARM_CORE1_CONFIGURATION); + + timeout = 10; + + /* wait max 10 ms until cpu1 is on */ + while ((__raw_readl(S5P_ARM_CORE1_STATUS) + & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) { + if (timeout-- == 0) + break; + + mdelay(1); + } + + if (timeout == 0) { + printk(KERN_ERR "cpu1 power enable failed"); + spin_unlock(&boot_lock); + return -ETIMEDOUT; + } + } /* * Send the secondary CPU a soft interrupt, thereby causing * the boot monitor to read the system wide flags register, * and branch to the address found there. */ - gic_raise_softirq(cpumask_of(cpu), 1); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { smp_rmb(); + + __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), + CPU1_BOOT_REG); + gic_raise_softirq(cpumask_of(cpu), 1); + if (pen_release == -1) break; diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c index 8755ca8dd48..9ef2e99fb8b 100644 --- a/arch/arm/mach-exynos4/pm.c +++ b/arch/arm/mach-exynos4/pm.c @@ -18,92 +18,23 @@ #include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> #include <plat/cpu.h> #include <plat/pm.h> +#include <plat/pll.h> +#include <plat/regs-srom.h> #include <mach/regs-irq.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> #include <mach/regs-pmu.h> #include <mach/pm-core.h> - -static struct sleep_save exynos4_sleep[] = { - { .reg = S5P_ARM_CORE0_LOWPWR , .val = 0x2, }, - { .reg = S5P_DIS_IRQ_CORE0 , .val = 0x0, }, - { .reg = S5P_DIS_IRQ_CENTRAL0 , .val = 0x0, }, - { .reg = S5P_ARM_CORE1_LOWPWR , .val = 0x2, }, - { .reg = S5P_DIS_IRQ_CORE1 , .val = 0x0, }, - { .reg = S5P_DIS_IRQ_CENTRAL1 , .val = 0x0, }, - { .reg = S5P_ARM_COMMON_LOWPWR , .val = 0x2, }, - { .reg = S5P_L2_0_LOWPWR , .val = 0x3, }, - { .reg = S5P_L2_1_LOWPWR , .val = 0x3, }, - { .reg = S5P_CMU_ACLKSTOP_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_SCLKSTOP_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_LOWPWR , .val = 0x0, }, - { .reg = S5P_APLL_SYSCLK_LOWPWR , .val = 0x0, }, - { .reg = S5P_MPLL_SYSCLK_LOWPWR , .val = 0x0, }, - { .reg = S5P_VPLL_SYSCLK_LOWPWR , .val = 0x0, }, - { .reg = S5P_EPLL_SYSCLK_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_GPSALIVE_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_CAM_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_TV_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_MFC_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_G3D_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_LCD0_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_LCD1_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_GPS_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_CAM_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_TV_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_MFC_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_G3D_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_LCD0_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_LCD1_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_GPS_LOWPWR , .val = 0x0, }, - { .reg = S5P_TOP_BUS_LOWPWR , .val = 0x0, }, - { .reg = S5P_TOP_RETENTION_LOWPWR , .val = 0x1, }, - { .reg = S5P_TOP_PWR_LOWPWR , .val = 0x3, }, - { .reg = S5P_LOGIC_RESET_LOWPWR , .val = 0x0, }, - { .reg = S5P_ONENAND_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_MODIMIF_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_G2D_ACP_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_USBOTG_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_HSMMC_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_CSSYS_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_SECSS_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_PCIE_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_SATA_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_DRAM_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_GPIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_UART_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_MMCA_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_MMCB_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_EBIA_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_EBIB_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_ISOLATION_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_ALV_SEL_LOWPWR , .val = 0x0, }, - { .reg = S5P_XUSBXTI_LOWPWR , .val = 0x0, }, - { .reg = S5P_XXTI_LOWPWR , .val = 0x0, }, - { .reg = S5P_EXT_REGULATOR_LOWPWR , .val = 0x0, }, - { .reg = S5P_GPIO_MODE_LOWPWR , .val = 0x0, }, - { .reg = S5P_GPIO_MODE_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_CAM_LOWPWR , .val = 0x0, }, - { .reg = S5P_TV_LOWPWR , .val = 0x0, }, - { .reg = S5P_MFC_LOWPWR , .val = 0x0, }, - { .reg = S5P_G3D_LOWPWR , .val = 0x0, }, - { .reg = S5P_LCD0_LOWPWR , .val = 0x0, }, - { .reg = S5P_LCD1_LOWPWR , .val = 0x0, }, - { .reg = S5P_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_GPS_LOWPWR , .val = 0x0, }, - { .reg = S5P_GPS_ALIVE_LOWPWR , .val = 0x0, }, -}; +#include <mach/pmu.h> static struct sleep_save exynos4_set_clksrc[] = { { .reg = S5P_CLKSRC_MASK_TOP , .val = 0x00000001, }, @@ -118,20 +49,28 @@ static struct sleep_save exynos4_set_clksrc[] = { { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, }, }; +static struct sleep_save exynos4_epll_save[] = { + SAVE_ITEM(S5P_EPLL_CON0), + SAVE_ITEM(S5P_EPLL_CON1), +}; + +static struct sleep_save exynos4_vpll_save[] = { + SAVE_ITEM(S5P_VPLL_CON0), + SAVE_ITEM(S5P_VPLL_CON1), +}; + static struct sleep_save exynos4_core_save[] = { /* CMU side */ SAVE_ITEM(S5P_CLKDIV_LEFTBUS), SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), - SAVE_ITEM(S5P_EPLL_CON0), - SAVE_ITEM(S5P_EPLL_CON1), - SAVE_ITEM(S5P_VPLL_CON0), - SAVE_ITEM(S5P_VPLL_CON1), SAVE_ITEM(S5P_CLKSRC_TOP0), SAVE_ITEM(S5P_CLKSRC_TOP1), SAVE_ITEM(S5P_CLKSRC_CAM), + SAVE_ITEM(S5P_CLKSRC_TV), SAVE_ITEM(S5P_CLKSRC_MFC), + SAVE_ITEM(S5P_CLKSRC_G3D), SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKSRC_LCD0), SAVE_ITEM(S5P_CLKSRC_LCD1), @@ -158,6 +97,7 @@ static struct sleep_save exynos4_core_save[] = { SAVE_ITEM(S5P_CLKDIV_PERIL4), SAVE_ITEM(S5P_CLKDIV_PERIL5), SAVE_ITEM(S5P_CLKDIV_TOP), + SAVE_ITEM(S5P_CLKSRC_MASK_TOP), SAVE_ITEM(S5P_CLKSRC_MASK_CAM), SAVE_ITEM(S5P_CLKSRC_MASK_TV), SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), @@ -166,6 +106,7 @@ static struct sleep_save exynos4_core_save[] = { SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), + SAVE_ITEM(S5P_CLKDIV2_RATIO), SAVE_ITEM(S5P_CLKGATE_SCLKCAM), SAVE_ITEM(S5P_CLKGATE_IP_CAM), SAVE_ITEM(S5P_CLKGATE_IP_TV), @@ -186,8 +127,10 @@ static struct sleep_save exynos4_core_save[] = { SAVE_ITEM(S5P_CLKGATE_IP_DMC), SAVE_ITEM(S5P_CLKSRC_CPU), SAVE_ITEM(S5P_CLKDIV_CPU), + SAVE_ITEM(S5P_CLKDIV_CPU + 0x4), SAVE_ITEM(S5P_CLKGATE_SCLKCPU), SAVE_ITEM(S5P_CLKGATE_IP_CPU), + /* GIC side */ SAVE_ITEM(S5P_VA_GIC_CPU + 0x000), SAVE_ITEM(S5P_VA_GIC_CPU + 0x004), @@ -270,6 +213,13 @@ static struct sleep_save exynos4_core_save[] = { SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x070), SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x080), SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x090), + + /* SROM side */ + SAVE_ITEM(S5P_SROM_BW), + SAVE_ITEM(S5P_SROM_BC0), + SAVE_ITEM(S5P_SROM_BC1), + SAVE_ITEM(S5P_SROM_BC2), + SAVE_ITEM(S5P_SROM_BC3), }; static struct sleep_save exynos4_l2cc_save[] = { @@ -280,37 +230,11 @@ static struct sleep_save exynos4_l2cc_save[] = { SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL), }; -void exynos4_cpu_suspend(void) -{ - unsigned long tmp; - unsigned long mask = 0xFFFFFFFF; - - /* Setting Central Sequence Register for power down mode */ - - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); - tmp &= ~(S5P_CENTRAL_LOWPWR_CFG); - __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); - - /* Setting Central Sequence option Register */ - - tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION); - tmp &= ~(S5P_USE_MASK); - tmp |= S5P_USE_STANDBY_WFI0; - __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); - - /* Clear all interrupt pending to avoid early wakeup */ - - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x280)); - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x284)); - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x288)); - - /* Disable all interrupt */ - - __raw_writel(0x0, (S5P_VA_GIC_CPU + 0x000)); - __raw_writel(0x0, (S5P_VA_GIC_DIST + 0x000)); - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x184)); - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x188)); +/* For Cortex-A9 Diagnostic and Power control register */ +static unsigned int save_arm_register[2]; +void exynos4_cpu_suspend(unsigned long arg) +{ outer_flush_all(); /* issue the standby signal into the pm unit. */ @@ -326,12 +250,14 @@ static void exynos4_pm_prepare(void) s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save)); s3c_pm_do_save(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); + s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save)); + s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save)); tmp = __raw_readl(S5P_INFORM1); /* Set value of power down register for sleep mode */ - s3c_pm_do_restore_core(exynos4_sleep, ARRAY_SIZE(exynos4_sleep)); + exynos4_sys_powerdown_conf(SYS_SLEEP); __raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1); /* ensure at least INFORM0 has the resume address */ @@ -373,12 +299,80 @@ void exynos4_scu_enable(void __iomem *scu_base) flush_cache_all(); } +static unsigned long pll_base_rate; + +static void exynos4_restore_pll(void) +{ + unsigned long pll_con, locktime, lockcnt; + unsigned long pll_in_rate; + unsigned int p_div, epll_wait = 0, vpll_wait = 0; + + if (pll_base_rate == 0) + return; + + pll_in_rate = pll_base_rate; + + /* EPLL */ + pll_con = exynos4_epll_save[0].val; + + if (pll_con & (1 << 31)) { + pll_con &= (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT); + p_div = (pll_con >> PLL46XX_PDIV_SHIFT); + + pll_in_rate /= 1000000; + + locktime = (3000 / pll_in_rate) * p_div; + lockcnt = locktime * 10000 / (10000 / pll_in_rate); + + __raw_writel(lockcnt, S5P_EPLL_LOCK); + + s3c_pm_do_restore_core(exynos4_epll_save, + ARRAY_SIZE(exynos4_epll_save)); + epll_wait = 1; + } + + pll_in_rate = pll_base_rate; + + /* VPLL */ + pll_con = exynos4_vpll_save[0].val; + + if (pll_con & (1 << 31)) { + pll_in_rate /= 1000000; + /* 750us */ + locktime = 750; + lockcnt = locktime * 10000 / (10000 / pll_in_rate); + + __raw_writel(lockcnt, S5P_VPLL_LOCK); + + s3c_pm_do_restore_core(exynos4_vpll_save, + ARRAY_SIZE(exynos4_vpll_save)); + vpll_wait = 1; + } + + /* Wait PLL locking */ + + do { + if (epll_wait) { + pll_con = __raw_readl(S5P_EPLL_CON0); + if (pll_con & (1 << S5P_EPLLCON0_LOCKED_SHIFT)) + epll_wait = 0; + } + + if (vpll_wait) { + pll_con = __raw_readl(S5P_VPLL_CON0); + if (pll_con & (1 << S5P_VPLLCON0_LOCKED_SHIFT)) + vpll_wait = 0; + } + } while (epll_wait || vpll_wait); +} + static struct sysdev_driver exynos4_pm_driver = { .add = exynos4_pm_add, }; static __init int exynos4_pm_drvinit(void) { + struct clk *pll_base; unsigned int tmp; s3c_pm_init(); @@ -389,12 +383,69 @@ static __init int exynos4_pm_drvinit(void) tmp |= ((0xFF << 8) | (0x1F << 1)); __raw_writel(tmp, S5P_WAKEUP_MASK); + pll_base = clk_get(NULL, "xtal"); + + if (!IS_ERR(pll_base)) { + pll_base_rate = clk_get_rate(pll_base); + clk_put(pll_base); + } + return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver); } arch_initcall(exynos4_pm_drvinit); +static int exynos4_pm_suspend(void) +{ + unsigned long tmp; + + /* Setting Central Sequence Register for power down mode */ + + tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); + tmp &= ~S5P_CENTRAL_LOWPWR_CFG; + __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + + /* Save Power control register */ + asm ("mrc p15, 0, %0, c15, c0, 0" + : "=r" (tmp) : : "cc"); + save_arm_register[0] = tmp; + + /* Save Diagnostic register */ + asm ("mrc p15, 0, %0, c15, c0, 1" + : "=r" (tmp) : : "cc"); + save_arm_register[1] = tmp; + + return 0; +} + static void exynos4_pm_resume(void) { + unsigned long tmp; + + /* + * If PMU failed while entering sleep mode, WFI will be + * ignored by PMU and then exiting cpu_do_idle(). + * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically + * in this situation. + */ + tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); + if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) { + tmp |= S5P_CENTRAL_LOWPWR_CFG; + __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + /* No need to perform below restore code */ + goto early_wakeup; + } + /* Restore Power control register */ + tmp = save_arm_register[0]; + asm volatile ("mcr p15, 0, %0, c15, c0, 0" + : : "r" (tmp) + : "cc"); + + /* Restore Diagnostic register */ + tmp = save_arm_register[1]; + asm volatile ("mcr p15, 0, %0, c15, c0, 1" + : : "r" (tmp) + : "cc"); + /* For release retention */ __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); @@ -407,6 +458,8 @@ static void exynos4_pm_resume(void) s3c_pm_do_restore_core(exynos4_core_save, ARRAY_SIZE(exynos4_core_save)); + exynos4_restore_pll(); + exynos4_scu_enable(S5P_VA_SCU); #ifdef CONFIG_CACHE_L2X0 @@ -415,9 +468,13 @@ static void exynos4_pm_resume(void) /* enable L2X0*/ writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL); #endif + +early_wakeup: + return; } static struct syscore_ops exynos4_pm_syscore_ops = { + .suspend = exynos4_pm_suspend, .resume = exynos4_pm_resume, }; diff --git a/arch/arm/mach-exynos4/pmu.c b/arch/arm/mach-exynos4/pmu.c new file mode 100644 index 00000000000..7ea9eb2a20d --- /dev/null +++ b/arch/arm/mach-exynos4/pmu.c @@ -0,0 +1,175 @@ +/* linux/arch/arm/mach-exynos4/pmu.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS4210 - CPU PMU(Power Management Unit) support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/kernel.h> + +#include <mach/regs-clock.h> +#include <mach/pmu.h> + +static void __iomem *sys_powerdown_reg[] = { + S5P_ARM_CORE0_LOWPWR, + S5P_DIS_IRQ_CORE0, + S5P_DIS_IRQ_CENTRAL0, + S5P_ARM_CORE1_LOWPWR, + S5P_DIS_IRQ_CORE1, + S5P_DIS_IRQ_CENTRAL1, + S5P_ARM_COMMON_LOWPWR, + S5P_L2_0_LOWPWR, + S5P_L2_1_LOWPWR, + S5P_CMU_ACLKSTOP_LOWPWR, + S5P_CMU_SCLKSTOP_LOWPWR, + S5P_CMU_RESET_LOWPWR, + S5P_APLL_SYSCLK_LOWPWR, + S5P_MPLL_SYSCLK_LOWPWR, + S5P_VPLL_SYSCLK_LOWPWR, + S5P_EPLL_SYSCLK_LOWPWR, + S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, + S5P_CMU_RESET_GPSALIVE_LOWPWR, + S5P_CMU_CLKSTOP_CAM_LOWPWR, + S5P_CMU_CLKSTOP_TV_LOWPWR, + S5P_CMU_CLKSTOP_MFC_LOWPWR, + S5P_CMU_CLKSTOP_G3D_LOWPWR, + S5P_CMU_CLKSTOP_LCD0_LOWPWR, + S5P_CMU_CLKSTOP_LCD1_LOWPWR, + S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, + S5P_CMU_CLKSTOP_GPS_LOWPWR, + S5P_CMU_RESET_CAM_LOWPWR, + S5P_CMU_RESET_TV_LOWPWR, + S5P_CMU_RESET_MFC_LOWPWR, + S5P_CMU_RESET_G3D_LOWPWR, + S5P_CMU_RESET_LCD0_LOWPWR, + S5P_CMU_RESET_LCD1_LOWPWR, + S5P_CMU_RESET_MAUDIO_LOWPWR, + S5P_CMU_RESET_GPS_LOWPWR, + S5P_TOP_BUS_LOWPWR, + S5P_TOP_RETENTION_LOWPWR, + S5P_TOP_PWR_LOWPWR, + S5P_LOGIC_RESET_LOWPWR, + S5P_ONENAND_MEM_LOWPWR, + S5P_MODIMIF_MEM_LOWPWR, + S5P_G2D_ACP_MEM_LOWPWR, + S5P_USBOTG_MEM_LOWPWR, + S5P_HSMMC_MEM_LOWPWR, + S5P_CSSYS_MEM_LOWPWR, + S5P_SECSS_MEM_LOWPWR, + S5P_PCIE_MEM_LOWPWR, + S5P_SATA_MEM_LOWPWR, + S5P_PAD_RETENTION_DRAM_LOWPWR, + S5P_PAD_RETENTION_MAUDIO_LOWPWR, + S5P_PAD_RETENTION_GPIO_LOWPWR, + S5P_PAD_RETENTION_UART_LOWPWR, + S5P_PAD_RETENTION_MMCA_LOWPWR, + S5P_PAD_RETENTION_MMCB_LOWPWR, + S5P_PAD_RETENTION_EBIA_LOWPWR, + S5P_PAD_RETENTION_EBIB_LOWPWR, + S5P_PAD_RETENTION_ISOLATION_LOWPWR, + S5P_PAD_RETENTION_ALV_SEL_LOWPWR, + S5P_XUSBXTI_LOWPWR, + S5P_XXTI_LOWPWR, + S5P_EXT_REGULATOR_LOWPWR, + S5P_GPIO_MODE_LOWPWR, + S5P_GPIO_MODE_MAUDIO_LOWPWR, + S5P_CAM_LOWPWR, + S5P_TV_LOWPWR, + S5P_MFC_LOWPWR, + S5P_G3D_LOWPWR, + S5P_LCD0_LOWPWR, + S5P_LCD1_LOWPWR, + S5P_MAUDIO_LOWPWR, + S5P_GPS_LOWPWR, + S5P_GPS_ALIVE_LOWPWR, +}; + +static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = { + /* { AFTR, LPA, SLEEP }*/ + { 0, 0, 2 }, /* ARM_CORE0 */ + { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE0 */ + { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL0 */ + { 0, 0, 2 }, /* ARM_CORE1 */ + { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE1 */ + { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL1 */ + { 0, 0, 2 }, /* ARM_COMMON */ + { 2, 2, 3 }, /* ARM_CPU_L2_0 */ + { 2, 2, 3 }, /* ARM_CPU_L2_1 */ + { 1, 0, 0 }, /* CMU_ACLKSTOP */ + { 1, 0, 0 }, /* CMU_SCLKSTOP */ + { 1, 1, 0 }, /* CMU_RESET */ + { 1, 0, 0 }, /* APLL_SYSCLK */ + { 1, 0, 0 }, /* MPLL_SYSCLK */ + { 1, 0, 0 }, /* VPLL_SYSCLK */ + { 1, 1, 0 }, /* EPLL_SYSCLK */ + { 1, 1, 0 }, /* CMU_CLKSTOP_GPS_ALIVE */ + { 1, 1, 0 }, /* CMU_RESET_GPS_ALIVE */ + { 1, 1, 0 }, /* CMU_CLKSTOP_CAM */ + { 1, 1, 0 }, /* CMU_CLKSTOP_TV */ + { 1, 1, 0 }, /* CMU_CLKSTOP_MFC */ + { 1, 1, 0 }, /* CMU_CLKSTOP_G3D */ + { 1, 1, 0 }, /* CMU_CLKSTOP_LCD0 */ + { 1, 1, 0 }, /* CMU_CLKSTOP_LCD1 */ + { 1, 1, 0 }, /* CMU_CLKSTOP_MAUDIO */ + { 1, 1, 0 }, /* CMU_CLKSTOP_GPS */ + { 1, 1, 0 }, /* CMU_RESET_CAM */ + { 1, 1, 0 }, /* CMU_RESET_TV */ + { 1, 1, 0 }, /* CMU_RESET_MFC */ + { 1, 1, 0 }, /* CMU_RESET_G3D */ + { 1, 1, 0 }, /* CMU_RESET_LCD0 */ + { 1, 1, 0 }, /* CMU_RESET_LCD1 */ + { 1, 1, 0 }, /* CMU_RESET_MAUDIO */ + { 1, 1, 0 }, /* CMU_RESET_GPS */ + { 3, 0, 0 }, /* TOP_BUS */ + { 1, 0, 1 }, /* TOP_RETENTION */ + { 3, 0, 3 }, /* TOP_PWR */ + { 1, 1, 0 }, /* LOGIC_RESET */ + { 3, 0, 0 }, /* ONENAND_MEM */ + { 3, 0, 0 }, /* MODIMIF_MEM */ + { 3, 0, 0 }, /* G2D_ACP_MEM */ + { 3, 0, 0 }, /* USBOTG_MEM */ + { 3, 0, 0 }, /* HSMMC_MEM */ + { 3, 0, 0 }, /* CSSYS_MEM */ + { 3, 0, 0 }, /* SECSS_MEM */ + { 3, 0, 0 }, /* PCIE_MEM */ + { 3, 0, 0 }, /* SATA_MEM */ + { 1, 0, 0 }, /* PAD_RETENTION_DRAM */ + { 1, 1, 0 }, /* PAD_RETENTION_MAUDIO */ + { 1, 0, 0 }, /* PAD_RETENTION_GPIO */ + { 1, 0, 0 }, /* PAD_RETENTION_UART */ + { 1, 0, 0 }, /* PAD_RETENTION_MMCA */ + { 1, 0, 0 }, /* PAD_RETENTION_MMCB */ + { 1, 0, 0 }, /* PAD_RETENTION_EBIA */ + { 1, 0, 0 }, /* PAD_RETENTION_EBIB */ + { 1, 0, 0 }, /* PAD_RETENTION_ISOLATION */ + { 1, 0, 0 }, /* PAD_RETENTION_ALV_SEL */ + { 1, 1, 0 }, /* XUSBXTI */ + { 1, 1, 0 }, /* XXTI */ + { 1, 1, 0 }, /* EXT_REGULATOR */ + { 1, 0, 0 }, /* GPIO_MODE */ + { 1, 1, 0 }, /* GPIO_MODE_MAUDIO */ + { 7, 0, 0 }, /* CAM */ + { 7, 0, 0 }, /* TV */ + { 7, 0, 0 }, /* MFC */ + { 7, 0, 0 }, /* G3D */ + { 7, 0, 0 }, /* LCD0 */ + { 7, 0, 0 }, /* LCD1 */ + { 7, 7, 0 }, /* MAUDIO */ + { 7, 0, 0 }, /* GPS */ + { 7, 0, 0 }, /* GPS_ALIVE */ +}; + +void exynos4_sys_powerdown_conf(enum sys_powerdown mode) +{ + unsigned int count = ARRAY_SIZE(sys_powerdown_reg); + + for (; count > 0; count--) + __raw_writel(sys_powerdown_val[count - 1][mode], + sys_powerdown_reg[count - 1]); +} diff --git a/arch/arm/mach-exynos4/time.c b/arch/arm/mach-exynos4/time.c deleted file mode 100644 index ebb8f38d540..00000000000 --- a/arch/arm/mach-exynos4/time.c +++ /dev/null @@ -1,301 +0,0 @@ -/* linux/arch/arm/mach-exynos4/time.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 (and compatible) HRT support - * PWM 2/4 is used for this feature - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/clockchips.h> -#include <linux/platform_device.h> - -#include <asm/smp_twd.h> - -#include <mach/map.h> -#include <plat/regs-timer.h> -#include <asm/mach/time.h> - -static unsigned long clock_count_per_tick; - -static struct clk *tin2; -static struct clk *tin4; -static struct clk *tdiv2; -static struct clk *tdiv4; -static struct clk *timerclk; - -static void exynos4_pwm_stop(unsigned int pwm_id) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - switch (pwm_id) { - case 2: - tcon &= ~S3C2410_TCON_T2START; - break; - case 4: - tcon &= ~S3C2410_TCON_T4START; - break; - default: - break; - } - __raw_writel(tcon, S3C2410_TCON); -} - -static void exynos4_pwm_init(unsigned int pwm_id, unsigned long tcnt) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - /* timers reload after counting zero, so reduce the count by 1 */ - tcnt--; - - /* ensure timer is stopped... */ - switch (pwm_id) { - case 2: - tcon &= ~(0xf<<12); - tcon |= S3C2410_TCON_T2MANUALUPD; - - __raw_writel(tcnt, S3C2410_TCNTB(2)); - __raw_writel(tcnt, S3C2410_TCMPB(2)); - __raw_writel(tcon, S3C2410_TCON); - - break; - case 4: - tcon &= ~(7<<20); - tcon |= S3C2410_TCON_T4MANUALUPD; - - __raw_writel(tcnt, S3C2410_TCNTB(4)); - __raw_writel(tcnt, S3C2410_TCMPB(4)); - __raw_writel(tcon, S3C2410_TCON); - - break; - default: - break; - } -} - -static inline void exynos4_pwm_start(unsigned int pwm_id, bool periodic) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - switch (pwm_id) { - case 2: - tcon |= S3C2410_TCON_T2START; - tcon &= ~S3C2410_TCON_T2MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T2RELOAD; - else - tcon &= ~S3C2410_TCON_T2RELOAD; - break; - case 4: - tcon |= S3C2410_TCON_T4START; - tcon &= ~S3C2410_TCON_T4MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T4RELOAD; - else - tcon &= ~S3C2410_TCON_T4RELOAD; - break; - default: - break; - } - __raw_writel(tcon, S3C2410_TCON); -} - -static int exynos4_pwm_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - exynos4_pwm_init(2, cycles); - exynos4_pwm_start(2, 0); - return 0; -} - -static void exynos4_pwm_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - exynos4_pwm_stop(2); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - exynos4_pwm_init(2, clock_count_per_tick); - exynos4_pwm_start(2, 1); - break; - case CLOCK_EVT_MODE_ONESHOT: - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static struct clock_event_device pwm_event_device = { - .name = "pwm_timer2", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .shift = 32, - .set_next_event = exynos4_pwm_set_next_event, - .set_mode = exynos4_pwm_set_mode, -}; - -irqreturn_t