diff options
Diffstat (limited to 'arch/arm')
228 files changed, 1501 insertions, 2238 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6d6e18fee9f..2f88d8d9770 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,7 +6,7 @@ config ARM select HAVE_DMA_API_DEBUG select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_DMA_ATTRS - select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7) + select HAVE_DMA_CONTIGUOUS if MMU select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION @@ -2144,6 +2144,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX tristate "CPUfreq driver for i.MX CPUs" depends on ARCH_MXC && CPU_FREQ + select CPU_FREQ_TABLE help This enables the CPUfreq driver for i.MX CPUs. diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 7829a4d0cb2..96514c134e5 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -15,7 +15,7 @@ compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { - bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; }; ahb { diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cd86177a3ea..59d9789e550 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,8 +25,8 @@ aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 52d94704510..f8ca6fa8819 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -41,9 +41,13 @@ }; power-blue { label = "power:blue"; - gpios = <&gpio1 11 0>; + gpios = <&gpio1 10 0>; linux,default-trigger = "timer"; }; + power-red { + label = "power:red"; + gpios = <&gpio1 11 0>; + }; usb1 { label = "usb1:blue"; gpios = <&gpio1 12 0>; diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 7d8718468e0..90610c7030f 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -33,7 +33,7 @@ CONFIG_AEABI=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" +CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw" CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y CONFIG_VFP=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d4f661d1cf..da6845493ca 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 2ae842df455..5c44dcb0987 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -203,6 +203,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size, } /* + * This can be called during early boot to increase the size of the atomic + * coherent DMA pool above the default value of 256KiB. It must be called + * before postcore_initcall. + */ +extern void __init init_dma_coherent_pool_size(unsigned long size); + +/* * This can be called during boot to increase the size of the consistent * DMA region above it's default value of 2MB. It must be called before the * memory allocator is initialised, i.e. before any core_initcall. diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 104ca40d8d1..aaa443b48c9 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void) at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ - setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); + setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 7b9c2ba396e..bce572a530e 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -726,6 +726,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, }, }; @@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9260_rtt_device.num_resources = 2; + at91sam9260_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9260_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 8df5c1bdff9..bc2590d712d 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -609,6 +609,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9261_rtt_device.num_resources = 2; + at91sam9261_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9261_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index eb6bbf86fb9..9b6ca734f1a 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed only for the chosen RTT: * GPBR will serve as the storage for RTC time offset */ - at91sam9263_rtt0_device.num_resources = 2; + at91sam9263_rtt0_device.num_resources = 3; at91sam9263_rtt1_device.num_resources = 1; pdev = &at91sam9263_rtt0_device; r = rtt0_resources; break; case 1: at91sam9263_rtt0_device.num_resources = 1; - at91sam9263_rtt1_device.num_resources = 2; + at91sam9263_rtt1_device.num_resources = 3; pdev = &at91sam9263_rtt1_device; r = rtt1_resources; break; @@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void) pdev->name = "rtc-at91sam9"; r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; r[1].end = r[1].start + 3; + r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 06073996a38..1b47319ca00 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9g45_rtt_device.num_resources = 2; + at91sam9g45_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9G45_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index f09fff93217..b3d365dadef 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -688,6 +688,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9rl_rtt_device.num_resources = 2; + at91sam9rl_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9RL_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index de2ec6b8fea..188c82971eb 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); #define cpu_has_300M_plla() (cpu_is_at91sam9g10()) +#define cpu_has_240M_plla() (cpu_is_at91sam9261() \ + || cpu_is_at91sam9263() \ + || cpu_is_at91sam9rl()) + +#define cpu_has_210M_plla() (cpu_is_at91sam9260()) + #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ @@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock) } else if (cpu_has_800M_plla()) { if (plla.rate_hz > 800000000) pll_overclock = true; + } else if (cpu_has_240M_plla()) { + if (plla.rate_hz > 240000000) + pll_overclock = true; + } else if (cpu_has_210M_plla()) { + if (plla.rate_hz > 210000000) + pll_overclock = true; } else { if (plla.rate_hz > 209000000) pll_overclock = true; diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 4db5de54b6a..6321567d8ea 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -102,7 +102,8 @@ void __init dove_ehci1_init(void) void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, - IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR); + IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR, + 1600); } /***************************************************************************** diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5ca80307d6d..4e574c24581 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -42,6 +42,7 @@ #include <plat/backlight.h> #include <plat/fb.h> #include <plat/mfc.h> +#include <plat/hdmi.h> #include <mach/ohci.h> #include <mach/map.h> @@ -734,6 +735,11 @@ static void __init origen_bt_setup(void) s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); } +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -781,6 +787,7 @@ static void __init origen_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); #ifdef CONFIG_DRM_EXYNOS s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 3cfa688d274..73f2bce097e 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -40,6 +40,7 @@ #include <plat/mfc.h> #include <plat/ehci.h> #include <plat/clock.h> +#include <plat/hdmi.h> #include <mach/map.h> #include <mach/ohci.h> @@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ @@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); samsung_keypad_set_platdata(&smdkv310_keypad_data); diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index ca70e5fcc7a..020852d3bdd 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -17,6 +17,7 @@ #include <linux/sched.h> #include <asm/irq.h> #include <asm/mach/irq.h> +#include <asm/system_misc.h> #include <mach/hardware.h> #define IRQ_SOURCE(base_addr) (base_addr + 0x00) diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 07f7c226e4c..d004d37ad9d 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o +imx5-pm-$(CONFIG_PM) += pm-imx5.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o @@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -obj-$(CONFIG_CPU_V7) += head-v7.o -AFLAGS_head-v7.o :=-Wa,-march=armv7-a -obj-$(CONFIG_SMP) += platsmp.o +AFLAGS_headsmp.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o +obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o endif # i.MX5 based machines diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ea89520b6e2..4233d9e3531 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -152,7 +152,7 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, clk_max }; @@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void) clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); - clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1); - clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1); + clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); + clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S index 7e49deb128a..7e49deb128a 100644 --- a/arch/arm/mach-imx/head-v7.S +++ b/arch/arm/mach-imx/headsmp.S diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 20ed2d56c1a..f8f7437c83b 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void) : "cc"); } -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * @@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); imx_enable_cpu(cpu, false); - cpu_do_idle(); - cpu_leave_lowpower(); - /* We should never return from idle */ - panic("cpu %d unexpectedly exit from shutdown\n", cpu); + /* spin here until hardware takes it down */ + while (1) + ; } int platform_cpu_disable(unsigned int cpu) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5ec0608f2a7..045b3f6a387 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -71,7 +71,7 @@ soft: /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { - if (IS_ENABLED(CONFIG_PHYLIB)) { + if (IS_BUILTIN(CONFIG_PHYLIB)) { /* min rx data delay */ phy_write(phydev, 0x0b, 0x8105); phy_write(phydev, 0x0c, 0x0000); @@ -112,7 +112,7 @@ put_clk: static void __init imx6q_sabrelite_init(void) { - if (IS_ENABLED(CONFIG_PHYLIB)) + if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); imx6q_sabrelite_cko1_setup(); diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index a5717558ee8..a13299d758e 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb -dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c4b64adcbfc..1201191d7f1 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, - IRQ_KIRKWOOD_GE00_ERR); + IRQ_KIRKWOOD_GE00_ERR, 1600); /* The interface forgets the MAC address assigned by u-boot if the clock is turned off, so claim the clk now. */ clk_prepare_enable(ge0); @@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, - IRQ_KIRKWOOD_GE01_ERR); + IRQ_KIRKWOOD_GE01_ERR, 1600); clk_prepare_enable(ge1); } @@ -517,6 +517,13 @@ void __init kirkwood_wdt_init(void) void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); + + /* + * Some Kirkwood devices allocate their coherent buffers from atomic + * context. Increase size of atomic coherent pool to make sure such + * the allocations won't fail. + */ + init_dma_coherent_pool_size(SZ_1M); } int kirkwood_tclk; diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index d9335937959..be90b7d0e10 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/sizes.h> #include <linux/platform_device.h> #include <linux/mtd/partitions.h> #include <linux/ata_platform.h> diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index 4304f951937..7e8a5a2e1ec 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev) struct resource *res; int ret = 0; - if (!pdata && !pdata->pool_name) + if (!pdata || !pdata->pool_name) return -ENODEV; info = kzalloc(sizeof(*info), GFP_KERNEL); diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 62b53d710ef..a9bc84180d2 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -37,7 +37,7 @@ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -static void __init __iomem *win_cfg_base(int win) +static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) { /* * Find the control register base address for this window. diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index b4c53b846c9..3057f7d4329 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, - IRQ_MV78XX0_GE_ERR); + IRQ_MV78XX0_GE_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } @@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, - NO_IRQ); + NO_IRQ, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index a051cb8ae57..d2b6acce8fc 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -18,6 +18,7 @@ #include <plat/board-ams-delta.h> +#include <mach/irqs.h> #include <mach/ams-delta-fiq.h> #include "iomap.h" diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index c53469802c0..6f192c4900b 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -26,6 +26,7 @@ #include <linux/export.h> #include <linux/omapfb.h> #include <linux/io.h> +#include <linux/platform_data/gpio-omap.h> #include <media/soc_camera.h> @@ -37,7 +38,6 @@ #include <plat/board-ams-delta.h> #include <plat/keypad.h> #include <plat/mux.h> -#include <plat/board.h> #include <mach/hardware.h> #include <mach/ams-delta-fiq.h> diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 6872f3fd400..6d985521a39 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -32,7 +32,6 @@ #include <plat/flash.h> #include <plat/fpga.h> #include <plat/keypad.h> -#include <plat/board.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 6ec385e2b98..04b5fdaff83 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -23,7 +23,6 @@ #include <asm/mach/map.h> #include <plat/mux.h> -#include <plat/board.h> #include <mach/usb.h> @@ -52,9 +51,6 @@ static struct omap_usb_config generic1610_usb_config __initdata = { }; #endif -static struct omap_board_config_kernel generic_config[] __initdata = { -}; - static void __init omap_generic_init(void) { #ifdef CONFIG_ARCH_OMAP15XX @@ -76,8 +72,6 @@ static void __init omap_generic_init(void) } #endif - omap_board_config = generic_config; - omap_board_config_size = ARRAY_SIZE(generic_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); } diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index b3f6e943e66..a5ac352d68d 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -41,8 +41,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <plat/omap7xx.h> -#include <plat/board.h> +#include <mach/omap7xx.h> #include <plat/keypad.h> #include <plat/mmc.h> diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 2c0ca8fc338..ec01f03d044 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -26,7 +26,6 @@ #include <asm/mach/map.h> #include <plat/mux.h> -#include <plat/board.h> #include <plat/keypad.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 8784705edb6..3b2d9071022 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -39,6 +39,8 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/i2c/tps65010.h> +#include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/omap1_bl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 26bcb9defcd..49f8d745ea1 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -28,6 +28,7 @@ #include <linux/interrupt.h> #include <linux/apm-emulation.h> #include <linux/omapfb.h> +#include <linux/platform_data/omap1_bl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -37,7 +38,6 @@ #include <plat/mux.h> #include <plat/tc.h> #include <plat/dma.h> -#include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 4d099446dfa..01523cd78e5 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -27,6 +27,7 @@ #include <linux/omapfb.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/platform_data/omap1_bl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -37,7 +38,6 @@ #include <plat/mux.h> #include <plat/dma.h> #include <plat/tc.h> -#include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 355980321c2..a7abce69043 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -30,6 +30,7 @@ #include <linux/omapfb.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/platform_data/omap1_bl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,7 +40,6 @@ #include <plat/mux.h> #include <plat/dma.h> #include <plat/tc.h> -#include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 703d55ecffe..277e0bc60a4 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -32,7 +32,6 @@ #include <plat/fpga.h> #include <plat/flash.h> #include <plat/keypad.h> -#include <plat/board.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 8c665bd16ac..2e1fff26a2f 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -38,7 +38,6 @@ #include <plat/dma.h> #include <plat/irda.h> #include <plat/tc.h> -#include <plat/board.h> #include <plat/keypad.h> #include <plat/board-sx1.h> diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 3497769eb35..1668af3017d 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -35,7 +35,6 @@ #include <plat/flash.h> #include <plat/mux.h> #include <plat/tc.h> -#include <plat/board.h> #include <mach/hardware.h> #include <mach/usb.h> @@ -155,9 +154,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = { .pins[2] = 6, }; -static struct omap_board_config_kernel voiceblue_config[] = { -}; - #define MACHINE_PANICED 1 #define MACHINE_REBOOTING 2 #define MACHINE_REBOOT 4 @@ -275,8 +271,6 @@ static void __init voiceblue_init(void) voiceblue_smc91x_resources[1].start = gpio_to_irq(8); voiceblue_smc91x_resources[1].end = gpio_to_irq(8); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); - omap_board_config = voiceblue_config; - omap_board_config_size = ARRAY_SIZE(voiceblue_config); omap_serial_init(); omap1_usb_init(&voiceblue_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index c007d80dfb6..6a32b9b0dc3 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -25,7 +25,6 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/clkdev_omap.h> -#include <plat/board.h> #include <plat/sram.h> /* for omap_sram_reprogram_clock() */ #include <mach/hardware.h> @@ -788,7 +787,6 @@ u32 cpu_mask; int __init omap1_clk_init(void) { struct omap_clk *c; - const struct omap_clock_config *info; int crystal_type = 0; /* Default 12 MHz */ u32 reg; @@ -837,12 +835,6 @@ int __init omap1_clk_init(void) ck_dpll1_p = clk_get(NULL, "ck_dpll1"); ck_ref_p = clk_get(NULL, "ck_ref"); - info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); - if (info != NULL) { - if (!cpu_is_omap15xx()) - crystal_type = info->system_clock_type; - } - if (cpu_is_omap7xx()) ck_ref.rate = 13000000; if (cpu_is_omap16xx() && crystal_type == 2) diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index fa1fa4deb6a..05fdbd992c7 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -20,12 +20,11 @@ #include <asm/mach/map.h> #include <plat/tc.h> -#include <plat/board.h> #include <plat/mux.h> #include <plat/dma.h> #include <plat/mmc.h> -#include <plat/omap7xx.h> +#include <mach/omap7xx.h> #include <mach/camera.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 3ef7d52316b..b0b0f0f2745 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -27,7 +27,8 @@ #include <plat/dma.h> #include <plat/tc.h> -#include <plat/irqs.h> + +#include <mach/irqs.h> #define OMAP1_DMA_BASE (0xfffed800) #define OMAP1_LOGICAL_DMA_CH_COUNT 17 diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index ebef15e5e7b..98e6f39224a 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -17,6 +17,7 @@ */ #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE #define OMAP1510_GPIO_BASE 0xFFFCE000 diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 2a48cd2e175..33f419236b1 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -17,6 +17,7 @@ */ #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #define OMAP1610_GPIO1_BASE 0xfffbe400 #define OMAP1610_GPIO2_BASE 0xfffbec00 diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index acf12b73eac..958ce9acee9 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -17,6 +17,7 @@ */ #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #define OMAP7XX_GPIO1_BASE 0xfffbc000 #define OMAP7XX_GPIO2_BASE 0xfffbc800 diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h index 23eed0035ed..adb5e764965 100644 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -14,8 +14,6 @@ #ifndef __AMS_DELTA_FIQ_H #define __AMS_DELTA_FIQ_H -#include <plat/irqs.h> - /* * Interrupt number used for passing control from FIQ to IRQ. * IRQ12, described as reserved, has been selected. diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h index e737706a8fe..ebf86c0f4f4 100644 --- a/arch/arm/mach-omap1/include/mach/gpio.h +++ b/arch/arm/mach-omap1/include/mach/gpio.h @@ -1,5 +1,3 @@ /* * arch/arm/mach-omap1/include/mach/gpio.h */ - -#include <plat/gpio.h> diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index 01e35fa106b..84248d250ad 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -1,11 +1,46 @@ /* * arch/arm/mach-omap1/include/mach/hardware.h + * + * Hardware definitions for TI OMAP processors and boards + * + * NOTE: Please put device driver specific defines into a separate header + * file for each driver. + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> + * + * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> + * and Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H +#ifndef __ASM_ARCH_OMAP_HARDWARE_H +#define __ASM_ARCH_OMAP_HARDWARE_H +#include <asm/sizes.h> #ifndef __ASSEMBLER__ +#include <asm/types.h> +#include <plat/cpu.h> + /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these */ @@ -35,7 +70,249 @@ static inline u32 omap_cs3_phys(void) ? 0 : OMAP_CS3_PHYS; } +#endif /* ifndef __ASSEMBLER__ */ + +#include <plat/serial.h> + +/* + * --------------------------------------------------------------------------- + * Common definitions for all OMAP processors + * NOTE: Put all processor or board specific parts to the special header + * files. + * --------------------------------------------------------------------------- + */ + +/* + * ---------------------------------------------------------------------------- + * Timers + * ---------------------------------------------------------------------------- + */ +#define OMAP_MPU_TIMER1_BASE (0xfffec500) +#define OMAP_MPU_TIMER2_BASE (0xfffec600) +#define OMAP_MPU_TIMER3_BASE (0xfffec700) +#define MPU_TIMER_FREE (1 << 6) +#define MPU_TIMER_CLOCK_ENABLE (1 << 5) +#define MPU_TIMER_AR (1 << 1) +#define MPU_TIMER_ST (1 << 0) + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_BASE (0xfffece00) +#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) +#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) +#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) +#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) +#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) +#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) +#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) +#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +#define CK_RATEF 1 +#define CK_IDLEF 2 +#define CK_ENABLEF 4 +#define CK_SELECTF 8 +#define SETARM_IDLE_SHIFT + +/* DPLL control registers */ +#define DPLL_CTL (0xfffecf00) + +/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ +#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) +#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) +#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) +#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) +#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) + +/* + * --------------------------------------------------------------------------- + * UPLD + * --------------------------------------------------------------------------- + */ +#define ULPD_REG_BASE (0xfffe0800) +#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) +#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) +#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) +# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ +# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ +#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) +# define SOFT_UDC_REQ (1 << 4) +# define SOFT_USB_CLK_REQ (1 << 3) +# define SOFT_DPLL_REQ (1 << 0) +#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) +#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) +#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) +#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) +#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) +# define DIS_MMC2_DPLL_REQ (1 << 11) +# define DIS_MMC1_DPLL_REQ (1 << 10) +# define DIS_UART3_DPLL_REQ (1 << 9) +# define DIS_UART2_DPLL_REQ (1 << 8) +# define DIS_UART1_DPLL_REQ (1 << 7) +# define DIS_USB_HOST_DPLL_REQ (1 << 6) +#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) +#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) + +/* + * --------------------------------------------------------------------------- + * Watchdog timer + * --------------------------------------------------------------------------- + */ + +/* Watchdog timer within the OMAP3.2 gigacell */ +#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) +#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) +#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) + +/* + * --------------------------------------------------------------------------- + * Interrupts + * --------------------------------------------------------------------------- + */ +#ifdef CONFIG_ARCH_OMAP1 + +/* + * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c + * or something similar.. -- PFM. + */ + +#define OMAP_IH1_BASE 0xfffecb00 +#define OMAP_IH2_BASE 