diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/configs/omap_ldp_defconfig | 24 | ||||
| -rw-r--r-- | arch/arm/configs/pcm037_defconfig | 23 | ||||
| -rw-r--r-- | arch/arm/configs/realview-smp_defconfig | 24 | ||||
| -rw-r--r-- | arch/arm/configs/realview_defconfig | 24 | ||||
| -rw-r--r-- | arch/arm/include/asm/spinlock.h | 3 | ||||
| -rw-r--r-- | arch/arm/kernel/process.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-at91/pm.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-gemini/include/mach/system.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mmp/include/mach/system.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mx3/pcm037.c | 23 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-ldp.c | 47 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-overo.c | 65 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/pcm990-baseboard.c | 53 | ||||
| -rw-r--r-- | arch/arm/mach-realview/core.c | 17 | ||||
| -rw-r--r-- | arch/arm/mach-realview/localtimer.c | 1 | ||||
| -rw-r--r-- | arch/arm/mm/abort-ev6.S | 4 | ||||
| -rw-r--r-- | arch/arm/mm/cache-feroceon-l2.c | 9 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/mx3_camera.h | 52 | ||||
| -rw-r--r-- | arch/arm/vfp/entry.S | 23 | ||||
| -rw-r--r-- | arch/arm/vfp/vfphw.S | 12 | ||||
| -rw-r--r-- | arch/arm/vfp/vfpmodule.c | 6 |
22 files changed, 356 insertions, 70 deletions
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig index aa9d34feddc..679a4a3e265 100644 --- a/arch/arm/configs/omap_ldp_defconfig +++ b/arch/arm/configs/omap_ldp_defconfig @@ -474,14 +474,34 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set -CONFIG_SMC911X=y +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig index 62747458647..6e37c77c476 100644 --- a/arch/arm/configs/pcm037_defconfig +++ b/arch/arm/configs/pcm037_defconfig @@ -465,12 +465,33 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index cd29824d791..21db4b3ec8f 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -496,13 +496,33 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set -CONFIG_SMC911X=y +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index 7e253f58ed1..9a75c30b910 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -490,13 +490,33 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set -CONFIG_SMC911X=y +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index 2b41ebbfa7f..c13681ac1ed 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -217,6 +217,9 @@ static inline int __raw_read_trylock(raw_rwlock_t *rw) /* read_can_lock - would read_trylock() succeed? */ #define __raw_read_can_lock(x) ((x)->lock < 0x80000000) +#define __raw_read_lock_flags(lock, flags) __raw_read_lock(lock) +#define __raw_write_lock_flags(lock, flags) __raw_write_lock(lock) + #define _raw_spin_relax(lock) cpu_relax() #define _raw_read_relax(lock) cpu_relax() #define _raw_write_relax(lock) cpu_relax() diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 2de14e2afdc..c3265a2e7cd 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -301,7 +301,7 @@ void release_thread(struct task_struct *dead_task) asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); int -copy_thread(int nr, unsigned long clone_flags, unsigned long stack_start, +copy_thread(unsigned long clone_flags, unsigned long stack_start, unsigned long stk_sz, struct task_struct *p, struct pt_regs *regs) { struct thread_info *thread = task_thread_info(p); diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 7ac812dc055..e26c4fe61fa 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -198,17 +198,17 @@ static int at91_pm_verify_clocks(void) /* USB must not be using PLLB */ if (cpu_is_at91rm9200()) { if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) { - pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); + pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); return 0; } } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) { if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) { - pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); + pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); return 0; } } else if (cpu_is_at91cap9()) { if ((scsr & AT91CAP9_PMC_UHP) != 0) { - pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); + pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); return 0; } } @@ -223,7 +223,7 @@ static int at91_pm_verify_clocks(void) css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS; if (css != AT91_PMC_CSS_SLOW) { - pr_debug("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css); + pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css); return 0; } } diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h index bbbd72767a0..4d9c1f87247 100644 --- a/arch/arm/mach-gemini/include/mach/system.h +++ b/arch/arm/mach-gemini/include/mach/system.h @@ -28,7 +28,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { __raw_writel(RESET_GLOBAL | RESET_CPU1, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET); diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h index 001edfefec1..4f5b0e0ce6c 100644 --- a/arch/arm/mach-mmp/include/mach/system.h +++ b/arch/arm/mach-mmp/include/mach/system.h @@ -14,7 +14,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { cpu_reset(0); } diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index 5fce022114d..c3648eff513 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -24,7 +24,7 @@ #include <linux/mtd/plat-ram.h> #include <linux/memory.h> #include <linux/gpio.h> -#include <linux/smc911x.h> +#include <linux/smsc911x.h> #include <linux/interrupt.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> @@ -70,7 +70,7 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct resource smc911x_resources[] = { +static struct resource smsc911x_resources[] = { [0] = { .start = CS1_BASE_ADDR + 0x300, .end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1, @@ -79,22 +79,25 @@ static struct resource smc911x_resources[] = { [1] = { .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; -static struct smc911x_platdata smc911x_info = { - .flags = SMC911X_USE_32BIT, - .irq_flags = IRQF_SHARED | IRQF_TRIGGER_LOW, +static struct smsc911x_platform_config smsc911x_info = { + .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY | + SMSC911X_SAVE_MAC_ADDRESS, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .phy_interface = PHY_INTERFACE_MODE_MII, }; static struct platform_device pcm037_eth = { - .name = "smc911x", + .name = "smsc911x", .id = -1, - .num_resources = ARRAY_SIZE(smc911x_resources), - .resource = smc911x_resources, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, .dev = { - .platform_data = &smc911x_info, + .platform_data = &smsc911x_info, }, }; diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index a2c3fcc27a2..c49d9bfa3ab 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -47,6 +47,8 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ board-rx51-peripherals.o \ + mmc-twl4030.o + # Platform specific device init code ifeq ($(CONFIG_USB_MUSB_SOC),y) obj-y += usb-musb.o diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index e096f776f99..da57b0fcda1 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -23,6 +23,7 @@ #include <linux/spi/ads7846.h> #include <linux/i2c/twl4030.h> #include <linux/io.h> +#include <linux/smsc911x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -41,12 +42,12 @@ #include "mmc-twl4030.h" -#define LDP_SMC911X_CS 1 -#define LDP_SMC911X_GPIO 152 +#define LDP_SMSC911X_CS 1 +#define LDP_SMSC911X_GPIO 152 #define DEBUG_BASE 0x08000000 #define LDP_ETHR_START DEBUG_BASE -static struct resource ldp_smc911x_resources[] = { +static struct resource ldp_smsc911x_resources[] = { [0] = { .start = LDP_ETHR_START, .end = LDP_ETHR_START + SZ_4K, @@ -59,40 +60,50 @@ static struct resource ldp_smc911x_resources[] = { }, }; -static struct platform_device ldp_smc911x_device = { - .name = "smc911x", +static struct smsc911x_platform_config ldp_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device ldp_smsc911x_device = { + .name = "smsc911x", .id = -1, - .num_resources = ARRAY_SIZE(ldp_smc911x_resources), - .resource = ldp_smc911x_resources, + .num_resources = ARRAY_SIZE(ldp_smsc911x_resources), + .resource = ldp_smsc911x_resources, + .dev = { + .platform_data = &ldp_smsc911x_config, + }, }; static struct platform_device *ldp_devices[] __initdata = { - &ldp_smc911x_device, + &ldp_smsc911x_device, }; -static