exynos4_clock_event_isr(int irq, void *dev_id) -{ - struct clock_event_device *evt = &pwm_event_device; - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction exynos4_clock_event_irq = { - .name = "pwm_timer2_irq", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = exynos4_clock_event_isr, -}; - -static void __init exynos4_clockevent_init(void) -{ - unsigned long pclk; - unsigned long clock_rate; - struct clk *tscaler; - - pclk = clk_get_rate(timerclk); - - /* configure clock tick */ - - tscaler = clk_get_parent(tdiv2); - - clk_set_rate(tscaler, pclk / 2); - clk_set_rate(tdiv2, pclk / 2); - clk_set_parent(tin2, tdiv2); - - clock_rate = clk_get_rate(tin2); - - clock_count_per_tick = clock_rate / HZ; - - pwm_event_device.mult = - div_sc(clock_rate, NSEC_PER_SEC, pwm_event_device.shift); - pwm_event_device.max_delta_ns = - clockevent_delta2ns(-1, &pwm_event_device); - pwm_event_device.min_delta_ns = - clockevent_delta2ns(1, &pwm_event_device); - - pwm_event_device.cpumask = cpumask_of(0); - clockevents_register_device(&pwm_event_device); - - setup_irq(IRQ_TIMER2, &exynos4_clock_event_irq); -} - -static cycle_t exynos4_pwm4_read(struct clocksource *cs) -{ - return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40)); -} - -#ifdef CONFIG_PM -static void exynos4_pwm4_resume(struct clocksource *cs) -{ - unsigned long pclk; - - pclk = clk_get_rate(timerclk); - - clk_set_rate(tdiv4, pclk / 2); - clk_set_parent(tin4, tdiv4); - - exynos4_pwm_init(4, ~0); - exynos4_pwm_start(4, 1); -} -#endif - -struct clocksource pwm_clocksource = { - .name = "pwm_timer4", - .rating = 250, - .read = exynos4_pwm4_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS , -#ifdef CONFIG_PM - .resume = exynos4_pwm4_resume, -#endif -}; - -static void __init exynos4_clocksource_init(void) -{ - unsigned long pclk; - unsigned long clock_rate; - - pclk = clk_get_rate(timerclk); - - clk_set_rate(tdiv4, pclk / 2); - clk_set_parent(tin4, tdiv4); - - clock_rate = clk_get_rate(tin4); - - exynos4_pwm_init(4, ~0); - exynos4_pwm_start(4, 1); - - if (clocksource_register_hz(&pwm_clocksource, clock_rate)) - panic("%s: can't register clocksource\n", pwm_clocksource.name); -} - -static void __init exynos4_timer_resources(void) -{ - struct platform_device tmpdev; - - tmpdev.dev.bus = &platform_bus_type; - - timerclk = clk_get(NULL, "timers"); - if (IS_ERR(timerclk)) - panic("failed to get timers clock for system timer"); - - clk_enable(timerclk); - - tmpdev.id = 2; - tin2 = clk_get(&tmpdev.dev, "pwm-tin"); - if (IS_ERR(tin2)) - panic("failed to get pwm-tin2 clock for system timer"); - - tdiv2 = clk_get(&tmpdev.dev, "pwm-tdiv"); - if (IS_ERR(tdiv2)) - panic("failed to get pwm-tdiv2 clock for system timer"); - clk_enable(tin2); - - tmpdev.id = 4; - tin4 = clk_get(&tmpdev.dev, "pwm-tin"); - if (IS_ERR(tin4)) - panic("failed to get pwm-tin4 clock for system timer"); - - tdiv4 = clk_get(&tmpdev.dev, "pwm-tdiv"); - if (IS_ERR(tdiv4)) - panic("failed to get pwm-tdiv4 clock for system timer"); - - clk_enable(tin4); -} - -static void __init exynos4_timer_init(void) -{ -#ifdef CONFIG_LOCAL_TIMERS - twd_base = S5P_VA_TWD; -#endif - - exynos4_timer_resources(); - exynos4_clockevent_init(); - exynos4_clocksource_init(); -} - -struct sys_timer exynos4_timer = { - .init = exynos4_timer_init, -}; diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index 5f1f9867fc7..121ad1d4fa3 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -103,6 +103,7 @@ static void __init footbridge_timer_init(void) clockevents_calc_mult_shift(ce, mem_fclk_21285, 5); ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce); ce->min_delta_ns = clockevent_delta2ns(0x000004, ce); + ce->cpumask = cpumask_of(smp_processor_id()); clockevents_register_device(ce); } diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index 30b971d6581..1be2eeb7a0a 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -26,6 +26,7 @@ #include <asm/hardware/debug-8250.S> #else +#include <mach/hardware.h> /* For EBSA285 debugging */ .equ dc21285_high, ARMCSR_BASE & 0xff000000 .equ dc21285_low, ARMCSR_BASE & 0x00ffffff @@ -36,8 +37,8 @@ .else mov \rp, #0 .endif - orr \rv, \rp, #0x42000000 - orr \rp, \rp, #dc21285_high + orr \rv, \rp, #dc21285_high + orr \rp, \rp, #0x42000000 .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-h720x/Kconfig b/arch/arm/mach-h720x/Kconfig index 9b6982efbd2..abf356c0234 100644 --- a/arch/arm/mach-h720x/Kconfig +++ b/arch/arm/mach-h720x/Kconfig @@ -6,12 +6,14 @@ config ARCH_H7201 bool "gms30c7201" depends on ARCH_H720X select CPU_H7201 + select ZONE_DMA help Say Y here if you are using the Hynix GMS30C7201 Reference Board config ARCH_H7202 bool "hms30c7202" select CPU_H7202 + select ZONE_DMA depends on ARCH_H720X help Say Y here if you are using the Hynix HMS30C7202 Reference Board diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 38b95e949d1..63621f152c9 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -23,6 +23,8 @@ #include <linux/io.h> #include <asm/mach/time.h> +#include <asm/hardware/gic.h> + #include <mach/msm_iomap.h> #include <mach/cpu.h> @@ -55,10 +57,12 @@ enum timer_location { #if defined(CONFIG_ARCH_QSD8X50) #define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */ #define MSM_DGT_SHIFT (0) -#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || \ - defined(CONFIG_ARCH_MSM8960) +#elif defined(CONFIG_ARCH_MSM7X30) #define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */ #define MSM_DGT_SHIFT (0) +#elif defined(CONFIG_ARCH_MSM8X60) || defined(CONFIG_ARCH_MSM8960) +#define DGT_HZ (27000000 / 4) /* 27 MHz (PXO) / 4 by default */ +#define MSM_DGT_SHIFT (0) #else #define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */ #define MSM_DGT_SHIFT (5) @@ -100,7 +104,11 @@ static cycle_t msm_read_timer_count(struct clocksource *cs) { struct msm_clock *clk = container_of(cs, struct msm_clock, clocksource); - return readl(clk->global_counter); + /* + * Shift timer count down by a constant due to unreliable lower bits + * on some targets. + */ + return readl(clk->global_counter) >> clk->shift; } static struct msm_clock *clockevent_to_clock(struct clock_event_device *evt) diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c index 65157a35dbb..54add60f94c 100644 --- a/arch/arm/mach-mxs/ocotp.c +++ b/arch/arm/mach-mxs/ocotp.c @@ -16,6 +16,8 @@ #include <linux/err.h> #include <linux/mutex.h> +#include <asm/processor.h> /* for cpu_relax() */ + #include <mach/mxs.h> #define OCOTP_WORD_OFFSET 0x20 diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index af98117043d..5b114d1558c 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -4,14 +4,14 @@ # Common support obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o -obj-y += clock.o clock_data.o opp_data.o reset.o +obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management -obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o +obj-$(CONFIG_PM) += pm.o sleep.o # DSP obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index de88c9297b6..f49ce85d244 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -215,7 +215,7 @@ static struct omap_kp_platform_data ams_delta_kp_data __initdata = { .delay = 9, }; -static struct platform_device ams_delta_kp_device __initdata = { +static struct platform_device ams_delta_kp_device = { .name = "omap-keypad", .id = -1, .dev = { @@ -225,12 +225,12 @@ static struct platform_device ams_delta_kp_device __initdata = { .resource = ams_delta_kp_resources, }; -static struct platform_device ams_delta_lcd_device __initdata = { +static struct platform_device ams_delta_lcd_device = { .name = "lcd_ams_delta", .id = -1, }; -static struct platform_device ams_delta_led_device __initdata = { +static struct platform_device ams_delta_led_device = { .name = "ams-delta-led", .id = -1 }; @@ -267,7 +267,7 @@ static struct soc_camera_link ams_delta_iclink = { .power = ams_delta_camera_power, }; -static struct platform_device ams_delta_camera_device __initdata = { +static struct platform_device ams_delta_camera_device = { .name = "soc-camera-pdrv", .id = 0, .dev = { diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 04c4b04cf54..364137c2042 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -41,7 +41,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { .bank_stride = 1, }; -static struct __initdata platform_device omap15xx_mpu_gpio = { +static struct platform_device omap15xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -70,7 +70,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { .bank_width = 16, }; -static struct __initdata platform_device omap15xx_gpio = { +static struct platform_device omap15xx_gpio = { .name = "omap_gpio", .id = 1, .dev = { diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 5dd0d4c82b2..293a246e282 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -44,7 +44,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { .bank_stride = 1, }; -static struct __initdata platform_device omap16xx_mpu_gpio = { +static struct platform_device omap16xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -73,7 +73,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio1 = { +static struct platform_device omap16xx_gpio1 = { .name = "omap_gpio", .id = 1, .dev = { @@ -102,7 +102,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio2 = { +static struct platform_device omap16xx_gpio2 = { .name = "omap_gpio", .id = 2, .dev = { @@ -131,7 +131,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio3 = { +static struct platform_device omap16xx_gpio3 = { .name = "omap_gpio", .id = 3, .dev = { @@ -160,7 +160,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio4 = { +static struct platform_device omap16xx_gpio4 = { .name = "omap_gpio", .id = 4, .dev = { diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 1204c8b871a..c6ad248d63a 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -46,7 +46,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .bank_stride = 2, }; -static struct __initdata platform_device omap7xx_mpu_gpio = { +static struct platform_device omap7xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -75,7 +75,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio1 = { +static struct platform_device omap7xx_gpio1 = { .name = "omap_gpio", .id = 1, .dev = { @@ -104,7 +104,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio2 = { +static struct platform_device omap7xx_gpio2 = { .name = "omap_gpio", .id = 2, .dev = { @@ -133,7 +133,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio3 = { +static struct platform_device omap7xx_gpio3 = { .name = "omap_gpio", .id = 3, .dev = { @@ -162,7 +162,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio4 = { +static struct platform_device omap7xx_gpio4 = { .name = "omap_gpio", .id = 4, .dev = { @@ -191,7 +191,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio5 = { +static struct platform_device omap7xx_gpio5 = { .name = "omap_gpio", .id = 5, .dev = { @@ -220,7 +220,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio6 = { +static struct platform_device omap7xx_gpio6 = { .name = "omap_gpio", .id = 6, .dev = { diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index fe31d933f0e..334fb8871bc 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -56,9 +56,13 @@ static struct dev_power_domain default_power_domain = { USE_PLATFORM_PM_SLEEP_OPS }, }; +#define OMAP1_PWR_DOMAIN (&default_power_domain) +#else +#define OMAP1_PWR_DOMAIN NULL +#endif /* CONFIG_PM_RUNTIME */ static struct pm_clk_notifier_block platform_bus_notifier = { - .pwr_domain = &default_power_domain, + .pwr_domain = OMAP1_PWR_DOMAIN, .con_ids = { "ick", "fck", NULL, }, }; @@ -72,4 +76,4 @@ static int __init omap1_pm_runtime_init(void) return 0; } core_initcall(omap1_pm_runtime_init); -#endif /* CONFIG_PM_RUNTIME */ + diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2a0bb4818ca..23f71d40883 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -84,7 +84,8 @@ static struct mtd_partition omap3pandora_nand_partitions[] = { static struct omap_nand_platform_data pandora_nand_data = { .cs = 0, - .devsize = 1, /* '0' for 8-bit, '1' for 16-bit device */ + .devsize = NAND_BUSWIDTH_16, + .xfer_type = NAND_OMAP_PREFETCH_DMA, .parts = omap3pandora_nand_partitions, .nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions), }; diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 990366726c5..88bd6f7705f 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -558,7 +558,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = .subdev_board_info = &rx51_si4713_board_info, }; -static struct platform_device rx51_si4713_dev __initdata_or_module = { +static struct platform_device rx51_si4713_dev = { .name = "radio-si4713", .id = -1, .dev = { diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index a5a83b358dd..e01da45c053 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -189,7 +189,7 @@ static struct dentry *pm_dbg_dir; static int pm_dbg_init_done; -static int __init pm_dbg_init(void); +static int pm_dbg_init(void); enum { DEBUG_FILE_COUNTERS = 0, @@ -595,7 +595,7 @@ static int option_set(void *data, u64 val) DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n"); -static int __init pm_dbg_init(void) +static int pm_dbg_init(void) { int i; struct dentry *d; diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 7fe74067d85..094279aefe9 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h index 70a83b209e2..45eea5210c8 100644 --- a/arch/arm/mach-s3c2410/include/mach/pm-core.h +++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h @@ -62,3 +62,6 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) { } + +static inline void s3c_pm_restored_gpios(void) { } +static inline void s3c_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index dd3120df09f..fc2dc0b3d4f 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -552,7 +552,7 @@ struct mini2440_features_t { struct platform_device *optional[8]; }; -static void mini2440_parse_features( +static void __init mini2440_parse_features( struct mini2440_features_t * features, const char * features_str ) { diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 82db072cb83..5e6b42089eb 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -88,6 +88,7 @@ static struct s3c64xx_spi_info s3c64xx_spi0_pdata = { .cfg_gpio = s3c64xx_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, + .tx_st_done = 21, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -132,6 +133,7 @@ static struct s3c64xx_spi_info s3c64xx_spi1_pdata = { .cfg_gpio = s3c64xx_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, + .tx_st_done = 21, }; struct platform_device s3c64xx_device_spi1 = { diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h index 8e2df26cf14..bf7cc82ea6d 100644 --- a/arch/arm/mach-s3c64xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h @@ -215,6 +215,7 @@ /* Compatibility */ #define IRQ_ONENAND IRQ_ONENAND0 +#define IRQ_I2S0 IRQ_S3C6410_IIS #endif /* __ASM_MACH_S3C64XX_IRQS_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h index 1e9f20f0bb7..38659bebe4b 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -53,7 +53,7 @@ static inline void s3c_pm_arch_show_resume_irqs(void) * the IRQ wake controls depending on the CPU we are running on */ #define s3c_irqwake_eintallow ((1 << 28) - 1) -#define s3c_irqwake_intallow (0) +#define s3c_irqwake_intallow (~0) static inline void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) @@ -96,3 +96,20 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, save->ucon = new_ucon; } } + +static inline void s3c_pm_restored_gpios(void) +{ + /* ensure sleep mode has been cleared from the system */ + + __raw_writel(0, S3C64XX_SLPEN); +} + +static inline void s3c_pm_saved_gpios(void) +{ + /* turn on the sleep mode and keep it there, as it seems that during + * suspend the xCON registers get re-set and thus you can end up with + * problems between going to sleep and resuming. + */ + + __raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN); +} diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c index 97660c8141a..75d9a0e4919 100644 --- a/arch/arm/mach-s3c64xx/irq.c +++ b/arch/arm/mach-s3c64xx/irq.c @@ -48,14 +48,22 @@ static struct s3c_uart_irq uart_irqs[] = { }, }; +/* setup the sources the vic should advertise resume for, even though it + * is not doing the wake (set_irq_wake needs to be valid) */ +#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE)) +#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \ + 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \ + 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \ + 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \ + 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE)) void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) { printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); /* initialise the pair of VICs */ - vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, 0); - vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0); + vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME); + vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME); /* add the timer sub-irqs */ s3c_init_vic_timer_irq(5, IRQ_TIMER0); diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c index e78ee18c76e..ac825e82632 100644 --- a/arch/arm/mach-s5p64x0/dev-spi.c +++ b/arch/arm/mach-s5p64x0/dev-spi.c @@ -112,12 +112,14 @@ static struct s3c64xx_spi_info s5p6440_spi0_pdata = { .cfg_gpio = s5p6440_spi_cfg_gpio, .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static struct s3c64xx_spi_info s5p6450_spi0_pdata = { .cfg_gpio = s5p6450_spi_cfg_gpio, .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -160,12 +162,14 @@ static struct s3c64xx_spi_info s5p6440_spi1_pdata = { .cfg_gpio = s5p6440_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static struct s3c64xx_spi_info s5p6450_spi1_pdata = { .cfg_gpio = s5p6450_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, + .tx_st_done = 25, }; struct platform_device s5p64x0_device_spi1 = { diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h index 513abffc760..5837a36ece8 100644 --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h @@ -85,6 +85,8 @@ #define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4 #define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5 +#define IRQ_I2S0 IRQ_I2SV40 + /* S5P6450 EINT feature will be added */ /* diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c index 57b19794d9b..e5d6c4dceb5 100644 --- a/arch/arm/mach-s5pc100/dev-spi.c +++ b/arch/arm/mach-s5pc100/dev-spi.c @@ -15,6 +15,7 @@ #include <mach/dma.h> #include <mach/map.h> #include <mach/spi-clocks.h> +#include <mach/irqs.h> #include <plat/s3c64xx-spi.h> #include <plat/gpio-cfg.h> @@ -90,6 +91,7 @@ static struct s3c64xx_spi_info s5pc100_spi0_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -134,6 +136,7 @@ static struct s3c64xx_spi_info s5pc100_spi1_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; struct platform_device s5pc100_device_spi1 = { @@ -176,6 +179,7 @@ static struct s3c64xx_spi_info s5pc100_spi2_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; struct platform_device s5pc100_device_spi2 = { diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 61e6c24b90a..79907ec78d4 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -126,7 +126,7 @@ void __init s5pv210_map_io(void) s5pv210_default_sdhci2(); s5pv210_default_sdhci3(); - s3c_adc_setname("s3c64xx-adc"); + s3c_adc_setname("samsung-adc-v3"); s3c_cfcon_setname("s5pv210-pata"); diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c index 8d58f192624..63f5d82004b 100644 --- a/arch/arm/mach-s5pv210/dev-audio.c +++ b/arch/arm/mach-s5pv210/dev-audio.c @@ -18,6 +18,7 @@ #include <mach/map.h> #include <mach/dma.h> #include <mach/irqs.h> +#include <mach/regs-audss.h> static const char *rclksrc[] = { [0] = "busclk", @@ -52,6 +53,7 @@ static struct s3c_audio_pdata i2sv5_pdata = { .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, .src_clk = rclksrc, + .idma_addr = S5PV210_AUDSS_INT_MEM, }, }, }; diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c index e3249a47e3b..eaf9a7bff7a 100644 --- a/arch/arm/mach-s5pv210/dev-spi.c +++ b/arch/arm/mach-s5pv210/dev-spi.c @@ -85,6 +85,7 @@ static struct s3c64xx_spi_info s5pv210_spi0_pdata = { .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, .high_speed = 1, + .tx_st_done = 25, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -129,6 +130,7 @@ static struct s3c64xx_spi_info s5pv210_spi1_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, .high_speed = 1, + .tx_st_done = 25, }; struct platform_device s5pv210_device_spi1 = { diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h index e8d394f8b05..3e22109e1b7 100644 --- a/arch/arm/mach-s5pv210/include/mach/pm-core.h +++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h @@ -41,3 +41,6 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, { /* nothing here yet */ } + +static inline void s3c_pm_restored_gpios(void) { } +static inline void s3c_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s5pv210/include/mach/regs-audss.h b/arch/arm/mach-s5pv210/include/mach/regs-audss.h new file mode 100644 index 00000000000..eacc1f79080 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/regs-audss.