0xfffe0000 + +#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) +#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) +#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) +#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) +#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) +#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) +#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) + +#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) +#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) +#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) +#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) +#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) +#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) +#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) + +#define IRQ_ITR_REG_OFFSET 0x00 +#define IRQ_MIR_REG_OFFSET 0x04 +#define IRQ_SIR_IRQ_REG_OFFSET 0x10 +#define IRQ_SIR_FIQ_REG_OFFSET 0x14 +#define IRQ_CONTROL_REG_OFFSET 0x18 +#define IRQ_ISR_REG_OFFSET 0x9c +#define IRQ_ILR0_REG_OFFSET 0x1c +#define IRQ_GMR_REG_OFFSET 0xa0 + #endif -#endif -#include <plat/hardware.h> +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define MOD_CONF_CTRL_0 0xfffe1080 +#define MOD_CONF_CTRL_1 0xfffe1110 + +/* + * ---------------------------------------------------------------------------- + * Pin multiplexing registers + * ---------------------------------------------------------------------------- + */ +#define FUNC_MUX_CTRL_0 0xfffe1000 +#define FUNC_MUX_CTRL_1 0xfffe1004 +#define FUNC_MUX_CTRL_2 0xfffe1008 +#define COMP_MODE_CTRL_0 0xfffe100c +#define FUNC_MUX_CTRL_3 0xfffe1010 +#define FUNC_MUX_CTRL_4 0xfffe1014 +#define FUNC_MUX_CTRL_5 0xfffe1018 +#define FUNC_MUX_CTRL_6 0xfffe101C +#define FUNC_MUX_CTRL_7 0xfffe1020 +#define FUNC_MUX_CTRL_8 0xfffe1024 +#define FUNC_MUX_CTRL_9 0xfffe1028 +#define FUNC_MUX_CTRL_A 0xfffe102C +#define FUNC_MUX_CTRL_B 0xfffe1030 +#define FUNC_MUX_CTRL_C 0xfffe1034 +#define FUNC_MUX_CTRL_D 0xfffe1038 +#define PULL_DWN_CTRL_0 0xfffe1040 +#define PULL_DWN_CTRL_1 0xfffe1044 +#define PULL_DWN_CTRL_2 0xfffe1048 +#define PULL_DWN_CTRL_3 0xfffe104c +#define PULL_DWN_CTRL_4 0xfffe10ac + +/* OMAP-1610 specific multiplexing registers */ +#define FUNC_MUX_CTRL_E 0xfffe1090 +#define FUNC_MUX_CTRL_F 0xfffe1094 +#define FUNC_MUX_CTRL_10 0xfffe1098 +#define FUNC_MUX_CTRL_11 0xfffe109c +#define FUNC_MUX_CTRL_12 0xfffe10a0 +#define PU_PD_SEL_0 0xfffe10b4 +#define PU_PD_SEL_1 0xfffe10b8 +#define PU_PD_SEL_2 0xfffe10bc +#define PU_PD_SEL_3 0xfffe10c0 +#define PU_PD_SEL_4 0xfffe10c4 + +/* Timer32K for 1610 and 1710*/ +#define OMAP_TIMER32K_BASE 0xFFFBC400 + +/* + * --------------------------------------------------------------------------- + * TIPB bus interface + * --------------------------------------------------------------------------- + */ +#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 +#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) +#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 +#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) + +/* + * ---------------------------------------------------------------------------- + * MPUI interface + * ---------------------------------------------------------------------------- + */ +#define MPUI_BASE (0xfffec900) +#define MPUI_CTRL (MPUI_BASE + 0x0) +#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) +#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) +#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) +#define MPUI_STATUS_REG (MPUI_BASE + 0x10) +#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) +#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) +#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) + +/* + * ---------------------------------------------------------------------------- + * LED Pulse Generator + * ---------------------------------------------------------------------------- + */ +#define OMAP_LPG1_BASE 0xfffbd000 +#define OMAP_LPG2_BASE 0xfffbd800 +#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) +#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) +#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) +#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) + +/* + * ---------------------------------------------------------------------------- + * Pulse-Width Light + * ---------------------------------------------------------------------------- + */ +#define OMAP_PWL_BASE 0xfffb5800 +#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) +#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) + +/* + * --------------------------------------------------------------------------- + * Processor specific defines + * --------------------------------------------------------------------------- + */ + +#include "omap7xx.h" +#include "omap1510.h" +#include "omap16xx.h" + +#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h index 9292fdc1cb0..729992d7d26 100644 --- a/arch/arm/mach-omap1/include/mach/irqs.h +++ b/arch/arm/mach-omap1/include/mach/irqs.h @@ -1,5 +1,268 @@ /* - * arch/arm/mach-omap1/include/mach/irqs.h + * arch/arm/plat-omap/include/mach/irqs.h + * + * Copyright (C) Greg Lonnon 2001 + * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 + * are different. */ -#include <plat/irqs.h> +#ifndef __ASM_ARCH_OMAP15XX_IRQS_H +#define __ASM_ARCH_OMAP15XX_IRQS_H + +/* + * IRQ numbers for interrupt handler 1 + * + * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below + * + */ +#define INT_CAMERA 1 +#define INT_FIQ 3 +#define INT_RTDX 6 +#define INT_DSP_MMU_ABORT 7 +#define INT_HOST 8 +#define INT_ABORT 9 +#define INT_BRIDGE_PRIV 13 +#define INT_GPIO_BANK1 14 +#define INT_UART3 15 +#define INT_TIMER3 16 +#define INT_DMA_CH0_6 19 +#define INT_DMA_CH1_7 20 +#define INT_DMA_CH2_8 21 +#define INT_DMA_CH3 22 +#define INT_DMA_CH4 23 +#define INT_DMA_CH5 24 +#define INT_TIMER1 26 +#define INT_WD_TIMER 27 +#define INT_BRIDGE_PUB 28 +#define INT_TIMER2 30 +#define INT_LCD_CTRL 31 + +/* + * OMAP-1510 specific IRQ numbers for interrupt handler 1 + */ +#define INT_1510_IH2_IRQ 0 +#define INT_1510_RES2 2 +#define INT_1510_SPI_TX 4 +#define INT_1510_SPI_RX 5 +#define INT_1510_DSP_MAILBOX1 10 +#define INT_1510_DSP_MAILBOX2 11 +#define INT_1510_RES12 12 +#define INT_1510_LB_MMU 17 +#define INT_1510_RES18 18 +#define INT_1510_LOCAL_BUS 29 + +/* + * OMAP-1610 specific IRQ numbers for interrupt handler 1 + */ +#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ +#define INT_1610_IH2_FIQ 2 +#define INT_1610_McBSP2_TX 4 +#define INT_1610_McBSP2_RX 5 +#define INT_1610_DSP_MAILBOX1 10 +#define INT_1610_DSP_MAILBOX2 11 +#define INT_1610_LCD_LINE 12 +#define INT_1610_GPTIMER1 17 +#define INT_1610_GPTIMER2 18 +#define INT_1610_SSR_FIFO_0 29 + +/* + * OMAP-7xx specific IRQ numbers for interrupt handler 1 + */ +#define INT_7XX_IH2_FIQ 0 +#define INT_7XX_IH2_IRQ 1 +#define INT_7XX_USB_NON_ISO 2 +#define INT_7XX_USB_ISO 3 +#define INT_7XX_ICR 4 +#define INT_7XX_EAC 5 +#define INT_7XX_GPIO_BANK1 6 +#define INT_7XX_GPIO_BANK2 7 +#define INT_7XX_GPIO_BANK3 8 +#define INT_7XX_McBSP2TX 10 +#define INT_7XX_McBSP2RX 11 +#define INT_7XX_McBSP2RX_OVF 12 +#define INT_7XX_LCD_LINE 14 +#define INT_7XX_GSM_PROTECT 15 +#define INT_7XX_TIMER3 16 +#define INT_7XX_GPIO_BANK5 17 +#define INT_7XX_GPIO_BANK6 18 +#define INT_7XX_SPGIO_WR 29 + +/* + * IRQ numbers for interrupt handler 2 + * + * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below + */ +#define IH2_BASE 32 + +#define INT_KEYBOARD (1 + IH2_BASE) +#define INT_uWireTX (2 + IH2_BASE) +#define INT_uWireRX (3 + IH2_BASE) +#define INT_I2C (4 + IH2_BASE) +#define INT_MPUIO (5 + IH2_BASE) +#define INT_USB_HHC_1 (6 + IH2_BASE) +#define INT_McBSP3TX (10 + IH2_BASE) +#define INT_McBSP3RX (11 + IH2_BASE) +#define INT_McBSP1TX (12 + IH2_BASE) +#define INT_McBSP1RX (13 + IH2_BASE) +#define INT_UART1 (14 + IH2_BASE) +#define INT_UART2 (15 + IH2_BASE) +#define INT_BT_MCSI1TX (16 + IH2_BASE) +#define INT_BT_MCSI1RX (17 + IH2_BASE) +#define INT_SOSSI_MATCH (19 + IH2_BASE) +#define INT_USB_W2FC (20 + IH2_BASE) +#define INT_1WIRE (21 + IH2_BASE) +#define INT_OS_TIMER (22 + IH2_BASE) +#define INT_MMC (23 + IH2_BASE) +#define INT_GAUGE_32K (24 + IH2_BASE) +#define INT_RTC_TIMER (25 + IH2_BASE) +#define INT_RTC_ALARM (26 + IH2_BASE) +#define INT_MEM_STICK (27 + IH2_BASE) + +/* + * OMAP-1510 specific IRQ numbers for interrupt handler 2 + */ +#define INT_1510_DSP_MMU (28 + IH2_BASE) +#define INT_1510_COM_SPI_RO (31 + IH2_BASE) + +/* + * OMAP-1610 specific IRQ numbers for interrupt handler 2 + */ +#define INT_1610_FAC (0 + IH2_BASE) +#define INT_1610_USB_HHC_2 (7 + IH2_BASE) +#define INT_1610_USB_OTG (8 + IH2_BASE) +#define INT_1610_SoSSI (9 + IH2_BASE) +#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) +#define INT_1610_DSP_MMU (28 + IH2_BASE) +#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) +#define INT_1610_STI (32 + IH2_BASE) +#define INT_1610_STI_WAKEUP (33 + IH2_BASE) +#define INT_1610_GPTIMER3 (34 + IH2_BASE) +#define INT_1610_GPTIMER4 (35 + IH2_BASE) +#define INT_1610_GPTIMER5 (36 + IH2_BASE) +#define INT_1610_GPTIMER6 (37 + IH2_BASE) +#define INT_1610_GPTIMER7 (38 + IH2_BASE) +#define INT_1610_GPTIMER8 (39 + IH2_BASE) +#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) +#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) +#define INT_1610_MMC2 (42 + IH2_BASE) +#define INT_1610_CF (43 + IH2_BASE) +#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) +#define INT_1610_SPI (49 + IH2_BASE) +#define INT_1610_DMA_CH6 (53 + IH2_BASE) +#define INT_1610_DMA_CH7 (54 + IH2_BASE) +#define INT_1610_DMA_CH8 (55 + IH2_BASE) +#define INT_1610_DMA_CH9 (56 + IH2_BASE) +#define INT_1610_DMA_CH10 (57 + IH2_BASE) +#define INT_1610_DMA_CH11 (58 + IH2_BASE) +#define INT_1610_DMA_CH12 (59 + IH2_BASE) +#define INT_1610_DMA_CH13 (60 + IH2_BASE) +#define INT_1610_DMA_CH14 (61 + IH2_BASE) +#define INT_1610_DMA_CH15 (62 + IH2_BASE) +#define INT_1610_NAND (63 + IH2_BASE) +#define INT_1610_SHA1MD5 (91 + IH2_BASE) + +/* + * OMAP-7xx specific IRQ numbers for interrupt handler 2 + */ +#define INT_7XX_HW_ERRORS (0 + IH2_BASE) +#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) +#define INT_7XX_CFCD (2 + IH2_BASE) +#define INT_7XX_CFIREQ (3 + IH2_BASE) +#define INT_7XX_I2C (4 + IH2_BASE) +#define INT_7XX_PCC (5 + IH2_BASE) +#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) +#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) +#define INT_7XX_SYREN_SPI (8 + IH2_BASE) +#define INT_7XX_VLYNQ (9 + IH2_BASE) +#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) +#define INT_7XX_McBSP1TX (11 + IH2_BASE) +#define INT_7XX_McBSP1RX (12 + IH2_BASE) +#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) +#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) +#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) +#define INT_7XX_MCSI (16 + IH2_BASE) +#define INT_7XX_uWireTX (17 + IH2_BASE) +#define INT_7XX_uWireRX (18 + IH2_BASE) +#define INT_7XX_SMC_CD (19 + IH2_BASE) +#define INT_7XX_SMC_IREQ (20 + IH2_BASE) +#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) +#define INT_7XX_TIMER32K (22 + IH2_BASE) +#define INT_7XX_MMC_SDIO (23 + IH2_BASE) +#define INT_7XX_UPLD (24 + IH2_BASE) +#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) +#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) +#define INT_7XX_USB_GENI (29 + IH2_BASE) +#define INT_7XX_USB_OTG (30 + IH2_BASE) +#define INT_7XX_CAMERA_IF (31 + IH2_BASE) +#define INT_7XX_RNG (32 + IH2_BASE) +#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) +#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) +#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) +#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) +#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) +#define INT_7XX_RNG_IDLE (38 + IH2_BASE) +#define INT_7XX_MPUIO (39 + IH2_BASE) +#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) +#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) +#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) +#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_7XX_DMA_CH6 (53 + IH2_BASE) +#define INT_7XX_DMA_CH7 (54 + IH2_BASE) +#define INT_7XX_DMA_CH8 (55 + IH2_BASE) +#define INT_7XX_DMA_CH9 (56 + IH2_BASE) +#define INT_7XX_DMA_CH10 (57 + IH2_BASE) +#define INT_7XX_DMA_CH11 (58 + IH2_BASE) +#define INT_7XX_DMA_CH12 (59 + IH2_BASE) +#define INT_7XX_DMA_CH13 (60 + IH2_BASE) +#define INT_7XX_DMA_CH14 (61 + IH2_BASE) +#define INT_7XX_DMA_CH15 (62 + IH2_BASE) +#define INT_7XX_NAND (63 + IH2_BASE) + +/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and + * 16 MPUIO lines */ +#define OMAP_MAX_GPIO_LINES 192 +#define IH_GPIO_BASE (128 + IH2_BASE) +#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) +#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) + +/* External FPGA handles interrupts on Innovator boards */ +#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) +#ifdef CONFIG_MACH_OMAP_INNOVATOR +#define OMAP_FPGA_NR_IRQS 24 +#else +#define OMAP_FPGA_NR_IRQS 0 +#endif +#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) + +#define NR_IRQS OMAP_FPGA_IRQ_END + +#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) + +#include <mach/hardware.h> + +#ifdef CONFIG_FIQ +#define FIQ_START 1024 +#endif + +#endif diff --git a/arch/arm/plat-omap/include/plat/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h index d2400466813..8fe05d6137c 100644 --- a/arch/arm/plat-omap/include/plat/omap1510.h +++ b/arch/arm/mach-omap1/include/mach/omap1510.h @@ -1,5 +1,4 @@ -/* arch/arm/plat-omap/include/mach/omap1510.h - * +/* * Hardware definitions for TI OMAP1510 processor. * * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/mach-omap1/include/mach/omap16xx.h index e69e1d857b4..cd1c724869c 100644 --- a/arch/arm/plat-omap/include/plat/omap16xx.h +++ b/arch/arm/mach-omap1/include/mach/omap16xx.h @@ -1,5 +1,4 @@ -/* arch/arm/plat-omap/include/mach/omap16xx.h - * +/* * Hardware definitions for TI OMAP1610/5912/1710 processors. * * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/mach-omap1/include/mach/omap7xx.h index 48e4757e1e3..63da994bc60 100644 --- a/arch/arm/plat-omap/include/plat/omap7xx.h +++ b/arch/arm/mach-omap1/include/mach/omap7xx.h @@ -1,5 +1,4 @@ -/* arch/arm/plat-omap/include/mach/omap7xx.h - * +/* * Hardware definitions for TI OMAP7XX processor. * * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index f6b14a14a95..7f4bba9fa02 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -14,6 +14,7 @@ #include <linux/kernel_stat.h> #include <linux/sched.h> #include <linux/io.h> +#include <linux/platform_data/gpio-omap.h> #include <mach/hardware.h> #include <asm/leds.h> diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index ae6dd93b8dd..7b1a3833165 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -6,6 +6,7 @@ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/platform_data/gpio-omap.h> #include <asm/leds.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 6809c9e56c9..0d1709b1a6f 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -22,7 +22,6 @@ #include <asm/mach-types.h> -#include <plat/board.h> #include <plat/mux.h> #include <plat/fpga.h> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index e45bbffb7ee..c1309495eeb 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -63,7 +63,7 @@ config ARCH_OMAP4 select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM - select ARCH_NEEDS_CPU_IDLE_COUPLED + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP config SOC_OMAP5 bool "TI OMAP5" diff --git a/arch/arm/plat-omap/include/plat/am33xx.h b/arch/arm/mach-omap2/am33xx.h index 06c19bb7bca..06c19bb7bca 100644 --- a/arch/arm/plat-omap/include/plat/am33xx.h +++ b/arch/arm/mach-omap2/am33xx.h diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 9511584fdc4..0900eac57d5 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -33,7 +33,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <plat/usb.h> @@ -212,9 +211,6 @@ static struct regulator_init_data sdp2430_vmmc1 = { }; static struct twl4030_gpio_platform_data sdp2430_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, }; static struct twl4030_platform_data sdp2430_twldata = { @@ -235,7 +231,7 @@ static int __init omap2430_i2c_init(void) sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78); omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ, + omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START, &sdp2430_twldata); return 0; } diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index a98c688058a..5453173ff57 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -25,13 +25,11 @@ #include <linux/gpio.h> #include <linux/mmc/host.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/mcspi.h> -#include <plat/board.h> #include <plat/usb.h> #include "common.h" #include <plat/dma.h> @@ -191,9 +189,6 @@ static struct omap_dss_board_info sdp3430_dss_data = { .default_device = &sdp3430_lcd_device, }; -static struct omap_board_config_kernel sdp3430_config[] __initdata = { -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -233,9 +228,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data sdp3430_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(16) | BIT(17), .setup = sdp3430_twl_gpio_setup, @@ -576,8 +568,6 @@ static void __init omap_3430sdp_init(void) int gpio_pendown; omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_board_config = sdp3430_config; - omap_board_config_size = ARRAY_SIZE(sdp3430_config); omap_hsmmc_init(mmc); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 2dc9ba523c7..8518b134598 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -17,7 +17,6 @@ #include <asm/mach/arch.h> #include "common.h" -#include <plat/board.h> #include <plat/gpmc-smc91x.h> #include <plat/usb.h> @@ -67,9 +66,6 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .reset_gpio_port[2] = -EINVAL }; -static struct omap_board_config_kernel sdp_config[] __initdata = { -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -197,8 +193,6 @@ static struct flash_partitions sdp_flash_partitions[] = { static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); - omap_board_config = sdp_config; - omap_board_config_size = ARRAY_SIZE(sdp_config); zoom_peripherals_init(); omap_sdrc_init(h8mbx00u0mer0em_sdrc_params, h8mbx00u0mer0em_sdrc_params); diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index ad8a7d94afc..db43e22526c 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -28,13 +28,11 @@ #include <linux/leds_pwm.h> #include <linux/platform_data/omap4-keypad.h> -#include <mach/hardware.h> #include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> #include <plat/mmc.h> @@ -45,6 +43,7 @@ #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> +#include "soc.h" #include "mux.h" #include "hsmmc.h" #include "control.h" @@ -544,7 +543,6 @@ static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .vibra = &twl6040_vibra, .audpwron_gpio = 127, - .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { @@ -581,7 +579,7 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_V1V8 | TWL_COMMON_REGULATOR_V2V1); omap4_pmic_init("twl6030", &sdp4430_twldata, - &twl6040_data, OMAP44XX_IRQ_SYS_2N); + &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 92432c28673..318feadb1d6 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -21,12 +21,10 @@ #include <linux/init.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> @@ -37,11 +35,6 @@ #define GPIO_USB_POWER 35 #define GPIO_USB_NRESET 38 - -/* Board initialization */ -static struct omap_board_config_kernel am3517_crane_config[] __initdata = { -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -67,9 +60,6 @@ static void __init am3517_crane_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap_board_config = am3517_crane_config; - omap_board_config_size = ARRAY_SIZE(am3517_crane_config); - /* Configure GPIO for EHCI port */ if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) { pr_err("Can not configure mux for GPIO_USB_NRESET %d\n", diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 18f601096ce..403d048a00e 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -25,14 +25,13 @@ #include <linux/can/platform/ti_hecc.h> #include <linux/davinci_emac.h> #include <linux/mmc/host.h> +#include <linux/platform_data/gpio-omap.h> -#include <mach/hardware.h> #include <mach/am35xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> #include <video/omapdss.h> @@ -296,8 +295,7 @@ static struct resource am3517_hecc_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_35XX_HECC0_IRQ, - .end = INT_35XX_HECC0_IRQ, + .start = 24 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }, }; @@ -324,9 +322,6 @@ static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata) platform_device_register(&am3517_hecc_device); } -static struct omap_board_config_kernel am3517_evm_config[] __initdata = { -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -346,8 +341,6 @@ static struct omap2_hsmmc_info mmc[] = { static void __init am3517_evm_init(void) { - omap_board_config = am3517_evm_config; - omap_board_config_size = ARRAY_SIZE(am3517_evm_config); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); am3517_evm_i2c_init(); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index e5fa46bfde2..3e2d76f05af 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -29,13 +29,11 @@ #include <linux/smc91x.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <plat/led.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 97d719047af..34cb90471d9 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -23,6 +23,7 @@ #include <linux/input/matrix_keypad.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #include <linux/i2c/at24.h> #include <linux/i2c/twl.h> @@ -37,7 +38,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/nand.h> #include <plat/gpmc.h> @@ -470,9 +470,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, } static struct twl4030_gpio_platform_data cm_t35_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .setup = cm_t35_twl_gpio_setup, }; @@ -714,13 +711,8 @@ static inline void cm_t35_init_mux(void) {} static inline void cm_t3730_init_mux(void) {} #endif -static struct omap_board_config_kernel cm_t35_config[] __initdata = { -}; - static void __init cm_t3x_common_init(void) { - omap_board_config = cm_t35_config; - omap_board_config_size = ARRAY_SIZE(cm_t35_config); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index a33ad4641d9..27a5450751e 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -38,7 +38,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> #include <plat/nand.h> @@ -90,8 +89,7 @@ static struct resource cm_t3517_hecc_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_35XX_HECC0_IRQ, - .end = INT_35XX_HECC0_IRQ, + .start = 24 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }, }; @@ -249,9 +247,6 @@ static void __init cm_t3517_init_nand(void) static inline void cm_t3517_init_nand(void) {} #endif -static struct omap_board_config_kernel cm_t3517_config[] __initdata = { -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { /* GPIO186 - Green LED */ @@ -285,8 +280,6 @@ static void __init cm_t3517_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap_board_config = cm_t3517_config; - omap_board_config_size = ARRAY_SIZE(cm_t3517_config); cm_t3517_init_leds(); cm_t3517_init_nand(); cm_t3517_init_rtc(); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 6567c1cd557..18b63ad5627 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -32,15 +32,12 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> - -#include <mach/hardware.h> #include <mach/id.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <plat/nand.h> @@ -56,7 +53,6 @@ #include <linux/interrupt.h> #include "sdram-micron-mt46h32m32lf-6.h" - #include "mux.h" #include "hsmmc.h" #include "common-board-devices.h" @@ -236,9 +232,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data devkit8000_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(15) | BIT(16) | BIT(17), diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 53c39d239d6..9017813f9ab 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -16,13 +16,14 @@ #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/io.h> -#include <plat/irqs.h> +#include <plat/cpu.h> #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/onenand.h> #include <plat/tc.h> +#include "common.h" #include "board-flash.h" #define REG_FPGA_REV 0x10 @@ -140,7 +141,6 @@ __init board_nand_init(struct mtd_partition *nand_parts, board_nand_data.devsize = nand_type; board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT; - board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs; gpmc_nand_init(&board_nand_data); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 6f93a20536e..2ea7c577b29 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -16,11 +16,9 @@ #include <linux/of_platform.h> #include <linux/irqdomain.h> -#include <mach/hardware.h> #include <asm/hardware/gic.h> #include <asm/mach/arch.h> -#include <plat/board.h> #include "common.h" #include "common-board-devices.h" diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index ace20482e3e..12569cb0edd 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -27,20 +27,19 @@ #include <linux/io.h> #include <linux/input/matrix_keypad.