summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-s3c24xx/common-smdk.c20
-rw-r--r--arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h21
-rw-r--r--arch/arm/mach-s3c24xx/include/mach/gta02.h69
-rw-r--r--arch/arm/mach-s3c24xx/include/mach/regs-gpio.h17
-rw-r--r--arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h70
-rw-r--r--arch/arm/mach-s3c24xx/mach-gta02.c1
-rw-r--r--arch/arm/mach-s3c24xx/mach-mini2440.c4
-rw-r--r--arch/arm/mach-s3c24xx/mach-qt2410.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-rx1950.c1
-rw-r--r--arch/arm/mach-s3c24xx/pm-s3c2410.c12
-rw-r--r--arch/arm/mach-s3c24xx/pm-s3c2412.c1
-rw-r--r--arch/arm/mach-s3c24xx/s3c2412.c1
-rw-r--r--arch/arm/mach-s3c24xx/s3c244x.c1
-rw-r--r--arch/arm/mach-s3c24xx/setup-ts.c6
14 files changed, 40 insertions, 190 deletions
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 084604be6ad..87e75a250d5 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -182,19 +182,21 @@ static struct platform_device __initdata *smdk_devs[] = {
&smdk_led7,
};
+static const struct gpio smdk_led_gpios[] = {
+ { S3C2410_GPF(4), GPIOF_OUT_INIT_HIGH, NULL },
+ { S3C2410_GPF(5), GPIOF_OUT_INIT_HIGH, NULL },
+ { S3C2410_GPF(6), GPIOF_OUT_INIT_HIGH, NULL },
+ { S3C2410_GPF(7), GPIOF_OUT_INIT_HIGH, NULL },
+};
+
void __init smdk_machine_init(void)
{
/* Configure the LEDs (even if we have no LED support)*/
- s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
-
- s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
- s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
- s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
- s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
+ int ret = gpio_request_array(smdk_led_gpios,
+ ARRAY_SIZE(smdk_led_gpios));
+ if (!WARN_ON(ret < 0))
+ gpio_free_array(smdk_led_gpios, ARRAY_SIZE(smdk_led_gpios));
if (machine_is_smdk2443())
smdk_nand_info.twrph0 = 50;
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
index 019ea86057f..3890a05948f 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
@@ -93,26 +93,5 @@ enum s3c_gpio_number {
#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr))
#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr))
-/* compatibility until drivers can be modified */
-
-#define S3C2410_GPA0 S3C2410_GPA(0)
-#define S3C2410_GPA1 S3C2410_GPA(1)
-#define S3C2410_GPA3 S3C2410_GPA(3)
-#define S3C2410_GPA7 S3C2410_GPA(7)
-
-#define S3C2410_GPE0 S3C2410_GPE(0)
-#define S3C2410_GPE1 S3C2410_GPE(1)
-#define S3C2410_GPE2 S3C2410_GPE(2)
-#define S3C2410_GPE3 S3C2410_GPE(3)
-#define S3C2410_GPE4 S3C2410_GPE(4)
-#define S3C2410_GPE5 S3C2410_GPE(5)
-#define S3C2410_GPE6 S3C2410_GPE(6)
-#define S3C2410_GPE7 S3C2410_GPE(7)
-#define S3C2410_GPE8 S3C2410_GPE(8)
-#define S3C2410_GPE9 S3C2410_GPE(9)
-#define S3C2410_GPE10 S3C2410_GPE(10)
-
-#define S3C2410_GPH10 S3C2410_GPH(10)
-
#endif /* __MACH_GPIONRS_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/include/mach/gta02.h
index 3a56a229cac..21739348215 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gta02.h
+++ b/arch/arm/mach-s3c24xx/include/mach/gta02.h
@@ -3,82 +3,13 @@
#include <mach/regs-gpio.h>
-/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
-#define GTA02v1_SYSTEM_REV 0x00000310
-#define GTA02v2_SYSTEM_REV 0x00000320
-#define GTA02v3_SYSTEM_REV 0x00000330
-#define GTA02v4_SYSTEM_REV 0x00000340
-#define GTA02v5_SYSTEM_REV 0x00000350
-/* since A7 is basically same as A6, we use A6 PCB ID */
-#define GTA02v6_SYSTEM_REV 0x00000360
-
-#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */
-
-#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0)
-#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1)
#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
-#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3)
-#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5)
-#define GTA02_GPIO_BT_EN S3C2410_GPB(6)
-#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7)
-#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8)
#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
-
-#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */
-
-#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */
-#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */
-#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */
-
-#define GTA02_GPIO_nG1_INT S3C2410_GPF(0)
-#define GTA02_GPIO_IO1 S3C2410_GPF(1)
-#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4)
-#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */
#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6)
#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7)
-
