diff options
Diffstat (limited to 'arch/arm')
61 files changed, 365 insertions, 3529 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7a13c2cd7a8..49fdc432512 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2087,53 +2087,6 @@ menu "CPU Power Management" if ARCH_HAS_CPUFREQ source "drivers/cpufreq/Kconfig" - -config CPU_FREQ_S3C - bool - help - Internal configuration node for common cpufreq on Samsung SoC - -config CPU_FREQ_S3C24XX - bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" - depends on ARCH_S3C24XX && CPU_FREQ - select CPU_FREQ_S3C - help - This enables the CPUfreq driver for the Samsung S3C24XX family - of CPUs. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say N. - -config CPU_FREQ_S3C24XX_PLL - bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" - depends on CPU_FREQ_S3C24XX - help - Compile in support for changing the PLL frequency from the - S3C24XX series CPUfreq driver. The PLL takes time to settle - after a frequency change, so by default it is not enabled. - - This also means that the PLL tables for the selected CPU(s) will - be built which may increase the size of the kernel image. - -config CPU_FREQ_S3C24XX_DEBUG - bool "Debug CPUfreq Samsung driver core" - depends on CPU_FREQ_S3C24XX - help - Enable s3c_freq_dbg for the Samsung S3C CPUfreq core - -config CPU_FREQ_S3C24XX_IODEBUG - bool "Debug CPUfreq Samsung driver IO timing" - depends on CPU_FREQ_S3C24XX - help - Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core - -config CPU_FREQ_S3C24XX_DEBUGFS - bool "Export debugfs for CPUFreq" - depends on CPU_FREQ_S3C24XX && DEBUG_FS - help - Export status information via debugfs. - endif source "drivers/cpuidle/Kconfig" diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index a082f0ba1dd..a1529455f08 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -360,6 +360,11 @@ interrupt-controller; #interrupt-cells = <2>; + ab8500_gpio: ab8500-gpio { + gpio-controller; + #gpio-cells = <2>; + }; + ab8500-rtc { compatible = "stericsson,ab8500-rtc"; interrupts = <17 IRQ_TYPE_LEVEL_HIGH diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index bed40ee2e4f..3f94fe8e370 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -19,7 +19,7 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 08609b8bdaf..382d8c7e290 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4210"; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 91332b72acf..9c01b718d29 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung smdkv310 evaluation board based on Exynos4210"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 9a14484c7bb..94eebffe304 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung Trats based on Exynos4210"; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 345cdb51dcb..889cdada1ce 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung Universal C210 based on Exynos4210 rev0"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index d4f8067e89b..b7f358a93bc 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -19,8 +19,8 @@ * published by the Free Software Foundation. */ -/include/ "exynos4.dtsi" -/include/ "exynos4210-pinctrl.dtsi" +#include "exynos4.dtsi" +#include "exynos4210-pinctrl.dtsi" / { compatible = "samsung,exynos4210"; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index c0f60f49cea..6f34d7f6ba7 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -17,7 +17,7 @@ * published by the Free Software Foundation. */ -/include/ "exynos4x12.dtsi" +#include "exynos4x12.dtsi" / { compatible = "samsung,exynos4212"; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 867d9452619..46c678ee119 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -12,7 +12,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Hardkernel ODROID-X board based on Exynos4412"; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index ca73c42f77e..7993641cb32 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4412"; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index a8ba195c41a..ad316a1ee9e 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Samsung SMDK evaluation board based on Exynos4412"; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 270b389e0a1..e743e677a9e 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -17,7 +17,7 @@ * published by the Free Software Foundation. */ -/include/ "exynos4x12.dtsi" +#include "exynos4x12.dtsi" / { compatible = "samsung,exynos4412"; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 35cb2099d55..01da194ba32 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -17,8 +17,8 @@ * published by the Free Software Foundation. */ -/include/ "exynos4.dtsi" -/include/ "exynos4x12-pinctrl.dtsi" +#include "exynos4.dtsi" +#include "exynos4x12-pinctrl.dtsi" / { aliases { diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index c6db281a343..abc7272c7af 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" +#include "exynos5250.dtsi" / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 1e21200b6d8..35a66dee401 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" +#include "exynos5250.dtsi" / { model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 05244f150dd..e79331dba12 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -9,8 +9,8 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" -/include/ "cros5250-common.dtsi" +#include "exynos5250.dtsi" +#include "cros5250-common.dtsi" / { model = "Google Snow"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 54a35e64c78..964158c1844 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -17,8 +17,10 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" -/include/ "exynos5250-pinctrl.dtsi" +#include "skeleton.dtsi" +#include "exynos5250-pinctrl.dtsi" + +#include <dt-bindings/clk/exynos-audss-clk.h> / { compatible = "samsung,exynos5250"; @@ -72,6 +74,12 @@ #clock-cells = <1>; }; + clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + }; + gic:interrupt-controller@10481000 { compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -451,6 +459,10 @@ &pdma0 9 &pdma0 8>; dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; samsung,supports-6ch; samsung,supports-rstclr; samsung,supports-secdai; @@ -465,6 +477,8 @@ dmas = <&pdma1 12 &pdma1 11>; dma-names = "tx", "rx"; + clocks = <&clock 307>, <&clock 157>; + clock-names = "iis", "i2s_opclk0"; pinctrl-names = "default"; pinctrl-0 = <&i2s1_bus>; }; @@ -475,6 +489,8 @@ dmas = <&pdma0 12 &pdma0 11>; dma-names = "tx", "rx"; + clocks = <&clock 308>, <&clock 158>; + clock-names = "iis", "i2s_opclk0"; pinctrl-names = "default"; pinctrl-0 = <&i2s2_bus>; }; diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts index f722a0263ac..5b22508050d 100644 --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5440.dtsi" +#include "exynos5440.dtsi" / { model = "SAMSUNG SD5v1 board based on EXYNOS5440"; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index ba88cfd2486..ede772741f8 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5440.dtsi" +#include "exynos5440.dtsi" / { model = "SAMSUNG SSDK5440 board based on EXYNOS5440"; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index bfcb907b7e3..ff7f5d85584 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -9,7 +9,7 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "samsung,exynos5440"; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index c4a1c0a9772..e2249bcc3e6 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -106,7 +106,6 @@ nand-bus-width = <8>; ti,nand-ecc-opt = "sw"; - gpmc,device-nand; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <36>; gpmc,cs-wr-off-ns = <36>; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index ad1dd09c10e..59594cf1599 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "s3c2416.dtsi" +#include "s3c2416.dtsi" / { model = "SMDK2416"; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 6809324934a..e6555bdd81b 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -8,8 +8,8 @@ * published by the Free Software Foundation. */ -/include/ "s3c24xx.dtsi" -/include/ "s3c2416-pinctrl.dtsi" +#include "s3c24xx.dtsi" +#include "s3c2416-pinctrl.dtsi" / { model = "Samsung S3C2416 SoC"; diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi index cab46ff5fb4..2d1d7dc9418 100644 --- a/arch/arm/boot/dts/s3c24xx.dtsi +++ b/arch/arm/boot/dts/s3c24xx.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "samsung,s3c24xx"; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index fb9dce529da..49824be6684 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -22,12 +22,13 @@ en_3v3_reg: en_3v3 { compatible = "regulator-fixed"; - regulator-name = "en-3v3-fixed-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpios = <&gpio0 26 0x4>; // 26 - startup-delay-us = <5000>; - enable-active-high; + regulator-name = "en-3v3-fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */ + gpio = <&ab8500_gpio 25 0x4>; + startup-delay-us = <5000>; + enable-active-high; }; gpio_keys { diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 9940f7b4e43..d74edbad18f 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -26,7 +26,8 @@ CONFIG_ARCH_OMAP=y CONFIG_ARCH_OMAP1=y CONFIG_OMAP_RESET_CLOCKS=y # CONFIG_OMAP_MUX is not set -CONFIG_OMAP_MBOX_FWK=y +CONFIG_MAILBOX=y +CONFIG_OMAP1_MBOX=y CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_DM_TIMER=y CONFIG_ARCH_OMAP730=y diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 222d58c0ae7..3889b6cd211 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -19,10 +19,6 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o # Power Management obj-$(CONFIG_PM) += pm.o sleep.o -# DSP -obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o -mailbox_mach-objs := mailbox.o - i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c deleted file mode 100644 index efc8f207f6f..00000000000 --- a/arch/arm/mach-omap1/mailbox.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Mailbox reservation modules for OMAP1 - * - * Copyright (C) 2006-2009 Nokia Corporation - * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <plat/mailbox.h> - -#define MAILBOX_ARM2DSP1 0x00 -#define MAILBOX_ARM2DSP1b 0x04 -#define MAILBOX_DSP2ARM1 0x08 -#define MAILBOX_DSP2ARM1b 0x0c -#define MAILBOX_DSP2ARM2 0x10 -#define MAILBOX_DSP2ARM2b 0x14 -#define MAILBOX_ARM2DSP1_Flag 0x18 -#define MAILBOX_DSP2ARM1_Flag 0x1c -#define MAILBOX_DSP2ARM2_Flag 0x20 - -static void __iomem *mbox_base; - -struct omap_mbox1_fifo { - unsigned long cmd; - unsigned long data; - unsigned long flag; -}; - -struct omap_mbox1_priv { - struct omap_mbox1_fifo tx_fifo; - struct omap_mbox1_fifo rx_fifo; -}; - -static inline int mbox_read_reg(size_t ofs) -{ - return __raw_readw(mbox_base + ofs); -} - -static inline void mbox_write_reg(u32 val, size_t ofs) -{ - __raw_writew(val, mbox_base + ofs); -} - -/* msg */ -static mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox) -{ - struct omap_mbox1_fifo *fifo = - &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; - mbox_msg_t msg; - - msg = mbox_read_reg(fifo->data); - msg |= ((mbox_msg_t) mbox_read_reg(fifo->cmd)) << 16; - - return msg; -} - -static void -omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) -{ - struct omap_mbox1_fifo *fifo = - &((struct omap_mbox1_priv *)mbox->priv)->tx_fifo; - - mbox_write_reg(msg & 0xffff, fifo->data); - mbox_write_reg(msg >> 16, fifo->cmd); -} - -static int omap1_mbox_fifo_empty(struct omap_mbox *mbox) -{ - return 0; -} - -static int omap1_mbox_fifo_full(struct omap_mbox *mbox) -{ - struct omap_mbox1_fifo *fifo = - &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; - - return mbox_read_reg(fifo->flag); -} - -/* irq */ -static void -omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) -{ - if (irq == IRQ_RX) - enable_irq(mbox->irq); -} - -static void -omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) -{ - if (irq == IRQ_RX) - disable_irq(mbox->irq); -} - -static int -omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) -{ - if (irq == IRQ_TX) - return 0; - return 1; -} - -static struct omap_mbox_ops omap1_mbox_ops = { - .type = OMAP_MBOX_TYPE1, - .fifo_read = omap1_mbox_fifo_read, - .fifo_write = omap1_mbox_fifo_write, - .fifo_empty = omap1_mbox_fifo_empty, - .fifo_full = omap1_mbox_fifo_full, - .enable_irq = omap1_mbox_enable_irq, - .disable_irq = omap1_mbox_disable_irq, - .is_irq = omap1_mbox_is_irq, -}; - -/* FIXME: the following struct should be created automatically by the user id */ - -/* DSP */ -static struct omap_mbox1_priv omap1_mbox_dsp_priv = { - .tx_fifo = { - .cmd = MAILBOX_ARM2DSP1b, - .data = MAILBOX_ARM2DSP1, - .flag = MAILBOX_ARM2DSP1_Flag, - }, - .rx_fifo = { - .cmd = MAILBOX_DSP2ARM1b, - .data = MAILBOX_DSP2ARM1, - .flag = MAILBOX_DSP2ARM1_Flag, - }, -}; - -static struct omap_mbox mbox_dsp_info = { - .name = "dsp", - .ops = &omap1_mbox_ops, - .priv = &omap1_mbox_dsp_priv, -}; - -static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL }; - -static int omap1_mbox_probe(struct platform_device *pdev) -{ - struct resource *mem; - int ret; - struct omap_mbox **list; - - list = omap1_mboxes; - list[0]->irq = platform_get_irq_byname(pdev, "dsp"); - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mbox_base = ioremap(mem->start, resource_size(mem)); - if (!mbox_base) - return -ENOMEM; - - ret = omap_mbox_register(&pdev->dev, list); - if (ret) { - iounmap(mbox_base); - return ret; - } - - return 0; -} - -static int omap1_mbox_remove(struct platform_device *pdev) -{ - omap_mbox_unregister(); - iounmap(mbox_base); - return 0; -} - -static struct platform_driver omap1_mbox_driver = { - .probe = omap1_mbox_probe, - .remove = omap1_mbox_remove, - .driver = { - .name = "omap-mailbox", - }, -}; - -static int __init omap1_mbox_init(void) -{ - return platform_driver_register(&omap1_mbox_driver); -} - -static void __exit omap1_mbox_exit(void) -{ - platform_driver_unregister(&omap1_mbox_driver); -} - -module_init(omap1_mbox_init); -module_exit(omap1_mbox_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions"); -MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>"); -MODULE_ALIAS("platform:omap1-mailbox"); diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 8e8c605ebef..ea5a27ff994 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -212,9 +212,6 @@ obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o obj-$(CONFIG_OMAP3_EMU) += emu.o obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o -obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o -mailbox_mach-objs := mailbox.o - iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o obj-y += $(iommu-m) $(iommu-y) diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index c33adea0247..fc20a61f6b2 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -112,6 +112,9 @@ struct gpmc_timings nand_default_timings[1] = { .cs_rd_off = 36, .cs_wr_off = 36, + .we_on = 6, + .oe_on = 6, + .adv_on = 6, .adv_rd_off = 24, .adv_wr_off = 36, diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 403c211e35d..aef96e45cb2 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -21,6 +21,7 @@ #include <linux/pinctrl/machine.h> #include <linux/platform_data/omap4-keypad.h> #include <linux/wl12xx.h> +#include <linux/platform_data/mailbox-omap.