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> -#include "common.h" #include <plat/menelaus.h> #include <plat/dma.h> #include <plat/gpmc.h> +#include <plat/debug-devices.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> +#include "common.h" #include "mux.h" #include "control.h" diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 28214483aab..8408bb2748a 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -29,10 +29,10 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <plat/usb.h> + #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> #include <plat/onenand.h> @@ -425,9 +425,6 @@ static int igep_twl_gpio_setup(struct device *dev, }; static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .setup = igep_twl_gpio_setup, }; diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index ef9e8297749..3f3a552b103 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -29,18 +29,14 @@ #include <linux/smsc911x.h> #include <linux/mmc/host.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/mcspi.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <mach/board-zoom.h> - -#include <asm/delay.h> #include <plat/usb.h> #include <plat/gpmc-smsc911x.h> @@ -275,9 +271,6 @@ static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) } static struct twl4030_gpio_platform_data ldp_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .setup = ldp_twl_gpio_setup, }; diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 677357ff61a..d8deaea37dc 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -25,14 +25,11 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <plat/board.h> #include "common.h" #include <plat/menelaus.h> -#include <mach/irqs.h> #include <plat/mcspi.h> #include <plat/onenand.h> #include <plat/mmc.h> -#include <plat/serial.h> #include "mux.h" @@ -600,7 +597,7 @@ static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = { static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = { { I2C_BOARD_INFO("menelaus", 0x72), - .irq = INT_24XX_SYS_NIRQ, + .irq = 7 + OMAP_INTC_START, .platform_data = &n8x0_menelaus_platform_data, }, }; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 6202fc76e49..801bcb4c5e2 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,13 +33,11 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <plat/board.h> #include "common.h" #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> @@ -297,9 +295,6 @@ static int beagle_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data beagle_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .pullups = BIT(1), .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ef230a0eb5e..b94873d0c6b 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -40,12 +40,10 @@ #include <linux/mmc/host.h> #include <linux/export.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include <plat/usb.h> #include <plat/nand.h> #include "common.h" @@ -58,6 +56,7 @@ #include "hsmmc.h" #include "common-board-devices.h" +#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 @@ -74,6 +73,18 @@ #define OMAP3EVM_GEN1_ETHR_GPIO_RST 64 #define OMAP3EVM_GEN2_ETHR_GPIO_RST 7 +/* + * OMAP35x EVM revision + * Run time detection of EVM revision is done by reading Ethernet + * PHY ID - + * GEN_1 = 0x01150000 + * GEN_2 = 0x92200000 + */ +enum { + OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */ + OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */ +}; + static u8 omap3_evm_version; u8 get_omap3_evm_rev(void) @@ -376,9 +387,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data omap3evm_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .setup = omap3evm_twl_gpio_setup, }; @@ -525,9 +533,6 @@ static int __init omap3_evm_i2c_init(void) return 0; } -static struct omap_board_config_kernel omap3_evm_config[] __initdata = { -}; - static struct usbhs_omap_board_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -687,9 +692,6 @@ static void __init omap3_evm_init(void) obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux; omap3_mux_init(obm, OMAP_PACKAGE_CBB); - omap_board_config = omap3_evm_config; - omap_board_config_size = ARRAY_SIZE(omap3_evm_config); - omap_mux_init_gpio(63, OMAP_PIN_INPUT); omap_hsmmc_init(mmc); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index fca93d1afd4..b5e56fa83c1 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -30,24 +30,21 @@ #include <linux/i2c/twl.h> #include <linux/mmc/host.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "mux.h" -#include "hsmmc.h" -#include "control.h" -#include "common-board-devices.h" - -#include <plat/mux.h> -#include <plat/board.h> -#include "common.h" #include <plat/gpmc-smsc911x.h> #include <plat/gpmc.h> #include <plat/sdrc.h> #include <plat/usb.h> +#include "common.h" +#include "mux.h" +#include "hsmmc.h" +#include "control.h" +#include "common-board-devices.h" + #define OMAP3LOGIC_SMSC911X_CS 1 #define OMAP3530_LV_SOM_MMC_GPIO_CD 110 @@ -78,9 +75,6 @@ static struct regulator_init_data omap3logic_vmmc1 = { }; static struct twl4030_gpio_platform_data omap3logic_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .pullups = BIT(1), .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 57aebee44fd..e700a98feba 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -40,9 +40,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" -#include <mach/hardware.h> #include <plat/mcspi.h> #include <plat/usb.h> #include <video/omapdss.h> @@ -321,9 +319,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .setup = omap3pandora_twl_gpio_setup, }; diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index b318f5602e3..b8756f0d2a0 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -28,14 +28,17 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/mmc/host.h> +#include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> +#include <linux/interrupt.h> +#include <linux/smsc911x.h> +#include <linux/i2c/at24.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <plat/nand.h> @@ -279,9 +282,6 @@ omap3stalker_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .setup = omap3stalker_twl_gpio_setup, }; @@ -362,9 +362,6 @@ static int __init omap3_stalker_i2c_init(void) #define OMAP3_STALKER_TS_GPIO 175 -static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { -}; - static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; @@ -399,8 +396,6 @@ static void __init omap3_stalker_init(void) { regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); - omap_board_config = omap3_stalker_config; - omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); omap_mux_init_gpio(23, OMAP_PIN_INPUT); omap_hsmmc_init(mmc); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 485d14d6a8c..0e2f838e400 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -37,14 +37,12 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> #include <asm/system_info.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <plat/nand.h> @@ -139,9 +137,6 @@ static int touchbook_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data touchbook_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .pullups = BIT(1), .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 70f6d1d2546..45fe2d3f59b 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -32,19 +32,18 @@ #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> -#include <mach/hardware.h> #include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <video/omapdss.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> #include <plat/mmc.h> #include <video/omap-panel-tfp410.h> +#include "soc.h" #include "hsmmc.h" #include "control.h" #include "mux.h" @@ -263,7 +262,6 @@ static struct twl6040_codec_data twl6040_codec = { static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .audpwron_gpio = 127, - .irq_base = TWL6040_CODEC_IRQ_BASE, }; /* Panda board uses the common PMIC configuration */ @@ -294,7 +292,7 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_V1V8 | TWL_COMMON_REGULATOR_V2V1); omap4_pmic_init("twl6030", &omap4_panda_twldata, - &twl6040_data, OMAP44XX_IRQ_SYS_2N); + &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 779734d8ba3..7a62d1322b7 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -42,16 +42,13 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> #include <plat/gpmc.h> -#include <mach/hardware.h> #include <plat/nand.h> #include <plat/mcspi.h> -#include <plat/mux.h> #include <plat/usb.h> #include "mux.h" @@ -399,9 +396,6 @@ static int overo_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data overo_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .setup = overo_twl_gpio_setup, }; diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 0ad1bb3bdb9..00773a32524 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -27,6 +27,7 @@ #include <plat/gpmc.h> #include "common.h" #include <plat/onenand.h> +#include <plat/serial.h> #include "mux.h" #include "hsmmc.h" @@ -72,9 +73,6 @@ static struct platform_device *rm680_peripherals_devices[] __initdata = { /* TWL */ static struct twl4030_gpio_platform_data rm680_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .pullups = BIT(0), .pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15), }; @@ -87,7 +85,7 @@ static struct twl4030_platform_data rm680_twl_data = { static void __init rm680_i2c_init(void) { omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0); - omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data); + omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); } diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index df2534de336..456049055da 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -28,7 +28,6 @@ #include <asm/system_info.h> #include <plat/mcspi.h> -#include <plat/board.h> #include "common.h" #include <plat/dma.h> #include <plat/gpmc.h> @@ -774,9 +773,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) } static struct twl4030_gpio_platform_data rx51_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(8) | BIT(9) | BIT(10) | BIT(11) @@ -1051,7 +1047,7 @@ static int __init rx51_i2c_init(void) rx51_twldata.vdac->constraints.apply_uV = true; rx51_twldata.vdac->constraints.name = "VDAC"; - omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); + omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 345dd931f76..93b46615000 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -18,13 +18,11 @@ #include <linux/gpio.h> #include <linux/leds.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/mcspi.h> -#include <plat/board.h> #include "common.h" #include <plat/dma.h> #include <plat/gpmc.h> diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index d4c8392cadb..c4f8833b4c3 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -15,13 +15,10 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/irqs.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> @@ -32,15 +29,10 @@ static struct omap_musb_board_data musb_board_data = { .power = 500, }; -static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = { -}; - static void __init ti81xx_evm_init(void) { omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap_board_config = ti81xx_evm_config; - omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config); usb_musb_init(&musb_board_data); } diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index f64f4417306..5ec069e529e 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -22,6 +22,9 @@ #include <mach/board-zoom.h> +#include "soc.h" +#include "common.h" + #define ZOOM_SMSC911X_CS 7 #define ZOOM_SMSC911X_GPIO 158 #define ZOOM_QUADUART_CS 3 diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 28187f134ff..ea79bc299ba 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -18,6 +18,8 @@ #include <video/omapdss.h> #include <mach/board-zoom.h> +#include "common.h" + #define LCD_PANEL_RESET_GPIO_PROD 96 #define LCD_PANEL_RESET_GPIO_PILOT 55 #define LCD_PANEL_QVGA_GPIO 56 diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index b797cb27961..6bcc107b9fc 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -19,6 +19,7 @@ #include <linux/regulator/fixed.h> #include <linux/wl12xx.h> #include <linux/mmc/host.h> +#include <linux/platform_data/gpio-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -251,9 +252,6 @@ static void zoom2_set_hs_extmute(int mute) } static struct twl4030_gpio_platform_data zoom_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .setup = zoom_twl_gpio_setup, }; @@ -281,7 +279,7 @@ static int __init omap_i2c_init(void) codec_data->hs_extmute = 1; codec_data->set_hs_extmute = zoom2_set_hs_extmute; } - omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata); + omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 4e7e56142e6..4994438e1f4 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -22,7 +22,6 @@ #include <asm/mach/arch.h> #include "common.h" -#include <plat/board.h> #include <plat/usb.h> #include <mach/board-zoom.h> diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 3d9d746b221..cabcfdba524 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -33,11 +33,11 @@ #include <linux/cpufreq.h> #include <linux/slab.h> -#include <plat/cpu.h> #include <plat/clock.h> #include <plat/sram.h> #include <plat/sdrc.h> +#include "soc.h" #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index cd7fd0f9114..ae624c3b832 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -22,8 +22,8 @@ #include <asm/div64.h> #include <plat/clock.h> -#include <plat/cpu.h> +#include "soc.h" #include "clock.h" #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index ea3f565ba1a..1a1f97f3ca6 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -22,14 +22,16 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/bitops.h> -#include <trace/events/power.h> #include <asm/cpu.h> + #include <plat/clock.h> -#include "clockdomain.h" -#include <plat/cpu.h> #include <plat/prcm.h> +#include <trace/events/power.h> + +#include "soc.h" +#include "clockdomain.h" #include "clock.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 002745181ad..12c178dbc9f 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -18,9 +18,9 @@ #include <linux/clk.h> #include <linux/list.h> -#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c index dfda9a3f2cb..a8e32617746 100644 --- a/arch/arm/mach-omap2/clock2430.c +++ b/arch/arm/mach-omap2/clock2430.c @@ -21,9 +21,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clock.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index cacabb070e2..02fe1f28aff 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -17,9 +17,9 @@ #include <linux/clk.h> #include <linux/list.h> -#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index 12500097378..e92be1fc1a0 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -22,9 +22,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/cpu.h> #include <plat/clock.h> +#include "soc.h" #include "clock.h" #include "clock2xxx.h" #include "cm.h" diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 25bbcc7ca4d..7aa5ecaee5a 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -18,8 +18,8 @@ #include <linux/list.h> #include <linux/clk.h> #include <plat/clkdev_omap.h> -#include <plat/am33xx.h> +#include "am33xx.h" #include "iomap.h" #include "control.h" #include "clock.h" diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index 794d82702c8..fc2765bcdd4 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -21,9 +21,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clock.h> +#include "soc.h" #include "clock.h" #include "clock3xxx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 83bed9ad301..10a2398e173 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -21,9 +21,9 @@ #include <linux/list.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock3xxx.h" diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index d7f55e43b76..500682c051c 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -28,9 +28,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock44xx.h" diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c index 389f9f8b570..a911e76b4ec 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c @@ -18,8 +18,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/hardware.h> - +#include "soc.h" #include "iomap.h" #include "common.h" #include "cm.h" diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 14734746457..013fedc9e13 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -27,6 +27,7 @@ #include <plat/mcspi.h> #include <plat/nand.h> +#include "common.h" #include "common-board-devices.h" #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ @@ -35,16 +36,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; -/* - * ADS7846 driver maybe request a gpio according to the value - * of pdata->get_pendown_state, but we have done this. So set - * get_pendown_state to avoid twice gpio requesting. - */ -static int omap3_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -55,7 +46,6 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, - .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 4c4ef6a6166..a0b4a42836a 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,7 +4,6 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K -#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 069f9725b1c..8e43c4d885d 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -17,11 +17,10 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> -#include <plat/board.h> #include <plat/mux.h> #include <plat/clock.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 1f65b1871c2..da0f5c18735 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -26,11 +26,18 @@ #define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H #ifndef __ASSEMBLER__ +#include <linux/irq.h> #include <linux/delay.h> #include <linux/i2c/twl.h> -#include <plat/common.h> + #include <asm/proc-fns.h> +#include <plat/cpu.h> +#include <plat/serial.h> +#include <plat/common.h> + +#define OMAP_INTC_START NR_IRQS + #ifdef CONFIG_SOC_OMAP2420 extern void omap242x_map_common_io(void); #else diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 3223b81e753..d1ff8399a22 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -15,9 +15,9 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/sdrc.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "cm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index b8cdc8531b6..c1a5cab0f23 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -21,7 +21,7 @@ #include <mach/ctrl_module_pad_core_44xx.h> #include <mach/ctrl_module_pad_wkup_44xx.h> -#include <plat/am33xx.h> +#include "am33xx.h" #ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index f2a49a48ef5..bc2756959be 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -28,7 +28,6 @@ #include <linux/cpu_pm.h> #include <plat/prcm.h> -#include <plat/irqs.h> #include "powerdomain.h" #include "clockdomain.h" diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index ee05e193fc6..288bee6cbb7 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -238,8 +238,9 @@ int __init omap4_idle_init(void) for_each_cpu(cpu_id, cpu_online_mask) { dev = &per_cpu(omap4_idle_dev, cpu_id); dev->cpu = cpu_id; +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED dev->coupled_cpus = *cpu_online_mask; - +#endif cpuidle_register_driver(&omap4_idle_driver); if (cpuidle_register_device(dev)) { diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c00c68961bb..1efa984b1a4 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -19,19 +19,18 @@ #include <linux/of.h> #include <linux/platform_data/omap4-keypad.h> -#include <mach/hardware.h> -#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/pmu.h> #include "iomap.h" -#include <plat/board.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> #include <plat/omap4-keypad.h> +#include "soc.h" +#include "common.h" #include "mux.h" #include "control.h" #include "devices.h" @@ -112,7 +111,7 @@ static struct resource omap2cam_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_24XX_CAM_IRQ, + .start = 24 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, } }; @@ -201,7 +200,7 @@ static struct resource omap3isp_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_34XX_CAM_IRQ, + .start = 24 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, } }; @@ -435,14 +434,12 @@ static inline void omap_init_mcspi(void) {} #endif static struct resource omap2_pmu_resource = { - .start = 3, - .end = 3, + .start = 3 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }; static struct resource omap3_pmu_resource = { - .start = INT_34XX_BENCH_MPU_EMUL, - .end = INT_34XX_BENCH_MPU_EMUL, + .start = 3 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }; @@ -475,7 +472,7 @@ static struct resource omap2_sham_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_24XX_SHA1MD5, + .start = 51 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, } }; @@ -493,7 +490,7 @@ static struct resource omap3_sham_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_34XX_SHA1MD52_IRQ, + .start = 49 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index b9c8d2f6a81..d8318dc5ee9 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -28,9 +28,9 @@ #include <linux/bitops.h> #include <linux/clkdev.h> -#include <plat/cpu.h> #include <plat/clock.h> +#include "soc.h" #include "clock.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index 9c6a296b3dc..09d0ccccb86 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -15,9 +15,9 @@ #include <linux/io.h> #include <linux/bitops.h> -#include <plat/cpu.h> #include <plat/clock.h> +#include "soc.h" #include "clock.h" #include "clock44xx.h" #include "cm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c index e28e761b7ab..b3566f68a55 100644 --- a/arch/arm/mach-omap2/emu.c +++ b/arch/arm/mach-omap2/emu.c @@ -21,8 +21,7 @@ #include <linux/clk.h> #include <linux/err.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 9ad7d489b0d..7b52bdfc59c 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -21,6 +21,7 @@ #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/of.h> +#include <linux/platform_data/gpio-omap.