inline void __init ldp_init_smc911x(void) +static inline void __init ldp_init_smsc911x(void) { int eth_cs; unsigned long cs_mem_base; int eth_gpio = 0; - eth_cs = LDP_SMC911X_CS; + eth_cs = LDP_SMSC911X_CS; if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc911x\n"); + printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); return; } - ldp_smc911x_resources[0].start = cs_mem_base + 0x0; - ldp_smc911x_resources[0].end = cs_mem_base + 0xff; + ldp_smsc911x_resources[0].start = cs_mem_base + 0x0; + ldp_smsc911x_resources[0].end = cs_mem_base + 0xff; udelay(100); - eth_gpio = LDP_SMC911X_GPIO; + eth_gpio = LDP_SMSC911X_GPIO; - ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); + ldp_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - if (gpio_request(eth_gpio, "smc911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", + if (gpio_request(eth_gpio, "smsc911x irq") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", eth_gpio); return; } @@ -104,7 +115,7 @@ static void __init omap_ldp_init_irq(void) omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); - ldp_init_smc911x(); + ldp_init_smsc911x(); } static struct omap_uart_config ldp_uart_config __initdata = { diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b3f6e9d8180..b1f23bea863 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -57,6 +57,9 @@ #define GPMC_CS0_BASE 0x60 #define GPMC_CS_SIZE 0x30 +#define OVERO_SMSC911X_CS 5 +#define OVERO_SMSC911X_GPIO 176 + #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) @@ -116,6 +119,67 @@ static void __init overo_ads7846_init(void) static inline void __init overo_ads7846_init(void) { return; } #endif +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) + +#include <linux/smsc911x.h> + +static struct resource overo_smsc911x_resources[] = { + { + .name = "smsc911x-memory", + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config overo_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT , + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device overo_smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(overo_smsc911x_resources), + .resource = &overo_smsc911x_resources, + .dev = { + .platform_data = &overo_smsc911x_config, + }, +}; + +static inline void __init overo_init_smsc911x(void) +{ + unsigned long cs_mem_base; + + if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n"); + return; + } + + overo_smsc911x_resources[0].start = cs_mem_base + 0x0; + overo_smsc911x_resources[0].end = cs_mem_base + 0xff; + + if ((gpio_request(OVERO_SMSC911X_GPIO, "SMSC911X IRQ") == 0) && + (gpio_direction_input(OVERO_SMSC911X_GPIO) == 0)) { + gpio_export(OVERO_SMSC911X_GPIO, 0); + } else { + printk(KERN_ERR "could not obtain gpio for SMSC911X IRQ\n"); + return; + } + + overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO); + overo_smsc911x_resources[1].end = 0; + + platform_device_register(&overo_smsc911x_device); +} + +#else +static inline void __init overo_init_smsc911x(void) { return; } +#endif + static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -290,6 +354,7 @@ static void __init overo_init(void) overo_flash_init(); usb_musb_init(); overo_ads7846_init(); + overo_init_smsc911x(); if ((gpio_request(OVERO_GPIO_W2W_NRESET, "OVERO_GPIO_W2W_NRESET") == 0) && diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index f46698e20c1..6112740b4ae 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -380,14 +380,49 @@ static struct pca953x_platform_data pca9536_data = { .gpio_base = NR_BUILTIN_GPIO + 1, }; -static struct soc_camera_link iclink[] = { - { - .bus_id = 0, /* Must match with the camera ID above */ - .gpio = NR_BUILTIN_GPIO + 1, - }, { - .bus_id = 0, /* Must match with the camera ID above */ - .gpio = -ENXIO, +static int gpio_bus_switch; + +static int pcm990_camera_set_bus_param(struct soc_camera_link *link, + unsigned long flags) +{ + if (gpio_bus_switch <= 0) { + if (flags == SOCAM_DATAWIDTH_10) + return 0; + else + return -EINVAL; + } + + if (flags & SOCAM_DATAWIDTH_8) + gpio_set_value(gpio_bus_switch, 1); + else + gpio_set_value(gpio_bus_switch, 0); + + return 0; +} + +static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link) +{ + int ret; + + if (!gpio_bus_switch) { + ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera"); + if (!ret) { + gpio_bus_switch = NR_BUILTIN_GPIO + 1; + gpio_direction_output(gpio_bus_switch, 0); + } else + gpio_bus_switch = -EINVAL; } + + if (gpio_bus_switch > 0) + return SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_10; + else + return SOCAM_DATAWIDTH_10; +} + +static struct soc_camera_link iclink = { + .bus_id = 0, /* Must match with the camera ID above */ + .query_bus_param = pcm990_camera_query_bus_param, + .set_bus_param = pcm990_camera_set_bus_param, }; /* Board I2C devices. */ @@ -398,10 +433,10 @@ static struct i2c_board_info __initdata pcm990_i2c_devices[] = { .platform_data = &pca9536_data, }, { I2C_BOARD_INFO("mt9v022", 0x48), - .platform_data = &iclink[0], /* With extender */ + .platform_data = &iclink, /* With extender */ }, { I2C_BOARD_INFO("mt9m001", 0x5d), - .platform_data = &iclink[0], /* With extender */ + .platform_data = &iclink, /* With extender */ }, }; #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */ diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index d6766685cfc..9ab947c14f2 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -28,7 +28,7 @@ #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/io.h> -#include <linux/smc911x.h> +#include <linux/smsc911x.h> #include <linux/ata_platform.h> #include <asm/clkdev.h> @@ -128,14 +128,15 @@ int realview_flash_register(struct resource *res, u32 num) return platform_device_register(&realview_flash_device); } -static struct smc911x_platdata realview_smc911x_platdata = { - .flags = SMC911X_USE_32BIT, - .irq_flags = IRQF_SHARED, - .irq_polarity = 1, +static struct smsc911x_platform_config smsc911x_config = { + .flags = SMSC911X_USE_32BIT, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .phy_interface = PHY_INTERFACE_MODE_MII, }; static struct platform_device realview_eth_device = { - .name = "smc911x", + .name = "smsc911x", .id = 0, .num_resources = 2, }; @@ -145,8 +146,8 @@ int realview_eth_register(const char *name, struct resource *res) if (name) realview_eth_device.name = name; realview_eth_device.resource = res; - if (strcmp(realview_eth_device.name, "smc911x") == 0) - realview_eth_device.dev.platform_data = &realview_smc911x_platdata; + if (strcmp(realview_eth_device.name, "smsc911x") == 0) + realview_eth_device.dev.platform_data = &smsc911x_config; return platform_device_register(&realview_eth_device); } diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c index 67d6d9cc68b..d0d39adf640 100644 --- a/arch/arm/mach-realview/localtimer.c +++ b/arch/arm/mach-realview/localtimer.c @@ -191,6 +191,7 @@ void __cpuinit local_timer_setup(void) clk->name = "dummy_timer"; clk->features = CLOCK_EVT_FEAT_DUMMY; clk->rating = 200; + clk->mult = 1; clk->set_mode = dummy_timer_set_mode; clk->broadcast = smp_timer_broadcast; clk->cpumask = cpumask_of(cpu); diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index 94077fbd96b..6f7e70907e4 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -29,10 +29,10 @@ ENTRY(v6_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR /* - * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR. + * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR (erratum 326103). * The test below covers all the write situations, including Java bytecodes */ - bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR + bic r1, r1, #1 << 11 @ clear bit 11 of FSR tst r3, #PSR_J_BIT @ Java? movne pc, lr do_thumb_abort diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index d6dd83826f8..6e77c042d8e 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -115,6 +115,10 @@ static inline void l2_inv_pa_range(unsigned long start, unsigned long end) raw_local_irq_restore(flags); } +static inline void l2_inv_all(void) +{ + __asm__("mcr p15, 1, %0, c15, c11, 0" : : "r" (0)); +} /* * Linux primitives. @@ -254,9 +258,7 @@ static void __init enable_dcache(void) static void __init __invalidate_icache(void) { - int dummy; - - __asm__ __volatile__("mcr p15, 0, %0, c7, c5, 0" : "=r" (dummy)); + __asm__("mcr p15, 0, %0, c7, c5, 0" : : "r" (0)); } static int __init invalidate_and_disable_icache(void) @@ -321,6 +323,7 @@ static void __init enable_l2(void) d = flush_and_disable_dcache(); i = invalidate_and_disable_icache(); + l2_inv_all(); write_extra_features(u | 0x00400000); if (i) enable_icache(); diff --git a/arch/arm/plat-mxc/include/mach/mx3_camera.h b/arch/arm/plat-mxc/include/mach/mx3_camera.h new file mode 100644 index 00000000000..36d7ff27b5e --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx3_camera.h @@ -0,0 +1,52 @@ +/* + * mx3_camera.h - i.MX3x camera driver header file + * + * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _MX3_CAMERA_H_ +#define _MX3_CAMERA_H_ + +#include <linux/device.h> + +#define MX3_CAMERA_CLK_SRC 1 +#define MX3_CAMERA_EXT_VSYNC 2 +#define MX3_CAMERA_DP 4 +#define MX3_CAMERA_PCP 8 +#define MX3_CAMERA_HSP 0x10 +#define MX3_CAMERA_VSP 0x20 +#define MX3_CAMERA_DATAWIDTH_4 0x40 +#define MX3_CAMERA_DATAWIDTH_8 0x80 +#define MX3_CAMERA_DATAWIDTH_10 0x100 +#define MX3_CAMERA_DATAWIDTH_15 0x200 + +#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \ + MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15) + +/** + * struct mx3_camera_pdata - i.MX3x camera platform data + * @flags: MX3_CAMERA_* flags + * @mclk_10khz: master clock frequency in 10kHz units + * @dma_dev: IPU DMA device to match against in channel allocation + */ +struct mx3_camera_pdata { + unsigned long flags; + unsigned long mclk_10khz; + struct device *dma_dev; +}; + +#endif diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index ba592a9e6fb..a2bed62aec2 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -15,13 +15,16 @@ * r10 = thread_info structure * lr = failure return */ -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/asm-offsets.h> -#include <asm/assembler.h> +#include <asm/thread_info.h> #include <asm/vfpmacros.h> +#include "../kernel/entry-header.S" ENTRY(do_vfp) +#ifdef CONFIG_PREEMPT + ldr r4, [r10, #TI_PREEMPT] @ get preempt count + add r11, r4, #1 @ increment it + str r11, [r10, #TI_PREEMPT] +#endif enable_irq ldr r4, .LCvfp ldr r11, [r10, #TI_CPU] @ CPU number @@ -30,6 +33,12 @@ ENTRY(do_vfp) ENDPROC(do_vfp) ENTRY(vfp_null_entry) +#ifdef CONFIG_PREEMPT + get_thread_info r10 + ldr r4, [r10, #TI_PREEMPT] @ get preempt count + sub r11, r4, #1 @ decrement it + str r11, [r10, #TI_PREEMPT] +#endif mov pc, lr ENDPROC(vfp_null_entry) @@ -41,6 +50,12 @@ ENDPROC(vfp_null_entry) __INIT ENTRY(vfp_testing_entry) +#ifdef CONFIG_PREEMPT + get_thread_info r10 + ldr r4, [r10, #TI_PREEMPT] @ get preempt count + sub r11, r4, #1 @ decrement it + str r11, [r10, #TI_PREEMPT] +#endif ldr r0, VFP_arch_address str r5, [r0] @ known non-zero value mov pc, r9 @ we have handled the fault diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index a5a4e57763c..83c4e384b16 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -137,6 +137,12 @@ check_for_exception: VFPFMXR FPEXC, r1 @ restore FPEXC last sub r2, r2, #4 str r2, [sp, #S_PC] @ retry the instruction +#ifdef CONFIG_PREEMPT + get_thread_info r10 + ldr r4, [r10, #TI_PREEMPT] @ get preempt count + sub r11, r4, #1 @ decrement it + str r11, [r10, #TI_PREEMPT] +#endif mov pc, r9 @ we think we have handled things @@ -155,6 +161,12 @@ look_for_VFP_exceptions: @ not recognised by VFP DBGSTR "not VFP" +#ifdef CONFIG_PREEMPT + get_thread_info r10 + ldr r4, [r10, #TI_PREEMPT] @ get preempt count + sub r11, r4, #1 @ decrement it + str r11, [r10, #TI_PREEMPT] +#endif mov pc, lr process_exception: diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 75457b30d81..01599c4ef72 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -266,7 +266,7 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) * on VFP subarch 1. */ vfp_raise_exceptions(VFP_EXCEPTION_ERROR, trigger, fpscr, regs); - return; + goto exit; } /* @@ -297,7 +297,7 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) * the FPEXC.FP2V bit is valid only if FPEXC.EX is 1. */ if (fpexc ^ (FPEXC_EX | FPEXC_FP2V)) - return; + goto exit; /* * The barrier() here prevents fpinst2 being read @@ -310,6 +310,8 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) exceptions = vfp_emulate_instruction(trigger, orig_fpscr, regs); if (exceptions) vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs); + exit: + preempt_enable(); } static void vfp_enable(void *unused) |