diff options
Diffstat (limited to 'arch/arm')
132 files changed, 726 insertions, 304 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 73067efd484..ade7e924bef 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1603,8 +1603,8 @@ config NR_CPUS default "4" config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL + bool "Support for hot-pluggable CPUs" + depends on SMP && HOTPLUG help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1645,8 +1645,8 @@ config HZ default 100 config THUMB2_KERNEL - bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)" - depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL + bool "Compile the kernel in Thumb-2 mode" + depends on CPU_V7 && !CPU_V6 && !CPU_V6K select AEABI select ARM_ASM_UNIFIED select ARM_UNWIND @@ -1850,6 +1850,7 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" depends on EXPERIMENTAL && ARM && OF + depends on CPU_V7 && !CPU_V6 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f023e3acdfb..5f914fca911 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -21,8 +21,6 @@ endif OBJCOPYFLAGS :=-O binary -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe -# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: -KBUILD_CFLAGS +=$(call cc-option,-marm,) # Never generate .eh_frame KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) @@ -105,17 +103,20 @@ endif ifeq ($(CONFIG_THUMB2_KERNEL),y) AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it) AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) -CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) -AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb +CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) +AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb # Work around buggy relocation from gas if requested: ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y) CFLAGS_MODULE +=-fno-optimize-sibling-calls endif +else +CFLAGS_ISA :=$(call cc-option,-marm,) +AFLAGS_ISA :=$(CFLAGS_ISA) endif # Need -Uarm for gcc < 3.x -KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm -KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float +KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm +KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float CHECKFLAGS += -D__arm__ diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 3fdab016aa5..9137df539b6 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' + @$(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' $(obj)/Image $(obj)/zImage: FORCE @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)' @@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' endif @@ -90,7 +90,7 @@ fi $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) - @echo ' Image $@ is ready' + @$(kecho) ' Image $@ is ready' $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@ @@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' PHONY += initrd FORCE initrd: diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 90275f036cd..49ca86e37b8 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -652,6 +652,15 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size mov pc, lr ENDPROC(__setup_mmu) +@ Enable unaligned access on v6, to allow better code generation +@ for the decompressor C code: +__armv6_mmu_cache_on: + mrc p15, 0, r0, c1, c0, 0 @ read SCTLR + bic r0, r0, #2 @ A (no unaligned access fault) + orr r0, r0, #1 << 22 @ U (v6 unaligned access model) + mcr p15, 0, r0, c1, c0, 0 @ write SCTLR + b __armv4_mmu_cache_on + __arm926ejs_mmu_cache_on: #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH mov r0, #4 @ put dcache in WT mode @@ -694,6 +703,9 @@ __armv7_mmu_cache_on: bic r0, r0, #1 << 28 @ clear SCTLR.TRE orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer + bic r0, r0, #2 @ A (no unaligned access fault) + orr r0, r0, #1 << 22 @ U (v6 unaligned access model) + @ (needed for ARM1176) #ifdef CONFIG_MMU #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables @@ -914,7 +926,7 @@ proc_types: .word 0x0007b000 @ ARMv6 .word 0x000ff000 - W(b) __armv4_mmu_cache_on + W(b) __armv6_mmu_cache_on W(b) __armv4_mmu_cache_off W(b) __armv6_mmu_cache_flush diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c1ce813fcc4..f37cf9fa5fa 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -25,6 +25,8 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-trats.dtb \ exynos5250-smdk5250.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb +dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ + integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index b06c0db273b..e6391a4e664 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -126,14 +126,14 @@ #size-cells = <0>; btn3 { - label = "Buttin 3"; + label = "Button 3"; gpios = <&pioA 30 1>; linux,code = <0x103>; gpio-key,wakeup; }; btn4 { - label = "Buttin 4"; + label = "Button 4"; gpios = <&pioA 31 1>; linux,code = <0x104>; gpio-key,wakeup; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 748ba7aa746..4b0e0ca08f4 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -483,6 +483,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <0 21 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -494,6 +496,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; interrupts = <0 22 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -505,6 +509,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; interrupts = <0 55 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -516,6 +522,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; interrupts = <0 12 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -527,6 +535,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; interrupts = <0 51 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -573,33 +583,38 @@ interrupts = <0 60 0x4>; status = "disabled"; }; + sdi@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; interrupts = <0 50 0x4>; status = "disabled"; }; + sdi@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; interrupts = <0 41 0x4>; status = "disabled"; }; + sdi@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <0 59 0x4>; status = "disabled"; }; + sdi@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; interrupts = <0 99 0x4>; status = "disabled"; }; + sdi@80008000 { compatible = "arm,pl18x", "arm,primecell"; - reg = <0x80114000 0x1000>; + reg = <0x80008000 0x1000>; interrupts = <0 100 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 96fb824b5e6..5a00022383e 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -4,21 +4,32 @@ compatible = "marvell,dove"; model = "Marvell Armada 88AP510 SoC"; - interrupt-parent = <&intc>; - - intc: interrupt-controller { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xf1020204 0x04>, - <0xf1020214 0x04>; - }; - - mbus@f1000000 { + soc@f1000000 { compatible = "simple-bus"; - ranges = <0 0xf1000000 0x4000000>; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&intc>; + + ranges = <0xc8000000 0xc8000000 0x0100000 /* CESA SRAM 1M */ + 0xe0000000 0xe0000000 0x8000000 /* PCIe0 Mem 128M */ + 0xe8000000 0xe8000000 0x8000000 /* PCIe1 Mem 128M */ + 0xf0000000 0xf0000000 0x0100000 /* ScratchPad 1M */ + 0x00000000 0xf1000000 0x1000000 /* SB/NB regs 16M */ + 0xf2000000 0xf2000000 0x0100000 /* PCIe0 I/O 1M */ + 0xf2100000 0xf2100000 0x0100000 /* PCIe0 I/O 1M */ + 0xf8000000 0xf8000000 0x8000000>; /* BootROM 128M */ + + l2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0>; + }; + + intc: interrupt-controller { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20204 0x04>, <0x20214 0x04>; + }; uart0: serial@12000 { compatible = "ns16550a"; @@ -56,11 +67,6 @@ status = "disabled"; }; - wdt: wdt@20300 { - compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>; - }; - gpio0: gpio@d0400 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; @@ -139,5 +145,14 @@ nr-ports = <1>; status = "disabled"; }; + + crypto: crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0xc8000000 0x800>; + reg-names = "regs", "sram"; + interrupts = <31>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 73567b843e7..a21511c1407 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -20,8 +20,10 @@ compatible = "samsung,trats", "samsung,exynos4210"; memory { - reg = <0x40000000 0x20000000 - 0x60000000 0x20000000>; + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000 + 0x60000000 0x10000000 + 0x70000000 0x10000000>; }; chosen { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 9ca4ca70c1b..6d31aa38346 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -69,6 +69,7 @@ interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 34>; + clock-names = "gpmi_io"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index e16d6315548..55c57ea6169 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -85,6 +85,7 @@ interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 50>; + clock-names = "gpmi_io"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 15df4c105e8..5bfa02a3f85 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -37,6 +37,13 @@ pinctrl_hog: hoggrp { fsl,pins = < 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ + >; + }; + }; + + arm2 { + pinctrl_usdhc3_arm2: usdhc3grp-arm2 { + fsl,pins = < 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ >; @@ -58,7 +65,8 @@ wp-gpios = <&gpio6 14 0>; vmmc-supply = <®_3p3v>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1>; + pinctrl-0 = <&pinctrl_usdhc3_1 + &pinctrl_usdhc3_arm2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 8ac51c08269..8fea375c734 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -48,17 +48,19 @@ #size-cells = <0>; button@1 { label = "Function Button"; - linux,code = <132>; + linux,code = <357>; gpios = <&gpio1 9 1>; }; button@2 { label = "Power-on Switch"; - linux,code = <116>; + linux,code = <0>; + linux,input-type = <5>; gpios = <&gpio1 10 1>; }; button@3 { label = "Power-auto Switch"; - linux,code = <142>; + linux,code = <1>; + linux,input-type = <5>; gpios = <&gpio1 11 1>; }; }; @@ -67,28 +69,28 @@ compatible = "gpio-leds"; led@1 { - label = "lschlv2:blue:func"; + label = "lsxl:blue:func"; gpios = <&gpio1 4 1>; }; led@2 { - label = "lschlv2:red:alarm"; + label = "lsxl:red:alarm"; gpios = <&gpio1 5 1>; }; led@3 { - label = "lschlv2:amber:info"; + label = "lsxl:amber:info"; gpios = <&gpio1 6 1>; }; led@4 { - label = "lschlv2:blue:power"; + label = "lsxl:blue:power"; gpios = <&gpio1 7 1>; linux,default-trigger = "default-on"; }; led@5 { - label = "lschlv2:red:func"; + label = "lsxl:red:func"; gpios = <&gpio1 16 