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -283,25 +284,31 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data return 0; } -#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE) +#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) static inline void __init omap_init_mbox(void) { struct omap_hwmod *oh; struct platform_device *pdev; + struct omap_mbox_pdata *pdata; oh = omap_hwmod_lookup("mailbox"); if (!oh) { pr_err("%s: unable to find hwmod\n", __func__); return; } + if (!oh->dev_attr) { + pr_err("%s: hwmod doesn't have valid attrs\n", __func__); + return; + } - pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0); + pdata = (struct omap_mbox_pdata *)oh->dev_attr; + pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata)); WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n", __func__, PTR_ERR(pdev)); } #else static inline void omap_init_mbox(void) { } -#endif /* CONFIG_OMAP_MBOX_FWK */ +#endif /* CONFIG_OMAP2PLUS_MBOX */ static inline void omap_init_sti(void) {} diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index d9c27195caf..662c7fd633c 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -43,44 +43,6 @@ static struct platform_device gpmc_nand_device = { .resource = gpmc_nand_resource, }; -static int omap2_nand_gpmc_retime( - struct omap_nand_platform_data *gpmc_nand_data, - struct gpmc_timings *gpmc_t) -{ - struct gpmc_timings t; - int err; - - memset(&t, 0, sizeof(t)); - t.sync_clk = gpmc_t->sync_clk; - t.cs_on = gpmc_t->cs_on; - t.adv_on = gpmc_t->adv_on; - - /* Read */ - t.adv_rd_off = gpmc_t->adv_rd_off; - t.oe_on = t.adv_on; - t.access = gpmc_t->access; - t.oe_off = gpmc_t->oe_off; - t.cs_rd_off = gpmc_t->cs_rd_off; - t.rd_cycle = gpmc_t->rd_cycle; - - /* Write */ - t.adv_wr_off = gpmc_t->adv_wr_off; - t.we_on = t.oe_on; - if (cpu_is_omap34xx()) { - t.wr_data_mux_bus = gpmc_t->wr_data_mux_bus; - t.wr_access = gpmc_t->wr_access; - } - t.we_off = gpmc_t->we_off; - t.cs_wr_off = gpmc_t->cs_wr_off; - t.wr_cycle = gpmc_t->wr_cycle; - - err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t); - if (err) - return err; - - return 0; -} - static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) { /* support only OMAP3 class */ @@ -131,7 +93,7 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); if (gpmc_t) { - err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t); + err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t); if (err < 0) { dev_err(dev, "Unable to set gpmc timings: %d\n", err); return err; @@ -140,8 +102,6 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, if (gpmc_nand_data->of_node) { gpmc_read_settings_dt(gpmc_nand_data->of_node, &s); } else { - s.device_nand = true; - /* Enable RD PIN Monitoring Reg */ if (gpmc_nand_data->dev_ready) { s.wait_on_read = true; @@ -149,6 +109,8 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, } } + s.device_nand = true; + if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) s.device_width = GPMC_DEVWIDTH_16BIT; else diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 6c4da1254f5..1c7969e965d 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -30,6 +30,7 @@ #include <linux/of_mtd.h> #include <linux/of_device.h> #include <linux/mtd/nand.h> +#include <linux/pm_runtime.h> #include <linux/platform_data/mtd-nand-omap2.h> @@ -155,6 +156,7 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); /* Define chip-selects as reserved by default until probe completes */ static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1); +static unsigned int gpmc_cs_num = GPMC_CS_NUM; static unsigned int gpmc_nr_waitpins; static struct device *gpmc_dev; static int gpmc_irq; @@ -521,8 +523,10 @@ static int gpmc_cs_remap(int cs, u32 base) int ret; u32 old_base, size; - if (cs > GPMC_CS_NUM) + if (cs > gpmc_cs_num) { + pr_err("%s: requested chip-select is disabled\n", __func__); return -ENODEV; + } gpmc_cs_get_memconf(cs, &old_base, &size); if (base == old_base) return 0; @@ -545,9 +549,10 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) struct resource *res = &gpmc_cs_mem[cs]; int r = -1; - if (cs > GPMC_CS_NUM) + if (cs > gpmc_cs_num) { + pr_err("%s: requested chip-select is disabled\n", __func__); return -ENODEV; - + } size = gpmc_mem_align(size); if (size > (1 << GPMC_SECTION_SHIFT)) return -ENOMEM; @@ -582,7 +587,7 @@ EXPORT_SYMBOL(gpmc_cs_request); void gpmc_cs_free(int cs) { spin_lock(&gpmc_mem_lock); - if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) { + if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) { printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs); BUG(); spin_unlock(&gpmc_mem_lock); @@ -777,7 +782,7 @@ static void gpmc_mem_exit(void) { int cs; - for (cs = 0; cs < GPMC_CS_NUM; cs++) { + for (cs = 0; cs < gpmc_cs_num; cs++) { if (!gpmc_cs_mem_enabled(cs)) continue; gpmc_cs_delete_mem(cs); @@ -798,7 +803,7 @@ static void gpmc_mem_init(void) gpmc_mem_root.end = GPMC_MEM_END; /* Reserve all regions that has been set up by bootloader */ - for (cs = 0; cs < GPMC_CS_NUM; cs++) { + for (cs = 0; cs < gpmc_cs_num; cs++) { u32 base, size; if (!gpmc_cs_mem_enabled(cs)) @@ -1245,7 +1250,6 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p) p->sync_read = of_property_read_bool(np, "gpmc,sync-read"); p->sync_write = of_property_read_bool(np, "gpmc,sync-write"); - p->device_nand = of_property_read_bool(np, "gpmc,device-nand"); of_property_read_u32(np, "gpmc,device-width", &p->device_width); of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data); @@ -1345,6 +1349,13 @@ static const char * const nand_ecc_opts[] = { [OMAP_ECC_BCH8_CODE_HW] = "bch8", }; +static const char * const nand_xfer_types[] = { + [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled", + [NAND_OMAP_POLLED] = "polled", + [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma", + [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq", +}; + static int gpmc_probe_nand_child(struct platform_device *pdev, struct device_node *child) { @@ -1374,6 +1385,13 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, break; } + if (!of_property_read_string(child, "ti,nand-xfer-type", &s)) + for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++) + if (!strcasecmp(s, nand_xfer_types[val])) { + gpmc_nand_data->xfer_type = val; + break; + } + val = of_get_nand_bus_width(child); if (val == 16) gpmc_nand_data->devsize = NAND_BUSWIDTH_16; @@ -1513,6 +1531,20 @@ static int gpmc_probe_dt(struct platform_device *pdev) if (!of_id) return 0; + ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-cs", + &gpmc_cs_num); + if (ret < 0) { + pr_err("%s: number of chip-selects not defined\n", __func__); + return ret; + } else if (gpmc_cs_num < 1) { + pr_err("%s: all chip-selects are disabled\n", __func__); + return -EINVAL; + } else if (gpmc_cs_num > GPMC_CS_NUM) { + pr_err("%s: number of supported chip-selects cannot be > %d\n", + __func__, GPMC_CS_NUM); + return -EINVAL; + } + ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins", &gpmc_nr_waitpins); if (ret < 0) { @@ -1577,7 +1609,8 @@ static int gpmc_probe(struct platform_device *pdev) return PTR_ERR(gpmc_l3_clk); } - clk_prepare_enable(gpmc_l3_clk); + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); gpmc_dev = &pdev->dev; @@ -1610,12 +1643,14 @@ static int gpmc_probe(struct platform_device *pdev) /* Now the GPMC is initialised, unreserve the chip-selects */ gpmc_cs_map = 0; - if (!pdev->dev.of_node) + if (!pdev->dev.of_node) { + gpmc_cs_num = GPMC_CS_NUM; gpmc_nr_waitpins = GPMC_NR_WAITPINS; + } rc = gpmc_probe_dt(pdev); if (rc < 0) { - clk_disable_unprepare(gpmc_l3_clk); + pm_runtime_put_sync(&pdev->dev); clk_put(gpmc_l3_clk); dev_err(gpmc_dev, "failed to probe DT parameters\n"); return rc; @@ -1628,10 +1663,30 @@ static int gpmc_remove(struct platform_device *pdev) { gpmc_free_irq(); gpmc_mem_exit(); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); gpmc_dev = NULL; return 0; } +#ifdef CONFIG_PM_SLEEP +static int gpmc_suspend(struct device *dev) +{ + omap3_gpmc_save_context(); + pm_runtime_put_sync(dev); + return 0; +} + +static int gpmc_resume(struct device *dev) +{ + pm_runtime_get_sync(dev); + omap3_gpmc_restore_context(); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(gpmc_pm_ops, gpmc_suspend, gpmc_resume); + static struct platform_driver gpmc_driver = { .probe = gpmc_probe, .remove = gpmc_remove, @@ -1639,6 +1694,7 @@ static struct platform_driver gpmc_driver = { .name = DEVICE_NAME, .owner = THIS_MODULE, .of_match_table = of_match_ptr(gpmc_dt_ids), + .pm = &gpmc_pm_ops, }, }; @@ -1701,7 +1757,6 @@ static irqreturn_t gpmc_handle_irq(int irq, void *dev) return IRQ_HANDLED; } -#ifdef CONFIG_ARCH_OMAP3 static struct omap3_gpmc_regs gpmc_context; void omap3_gpmc_save_context(void) @@ -1715,7 +1770,7 @@ void omap3_gpmc_save_context(void) gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1); gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2); gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL); - for (i = 0; i < GPMC_CS_NUM; i++) { + for (i = 0; i < gpmc_cs_num; i++) { gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i); if (gpmc_context.cs_context[i].is_valid) { gpmc_context.cs_context[i].config1 = @@ -1747,7 +1802,7 @@ void omap3_gpmc_restore_context(void) gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1); gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2); gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control); - for (i = 0; i < GPMC_CS_NUM; i++) { + for (i = 0; i < gpmc_cs_num; i++) { if (gpmc_context.cs_context[i].is_valid) { gpmc_cs_write_reg(i, GPMC_CS_CONFIG1, gpmc_context.cs_context[i].config1); @@ -1766,4 +1821,3 @@ void omap3_gpmc_restore_context(void) } } } -#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c deleted file mode 100644 index 0b080267b7f..00000000000 --- a/arch/arm/mach-omap2/mailbox.c +++ /dev/null @@ -1,430 +0,0 @@ -/* - * Mailbox reservation modules for OMAP2/3 - * - * Copyright (C) 2006-2009 Nokia Corporation - * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * and Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/pm_runtime.h> - -#include <plat/mailbox.h> - -#include "soc.h" - -#define MAILBOX_REVISION 0x000 -#define MAILBOX_MESSAGE(m) (0x040 + 4 * (m)) -#define MAILBOX_FIFOSTATUS(m) (0x080 + 4 * (m)) -#define MAILBOX_MSGSTATUS(m) (0x0c0 + 4 * (m)) -#define MAILBOX_IRQSTATUS(u) (0x100 + 8 * (u)) -#define MAILBOX_IRQENABLE(u) (0x104 + 8 * (u)) - -#define OMAP4_MAILBOX_IRQSTATUS(u) (0x104 + 0x10 * (u)) -#define OMAP4_MAILBOX_IRQENABLE(u) (0x108 + 0x10 * (u)) -#define OMAP4_MAILBOX_IRQENABLE_CLR(u) (0x10c + 0x10 * (u)) - -#define MAILBOX_IRQ_NEWMSG(m) (1 << (2 * (m))) -#define MAILBOX_IRQ_NOTFULL(m) (1 << (2 * (m) + 1)) - -#define MBOX_REG_SIZE 0x120 - -#define OMAP4_MBOX_REG_SIZE 0x130 - -#define MBOX_NR_REGS (MBOX_REG_SIZE / sizeof(u32)) -#define OMAP4_MBOX_NR_REGS (OMAP4_MBOX_REG_SIZE / sizeof(u32)) - -static void __iomem *mbox_base; - -struct omap_mbox2_fifo { - unsigned long msg; - unsigned long fifo_stat; - unsigned long msg_stat; -}; - -struct omap_mbox2_priv { - struct omap_mbox2_fifo tx_fifo; - struct omap_mbox2_fifo rx_fifo; - unsigned long irqenable; - unsigned long irqstatus; - u32 newmsg_bit; - u32 notfull_bit; - u32 ctx[OMAP4_MBOX_NR_REGS]; - unsigned long irqdisable; -}; - -static void omap2_mbox_enable_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq); - -static inline unsigned int mbox_read_reg(size_t ofs) -{ - return __raw_readl(mbox_base + ofs); -} - -static inline void mbox_write_reg(u32 val, size_t ofs) -{ - __raw_writel(val, mbox_base + ofs); -} - -/* Mailbox H/W preparations */ -static int omap2_mbox_startup(struct omap_mbox *mbox) -{ - u32 l; - - pm_runtime_enable(mbox->dev->parent); - pm_runtime_get_sync(mbox->dev->parent); - - l = mbox_read_reg(MAILBOX_REVISION); - pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f)); - - return 0; -} - -static void omap2_mbox_shutdown(struct omap_mbox *mbox) -{ - pm_runtime_put_sync(mbox->dev->parent); - pm_runtime_disable(mbox->dev->parent); -} - -/* Mailbox FIFO handle functions */ -static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox) -{ - struct omap_mbox2_fifo *fifo = - &((struct omap_mbox2_priv *)mbox->priv)->rx_fifo; - return (mbox_msg_t) mbox_read_reg(fifo->msg); -} - -static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) -{ - struct omap_mbox2_fifo *fifo = - &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo; - mbox_write_reg(msg, fifo->msg); -} - -static int omap2_mbox_fifo_empty(struct omap_mbox *mbox) -{ - struct omap_mbox2_fifo *fifo = - &((struct omap_mbox2_priv *)mbox->priv)->rx_fifo; - return (mbox_read_reg(fifo->msg_stat) == 0); -} - -static int omap2_mbox_fifo_full(struct omap_mbox *mbox) -{ - struct omap_mbox2_fifo *fifo = - &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo; - return mbox_read_reg(fifo->fifo_stat); -} - -/* Mailbox IRQ handle functions */ -static void omap2_mbox_enable_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq) -{ - struct omap_mbox2_priv *p = mbox->priv; - u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - - l = mbox_read_reg(p->irqenable); - l |= bit; - mbox_write_reg(l, p->irqenable); -} - -static void omap2_mbox_disable_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq) -{ - struct omap_mbox2_priv *p = mbox->priv; - u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - - if (!cpu_is_omap44xx()) - bit = mbox_read_reg(p->irqdisable) & ~bit; - - mbox_write_reg(bit, p->irqdisable); -} - -static void omap2_mbox_ack_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq) -{ - struct omap_mbox2_priv *p = mbox->priv; - u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - - mbox_write_reg(bit, p->irqstatus); - - /* Flush posted write for irq status to avoid spurious interrupts */ - mbox_read_reg(p->irqstatus); -} - -static int omap2_mbox_is_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq) -{ - struct omap_mbox2_priv *p = mbox->priv; - u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - u32 enable = mbox_read_reg(p->irqenable); - u32 status = mbox_read_reg(p->irqstatus); - - return (int)(enable & status & bit); -} - -static void omap2_mbox_save_ctx(struct omap_mbox *mbox) -{ - int i; - struct omap_mbox2_priv *p = mbox->priv; - int nr_regs; - if (cpu_is_omap44xx()) - nr_regs = OMAP4_MBOX_NR_REGS; - else - nr_regs = MBOX_NR_REGS; - for (i = 0; i < nr_regs; i++) { - p->ctx[i] = mbox_read_reg(i * sizeof(u32)); - - dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__, - i, p->ctx[i]); - } -} - -static void omap2_mbox_restore_ctx(struct omap_mbox *mbox) -{ - int i; - struct omap_mbox2_priv *p = mbox->priv; - int nr_regs; - if (cpu_is_omap44xx()) - nr_regs = OMAP4_MBOX_NR_REGS; - else - nr_regs = MBOX_NR_REGS; - for (i = 0; i < nr_regs; i++) { - mbox_write_reg(p->ctx[i], i * sizeof(u32)); - - dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__, - i, p->ctx[i]); - } -} - -static struct omap_mbox_ops omap2_mbox_ops = { - .type = OMAP_MBOX_TYPE2, - .startup = omap2_mbox_startup, - .shutdown = omap2_mbox_shutdown, - .fifo_read = omap2_mbox_fifo_read, - .fifo_write = omap2_mbox_fifo_write, - .fifo_empty = omap2_mbox_fifo_empty, - .fifo_full = omap2_mbox_fifo_full, - .enable_irq = omap2_mbox_enable_irq, - .disable_irq = omap2_mbox_disable_irq, - .ack_irq = omap2_mbox_ack_irq, - .is_irq = omap2_mbox_is_irq, - .save_ctx = omap2_mbox_save_ctx, - .restore_ctx = omap2_mbox_restore_ctx, -}; - -/* - * MAILBOX 0: ARM -> DSP, - * MAILBOX 1: ARM <- DSP. - * MAILBOX 2: ARM -> IVA, - * MAILBOX 3: ARM <- IVA. - */ - -/* FIXME: the following structs should be filled automatically by the user id */ - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP2) -/* DSP */ -static struct omap_mbox2_priv omap2_mbox_dsp_priv = { - .tx_fifo = { - .msg = MAILBOX_MESSAGE(0), - .fifo_stat = MAILBOX_FIFOSTATUS(0), - }, - .rx_fifo = { - .msg = MAILBOX_MESSAGE(1), - .msg_stat = MAILBOX_MSGSTATUS(1), - }, - .irqenable = MAILBOX_IRQENABLE(0), - .irqstatus = MAILBOX_IRQSTATUS(0), - .notfull_bit = MAILBOX_IRQ_NOTFULL(0), - .newmsg_bit = MAILBOX_IRQ_NEWMSG(1), - .irqdisable = MAILBOX_IRQENABLE(0), -}; - -struct omap_mbox mbox_dsp_info = { - .name = "dsp", - .ops = &omap2_mbox_ops, - .priv = &omap2_mbox_dsp_priv, -}; -#endif - -#if defined(CONFIG_ARCH_OMAP3) -struct omap_mbox *omap3_mboxes[] = { &mbox_dsp_info, NULL }; -#endif - -#if defined(CONFIG_SOC_OMAP2420) -/* IVA */ -static struct omap_mbox2_priv omap2_mbox_iva_priv = { - .tx_fifo = { - .msg = MAILBOX_MESSAGE(2), - .fifo_stat = MAILBOX_FIFOSTATUS(2), - }, - .rx_fifo = { - .msg = MAILBOX_MESSAGE(3), - .msg_stat = MAILBOX_MSGSTATUS(3), - }, - .irqenable = MAILBOX_IRQENABLE(3), - .irqstatus = MAILBOX_IRQSTATUS(3), - .notfull_bit = MAILBOX_IRQ_NOTFULL(2), - .newmsg_bit = MAILBOX_IRQ_NEWMSG(3), - .irqdisable = MAILBOX_IRQENABLE(3), -}; - -static struct omap_mbox mbox_iva_info = { - .name = "iva", - .ops = &omap2_mbox_ops, - .priv = &omap2_mbox_iva_priv, -}; -#endif - -#ifdef CONFIG_ARCH_OMAP2 -struct omap_mbox *omap2_mboxes[] = { - &mbox_dsp_info, -#ifdef CONFIG_SOC_OMAP2420 - &mbox_iva_info, -#endif - NULL -}; -#endif - -#if defined(CONFIG_ARCH_OMAP4) -/* OMAP4 */ -static struct omap_mbox2_priv omap2_mbox_1_priv = { - .tx_fifo = { - .msg = MAILBOX_MESSAGE(0), - .fifo_stat = MAILBOX_FIFOSTATUS(0), - }, - .rx_fifo = { - .msg = MAILBOX_MESSAGE(1), - .msg_stat = MAILBOX_MSGSTATUS(1), - }, - .irqenable = OMAP4_MAILBOX_IRQENABLE(0), - .irqstatus = OMAP4_MAILBOX_IRQSTATUS(0), - .notfull_bit = MAILBOX_IRQ_NOTFULL(0), - .newmsg_bit = MAILBOX_IRQ_NEWMSG(1), - .irqdisable = OMAP4_MAILBOX_IRQENABLE_CLR(0), -}; - -struct omap_mbox mbox_1_info = { - .name = "mailbox-1", - .ops = &omap2_mbox_ops, - .priv = &omap2_mbox_1_priv, -}; - -static struct omap_mbox2_priv omap2_mbox_2_priv = { - .tx_fifo = { - .msg = MAILBOX_MESSAGE(3), - .fifo_stat = MAILBOX_FIFOSTATUS(3), - }, - .rx_fifo = { - .msg = MAILBOX_MESSAGE(2), - .msg_stat = MAILBOX_MSGSTATUS(2), - }, - .irqenable = OMAP4_MAILBOX_IRQENABLE(0), - .irqstatus = OMAP4_MAILBOX_IRQSTATUS(0), - .notfull_bit = MAILBOX_IRQ_NOTFULL(3), - .newmsg_bit = MAILBOX_IRQ_NEWMSG(2), - .irqdisable = OMAP4_MAILBOX_IRQENABLE_CLR(0), -}; - -struct omap_mbox mbox_2_info = { - .name = "mailbox-2", - .ops = &omap2_mbox_ops, - .priv = &omap2_mbox_2_priv, -}; - -struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL }; -#endif - -static int omap2_mbox_probe(struct platform_device *pdev) -{ - struct resource *mem; - int ret; - struct omap_mbox **list; - - if (false) - ; -#if defined(CONFIG_ARCH_OMAP3) - else if (cpu_is_omap34xx()) { - list = omap3_mboxes; - - list[0]->irq = platform_get_irq(pdev, 0); - } -#endif -#if defined(CONFIG_ARCH_OMAP2) - else if (cpu_is_omap2430()) { - list = omap2_mboxes; - - list[0]->irq = platform_get_irq(pdev, 0); - } else if (cpu_is_omap2420()) { - list = omap2_mboxes; - - list[0]->irq = platform_get_irq_byname(pdev, "dsp"); - list[1]->irq = platform_get_irq_byname(pdev, "iva"); - } -#endif -#if defined(CONFIG_ARCH_OMAP4) - else if (cpu_is_omap44xx()) { - list = omap4_mboxes; - - list[0]->irq = list[1]->irq = platform_get_irq(pdev, 0); - } -#endif - else { - pr_err("%s: platform not supported\n", __func__); - return -ENODEV; - } - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mbox_base = ioremap(mem->start, resource_size(mem)); - if (!mbox_base) - return -ENOMEM; - - ret = omap_mbox_register(&pdev->dev, list); - if (ret) { - iounmap(mbox_base); - return ret; - } - - return 0; -} - -static int omap2_mbox_remove(struct platform_device *pdev) -{ - omap_mbox_unregister(); - iounmap(mbox_base); - return 0; -} - -static struct platform_driver omap2_mbox_driver = { - .probe = omap2_mbox_probe, - .remove = omap2_mbox_remove, - .driver = { - .name = "omap-mailbox", - }, -}; - -static int __init omap2_mbox_init(void) -{ - return platform_driver_register(&omap2_mbox_driver); -} - -static void __exit omap2_mbox_exit(void) -{ - platform_driver_unregister(&omap2_mbox_driver); -} - -module_init(omap2_mbox_init); -module_exit(omap2_mbox_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("omap mailbox: omap2/3/4 architecture specific functions"); -MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>"); -MODULE_AUTHOR("Paul Mundt"); -MODULE_ALIAS("platform:omap2-mailbox"); diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 5137cc84b50..d8b9d60f854 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -16,6 +16,7 @@ #include <linux/i2c-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/omap-dma.h> +#include <linux/platform_data/mailbox-omap.h> #include <plat/dmtimer.h> #include "omap_hwmod.h" @@ -166,6 +167,18 @@ static struct omap_hwmod omap2420_dma_system_hwmod = { }; /* mailbox */ +static struct omap_mbox_dev_info omap2420_mailbox_info[] = { + { .name = "dsp", .tx_id = 0, .rx_id = 1, .irq_id = 0, .usr_id = 0 }, + { .name = "iva", .tx_id = 2, .rx_id = 3, .irq_id = 1, .usr_id = 3 }, +}; + +static struct omap_mbox_pdata omap2420_mailbox_attrs = { + .num_users = 4, + .num_fifos = 6, + .info_cnt = ARRAY_SIZE(omap2420_mailbox_info), + .info = omap2420_mailbox_info, +}; + static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = { { .name = "dsp", .irq = 26 + OMAP_INTC_START, }, { .name = "iva", .irq = 34 + OMAP_INTC_START, }, @@ -186,6 +199,7 @@ static struct omap_hwmod omap2420_mailbox_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, }, }, + .dev_attr = &omap2420_mailbox_attrs, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 4ce999ee3ee..5b9083461dc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -17,6 +17,7 @@ #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/omap-dma.h> +#include <linux/platform_data/mailbox-omap.h> #include <plat/dmtimer.h> #include "omap_hwmod.h" @@ -170,6 +171,17 @@ static struct omap_hwmod omap2430_dma_system_hwmod = { }; /* mailbox */ +static struct omap_mbox_dev_info omap2430_mailbox_info[] = { + { .name = "dsp", .tx_id = 0, .rx_id = 1 }, +}; + +static struct omap_mbox_pdata omap2430_mailbox_attrs = { + .num_users = 4, + .num_fifos = 6, + .info_cnt = ARRAY_SIZE(omap2430_mailbox_info), + .info = omap2430_mailbox_info, +}; + static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = { { .irq = 26 + OMAP_INTC_START, }, { .irq = -1 }, @@ -189,6 +201,7 @@ static struct omap_hwmod omap2430_mailbox_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, }, }, + .dev_attr = &omap2430_mailbox_attrs, }; /* mcspi3 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index fa991541144..f7a3df2fb57 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -25,6 +25,7 @@ #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/iommu-omap.h> +#include <linux/platform_data/mailbox-omap.h> #include <plat/dmtimer.h> #include "am35xx.h" @@ -1504,6 +1505,17 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = { .sysc = &omap3xxx_mailbox_sysc, }; +static struct omap_mbox_dev_info omap3xxx_mailbox_info[] = { + { .name = "dsp", .tx_id = 0, .rx_id = 1 }, +}; + +static struct omap_mbox_pdata omap3xxx_mailbox_attrs = { + .num_users = 2, + .num_fifos = 2, + .info_cnt = ARRAY_SIZE(omap3xxx_mailbox_info), + .info = omap3xxx_mailbox_info, +}; + static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = { { .irq = 26 + OMAP_INTC_START, }, { .irq = -1 }, @@ -1523,6 +1535,7 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = { .idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT, }, }, + .dev_attr = &omap3xxx_mailbox_attrs, }; /* diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 0adb2b85f83..6d9252e081c 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -28,7 +28,7 @@ config CPU_S3C2410 select CPU_ARM920T select CPU_LLSERIAL_S3C2410 select S3C2410_CLOCK - select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX + select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM select SAMSUNG_HRT select SAMSUNG_WDT_RESET @@ -206,27 +206,38 @@ config S3C24XX_GPIO_EXTRA128 Add an extra 128 gpio numbers to the available GPIO pool. This is available for boards that need extra gpios for external devices. +config S3C24XX_PLL + bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" + depends on ARM_S3C24XX + help + Compile in support for changing the PLL frequency from the + S3C24XX series CPUfreq driver. The PLL takes time to settle + after a frequency change, so by default it is not enabled. + + This also means that the PLL tables for the selected CPU(s) will + be built which may increase the size of the kernel image. + # cpu frequency items common between s3c2410 and s3c2440/s3c2442 config S3C2410_IOTIMING bool - depends on CPU_FREQ_S3C24XX + depends on ARM_S3C24XX_CPUFREQ help Internal node to select io timing code that is common to the s3c2410 and s3c2440/s3c2442 cpu frequency support. config S3C2410_CPUFREQ_UTILS - bool - depends on CPU_FREQ_S3C24XX - help - Internal node to select timing code that is common to the s3c2410 - and s3c2440/s3c244 cpu frequency support. + bool + depends on ARM_S3C24XX_CPUFREQ + help + Internal node to select timing code that is common to the s3c2410 + and s3c2440/s3c244 cpu frequency support. # cpu frequency support common to s3c2412, s3c2413 and s3c2442 config S3C2412_IOTIMING bool - depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443) + depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443) help Intel node to select io timing code that is common to the s3c2412 and the s3c2443. @@ -235,16 +246,9 @@ config S3C2412_IOTIMING if CPU_S3C2410 -config S3C2410_CPUFREQ - bool - depends on CPU_FREQ_S3C24XX - select S3C2410_CPUFREQ_UTILS - help - CPU Frequency scaling support for S3C2410 - config S3C2410_PLL bool - depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL + depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL default y help Select the PLL table for the S3C2410 @@ -280,7 +284,7 @@ config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select ISA select MACH_BAST_IDE - select S3C2410_IOTIMING if S3C2410_CPUFREQ + select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ select S3C24XX_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM @@ -387,14 +391,6 @@ config CPU_S3C2412_ONLY !CPU_S3C2442 && !CPU_S3C2443 default y -config S3C2412_CPUFREQ - bool - depends on CPU_FREQ_S3C24XX - default y - select S3C2412_IOTIMING - help - CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. - config S3C2412_DMA bool help @@ -508,14 +504,6 @@ endif # CPU_S3C2416 if CPU_S3C2440 -config S3C2440_CPUFREQ - bool "S3C2440/S3C2442 CPU Frequency scaling support" - depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) - default y - select S3C2410_CPUFREQ_UTILS - help - CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. - config S3C2440_DMA bool help @@ -535,15 +523,15 @@ config S3C2440_XTAL_16934400 config S3C2440_PLL_12000000 bool - depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000 - default y if CPU_FREQ_S3C24XX_PLL + depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000 + default y if S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. config S3C2440_PLL_16934400 bool - depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400 - default y if CPU_FREQ_S3C24XX_PLL + depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400 + default y if S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. @@ -597,7 +585,7 @@ config MACH_NEXCODER_2440 config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" - select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 select S3C24XX_DCLK select S3C24XX_GPIO_EXTRA128 @@ -669,7 +657,7 @@ config MACH_RX1950 bool "HP iPAQ rx1950" select I2C select PM_H1940 if PM - select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_16934400 select S3C24XX_DCLK select S3C24XX_PWM diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 6de730bada4..7f54e5b954c 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -17,13 +17,11 @@ obj- := obj-y += common.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o -obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o -obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o @@ -34,7 +32,6 @@ obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o -obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o @@ -59,9 +56,6 @@ obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o -obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpufreq.o -obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o - # # machine support # following is ordered alphabetically by option text. diff --git a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c deleted file mode 100644 index 9b7b4289d66..00000000000 --- a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * Copyright (c) 2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX CPU Frequency scaling - debugfs status support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/export.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/err.h> - -#include <plat/cpu-freq-core.h> - -static struct dentry *dbgfs_root; -static struct dentry *dbgfs_file_io; -static struct dentry *dbgfs_file_info; -static struct dentry *dbgfs_file_board; - -#define print_ns(x) ((x) / 10), ((x) % 10) - -static void show_max(struct seq_file *seq, struct s3c_freq *f) -{ - seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n", - f->fclk, f->hclk, f->pclk, f->armclk); -} - -static int board_show(struct seq_file *seq, void *p) -{ - struct s3c_cpufreq_config *cfg; - struct s3c_cpufreq_board *brd; - - cfg = s3c_cpufreq_getconfig(); - if (!cfg) { - seq_printf(seq, "no configuration registered\n"); - return 0; - } - - brd = cfg->board; - if (!brd) { - seq_printf(seq, "no board definition set?\n"); - return 0; - } - - seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh); - seq_printf(seq, "auto_io=%u\n", brd->auto_io); - seq_printf(seq, "need_io=%u\n", brd->need_io); - - show_max(seq, &brd->max); - - - return 0; -} - -static int fops_board_open(struct inode *inode, struct file *file) -{ - return single_open(file, board_show, NULL); -} - -static const struct file_operations fops_board = { - .open = fops_board_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static int info_show(struct seq_file *seq, void *p) -{ - struct s3c_cpufreq_config *cfg; - - cfg = s3c_cpufreq_getconfig(); - if (!cfg) { - seq_printf(seq, "no configuration registered\n"); - return 0; - } - - seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk); - seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n", - cfg->freq.hclk, print_ns(cfg->freq.hclk_tns)); - seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk); - seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk); - seq_printf(seq, "\n"); - - show_max(seq, &cfg->max); - - seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n", - cfg->divs.h_divisor, cfg->divs.p_divisor, - cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off"); - seq_printf(seq, "\n"); - - seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll); - - return 0; -} - -static int fops_info_open(struct inode *inode, struct file *file) -{ - return single_open(file, info_show, NULL); -} - -static const struct file_operations fops_info = { - .open = fops_info_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static int io_show(struct seq_file *seq, void *p) -{ - void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *); - struct s3c_cpufreq_config *cfg; - struct s3c_iotimings *iot; - union s3c_iobank *iob; - int bank; - - cfg = s3c_cpufreq_getconfig(); - if (!cfg) { - seq_printf(seq, "no configuration registered\n"); - return 0; - } - - show_bank = cfg->info->debug_io_show; - if (!show_bank) { - seq_printf(seq, "no code to show bank timing\n"); - return 0; - } - - iot = s3c_cpufreq_getiotimings(); - if (!iot) { - seq_printf(seq, "no io timings registered\n"); - return 0; - } - - seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns)); - - for (bank = 0; bank < MAX_BANKS; bank++) { - iob = &iot->bank[bank]; - - seq_printf(seq, "bank %d: ", bank); - - if (!iob->io_2410) { - seq_printf(seq, "nothing set\n"); - continue; - } - - show_bank(seq, cfg, iob); - } - - return 0; -} - -static int fops_io_open(struct inode *inode, struct file *file) -{ - return single_open(file, io_show, NULL); -} - -static const struct file_operations fops_io = { - .open = fops_io_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - - -static int __init s3c_freq_debugfs_init(void) -{ - dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL); - if (IS_ERR(dbgfs_root)) { - printk(KERN_ERR "%s: error creating debugfs root\n", __func__); - return PTR_ERR(dbgfs_root); - } - - dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root, - NULL, &fops_io); - - dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root, - NULL, &fops_info); - - dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root, - NULL, &fops_board); - - return 0; -} - -late_initcall(s3c_freq_debugfs_init); - diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c deleted file mode 100644 index cfa0dd8723e..00000000000 --- a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Copyright (c) 2006-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 CPU Frequency scaling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/clock.h> -#include <plat/cpu-freq-core.h> - -/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */ - -static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - u32 clkdiv = 0; - - if (cfg->divs.h_divisor == 2) - clkdiv |= S3C2410_CLKDIVN_HDIVN; - - if (cfg->divs.p_divisor != cfg->divs.h_divisor) - clkdiv |= S3C2410_CLKDIVN_PDIVN; - - __raw_writel(clkdiv, S3C2410_CLKDIVN); -} - -static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned long hclk, fclk, pclk; - unsigned int hdiv, pdiv; - unsigned long hclk_max; - - fclk = cfg->freq.fclk; - hclk_max = cfg->max.hclk; - - cfg->freq.armclk = fclk; - - s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n", - __func__, fclk, hclk_max); - - hdiv = (fclk > cfg->max.hclk) ? 