diff options
Diffstat (limited to 'arch/arm')
27 files changed, 398 insertions, 701 deletions
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index a8810f83a57..d54969be0a5 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -226,8 +226,6 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap_2430sdp_init(void) { - int ret; - omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC); omap_board_config = sdp2430_config; @@ -246,9 +244,8 @@ static void __init omap_2430sdp_init(void) board_smc91x_init(); /* Turn off secondary LCD backlight */ - ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight"); - if (ret == 0) - gpio_direction_output(SECONDARY_LCD_GPIO, 0); + gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW, + "Secondary LCD backlight"); } static void __init omap_2430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 951e5857ad3..99218a5299c 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -126,8 +126,11 @@ static struct twl4030_keypad_data sdp3430_kp_data = { #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 #define SDP3430_LCD_PANEL_ENABLE_GPIO 5 -static unsigned backlight_gpio; -static unsigned enable_gpio; +static struct gpio sdp3430_dss_gpios[] __initdata = { + {SDP3430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD reset" }, + {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"}, +}; + static int lcd_enabled; static int dvi_enabled; @@ -135,29 +138,11 @@ static void __init sdp3430_display_init(void) { int r; - enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; - backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; - - r = gpio_request(enable_gpio, "LCD reset"); - if (r) { - printk(KERN_ERR "failed to get LCD reset GPIO\n"); - goto err0; - } - - r = gpio_request(backlight_gpio, "LCD Backlight"); - if (r) { - printk(KERN_ERR "failed to get LCD backlight GPIO\n"); - goto err1; - } - - gpio_direction_output(enable_gpio, 0); - gpio_direction_output(backlight_gpio, 0); + r = gpio_request_array(sdp3430_dss_gpios, + ARRAY_SIZE(sdp3430_dss_gpios)); + if (r) + printk(KERN_ERR "failed to get LCD control GPIOs\n"); - return; -err1: - gpio_free(enable_gpio); -err0: - return; } static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) @@ -167,8 +152,8 @@ static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_direction_output(enable_gpio, 1); - gpio_direction_output(backlight_gpio, 1); + gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1); + gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1); lcd_enabled = 1; @@ -179,8 +164,8 @@ static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) { lcd_enabled = 0; - gpio_direction_output(enable_gpio, 0); - gpio_direction_output(backlight_gpio, 0); + gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0); + gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0); } static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -308,12 +293,10 @@ static int sdp3430_twl_gpio_setup(struct device *dev, omap2_hsmmc_init(mmc); /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */ - gpio_request(gpio + 7, "sub_lcd_en_bkl"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl"); /* gpio + 15 is "sub_lcd_nRST" (output) */ - gpio_request(gpio + 15, "sub_lcd_nRST"); - gpio_direction_output(gpio + 15, 0); + gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST"); return 0; } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 707354222d4..ae3153c5396 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -252,58 +252,22 @@ static struct spi_board_info sdp4430_spi_board_info[] __initdata = { }, }; +static struct gpio sdp4430_eth_gpios[] __initdata = { + { ETH_KS8851_POWER_ON, GPIOF_OUT_INIT_HIGH, "eth_power" }, + { ETH_KS8851_QUART, GPIOF_OUT_INIT_HIGH, "quart" }, + { ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" }, +}; + static int omap_ethernet_init(void) { int status; /* Request of GPIO lines */ + status = gpio_request_array(sdp4430_eth_gpios, + ARRAY_SIZE(sdp4430_eth_gpios)); + if (status) + pr_err("Cannot request ETH GPIOs\n"); - status = gpio_request(ETH_KS8851_POWER_ON, "eth_power"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON); - return status; - } - - status = gpio_request(ETH_KS8851_QUART, "quart"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART); - goto error1; - } - - status = gpio_request(ETH_KS8851_IRQ, "eth_irq"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ); - goto error2; - } - - /* Configuration of requested GPIO lines */ - - status = gpio_direction_output(ETH_KS8851_POWER_ON, 1); - if (status) { - pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ); - goto error3; - } - - status = gpio_direction_output(ETH_KS8851_QUART, 1); - if (status) { - pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART); - goto error3; - } - - status = gpio_direction_input(ETH_KS8851_IRQ); - if (status) { - pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ); - goto error3; - } - - return 0; - -error3: - gpio_free(ETH_KS8851_IRQ); -error2: - gpio_free(ETH_KS8851_QUART); -error1: - gpio_free(ETH_KS8851_POWER_ON); return status; } @@ -602,21 +566,13 @@ static int __init omap4_i2c_init(void) static void __init omap_sfh7741prox_init(void) { - int error; + int error; - error = gpio_request(OMAP4_SFH7741_ENABLE_GPIO, "sfh7741"); - if (error < 0) { + error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO, + GPIOF_OUT_INIT_LOW, "sfh7741"); + if (error < 0) pr_err("%s:failed to request GPIO %d, error %d\n", __func__, OMAP4_SFH7741_ENABLE_GPIO, error); - return; - } - - error = gpio_direction_output(OMAP4_SFH7741_ENABLE_GPIO , 0); - if (error < 0) { - pr_err("%s: GPIO configuration failed: GPIO %d,error %d\n", - __func__, OMAP4_SFH7741_ENABLE_GPIO, error); - gpio_free(OMAP4_SFH7741_ENABLE_GPIO); - } } static void sdp4430_hdmi_mux_init(void) @@ -633,27 +589,19 @@ static void sdp4430_hdmi_mux_init(void) OMAP_PIN_INPUT_PULLUP); } +static struct gpio sdp4430_hdmi_gpios[] = { + { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, +}; + static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) { int status; - status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_hpd"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD); - return status; - } - status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_ls_oe"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE); - goto error1; - } - - return 0; - -error1: - gpio_free(HDMI_GPIO_HPD); + status = gpio_request_array(sdp4430_hdmi_gpios, + ARRAY_SIZE(sdp4430_hdmi_gpios)); + if (status) + pr_err("%s: Cannot request HDMI GPIOs\n", __func__); return status; } diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index a890d244fec..5e438a77cd7 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -89,19 +89,13 @@ static void __init am3517_crane_init(void) return; } - ret = gpio_request(GPIO_USB_POWER, "usb_ehci_enable"); + ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH, + "usb_ehci_enable"); if (ret < 0) { pr_err("Can not request GPIO %d\n", GPIO_USB_POWER); return; } - ret = gpio_direction_output(GPIO_USB_POWER, 1); - if (ret < 0) { - gpio_free(GPIO_USB_POWER); - pr_err("Unable