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-s5pv210/include/mach/regs-audss.h + * + * Copyright (c) 2011 Samsung Electronics + * http://www.samsung.com + * + * S5PV210 Audio SubSystem clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_REGS_AUDSS_H +#define __PLAT_REGS_AUDSS_H __FILE__ + +#define S5PV210_AUDSS_INT_MEM (0xC0000000) + +#endif /* _PLAT_REGS_AUDSS_H */ diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index c6a9e86c2d5..c6900f8bf3c 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -267,6 +267,7 @@ static struct platform_device *smdkv210_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_spdif, &samsung_asoc_dma, + &samsung_asoc_idma, &samsung_device_keypad, &smdkv210_dm9000, &smdkv210_lcd_lte480wv, diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index c95258c274c..ce5c2513c6c 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -381,11 +381,9 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) gpio_set_value(GPIO_PORT114, state); } -static struct sh_mobile_sdhi_info sh_sdhi1_platdata = { - .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, +static struct sh_mobile_sdhi_info sh_sdhi1_info = { .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, - .tmio_caps = MMC_CAP_NONREMOVABLE, + .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .set_pwr = ag5evm_sdhi1_set_pwr, }; @@ -415,7 +413,7 @@ static struct platform_device sdhi1_device = { .name = "sh_mobile_sdhi", .id = 1, .dev = { - .platform_data = &sh_sdhi1_platdata, + .platform_data = &sh_sdhi1_info, }, .num_resources = ARRAY_SIZE(sdhi1_resources), .resource = sdhi1_resources, diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index f6b687f61c2..803bc6edfca 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -913,7 +913,7 @@ static struct i2c_board_info imx074_info = { I2C_BOARD_INFO("imx074", 0x1a), }; -struct soc_camera_link imx074_link = { +static struct soc_camera_link imx074_link = { .bus_id = 0, .board_info = &imx074_info, .i2c_adapter_id = 0, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 776f20560e7..3802f2afabe 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -126,7 +126,7 @@ * ------+--------------------+--------------------+------- * IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low * IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High - * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Tuch Panel | Low + * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Touch Panel | Low * IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low * IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High @@ -165,10 +165,10 @@ * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. * But don't select both drivers in same time. * These uses same IRQ number for request_irq(), and aren't supporting - * IRQF_SHARD / IORESOURCE_IRQ_SHAREABLE. + * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. * * Actually these are old/new version of USB driver. - * This mean its register will be broken if it supports SHARD IRQ, + * This mean its register will be broken if it supports shared IRQ, */ /* @@ -562,7 +562,121 @@ out: clk_put(hdmi_ick); } -/* USB1 (Host) */ +/* USBHS0 is connected to CN22 which takes a USB Mini-B plug + * + * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug, + * but on this particular board IRQ7 is already used by + * the touch screen. This leaves us with software polling. + */ +#define USBHS0_POLL_INTERVAL (HZ * 5) + +struct usbhs_private { + unsigned int usbphyaddr; + unsigned int usbcrcaddr; + struct renesas_usbhs_platform_info info; + struct delayed_work work; + struct platform_device *pdev; +}; + +#define usbhs_get_priv(pdev) \ + container_of(renesas_usbhs_get_info(pdev), \ + struct usbhs_private, info) + +#define usbhs_is_connected(priv) \ + (!((1 << 7) & __raw_readw(priv->usbcrcaddr))) + +static int usbhs_get_vbus(struct platform_device *pdev) +{ + return usbhs_is_connected(usbhs_get_priv(pdev)); +} + +static void usbhs_phy_reset(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + /* init phy */ + __raw_writew(0x8a0a, priv->usbcrcaddr); +} + +static int usbhs0_get_id(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + +static void usbhs0_work_function(struct work_struct *work) +{ + struct usbhs_private *priv = container_of(work, struct usbhs_private, + work.work); + + renesas_usbhs_call_notify_hotplug(priv->pdev); + schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL); +} + +static int usbhs0_hardware_init(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + priv->pdev = pdev; + INIT_DELAYED_WORK(&priv->work, usbhs0_work_function); + schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL); + return 0; +} + +static void usbhs0_hardware_exit(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + cancel_delayed_work_sync(&priv->work); +} + +static struct usbhs_private usbhs0_private = { + .usbcrcaddr = 0xe605810c, /* USBCR2 */ + .info = { + .platform_callback = { + .hardware_init = usbhs0_hardware_init, + .hardware_exit = usbhs0_hardware_exit, + .phy_reset = usbhs_phy_reset, + .get_id = usbhs0_get_id, + .get_vbus = usbhs_get_vbus, + }, + .driver_param = { + .buswait_bwait = 4, + }, + }, +}; + +static struct resource usbhs0_resources[] = { + [0] = { + .name = "USBHS0", + .start = 0xe6890000, + .end = 0xe68900e6 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x1ca0) /* USB0_USB0I0 */, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbhs0_device = { + .name = "renesas_usbhs", + .id = 0, + .dev = { + .platform_data = &usbhs0_private.info, + }, + .num_resources = ARRAY_SIZE(usbhs0_resources), + .resource = usbhs0_resources, +}; + +/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug + * + * Use J30 to select between Host and Function. This setting + * can however not be detected by software. Hotplug of USBHS1 + * is provided via IRQ8. + */ +#define IRQ8 evt2irq(0x0300) + +/* USBHS1 USB Host support via r8a66597_hcd */ static void usb1_host_port_power(int port, int power) { if (!power) /* only power-on is supported for now */ @@ -579,9 +693,9 @@ static struct r8a66597_platdata usb1_host_data = { static struct resource usb1_host_resources[] = { [0] = { - .name = "USBHS", - .start = 0xE68B0000, - .end = 0xE68B00E6 - 1, + .name = "USBHS1", + .start = 0xe68b0000, + .end = 0xe68b00e6 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -602,37 +716,14 @@ static struct platform_device usb1_host_device = { .resource = usb1_host_resources, }; -/* USB1 (Function) */ +/* USBHS1 USB Function support via renesas_usbhs */ + #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) #define USB_PHY_OFF (1 << 0) #define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF) -struct usbhs_private { - unsigned int irq; - unsigned int usbphyaddr; - unsigned int usbcrcaddr; - struct renesas_usbhs_platform_info info; -}; - -#define usbhs_get_priv(pdev) \ - container_of(renesas_usbhs_get_info(pdev), \ - struct usbhs_private, info) - -#define usbhs_is_connected(priv) \ - (!((1 << 7) & __raw_readw(priv->usbcrcaddr))) - -static int usbhs1_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -static int usbhs1_get_vbus(struct platform_device *pdev) -{ - return usbhs_is_connected(usbhs_get_priv(pdev)); -} - static irqreturn_t usbhs1_interrupt(int irq, void *data) { struct platform_device *pdev = data; @@ -654,12 +745,10 @@ static int usbhs1_hardware_init(struct platform_device *pdev) struct usbhs_private *priv = usbhs_get_priv(pdev); int ret; - irq_set_irq_type(priv->irq, IRQ_TYPE_LEVEL_HIGH); - /* clear interrupt status */ __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); - ret = request_irq(priv->irq, usbhs1_interrupt, 0, + ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH, dev_name(&pdev->dev), pdev); if (ret) { dev_err(&pdev->dev, "request_irq err\n"); @@ -679,15 +768,12 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) /* clear interrupt status */ __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); - free_irq(priv->irq, pdev); + free_irq(IRQ8, pdev); } -static void usbhs1_phy_reset(struct platform_device *pdev) +static int usbhs1_get_id(struct platform_device *pdev) { - struct usbhs_private *priv = usbhs_get_priv(pdev); - - /* init phy */ - __raw_writew(0x8a0a, priv->usbcrcaddr); + return USBHS_GADGET; } static u32 usbhs1_pipe_cfg[] = { @@ -710,16 +796,15 @@ static u32 usbhs1_pipe_cfg[] = { }; static struct usbhs_private usbhs1_private = { - .irq = evt2irq(0x0300), /* IRQ8 */ - .usbphyaddr = 0xE60581E2, /* USBPHY1INTAP */ - .usbcrcaddr = 0xE6058130, /* USBCR4 */ + .usbphyaddr = 0xe60581e2, /* USBPHY1INTAP */ + .usbcrcaddr = 0xe6058130, /* USBCR4 */ .info = { .platform_callback = { .hardware_init = usbhs1_hardware_init, .hardware_exit = usbhs1_hardware_exit, - .phy_reset = usbhs1_phy_reset, .get_id = usbhs1_get_id, - .get_vbus = usbhs1_get_vbus, + .phy_reset = usbhs_phy_reset, + .get_vbus = usbhs_get_vbus, }, .driver_param = { .buswait_bwait = 4, @@ -731,9 +816,9 @@ static struct usbhs_private usbhs1_private = { static struct resource usbhs1_resources[] = { [0] = { - .name = "USBHS", - .start = 0xE68B0000, - .end = 0xE68B00E6 - 1, + .name = "USBHS1", + .start = 0xe68b0000, + .end = 0xe68b00e6 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -752,7 +837,6 @@ static struct platform_device usbhs1_device = { .resource = usbhs1_resources, }; - /* LED */ static struct gpio_led mackerel_leds[] = { { @@ -1205,6 +1289,7 @@ static struct platform_device *mackerel_devices[] __initdata = { &lcdc_device, &usb1_host_device, &usbhs1_device, + &usbhs0_device, &leds_device, &fsi_device, &fsi_ak4643_device, @@ -1301,6 +1386,7 @@ static void __init mackerel_map_io(void) #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A +#define GPIO_PORT167CR 0xE60520A7 #define GPIO_PORT168CR 0xE60520A8 #define SRCR4 0xe61580bc #define USCCR1 0xE6058144 @@ -1354,17 +1440,17 @@ static void __init mackerel_init(void) gpio_request(GPIO_PORT151, NULL); /* LCDDON */ gpio_direction_output(GPIO_PORT151, 1); - /* USB enable */ - gpio_request(GPIO_FN_VBUS0_1, NULL); - gpio_request(GPIO_FN_IDIN_1_18, NULL); - gpio_request(GPIO_FN_PWEN_1_115, NULL); - gpio_request(GPIO_FN_OVCN_1_114, NULL); - gpio_request(GPIO_FN_EXTLP_1, NULL); - gpio_request(GPIO_FN_OVCN2_1, NULL); - gpio_pull_down(GPIO_PORT168CR); - - /* setup USB phy */ - __raw_writew(0x8a0a, 0xE6058130); /* USBCR4 */ + /* USBHS0 */ + gpio_request(GPIO_FN_VBUS0_0, NULL); + gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */ + + /* USBHS1 */ + gpio_request(GPIO_FN_VBUS0_1, NULL); + gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ + gpio_request(GPIO_FN_IDIN_1_113, NULL); + + /* USB phy tweak to make the r8a66597_hcd host driver work */ + __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 5d0e1503ece..a911a60e771 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -250,6 +250,11 @@ static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id) return IRQ_HANDLED; } +static int sh73a0_set_wake(struct irq_data *data, unsigned int on) +{ + return 0; /* always allow wakeup */ +} + void __init sh73a0_init_irq(void) { void __iomem *gic_dist_base = __io(0xf0001000); @@ -257,6 +262,7 @@ void __init sh73a0_init_irq(void) void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); gic_init(0, 29, gic_dist_base, gic_cpu_base); + gic_arch_extn.irq_set_wake = sh73a0_set_wake; register_intc_controller(&intcs_desc); diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c