2 : 1; - hclk = fclk / hdiv; - - if (hclk > cfg->max.hclk) { - s3c_freq_dbg("%s: hclk too big\n", __func__); - return -EINVAL; - } - - pdiv = (hclk > cfg->max.pclk) ? 2 : 1; - pclk = hclk / pdiv; - - if (pclk > cfg->max.pclk) { - s3c_freq_dbg("%s: pclk too big\n", __func__); - return -EINVAL; - } - - pdiv *= hdiv; - - /* record the result */ - cfg->divs.p_divisor = pdiv; - cfg->divs.h_divisor = hdiv; - - return 0; -} - -static struct s3c_cpufreq_info s3c2410_cpufreq_info = { - .max = { - .fclk = 200000000, - .hclk = 100000000, - .pclk = 50000000, - }, - - /* transition latency is about 5ms worst-case, so - * set 10ms to be sure */ - .latency = 10000000, - - .locktime_m = 150, - .locktime_u = 150, - .locktime_bits = 12, - - .need_pll = 1, - - .name = "s3c2410", - .calc_iotiming = s3c2410_iotiming_calc, - .set_iotiming = s3c2410_iotiming_set, - .get_iotiming = s3c2410_iotiming_get, - .resume_clocks = s3c2410_setup_clocks, - - .set_fvco = s3c2410_set_fvco, - .set_refresh = s3c2410_cpufreq_setrefresh, - .set_divs = s3c2410_cpufreq_setdivs, - .calc_divs = s3c2410_cpufreq_calcdivs, - - .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), -}; - -static int s3c2410_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - return s3c_cpufreq_register(&s3c2410_cpufreq_info); -} - -static struct subsys_interface s3c2410_cpufreq_interface = { - .name = "s3c2410_cpufreq", - .subsys = &s3c2410_subsys, - .add_dev = s3c2410_cpufreq_add, -}; - -static int __init s3c2410_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2410_cpufreq_interface); -} -arch_initcall(s3c2410_cpufreq_init); - -static int s3c2410a_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - /* alter the maximum freq settings for S3C2410A. If a board knows - * it only has a maximum of 200, then it should register its own - * limits. */ - - s3c2410_cpufreq_info.max.fclk = 266000000; - s3c2410_cpufreq_info.max.hclk = 133000000; - s3c2410_cpufreq_info.max.pclk = 66500000; - s3c2410_cpufreq_info.name = "s3c2410a"; - - return s3c2410_cpufreq_add(dev, sif); -} - -static struct subsys_interface s3c2410a_cpufreq_interface = { - .name = "s3c2410a_cpufreq", - .subsys = &s3c2410a_subsys, - .add_dev = s3c2410a_cpufreq_add, -}; - -static int __init s3c2410a_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2410a_cpufreq_interface); -} -arch_initcall(s3c2410a_cpufreq_init); diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c deleted file mode 100644 index 8bf0f3a7747..00000000000 --- a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2412 CPU Frequency scalling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/clock.h> -#include <plat/cpu-freq-core.h> - -#include "s3c2412.h" - -/* our clock resources. */ -static struct clk *xtal; -static struct clk *fclk; -static struct clk *hclk; -static struct clk *armclk; - -/* HDIV: 1, 2, 3, 4, 6, 8 */ - -static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned int hdiv, pdiv, armdiv, dvs; - unsigned long hclk, fclk, armclk, armdiv_clk; - unsigned long hclk_max; - - fclk = cfg->freq.fclk; - armclk = cfg->freq.armclk; - hclk_max = cfg->max.hclk; - - /* We can't run hclk above armclk as at the best we have to - * have armclk and hclk in dvs mode. */ - - if (hclk_max > armclk) - hclk_max = armclk; - - s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n", - __func__, fclk, armclk, hclk_max); - s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n", - __func__, cfg->freq.fclk, cfg->freq.armclk, - cfg->freq.hclk, cfg->freq.pclk); - - armdiv = fclk / armclk; - - if (armdiv < 1) - armdiv = 1; - if (armdiv > 2) - armdiv = 2; - - cfg->divs.arm_divisor = armdiv; - armdiv_clk = fclk / armdiv; - - hdiv = armdiv_clk / hclk_max; - if (hdiv < 1) - hdiv = 1; - - cfg->freq.hclk = hclk = armdiv_clk / hdiv; - - /* set dvs depending on whether we reached armclk or not. */ - cfg->divs.dvs = dvs = armclk < armdiv_clk; - - /* update the actual armclk we achieved. */ - cfg->freq.armclk = dvs ? hclk : armdiv_clk; - - s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n", - __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs); - - if (hdiv > 4) - goto invalid; - - pdiv = (hclk > cfg->max.pclk) ? 2 : 1; - - if ((hclk / pdiv) > cfg->max.pclk) - pdiv++; - - cfg->freq.pclk = hclk / pdiv; - - s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); - - if (pdiv > 2) - goto invalid; - - pdiv *= hdiv; - - /* store the result, and then return */ - - cfg->divs.h_divisor = hdiv * armdiv; - cfg->divs.p_divisor = pdiv * armdiv; - - return 0; - -invalid: - return -EINVAL; -} - -static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned long clkdiv; - unsigned long olddiv; - - olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN); - - /* clear off current clock info */ - - clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN; - clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK; - clkdiv &= ~S3C2412_CLKDIVN_PDIVN; - - if (cfg->divs.arm_divisor == 2) - clkdiv |= S3C2412_CLKDIVN_ARMDIVN; - - clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1); - - if (cfg->divs.p_divisor != cfg->divs.h_divisor) - clkdiv |= S3C2412_CLKDIVN_PDIVN; - - s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv); - __raw_writel(clkdiv, S3C2410_CLKDIVN); - - clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); -} - -static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) -{ - struct s3c_cpufreq_board *board = cfg->board; - unsigned long refresh; - - s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__, - board->refresh, cfg->freq.hclk); - - /* Reduce both the refresh time (in ns) and the frequency (in MHz) - * by 10 each to ensure that we do not overflow 32 bit numbers. This - * should work for HCLK up to 133MHz and refresh period up to 30usec. - */ - - refresh = (board->refresh / 10); - refresh *= (cfg->freq.hclk / 100); - refresh /= (1 * 1000 * 1000); /* 10^6 */ - - s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh); - __raw_writel(refresh, S3C2412_REFRESH); -} - -/* set the default cpu frequency information, based on an 200MHz part - * as we have no other way of detecting the speed rating in software. - */ - -static struct s3c_cpufreq_info s3c2412_cpufreq_info = { - .max = { - .fclk = 200000000, - .hclk = 100000000, - .pclk = 50000000, - }, - - .latency = 5000000, /* 5ms */ - - .locktime_m = 150, - .locktime_u = 150, - .locktime_bits = 16, - - .name = "s3c2412", - .set_refresh = s3c2412_cpufreq_setrefresh, - .set_divs = s3c2412_cpufreq_setdivs, - .calc_divs = s3c2412_cpufreq_calcdivs, - - .calc_iotiming = s3c2412_iotiming_calc, - .set_iotiming = s3c2412_iotiming_set, - .get_iotiming = s3c2412_iotiming_get, - - .resume_clocks = s3c2412_setup_clocks, - - .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), -}; - -static int s3c2412_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - unsigned long fclk_rate; - - hclk = clk_get(NULL, "hclk"); - if (IS_ERR(hclk)) { - printk(KERN_ERR "%s: cannot find hclk clock\n", __func__); - return -ENOENT; - } - - fclk = clk_get(NULL, "fclk"); - if (IS_ERR(fclk)) { - printk(KERN_ERR "%s: cannot find fclk clock\n", __func__); - goto err_fclk; - } - - fclk_rate = clk_get_rate(fclk); - if (fclk_rate > 200000000) { - printk(KERN_INFO - "%s: fclk %ld MHz, assuming 266MHz capable part\n", - __func__, fclk_rate / 1000000); - s3c2412_cpufreq_info.max.fclk = 266000000; - s3c2412_cpufreq_info.max.hclk = 133000000; - s3c2412_cpufreq_info.max.pclk = 66000000; - } - - armclk = clk_get(NULL, "armclk"); - if (IS_ERR(armclk)) { - printk(KERN_ERR "%s: cannot find arm clock\n", __func__); - goto err_armclk; - } - - xtal = clk_get(NULL, "xtal"); - if (IS_ERR(xtal)) { - printk(KERN_ERR "%s: cannot find xtal clock\n", __func__); - goto err_xtal; - } - - return s3c_cpufreq_register(&s3c2412_cpufreq_info); - -err_xtal: - clk_put(armclk); -err_armclk: - clk_put(fclk); -err_fclk: - clk_put(hclk); - - return -ENOENT; -} - -static struct subsys_interface s3c2412_cpufreq_interface = { - .name = "s3c2412_cpufreq", - .subsys = &s3c2412_subsys, - .add_dev = s3c2412_cpufreq_add, -}; - -static int s3c2412_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2412_cpufreq_interface); -} -arch_initcall(s3c2412_cpufreq_init); diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c deleted file mode 100644 index 72b2cc8a5a8..00000000000 --- a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c +++ /dev/null @@ -1,312 +0,0 @@ -/* - * Copyright (c) 2006-2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * Vincent Sanders <vince@simtec.co.uk> - * - * S3C2440/S3C2442 CPU Frequency scaling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <mach/hardware.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/cpu-freq-core.h> -#include <plat/clock.h> - -static struct clk *xtal; -static struct clk *fclk; -static struct clk *hclk; -static struct clk *armclk; - -/* HDIV: 1, 2, 3, 4, 6, 8 */ - -static inline int within_khz(unsigned long a, unsigned long b) -{ - long diff = a - b; - - return (diff >= -1000 && diff <= 1000); -} - -/** - * s3c2440_cpufreq_calcdivs - calculate divider settings - * @cfg: The cpu frequency settings. - * - * Calcualte the divider values for the given frequency settings - * specified in @cfg. The values are stored in @cfg for later use - * by the relevant set routine if the request settings can be reached. - */ -int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned int hdiv, pdiv; - unsigned long hclk, fclk, armclk; - unsigned long hclk_max; - - fclk = cfg->freq.fclk; - armclk = cfg->freq.armclk; - hclk_max = cfg->max.hclk; - - s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n", - __func__, fclk, armclk, hclk_max); - - if (armclk > fclk) { - printk(KERN_WARNING "%s: armclk > fclk\n", __func__); - armclk = fclk; - } - - /* if we are in DVS, we need HCLK to be <= ARMCLK */ - if (armclk < fclk && armclk < hclk_max) - hclk_max = armclk; - - for (hdiv = 1; hdiv < 9; hdiv++) { - if (hdiv == 5 || hdiv == 7) - hdiv++; - - hclk = (fclk / hdiv); - if (hclk <= hclk_max || within_khz(hclk, hclk_max)) - break; - } - - s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv); - - if (hdiv > 8) - goto invalid; - - pdiv = (hclk > cfg->max.pclk) ? 2 : 1; - - if ((hclk / pdiv) > cfg->max.pclk) - pdiv++; - - s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); - - if (pdiv > 2) - goto invalid; - - pdiv *= hdiv; - - /* calculate a valid armclk */ - - if (armclk < hclk) - armclk = hclk; - - /* if we're running armclk lower than fclk, this really means - * that the system should go into dvs mode, which means that - * armclk is connected to hclk. */ - if (armclk < fclk) { - cfg->divs.dvs = 1; - armclk = hclk; - } else - cfg->divs.dvs = 0; - - cfg->freq.armclk = armclk; - - /* store the result, and then return */ - - cfg->divs.h_divisor = hdiv; - cfg->divs.p_divisor = pdiv; - - return 0; - - invalid: - return -EINVAL; -} - -#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \ - S3C2440_CAMDIVN_HCLK4_HALF) - -/** - * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings - * @cfg: The cpu frequency settings. - * - * Set the divisors from the settings in @cfg, which where generated - * during the calculation phase by s3c2440_cpufreq_calcdivs(). - */ -static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned long clkdiv, camdiv; - - s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__, - cfg->divs.h_divisor, cfg->divs.p_divisor); - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); - - clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN); - camdiv &= ~CAMDIVN_HCLK_HALF; - - switch (cfg->divs.h_divisor) { - case 1: - clkdiv |= S3C2440_CLKDIVN_HDIVN_1; - break; - - case 2: - clkdiv |= S3C2440_CLKDIVN_HDIVN_2; - break; - - case 6: - camdiv |= S3C2440_CAMDIVN_HCLK3_HALF; - case 3: - clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6; - break; - - case 8: - camdiv |= S3C2440_CAMDIVN_HCLK4_HALF; - case 4: - clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8; - break; - - default: - BUG(); /* we don't expect to get here. */ - } - - if (cfg->divs.p_divisor != cfg->divs.h_divisor) - clkdiv |= S3C2440_CLKDIVN_PDIVN; - - /* todo - set pclk. */ - - /* Write the divisors first with hclk intentionally halved so that - * when we write clkdiv we will under-frequency instead of over. We - * then make a short delay and remove the hclk halving if necessary. - */ - - __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN); - __raw_writel(clkdiv, S3C2410_CLKDIVN); - - ndelay(20); - __raw_writel(camdiv, S3C2440_CAMDIVN); - - clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); -} - -static int run_freq_for(unsigned long max_hclk, unsigned long fclk, - int *divs, - struct cpufreq_frequency_table *table, - size_t table_size) -{ - unsigned long freq; - int index = 0; - int div; - - for (div = *divs; div > 0; div = *divs++) { - freq = fclk / div; - - if (freq > max_hclk && div != 1) - continue; - - freq /= 1000; /* table is in kHz */ - index = s3c_cpufreq_addfreq(table, index, table_size, freq); - if (index < 0) - break; - } - - return index; -} - -static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 }; - -static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg, - struct cpufreq_frequency_table *table, - size_t table_size) -{ - int ret; - - WARN_ON(cfg->info == NULL); - WARN_ON(cfg->board == NULL); - - ret = run_freq_for(cfg->info->max.hclk, - cfg->info->max.fclk, - hclk_divs, - table, table_size); - - s3c_freq_dbg("%s: returning %d\n", __func__, ret); - - return ret; -} - -struct s3c_cpufreq_info s3c2440_cpufreq_info = { - .max = { - .fclk = 400000000, - .hclk = 133333333, - .pclk = 66666666, - }, - - .locktime_m = 300, - .locktime_u = 300, - .locktime_bits = 16, - - .name = "s3c244x", - .calc_iotiming = s3c2410_iotiming_calc, - .set_iotiming = s3c2410_iotiming_set, - .get_iotiming = s3c2410_iotiming_get, - .set_fvco = s3c2410_set_fvco, - - .set_refresh = s3c2410_cpufreq_setrefresh, - .set_divs = s3c2440_cpufreq_setdivs, - .calc_divs = s3c2440_cpufreq_calcdivs, - .calc_freqtable = s3c2440_cpufreq_calctable, - - .resume_clocks = s3c244x_setup_clocks, - - .