diff options
Diffstat (limited to 'arch/arm')
41 files changed, 153 insertions, 207 deletions
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index b5ac644e12a..6b31cb60daa 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -112,6 +112,7 @@ CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_MFD_MC13XXX=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_FB=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 889d73ac1ae..7e84f453e8a 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_U8500=y -CONFIG_UX500_SOC_DB5500=y -CONFIG_UX500_SOC_DB8500=y CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y @@ -39,7 +37,6 @@ CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_MISC_DEVICES=y CONFIG_AB8500_PWM=y CONFIG_SENSORS_BH1780=y CONFIG_NETDEVICES=y @@ -65,16 +62,18 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_NOMADIK=y -CONFIG_I2C=y -CONFIG_I2C_NOMADIK=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y +CONFIG_POWER_SUPPLY=y +CONFIG_AB8500_BM=y +CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB5500_CORE=y CONFIG_AB8500_CORE=y +CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set CONFIG_USB_GADGET=y diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index d9f0d770978..99affb5d056 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1162,7 +1162,6 @@ void __init at91_add_device_serial(void) } } #else -void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index dd7f782b0b9..104ca40d8d1 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/clockchips.h> +#include <linux/export.h> #include <asm/mach/time.h> @@ -176,6 +177,7 @@ static struct clock_event_device clkevt = { }; void __iomem *at91_st_base; +EXPORT_SYMBOL_GPL(at91_st_base); void __init at91rm9200_ioremap_st(u32 addr) { diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 78ffc8315f9..2b15b8adec4 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -103,7 +103,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = { }; #define EK_FLASH_BASE AT91_CHIPSELECT_0 -#define EK_FLASH_SIZE SZ_2M +#define EK_FLASH_SIZE SZ_8M static struct physmap_flash_data ek_flash_data = { .width = 2, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 065b5ee3507..2736453821b 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -76,8 +76,6 @@ static struct resource dm9000_resource[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = AT91_PIN_PC11, - .end = AT91_PIN_PC11, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE, } @@ -121,6 +119,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = { static void __init ek_add_device_dm9000(void) { + struct resource *r = &dm9000_resource[2]; + /* Configure chip-select 2 (DM9000) */ sam9_smc_configure(0, 2, &dm9000_smc_config); @@ -130,6 +130,7 @@ static void __init ek_add_device_dm9000(void) /* Configure Interrupt pin as input, no pull-up */ at91_set_gpio_input(AT91_PIN_PC11, 0); + r->start = r->end = gpio_to_irq(AT91_PIN_PC11); platform_device_register(&dm9000_device); } #else diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index a0f4d7424cd..6b692824c98 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -35,6 +35,7 @@ #include "generic.h" void __iomem *at91_pmc_base; +EXPORT_SYMBOL_GPL(at91_pmc_base); /* * There's a lot more which can be done with clocks, including cpufreq diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 36604782a78..ea2c57a86ca 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base; #define at91_pmc_write(field, value) \ __raw_writel(value, at91_pmc_base + field) #else -.extern at91_aic_base +.extern at91_pmc_base #endif #define AT91_PMC_SCER 0x00 /* System Clock Enable Register */ diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 97cc04dc807..f44a2e7272e 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority) } void __iomem *at91_ramc_base[2]; +EXPORT_SYMBOL_GPL(at91_ramc_base); void __init at91_ioremap_ramc(int id, u32 addr, u32 size) { @@ -292,6 +293,7 @@ void __init at91_ioremap_rstc(u32 base_addr) } void __iomem *at91_matrix_base; +EXPORT_SYMBOL_GPL(at91_matrix_base); void __init at91_ioremap_matrix(u32 base_addr) { diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 22e4e0a28ad..adbfb199458 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -52,8 +52,8 @@ #include <mach/csp/chipcHw_inline.h> #include <mach/csp/tmrHw_reg.h> -static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL); -static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL); +static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL); +static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL); static struct clk pll1_clk = { .name = "PLL1", diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 7561eca131b..f72d399ff3d 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -571,8 +571,10 @@ config MACH_MX35_3DS select MXC_DEBUG_BOARD select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 5f2f91d1798..b46cab0ced5 