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 386dec8d235..9e9f47ad618 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -16,20 +16,28 @@ #include <asm/mach/flash.h> -#include <plat/cpu.h> #include <plat/nand.h> -#include <plat/board.h> #include <plat/gpmc.h> -static struct resource gpmc_nand_resource = { - .flags = IORESOURCE_MEM, +#include "soc.h" + +static struct resource gpmc_nand_resource[] = { + { + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + { + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device gpmc_nand_device = { .name = "omap2-nand", .id = 0, - .num_resources = 1, - .resource = &gpmc_nand_resource, + .num_resources = ARRAY_SIZE(gpmc_nand_resource), + .resource = gpmc_nand_resource, }; static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data) @@ -75,6 +83,7 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0); gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND); + gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0); err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t); if (err) return err; @@ -90,12 +99,19 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_nand_device.dev.platform_data = gpmc_nand_data; err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE, - &gpmc_nand_data->phys_base); + (unsigned long *)&gpmc_nand_resource[0].start); if (err < 0) { dev_err(dev, "Cannot request GPMC CS\n"); return err; } + gpmc_nand_resource[0].end = gpmc_nand_resource[0].start + + NAND_IO_SIZE - 1; + + gpmc_nand_resource[1].start = + gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); + gpmc_nand_resource[2].start = + gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); /* Set timings in GPMC */ err = omap2_nand_gpmc_retime(gpmc_nand_data); if (err < 0) { @@ -108,6 +124,8 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1); } + gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); + err = platform_device_register(&gpmc_nand_device); if (err < 0) { dev_err(dev, "Unable to register NAND device\n"); diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index a0fa9bb2bda..b66fb8e5faa 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -18,16 +18,24 @@ #include <asm/mach/flash.h> -#include <plat/cpu.h> #include <plat/onenand.h> -#include <plat/board.h> #include <plat/gpmc.h> +#include "soc.h" + +#define ONENAND_IO_SIZE SZ_128K + static struct omap_onenand_platform_data *gpmc_onenand_data; +static struct resource gpmc_onenand_resource = { + .flags = IORESOURCE_MEM, +}; + static struct platform_device gpmc_onenand_device = { .name = "omap2-onenand", .id = -1, + .num_resources = 1, + .resource = &gpmc_onenand_resource, }; static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) @@ -390,6 +398,8 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) { + int err; + gpmc_onenand_data = _onenand_data; gpmc_onenand_data->onenand_setup = gpmc_onenand_setup; gpmc_onenand_device.dev.platform_data = gpmc_onenand_data; @@ -401,8 +411,19 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) gpmc_onenand_data->flags |= ONENAND_SYNC_READ; } + err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, + (unsigned long *)&gpmc_onenand_resource.start); + if (err < 0) { + pr_err("%s: Cannot request GPMC CS\n", __func__); + return; + } + + gpmc_onenand_resource.end = gpmc_onenand_resource.start + + ONENAND_IO_SIZE - 1; + if (platform_device_register(&gpmc_onenand_device) < 0) { - printk(KERN_ERR "Unable to register OneNAND device\n"); + pr_err("%s: Unable to register OneNAND device\n", __func__); + gpmc_cs_free(gpmc_onenand_data->cs); return; } } diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index ba10c24f3d8..245839dfc72 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -17,10 +17,11 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <plat/board.h> #include <plat/gpmc.h> #include <plat/gpmc-smc91x.h> +#include "soc.h" + static struct omap_smc91x_platform_data *gpmc_cfg; static struct resource gpmc_smc91x_resources[] = { diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index b6c77be3e8f..a3a28878f0c 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -20,7 +20,6 @@ #include <linux/io.h> #include <linux/smsc911x.h> -#include <plat/board.h> #include <plat/gpmc.h> #include <plat/gpmc-smsc911x.h> diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index b2b5759ab0f..055ae8bd943 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -28,8 +28,13 @@ #include <asm/mach-types.h> #include <plat/gpmc.h> +#include <plat/cpu.h> +#include <plat/gpmc.h> #include <plat/sdrc.h> +#include "soc.h" +#include "common.h" + /* GPMC register offsets */ #define GPMC_REVISION 0x00 #define GPMC_SYSCONFIG 0x10 @@ -78,6 +83,15 @@ #define ENABLE_PREFETCH (0x1 << 7) #define DMA_MPU_MODE 2 +/* XXX: Only NAND irq has been considered,currently these are the only ones used + */ +#define GPMC_NR_IRQ 2 + +struct gpmc_client_irq { + unsigned irq; + u32 bitmask; +}; + /* Structure to save gpmc cs context */ struct gpmc_cs_config { u32 config1; @@ -105,6 +119,10 @@ struct omap3_gpmc_regs { struct gpmc_cs_config cs_context[GPMC_CS_NUM]; }; +static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ]; +static struct irq_chip gpmc_irq_chip; +static unsigned gpmc_irq_start; + static struct resource gpmc_mem_root; static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); @@ -682,6 +700,117 @@ int gpmc_prefetch_reset(int cs) } EXPORT_SYMBOL(gpmc_prefetch_reset); +void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) +{ + reg->gpmc_status = gpmc_base + GPMC_STATUS; + reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET + + GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs; + reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET + + GPMC_CS_NAND_ADDRESS + GPMC_CS_SIZE * cs; + reg->gpmc_nand_data = gpmc_base + GPMC_CS0_OFFSET + + GPMC_CS_NAND_DATA + GPMC_CS_SIZE * cs; + reg->gpmc_prefetch_config1 = gpmc_base + GPMC_PREFETCH_CONFIG1; + reg->gpmc_prefetch_config2 = gpmc_base + GPMC_PREFETCH_CONFIG2; + reg->gpmc_prefetch_control = gpmc_base + GPMC_PREFETCH_CONTROL; + reg->gpmc_prefetch_status = gpmc_base + GPMC_PREFETCH_STATUS; + reg->gpmc_ecc_config = gpmc_base + GPMC_ECC_CONFIG; + reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL; + reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG; + reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT; + reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0; +} + +int gpmc_get_client_irq(unsigned irq_config) +{ + int i; + + if (hweight32(irq_config) > 1) + return 0; + + for (i = 0; i < GPMC_NR_IRQ; i++) + if (gpmc_client_irq[i].bitmask & irq_config) + return gpmc_client_irq[i].irq; + + return 0; +} + +static int gpmc_irq_endis(unsigned irq, bool endis) +{ + int i; + u32 regval; + + for (i = 0; i < GPMC_NR_IRQ; i++) + if (irq == gpmc_client_irq[i].irq) { + regval = gpmc_read_reg(GPMC_IRQENABLE); + if (endis) + regval |= gpmc_client_irq[i].bitmask; + else + regval &= ~gpmc_client_irq[i].bitmask; + gpmc_write_reg(GPMC_IRQENABLE, regval); + break; + } + + return 0; +} + +static void gpmc_irq_disable(struct irq_data *p) +{ + gpmc_irq_endis(p->irq, false); +} + +static void gpmc_irq_enable(struct irq_data *p) +{ + gpmc_irq_endis(p->irq, true); +} + +static void gpmc_irq_noop(struct irq_data *data) { } + +static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; } + +static int gpmc_setup_irq(int gpmc_irq) +{ + int i; + u32 regval; + + if (!gpmc_irq) + return -EINVAL; + + gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0); + if (IS_ERR_VALUE(gpmc_irq_start)) { + pr_err("irq_alloc_descs failed\n"); + return gpmc_irq_start; + } + + gpmc_irq_chip.name = "gpmc"; + gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret; + gpmc_irq_chip.irq_enable = gpmc_irq_enable; + gpmc_irq_chip.irq_disable = gpmc_irq_disable; + gpmc_irq_chip.irq_shutdown = gpmc_irq_noop; + gpmc_irq_chip.irq_ack = gpmc_irq_noop; + gpmc_irq_chip.irq_mask = gpmc_irq_noop; + gpmc_irq_chip.irq_unmask = gpmc_irq_noop; + + gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE; + gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT; + + for (i = 0; i < GPMC_NR_IRQ; i++) { + gpmc_client_irq[i].irq = gpmc_irq_start + i; + irq_set_chip_and_handler(gpmc_client_irq[i].irq, + &gpmc_irq_chip, handle_simple_irq); + set_irq_flags(gpmc_client_irq[i].irq, + IRQF_VALID | IRQF_NOAUTOEN); + } + + /* Disable interrupts */ + gpmc_write_reg(GPMC_IRQENABLE, 0); + + /* clear interrupts */ + regval = gpmc_read_reg(GPMC_IRQSTATUS); + gpmc_write_reg(GPMC_IRQSTATUS, regval); + + return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL); +} + static void __init gpmc_mem_init(void) { int cs; @@ -711,8 +840,8 @@ static void __init gpmc_mem_init(void) static int __init gpmc_init(void) { - u32 l, irq; - int cs, ret = -EINVAL; + u32 l; + int ret = -EINVAL; int gpmc_irq; char *ck = NULL; @@ -722,16 +851,16 @@ static int __init gpmc_init(void) l = OMAP2420_GPMC_BASE; else l = OMAP34XX_GPMC_BASE; - gpmc_irq = INT_34XX_GPMC_IRQ; + gpmc_irq = 20 + OMAP_INTC_START; } else if (cpu_is_omap34xx()) { ck = "gpmc_fck"; l = OMAP34XX_GPMC_BASE; - gpmc_irq = INT_34XX_GPMC_IRQ; + gpmc_irq = 20 + OMAP_INTC_START; } else if (cpu_is_omap44xx() || soc_is_omap54xx()) { /* Base address and irq number are same for OMAP4/5 */ ck = "gpmc_ck"; l = OMAP44XX_GPMC_BASE; - gpmc_irq = OMAP44XX_IRQ_GPMC; + gpmc_irq = 20 + OMAP44XX_IRQ_GIC_START; } if (WARN_ON(!ck)) @@ -761,16 +890,7 @@ static int __init gpmc_init(void) gpmc_write_reg(GPMC_SYSCONFIG, l); gpmc_mem_init(); - /* initalize the irq_chained */ - irq = OMAP_GPMC_IRQ_BASE; - for (cs = 0; cs < GPMC_CS_NUM; cs++) { - irq_set_chip_and_handler(irq, &dummy_irq_chip, - handle_simple_irq); - set_irq_flags(irq, IRQF_VALID); - irq++; - } - - ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL); + ret = gpmc_setup_irq(gpmc_irq); if (ret) pr_err("gpmc: irq-%d could not claim: err %d\n", gpmc_irq, ret); @@ -780,12 +900,19 @@ postcore_initcall(gpmc_init); static irqreturn_t gpmc_handle_irq(int irq, void *dev) { - u8 cs; + int i; + u32 regval; + + regval = gpmc_read_reg(GPMC_IRQSTATUS); + + if (!regval) + return IRQ_NONE; + + for (i = 0; i < GPMC_NR_IRQ; i++) + if (regval & gpmc_client_irq[i].bitmask) + generic_handle_irq(gpmc_client_irq[i].irq); - /* check cs to invoke the irq */ - cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7; - if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END) - generic_handle_irq(OMAP_GPMC_IRQ_BASE+cs); + gpmc_write_reg(GPMC_IRQSTATUS, regval); return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index a9675d8d182..80399d74095 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -15,6 +15,8 @@ #include <linux/delay.h> #include <linux/gpio.h> #include <mach/hardware.h> +#include <linux/platform_data/gpio-omap.h> + #include <plat/mmc.h> #include <plat/omap-pm.h> #include <plat/mux.h> diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index a12e224eb97..fc57e67b321 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -19,7 +19,6 @@ * */ -#include <plat/cpu.h> #include <plat/i2c.h> #include "common.h" #include <plat/omap_hwmod.h> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 40373db649a..7219df0e831 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -22,10 +22,10 @@ #include <asm/cputype.h> #include "common.h" -#include <plat/cpu.h> #include <mach/id.h> +#include "soc.h" #include "control.h" static unsigned int omap_revision; diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h index be4d290d57e..5621cc59c9f 100644 --- a/arch/arm/mach-omap2/include/mach/gpio.h +++ b/arch/arm/mach-omap2/include/mach/gpio.h @@ -1,5 +1,3 @@ /* * arch/arm/mach-omap2/include/mach/gpio.h */ - -#include <plat/gpio.h> diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h index 78edf9d33f7..54492dbf697 100644 --- a/arch/arm/mach-omap2/include/mach/hardware.h +++ b/arch/arm/mach-omap2/include/mach/hardware.h @@ -1,5 +1,3 @@ /* * arch/arm/mach-omap2/include/mach/hardware.h */ - -#include <plat/hardware.h> diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h index 44dab772569..ba5282cafa4 100644 --- a/arch/arm/mach-omap2/include/mach/irqs.h +++ b/arch/arm/mach-omap2/include/mach/irqs.h @@ -1,5 +1,3 @@ /* * arch/arm/mach-omap2/include/mach/irqs.h */ - -#include <plat/irqs.h> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 4d2d981ff5c..0d79c23e9f8 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -33,6 +33,7 @@ #include <plat/multi.h> #include <plat/dma.h> +#include "soc.h" #include "iomap.h" #include "voltage.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index bcd83db41bb..efed4f540ad 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -23,8 +23,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" #include "common.h" @@ -49,6 +48,8 @@ #define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) #define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */ #define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */ +#define INTCPS_NR_MIR_REGS 3 +#define INTCPS_NR_IRQS 96 /* * OMAP2 has a number of different interrupt controllers, each interrupt diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 6875be837d9..0d974565f8c 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -16,8 +16,10 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/pm_runtime.h> + #include <plat/mailbox.h> -#include <mach/irqs.h> + +#include "soc.h" #define MAILBOX_REVISION 0x000 #define MAILBOX_MESSAGE(m) (0x040 + 4 * (m)) diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 577cb77db26..d493727632e 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -18,9 +18,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> -#include <mach/irqs.h> #include <plat/dma.h> -#include <plat/cpu.h> #include <plat/mcbsp.h> #include <plat/omap_device.h> #include <linux/pm_runtime.h> diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index fb5bc6cf377..9e57b4aadb0 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -23,6 +23,7 @@ #include <linux/kernel.h> #include <linux/err.h> +#include <linux/platform_data/gpio-omap.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 471e62a74a1..76f9b3c2f58 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -127,7 +127,6 @@ struct omap_mux_partition { * @gpio: GPIO number * @muxnames: available signal modes for a ball * @balls: available balls on the package - * @partition: mux partition */ struct omap_mux { u16 reg_offset; diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index 1be8bcb52e9..df298d46707 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -14,7 +14,9 @@ #include <linux/platform_device.h> #include <plat/iommu.h> -#include <plat/irqs.h> + +#include "soc.h" +#include "common.h" struct iommu_device { resource_size_t base; @@ -29,7 +31,7 @@ static int num_iommu_devices; static struct iommu_device omap3_devices[] = { { .base = 0x480bd400, - .irq = 24, + .irq = 24 + OMAP_INTC_START, .pdata = { .name = "isp", .nr_tlb_entries = 8, @@ -41,7 +43,7 @@ static struct iommu_device omap3_devices[] = { #if defined(CONFIG_OMAP_IOMMU_IVA2) { .base = 0x5d000000, - .irq = 28, + .irq = 28 + OMAP_INTC_START, .pdata = { .name = "iva2", .nr_tlb_entries = 32, @@ -64,7 +66,7 @@ static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES]; static struct iommu_device omap4_devices[] = { { .base = OMAP4_MMU1_BASE, - .irq = OMAP44XX_IRQ_DUCATI_MMU, + .irq = 100 + OMAP44XX_IRQ_GIC_START, .pdata = { .name = "ducati", .nr_tlb_entries = 32, @@ -75,7 +77,7 @@ static struct iommu_device omap4_devices[] = { }, { .base = OMAP4_MMU2_BASE, - .irq = OMAP44XX_IRQ_TESLA_MMU, + .irq = 28 + OMAP44XX_IRQ_GIC_START, .pdata = { .name = "tesla", .nr_tlb_entries = 32, diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 637a1bdf2ac..ff4e6a0e9c7 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -50,9 +50,8 @@ #include <asm/suspend.h> #include <asm/hardware/cache-l2x0.h> -#include <plat/omap44xx.h> - #include "common.h" +#include "omap44xx.h" #include "omap4-sar-layout.h" #include "pm.h" #include "prcm_mpu44xx.h" diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 9a35adf9123..19cc5f504f7 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -24,11 +24,11 @@ #include <asm/hardware/gic.h> #include <asm/smp_scu.h> -#include <mach/hardware.h> #include <mach/omap-secure.h> #include <mach/omap-wakeupgen.h> #include <asm/cputype.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "clockdomain.h" diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 05fdebfaa19..b54427dec2a 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -30,6 +30,7 @@ #include <mach/omap-wakeupgen.h> #include <mach/omap-secure.h> +#include "soc.h" #include "omap4-sar-layout.h" #include "common.h" diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/mach-omap2/omap24xx.h index 92df9e27cc5..641a2c8d2ee 100644 --- a/arch/arm/plat-omap/include/plat/omap24xx.h +++ b/arch/arm/mach-omap2/omap24xx.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/omap24xx.h - * * This file contains the processor specific definitions * of the TI OMAP24XX. * diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/mach-omap2/omap34xx.h index 0d818acf391..c0d1b4b1653 100644 --- a/arch/arm/plat-omap/include/plat/omap34xx.h +++ b/arch/arm/mach-omap2/omap34xx.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/omap34xx.h - * * This file contains the processor specific definitions of the TI OMAP34XX. * * Copyright (C) 2007 Texas Instruments. diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 6f95992f37c..3cd2564ed5c 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -16,27 +16,25 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/memblock.h> -#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/export.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> #include <asm/memblock.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <plat/irqs.h> #include <plat/sram.h> #include <plat/omap-secure.h> #include <plat/mmc.h> -#include <mach/hardware.h> #include <mach/omap-wakeupgen.h> +#include "soc.h" #include "common.h" #include "hsmmc.h" #include "omap4-sar-layout.h" -#include <linux/export.h> #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/mach-omap2/omap44xx.h index c0d478e55c8..43b927b2e2e 100644 --- a/arch/arm/plat-omap/include/plat/omap44xx.h +++ b/arch/arm/mach-omap2/omap44xx.h @@ -39,12 +39,12 @@ #define IRQ_SIR_IRQ 0x0040 #define OMAP44XX_GIC_DIST_BASE 0x48241000 #define OMAP44XX_GIC_CPU_BASE 0x48240100 +#define OMAP44XX_IRQ_GIC_START 32 #define OMAP44XX_SCU_BASE 0x48240000 #define OMAP44XX_LOCAL_TWD_BASE 0x48240600 #define OMAP44XX_L2CACHE_BASE 0x48242000 #define OMAP44XX_WKUPGEN_BASE 0x48281000 #define OMAP44XX_MCPDM_BASE 0x40132000 -#define OMAP44XX_MCPDM_L3_BASE 0x49032000 #define OMAP44XX_SAR_RAM_BASE 0x4a326000 #define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000) diff --git a/arch/arm/plat-omap/include/plat/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h index a2582bb3cab..a2582bb3cab 100644 --- a/arch/arm/plat-omap/include/plat/omap54xx.h +++ b/arch/arm/mach-omap2/omap54xx.h diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 7768804457e..4c6b5a77405 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -139,14 +139,14 @@ #include <linux/slab.h> #include <linux/bootmem.h> -#include "common.h" -#include <plat/cpu.h> -#include "clockdomain.h" -#include "powerdomain.h" #include <plat/clock.h> #include <plat/omap_hwmod.h> #include <plat/prcm.h> +#include "soc.h" +#include "common.h" +#include "clockdomain.h" +#include "powerdomain.h" #include "cm2xxx_3xxx.h" #include "cminst44xx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 50cfab61b0e..4e81637640e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -13,12 +13,9 @@ * XXX these should be marked initdata for multi-OMAP kernels */ #include <plat/omap_hwmod.h> -#include <mach/irqs.h> -#include <plat/cpu.h> #include <plat/dma.h> #include <plat/serial.h> #include <plat/i2c.h> -#include <plat/gpio.h> #include <plat/mcspi.h> #include <plat/dmtimer.h> #include <plat/l3_2xxx.h> @@ -162,9 +159,9 @@ static struct omap_hwmod omap2420_dma_system_hwmod = { /* mailbox */ static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = { - { .name = "dsp", .irq = 26 }, - { .name = "iva", .irq = 34 }, - { .irq = -1 } + { .name = "dsp", .irq = 26 + OMAP_INTC_START, }, + { .name = "iva", .irq = 34 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2420_mailbox_hwmod = { @@ -199,9 +196,9 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { /* mcbsp1 */ static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = { - { .name = "tx", .irq = 59 }, - { .name = "rx", .irq = 60 }, - { .irq = -1 } + { .name = "tx", .irq = 59 + OMAP_INTC_START, }, + { .name = "rx", .irq = 60 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2420_mcbsp1_hwmod = { @@ -225,9 +222,9 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = { /* mcbsp2 */ static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = { - { .name = "tx", .irq = 62 }, - { .name = "rx", .irq = 63 }, - { .irq = -1 } + { .name = "tx", .irq = 62 + OMAP_INTC_START, }, + { .name = "rx", .irq = 63 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2420_mcbsp2_hwmod = { @@ -265,8 +262,8 @@ static struct omap_hwmod_class omap2420_msdi_hwmod_class = { /* msdi1 */ static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = { - { .irq = 83 }, - { .irq = -1 } + { .irq = 83 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = { diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 58b5bc196d3..ceb23c3fa89 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -13,20 +13,17 @@ * XXX these should be marked initdata for multi-OMAP kernels */ #include <plat/omap_hwmod.h> -#include <mach/irqs.h> -#include <plat/cpu.h> #include <plat/dma.h> #include <plat/serial.h> #include <plat/i2c.h> -#include <plat/gpio.h> #include <plat/mcbsp.h> #include <plat/mcspi.h> #include <plat/dmtimer.h> #include <plat/mmc.h> #include <plat/l3_2xxx.h> +#include "soc.h" #include "omap_hwmod_common_data.h" - #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" #include "wd_timer.h" @@ -133,8 +130,8 @@ static struct omap_hwmod omap2430_i2c2_hwmod = { /* gpio5 */ static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = { - { .irq = 33 }, /* INT_24XX_GPIO_BANK5 */ - { .irq = -1 } + { .irq = 33 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK5 */ + { .irq = -1 }, }; static struct omap_hwmod omap2430_gpio5_hwmod = { @@ -173,8 +170,8 @@ static struct omap_hwmod omap2430_dma_system_hwmod = { /* mailbox */ static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = { - { .irq = 26 }, - { .irq = -1 } + { .irq = 26 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_mailbox_hwmod = { @@ -195,8 +192,8 @@ static struct omap_hwmod omap2430_mailbox_hwmod = { /* mcspi3 */ static struct omap_hwmod_irq_info omap2430_mcspi3_mpu_irqs[] = { - { .irq = 91 }, - { .irq = -1 } + { .irq = 91 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = { @@ -250,9 +247,9 @@ static struct omap_hwmod_class usbotg_class = { /* usb_otg_hs */ static struct omap_hwmod_irq_info omap2430_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 92 }, - { .name = "dma", .irq = 93 }, - { .irq = -1 } + { .name = "mc", .irq = 92 + OMAP_INTC_START, }, + { .name = "dma", .irq = 93 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_usbhsotg_hwmod = { @@ -303,11 +300,11 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { /* mcbsp1 */ static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = { - { .name = "tx", .irq = 59 }, - { .name = "rx", .irq = 60 }, - { .name = "ovr", .irq = 61 }, - { .name = "common", .irq = 64 }, - { .irq = -1 } + { .name = "tx", .irq = 59 + OMAP_INTC_START, }, + { .name = "rx", .irq = 60 + OMAP_INTC_START, }, + { .name = "ovr", .irq = 61 + OMAP_INTC_START, }, + { .name = "common", .irq = 64 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_mcbsp1_hwmod = { @@ -331,10 +328,10 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = { /* mcbsp2 */ static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = { - { .name = "tx", .irq = 62 }, - { .name = "rx", .irq = 63 }, - { .name = "common", .irq = 16 }, - { .irq = -1 } + { .name = "tx", .irq = 62 + OMAP_INTC_START, }, + { .name = "rx", .irq = 63 + OMAP_INTC_START, }, + { .name = "common", .irq = 16 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_mcbsp2_hwmod = { @@ -358,10 +355,10 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = { /* mcbsp3 */ static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = { - { .name = "tx", .irq = 89 }, - { .name = "rx", .irq = 90 }, - { .name = "common", .irq = 17 }, - { .irq = -1 } + { .name = "tx", .irq = 89 + OMAP_INTC_START, }, + { .name = "rx", .irq = 90 + OMAP_INTC_START, }, + { .name = "common", .irq = 17 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_mcbsp3_hwmod = { @@ -385,10 +382,10 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = { /* mcbsp4 */ static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = { - { .name = "tx", .irq = 54 }, - { .name = "rx", .irq = 55 }, - { .name = "common", .irq = 18 }, - { .irq = -1 } + { .name = "tx", .irq = 54 + OMAP_INTC_START, }, + { .name = "rx", .irq = 55 + OMAP_INTC_START, }, + { .name = "common", .irq = 18 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = { @@ -418,10 +415,10 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = { /* mcbsp5 */ static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = { - { .name = "tx", .irq = 81 }, - { .name = "rx", .irq = 82 }, - { .name = "common", .irq = 19 }, - { .irq = -1 } + { .name = "tx", .irq = 81 + OMAP_INTC_START, }, + { .name = "rx", .irq = 82 + OMAP_INTC_START, }, + { .name = "common", .irq = 19 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = { @@ -468,8 +465,8 @@ static struct omap_hwmod_class omap2430_mmc_class = { /* MMC/SD/SDIO1 */ static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = { - { .irq = 83 }, - { .irq = -1 } + { .irq = 83 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mmc1_sdma_reqs[] = { @@ -509,8 +506,8 @@ static struct omap_hwmod omap2430_mmc1_hwmod = { /* MMC/SD/SDIO2 */ static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = { - { .irq = 86 }, - { .irq = -1 } + { .irq = 86 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mmc2_sdma_reqs[] = { diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index 102d76e9e9e..bea700e928e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -15,8 +15,6 @@ #include <plat/common.h> #include <plat/hdq1w.h> -#include <mach/irqs.h> - #include "omap_hwmod_common_data.h" /* UART */ @@ -182,126 +180,126 @@ struct omap_hwmod_class iva_hwmod_class = { /* Common MPU IRQ line data */ struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[] = { - { .irq = 37, }, - { .irq = -1 } + { .irq = 37 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[] = { - { .irq = 38, }, - { .irq = -1 } + { .irq = 38 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[] = { - { .irq = 39, }, - { .irq = -1 } + { .irq = 39 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[] = { - { .irq = 40, }, - { .irq = -1 } + { .irq = 40 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[] = { - { .irq = 41, }, - { .irq = -1 } + { .irq = 41 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[] = { - { .irq = 42, }, - { .irq = -1 } + { .irq = 42 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[] = { - { .irq = 43, }, - { .irq = -1 } + { .irq = 43 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[] = { - { .irq = 44, }, - { .irq = -1 } + { .irq = 44 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[] = { - { .irq = 45, }, - { .irq = -1 } + { .irq = 45 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[] = { - { .irq = 46, }, - { .irq = -1 } + { .irq = 46 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[] = { - { .irq = 47, }, - { .irq = -1 } + { .irq = 47 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = { - { .irq = INT_24XX_UART1_IRQ, }, - { .irq = -1 } + { .irq = 72 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[] = { - { .irq = INT_24XX_UART2_IRQ, }, - { .irq = -1 } + { .irq = 73 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[] = { - { .irq = INT_24XX_UART3_IRQ, }, - { .irq = -1 } + { .irq = 74 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_dispc_irqs[] = { - { .irq = 25 }, - { .irq = -1 } + { .irq = 25 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[] = { - { .irq = INT_24XX_I2C1_IRQ, }, - { .irq = -1 } + { .irq = 56 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[] = { - { .irq = INT_24XX_I2C2_IRQ, }, - { .irq = -1 } + { .irq = 57 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_gpio1_irqs[] = { - { .irq = 29 }, /* INT_24XX_GPIO_BANK1 */ - { .irq = -1 } + { .irq = 29 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK1 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_gpio2_irqs[] = { - { .irq = 30 }, /* INT_24XX_GPIO_BANK2 */ - { .irq = -1 } + { .irq = 30 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK2 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_gpio3_irqs[] = { - { .irq = 31 }, /* INT_24XX_GPIO_BANK3 */ - { .irq = -1 } + { .irq = 31 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK3 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_gpio4_irqs[] = { - { .irq = 32 }, /* INT_24XX_GPIO_BANK4 */ - { .irq = -1 } + { .irq = 32 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK4 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_dma_system_irqs[] = { - { .