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), -}; - -static int s3c2440_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - xtal = s3c_cpufreq_clk_get(NULL, "xtal"); - hclk = s3c_cpufreq_clk_get(NULL, "hclk"); - fclk = s3c_cpufreq_clk_get(NULL, "fclk"); - armclk = s3c_cpufreq_clk_get(NULL, "armclk"); - - if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) { - printk(KERN_ERR "%s: failed to get clocks\n", __func__); - return -ENOENT; - } - - return s3c_cpufreq_register(&s3c2440_cpufreq_info); -} - -static struct subsys_interface s3c2440_cpufreq_interface = { - .name = "s3c2440_cpufreq", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_cpufreq_add, -}; - -static int s3c2440_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2440_cpufreq_interface); -} - -/* arch_initcall adds the clocks we need, so use subsys_initcall. */ -subsys_initcall(s3c2440_cpufreq_init); - -static struct subsys_interface s3c2442_cpufreq_interface = { - .name = "s3c2442_cpufreq", - .subsys = &s3c2442_subsys, - .add_dev = s3c2440_cpufreq_add, -}; - -static int s3c2442_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2442_cpufreq_interface); -} -subsys_initcall(s3c2442_cpufreq_init); diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq.c deleted file mode 100644 index 3c0e78ede0d..00000000000 --- a/arch/arm/mach-s3c24xx/cpufreq.c +++ /dev/null @@ -1,711 +0,0 @@ -/* - * Copyright (c) 2006-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX CPU Frequency scaling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/cpu.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/device.h> -#include <linux/sysfs.h> -#include <linux/slab.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <plat/cpu.h> -#include <plat/clock.h> -#include <plat/cpu-freq-core.h> - -#include <mach/regs-clock.h> - -/* note, cpufreq support deals in kHz, no Hz */ - -static struct cpufreq_driver s3c24xx_driver; -static struct s3c_cpufreq_config cpu_cur; -static struct s3c_iotimings s3c24xx_iotiming; -static struct cpufreq_frequency_table *pll_reg; -static unsigned int last_target = ~0; -static unsigned int ftab_size; -static struct cpufreq_frequency_table *ftab; - -static struct clk *_clk_mpll; -static struct clk *_clk_xtal; -static struct clk *clk_fclk; -static struct clk *clk_hclk; -static struct clk *clk_pclk; -static struct clk *clk_arm; - -#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS -struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void) -{ - return &cpu_cur; -} - -struct s3c_iotimings *s3c_cpufreq_getiotimings(void) -{ - return &s3c24xx_iotiming; -} -#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */ - -static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) -{ - unsigned long fclk, pclk, hclk, armclk; - - cfg->freq.fclk = fclk = clk_get_rate(clk_fclk); - cfg->freq.hclk = hclk = clk_get_rate(clk_hclk); - cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); - cfg->freq.armclk = armclk = clk_get_rate(clk_arm); - - cfg->pll.index = __raw_readl(S3C2410_MPLLCON); - cfg->pll.frequency = fclk; - - cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); - - cfg->divs.h_divisor = fclk / hclk; - cfg->divs.p_divisor = fclk / pclk; -} - -static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg) -{ - unsigned long pll = cfg->pll.frequency; - - cfg->freq.fclk = pll; - cfg->freq.hclk = pll / cfg->divs.h_divisor; - cfg->freq.pclk = pll / cfg->divs.p_divisor; - - /* convert hclk into 10ths of nanoseconds for io calcs */ - cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); -} - -static inline int closer(unsigned int target, unsigned int n, unsigned int c) -{ - int diff_cur = abs(target - c); - int diff_new = abs(target - n); - - return (diff_new < diff_cur); -} - -static void s3c_cpufreq_show(const char *pfx, - struct s3c_cpufreq_config *cfg) -{ - s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n", - pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk, - cfg->freq.hclk, cfg->divs.h_divisor, - cfg->freq.pclk, cfg->divs.p_divisor); -} - -/* functions to wrapper the driver info calls to do the cpu specific work */ - -static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg) -{ - if (cfg->info->set_iotiming) - (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming); -} - -static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg) -{ - if (cfg->info->calc_iotiming) - return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming); - - return 0; -} - -static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) -{ - (cfg->info->set_refresh)(cfg); -} - -static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - (cfg->info->set_divs)(cfg); -} - -static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - return (cfg->info->calc_divs)(cfg); -} - -static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg) -{ - (cfg->info->set_fvco)(cfg); -} - -static inline void s3c_cpufreq_resume_clocks(void) -{ - cpu_cur.info->resume_clocks(); -} - -static inline void s3c_cpufreq_updateclk(struct clk *clk, - unsigned int freq) -{ - clk_set_rate(clk, freq); -} - -static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, - unsigned int target_freq, - struct cpufreq_frequency_table *pll) -{ - struct s3c_cpufreq_freqs freqs; - struct s3c_cpufreq_config cpu_new; - unsigned long flags; - - cpu_new = cpu_cur; /* copy new from current */ - - s3c_cpufreq_show("cur", &cpu_cur); - - /* TODO - check for DMA currently outstanding */ - - cpu_new.pll = pll ? *pll : cpu_cur.pll; - - if (pll) - freqs.pll_changing = 1; - - /* update our frequencies */ - - cpu_new.freq.armclk = target_freq; - cpu_new.freq.fclk = cpu_new.pll.frequency; - - if (s3c_cpufreq_calcdivs(&cpu_new) < 0) { - printk(KERN_ERR "no divisors for %d\n", target_freq); - goto err_notpossible; - } - - s3c_freq_dbg("%s: got divs\n", __func__); - - s3c_cpufreq_calc(&cpu_new); - - s3c_freq_dbg("%s: calculated frequencies for new\n", __func__); - - if (cpu_new.freq.hclk != cpu_cur.freq.hclk) { - if (s3c_cpufreq_calcio(&cpu_new) < 0) { - printk(KERN_ERR "%s: no IO timings\n", __func__); - goto err_notpossible; - } - } - - s3c_cpufreq_show("new", &cpu_new); - - /* setup our cpufreq parameters */ - - freqs.old = cpu_cur.freq; - freqs.new = cpu_new.freq; - - freqs.freqs.old = cpu_cur.freq.armclk / 1000; - freqs.freqs.new = cpu_new.freq.armclk / 1000; - - /* update f/h/p clock settings before we issue the change - * notification, so that drivers do not need to do anything - * special if they want to recalculate on CPUFREQ_PRECHANGE. */ - - s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency); - s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk); - s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk); - s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk); - - /* start the frequency change */ - cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_PRECHANGE); - - /* If hclk is staying the same, then we do not need to - * re-write the IO or the refresh timings whilst we are changing - * speed. */ - - local_irq_save(flags); - - /* is our memory clock slowing down? */ - if (cpu_new.freq.hclk < cpu_cur.freq.hclk) { - s3c_cpufreq_setrefresh(&cpu_new); - s3c_cpufreq_setio(&cpu_new); - } - - if (cpu_new.freq.fclk == cpu_cur.freq.fclk) { - /* not changing PLL, just set the divisors */ - - s3c_cpufreq_setdivs(&cpu_new); - } else { - if (cpu_new.freq.fclk < cpu_cur.freq.fclk) { - /* slow the cpu down, then set divisors */ - - s3c_cpufreq_setfvco(&cpu_new); - s3c_cpufreq_setdivs(&cpu_new); - } else { - /* set the divisors, then speed up */ - - s3c_cpufreq_setdivs(&cpu_new); - s3c_cpufreq_setfvco(&cpu_new); - } - } - - /* did our memory clock speed up */ - if (cpu_new.freq.hclk > cpu_cur.freq.hclk) { - s3c_cpufreq_setrefresh(&cpu_new); - s3c_cpufreq_setio(&cpu_new); - } - - /* update our current settings */ - cpu_cur = cpu_new; - - local_irq_restore(flags); - - /* notify everyone we've done this */ - cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_POSTCHANGE); - - s3c_freq_dbg("%s: finished\n", __func__); - return 0; - - err_notpossible: - printk(KERN_ERR "no compatible settings for %d\n", target_freq); - return -EINVAL; -} - -/* s3c_cpufreq_target - * - * called by the cpufreq core to adjust the frequency that the CPU - * is currently running at. - */ - -static int s3c_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_frequency_table *pll; - unsigned int index; - - /* avoid repeated calls which cause a needless amout of duplicated - * logging output (and CPU time as the calculation process is - * done) */ - if (target_freq == last_target) - return 0; - - last_target = target_freq; - - s3c_freq_dbg("%s: policy %p, target %u, relation %u\n", - __func__, policy, target_freq, relation); - - if (ftab) { - if (cpufreq_frequency_table_target(policy, ftab, - target_freq, relation, - &index)) { - s3c_freq_dbg("%s: table failed\n", __func__); - return -EINVAL; - } - - s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__, - target_freq, index, ftab[index].frequency); - target_freq = ftab[index].frequency; - } - - target_freq *= 1000; /* convert target to Hz */ - - /* find the settings for our new frequency */ - - if (!pll_reg || cpu_cur.lock_pll) { - /* either we've not got any PLL values, or we've locked - * to the current one. */ - pll = NULL; - } else { - struct cpufreq_policy tmp_policy; - int ret; - - /* we keep the cpu pll table in Hz, to ensure we get an - * accurate value for the PLL output. */ - - tmp_policy.min = policy->min * 1000; - tmp_policy.max = policy->max * 1000; - tmp_policy.cpu = policy->cpu; - - /* cpufreq_frequency_table_target uses a pointer to 'index' - * which is the number of the table entry, not the value of - * the table entry's index field. */ - - ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg, - target_freq, relation, - &index); - - if (ret < 0) { - printk(KERN_ERR "%s: no PLL available\n", __func__); - goto err_notpossible; - } - - pll = pll_reg + index; - - s3c_freq_dbg("%s: target %u => %u\n", - __func__, target_freq, pll->frequency); - - target_freq = pll->frequency; - } - - return s3c_cpufreq_settarget(policy, target_freq, pll); - - err_notpossible: - printk(KERN_ERR "no compatible settings for %d\n", target_freq); - return -EINVAL; -} - -static unsigned int s3c_cpufreq_get(unsigned int cpu) -{ - return clk_get_rate(clk_arm) / 1000; -} - -struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name) -{ - struct clk *clk; - - clk = clk_get(dev, name); - if (IS_ERR(clk)) - printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name); - - return clk; -} - -static int s3c_cpufreq_init(struct cpufreq_policy *policy) -{ - printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy); - - if (policy->cpu != 0) - return -EINVAL; - - policy->cur = s3c_cpufreq_get(0); - policy->min = policy->cpuinfo.min_freq = 0; - policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000; - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - /* feed the latency information from the cpu driver */ - policy->cpuinfo.transition_latency = cpu_cur.info->latency; - - if (ftab) - cpufreq_frequency_table_cpuinfo(policy, ftab); - - return 0; -} - -static __init int s3c_cpufreq_initclks(void) -{ - _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll"); - _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal"); - clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk"); - clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk"); - clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk"); - clk_arm = s3c_cpufreq_clk_get(NULL, "armclk"); - - if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) || - IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) { - printk(KERN_ERR "%s: could not get clock(s)\n", __func__); - return -ENOENT; - } - - printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__, - clk_get_rate(clk_fclk) / 1000, - clk_get_rate(clk_hclk) / 1000, - clk_get_rate(clk_pclk) / 1000, - clk_get_rate(clk_arm) / 1000); - - return 0; -} - -static int s3c_cpufreq_verify(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - return 0; -} - -#ifdef CONFIG_PM -static struct cpufreq_frequency_table suspend_pll; -static unsigned int suspend_freq; - -static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) -{ - suspend_pll.frequency = clk_get_rate(_clk_mpll); - suspend_pll.index = __raw_readl(S3C2410_MPLLCON); - suspend_freq = s3c_cpufreq_get(0) * 1000; - - return 0; -} - -static int s3c_cpufreq_resume(struct cpufreq_policy *policy) -{ - int ret; - - s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy); - - last_target = ~0; /* invalidate last_target setting */ - - /* first, find out what speed we resumed at. */ - s3c_cpufreq_resume_clocks(); - - /* whilst we will be called later on, we try and re-set the - * cpu frequencies as soon as possible so that we do not end - * up resuming devices and then immediately having to re-set - * a number of settings once these devices have restarted. - * - * as a note, it is expected devices are not used until they - * have been un-suspended and at that time they should have - * used the updated clock settings. - */ - - ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll); - if (ret) { - printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__); - return ret; - } - - return 0; -} -#else -#define s3c_cpufreq_resume NULL -#define s3c_cpufreq_suspend NULL -#endif - -static struct cpufreq_driver s3c24xx_driver = { - .flags = CPUFREQ_STICKY, - .verify = s3c_cpufreq_verify, - .target = s3c_cpufreq_target, - .get = s3c_cpufreq_get, - .init = s3c_cpufreq_init, - .suspend = s3c_cpufreq_suspend, - .resume = s3c_cpufreq_resume, - .name = "s3c24xx", -}; - - -int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info) -{ - if (!info || !info->name) { - printk(KERN_ERR "%s: failed to pass valid information\n", - __func__); - return -EINVAL; - } - - printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n", - info->name); - - /* check our driver info has valid data */ - - BUG_ON(info->set_refresh == NULL); - BUG_ON(info->set_divs == NULL); - BUG_ON(info->calc_divs == NULL); - - /* info->set_fvco is optional, depending on whether there - * is a need to set the clock code. */ - - cpu_cur.info = info; - - /* Note, driver registering should probably update locktime */ - - return 0; -} - -int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) -{ - struct s3c_cpufreq_board *ours; - - if (!board) { - printk(KERN_INFO "%s: no board data\n", __func__); - return -EINVAL; - } - - /* Copy the board information so that each board can make this - * initdata. */ - - ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL); - if (ours == NULL) { - printk(KERN_ERR "%s: no memory\n", __func__); - return -ENOMEM; - } - - *ours = *board; - cpu_cur.board = ours; - - return 0; -} - -int __init s3c_cpufreq_auto_io(void) -{ - int ret; - - if (!cpu_cur.info->get_iotiming) { - printk(KERN_ERR "%s: get_iotiming undefined\n", __func__); - return -ENOENT; - } - - printk(KERN_INFO "%s: working out IO settings\n", __func__); - - ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming); - if (ret) - printk(KERN_ERR "%s: failed to get timings\n", __func__); - - return ret; -} - -/* if one or is zero, then return the other, otherwise return the min */ -#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b)) - -/** - * s3c_cpufreq_freq_min - find the minimum settings for the given freq. - * @dst: The destination structure - * @a: One argument. - * @b: The other argument. - * - * Create a minimum of each frequency entry in the 'struct s3c_freq', - * unless the entry is zero when it is ignored and the non-zero argument - * used. - */ -static void