1>; }; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f38ea8771b4..696e929d030 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -257,7 +257,7 @@ interrupt-names = "common", "tx", "rx", "sidetone"; interrupt-parent = <&intc>; ti,buffer-size = <1280>; - ti,hwmods = "mcbsp2"; + ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; }; mcbsp3: mcbsp@49024000 { @@ -272,7 +272,7 @@ interrupt-names = "common", "tx", "rx", "sidetone"; interrupt-parent = <&intc>; ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; + ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; }; mcbsp4: mcbsp@49026000 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index b1497c7d7d6..df7f2270fc9 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -73,8 +73,8 @@ pinmux: pinmux { compatible = "nvidia,tegra30-pinmux"; - reg = <0x70000868 0xd0 /* Pad control registers */ - 0x70003000 0x3e0>; /* Mux registers */ + reg = <0x70000868 0xd4 /* Pad control registers */ + 0x70003000 0x3e4>; /* Mux registers */ }; serial@70006000 { diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index b459691655a..330f833ac3b 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -71,13 +71,13 @@ ehci@d8007100 { compatible = "via,vt8500-ehci"; reg = <0xd8007100 0x200>; - interrupts = <43>; + interrupts = <1>; }; uhci@d8007300 { compatible = "platform-uhci"; reg = <0xd8007300 0x200>; - interrupts = <43>; + interrupts = <0>; }; fb@d8050800 { diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 66aa7a6db88..394ded624e3 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -139,6 +139,7 @@ CONFIG_I2C_IMX=y CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_MC9S08DZ60=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y @@ -155,6 +156,7 @@ CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX3=y CONFIG_FB=y +CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 7bcf850eddc..3458752c4bb 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -1,6 +1,6 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y @@ -9,10 +9,12 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_MVEBU=y -CONFIG_MACH_ARMADA_370_XP=y +CONFIG_MACH_ARMADA_370=y +CONFIG_MACH_ARMADA_XP=y +# CONFIG_CACHE_L2X0 is not set CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_USE_OF=y +# CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y @@ -23,6 +25,8 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index cdd4d2bd396..2ba9e63d0f1 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -1,3 +1,4 @@ +CONFIG_ARCH_VERSATILE=y CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h index 59426a4595c..e847d23351e 100644 --- a/arch/arm/include/asm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -8,7 +8,7 @@ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp) +#define flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp)) #define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) #define flat_get_relocate_addr(rel) (rel) #define flat_set_persistent(relval, p) 0 diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 35c1ed89b93..42f042ee4ad 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -64,7 +64,7 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); static inline void __raw_writew(u16 val, volatile void __iomem *addr) { asm volatile("strh %1, %0" - : "+Qo" (*(volatile u16 __force *)addr) + : "+Q" (*(volatile u16 __force *)addr) : "r" (val)); } @@ -72,7 +72,7 @@ static inline u16 __raw_readw(const volatile void __iomem *addr) { u16 val; asm volatile("ldrh %1, %0" - : "+Qo" (*(volatile u16 __force *)addr), + : "+Q" (*(volatile u16 __force *)addr), "=r" (val)); return val; } diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index 05b8e82ec9f..e3f75726343 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -10,7 +10,5 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); -extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, - unsigned long rate); #endif diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 77bd79f2ffd..7e1f76027f6 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -200,8 +200,8 @@ extern int __put_user_8(void *, unsigned long long); #define USER_DS KERNEL_DS #define segment_eq(a,b) (1) -#define __addr_ok(addr) (1) -#define __range_ok(addr,size) (0) +#define __addr_ok(addr) ((void)(addr),1) +#define __range_ok(addr,size) ((void)(addr),0) #define get_fs() (KERNEL_DS) static inline void set_fs(mm_segment_t fs) diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h index 6a6f1e485f4..301c1db3e99 100644 --- a/arch/arm/include/asm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -27,9 +27,9 @@ #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] - tst \tmp, #HWCAP_VFPv3D16 - ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} - addne \base, \base, #32*4 @ step over unused register space + tst \tmp, #HWCAP_VFPD32 + ldcnel p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field @@ -51,9 +51,9 @@ #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] - tst \tmp, #HWCAP_VFPv3D16 - stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} - addne \base, \base, #32*4 @ step over unused register space + tst \tmp, #HWCAP_VFPD32 + stcnel p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h index ae05e56dd17..5000397134b 100644 --- a/arch/arm/include/asm/xen/interface.h +++ b/arch/arm/include/asm/xen/interface.h @@ -29,16 +29,22 @@ #ifndef __ASSEMBLY__ /* Explicitly size integers that represent pfns in the interface with - * Xen so that we can have one ABI that works for 32 and 64 bit guests. */ + * Xen so that we can have one ABI that works for 32 and 64 bit guests. + * Note that this means that the xen_pfn_t type may be capable of + * representing pfn's which the guest cannot represent in its own pfn + * type. However since pfn space is controlled by the guest this is + * fine since it simply wouldn't be able to create any sure pfns in + * the first place. + */ typedef uint64_t xen_pfn_t; +#define PRI_xen_pfn "llx" typedef uint64_t xen_ulong_t; +#define PRI_xen_ulong "llx" /* Guest handles for primitive C types. */ __DEFINE_GUEST_HANDLE(uchar, unsigned char); __DEFINE_GUEST_HANDLE(uint, unsigned int); -__DEFINE_GUEST_HANDLE(ulong, unsigned long); DEFINE_GUEST_HANDLE(char); DEFINE_GUEST_HANDLE(int); -DEFINE_GUEST_HANDLE(long); DEFINE_GUEST_HANDLE(void); DEFINE_GUEST_HANDLE(uint64_t); DEFINE_GUEST_HANDLE(uint32_t); diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index 174202318df..c6b9096cef9 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -10,7 +10,7 @@ #include <xen/interface/grant_table.h> #define pfn_to_mfn(pfn) (pfn) -#define phys_to_machine_mapping_valid (1) +#define phys_to_machine_mapping_valid(pfn) (1) #define mfn_to_pfn(mfn) (mfn) #define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT)) @@ -30,6 +30,8 @@ typedef struct xpaddr { #define XMADDR(x) ((xmaddr_t) { .maddr = (x) }) #define XPADDR(x) ((xpaddr_t) { .paddr = (x) }) +#define INVALID_P2M_ENTRY (~0UL) + static inline xmaddr_t phys_to_machine(xpaddr_t phys) { unsigned offset = phys.paddr & ~PAGE_MASK; @@ -74,9 +76,14 @@ static inline int m2p_remove_override(struct page *page, bool clear_pte) return 0; } +static inline bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); + return true; +} + static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn) { - BUG(); - return false; + return __set_phys_to_machine(pfn, mfn); } #endif /* _ASM_ARM_XEN_PAGE_H */ diff --git a/arch/arm/include/debug/8250_32.S b/arch/arm/include/debug/8250_32.S new file mode 100644 index 00000000000..8db01eeabbb --- /dev/null +++ b/arch/arm/include/debug/8250_32.S @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2011 Picochip Ltd., Jamie Iles + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit + * accesses to the 8250. + */ + +#include <linux/serial_reg.h> + + .macro senduart,rd,rx + str \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + /* The UART's don't have any flow control IO's wired up. */ + .macro waituart,rd,rx + .endm diff --git a/arch/arm/include/debug/picoxcell.S b/arch/arm/include/debug/picoxcell.S index 7419deb1b94..bc1f07c49cd 100644 --- a/arch/arm/include/debug/picoxcell.S +++ b/arch/arm/include/debug/picoxcell.S @@ -5,10 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit - * accesses to the 8250. */ -#include <linux/serial_reg.h> #define UART_SHIFT 2 #define PICOXCELL_UART1_BASE 0x80230000 @@ -19,17 +16,4 @@ ldr \rp, =PICOXCELL_UART1_BASE .endm - .macro senduart,rd,rx - str \rd, [\rx, #UART_TX << UART_SHIFT] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1002b - .endm - - /* The UART's don't have any flow control IO's wired up. */ - .macro waituart,rd,rx - .endm +#include "8250_32.S" diff --git a/arch/arm/include/debug/socfpga.S b/arch/arm/include/debug/socfpga.S index d6f26d23374..966b2f99494 100644 --- a/arch/arm/include/debug/socfpga.S +++ b/arch/arm/include/debug/socfpga.S @@ -7,6 +7,9 @@ * published by the Free Software Foundation. */ +#define UART_SHIFT 2 +#define DEBUG_LL_UART_OFFSET 0x00002000 + .macro addruart, rp, rv, tmp mov \rp, #DEBUG_LL_UART_OFFSET orr \rp, \rp, #0x00c00000 @@ -14,3 +17,5 @@ orr \rp, \rp, #0xff000000 @ physical base .endm +#include "8250_32.S" + diff --git a/arch/arm/include/uapi/asm/hwcap.h b/arch/arm/include/uapi/asm/hwcap.h index f254f6503cc..3688fd15a32 100644 --- a/arch/arm/include/uapi/asm/hwcap.h +++ b/arch/arm/include/uapi/asm/hwcap.h @@ -18,11 +18,12 @@ #define HWCAP_THUMBEE (1 << 11) #define HWCAP_NEON (1 << 12) #define HWCAP_VFPv3 (1 << 13) -#define HWCAP_VFPv3D16 (1 << 14) +#define HWCAP_VFPv3D16 (1 << 14) /* also set for VFPv4-D16 */ #define HWCAP_TLS (1 << 15) #define HWCAP_VFPv4 (1 << 16) #define HWCAP_IDIVA (1 << 17) #define HWCAP_IDIVT (1 << 18) +#define HWCAP_VFPD32 (1 << 19) /* set if VFP has 32 regs (not 16) */ #define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 417bac1846b..34711757ba5 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -88,9 +88,9 @@ ENTRY(ret_from_fork) bl schedule_tail cmp r5, #0 movne r0, r4 - movne lr, pc + adrne lr, BSYM(1f) movne pc, r5 - get_thread_info tsk +1: get_thread_info tsk b ret_slow_syscall ENDPROC(ret_from_fork) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 16cedb42c0c..896165096d6 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -34,6 +34,7 @@ #include <linux/list.h> #include <linux/kallsyms.h> #include <linux/proc_fs.h> +#include <linux/export.h> #include <asm/exception.h> #include <asm/mach/arch.h> @@ -109,6 +110,7 @@ void set_irq_flags(unsigned int irq, unsigned int iflags) /* Order is clear