to initialize EHCI power\n"); - return; - } - usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index ce7d5e6e415..6c470603880 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -174,19 +174,14 @@ static void __init am3517_evm_rtc_init(void) int r; omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP); - r = gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq"); + + r = gpio_request_one(GPIO_RTCS35390A_IRQ, GPIOF_IN, "rtcs35390a-irq"); if (r < 0) { printk(KERN_WARNING "failed to request GPIO#%d\n", GPIO_RTCS35390A_IRQ); return; } - r = gpio_direction_input(GPIO_RTCS35390A_IRQ); - if (r < 0) { - printk(KERN_WARNING "GPIO#%d cannot be configured as input\n", - GPIO_RTCS35390A_IRQ); - gpio_free(GPIO_RTCS35390A_IRQ); - return; - } + am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ); } @@ -242,6 +237,15 @@ static int dvi_enabled; #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) +static struct gpio am3517_evm_dss_gpios[] __initdata = { + /* GPIO 182 = LCD Backlight Power */ + { LCD_PANEL_BKLIGHT_PWR, GPIOF_OUT_INIT_HIGH, "lcd_backlight_pwr" }, + /* GPIO 181 = LCD Panel PWM */ + { LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, + /* GPIO 176 = LCD Panel Power enable pin */ + { LCD_PANEL_PWR, GPIOF_OUT_INIT_HIGH, "dvi enable" }, +}; + static void __init am3517_evm_display_init(void) { int r; @@ -249,41 +253,15 @@ static void __init am3517_evm_display_init(void) omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP); omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN); omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN); - /* - * Enable GPIO 182 = LCD Backlight Power - */ - r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr"); + + r = gpio_request_array(am3517_evm_dss_gpios, + ARRAY_SIZE(am3517_evm_dss_gpios)); if (r) { - printk(KERN_ERR "failed to get lcd_backlight_pwr\n"); + printk(KERN_ERR "failed to get DSS panel control GPIOs\n"); return; } - gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1); - /* - * Enable GPIO 181 = LCD Panel PWM - */ - r = gpio_request(LCD_PANEL_PWM, "lcd_pwm"); - if (r) { - printk(KERN_ERR "failed to get lcd_pwm\n"); - goto err_1; - } - gpio_direction_output(LCD_PANEL_PWM, 1); - /* - * Enable GPIO 176 = LCD Panel Power enable pin - */ - r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_pwr\n"); - goto err_2; - } - gpio_direction_output(LCD_PANEL_PWR, 1); printk(KERN_INFO "Display initialized successfully\n"); - return; - -err_2: - gpio_free(LCD_PANEL_PWM); -err_1: - gpio_free(LCD_PANEL_BKLIGHT_PWR); } #else static void __init am3517_evm_display_init(void) {} diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index f4f8374a029..f3beb8eeef7 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -202,6 +202,7 @@ static inline void __init apollon_init_smc91x(void) unsigned int rate; struct clk *gpmc_fck; int eth_cs; + int err; gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ if (IS_ERR(gpmc_fck)) { @@ -245,15 +246,13 @@ static inline void __init apollon_init_smc91x(void) apollon_smc91x_resources[0].end = base + 0x30f; udelay(100); - omap_mux_init_gpio(74, 0); - if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) { + omap_mux_init_gpio(APOLLON_ETHR_GPIO_IRQ, 0); + err = gpio_request_one(APOLLON_ETHR_GPIO_IRQ, GPIOF_IN, "SMC91x irq"); + if (err) { printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", APOLLON_ETHR_GPIO_IRQ); gpmc_cs_free(APOLLON_ETH_CS); - goto out; } - gpio_direction_input(APOLLON_ETHR_GPIO_IRQ); - out: clk_disable(gpmc_fck); clk_put(gpmc_fck); @@ -280,20 +279,19 @@ static void __init omap_apollon_init_early(void) omap2_init_common_devices(NULL, NULL); } +static struct gpio apollon_gpio_leds[] __initdata = { + { LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */ + { LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */ + { LED2_GPIO15, GPIOF_OUT_INIT_LOW, "LED2" }, /* LED2 - AA4 */ +}; + static void __init apollon_led_init(void) { - /* LED0 - AA10 */ omap_mux_init_signal("vlynq_clk.gpio_13", 0); - gpio_request(LED0_GPIO13, "LED0"); - gpio_direction_output(LED0_GPIO13, 0); - /* LED1 - AA6 */ omap_mux_init_signal("vlynq_rx1.gpio_14", 0); - gpio_request(LED1_GPIO14, "LED1"); - gpio_direction_output(LED1_GPIO14, 0); - /* LED2 - AA4 */ omap_mux_init_signal("vlynq_rx0.gpio_15", 0); - gpio_request(LED2_GPIO15, "LED2"); - gpio_direction_output(LED2_GPIO15, 0); + + gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds)); } static void __init apollon_usb_init(void) @@ -301,8 +299,7 @@ static void __init apollon_usb_init(void) /* USB device */ /* DEVICE_SUSPEND */ omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); - gpio_request(12, "USB suspend"); - gpio_direction_output(12, 0); + gpio_request_one(12, GPIOF_OUT_INIT_LOW, "USB suspend"); omap2_usbfs_init(&apollon_usb_config); } diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e0e2d483800..6063be82b56 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -182,10 +182,6 @@ static inline void cm_t35_init_nand(void) {} #define CM_T35_LCD_BL_GPIO 58 #define CM_T35_DVI_EN_GPIO 54 -static int lcd_bl_gpio; -static int lcd_en_gpio; -static int dvi_en_gpio; - static int lcd_enabled; static int dvi_enabled; @@ -196,8 +192,8 @@ static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_set_value(lcd_en_gpio, 1); - gpio_set_value(lcd_bl_gpio, 1); + gpio_set_value(CM_T35_LCD_EN_GPIO, 1); + gpio_set_value(CM_T35_LCD_BL_GPIO, 1); lcd_enabled = 1; @@ -208,8 +204,8 @@ static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev) { lcd_enabled = 0; - gpio_set_value(lcd_bl_gpio, 0); - gpio_set_value(lcd_en_gpio, 0); + gpio_set_value(CM_T35_LCD_BL_GPIO, 0); + gpio_set_value(CM_T35_LCD_EN_GPIO, 0); } static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -219,7 +215,7 @@ static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_set_value(dvi_en_gpio, 0); + gpio_set_value(CM_T35_DVI_EN_GPIO, 0); dvi_enabled = 1; return 0; @@ -227,7 +223,7 @@ static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev) { - gpio_set_value(dvi_en_gpio, 1); + gpio_set_value(CM_T35_DVI_EN_GPIO, 1); dvi_enabled = 0; } @@ -309,62 +305,38 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { }, }; +static struct gpio cm_t35_dss_gpios[] __initdata = { + { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" }, + { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" }, + { CM_T35_DVI_EN_GPIO, GPIOF_OUT_INIT_HIGH, "dvi enable" }, +}; + static void __init cm_t35_init_display(void) { int err; - lcd_en_gpio = CM_T35_LCD_EN_GPIO; - lcd_bl_gpio = CM_T35_LCD_BL_GPIO; - dvi_en_gpio = CM_T35_DVI_EN_GPIO; - spi_register_board_info(cm_t35_lcd_spi_board_info, ARRAY_SIZE(cm_t35_lcd_spi_board_info)); - err = gpio_request(lcd_en_gpio, "LCD RST"); - if (err) { - pr_err("CM-T35: failed to get LCD reset GPIO\n"); - goto out; - } - - err = gpio_request(lcd_bl_gpio, "LCD BL"); + err = gpio_request_array(cm_t35_dss_gpios, + ARRAY_SIZE(cm_t35_dss_gpios)); if (err) { - pr_err("CM-T35: failed to get LCD backlight control GPIO\n"); - goto err_lcd_bl; + pr_err("CM-T35: failed to request DSS control GPIOs\n"); + return; } - err = gpio_request(dvi_en_gpio, "DVI EN"); - if (err) { - pr_err("CM-T35: failed to get DVI reset GPIO\n"); - goto err_dvi_en; - } - - gpio_export(lcd_en_gpio, 0); - gpio_export(lcd_bl_gpio, 0); - gpio_export(dvi_en_gpio, 0); - gpio_direction_output(lcd_en_gpio, 0); - gpio_direction_output(lcd_bl_gpio, 0); - gpio_direction_output(dvi_en_gpio, 1); + gpio_export(CM_T35_LCD_EN_GPIO, 0); + gpio_export(CM_T35_LCD_BL_GPIO, 0); + gpio_export(CM_T35_DVI_EN_GPIO, 0); msleep(50); - gpio_set_value(lcd_en_gpio, 1); + gpio_set_value(CM_T35_LCD_EN_GPIO, 1); err = omap_display_init(&cm_t35_dss_data); if (err) { pr_err("CM-T35: failed to register DSS device\n"); - goto err_dev_reg; + gpio_free_array(cm_t35_dss_gpios, ARRAY_SIZE(cm_t35_dss_gpios)); } - - return; - -err_dev_reg: - gpio_free(dvi_en_gpio); -err_dvi_en: - gpio_free(lcd_bl_gpio); -err_lcd_bl: - gpio_free(lcd_en_gpio); -out: - - return; } static struct regulator_consumer_supply cm_t35_vmmc1_supply = { @@ -497,10 +469,8 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, { int wlan_rst = gpio + 2; - if ((gpio_request(wlan_rst, "WLAN RST") == 0) && - (gpio_direction_output(wlan_rst, 1) == 0)) { + if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) { gpio_export(wlan_rst, 0); - udelay(10); gpio_set_value(wlan_rst, 0); udelay(10); diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index a27e3eee829..08f08e81249 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -148,14 +148,13 @@ static void __init cm_t3517_init_rtc(void) { int err; - err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en"); + err = gpio_request_one(RTC_CS_EN_GPIO, GPIOF_OUT_INIT_HIGH, + "rtc cs en"); if (err) { pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err); return; } - gpio_direction_output(RTC_CS_EN_GPIO, 1); - platform_device_register(&cm_t3517_rtc_device); } #else @@ -182,11 +181,11 @@ static int cm_t3517_init_usbh(void) { int err; - err = gpio_request(USB_HUB_RESET_GPIO, "usb hub rst"); + err = gpio_request_one(USB_HUB_RESET_GPIO, GPIOF_OUT_INIT_LOW, + "usb hub rst"); if (err) { pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err); } else { - gpio_direction_output(USB_HUB_RESET_GPIO, 0); udelay(10); gpio_set_value(USB_HUB_RESET_GPIO, 1); msleep(1); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 405542af6ca..3bd344a527e 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -242,7 +242,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN"); + GPIOF_OUT_INIT_LOW, "LCD_PWREN"); if (ret < 0) { devkit8000_lcd_device.reset_gpio = -EINVAL; printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); @@ -251,7 +251,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* gpio + 7 is "DVI_PD" (out, active low) */ devkit8000_dvi_device.reset_gpio = gpio + 7; ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown"); + GPIOF_OUT_INIT_LOW, "DVI PowerDown"); if (ret < 0) { devkit8000_dvi_device.reset_gpio = -EINVAL; printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); @@ -483,14 +483,14 @@ static void __init omap_dm9000_init(void) { unsigned char *eth_addr = omap_dm9000_platdata.dev_addr; struct omap_die_id odi; + int ret; - if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) { + ret = gpio_request_one(OMAP_DM9000_GPIO_IRQ, GPIOF_IN, "dm9000 irq"); + if (ret < 0) { printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n", OMAP_DM9000_GPIO_IRQ); return; - } - - gpio_direction_input(OMAP_DM9000_GPIO_IRQ); + } /* init the mac address using DIE id */ omap_get_die_id(&odi); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 2c9a9197d2b..c62c297e0a3 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -78,22 +78,22 @@ static void __init igep2_get_revision(void) omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT); - if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_HW0_REV") == 0) && - (gpio_direction_input(IGEP2_GPIO_LED1_RED) == 0)) { - ret = gpio_get_value(IGEP2_GPIO_LED1_RED); - if (ret == 0) { - pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n"); - hwrev = IGEP2_BOARD_HWREV_C; - } else if (ret == 1) { - pr_info("IGEP2: Hardware Revision B/C (B compatible)\n"); - hwrev = IGEP2_BOARD_HWREV_B; - } else { - pr_err("IGEP2: Unknown Hardware Revision\n"); - hwrev = -1; - } - } else { + if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) { pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n"); pr_err("IGEP2: Unknown Hardware Revision\n"); + return; + } + + ret = gpio_get_value(IGEP2_GPIO_LED1_RED); + if (ret == 0) { + pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n"); + hwrev = IGEP2_BOARD_HWREV_C; + } else if (ret == 1) { + pr_info("IGEP2: Hardware Revision B/C (B compatible)\n"); + hwrev = IGEP2_BOARD_HWREV_B; + } else { + pr_err("IGEP2: Unknown Hardware Revision\n"); + hwrev = -1; } gpio_free(IGEP2_GPIO_LED1_RED); @@ -339,32 +339,35 @@ static void __init igep2_leds_init(void) } #else +static struct gpio igep2_gpio_leds[] __initdata = { + { IGEP2_GPIO_LED0_RED, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" }, + { IGEP2_GPIO_LED0_GREEN, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" }, + { IGEP2_GPIO_LED1_RED, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" }, +}; + static inline void igep2_leds_init(void) { - if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED0_RED, 0) == 0)) - gpio_export(IGEP2_GPIO_LED0_RED, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n"); - - if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 0) == 0)) - gpio_export(IGEP2_GPIO_LED0_GREEN, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n"); - - if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED1_RED, 0) == 0)) - gpio_export(IGEP2_GPIO_LED1_RED, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n"); + if (gpio_request_array(igep2_gpio_leds, ARRAY_SIZE(igep2_gpio_leds))) { + pr_warning("IGEP v2: Could not obtain leds gpios\n"); + return; + } + gpio_export(IGEP2_GPIO_LED0_RED, 0); + gpio_export(IGEP2_GPIO_LED0_GREEN, 0); + gpio_export(IGEP2_GPIO_LED1_RED, 0); } #endif +static struct gpio igep2_twl_gpios[] = { + { -EINVAL, GPIOF_IN, "GPIO_EHCI_NOC" }, + { -EINVAL, GPIOF_OUT_INIT_LOW, "GPIO_USBH_CPEN" }, +}; + static int igep2_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); @@ -373,22 +376,20 @@ static int igep2_twl_gpio_setup(struct device *dev, * REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ - if ((gpio_request(gpio + 1, "GPIO_EHCI_NOC") < 0) || - (gpio_direction_input(gpio + 1) < 0)) - pr_err("IGEP2: Could not obtain gpio for EHCI NOC"); + igep2_twl_gpios[0].gpio = gpio + 1; - /* - * TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN - * (out, active low) - */ - if ((gpio_request(gpio + TWL4030_GPIO_MAX, "GPIO_USBH_CPEN") < 0) || - (gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0) < 0)) + /* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */ + igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX; + + ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios)); + if (ret < 0) pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) - && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) + ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, + "gpio-led:green:d1"); + if (ret == 0) gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); else pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n"); @@ -469,8 +470,9 @@ static struct regulator_init_data igep2_vpll2 = { static void __init igep2_display_init(void) { - if (gpio_request(IGEP2_GPIO_DVI_PUP, "GPIO_DVI_PUP") && - gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1)) + int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH, + "GPIO_DVI_PUP"); + if (err) pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n"); } @@ -577,44 +579,43 @@ static struct omap_board_mux board_mux[] __initdata = { #endif #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) +static struct gpio igep2_wlan_bt_gpios[] __initdata = { + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" }, + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" }, + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" }, +}; static void __init igep2_wlan_bt_init(void) { - unsigned npd, wreset, btreset; + int err; /* GPIO's for WLAN-BT combo depends on hardware revision */ if (hwrev == IGEP2_BOARD_HWREV_B) { - npd = IGEP2_RB_GPIO_WIFI_NPD; - wreset = IGEP2_RB_GPIO_WIFI_NRESET; - btreset = IGEP2_RB_GPIO_BT_NRESET; + igep2_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD; + igep2_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET; + igep2_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET; } else if (hwrev == IGEP2_BOARD_HWREV_C) { - npd = IGEP2_RC_GPIO_WIFI_NPD; - wreset = IGEP2_RC_GPIO_WIFI_NRESET; - btreset = IGEP2_RC_GPIO_BT_NRESET; + igep2_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD; + igep2_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET; + igep2_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET; } else return; - /* Set GPIO's for WLAN-BT combo module */ - if ((gpio_request(npd, "GPIO_WIFI_NPD") == 0) && - (gpio_direction_output(npd, 1) == 0)) { - gpio_export(npd, 0); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NPD\n"); - - if ((gpio_request(wreset, "GPIO_WIFI_NRESET") == 0) && - (gpio_direction_output(wreset, 1) == 0)) { - gpio_export(wreset, 0); - gpio_set_value(wreset, 0); - udelay(10); - gpio_set_value(wreset, 1); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NRESET\n"); + err = gpio_request_array(igep2_wlan_bt_gpios, + ARRAY_SIZE(igep2_wlan_bt_gpios)); + if (err) { + pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n"); + return; + } + + gpio_export(igep2_wlan_bt_gpios[0].gpio, 0); + gpio_export(igep2_wlan_bt_gpios[1].gpio, 0); + gpio_export(igep2_wlan_bt_gpios[2].gpio, 0); + + gpio_set_value(igep2_wlan_bt_gpios[1].gpio, 0); + udelay(10); + gpio_set_value(igep2_wlan_bt_gpios[1].gpio, 1); - if ((gpio_request(btreset, "GPIO_BT_NRESET") == 0) && - (gpio_direction_output(btreset, 1) == 0)) { - gpio_export(btreset, 0); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_BT_NRESET\n"); } #else static inline void __init igep2_wlan_bt_init(void) { } diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index 512a7eb9c2d..83f6be2a0de 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -269,49 +269,43 @@ static void __init igep3_leds_init(void) } #else +static struct gpio igep3_gpio_leds[] __initdata = { + { IGEP3_GPIO_LED0_RED, GPIOF_OUT_INIT_HIGH, "gpio-led:red:d0" }, + { IGEP3_GPIO_LED0_GREEN, GPIOF_OUT_INIT_HIGH, "gpio-led:green:d0" }, + { IGEP3_GPIO_LED1_RED, GPIOF_OUT_INIT_HIGH, "gpio-led:red:d1" }, +}; + static inline void igep3_leds_init(void) { - if ((gpio_request(IGEP3_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED0_RED, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED0_RED, 0); - gpio_set_value(IGEP3_GPIO_LED0_RED, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_RED\n"); - - if ((gpio_request(IGEP3_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED0_GREEN, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED0_GREEN, 0); - gpio_set_value(IGEP3_GPIO_LED0_GREEN, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_GREEN\n"); - - if ((gpio_request(IGEP3_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED1_RED, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED1_RED, 0); - gpio_set_value(IGEP3_GPIO_LED1_RED, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_RED\n"); + if (gpio_request_array(igep3_gpio_leds, ARRAY_SIZE(igep3_gpio_leds))) { + pr_warning("IGEP3: Could not obtain leds gpios\n"); + return; + } + gpio_export(IGEP3_GPIO_LED0_RED, 0); + gpio_export(IGEP3_GPIO_LED0_GREEN, 0); + gpio_export(IGEP3_GPIO_LED1_RED, 0); } #endif static int igep3_twl4030_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); +#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) + int ret; /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ -#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) - && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) { - gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); - gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0); - } else + ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, + "gpio-led:green:d1"); + if (ret) pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_GREEN\n"); + else + gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); #else igep3_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; #endif + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + mmc[0].gpio_cd = gpio + 0; + omap2_hsmmc_init(mmc); return 0; }; @@ -358,35 +352,36 @@ static int __init igep3_i2c_init(void) } #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) +static struct gpio igep3_wlan_bt_gpios[] __initdata = { + { IGEP3_GPIO_WIFI_NPD, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" }, + { IGEP3_GPIO_WIFI_NRESET, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" }, + { IGEP3_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" }, +}; static void __init igep3_wifi_bt_init(void) { + int err; + /* Configure MUX values for W-LAN + Bluetooth GPIO's */ omap_mux_init_gpio(IGEP3_GPIO_WIFI_NPD, OMAP_PIN_OUTPUT); omap_mux_init_gpio(IGEP3_GPIO_WIFI_NRESET, OMAP_PIN_OUTPUT); omap_mux_init_gpio(IGEP3_GPIO_BT_NRESET, OMAP_PIN_OUTPUT); /* Set GPIO's for W-LAN + Bluetooth combo module */ - if ((gpio_request(IGEP3_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) && - (gpio_direction_output(IGEP3_GPIO_WIFI_NPD, 1) == 0)) { - gpio_export(IGEP3_GPIO_WIFI_NPD, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NPD\n"); - - if ((gpio_request(IGEP3_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) && - (gpio_direction_output(IGEP3_GPIO_WIFI_NRESET, 1) == 0)) { - gpio_export(IGEP3_GPIO_WIFI_NRESET, 0); - gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0); - udelay(10); - gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NRESET\n"); - - if ((gpio_request(IGEP3_GPIO_BT_NRESET, "GPIO_BT_NRESET") == 0) && - (gpio_direction_output(IGEP3_GPIO_BT_NRESET, 1) == 0)) { - gpio_export(IGEP3_GPIO_BT_NRESET, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_BT_NRESET\n"); + err = gpio_request_array(igep3_wlan_bt_gpios, + ARRAY_SIZE(igep3_wlan_bt_gpios)); + if (err) { + pr_warning("IGEP3: Could not obtain WIFI/BT gpios\n"); + return; + } + + gpio_export(IGEP3_GPIO_WIFI_NPD, 0); + gpio_export(IGEP3_GPIO_WIFI_NRESET, 0); + gpio_export(IGEP3_GPIO_BT_NRESET, 0); + + gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0); + udelay(10); + gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1); } #else void __init igep3_wifi_bt_init(void) {} diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index e710cd9e079..8d74318ed49 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -106,14 +106,13 @@ static void __init n8x0_usb_init(void) static char announce[] __initdata = KERN_INFO "TUSB 6010\n"; /* PM companion chip power control pin */ - ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable"); + ret = gpio_request_one(TUSB6010_GPIO_ENABLE, GPIOF_OUT_INIT_LOW, + "TUSB6010 enable"); if (ret != 0) { printk(KERN_ERR "Could not get TUSB power GPIO%i\n", TUSB6010_GPIO_ENABLE); return; } - gpio_direction_output(TUSB6010_GPIO_ENABLE, 0); - tusb_set_power(0); ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2, @@ -494,8 +493,12 @@ static struct omap_mmc_platform_data mmc1_data = { static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC]; -static void __init n8x0_mmc_init(void) +static struct gpio n810_emmc_gpios[] __initdata = { + { N810_EMMC_VSD_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vddf" }, + { N810_EMMC_VIO_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vdd" }, +}; +static void __init n8x0_mmc_init(void) { int err; @@ -512,27 +515,18 @@ static void __init n8x0_mmc_init(void) mmc1_data.slots[1].ban_openended = 1; } - err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch"); + err = gpio_request_one(N8X0_SLOT_SWITCH_GPIO, GPIOF_OUT_INIT_LOW, + "MMC slot switch"); if (err) return; - gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0); - if (machine_is_nokia_n810()) { - err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf"); - if (err) { - gpio_free(N8X0_SLOT_SWITCH_GPIO); - return; - } - gpio_direction_output(N810_EMMC_VSD_GPIO, 0); - - err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd"); + err = gpio_request_array(n810_emmc_gpios, + ARRAY_SIZE(n810_emmc_gpios)); if (err) { gpio_free(N8X0_SLOT_SWITCH_GPIO); - gpio_free(N810_EMMC_VSD_GPIO); return; } - gpio_direction_output(N810_EMMC_VIO_GPIO, 0); } mmc_data[0] = &mmc1_data; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index bc30ab092d1..3ff3a2c4b86 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -80,6 +80,12 @@ static u8 omap3_beagle_get_rev(void) return omap3_beagle_version; } +static struct gpio omap3_beagle_rev_gpios[] __initdata = { + { 171, GPIOF_IN, "rev_id_0" }, + { 172, GPIOF_IN, "rev_id_1" }, + { 173, GPIOF_IN, "rev_id_2" }, +}; + static void __init omap3_beagle_init_rev(void) { int ret; @@ -89,21 +95,13 @@ static void __init omap3_beagle_init_rev(void) omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP); omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP); - ret = gpio_request(171, "rev_id_0"); - if (ret < 0) - goto fail0; - - ret = gpio_request(172, "rev_id_1"); - if (ret < 0) - goto fail1; - - ret = gpio_request(173, "rev_id_2"); - if (ret < 0) - goto fail2; - - gpio_direction_input(171); - gpio_direction_input(172); - gpio_direction_input(173); + ret = gpio_request_array(omap3_beagle_rev_gpios, + ARRAY_SIZE(omap3_beagle_rev_gpios)); + if (ret < 0) { + printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; + return; + } beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1) | (gpio_get_value(173) << 2); @@ -129,18 +127,6 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; } - - return; - -fail2: - gpio_free(172); -fail1: - gpio_free(171); -fail0: - printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; - - return; } static struct mtd_partition omap3beagle_nand_partitions[] = { @@ -235,13 +221,10 @@ static void __init beagle_display_init(void) { int r; - r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset"); - if (r < 0) { + r = gpio_request_one(beagle_dvi_device.reset_gpio, GPIOF_OUT_INIT_LOW, + "DVI reset"); + if (r < 0) printk(KERN_ERR "Unable to get DVI reset GPIO\n"); - return; - } - - gpio_direction_output(beagle_dvi_device.reset_gpio, 0); } #include "sdram-micron-mt46h32m32lf-6.h" @@ -268,7 +251,7 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r; + int r, usb_pwr_level; if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { mmc[0].gpio_wp = -EINVAL; @@ -287,66 +270,46 @@ static int beagle_twl_gpio_setup(struct device *dev, beagle_vmmc1_supply.dev = mmc[0].dev; beagle_vsim_supply.dev = mmc[0].dev; - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) { - r = gpio_request(gpio + 1, "EHCI_nOC"); - if (!r) { - r = gpio_direction_input(gpio + 1); - if (r) - gpio_free(gpio + 1); - } - if (r) - pr_err("%s: unable to configure EHCI_nOC\n", __func__); - } - /* * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active * high / others active low) - */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); - else - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); - - /* DVI reset GPIO is different between beagle revisions */ - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) - beagle_dvi_device.reset_gpio = 129; - else - beagle_dvi_device.reset_gpio = 170; - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - - /* - * gpio + 1 on Xm controls the TFP410's enable line (active low) - * gpio + 2 control varies depending on the board rev as follows: - * P7/P8 revisions(prototype): Camera EN - * A2+ revisions (production): LDO (supplies DVI, serial, led blocks) + * DVI reset GPIO is different between beagle revisions */ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { - r = gpio_request(gpio + 1, "nDVI_PWR_EN"); - if (!r) { - r = gpio_direction_output(gpio + 1, 0); - if (r) - gpio_free(gpio + 1); - } + usb_pwr_level = GPIOF_OUT_INIT_HIGH; + beagle_dvi_device.reset_gpio = 129; + /* + * gpio + 1 on Xm controls the TFP410's enable line (active low) + * gpio + 2 control varies depending on the board rev as below: + * P7/P8 revisions(prototype): Camera EN + * A2+ revisions (production): LDO (DVI, serial, led blocks) + */ + r = gpio_request_one(gpio + 1, GPIOF_OUT_INIT_LOW, + "nDVI_PWR_EN"); if (r) pr_err("%s: unable to configure nDVI_PWR_EN\n", __func__); - r = gpio_request(gpio + 2, "DVI_LDO_EN"); - if (!r) { - r = gpio_direction_output(gpio + 2, 1); - if (r) - gpio_free(gpio + 2); - } + r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, + "DVI_LDO_EN"); if (r) pr_err("%s: unable to configure DVI_LDO_EN\n", __func__); + } else { + usb_pwr_level = GPIOF_OUT_INIT_LOW; + beagle_dvi_device.reset_gpio = 170; + /* + * REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) + pr_err("%s: unable to configure EHCI_nOC\n", __func__); } + gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR"); + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + return 0; } @@ -608,9 +571,8 @@ static void __init omap3_beagle_init(void) omap_serial_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); - gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(170, true); + gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5066b0bbf63..02e1ad29e1e 