-#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4)
-#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
-#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
-
#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
-#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2)
#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4)
-#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5)
-#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */
-#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7)
-#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8)
-#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8)
-#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10)
-#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */
-#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
-#define GTA02_IRQ_MODEM IRQ_EINT1
-#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */
-#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4
-#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5
-#define GTA02_IRQ_AUX IRQ_EINT6
-#define GTA02_IRQ_nHOLD IRQ_EINT7
#define GTA02_IRQ_PCF50633 IRQ_EINT9
-#define GTA02_IRQ_3D IRQ_EINT12
-#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */
-#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */
-
-/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
-#define GTA02_PCB_ID1_0 S3C2410_GPC(13)
-#define GTA02_PCB_ID1_1 S3C2410_GPC(15)
-#define GTA02_PCB_ID1_2 S3C2410_GPD(0)
-#define GTA02_PCB_ID2_0 S3C2410_GPD(3)
-#define GTA02_PCB_ID2_1 S3C2410_GPD(4)
-
-int gta02_get_pcb_revision(void);
#endif /* _GTA02_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
index cac1ad6b582..a11a638bd59 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
@@ -302,7 +302,7 @@
/* S3C2410:
* Port G consists of 8 GPIO/IRQ/Special function
*
- * GPGCON has 2 bits for each of the input pins on port F
+ * GPGCON has 2 bits for each of the input pins on port G
* 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
*
* pull up works like all other ports.
@@ -366,7 +366,7 @@
/* Port H consists of11 GPIO/serial/Misc pins
*
- * GPGCON has 2 bits for each of the input pins on port F
+ * GPHCON has 2 bits for each of the input pins on port H
* 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
*
* pull up works like all other ports.
@@ -427,6 +427,19 @@
* for the 2412/2413 from the 2410/2440/2442
*/
+/*
+ * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits
+ * for each of the pins on port J.
+ * 00 - input, 01 output, 10 - camera
+ *
+ * Pull up works like all other ports.
+ */
+
+#define S3C2413_GPJCON S3C2410_GPIOREG(0x80)
+#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84)
+#define S3C2413_GPJUP S3C2410_GPIOREG(0x88)
+#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C)
+
/* S3C2443 and above */
#define S3C2440_GPJCON S3C2410_GPIOREG(0xD0)
#define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4)
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h
deleted file mode 100644
index 19575e06111..00000000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2440 GPIO J register definitions
-*/
-
-
-#ifndef __ASM_ARCH_REGS_GPIOJ_H
-#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
-
-/* Port J consists of 13 GPIO/Camera pins
- *
- * GPJCON has 2 bits for each of the input pins on port F
- * 00 = 0 input, 1 output, 2 Camera
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2413_GPJCON S3C2410_GPIOREG(0x80)
-#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84)
-#define S3C2413_GPJUP S3C2410_GPIOREG(0x88)
-#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C)
-
-#define S3C2440_GPJ0_OUTP (0x01 << 0)
-#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0)
-
-#define S3C2440_GPJ1_OUTP (0x01 << 2)
-#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2)
-
-#define S3C2440_GPJ2_OUTP (0x01 << 4)
-#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4)
-
-#define S3C2440_GPJ3_OUTP (0x01 << 6)
-#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6)
-
-#define S3C2440_GPJ4_OUTP (0x01 << 8)
-#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8)
-
-#define S3C2440_GPJ5_OUTP (0x01 << 10)
-#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10)
-
-#define S3C2440_GPJ6_OUTP (0x01 << 12)
-#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12)
-
-#define S3C2440_GPJ7_OUTP (0x01 << 14)
-#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14)
-
-#define S3C2440_GPJ8_OUTP (0x01 << 16)
-#define S3C2440_GPJ8_CAMPCLK (0x02 << 16)
-
-#define S3C2440_GPJ9_OUTP (0x01 << 18)
-#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18)
-