index 2c10190dbb5..e546017f15d 100644 --- a/arch/arm/mach-shmobile/setup-sh7367.c +++ b/arch/arm/mach-shmobile/setup-sh7367.c @@ -38,7 +38,7 @@ static struct plat_sci_port scif0_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc00), evt2irq(0xc00), evt2irq(0xc00), evt2irq(0xc00) }, }; @@ -57,7 +57,7 @@ static struct plat_sci_port scif1_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc20), evt2irq(0xc20), evt2irq(0xc20), evt2irq(0xc20) }, }; @@ -76,7 +76,7 @@ static struct plat_sci_port scif2_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc40), evt2irq(0xc40), evt2irq(0xc40), evt2irq(0xc40) }, }; @@ -95,7 +95,7 @@ static struct plat_sci_port scif3_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc60), evt2irq(0xc60), evt2irq(0xc60), evt2irq(0xc60) }, }; @@ -114,7 +114,7 @@ static struct plat_sci_port scif4_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xd20), evt2irq(0xd20), evt2irq(0xd20), evt2irq(0xd20) }, }; @@ -133,7 +133,7 @@ static struct plat_sci_port scif5_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xd40), evt2irq(0xd40), evt2irq(0xd40), evt2irq(0xd40) }, }; @@ -152,7 +152,7 @@ static struct plat_sci_port scif6_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFB, .irqs = { evt2irq(0xd60), evt2irq(0xd60), evt2irq(0xd60), evt2irq(0xd60) }, }; diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h index c34f3ea3017..4f50ca8f901 100644 --- a/arch/arm/mach-u300/clock.h +++ b/arch/arm/mach-u300/clock.h @@ -31,7 +31,7 @@ struct clk { bool reset; __u16 clk_val; __s8 usecount; - __u32 res_reg; + void __iomem * res_reg; __u16 res_mask; bool hw_ctrld; diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 8b85df4c8d8..035fdc9dbdb 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -18,6 +18,12 @@ * the defines are used for setting up the I/O memory mapping. */ +#ifdef __ASSEMBLER__ +#define IOMEM(a) (a) +#else +#define IOMEM(a) (void __iomem *) a +#endif + /* NAND Flash CS0 */ #define U300_NAND_CS0_PHYS_BASE 0x80000000 @@ -48,13 +54,6 @@ #endif /* - * All the following peripherals are specified at their PHYSICAL address, - * so if you need to access them (in the kernel), you MUST use the macros - * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST() - * etc. - */ - -/* * AHB peripherals */ @@ -63,11 +62,11 @@ /* Vectored Interrupt Controller 0, servicing 32 interrupts */ #define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000) -#define U300_INTCON0_VBASE (U300_AHB_PER_VIRT_BASE+0x1000) +#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000) /* Vectored Interrupt Controller 1, servicing 32 interrupts */ #define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000) -#define U300_INTCON1_VBASE (U300_AHB_PER_VIRT_BASE+0x2000) +#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000) /* Memory Stick Pro (MSPRO) controller */ #define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000) @@ -115,7 +114,7 @@ /* SYSCON */ #define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000) -#define U300_SYSCON_VBASE (U300_SLOW_PER_VIRT_BASE+0x1000) +#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000) /* Watchdog */ #define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000) @@ -125,7 +124,7 @@ /* APP side special timer */ #define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000) -#define U300_TIMER_APP_VBASE (U300_SLOW_PER_VIRT_BASE+0x4000) +#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000) /* Keypad */ #define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000) @@ -181,5 +180,4 @@ * Virtual accessor macros for static devices */ - #endif diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 891cf44591e..18d7fa0603c 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -411,8 +411,7 @@ static void __init u300_timer_init(void) /* Use general purpose timer 2 as clock source */ if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC, "GPT2", rate, 300, 32, clocksource_mmio_readl_up)) - printk(KERN_ERR "timer: failed to initialize clock " - "source %s\n", clocksource_u300_1mhz.name); + pr_err("timer: failed to initialize U300 clock source\n"); clockevents_calc_mult_shift(&clockevent_u300_1mhz, rate, APPTIMER_MIN_RANGE); diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index fd4cf1ca5ef..70cdbd60596 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -110,10 +110,18 @@ static pin_cfg_t mop500_pins_common[] = { GPIO168_KP_O0, /* UART */ - GPIO0_U0_CTSn | PIN_INPUT_PULLUP, - GPIO1_U0_RTSn | PIN_OUTPUT_HIGH, - GPIO2_U0_RXD | PIN_INPUT_PULLUP, - GPIO3_U0_TXD | PIN_OUTPUT_HIGH, + /* uart-0 pins gpio configuration should be + * kept intact to prevent glitch in tx line + * when tty dev is opened. Later these pins + * are configured to uart mop500_pins_uart0 + * + * It will be replaced with uart configuration + * once the issue is solved. + */ + GPIO0_GPIO | PIN_INPUT_PULLUP, + GPIO1_GPIO | PIN_OUTPUT_HIGH, + GPIO2_GPIO | PIN_INPUT_PULLUP, + GPIO3_GPIO | PIN_OUTPUT_HIGH, GPIO29_U2_RXD | PIN_INPUT_PULLUP, GPIO30_U2_TXD | PIN_OUTPUT_HIGH, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index bb26f40493e..2a08c07dec6 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -27,18 +27,21 @@ #include <linux/leds-lp5521.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/delay.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <plat/i2c.h> #include <plat/ste_dma40.h> +#include <plat/pincfg.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> #include <mach/irqs.h> +#include "pins-db8500.h" #include "ste-dma40-db8500.h" #include "devices-db8500.h" #include "board-mop500.h" @@ -393,12 +396,63 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = { }; #endif + +static pin_cfg_t mop500_pins_uart0[] = { + GPIO0_U0_CTSn | PIN_INPUT_PULLUP, + GPIO1_U0_RTSn | PIN_OUTPUT_HIGH, + GPIO2_U0_RXD | PIN_INPUT_PULLUP, + GPIO3_U0_TXD | PIN_OUTPUT_HIGH, +}; + +#define PRCC_K_SOFTRST_SET 0x18 +#define PRCC_K_SOFTRST_CLEAR 0x1C +static void ux500_uart0_reset(void) +{ + void __iomem *prcc_rst_set, *prcc_rst_clr; + + prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + + PRCC_K_SOFTRST_SET); + prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + + PRCC_K_SOFTRST_CLEAR); + + /* Activate soft reset PRCC_K_SOFTRST_CLEAR */ + writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr); + udelay(1); + + /* Release soft reset PRCC_K_SOFTRST_SET */ + writel((readl(prcc_rst_set) | 0x1), prcc_rst_set); + udelay(1); +} + +static void ux500_uart0_init(void) +{ + int ret; + + ret = nmk_config_pins(mop500_pins_uart0, + ARRAY_SIZE(mop500_pins_uart0)); + if (ret < 0) + pr_err("pl011: uart pins_enable failed\n"); +} + +static void ux500_uart0_exit(void) +{ + int ret; + + ret = nmk_config_pins_sleep(mop500_pins_uart0, + ARRAY_SIZE(mop500_pins_uart0)); + if (ret < 0) + pr_err("pl011: uart pins_disable failed\n"); +} + static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif + .init = ux500_uart0_init, + .exit = ux500_uart0_exit, + .reset = ux500_uart0_reset, }; static struct amba_pl011_data uart1_plat = { diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 285edcd2da2..9e6b93b1a04 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -46,12 +46,6 @@ static struct map_desc v2m_io_desc[] __initdata = { }, }; -static void __init v2m_init_early(void) -{ - ct_desc->init_early(); - versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); -} - static void __init v2m_timer_init(void) { u32 scctrl; @@ -365,6 +359,13 @@ static struct clk_lookup v2m_lookups[] = { }, }; +static void __init v2m_init_early(void) +{ + ct_desc->init_early(); + clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups)); + versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); +} + static void v2m_power_off(void) { if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0)) @@ -418,8 +419,6 @@ static void __init v2m_init(void) { int i; - clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups)); - platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); platform_device_register(&v2m_flash_device); diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c index 245140c0df1..642de0408f2 100644 --- a/arch/arm/mach-vt8500/irq.c +++ b/arch/arm/mach-vt8500/irq.c @@ -39,9 +39,10 @@ static void __iomem *ic_regbase; static void __iomem *sic_regbase; -static void vt8500_irq_mask(unsigned int irq) +static void vt8500_irq_mask(struct irq_data *d) { void __iomem *base = ic_regbase; + unsigned irq = d->irq; u8 edge; if (irq >= 64) { @@ -64,9 +65,10 @@ static void vt8500_irq_mask(unsigned int irq) } } -static void vt8500_irq_unmask(unsigned int irq) +static void vt8500_irq_unmask(struct irq_data *d) { void __iomem *base = ic_regbase; + unsigned irq = d->irq; u8 dctr; if (irq >= 64) { @@ -78,10 +80,11 @@ static void vt8500_irq_unmask(unsigned int irq) writeb(dctr, base + VT8500_IC_DCTR + irq); } -static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type) +static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type) { void __iomem *base = ic_regbase; - unsigned int orig_irq = irq; + unsigned irq = d->irq; + unsigned orig_irq = irq; u8 dctr; if (irq >= 64) { @@ -114,11 +117,11 @@ static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type) } static struct irq_chip vt8500_irq_chip = { - .name = "vt8500", - .ack = vt8500_irq_mask, - .mask = vt8500_irq_mask, - .unmask = vt8500_irq_unmask, - .set_type = vt8500_irq_set_type, + .name = "vt8500", + .irq_ack = vt8500_irq_mask, + .irq_mask = vt8500_irq_mask, + .irq_unmask = vt8500_irq_unmask, + .irq_set_type = vt8500_irq_set_type, }; void __init vt8500_init_irq(void) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index ef59099a546..44c086710d2 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -120,17 +120,22 @@ static void l2x0_cache_sync(void) spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_flush_all(void) +static void __l2x0_flush_all(void) { - unsigned long flags; - - /* clean all ways */ - spin_lock_irqsave(&l2x0_lock, flags); debug_writel(0x03); writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY); cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask); cache_sync(); debug_writel(0x00); +} + +static void l2x0_flush_all(void) +{ + unsigned long flags; + + /* clean all ways */ + spin_lock_irqsave(&l2x0_lock, flags); + __l2x0_flush_all(); spin_unlock_irqrestore(&l2x0_lock, flags); } @@ -266,7 +271,9 @@ static void l2x0_disable(void) unsigned long flags; spin_lock_irqsave(&l2x0_lock, flags); - writel(0, l2x0_base + L2X0_CTRL); + __l2x0_flush_all(); + writel_relaxed(0, l2x0_base + L2X0_CTRL); + dsb(); spin_unlock_irqrestore(&l2x0_lock, flags); } diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 8bfae964b13..b0ee9ba3cfa 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -24,7 +24,9 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm); /* * We fork()ed a process, and we need a new