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -149,6 +149,15 @@ static inline void __init omap3evm_init_smsc911x(void) { return; } #define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210 #define OMAP3EVM_DVI_PANEL_EN_GPIO 199 +static struct gpio omap3_evm_dss_gpios[] __initdata = { + { OMAP3EVM_LCD_PANEL_RESB, GPIOF_OUT_INIT_HIGH, "lcd_panel_resb" }, + { OMAP3EVM_LCD_PANEL_INI, GPIOF_OUT_INIT_HIGH, "lcd_panel_ini" }, + { OMAP3EVM_LCD_PANEL_QVGA, GPIOF_OUT_INIT_LOW, "lcd_panel_qvga" }, + { OMAP3EVM_LCD_PANEL_LR, GPIOF_OUT_INIT_HIGH, "lcd_panel_lr" }, + { OMAP3EVM_LCD_PANEL_UD, GPIOF_OUT_INIT_HIGH, "lcd_panel_ud" }, + { OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, "lcd_panel_envdd" }, +}; + static int lcd_enabled; static int dvi_enabled; @@ -156,61 +165,10 @@ static void __init omap3_evm_display_init(void) { int r; - r = gpio_request(OMAP3EVM_LCD_PANEL_RESB, "lcd_panel_resb"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_resb\n"); - return; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_RESB, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_INI, "lcd_panel_ini"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_ini\n"); - goto err_1; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_INI, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_QVGA, "lcd_panel_qvga"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_qvga\n"); - goto err_2; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_QVGA, 0); - - r = gpio_request(OMAP3EVM_LCD_PANEL_LR, "lcd_panel_lr"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_lr\n"); - goto err_3; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_LR, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_UD, "lcd_panel_ud"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_ud\n"); - goto err_4; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_UD, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_ENVDD, "lcd_panel_envdd"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_envdd\n"); - goto err_5; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_ENVDD, 0); - - return; - -err_5: - gpio_free(OMAP3EVM_LCD_PANEL_UD); -err_4: - gpio_free(OMAP3EVM_LCD_PANEL_LR); -err_3: - gpio_free(OMAP3EVM_LCD_PANEL_QVGA); -err_2: - gpio_free(OMAP3EVM_LCD_PANEL_INI); -err_1: - gpio_free(OMAP3EVM_LCD_PANEL_RESB); - + r = gpio_request_array(omap3_evm_dss_gpios, + ARRAY_SIZE(omap3_evm_dss_gpios)); + if (r) + printk(KERN_ERR "failed to get lcd_panel_* gpios\n"); } static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev) @@ -400,7 +358,7 @@ static struct platform_device leds_gpio = { static int omap3evm_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r; + int r, lcd_bl_en; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ omap_mux_init_gpio(63, OMAP_PIN_INPUT); @@ -417,16 +375,14 @@ static int omap3evm_twl_gpio_setup(struct device *dev, */ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - r = gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); - if (!r) - r = gpio_direction_output(gpio + TWL4030_GPIO_MAX, - (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) ? 1 : 0); + lcd_bl_en = get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2 ? + GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; + r = gpio_request_one(gpio + TWL4030_GPIO_MAX, lcd_bl_en, "EN_LCD_BKL"); if (r) printk(KERN_ERR "failed to get/set lcd_bkl gpio\n"); /* gpio + 7 == DVI Enable */ - gpio_request(gpio + 7, "EN_DVI"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -717,6 +673,11 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; +static struct gpio omap3_evm_ehci_gpios[] __initdata = { + { OMAP3_EVM_EHCI_VBUS, GPIOF_OUT_INIT_HIGH, "enable EHCI VBUS" }, + { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" }, +}; + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); @@ -740,16 +701,12 @@ static void __init omap3_evm_init(void) if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { /* enable EHCI VBUS using GPIO22 */ - omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP); - gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS"); - gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0); - gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1); - + omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP); /* Select EHCI port on main board */ - omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP); - gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port"); - gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0); - gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0); + omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT, + OMAP_PIN_INPUT_PULLUP); + gpio_request_array(omap3_evm_ehci_gpios, + ARRAY_SIZE(omap3_evm_ehci_gpios)); /* setup EHCI phy reset config */ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 6c22d3f238e..78dd2a7fe6e 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -305,24 +305,13 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, /* gpio + 13 drives 32kHz buffer for wifi module */ gpio_32khz = gpio + 13; - ret = gpio_request(gpio_32khz, "wifi 32kHz"); + ret = gpio_request_one(gpio_32khz, GPIOF_OUT_INIT_HIGH, "wifi 32kHz"); if (ret < 0) { pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret); - goto fail; - } - - ret = gpio_direction_output(gpio_32khz, 1); - if (ret < 0) { - pr_err("Cannot set GPIO line %d, ret=%d\n", gpio_32khz, ret); - goto fail_direction; + return -ENODEV; } return 0; - -fail_direction: - gpio_free(gpio_32khz); -fail: - return -ENODEV; } static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { @@ -584,14 +573,10 @@ static void __init pandora_wl1251_init(void) memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata)); - ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq"); + ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq"); if (ret < 0) goto fail; - ret = gpio_direction_input(PANDORA_WIFI_IRQ_GPIO); - if (ret < 0) - goto fail_irq; - pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO); if (pandora_wl1251_pdata.irq < 0) goto fail_irq; diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 9981d06b726..085c60a7c47 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -331,12 +331,11 @@ omap3stalker_twl_gpio_setup(struct device *dev, */ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, + "EN_LCD_BKL"); /* gpio + 7 == DVI Enable */ - gpio_request(gpio + 7, "EN_DVI"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 392278d9a88..82872d7d313 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -146,13 +146,11 @@ static int touchbook_twl_gpio_setup(struct device *dev, /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ - - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); + gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"); /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, + "nEN_USB_PWR"); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -401,15 +399,10 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { static void omap3_touchbook_poweroff(void) { - int