bits in "clr" then set bits in "set" */ irq_modify_status(irq, clr, set & ~clr); } +EXPORT_SYMBOL_GPL(set_irq_flags); void __init init_IRQ(void) { diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index 38c1a3b103a..83931290506 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -366,7 +366,9 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3") TEST_UNSUPPORTED(".word 0xe0500090 @ undef") TEST_UNSUPPORTED(".word 0xe05fff9f @ undef") +#endif +#if __LINUX_ARM_ARCH__ >= 7 TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13") @@ -456,6 +458,8 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */ #if __LINUX_ARM_ARCH__ >= 6 TEST_UNSUPPORTED("ldrex r2, [sp]") +#endif +#if (__LINUX_ARM_ARCH__ >= 7) || defined(CONFIG_CPU_32v6K) TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]") TEST_UNSUPPORTED("ldrexd r2, r3, [sp]") TEST_UNSUPPORTED("strexb r0, r2, [sp]") diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index e29c3337ca8..8ef8c933780 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -45,10 +45,9 @@ int machine_kexec_prepare(struct kimage *image) for (i = 0; i < image->nr_segments; i++) { current_segment = &image->segment[i]; - err = memblock_is_region_memory(current_segment->mem, - current_segment->memsz); - if (err) - return - EINVAL; + if (!memblock_is_region_memory(current_segment->mem, + current_segment->memsz)) + return -EINVAL; err = get_user(header, (__be32*)current_segment->buf); if (err) diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 93971b1a4f0..53c0304b734 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -96,6 +96,10 @@ armpmu_event_set_period(struct perf_event *event, s64 period = hwc->sample_period; int ret = 0; + /* The period may have been changed by PERF_EVENT_IOC_PERIOD */ + if (unlikely(period != hwc->last_period)) + left = period - (hwc->last_period - left); + if (unlikely(left <= -period)) { left = period; local64_set(&hwc->period_left, left); diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index e21bac20d90..fc6692e2b60 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -107,13 +107,6 @@ static void sched_clock_poll(unsigned long wrap_ticks) update_sched_clock(); } -void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, - unsigned long rate) -{ - setup_sched_clock(read, bits, rate); - cd.needs_suspend = true; -} - void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; @@ -189,18 +182,15 @@ void __init sched_clock_postinit(void) static int sched_clock_suspend(void) { sched_clock_poll(sched_clock_timer.data); - if (cd.needs_suspend) - cd.suspended = true; + cd.suspended = true; return 0; } static void sched_clock_resume(void) { - if (cd.needs_suspend) { - cd.epoch_cyc = read_sched_clock(); - cd.epoch_cyc_copy = cd.epoch_cyc; - cd.suspended = false; - } + cd.epoch_cyc = read_sched_clock(); + cd.epoch_cyc_copy = cd.epoch_cyc; + cd.suspended = false; } static struct syscore_ops sched_clock_ops = { diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 8e20754dd31..fbc8b2623d8 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -294,18 +294,24 @@ static void percpu_timer_setup(void); asmlinkage void __cpuinit secondary_start_kernel(void) { struct mm_struct *mm = &init_mm; - unsigned int cpu = smp_processor_id(); + unsigned int cpu; + + /* + * The identity mapping is uncached (strongly ordered), so + * switch away from it before attempting any exclusive accesses. + */ + cpu_switch_mm(mm->pgd, mm); + enter_lazy_tlb(mm, current); + local_flush_tlb_all(); /* * All kernel threads share the same mm context; grab a * reference and switch to it. */ + cpu = smp_processor_id(); atomic_inc(&mm->mm_count); current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); - cpu_switch_mm(mm->pgd, mm); - enter_lazy_tlb(mm, current); - local_flush_tlb_all(); printk("CPU%u: Booted secondary processor\n", cpu); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index e1f906989bb..b22d700fea2 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -42,10 +42,10 @@ static void twd_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - /* timer load already set up */ ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_PERIODIC; - __raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD); + __raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ), + twd_base + TWD_TIMER_LOAD); break; case CLOCK_EVT_MODE_ONESHOT: /* period set, and timer enabled in 'next_event' hook */ diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 9d0a30032d7..0dc53854a5d 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -45,6 +45,7 @@ int read_current_timer(unsigned long *timer_val) *timer_val = delay_timer->read_current_timer(); return 0; } +EXPORT_SYMBOL_GPL(read_current_timer); static void __timer_delay(unsigned long cycles) { diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index b1420710193..043624219b5 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -21,19 +21,13 @@ config SOC_AT91SAM9 bool select CPU_ARM926T select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER + select SPARSE_IRQ menu "Atmel AT91 System-on-Chip" comment "Atmel AT91 Processor" -config SOC_AT91SAM9 - bool - select AT91_SAM9_SMC - select AT91_SAM9_TIME - select CPU_ARM926T - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index b4f0565aff6..5269825194a 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -187,7 +187,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a563189cdfc..3cee0e6ea7c 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -68,7 +68,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -479,7 +479,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -512,7 +512,7 @@ static struct resource twi_resources[] = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-at91rm9200", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index ad29f93f20c..f8202615f4a 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -211,8 +211,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index a76b8684f52..414bd855fb0 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -389,7 +389,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9260_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -421,7 +421,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9260_twi_device = { - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 8d999eb1a13..04295c04b3e 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,8 +178,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 9752f17efba..cd604aad8e9 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -285,7 +285,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9261_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -317,7 +317,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9261_twi_device = { - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 6a01d0360df..d6f9c23927c 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -193,7 +193,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 8dde220b42b..9c61e59a210 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -78,7 +78,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -567,7 +567,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -600,7 +600,7 @@ static struct resource twi_resources[] = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-at91sam9260", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index b1596072dcc..fcd233cb33d 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1841,8 +1841,8 @@ static struct resource sha_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; @@ -1874,8 +1874,8 @@ static struct resource tdes_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; @@ -1910,8 +1910,8 @@ static struct resource aes_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index d6ca0543ce8..5047bdc92ad 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -314,7 +314,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -347,7 +347,7 @@ static struct resource twi_resources[] = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-at91sam9g20", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 6bd7300a2bc..bb7f54474b9 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -88,6 +88,6 @@ void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS]) if (!priority) priority = at91x40_default_irq_priority; - at91_aic_init(priority); + at91_aic_init(priority, at91_extern_irq); } diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 9cda3fd346a..6960778af4c 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -129,7 +129,7 @@ static struct spi_board_info neocore926_spi_devices[] = { .max_speed_hz = 125000 * 16, .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9263_ID_IRQ1, + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, }, #endif }; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 27b3af1a304..a9167dd45f9 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -309,7 +309,7 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9261_ID_IRQ0, + .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0, .controller_data = (void *) AT91_PIN_PA28, /* CS pin */ }, #endif diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 073e17403d9..b87dbe2be0d 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -132,7 +132,7 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9263_ID_IRQ1, + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, }, #endif }; diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index f4965067765..b62f560e6c7 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -26,7 +26,8 @@ extern void __init at91_dt_initialize(void); extern void __init at91_init_irq_default(void); extern void __init at91_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); -extern void __init at91_aic_init(unsigned int priority[]); +extern void __init at91_aic_init(unsigned int priority[], + unsigned int ext_irq_mask); extern int __init at91_aic_of_init(struct device_node *node, struct device_node *parent); extern int __init at91_aic5_of_init(struct device_node *node, diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 1e02c0e49dc..febc2ee901a 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -502,14 +502,19 @@ int __init at91_aic5_of_init(struct device_node *node, /* * Initialize the AIC interrupt controller. */ -void __init at91_aic_init(unsigned int *priority) +void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask) { unsigned int i; int irq_base; - if (at91_aic_pm_init()) + at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) + * sizeof(*at91_extern_irq), GFP_KERNEL); + + if (at91_aic_pm_init() || at91_extern_irq == NULL) panic("Unable to allocate bit maps\n"); + *at91_extern_irq = ext_irq_mask; + at91_aic_base = ioremap(AT91_AIC, 512); if (!at91_aic_base) panic("Unable to ioremap AIC registers\n"); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index da9881b161e..0b32c81730a 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -47,7 +47,7 @@ void __init at91_init_irq_default(void) void __init at91_init_interrupts(unsigned int *priority) { /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); + at91_aic_init(priority, at91_extern_irq); /* Enable GPIO interrupts */ at91_gpio_irq_setup(); @@ -151,7 +151,7 @@ static void __init soc_detect(u32 dbgu_base) } /* at91sam9g10 */ - if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { + if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { at91_soc_initdata.type = AT91_SOC_SAM9G10; at91_boot_soc = at91sam9261_soc; } diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index cd0c8b1e1ec..14e9947bad6 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -713,8 +713,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, break; case VPBE_ENC_CUSTOM_TIMINGS: if (pclock <= 27000000) { - v |= DM644X_VPSS_MUXSEL_PLL2_MODE | - DM644X_VPSS_DACCLKEN; + v |= DM644X_VPSS_DACCLKEN; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); } else { /* diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index b37bef1d5ff..f723fe13d0f 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -32,6 +32,7 @@ #include <linux/irq.h> #include <plat/time.h> #include <linux/platform_data/usb-ehci-orion.h> +#include <plat/irq.h> #include <plat/common.h> #include <plat/addr-map.h> #include "common.h" @@ -109,8 +110,8 @@ static void __init dove_clk_init(void) orion_clkdev_add(NULL, "orion-ehci.0", usb0); orion_clkdev_add(NULL, "orion-ehci.1", usb1); - orion_clkdev_add(NULL, "mv643xx_eth.0", ge); - orion_clkdev_add("0", "sata_mv.0", sata); + orion_clkdev_add(NULL, "mv643xx_eth_port.0", ge); + orion_clkdev_add(NULL, "sata_mv.0", sata); orion_clkdev_add("0", "pcie", pex0); orion_clkdev_add("1", "pcie", pex1); orion_clkdev_add(NULL, "sdhci-dove.0", sdio0); @@ -399,7 +400,7 @@ static void __init dove_dt_init(void) (dove_tclk + 499999) / 1000000); #ifdef CONFIG_CACHE_TAUROS2 - tauros2_init(); + tauros2_init(0); #endif dove_setup_cpu_mbus(); @@ -415,7 +416,6 @@ static void __init dove_dt_init(void) dove_ehci0_init(); dove_ehci1_init(); dove_pcie_init(1, 1); - dove_crypto_init(); of_platform_populate(NULL, of_default_bus_match_table, dove_auxdata_lookup, NULL); diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index bb15b26041c..0ef4435b165 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/clk.h> #include <video/vga.h> #include <asm/mach/pci.h> #include <asm/mach/arch.h> @@ -188,6 +189,10 @@ static void __init add_pcie_port(int index, void __iomem *base) if (orion_pcie_link_up(base)) { struct pcie_port *pp = &pcie_port[num_pcie_ports++]; + struct clk *clk = clk_get_sys("pcie", (index ? "1" : "0")); + + if (!IS_ERR(clk)) + clk_prepare_enable(clk); printk(KERN_INFO "link up\n"); diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 715b690e500..1947be8e5f5 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -47,6 +47,7 @@ #include <plat/fimc-core.h> #include <plat/iic-core.h> #include <plat/tv-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include "common.h" @@ -346,6 +347,8 @@ static void __init exynos4_map_io(void) s5p_fb_setname(0, "exynos4-fb"); s5p_hdmi_setname("exynos4-hdmi"); + + s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos5_map_io(void) @@ -366,6 +369,8 @@ static void __init exynos5_map_io(void) s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); s3c_i2c2_setname("s3c2440-i2c"); + + s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos4_init_clocks(int xtal) diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index 21d568b3b14..87e07d6fc61 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -275,6 +275,9 @@ static int __init exynos_dma_init(void) exynos_pdma1_pdata.nr_valid_peri = ARRAY_SIZE(exynos4210_pdma1_peri); exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri; + + if (samsung_rev() == EXYNOS4210_REV_0) + exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1; } else if (soc_is_exynos4212() || soc_is_exynos4412()) { exynos_pdma0_pdata.nr_valid_peri = ARRAY_SIZE(exynos4212_pdma0_peri); diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 8480849affb..ed4da4544cd 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -90,6 +90,7 @@ #define EXYNOS4_PA_MDMA0 0x10810000 #define EXYNOS4_PA_MDMA1 0x12850000 +#define EXYNOS4_PA_S_MDMA1 0x12840000 #define EXYNOS4_PA_PDMA0 0x12680000 #define EXYNOS4_PA_PDMA1 0x12690000 #define EXYNOS5_PA_MDMA0 0x10800000 diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index e58d786faf7..eadf4b59e7d 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -99,6 +99,7 @@ static char const *exynos4_dt_compat[] __initdata = { DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ + .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = exynos4_dt_map_io, .handle_irq = gic_handle_irq, diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c index 82c27230d4a..86e37cd9376 100644 --- a/arch/arm/mach-highbank/system.c +++ b/arch/arm/mach-highbank/system.c @@ -28,6 +28,7 @@ void highbank_restart(char mode, const char *cmd) hignbank_set_pwr_soft_reset(); scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); - cpu_do_idle(); + while (1) + cpu_do_idle(); } diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c index 1a7a8dd045a..1ab91b5209e 100644 --- a/arch/arm/mach-imx/clk-busy.c +++ b/arch/arm/mach-imx/clk-busy.c @@ -108,7 +108,7 @@ struct clk *imx_clk_busy_divider(const char *name, const char *parent_name, busy->div.hw.init = &init; clk = clk_register(NULL, &busy->div.hw); - if (!clk) + if (IS_ERR(clk)) kfree(busy); return clk; diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 3c1b8ff9a0a..cc49c7ae186 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -112,7 +112,7 @@ struct clk *clk_register_gate2(struct device *dev, const char *name, clk = clk_register(dev, &gate->hw); if (IS_ERR(clk)) - kfree(clk); + kfree(gate); return clk; } diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index d20d4795f4e..01e2f843bf2 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -127,8 +127,8 @@ int __init mx25_clocks_init(void) clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4); clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5); clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6); - clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0), 7); - clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0), 8); + clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7); + clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8); clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13); clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14); clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 3b6b640eed2..366e5d59d88 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -109,7 +109,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6); clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6); clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks)); - clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3); + clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6); clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3); clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks)); clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks)); @@ -121,7 +121,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6); - clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3); + clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6); clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0); clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0); clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1); diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c index 412c583a24b..576af744695 100644 --- a/arch/arm/mach-imx/ehci-imx25.c +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -30,7 +30,7 @@ #define MX25_H1_SIC_SHIFT 21 #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) #define MX25_H1_PP_BIT (1 << 18) -#define MX25_H1_PM_BIT (1 << 8) +#define MX25_H1_PM_BIT (1 << 16) #define MX25_H1_IPPUE_UP_BIT (1 << 7) #define MX25_H1_IPPUE_DOWN_BIT (1 << 6) #define MX25_H1_TLL_BIT (1 << 5) diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index 779e16eb65c..293397852e4 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -30,7 +30,7 @@ #define MX35_H1_SIC_SHIFT 21 #define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) #define MX35_H1_PP_BIT (1 << 18) -#define MX35_H1_PM_BIT (1 << 8) +#define MX35_H1_PM_BIT (1 << 16) #define MX35_H1_IPPUE_UP_BIT (1 << 7) #define MX35_H1_IPPUE_DOWN_BIT (1 << 6) #define MX35_H1_TLL_BIT (1 << 5) diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9d2c843bde0..b5deb055455 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -108,9 +108,8 @@ void __init imx3_init_l2x0(void) } l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); - if (IS_ERR(l2x0_base)) { - printk(KERN_ERR "remapping L2 cache area failed with %ld\n", - PTR_ERR(l2x0_base)); + if (!l2x0_base) { + printk(KERN_ERR "remapping L2 cache area failed\n"); return; } diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 70c5a288240..d94872fed8c 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -51,9 +51,7 @@ static void __init kirkwood_dt_init(void) kirkwood_setup_cpu_mbus(); -#ifdef CONFIG_CACHE_FEROCEON_L2 kirkwood_l2_init(); -#endif /* Setup root of clk tree */ kirkwood_clk_init(); diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 3991077f58a..2c6c218fb79 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -633,6 +633,7 @@ char * __init kirkwood_id(void) void __init kirkwood_l2_init(void) { +#ifdef CONFIG_CACHE_FEROCEON_L2 #ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG); feroceon_l2_init(1); @@ -640,6 +641,7 @@ void __init kirkwood_l2_init(void) writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG); feroceon_l2_init(0); #endif +#endif } void __init kirkwood_init(void) @@ -657,9 +659,7 @@ void __init kirkwood_init(void) kirkwood_setup_cpu_mbus(); -#ifdef CONFIG_CACHE_FEROCEON_L2 kirkwood_l2_init(); -#endif /* Setup root of clk tree */ kirkwood_clk_init(); diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 9518bf5996d..e255164ff08 