-#define S3C2440_GPJ10_OUTP (0x01 << 20)
-#define S3C2440_GPJ10_CAMHREF (0x02 << 20)
-
-#define S3C2440_GPJ11_OUTP (0x01 << 22)
-#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
-
-#define S3C2440_GPJ12_OUTP (0x01 << 24)
-#define S3C2440_GPJ12_CAMRESET (0x02 << 24)
-
-#endif /* __ASM_ARCH_REGS_GPIOJ_H */
-
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 0f29f64a3ee..92e1f93a6bc 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -71,7 +71,6 @@
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
#include <mach/fb.h>
#include <plat/usb-control.h>
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index f092b188ab7..bd6d2525deb 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -634,8 +634,8 @@ static void __init mini2440_init(void)
s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
/* Turn the backlight early on */
- WARN_ON(gpio_request(S3C2410_GPG(4), "backlight"));
- gpio_direction_output(S3C2410_GPG(4), 1);
+ WARN_ON(gpio_request_one(S3C2410_GPG(4), GPIOF_OUT_INIT_HIGH, NULL));
+ gpio_free(S3C2410_GPG(4));
/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index b868dddcb83..678bbca2b5e 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -47,7 +47,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
#include <mach/leds-gpio.h>
#include <mach/regs-lcd.h>
#include <plat/regs-serial.h>
@@ -325,8 +324,9 @@ static void __init qt2410_machine_init(void)
}
s3c24xx_fb_set_platdata(&qt2410_fb_info);
- s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
+ /* set initial state of the LED GPIO */
+ WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL));
+ gpio_free(S3C2410_GPB(0));
s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index a6762aae472..7ee73f27f20 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -42,7 +42,6 @@
#include <asm/mach-types.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
#include <mach/regs-lcd.h>
#include <mach/h1940.h>
#include <mach/fb.h>
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c
index 03f706dd600..949ae05e07c 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c
@@ -77,8 +77,10 @@ static void s3c2410_pm_prepare(void)
__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
}
- if ( machine_is_aml_m5900() )
- s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
+ if (machine_is_aml_m5900()) {
+ gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPF(2));
+ }
if (machine_is_rx1950()) {
/* According to S3C2442 user's manual, page 7-17,
@@ -103,8 +105,10 @@ static void s3c2410_pm_resume(void)
tmp &= S3C2410_GSTATUS2_OFFRESET;
__raw_writel(tmp, S3C2410_GSTATUS2);
- if ( machine_is_aml_m5900() )
- s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+ if (machine_is_aml_m5900()) {
+ gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
+ gpio_free(S3C2410_GPF(2));
+ }
}
struct syscore_ops s3c2410_pm_syscore_ops = {
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c
index d04588506ec..c60f67a75af 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c
@@ -26,7 +26,6 @@
#include <asm/irq.h>
#include <mach/regs-power.h>
-#include <mach/regs-gpioj.h>
#include <mach/regs-gpio.h>
#include <mach/regs-dsc.h>
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index d4bc7f960bb..6c5f4031ff0 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -39,7 +39,6 @@
#include <plat/regs-serial.h>
#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
#include <mach/regs-dsc.h>
#include <plat/regs-spi.h>
#include <mach/regs-s3c2412.h>
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index 6f74118f60c..b0b60a1154d 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -36,7 +36,6 @@
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
#include <mach/regs-dsc.h>
#include <plat/s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/setup-ts.c b/arch/arm/mach-s3c24xx/setup-ts.c
index ed263866367..4e11affce3a 100644
--- a/arch/arm/mach-s3c24xx/setup-ts.c
+++ b/arch/arm/mach-s3c24xx/setup-ts.c
@@ -16,7 +16,6 @@
struct platform_device; /* don't need the contents */
#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
/**
* s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
@@ -27,8 +26,5 @@ struct platform_device; /* don't need the contents */
*/
void s3c24xx_ts_cfg_gpio(struct platform_device *dev)
{
- s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
- s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
- s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
- s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
+ s3c_gpio_cfgpin_range(S3C2410_GPG(12), 4, S3C_GPIO_SFN(3));
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-02 22:59:17 +0000