r; + int pwr_off = TB_KILL_POWER_GPIO; - r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset"); - if (r < 0) { + if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0) printk(KERN_ERR "Unable to get kill power GPIO\n"); - return; - } - - gpio_direction_output(TB_KILL_POWER_GPIO, 0); } static int __init early_touchbook_revision(char *p) @@ -435,9 +428,8 @@ static void __init omap3_touchbook_init(void) omap_serial_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); - gpio_request(176, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(176, true); + gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); /* Touchscreen and accelerometer */ omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 7eaad629c4c..5d7c0a313dc 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -112,6 +112,11 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +static struct gpio panda_ehci_gpios[] __initdata = { + { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" }, + { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" }, +}; + static void __init omap4_ehci_init(void) { int ret; @@ -121,44 +126,27 @@ static void __init omap4_ehci_init(void) phy_ref_clk = clk_get(NULL, "auxclk3_ck"); if (IS_ERR(phy_ref_clk)) { pr_err("Cannot request auxclk3\n"); - goto error1; + return; } clk_set_rate(phy_ref_clk, 19200000); clk_enable(phy_ref_clk); - /* disable the power to the usb hub prior to init */ - ret = gpio_request(GPIO_HUB_POWER, "hub_power"); + /* disable the power to the usb hub prior to init and reset phy+hub */ + ret = gpio_request_array(panda_ehci_gpios, + ARRAY_SIZE(panda_ehci_gpios)); if (ret) { - pr_err("Cannot request GPIO %d\n", GPIO_HUB_POWER); - goto error1; + pr_err("Unable to initialize EHCI power/reset\n"); + return; } - gpio_export(GPIO_HUB_POWER, 0); - gpio_direction_output(GPIO_HUB_POWER, 0); - gpio_set_value(GPIO_HUB_POWER, 0); - /* reset phy+hub */ - ret = gpio_request(GPIO_HUB_NRESET, "hub_nreset"); - if (ret) { - pr_err("Cannot request GPIO %d\n", GPIO_HUB_NRESET); - goto error2; - } + gpio_export(GPIO_HUB_POWER, 0); gpio_export(GPIO_HUB_NRESET, 0); - gpio_direction_output(GPIO_HUB_NRESET, 0); - gpio_set_value(GPIO_HUB_NRESET, 0); gpio_set_value(GPIO_HUB_NRESET, 1); usbhs_init(&usbhs_bdata); /* enable power to hub */ gpio_set_value(GPIO_HUB_POWER, 1); - return; - -error2: - gpio_free(GPIO_HUB_POWER); -error1: - pr_err("Unable to initialize EHCI power/reset\n"); - return; - } static struct omap_musb_board_data musb_board_data = { @@ -638,27 +626,19 @@ static void omap4_panda_hdmi_mux_init(void) OMAP_PIN_INPUT_PULLUP); } +static struct gpio panda_hdmi_gpios[] = { + { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, +}; + static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) { int status; - status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_hpd"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD); - return status; - } - status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_ls_oe"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE); - goto error1; - } - - return 0; - -error1: - gpio_free(HDMI_GPIO_HPD); + status = gpio_request_array(panda_hdmi_gpios, + ARRAY_SIZE(panda_hdmi_gpios)); + if (status) + pr_err("Cannot request HDMI GPIOs\n"); return status; } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index e152c13ded7..c03f92b14f9 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -151,21 +151,20 @@ static int dvi_enabled; #define OVERO_GPIO_LCD_EN 144 #define OVERO_GPIO_LCD_BL 145 +static struct gpio overo_dss_gpios[] __initdata = { + { OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" }, + { OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" }, +}; + static void __init overo_display_init(void) { - if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) && - (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0)) - gpio_export(OVERO_GPIO_LCD_EN, 0); - else - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_LCD_EN\n"); + if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) { + printk(KERN_ERR "could not obtain DSS control GPIOs\n"); + return; + } - if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) && - (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0)) - gpio_export(OVERO_GPIO_LCD_BL, 0); - else - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_LCD_BL\n"); + gpio_export(OVERO_GPIO_LCD_EN, 0); + gpio_export(OVERO_GPIO_LCD_BL, 0); } static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -553,8 +552,15 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct gpio overo_bt_gpios[] __initdata = { + { OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" }, + { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, +}; + static void __init overo_init(void) { + int ret; + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); omap_display_init(&overo_dss_data); @@ -574,9 +580,9 @@ static void __init overo_init(void) omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - if ((gpio_request(OVERO_GPIO_W2W_NRESET, - "OVERO_GPIO_W2W_NRESET") == 0) && - (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) { + ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH, + "OVERO_GPIO_W2W_NRESET"); + if (ret == 0) { gpio_export(OVERO_GPIO_W2W_NRESET, 0); gpio_set_value(OVERO_GPIO_W2W_NRESET, 0); udelay(10); @@ -586,25 +592,20 @@ static void __init overo_init(void) "OVERO_GPIO_W2W_NRESET\n"); } - if ((gpio_request(OVERO_GPIO_BT_XGATE, "OVERO_GPIO_BT_XGATE") == 0) && - (gpio_direction_output(OVERO_GPIO_BT_XGATE, 0) == 0)) + ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios)); + if (ret) { + pr_err("%s: could not obtain BT gpios\n", __func__); + } else { gpio_export(OVERO_GPIO_BT_XGATE, 0); - else - printk(KERN_ERR "could not obtain gpio for OVERO_GPIO_BT_XGATE\n"); - - if ((gpio_request(OVERO_GPIO_BT_NRESET, "OVERO_GPIO_BT_NRESET") == 0) && - (gpio_direction_output(OVERO_GPIO_BT_NRESET, 1) == 0)) { gpio_export(OVERO_GPIO_BT_NRESET, 0); gpio_set_value(OVERO_GPIO_BT_NRESET, 0); mdelay(6); gpio_set_value(OVERO_GPIO_BT_NRESET, 1); - } else { - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_BT_NRESET\n"); } - if ((gpio_request(OVERO_GPIO_USBH_CPEN, "OVERO_GPIO_USBH_CPEN") == 0) && - (gpio_direction_output(OVERO_GPIO_USBH_CPEN, 1) == 0)) + ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH, + "OVERO_GPIO_USBH_CPEN"); + if (ret == 0) gpio_export(OVERO_GPIO_USBH_CPEN, 0); else printk(KERN_ERR "could not obtain gpio for " diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index a5bf5e92eae..2e509f9149e 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -558,10 +558,8 @@ static __init void rx51_init_si4713(void) static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) { /* FIXME this gpio setup is just a placeholder for now */ - gpio_request(gpio + 6, "backlight_pwm"); - gpio_direction_output(gpio + 6, 0); - gpio_request(gpio + 7, "speaker_en"); - gpio_direction_output(gpio + 7, 1); + gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_HIGH, "speaker_en"); return 0; } @@ -912,26 +910,20 @@ static void rx51_wl1251_set_power(bool