context for the child - * to run in. + * to run in. We reserve version 0 for initial tasks so we will + * always allocate an ASID. The ASID 0 is reserved for the TTBR + * register changing sequence. */ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) { @@ -34,11 +36,8 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) static void flush_context(void) { - u32 ttb; - /* Copy TTBR1 into TTBR0 */ - asm volatile("mrc p15, 0, %0, c2, c0, 1\n" - "mcr p15, 0, %0, c2, c0, 0" - : "=r" (ttb)); + /* set the reserved ASID before flushing the TLB */ + asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0)); isb(); local_flush_tlb_all(); if (icache_is_vivt_asid_tagged()) { @@ -94,7 +93,7 @@ static void reset_context(void *info) return; smp_rmb(); - asid = cpu_last_asid + cpu; + asid = cpu_last_asid + cpu + 1; flush_context(); set_mm_context(mm, asid); @@ -144,13 +143,13 @@ void __new_context(struct mm_struct *mm) * to start a new version and flush the TLB. */ if (unlikely((asid & ~ASID_MASK) == 0)) { - asid = cpu_last_asid + smp_processor_id(); + asid = cpu_last_asid + smp_processor_id() + 1; flush_context(); #ifdef CONFIG_SMP smp_wmb(); smp_call_function(reset_context, NULL, 1); #endif - cpu_last_asid += NR_CPUS - 1; + cpu_last_asid += NR_CPUS; } set_mm_context(mm, asid); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 2c2cce9cd8c..c19571c40a2 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -331,6 +331,12 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) #endif #ifdef CONFIG_BLK_DEV_INITRD if (phys_initrd_size && + !memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) { + pr_err("INITRD: 0x%08lx+0x%08lx is not a memory region - disabling initrd\n", + phys_initrd_start, phys_initrd_size); + phys_initrd_start = phys_initrd_size = 0; + } + if (phys_initrd_size && memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) { pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n", phys_initrd_start, phys_initrd_size); @@ -635,7 +641,8 @@ void __init mem_init(void) " modules : 0x%08lx - 0x%08lx (%4ld MB)\n" " .init : 0x%p" " - 0x%p" " (%4d kB)\n" " .text : 0x%p" " - 0x%p" " (%4d kB)\n" - " .data : 0x%p" " - 0x%p" " (%4d kB)\n", + " .data : 0x%p" " - 0x%p" " (%4d kB)\n" + " .bss : 0x%p" " - 0x%p" " (%4d kB)\n", MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) + (PAGE_SIZE)), @@ -657,7 +664,8 @@ void __init mem_init(void) MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_text, _etext), - MLK_ROUNDUP(_sdata, _edata)); + MLK_ROUNDUP(_sdata, _edata), + MLK_ROUNDUP(__bss_start, __bss_stop)); #undef MLK #undef MLM diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 9d9e736c2b4..594d677b92c 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -759,7 +759,7 @@ early_param("vmalloc", early_vmalloc); static phys_addr_t lowmem_limit __initdata = 0; -static void __init sanity_check_meminfo(void) +void __init sanity_check_meminfo(void) { int i, j, highmem = 0; @@ -1032,8 +1032,9 @@ void __init paging_init(struct machine_desc *mdesc) { void *zero_page; + memblock_set_current_limit(lowmem_limit); + build_mem_type_table(); - sanity_check_meminfo(); prepare_page_table(); map_lowmem(); devicemaps_init(mdesc); diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 687d02319a4..941a98c9e8a 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -27,6 +27,10 @@ void __init arm_mm_memblock_reserve(void) memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE); } +void __init sanity_check_meminfo(void) +{ +} + /* * paging_init() sets up the page tables, initialises the zone memory * maps, and sets up the zero page, bad page and bad page tables. diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index e4c165ca669..537ffcb0646 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -146,7 +146,7 @@ __arm7tdmi_proc_info: .long 0 .long 0 .long v4_cache_fns - .size __arm7tdmi_proc_info, . - __arm7dmi_proc_info + .size __arm7tdmi_proc_info, . - __arm7tdmi_proc_info .type __triscenda7_proc_info, #object __triscenda7_proc_info: diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 7b7ebd4d096..546b54da100 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -116,7 +116,7 @@ __arm9tdmi_proc_info: .long 0 .long 0 .long v4_cache_fns - .size __arm9tdmi_proc_info, . - __arm9dmi_proc_info + .size __arm9tdmi_proc_info, . - __arm9tdmi_proc_info .type __p2001_proc_info, #object __p2001_proc_info: diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index b3b566ec83d..089c0b5e454 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -108,16 +108,18 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif - mrc p15, 0, r2, c2, c0, 1 @ load TTB 1 - mcr p15, 0, r2, c2, c0, 0 @ into TTB 0 +#ifdef CONFIG_ARM_ERRATA_754322 + dsb +#endif + mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID + isb +1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 isb #ifdef CONFIG_ARM_ERRATA_754322 dsb #endif mcr p15, 0, r1, c13, c0, 1 @ set context ID isb - mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 - isb #endif mov pc, lr ENDPROC(cpu_v7_switch_mm) @@ -208,19 +210,21 @@ cpu_v7_name: /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size -.equ cpu_v7_suspend_size, 4 * 8 +.equ cpu_v7_suspend_size, 4 * 9 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_v7_do_suspend) stmfd sp!, {r4 - r11, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID mrc p15, 0, r5, c13, c0, 1 @ Context ID + mrc p15, 0, r6, c13, c0, 3 @ User r/o thread ID + stmia r0!, {r4 - r6} mrc p15, 0, r6, c3, c0, 0 @ Domain ID mrc p15, 0, r7, c2, c0, 0 @ TTB 0 mrc p15, 0, r8, c2, c0, 1 @ TTB 1 mrc p15, 0, r9, c1, c0, 0 @ Control register mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control - stmia r0, {r4 - r11} + stmia r0, {r6 - r11} ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_v7_do_suspend) @@ -228,9 +232,11 @@ ENTRY(cpu_v7_do_resume) mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache - ldmia r0, {r4 - r11} + ldmia r0!, {r4 - r6} mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID mcr p15, 0, r5, c13, c0, 1 @ Context ID + mcr p15, 0, r6, c13, c0, 3 @ User r/o thread ID + ldmia r0, {r6 - r11} mcr p15, 0, r6, c3, c0, 0 @ Domain ID mcr p15, 0, r7, c2, c0, 0 @ TTB 0 mcr p15, 0, r8, c2, c0, 1 @ TTB 1 @@ -416,9 +422,9 @@ ENTRY(v7_processor_functions) .word cpu_v7_dcache_clean_area .word cpu_v7_switch_mm .word cpu_v7_set_pte_ext - .word 0 - .word 0 - .word 0 + .word cpu_v7_suspend_size + .word cpu_v7_do_suspend + .word cpu_v7_do_resume .size v7_processor_functions, . - v7_processor_functions .section ".rodata" diff --git a/arch/arm/plat-iop/cp6.c b/arch/arm/plat-iop/cp6.c index 9612a87e2a8..bab73e2c79d 100644 --- a/arch/arm/plat-iop/cp6.c +++ b/arch/arm/plat-iop/cp6.c @@ -18,6 +18,7 @@ */ #include <linux/init.h> #include <asm/traps.h> +#include <asm/ptrace.h> static int cp6_trap(struct pt_regs *regs, unsigned int instr) { diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c index 3538b85ede9..b130f60ca6b 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -139,7 +139,7 @@ static struct sdma_script_start_addrs addr_imx35_to2 = { #endif #ifdef CONFIG_SOC_IMX51 -static struct sdma_script_start_addrs addr_imx51_to1 = { +static struct sdma_script_start_addrs addr_imx51 = { .ap_2_ap_addr = 642, .uart_2_mcu_addr = 817, .mcu_2_app_addr = 747, @@ -196,7 +196,9 @@ static int __init imxXX_add_imx_dma(void) #if defined(CONFIG_SOC_IMX51) if (cpu_is_mx51()) { - imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1; + int to_version = mx51_revision() >> 4; + imx51_imx_sdma_data.pdata.to_version = to_version; + imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51; ret = imx_add_imx_sdma(&imx51_imx_sdma_data); } else #endif diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index a37b8eb65b7..49fc0df0c21 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -84,6 +84,7 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/pm_runtime.h> #include <plat/omap_device.h> #include <plat/omap_hwmod.h> @@ -539,20 +540,34 @@ int omap_early_device_register(struct omap_device *od) static int _od_runtime_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); + int ret; + + ret = pm_generic_runtime_suspend(dev); + + if (!ret) + omap_device_idle(pdev); + + return ret; +} - return omap_device_idle(pdev); +static int _od_runtime_idle(struct device *dev) +{ + return pm_generic_runtime_idle(dev); } static int _od_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); - return omap_device_enable(pdev); + omap_device_enable(pdev); + + return pm_generic_runtime_resume(dev); } static struct dev_power_domain omap_device_power_domain = { .ops = { .runtime_suspend = _od_runtime_suspend, + .runtime_idle = _od_runtime_idle, .runtime_resume = _od_runtime_resume, USE_PLATFORM_PM_SLEEP_OPS } diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 2abf9660bc6..a79a8ccd25f 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1027,17 +1027,13 @@ int s3c2410_dma_config(unsigned int channel, struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned int dcon; - pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", - __func__, channel, xferunit, dcon); + pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit); if (chan == NULL) return -EINVAL; - pr_debug("%s: Initial dcon is %08x\n", __func__, dcon); - dcon = chan->dcon & dma_sel.dcon_mask; - - pr_debug("%s: New dcon is %08x\n", __func__, dcon); + pr_debug("%s: dcon is %08x\n", __func__, dcon); switch (chan->req_ch) { case DMACH_I2S_IN: @@ -1235,7 +1231,7 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp) /* restore channel's hardware configuration */ if (!cp->in_use) - return 0; + return; printk(KERN_INFO "dma%d: restoring configuration\n", cp->number); @@ -1246,8 +1242,6 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp) if (cp->map != NULL) dma_sel.select(cp, cp->map); - - return 0; } static void s3c2410_dma_resume(void) diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index e98f5c5c787..7f9ff2afffd 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -39,6 +39,7 @@ config S5P_GPIO_INT config S5P_HRT bool + select SAMSUNG_DEV_PWM help Use the High Resolution timer support diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h index d973d39666a..36d3551173b 100644 --- a/arch/arm/plat-s5p/include/plat/map-s5p.h +++ b/arch/arm/plat-s5p/include/plat/map-s5p.h @@ -35,9 +35,10 @@ #define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000) #define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x)) #define S5P_VA_SCU S5P_VA_COREPERI(0x0) -#define S5P_VA_GIC_CPU S5P_VA_COREPERI(0x100) #define S5P_VA_TWD S5P_VA_COREPERI(0x600) -#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000) + +#define S5P_VA_GIC_CPU S3C_ADDR(0x02810000) +#define S5P_VA_GIC_DIST S3C_ADDR(0x02820000) #define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000) diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c index b0866751523..7c82f06baf5 100644 --- a/arch/arm/plat-s5p/s5p-time.c +++ b/arch/arm/plat-s5p/s5p-time.c @@ -370,11 +370,11 @@ static void __init s5p_clocksource_init(void) clock_rate = clk_get_rate(tin_source); - init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); - s5p_time_setup(timer_source.source_id, TCNT_MAX); s5p_time_start(timer_source.source_id, PERIODIC); + init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); + if (clocksource_register_hz(&time_clocksource, clock_rate)) panic("%s: can't register clocksource\n", time_clocksource.name); } diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index e8f2be2d67f..ee8deef1948 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -21,6 +21,7 @@ #include <linux/clk.