s3c_cpufreq_freq_min(struct s3c_freq *dst, - struct s3c_freq *a, struct s3c_freq *b) -{ - dst->fclk = do_min(a->fclk, b->fclk); - dst->hclk = do_min(a->hclk, b->hclk); - dst->pclk = do_min(a->pclk, b->pclk); - dst->armclk = do_min(a->armclk, b->armclk); -} - -static inline u32 calc_locktime(u32 freq, u32 time_us) -{ - u32 result; - - result = freq * time_us; - result = DIV_ROUND_UP(result, 1000 * 1000); - - return result; -} - -static void s3c_cpufreq_update_loctkime(void) -{ - unsigned int bits = cpu_cur.info->locktime_bits; - u32 rate = (u32)clk_get_rate(_clk_xtal); - u32 val; - - if (bits == 0) { - WARN_ON(1); - return; - } - - val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits; - val |= calc_locktime(rate, cpu_cur.info->locktime_m); - - printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val); - __raw_writel(val, S3C2410_LOCKTIME); -} - -static int s3c_cpufreq_build_freq(void) -{ - int size, ret; - - if (!cpu_cur.info->calc_freqtable) - return -EINVAL; - - kfree(ftab); - ftab = NULL; - - size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0); - size++; - - ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL); - if (!ftab) { - printk(KERN_ERR "%s: no memory for tables\n", __func__); - return -ENOMEM; - } - - ftab_size = size; - - ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size); - s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END); - - return 0; -} - -static int __init s3c_cpufreq_initcall(void) -{ - int ret = 0; - - if (cpu_cur.info && cpu_cur.board) { - ret = s3c_cpufreq_initclks(); - if (ret) - goto out; - - /* get current settings */ - s3c_cpufreq_getcur(&cpu_cur); - s3c_cpufreq_show("cur", &cpu_cur); - - if (cpu_cur.board->auto_io) { - ret = s3c_cpufreq_auto_io(); - if (ret) { - printk(KERN_ERR "%s: failed to get io timing\n", - __func__); - goto out; - } - } - - if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) { - printk(KERN_ERR "%s: no IO support registered\n", - __func__); - ret = -EINVAL; - goto out; - } - - if (!cpu_cur.info->need_pll) - cpu_cur.lock_pll = 1; - - s3c_cpufreq_update_loctkime(); - - s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max, - &cpu_cur.info->max); - - if (cpu_cur.info->calc_freqtable) - s3c_cpufreq_build_freq(); - - ret = cpufreq_register_driver(&s3c24xx_driver); - } - - out: - return ret; -} - -late_initcall(s3c_cpufreq_initcall); - -/** - * s3c_plltab_register - register CPU PLL table. - * @plls: The list of PLL entries. - * @plls_no: The size of the PLL entries @plls. - * - * Register the given set of PLLs with the system. - */ -int __init s3c_plltab_register(struct cpufreq_frequency_table *plls, - unsigned int plls_no) -{ - struct cpufreq_frequency_table *vals; - unsigned int size; - - size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1); - - vals = kmalloc(size, GFP_KERNEL); - if (vals) { - memcpy(vals, plls, size); - pll_reg = vals; - - /* write a terminating entry, we don't store it in the - * table that is stored in the kernel */ - vals += plls_no; - vals->frequency = CPUFREQ_TABLE_END; - - printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no); - } else - printk(KERN_ERR "cpufreq: no memory for PLL tables\n"); - - return vals ? 0 : -ENOMEM; -} diff --git a/arch/arm/mach-s3c24xx/s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h index 548ced42cbb..548ced42cbb 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.h +++ b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c index 663436d9db0..bd064c05c47 100644 --- a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c +++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c @@ -31,7 +31,7 @@ #include <plat/cpu-freq-core.h> #include <plat/clock.h> -#include "s3c2412.h" +#include <mach/s3c2412.h> #define print_ns(x) ((x) / 10), ((x) % 10) diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index aba9e569295..bfe443daf4b 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -21,28 +21,14 @@ static struct stedma40_chan_cfg msp0_dma_rx = { .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, - - .src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0, }; static struct stedma40_chan_cfg msp0_dma_tx = { .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, - - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0, }; struct msp_i2s_platform_data msp0_platform_data = { @@ -53,28 +39,14 @@ struct msp_i2s_platform_data msp0_platform_data = { static struct stedma40_chan_cfg msp1_dma_rx = { .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, - - .src_dev_type = DB8500_DMA_DEV30_MSP3_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV30_MSP3, }; static struct stedma40_chan_cfg msp1_dma_tx = { .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, - - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV30_MSP1_TX, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV30_MSP1, }; struct msp_i2s_platform_data msp1_platform_data = { @@ -85,32 +57,16 @@ struct msp_i2s_platform_data msp1_platform_data = { static struct stedma40_chan_cfg msp2_dma_rx = { .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, - - .src_dev_type = DB8500_DMA_DEV14_MSP2_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - - /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */ - .src_info.psize = STEDMA40_PSIZE_LOG_1, - .dst_info.psize = STEDMA40_PSIZE_LOG_1, - - /* data_width is set during configuration */ + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV14_MSP2, }; static struct stedma40_chan_cfg msp2_dma_tx = { .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, - - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV14_MSP2_TX, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV14_MSP2, .use_fixed_channel = true, .phy_channel = 1, - - /* data_width is set during configuration */ }; static struct platform_device *db8500_add_msp_i2s(struct device *parent, diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 43be3e0d4e3..b3e61a38e5c 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -34,20 +34,14 @@ #ifdef CONFIG_STE_DMA40 struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV29_SD_MM0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV29_SD_MM0, }; static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV29_SD_MM0_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV29_SD_MM0, }; #endif @@ -89,20 +83,14 @@ void mop500_sdi_tc35892_init(struct device *parent) #ifdef CONFIG_STE_DMA40 static struct stedma40_chan_cfg sdi1_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV32_SD_MM1_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV32_SD_MM1, }; static struct stedma40_chan_cfg sdi1_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV32_SD_MM1_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV32_SD_MM1, }; #endif @@ -127,20 +115,14 @@ struct mmci_platform_data mop500_sdi1_data = { #ifdef CONFIG_STE_DMA40 struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV28_SD_MM2_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV28_SD_MM2, }; static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV28_SD_MM2_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV28_SD_MM2, }; #endif @@ -169,20 +151,14 @@ struct mmci_platform_data mop500_sdi2_data = { #ifdef CONFIG_STE_DMA40 struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV42_SD_MM4_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV42_SD_MM4, }; static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV42_SD_MM4_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV42_SD_MM4, }; #endif diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 78389de94dd..df5d27a532e 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -413,47 +413,23 @@ static void mop500_prox_deactivate(struct device *dev) regulator_put(prox_regulator); } -void mop500_snowball_ethernet_clock_enable(void) -{ - struct clk *clk; - - clk = clk_get_sys("fsmc", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); -} - static struct cryp_platform_data u8500_cryp1_platform_data = { .mem_to_engine = { - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV48_CAC1_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV48_CAC1, .mode = STEDMA40_MODE_LOGICAL, - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, }, .engine_to_mem = { - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV48_CAC1_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV48_CAC1, .mode = STEDMA40_MODE_LOGICAL, - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, } }; static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = { - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV50_HAC1_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV50_HAC1_TX, .mode = STEDMA40_MODE_LOGICAL, - .src_info.psize = STEDMA40_PSIZE_LOG_16, - .dst_info.psize = STEDMA40_PSIZE_LOG_16, }; static struct hash_platform_data u8500_hash1_platform_data = { @@ -470,20 +446,14 @@ static struct platform_device *mop500_platform_devs[] __initdata = { #ifdef CONFIG_STE_DMA40 static struct stedma40_chan_cfg ssp0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV8_SSP0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV8_SSP0, }; static struct stedma40_chan_cfg ssp0_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV8_SSP0_TX, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV8_SSP0, }; #endif @@ -511,56 +481,38 @@ static void __init mop500_spi_init(struct device *parent) #ifdef CONFIG_STE_DMA40 static struct stedma40_chan_cfg uart0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV13_UART0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV13_UART0, }; static struct stedma40_chan_cfg uart0_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV13_UART0_TX, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV13_UART0, }; static struct stedma40_chan_cfg uart1_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV12_UART1_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV12_UART1, }; static struct stedma40_chan_cfg uart1_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV12_UART1_TX, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV12_UART1, }; static struct stedma40_chan_cfg uart2_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV11_UART2_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dir = DMA_DEV_TO_MEM, + .dev_type = DB8500_DMA_DEV11_UART2, }; static struct stedma40_chan_cfg uart2_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV11_UART2_TX, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dir = DMA_MEM_TO_DEV, + .dev_type = DB8500_DMA_DEV11_UART2, }; #endif @@ -674,7 +626,7 @@ static void __init snowball_init_machine(void) mop500_audio_init(parent); mop500_uart_init(parent); - mop500_snowball_ethernet_clock_enable(); + u8500_cryp1_hash1_init(parent); /* This board has full regulator constraints */ regulator_has_full_constraints(); diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 49514b82503..d6fab166cbf 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -93,6 +93,7 @@ extern struct amba_pl011_data uart0_plat; extern struct amba_pl011_data uart1_plat; extern struct amba_pl011_data uart2_plat; extern struct pl022_ssp_controller ssp0_plat; +extern struct stedma40_platform_data dma40_plat_data; extern void mop500_sdi_init(struct device *parent); extern void snowball_sdi_init(struct device *parent); @@ -104,7 +105,6 @@ void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); void mop500_audio_init(struct device *parent); -void mop500_snowball_ethernet_clock_enable(void); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 7669a49fb6f..12eee816752 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -162,26 +162,15 @@ static void __init db8500_add_gpios(struct device *parent) dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE); } -static int usb_db8500_rx_dma_cfg[] = { - DB8500_DMA_DEV38_USB_OTG_IEP_1_9, - DB8500_DMA_DEV37_USB_OTG_IEP_2_10, - DB8500_DMA_DEV36_USB_OTG_IEP_3_11, - DB8500_DMA_DEV19_USB_OTG_IEP_4_12, - DB8500_DMA_DEV18_USB_OTG_IEP_5_13, - DB8500_DMA_DEV17_USB_OTG_IEP_6_14, - DB8500_DMA_DEV16_USB_OTG_IEP_7_15, - DB8500_DMA_DEV39_USB_OTG_IEP_8 -}; - -static int usb_db8500_tx_dma_cfg[] = { - DB8500_DMA_DEV38_USB_OTG_OEP_1_9, - DB8500_DMA_DEV37_USB_OTG_OEP_2_10, - DB8500_DMA_DEV36_USB_OTG_OEP_3_11, - DB8500_DMA_DEV19_USB_OTG_OEP_4_12, - DB8500_DMA_DEV18_USB_OTG_OEP_5_13, - DB8500_DMA_DEV17_USB_OTG_OEP_6_14, - DB8500_DMA_DEV16_USB_OTG_OEP_7_15, - DB8500_DMA_DEV39_USB_OTG_OEP_8 +static int usb_db8500_dma_cfg[] = { + DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9, + DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10, + DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11, + DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12, + DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13, + DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14, + DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15, + DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 }; static const char *db8500_read_soc_id(void) @@ -215,7 +204,7 @@ struct device * __init u8500_init_devices(void) db8500_add_rtc(parent); db8500_add_gpios(parent); - db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); + db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg); for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; @@ -226,34 +215,13 @@ struct device * __init u8500_init_devices(void) } #ifdef CONFIG_MACH_UX500_DT - -/* TODO: Once all pieces are DT:ed, remove completely. */ -static struct device * __init u8500_of_init_devices(void) -{ - struct device *parent = db8500_soc_device_init(); - - db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); - - u8500_dma40_device.dev.parent = parent; - - /* - * Devices to be DT:ed: - * u8500_dma40_device = todo - * db8500_pmu_device = done - * db8500_prcmu_device = done - */ - platform_device_register(&u8500_dma40_device); - - return parent; -} - static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ - OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), - OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat), - OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat), + OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL), + OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL), + OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL), OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), @@ -294,6 +262,8 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { "ux500-msp-i2s.2", &msp2_platform_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, "ux500-msp-i2s.3", &msp3_platform_data), + /* Requires clock name bindings and channel address lookup table. */ + OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000, "dma40.0", NULL), {}, }; @@ -317,22 +287,18 @@ static const struct of_device_id u8500_local_bus_nodes[] = { static void __init u8500_init_machine(void) { - struct device *parent = NULL; + struct device *parent = db8500_soc_device_init(); /* Pinmaps must be in place before devices register */ if (of_machine_is_compatible("st-ericsson,mop500")) mop500_pinmaps_init(); else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { snowball_pinmaps_init(); - mop500_snowball_ethernet_clock_enable(); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) hrefv60_pinmaps_init(); else if (of_machine_is_compatible("st-ericsson,ccu9540")) {} /* TODO: Add pinmaps for ccu9540 board. */ - /* TODO: Export SoC, USB, cpu-freq and DMA40 */ - parent = u8500_of_init_devices(); - /* automatically probe child nodes of dbx5x0 devices */ if (of_machine_is_compatible("st-ericsson,u8540")) of_platform_populate(NULL, u8500_local_bus_nodes, diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index ddbdcda8306..516a6f57d15 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -42,128 +42,7 @@ static struct resource dma40_resources[] = { } }; -/* Default configuration for physcial memcpy */ -struct stedma40_chan_cfg dma40_memcpy_conf_phy = { - .mode = STEDMA40_MODE_PHYSICAL, - .dir = STEDMA40_MEM_TO_MEM, - - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .src_info.psize = STEDMA40_PSIZE_PHY_1, - .