diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/common/dmabounce.c | 21 | ||||
| -rw-r--r-- | arch/arm/kernel/setup.c | 3 | ||||
| -rw-r--r-- | arch/arm/mm/Kconfig | 7 | ||||
| -rw-r--r-- | arch/arm/mm/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mm/cache-l2x0.c | 104 | ||||
| -rw-r--r-- | arch/arm/mm/consistent.c | 17 | ||||
| -rw-r--r-- | arch/arm/mm/context.c | 12 | ||||
| -rw-r--r-- | arch/arm/mm/proc-v6.S | 14 | ||||
| -rw-r--r-- | arch/arm/mm/tlb-v6.S | 4 |
9 files changed, 163 insertions, 21 deletions
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 2e635b814c1..2362c498f52 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -281,10 +281,14 @@ map_single(struct device *dev, void *ptr, size_t size, ptr = buf->safe; dma_addr = buf->safe_dma_addr; + } else { + /* + * We don't need to sync the DMA buffer since + * it was allocated via the coherent allocators. + */ + consistent_sync(ptr, size, dir); } - consistent_sync(ptr, size, dir); - return dma_addr; } @@ -317,12 +321,12 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, DO_STATS ( device_info->bounce_count++ ); if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) { - unsigned long ptr; + void *ptr = buf->ptr; dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n", - __func__, buf->safe, buf->ptr, size); - memcpy(buf->ptr, buf->safe, size); + __func__, buf->safe, ptr, size); + memcpy(ptr, buf->safe, size); /* * DMA buffers must have the same cache properties @@ -332,8 +336,8 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, * bidirectional case because we know the cache * lines will be coherent with the data written. */ - ptr = (unsigned long)buf->ptr; dmac_clean_range(ptr, ptr + size); + outer_clean_range(__pa(ptr), __pa(ptr) + size); } free_safe_buffer(device_info, buf); } @@ -397,7 +401,10 @@ sync_single(struct device *dev, dma_addr_t dma_addr, size_t size, default: BUG(); } - consistent_sync(buf->safe, size, dir); + /* + * No need to sync the safe buffer - it was allocated + * via the coherent allocators. + */ } else { consistent_sync(dma_to_virt(dev, dma_addr), size, dir); } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index bbab134cd82..243aea45805 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -88,6 +88,9 @@ struct cpu_user_fns cpu_user; #ifdef MULTI_CACHE struct cpu_cache_fns cpu_cache; #endif +#ifdef CONFIG_OUTER_CACHE +struct outer_cache_fns outer_cache; +#endif struct stack { u32 irq[3]; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index aade2f72c92..af3fa9d622f 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -609,3 +609,10 @@ config NEEDS_SYSCALL_FOR_CMPXCHG Forget about fast user space cmpxchg support. It is just not possible. +config OUTER_CACHE + bool + default n + +config CACHE_L2X0 + bool + select OUTER_CACHE diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index d2f5672ecf6..2f8b9594777 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -66,3 +66,5 @@ obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o obj-$(CONFIG_CPU_V6) += proc-v6.o + +obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c new file mode 100644 index 00000000000..08a36f1b35d --- /dev/null +++ b/arch/arm/mm/cache-l2x0.c @@ -0,0 +1,104 @@ +/* + * arch/arm/mm/cache-l2x0.c - L210/L220 cache controller support + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> + +#include <asm/cacheflush.h> +#include <asm/io.h> +#include <asm/hardware/cache-l2x0.h> + +#define CACHE_LINE_SIZE 32 + +static void __iomem *l2x0_base; + +static inline void sync_writel(unsigned long val, unsigned long reg, + unsigned long complete_mask) +{ + writel(val, l2x0_base + reg); + /* wait for the operation to complete */ + while (readl(l2x0_base + reg) & complete_mask) + ; +} + +static inline void cache_sync(void) +{ + sync_writel(0, L2X0_CACHE_SYNC, 1); +} + +static inline void l2x0_inv_all(void) +{ + /* invalidate all ways */ + sync_writel(0xff, L2X0_INV_WAY, 0xff); + cache_sync(); +} + +static void l2x0_inv_range(unsigned long start, unsigned long end) +{ + unsigned long addr; + + start &= ~(CACHE_LINE_SIZE - 1); + for (addr = start; addr < end; addr += CACHE_LINE_SIZE) + sync_writel(addr, L2X0_INV_LINE_PA, 1); + cache_sync(); +} + +static void l2x0_clean_range(unsigned long start, unsigned long end) +{ + unsigned long addr; + + start &= ~(CACHE_LINE_SIZE - 1); + for (addr = start; addr < end; addr += CACHE_LINE_SIZE) + sync_writel(addr, L2X0_CLEAN_LINE_PA, 1); + cache_sync(); +} + +static void l2x0_flush_range(unsigned long start, unsigned long end) +{ + unsigned long addr; + + start &= ~(CACHE_LINE_SIZE - 1); + for (addr = start; addr < end; addr += CACHE_LINE_SIZE) + sync_writel(addr, L2X0_CLEAN_INV_LINE_PA, 1); + cache_sync(); +} + +void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) +{ + __u32 aux; + + l2x0_base = base; + + /* disable L2X0 */ + writel(0, l2x0_base + L2X0_CTRL); + + aux = readl(l2x0_base + L2X0_AUX_CTRL); + aux &= aux_mask; + aux |= aux_val; + writel(aux, l2x0_base + L2X0_AUX_CTRL); + + l2x0_inv_all(); + + /* enable L2X0 */ + writel(1, l2x0_base + L2X0_CTRL); + + outer_cache.inv_range = l2x0_inv_range; + outer_cache.clean_range = l2x0_clean_range; + outer_cache.flush_range = l2x0_flush_range; + + printk(KERN_INFO "L2X0 cache controller enabled\n"); +} diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index 6a9c362fef5..1f9f94f9af4 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -205,9 +205,10 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, * kernel direct-mapped region for device DMA. */ { - unsigned long kaddr = (unsigned long)page_address(page); - memset(page_address(page), 0, size); - dmac_flush_range(kaddr, kaddr + size); + void *ptr = page_address(page); + memset(ptr, 0, size); + dmac_flush_range(ptr, ptr + size); + outer_flush_range(__pa(ptr), __pa(ptr) + size); } /* @@ -480,20 +481,24 @@ core_initcall(consistent_init); * platforms with CONFIG_DMABOUNCE. * Use the driver DMA support - see dma-mapping.h (dma_sync_*) */ -void consistent_sync(void *vaddr, size_t size, int direction) +void consistent_sync(const void *start, size_t size, int direction) { - unsigned long start = (unsigned long)vaddr; - unsigned long end = start + size; + const void *end = start + size; + + BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1)); switch (direction) { case DMA_FROM_DEVICE: /* invalidate only */ dmac_inv_range(start, end); + outer_inv_range(__pa(start), __pa(end)); break; case DMA_TO_DEVICE: /* writeback only */ dmac_clean_range(start, end); + outer_clean_range(__pa(start), __pa(end)); break; case DMA_BIDIRECTIONAL: /* writeback and invalidate */ dmac_flush_range(start, end); + outer_flush_range(__pa(start), __pa(end)); break; default: BUG(); diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 79e80020242..9da43a0fdcd 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -19,7 +19,8 @@ unsigned int cpu_last_asid = { 1 << ASID_BITS }; /* * We fork()ed a process, and we need a new context for the child * to run in. We reserve version 0 for initial tasks so we will - * always allocate an ASID. + * always allocate an ASID. The ASID 0 is reserved for the TTBR + * register changing sequence. */ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) { @@ -38,8 +39,15 @@ void __new_context(struct mm_struct *mm) * If we've used up all our ASIDs, we need * to start a new version and flush the TLB. */ - if ((asid & ~ASID_MASK) == 0) + if ((asid & ~ASID_MASK) == 0) { + asid = ++cpu_last_asid; + /* set the reserved ASID before flushing the TLB */ + asm("mcr p15, 0, %0, c13, c0, 1 @ set reserved context ID\n" + : + : "r" (0)); + isb(); flush_tlb_all(); + } mm->context.id = asid; } diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index f27d9eb6480..eb42e5b9486 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -33,6 +33,12 @@ #define TTB_RGN_WT (2 << 3) #define TTB_RGN_WB (3 << 3) +#ifndef CONFIG_SMP +#define TTB_FLAGS TTB_RGN_WBWA +#else +#define TTB_FLAGS TTB_RGN_WBWA|TTB_S +#endif + ENTRY(cpu_v6_proc_init) mov pc, lr @@ -95,9 +101,7 @@ ENTRY(cpu_v6_switch_mm) #ifdef CONFIG_MMU mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id -#ifdef CONFIG_SMP - orr r0, r0, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable -#endif + orr r0, r0, #TTB_FLAGS mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -206,9 +210,7 @@ __v6_setup: #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register -#ifdef CONFIG_SMP - orr r4, r4, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable -#endif + orr r4, r4, #TTB_FLAGS mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ adr r5, v6_crval diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index fd6adde3909..20f84bbaa9b 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -53,6 +53,8 @@ ENTRY(v6wbi_flush_user_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b + mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB + mcr p15, 0, ip, c7, c10, 4 @ data synchronization barrier mov pc, lr /* @@ -80,7 +82,9 @@ ENTRY(v6wbi_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b + mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier + mcr p15, 0, r2, c7, c5, 4 @ prefetch flush mov pc, lr .section ".text.init", #alloc, #execinstr |