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */ - { .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */ - { .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */ - { .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */ - { .irq = -1 } + { .name = "0", .irq = 12 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ0 */ + { .name = "1", .irq = 13 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ1 */ + { .name = "2", .irq = 14 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ2 */ + { .name = "3", .irq = 15 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ3 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[] = { - { .irq = 65 }, - { .irq = -1 } + { .irq = 65 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = { - { .irq = 66 }, - { .irq = -1 } + { .irq = 66 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = { @@ -320,7 +318,7 @@ struct omap_hwmod_class omap2_hdq1w_class = { }; struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[] = { - { .irq = 58, }, - { .irq = -1 } + { .irq = 58 + OMAP_INTC_START, }, + { .irq = -1 }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index afad69c6ba6..ceb30524234 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -10,21 +10,19 @@ */ #include <plat/omap_hwmod.h> #include <plat/serial.h> -#include <plat/gpio.h> +#include <linux/platform_data/gpio-omap.h> #include <plat/dma.h> #include <plat/dmtimer.h> #include <plat/mcspi.h> -#include <mach/irqs.h> - #include "omap_hwmod_common_data.h" #include "cm-regbits-24xx.h" #include "prm-regbits-24xx.h" #include "wd_timer.h" struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = { - { .irq = 48, }, - { .irq = -1 } + { .irq = 48 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index c9e38200216..75fbbac1392 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -15,26 +15,26 @@ * XXX these should be marked initdata for multi-OMAP kernels */ #include <linux/power/smartreflex.h> +#include <linux/platform_data/gpio-omap.h> #include <plat/omap_hwmod.h> -#include <mach/irqs.h> -#include <plat/cpu.h> #include <plat/dma.h> #include <plat/serial.h> #include <plat/l3_3xxx.h> #include <plat/l4_3xxx.h> #include <plat/i2c.h> -#include <plat/gpio.h> #include <plat/mmc.h> #include <plat/mcbsp.h> #include <plat/mcspi.h> #include <plat/dmtimer.h> +#include <mach/am35xx.h> + +#include "soc.h" #include "omap_hwmod_common_data.h" #include "prm-regbits-34xx.h" #include "cm-regbits-34xx.h" #include "wd_timer.h" -#include <mach/am35xx.h> /* * OMAP3xxx hardware module integration data @@ -51,9 +51,9 @@ /* L3 */ static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = { - { .irq = INT_34XX_L3_DBG_IRQ }, - { .irq = INT_34XX_L3_APP_IRQ }, - { .irq = -1 } + { .irq = 9 + OMAP_INTC_START, }, + { .irq = 10 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_l3_main_hwmod = { @@ -355,8 +355,8 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = { /* timer12 */ static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = { - { .irq = 95, }, - { .irq = -1 } + { .irq = 95 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_timer12_hwmod = { @@ -490,8 +490,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { /* UART4 */ static struct omap_hwmod_irq_info uart4_mpu_irqs[] = { - { .irq = INT_36XX_UART4_IRQ, }, - { .irq = -1 } + { .irq = 80 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info uart4_sdma_reqs[] = { @@ -518,8 +518,8 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { }; static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = { - { .irq = INT_35XX_UART4_IRQ, }, - { .irq = -1 } + { .irq = 84 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = { @@ -674,8 +674,8 @@ static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = { }; static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = { - { .irq = 25 }, - { .irq = -1 } + { .irq = 25 + OMAP_INTC_START, }, + { .irq = -1 }, }; /* dss_dsi1 */ @@ -804,8 +804,8 @@ static struct omap_i2c_dev_attr i2c3_dev_attr = { }; static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = { - { .irq = INT_34XX_I2C3_IRQ, }, - { .irq = -1 } + { .irq = 61 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = { @@ -963,8 +963,8 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = { /* gpio5 */ static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = { - { .irq = 33 }, /* INT_34XX_GPIO_BANK5 */ - { .irq = -1 } + { .irq = 33 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK5 */ + { .irq = -1 }, }; static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { @@ -993,8 +993,8 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = { /* gpio6 */ static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = { - { .irq = 34 }, /* INT_34XX_GPIO_BANK6 */ - { .irq = -1 } + { .irq = 34 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK6 */ + { .irq = -1 }, }; static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { @@ -1098,10 +1098,10 @@ static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = { /* mcbsp1 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = { - { .name = "common", .irq = 16 }, - { .name = "tx", .irq = 59 }, - { .name = "rx", .irq = 60 }, - { .irq = -1 } + { .name = "common", .irq = 16 + OMAP_INTC_START, }, + { .name = "tx", .irq = 59 + OMAP_INTC_START, }, + { .name = "rx", .irq = 60 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { @@ -1125,10 +1125,10 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { /* mcbsp2 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = { - { .name = "common", .irq = 17 }, - { .name = "tx", .irq = 62 }, - { .name = "rx", .irq = 63 }, - { .irq = -1 } + { .name = "common", .irq = 17 + OMAP_INTC_START, }, + { .name = "tx", .irq = 62 + OMAP_INTC_START, }, + { .name = "rx", .irq = 63 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = { @@ -1157,10 +1157,10 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { /* mcbsp3 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = { - { .name = "common", .irq = 22 }, - { .name = "tx", .irq = 89 }, - { .name = "rx", .irq = 90 }, - { .irq = -1 } + { .name = "common", .irq = 22 + OMAP_INTC_START, }, + { .name = "tx", .irq = 89 + OMAP_INTC_START, }, + { .name = "rx", .irq = 90 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = { @@ -1189,10 +1189,10 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { /* mcbsp4 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = { - { .name = "common", .irq = 23 }, - { .name = "tx", .irq = 54 }, - { .name = "rx", .irq = 55 }, - { .irq = -1 } + { .name = "common", .irq = 23 + OMAP_INTC_START, }, + { .name = "tx", .irq = 54 + OMAP_INTC_START, }, + { .name = "rx", .irq = 55 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = { @@ -1222,10 +1222,10 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { /* mcbsp5 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = { - { .name = "common", .irq = 27 }, - { .name = "tx", .irq = 81 }, - { .name = "rx", .irq = 82 }, - { .irq = -1 } + { .name = "common", .irq = 27 + OMAP_INTC_START, }, + { .name = "tx", .irq = 81 + OMAP_INTC_START, }, + { .name = "rx", .irq = 82 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = { @@ -1267,8 +1267,8 @@ static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = { /* mcbsp2_sidetone */ static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = { - { .name = "irq", .irq = 4 }, - { .irq = -1 } + { .name = "irq", .irq = 4 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = { @@ -1289,8 +1289,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = { /* mcbsp3_sidetone */ static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = { - { .name = "irq", .irq = 5 }, - { .irq = -1 } + { .name = "irq", .irq = 5 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = { @@ -1352,8 +1352,8 @@ static struct omap_smartreflex_dev_attr sr1_dev_attr = { }; static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = { - { .irq = 18 }, - { .irq = -1 } + { .irq = 18 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap34xx_sr1_hwmod = { @@ -1397,8 +1397,8 @@ static struct omap_smartreflex_dev_attr sr2_dev_attr = { }; static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = { - { .irq = 19 }, - { .irq = -1 } + { .irq = 19 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap34xx_sr2_hwmod = { @@ -1458,8 +1458,8 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = { }; static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = { - { .irq = 26 }, - { .irq = -1 } + { .irq = 26 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_mailbox_hwmod = { @@ -1549,8 +1549,8 @@ static struct omap_hwmod omap34xx_mcspi2 = { /* mcspi3 */ static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = { - { .name = "irq", .irq = 91 }, /* 91 */ - { .irq = -1 } + { .name = "irq", .irq = 91 + OMAP_INTC_START, }, /* 91 */ + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = { @@ -1585,8 +1585,8 @@ static struct omap_hwmod omap34xx_mcspi3 = { /* mcspi4 */ static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = { - { .name = "irq", .irq = INT_34XX_SPI4_IRQ }, /* 48 */ - { .irq = -1 } + { .name = "irq", .irq = 48 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = { @@ -1638,9 +1638,9 @@ static struct omap_hwmod_class usbotg_class = { /* usb_otg_hs */ static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 92 }, - { .name = "dma", .irq = 93 }, - { .irq = -1 } + { .name = "mc", .irq = 92 + OMAP_INTC_START, }, + { .name = "dma", .irq = 93 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { @@ -1670,8 +1670,8 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { /* usb_otg_hs */ static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 71 }, - { .irq = -1 } + { .name = "mc", .irq = 71 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_class am35xx_usbotg_class = { @@ -1706,8 +1706,8 @@ static struct omap_hwmod_class omap34xx_mmc_class = { /* MMC/SD/SDIO1 */ static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = { - { .irq = 83, }, - { .irq = -1 } + { .irq = 83 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = { @@ -1773,8 +1773,8 @@ static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = { /* MMC/SD/SDIO2 */ static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = { - { .irq = INT_24XX_MMC2_IRQ, }, - { .irq = -1 } + { .irq = 86 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = { @@ -1834,8 +1834,8 @@ static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = { /* MMC/SD/SDIO3 */ static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = { - { .irq = 94, }, - { .irq = -1 } + { .irq = 94 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = { @@ -1893,9 +1893,9 @@ static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = { }; static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = { - { .name = "ohci-irq", .irq = 76 }, - { .name = "ehci-irq", .irq = 77 }, - { .irq = -1 } + { .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, }, + { .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { @@ -1987,8 +1987,8 @@ static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = { }; static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = { - { .name = "tll-irq", .irq = 78 }, - { .irq = -1 } + { .name = "tll-irq", .irq = 78 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { @@ -3214,11 +3214,11 @@ static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = { }; static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = { - { .name = "rxthresh", .irq = INT_35XX_EMAC_C0_RXTHRESH_IRQ }, - { .name = "rx_pulse", .irq = INT_35XX_EMAC_C0_RX_PULSE_IRQ }, - { .name = "tx_pulse", .irq = INT_35XX_EMAC_C0_TX_PULSE_IRQ }, - { .name = "misc_pulse", .irq = INT_35XX_EMAC_C0_MISC_PULSE_IRQ }, - { .irq = -1 } + { .name = "rxthresh", .irq = 67 + OMAP_INTC_START, }, + { .name = "rx_pulse", .irq = 68 + OMAP_INTC_START, }, + { .name = "tx_pulse", .irq = 69 + OMAP_INTC_START }, + { .name = "misc_pulse", .irq = 70 + OMAP_INTC_START }, + { .irq = -1 }, }; static struct omap_hwmod_class am35xx_emac_class = { diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 242aee498ce..b95244b76a1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -19,12 +19,11 @@ */ #include <linux/io.h> +#include <linux/platform_data/gpio-omap.h> #include <linux/power/smartreflex.h> #include <plat/omap_hwmod.h> -#include <plat/cpu.h> #include <plat/i2c.h> -#include <plat/gpio.h> #include <plat/dma.h> #include <plat/mcspi.h> #include <plat/mcbsp.h> diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index e7e8eeae95e..dddb677fed6 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -16,6 +16,7 @@ #include <plat/omap_hwmod.h> +#include "common.h" #include "display.h" /* Common address space across OMAP2xxx */ diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index d15225ff5c4..f447e02102b 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -28,6 +28,7 @@ #include <linux/kernel.h> #include <linux/slab.h> +#include "soc.h" #include "omap_l3_noc.h" /* @@ -190,7 +191,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev) IRQF_DISABLED, "l3-dbg-irq", l3); if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", - OMAP44XX_IRQ_L3_DBG); + 9 + OMAP44XX_IRQ_GIC_START); goto err3; } @@ -200,7 +201,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev) IRQF_DISABLED, "l3-app-irq", l3); if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", - OMAP44XX_IRQ_L3_APP); + 10 + OMAP44XX_IRQ_GIC_START); goto err4; } diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index d52651a05da..593eaea35ce 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -29,6 +29,8 @@ #include <linux/usb.h> #include <plat/usb.h> + +#include "soc.h" #include "control.h" /* OMAP control module register for UTMI PHY */ diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c index 5037e76e4e2..a9e8cf21705 100644 --- a/arch/arm/mach-omap2/opp2420_data.c +++ b/arch/arm/mach-omap2/opp2420_data.c @@ -28,7 +28,7 @@ * http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/ */ -#include <plat/hardware.h> +#include <linux/kernel.h> #include "opp2xxx.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c index 750805c528d..0e75ec3e114 100644 --- a/arch/arm/mach-omap2/opp2430_data.c +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -26,7 +26,7 @@ * This is technically part of the OMAP2xxx clock code. */ -#include <plat/hardware.h> +#include <linux/kernel.h> #include "opp2xxx.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c index d95f3f945d4..75cef5f67a8 100644 --- a/arch/arm/mach-omap2/opp3xxx_data.c +++ b/arch/arm/mach-omap2/opp3xxx_data.c @@ -19,8 +19,6 @@ */ #include <linux/module.h> -#include <plat/cpu.h> - #include "control.h" #include "omap_opp_data.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 2293ba27101..a9fd6d5fe79 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -20,8 +20,7 @@ */ #include <linux/module.h> -#include <plat/cpu.h> - +#include "soc.h" #include "control.h" #include "omap_opp_data.h" #include "pm.h" @@ -94,7 +93,7 @@ int __init omap4_opp_init(void) { int r = -ENODEV; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap443x()) return r; r = omap_init_opp_table(omap44xx_opp_def_list, diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 814bcd90159..3e1345fc071 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -28,7 +28,6 @@ #include <linux/slab.h> #include <plat/clock.h> -#include <plat/board.h> #include "powerdomain.h" #include "clockdomain.h" #include <plat/dmtimer.h> diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 2edeffc923a..8af6cd6ac33 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -29,6 +29,7 @@ #include <linux/irq.h> #include <linux/time.h> #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> @@ -38,9 +39,6 @@ #include <plat/clock.h> #include <plat/sram.h> #include <plat/dma.h> -#include <plat/board.h> - -#include <mach/irqs.h> #include "common.h" #include "prm2xxx_3xxx.h" @@ -352,16 +350,6 @@ int __init omap2_pm_init(void) prcm_setup_regs(); - /* Hack to prevent MPU retention when STI console is enabled. */ - { - const struct omap_sti_console_config *sti; - - sti = omap_get_config(OMAP_TAG_STI_CONSOLE, - struct omap_sti_console_config); - if (sti != NULL && sti->enable) - sti_console_enabled = 1; - } - /* * We copy the assembler sleep/wakeup routines to SRAM. * These routines need to be in SRAM as that's the only diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e4fc88c65db..90480f75997 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -28,6 +28,8 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/platform_data/gpio-omap.h> + #include <trace/events/power.h> #include <asm/suspend.h> @@ -272,21 +274,16 @@ void omap_sram_idle(void) per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(mpu_pwrdm); - pwrdm_pre_transition(neon_pwrdm); - } + pwrdm_pre_transition(NULL); /* PER */ if (per_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -339,20 +336,14 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); - pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); + pwrdm_post_transition(NULL); + /* PER */ - if (per_next_state < PWRDM_POWER_ON) { + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - pwrdm_post_transition(per_pwrdm); - } - - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_post_transition(mpu_pwrdm); - pwrdm_post_transition(neon_pwrdm); - } } static void omap3_pm_idle(void) diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 69b36e185e9..ca5be83d501 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -28,11 +28,13 @@ #include "prm44xx.h" #include <asm/cpu.h> -#include <plat/cpu.h> + +#include <plat/prcm.h> + #include "powerdomain.h" #include "clockdomain.h" -#include <plat/prcm.h> +#include "soc.h" #include "pm.h" #define PWRDM_TRACE_STATES_FLAG (1<<31) diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index bb883e46307..8b23d234fb5 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -15,11 +15,9 @@ #include <linux/init.h> #include <linux/bug.h> -#include <plat/cpu.h> - +#include "soc.h" #include "powerdomain.h" #include "powerdomains2xxx_3xxx_data.h" - #include "prcm-common.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 053e24ed3c4..9c9d23c1020 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -27,7 +27,6 @@ #include "common.h" #include <plat/prcm.h> -#include <plat/irqs.h> #include "clock.h" #include "clock2xxx.h" diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index a0309dea679..9529984d8d2 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -17,11 +17,10 @@ #include <linux/io.h> #include <linux/irq.h> -#include "common.h" -#include <plat/cpu.h> #include <plat/prcm.h> -#include <plat/irqs.h> +#include "soc.h" +#include "common.h" #include "vp.h" #include "prm2xxx_3xxx.h" @@ -40,7 +39,7 @@ static struct omap_prcm_irq_setup omap3_prcm_irq_setup = { .nr_regs = 1, .irqs = omap3_prcm_irqs, .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs), - .irq = INT_34XX_PRCM_MPU_IRQ, + .irq = 11 + OMAP_INTC_START, .read_pending_irqs = &omap3xxx_prm_read_pending_irqs, .ocp_barrier = &omap3xxx_prm_ocp_barrier, .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index bb727c2d933..f0c4d5f4a17 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -17,10 +17,9 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/cpu.h> -#include <plat/irqs.h> #include <plat/prcm.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "vp.h" @@ -40,7 +39,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = { .nr_regs = 2, .irqs = omap4_prcm_irqs, .nr_irqs = ARRAY_SIZE(omap4_prcm_irqs), - .irq = OMAP44XX_IRQ_PRCM, + .irq = 11 + OMAP44XX_IRQ_GIC_START, .read_pending_irqs = &omap44xx_prm_read_pending_irqs, .ocp_barrier = &omap44xx_prm_ocp_barrier, .save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen, diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 03b126d9ad9..6b4d332be2f 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -26,7 +26,6 @@ #include <plat/common.h> #include <plat/prcm.h> -#include <plat/irqs.h> #include "prm2xxx_3xxx.h" #include "prm44xx.h" diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 1133bb2f632..73e55e48532 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,11 +24,11 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clock.h> #include <plat/sram.h> #include <plat/sdrc.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index c1b93c752d7..7ca266e987f 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -29,11 +29,11 @@ #include <plat/omap-serial.h> #include "common.h" -#include <plat/board.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> #include <plat/omap-pm.h> +#include <plat/serial.h> #include "prm2xxx_3xxx.h" #include "pm.h" @@ -81,8 +81,9 @@ static struct omap_uart_port_info omap_serial_default_info[] __initdata = { }; #ifdef CONFIG_PM -static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) +static void omap_uart_enable_wakeup(struct device *dev, bool enable) { + struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); if (!od) @@ -99,15 +100,17 @@ static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) * in Smartidle Mode When Configured for DMA Operations. * WA: configure uart in force idle mode. */ -static void omap_uart_set_noidle(struct platform_device *pdev) +static void omap_uart_set_noidle(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); } -static void omap_uart_set_smartidle(struct platform_device *pdev) +static void omap_uart_set_smartidle(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); u8 idlemode; @@ -120,10 +123,10 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) } #else -static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) +static void omap_uart_enable_wakeup(struct device *dev, bool enable) {} -static void omap_uart_set_noidle(struct platform_device *pdev) {} -static void omap_uart_set_smartidle(struct platform_device *pdev) {} +static void omap_uart_set_noidle(struct device *dev) {} +static void omap_uart_set_smartidle(struct device *dev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -304,6 +307,9 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.dma_rx_timeout = info->dma_rx_timeout; omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate; omap_up.autosuspend_timeout = info->autosuspend_timeout; + omap_up.DTR_gpio = info->DTR_gpio; + omap_up.DTR_inverted = info->DTR_inverted; + omap_up.DTR_present = info->DTR_present; pdata = &omap_up; pdata_size = sizeof(struct omap_uart_port_info); diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index d4bf904d84a..ce0ccd26efb 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -28,8 +28,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <plat/omap24xx.h> - +#include "omap24xx.h" #include "sdrc.h" /* First address of reserved address space? apparently valid for OMAP2 & 3 */ diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 1f62f23673f..506987979c1 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -26,9 +26,9 @@ #include <asm/assembler.h> -#include <plat/hardware.h> #include <plat/sram.h> +#include "omap34xx.h" #include "iomap.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9f6b83d1b19..b7d8ead4b86 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -14,10 +14,10 @@ #include <asm/memory.h> #include <asm/hardware/cache-l2x0.h> -#include <plat/omap44xx.h> #include <mach/omap-secure.h> #include "common.h" +#include "omap44xx.h" #include "omap4-sar-layout.h" #if defined(CONFIG_SMP) && defined(CONFIG_PM) @@ -56,9 +56,13 @@ ppa_por_params: * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. * It returns to the caller for CPU INACTIVE and ON power states or in case * CPU failed to transition to targeted OFF/DORMANT state. + * + * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save + * stack frame and it expects the caller to take care of it. Hence the entire + * stack frame is saved to avoid possible stack corruption. */ ENTRY(omap4_finish_suspend) - stmfd sp!, {lr} + stmfd sp!, {r4-r12, lr} cmp r0, #0x0 beq do_WFI @ No lowpower state, jump to WFI @@ -226,7 +230,7 @@ scu_gp_clear: skip_scu_gp_clear: isb dsb - ldmfd sp!, {pc} + ldmfd sp!, {r4-r12, pc} ENDPROC(omap4_finish_suspend) /* diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h new file mode 100644 index 00000000000..fc9b96daf85 --- /dev/null +++ b/arch/arm/mach-omap2/soc.h @@ -0,0 +1,7 @@ +#include <plat/cpu.h> +#include "omap24xx.h" +#include "omap34xx.h" +#include "omap44xx.h" +#include "ti81xx.h" +#include "am33xx.h" +#include "omap54xx.h" diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index ee0bfcc1410..8f7326cd435 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -32,8 +32,7 @@ #include <asm/assembler.