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -444,16 +444,28 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = { .lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */ }; +static struct platform_device ams_delta_audio_device = { + .name = "ams-delta-audio", + .id = -1, +}; + +static struct platform_device cx20442_codec_device = { + .name = "cx20442-codec", + .id = -1, +}; + static struct platform_device *ams_delta_devices[] __initdata = { &latch1_gpio_device, &latch2_gpio_device, &ams_delta_kp_device, &ams_delta_camera_device, + &ams_delta_audio_device, }; static struct platform_device *late_devices[] __initdata = { &ams_delta_nand_device, &ams_delta_lcd_device, + &cx20442_codec_device, }; static void __init ams_delta_init(void) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 2a1a898c7f9..d669e227e00 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -11,7 +11,6 @@ config ARCH_OMAP2PLUS_TYPICAL select I2C_OMAP select MENELAUS if ARCH_OMAP2 select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 - select PINCTRL select PM_RUNTIME select REGULATOR select SERIAL_OMAP diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 48d5e41dfbf..37859069444 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -580,6 +580,11 @@ static void __init igep_wlan_bt_init(void) } else return; + /* Make sure that the GPIO pins are muxed correctly */ + omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT); + err = gpio_request_array(igep_wlan_bt_gpios, ARRAY_SIZE(igep_wlan_bt_gpios)); if (err) { diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 388c431c745..d41ab98890f 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -24,6 +24,7 @@ #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/opp.h> +#include <linux/cpu.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -444,27 +445,31 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static void __init beagle_opp_init(void) +static int __init beagle_opp_init(void) { int r = 0; - /* Initialize the omap3 opp table */ - if (omap3_opp_init()) { + if (!machine_is_omap3_beagle()) + return 0; + + /* Initialize the omap3 opp table if not already created. */ + r = omap3_opp_init(); + if (IS_ERR_VALUE(r) && (r != -EEXIST)) { pr_err("%s: opp default init failed\n", __func__); - return; + return r; } /* Custom OPP enabled for all xM versions */ if (cpu_is_omap3630()) { struct device *mpu_dev, *iva_dev; - mpu_dev = omap_device_get_by_hwmod_name("mpu"); + mpu_dev = get_cpu_device(0); iva_dev = omap_device_get_by_hwmod_name("iva"); if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", __func__, mpu_dev, iva_dev); - return; + return -ENODEV; } /* Enable MPU 1GHz and lower opps */ r = opp_enable(mpu_dev, 800000000); @@ -484,8 +489,9 @@ static void __init beagle_opp_init(void) opp_disable(iva_dev, 660000000); } } - return; + return 0; } +device_initcall(beagle_opp_init); static void __init omap3_beagle_init(void) { @@ -522,8 +528,6 @@ static void __init omap3_beagle_init(void) /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - - beagle_opp_init(); } MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 114ab4b8e0e..1a45d6bd253 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1073,6 +1073,8 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX), CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX), CLK(NULL, "clkout2_ck", &clkout2_ck, CK_AM33XX), + CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX), + CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX), }; int __init am33xx_clk_init(void) diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index d661d138f27..6efc30c961a 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3294,7 +3294,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck, CK_443X), CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X), CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X), - CLK(NULL, "gpmc_ck", &dummy_ck, CK_443X), + CLK("omap-gpmc", "fck", &dummy_ck, CK_443X), CLK("omap_i2c.1", "ick", &dummy_ck, CK_443X), CLK("omap_i2c.2", "ick", &dummy_ck, CK_443X), CLK("omap_i2c.3", "ick", &dummy_ck, CK_443X), diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index cbb879139c5..512e79a842c 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -925,15 +925,18 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable) return -EINVAL; + spin_lock_irqsave(&clkdm->lock, flags); + /* * For arch's with no autodeps, clkcm_clk_enable * should be called for every clock instance or hwmod that is * enabled, so the clkdm can be force woken up. */ - if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) + if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) { + spin_unlock_irqrestore(&clkdm->lock, flags); return 0; + } - spin_lock_irqsave(&clkdm->lock, flags); arch_clkdm->clkdm_clk_enable(clkdm); pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); @@ -950,15 +953,19 @@ static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm) if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) return -EINVAL; + spin_lock_irqsave(&clkdm->lock, flags); + if (atomic_read(&clkdm->usecount) == 0) { + spin_unlock_irqrestore(&clkdm->lock, flags); WARN_ON(1); /* underflow */ return -ERANGE; } - if (atomic_dec_return(&clkdm->usecount) > 0) + if (atomic_dec_return(&clkdm->usecount) > 0) { + spin_unlock_irqrestore(&clkdm->lock, flags); return 0; + } - spin_lock_irqsave(&clkdm->lock, flags); arch_clkdm->clkdm_clk_disable(clkdm); pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index b56d06b4878..95192a062d5 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -359,7 +359,7 @@ static struct clockdomain iss_44xx_clkdm = { .clkdm_offs = OMAP4430_CM2_CAM_CAM_CDOFFS, .wkdep_srcs = iss_wkup_sleep_deps, .sleepdep_srcs = iss_wkup_sleep_deps, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_SWSUP, }; static struct clockdomain l3_dss_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 48daac2581b..84551f205e4 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -64,30 +64,36 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct spi_board_info *spi_bi = &ads7846_spi_board_info; int err; - err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); - if (err) { - pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); - return; - } + /* + * If a board defines get_pendown_state() function, request the pendown + * GPIO and set the GPIO debounce time. + * If a board does not define the get_pendown_state() function, then + * the ads7846 driver will setup the pendown GPIO itself. + */ + if (board_pdata && board_pdata->get_pendown_state) { + err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); + if (err) { + pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); + return; + } - if (gpio_debounce) - gpio_set_debounce(gpio_pendown, gpio_debounce); + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); + + gpio_export(gpio_pendown, 0); + } spi_bi->bus_num = bus_num; spi_bi->irq = gpio_to_irq(gpio_pendown); + ads7846_config.gpio_pendown = gpio_pendown; + if (board_pdata) { board_pdata->gpio_pendown = gpio_pendown; + board_pdata->gpio_pendown_debounce = gpio_debounce; spi_bi->platform_data = board_pdata; - if (board_pdata->get_pendown_state) - gpio_export(gpio_pendown, 0); - } else { - ads7846_config.gpio_pendown = gpio_pendown; } - if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state)) - gpio_free(gpio_pendown); - spi_register_board_info(&ads7846_spi_board_info, 1); } #else diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c8c211731d2..c72b5a72772 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -19,6 +19,7 @@ #include <linux/of.h> #include <linux/pinctrl/machine.h> #include <linux/platform_data/omap4-keypad.h> +#include <linux/platform_data/omap_ocp2scp.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -341,7 +342,7 @@ static void __init omap_init_dmic(void) oh = omap_hwmod_lookup("dmic"); if (!oh) { - printk(KERN_ERR "Could not look up mcpdm hw_mod\n"); + pr_err("Could not look up dmic hw_mod\n"); return; } @@ -613,6 +614,83 @@ static void omap_init_vout(void) static inline void omap_init_vout(void) {} #endif +#if defined(CONFIG_OMAP_OCP2SCP) || defined(CONFIG_OMAP_OCP2SCP_MODULE) +static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev) +{ + int cnt = 0; + + while (ocp2scp_dev->drv_name != NULL) { + cnt++; + ocp2scp_dev++; + } + + return cnt; +} + +static void omap_init_ocp2scp(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + int bus_id = -1, dev_cnt = 0, i; + struct omap_ocp2scp_dev *ocp2scp_dev; + const char *oh_name, *name; + struct omap_ocp2scp_platform_data *pdata; + + if (!cpu_is_omap44xx()) + return; + + oh_name = "ocp2scp_usb_phy"; + name = "omap-ocp2scp"; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("%s: could not find omap_hwmod for %s\n", __func__, + oh_name); + return; + } + + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + pr_err("%s: No memory for ocp2scp pdata\n", __func__); + return; + } + + ocp2scp_dev = oh->dev_attr; + dev_cnt = count_ocp2scp_devices(ocp2scp_dev); + + if (!dev_cnt) { + pr_err("%s: No devices connected to ocp2scp\n", __func__); + kfree(pdata); + return; + } + + pdata->devices = kzalloc(sizeof(struct omap_ocp2scp_dev *) + * dev_cnt, GFP_KERNEL); + if (!pdata->devices) { + pr_err("%s: No memory for ocp2scp pdata devices\n", __func__); + kfree(pdata); + return; + } + + for (i = 0; i < dev_cnt; i++, ocp2scp_dev++) + pdata->devices[i] = ocp2scp_dev; + + pdata->dev_cnt = dev_cnt; + + pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata), NULL, + 0, false); + if (IS_ERR(pdev)) { + pr_err("Could not build omap_device for %s %s\n", + name, oh_name); + kfree(pdata->devices); + kfree(pdata); + return; + } +} +#else +static inline void omap_init_ocp2scp(void) { } +#endif + /*-------------------------------------------------------------------------*/ static int __init omap2_init_devices(void) @@ -640,6 +718,7 @@ static int __init omap2_init_devices(void) omap_init_sham(); omap_init_aes(); omap_init_vout(); + omap_init_ocp2scp(); return 0; } diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 5ac5cf30406..92b5718fa72 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -868,9 +868,9 @@ static void __devexit gpmc_mem_exit(void) } -static void __devinit gpmc_mem_init(void) +static int __devinit gpmc_mem_init(void) { - int cs; + int cs, rc; unsigned long boot_rom_space = 0; /* never allocate the first page, to facilitate bug detection; @@ -890,13 +890,21 @@ static void __devinit gpmc_mem_init(void) if (!gpmc_cs_mem_enabled(cs)) continue; gpmc_cs_get_memconf(cs, &base, &size); - if (gpmc_cs_insert_mem(cs, base, size) < 0) - BUG(); + rc = gpmc_cs_insert_mem(cs, base, size); + if (IS_ERR_VALUE(rc)) { + while (--cs >= 0) + if (gpmc_cs_mem_enabled(cs)) + gpmc_cs_delete_mem(cs); + return rc; + } } + + return 0; } static __devinit int gpmc_probe(struct platform_device *pdev) { + int rc; u32 l; struct resource *res; @@ -936,7 +944,13 @@ static __devinit int gpmc_probe(struct platform_device *pdev) dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l), GPMC_REVISION_MINOR(l)); - gpmc_mem_init(); + rc = gpmc_mem_init(); + if (IS_ERR_VALUE(rc)) { + clk_disable_unprepare(gpmc_l3_clk); + clk_put(gpmc_l3_clk); + dev_err(gpmc_dev, "failed to reserve memory\n"); + return rc; + } if (IS_ERR_VALUE(gpmc_setup_irq())) dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 17f80e4ab16..c47140bbbec 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -614,16 +614,16 @@ static struct omap_mux __initdata omap3_muxmodes[] = { "sys_off_mode", NULL, NULL, NULL, "gpio_9", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_CTS, 150, - "uart1_cts", NULL, NULL, NULL, + "uart1_cts", "ssi1_rdy_tx", NULL, NULL, "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_RTS, 149, - "uart1_rts", NULL, NULL, NULL, + "uart1_rts", "ssi1_flag_tx", NULL, NULL, "gpio_149", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_RX, 151, - "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk", + "uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk", "gpio_151", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_TX, 148, - "uart1_tx", NULL, NULL, NULL, + "uart1_tx", "ssi1_dat_tx", NULL, NULL, "gpio_148", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART2_CTS, 144, "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL, diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index b969ab1d258..87cc6d058de 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -422,6 +422,38 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v) } /** + * _wait_softreset_complete - wait for an OCP softreset to complete + * @oh: struct omap_hwmod * to wait on + * + * Wait until the IP block represented by @oh reports that its OCP + * softreset is complete. This can be triggered by software (see + * _ocp_softreset()) or by hardware upon returning from off-mode (one + * example is HSMMC). Waits for up to MAX_MODULE_SOFTRESET_WAIT + * microseconds. Returns the number of microseconds waited. + */ +static int _wait_softreset_complete(struct omap_hwmod *oh) +{ + struct omap_hwmod_class_sysconfig *sysc; + u32 softrst_mask; + int c = 0; + + sysc = oh->class->sysc; + + if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS) + omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + else if (sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { + softrst_mask = (0x1 << sysc->sysc_fields->srst_shift); + omap_test_timeout(!(omap_hwmod_read(oh, sysc->sysc_offs) + & softrst_mask), + MAX_MODULE_SOFTRESET_WAIT, c); + } + + return c; +} + +/** * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v * @oh: struct omap_hwmod * * @@ -1282,6 +1314,18 @@ static void _enable_sysc(struct omap_hwmod *oh) if (!oh->class->sysc) return; + /* + * Wait until reset has completed, this is needed as the IP + * block is reset automatically by hardware in some cases + * (off-mode for example), and the drivers require the + * IP to be ready when they access it + */ + if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) + _enable_optional_clocks(oh); + _wait_softreset_complete(oh); + if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) + _disable_optional_clocks(oh); + v = oh->_sysc_cache; sf = oh->class->sysc->sysc_flags; @@ -1804,7 +1848,7 @@ static int _am33xx_disable_module(struct omap_hwmod *oh) */ static int _ocp_softreset(struct omap_hwmod *oh) { - u32 v, softrst_mask; + u32 v; int c = 0; int ret = 0; @@ -1834,19 +1878,7 @@ static int _ocp_softreset(struct omap_hwmod *oh) if (oh->class->sysc->srst_udelay) udelay(oh->class->sysc->srst_udelay); - if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) - omap_test_timeout((omap_hwmod_read(oh, - oh->class->sysc->syss_offs) - & SYSS_RESETDONE_MASK), - MAX_MODULE_SOFTRESET_WAIT, c); - else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { - softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift); - omap_test_timeout(!(omap_hwmod_read(oh, - oh->class->sysc->sysc_offs) - & softrst_mask), - MAX_MODULE_SOFTRESET_WAIT, c); - } - + c = _wait_softreset_complete(oh); if (c == MAX_MODULE_SOFTRESET_WAIT) pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n", oh->name, MAX_MODULE_SOFTRESET_WAIT); @@ -2352,6 +2384,9 @@ static int __init _setup_reset(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_INITIALIZED) return -EINVAL; + if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK) + return -EPERM; + if (oh->rst_lines_cnt == 0) { r = _enable(oh); if (r) { diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 652d0285bd6..0b1249e0039 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> #include <linux/power/smartreflex.h> +#include <linux/platform_data/omap_ocp2scp.h> #include <plat/omap_hwmod.h> #include <plat/i2c.h> @@ -2125,6 +2126,14 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { .name = "mcpdm", .class = &omap44xx_mcpdm_hwmod_class, .clkdm_name = "abe_clkdm", + /* + * It's suspected that the McPDM requires an off-chip main + * functional clock, controlled via I2C. This IP block is + * currently reset very early during boot, before I2C is + * available, so it doesn't seem that we have any choice in + * the kernel other than to avoid resetting it. + */ + .flags = HWMOD_EXT_OPT_MAIN_CLK, .mpu_irqs = omap44xx_mcpdm_irqs, .sdma_reqs = omap44xx_mcpdm_sdma_reqs, .main_clk = "mcpdm_fck", @@ -2681,6 +2690,32 @@ static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = { .sysc = &omap44xx_ocp2scp_sysc, }; +/* ocp2scp dev_attr */ +static struct resource omap44xx_usb_phy_and_pll_addrs[] = { + { + .name = "usb_phy", + .start = 0x4a0ad080, + .end = 0x4a0ae000, + .flags = IORESOURCE_MEM, + }, + { + /* XXX: Remove this once control module driver is in place */ + .name = "ctrl_dev", + .start = 0x4a002300, + .end = 0x4a002303, + .flags = IORESOURCE_MEM, + }, + { } +}; + +static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = { + { + .drv_name = "omap-usb2", + .res = omap44xx_usb_phy_and_pll_addrs, + }, + { } +}; + /* ocp2scp_usb_phy */ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .name = "ocp2scp_usb_phy", @@ -2694,6 +2729,7 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, + .dev_attr = ocp2scp_dev_attr, }; /* diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 686137d164d..67d66131cfa 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -91,6 +91,7 @@ extern void omap3_save_scratchpad_contents(void); #define PM_RTA_ERRATUM_i608 (1 << 0) #define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1) +#define PM_PER_MEMORIES_ERRATUM_i582 (1 << 2) #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) extern u16 pm34xx_errata; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index ba670db1fd3..3a904de4313 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -652,14 +652,17 @@ static void __init pm_errata_configure(void) /* Enable the l2 cache toggling in sleep logic */ enable_omap3630_toggle_l2_on_restore(); if (omap_rev() < OMAP3630_REV_ES1_2) - pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583; + pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 | + PM_PER_MEMORIES_ERRATUM_i582); + } else if (cpu_is_omap34xx()) { + pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582; } } int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; - struct clockdomain *neon_clkdm, *mpu_clkdm; + struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm; int ret; if (!omap3_has_io_chain_ctrl()) @@ -711,6 +714,8 @@ int __init omap3_pm_init(void) neon_clkdm = clkdm_lookup("neon_clkdm"); mpu_clkdm = clkdm_lookup("mpu_clkdm"); + per_clkdm = clkdm_lookup("per_clkdm"); + wkup_clkdm = clkdm_lookup("wkup_clkdm"); #ifdef CONFIG_SUSPEND omap_pm_suspend = omap3_pm_suspend; @@ -727,6 +732,27 @@ int __init omap3_pm_init(void) if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608)) omap3630_ctrl_disable_rta(); + /* + * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are + * not correctly reset when the PER powerdomain comes back + * from OFF or OSWR when the CORE powerdomain is kept active. + * See OMAP36xx Erratum i582 "PER Domain reset issue after + * Domain-OFF/OSWR Wakeup". This wakeup dependency is not a + * complete workaround. The kernel must also prevent the PER + * powerdomain from going to OSWR/OFF while the CORE + * powerdomain is not going to OSWR/OFF. And if PER last + * power state was off while CORE last power state was ON, the + * UART3/4 and McBSP2/3 SIDETONE devices need to run a + * self-test using their loopback tests; if that fails, those + * devices are unusable until the PER/CORE can complete a transition + * from ON to OSWR/OFF and then back to ON. + * + * XXX Technically this workaround is only needed if off-mode + * or OSWR is enabled. + */ + if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582)) + clkdm_add_wkdep(per_clkdm, wkup_clkdm); + clkdm_add_wkdep(neon_clkdm, mpu_clkdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { omap3_secure_ram_storage = diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0405c819080..a507cd6cf4f 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -329,6 +329,11 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); + if (console_uart_id == bdata->id) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } + oh->dev_attr = uart; if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 44f9aa7ec0c..69e46631a7c 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -467,7 +467,7 @@ OMAP_SYS_TIMER(3_am33xx) #ifdef CONFIG_ARCH_OMAP4 #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START); + OMAP44XX_LOCAL_TWD_BASE, 29); #endif static void __init omap4_timer_init(void) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 635e109f5ad..a256135d8e4 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -73,6 +73,7 @@ void __init omap4_pmic_init(const char *pmic_type, { /* PMIC part*/ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); + omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT); omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data); /* Register additional devices on i2c1 bus if needed */ @@ -366,7 +367,7 @@ static struct regulator_init_data omap4_clk32kg_idata = { }; static struct regulator_consumer_supply omap4_vdd1_supply[] = { - REGULATOR_SUPPLY("vcc", "mpu.0"), + REGULATOR_SUPPLY("vcc", "cpu0"), }; static struct regulator_consumer_supply omap4_vdd2_supply[] = { diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 880249b1701..75878c37959 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -264,7 +264,7 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) if (initialized) { if (voltdm->pmic->i2c_high_speed != i2c_high_speed) - pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).", + pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).