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - - .dst_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.psize = STEDMA40_PSIZE_PHY_1, - .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, -}; -/* Default configuration for logical memcpy */ -struct stedma40_chan_cfg dma40_memcpy_conf_log = { - .dir = STEDMA40_MEM_TO_MEM, - - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .src_info.psize = STEDMA40_PSIZE_LOG_1, - .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - - .dst_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.psize = STEDMA40_PSIZE_LOG_1, - .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, -}; - -/* - * Mapping between destination event lines and physical device address. - * The event line is tied to a device and therefore the address is constant. - * When the address comes from a primecell it will be configured in runtime - * and we set the address to -1 as a placeholder. - */ -static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = { - /* MUSB - these will be runtime-reconfigured */ - [DB8500_DMA_DEV39_USB_OTG_OEP_8] = -1, - [DB8500_DMA_DEV16_USB_OTG_OEP_7_15] = -1, - [DB8500_DMA_DEV17_USB_OTG_OEP_6_14] = -1, - [DB8500_DMA_DEV18_USB_OTG_OEP_5_13] = -1, - [DB8500_DMA_DEV19_USB_OTG_OEP_4_12] = -1, - [DB8500_DMA_DEV36_USB_OTG_OEP_3_11] = -1, - [DB8500_DMA_DEV37_USB_OTG_OEP_2_10] = -1, - [DB8500_DMA_DEV38_USB_OTG_OEP_1_9] = -1, - /* PrimeCells - run-time configured */ - [DB8500_DMA_DEV0_SPI0_TX] = -1, - [DB8500_DMA_DEV1_SD_MMC0_TX] = -1, - [DB8500_DMA_DEV2_SD_MMC1_TX] = -1, - [DB8500_DMA_DEV3_SD_MMC2_TX] = -1, - [DB8500_DMA_DEV8_SSP0_TX] = -1, - [DB8500_DMA_DEV9_SSP1_TX] = -1, - [DB8500_DMA_DEV11_UART2_TX] = -1, - [DB8500_DMA_DEV12_UART1_TX] = -1, - [DB8500_DMA_DEV13_UART0_TX] = -1, - [DB8500_DMA_DEV28_SD_MM2_TX] = -1, - [DB8500_DMA_DEV29_SD_MM0_TX] = -1, - [DB8500_DMA_DEV32_SD_MM1_TX] = -1, - [DB8500_DMA_DEV33_SPI2_TX] = -1, - [DB8500_DMA_DEV35_SPI1_TX] = -1, - [DB8500_DMA_DEV40_SPI3_TX] = -1, - [DB8500_DMA_DEV41_SD_MM3_TX] = -1, - [DB8500_DMA_DEV42_SD_MM4_TX] = -1, - [DB8500_DMA_DEV43_SD_MM5_TX] = -1, - [DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV48_CAC1_TX] = U8500_CRYP1_BASE + CRYP1_TX_REG_OFFSET, - [DB8500_DMA_DEV50_HAC1_TX] = U8500_HASH1_BASE + HASH1_TX_REG_OFFSET, -}; - -/* Mapping between source event lines and physical device address */ -static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = { - /* MUSB - these will be runtime-reconfigured */ - [DB8500_DMA_DEV39_USB_OTG_IEP_8] = -1, - [DB8500_DMA_DEV16_USB_OTG_IEP_7_15] = -1, - [DB8500_DMA_DEV17_USB_OTG_IEP_6_14] = -1, - [DB8500_DMA_DEV18_USB_OTG_IEP_5_13] = -1, - [DB8500_DMA_DEV19_USB_OTG_IEP_4_12] = -1, - [DB8500_DMA_DEV36_USB_OTG_IEP_3_11] = -1, - [DB8500_DMA_DEV37_USB_OTG_IEP_2_10] = -1, - [DB8500_DMA_DEV38_USB_OTG_IEP_1_9] = -1, - /* PrimeCells */ - [DB8500_DMA_DEV0_SPI0_RX] = -1, - [DB8500_DMA_DEV1_SD_MMC0_RX] = -1, - [DB8500_DMA_DEV2_SD_MMC1_RX] = -1, - [DB8500_DMA_DEV3_SD_MMC2_RX] = -1, - [DB8500_DMA_DEV8_SSP0_RX] = -1, - [DB8500_DMA_DEV9_SSP1_RX] = -1, - [DB8500_DMA_DEV11_UART2_RX] = -1, - [DB8500_DMA_DEV12_UART1_RX] = -1, - [DB8500_DMA_DEV13_UART0_RX] = -1, - [DB8500_DMA_DEV28_SD_MM2_RX] = -1, - [DB8500_DMA_DEV29_SD_MM0_RX] = -1, - [DB8500_DMA_DEV32_SD_MM1_RX] = -1, - [DB8500_DMA_DEV33_SPI2_RX] = -1, - [DB8500_DMA_DEV35_SPI1_RX] = -1, - [DB8500_DMA_DEV40_SPI3_RX] = -1, - [DB8500_DMA_DEV41_SD_MM3_RX] = -1, - [DB8500_DMA_DEV42_SD_MM4_RX] = -1, - [DB8500_DMA_DEV43_SD_MM5_RX] = -1, - [DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV48_CAC1_RX] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET, -}; - -/* Reserved event lines for memcpy only */ -static int dma40_memcpy_event[] = { - DB8500_DMA_MEMCPY_TX_0, - DB8500_DMA_MEMCPY_TX_1, - DB8500_DMA_MEMCPY_TX_2, - DB8500_DMA_MEMCPY_TX_3, - DB8500_DMA_MEMCPY_TX_4, - DB8500_DMA_MEMCPY_TX_5, -}; - -static struct stedma40_platform_data dma40_plat_data = { - .dev_len = DB8500_DMA_NR_DEV, - .dev_rx = dma40_rx_map, - .dev_tx = dma40_tx_map, - .memcpy = dma40_memcpy_event, - .memcpy_len = ARRAY_SIZE(dma40_memcpy_event), - .memcpy_conf_phy = &dma40_memcpy_conf_phy, - .memcpy_conf_log = &dma40_memcpy_conf_log, +struct stedma40_platform_data dma40_plat_data = { .disabled_channels = {-1}, }; diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h index a616419bea7..0296ae5b0fd 100644 --- a/arch/arm/mach-ux500/ste-dma40-db8500.h +++ b/arch/arm/mach-ux500/ste-dma40-db8500.h @@ -12,133 +12,74 @@ #define DB8500_DMA_NR_DEV 64 -enum dma_src_dev_type { - DB8500_DMA_DEV0_SPI0_RX = 0, - DB8500_DMA_DEV1_SD_MMC0_RX = 1, - DB8500_DMA_DEV2_SD_MMC1_RX = 2, - DB8500_DMA_DEV3_SD_MMC2_RX = 3, - DB8500_DMA_DEV4_I2C1_RX = 4, - DB8500_DMA_DEV5_I2C3_RX = 5, - DB8500_DMA_DEV6_I2C2_RX = 6, - DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */ - DB8500_DMA_DEV8_SSP0_RX = 8, - DB8500_DMA_DEV9_SSP1_RX = 9, - DB8500_DMA_DEV10_MCDE_RX = 10, - DB8500_DMA_DEV11_UART2_RX = 11, - DB8500_DMA_DEV12_UART1_RX = 12, - DB8500_DMA_DEV13_UART0_RX = 13, - DB8500_DMA_DEV14_MSP2_RX = 14, - DB8500_DMA_DEV15_I2C0_RX = 15, - DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16, - DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17, - DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18, - DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19, - DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20, - DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21, - DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22, - DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23, - DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24, - DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25, - DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26, - DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27, - DB8500_DMA_DEV28_SD_MM2_RX = 28, - DB8500_DMA_DEV29_SD_MM0_RX = 29, - DB8500_DMA_DEV30_MSP1_RX = 30, +/* + * Unless otherwise specified, all channels numbers are used for + * TX & RX, and can be used for either source or destination + * channels. + */ +enum dma_dev_type { + DB8500_DMA_DEV0_SPI0 = 0, + DB8500_DMA_DEV1_SD_MMC0 = 1, + DB8500_DMA_DEV2_SD_MMC1 = 2, + DB8500_DMA_DEV3_SD_MMC2 = 3, + DB8500_DMA_DEV4_I2C1 = 4, + DB8500_DMA_DEV5_I2C3 = 5, + DB8500_DMA_DEV6_I2C2 = 6, + DB8500_DMA_DEV7_I2C4 = 7, /* Only on V1 and later */ + DB8500_DMA_DEV8_SSP0 = 8, + DB8500_DMA_DEV9_SSP1 = 9, + DB8500_DMA_DEV10_MCDE_RX = 10, /* RX only */ + DB8500_DMA_DEV11_UART2 = 11, + DB8500_DMA_DEV12_UART1 = 12, + DB8500_DMA_DEV13_UART0 = 13, + DB8500_DMA_DEV14_MSP2 = 14, + DB8500_DMA_DEV15_I2C0 = 15, + DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15 = 16, + DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14 = 17, + DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13 = 18, + DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12 = 19, + DB8500_DMA_DEV20_SLIM0_CH0_HSI_CH0 = 20, + DB8500_DMA_DEV21_SLIM0_CH1_HSI_CH1 = 21, + DB8500_DMA_DEV22_SLIM0_CH2_HSI_CH2 = 22, + DB8500_DMA_DEV23_SLIM0_CH3_HSI_CH3 = 23, + DB8500_DMA_DEV24_SXA0 = 24, + DB8500_DMA_DEV25_SXA1 = 25, + DB8500_DMA_DEV26_SXA2 = 26, + DB8500_DMA_DEV27_SXA3 = 27, + DB8500_DMA_DEV28_SD_MM2 = 28, + DB8500_DMA_DEV29_SD_MM0 = 29, + DB8500_DMA_DEV30_MSP1 = 30, /* On DB8500v2, MSP3 RX replaces MSP1 RX */ - DB8500_DMA_DEV30_MSP3_RX = 30, - DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31, - DB8500_DMA_DEV32_SD_MM1_RX = 32, - DB8500_DMA_DEV33_SPI2_RX = 33, - DB8500_DMA_DEV34_I2C3_RX2 = 34, - DB8500_DMA_DEV35_SPI1_RX = 35, - DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36, - DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37, - DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38, - DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39, - DB8500_DMA_DEV40_SPI3_RX = 40, - DB8500_DMA_DEV41_SD_MM3_RX = 41, - DB8500_DMA_DEV42_SD_MM4_RX = 42, - DB8500_DMA_DEV43_SD_MM5_RX = 43, - DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44, - DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45, - DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46, - DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47, - DB8500_DMA_DEV48_CAC1_RX = 48, - /* 49, 50 and 51 are not used */ - DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52, - DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53, - DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54, - DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55, - /* 56, 57, 58, 59 and 60 are not used */ - DB8500_DMA_DEV61_CAC0_RX = 61, - /* 62 and 63 are not used */ -}; - -enum dma_dest_dev_type { - DB8500_DMA_DEV0_SPI0_TX = 0, - DB8500_DMA_DEV1_SD_MMC0_TX = 1, - DB8500_DMA_DEV2_SD_MMC1_TX = 2, - DB8500_DMA_DEV3_SD_MMC2_TX = 3, - DB8500_DMA_DEV4_I2C1_TX = 4, - DB8500_DMA_DEV5_I2C3_TX = 5, - DB8500_DMA_DEV6_I2C2_TX = 6, - DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */ - DB8500_DMA_DEV8_SSP0_TX = 8, - DB8500_DMA_DEV9_SSP1_TX = 9, - /* 10 is not used*/ - DB8500_DMA_DEV11_UART2_TX = 11, - DB8500_DMA_DEV12_UART1_TX = 12, - DB8500_DMA_DEV13_UART0_TX = 13, - DB8500_DMA_DEV14_MSP2_TX = 14, - DB8500_DMA_DEV15_I2C0_TX = 15, - DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16, - DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17, - DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18, - DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19, - DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20, - DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21, - DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22, - DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23, - DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24, - DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25, - DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26, - DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27, - DB8500_DMA_DEV28_SD_MM2_TX = 28, - DB8500_DMA_DEV29_SD_MM0_TX = 29, - DB8500_DMA_DEV30_MSP1_TX = 30, - DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31, - DB8500_DMA_DEV32_SD_MM1_TX = 32, - DB8500_DMA_DEV33_SPI2_TX = 33, - DB8500_DMA_DEV34_I2C3_TX2 = 34, - DB8500_DMA_DEV35_SPI1_TX = 35, - DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36, - DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37, - DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38, - DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39, - DB8500_DMA_DEV40_SPI3_TX = 40, - DB8500_DMA_DEV41_SD_MM3_TX = 41, - DB8500_DMA_DEV42_SD_MM4_TX = 42, - DB8500_DMA_DEV43_SD_MM5_TX = 43, - DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44, - DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45, - DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46, - DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47, - DB8500_DMA_DEV48_CAC1_TX = 48, - DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49, - DB8500_DMA_DEV50_HAC1_TX = 50, - DB8500_DMA_MEMCPY_TX_0 = 51, - DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52, - DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53, - DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54, - DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55, - DB8500_DMA_MEMCPY_TX_1 = 56, - DB8500_DMA_MEMCPY_TX_2 = 57, - DB8500_DMA_MEMCPY_TX_3 = 58, - DB8500_DMA_MEMCPY_TX_4 = 59, - DB8500_DMA_MEMCPY_TX_5 = 60, - DB8500_DMA_DEV61_CAC0_TX = 61, - DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62, - DB8500_DMA_DEV63_HAC0_TX = 63, + DB8500_DMA_DEV30_MSP3 = 30, + DB8500_DMA_DEV31_MSP0_SLIM0_CH0 = 31, + DB8500_DMA_DEV32_SD_MM1 = 32, + DB8500_DMA_DEV33_SPI2 = 33, + DB8500_DMA_DEV34_I2C3_RX2_TX2 = 34, + DB8500_DMA_DEV35_SPI1 = 35, + DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11 = 36, + DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10 = 37, + DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9 = 38, + DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 = 39, + DB8500_DMA_DEV40_SPI3 = 40, + DB8500_DMA_DEV41_SD_MM3 = 41, + DB8500_DMA_DEV42_SD_MM4 = 42, + DB8500_DMA_DEV43_SD_MM5 = 43, + DB8500_DMA_DEV44_SXA4 = 44, + DB8500_DMA_DEV45_SXA5 = 45, + DB8500_DMA_DEV46_SLIM0_CH8_SRC_SXA6 = 46, + DB8500_DMA_DEV47_SLIM0_CH9_SRC_SXA7 = 47, + DB8500_DMA_DEV48_CAC1 = 48, + DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49, /* TX only */ + DB8500_DMA_DEV50_HAC1_TX = 50, /* TX only */ + DB8500_DMA_MEMCPY_TX_0 = 51, /* TX only */ + DB8500_DMA_DEV52_SLIM0_CH4_HSI_CH4 = 52, + DB8500_DMA_DEV53_SLIM0_CH5_HSI_CH5 = 53, + DB8500_DMA_DEV54_SLIM0_CH6_HSI_CH6 = 54, + DB8500_DMA_DEV55_SLIM0_CH7_HSI_CH7 = 55, + /* 56 -> 60 are channels reserved for memcpy only */ + DB8500_DMA_DEV61_CAC0 = 61, + DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62, /* TX only */ + DB8500_DMA_DEV63_HAC0_TX = 63, /* TX only */ }; #endif diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 2dfc72f7cd8..b7bd8d3a550 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -14,25 +14,15 @@ #define MUSB_DMA40_RX_CH { \ .mode = STEDMA40_MODE_LOGICAL, \ - .dir = STEDMA40_PERIPH_TO_MEM, \ - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, \ - .src_info.data_width = STEDMA40_WORD_WIDTH, \ - .dst_info.data_width = STEDMA40_WORD_WIDTH, \ - .src_info.psize = STEDMA40_PSIZE_LOG_16, \ - .dst_info.psize = STEDMA40_PSIZE_LOG_16, \ + .dir = DMA_DEV_TO_MEM, \ } #define MUSB_DMA40_TX_CH { \ .mode = STEDMA40_MODE_LOGICAL, \ - .dir = STEDMA40_MEM_TO_PERIPH, \ - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, \ - .src_info.data_width = STEDMA40_WORD_WIDTH, \ - .dst_info.data_width = STEDMA40_WORD_WIDTH, \ - .src_info.psize = STEDMA40_PSIZE_LOG_16, \ - .dst_info.psize = STEDMA40_PSIZE_LOG_16, \ + .dir = DMA_MEM_TO_DEV, \ } -static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS] +static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = { MUSB_DMA40_RX_CH, MUSB_DMA40_RX_CH, @@ -44,7 +34,7 @@ static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS] MUSB_DMA40_RX_CH }; -static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS] +static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = { MUSB_DMA40_TX_CH, MUSB_DMA40_TX_CH, @@ -56,7 +46,7 @@ static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS] MUSB_DMA40_TX_CH, }; -static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = { +static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = { &musb_dma_rx_ch[0], &musb_dma_rx_ch[1], &musb_dma_rx_ch[2], @@ -67,7 +57,7 @@ static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = { &musb_dma_rx_ch[7] }; -static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = { +static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = { &musb_dma_tx_ch[0], &musb_dma_tx_ch[1], &musb_dma_tx_ch[2], @@ -81,23 +71,11 @@ static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = { static struct ux500_musb_board_data musb_board_data = { .dma_rx_param_array = ux500_dma_rx_param_array, .dma_tx_param_array = ux500_dma_tx_param_array, - .num_rx_channels = UX500_MUSB_DMA_NUM_RX_CHANNELS, - .num_tx_channels = UX500_MUSB_DMA_NUM_TX_CHANNELS, .dma_filter = stedma40_filter, }; -static u64 ux500_musb_dmamask = DMA_BIT_MASK(32); - -static struct musb_hdrc_config musb_hdrc_config = { - .multipoint = true, - .dyn_fifo = true, - .num_eps = 16, - .ram_bits = 16, -}; - static struct musb_hdrc_platform_data musb_platform_data = { .mode = MUSB_OTG, - .config = &musb_hdrc_config, .board_data = &musb_board_data, }; @@ -118,27 +96,26 @@ struct platform_device ux500_musb_device = { .id = 0, .dev = { .platform_data = &musb_platform_data, - .dma_mask = &ux500_musb_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(usb_resources), .resource = usb_resources, }; -static inline void ux500_usb_dma_update_rx_ch_config(int *src_dev_type) +static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type) { u32 idx; - for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++) - musb_dma_rx_ch[idx].src_dev_type = src_dev_type[idx]; + for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++) + musb_dma_rx_ch[idx].dev_type = dev_type[idx]; } -static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type) +static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type) { u32 idx; - for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++) - musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx]; + for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++) + musb_dma_tx_ch[idx].dev_type = dev_type[idx]; } void ux500_add_usb(struct device *parent, resource_size_t base, int irq, diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ce66eb9be48..f82bae2171e 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -86,22 +86,6 @@ config OMAP_MUX_WARNINGS to change the pin multiplexing setup. When there are no warnings printed, it's safe to deselect OMAP_MUX for your product. -config OMAP_MBOX_FWK - tristate "Mailbox framework support" - depends on ARCH_OMAP && !ARCH_MULTIPLATFORM - help - Say Y here if you want to use OMAP Mailbox framework support for - DSP, IVA1.0 and IVA2 in OMAP1/2/3. - -config OMAP_MBOX_KFIFO_SIZE - int "Mailbox kfifo default buffer size (bytes)" - depends on OMAP_MBOX_FWK - default 256 - help - Specify the default size of mailbox's kfifo buffers (bytes). - This can also be changed at runtime (via the mbox_kfifo_size - module parameter). - config OMAP_IOMMU_IVA2 bool diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 31199417b56..0b01b68fd03 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -17,6 +17,3 @@ obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) -# OMAP mailbox framework -obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o - diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h deleted file mode 100644 index cc3921e9059..00000000000 --- a/arch/arm/plat-omap/include/plat/mailbox.h +++ /dev/null @@ -1,105 +0,0 @@ -/* mailbox.h */ - -#ifndef MAILBOX_H -#define MAILBOX_H - -#include <linux/spinlock.h> -#include <linux/workqueue.