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/regulator/consumer.h> #include <plat/regs-adc.h> #include <plat/adc.h> @@ -39,8 +40,9 @@ */ enum s3c_cpu_type { - TYPE_S3C24XX, - TYPE_S3C64XX + TYPE_ADCV1, /* S3C24XX */ + TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */ + TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */ }; struct s3c_adc_client { @@ -71,6 +73,7 @@ struct adc_device { unsigned int prescale; int irq; + struct regulator *vdd; }; static struct adc_device *adc_dev; @@ -91,6 +94,7 @@ static inline void s3c_adc_select(struct adc_device *adc, struct s3c_adc_client *client) { unsigned con = readl(adc->regs + S3C2410_ADCCON); + enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data; client->select_cb(client, 1); @@ -98,8 +102,12 @@ static inline void s3c_adc_select(struct adc_device *adc, con &= ~S3C2410_ADCCON_STDBM; con &= ~S3C2410_ADCCON_STARTMASK; - if (!client->is_ts) - con |= S3C2410_ADCCON_SELMUX(client->channel); + if (!client->is_ts) { + if (cpu == TYPE_ADCV3) + writel(client->channel & 0xf, adc->regs + S5P_ADCMUX); + else + con |= S3C2410_ADCCON_SELMUX(client->channel); + } writel(con, adc->regs + S3C2410_ADCCON); } @@ -285,8 +293,8 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) client->nr_samples--; - if (cpu == TYPE_S3C64XX) { - /* S3C64XX ADC resolution is 12-bit */ + if (cpu != TYPE_ADCV1) { + /* S3C64XX/S5P ADC resolution is 12-bit */ data0 &= 0xfff; data1 &= 0xfff; } else { @@ -312,7 +320,7 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) } exit: - if (cpu == TYPE_S3C64XX) { + if (cpu != TYPE_ADCV1) { /* Clear ADC interrupt */ writel(0, adc->regs + S3C64XX_ADCCLRINT); } @@ -338,17 +346,24 @@ static int s3c_adc_probe(struct platform_device *pdev) adc->pdev = pdev; adc->prescale = S3C2410_ADCCON_PRSCVL(49); + adc->vdd = regulator_get(dev, "vdd"); + if (IS_ERR(adc->vdd)) { + dev_err(dev, "operating without regulator \"vdd\" .\n"); + ret = PTR_ERR(adc->vdd); + goto err_alloc; + } + adc->irq = platform_get_irq(pdev, 1); if (adc->irq <= 0) { dev_err(dev, "failed to get adc irq\n"); ret = -ENOENT; - goto err_alloc; + goto err_reg; } ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc); if (ret < 0) { dev_err(dev, "failed to attach adc irq\n"); - goto err_alloc; + goto err_reg; } adc->clk = clk_get(dev, "adc"); @@ -372,10 +387,14 @@ static int s3c_adc_probe(struct platform_device *pdev) goto err_clk; } + ret = regulator_enable(adc->vdd); + if (ret) + goto err_ioremap; + clk_enable(adc->clk); tmp = adc->prescale | S3C2410_ADCCON_PRSCEN; - if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) { + if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1) { /* Enable 12-bit ADC resolution */ tmp |= S3C64XX_ADCCON_RESSEL; } @@ -388,12 +407,15 @@ static int s3c_adc_probe(struct platform_device *pdev) return 0; + err_ioremap: + iounmap(adc->regs); err_clk: clk_put(adc->clk); err_irq: free_irq(adc->irq, adc); - + err_reg: + regulator_put(adc->vdd); err_alloc: kfree(adc); return ret; @@ -406,6 +428,8 @@ static int __devexit s3c_adc_remove(struct platform_device *pdev) iounmap(adc->regs); free_irq(adc->irq, adc); clk_disable(adc->clk); + regulator_disable(adc->vdd); + regulator_put(adc->vdd); clk_put(adc->clk); kfree(adc); @@ -413,8 +437,10 @@ static int __devexit s3c_adc_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) +static int s3c_adc_suspend(struct device *dev) { + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); struct adc_device *adc = platform_get_drvdata(pdev); unsigned long flags; u32 con; @@ -428,19 +454,30 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) disable_irq(adc->irq); spin_unlock_irqrestore(&adc->lock, flags); clk_disable(adc->clk); + regulator_disable(adc->vdd); return 0; } -static int s3c_adc_resume(struct platform_device *pdev) +static int s3c_adc_resume(struct device *dev) { + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); struct adc_device *adc = platform_get_drvdata(pdev); + int ret; + unsigned long tmp; + ret = regulator_enable(adc->vdd); + if (ret) + return ret; clk_enable(adc->clk); enable_irq(adc->irq); - writel(adc->prescale | S3C2410_ADCCON_PRSCEN, - adc->regs + S3C2410_ADCCON); + tmp = adc->prescale | S3C2410_ADCCON_PRSCEN; + /* Enable 12-bit ADC resolution */ + if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1) + tmp |= S3C64XX_ADCCON_RESSEL; + writel(tmp, adc->regs + S3C2410_ADCCON); return 0; } @@ -453,25 +490,32 @@ static int s3c_adc_resume(struct platform_device *pdev) static struct platform_device_id s3c_adc_driver_ids[] = { { .name = "s3c24xx-adc", - .driver_data = TYPE_S3C24XX, + .driver_data = TYPE_ADCV1, }, { .name = "s3c64xx-adc", - .driver_data = TYPE_S3C64XX, + .driver_data = TYPE_ADCV2, + }, { + .name = "samsung-adc-v3", + .driver_data = TYPE_ADCV3, }, { } }; MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids); +static const struct dev_pm_ops adc_pm_ops = { + .suspend = s3c_adc_suspend, + .resume = s3c_adc_resume, +}; + static struct platform_driver s3c_adc_driver = { .id_table = s3c_adc_driver_ids, .driver = { .name = "s3c-adc", .owner = THIS_MODULE, + .pm = &adc_pm_ops, }, .probe = s3c_adc_probe, .remove = __devexit_p(s3c_adc_remove), - .suspend = s3c_adc_suspend, - .resume = s3c_adc_resume, }; static int __init adc_init(void) @@ -485,4 +529,4 @@ static int __init adc_init(void) return ret; } -arch_initcall(adc_init); +module_init(adc_init); diff --git a/arch/arm/plat-samsung/dev-asocdma.c b/arch/arm/plat-samsung/dev-asocdma.c index a068c4f42d5..97e35d3c064 100644 --- a/arch/arm/plat-samsung/dev-asocdma.c +++ b/arch/arm/plat-samsung/dev-asocdma.c @@ -23,3 +23,13 @@ struct platform_device samsung_asoc_dma = { } }; EXPORT_SYMBOL(samsung_asoc_dma); + +struct platform_device samsung_asoc_idma = { + .name = "samsung-idma", + .id = -1, + .dev = { + .dma_mask = &audio_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; +EXPORT_SYMBOL(samsung_asoc_idma); diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h index a0826ed2f9f..aa9875f77c4 100644 --- a/arch/arm/plat-samsung/include/plat/audio.h +++ b/arch/arm/plat-samsung/include/plat/audio.h @@ -44,6 +44,7 @@ struct samsung_i2s { * Also corresponds to clocks of I2SMOD[10] */ const char **src_clk; + dma_addr_t idma_addr; }; /** diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 4af108ff411..540969047a7 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -12,6 +12,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#ifndef __PLAT_DEVS_H +#define __PLAT_DEVS_H __FILE__ + #include <linux/platform_device.h> struct s3c24xx_uart_resources { @@ -36,6 +40,7 @@ extern struct platform_device s3c64xx_device_spi0; extern struct platform_device s3c64xx_device_spi1; extern struct platform_device samsung_asoc_dma; +extern struct platform_device samsung_asoc_idma; extern struct platform_device s3c64xx_device_pcm0; extern struct platform_device s3c64xx_device_pcm1; @@ -108,6 +113,7 @@ extern struct platform_device exynos4_device_i2s2; extern struct platform_device exynos4_device_spdif; extern struct platform_device exynos4_device_pd[]; extern struct platform_device exynos4_device_ahci; +extern struct platform_device exynos4_device_dwmci; extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; @@ -159,3 +165,5 @@ extern struct platform_device s3c_device_ac97; */ extern void *s3c_set_platdata(void *pd, size_t pdsize, struct platform_device *pdev); + +#endif /* __PLAT_DEVS_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h index 7554c4fcddb..035e8c38d69 100644 --- a/arch/arm/plat-samsung/include/plat/regs-adc.h +++ b/arch/arm/plat-samsung/include/plat/regs-adc.h @@ -21,6 +21,7 @@ #define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10) #define S3C64XX_ADCUPDN S3C2410_ADCREG(0x14) #define S3C64XX_ADCCLRINT S3C2410_ADCREG(0x18) +#define S5P_ADCMUX S3C2410_ADCREG(0x1C) #define S3C64XX_ADCCLRINTPNDNUP S3C2410_ADCREG(0x20) diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index c151c5f94a8..116edfe120b 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -224,6 +224,8 @@ #define S5PV210_UFSTAT_RXMASK (255<<0) #define S5PV210_UFSTAT_RXSHIFT (0) +#define NO_NEED_CHECK_CLKSRC 1 + #ifndef __ASSEMBLY__ /* struct s3c24xx_uart_clksrc diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index 0ffe34a2155..4c16fa3621b 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -39,6 +39,7 @@ struct s3c64xx_spi_csinfo { * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number * @high_speed: If the controller supports HIGH_SPEED_EN bit + * @tx_st_done: Depends on tx fifo_lvl field */ struct s3c64xx_spi_info { int src_clk_nr; @@ -53,6 +54,7 @@ struct s3c64xx_spi_info { int fifo_lvl_mask; int rx_lvl_offset; int high_speed; + int tx_st_done; }; /** diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c index 32582c0958e..8960eaf8bb2 100644 --- a/arch/arm/plat-samsung/irq-uart.c +++ b/arch/arm/plat-samsung/irq-uart.c @@ -19,6 +19,8 @@ #include <linux/irq.h> #include <linux/io.h> +#include <asm/mach/irq.h> + #include <mach/map.h> #include <plat/irq-uart.h> #include <plat/regs-serial.h> @@ -30,9 +32,12 @@ static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) { struct s3c_uart_irq *uirq = desc->irq_data.handler_data; + struct irq_chip *chip = irq_get_chip(irq); u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); int base = uirq->base_irq; + chained_irq_enter(chip, desc); + if (pend & (1 << 0)) generic_handle_irq(base); if (pend & (1 << 1)) @@ -41,6 +46,8 @@ static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) generic_handle_irq(base + 2); if (pend & (1 << 3)) generic_handle_irq(base + 3); + + chained_irq_exit(chip, desc); } static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 5c0a440d6e1..4f9a9515bea 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -268,6 +268,7 @@ static int s3c_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ s3c_pm_save_gpios(); + s3c_pm_saved_gpios(); s3c_pm_save_uarts(); s3c_pm_save_core(); @@ -309,6 +310,7 @@ static int s3c_pm_enter(suspend_state_t state) s3c_pm_restore_core(); s3c_pm_restore_uarts(); s3c_pm_restore_gpios(); + s3c_pm_restored_gpios(); s3c_pm_debug_init(); |