\n", __func__, voltdm->name, i2c_high_speed); return; } diff --git a/arch/arm/mach-prima2/include/mach/gpio.h b/arch/arm/mach-prima2/include/mach/gpio.h deleted file mode 100644 index 1904bb03876..00000000000 --- a/arch/arm/mach-prima2/include/mach/gpio.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __MACH_GPIO_H -#define __MACH_GPIO_H - -/* Pull up/down values */ -enum sirfsoc_gpio_pull { - SIRFSOC_GPIO_PULL_NONE, - SIRFSOC_GPIO_PULL_UP, - SIRFSOC_GPIO_PULL_DOWN, -}; - -void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode); - -#endif diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 5ecbd17b564..e2c6391863f 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -28,6 +28,7 @@ #include <linux/mfd/asic3.h> #include <linux/mtd/physmap.h> #include <linux/pda_power.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/regulator/driver.h> #include <linux/regulator/gpio-regulator.h> @@ -556,7 +557,7 @@ static struct platform_device hx4700_lcd = { */ static struct platform_pwm_backlight_data backlight_data = { - .pwm_id = 1, + .pwm_id = -1, /* Superseded by pwm_lookup */ .max_brightness = 200, .dft_brightness = 100, .pwm_period_ns = 30923, @@ -571,6 +572,10 @@ static struct platform_device backlight = { }, }; +static struct pwm_lookup hx4700_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL), +}; + /* * USB "Transceiver" */ @@ -872,6 +877,7 @@ static void __init hx4700_init(void) pxa_set_stuart_info(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); + pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup)); pxa_set_ficp_info(&ficp_info); pxa27x_set_i2c_power_info(NULL); diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 438f02fe122..842596d4d31 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -86,10 +86,7 @@ static void spitz_discharge1(int on) gpio_set_value(SPITZ_GPIO_LED_GREEN, on); } -static unsigned long gpio18_config[] = { - GPIO18_RDY, - GPIO18_GPIO, -}; +static unsigned long gpio18_config = GPIO18_GPIO; static void spitz_presuspend(void) { @@ -112,7 +109,7 @@ static void spitz_presuspend(void) PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0); - pxa2xx_mfp_config(&gpio18_config[0], 1); + pxa2xx_mfp_config(&gpio18_config, 1); gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown"); gpio_free(18); @@ -131,7 +128,6 @@ static void spitz_presuspend(void) static void spitz_postsuspend(void) { - pxa2xx_mfp_config(&gpio18_config[1], 1); } static int spitz_should_wakeup(unsigned int resume_on_alarm) diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 749220f91a7..4407b173053 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -163,7 +163,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), }; -static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) +static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) { struct clk *clock_upll; struct clk *clock_h; diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index ed5a95ece9e..77ee0b73223 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -61,6 +61,7 @@ #include <plat/nand-core.h> #include <plat/adc-core.h> #include <plat/rtc-core.h> +#include <plat/spi-core.h> static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -132,6 +133,7 @@ void __init s3c2416_map_io(void) /* initialize device information early */ s3c2416_default_sdhci0(); s3c2416_default_sdhci1(); + s3c64xx_spi_setname("s3c2443-spi"); iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); } diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index ab648ad8fa5..165b6a6b3da 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -43,6 +43,7 @@ #include <plat/nand-core.h> #include <plat/adc-core.h> #include <plat/rtc-core.h> +#include <plat/spi-core.h> static struct map_desc s3c2443_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -100,6 +101,9 @@ void __init s3c2443_map_io(void) s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull; s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull; + /* initialize device information early */ + s3c64xx_spi_setname("s3c2443-spi"); + iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); } diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 6e6a0a9d677..111e404a81f 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -44,6 +44,7 @@ #include <plat/sdhci.h> #include <plat/adc-core.h> #include <plat/fb-core.h> +#include <plat/spi-core.h> #include <plat/gpio-cfg.h> #include <plat/regs-irqtype.h> #include <plat/regs-serial.h> @@ -179,6 +180,7 @@ void __init s5p6440_map_io(void) /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s3c64xx_spi_setname("s5p64x0-spi"); s5p64x0_default_sdhci0(); s5p64x0_default_sdhci1(); @@ -193,6 +195,7 @@ void __init s5p6450_map_io(void) /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s3c64xx_spi_setname("s5p64x0-spi"); s5p64x0_default_sdhci0(); s5p64x0_default_sdhci1(); diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index 62190865886..cc6e561c995 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -45,6 +45,7 @@ #include <plat/fb-core.h> #include <plat/iic-core.h> #include <plat/onenand-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include <plat/watchdog-reset.h> @@ -165,6 +166,8 @@ void __init s5pc100_map_io(void) s3c_onenand_setname("s5pc100-onenand"); s3c_fb_setname("s5pc100-fb"); s3c_cfcon_setname("s5pc100-pata"); + + s3c64xx_spi_setname("s5pc100-spi"); } void __init s5pc100_init_clocks(int xtal) diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index 4c9e9027df9..a0c50efe814 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -43,6 +43,7 @@ #include <plat/iic-core.h> #include <plat/keypad-core.h> #include <plat/tv-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include "common.h" @@ -196,6 +197,8 @@ void __init s5pv210_map_io(void) /* setup TV devices */ s5p_hdmi_setname("s5pv210-hdmi"); + + s3c64xx_spi_setname("s5pv210-spi"); } void __init s5pv210_init_clocks(int xtal) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 2912eab3b96..3cc8b1c21da 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1196,7 +1196,7 @@ static void __init eva_init(void) #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 32K*8way */ - l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff); + l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); #endif i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 3cafb6ab5e9..37b2a3133b3 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -24,17 +24,17 @@ #include <linux/clkdev.h> #include <mach/common.h> -#define FRQMR 0xffc80014 -#define MSTPCR0 0xffc80030 -#define MSTPCR1 0xffc80034 -#define MSTPCR3 0xffc8003c -#define MSTPSR1 0xffc80044 -#define MSTPSR4 0xffc80048 -#define MSTPSR6 0xffc8004c -#define MSTPCR4 0xffc80050 -#define MSTPCR5 0xffc80054 -#define MSTPCR6 0xffc80058 -#define MSTPCR7 0xffc80040 +#define FRQMR IOMEM(0xffc80014) +#define MSTPCR0 IOMEM(0xffc80030) +#define MSTPCR1 IOMEM(0xffc80034) +#define MSTPCR3 IOMEM(0xffc8003c) +#define MSTPSR1 IOMEM(0xffc80044) +#define MSTPSR4 IOMEM(0xffc80048) +#define MSTPSR6 IOMEM(0xffc8004c) +#define MSTPCR4 IOMEM(0xffc80050) +#define MSTPCR5 IOMEM(0xffc80054) +#define MSTPCR6 IOMEM(0xffc80058) +#define MSTPCR7 IOMEM(0xffc80040) /* ioremap() through clock mapping mandatory to avoid * collision with ARM coherent DMA virtual memory range. diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 2917668f009..ebbffc25f24 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -247,7 +247,7 @@ void __init r8a7779_add_standard_devices(void) { #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*16way */ - l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff); + l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff); #endif r8a7779_pm_init(); diff --git a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h deleted file mode 100644 index e69de29bb2d..00000000000 --- a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h +++ /dev/null diff --git a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h deleted file mode 100644 index e69de29bb2d..00000000000 --- a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h +++ /dev/null diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 57e235f4ac7..aa5325cd1c4 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -182,7 +182,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)") .init_early = tegra20_init_early, .init_irq = tegra_dt_init_irq, .handle_irq = gic_handle_irq, - .timer = &tegra_timer, + .timer = &tegra_sys_timer, .init_machine = tegra_dt_init, .init_late = tegra_dt_init_late, .restart = tegra_assert_system_reset, diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index e4a676d4ddf..5e92a81f9a2 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -89,7 +89,7 @@ DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)") .init_early = tegra30_init_early, .init_irq = tegra_dt_init_irq, .handle_irq = gic_handle_irq, - .timer = &tegra_timer, + .timer = &tegra_sys_timer, .init_machine = tegra30_dt_init, .init_late = tegra_init_late, .restart = tegra_assert_system_reset, diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index f88e5143c76..91fbe733a21 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -55,5 +55,5 @@ static inline int harmony_pcie_init(void) { return 0; } void __init tegra_paz00_wifikill_init(void); -extern struct sys_timer tegra_timer; +extern struct sys_timer tegra_sys_timer; #endif diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c index cc9b5fd8c3d..8d398a33adf 100644 --- a/arch/arm/mach-tegra/tegra20_clocks_data.c +++ b/arch/arm/mach-tegra/tegra20_clocks_data.c @@ -953,6 +953,7 @@ PERIPH_CLK(pcie_xclk, NULL, "pcie_xclk", 74, 0, 26000000, mux_clk_m, static struct clk *tegra_list_clks[] = { &tegra_apbdma, &tegra_rtc, + &tegra_timer, &tegra_i2s1, &tegra_i2s2, &tegra_spdif_out, diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c index 5cd502c2716..e9de5dfd94e 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -1199,7 +1199,7 @@ static long tegra30_pll_round_rate(struct clk_hw *hw, unsigned long rate, { struct clk_tegra *c = to_clk_tegra(hw); unsigned long input_rate = *prate; - unsigned long output_rate = *prate; + u64 output_rate = *prate; const struct clk_pll_freq_table *sel; struct clk_pll_freq_table cfg; int mul; diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c index d92cb556ae3..3d2e5532a9e 100644 --- a/arch/arm/mach-tegra/tegra30_clocks_data.c +++ b/arch/arm/mach-tegra/tegra30_clocks_data.c @@ -1143,6 +1143,7 @@ struct clk *tegra_list_clks[] = { &tegra_apbdma, &tegra_rtc, &tegra_kbc, + &tegra_timer, &tegra_kfuse, &tegra_fuse, &tegra_fuse_burn, diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index eccdce98304..d3b8c8e7368 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -245,7 +245,7 @@ static void __init tegra_init_timer(void) register_persistent_clock(NULL, tegra_read_persistent_clock); } -struct sys_timer tegra_timer = { +struct sys_timer tegra_sys_timer = { .init = tegra_init_timer, }; diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 2236cbd03cd..1f3fbc2bb77 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -16,6 +16,7 @@ #include <linux/stat.