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index d4d39ef0476..b140d657852 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -32,8 +32,7 @@ #include <asm/assembler.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index df5a21322b0..2d0ceaa23fb 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -29,8 +29,7 @@ #include <asm/assembler.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" #include "sdrc.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/plat-omap/include/plat/ti81xx.h b/arch/arm/mach-omap2/ti81xx.h index 8f9843f7842..8f9843f7842 100644 --- a/arch/arm/plat-omap/include/plat/ti81xx.h +++ b/arch/arm/mach-omap2/ti81xx.h diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 31f9c936125..e2084facca5 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -39,14 +39,16 @@ #include <linux/of.h> #include <asm/mach/time.h> -#include <plat/dmtimer.h> #include <asm/smp_twd.h> #include <asm/sched_clock.h> -#include "common.h" + #include <plat/omap_hwmod.h> #include <plat/omap_device.h> +#include <plat/dmtimer.h> #include <plat/omap-pm.h> +#include "soc.h" +#include "common.h" #include "powerdomain.h" /* Parent clocks, eventually these will come from the clock framework */ @@ -374,8 +376,7 @@ OMAP_SYS_TIMER(3_am33xx) #ifdef CONFIG_ARCH_OMAP4 #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - OMAP44XX_LOCAL_TWD_BASE, - OMAP44XX_IRQ_LOCALTIMER); + OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START); #endif static void __init omap4_timer_init(void) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index de47f170ba5..99be94e9454 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -29,6 +29,7 @@ #include <plat/i2c.h> #include <plat/usb.h> +#include "soc.h" #include "twl-common.h" #include "pm.h" #include "voltage.h" @@ -67,6 +68,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) { + omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; @@ -83,7 +85,7 @@ void __init omap4_pmic_init(const char *pmic_type, omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(omap4_i2c1_board_info[0].type, pmic_type, sizeof(omap4_i2c1_board_info[0].type)); - omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; + omap4_i2c1_board_info[0].irq = 7 + OMAP44XX_IRQ_GIC_START; omap4_i2c1_board_info[0].platform_data = pmic_data; /* TWL6040 audio IC part */ diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 8fe71cfd002..d109c09ef34 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -1,7 +1,7 @@ #ifndef __OMAP_PMIC_COMMON__ #define __OMAP_PMIC_COMMON__ -#include <plat/irqs.h> +#include "common.h" #define TWL_COMMON_PDATA_USB (1 << 0) #define TWL_COMMON_PDATA_BCI (1 << 1) @@ -40,13 +40,13 @@ void omap_pmic_late_init(void); static inline void omap2_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data) { - omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data); + omap_pmic_init(2, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data); } static inline void omap3_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data) { - omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); + omap_pmic_init(1, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data); } void omap4_pmic_init(const char *pmic_type, diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index dde8a11f47d..ac95daaa470 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -25,8 +25,6 @@ #include <asm/io.h> -#include <mach/hardware.h> -#include <mach/irqs.h> #include <plat/usb.h> #include <plat/omap_device.h> diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index c4a57685666..89150b2435e 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -23,14 +23,13 @@ #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/io.h> - #include <linux/usb/musb.h> -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/am35xx.h> #include <plat/usb.h> #include <plat/omap_device.h> + +#include <mach/am35xx.h> + #include "mux.h" static struct musb_hdrc_config musb_config = { diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 84da34f9a7c..b451f3c1329 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -12,8 +12,7 @@ #include <linux/init.h> #include <linux/bug.h> -#include <plat/cpu.h> - +#include "soc.h" #include "voltage.h" #include "vc.h" #include "prm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index d0103c80d04..63afbfed3cb 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -18,9 +18,8 @@ #include <linux/err.h> #include <linux/init.h> +#include "soc.h" #include "common.h" -#include <plat/cpu.h> - #include "prm-regbits-34xx.h" #include "omap_opp_data.h" #include "voltage.h" diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 9148b229d0d..410291c6766 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, - IRQ_ORION5X_ETH_ERR); + IRQ_ORION5X_ETH_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 454831b6603..ee99fd56c04 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,8 @@ */ enum dma_ch { - DMACH_XD0, + DMACH_DT_PROP = -1, /* not yet supported, do not use */ + DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, DMACH_SPI0, diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index cf10f92856d..453a6e50db8 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -520,13 +520,14 @@ static struct platform_device hdmi_lcdc_device = { }; /* GPIO KEY */ -#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } +#define GPIO_KEY(c, g, d, ...) \ + { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ } static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW1"), - GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW2"), - GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW3"), - GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW4"), + GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3", .wakeup = 1), + GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"), + GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"), + GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"), }; static struct gpio_keys_platform_data gpio_key_info = { @@ -901,8 +902,8 @@ static struct platform_device *eva_devices[] __initdata = { &camera_device, &ceu0_device, &fsi_device, - &fsi_hdmi_device, &fsi_wm8978_device, + &fsi_hdmi_device, }; static void __init eva_clock_init(void) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7ea2b31e319..c129542f6ae 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -695,6 +695,7 @@ static struct platform_device usbhs0_device = { * - J30 "open" * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET * - add .get_vbus = usbhs_get_vbus in usbhs1_private + * - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices. */ #define IRQ8 evt2irq(0x0300) #define USB_PHY_MODE (1 << 4) @@ -1325,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usbhs1_device, &usbhs0_device, + &usbhs1_device, &leds_device, &fsi_device, &fsi_ak4643_device, diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 3a528cf4366..fcf5a47f477 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -67,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = { static struct platform_device eth_device = { .name = "smsc911x", - .id = 0, + .id = -1, .dev = { .platform_data = &smsc911x_platdata, }, diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index ee447404c85..588555a67d9 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on) return 0; /* always allow wakeup */ } -#define RELOC_BASE 0x1000 +#define RELOC_BASE 0x1200 -/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */ +/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */ #define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE) INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c013bbf79ca..53d3d46dec1 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -41,7 +41,6 @@ config MACH_HREFV60 config MACH_SNOWBALL bool "U8500 Snowball platform" select MACH_MOP500 - select LEDS_GPIO help Include support for the snowball development platform. diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index 99604803874..df15646036a 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent, return pdev; } -/* Platform device for ASoC U8500 machine */ -static struct platform_device snd_soc_u8500 = { - .name = "snd-soc-u8500", +/* Platform device for ASoC MOP500 machine */ +static struct platform_device snd_soc_mop500 = { + .name = "snd-soc-mop500", .id = 0, .dev = { .platform_data = NULL, @@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent) { struct platform_device *msp1; - pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); - platform_device_register(&snd_soc_u8500); + pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); + platform_device_register(&snd_soc_mop500); pr_info("Initialize MSP I2S-devices.\n"); db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 8674a890fd1..1d2e3c6f8b5 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -524,33 +524,12 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = { }; #endif -#define PRCC_K_SOFTRST_SET 0x18 -#define PRCC_K_SOFTRST_CLEAR 0x1C -static void ux500_uart0_reset(void) -{ - void __iomem *prcc_rst_set, *prcc_rst_clr; - - prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + - PRCC_K_SOFTRST_SET); - prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + - PRCC_K_SOFTRST_CLEAR); - - /* Activate soft reset PRCC_K_SOFTRST_CLEAR */ - writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr); - udelay(1); - - /* Release soft reset PRCC_K_SOFTRST_SET */ - writel((readl(prcc_rst_set) | 0x1), prcc_rst_set); - udelay(1); -} - static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif - .reset = ux500_uart0_reset, }; static struct amba_pl011_data uart1_plat = { @@ -797,6 +776,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -804,6 +784,8 @@ static void __init u8500_init_machine(void) mop500_uib_init(); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { + mop500_msp_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -815,6 +797,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4e7d1182e8a..051204fc461 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -267,17 +267,19 @@ static void __dma_free_remap(void *cpu_addr, size_t size) vunmap(cpu_addr); } +#define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K + struct dma_pool { size_t size; spinlock_t lock; unsigned long *bitmap; unsigned long nr_pages; void *vaddr; - struct page *page; + struct page **pages; }; static struct dma_pool atomic_pool = { - .size = SZ_256K, + .size = DEFAULT_DMA_COHERENT_POOL_SIZE, }; static int __init early_coherent_pool(char *p) @@ -287,6 +289,21 @@ static int __init early_coherent_pool(char *p) } early_param("coherent_pool", early_coherent_pool); +void __init init_dma_coherent_pool_size(unsigned long size) +{ + /* + * Catch any attempt to set the pool size too late. + */ + BUG_ON(atomic_pool.vaddr); + + /* + * Set architecture specific coherent pool size only if + * it has not been changed by kernel command line parameter. + */ + if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE) + atomic_pool.size = size; +} + /* * Initialise the coherent pool for atomic allocations. */ @@ -297,6 +314,7 @@ static int __init atomic_pool_init(void) unsigned long nr_pages = pool->size >> PAGE_SHIFT; unsigned long *bitmap; struct page *page; + struct page **pages; void *ptr; int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long); @@ -304,21 +322,31 @@ static int __init atomic_pool_init(void) if (!bitmap) goto no_bitmap; + pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL); + if (!pages) + goto no_pages; + if (IS_ENABLED(CONFIG_CMA)) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page); else ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, &page, NULL); if (ptr) { + int i; + + for (i = 0; i < nr_pages; i++) + pages[i] = page + i; + spin_lock_init(&pool->lock); pool->vaddr = ptr; - pool->page = page; + pool->pages = pages; pool->bitmap = bitmap; pool->nr_pages = nr_pages; pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n", (unsigned)pool->size / 1024); return 0; } +no_pages: kfree(bitmap); no_bitmap: pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n", @@ -443,27 +471,45 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) if (pageno < pool->nr_pages) { bitmap_set(pool->bitmap, pageno, count); ptr = pool->vaddr + PAGE_SIZE * pageno; - *ret_page = pool->page + pageno; + *ret_page = pool->pages[pageno]; + } else { + pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n" + "Please increase it with coherent_pool= kernel parameter!\n", + (unsigned)pool->size / 1024); } spin_unlock_irqrestore(&pool->lock, flags); return ptr; } +static bool __in_atomic_pool(void *start, size_t size) +{ + struct dma_pool *pool = &atomic_pool; + void *end = start + size; + void *pool_start = pool->vaddr; + void *pool_end = pool->vaddr + pool->size; + + if (start < pool_start || start > pool_end) + return false; + + if (end <= pool_end) + return true; + + WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n", + start, end - 1, pool_start, pool_end - 1); + + return false; +} + static int __free_from_pool(void *start, size_t size) { struct dma_pool *pool = &atomic_pool; unsigned long pageno, count; unsigned long flags; - if (start < pool->vaddr || start > pool->vaddr + pool->size) + if (!__in_atomic_pool(start, size)) return 0; - if (start + size > pool->vaddr + pool->size) { - WARN(1, "freeing wrong coherent size from pool\n"); - return 0; - } - pageno = (start - pool->vaddr) >> PAGE_SHIFT; count = size >> PAGE_SHIFT; @@ -1090,10 +1136,22 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si return 0; } +static struct page **__atomic_get_pages(void *addr) +{ + struct dma_pool *pool = &atomic_pool; + struct page **pages = pool->pages; + int offs = (addr - pool->vaddr) >> PAGE_SHIFT; + + return pages + offs; +} + static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) { struct vm_struct *area; + if (__in_atomic_pool(cpu_addr, PAGE_SIZE)) + return __atomic_get_pages(cpu_addr); + if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) return cpu_addr; @@ -1103,6 +1161,34 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) return NULL; } +static void *__iommu_alloc_atomic(struct device *dev, size_t size, + dma_addr_t *handle) +{ + struct page *page; + void *addr; + + addr = __alloc_from_pool(size, &page); + if (!addr) + return NULL; + + *handle = __iommu_create_mapping(dev, &page, size); + if (*handle == DMA_ERROR_CODE) + goto err_mapping; + + return addr; + +err_mapping: + __free_from_pool(addr, size); + return NULL; +} + +static void __iommu_free_atomic(struct device *dev, struct page **pages, + dma_addr_t handle, size_t size) +{ + __iommu_remove_mapping(dev, handle, size); + __free_from_pool(page_address(pages[0]), size); +} + static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs) { @@ -1113,6 +1199,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); + if (gfp & GFP_ATOMIC) + return __iommu_alloc_atomic(dev, size, handle); + pages = __iommu_alloc_buffer(dev, size, gfp); if (!pages) return NULL; @@ -1179,6 +1268,11 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, return; } + if (__in_atomic_pool(cpu_addr, size)) { + __iommu_free_atomic(dev, pages, handle, size); + return; + } + if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) { unmap_kernel_range((unsigned long)cpu_addr, size); vunmap(cpu_addr); diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index dd36eba9506..d15a4a6d614 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -25,6 +25,7 @@ config ARCH_OMAP2PLUS bool "TI OMAP2/3/4" select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP + select SPARSE_IRQ select OMAP_DM_TIMER select USE_OF select PROC_DEVICETREE if PROC_FS diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 961bf859bc0..a017e994e00 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,8 +3,7 @@ # # Common support -obj-y := common.o sram.o clock.o devices.o dma.o mux.o \ - fb.o counter_32k.o +obj-y := common.o sram.o clock.o dma.o mux.o fb.o counter_32k.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 89a3723b353..e5778ed689d 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -17,52 +17,12 @@ #include <linux/dma-mapping.h> #include <plat/common.h> -#include <plat/board.h> #include <plat/vram.h> #include <plat/dsp.h> #include <plat/dma.h> #include <plat/omap-secure.h> - -#define NO_LENGTH_CHECK 0xffffffff - -struct omap_board_config_kernel *omap_board_config __initdata; -int omap_board_config_size; - -static const void *__init get_config(u16 tag, size_t len, - int skip, size_t *len_out) -{ - struct omap_board_config_kernel *kinfo = NULL; - int i; - - /* Try to find the config from the board-specific structures - * in the kernel. */ - for (i = 0; i < omap_board_config_size; i++) { - if (omap_board_config[i].tag == tag) { - if (skip == 0) { - kinfo = &omap_board_config[i]; - break; - } else { - skip--; - } - } - } - if (kinfo == NULL) - return NULL; - return kinfo->data; -} - -const void *__init __omap_get_config(u16 tag, size_t len, int nr) -{ - return get_config(tag, len, nr, NULL); -} - -const void *__init omap_get_var_config(u16 tag, size_t *len) -{ - return get_config(tag, NO_LENGTH_CHECK, 0, len); -} - void __init omap_reserve(void) { omap_vram_reserve_sdram_memblock(); diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index dbf1e03029a..2e826f1faf7 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -22,10 +22,7 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> -#include <plat/hardware.h> #include <plat/common.h> -#include <plat/board.h> - #include <plat/clock.h> /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index caa1f7b6cc2..c7a4c0902b3 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -17,9 +17,6 @@ #include <mach/hardware.h> -#include <plat/board.h> - - /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. */ diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index 39407cbe34c..195aaae6587 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -12,6 +12,7 @@ #include <linux/platform_device.h> #include <linux/leds.h> #include <linux/io.h> +#include <linux/platform_data/gpio-omap.h> #include <mach/hardware.h> #include <asm/leds.h> diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c deleted file mode 100644 index 1cba9273d2c..00000000000 --- a/arch/arm/plat-omap/devices.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * linux/arch/arm/plat-omap/devices.c - * - * Common platform device setup/initialization for OMAP1 and OMAP2 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include <linux/gpio.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/memblock.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/map.h> -#include <asm/memblock.h> - -#include <plat/tc.h> -#include <plat/board.h> -#include <plat/mmc.h> -#include <plat/menelaus.h> -#include <plat/omap44xx.h> - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) - -#ifdef CONFIG_ARCH_OMAP2 -#define OMAP_RNG_BASE 0x480A0000 -#else -#define OMAP_RNG_BASE 0xfffe5000 -#endif - -static struct resource rng_resources[] = { - { - .start = OMAP_RNG_BASE, - .end = OMAP_RNG_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_rng_device = { - .name = "omap_rng", - .id = -1, - .num_resources = ARRAY_SIZE(rng_resources), - .resource = rng_resources, -}; - -static void omap_init_rng(void) -{ - (void) platform_device_register(&omap_rng_device); -} -#else -static inline void omap_init_rng(void) {} -#endif - -/* - * This gets called after board-specific INIT_MACHINE, and initializes most - * on-chip peripherals accessible on this board (except for few like USB): - * - * (a) Does any "standard config" pin muxing needed. Board-specific - * code will have muxed GPIO pins and done "nonstandard" setup; - * that code could live in the boot loader. - * (b) Populating board-specific platform_data with the data drivers - * rely on to handle wiring variations. - * (c) Creating platform devices as meaningful on this board and - * with this kernel configuration. - * - * Claiming GPIOs, and setting their direction and initial values, is the - * responsibility of the device drivers. So is responding to probe(). - * - * Board-specific knowledge like creating devices or pin setup is to be - * kept out of drivers as much as possible. In particular, pin setup - * may be handled by the boot loader, and drivers should expect it will - * normally have been done by the time they're probed. - */ -static int __init omap_init_devices(void) -{ - /* please keep these calls, and their implementations above, - * in alphabetical order so they're easier to sort through. - */ - omap_init_rng(); - return 0; -} -arch_initcall(omap_init_devices); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 7fe626761e5..6dcad5873d5 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -36,9 +36,8 @@ #include <linux/slab.h> #include <linux/delay.h> -#include <mach/hardware.h> +#include <plat/cpu.h> #include <plat/dma.h> - #include <plat/tc.h> /* diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 626ad8cad7a..938b50a3343 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer->reserved = 1; break; } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer request failed!\n", __func__); @@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) break; } } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer%d request failed!\n", __func__, id); @@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { - pm_runtime_put(&timer->pdev->dev); + pm_runtime_put_sync(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_disable); diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index dd6f92c99e5..bcbb9d5dc29 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -33,8 +33,6 @@ #include <mach/hardware.h> #include <asm/mach/map.h> -#include <plat/board.h> - #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) static bool omapfb_lcd_configured; diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index db071bc71c4..40bc06a7ac4 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -39,6 +39,7 @@ #define OMAP_I2C_SIZE 0x3f #define OMAP1_I2C_BASE 0xfffb3800 +#define OMAP1_INT_I2C (32 + 4) static const char name[] = "omap_i2c"; @@ -105,7 +106,7 @@ static inline int omap1_i2c_add_bus(int bus_id) res = pdev->resource; res[0].start = OMAP1_I2C_BASE; res[0].end = res[0].start + OMAP_I2C_SIZE; - res[1].start = INT_I2C; + res[1].start = OMAP1_INT_I2C; pdata = &i2c_pdata[bus_id - 1]; /* all OMAP1 have IP version 1 register set */ diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h deleted file mode 100644 index e62f20a5c0a..00000000000 --- a/arch/arm/plat-omap/include/plat/board.