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -243,7 +243,7 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __maybe_unused ads7846_dev_init(void) { if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) { - printk(KERN_ERR "can't get ads746 pen down GPIO\n"); + printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); return; } gpio_direction_input(ADS7846_PENDOWN); diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 861ceb8232d..ed38d03c61f 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -35,7 +35,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { static int __init imx27_avic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - irq_domain_add_simple(np, 0); + irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL); return 0; } @@ -44,7 +44,9 @@ static int __init imx27_gpio_add_irq_domain(struct device_node *np, { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - irq_domain_add_simple(np, gpio_irq_base); + gpio_irq_base -= 32; + irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, + NULL); return 0; } diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 8ecc872b254..c515f8ede1a 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -194,7 +194,7 @@ static void __init eukrea_cpuimx35_timer_init(void) mx35_clocks_init(); } -struct sys_timer eukrea_cpuimx35_timer = { +static struct sys_timer eukrea_cpuimx35_timer = { .init = eukrea_cpuimx35_timer_init, }; diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 97046088ff1..7274e792813 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -134,7 +134,7 @@ static void __init mx1ads_timer_init(void) mx1_clocks_init(32000); } -struct sys_timer mx1ads_timer = { +static struct sys_timer mx1ads_timer = { .init = mx1ads_timer_init, }; diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index 0abef5f13df..686c6058798 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -283,7 +283,7 @@ static void __init mx31lite_timer_init(void) mx31_clocks_init(26000000); } -struct sys_timer mx31lite_timer = { +static struct sys_timer mx31lite_timer = { .init = mx31lite_timer_init, }; diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index f17a15f2831..1dfe3c7a7be 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -580,7 +580,7 @@ static void __init mx31moboard_timer_init(void) mx31_clocks_init(26000000); } -struct sys_timer mx31moboard_timer = { +static struct sys_timer mx31moboard_timer = { .init = mx31moboard_timer_init, }; diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 6ae51c6b95b..c433187988a 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -419,7 +419,7 @@ static void __init mx35pdk_timer_init(void) mx35_clocks_init(); } -struct sys_timer mx35pdk_timer = { +static struct sys_timer mx35pdk_timer = { .init = mx35pdk_timer_init, }; diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 5fddf94cc96..10c9795934a 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -683,7 +683,7 @@ static void __init pcm037_timer_init(void) mx31_clocks_init(26000000); } -struct sys_timer pcm037_timer = { +static struct sys_timer pcm037_timer = { .init = pcm037_timer_init, }; diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 237474fcca2..73585f55cca 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -399,7 +399,7 @@ static void __init pcm043_timer_init(void) mx35_clocks_init(); } -struct sys_timer pcm043_timer = { +static struct sys_timer pcm043_timer = { .init = pcm043_timer_init, }; diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 033257e553e..add8c69c6c1 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -310,7 +310,7 @@ static void __init vpr200_timer_init(void) mx35_clocks_init(); } -struct sys_timer vpr200_timer = { +static struct sys_timer vpr200_timer = { .init = vpr200_timer_init, }; diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index 05250aed61f..e10f3914fcf 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -35,7 +35,7 @@ static void imx5_idle(void) } clk_enable(gpc_dvfs_clk); mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - if (tzic_enable_wake() != 0) + if (!tzic_enable_wake()) cpu_do_idle(); clk_disable(gpc_dvfs_clk); } diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 087dba0df47..e9cc52d4cb2 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -27,6 +27,7 @@ #include <linux/io.h> #include <linux/spinlock.h> +#include <mach/hardware.h> #include <plat/mux.h> diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index 6e90665a7c4..fb202af01d0 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -47,9 +47,9 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev, int n = (pdev->id - 1) << 1; u32 l; - l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); + l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); l |= source << n; - __raw_writel(l, MOD_CONF_CTRL_1); + omap_writel(l, MOD_CONF_CTRL_1); return 0; } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index a39fc4bbd2b..130ab00c09a 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -20,6 +20,7 @@ #include <linux/usb/otg.h> #include <linux/spi/spi.h> #include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> #include <linux/gpio_keys.