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/kfifo.h> - -typedef u32 mbox_msg_t; -struct omap_mbox; - -typedef int __bitwise omap_mbox_irq_t; -#define IRQ_TX ((__force omap_mbox_irq_t) 1) -#define IRQ_RX ((__force omap_mbox_irq_t) 2) - -typedef int __bitwise omap_mbox_type_t; -#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1) -#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2) - -struct omap_mbox_ops { - omap_mbox_type_t type; - int (*startup)(struct omap_mbox *mbox); - void (*shutdown)(struct omap_mbox *mbox); - /* fifo */ - mbox_msg_t (*fifo_read)(struct omap_mbox *mbox); - void (*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg); - int (*fifo_empty)(struct omap_mbox *mbox); - int (*fifo_full)(struct omap_mbox *mbox); - /* irq */ - void (*enable_irq)(struct omap_mbox *mbox, - omap_mbox_irq_t irq); - void (*disable_irq)(struct omap_mbox *mbox, - omap_mbox_irq_t irq); - void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - /* ctx */ - void (*save_ctx)(struct omap_mbox *mbox); - void (*restore_ctx)(struct omap_mbox *mbox); -}; - -struct omap_mbox_queue { - spinlock_t lock; - struct kfifo fifo; - struct work_struct work; - struct tasklet_struct tasklet; - struct omap_mbox *mbox; - bool full; -}; - -struct omap_mbox { - char *name; - unsigned int irq; - struct omap_mbox_queue *txq, *rxq; - struct omap_mbox_ops *ops; - struct device *dev; - void *priv; - int use_count; - struct blocking_notifier_head notifier; -}; - -int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg); -void omap_mbox_init_seq(struct omap_mbox *); - -struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb); -void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb); - -int omap_mbox_register(struct device *parent, struct omap_mbox **); -int omap_mbox_unregister(void); - -static inline void omap_mbox_save_ctx(struct omap_mbox *mbox) -{ - if (!mbox->ops->save_ctx) { - dev_err(mbox->dev, "%s:\tno save\n", __func__); - return; - } - - mbox->ops->save_ctx(mbox); -} - -static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox) -{ - if (!mbox->ops->restore_ctx) { - dev_err(mbox->dev, "%s:\tno restore\n", __func__); - return; - } - - mbox->ops->restore_ctx(mbox); -} - -static inline void omap_mbox_enable_irq(struct omap_mbox *mbox, - omap_mbox_irq_t irq) -{ - mbox->ops->enable_irq(mbox, irq); -} - -static inline void omap_mbox_disable_irq(struct omap_mbox *mbox, - omap_mbox_irq_t irq) -{ - mbox->ops->disable_irq(mbox, irq); -} - -#endif /* MAILBOX_H */ diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c deleted file mode 100644 index 42377ef9ea3..00000000000 --- a/arch/arm/plat-omap/mailbox.c +++ /dev/null @@ -1,435 +0,0 @@ -/* - * OMAP mailbox driver - * - * Copyright (C) 2006-2009 Nokia Corporation. All rights reserved. - * - * Contact: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/kfifo.h> -#include <linux/err.h> -#include <linux/notifier.h> -#include <linux/module.h> - -#include <plat/mailbox.h> - -static struct omap_mbox **mboxes; - -static int mbox_configured; -static DEFINE_MUTEX(mbox_configured_lock); - -static unsigned int mbox_kfifo_size = CONFIG_OMAP_MBOX_KFIFO_SIZE; -module_param(mbox_kfifo_size, uint, S_IRUGO); -MODULE_PARM_DESC(mbox_kfifo_size, "Size of omap's mailbox kfifo (bytes)"); - -/* Mailbox FIFO handle functions */ -static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox) -{ - return mbox->ops->fifo_read(mbox); -} -static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) -{ - mbox->ops->fifo_write(mbox, msg); -} -static inline int mbox_fifo_empty(struct omap_mbox *mbox) -{ - return mbox->ops->fifo_empty(mbox); -} -static inline int mbox_fifo_full(struct omap_mbox *mbox) -{ - return mbox->ops->fifo_full(mbox); -} - -/* Mailbox IRQ handle functions */ -static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - if (mbox->ops->ack_irq) - mbox->ops->ack_irq(mbox, irq); -} -static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - return mbox->ops->is_irq(mbox, irq); -} - -/* - * message sender - */ -static int __mbox_poll_for_space(struct omap_mbox *mbox) -{ - int ret = 0, i = 1000; - - while (mbox_fifo_full(mbox)) { - if (mbox->ops->type == OMAP_MBOX_TYPE2) - return -1; - if (--i == 0) - return -1; - udelay(1); - } - return ret; -} - -int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg) -{ - struct omap_mbox_queue *mq = mbox->txq; - int ret = 0, len; - - spin_lock_bh(&mq->lock); - - if (kfifo_avail(&mq->fifo) < sizeof(msg)) { - ret = -ENOMEM; - goto out; - } - - if (kfifo_is_empty(&mq->fifo) && !__mbox_poll_for_space(mbox)) { - mbox_fifo_write(mbox, msg); - goto out; - } - - len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); - WARN_ON(len != sizeof(msg)); - - tasklet_schedule(&mbox->txq->tasklet); - -out: - spin_unlock_bh(&mq->lock); - return ret; -} -EXPORT_SYMBOL(omap_mbox_msg_send); - -static void mbox_tx_tasklet(unsigned long tx_data) -{ - struct omap_mbox *mbox = (struct omap_mbox *)tx_data; - struct omap_mbox_queue *mq = mbox->txq; - mbox_msg_t msg; - int ret; - - while (kfifo_len(&mq->fifo)) { - if (__mbox_poll_for_space(mbox)) { - omap_mbox_enable_irq(mbox, IRQ_TX); - break; - } - - ret = kfifo_out(&mq->fifo, (unsigned char *)&msg, - sizeof(msg)); - WARN_ON(ret != sizeof(msg)); - - mbox_fifo_write(mbox, msg); - } -} - -/* - * Message receiver(workqueue) - */ -static void mbox_rx_work(struct work_struct *work) -{ - struct omap_mbox_queue *mq = - container_of(work, struct omap_mbox_queue, work); - mbox_msg_t msg; - int len; - - while (kfifo_len(&mq->fifo) >= sizeof(msg)) { - len = kfifo_out(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); - WARN_ON(len != sizeof(msg)); - - blocking_notifier_call_chain(&mq->mbox->notifier, len, - (void *)msg); - spin_lock_irq(&mq->lock); - if (mq->full) { - mq->full = false; - omap_mbox_enable_irq(mq->mbox, IRQ_RX); - } - spin_unlock_irq(&mq->lock); - } -} - -/* - * Mailbox interrupt handler - */ -static void __mbox_tx_interrupt(struct omap_mbox *mbox) -{ - omap_mbox_disable_irq(mbox, IRQ_TX); - ack_mbox_irq(mbox, IRQ_TX); - tasklet_schedule(&mbox->txq->tasklet); -} - -static void __mbox_rx_interrupt(struct omap_mbox *mbox) -{ - struct omap_mbox_queue *mq = mbox->rxq; - mbox_msg_t msg; - int len; - - while (!mbox_fifo_empty(mbox)) { - if (unlikely(kfifo_avail(&mq->fifo) < sizeof(msg))) { - omap_mbox_disable_irq(mbox, IRQ_RX); - mq->full = true; - goto nomem; - } - - msg = mbox_fifo_read(mbox); - - len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); - WARN_ON(len != sizeof(msg)); - - if (mbox->ops->type == OMAP_MBOX_TYPE1) - break; - } - - /* no more messages in the fifo. clear IRQ source. */ - ack_mbox_irq(mbox, IRQ_RX); -nomem: - schedule_work(&mbox->rxq->work); -} - -static irqreturn_t mbox_interrupt(int irq, void *p) -{ - struct omap_mbox *mbox = p; - - if (is_mbox_irq(mbox, IRQ_TX)) - __mbox_tx_interrupt(mbox); - - if (is_mbox_irq(mbox, IRQ_RX)) - __mbox_rx_interrupt(mbox); - - return IRQ_HANDLED; -} - -static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox, - void (*work) (struct work_struct *), - void (*tasklet)(unsigned long)) -{ - struct omap_mbox_queue *mq; - - mq = kzalloc(sizeof(struct omap_mbox_queue), GFP_KERNEL); - if (!mq) - return NULL; - - spin_lock_init(&mq->lock); - - if (kfifo_alloc(&mq->fifo, mbox_kfifo_size, GFP_KERNEL)) - goto error; - - if (work) - INIT_WORK(&mq->work, work); - - if (tasklet) - tasklet_init(&mq->tasklet, tasklet, (unsigned long)mbox); - return mq; -error: - kfree(mq); - return NULL; -} - -static void mbox_queue_free(struct omap_mbox_queue *q) -{ - kfifo_free(&q->fifo); - kfree(q); -} - -static int omap_mbox_startup(struct omap_mbox *mbox) -{ - int ret = 0; - struct omap_mbox_queue *mq; - - mutex_lock(&mbox_configured_lock); - if (!mbox_configured++) { - if (likely(mbox->ops->startup)) { - ret = mbox->ops->startup(mbox); - if (unlikely(ret)) - goto fail_startup; - } else - goto fail_startup; - } - - if (!mbox->use_count++) { - ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED, - mbox->name, mbox); - if (unlikely(ret)) { - pr_err("failed to register mailbox interrupt:%d\n", - ret); - goto fail_request_irq; - } - mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet); - if (!mq) { - ret = -ENOMEM; - goto fail_alloc_txq; - } - mbox->txq = mq; - - mq = mbox_queue_alloc(mbox, mbox_rx_work, NULL); - if (!mq) { - ret = -ENOMEM; - goto fail_alloc_rxq; - } - mbox->rxq = mq; - mq->mbox = mbox; - - omap_mbox_enable_irq(mbox, IRQ_RX); - } - mutex_unlock(&mbox_configured_lock); - return 0; - -fail_alloc_rxq: - mbox_queue_free(mbox->txq); -fail_alloc_txq: - free_irq(mbox->irq, mbox); -fail_request_irq: - if (mbox->ops->shutdown) - mbox->ops->shutdown(mbox); - mbox->use_count--; -fail_startup: - mbox_configured--; - mutex_unlock(&mbox_configured_lock); - return ret; -} - -static void omap_mbox_fini(struct omap_mbox *mbox) -{ - mutex_lock(&mbox_configured_lock); - - if (!--mbox->use_count) { - omap_mbox_disable_irq(mbox, IRQ_RX); - free_irq(mbox->irq, mbox); - tasklet_kill(&mbox->txq->tasklet); - flush_work(&mbox->rxq->work); - mbox_queue_free(mbox->txq); - mbox_queue_free(mbox->rxq); - } - - if (likely(mbox->ops->shutdown)) { - if (!--mbox_configured) - mbox->ops->shutdown(mbox); - } - - mutex_unlock(&mbox_configured_lock); -} - -struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb) -{ - struct omap_mbox *_mbox, *mbox = NULL; - int i, ret; - - if (!mboxes) - return ERR_PTR(-EINVAL); - - for (i = 0; (_mbox = mboxes[i]); i++) { - if (!strcmp(_mbox->name, name)) { - mbox = _mbox; - break; - } - } - - if (!mbox) - return ERR_PTR(-ENOENT); - - if (nb) - blocking_notifier_chain_register(&mbox->notifier, nb); - - ret = omap_mbox_startup(mbox); - if (ret) { - blocking_notifier_chain_unregister(&mbox->notifier, nb); - return ERR_PTR(-ENODEV); - } - - return mbox; -} -EXPORT_SYMBOL(omap_mbox_get); - -void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb) -{ - blocking_notifier_chain_unregister(&mbox->notifier, nb); - omap_mbox_fini(mbox); -} -EXPORT_SYMBOL(omap_mbox_put); - -static struct class omap_mbox_class = { .name = "mbox", }; - -int omap_mbox_register(struct device *parent, struct omap_mbox **list) -{ - int ret; - int i; - - mboxes = list; - if (!mboxes) - return -EINVAL; - - for (i = 0; mboxes[i]; i++) { - struct omap_mbox *mbox = mboxes[i]; - mbox->dev = device_create(&omap_mbox_class, - parent, 0, mbox, "%s", mbox->name); - if (IS_ERR(mbox->dev)) { - ret = PTR_ERR(mbox->dev); - goto err_out; - } - - BLOCKING_INIT_NOTIFIER_HEAD(&mbox->notifier); - } - return 0; - -err_out: - while (i--) - device_unregister(mboxes[i]->dev); - return ret; -} -EXPORT_SYMBOL(omap_mbox_register); - -int omap_mbox_unregister(void) -{ - int i; - - if (!mboxes) - return -EINVAL; - - for (i = 0; mboxes[i]; i++) - device_unregister(mboxes[i]->dev); - mboxes = NULL; - return 0; -} -EXPORT_SYMBOL(omap_mbox_unregister); - -static int __init omap_mbox_init(void) -{ - int err; - - err = class_register(&omap_mbox_class); - if (err) - return err; - - /* kfifo size sanity check: alignment and minimal size */ - mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t)); - mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size, - sizeof(mbox_msg_t)); - - return 0; -} -subsys_initcall(omap_mbox_init); - -static void __exit omap_mbox_exit(void) -{ - class_unregister(&omap_mbox_class); -} -module_exit(omap_mbox_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging"); -MODULE_AUTHOR("Toshihiro Kobayashi"); -MODULE_AUTHOR("Hiroshi DOYU"); diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 95509d8eb14..d7e17150028 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -202,7 +202,7 @@ extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void); -#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS #define s3c_cpufreq_debugfs_call(x) x #else #define s3c_cpufreq_debugfs_call(x) NULL @@ -259,17 +259,17 @@ extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, #define s3c2412_iotiming_set NULL #endif /* CONFIG_S3C2412_IOTIMING */ -#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG #define s3c_freq_dbg(x...) printk(KERN_INFO x) #else #define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0) -#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */ +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */ -#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG #define s3c_freq_iodbg(x...) printk(KERN_INFO x) #else #define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0) -#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */ +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */ static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, int index, size_t table_size, diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h index 80c4a809c72..85517ab962a 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h @@ -126,7 +126,7 @@ struct s3c_cpufreq_board { }; /* Things depending on frequency scaling. */ -#ifdef CONFIG_CPU_FREQ_S3C +#ifdef CONFIG_ARM_S3C_CPUFREQ #define __init_or_cpufreq #else #define __init_or_cpufreq __init @@ -134,7 +134,7 @@ struct s3c_cpufreq_board { /* Board functions */ -#ifdef CONFIG_CPU_FREQ_S3C +#ifdef CONFIG_ARM_S3C_CPUFREQ extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board); #else @@ -142,4 +142,4 @@ static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) { return 0; } -#endif /* CONFIG_CPU_FREQ_S3C */ +#endif /* CONFIG_ARM_S3C_CPUFREQ */ |