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board.h - * - * Information structures for board-specific data - * - * Copyright (C) 2004 Nokia Corporation - * Written by Juha Yrjölä <juha.yrjola@nokia.com> - */ - -#ifndef _OMAP_BOARD_H -#define _OMAP_BOARD_H - -#include <linux/types.h> - -#include <plat/gpio-switch.h> - -/* - * OMAP35x EVM revision - * Run time detection of EVM revision is done by reading Ethernet - * PHY ID - - * GEN_1 = 0x01150000 - * GEN_2 = 0x92200000 - */ -enum { - OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */ - OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */ -}; - -/* Different peripheral ids */ -#define OMAP_TAG_CLOCK 0x4f01 -#define OMAP_TAG_GPIO_SWITCH 0x4f06 -#define OMAP_TAG_STI_CONSOLE 0x4f09 -#define OMAP_TAG_CAMERA_SENSOR 0x4f0a - -#define OMAP_TAG_BOOT_REASON 0x4f80 -#define OMAP_TAG_FLASH_PART 0x4f81 -#define OMAP_TAG_VERSION_STR 0x4f82 - -struct omap_clock_config { - /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ - u8 system_clock_type; -}; - -struct omap_serial_console_config { - u8 console_uart; - u32 console_speed; -}; - -struct omap_sti_console_config { - unsigned enable:1; - u8 channel; -}; - -struct omap_camera_sensor_config { - u16 reset_gpio; - int (*power_on)(void * data); - int (*power_off)(void * data); -}; - -struct omap_lcd_config { - char panel_name[16]; - char ctrl_name[16]; - s16 nreset_gpio; - u8 data_lines; -}; - -struct device; -struct fb_info; -struct omap_backlight_config { - int default_intensity; - int (*set_power)(struct device *dev, int state); -}; - -struct omap_fbmem_config { - u32 start; - u32 size; -}; - -struct omap_pwm_led_platform_data { - const char *name; - int intensity_timer; - int blink_timer; - void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); -}; - -struct omap_uart_config { - /* Bit field of UARTs present; bit 0 --> UART1 */ - unsigned int enabled_uarts; -}; - - -struct omap_flash_part_config { - char part_table[0]; -}; - -struct omap_boot_reason_config { - char reason_str[12]; -}; - -struct omap_version_config { - char component[12]; - char version[12]; -}; - -struct omap_board_config_entry { - u16 tag; - u16 len; - u8 data[0]; -}; - -struct omap_board_config_kernel { - u16 tag; - const void *data; -}; - -extern const void *__init __omap_get_config(u16 tag, size_t len, int nr); - -#define omap_get_config(tag, type) \ - ((const type *) __omap_get_config((tag), sizeof(type), 0)) -#define omap_get_nr_config(tag, type, nr) \ - ((const type *) __omap_get_config((tag), sizeof(type), (nr))) - -extern const void *__init omap_get_var_config(u16 tag, size_t *len); - -extern struct omap_board_config_kernel *omap_board_config; -extern int omap_board_config_size; - - -/* for TI reference platforms sharing the same debug card */ -extern int debug_card_init(u32 addr, unsigned gpio); - -/* OMAP3EVM revision */ -#if defined(CONFIG_MACH_OMAP3EVM) -u8 get_omap3_evm_rev(void); -#else -#define get_omap3_evm_rev() (-EINVAL) -#endif -#endif diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 68b180edcff..67da857783c 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -30,6 +30,8 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H +#ifndef __ASSEMBLY__ + #include <linux/bitops.h> #include <plat/multi.h> @@ -372,7 +374,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx()) + cpu_is_omap44xx() || soc_is_omap54xx() || \ + soc_is_am33xx()) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 @@ -492,4 +495,5 @@ OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) +#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h new file mode 100644 index 00000000000..a4edbd2f748 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/debug-devices.h @@ -0,0 +1,9 @@ +#ifndef _OMAP_DEBUG_DEVICES_H +#define _OMAP_DEBUG_DEVICES_H + +#include <linux/types.h> + +/* for TI reference platforms sharing the same debug card */ +extern int debug_card_init(u32 addr, unsigned gpio); + +#endif diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index c5811d4409b..0a87b052f8f 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -31,6 +31,8 @@ /* Move omap4 specific defines to dma-44xx.h */ #include "dma-44xx.h" +#define INT_DMA_LCD 25 + /* DMA channels for omap1 */ #define OMAP_DMA_NO_DEVICE 0 #define OMAP_DMA_MCSI1_TX 1 diff --git a/arch/arm/plat-omap/include/plat/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h deleted file mode 100644 index 10da0e07c0c..00000000000 --- a/arch/arm/plat-omap/include/plat/gpio-switch.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * GPIO switch definitions - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H -#define __ASM_ARCH_OMAP_GPIO_SWITCH_H - -#include <linux/types.h> - -/* Cover: - * high -> closed - * low -> open - * Connection: - * high -> connected - * low -> disconnected - * Activity: - * high -> active - * low -> inactive - * - */ -#define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000 -#define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001 -#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY 0x0002 -#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001 -#define OMAP_GPIO_SWITCH_FLAG_OUTPUT 0x0002 - -struct omap_gpio_switch { - const char *name; - s16 gpio; - unsigned flags:4; - unsigned type:4; - - /* Time in ms to debounce when transitioning from - * inactive state to active state. */ - u16 debounce_rising; - /* Same for transition from active to inactive state. */ - u16 debounce_falling; - - /* notify board-specific code about state changes */ - void (* notify)(void *data, int state); - void *notify_data; -}; - -/* Call at init time only */ -extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl, - int count); - -#endif diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h deleted file mode 100644 index 50fb7cc000e..00000000000 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ /dev/null @@ -1,228 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpio.h - * - * OMAP GPIO handling defines and functions - * - * Copyright (C) 2003-2005 Nokia Corporation - * - * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_OMAP_GPIO_H -#define __ASM_ARCH_OMAP_GPIO_H - -#include <linux/io.h> -#include <linux/platform_device.h> -#include <mach/irqs.h> - -#define OMAP1_MPUIO_BASE 0xfffb5000 - -/* - * These are the omap15xx/16xx offsets. The omap7xx offset are - * OMAP_MPUIO_ / 2 offsets below. - */ -#define OMAP_MPUIO_INPUT_LATCH 0x00 -#define OMAP_MPUIO_OUTPUT 0x04 -#define OMAP_MPUIO_IO_CNTL 0x08 -#define OMAP_MPUIO_KBR_LATCH 0x10 -#define OMAP_MPUIO_KBC 0x14 -#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18 -#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c -#define OMAP_MPUIO_KBD_INT 0x20 -#define OMAP_MPUIO_GPIO_INT 0x24 -#define OMAP_MPUIO_KBD_MASKIT 0x28 -#define OMAP_MPUIO_GPIO_MASKIT 0x2c -#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 -#define OMAP_MPUIO_LATCH 0x34 - -#define OMAP34XX_NR_GPIOS 6 - -/* - * OMAP1510 GPIO registers - */ -#define OMAP1510_GPIO_DATA_INPUT 0x00 -#define OMAP1510_GPIO_DATA_OUTPUT 0x04 -#define OMAP1510_GPIO_DIR_CONTROL 0x08 -#define OMAP1510_GPIO_INT_CONTROL 0x0c -#define OMAP1510_GPIO_INT_MASK 0x10 -#define OMAP1510_GPIO_INT_STATUS 0x14 -#define OMAP1510_GPIO_PIN_CONTROL 0x18 - -#define OMAP1510_IH_GPIO_BASE 64 - -/* - * OMAP1610 specific GPIO registers - */ -#define OMAP1610_GPIO_REVISION 0x0000 -#define OMAP1610_GPIO_SYSCONFIG 0x0010 -#define OMAP1610_GPIO_SYSSTATUS 0x0014 -#define OMAP1610_GPIO_IRQSTATUS1 0x0018 -#define OMAP1610_GPIO_IRQENABLE1 0x001c -#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 -#define OMAP1610_GPIO_DATAIN 0x002c -#define OMAP1610_GPIO_DATAOUT 0x0030 -#define OMAP1610_GPIO_DIRECTION 0x0034 -#define OMAP1610_GPIO_EDGE_CTRL1 0x0038 -#define OMAP1610_GPIO_EDGE_CTRL2 0x003c -#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c -#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 -#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 -#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc -#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 -#define OMAP1610_GPIO_SET_DATAOUT 0x00f0 - -/* - * OMAP7XX specific GPIO registers - */ -#define OMAP7XX_GPIO_DATA_INPUT 0x00 -#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 -#define OMAP7XX_GPIO_DIR_CONTROL 0x08 -#define OMAP7XX_GPIO_INT_CONTROL 0x0c -#define OMAP7XX_GPIO_INT_MASK 0x10 -#define OMAP7XX_GPIO_INT_STATUS 0x14 - -/* - * omap2+ specific GPIO registers - */ -#define OMAP24XX_GPIO_REVISION 0x0000 -#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 -#define OMAP24XX_GPIO_IRQSTATUS2 0x0028 -#define OMAP24XX_GPIO_IRQENABLE2 0x002c -#define OMAP24XX_GPIO_IRQENABLE1 0x001c -#define OMAP24XX_GPIO_WAKE_EN 0x0020 -#define OMAP24XX_GPIO_CTRL 0x0030 -#define OMAP24XX_GPIO_OE 0x0034 -#define OMAP24XX_GPIO_DATAIN 0x0038 -#define OMAP24XX_GPIO_DATAOUT 0x003c -#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 -#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 -#define OMAP24XX_GPIO_RISINGDETECT 0x0048 -#define OMAP24XX_GPIO_FALLINGDETECT 0x004c -#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050 -#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054 -#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 -#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 -#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 -#define OMAP24XX_GPIO_SETWKUENA 0x0084 -#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 -#define OMAP24XX_GPIO_SETDATAOUT 0x0094 - -#define OMAP4_GPIO_REVISION 0x0000 -#define OMAP4_GPIO_EOI 0x0020 -#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 -#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 -#define OMAP4_GPIO_IRQSTATUS0 0x002c -#define OMAP4_GPIO_IRQSTATUS1 0x0030 -#define OMAP4_GPIO_IRQSTATUSSET0 0x0034 -#define OMAP4_GPIO_IRQSTATUSSET1 0x0038 -#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c -#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 -#define OMAP4_GPIO_IRQWAKEN0 0x0044 -#define OMAP4_GPIO_IRQWAKEN1 0x0048 -#define OMAP4_GPIO_IRQENABLE1 0x011c -#define OMAP4_GPIO_WAKE_EN 0x0120 -#define OMAP4_GPIO_IRQSTATUS2 0x0128 -#define OMAP4_GPIO_IRQENABLE2 0x012c -#define OMAP4_GPIO_CTRL 0x0130 -#define OMAP4_GPIO_OE 0x0134 -#define OMAP4_GPIO_DATAIN 0x0138 -#define OMAP4_GPIO_DATAOUT 0x013c -#define OMAP4_GPIO_LEVELDETECT0 0x0140 -#define OMAP4_GPIO_LEVELDETECT1 0x0144 -#define OMAP4_GPIO_RISINGDETECT 0x0148 -#define OMAP4_GPIO_FALLINGDETECT 0x014c -#define OMAP4_GPIO_DEBOUNCENABLE 0x0150 -#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 -#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160 -#define OMAP4_GPIO_SETIRQENABLE1 0x0164 -#define OMAP4_GPIO_CLEARWKUENA 0x0180 -#define OMAP4_GPIO_SETWKUENA 0x0184 -#define OMAP4_GPIO_CLEARDATAOUT 0x0190 -#define OMAP4_GPIO_SETDATAOUT 0x0194 - -#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) -#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) - -struct omap_gpio_dev_attr { - int bank_width; /* GPIO bank width */ - bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ -}; - -struct omap_gpio_reg_offs { - u16 revision; - u16 direction; - u16 datain; - u16 dataout; - u16 set_dataout; - u16 clr_dataout; - u16 irqstatus; - u16 irqstatus2; - u16 irqstatus_raw0; - u16 irqstatus_raw1; - u16 irqenable; - u16 irqenable2; - u16 set_irqenable; - u16 clr_irqenable; - u16 debounce; - u16 debounce_en; - u16 ctrl; - u16 wkup_en; - u16 leveldetect0; - u16 leveldetect1; - u16 risingdetect; - u16 fallingdetect; - u16 irqctrl; - u16 edgectrl1; - u16 edgectrl2; - u16 pinctrl; - - bool irqenable_inv; -}; - -struct omap_gpio_platform_data { - int bank_type; - int bank_width; /* GPIO bank width */ - int bank_stride; /* Only needed for omap1 MPUIO */ - bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ - bool loses_context; /* whether the bank would ever lose context */ - bool is_mpuio; /* whether the bank is of type MPUIO */ - u32 non_wakeup_gpios; - - struct omap_gpio_reg_offs *regs; - - /* Return context loss count due to PM states changing */ - int (*get_context_loss_count)(struct device *dev); -}; - -extern void omap2_gpio_prepare_for_idle(int off_mode); -extern void omap2_gpio_resume_after_idle(void); -extern void omap_set_gpio_debounce(int gpio, int enable); -extern void omap_set_gpio_debounce_time(int gpio, int enable); -/*-------------------------------------------------------------------------*/ - -/* - * Wrappers for "new style" GPIO calls, using the new infrastructure - * which lets us plug in FPGA, I2C, and other implementations. - * - * The original OMAP-specific calls should eventually be removed. - */ - -#include <linux/errno.h> -#include <asm-generic/gpio.h> - -#endif diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index f37764a3607..2e6e2597178 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -133,6 +133,25 @@ struct gpmc_timings { u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ }; +struct gpmc_nand_regs { + void __iomem *gpmc_status; + void __iomem *gpmc_nand_command; + void __iomem *gpmc_nand_address; + void __iomem *gpmc_nand_data; + void __iomem *gpmc_prefetch_config1; + void __iomem *gpmc_prefetch_config2; + void __iomem *gpmc_prefetch_control; + void __iomem *gpmc_prefetch_status; + void __iomem *gpmc_ecc_config; + void __iomem *gpmc_ecc_control; + void __iomem *gpmc_ecc_size_config; + void __iomem *gpmc_ecc1_result; + void __iomem *gpmc_bch_result0; +}; + +extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); +extern int gpmc_get_client_irq(unsigned irq_config); + extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps); extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h deleted file mode 100644 index ddbde38e1e3..00000000000 --- a/arch/arm/plat-omap/include/plat/hardware.h +++ /dev/null @@ -1,293 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/hardware.h - * - * Hardware definitions for TI OMAP processors and boards - * - * NOTE: Please put device driver specific defines into a separate header - * file for each driver. - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> - * - * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> - * and Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_HARDWARE_H -#define __ASM_ARCH_OMAP_HARDWARE_H - -#include <asm/sizes.h> -#ifndef __ASSEMBLER__ -#include <asm/types.h> -#include <plat/cpu.h> -#endif -#include <plat/serial.h> - -/* - * --------------------------------------------------------------------------- - * Common definitions for all OMAP processors - * NOTE: Put all processor or board specific parts to the special header - * files. - * --------------------------------------------------------------------------- - */ - -/* - * ---------------------------------------------------------------------------- - * Timers - * ---------------------------------------------------------------------------- - */ -#define OMAP_MPU_TIMER1_BASE (0xfffec500) -#define OMAP_MPU_TIMER2_BASE (0xfffec600) -#define OMAP_MPU_TIMER3_BASE (0xfffec700) -#define MPU_TIMER_FREE (1 << 6) -#define MPU_TIMER_CLOCK_ENABLE (1 << 5) -#define MPU_TIMER_AR (1 << 1) -#define MPU_TIMER_ST (1 << 0) - -/* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define CLKGEN_REG_BASE (0xfffece00) -#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) -#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) -#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) -#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) -#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) -#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) -#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) -#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -#define CK_RATEF 1 -#define CK_IDLEF 2 -#define CK_ENABLEF 4 -#define CK_SELECTF 8 -#define SETARM_IDLE_SHIFT - -/* DPLL control registers */ -#define DPLL_CTL (0xfffecf00) - -/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ -#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) -#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) -#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) -#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) -#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) - -/* - * --------------------------------------------------------------------------- - * UPLD - * --------------------------------------------------------------------------- - */ -#define ULPD_REG_BASE (0xfffe0800) -#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) -#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) -#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) -# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ -# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ -#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) -# define SOFT_UDC_REQ (1 << 4) -# define SOFT_USB_CLK_REQ (1 << 3) -# define SOFT_DPLL_REQ (1 << 0) -#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) -#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) -#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) -#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) -#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) -# define DIS_MMC2_DPLL_REQ (1 << 11) -# define DIS_MMC1_DPLL_REQ (1 << 10) -# define DIS_UART3_DPLL_REQ (1 << 9) -# define DIS_UART2_DPLL_REQ (1 << 8) -# define DIS_UART1_DPLL_REQ (1 << 7) -# define DIS_USB_HOST_DPLL_REQ (1 << 6) -#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) -#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) - -/* - * --------------------------------------------------------------------------- - * Watchdog timer - * --------------------------------------------------------------------------- - */ - -/* Watchdog timer within the OMAP3.2 gigacell */ -#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) -#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) -#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) - -/* - * --------------------------------------------------------------------------- - * Interrupts - * --------------------------------------------------------------------------- - */ -#ifdef CONFIG_ARCH_OMAP1 - -/* - * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c - * or something similar.. -- PFM. - */ - -#define OMAP_IH1_BASE 0xfffecb00 -#define OMAP_IH2_BASE 0xfffe0000 - -#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) -#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) -#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) -#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) -#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) -#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) -#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) - -#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) -#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) -#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) -#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) -#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) -#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) -#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) - -#define IRQ_ITR_REG_OFFSET 0x00 -#define IRQ_MIR_REG_OFFSET 0x04 -#define IRQ_SIR_IRQ_REG_OFFSET 0x10 -#define IRQ_SIR_FIQ_REG_OFFSET 0x14 -#define IRQ_CONTROL_REG_OFFSET 0x18 -#define IRQ_ISR_REG_OFFSET 0x9c -#define IRQ_ILR0_REG_OFFSET 0x1c -#define IRQ_GMR_REG_OFFSET 0xa0 - -#endif - -/* - * ---------------------------------------------------------------------------- - * System control registers - * ---------------------------------------------------------------------------- - */ -#define MOD_CONF_CTRL_0 0xfffe1080 -#define MOD_CONF_CTRL_1 0xfffe1110 - -/* - * ---------------------------------------------------------------------------- - * Pin multiplexing registers - * ---------------------------------------------------------------------------- - */ -#define FUNC_MUX_CTRL_0 0xfffe1000 -#define FUNC_MUX_CTRL_1 0xfffe1004 -#define FUNC_MUX_CTRL_2 0xfffe1008 -#define COMP_MODE_CTRL_0 0xfffe100c -#define FUNC_MUX_CTRL_3 0xfffe1010 -#define FUNC_MUX_CTRL_4 0xfffe1014 -#define FUNC_MUX_CTRL_5 0xfffe1018 -#define FUNC_MUX_CTRL_6 0xfffe101C -#define FUNC_MUX_CTRL_7 0xfffe1020 -#define FUNC_MUX_CTRL_8 0xfffe1024 -#define FUNC_MUX_CTRL_9 0xfffe1028 -#define FUNC_MUX_CTRL_A 0xfffe102C -#define FUNC_MUX_CTRL_B 0xfffe1030 -#define FUNC_MUX_CTRL_C 0xfffe1034 -#define FUNC_MUX_CTRL_D 0xfffe1038 -#define PULL_DWN_CTRL_0 0xfffe1040 -#define PULL_DWN_CTRL_1 0xfffe1044 -#define PULL_DWN_CTRL_2 0xfffe1048 -#define PULL_DWN_CTRL_3 0xfffe104c -#define PULL_DWN_CTRL_4 0xfffe10ac - -/* OMAP-1610 specific multiplexing registers */ -#define FUNC_MUX_CTRL_E 0xfffe1090 -#define FUNC_MUX_CTRL_F 0xfffe1094 -#define FUNC_MUX_CTRL_10 0xfffe1098 -#define FUNC_MUX_CTRL_11 0xfffe109c -#define FUNC_MUX_CTRL_12 0xfffe10a0 -#define PU_PD_SEL_0 0xfffe10b4 -#define PU_PD_SEL_1 0xfffe10b8 -#define PU_PD_SEL_2 0xfffe10bc -#define PU_PD_SEL_3 0xfffe10c0 -#define PU_PD_SEL_4 0xfffe10c4 - -/* Timer32K for 1610 and 1710*/ -#define OMAP_TIMER32K_BASE 0xFFFBC400 - -/* - * --------------------------------------------------------------------------- - * TIPB bus interface - * --------------------------------------------------------------------------- - */ -#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 -#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) -#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 -#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) - -/* - * ---------------------------------------------------------------------------- - * MPUI interface - * ---------------------------------------------------------------------------- - */ -#define MPUI_BASE (0xfffec900) -#define MPUI_CTRL (MPUI_BASE + 0x0) -#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) -#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) -#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) -#define MPUI_STATUS_REG (MPUI_BASE + 0x10) -#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) -#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) -#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) - -/* - * ---------------------------------------------------------------------------- - * LED Pulse Generator - * ---------------------------------------------------------------------------- - */ -#define OMAP_LPG1_BASE 0xfffbd000 -#define OMAP_LPG2_BASE 0xfffbd800 -#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) -#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) -#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) -#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) - -/* - * ---------------------------------------------------------------------------- - * Pulse-Width Light - * ---------------------------------------------------------------------------- - */ -#define OMAP_PWL_BASE 0xfffb5800 -#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) -#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) - -/* - * --------------------------------------------------------------------------- - * Processor specific defines - * --------------------------------------------------------------------------- - */ - -#include <plat/omap7xx.h> -#include <plat/omap1510.h> -#include <plat/omap16xx.h> -#include <plat/omap24xx.h> -#include <plat/omap34xx.h> -#include <plat/omap44xx.h> -#include <plat/ti81xx.h> -#include <plat/am33xx.h> -#include <plat/omap54xx.h> - -#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/plat/irqs-44xx.h b/arch/arm/plat-omap/include/plat/irqs-44xx.h deleted file mode 100644 index 518322c8011..00000000000 --- a/arch/arm/plat-omap/include/plat/irqs-44xx.