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = { }, }; -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_vibra_data twl6040_vibra = { +static struct twl6040_vibra_data twl6040_vibra = { .vibldrv_res = 8, .vibrdrv_res = 3, .viblmotor_res = 10, @@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = { .vddvibr_uV = 0, /* fixed volt supply - VBAT */ }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .vibra = &twl6040_vibra, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { - .audio = &twl6040_audio, /* Regulators */ .vusim = &sdp4430_vusim, .vaux1 = &sdp4430_vaux1, @@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 74e1687b517..098d183a008 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = { static void __init omap4_i2c_init(void) { - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0); } static void __init omap4_init(void) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index d8c0e89f012..1b782ba5343 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/usb/otg.h> #include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/wl12xx.h> @@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; /* Panda board uses the common PMIC configuration */ -static struct twl4030_platform_data omap4_panda_twldata = { - .audio = &twl6040_audio, -}; +static struct twl4030_platform_data omap4_panda_twldata; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &omap4_panda_twldata); + omap4_pmic_init("twl6030", &omap4_panda_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2c27fdb61e6..7144ae651d3 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh) goto dis_opt_clks; _write_sysconfig(v, oh); + if (oh->class->sysc->srst_udelay) + udelay(oh->class->sysc->srst_udelay); + if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) @@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs) */ int omap_hwmod_softreset(struct omap_hwmod *oh) { - if (!oh) + u32 v; + int ret; + + if (!oh || !(oh->_sysc_cache)) return -EINVAL; - return _ocp_softreset(oh); + v = oh->_sysc_cache; + ret = _set_softreset(oh, &v); + if (ret) + goto error; + _write_sysconfig(v, oh); + +error: + return ret; } /** diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a5409ce3f32..a6bde34e443 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c4f56cb60d7..04a3885f447 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { .slave = &omap2430_dss_venc_hwmod, .clk = "dss_ick", .addr = omap2_dss_venc_addrs, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 34b9766d1d2..db86ce90c69 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index cc9bd106a85..6abc75753e4 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = { static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, + /* + * ISS needs 100 OCP clk cycles delay after a softreset before + * accessing sysconfig again. + * The lowest frequency at the moment for L3 bus is 100 MHz, so + * 1usec delay is needed. Add an x2 margin to be safe (2 usecs). + * + * TODO: Indicate errata when available. + */ + .srst_udelay = 2, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0cdd359a128..9fc2f44188c 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev) static void omap_uart_set_smartidle(struct platform_device *pdev) { struct omap_device *od = to_omap_device(pdev); + u8 idlemode; - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); + if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + + omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); } #else @@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static struct omap_device_pad default_uart1_pads[] __initdata = { - { - .name = "uart1_cts.uart1_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rts.uart1_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_tx.uart1_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rx.uart1_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart2_pads[] __initdata = { - { - .name = "uart2_cts.uart2_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rts.uart2_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_tx.uart2_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rx.uart2_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart3_pads[] __initdata = { - { - .name = "uart3_cts_rctx.uart3_cts_rctx", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rts_sd.uart3_rts_sd", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_tx_irtx.uart3_tx_irtx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rx_irrx.uart3_rx_irrx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = { - { - .name = "gpmc_wait2.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "gpmc_wait3.