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/irq.h> #include <linux/platform_data/clk-ux500.h> #include <asm/hardware/gic.h> diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index b9f60ebe3bc..b820edaf318 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -745,7 +745,7 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs, static int do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { - union offset_union offset; + union offset_union uninitialized_var(offset); unsigned long instr = 0, instrptr; int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs); unsigned int type; @@ -856,8 +856,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (thumb2_32b) { offset.un = 0; handler = do_alignment_t32_to_handler(&instr, regs, &offset); - } else + } else { + offset.un = 0; handler = do_alignment_ldmstm; + } break; default: diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 477a2d23ddf..58bc3e4d3bd 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -610,7 +610,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pgprot_t prot, bool is_coherent, const void *caller) { u64 mask = get_coherent_dma_mask(dev); - struct page *page; + struct page *page = NULL; void *addr; #ifdef CONFIG_DMA_API_DEBUG diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 86b8b480634..09c5233f4df 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -89,7 +89,7 @@ ENTRY(cpu_v6_dcache_clean_area) mov pc, lr /* - * cpu_arm926_switch_mm(pgd_phys, tsk) + * cpu_v6_switch_mm(pgd_phys, tsk) * * Set the translation table base pointer to be pgd_phys * diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h index bf312c354a2..0f5a5f2a2c7 100644 --- a/arch/arm/mm/vmregion.h +++ b/arch/arm/mm/vmregion.h @@ -17,7 +17,6 @@ struct arm_vmregion { struct list_head vm_list; unsigned long vm_start; unsigned long vm_end; - void *priv; int vm_active; const void *caller; }; diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c index 540d3a7d92d..e7b920b5867 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c @@ -55,7 +55,7 @@ struct platform_device *__init imx_add_mxc_mmc( struct resource res[] = { { .start = data->iobase, - .end = data->iobase + SZ_4K - 1, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { .start = data->irq, diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 7cd56ed5cd9..82fcb206b5b 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -26,6 +26,7 @@ config ARCH_OMAP2PLUS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP select OMAP_DM_TIMER + select PINCTRL select PROC_DEVICETREE if PROC_FS select SPARSE_IRQ select USE_OF diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index c7a4c0902b3..5a4678edd65 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -16,6 +16,7 @@ #include <linux/smc91x.h> #include <mach/hardware.h> +#include "../mach-omap2/debug-devices.h" /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index a5683a84c6e..6013831a043 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -26,12 +26,14 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c-omap.h> #include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> #include <mach/irqs.h> #include <plat/i2c.h> +#include <plat/omap-pm.h> #include <plat/omap_device.h> #define OMAP_I2C_SIZE 0x3f @@ -127,6 +129,16 @@ static inline int omap1_i2c_add_bus(int bus_id) #ifdef CONFIG_ARCH_OMAP2PLUS +/* + * XXX This function is a temporary compatibility wrapper - only + * needed until the I2C driver can be converted to call + * omap_pm_set_max_dev_wakeup_lat() and handle a return code. + */ +static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) +{ + omap_pm_set_max_mpu_wakeup_lat(dev, t); +} + static inline int omap2_i2c_add_bus(int bus_id) { int l; @@ -158,6 +170,15 @@ static inline int omap2_i2c_add_bus(int bus_id) dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; pdata->flags = dev_attr->flags; + /* + * When waiting for completion of a i2c transfer, we need to + * set a wake up latency constraint for the MPU. This is to + * ensure quick enough wakeup from idle, when transfer + * completes. + * Only omap3 has support for constraints + */ + if (cpu_is_omap34xx()) + pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(struct omap_i2c_bus_platform_data), NULL, 0, 0); diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index f4a4cd01479..1957a8516e9 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -40,10 +40,10 @@ #define OMAP_UART_WER_MOD_WKUP 0X7F /* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x8 +#define OMAP_UART_SW_TX 0x04 /* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x2 +#define OMAP_UART_SW_RX 0x04 #define OMAP_UART_SYSC_RESET 0X07 #define OMAP_UART_TCR_TRIG 0X0F diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index b3349f7b1a2..1db02943802 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -443,6 +443,11 @@ struct omap_hwmod_omap4_prcm { * in order to complete the reset. Optional clocks will be disabled * again after the reset. * HWMOD_16BIT_REG: Module has 16bit registers + * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for + * this IP block comes from an off-chip source and is not always + * enabled. This prevents the hwmod code from being able to + * enable and reset the IP block early. XXX Eventually it should + * be possible to query the clock framework for this information. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -453,6 +458,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_NO_IDLEST (1 << 6) #define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) #define HWMOD_16BIT_REG (1 << 8) +#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/plat-samsung/include/plat/spi-core.h b/arch/arm/plat-samsung/include/plat/spi-core.h new file mode 100644 index 00000000000..0b9428ab3fc --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/spi-core.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_S3C_SPI_CORE_H +#define __PLAT_S3C_SPI_CORE_H + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c64xx_spi_setname(char *name) +{ +#ifdef CONFIG_S3C64XX_DEV_SPI0 + s3c64xx_device_spi0.name = name; +#endif +#ifdef CONFIG_S3C64XX_DEV_SPI1 + s3c64xx_device_spi1.name = name; +#endif +#ifdef CONFIG_S3C64XX_DEV_SPI2 + s3c64xx_device_spi2.name = name; +#endif +} + +#endif /* __PLAT_S3C_SPI_CORE_H */ diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile index 635cb1865e4..32d05c8219d 100644 --- a/arch/arm/tools/Makefile +++ b/arch/arm/tools/Makefile @@ -5,6 +5,6 @@ # include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types - @echo ' Generating $@' + @$(kecho) ' Generating $@' @mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index c834b32af27..3b44e0dd0a9 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -701,11 +701,14 @@ static int __init vfp_init(void) elf_hwcap |= HWCAP_VFPv3; /* - * Check for VFPv3 D16. CPUs in this configuration - * only have 16 x 64bit registers. + * Check for VFPv3 D16 and VFPv4 D16. CPUs in + * this configuration only have 16 x 64bit + * registers. */ if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1) - elf_hwcap |= HWCAP_VFPv3D16; + elf_hwcap |= HWCAP_VFPv3D16; /* also v4-D16 */ + else + elf_hwcap |= HWCAP_VFPD32; } #endif /* diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 59bcb96ac36..f5760927544 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -166,3 +166,14 @@ void free_xenballooned_pages(int nr_pages, struct page **pages) *pages = NULL; } EXPORT_SYMBOL_GPL(free_xenballooned_pages); + +/* In the hypervisor.S file. */ +EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_xen_version); +EXPORT_SYMBOL_GPL(HYPERVISOR_console_io); +EXPORT_SYMBOL_GPL(HYPERVISOR_sched_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_hvm_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op); +EXPORT_SYMBOL_GPL(privcmd_call); diff --git a/arch/arm/xen/grant-table.c b/arch/arm/xen/grant-table.c index dbd1330c019..859a9bb002d 100644 --- a/arch/arm/xen/grant-table.c +++ b/arch/arm/xen/grant-table.c @@ -33,7 +33,7 @@ #include <xen/page.h> #include <xen/grant_table.h> -int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes, +int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes, unsigned long max_nr_gframes, void **__shared) { diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index 074f5ed101b..71f723984cb 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -48,20 +48,16 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/opcodes-virt.h> #include <xen/interface/xen.h> -/* HVC 0xEA1 */ -#ifdef CONFIG_THUMB2_KERNEL -#define xen_hvc .word 0xf7e08ea1 -#else -#define xen_hvc .word 0xe140ea71 -#endif +#define XEN_IMM 0xEA1 #define HYPERCALL_SIMPLE(hypercall) \ ENTRY(HYPERVISOR_##hypercall) \ mov r12, #__HYPERVISOR_##hypercall; \ - xen_hvc; \ + __HVC(XEN_IMM); \ mov pc, lr; \ ENDPROC(HYPERVISOR_##hypercall) @@ -76,7 +72,7 @@ ENTRY(HYPERVISOR_##hypercall) \ stmdb sp!, {r4} \ ldr r4, [sp, #4] \ mov r12, #__HYPERVISOR_##hypercall; \ - xen_hvc \ + __HVC(XEN_IMM); \ ldm sp!, {r4} \ mov pc, lr \ ENDPROC(HYPERVISOR_##hypercall) @@ -100,7 +96,7 @@ ENTRY(privcmd_call) mov r2, r3 ldr r3, [sp, #8] ldr r4, [sp, #4] - xen_hvc + __HVC(XEN_IMM) ldm sp!, {r4} mov pc, lr ENDPROC(privcmd_call); |