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * OMAP4 Interrupt lines definitions - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * - * Santosh Shilimkar (santosh.shilimkar@ti.com) - * Benoit Cousson (b-cousson@ti.com) - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H -#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H - -/* OMAP44XX IRQs numbers definitions */ -#define OMAP44XX_IRQ_LOCALTIMER 29 -#define OMAP44XX_IRQ_LOCALWDT 30 - -#define OMAP44XX_IRQ_GIC_START 32 - -#define OMAP44XX_IRQ_PL310 (0 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CTI0 (1 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CTI1 (2 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_ELM (4 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SYS_1N (7 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SECURITY_EVENTS (8 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_L3_DBG (9 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_L3_APP (10 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_PRCM (11 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_0 (12 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_1 (13 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_2 (14 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_3 (15 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP4 (16 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP1 (17 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SR_MCU (18 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SR_CORE (19 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPMC (20 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GFX (21 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP2 (22 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP3 (23 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_ISS_5 (24 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_DISPC (25 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MAIL_U0 (26 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_C2C_SSCM_0 (27 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_TESLA_MMU (28 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO1 (29 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO2 (30 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO3 (31 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO4 (32 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO5 (33 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO6 (34 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_USIM (35 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_WDT3 (36 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT1 (37 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT2 (38 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT3 (39 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT4 (40 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT5 (41 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT6 (42 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT7 (43 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT8 (44 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT9 (45 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT10 (46 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT11 (47 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI4 (48 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SHA1_S (49 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FPKA_SINTREQUEST_S (50 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SHA1_P (51 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_RNG (52 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_DSI1 (53 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C1 (56 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C2 (57 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HDQ (58 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC5 (59 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C3 (61 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C4 (62 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES2_S (63 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES2_P (64 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI1 (65 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI2 (66 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HSI_P1 (67 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HSI_P2 (68 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FDIF_3 (69 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART4 (70 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HSI_DMA (71 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART1 (72 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART2 (73 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART3 (74 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_PBIAS (75 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_OHCI (76 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_EHCI (77 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_TLL (78 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES1_S (79 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_WDT2 (80 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DES_S (81 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DES_P (82 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC1 (83 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_DSI2 (84 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES1_P (85 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC2 (86 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MPU_ICR (87 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_C2C_SSCM_1 (88 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FSUSB (89 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FSUSB_SMI (90 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI3 (91 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HS_USB_MC_N (92 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HS_USB_DMA_N (93 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC3 (94 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT12 (95 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC4 (96 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SLIMBUS1 (97 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SLIMBUS2 (98 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_ABE (99 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DUCATI_MMU (100 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_HDMI (101 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SR_IVA (102 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_1 (103 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_0 (104 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_IVA_HD_POMBINTRPEND_0 (107 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCASP1_AR (108 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCASP1_AX (109 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_EMIF4_1 (110 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_EMIF4_2 (111 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCPDM (112 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DMM (113 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DMIC (114 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_0 (115 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_1 (116 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_2 (117 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_3 (118 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SYS_2N (119 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_KBD_CTL (120 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UNIPRO1 (124 + OMAP44XX_IRQ_GIC_START) - -#endif diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h deleted file mode 100644 index 37bbbbb981b..00000000000 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ /dev/null @@ -1,453 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/irqs.h - * - * Copyright (C) Greg Lonnon 2001 - * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 - * are different. - */ - -#ifndef __ASM_ARCH_OMAP15XX_IRQS_H -#define __ASM_ARCH_OMAP15XX_IRQS_H - -/* All OMAP4 specific defines are moved to irqs-44xx.h */ -#include "irqs-44xx.h" - -/* - * IRQ numbers for interrupt handler 1 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - * - */ -#define INT_CAMERA 1 -#define INT_FIQ 3 -#define INT_RTDX 6 -#define INT_DSP_MMU_ABORT 7 -#define INT_HOST 8 -#define INT_ABORT 9 -#define INT_BRIDGE_PRIV 13 -#define INT_GPIO_BANK1 14 -#define INT_UART3 15 -#define INT_TIMER3 16 -#define INT_DMA_CH0_6 19 -#define INT_DMA_CH1_7 20 -#define INT_DMA_CH2_8 21 -#define INT_DMA_CH3 22 -#define INT_DMA_CH4 23 -#define INT_DMA_CH5 24 -#define INT_DMA_LCD 25 -#define INT_TIMER1 26 -#define INT_WD_TIMER 27 -#define INT_BRIDGE_PUB 28 -#define INT_TIMER2 30 -#define INT_LCD_CTRL 31 - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1510_IH2_IRQ 0 -#define INT_1510_RES2 2 -#define INT_1510_SPI_TX 4 -#define INT_1510_SPI_RX 5 -#define INT_1510_DSP_MAILBOX1 10 -#define INT_1510_DSP_MAILBOX2 11 -#define INT_1510_RES12 12 -#define INT_1510_LB_MMU 17 -#define INT_1510_RES18 18 -#define INT_1510_LOCAL_BUS 29 - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ -#define INT_1610_IH2_FIQ 2 -#define INT_1610_McBSP2_TX 4 -#define INT_1610_McBSP2_RX 5 -#define INT_1610_DSP_MAILBOX1 10 -#define INT_1610_DSP_MAILBOX2 11 -#define INT_1610_LCD_LINE 12 -#define INT_1610_GPTIMER1 17 -#define INT_1610_GPTIMER2 18 -#define INT_1610_SSR_FIFO_0 29 - -/* - * OMAP-7xx specific IRQ numbers for interrupt handler 1 - */ -#define INT_7XX_IH2_FIQ 0 -#define INT_7XX_IH2_IRQ 1 -#define INT_7XX_USB_NON_ISO 2 -#define INT_7XX_USB_ISO 3 -#define INT_7XX_ICR 4 -#define INT_7XX_EAC 5 -#define INT_7XX_GPIO_BANK1 6 -#define INT_7XX_GPIO_BANK2 7 -#define INT_7XX_GPIO_BANK3 8 -#define INT_7XX_McBSP2TX 10 -#define INT_7XX_McBSP2RX 11 -#define INT_7XX_McBSP2RX_OVF 12 -#define INT_7XX_LCD_LINE 14 -#define INT_7XX_GSM_PROTECT 15 -#define INT_7XX_TIMER3 16 -#define INT_7XX_GPIO_BANK5 17 -#define INT_7XX_GPIO_BANK6 18 -#define INT_7XX_SPGIO_WR 29 - -/* - * IRQ numbers for interrupt handler 2 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - */ -#define IH2_BASE 32 - -#define INT_KEYBOARD (1 + IH2_BASE) -#define INT_uWireTX (2 + IH2_BASE) -#define INT_uWireRX (3 + IH2_BASE) -#define INT_I2C (4 + IH2_BASE) -#define INT_MPUIO (5 + IH2_BASE) -#define INT_USB_HHC_1 (6 + IH2_BASE) -#define INT_McBSP3TX (10 + IH2_BASE) -#define INT_McBSP3RX (11 + IH2_BASE) -#define INT_McBSP1TX (12 + IH2_BASE) -#define INT_McBSP1RX (13 + IH2_BASE) -#define INT_UART1 (14 + IH2_BASE) -#define INT_UART2 (15 + IH2_BASE) -#define INT_BT_MCSI1TX (16 + IH2_BASE) -#define INT_BT_MCSI1RX (17 + IH2_BASE) -#define INT_SOSSI_MATCH (19 + IH2_BASE) -#define INT_USB_W2FC (20 + IH2_BASE) -#define INT_1WIRE (21 + IH2_BASE) -#define INT_OS_TIMER (22 + IH2_BASE) -#define INT_MMC (23 + IH2_BASE) -#define INT_GAUGE_32K (24 + IH2_BASE) -#define INT_RTC_TIMER (25 + IH2_BASE) -#define INT_RTC_ALARM (26 + IH2_BASE) -#define INT_MEM_STICK (27 + IH2_BASE) - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1510_DSP_MMU (28 + IH2_BASE) -#define INT_1510_COM_SPI_RO (31 + IH2_BASE) - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1610_FAC (0 + IH2_BASE) -#define INT_1610_USB_HHC_2 (7 + IH2_BASE) -#define INT_1610_USB_OTG (8 + IH2_BASE) -#define INT_1610_SoSSI (9 + IH2_BASE) -#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) -#define INT_1610_DSP_MMU (28 + IH2_BASE) -#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) -#define INT_1610_STI (32 + IH2_BASE) -#define INT_1610_STI_WAKEUP (33 + IH2_BASE) -#define INT_1610_GPTIMER3 (34 + IH2_BASE) -#define INT_1610_GPTIMER4 (35 + IH2_BASE) -#define INT_1610_GPTIMER5 (36 + IH2_BASE) -#define INT_1610_GPTIMER6 (37 + IH2_BASE) -#define INT_1610_GPTIMER7 (38 + IH2_BASE) -#define INT_1610_GPTIMER8 (39 + IH2_BASE) -#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) -#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) -#define INT_1610_MMC2 (42 + IH2_BASE) -#define INT_1610_CF (43 + IH2_BASE) -#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) -#define INT_1610_SPI (49 + IH2_BASE) -#define INT_1610_DMA_CH6 (53 + IH2_BASE) -#define INT_1610_DMA_CH7 (54 + IH2_BASE) -#define INT_1610_DMA_CH8 (55 + IH2_BASE) -#define INT_1610_DMA_CH9 (56 + IH2_BASE) -#define INT_1610_DMA_CH10 (57 + IH2_BASE) -#define INT_1610_DMA_CH11 (58 + IH2_BASE) -#define INT_1610_DMA_CH12 (59 + IH2_BASE) -#define INT_1610_DMA_CH13 (60 + IH2_BASE) -#define INT_1610_DMA_CH14 (61 + IH2_BASE) -#define INT_1610_DMA_CH15 (62 + IH2_BASE) -#define INT_1610_NAND (63 + IH2_BASE) -#define INT_1610_SHA1MD5 (91 + IH2_BASE) - -/* - * OMAP-7xx specific IRQ numbers for interrupt handler 2 - */ -#define INT_7XX_HW_ERRORS (0 + IH2_BASE) -#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_7XX_CFCD (2 + IH2_BASE) -#define INT_7XX_CFIREQ (3 + IH2_BASE) -#define INT_7XX_I2C (4 + IH2_BASE) -#define INT_7XX_PCC (5 + IH2_BASE) -#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) -#define INT_7XX_SYREN_SPI (8 + IH2_BASE) -#define INT_7XX_VLYNQ (9 + IH2_BASE) -#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) -#define INT_7XX_McBSP1TX (11 + IH2_BASE) -#define INT_7XX_McBSP1RX (12 + IH2_BASE) -#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) -#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) -#define INT_7XX_MCSI (16 + IH2_BASE) -#define INT_7XX_uWireTX (17 + IH2_BASE) -#define INT_7XX_uWireRX (18 + IH2_BASE) -#define INT_7XX_SMC_CD (19 + IH2_BASE) -#define INT_7XX_SMC_IREQ (20 + IH2_BASE) -#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) -#define INT_7XX_TIMER32K (22 + IH2_BASE) -#define INT_7XX_MMC_SDIO (23 + IH2_BASE) -#define INT_7XX_UPLD (24 + IH2_BASE) -#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) -#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) -#define INT_7XX_USB_GENI (29 + IH2_BASE) -#define INT_7XX_USB_OTG (30 + IH2_BASE) -#define INT_7XX_CAMERA_IF (31 + IH2_BASE) -#define INT_7XX_RNG (32 + IH2_BASE) -#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) -#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) -#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) -#define INT_7XX_RNG_IDLE (38 + IH2_BASE) -#define INT_7XX_MPUIO (39 + IH2_BASE) -#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) -#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_7XX_DMA_CH6 (53 + IH2_BASE) -#define INT_7XX_DMA_CH7 (54 + IH2_BASE) -#define INT_7XX_DMA_CH8 (55 + IH2_BASE) -#define INT_7XX_DMA_CH9 (56 + IH2_BASE) -#define INT_7XX_DMA_CH10 (57 + IH2_BASE) -#define INT_7XX_DMA_CH11 (58 + IH2_BASE) -#define INT_7XX_DMA_CH12 (59 + IH2_BASE) -#define INT_7XX_DMA_CH13 (60 + IH2_BASE) -#define INT_7XX_DMA_CH14 (61 + IH2_BASE) -#define INT_7XX_DMA_CH15 (62 + IH2_BASE) -#define INT_7XX_NAND (63 + IH2_BASE) - -#define INT_24XX_SYS_NIRQ 7 -#define INT_24XX_SDMA_IRQ0 12 -#define INT_24XX_SDMA_IRQ1 13 -#define INT_24XX_SDMA_IRQ2 14 -#define INT_24XX_SDMA_IRQ3 15 -#define INT_24XX_CAM_IRQ 24 -#define INT_24XX_DSS_IRQ 25 -#define INT_24XX_MAIL_U0_MPU 26 -#define INT_24XX_DSP_UMA 27 -#define INT_24XX_DSP_MMU 28 -#define INT_24XX_GPIO_BANK1 29 -#define INT_24XX_GPIO_BANK2 30 -#define INT_24XX_GPIO_BANK3 31 -#define INT_24XX_GPIO_BANK4 32 -#define INT_24XX_GPIO_BANK5 33 -#define INT_24XX_MAIL_U3_MPU 34 -#define INT_24XX_GPTIMER1 37 -#define INT_24XX_GPTIMER2 38 -#define INT_24XX_GPTIMER3 39 -#define INT_24XX_GPTIMER4 40 -#define INT_24XX_GPTIMER5 41 -#define INT_24XX_GPTIMER6 42 -#define INT_24XX_GPTIMER7 43 -#define INT_24XX_GPTIMER8 44 -#define INT_24XX_GPTIMER9 45 -#define INT_24XX_GPTIMER10 46 -#define INT_24XX_GPTIMER11 47 -#define INT_24XX_GPTIMER12 48 -#define INT_24XX_SHA1MD5 51 -#define INT_24XX_MCBSP4_IRQ_TX 54 -#define INT_24XX_MCBSP4_IRQ_RX 55 -#define INT_24XX_I2C1_IRQ 56 -#define INT_24XX_I2C2_IRQ 57 -#define INT_24XX_HDQ_IRQ 58 -#define INT_24XX_MCBSP1_IRQ_TX 59 -#define INT_24XX_MCBSP1_IRQ_RX 60 -#define INT_24XX_MCBSP2_IRQ_TX 62 -#define INT_24XX_MCBSP2_IRQ_RX 63 -#define INT_24XX_SPI1_IRQ 65 -#define INT_24XX_SPI2_IRQ 66 -#define INT_24XX_UART1_IRQ 72 -#define INT_24XX_UART2_IRQ 73 -#define INT_24XX_UART3_IRQ 74 -#define INT_24XX_USB_IRQ_GEN 75 -#define INT_24XX_USB_IRQ_NISO 76 -#define INT_24XX_USB_IRQ_ISO 77 -#define INT_24XX_USB_IRQ_HGEN 78 -#define INT_24XX_USB_IRQ_HSOF 79 -#define INT_24XX_USB_IRQ_OTG 80 -#define INT_24XX_MCBSP5_IRQ_TX 81 -#define INT_24XX_MCBSP5_IRQ_RX 82 -#define INT_24XX_MMC_IRQ 83 -#define INT_24XX_MMC2_IRQ 86 -#define INT_24XX_MCBSP3_IRQ_TX 89 -#define INT_24XX_MCBSP3_IRQ_RX 90 -#define INT_24XX_SPI3_IRQ 91 - -#define INT_243X_MCBSP2_IRQ 16 -#define INT_243X_MCBSP3_IRQ 17 -#define INT_243X_MCBSP4_IRQ 18 -#define INT_243X_MCBSP5_IRQ 19 -#define INT_243X_MCBSP1_IRQ 64 -#define INT_243X_HS_USB_MC 92 -#define INT_243X_HS_USB_DMA 93 -#define INT_243X_CARKIT_IRQ 94 - -#define INT_34XX_BENCH_MPU_EMUL 3 -#define INT_34XX_ST_MCBSP2_IRQ 4 -#define INT_34XX_ST_MCBSP3_IRQ 5 -#define INT_34XX_SSM_ABORT_IRQ 6 -#define INT_34XX_SYS_NIRQ 7 -#define INT_34XX_D2D_FW_IRQ 8 -#define INT_34XX_L3_DBG_IRQ 9 -#define INT_34XX_L3_APP_IRQ 10 -#define INT_34XX_PRCM_MPU_IRQ 11 -#define INT_34XX_MCBSP1_IRQ 16 -#define INT_34XX_MCBSP2_IRQ 17 -#define INT_34XX_GPMC_IRQ 20 -#define INT_34XX_MCBSP3_IRQ 22 -#define INT_34XX_MCBSP4_IRQ 23 -#define INT_34XX_CAM_IRQ 24 -#define INT_34XX_MCBSP5_IRQ 27 -#define INT_34XX_GPIO_BANK1 29 -#define INT_34XX_GPIO_BANK2 30 -#define INT_34XX_GPIO_BANK3 31 -#define INT_34XX_GPIO_BANK4 32 -#define INT_34XX_GPIO_BANK5 33 -#define INT_34XX_GPIO_BANK6 34 -#define INT_34XX_USIM_IRQ 35 -#define INT_34XX_WDT3_IRQ 36 -#define INT_34XX_SPI4_IRQ 48 -#define INT_34XX_SHA1MD52_IRQ 49 -#define INT_34XX_FPKA_READY_IRQ 50 -#define INT_34XX_SHA1MD51_IRQ 51 -#define INT_34XX_RNG_IRQ 52 -#define INT_34XX_I2C3_IRQ 61 -#define INT_34XX_FPKA_ERROR_IRQ 64 -#define INT_34XX_PBIAS_IRQ 75 -#define INT_34XX_OHCI_IRQ 76 -#define INT_34XX_EHCI_IRQ 77 -#define INT_34XX_TLL_IRQ 78 -#define INT_34XX_PARTHASH_IRQ 79 -#define INT_34XX_MMC3_IRQ 94 -#define INT_34XX_GPT12_IRQ 95 - -#define INT_36XX_UART4_IRQ 80 - -#define INT_35XX_HECC0_IRQ 24 -#define INT_35XX_HECC1_IRQ 28 -#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67 -#define INT_35XX_EMAC_C0_RX_PULSE_IRQ 68 -#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69 -#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70 -#define INT_35XX_USBOTG_IRQ 71 -#define INT_35XX_UART4_IRQ 84 -#define INT_35XX_CCDC_VD0_IRQ 88 -#define INT_35XX_CCDC_VD1_IRQ 92 -#define INT_35XX_CCDC_VD2_IRQ 93 - -/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and - * 16 MPUIO lines */ -#define OMAP_MAX_GPIO_LINES 192 -#define IH_GPIO_BASE (128 + IH2_BASE) -#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) -#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) - -/* External FPGA handles interrupts on Innovator boards */ -#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) -#ifdef CONFIG_MACH_OMAP_INNOVATOR -#define OMAP_FPGA_NR_IRQS 24 -#else -#define OMAP_FPGA_NR_IRQS 0 -#endif -#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) - -/* External TWL4030 can handle interrupts on 2430 and 34xx boards */ -#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END) -#ifdef CONFIG_TWL4030_CORE -#define TWL4030_BASE_NR_IRQS 8 -#define TWL4030_PWR_NR_IRQS 8 -#else -#define TWL4030_BASE_NR_IRQS 0 -#define TWL4030_PWR_NR_IRQS 0 -#endif -#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS) -#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END -#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS) - -/* External TWL4030 gpio interrupts are optional */ -#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END -#ifdef CONFIG_GPIO_TWL4030 -#define TWL4030_GPIO_NR_IRQS 18 -#else -#define TWL4030_GPIO_NR_IRQS 0 -#endif -#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS) - -#define TWL6030_IRQ_BASE (OMAP_FPGA_IRQ_END) -#ifdef CONFIG_TWL4030_CORE -#define TWL6030_BASE_NR_IRQS 20 -#else -#define TWL6030_BASE_NR_IRQS 0 -#endif -#define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS) - -#define TWL6040_CODEC_IRQ_BASE TWL6030_IRQ_END -#ifdef CONFIG_TWL6040_CODEC -#define TWL6040_CODEC_NR_IRQS 6 -#else -#define TWL6040_CODEC_NR_IRQS 0 -#endif -#define TWL6040_CODEC_IRQ_END (TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS) - -/* Total number of interrupts depends on the enabled blocks above */ -#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END) -#define TWL_IRQ_END TWL4030_GPIO_IRQ_END -#else -#define TWL_IRQ_END TWL6040_CODEC_IRQ_END -#endif - -/* GPMC related */ -#define OMAP_GPMC_IRQ_BASE (TWL_IRQ_END) -#define OMAP_GPMC_NR_IRQS 8 -#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) - -/* PRCM IRQ handler */ -#ifdef CONFIG_ARCH_OMAP2PLUS -#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END) -#define OMAP_PRCM_NR_IRQS 64 -#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS) -#else -#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END -#endif - -#define NR_IRQS OMAP_PRCM_IRQ_END - -#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) - -#define INTCPS_NR_MIR_REGS 3 -#define INTCPS_NR_IRQS 96 - -#include <mach/hardware.h> - -#ifdef CONFIG_FIQ -#define FIQ_START 1024 -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index eb3e4d55534..8b4e4f2da2f 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -15,7 +15,6 @@ #include <linux/device.h> #include <linux/mmc/host.h> -#include <plat/board.h> #include <plat/omap_hwmod.h> #define OMAP15XX_NR_MMC 1 diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index 045e320f106..324d31b1485 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -108,4 +108,13 @@ # endif #endif +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + #endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h index 67fc5060183..1a68c1e5fe5 100644 --- a/arch/arm/plat-omap/include/plat/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h @@ -24,11 +24,10 @@ struct omap_nand_platform_data { struct gpmc_timings *gpmc_t; int nr_parts; bool dev_ready; - int gpmc_irq; enum nand_io xfer_type; - unsigned long phys_base; int devsize; enum omap_ecc ecc_opt; + struct gpmc_nand_regs reg; }; /* minimum size for IO mapping */ diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 1a52725ffcf..a531149823b 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -18,7 +18,7 @@ #define __OMAP_SERIAL_H__ #include <linux/serial_core.h> -#include <linux/platform_device.h> +#include <linux/device.h> #include <linux/pm_qos.h> #include <plat/mux.h> @@ -42,10 +42,10 @@ #define OMAP_UART_WER_MOD_WKUP 0X7F /* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x04 +#define OMAP_UART_SW_TX 0x8 /* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x04 +#define OMAP_UART_SW_RX 0x2 #define OMAP_UART_SYSC_RESET 0X07 #define OMAP_UART_TCR_TRIG 0X0F @@ -69,11 +69,14 @@ struct omap_uart_port_info { unsigned int dma_rx_timeout; unsigned int autosuspend_timeout; unsigned int dma_rx_poll_rate; + int DTR_gpio; + int DTR_inverted; + int DTR_present; int (*get_context_loss_count)(struct device *); - void (*set_forceidle)(struct platform_device *); - void (*set_noidle)(struct platform_device *); - void (*enable_wakeup)(struct platform_device *, bool); + void (*set_forceidle)(struct device *); + void (*set_noidle)(struct device *); + void (*enable_wakeup)(struct device *, bool); }; struct uart_omap_dma { @@ -102,39 +105,4 @@ struct uart_omap_dma { unsigned int rx_timeout; }; -struct uart_omap_port { - struct uart_port port; - struct uart_omap_dma uart_dma; - struct platform_device *pdev; - - unsigned char ier; - unsigned char lcr; - unsigned char mcr; - unsigned char fcr; - unsigned char efr; - unsigned char dll; - unsigned char dlh; - unsigned char mdr1; - unsigned char scr; - - int use_dma; - /* - * Some bits in registers are cleared on a read, so they must - * be saved whenever the register is read but the bits will not - * be immediately processed. - */ - unsigned int lsr_break_flag; - unsigned char msr_saved_flags; - char name[20]; - unsigned long port_activity; - u32 context_loss_cnt; - u32 errata; - u8 wakeups_enabled; - - struct pm_qos_request pm_qos_request; - u32 latency; - u32 calc_latency; - struct work_struct qos_work; -}; - #endif /* __OMAP_SERIAL_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h index 8ad0a377a54..20de0d5a7e7 100644 --- a/arch/arm/plat-omap/include/plat/omap4-keypad.h +++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h @@ -1,6 +1,8 @@ #ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H #define ARCH_ARM_PLAT_OMAP4_KEYPAD_H +struct omap_board_data; + extern int omap4_keyboard_init(struct omap4_keypad_platform_data *, struct omap_board_data *); #endif diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index b8d19a13678..7f7b112accc 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -110,7 +110,7 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ AM33XXUART##p) -static inline void __arch_decomp_setup(unsigned long arch_id) +static inline void arch_decomp_setup(void) { int port = 0; @@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } while (0); } -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - /* * nothing to do */ diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 548a4c8d63d..bd20588c356 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -5,7 +5,6 @@ #include <linux/io.h> #include <linux/usb/musb.h> -#include <plat/board.h> #define OMAP3_HS_USB_PORTS 3 diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 766181cb5c9..d861aa73299 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -26,7 +26,6 @@ #include <asm/mach/map.h> #include <plat/sram.h> -#include <plat/board.h> #include <plat/cpu.h> #include "sram.h" diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index d245a87dc01..b8b747a9d36 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = { void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge00_shared_data, orion_ge00_resources, irq, &orion_ge00_shared, eth_data, &orion_ge00); @@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = { void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge01_shared_data, orion_ge01_resources, irq, &orion_ge01_shared, eth_data, &orion_ge01); diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e00fdb21360..ae2377ef63e 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase, void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 28f898f7538..db98e7021f0 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) * when necessary. */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 74e31ce3553..fc49f3dabd7 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -32,6 +32,8 @@ #include <linux/platform_data/s3c-hsudc.h> #include <linux/platform_data/s3c-hsotg.h> +#include <media/s5p_hdmi.h> + #include <asm/irq.h> #include <asm/pmu.h> #include <asm/mach/arch.h> @@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) if (!pd) { pd = &default_i2c_data; - if (soc_is_exynos4210()) + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) pd->bus_num = 8; else if (soc_is_s5pv210()) pd->bus_num = 3; @@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s5p_device_i2c_hdmiphy); } + +struct s5p_hdmi_platform_data s5p_hdmi_def_platdata; + +void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus) +{ + struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; + + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) + pd->hdmiphy_bus = 8; + else if (soc_is_s5pv210()) + pd->hdmiphy_bus = 3; + else + pd->hdmiphy_bus = 0; + + pd->hdmiphy_info = hdmiphy_info; + pd->mhl_info = mhl_info; + pd->mhl_bus = mhl_bus; + + s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data), + &s5p_device_hdmi); +} + #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */ /* I2S */ diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h new file mode 100644 index 00000000000..331d046ac2c --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/hdmi.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_SAMSUNG_HDMI_H +#define __PLAT_SAMSUNG_HDMI_H __FILE__ + +extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus); + +#endif /* __PLAT_SAMSUNG_HDMI_H */ diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 64ab65f0fdb..15070284343 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot; #ifdef CONFIG_SAMSUNG_PM_DEBUG -struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; +static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) { |