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - }, -}; - -static struct omap_device_pad default_omap4_uart4_pads[] __initdata = { - { - .name = "uart4_tx.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart4_rx.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - static void omap_serial_fill_default_pads(struct omap_board_data *bdata) { - switch (bdata->id) { - case 0: - bdata->pads = default_uart1_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads); - break; - case 1: - bdata->pads = default_uart2_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads); - break; - case 2: - bdata->pads = default_uart3_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads); - break; - case 3: - if (cpu_is_omap44xx()) { - bdata->pads = default_omap4_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap4_uart4_pads); - } else if (cpu_is_omap3630()) { - bdata->pads = default_omap36xx_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap36xx_uart4_pads); - } - break; - default: - break; - } } #else static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 4b57757bf9d..7a7b89304c4 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = { .flags = I2C_CLIENT_WAKE, }; +static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { + { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, + }, + { + I2C_BOARD_INFO("twl6040", 0x4b), + }, +}; + void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) @@ -49,14 +59,31 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *twl6040_data, int twl6040_irq) +{ + /* PMIC part*/ + strncpy(omap4_i2c1_board_info[0].type, pmic_type, + sizeof(omap4_i2c1_board_info[0].type)); + omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; + omap4_i2c1_board_info[0].platform_data = pmic_data; + + /* TWL6040 audio IC part */ + omap4_i2c1_board_info[1].irq = twl6040_irq; + omap4_i2c1_board_info[1].platform_data = twl6040_data; + + omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2); + +} + void __init omap_pmic_late_init(void) { /* Init the OMAP TWL parameters (if PMIC has been registerd) */ - if (!pmic_i2c_board_info.irq) - return; - - omap3_twl_init(); - omap4_twl_init(); + if (pmic_i2c_board_info.irq) + omap3_twl_init(); + if (omap4_i2c1_board_info[0].irq) + omap4_twl_init(); } #if defined(CONFIG_ARCH_OMAP3) diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 275dde8cb27..09627483a57 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -29,6 +29,7 @@ struct twl4030_platform_data; +struct twl6040_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); @@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type, omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); } -static inline void omap4_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ - omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); -} +void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *audio_data, int twl6040_irq); void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 880d02ec89d..ef7099eea0f 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -17,6 +17,7 @@ config UX500_SOC_DB5500 config UX500_SOC_DB8500 bool select MFD_DB8500_PRCMU + select REGULATOR select REGULATOR_DB8500_PRCMU select CPU_FREQ_TABLE if CPU_FREQ diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index d2058ef8345..eff5842f623 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -99,7 +99,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) */ write_pen_release(cpu_logical_map(cpu)); - gic_raise_softirq(cpumask_of(cpu), 1); + smp_send_reschedule(cpu); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h index c7f5169a6a5..36c8989d9de 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -256,13 +256,13 @@ #define MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL) #define MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2) #define MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 7, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 0x17, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL) @@ -270,7 +270,7 @@ #define MX51_PAD_NANDF_RB3__GPIO3_11 IOMUX_PAD(0x504, 0x128, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_RB3__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB3__USBH3_CLK IOMUX_PAD(0x504, 0x128, 6, 0x9f8, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 7, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 0x17, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO_NAND__GPIO_NAND IOMUX_PAD(0x514, 0x12c, 0, 0x998, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO_NAND__PATA_INTRQ IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS0__GPIO3_16 IOMUX_PAD(0x518, 0x130, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) @@ -283,13 +283,13 @@ #define MX51_PAD_NANDF_CS2__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS2__PATA_CS_0 IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS2__SD4_CLK IOMUX_PAD(0x520, 0x138, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS) -#define MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 7, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 0x17, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13c, 2, __NA_, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS3__GPIO3_19 IOMUX_PAD(0x524, 0x13c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_CS3__NANDF_CS3 IOMUX_PAD(0x524, 0x13c, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS3__PATA_CS_1 IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS3__SD4_DAT0 IOMUX_PAD(0x524, 0x13c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 7, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 0x17, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS4__FEC_TDATA1 IOMUX_PAD(0x528, 0x140, 2, __NA_, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS4__GPIO3_20 IOMUX_PAD(0x528, 0x140, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_CS4__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 0, __NA_, 0, NO_PAD_CTRL) @@ -316,7 +316,7 @@ #define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4) #define MX51_PAD_NANDF_RDY_INT__GPIO3_24 IOMUX_PAD(0x538, 0x150, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 0, 0x938, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL) #define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53c, 0x154, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_NANDF_D15__GPIO3_25 IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_D15__NANDF_D15 IOMUX_PAD(0x53c, 0x154, 0, __NA_, 0, NO_PAD_CTRL) @@ -672,23 +672,23 @@ #define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT6__DISP2_DAT6 IOMUX_PAD(0x774, 0x36c, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT6__FEC_TDATA1 IOMUX_PAD(0x774, 0x36c, 2, __NA_, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_DISP2_DAT6__KEY_ROW4 IOMUX_PAD(0x774, 0x36c, 4, 0x9d0, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT6__USBH3_STP IOMUX_PAD(0x774, 0x36c, 3, 0xa24, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT7__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT7__FEC_TDATA2 IOMUX_PAD(0x778, 0x370, 2, __NA_, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_DISP2_DAT7__KEY_ROW5 IOMUX_PAD(0x778, 0x370, 4, 0x9d4, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT7__USBH3_NXT IOMUX_PAD(0x778, 0x370, 3, 0xa20, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT8__DISP2_DAT8 IOMUX_PAD(0x77c, 0x374, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT8__FEC_TDATA3 IOMUX_PAD(0x77c, 0x374, 2, __NA_, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_DISP2_DAT8__KEY_ROW6 IOMUX_PAD(0x77c, 0x374, 4, 0x9d8, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT8__USBH3_DATA0 IOMUX_PAD(0x77c, 0x374, 3, 0x9fc, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT9__AUD6_RXC IOMUX_PAD(0x780, 0x378, 4, 0x8f4, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT9__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT9__FEC_TX_EN IOMUX_PAD(0x780, 0x378, 2, __NA_, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_DISP2_DAT9__USBH3_DATA1 IOMUX_PAD(0x780, 0x378, 3, 0xa00, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37c, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT10__DISP2_SER_CS IOMUX_PAD(0x784, 0x37c, 5, __NA_, 0, NO_PAD_CTRL) @@ -698,7 +698,7 @@ #define MX51_PAD_DISP2_DAT11__AUD6_TXD IOMUX_PAD(0x788, 0x380, 4, 0x8f0, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT11__FEC_RX_CLK IOMUX_PAD(0x788, 0x380, 2, 0x968, 1, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_DISP2_DAT11__USBH3_DATA3 IOMUX_PAD(0x788, 0x380, 3, 0xa08, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT12__AUD6_RXD IOMUX_PAD(0x78c, 0x384, 4, 0x8ec, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78c, 0x384, 0, __NA_, 0, NO_PAD_CTRL) @@ -746,16 +746,16 @@ #define MX51_PAD_SD1_DATA3__CSPI_SS1 IOMUX_PAD(0x7b0, 0x3a8, 2, 0x920, 1, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL) #define MX51_PAD_GPIO1_0__CSPI_SS2 IOMUX_PAD(0x7b4, 0x3ac, 2, 0x924, 0, MX51_ECSPI_PAD_CTRL) -#define MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_0__SD1_CD IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL) #define MX51_PAD_GPIO1_1__CSPI_MISO IOMUX_PAD(0x7b8, 0x3b0, 2, 0x918, 2, MX51_ECSPI_PAD_CTRL) -#define MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_1__SD1_WP IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL) #define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(__NA_, 0x04c, 0, 0x000, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(__NA_, 0x050, 0, 0x000, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(__NA_, 0x054, 0, 0x000, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(__NA_, 0x058, 0, 0x000, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(__NA_, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x7bc, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_SD2_CMD__I2C1_SCL IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x9b0, 2, MX51_I2C_PAD_CTRL) #define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL) #define MX51_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x7c0, 0x3b8, 2, 0x914, 3, MX51_ECSPI_PAD_CTRL) @@ -766,19 +766,19 @@ #define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL) #define MX51_PAD_SD2_DATA1__SD1_DAT5 IOMUX_PAD(0x7c8, 0x3c0, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 2, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 0x12, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_SD2_DATA2__SD1_DAT6 IOMUX_PAD(0x7cc, 0x3c4, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 2, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 0x12, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x7d0, 0x3c8, 2, 0x924, 1, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_SD2_DATA3__SD1_DAT7 IOMUX_PAD(0x7d0, 0x3c8, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL) #define MX51_PAD_GPIO1_2__CCM_OUT_2 IOMUX_PAD(0x7d4, 0x3cc, 5, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_2__I2C2_SCL IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x9b8, 3, MX51_I2C_PAD_CTRL) #define MX51_PAD_GPIO1_2__PLL1_BYP IOMUX_PAD(0x7d4, 0x3cc, 7, 0x90c, 1, NO_PAD_CTRL) #define MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL) #define MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL) #define MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL) @@ -786,27 +786,27 @@ #define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B IOMUX_PAD(0x7fc, 0x3d4, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_4__DISP2_EXT_CLK IOMUX_PAD(0x804, 0x3d8, 4, 0x908, 1, NO_PAD_CTRL) #define MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL) #define MX51_PAD_GPIO1_7__SPDIF_OUT1 IOMUX_PAD(0x810, 0x3e4, 2, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_8__CSI2_DATA_EN IOMUX_PAD(0x814, 0x3e8, 2, 0x99c, 2, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL) #define MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h index 527f8fe3e31..9761e003bde 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h @@ -573,7 +573,7 @@ #define MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL) #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL) #define MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, PAD_CTRL_I2C) +#define MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL) #define MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL) #define MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL) #define MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL) @@ -1187,7 +1187,7 @@ #define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL) #define MX53_PAD_GPIO_8__GPIO1_8 IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL) #define MX53_PAD_GPIO_8__EPIT2_EPITO IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, NO_PAD_CTRL) +#define MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 2, NO_PAD_CTRL) #define MX53_PAD_GPIO_8__UART2_RXD_MUX IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL) #define MX53_PAD_GPIO_8__FIRI_TXD IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL) #define MX53_PAD_GPIO_8__SPDIF_SRCLK IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 8070145ccb9..3f26db4ee8e 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -305,6 +305,7 @@ struct omap_hwmod_sysc_fields { * @rev_offs: IP block revision register offset (from module base addr) * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr) * @syss_offs: OCP_SYSSTATUS register offset (from module base addr) + * @srst_udelay: Delay needed after doing a softreset in usecs * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART} * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported * @clockact: the default value of the module CLOCKACTIVITY bits @@ -330,9 +331,10 @@ struct omap_hwmod_class_sysconfig { u16 sysc_offs; u16 syss_offs; u16 sysc_flags; + struct omap_hwmod_sysc_fields *sysc_fields; + u8 srst_udelay; u8 idlemodes; u8 clockact; - struct omap_hwmod_sysc_fields *sysc_fields; }; /** diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index eec98afa0f8..f9a8c5341ee 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -348,7 +348,6 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, sdrc_actim_ctrl_b_1, sdrc_mr_1); } -#ifdef CONFIG_PM void omap3_sram_restore_context(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; @@ -358,17 +357,18 @@ void omap3_sram_restore_context(void) omap3_sram_configure_core_dpll_sz); omap_push_sram_idle(); } -#endif /* CONFIG_PM */ - -#endif /* CONFIG_ARCH_OMAP3 */ static inline int omap34xx_sram_init(void) { -#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) omap3_sram_restore_context(); -#endif return 0; } +#else +static inline int omap34xx_sram_init(void) +{ + return 0; +} +#endif /* CONFIG_ARCH_OMAP3 */ static inline int am33xx_sram_init(void) { |