enable) gpio_set_value(RX51_WL1251_POWER_GPIO, enable); } +static struct gpio rx51_wl1251_gpios[] __initdata = { + { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" }, + { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, +}; + static void __init rx51_init_wl1251(void) { int irq, ret; - ret = gpio_request(RX51_WL1251_POWER_GPIO, "wl1251 power"); + ret = gpio_request_array(rx51_wl1251_gpios, + ARRAY_SIZE(rx51_wl1251_gpios)); if (ret < 0) goto error; - ret = gpio_direction_output(RX51_WL1251_POWER_GPIO, 0); - if (ret < 0) - goto err_power; - - ret = gpio_request(RX51_WL1251_IRQ_GPIO, "wl1251 irq"); - if (ret < 0) - goto err_power; - - ret = gpio_direction_input(RX51_WL1251_IRQ_GPIO); - if (ret < 0) - goto err_irq; - irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO); if (irq < 0) goto err_irq; @@ -943,10 +935,7 @@ static void __init rx51_init_wl1251(void) err_irq: gpio_free(RX51_WL1251_IRQ_GPIO); - -err_power: gpio_free(RX51_WL1251_POWER_GPIO); - error: printk(KERN_ERR "wl1251 board initialisation failed\n"); wl1251_pdata.set_power = NULL; diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index 89a66db8b77..19777333aef 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -76,13 +76,12 @@ static int __init rx51_video_init(void) return 0; } - if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) { + if (gpio_request_one(RX51_LCD_RESET_GPIO, GPIOF_OUT_INIT_HIGH, + "LCD ACX565AKM reset")) { pr_err("%s failed to get LCD Reset GPIO\n", __func__); return 0; } - gpio_direction_output(RX51_LCD_RESET_GPIO, 1); - omap_display_init(&rx51_dss_board_info); return 0; } diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 2ee9ab92e0c..6402e781c45 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -77,12 +77,9 @@ static inline void __init zoom_init_quaduart(void) quart_gpio = ZOOM_QUADUART_GPIO; - if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) { + if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0) printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n", quart_gpio); - return; - } - gpio_direction_input(quart_gpio); } static inline int omap_zoom_debugboard_detect(void) @@ -92,12 +89,12 @@ static inline int omap_zoom_debugboard_detect(void) debug_board_detect = ZOOM_SMSC911X_GPIO; - if (gpio_request(debug_board_detect, "Zoom debug board detect") < 0) { + if (gpio_request_one(debug_board_detect, GPIOF_IN, + "Zoom debug board detect") < 0) { printk(KERN_ERR "Failed to request GPIO%d for Zoom debug" "board detect\n", debug_board_detect); return 0; } - gpio_direction_input(debug_board_detect); if (!gpio_get_value(debug_board_detect)) { ret = 0; diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 37b84c2b850..ce53e82ba13 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -21,34 +21,19 @@ #define LCD_PANEL_RESET_GPIO_PILOT 55 #define LCD_PANEL_QVGA_GPIO 56 +static struct gpio zoom_lcd_gpios[] __initdata = { + { -EINVAL, GPIOF_OUT_INIT_HIGH, "lcd reset" }, + { LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" }, +}; + static void zoom_lcd_panel_init(void) { - int ret; - unsigned char lcd_panel_reset_gpio; - - lcd_panel_reset_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? + zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? LCD_PANEL_RESET_GPIO_PROD : LCD_PANEL_RESET_GPIO_PILOT; - ret = gpio_request(lcd_panel_reset_gpio, "lcd reset"); - if (ret) { - pr_err("Failed to get LCD reset GPIO (gpio%d).\n", - lcd_panel_reset_gpio); - return; - } - gpio_direction_output(lcd_panel_reset_gpio, 1); - - ret = gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga"); - if (ret) { - pr_err("Failed to get LCD_PANEL_QVGA_GPIO (gpio%d).\n", - LCD_PANEL_QVGA_GPIO); - goto err0; - } - gpio_direction_output(LCD_PANEL_QVGA_GPIO, 1); - - return; -err0: - gpio_free(lcd_panel_reset_gpio); + if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios))) + pr_err("%s: Failed to get LCD GPIOs.\n", __func__); } static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 489294a715c..118c6f53c5e 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -277,13 +277,11 @@ static int zoom_twl_gpio_setup(struct device *dev, zoom_vsim_supply.dev = mmc[0].dev; zoom_vmmc2_supply.dev = mmc[1].dev; - ret = gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd enable"); - if (ret) { + ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, + "lcd enable"); + if (ret) pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n", LCD_PANEL_ENABLE_GPIO); - return ret; - } - gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); return ret; } diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 877c6f5807b..ba10c24f3d8 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -147,25 +147,24 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) goto free1; } - if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0) + if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0) goto free1; - gpio_direction_input(gpmc_cfg->gpio_irq); gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); if (gpmc_cfg->gpio_pwrdwn) { - ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown"); + ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn, + GPIOF_OUT_INIT_LOW, "SMC91X powerdown"); if (ret) goto free2; - gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0); } if (gpmc_cfg->gpio_reset) { - ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset"); + ret = gpio_request_one(gpmc_cfg->gpio_reset, + GPIOF_OUT_INIT_LOW, "SMC91X reset"); if (ret) goto free3; - gpio_direction_output(gpmc_cfg->gpio_reset, 0); gpio_set_value(gpmc_cfg->gpio_reset, 1); msleep(100); gpio_set_value(gpmc_cfg->gpio_reset, 0); diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index e09374a48dd..997033129d2 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -63,23 +63,22 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0; gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff; - if (gpio_request(gpmc_cfg->gpio_irq, "smsc911x irq") < 0) { + if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) { pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq); goto free1; } - gpio_direction_input(gpmc_cfg->gpio_irq); gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); if (gpio_is_valid(gpmc_cfg->gpio_reset)) { - ret = gpio_request(gpmc_cfg->gpio_reset, "smsc911x reset"); + ret = gpio_request_one(gpmc_cfg->gpio_reset, + GPIOF_OUT_INIT_HIGH, "smsc911x reset"); if (ret) { pr_err("Failed to request reset GPIO%d\n", gpmc_cfg->gpio_reset); goto free2; } - gpio_direction_output(gpmc_cfg->gpio_reset, 1); gpio_set_value(gpmc_cfg->gpio_reset, 0); msleep(100); gpio_set_value(gpmc_cfg->gpio_reset, 1); diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 8a3c05f3c1d..8dd26b765b7 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -293,12 +293,11 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, ); /* IRQ */ - status = gpio_request(irq, "TUSB6010 irq"); + status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq"); if (status < 0) { printk(error, 3, status); return status; } - gpio_direction_input(irq); tusb_resources[2].start = irq + IH_GPIO_BASE; /* set up memory timings ... can speed them up later */ |